drm/i915/guc: Reset implementation for new GuC interface

Reset implementation for new GuC interface. This is the legacy reset
implementation which is called when the i915 owns the engine hang check.
Future patches will offload the engine hang check to GuC but we will
continue to maintain this legacy path as a fallback and this code path
is also required if the GuC dies.

With the new GuC interface it is not possible to reset individual
engines - it is only possible to reset the GPU entirely. This patch
forces an entire chip reset if any engine hangs.

v2:
 (Michal)
  - Check for -EPIPE rather than -EIO (CT deadlock/corrupt check)
v3:
 (John H)
  - Split into a series of smaller patches
v4:
 (John H)
  - Fix typo
  - Add braces around if statements in reset code
v5:
 (Checkpatch)
  - Fix warnings

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-9-matthew.brost@intel.com

drm/i915: Move active request tracking to a vfunc

Move active request tracking to a backend vfunc rather than assuming all
backends want to do this in the manner. In the of case execlists /
ring submission the tracking is on the physical engine while with GuC
submission it is on the context.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-8-matthew.brost@intel.com

drm/i915: Add i915_sched_engine destroy vfunc

This is required to allow backend specific cleanup

v2:
 (John H)
  - Rework commit message

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-7-matthew.brost@intel.com

drm/i915/guc: Direct all breadcrumbs for a class to single breadcrumbs

With GuC virtual engines the physical engine which a request executes
and completes on isn't known to the i915. Therefore we can't attach a
request to a physical engines breadcrumbs. To work around this we create
a single breadcrumbs per engine class when using GuC submission and
direct all physical engine interrupts to this breadcrumbs.

v2:
 (John H)
  - Rework header file structure so intel_engine_mask_t can be in
    intel_engine_types.h

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
CC: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-6-matthew.brost@intel.com

drm/i915/guc: Disable bonding extension with GuC submission

Update the bonding extension to return -ENODEV when using GuC submission
as this extension fundamentally will not work with the GuC submission
interface.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-5-matthew.brost@intel.com

drm/i915: Hold reference to intel_context over life of i915_request

Hold a reference to the intel_context over life of an i915_request.
Without this an i915_request can exist after the context has been
destroyed (e.g. request retired, context closed, but user space holds a
reference to the request from an out fence). In the case of GuC
submission + virtual engine, the engine that the request references is
also destroyed which can trigger bad pointer dref in fence ops (e.g.
i915_fence_get_driver_name). We could likely change
i915_fence_get_driver_name to avoid touching the engine but let's just
be safe and hold the intel_context reference.

v2:
 (John Harrison)
  - Update comment explaining how GuC mode and execlists mode deal with
    virtual engines differently

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-4-matthew.brost@intel.com

drm/i915/guc: Make hangcheck work with GuC virtual engines

The serial number tracking of engines happens at the backend of
request submission and was expecting to only be given physical
engines. However, in GuC submission mode, the decomposition of virtual
to physical engines does not happen in i915. Instead, requests are
submitted to their virtual engine mask all the way through to the
hardware (i.e. to GuC). This would mean that the heart beat code
thinks the physical engines are idle due to the serial number not
incrementing. Which in turns means hangcheck does not work for
GuC virtual engines.

This patch updates the tracking to decompose virtual engines into
their physical constituents and tracks the request against each. This
is not entirely accurate as the GuC will only be issuing the request
to one physical engine. However, it is the best that i915 can do given
that it has no knowledge of the GuC's scheduling decisions.

Downside of this is that all physical engines constituting a GuC
virtual engine will be periodically unparked (even during just a single
context executing) in order to be pinged with a heartbeat request.
However the power and performance cost of this is not expected to be
measurable (due low frequency of heartbeat pulses) and it is considered
an easier option than trying to make changes to GuC firmware.

v2:
 (Tvrtko)
  - Update commit message
  - Have default behavior if no vfunc present

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-3-matthew.brost@intel.com

drm/i915/guc: GuC virtual engines

Implement GuC virtual engines. Rather simple implementation, basically
just allocate an engine, setup context enter / exit function to virtual
engine specific functions, set all other variables / functions to guc
versions, and set the engine mask to that of all the siblings.

v2: Update to work with proto-ctx
v3:
 (Daniele)
  - Drop include, add comment to intel_virtual_engine_has_heartbeat

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-2-matthew.brost@intel.com

drm/i915/ehl: unconditionally flush the pages on acquire

EHL and JSL add the 'Bypass LLC' MOCS entry, which should make it
possible for userspace to bypass the GTT caching bits set by the kernel,
as per the given object cache_level. This is troublesome since the heavy
flush we apply when first acquiring the pages is skipped if the kernel
thinks the object is coherent with the GPU. As a result it might be
possible to bypass the cache and read the contents of the page directly,
which could be stale data. If it's just a case of userspace shooting
themselves in the foot then so be it, but since i915 takes the stance of
always zeroing memory before handing it to userspace, we need to prevent
this.

v2: this time actually set cache_dirty in put_pages()
v3: move to get_pages() which looks simpler

BSpec: 34007
References: 046091758b50 ("Revert "drm/i915/ehl: Update MOCS table for EHL"")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723105045.400841-2-matthew.auld@intel.com

drm/i915: document caching related bits

Try to document the object caching related bits, like cache_coherent and
cache_dirty.

v2(Ville):
 - As pointed out by Ville, fix the completely incorrect assumptions
   about the "partial" coherency on shared LLC platforms.
v3(Daniel):
 - Fix nonsense about "dirtying" the cache with reads.
v4(Daniel):
 - Various improvements, including adding some more details for WT.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723105045.400841-1-matthew.auld@intel.com

drm/i915/gem: Migrate to system at dma-buf attach time (v7)

Until we support p2p dma or as a complement to that, migrate data
to system memory at dma-buf attach time if possible.

v2:
- Rebase on dynamic exporter. Update the igt_dmabuf_import_same_driver
  selftest to migrate if we are LMEM capable.
v3:
- Migrate also in the pin() callback.
v4:
- Migrate in attach
v5: (jason)
- Lock around the migration
v6: (jason)
- Move the can_migrate check outside the lock
- Rework the selftests to test more migration conditions.  In
  particular, SMEM, LMEM, and LMEM+SMEM are all checked.
v7: (mauld)
- Misc style nits

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-9-jason@jlekstrand.net

drm/i915/gem: Correct the locking and pin pattern for dma-buf (v8)

If our exported dma-bufs are imported by another instance of our driver,
that instance will typically have the imported dma-bufs locked during
dma_buf_map_attachment(). But the exporter also locks the same reservation
object in the map_dma_buf() callback, which leads to recursive locking.

So taking the lock inside _pin_pages_unlocked() is incorrect.

Additionally, the current pinning code path is contrary to the defined
way that pinning should occur.

