Xiubo Li [Tue, 17 Sep 2019 11:56:05 +0000 (17:26 +0530)]
nbd: rename the runtime flags as NBD_RT_ prefixed
Preparing for the destory when disconnecting crash fixing.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Paolo Valente [Thu, 22 Aug 2019 15:20:37 +0000 (17:20 +0200)]
block, bfq: push up injection only after setting service time
If equal to 0, the injection limit for a bfq_queue is pushed to 1
after a first sample of the total service time of the I/O requests of
the queue is computed (to allow injection to start). Yet, because of a
mistake in the branch that performs this action, the push may happen
also in some other case. This commit fixes this issue.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Paolo Valente [Thu, 22 Aug 2019 15:20:36 +0000 (17:20 +0200)]
block, bfq: increase update frequency of inject limit
The update period of the injection limit has been tentatively set to
100 ms, to reduce fluctuations. This value however proved to cause,
occasionally, the limit to be decremented for some bfq_queue only
after the queue underwent excessive injection for a lot of time. This
commit reduces the period to 10 ms.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Paolo Valente [Thu, 22 Aug 2019 15:20:35 +0000 (17:20 +0200)]
block, bfq: reduce upper bound for inject limit to max_rq_in_driver+1
Upon an increment attempt of the injection limit, the latter is
constrained not to become higher than twice the maximum number
max_rq_in_driver of I/O requests that have happened to be in service
in the drive. This high bound allows the injection limit to grow
beyond max_rq_in_driver, which may then cause max_rq_in_driver itself
to grow.
However, since the limit is incremented by only one unit at a time,
there is no need for such a high bound, and just max_rq_in_driver+1 is
enough.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Paolo Valente [Thu, 22 Aug 2019 15:20:34 +0000 (17:20 +0200)]
block, bfq: update inject limit only after injection occurred
BFQ updates the injection limit of each bfq_queue as a function of how
much the limit inflates the service times experienced by the I/O
requests of the queue. So only service times affected by injection
must be taken into account. Unfortunately, in the current
implementation of this update scheme, the service time of an I/O
request rq not affected by injection may happen to be considered in
the following case: there is no I/O request in service when rq
arrives.
This commit fixes this issue by making sure that only service times
affected by injection are considered for updating the injection
limit. In particular, the service time of an I/O request rq is now
considered only if at least one of the following two conditions holds:
- the destination bfq_queue for rq underwent injection before rq
arrival, and there is still I/O in service in the drive on rq arrival
(the service of such unfinished I/O may delay the service of rq);
- injection occurs between the arrival and the completion time of rq.
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Max Gurtovoy [Mon, 16 Sep 2019 15:44:29 +0000 (18:44 +0300)]
block: centralize PI remapping logic to the block layer
Currently t10_pi_prepare/t10_pi_complete functions are called during the
NVMe and SCSi layers command preparetion/completion, but their actual
place should be the block layer since T10-PI is a general data integrity
feature that is used by block storage protocols. Introduce .prepare_fn
and .complete_fn callbacks within the integrity profile that each type
can implement according to its needs.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY
isn't defined in the config.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Max Gurtovoy [Mon, 16 Sep 2019 15:44:28 +0000 (18:44 +0300)]
block: use symbolic constants for t10_pi type
Replace all hard-coded values with T10_PI_TYPES to make the code more
readable.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Tue, 17 Sep 2019 23:57:47 +0000 (16:57 -0700)]
Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Two NVMe pull requests:
- ana log parse fix from Anton
- nvme quirks support for Apple devices from Ben
- fix missing bio completion tracing for multipath stack devices
from Hannes and Mikhail
- IP TOS settings for nvme rdma and tcp transports from Israel
- rq_dma_dir cleanups from Israel
- tracing for Get LBA Status command from Minwoo
- Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
- Some consolidation between the fabrics transports for handling
the CAP register
- reset race with ns scanning fix for fabrics (move fabrics
commands to a dedicated request queue with a different lifetime
from the admin request queue)."
- controller reset and namespace scan races fixes
- nvme discovery log change uevent support
- naming improvements from Keith
- multiple discovery controllers reject fix from James
- some regular cleanups from various people
- Series fixing (and re-fixing) null_blk debug printing and nr_devices
checks (André)
- A few pull requests from Song, with fixes from Andy, Guoqing,
Guilherme, Neil, Nigel, and Yufen.
- REQ_OP_ZONE_RESET_ALL support (Chaitanya)
- Bio merge handling unification (Christoph)
- Pick default elevator correctly for devices with special needs
(Damien)
- Block stats fixes (Hou)
- Timeout and support devices nbd fixes (Mike)
- Series fixing races around elevator switching and device add/remove
(Ming)
- sed-opal cleanups (Revanth)
- Per device weight support for BFQ (Fam)
- Support for blk-iocost, a new model that can properly account cost of
IO workloads. (Tejun)
- blk-cgroup writeback fixes (Tejun)
- paride queue init fixes (zhengbin)
- blk_set_runtime_active() cleanup (Stanley)
- Block segment mapping optimizations (Bart)
- lightnvm fixes (Hans/Minwoo/YueHaibing)
- Various little fixes and cleanups
* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
null_blk: format pr_* logs with pr_fmt
null_blk: match the type of parameter nr_devices
null_blk: do not fail the module load with zero devices
block: also check RQF_STATS in blk_mq_need_time_stamp()
block: make rq sector size accessible for block stats
bfq: Fix bfq linkage error
raid5: use bio_end_sector in r5_next_bio
raid5: remove STRIPE_OPS_REQ_PENDING
md: add feature flag MD_FEATURE_RAID0_LAYOUT
md/raid0: avoid RAID0 data corruption due to layout confusion.
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: don't increment read_errors on EILSEQ return
nvmet: fix a wrong error status returned in error log page
nvme: send discovery log page change events to userspace
nvme: add uevent variables for controller devices
nvme: enable aen regardless of the presence of I/O queues
nvme-fabrics: allow discovery subsystems accept a kato
nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
nvme: Remove redundant assignment of cq vector
nvme: Assign subsys instance from first ctrl
...
Linus Torvalds [Tue, 17 Sep 2019 23:54:40 +0000 (16:54 -0700)]
Merge tag 'for-5.4/libata-2019-09-15' of git://git.kernel.dk/linux-block
Pull libata updates from Jens Axboe:
- Kill unused export (Andy)
- Use dma_set_mask_and_coherent() throughout (Christoph)
- Drop PCS quirk on Denverton, which has different register layout
(Dan)
- Support non-boot time detection for pata_buddha (Max)
* tag 'for-5.4/libata-2019-09-15' of git://git.kernel.dk/linux-block:
libata/ahci: Drop PCS quirk for Denverton and beyond
ahci: Do not export local variable ahci_em_messages
libata: switch remaining drivers to use dma_set_mask_and_coherent
sata_sil24: use dma_set_mask_and_coherent
sata_qstor: use dma_set_mask_and_coherent
sata_nv: use dma_set_mask_and_coherent
sata_mv: use dma_set_mask_and_coherent
pdc_adma: use dma_set_mask_and_coherent
ahci: use dma_set_mask_and_coherent
acard_ahci: use dma_set_mask_and_coherent
ata/pata_buddha: Probe via modalias instead of initcall
Linus Torvalds [Tue, 17 Sep 2019 23:50:19 +0000 (16:50 -0700)]
Merge tag 'for-5.4/io_uring-2019-09-15' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- Allocate SQ/CQ ring together, more efficient. Expose this through a
feature flag as well, so we can reduce the number of mmaps by 1
(Hristo and me)
- Fix for sequence logic with SQ thread (Jackie).
- Add support for links with drain commands (Jackie).
- Improved async merging (me)
- Improved buffered async write performance (me)
- Support SQ poll wakeup + event get in single io_uring_enter() (me)
- Support larger SQ ring size. For epoll conversions, the 4k limit was
too small for some prod workloads (Daniel).
- put_user_page() usage (John)
* tag 'for-5.4/io_uring-2019-09-15' of git://git.kernel.dk/linux-block:
io_uring: increase IORING_MAX_ENTRIES to 32K
io_uring: make sqpoll wakeup possible with getevents
io_uring: extend async work merging
io_uring: limit parallelism of buffered writes
io_uring: add io_queue_async_work() helper
io_uring: optimize submit_and_wait API
io_uring: add support for link with drain
io_uring: fix wrong sequence setting logic
io_uring: expose single mmap capability
io_uring: allocate the two rings together
fs/io_uring.c: convert put_page() to put_user_page*()
Linus Torvalds [Tue, 17 Sep 2019 23:22:26 +0000 (16:22 -0700)]
Merge tag 'docs-5.4' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's a somewhat calmer cycle for docs this time, as the churn of the
mass RST conversion is happily mostly behind us.
- A new document on reproducible builds.
- We finally got around to zapping the documentation for hardware
support that was removed in 2004; one doesn't want to rush these
things.
- The usual assortment of fixes, typo corrections, etc"
* tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits)
Documentation: kbuild: Add document about reproducible builds
docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]
Documentation: Add "earlycon=sbi" to the admin guide
doc:lock: remove reference to clever use of read-write lock
devices.txt: improve entry for comedi (char major 98)
docs: mtd: Update spi nor reference driver
doc: arm64: fix grammar dtb placed in no attributes region
Documentation: sysrq: don't recommend 'S' 'U' before 'B'
mailmap: Update email address for Quentin Perret
docs: ftrace: clarify when tracing is disabled by the trace file
docs: process: fix broken link
Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title
Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command
Documentation/arm/sa1100: Remove some obsolete documentation
docs/zh_CN: update Chinese howto.rst for latexdocs making
Documentation: virt: Fix broken reference to virt tree's index
docs: Fix typo on pull requests guide
kernel-doc: Allow anonymous enum
Documentation: sphinx: Don't parse socket() as identifier reference
Documentation: sphinx: Add missing comma to list of strings
...
Linus Torvalds [Tue, 17 Sep 2019 22:58:50 +0000 (15:58 -0700)]
Merge branch 'for-5.4' of git://git./linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:
"A couple of updates to clean up the code with no change in behavior"
* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: Use struct_size() helper
percpu: fix typo in pcpu_setup_first_chunk() comment
percpu: Make pcpu_setup_first_chunk() void function
Linus Torvalds [Tue, 17 Sep 2019 22:57:22 +0000 (15:57 -0700)]
Merge branch 'for-5.4' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Three minor cleanup patches"
* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
Use kvmalloc in cgroups-v1
cgroup: minor tweak for logic to get cgroup css
cgroup: Replace a seq_printf() call by seq_puts() in cgroup_print_ss_mask()
Linus Torvalds [Tue, 17 Sep 2019 21:30:30 +0000 (14:30 -0700)]
Merge tag 'asm-generic-5.4' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Here are three small cleanup patches for the include/asm-generic
directory.
Christoph removes the __ioremap as part of a cleanup, Nico improves
the constant do_div() optimization, and Denis changes BUG_ON() to be
consistent with other implementations"
* tag 'asm-generic-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: add unlikely to default BUG_ON(x)
__div64_const32(): improve the generic C version
asm-generic: don't provide __ioremap
Linus Torvalds [Tue, 17 Sep 2019 21:27:30 +0000 (14:27 -0700)]
Merge tag 'xtensa-
20190917' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- add support for xtensa call0 ABI in userspace
- update xtensa virt board DTS for PCI root complex in KIO range
- remove free_initrd_mem
* tag 'xtensa-
20190917' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: virt: move PCI root complex to KIO range
xtensa: add support for call0 ABI in userspace
xtensa: clean up PS_WOE_BIT usage
xtensa: remove free_initrd_mem
Linus Torvalds [Tue, 17 Sep 2019 21:04:43 +0000 (14:04 -0700)]
Merge tag 's390-5.4-1' of git://git./linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for IBM z15 machines.
- Add SHA3 and CCA AES cipher key support in zcrypt and pkey
refactoring.
