Uwe Kleine-König [Thu, 10 Feb 2011 10:16:08 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "memory"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:07 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "management"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:06 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "initiali[zs]e"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:05 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "implementation"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:04 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "function"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:03 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "failed"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:02 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "consistent"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:01 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "adjust"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:16:00 +0000 (11:16 +0100)]
staging/trivial: fix typos concerning "address"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Uwe Kleine-König [Thu, 10 Feb 2011 10:15:59 +0000 (11:15 +0100)]
staging/trivial: fix typos concerning "access"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:16 +0000 (13:13 -0800)]
staging: ath6kl: Fixing disappearing of scan list due to jiffies wrap over
When jiffies wrap-over, all the BSS in the cache is removed. Wrap-over of
jiffies is not handled in the correct way. This cause the scan list to go
empty during this time for a small duration
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:15 +0000 (13:13 -0800)]
staging: ath6kl: Fixing accidental overwriting of probed ssid list in the hardware
Fixing the code to avoid overwriting of the first index in the probed ssid
list maintained by the hardware. This index is used to store broadcast SSID.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:14 +0000 (13:13 -0800)]
staging: ath6kl: Adding state in driver to track the sme state
Adding state in driver to track the sme state. The connect/disconnect
events from the driver were messing up the state maintained within the
cfg80211 module.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:13 +0000 (13:13 -0800)]
staging: ath6kl: Fixing the cached copy of the BSS filter set by user
Fixing the cached copy of the BSS filter set by user.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:12 +0000 (13:13 -0800)]
staging: ath6kl: Fixing memory leak
The patch fixes a mismatch in the allocation and free of scatter HIF bus
requests in the suspend/resume path.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:11 +0000 (13:13 -0800)]
staging: ath6kl: Add configuration for excessive TX retry threshold
Adding host side interface to configure the excessive TX retry threshold.
It is used by the target to determine disconnection triggers. Additionally,
some definitions have been added to header file wmi.h to bridge the gap
for the newly added command.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:10 +0000 (13:13 -0800)]
staging: ath6kl: Fixing a memory leak
Fix for a memory leak discovered during suspend/resume testing.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:09 +0000 (13:13 -0800)]
staging: ath6kl: Fixing a memory leak
Virtual Scatter Gather Lists not getting freed during the HTCStop(). The
patch adds some clean up code in the code path.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:08 +0000 (13:13 -0800)]
staging: ath6kl: Adding support for txop bursting enable/disable
Adding compile time support for enabling/disabling txop bursting.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:07 +0000 (13:13 -0800)]
staging: ath6kl: Consolidating hardware configuration
Move all the wmi configuration commands done after wmi_ready to a single
function.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:06 +0000 (13:13 -0800)]
staging: ath6kl: Fixing driver initialization for manufacturing mode
Fixing the driver initialization for manufacturing mode that involves
downloading a firmware binary meant for RF tests on the factory floor.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:05 +0000 (13:13 -0800)]
staging: ath6kl: Fixing target crash due to mismatch connect/disconnect
Firmware design requires a WMI_DISCONNECT_CMD for every WMI_CONNECT_CMD to
clear the firmware previous profile state. There is one case in linux host
driver where two WMI_CONNECT_CMD are given without a WMI_DISCONNECT_CMD.
This causes firmware state to mismatch causing an ASSERT. Use the driver
state variable arConnectPending to track whether a WMI_CONNECT_CMD is
issued to firmware.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:04 +0000 (13:13 -0800)]
staging: ath6kl: Return correct scan complete status
Return correct scan complete status to the cfg80211 module based on
the value returned from the hardware.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:03 +0000 (13:13 -0800)]
staging: ath6kl: Fixing key settings for WPA/WPA2
A bug was observed during the reconnection phase in the WPA/WPA2-PSK scenario
where the EAPOL frames were going encrypted during an auto reconnection
attempt. The initial 4-way handshake would go fine but then the driver
was getting a command to set default keys sometime later. Setting of an
incorrect flag (TX_USAGE) in the hadrware was causing the EAPOL frames during
the subsequent 4-way handshake attempts to go encrypted causing the AP to
reject the station.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vipin Mehta [Fri, 18 Feb 2011 21:13:02 +0000 (13:13 -0800)]
staging: ath6kl: Fixing a NULL pointer exception
The driver was dereferencing a NULL pointer because of the device instance
being registered via the set_wiphy_dev() function. The function
ar6000_avail_ev() was passing the argument as NULL instead of using the one
returned by the MMC stack through the probe callback.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jerome Marchand [Thu, 17 Feb 2011 16:11:49 +0000 (17:11 +0100)]
Staging: zram: initialize device on first read
Currently the device is initialized when first write is done to the
device. Any read attempt before the first write would fail, including
"hidden" read the user may not know about (as for example if he tries
to write a partial block).