Remove the explicit pin/unpin from the map/umap functions and move them
to the attach/detach allowing correct locking to occur, and to match
the static dma-buf drm_prime pattern.

Add a live selftest to exercise both dynamic and non-dynamic
exports.

v2:
- Extend the selftest with a fake dynamic importer.
- Provide real pin and unpin callbacks to not abuse the interface.
v3: (ruhl)
- Remove the dynamic export support and move the pinning into the
  attach/detach path.
v4: (ruhl)
- Put pages does not need to assert on the dma-resv
v5: (jason)
- Lock around dma_buf_unmap_attachment() when emulating a dynamic
  importer in the subtests.
- Use pin_pages_unlocked
v6: (jason)
- Use dma_buf_attach instead of dma_buf_attach_dynamic in the selftests
v7: (mauld)
- Use __i915_gem_object_get_pages (2 __underscores) instead of the
  4 ____underscore version in the selftests
v8: (mauld)
- Drop the kernel doc from the static i915_gem_dmabuf_attach function
- Add missing "err = PTR_ERR()" to a bunch of selftest error cases

Reported-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-8-jason@jlekstrand.net

drm/i915/gem: Always call obj->ops->migrate unless can_migrate fails

Without TTM, we have no such hook so we exit early but this is fine
because we use TTM on all LMEM platforms and, on integrated platforms,
there is no real migration.  If we do have the hook, it's better to just
let TTM handle the migration because it knows where things are actually
placed.

This fixes a bug where i915_gem_object_migrate fails to migrate newly
created LMEM objects.  In that scenario, the object has obj->mm.region
set to LMEM but TTM has it in SMEM because that's where all new objects
are placed there prior to getting actual pages.  When we invoke
i915_gem_object_migrate, it exits early because, from the point of view
of the GEM object, it's already in LMEM and no migration is needed.
Then, when we try to pin the pages, __i915_ttm_get_pages is called
which, unaware of our failed attempt at a migration, places the object
in SMEM.  This only happens on newly created objects because they have
this weird state where TTM thinks they're in SMEM, GEM thinks they're in
LMEM, and the reality is that they don't exist at all.

It's better if GEM just always calls into TTM and let's TTM handle
things.  That way the lies stay better contained.  Once the migration is
complete, the object will have pages, obj->mm.region will be correct,
and we're done lying.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-7-jason@jlekstrand.net

drm/i915/gem/ttm: Only call __i915_gem_object_set_pages if needed

__i915_ttm_get_pages does two things.  First, it calls ttm_bo_validate()
to check the given placement and migrate the BO if needed.  Then, it
updates the GEM object to match, in case the object was migrated.  If
no migration occured, however, we might still have pages on the GEM
object in which case we don't need to fetch them from TTM and call
__i915_gem_object_set_pages.  This hasn't been a problem before because
the primary user of __i915_ttm_get_pages is __i915_gem_object_get_pages
which only calls it if the GEM object doesn't have pages.

However, i915_ttm_migrate also uses __i915_ttm_get_pages to do the
migration so this meant it was unsafe to call on an already populated
object.  This patch checks i915_gem_object_has_pages() before trying to
__i915_gem_object_set_pages so i915_ttm_migrate is safe to call, even on
populated objects.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-6-jason@jlekstrand.net

drm/i915/gem: Unify user object creation (v3)

Instead of hand-rolling the same three calls in each function, pull them
into an i915_gem_object_create_user helper.  Apart from re-ordering of
the placements array ENOMEM check, there should be no functional change.

v2 (Matthew Auld):
 - Add the call to i915_gem_flush_free_objects() from
   i915_gem_dumb_create() in a separate patch
 - Move i915_gem_object_alloc() below the simple error checks
v3 (Matthew Auld):
 - Add __ to i915_gem_object_create_user and kerneldoc which warns the
   caller that it's not validating anything.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-5-jason@jlekstrand.net

drm/i915/gem: Call i915_gem_flush_free_objects() in i915_gem_dumb_create()

This doesn't really fix anything serious since the chances of a client
creating and destroying a mass of dumb BOs is pretty low.  However, it
is called by the other two create IOCTLs to garbage collect old objects.
Call it here too for consistency.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-4-jason@jlekstrand.net

drm/i915/gem: Refactor placement setup for i915_gem_object_create* (v2)

Since we don't allow changing the set of regions after creation, we can
make ext_set_placements() build up the region set directly in the
create_ext and assign it to the object later.  This is similar to what
we did for contexts with the proto-context only simpler because there's
no funny object shuffling.  This will be used in the next patch to allow
us to de-duplicate a bunch of code.  Also, since we know the maximum
number of regions up-front, we can use a fixed-size temporary array for
the regions.  This simplifies memory management a bit for this new
delayed approach.

v2 (Matthew Auld):
 - Get rid of MAX_N_PLACEMENTS
 - Drop kfree(placements) from set_placements()
v3 (Matthew Auld):
 - Properly set ext_data->n_placements

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-3-jason@jlekstrand.net

drm/i915/gem: Check object_can_migrate from object_migrate

We don't roll them together entirely because there are still a couple
cases where we want a separate can_migrate check.  For instance, the
display code checks that you can migrate a buffer to LMEM before it
accepts it in fb_create.  The dma-buf import code also uses it to do an
early check and return a different error code if someone tries to attach
a LMEM-only dma-buf to another driver.

However, no one actually wants to call object_migrate when can_migrate
has failed.  The stated intention is for self-tests but none of those
actually take advantage of this unsafe migration.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-2-jason@jlekstrand.net

drm/i915/gt: nuke gen6_hw_id

This is only used by GRAPHICS_VER == 6 and GRAPHICS_VER == 7. All other
recent platforms do not depend on this field, so it doesn't make much
sense to keep it generic like that. Instead, just do a mapping from
engine class to HW ID in the single place that is needed.

v2: use macros with the direct register address instead of calculating
from the legacy HW_ID (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723002551.3906535-1-lucas.demarchi@intel.com

drm/i915/xehp: Xe_HP forcewake support

Implement Xe_HP forcewake handling.  While we're at it, let's reorder to
the forcewake assignment if/else ladder to match our usual driver
conventions.

Co-authored-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-6-matthew.d.roper@intel.com

drm/i915/xehp: Extra media engines - Part 3 (reset)

Xe_HP can have a lot of extra media engines. This patch adds the reset
support for them.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-5-matthew.d.roper@intel.com

drm/i915/xehp: Extra media engines - Part 2 (interrupts)

Xe_HP can have a lot of extra media engines. This patch adds the
interrupt handler support for them.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-4-matthew.d.roper@intel.com

drm/i915/xehp: Extra media engines - Part 1 (engine definitions)

Xe_HP can have a lot of extra media engines. This patch adds the basic
definitions for them.

v2:
 - Re-order intel_gt_info and intel_device_info slightly to avoid
   unnecessary padding now that we've increased the size of
   intel_engine_mask_t.  (Tvrtko)
v3:
 - Drop the .hw_id assignments.  (Lucas)
v4:
 - Fix graphics_ver typo for VCS4 (should be 12, not 11).  (Lucas)

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723191024.1553405-1-matthew.d.roper@intel.com

drm/i915/xehp: Define multicast register ranges

Since we can't steer multicast register reads during ring-based
workaround verification, we need to define the multicast ranges where
failure to steer could potentially cause us to read back from a
fused-off register instance.