- Move to arch_stack_walk infrastructure for the stack unwinder.
- Various kasan fixes and improvements.
- Various command line parsing fixes.
- Improve decompressor phase debuggability.
- Lift no bss usage restriction for the early code.
- Use refcount_t for reference counters for couple of places in mm
code.
- Logging improvements and return code fix in vfio-ccw code.
- Couple of zpci fixes and minor refactoring.
- Remove some outdated documentation.
- Fix secure boot detection.
- Other various minor code clean ups.
* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390: remove pointless drivers-y in drivers/s390/Makefile
s390/cpum_sf: Fix line length and format string
s390/pci: fix MSI message data
s390: add support for IBM z15 machines
s390/crypto: Support for SHA3 via CPACF (MSA6)
s390/startup: add pgm check info printing
s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
vfio-ccw: fix error return code in vfio_ccw_sch_init()
s390: vfio-ap: fix warning reset not completed
s390/base: remove unused s390_base_mcck_handler
s390/sclp: Fix bit checked for has_sipl
s390/zcrypt: fix wrong handling of cca cipher keygenflags
s390/kasan: add kdump support
s390/setup: avoid using strncmp with hardcoded length
s390/sclp: avoid using strncmp with hardcoded length
s390/module: avoid using strncmp with hardcoded length
s390/pci: avoid using strncmp with hardcoded length
s390/kaslr: reserve memory for kasan usage
s390/mem_detect: provide single get_mem_detect_end
s390/cmma: reuse kstrtobool for option value parsing
...
Linus Torvalds [Tue, 17 Sep 2019 20:46:44 +0000 (13:46 -0700)]
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"Few small things for 5.4:
- Fixup ethoc ethernet device tree descriptors which were previously
broken, now ethernet works on FPGAs running OpenRISC!
- Switch ioremap to use uncached semantics - from Christoph Hellwig"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: map as uncached in ioremap
or1k: dts: Add ethoc device to SMP devicetree
or1k: dts: Fix ethoc network configuration in or1ksim devicetree
Linus Torvalds [Tue, 17 Sep 2019 20:34:28 +0000 (13:34 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"Only a single change, fix up header include in ColdFire specific GPIO
handling code"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire: Include the GPIO driver header
Linus Torvalds [Tue, 17 Sep 2019 19:35:15 +0000 (12:35 -0700)]
Merge branch 'timers-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core timer updates from Thomas Gleixner:
"Timers and timekeeping updates:
- A large overhaul of the posix CPU timer code which is a preparation
for moving the CPU timer expiry out into task work so it can be
properly accounted on the task/process.
An update to the bogus permission checks will come later during the
merge window as feedback was not complete before heading of for
travel.
- Switch the timerqueue code to use cached rbtrees and get rid of the
homebrewn caching of the leftmost node.
- Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
single function
- Implement the separation of hrtimers to be forced to expire in hard
interrupt context even when PREEMPT_RT is enabled and mark the
affected timers accordingly.
- Implement a mechanism for hrtimers and the timer wheel to protect
RT against priority inversion and live lock issues when a (hr)timer
which should be canceled is currently executing the callback.
Instead of infinitely spinning, the task which tries to cancel the
timer blocks on a per cpu base expiry lock which is held and
released by the (hr)timer expiry code.
- Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
resulting in faster access to timekeeping functions.
- Updates to various clocksource/clockevent drivers and their device
tree bindings.
- The usual small improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
posix-cpu-timers: Fix permission check regression
posix-cpu-timers: Always clear head pointer on dequeue
hrtimer: Add a missing bracket and hide `migration_base' on !SMP
posix-cpu-timers: Make expiry_active check actually work correctly
posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
tick: Mark sched_timer to expire in hard interrupt context
hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
posix-cpu-timers: Utilize timerqueue for storage
posix-cpu-timers: Move state tracking to struct posix_cputimers
posix-cpu-timers: Deduplicate rlimit handling
posix-cpu-timers: Remove pointless comparisons
posix-cpu-timers: Get rid of 64bit divisions
posix-cpu-timers: Consolidate timer expiry further
posix-cpu-timers: Get rid of zero checks
rlimit: Rewrite non-sensical RLIMIT_CPU comment
posix-cpu-timers: Respect INFINITY for hard RTTIME limit
posix-cpu-timers: Switch thread group sampling to array
posix-cpu-timers: Restructure expiry array
posix-cpu-timers: Remove cputime_expires
...
Linus Torvalds [Tue, 17 Sep 2019 19:04:39 +0000 (12:04 -0700)]
Merge branch 'x86-apic-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
- Cleanup the apic IPI implementation by removing duplicated code and
consolidating the functions into the APIC core.
- Implement a safe variant of the IPI broadcast mode. Contrary to
earlier attempts this uses the core tracking of which CPUs have been
brought online at least once so that a broadcast does not end up in
some dead end in BIOS/SMM code when the CPU is still waiting for
init. Once all CPUs have been brought up once, IPI broadcasting is
enabled. Before that regular one by one IPIs are issued.
- Drop the paravirt CR8 related functions as they have no user anymore
- Initialize the APIC TPR to block interrupt 16-31 as they are reserved
for CPU exceptions and should never be raised by any well behaving
device.
- Emit a warning when vector space exhaustion breaks the admin set
affinity of an interrupt.
- Make sure to use the NMI fallback when shutdown via reboot vector IPI
fails. The original code had conditions which prevent the code path
to be reached.
- Annotate various APIC config variables as RO after init.
[ The ipi broadcase change came in earlier through the cpu hotplug
branch, but I left the explanation in the commit message since it was
shared between the two different branches - Linus ]
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
x86/apic/vector: Warn when vector space exhaustion breaks affinity
x86/apic: Annotate global config variables as "read-only after init"
x86/apic/x2apic: Implement IPI shorthands support
x86/apic/flat64: Remove the IPI shorthand decision logic
x86/apic: Share common IPI helpers
x86/apic: Remove the shorthand decision logic
x86/smp: Enhance native_send_call_func_ipi()
x86/smp: Move smp_function_call implementations into IPI code
x86/apic: Provide and use helper for send_IPI_allbutself()
x86/apic: Add static key to Control IPI shorthands
x86/apic: Move no_ipi_broadcast() out of 32bit
x86/apic: Add NMI_VECTOR wait to IPI shorthand
x86/apic: Remove dest argument from __default_send_IPI_shortcut()
x86/hotplug: Silence APIC and NMI when CPU is dead
x86/cpu: Move arch_smt_update() to a neutral place
x86/apic/uv: Make x2apic_extra_bits static
x86/apic: Consolidate the apic local headers
x86/apic: Move apic_flat_64 header into apic directory
x86/apic: Move ipi header into apic directory
x86/apic: Cleanup the include maze
...
Linus Torvalds [Tue, 17 Sep 2019 18:42:15 +0000 (11:42 -0700)]
Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core irq updates from Thomas Gleixner:
"Updates from the irq departement:
- Update the interrupt spreading code so it handles numa node with
different CPU counts properly.
- A large overhaul of the ARM GiCv3 driver to support new PPI and SPI
ranges.
- Conversion of all alloc_fwnode() users to use physical addresses
instead of virtual addresses so the virtual addresses are not
leaked. The physical address is sufficient to identify the
associated interrupt chip.
- Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips.
- Enforce interrupt threading at compile time if RT is enabled.
- Small updates and improvements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
irqchip/uniphier-aidet: Use devm_platform_ioremap_resource()
irqdomain: Add the missing assignment of domain->fwnode for named fwnode
irqchip/mmp: Coexist with GIC root IRQ controller
irqchip/mmp: Mask off interrupts from other cores
irqchip/mmp: Add missing chained_irq_{enter,exit}()
irqchip/mmp: Do not use of_address_to_resource() to get mux regs
irqchip/meson-gpio: Add support for meson sm1 SoCs
dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs
genirq/affinity: Remove const qualifier from node_to_cpumask argument
genirq/affinity: Spread vectors on node according to nr_cpu ratio
genirq/affinity: Improve __irq_build_affinity_masks()
irqchip: Remove dev_err() usage after platform_get_irq()
irqchip: Add include guard to irq-partition-percpu.h
irqchip/mmp: Do not call irq_set_default_host() on DT platforms
irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map
irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum
161010803
irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks
irqchip/gic-v3: Warn about inconsistent implementations of extended ranges
irqchip/gic-v3: Add EPPI range support
...
Linus Torvalds [Tue, 17 Sep 2019 18:13:48 +0000 (11:13 -0700)]
Merge branch 'x86-irq-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 interrupt updates from Thomas Gleixner:
"A small set of changes to simplify and improve the interrupt handling
in do_IRQ() by moving the common case into common code and thereby
cleaning it up"
* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Check for VECTOR_UNUSED directly
x86/irq: Move IS_ERR_OR_NULL() check into common do_IRQ() code
x86/irq: Improve definition of VECTOR_SHUTDOWN et al
Linus Torvalds [Tue, 17 Sep 2019 18:02:21 +0000 (11:02 -0700)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 pti updates from Thomas Gleixner:
"Two small PTI updates:
- Handle unaligned addresses gracefully in pti_clone_pagetable(). Not
an issue with current callers, but a correctness problem. Adds a
warning so any caller which hands in an unaligned address gets
pointed out clearly.
- Prevent PTI functions from being invoked when PTI is disabled at
boottime. While this does not cause any harm today, it's pointless
code executed and prone to cause subtle issues if the PTI
implementation changes internally over time"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pti: Do not invoke PTI functions when PTI is disabled
x86/mm/pti: Handle unaligned address gracefully in pti_clone_pagetable()
Linus Torvalds [Tue, 17 Sep 2019 17:32:05 +0000 (10:32 -0700)]
Merge branch 'smp-hotplug-for-linus' of git://git./linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"A small update for the SMP hotplug code code:
- Track "booted once" CPUs in a cpumask so the x86 APIC code has an
easy way to decide whether broadcast IPIs are safe to use or not.
- Implement a cpumask_or_equal() helper for the IPI broadcast
evaluation.
The above two changes have been also pulled into the x86/apic
branch for implementing the conditional IPI broadcast feature.
- Cache the number of online CPUs instead of reevaluating it over and
over. num_online_cpus() is an unreliable snapshot anyway except
when it is used outside a cpu hotplug locked region. The cached
access is not changing this, but it's definitely faster than
calculating the bitmap wheight especially in hot paths"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Cache number of online CPUs
cpumask: Implement cpumask_or_equal()
smp/hotplug: Track booted once CPUs in a cpumask
Linus Torvalds [Tue, 17 Sep 2019 17:12:41 +0000 (10:12 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix to prevent the alarm timer code from returning ENOTSUPP
to user space.
ENOTSUPP is a purely kernel internal error code related to NFSv3 and
should never be handed back to user space. The risk for ABI breakage
is low as the number of systems which do not have a working RTC is
very limited"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Use EOPNOTSUPP instead of ENOTSUPP
Linus Torvalds [Tue, 17 Sep 2019 02:59:10 +0000 (19:59 -0700)]
Merge tag 'platform-drivers-x86-v5.4-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform-drivers updates from Andy Shevchenko:
- ASUS WMI driver got a couple of updates, i.e. support of FAN is fixed
for recent products and the charge threshold support has been added
- Two uknown key events for Dell laptops are being ignored now to avoid
spamming users with harmless messages
- HP ZBook 17 G5 and ASUS Zenbook UX430UNR got accelerometer support.
- Intel CherryTrail platforms had a regression with wake up. Now it's
fixed
- Intel PMC driver got fixed in order to work nicely in Xen
environment
- Intel Speed Select driver provides bucket vs core count relationship.