This patch initializes the device on first request, whether read or
write.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasiliy Kulikov [Thu, 10 Feb 2011 18:00:39 +0000 (21:00 +0300)]
staging: zcache: fix memory leak
obj is not freed if __get_free_page() failed.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:20:02 +0000 (14:20 +0000)]
staging:iio:gyro:adis16130 stub removal and cleanup
Get rid of unused stubs for trigger and buffer support.
Fix line length issues.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:20:01 +0000 (14:20 +0000)]
staging:iio:gyro:adis16080 unused stub removal and cleanup
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:20:00 +0000 (14:20 +0000)]
staging:iio:gyro:adis16060 cleanup and dead code removal
Removed stubs related to buffering and triggering. Put them back
when they are actually needed.
Fixed line length issues.
Made a number of functions static as no longer in header.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:07:43 +0000 (14:07 +0000)]
staging:iio:meter remove stubs from ade7854.
General cleanup and use of standard functions to simplfy some spi reads
as well.
Also added a device id table to the spi version.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:07:42 +0000 (14:07 +0000)]
staging:iio:meter remove stubs from ade7759.
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:07:41 +0000 (14:07 +0000)]
staging:iio:meter remove stubs from ade7754.
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 14:07:40 +0000 (14:07 +0000)]
staging:iio:meter remove stubs from ade7753.
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 13:09:13 +0000 (13:09 +0000)]
staging:iio: buffer example - add lots more runtime parameters
Add ability to control delay for event free buffers
Add ability to control length of buffer
Add ability to control how many read cycles occur
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 13:09:12 +0000 (13:09 +0000)]
staging:iio: update example to handle case with no ring events
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 13:09:11 +0000 (13:09 +0000)]
staging:iio:lis3l02dq allow buffer implementation selection
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 13:09:10 +0000 (13:09 +0000)]
staging:iio:kfifo buffer implementation
A very simple use of a kfifo as an alternative for the ring_sw
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 11 Feb 2011 13:09:09 +0000 (13:09 +0000)]
staging:iio:buffering move the copy to user on rip down into implementations
The current interface is not as adaptable as it should be. Moving
this complexity into the implementations makes it easier to add
new implementations.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tony SIM [Tue, 15 Feb 2011 10:10:27 +0000 (19:10 +0900)]
staging: iio: ak8975: add platform data.
As some of the platform not support irq_to_gpio, we pass gpio port
by platform data.
Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com>
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brown [Tue, 15 Feb 2011 00:15:25 +0000 (16:15 -0800)]
staging: msm: Use explicit GPLv2 licenses
Replace a BSD-style license in Code Aurora Forum authored files with
an explicit GPLv2.
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Javier Martinez Canillas [Sat, 12 Feb 2011 03:38:25 +0000 (04:38 +0100)]
Staging: bcm: Bcmchar: Fix some checkpatch errors
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Javier Martinez Canillas [Sat, 12 Feb 2011 03:38:24 +0000 (04:38 +0100)]
Staging: bcm: Bcmchar: Fix style issues on bcm_char_read()
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Javier Martinez Canillas [Sat, 12 Feb 2011 03:38:23 +0000 (04:38 +0100)]
Staging: bcm: Bcmchar: Fix style issues on bcm_char_release()
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Javier Martinez Canillas [Sat, 12 Feb 2011 03:38:22 +0000 (04:38 +0100)]
Staging: bcm: Bcmchar: Fix style issues on bcm_char_open()
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hank Janssen [Fri, 18 Feb 2011 20:39:57 +0000 (12:39 -0800)]
Staging: hv: Fixed FIXME comments by using list_for_each_entry
Fixed FIXME requests in channel_mgmt.c by using
list_for_each_entry.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: K.Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Haiyang Zhang [Mon, 14 Feb 2011 22:51:42 +0000 (14:51 -0800)]
staging: hv: Remove dead code from rndis_filter.c
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Haiyang Zhang [Mon, 14 Feb 2011 22:51:41 +0000 (14:51 -0800)]
staging: hv: Remove dead code from netvsc.c
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 11 Feb 2011 22:48:45 +0000 (14:48 -0800)]
Staging: hv: Cleanup vmalloc calls
The subject says it all. There is no need to
specify different page protection bits based
on the architecture.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 11 Feb 2011 18:00:12 +0000 (10:00 -0800)]
Staging: hv: Remove osd layer
The OSD layer was a wrapper around native interfaces
adding little value and was infact buggy -
refer to the osd_wait.patch for details.