As with gen12, we can ignore the multicast ranges that the bspec
describes as 'SQIDI' since all instances of those registers will always
be present and we'll always be able to read back a workaround value that
was written with multicast.

Bspec: 66534
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714031540.3539704-11-matthew.d.roper@intel.com

drm/i915: Extend Wa_1406941453 to adl-p

Workaround also needed for alderlake-P.

HSDES: 14010801662
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210722192041.92346-1-jose.souza@intel.com

drm/i915/uapi: reject set_domain for discrete

The CPU domain should be static for discrete, and on DG1 we don't need
any flushing since everything is already coherent, so really all this
does is an object wait, for which we have an ioctl. Longer term the
desired caching should be an immutable creation time property for the
BO, which can be set with something like gem_create_ext.

One other user is iris + userptr, which uses the set_domain to probe all
the pages to check if the GUP succeeds, however we now have a PROBE
flag for this purpose.

v2: add some more kernel doc, also add the implicit rules with caching

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-5-matthew.auld@intel.com

drm/i915/xehp: VDBOX/VEBOX fusing registers are enable-based

On Xe_HP the fusing register is renamed and changed to have the "enable"
semantics, but otherwise remains compatible (mmio address, bitmask
ranges) with older platforms.

To simplify things we do not add a new register definition but just stop
inverting the fusing masks before processing them.

Bspec: 52615
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-6-matthew.d.roper@intel.com

drm/i915/gt: rename legacy engine->hw_id to engine->gen6_hw_id

We kept adding new engines and for that increasing hw_id unnecessarily:
it's not used since GRAPHICS_VER == 8. Prepend "gen6" to the field and
try to pack it in the structs to give a hint this field is actually not
used in recent platforms.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-4-lucas.demarchi@intel.com

drm/i915/gt: nuke unused legacy engine hw_id

The engine hw_id is only used by RING_FAULT_REG(), which is not used
by GRAPHICS_VER >= 8. We did use hw_id on recent platforms to set
the engine's guc_id, but that is not the case anymore since
commit c784e5249e77 ("drm/i915/guc: Update to use firmware v49.0.1"):
now we only use class and id information to generate guc_id.

We tend to keep adding new defines just to be consistent, but let's try
to remove them and let them defined to 0 for engines that only exist on
gen8+ platforms.

v2: Reword commit message and add information about when we stopped
using hw_id (Matt Roper)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-3-lucas.demarchi@intel.com

drm/i915/gt: fix platform prefix

gen8_clear_engine_error_register() is actually not used by
GRAPHICS_VER >= 8, since for those we are using another register that is
not engine-dependent. Fix the platform prefix, to make clear we are not
using any GEN6_RING_FAULT_REG_* one GRAPHICS_VER >= 8.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-2-lucas.demarchi@intel.com

drm/i915: Add intel_context tracing

Add intel_context tracing. These trace points are particular helpful
when debugging the GuC firmware and can be enabled via
CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS kernel config option.

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-19-matthew.brost@intel.com

drm/i915/guc: Add trace point for GuC submit

Add trace point for GuC submit. Extended existing request trace points
to include submit fence value,, guc_id, and ring tail value.

v2: Fix white space alignment in i915_request_add trace point
v3: Delete dep_from , dep_to (Tvrtko)

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-18-matthew.brost@intel.com

drm/i915/guc: Update GuC debugfs to support new GuC

Update GuC debugfs to support the new GuC structures.

v2:
 (John Harrison)
  - Remove intel_lrc_reg.h include from i915_debugfs.c
 (Michal)
  - Rename GuC debugfs functions

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-17-matthew.brost@intel.com

drm/i915/guc: Update intel_gt_wait_for_idle to work with GuC

When running the GuC the GPU can't be considered idle if the GuC still
has contexts pinned. As such, a call has been added in
intel_gt_wait_for_idle to idle the UC and in turn the GuC by waiting for
the number of unpinned contexts to go to zero.

v2: rtimeout -> remaining_timeout
v3: Drop unnecessary includes, guc_submission_busy_loop ->
guc_submission_send_busy_loop, drop negatie timeout trick, move a
refactor of guc_context_unpin to earlier path (John H)
v4: Add stddef.h back into intel_gt_requests.h, sort circuit idle
function if not in GuC submission mode

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-16-matthew.brost@intel.com

drm/i915/guc: Ensure G2H response has space in buffer

Ensure G2H response has space in the buffer before sending H2G CTB as
the GuC can't handle any backpressure on the G2H interface.

v2:
 (Matthew)
  - s/INTEL_GUC_SEND/INTEL_GUC_CT_SEND
v3:
 (Matthew)
  - Add G2H credit accounting to blocking path, add g2h_release_space
    helper
 (John H)
  - CTB_G2H_BUFFER_SIZE / 4 == G2H_ROOM_BUFFER_SIZE

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-15-matthew.brost@intel.com

drm/i915/guc: Disable semaphores when using GuC scheduling

Semaphores are an optimization and not required for basic GuC submission
to work properly. Disable until we have time to do the implementation to
enable semaphores and tune them for performance. Also long direction is
just to delete semaphores from the i915 so another reason to not enable
these for GuC submission.

This patch fixes an existing bugs where I915_ENGINE_HAS_SEMAPHORES was
not honored correctly.

v2: Reword commit message
v3:
 (John H)
  - Add text to commit indicating this also fixing an existing bug
v4:
 (John H)
  - s/bug/bugs

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-14-matthew.brost@intel.com

drm/i915/guc: Ensure request ordering via completion fences

If two requests are on the same ring, they are explicitly ordered by the
HW. So, a submission fence is sufficient to ensure ordering when using
the new GuC submission interface. Conversely, if two requests share a
timeline and are on the same physical engine but different context this
doesn't ensure ordering on the new GuC submission interface. So, a
completion fence needs to be used to ensure ordering.

v2:
 (Daniele)
  - Don't delete spin lock
v3:
 (Daniele)
  - Delete forward dec

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-13-matthew.brost@intel.com

drm/i915: Disable preempt busywait when using GuC scheduling

Disable preempt busywait when using GuC scheduling. This isn't needed as
the GuC controls preemption when scheduling.

v2:
 (John H):
  - Fix commit message

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-12-matthew.brost@intel.com

drm/i915/guc: Extend deregistration fence to schedule disable

Extend the deregistration context fence to fence whne a GuC context has
scheduling disable pending.

v2:
 (John H)
  - Update comment why we check the pin count within spin lock

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-11-matthew.brost@intel.com

drm/i915/guc: Disable engine barriers with GuC during unpin

Disable engine barriers for unpinning with GuC. This feature isn't
needed with the GuC as it disables context scheduling before unpinning
which guarantees the HW will not reference the context. Hence it is
not necessary to defer unpinning until a kernel context request
completes on each engine in the context engine mask.