Besides that the tools has been updated for better output
- The PrivacyGuard is enabled on Lenovo ThinkPad laptops
- Three tablets - Trekstor Primebook C11B 2-in-1, Irbis TW90 and Chuwi
Surbook Mini - got touchscreen support
* tag 'platform-drivers-x86-v5.4-1' of git://git.infradead.org/linux-platform-drivers-x86: (53 commits)
MAINTAINERS: Switch PDx86 subsystem status to Odd Fixes
platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API
platform/x86: asus-wmi: Rename CHARGE_THRESHOLD to RSOC
platform/x86: asus-wmi: Reorder ASUS_WMI_CHARGE_THRESHOLD
tools/power/x86/intel-speed-select: Display core count for bucket
platform/x86: ISST: Allow additional TRL MSRs
tools/power/x86/intel-speed-select: Fix memory leak
tools/power/x86/intel-speed-select: Output success/failed for command output
tools/power/x86/intel-speed-select: Output human readable CPU list
tools/power/x86/intel-speed-select: Change turbo ratio output to maximum turbo frequency
tools/power/x86/intel-speed-select: Switch output to MHz
tools/power/x86/intel-speed-select: Simplify output for turbo-freq and base-freq
tools/power/x86/intel-speed-select: Fix cpu-count output
tools/power/x86/intel-speed-select: Fix help option typo
tools/power/x86/intel-speed-select: Fix package typo
tools/power/x86/intel-speed-select: Fix a read overflow in isst_set_tdp_level_msr()
platform/x86: intel_int0002_vgpio: Use device_init_wakeup
platform/x86: intel_int0002_vgpio: Fix wakeups not working on Cherry Trail
platform/x86: compal-laptop: Initialize "value" in ec_read_u8()
platform/x86: touchscreen_dmi: Add info for the Trekstor Primebook C11B 2-in-1
...
Linus Torvalds [Tue, 17 Sep 2019 02:40:24 +0000 (19:40 -0700)]
Merge branch 'x86-vmware-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 vmware updates from Ingo Molnar:
"This updates the VMWARE guest driver with support for VMCALL/VMMCALL
based hypercalls"
* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
input/vmmouse: Update the backdoor call with support for new instructions
drm/vmwgfx: Update the backdoor call with support for new instructions
x86/vmware: Add a header file for hypercall definitions
x86/vmware: Update platform detection code for VMCALL/VMMCALL hypercalls
Linus Torvalds [Tue, 17 Sep 2019 02:39:00 +0000 (19:39 -0700)]
Merge branch 'x86-hyperv-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 hyperv updates from Ingo Molnar:
"Misc updates related to page size abstractions within the HyperV code,
in preparation for future features"
* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
drivers: hv: vmbus: Replace page definition with Hyper-V specific one
x86/hyperv: Add functions to allocate/deallocate page for Hyper-V
x86/hyperv: Create and use Hyper-V page definitions
Linus Torvalds [Tue, 17 Sep 2019 02:37:44 +0000 (19:37 -0700)]
Merge branch 'x86-platform-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 platform update from Ingo Molnar:
"The biggest change is the rework of the intel/iosf_mbi locking code
which used a few non-standard locking patterns, to make it work under
lockdep"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Fix kmalloc() NULL check routine
x86/platform/intel/iosf_mbi Rewrite locking
Linus Torvalds [Tue, 17 Sep 2019 02:21:34 +0000 (19:21 -0700)]
Merge branch 'x86-mm-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
- Make cpumask_of_node() more robust against invalid node IDs
- Simplify and speed up load_mm_cr4()
- Unexport and remove various unused set_memory_*() APIs
- Misc cleanups
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix cpumask_of_node() error condition
x86/mm: Remove the unused set_memory_wt() function
x86/mm: Remove set_pages_x() and set_pages_nx()
x86/mm: Remove the unused set_memory_array_*() functions
x86/mm: Unexport set_memory_x() and set_memory_nx()
x86/fixmap: Cleanup outdated comments
x86/kconfig: Remove X86_DIRECT_GBPAGES dependency on !DEBUG_PAGEALLOC
x86/mm: Avoid redundant interrupt disable in load_mm_cr4()
Linus Torvalds [Tue, 17 Sep 2019 02:06:29 +0000 (19:06 -0700)]
Merge branch 'x86-entry-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 entry updates from Ingo Molnar:
"This contains x32 and compat syscall improvements, the biggest one of
which splits x32 syscalls into their own table, which allows new
syscalls to share the x32 and x86-64 number - which turns the
512-547 special syscall numbers range into a legacy wart that won't be
extended going forward"
* 'x86-entry-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/syscalls: Split the x32 syscalls into their own table
x86/syscalls: Disallow compat entries for all types of 64-bit syscalls
x86/syscalls: Use the compat versions of rt_sigsuspend() and rt_sigprocmask()
x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long
Linus Torvalds [Tue, 17 Sep 2019 01:47:53 +0000 (18:47 -0700)]
Merge branch 'x86-cpu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 cpu-feature updates from Ingo Molnar:
- Rework the Intel model names symbols/macros, which were decades of
ad-hoc extensions and added random noise. It's now a coherent, easy
to follow nomenclature.
- Add new Intel CPU model IDs:
- "Tiger Lake" desktop and mobile models
- "Elkhart Lake" model ID
- and the "Lightning Mountain" variant of Airmont, plus support code
- Add the new AVX512_VP2INTERSECT instruction to cpufeatures
- Remove Intel MPX user-visible APIs and the self-tests, because the
toolchain (gcc) is not supporting it going forward. This is the
first, lowest-risk phase of MPX removal.
- Remove X86_FEATURE_MFENCE_RDTSC
- Various smaller cleanups and fixes
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/cpu: Update init data for new Airmont CPU model
x86/cpu: Add new Airmont variant to Intel family
x86/cpu: Add Elkhart Lake to Intel family
x86/cpu: Add Tiger Lake to Intel family
x86: Correct misc typos
x86/intel: Add common OPTDIFFs
x86/intel: Aggregate microserver naming
x86/intel: Aggregate big core graphics naming
x86/intel: Aggregate big core mobile naming
x86/intel: Aggregate big core client naming
x86/cpufeature: Explain the macro duplication
x86/ftrace: Remove mcount() declaration
x86/PCI: Remove superfluous returns from void functions
x86/msr-index: Move AMD MSRs where they belong
x86/cpu: Use constant definitions for CPU models
lib: Remove redundant ftrace flag removal
x86/crash: Remove unnecessary comparison
x86/bitops: Use __builtin_constant_p() directly instead of IS_IMMEDIATE()
x86: Remove X86_FEATURE_MFENCE_RDTSC
x86/mpx: Remove MPX APIs
...
Linus Torvalds [Tue, 17 Sep 2019 01:29:19 +0000 (18:29 -0700)]
Merge branch 'x86-build-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 build cleanup from Ingo Molnar:
"A single change that removes unnecessary asm-generic wrappers"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Remove unneeded uapi asm-generic wrappers
Linus Torvalds [Tue, 17 Sep 2019 01:27:37 +0000 (18:27 -0700)]
Merge branch 'x86-boot-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 boot code cleanup from Ingo Molnar:
"Clean up the BUILD_BUG_ON() definition which can cause build warnings"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Use common BUILD_BUG_ON
Linus Torvalds [Tue, 17 Sep 2019 01:07:08 +0000 (18:07 -0700)]
Merge branch 'x86-asm-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
- Add UMIP emulation/spoofing for 64-bit processes as well, because of
Wine based gaming.
- Clean up symbols/labels in low level asm code
- Add an assembly optimized mul_u64_u32_div() implementation on x86-64.
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/umip: Add emulation (spoofing) for UMIP covered instructions in 64-bit processes as well
x86/asm: Make some functions local labels
x86/asm/suspend: Get rid of bogus_64_magic
x86/math64: Provide a sane mul_u64_u32_div() implementation for x86_64
Linus Torvalds [Tue, 17 Sep 2019 00:25:49 +0000 (17:25 -0700)]
Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and
Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann,
Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers.
As perf and the scheduler is getting bigger and more complex,
document the status quo of current responsibilities and interests,
and spread the review pain^H^H^H^H fun via an increase in the Cc:
linecount generated by scripts/get_maintainer.pl. :-)
- Add another series of patches that brings the -rt (PREEMPT_RT) tree
closer to mainline: split the monolithic CONFIG_PREEMPT dependencies
into a new CONFIG_PREEMPTION category that will allow the eventual
introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches
to go though.
- Extend the CPU cgroup controller with uclamp.min and uclamp.max to
allow the finer shaping of CPU bandwidth usage.
- Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS).
- Improve the behavior of high CPU count, high thread count
applications running under cpu.cfs_quota_us constraints.
- Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present.
- Improve CPU isolation housekeeping CPU allocation NUMA locality.
- Fix deadline scheduler bandwidth calculations and logic when cpusets
rebuilds the topology, or when it gets deadline-throttled while it's
being offlined.
- Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from
setscheduler() system calls without creating global serialization.
Add new synchronization between cpuset topology-changing events and
the deadline acceptance tests in setscheduler(), which were broken
before.
- Rework the active_mm state machine to be less confusing and more
optimal.
- Rework (simplify) the pick_next_task() slowpath.
- Improve load-balancing on AMD EPYC systems.
- ... and misc cleanups, smaller fixes and improvements - please see
the Git log for more details.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
sched/psi: Correct overly pessimistic size calculation
sched/fair: Speed-up energy-aware wake-ups
sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
sched/uclamp: Update CPU's refcount on TG's clamp changes
sched/uclamp: Use TG's clamps to restrict TASK's clamps
sched/uclamp: Propagate system defaults to the root group
sched/uclamp: Propagate parent clamps
sched/uclamp: Extend CPU's cgroup controller
sched/topology: Improve load balancing on AMD EPYC systems
arch, ia64: Make NUMA select SMP
sched, perf: MAINTAINERS update, add submaintainers and reviewers
sched/fair: Use rq_lock/unlock in online_fair_sched_group
cpufreq: schedutil: fix equation in comment
sched: Rework pick_next_task() slow-path
sched: Allow put_prev_task() to drop rq->lock
sched/fair: Expose newidle_balance()
sched: Add task_struct pointer to sched_class::set_curr_task
sched: Rework CPU hotplug task selection
sched/{rt,deadline}: Fix set_next_task vs pick_next_task
sched: Fix kerneldoc comment for ia64_set_curr_task
...
Linus Torvalds [Tue, 17 Sep 2019 00:06:21 +0000 (17:06 -0700)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Improved kbprobes robustness
- Intel PEBS support for PT hardware tracing
- Other Intel PT improvements: high order pages memory footprint
reduction and various related cleanups
- Misc cleanups
The perf tooling side has been very busy in this cycle, with over 300
commits. This is an incomplete high-level summary of the many
improvements done by over 30 developers:
- Lots of updates to the following tools:
'perf c2c'
'perf config'
'perf record'
'perf report'
'perf script'
'perf test'
'perf top'
'perf trace'
- Updates to libperf and libtraceevent, and a consolidation of the
proliferation of x86 instruction decoder libraries.
- Vendor event updates for Intel and PowerPC CPUs,
- Updates to hardware tracing tooling for ARM and Intel CPUs,
- ... and lots of other changes and cleanups - see the shortlog and
Git log for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (322 commits)
kprobes: Prohibit probing on BUG() and WARN() address
perf/x86: Make more stuff static
x86, perf: Fix the dependency of the x86 insn decoder selftest
objtool: Ignore intentional differences for the x86 insn decoder
objtool: Update sync-check.sh from perf's check-headers.sh
perf build: Ignore intentional differences for the x86 insn decoder
perf intel-pt: Use shared x86 insn decoder
perf intel-pt: Remove inat.c from build dependency list
perf: Update .gitignore file
objtool: Move x86 insn decoder to a common location
perf metricgroup: Support multiple events for metricgroup
perf metricgroup: Scale the metric result
perf pmu: Change convert_scale from static to global
perf symbols: Move mem_info and branch_info out of symbol.h
perf auxtrace: Uninline functions that touch perf_session
perf tools: Remove needless evlist.h include directives
perf tools: Remove needless evlist.h include directives
perf tools: Remove needless thread_map.h include directives
perf tools: Remove needless thread.h include directives
perf tools: Remove needless map.h include directives
...