This patch gets rid of the OSD abstraction.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 11 Feb 2011 17:59:43 +0000 (09:59 -0800)]
Staging: hv: Use native wait primitives
In preperation for getting rid of the osd layer; change
the code to use native wait interfaces. As part of this,
fixed the buggy implementation in the osd_wait_primitive
where the condition was cleared potentially after the
condition was signalled.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 11 Feb 2011 17:59:00 +0000 (09:59 -0800)]
Staging: hv: Use native page allocation/free functions
In preperation for getting rid of the osd.[ch] files;
change all page allocation/free functions to use native interfaces.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 15 Feb 2011 11:35:40 +0000 (12:35 +0100)]
staging: brcm80211: improved checks on incompatible firmware
The return status of wl_ucode_init_buf() is now being used. Also a bug in
firmware validation, which could lead to incompatible firmware not being
rejected by the driver, has been fixed. Comment from Dan Carpenter on using
negative error values has been incorporated in this commit.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 15 Feb 2011 10:13:51 +0000 (11:13 +0100)]
staging: brcm80211: bugfix for stack dump on firmware load problems
If there is a problem with the firmware load (eg, firmware not present in
/lib/firmware/brcm), then the driver would dump its stack instead of bailing
out gracefully. Root cause was an uninitialized variable (wl->pub) being
dereferenced in the rfkill portion of a cleanup routine (wl_remove). Fix was
to move the rfkill calls into the correct spot in wl_remove().
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 15 Feb 2011 10:13:50 +0000 (11:13 +0100)]
staging: brcm80211: bugfix for oops on firmware load problems
Upon firmware load failure, wl_release_fw() was called multiple
times. This caused the driver to oops. Solution was to remove redundant
wl_release_fw() calls.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislav Fomichev [Mon, 14 Feb 2011 22:05:10 +0000 (01:05 +0300)]
staging: brcm80211: replace bcopy with memcpy
Use native linux memcpy instead of legacy bcopy
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stanislav Fomichev [Mon, 14 Feb 2011 22:05:09 +0000 (01:05 +0300)]
staging: brcm80211: use %zu instead of %d for size_t
Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Mon, 14 Feb 2011 11:16:47 +0000 (12:16 +0100)]
staging: brcm80211: removed unused code because of mac rev cleanup
Code cleanup. Removed more defines, data structures and functions that were
unused because this driver supports mac core rev 22 and up. Got rid of redundant
brackets in wlc_bmac_txstatus() by moving locally defined variables above {}
scope.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Mon, 14 Feb 2011 11:16:46 +0000 (12:16 +0100)]
staging: brcm80211: removed obsolete comments
Code cleanup. Only mac core revisions 22 and higher are supported, therefore
comment related to older mac revisions was removed.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Mon, 14 Feb 2011 11:16:45 +0000 (12:16 +0100)]
staging: brcm80211: removal of inactive d11 code
Code cleanup. Removed code that was never invoked because the mac core
revision supported is always higher than 22.
Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 14:27:46 +0000 (15:27 +0100)]
staging: brcm80211: remove declaration of unused string array
The constant array declaration aci_names is not referenced
anywhere in the code so it has been removed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 14:27:45 +0000 (15:27 +0100)]
staging: brcm80211: remove #ifdef BCMDBG from regular functions
Under error condition debug functions are being called which
only have implementation when BCMDBG is defined. This result
in #ifdef BCMDBG blocks in functions. This patch fixes this by
mapping the debug functions to empty macro when BCMDBG is not
defined. This makes the calling function easier to read.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 14:27:44 +0000 (15:27 +0100)]
staging: brcm80211: remove warning introduced by rfkill implementation
During rfkill implementation the content of wlc_radio_upd function
was removed for testing purposes only. This ended up in the patch
sent out. This commit restores the function content, which was the
only function calling static function wlc_radio_enable. This removes
the compilation warning observed.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:52 +0000 (12:03 +0100)]
staging: brcm80211: remove unnecessary cast in wlc_d11hdrs_mac80211
memset prototype specifies a void pointer as buffer. Conversion from
any pointer type to void pointer does not require an explicit cast.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:51 +0000 (12:03 +0100)]
staging: brcm80211: store BSSID in driver config information
When mac80211 informs about new BSSID this was configured toward
the hardware device, but the information is also needed inside
the driver itself. This patch takes care of that.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:50 +0000 (12:03 +0100)]
staging: brcm80211: set beacon interval as provided by mac80211
Driver now follows beacon interval as set by mac80211 callback.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:49 +0000 (12:03 +0100)]
staging: brcm80211: store HT operation mode settings from mac80211
The HT operation mode is provided by mac80211 and they are now
stored in the driver.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:48 +0000 (12:03 +0100)]
staging: brcm80211: handle change in association state from mac80211
The driver has flags for association state which are now being set
according to notification from mac80211.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:47 +0000 (12:03 +0100)]
staging: brcm80211: cleanup mac80211 callback bss_info_changed
The implementation for bss_info_changed was not handling all
changes as provided by mac80211 module. These have been added
and will log message with changed parameters.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:46 +0000 (12:03 +0100)]
staging: brcm80211: enable driver counter functionality
The 802.11 core in the chipsets provides counters that are now
used to provide counter values to mac80211 through get_stats
callback. Counters related to ampdu and wmm (aka. wme) are not
yet incorporated.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:45 +0000 (12:03 +0100)]
staging: brcm80211: fix potential null pointer access handling ucode buffer
Allocation of buffer in function wl_ucode_init_buf can fail. This was
signalled by an error message, but code continued to access the null
pointer. This is now avoided by jumping to failure label.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:44 +0000 (12:03 +0100)]
staging: brcm80211: remove usage of printf (macro) from driver
The driver contained several calls to printf which was mapped
to printk using a macro. These have been changed to explicit
call to printk or use an appropropriate macro.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:43 +0000 (12:03 +0100)]
staging: brcm80211: return error code to mac80211 for 40MHz channels
When mac80211 attempts to configure the driver for 40MHz channel it
will return an error code -EIO as this is not yet supported.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:42 +0000 (12:03 +0100)]
staging: brcm80211: decrease level of non-error messages
Non-error messages which were printed using WL_ERROR macro
were decreased to WL_NONE (which is a no_printk) or WL_TRACE
level macros. mac80211 callbacks that are not handled by the
driver are printed with WL_ERROR.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Thu, 10 Feb 2011 11:03:41 +0000 (12:03 +0100)]
staging: brcm80211: use consistent naming for mac80211 callbacks
Most mac80211 callbacks were named using prefix 'wl_ops' except
for a few. These have been aligned to use the prefix as well.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Tue, 15 Feb 2011 12:15:20 +0000 (14:15 +0200)]
staging/easycap: use %p for printing pointers
use %p instead of %X
drop casting of pointer to long long int
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Tue, 15 Feb 2011 12:15:19 +0000 (14:15 +0200)]
staging/easycap: drop EASYCAP_NEEDS_USBVIDEO_H
remove pointless compilation flag
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Tue, 15 Feb 2011 12:15:18 +0000 (14:15 +0200)]
staging/easycap: kill EASYCAP_NEEDS_V4L2_DEVICE_H and EASYCAP_NEEDS_V4L2_FOPS
EASYCAP_NEEDS_V4L2_DEVICE_H and EASYCAP_NEEDS_V4L2_FOPS are required in
in-tree driver
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Thu, 10 Feb 2011 12:55:24 +0000 (14:55 +0200)]
staging/easycap: style changes in easycap_low.c
remove uneedet brackets in ifs and switches
drop pointless castings
other small fixes
Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Thu, 10 Feb 2011 12:55:23 +0000 (14:55 +0200)]
staging/easycap: don't mask return value of usb_control_msg() by 0xFF
masking return value of usb_control_msg() will mask negative
error values into positive.
Cc: Mike Thomas <rmthomas@sciolus.org>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Thu, 10 Feb 2011 12:55:22 +0000 (14:55 +0200)]
staging/easycap: add first level indetnation for easycap_low.c
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aaro Koskinen [Thu, 17 Feb 2011 21:29:17 +0000 (23:29 +0200)]
staging: xgifb: eliminate a global variable
Move the XGIfb_mmio_size global variable into the video_info struct.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aaro Koskinen [Thu, 17 Feb 2011 21:29:16 +0000 (23:29 +0200)]
staging: xgifb: clean up xgifb_remove()
Delete redudant comments, blank lines and a redundant semicolon.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aaro Koskinen [Thu, 17 Feb 2011 21:29:15 +0000 (23:29 +0200)]
staging: xgifb: release and unmap I/O memory
Release and unmap memory on probe error paths and when the module
is removed.