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-10-matthew.brost@intel.com

drm/i915/guc: Defer context unpin until scheduling is disabled

With GuC scheduling, it isn't safe to unpin a context while scheduling
is enabled for that context as the GuC may touch some of the pinned
state (e.g. LRC). To ensure scheduling isn't enabled when an unpin is
done, a call back is added to intel_context_unpin when pin count == 1
to disable scheduling for that context. When the response CTB is
received it is safe to do the final unpin.

Future patches may add a heuristic / delay to schedule the disable
call back to avoid thrashing on schedule enable / disable.

v2:
 (John H)
  - s/drm_dbg/drm_err
 (Daneiel)
  - Clean up sched state function

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-9-matthew.brost@intel.com

drm/i915/guc: Insert fence on context when deregistering

Sometimes during context pinning a context with the same guc_id is
registered with the GuC. In this a case deregister must be done before
the context can be registered. A fence is inserted on all requests while
the deregister is in flight. Once the G2H is received indicating the
deregistration is complete the context is registered and the fence is
released.

v2:
 (John H)
  - Fix commit message

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-8-matthew.brost@intel.com

drm/i915/guc: Implement GuC context operations for new inteface

Implement GuC context operations which includes GuC specific operations
alloc, pin, unpin, and destroy.

v2:
 (Daniel Vetter)
  - Use msleep_interruptible rather than cond_resched in busy loop
 (Michal)
  - Remove C++ style comment
v3:
 (Matthew Brost)
  - Drop GUC_ID_START
 (John Harrison)
  - Fix a bunch of typos
  - Use drm_err rather than drm_dbg for G2H errors
 (Daniele)
  - Fix ;; typo
  - Clean up sched state functions
  - Add lockdep for guc_id functions
  - Don't call __release_guc_id when guc_id is invalid
  - Use MISSING_CASE
  - Add comment in guc_context_pin
  - Use shorter path to rpm
 (Daniele / CI)
  - Don't call release_guc_id on an invalid guc_id in destroy
v4:
 (Daniel Vetter)
  - Add FIXME comment

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-7-matthew.brost@intel.com

drm/i915/guc: Add bypass tasklet submission path to GuC

Add bypass tasklet submission path to GuC. The tasklet is only used if H2G
channel has backpresure.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-6-matthew.brost@intel.com

drm/i915/guc: Implement GuC submission tasklet

Implement GuC submission tasklet for new interface. The new GuC
interface uses H2G to submit contexts to the GuC. Since H2G use a single
channel, a single tasklet is used for the submission path.

Also the per engine interrupt handler has been updated to disable the
rescheduling of the physical engine tasklet, when using GuC scheduling,
as the physical engine tasklet is no longer used.

In this patch the field, guc_id, has been added to intel_context and is
not assigned. Patches later in the series will assign this value.

v2:
 (John Harrison)
  - Clean up some comments
v3:
 (John Harrison)
  - More comment cleanups

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-5-matthew.brost@intel.com

drm/i915/guc: Add LRC descriptor context lookup array

Add LRC descriptor context lookup array which can resolve the
intel_context from the LRC descriptor index. In addition to lookup, it
can determine if the LRC descriptor context is currently registered with
the GuC by checking if an entry for a descriptor index is present.
Future patches in the series will make use of this array.

v2:
 (Michal)
  - "linux/xarray.h" -> <linux/xarray.h>
  - s/lrc/LRC
 (John H)
  - Fix commit message

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-4-matthew.brost@intel.com

drm/i915/guc: Remove GuC stage descriptor, add LRC descriptor

Remove old GuC stage descriptor, add LRC descriptor which will be used
by the new GuC interface implemented in this patch series.

v2:
 (John Harrison)
  - s/lrc/LRC/g

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-3-matthew.brost@intel.com

drm/i915/guc: Add new GuC interface defines and structures

Add new GuC interface defines and structures while maintaining old ones
in parallel.

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-2-matthew.brost@intel.com

drm/i915/xehp: New engine context offsets

The layout of some engine contexts has changed on Xe_HP.  Define the new
offsets.

Bspec: 45585, 46256
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-10-matthew.d.roper@intel.com

drm/i915/xehp: Handle new device context ID format

Xe_HP changes the format of the context ID from past platforms.

Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-9-matthew.d.roper@intel.com

drm/i915/selftests: Allow for larger engine counts

Increasing the engine count causes a couple of local array variables
to exceed the kernel stack limit. So make them dynamic allocations
instead.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-8-matthew.d.roper@intel.com

drm/i915/gen12: Use fuse info to enable SFC

In Gen12 there are various fuse combinations and in each configuration
vdbox engine may be connected to SFC depending on which engines are
available, so we need to set the SFC capability based on fuse value from
the hardware. Even numbered physical instance always have SFC, odd
numbered physical instances have SFC only if previous even instance is
fused off.

v2:
 - Minor style & typo fixes (Tvrtko)
 - Drop an unwanted 'inline' (Tvrtko)

Bspec: 48028
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-7-matthew.d.roper@intel.com

Merge branch 'topic/xehp-dg2-definitions-2021-07-21' into drm-intel-gt-next

As we begin applying XeHP and DG2 patches, the basic platform
definitions and macros (like IS_DG2()) will be needed in both
drm-intel-next and drm-intel-gt-next.  Those initial definition patches
are applied to a topic branch and merged to both trees.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915/dg2: add DG2 platform info

DG2 has Xe_LPD display (version 13) and Xe_HPG (version 12.55) graphics.
There are two variants (treated as subplatforms in the code):  DG2-G10
and DG2-G11 that require independent programming in some areas (e.g.,
workarounds).

Bspec: 44472, 44474, 46197, 48028, 48077
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-4-matthew.d.roper@intel.com

drm/i915/xehpsdv: add initial XeHP SDV definitions

XeHP SDV is a Intel® dGPU without display. This is just the definition
of some basic platform macros, by large a copy of current state of
Tigerlake which does not reflect the end state of this platform.

v2:
 - Switch to intel_step infrastructure for stepping matches. (Jani)
v3:
 - Bring earlier in patch series and leave addition of new media engines
   to the engine mask for a later patch.

Bspec: 44467, 48077
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-3-matthew.d.roper@intel.com

drm/i915: Add XE_HP initial definitions

Our _FEATURES macro went back to GEN7, extending each other, making it
difficult to grasp what was really enabled/disabled. Take the
opportunity of the GEN -> XE_HP name break and also break with the
feature inheritance.