Linus Torvalds [Mon, 16 Sep 2019 23:49:55 +0000 (16:49 -0700)]
Merge branch 'locking-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- improve rwsem scalability
- add uninitialized rwsem debugging check
- reduce lockdep's stacktrace memory usage and add diagnostics
- misc cleanups, code consolidation and constification
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mutex: Fix up mutex_waiter usage
locking/mutex: Use mutex flags macro instead of hard code
locking/mutex: Make __mutex_owner static to mutex.c
locking/qspinlock,x86: Clarify virt_spin_lock_key
locking/rwsem: Check for operations on an uninitialized rwsem
locking/rwsem: Make handoff writer optimistically spin on owner
locking/lockdep: Report more stack trace statistics
locking/lockdep: Reduce space occupied by stack traces
stacktrace: Constify 'entries' arguments
locking/lockdep: Make it clear that what lock_class::key points at is not modified
Linus Torvalds [Mon, 16 Sep 2019 23:47:38 +0000 (16:47 -0700)]
Merge branch 'efi-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
- refactor the EFI config table handling across architectures
- add support for the Dell EMC OEM config table
- include AER diagnostic output to CPER handling of fatal PCIe errors
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: cper: print AER info of PCIe fatal error
efi: Export Runtime Configuration Interface table to sysfs
efi: ia64: move SAL systab handling out of generic EFI code
efi/x86: move UV_SYSTAB handling into arch/x86
efi: x86: move efi_is_table_address() into arch/x86
Linus Torvalds [Mon, 16 Sep 2019 23:44:55 +0000 (16:44 -0700)]
Merge branch 'core-stacktrace-for-linus' of git://git./linux/kernel/git/tip/tip
Pull stacktrace fixlet from Ingo Molnar:
"Two comment fixes"
* 'core-stacktrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/stackdepot: Fix outdated comments
Linus Torvalds [Mon, 16 Sep 2019 23:28:19 +0000 (16:28 -0700)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"This cycle's RCU changes were:
- A few more RCU flavor consolidation cleanups.
- Updates to RCU's list-traversal macros improving lockdep usability.
- Forward-progress improvements for no-CBs CPUs: Avoid ignoring
incoming callbacks during grace-period waits.
- Forward-progress improvements for no-CBs CPUs: Use ->cblist
structure to take advantage of others' grace periods.
- Also added a small commit that avoids needlessly inflicting
scheduler-clock ticks on callback-offloaded CPUs.
- Forward-progress improvements for no-CBs CPUs: Reduce contention on
->nocb_lock guarding ->cblist.
- Forward-progress improvements for no-CBs CPUs: Add ->nocb_bypass
list to further reduce contention on ->nocb_lock guarding ->cblist.
- Miscellaneous fixes.
- Torture-test updates.
- minor LKMM updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits)
MAINTAINERS: Update from paulmck@linux.ibm.com to paulmck@kernel.org
rcu: Don't include <linux/ktime.h> in rcutiny.h
rcu: Allow rcu_do_batch() to dynamically adjust batch sizes
rcu/nocb: Don't wake no-CBs GP kthread if timer posted under overload
rcu/nocb: Reduce __call_rcu_nocb_wake() leaf rcu_node ->lock contention
rcu/nocb: Reduce nocb_cb_wait() leaf rcu_node ->lock contention
rcu/nocb: Advance CBs after merge in rcutree_migrate_callbacks()
rcu/nocb: Avoid synchronous wakeup in __call_rcu_nocb_wake()
rcu/nocb: Print no-CBs diagnostics when rcutorture writer unduly delayed
rcu/nocb: EXP Check use and usefulness of ->nocb_lock_contended
rcu/nocb: Add bypass callback queueing
rcu/nocb: Atomic ->len field in rcu_segcblist structure
rcu/nocb: Unconditionally advance and wake for excessive CBs
rcu/nocb: Reduce ->nocb_lock contention with separate ->nocb_gp_lock
rcu/nocb: Reduce contention at no-CBs invocation-done time
rcu/nocb: Reduce contention at no-CBs registry-time CB advancement
rcu/nocb: Round down for number of no-CBs grace-period kthreads
rcu/nocb: Avoid ->nocb_lock capture by corresponding CPU
rcu/nocb: Avoid needless wakeups of no-CBs grace-period kthread
rcu/nocb: Make __call_rcu_nocb_wake() safe for many callbacks
...
Linus Torvalds [Mon, 16 Sep 2019 23:15:34 +0000 (16:15 -0700)]
Merge branch 'core-objtool-for-linus' of git://git./linux/kernel/git/tip/tip
Pull objtool build fix from Ingo Molnar:
"Fix objtool builds with more exotic, user-defined CFLAGS"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Clobber user CFLAGS variable
Linus Torvalds [Mon, 16 Sep 2019 23:11:41 +0000 (16:11 -0700)]
Merge branch 'core-headers-for-linus' of git://git./linux/kernel/git/tip/tip
Pull header documentation fix from Ingo Molnar:
"Fix the parameter description <asm-generic/div64.h>"
* 'core-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
asm-generic/div64: Fix documentation of do_div() parameter
Linus Torvalds [Mon, 16 Sep 2019 22:56:22 +0000 (15:56 -0700)]
Merge tag 'armsoc-dt' of git://git./linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"This is another huge branch with close to 450 changessets related to
devicetree files, roughly half of this for 32-bit and 64-bit
respectively. There are lots of cleanups and additional hardware
support for platforms we already support based on SoCs from Renesas,
ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
other manufacturers.
A total of 6 new SoCs and 37 new boards gets added this time, one more
SoC will come in a follow-up branch. Most of the new boards are for
64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.
Going more into details for SoC platforms with new hardware support:
- The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
platform, usually paired with an external 5G modem. So far we only
support the Qualcomm SM8150 MTP reference platform, but no actual
products.
- For the slightly older Qualcomm platforms, support for several
interesting products is getting added: Three laptops based on
Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
and several phones based on the older Snapdragon 410/MSM8916
(Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
aka Wileyfox Swift).
- Mediatek MT7629 is a new wireless network router chip, similar to
the older MT7623. It gets added together with the reference board
implementation.
- Allwinner V3 is a repackaged version of the existing low-end V3s
chip, and is used in the tiny Lichee Pi Zero plus, also added here.
There is also a new TV set-top box based on Allwinner H6, the Tanix
TX6, and the eMMC variant of the Olimex A64-Olinuxino development
board.
- NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
family, similar to the i.MX8M Mini. As usual, there is a large
number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
SolidRun Hummingboard Pulse baseboard and System-on-Module,
Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
Innovations i.MX7 RMU2 board.
- In a different NXP product line, the Layerscape LS1046A "Freeway"
reference board gets added.
- Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
their set-top-box line and smart speaker with newer CPU and GPU
cores compared to their predecessors. Both are now also supported
by the Khadas VIM3 development board series, and the dts files for
that get reorganized a bit to better deal with all variants.
Another board based on SM1 that gets added is the SEI Robotics
SEI610.
- There are a handful of new x86 and Power9 server boards using
Aspeed BMC chips that are gaining support for running Linux on the
BMC through the OpenBMC project: Facebook
Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
these are still new machines using SoCs based on the ARM9 and ARM11
CPU cores, as support for the new Cortex-A7 based AST2600 is still
ramping up.
- There are three new end-user products using 32-bit Rockchips SoCs:
Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
low-end RK3229 chip, while the two AOpen products Chromebox Mini
(Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
commercial settings(digital signage, PoS, ...).
- One more single-board computer based on the popular 64-bit RK3399
is added: the Leez RK3399 P710"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
arm64: dts: qcom: Add Lenovo Yoga C630
ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
ARM; dts: aspeed: mihawk: File should not be executable
ARM: dts: aspeed: swift: Change power supplies to version 2
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed-g4: Add all flash chips
ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
ARM: dts: exynos: Remove not accurate secondary ADC compatible
arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
arm64: dts: meson-sm1-sei610: add stdout-path property back
arm64: dts: meson-sm1-sei610: enable DVFS
arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
arm64: dts: meson: g12a: add reset to tdm formatters
...
Linus Torvalds [Mon, 16 Sep 2019 22:55:06 +0000 (15:55 -0700)]
Merge tag 'armsoc-defconfig' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs after the code was merged through another tree"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
arm64: defconfig: Enable Qualcomm QUSB2 PHY
arm64: defconfig: Enable the EFI Framebuffer
arm64: defconfig: Enable Qualcomm GENI based I2C controller
ARM: multi_v7_defconfig: Make MAX77802 regulator driver built-in
arm64: defconfig: Enable CPU clock drivers for Qualcomm msm8916
arm64: defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
ARM: multi_v7_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
ARM: qcom_defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM
ARM: configs: aspeed_g5: Enable AST2600
ARM: configs: multi_v7: Add ASPEED G6
arm64: defconfig: Enable SM8150 GCC and pinctrl driver
arm64: defconfig: Enable CONFIG_ACPI_APEI_PCIEAER
arm64: defconfig: Enable the DesignWare watchdog
ARM: multi_v7_defconfig: Enable SPI_STM32_QSPI support
ARM: imx_v6_v7_defconfig: Enable the PSCI CPUidle driver
arm64: defconfig: Enable the PSCI CPUidle driver
arm64: defconfig: Enable Sun4i SPDIF module
ARM: exynos_defconfig: Enable AHCI-platform SATA driver
arm64: defconfig: CONFIG_DRM_ETNAVIV=m
ARM: imx_v6_v7_defconfig: Select the OV5645 camera driver
...
Linus Torvalds [Mon, 16 Sep 2019 22:52:38 +0000 (15:52 -0700)]
Merge tag 'armsoc-drivers' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This contains driver changes that are tightly connected to SoC
specific code. Aside from smaller cleanups and bug fixes, here is a
list of the notable changes.
New device drivers:
- The Turris Mox router has a new "moxtet" bus driver for its
on-board pluggable extension bus. The same platform also gains a
firmware driver.
- The Samsung Exynos family gains a new Chipid driver exporting using
the soc device sysfs interface
- A similar socinfo driver for Qualcomm Snapdragon chips.
- A firmware driver for the NXP i.MX DSP IPC protocol using shared
memory and a mailbox
Other changes:
- The i.MX reset controller driver now supports the NXP i.MX8MM chip
- Amlogic SoC specific drivers gain support for the S905X3 and A311D
chips
- A rework of the TI Davinci framebuffer driver to allow important
cleanups in the platform code
- A couple of device drivers for removed ARM SoC platforms are
removed. Most of the removals were picked up by other maintainers,
this contains whatever was left"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
bus: uniphier-system-bus: use devm_platform_ioremap_resource()
soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
firmware: ti_sci: Allow for device shared and exclusive requests
bus: imx-weim: remove incorrect __init annotations
fbdev: remove w90x900/nuc900 platform drivers
spi: remove w90x900 driver
net: remove w90p910-ether driver
net: remove ks8695 driver
firmware: turris-mox-rwtm: Add sysfs documentation
firmware: Add Turris Mox rWTM firmware driver
dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
bus: moxtet: fix unsigned comparison to less than zero
bus: moxtet: remove set but not used variable 'dummy'
ARM: scoop: Use the right include
dt-bindings: power: add Amlogic Everything-Else power domains bindings
soc: amlogic: Add support for Everything-Else power domains controller
fbdev: da8xx: use resource management for dma
fbdev: da8xx-fb: drop a redundant if
fbdev: da8xx-fb: use devm_platform_ioremap_resource()
...
Linus Torvalds [Mon, 16 Sep 2019 22:48:14 +0000 (15:48 -0700)]
Merge tag 'armsoc-soc' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Arnd Bergmann:
"The main change this time around is a cleanup of some of the oldest
platforms based on the XScale and ARM9 CPU cores, which are between 10
and 20 years old.