The patch enables unloading and reloading the xgifb module.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aaro Koskinen [Thu, 17 Feb 2011 21:29:14 +0000 (23:29 +0200)]
staging: xgifb: replace XGINew_LCD_Wait_Time() with mdelay()
XGINew_LCD_Wait_Time() is implemented using the I/O port 0x61, which is
X86-specific and will fail on other platforms. The code did not make any
sense, but I guess the intention has been to provide a function where
the unit for the delay is milliseconds.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aaro Koskinen [Thu, 17 Feb 2011 21:29:13 +0000 (23:29 +0200)]
staging: xgifb: copy PCI ROM properly
Use proper helper functions to copy the PCI ROM. Also use dynamic memory
allocation. The original code mapped incorrect amount of memory and will
crash on some platforms.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aaro Koskinen [Thu, 17 Feb 2011 21:29:12 +0000 (23:29 +0200)]
staging: xgifb: fix some memory leaks
Some xgifb_probe() error paths are missing proper vfree()s. Move them
all into a single place.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Aaro Koskinen [Thu, 17 Feb 2011 21:29:11 +0000 (23:29 +0200)]
staging: xgifb: xgifb_probe() error paths missing framebuffer_release()
framebuffer_release() is missing from error paths.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Krzysztof Hałasa [Fri, 11 Feb 2011 12:38:20 +0000 (13:38 +0100)]
staging: Solo6x10: Changed solo6010* -> solo*, solo6x10* etc.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Krzysztof Hałasa [Fri, 11 Feb 2011 12:36:27 +0000 (13:36 +0100)]
staging: Solo6x10: Stripped "solo6010-" from file names.
This driver supports both Solo-6010 and Solo-6110 chips anyway.
Renamed solo6010.h -> solo6x10.h.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Krzysztof Hałasa [Fri, 11 Feb 2011 12:33:26 +0000 (13:33 +0100)]
staging: Solo6x10: remove unneeded __solo parameter from SOLO_*_EXT_ADDR macros.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Krzysztof Hałasa [Fri, 11 Feb 2011 12:32:11 +0000 (13:32 +0100)]
staging: Solo6x10: Add support for SOLO6110 chip.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Krzysztof Hałasa [Fri, 11 Feb 2011 12:29:59 +0000 (13:29 +0100)]
staging: Solo6x10: Align MPEG video on 8-byte boundary instead of 32-byte.
Solo-6110 only supports 8-byte alignment anyway.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Krzysztof Hałasa [Fri, 11 Feb 2011 12:25:00 +0000 (13:25 +0100)]
staging: Solo6x10: Build MPEG4 headers on the fly.
This will make them maintainable. Also, it now works on big-endian systems.
This is the slow path (done every 1+ second, per channel) so I guess
there is no need to cache the results.
I have removed CBR-related bits from the MPEG4 VOL header since we can't
do CBR (at least yet).
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Krzysztof Hałasa [Fri, 11 Feb 2011 12:10:30 +0000 (13:10 +0100)]
staging: Solo6x10: accept WxH >= screen dimentions.
This makes it possible to request full resolution (704x576 or 704x480)
independently of the color system used (PAL or NTSC).
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Thu, 10 Feb 2011 23:46:14 +0000 (08:46 +0900)]
staging: rtl8192e: Remove unused CONFIG_RTL8180_IO_MAP
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Thu, 10 Feb 2011 23:45:45 +0000 (08:45 +0900)]
staging: rtl8192e: Don't disable interrupts in mgmt_tx_lock
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Thu, 10 Feb 2011 23:45:27 +0000 (08:45 +0900)]
staging: rtl8192e: Refactor rtl8192_ioctl into two functions
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Thu, 10 Feb 2011 23:45:03 +0000 (08:45 +0900)]
staging: rtl8192e: rf_ps_lock doesn't need to be IRQ safe
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike McCormack [Thu, 10 Feb 2011 23:44:44 +0000 (08:44 +0900)]
staging: rtl8192e: Remove useless TxCheckStuck function
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>