For XE_HP this basically goes from GEN12 back to GEN7 coalescing the
features making sure the overrides remain, remove all the
display-specific features and sort it.

Then also remove the definitions that would be overridden by
DGFX_FEATURES and those that were 0 (since that is the default).
Exception here is has_master_unit_irq: although it is a feature that
started with DG1 and is true for all DGFX platforms, it's also true for
XE_HP in general.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-2-matthew.d.roper@intel.com

drm/i915: Add release id version

Besides the arch version returned by GRAPHICS_VER(), new platforms
contain a "release id" to make clear the difference from one platform to
another.

The release id number is not formally defined by hardware until future
platforms that will expose it via a new GMD_ID register.  For the
platforms we support before that register becomes available we will set
the values in software and we can set them as we please. So the plan is
to set them so we can group different features under a single
GRAPHICS_VER_FULL() check.

After GMD_ID is used, the usefulness of a "full version check" will be
greatly reduced and will be mostly used for deciding workarounds and a
few code paths. So it makes sense to keep it as a separate field from
graphics_ver. Also, as a platform with `release == n` may be closer
feature-wise to `n - 2` than to `n - 1`, use the word "release" rather
than the more common "minor" for this

This is a mix of 2 independent changes: one by me and the other by Matt
Roper.

v2:
  - Reword commit message to make it clearer why we don't call it
    "minor" (Matt Roper and Tvrtko)
  - Rename variables s/*_ver_release/*_rel/ and print them in a single
    line formatted as {ver}.{rel:2} (Jani and Matt Roper)

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-2-lucas.demarchi@intel.com
(cherry picked from commit ca6374e267e2735fe382fe95de2a8a9c30c6bdb3)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915: do not abbreviate version in debugfs

Brevity is not needed here, so just spell out "* version" in the string.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-1-lucas.demarchi@intel.com
(cherry picked from commit 0f9b145a0a0ab0d3d4143c20e2ca347d8a105e33)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915: Make the kmem slab for i915_buddy_block a global

There's no reason that I can tell why this should be per-i915_buddy_mm
and doing so causes KMEM_CACHE to throw dmesg warnings because it tries
to create a debugfs entry with the name i915_buddy_block multiple times.
We could handle this by carefully giving each slab its own name but that
brings its own pain because then we have to store that string somewhere
and manage the lifetimes of the different slabs.  The most likely
outcome would be a global atomic which we increment to get a new name or
something like that.

The much easier solution is to use the i915_globals system like we do
for every other slab in i915.  This ensures that we have exactly one of
them for each i915 driver load and it gets neatly created on module load
and destroyed on module unload.  Using the globals system also means
that its now tied into the shrink handler so we can properly respond to
low-memory situations.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 88be9a0a06b7 ("drm/i915/ttm: add ttm_buddy_man")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
[danvet: Rebase against removal of global shrink code]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-7-jason@jlekstrand.net

drm/i915: Use a table for i915_init/exit (v2)

If the driver was not fully loaded, we may still have globals lying
around.  If we don't tear those down in i915_exit(), we'll leak a bunch
of memory slabs.  This can happen two ways: use_kms = false and if we've
run mock selftests.  In either case, we have an early exit from
i915_init which happens after i915_globals_init() and we need to clean
up those globals.

The mock selftests case is especially sticky.  The load isn't entirely
a no-op.  We actually do quite a bit inside those selftests including
allocating a bunch of mock objects and running tests on them.  Once all
those tests are complete, we exit early from i915_init().  Perviously,
i915_init() would return a non-zero error code on failure and a zero
error code on success.  In the success case, we would get to i915_exit()
and check i915_pci_driver.driver.owner to detect if i915_init exited early
and do nothing.  In the failure case, we would fail i915_init() but
there would be no opportunity to clean up globals.

The most annoying part is that you don't actually notice the failure as
part of the self-tests since leaking a bit of memory, while bad, doesn't
result in anything observable from userspace.  Instead, the next time we
load the driver (usually for next IGT test), i915_globals_init() gets
invoked again, we go to allocate a bunch of new memory slabs, those
implicitly create debugfs entries, and debugfs warns that we're trying
to create directories and files that already exist.  Since this all
happens as part of the next driver load, it shows up in the dmesg-warn
of whatever IGT test ran after the mock selftests.

While the obvious thing to do here might be to call i915_globals_exit()
after selftests, that's not actually safe.  The dma-buf selftests call
i915_gem_prime_export which creates a file.  We call dma_buf_put() on
the resulting dmabuf which calls fput() on the file.  However, fput()
isn't immediate and gets flushed right before syscall returns.  This
means that all the fput()s from the selftests don't happen until right
before the module load syscall used to fire off the selftests returns
which is after i915_init().  If we call i915_globals_exit() in
i915_init() after selftests, we end up freeing slabs out from under
objects which won't get released until fput() is flushed at the end of
the module load syscall.

The solution here is to let i915_init() return success early and detect
the early success in i915_exit() and only tear down globals and nothing
else.  This way the module loads successfully, regardless of the success
or failure of the tests.  Because we've not enumerated any PCI devices,
no device nodes are created and it's entirely useless from userspace.
The only thing the module does at that point is hold on to a bit of
memory until we unload it and i915_exit() is called.  Importantly, this
means that everything from our selftests has the ability to properly
flush out between i915_init() and i915_exit() because there is at least
one syscall boundary in between.

In order to handle all the delicate init/exit cases, we convert the
whole thing to a table of init/exit pairs and track the init status in
the new init_progress global.  This allows us to ensure that i915_exit()
always tears down exactly the things that i915_init() successfully
initialized.  We also allow early-exit of i915_init() without failure by
an init function returning > 0.  This is useful for nomodeset, and
selftests.  For the mock selftests, we convert them to always return 1
so we get the desired behavior of the driver always succeeding to load
the driver and then properly tearing down the partially loaded driver.

v2 (Tvrtko Ursulin):
 - Guard init_funcs[i].exit with GEM_BUG_ON(i >= ARRAY_SIZE(init_funcs))
v2 (Daniel Vetter):
 - Update the docstring for i915.mock_selftests

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-4-jason@jlekstrand.net

drm/i915: Call i915_globals_exit() if pci_register_device() fails

In the unlikely event that pci_register_device() fails, we were tearing
down our PMU setup but not globals.  This leaves a bunch of memory slabs
lying around.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 32eb6bcfdda9 ("drm/i915: Make request allocation caches global")
[danvet: Fix conflicts against removal of the globals_flush
infrastructure.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-3-jason@jlekstrand.net

drm/i915: Call i915_globals_exit() after i915_pmu_exit()

We should tear down in the opposite order we set up.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-2-jason@jlekstrand.net

drm/i915: Ditch i915 globals shrink infrastructure

This essentially reverts

commit 84a1074920523430f9dc30ff907f4801b4820072
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Jan 24 11:36:08 2018 +0000

    drm/i915: Shrink the GEM kmem_caches upon idling

mm/vmscan.c:do_shrink_slab() is a thing, if there's an issue with it
then we need to fix that there, not hand-roll our own slab shrinking
code in i915.