The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel
IOP33x/IOP13xx platforms are removed after we determined that nobody
is using them any more.
The TI Davinci and NXP LPC32xx platforms on the other hand are still
in active use and are converted to the ARCH_MULTIPLATFORM build,
meaning that we can compile a kernel that works on these along with
most other ARMv5 platforms. Changes toward that goal are also merged
for IOP32x, but additional work is needed to complete this. Patches
for the remaining ARMv5 platforms have started but need more work and
some testing.
Support for the new ASpeed AST2600 gets added, this is based on the
Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and
ARMv6 chips in the same family.
Other changes include a cleanup of the ST-Ericsson ux500 platform and
the move of the TI Davinci platform to a new clocksource driver"
[ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being
buildable on other platforms through COMPILE_TEST, but that causes new
warnings that I most definitely do not want to see during the merge
window as that could hide other issues.
So the COMPILE_TEST option got disabled for them again - Linus ]
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build
ARM: davinci: support multiplatform build for ARM v5
arm64: exynos: Enable exynos-chipid driver
ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
ARM: davinci: dm646x: Fix a typo in the comment
ARM: davinci: dm646x: switch to using the clocksource driver
ARM: davinci: dm644x: switch to using the clocksource driver
ARM: aspeed: Enable SMP boot
ARM: aspeed: Add ASPEED AST2600 architecture
ARM: aspeed: Select timer in each SoC
dt-bindings: arm: cpus: Add ASPEED SMP
ARM: imx: stop adjusting ar8031 phy tx delay
mailmap: map old company name to new one @microchip.com
MAINTAINERS: at91: remove the TC entry
MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry
ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91
MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers
ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c
ARM: debug-ll: Add support for r7s9210
...
Linus Torvalds [Mon, 16 Sep 2019 22:38:31 +0000 (15:38 -0700)]
Merge branch 'parisc-5.4-1' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Make the powerpc implementation to read elf files available as a
public kexec interface so it can be re-used on other architectures
(Sven)
- Implement kexec on parisc (Sven)
- Add kprobes on ftrace on parisc (Sven)
- Fix kernel crash with HSC-PCI cards based on card-mode Dino
- Add assembly implementations for memset, strlen, strcpy, strncpy and
strcat
- Some cleanups, documentation updates, warning fixes, ...
* 'parisc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (25 commits)
parisc: Have git ignore generated real2.S and firmware.c
parisc: Disable HP HSC-PCI Cards to prevent kernel crash
parisc: add support for kexec_file_load() syscall
parisc: wire up kexec_file_load syscall
parisc: add kexec syscall support
parisc: add __pdc_cpu_rendezvous()
kprobes/parisc: remove arch_kprobe_on_func_entry()
kexec_elf: support 32 bit ELF files
kexec_elf: remove unused variable in kexec_elf_load()
kexec_elf: remove Elf_Rel macro
kexec_elf: remove PURGATORY_STACK_SIZE
kexec_elf: remove parsing of section headers
kexec_elf: change order of elf_*_to_cpu() functions
kexec: add KEXEC_ELF
parisc: Save some bytes in dino driver
parisc: Drop comments which are already in pci.h
parisc: Convert eisa_enumerator to use pr_cont()
parisc: Avoid warning when loading hppb driver
parisc: speed up flush_tlb_all_local with qemu
parisc: Add ALTERNATIVE_CODE() and ALT_COND_RUN_ON_QEMU
...
Linus Torvalds [Mon, 16 Sep 2019 22:32:01 +0000 (15:32 -0700)]
Merge tag 'please-pull-ia64_for_5.4' of git://git./linux/kernel/git/aegl/linux
Pull ia64 updates from Tony Luck:
"The big change here is removal of support for SGI Altix"
* tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits)
genirq: remove the is_affinity_mask_valid hook
ia64: remove CONFIG_SWIOTLB ifdefs
ia64: remove support for machvecs
ia64: move the screen_info setup to common code
ia64: move the ROOT_DEV setup to common code
ia64: rework iommu probing
ia64: remove the unused sn_coherency_id symbol
ia64: remove the SGI UV simulator support
ia64: remove the zx1 swiotlb machvec
ia64: remove CONFIG_ACPI ifdefs
ia64: remove CONFIG_PCI ifdefs
ia64: remove the hpsim platform
ia64: remove now unused machvec indirections
ia64: remove support for the SGI SN2 platform
drivers: remove the SGI SN2 IOC4 base support
drivers: remove the SGI SN2 IOC3 base support
qla2xxx: remove SGI SN2 support
qla1280: remove SGI SN2 support
misc/sgi-xp: remove SGI SN2 support
char/mspec: remove SGI SN2 support
...
Linus Torvalds [Mon, 16 Sep 2019 22:29:34 +0000 (15:29 -0700)]
Merge tag 'riscv/for-v5.4-rc1' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Add the following new features:
- Generic CPU topology description support for DT-based platforms,
including ARM64, ARM and RISC-V.
- Sparsemem support
- Perf callchain support
- SiFive PLIC irqchip modifications, in preparation for M-mode Linux
and clean up the code base:
- Clean up chip-specific register (CSR) manipulation code, IPIs, TLB
flushing, and the RISC-V CPU-local timer code
- Kbuild cleanup from one of the Kbuild maintainers"
[ The CPU topology parts came in through the arm64 tree with a shared
branch - Linus ]
* tag 'riscv/for-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
irqchip/sifive-plic: set max threshold for ignored handlers
riscv: move the TLB flush logic out of line
riscv: don't use the rdtime(h) pseudo-instructions
riscv: cleanup riscv_cpuid_to_hartid_mask
riscv: optimize send_ipi_single
riscv: cleanup send_ipi_mask
riscv: refactor the IPI code
riscv: Add support for libdw
riscv: Add support for perf registers sampling
riscv: Add perf callchain support
riscv: add arch/riscv/Kbuild
RISC-V: Implement sparsemem
riscv: Using CSR numbers to access CSRs
Linus Torvalds [Mon, 16 Sep 2019 22:28:12 +0000 (15:28 -0700)]
Merge tag 'm68k-for-v5.4-tag1' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- ioremap() cleanups
- defconfig updates
- small fixes and cleanups
* tag 'm68k-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Remove ioremap_fullcache()
m68k: Simplify ioremap_nocache()
m68k: defconfig: Update defconfigs for v5.3-rc2
m68k: atari: Rename shifter to shifter_st to avoid conflict
m68k: Prevent some compiler warnings in Coldfire builds
m68k: mac: Revisit floppy disc controller base addresses
Linus Torvalds [Mon, 16 Sep 2019 21:31:40 +0000 (14:31 -0700)]
Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Although there isn't tonnes of code in terms of line count, there are
a fair few headline features which I've noted both in the tag and also
in the merge commits when I pulled everything together.
The part I'm most pleased with is that we had 35 contributors this
time around, which feels like a big jump from the usual small group of
core arm64 arch developers. Hopefully they all enjoyed it so much that
they'll continue to contribute, but we'll see.
It's probably worth highlighting that we've pulled in a branch from
the risc-v folks which moves our CPU topology code out to where it can
be shared with others.
Summary:
- 52-bit virtual addressing in the kernel
- New ABI to allow tagged user pointers to be dereferenced by
syscalls
- Early RNG seeding by the bootloader
- Improve robustness of SMP boot
- Fix TLB invalidation in light of recent architectural
clarifications
- Support for i.MX8 DDR PMU
- Remove direct LSE instruction patching in favour of static keys
- Function error injection using kprobes
- Support for the PPTT "thread" flag introduced by ACPI 6.3
- Move PSCI idle code into proper cpuidle driver
- Relaxation of implicit I/O memory barriers
- Build with RELR relocations when toolchain supports them
- Numerous cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (114 commits)
arm64: remove __iounmap
arm64: atomics: Use K constraint when toolchain appears to support it
arm64: atomics: Undefine internal macros after use
arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL
arm64: asm: Kill 'asm/atomic_arch.h'
arm64: lse: Remove unused 'alt_lse' assembly macro
arm64: atomics: Remove atomic_ll_sc compilation unit
arm64: avoid using hard-coded registers for LSE atomics
arm64: atomics: avoid out-of-line ll/sc atomics
arm64: Use correct ll/sc atomic constraints
jump_label: Don't warn on __exit jump entries
docs/perf: Add documentation for the i.MX8 DDR PMU
perf/imx_ddr: Add support for AXI ID filtering
arm64: kpti: ensure patched kernel text is fetched from PoU
arm64: fix fixmap copy for 16K pages and 48-bit VA
perf/smmuv3: Validate groups for global filtering
perf/smmuv3: Validate group size
arm64: Relax Documentation/arm64/tagged-pointers.rst
arm64: kvm: Replace hardcoded '1' with SYS_PAR_EL1_F
arm64: mm: Ignore spurious translation faults taken from the kernel
...
Linus Torvalds [Mon, 16 Sep 2019 21:14:40 +0000 (14:14 -0700)]
Merge tag 'iommu-updates-v5.4' of git://git./linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- batched unmap support for the IOMMU-API
- support for unlocked command queueing in the ARM-SMMU driver
- rework the ATS support in the ARM-SMMU driver
- more refactoring in the ARM-SMMU driver to support hardware
implemention specific quirks and errata
- bounce buffering DMA-API implementatation in the Intel VT-d driver
for untrusted devices (like Thunderbolt devices)
- fixes for runtime PM support in the OMAP iommu driver
- MT8183 IOMMU support in the Mediatek IOMMU driver
- rework of the way the IOMMU core sets the default domain type for
groups. Changing the default domain type on x86 does not require two
kernel parameters anymore.
- more smaller fixes and cleanups
* tag 'iommu-updates-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (113 commits)
iommu/vt-d: Declare Broadwell igfx dmar support snafu
iommu/vt-d: Add Scalable Mode fault information
iommu/vt-d: Use bounce buffer for untrusted devices
iommu/vt-d: Add trace events for device dma map/unmap
iommu/vt-d: Don't switch off swiotlb if bounce page is used
iommu/vt-d: Check whether device requires bounce buffer
swiotlb: Split size parameter to map/unmap APIs
iommu/omap: Mark pm functions __maybe_unused
iommu/ipmmu-vmsa: Disable cache snoop transactions on R-Car Gen3
iommu/ipmmu-vmsa: Move IMTTBCR_SL0_TWOBIT_* to restore sort order
iommu: Don't use sme_active() in generic code
iommu/arm-smmu-v3: Fix build error without CONFIG_PCI_ATS
iommu/qcom: Use struct_size() helper
iommu: Remove wrong default domain comments
iommu/dma: Fix for dereferencing before null checking
iommu/mediatek: Clean up struct mtk_smi_iommu
memory: mtk-smi: Get rid of need_larbid
iommu/mediatek: Fix VLD_PA_RNG register backup when suspend
memory: mtk-smi: Add bus_sel for mt8183
memory: mtk-smi: Invoke pm runtime_callback to enable clocks
...
Linus Torvalds [Mon, 16 Sep 2019 21:06:50 +0000 (14:06 -0700)]
Merge tag 'gpio-v5.4-1' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of changes in the GPIO subsystem for the v5.4 kernel
cycle.
Core changes:
- Support hierarchical GPIO irqchips.
We now have three consumers that can use this: Intel IXP4xx,
ThunderX and Qualcomm SPMI GPIO (in the pinctrl subsystem).
The support code has been long in the making and hashed out so it
should be easily adaptable for all hierarchical irqchip parents.
The code only gets compiled in if hierarchical irqchip is used at
the topmost irq controller at least, as the hierarchical irqchip
requires strict hierarchy all the way up in the system.
- Determine the need for a "valid_mask" for GPIO lines on the
gpio_chip and conversely for the "valid_mask" for the GPIO
interrupt chip interrupt lines by looking for a .init_valid_mask()
callback in the main chip or GPIO interrupt chip respectively.
Allocate it with bitmap_alloc().
- Isolate the device tree/open firmware GPIO description code out in
its own file properly.
- Isolate the ACPI GPIO description code out in its own file
properly.
- Drop a whole lot of #ifdef:s in the main includes: it does not hurt
to keep the include items around, and we get quicker and clearer
compile failures if the appropriate kernel symbols are not selected
for drivers.
New/deleted drivers:
- New driver for Aspeed SGPIO.
- The KS8695 driver is deleted as the platform gets deleted from
arch/arm in this kernel cycle.
- The Cirrus Logic Madera driver now supports CS47L92 and CS47L15.
- The Freescale MPC8xxx now supports LS1028A and LS1088A.
Driver improvements:
- We pass the GPIO irqchip intialization by directly filling in the
struct instead of using set-up functions (the new way) for Intel
MID, Lynxpoint, Merrifield, XLP, HLWD, Aspeed, ZX, VF610, TQMX86,
MT7621, Zynq and EP93xx.
Out-of-band changes:
- Fix a GPIO header inclusion in Unicore - no response from
maintainer.
- Drop FMC subsystem from MAINTAINERS - was deleted in the GPIO tree
last cycle so let's mop up the shards"
* tag 'gpio-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (82 commits)
gpiolib: of: add a fallback for wlf,reset GPIO name
gpio: htc-egpio: Remove unused exported htc_egpio_get_wakeup_irq()
gpio: remove explicit comparison with 0
gpio: creg-snps: use devm_platform_ioremap_resource() to simplify code
gpio: devres: Switch to EXPORT_SYMBOL_GPL()
gpio: of: Switch to EXPORT_SYMBOL_GPL()
gpio: of: Make of_gpio_simple_xlate() private
gpio: of: Make of_get_named_gpiod_flags() private
gpio: aspeed: Add in ast2600 details to Aspeed driver
gpio: aspeed: Use ngpio property from device tree if available
gpio: aspeed: Setup irqchip dynamically
gpio/aspeed: Fix incorrect number of banks
gpio: aspeed: Update documentation with ast2600 controllers
gpio: Initialize the irqchip valid_mask with a callback
gpiolib: acpi: make acpi_can_fallback_to_crs() static
gpio: Fix further merge errors
gpio: Fix up merge collision in include file
gpio: of: Normalize return code variable name
gpio: gpiolib: Normalize return code variable name
gpio: ep93xx: Pass irqchip when adding gpiochip
...
Linus Torvalds [Mon, 16 Sep 2019 21:04:46 +0000 (14:04 -0700)]
Merge tag 'i3c/for-5.4' of git://git./linux/kernel/git/i3c/linux
Pull i3c updates from Boris Brezillon:
"Core changes:
- Export i3c_device_match_id() so driver can get per-device data
- Add addr and lvr fields to i2c_dev_desc so we can attach I2C
devices that are not described in the DT
- Add a missing of_node_put()
- Fix a memory leak
- Use dev_to_i3cmaster() instead of open-coding it
Driver changes:
- Use for_each_set_bit() in the Cadence driver"
* tag 'i3c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Use dev_to_i3cmaster()
i3c: master: fix a memory leak bug
i3c: add addr and lvr to i2c_dev_desc structure
i3c: master: cdns: Use for_each_set_bit()
i3c: master: Add of_node_put() before return
i3c: move i3c_device_match_id to device.c and export it
Linus Torvalds [Mon, 16 Sep 2019 21:02:43 +0000 (14:02 -0700)]
Merge tag 'spi-v5.4' of git://git./linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The big theme for this release has been performance, we've had a
series of unrelated overhauls of a few drivers all with a big
peformance component.
Otherwise it's been relatively quiet, highlights include:
- A big overhaul of the spi-fsl-dspi driver improving the code
quality, performance and stability from Vladimir Oltean.
- A big performance enhancement for the bc2835 (Raspberry Pi) driver
for unidirectional transfers from Lukas Wunner.
- Improved performance on small transfers for the uniphier driver
from Keiji Hayashibara.
- Lots of coccinelle generated cleanups from Yue Haibing.
- New device support for Freescale ls2080a and Nuvoton NPCM FIU"
* tag 'spi-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (102 commits)
spi: mediatek: support large PA
spi: mediatek: add spi support for mt6765 IC
dt-bindings: spi: update bindings for MT6765 SoC
spi: bcm2835: Speed up RX-only DMA transfers by zero-filling TX FIFO
spi: bcm2835: Speed up TX-only DMA transfers by clearing RX FIFO
dmaengine: bcm2835: Avoid accessing memory when copying zeroes
spi: bcm2835: Cache CS register value for ->prepare_message()
dmaengine: bcm2835: Document struct bcm2835_dmadev
spi: Guarantee cacheline alignment of driver-private data
dmaengine: bcm2835: Allow reusable descriptors
dmaengine: bcm2835: Allow cyclic transactions without interrupt
spi: bcm2835: Drop dma_pending flag
spi: bcm2835: Work around DONE bit erratum
spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()
spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages
spi: npcm-fiu: remove set but not used variable 'retlen'
spi: fsl-spi: use devm_platform_ioremap_resource() to simplify code
spi: zynq-qspi: use devm_platform_ioremap_resource() to simplify code
spi: zynqmp: use devm_platform_ioremap_resource() to simplify code
spi: xlp: use devm_platform_ioremap_resource() to simplify code
...
Linus Torvalds [Mon, 16 Sep 2019 20:58:43 +0000 (13:58 -0700)]
Merge tag 'regulator-v5.4' of git://git./linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"A small update for the regualtor API for this cycle, some small fixes
and a bunch of new devices but none of them very big.
The most stand out thing is the regulator-fixed-clock driver which is
for regulators where the enable control is done by using a clock
instead of a GPIO or register write, a novel hardware design that had
not previously come up.
Summary:
- Added a keyword pattern for regulator_get_optional() since usage of
that API generally needs extra review.
- Operating mode and suspend state support for act8865.
- New device support for Active Semiconductor ACT8600 chargers,
Mediatek MT6358, Qualcomm SM8150, regulator-fixed-clock, and
Synoptics SY20276, SY20278 and SY8824E"
* tag 'regulator-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
regulator: core: Fix error return for /sys access
regulator: da9211: fix obtaining "enable" GPIO
regulator: max77686: fix obtaining "maxim,ena" GPIO
regulator: uniphier: Add Pro5 USB3 VBUS support
dt-bindings: regulator: add regulator-fixed-clock binding
regulator: fixed: add possibility to enable by clock
regulator: s2mps11: Consistently use local variable
regulator: lp87565: Simplify lp87565_buck_set_ramp_delay
regulator: slg51000: use devm_gpiod_get_optional() in probe
regulator: lp8788-ldo: make array en_mask static const, makes object smaller
regulator: tps65132: Stop parsing DT when gpio is not found
regulator: Defer init completion for a while after late_initcall
regulator: add missing 'static inline' to a helper's stub
regulator: provide regulator_bulk_set_supply_names()
MAINTAINERS: Add keyword pattern on regulator_get_optional()
regulator: sy8824x: add prefixes to BUCK_EN and MODE macros
regulator: sy8824x: use c++style for the comment block near SPDX
regulator: mt6358: Add BROKEN dependency while waiting for MFD to merge
regulator: mt6358: Add support for MT6358 regulator
regulator: Add document for MT6358 regulator
...
Linus Torvalds [Mon, 16 Sep 2019 20:57:02 +0000 (13:57 -0700)]
Merge tag 'regmap-v5.4' of git://git./linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Only two changes for this release, one fix for error handling with
runtime PM and a change from Greg removing error handling from debugfs
API calls now that they implement user visible error reporting"
* tag 'regmap-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Correct error paths in regmap_irq_thread for pm_runtime
regmap: no need to check return value of debugfs_create functions
Linus Torvalds [Mon, 16 Sep 2019 20:44:16 +0000 (13:44 -0700)]
Merge tag 'hwmon-for-v5.4' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Inspur Power System power supply driver
- Synaptics AS370 PVT sensor driver
Chip support:
- support SHTC3 in shtc1 driver
- support NCT6116 in nct6775 driver
- support AMD family 17h, model 70h CPUs in k10temp driver
- support PCT2075 in lm75 driver
Removed drivers:
- ads1015 driver (now supported in iio)
Other changes:
- Convert drivers to use devm_i2c_new_dummy_device
- Substantial structural improvements in lm75 driver adding support
for writing sample interval for supported chips
- Add support for PSU version 2 to ibm-cffps driver
- Add support for power attribute to iio_hwmon bridge
- Add support for additional fan, voltage and temperature attributes
to nct7904 driver
- Convert adt7475 driver to use hwmon_device_register_with_groups()
- Convert k8temp driver to use hwmon_device_register_with_info()
- Various other improvements and minor fixes"
* tag 'hwmon-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits)
hwmon: submitting-patches: Add note on comment style
hwmon: submitting-patches: Point to with_info API
hwmon: (nct7904) Fix incorrect SMI status register setting of LTD temperature and fan.
hwmon: (shtc1) add support for the SHTC3 sensor
hwmon: (shtc1) fix shtc1 and shtw1 id mask
hwmon: (lm75) Aproximate sample times to data-sheet values
hwmon: (w83793d) convert to use devm_i2c_new_dummy_device
hwmon: (w83792d) convert to use devm_i2c_new_dummy_device
hwmon: (w83791d) convert to use devm_i2c_new_dummy_device
hwmon: (as370-hwmon) fix devm_platform_ioremap_resource.cocci warnings
hwmon: (lm75) Add support for writing sampling period on PCT2075
hwmon: (lm75) Add support for writing conversion time for TMP112
hwmon: (lm75) Move updating the sample interval to its own function
hwmon: (lm75) Support configuring the sample time for various chips
hwmon: (nct7904) Fix incorrect temperature limitation register setting of LTD.
hwmon: (as370-hwmon) Add DT bindings for Synaptics AS370 PVT
hwmon: Add Synaptics AS370 PVT sensor driver
pmbus: (ibm-cffps) Add support for version 2 of the PSU
dt-bindings: hwmon: Document ibm,cffps2 compatible string
hwmon: (iio_hwmon) Enable power exporting from IIO
...
Linus Torvalds [Mon, 16 Sep 2019 20:42:25 +0000 (13:42 -0700)]
Merge branch 'ras-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
"The latest meager RAS updates:
- Enable processing of action-optional MCEs which have the Overflow
bit set (Tony Luck)
- -Wmissing-prototypes warning fix and a build fix (Valdis
Klētnieks)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS: Build debugfs.o only when enabled in Kconfig
RAS: Fix prototype warnings
x86/mce: Don't check for the overflow bit on action optional machine checks
Linus Torvalds [Mon, 16 Sep 2019 20:38:45 +0000 (13:38 -0700)]
Merge tag 'edac_for_5.4' of git://git./linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
"The new thing this time around is that we have three maintainers now
and a new, old repo. New because it is new for the EDAC tree which is
hosted there from now on and old because it is Tony's and mine's old
RAS repo which we still use occasionally when the stuff isn't in tip.
Summary:
- EDAC tree has three maintainers and one new designated reviewer
now, so that the work can scale better.