Also when this was added there was only one other caller of
kmem_cache_shrink (added 2005 to the acpi code). Now there's a 2nd one
outside of i915 code in a kunit test, which seems legit since that
wants to very carefully control what's in the kmem_cache. This out of
a total of over 500 calls to kmem_cache_create. This alone should have
been warning sign enough that we're doing something silly.

Noticed while reviewing a patch set from Jason to fix up some issues
in our i915_init() and i915_exit() module load/cleanup code. Now that
i915_globals.c isn't any different than normal init/exit functions, we
should convert them over to one unified table and remove
i915_globals.[hc] entirely.

v2: Improve commit message (Jason)

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721183229.4136488-1-daniel.vetter@ffwll.ch

drm/i915: Make GT workaround upper bounds exclusive

Workarounds are documented in the bspec with an exclusive upper bound
(i.e., a "fixed" stepping that no longer needs the workaround).  This
makes our driver's use of an inclusive upper bound for stepping ranges
confusing; the differing notation between code and bspec makes it very
easy for mistakes to creep in.

Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use
an exclusive upper bound like the bspec does.  This also has the benefit
of helping make sure workarounds are properly handled for new minor
steppings that show up (e.g., an A1 between the A0 and B0 we already
knew about) --- if the new intermediate stepping pulls in hardware fixes
early, there will be an update to the workaround definition which lets
us know we need to change our code.  If the new stepping does not pull a
hardware fix earlier, then the new stepping will already be captured
properly by the "[begin, fix)" range in the code.

We'll probably need to be extra vigilant in code review of new
workarounds for the near future to make sure developers notice the new
semantics of workaround bounds.  But we just migrated a bunch of our
platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people
are already adjusting to the new macros and now is a good time to make
this change too.

[mattrope: Split out GT changes to apply through gt-next tree]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-8-matthew.d.roper@intel.com

drm/i915: Program DFR enable/disable as a GT workaround

DFR programming (which we enable as an optimization on gen11, but must
ensure is disabled on gen12) should be handled as a GT workaround rather
than clock gating initialization.  This will ensure that the programming
of these registers is verified with our typical workaround checks.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-4-matthew.d.roper@intel.com

drm/i915/icl: Drop a couple unnecessary workarounds

While doing a quick sanity check of the ICL workarounds in the driver I
noticed a few things that should be updated:

 * There's no mention in the bspec that WaPipelineFlushCoherentLines
   is needed on gen11 (both the current WA database and the old,
   deprecated page 20196 were checked); it appears this might have just
   been copied from the gen9 list?  Even if this were needed, it doesn't
   seem like this was the correct implementation anyway since the gen9
   workaround is supposed to be implemented in the indirect context bb
   (as we do in gen8_emit_flush_coherentl3_wa() on gen8/gen9).

 * WaForwardProgressSoftReset does not appear in the current workaround
   database.  The old deprecated workaround list has a note indicating
   the workaround was dropped in 2017, so we should be safe to drop it
   from the code too.

While we're at it, add the formal workaround ID number to
WaDisableBankHangMode (our hardware team made a transition from
text-based workaround names to ID numbers partway through the
development of ICL, which is why some workarounds only have names, some
only have numbers, and some have both).

Bspec: 33450
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-3-matthew.d.roper@intel.com

drm/i915: Fix application of WaInPlaceDecompressionHang

On SKL we've been applying this workaround on H0+ steppings, which is
actually backwards; H0 is supposed to be the first stepping where the
workaround is no longer needed.  Flip the bounds so that the workaround
applies to all steppings _before_ H0.

On BXT we've been applying this workaround to all steppings, but the
bspec tells us it's only needed until C0.  Pre-C0 GT steppings only
appeared in pre-production hardware, which we no longer support in the
driver, so we can drop the workaround completely for this platform.

On ICL we've been applying this workaround to all steppings, but there
doesn't seem to be any indication that this workaround was ever needed
for this platform (even now-deprecated page 20196 of the bspec doesn't
mention it).  We can go ahead and drop it.

I also don't see any mention of this workaround being needed for KBL,
although this may be an oversight since the workaround is needed for all
steppings of CFL.  I'll leave the workaround in place for KBL to be
safe.

Bspec: 14091, 33450
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-2-matthew.d.roper@intel.com

drm/i915: Add TTM offset argument to mmap.

The FIXED mapping is only used for ttm, and tells userspace that the
mapping type is pre-defined. This disables the other type of mmap
offsets when discrete memory is used, so fix the selftests as well.

Document the struct as well, so it shows up in docbook.

Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mauld: Included minor fixes from the review comments]
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714122833.766586-1-maarten.lankhorst@linux.intel.com

drm/i915: Correct the docs for intel_engine_cmd_parser

In 93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous
cmdparser""), the parameters to intel_engine_cmd_parser() were altered
without updating the docs, causing Fi.CI.DOCS to start failing.

Fixes: 93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"")
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Added 'Fixes:' tag and corrected the hash for the ancestor]

drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc

Add the missing kernel-doc.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-3-matthew.auld@intel.com

drm/i915/uapi: reject caching ioctls for discrete

It's a noop on DG1, and in the future when need to support other devices
which let us control the coherency, then it should be an immutable
creation time property for the BO. This will likely be controlled
through a new gem_create_ext extension.

v2: add some kernel doc for the discrete changes, and document the
    implicit rules

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-2-matthew.auld@intel.com

Revert "drm/i915: Skip over MI_NOOP when parsing"

This reverts a6c5e2aea704 ("drm/i915: Skip over MI_NOOP when parsing").
It complicates the batch parsing code a bit and increases indentation
for no reason other than fast-skipping a command that userspace uses
only rarely.  Sure, there may be IGT tests that fill batches with NOOPs
but that's not a case we should optimize for in the kernel.  We should
optimize for code clarity instead.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-6-jason@jlekstrand.net

drm/i915: Drop error handling from dma_fence_work

Asynchronous command parsing was the only thing which ever returned a
non-zero error.  With that gone, we can drop the error handling from
dma_fence_work.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-5-jason@jlekstrand.net

drm/i915: Remove allow_alloc from i915_gem_object_get_sg*

This reverts the rest of 0edbb9ba1bfe ("drm/i915: Move cmd parser
pinning to execbuffer").  Now that the only user of i915_gem_object_get_sg
without allow_alloc has been removed, we can drop the parameter.  This
portion of the revert was broken into its own patch to aid review.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-4-jason@jlekstrand.net

Revert "drm/i915: Propagate errors on awaiting already signaled fences"

This reverts commit 9e31c1fe45d555a948ff66f1f0e3fe1f83ca63f7.  Ever
since that commit, we've been having issues where a hang in one client
can propagate to another.  In particular, a hang in an app can propagate
to the X server which causes the whole desktop to lock up.