- New driver for Mellanox' BlueField SoC DDR controller (Shravan
Kumar Ramani)
- AMD Rome support in amd64_edac (Yazen Ghannam and Isaac Vaughn)
- Misc fixes, cleanups and code improvements"
* tag 'edac_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Add PCI device IDs for family 17h, model 70h
MAINTAINERS: Add Robert as a EDAC reviewer
EDAC/mc_sysfs: Make debug messages consistent
EDAC/mc_sysfs: Remove pointless gotos
EDAC: Prefer 'unsigned int' to bare use of 'unsigned'
EDAC/amd64: Support asymmetric dual-rank DIMMs
EDAC/amd64: Cache secondary Chip Select registers
EDAC/amd64: Decode syndrome before translating address
EDAC/amd64: Find Chip Select memory size using Address Mask
EDAC/amd64: Initialize DIMM info for systems with more than two channels
EDAC/amd64: Recognize DRAM device type ECC capability
EDAC/amd64: Support more than two controllers for chip selects handling
EDAC/mc: Cleanup _edac_mc_free() code
EDAC, pnd2: Fix ioremap() size in dnv_rd_reg()
EDAC, mellanox: Add ECC support for BlueField DDR4
EDAC/altera: Use the proper type for the IRQ status bits
EDAC/mc: Fix grain_bits calculation
edac: altera: Move Stratix10 SDRAM ECC to peripheral
MAINTAINERS: update EDAC entry to reflect current tree and maintainers
Linus Torvalds [Mon, 16 Sep 2019 20:34:04 +0000 (13:34 -0700)]
Merge tag 'tpmdd-next-
20190902' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"A new driver for fTPM living inside ARM TEE was added this round.
In addition to that, there are three bug fixes and one clean up"
* tag 'tpmdd-next-
20190902' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm/tpm_ftpm_tee: Document fTPM TEE driver
tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE
tpm: Remove a deprecated comments about implicit sysfs locking
tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts
tpm_tis_core: Turn on the TPM before probing IRQ's
MAINTAINERS: fix style in KEYS-TRUSTED entry
Linus Torvalds [Mon, 16 Sep 2019 16:28:19 +0000 (09:28 -0700)]
Merge tag 'core-process-v5.4' of git://git./linux/kernel/git/brauner/linux
Pull pidfd/waitid updates from Christian Brauner:
"This contains two features and various tests.
First, it adds support for waiting on process through pidfds by adding
the P_PIDFD type to the waitid() syscall. This completes the basic
functionality of the pidfd api (cf. [1]). In the meantime we also have
a new adition to the userspace projects that make use of the pidfd
api. The qt project was nice enough to send a mail pointing out that
they have a pr up to switch to the pidfd api (cf. [2]).
Second, this tag contains an extension to the waitid() syscall to make
it possible to wait on the current process group in a race free manner
(even though the actual problem is very unlikely) by specifing 0
together with the P_PGID type. This extension traces back to a
discussion on the glibc development mailing list.
There are also a range of tests for the features above. Additionally,
the test-suite which detected the pidfd-polling race we fixed in [3]
is included in this tag"
[1] https://lwn.net/Articles/794707/
[2] https://codereview.qt-project.org/c/qt/qtbase/+/108456
[3] commit
b191d6491be6 ("pidfd: fix a poll race when setting exit_state")
* tag 'core-process-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
waitid: Add support for waiting for the current process group
tests: add pidfd poll tests
tests: move common definitions and functions into pidfd.h
pidfd: add pidfd_wait tests
pidfd: add P_PIDFD to waitid()
André Almeida [Mon, 16 Sep 2019 14:07:59 +0000 (11:07 -0300)]
null_blk: format pr_* logs with pr_fmt
Instead of writing "null_blk: " at the beginning of each
pr_err/info/warn log message, format messages using pr_fmt() macro.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
André Almeida [Mon, 16 Sep 2019 14:07:58 +0000 (11:07 -0300)]
null_blk: match the type of parameter nr_devices
Since the variable nr_devices is an unsigned int, the module_param()
should also use this type. Change the type so they can match.
Fixes:
f7c4ce890dd2 ("null_blk: validate the number of devices")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
André Almeida [Mon, 16 Sep 2019 14:07:57 +0000 (11:07 -0300)]
null_blk: do not fail the module load with zero devices
The module load should fail only if there is something wrong with the
configuration or if an error prevents it to work properly. The module
should be able to be loaded with (nr_device == 0), since it will not
trigger errors or be in malfunction state. Preventing loading with zero
devices also breaks applications that configures this module using
configfs API. Remove the nr_device check to fix this.
Fixes:
f7c4ce890dd2 ("null_blk: validate the number of devices")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ingo Molnar [Mon, 16 Sep 2019 12:04:28 +0000 (14:04 +0200)]
Merge branch 'sched/rt' into sched/core, to pick up -rt changes
Pick up the first couple of patches working towards PREEMPT_RT.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Masahiro Yamada [Thu, 12 Sep 2019 05:23:54 +0000 (14:23 +0900)]
s390: remove pointless drivers-y in drivers/s390/Makefile
This is unused.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Thomas Richter [Tue, 16 Apr 2019 09:36:26 +0000 (09:36 +0000)]
s390/cpum_sf: Fix line length and format string
Rewrite some lines to match line length and replace
format string 0x%x to %#x. Add and remove blank line.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Sebastian Ott [Tue, 10 Sep 2019 13:45:04 +0000 (15:45 +0200)]
s390/pci: fix MSI message data
After recent changes the MSI message data needs to specify the
function-relative IRQ number.
Reported-and-tested-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Hou Tao [Tue, 21 May 2019 07:59:04 +0000 (15:59 +0800)]
block: also check RQF_STATS in blk_mq_need_time_stamp()
In __blk_mq_end_request() if block stats needs update, we should
ensure now is valid instead of 0 even when iostat is disabled.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hou Tao [Tue, 21 May 2019 07:59:03 +0000 (15:59 +0800)]
block: make rq sector size accessible for block stats
Currently rq->data_len will be decreased by partial completion or
zeroed by completion, so when blk_stat_add() is invoked, data_len
will be zero and there will never be samples in poll_cb because
blk_mq_poll_stats_bkt() will return -1 if data_len is zero.
We could move blk_stat_add() back to __blk_mq_complete_request(),
but that would make the effort of trying to call ktime_get_ns()
once in vain. Instead we can reuse throtl_size field, and use
it for both block stats and block throttle, and adjust the
logic in blk_mq_poll_stats_bkt() accordingly.
Fixes:
4bc6339a583c ("block: move blk_stat_add() to __blk_mq_end_request()")
Tested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sun, 15 Sep 2019 21:19:32 +0000 (14:19 -0700)]
Linux 5.3
Linus Torvalds [Sun, 15 Sep 2019 19:32:03 +0000 (12:32 -0700)]
Revert "ext4: make __ext4_get_inode_loc plug"
This reverts commit
b03755ad6f33b7b8cd7312a3596a2dbf496de6e7.
This is sad, and done for all the wrong reasons. Because that commit is
good, and does exactly what it says: avoids a lot of small disk requests
for the inode table read-ahead.
However, it turns out that it causes an entirely unrelated problem: the
getrandom() system call was introduced back in 2014 by commit
c6e9d6f38894 ("random: introduce getrandom(2) system call"), and people
use it as a convenient source of good random numbers.
But part of the current semantics for getrandom() is that it waits for
the entropy pool to fill at least partially (unlike /dev/urandom). And
at least ArchLinux apparently has a systemd that uses getrandom() at
boot time, and the improvements in IO patterns means that existing
installations suddenly start hanging, waiting for entropy that will
never happen.
It seems to be an unlucky combination of not _quite_ enough entropy,
together with a particular systemd version and configuration. Lennart
says that the systemd-random-seed process (which is what does this early
access) is supposed to not block any other boot activity, but sadly that
doesn't actually seem to be the case (possibly due bogus dependencies on
cryptsetup for encrypted swapspace).
The correct fix is to fix getrandom() to not block when it's not
appropriate, but that fix is going to take a lot more discussion. Do we
just make it act like /dev/urandom by default, and add a new flag for
"wait for entropy"? Do we add a boot-time option? Or do we just limit
the amount of time it will wait for entropy?
So in the meantime, we do the revert to give us time to discuss the
eventual fix for the fundamental problem, at which point we can re-apply
the ext4 inode table access optimization.
Reported-by: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Brown [Sun, 15 Sep 2019 09:32:06 +0000 (10:32 +0100)]
Merge branch 'spi-5.4' into spi-next
Mark Brown [Sun, 15 Sep 2019 09:32:04 +0000 (10:32 +0100)]
Merge branch 'spi-5.3' into spi-linus
Ben Hutchings [Sat, 14 Sep 2019 11:24:21 +0000 (12:24 +0100)]
Documentation: kbuild: Add document about reproducible builds
In the Distribution Kernels track at Linux Plumbers Conference there
was some discussion around the difficulty of making kernel builds
reproducible.
This is a solved problem, but the solutions don't appear to be
documented in one place. This document lists the issues I know about
and the settings needed to ensure reproducibility.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Linus Torvalds [Sat, 14 Sep 2019 23:07:40 +0000 (16:07 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The main change here is a revert of reverts. We recently simplified
some code that was thought unnecessary; however, since then KVM has
grown quite a few cond_resched()s and for that reason the simplified
code is prone to livelocks---one CPUs tries to empty a list of guest
page tables while the others keep adding to them. This adds back the
generation-based zapping of guest page tables, which was not
unnecessary after all.
On top of this, there is a fix for a kernel memory leak and a couple
of s390 fixlets as well"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot
KVM: x86: work around leak of uninitialized stack contents
KVM: nVMX: handle page fault in vmread
KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl
KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()
Daniel Xu [Sat, 14 Sep 2019 21:23:45 +0000 (14:23 -0700)]
io_uring: increase IORING_MAX_ENTRIES to 32K
Some workloads can require far more than 4K oustanding entries. For
example memcached can have ~300K sockets over ~40 cores. Bumping the max
to 32K seems to work pretty well.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sat, 14 Sep 2019 23:02:49 +0000 (16:02 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fix from Michael Tsirkin:
"A last minute revert
The 32-bit build got broken by the latest defence in depth patch.
Revert and we'll try again in the next cycle"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
Revert "vhost: block speculation of translated descriptors"
Linus Torvalds [Sat, 14 Sep 2019 22:58:02 +0000 (15:58 -0700)]
Merge tag 'riscv/for-v5.3' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fix from Paul Walmsley:
"Last week, Palmer and I learned that there was an error in the RISC-V
kernel image header format that could make it less compatible with the
ARM64 kernel image header format. I had missed this error during my
original reviews of the patch.
The kernel image header format is an interface that impacts
bootloaders, QEMU, and other user tools. Those packages must be
updated to align with whatever is merged in the kernel. We would like
to avoid proliferating these image formats by keeping the RISC-V
header as close as possible to the existing ARM64 header. Since the
arch/riscv patch that adds support for the image header was merged
with our v5.3-rc1 pull request as commit
0f327f2aaad6a ("RISC-V: Add
an Image header that boot loader can parse."), we think it wise to try
to fix this error before v5.3 is released.
The fix itself should be backwards-compatible with any project that
has already merged support for premature versions of this interface.
It primarily involves ensuring that the RISC-V image header has
something useful in the same field as the ARM64 image header"
* tag 'riscv/for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: modify the Image header to improve compatibility with the ARM64 header
Michael S. Tsirkin [Sat, 14 Sep 2019 19:21:51 +0000 (15:21 -0400)]
Revert "vhost: block speculation of translated descriptors"
This reverts commit
a89db445fbd7f1f8457b03759aa7343fa530ef6b.
I was hasty to include this patch, and it breaks the build on 32 bit.
Defence in depth is good but let's do it properly.
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Linus Torvalds [Sat, 14 Sep 2019 19:20:38 +0000 (12:20 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Don't corrupt xfrm_interface parms before validation, from Nicolas
Dichtel.
2) Revert use of usb-wakeup in btusb, from Mario Limonciello.
3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from
Leonardo Bras.
4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso.
5) Missing ULP check in sock_map, from John Fastabend.
6) Fix receive statistic handling in forcedeth, from Zhu Yanjun.
7) Fix length of SKB allocated in 6pack driver, from Christophe
JAILLET.
8) ip6_route_info_create() returns an error pointer, not NULL. From
Maciej Żenczykowski.