Error propagation along fences sound like a good idea, but as your bug
shows, surprising consequences, since propagating errors across security
boundaries is not a good thing.

What we do have is track the hangs on the ctx, and report information to
userspace using RESET_STATS. That's how arb_robustness works. Also, if my
understanding is still correct, the EIO from execbuf is when your context
is banned (because not recoverable or too many hangs). And in all these
cases it's up to userspace to figure out what is all impacted and should
be reported to the application, that's not on the kernel to guess and
automatically propagate.

What's more, we're also building more features on top of ctx error
reporting with RESET_STATS ioctl: Encrypted buffers use the same, and the
userspace fence wait also relies on that mechanism. So it is the path
going forward for reporting gpu hangs and resets to userspace.

So all together that's why I think we should just bury this idea again as
not quite the direction we want to go to, hence why I think the revert is
the right option here.

For backporters: Please note that you _must_ have a backport of
https://lore.kernel.org/dri-devel/20210602164149.391653-2-jason@jlekstrand.net/
for otherwise backporting just this patch opens up a security bug.

v2: Augment commit message. Also restore Jason's sob that I
accidentally lost.

v3: Add a note for backporters

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reported-by: Marcin Slusarz <marcin.slusarz@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Marcin Slusarz <marcin.slusarz@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3080
Fixes: 9e31c1fe45d5 ("drm/i915: Propagate errors on awaiting already signaled fences")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-3-jason@jlekstrand.net

drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"

This reverts 686c7c35abc2 ("drm/i915/gem: Asynchronous cmdparser").  The
justification for this commit in the git history was a vague comment
about getting it out from under the struct_mutex.  While this may
improve perf for some workloads on Gen7 platforms where we rely on the
command parser for features such as indirect rendering, no numbers were
provided to prove such an improvement.  It claims to closed two
gitlab/bugzilla issues but with no explanation whatsoever as to why or
what bug it's fixing.

Meanwhile, by moving command parsing off to an async callback, it leaves
us with a problem of what to do on error.  When things were synchronous,
EXECBUFFER2 would fail with an error code if parsing failed.  When
moving it to async, we needed another way to handle that error and the
solution employed was to set an error on the dma_fence and then trust
that said error gets propagated to the client eventually.  Moving back
to synchronous will help us untangle the fence error propagation mess.

This also reverts most of 0edbb9ba1bfe ("drm/i915: Move cmd parser
pinning to execbuffer") which is a refactor of some of our allocation
paths for asynchronous parsing.  Now that everything is synchronous, we
don't need it.

v2 (Daniel Vetter):
 - Add stabel Cc and Fixes tag

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: <stable@vger.kernel.org> # v5.6+
Fixes: 9e31c1fe45d5 ("drm/i915: Propagate errors on awaiting already signaled fences")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-2-jason@jlekstrand.net

drm/i915: Fix missing docbook chapters for i915 uapi.

I noticed when grepping for DOC: that those were defined
in the header, but not actually used. Fix it by removing
all chapters and the internal annotation, so the docbook
generated chapters are used.

This reverts the changes to driver-uapi.rst by the referenced commit
577729533cdc ("drm/i915: Document the Virtual Engine uAPI")

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715120842.806605-1-maarten.lankhorst@linux.intel.com
Fixes: 577729533cdc ("drm/i915: Document the Virtual Engine uAPI")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

Merge branch 'topic/revid_steppings' into drm-intel-gt-next

The switch from old old IS_FOO_REVID() macros to the new table-based
IS_FOO_{GT,DISP}_STEP() macros is needed on both drm-intel-next (for
display-based DMC matching) and drm-intel-gt-next (for workaround
guards).  To avoid conflicts, we'll apply the patches to a topic branch
and merge it to both intel branches to ensure the transition to the
new macros is clean.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915/icl: Drop workarounds that only apply to pre-production steppings

We're past the point at which we usually drop workarounds that were
never needed on production hardware.  The driver will already print an
error and apply taint if loaded on pre-production hardware.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-13-matthew.d.roper@intel.com

drm/i915/cnl: Drop all workarounds

All of the Cannon Lake hardware that came out had graphics fused off,
and our userspace drivers have already dropped their support for the
platform; CNL-specific code in i915 that isn't inherited by subsequent
platforms is effectively dead code.  Let's remove all of the
CNL-specific workarounds as a quick and easy first step.

References: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6899
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-12-matthew.d.roper@intel.com

drm/i915/dg1: Use revid->stepping tables

Switch DG1 to use a revid->stepping table as we're trying to do on all
platforms going forward.

This removes the last use of IS_REVID() and REVID_FOREVER, so remove
those now-unused macros as well to prevent their accidental use on
future platforms.

v2:
 - Use COMMON_STEP() macro in table.  (Anusha)

Bspec: 44463
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com

drm/i915/rkl: Use revid->stepping tables

Switch RKL to use a revid->stepping table as we're trying to do on all
platforms going forward.

Bspec: 44501
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-10-matthew.d.roper@intel.com

drm/i915/jsl_ehl: Use revid->stepping tables

Switch JSL/EHL to use a revid->stepping table as we're trying to do on
all platforms going forward.

v2:
 - Use COMMON_STEP().  (Anusha)

Bspec: 29153
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-9-matthew.d.roper@intel.com

drm/i915/icl: Use revid->stepping tables

Switch ICL to use a revid->stepping table as we're trying to do on all
platforms going forward.  While we're at it, let's include some
additional steppings that have popped up, even if we don't yet have any
workarounds tied to those steppings (we probably need to audit our
workaround list soon to see if any of the bounds have moved or if new
workarounds have appeared).

Note that the current bspec table is missing information about how to
map PCI revision ID to GT/display steppings; it only provides an SoC
stepping.  The mapping to GT/display steppings (which aren't always the
same as the SoC stepping) used to be in the bspec, but was apparently
dropped during an update in Nov 2019; I've made my changes here based on
an older bspec snapshot that still had the necessary information.  We've
requested that the missing information be restored.

I'm only including the production revids in the table here since we're
past the point at which we usually stop trying to support pre-production
hardware.  An appropriate check is added to
intel_detect_preproduction_hw() to print an error and taint the kernel
just in case someone still tries to load the driver on old
pre-production hardware.

v2:
 - Drop pre-production steppings and add error/taint at startup when
   loading on pre-production hardware.

Bspec: 21141  # pre-Nov 2019 snapshot
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-8-matthew.d.roper@intel.com

drm/i915/glk: Use revid->stepping tables

Switch GLK to use a revid->stepping table as we're trying to do on all
platforms going forward.  Pre-production and placeholder revisions are
omitted.

Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.

Bspec: 19131
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-7-matthew.d.roper@intel.com

drm/i915/bxt: Use revid->stepping tables

Switch BXT to use a revid->stepping table as we're trying to do on all
platforms going forward.  Note that the REVID macros we had before
weren't being used anywhere in the code and weren't even correct; the
table values come from the bspec (and omits all the placeholder and
preproduction revisions).

Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.

Bspec: 13620
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-6-matthew.d.roper@intel.com

drm/i915/kbl: Drop pre-production revision from stepping table

We're long past the point where we need to care about pre-production
hardware, and we already warn the user and taint the kernel if we detect
the driver is being loaded on pre-production hardware.

Bspec: 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-5-matthew.d.roper@intel.com

drm/i915/skl: Use revid->stepping tables

Switch SKL to use a revid->stepping table as we're trying to do on all
platforms going forward.  Also drop the preproduction revisions and add
the newer steppings we hadn't already handled.

Note that SKL has a case where a newer revision ID corresponds to an
older GT/disp stepping (0x9 -> STEP_J0, 0xA -> STEP_I1).  Also, the lack
of a revision ID 0x8 in the table is intentional and not an oversight.
We'll re-write the KBL-specific comment to make it clear that these kind
of quirks are expected.

v2:
 - Since GT and display steppings are always identical on SKL use a
   macro to set both values at once in a more readable manner.  (Anusha)
 - Drop preproduction steppings.

Bspec: 13626
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-4-matthew.d.roper@intel.com

drm/i915: Make pre-production detection use direct revid comparison

Although we're converting our workarounds to use a revid->stepping
lookup table, the function that detects pre-production hardware should
continue to compare against PCI revision ID values directly.  These are
listed in the bspec as integers, so it's easier to confirm their
correctness if we just use an integer literal rather than a symbolic
name anyway.

Bspec: 13620, 19131, 13626, 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-3-matthew.d.roper@intel.com

drm/i915/step: s/<platform>_revid_tbl/<platform>_revids

Simplify the stepping info array name.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-2-matthew.d.roper@intel.com

drm/i915/gtt: drop the page table optimisation

We skip filling out the pt with scratch entries if the va range covers
the entire pt, since we later have to fill it with the PTEs for the
object pages anyway. However this might leave open a small window where
the PTEs don't point to anything valid for the HW to consume.

When for example using 2M GTT pages this fill_px() showed up as being
quite significant in perf measurements, and ends up being completely
wasted since we ignore the pt and just use the pde directly.

Anyway, currently we have our PTE construction split between alloc and
insert, which is probably slightly iffy nowadays, since the alloc
doesn't actually allocate anything anymore, instead it just sets up the
page directories and points the PTEs at the scratch page. Later when we
do the insert step we re-program the PTEs again. Better might be to
squash the alloc and insert into a single step, then bringing back this
optimisation(along with some others) should be possible.

Fixes: 14826673247e ("drm/i915: Only initialize partially filled pagetables")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713130431.2392740-1-matthew.auld@intel.com

drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc

Convert all the drm_i915_gem_set_domain bits to proper kernel doc.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-4-matthew.auld@intel.com

drm/i915/uapi: convert drm_i915_gem_caching to kernel doc

Convert all the drm_i915_gem_caching bits to proper kernel doc.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-2-matthew.auld@intel.com

drm/i915/guc: Module load failure test for CT buffer creation

Add several module failure load inject points in the CT buffer creation
code path.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-8-matthew.brost@intel.com

drm/i915/guc: Optimize CTB writes and reads

CTB writes are now in the path of command submission and should be
optimized for performance. Rather than reading CTB descriptor values
(e.g. head, tail) which could result in accesses across the PCIe bus,
store shadow local copies and only read/write the descriptor values when
absolutely necessary. Also store the current space in the each channel
locally.

v2:
 (Michal)
  - Add additional sanity checks for head / tail pointers
  - Use GUC_CTB_HDR_LEN rather than magic 1
v3:
 (Michal / John H)
  - Drop redundant check of head value
v4:
 (John H)
  - Drop redundant checks of tail / head values
v5:
 (Michal)
  - Address more nits
v6:
 (Michal)
  - Add GEM_BUG_ON sanity check on ctb->space

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-7-matthew.brost@intel.com

drm/i915/guc: Add stall timer to non blocking CTB send function

Implement a stall timer which fails H2G CTBs once a period of time
with no forward progress is reached to prevent deadlock.

v2:
 (Michal)
  - Improve error message in ct_deadlock()
  - Set broken when ct_deadlock() returns true
  - Return -EPIPE on ct_deadlock()
v3:
 (Michal)
  - Add ms to stall timer comment
 (Matthew)
  - Move broken check to intel_guc_ct_send()

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-6-matthew.brost@intel.com

drm/i915/guc: Add non blocking CTB send function

Add non blocking CTB send function, intel_guc_send_nb. GuC submission
will send CTBs in the critical path and does not need to wait for these
CTBs to complete before moving on, hence the need for this new function.

The non-blocking CTB now must have a flow control mechanism to ensure
the buffer isn't overrun. A lazy spin wait is used as we believe the
flow control condition should be rare with a properly sized buffer.

The function, intel_guc_send_nb, is exported in this patch but unused.
Several patches later in the series make use of this function.

v2:
 (Michal)
  - Use define for H2G room calculations
  - Move INTEL_GUC_SEND_NB define
 (Daniel Vetter)
  - Use msleep_interruptible rather than cond_resched
v3:
 (Michal)
  - Move includes to following patch
  - s/INTEL_GUC_SEND_NB/INTEL_GUC_CT_SEND_NB/g
v4:
 (John H)
  - Update comment, add type local variable

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-5-matthew.brost@intel.com

drm/i915/guc: Increase size of CTB buffers

With the introduction of non-blocking CTBs more than one CTB can be in
flight at a time. Increasing the size of the CTBs should reduce how
often software hits the case where no space is available in the CTB
buffer.

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-4-matthew.brost@intel.com

drm/i915/guc: Improve error message for unsolicited CT response

Improve the error message when a unsolicited CT response is received by
printing fence that couldn't be found, the last fence, and all requests
with a response outstanding.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-3-matthew.brost@intel.com

drm/i915/guc: Relax CTB response timeout

In upcoming patch we will allow more CTB requests to be sent in
parallel to the GuC for processing, so we shouldn't assume any more
that GuC will always reply without 10ms.

Use bigger value hardcoded value of 1s instead.

v2: Add CONFIG_DRM_I915_GUC_CTB_TIMEOUT config option
v3:
 (Daniel Vetter)
  - Use hardcoded value of 1s rather than config option
v4:
 (Michal)
  - Use defines for timeout values

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-2-matthew.brost@intel.com