9) Only add RDS sock to the hashes after rs_transport is set, from
Ka-Cheong Poon.
10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets.
11) Presence of transmit IPSEC offload in an SKB is not tested for
correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff
Kirsher.
12) Need rcu_barrier() when register_netdevice() takes one of the
notifier based failure paths, from Subash Abhinov Kasiviswanathan.
13) Fix leak in sctp_do_bind(), from Mao Wenan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
cdc_ether: fix rndis support for Mediatek based smartphones
sctp: destroy bucket if failed to bind addr
sctp: remove redundant assignment when call sctp_get_port_local
sctp: change return type of sctp_get_port_local
ixgbevf: Fix secpath usage for IPsec Tx offload
sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()'
ixgbe: Fix secpath usage for IPsec TX offload.
net: qrtr: fix memort leak in qrtr_tun_write_iter
net: Fix null de-reference of device refcount
ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()'
tun: fix use-after-free when register netdev failed
tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR
ixgbe: fix double clean of Tx descriptors with xdp
ixgbe: Prevent u8 wrapping of ITR value to something less than 10us
mlx4: fix spelling mistake "veify" -> "verify"
net: hns3: fix spelling mistake "undeflow" -> "underflow"
net: lmc: fix spelling mistake "runnin" -> "running"
NFC: st95hf: fix spelling mistake "receieve" -> "receive"
net/rds: An rds_sock is added too early to the hash table
mac80211: Do not send Layer 2 Update frame before authorization
...
Linus Torvalds [Sat, 14 Sep 2019 19:08:19 +0000 (12:08 -0700)]
Merge tag 'mmc-v5.3-rc8' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- tmio: Fixup runtime PM management during probe and remove
- sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC
- bcm2835: Prevent lockups when terminating work
* tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: tmio: Fixup runtime PM management during remove
mmc: tmio: Fixup runtime PM management during probe
Revert "mmc: tmio: move runtime PM enablement to the driver implementations"
Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller"
Revert "mmc: bcm2835: Terminate timeout work synchronously"
Linus Torvalds [Sat, 14 Sep 2019 18:54:57 +0000 (11:54 -0700)]
Merge tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"From the maintainer summit, just some last minute fixes for final:
lima:
- fix gem_wait ioctl
core:
- constify modes list
i915:
- DP MST high color depth regression
- GPU hangs on vulkan compute workloads"
* tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm:
drm/lima: fix lima_gem_wait() return value
drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+
drm/i915: Limit MST to <= 8bpc once again
drm/modes: Make the whitelist more const
Pavel Begunkov [Sat, 14 Sep 2019 17:31:50 +0000 (20:31 +0300)]
bfq: Fix bfq linkage error
Since commit
795fe54c2a828099e ("bfq: Add per-device weight"), bfq uses
blkg_conf_prep() and blkg_conf_finish(), which are not exported. So, it
causes linkage error if bfq compiled as a module.
Fixes:
795fe54c2a828099e ("bfq: Add per-device weight")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Joe Perches [Fri, 6 Sep 2019 21:11:51 +0000 (14:11 -0700)]
docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
As Linus said in:
https://lore.kernel.org/lkml/CAHk-=wgoxnmsj8GEVFJSvTwdnWm8wVJthefNk2n6+4TC=20e0Q@mail.gmail.com/
It's a pointless warning, making for more complex code, and
making people remember esoteric printf format details that have no
reason for existing.
The "h" and "hh" things should never be used. The only reason for them
being used if if you have an "int", but you want to print it out as a
"char" (and honestly, that is a really bad reason, you'd be better off
just using a proper cast to make the code more obvious).
So if what you have a "char" (or unsigned char) you should always just
print it out as an "int", knowing that the compiler already did the
proper type conversion.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Louis Taylor <louis@kragniz.eu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Palmer Dabbelt [Fri, 13 Sep 2019 20:38:43 +0000 (13:38 -0700)]
Documentation: Add "earlycon=sbi" to the admin guide
This argument is supported on RISC-V systems and widely used, but was
not documented here.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Federico Vaga [Sun, 8 Sep 2019 06:29:01 +0000 (08:29 +0200)]
doc:lock: remove reference to clever use of read-write lock
Remove the clever example about read-write lock because this type of
lock is not recommended anymore (according to the very same document).
So there is no reason to teach clever things that people should not do.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Ian Abbott [Wed, 11 Sep 2019 16:39:41 +0000 (17:39 +0100)]
devices.txt: improve entry for comedi (char major 98)
Describe how the comedi minor device numbers are split across comedi
devices and comedi subdevices.
Replace the current, long dead URL with an official URL for the Comedi
project.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Paolo Bonzini [Sat, 14 Sep 2019 07:25:30 +0000 (09:25 +0200)]
Merge tag 'kvm-s390-master-5.3-1' of git://git./linux/kernel/git/kvms390/linux into kvm-master
KVM: s390: Fixes for 5.3
- prevent a user triggerable oops in the migration code
- do not leak kernel stack content
Sean Christopherson [Fri, 13 Sep 2019 02:46:02 +0000 (19:46 -0700)]
KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot
James Harvey reported a livelock that was introduced by commit
d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when
removing a memslot"").
The livelock occurs because kvm_mmu_zap_all() as it exists today will
voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs
to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck
in an infinite loop as it can never zap all pages before observing lock
contention or the need to reschedule. The equivalent of kvm_mmu_zap_all()
that was in use at the time of the reverted commit (
4e103134b8623, "KVM:
x86/mmu: Zap only the relevant pages when removing a memslot") employed
a fast invalidate mechanism and was not susceptible to the above livelock.
There are three ways to fix the livelock:
- Reverting the revert (commit
d012a06ab1d23) is not a viable option as
the revert is needed to fix a regression that occurs when the guest has
one or more assigned devices. It's unlikely we'll root cause the device
assignment regression soon enough to fix the regression timely.
- Remove the conditional reschedule from kvm_mmu_zap_all(). However, although
removing the reschedule would be a smaller code change, it's less safe
in the sense that the resulting kvm_mmu_zap_all() hasn't been used in
the wild for flushing memslots since the fast invalidate mechanism was
introduced by commit
6ca18b6950f8d ("KVM: x86: use the fast way to
invalidate all pages"), back in 2013.
- Reintroduce the fast invalidate mechanism and use it when zapping shadow
pages in response to a memslot being deleted/moved, which is what this
patch does.
For all intents and purposes, this is a revert of commit
ea145aacf4ae8
("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of
commit
7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate
all pages""), i.e. restores the behavior of commit
5304b8d37c2a5 ("KVM:
MMU: fast invalidate all pages") and commit
6ca18b6950f8d ("KVM: x86:
use the fast way to invalidate all pages") respectively.
Fixes:
d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"")
Reported-by: James Harvey <jamespharvey20@gmail.com>
Cc: Alex Willamson <alex.williamson@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fuqian Huang [Thu, 12 Sep 2019 04:18:17 +0000 (12:18 +0800)]
KVM: x86: work around leak of uninitialized stack contents
Emulation of VMPTRST can incorrectly inject a page fault
when passed an operand that points to an MMIO address.
The page fault will use uninitialized kernel stack memory
as the CR2 and error code.
The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just ensure
that the error code and CR2 are zero.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Cc: stable@vger.kernel.org
[add comment]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 13 Sep 2019 22:26:27 +0000 (00:26 +0200)]
KVM: nVMX: handle page fault in vmread
The implementation of vmread to memory is still incomplete, as it
lacks the ability to do vmread to I/O memory just like vmptrst.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paul Walmsley [Sat, 14 Sep 2019 01:35:50 +0000 (18:35 -0700)]
riscv: modify the Image header to improve compatibility with the ARM64 header
Part of the intention during the definition of the RISC-V kernel image
header was to lay the groundwork for a future merge with the ARM64
image header. One error during my original review was not noticing
that the RISC-V header's "magic" field was at a different size and
position than the ARM64's "magic" field. If the existing ARM64 Image
header parsing code were to attempt to parse an existing RISC-V kernel
image header format, it would see a magic number 0. This is
undesirable, since it's our intention to align as closely as possible
with the ARM64 header format. Another problem was that the original
"res3" field was not being initialized correctly to zero.
Address these issues by creating a 32-bit "magic2" field in the RISC-V
header which matches the ARM64 "magic" field. RISC-V binaries will
store "RSC\x05" in this field. The intention is that the use of the
existing 64-bit "magic" field in the RISC-V header will be deprecated
over time. Increment the minor version number of the file format to
indicate this change, and update the documentation accordingly. Fix
the assembler directives in head.S to ensure that reserved fields are
properly zero-initialized.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reported-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Karsten Merker <merker@debian.org>
Link: https://lore.kernel.org/linux-riscv/194c2f10c9806720623430dbf0cc59a965e50448.camel@wdc.com/T/#u
Link: https://lore.kernel.org/linux-riscv/mhng-755b14c4-8f35-4079-a7ff-e421fd1b02bc@palmer-si-x1e/T/#t
Jens Axboe [Fri, 13 Sep 2019 21:02:04 +0000 (15:02 -0600)]
Merge branch 'md-next' of git://git./linux/kernel/git/song/md into for-5.4/block
Pull MD fixes from Song.
* 'md-next' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md:
raid5: use bio_end_sector in r5_next_bio
raid5: remove STRIPE_OPS_REQ_PENDING
md: add feature flag MD_FEATURE_RAID0_LAYOUT
md/raid0: avoid RAID0 data corruption due to layout confusion.
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: don't increment read_errors on EILSEQ return
Guoqing Jiang [Thu, 12 Sep 2019 10:10:16 +0000 (12:10 +0200)]
raid5: use bio_end_sector in r5_next_bio
Actually, we calculate bio's end sector here, so use the common
way for the purpose.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Guoqing Jiang [Thu, 12 Sep 2019 10:10:15 +0000 (12:10 +0200)]
raid5: remove STRIPE_OPS_REQ_PENDING
This stripe state is not used anymore after commit
51acbcec6c42b24
("md: remove CONFIG_MULTICORE_RAID456"), so remove the obsoleted
state.
gjiang@nb01257:~/md$ grep STRIPE_OPS_REQ_PENDING drivers/md/ -r
drivers/md/raid5.c: (1 << STRIPE_OPS_REQ_PENDING) |
drivers/md/raid5.h: STRIPE_OPS_REQ_PENDING,
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
NeilBrown [Mon, 9 Sep 2019 06:52:29 +0000 (16:52 +1000)]
md: add feature flag MD_FEATURE_RAID0_LAYOUT
Due to a bug introduced in Linux 3.14 we cannot determine the
correctly layout for a multi-zone RAID0 array - there are two
possibilities.
It is possible to tell the kernel which to chose using a module
parameter, but this can be clumsy to use. It would be best if
the choice were recorded in the metadata.
So add a feature flag for this purpose.
If it is set, then the 'layout' field of the superblock is used
to determine which layout to use.
If this flag is not set, then mddev->layout gets set to -1,
which causes the module parameter to be required.
Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>
NeilBrown [Mon, 9 Sep 2019 06:30:02 +0000 (16:30 +1000)]
md/raid0: avoid RAID0 data corruption due to layout confusion.
If the drives in a RAID0 are not all the same size, the array is
divided into zones.
The first zone covers all drives, to the size of the smallest.
The second zone covers all drives larger than the smallest, up to
the size of the second smallest - etc.
A change in Linux 3.14 unintentionally changed the layout for the
second and subsequent zones. All the correct data is still stored, but
each chunk may be assigned to a different device than in pre-3.14 kernels.
This can lead to data corruption.
It is not possible to determine what layout to use - it depends which
kernel the data was written by.
So we add a module parameter to allow the old (0) or new (1) layout to be
specified, and refused to assemble an affected array if that parameter is
not set.
Fixes:
20d0189b1012 ("block: Introduce new bio_split()")
cc: stable@vger.kernel.org (3.14+)
Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <songliubraving@fb.com>