rtlwifi: Set the link state

commit 619ce76f8bb850b57032501a39f26aa6c6731c70 upstream.

The present code fails to set the linked state when an interface is
added.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Add new device ID

commit f87f960b2fb802f26ee3b00c19320e57a9c583ff upstream.

Reported-by: Jan Prinsloo <janroot@gmail.com>
Tested-by: Jan Prinsloo <janroot@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Check for XHCI_PLAT in xhci_cleanup_msix()

commit 9005355af23856c55a5538c9024355785424821b upstream.

If CONFIG_PCI is enabled, make sure xhci_cleanup_msix()
doesn't try to free a bogus PCI IRQ or dereference an invalid
pci_dev when the xHCI device is actually a platform_device.

This patch should be backported to kernels as old as 3.9, that
contain the commit 52fb61250a7a132b0cfb9f4a1060a1f3c49e5a25
"xhci-plat: Don't enable legacy PCI interrupts."

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: Nokia 502 is an unusual device

commit 0e16114f2db4838251fb64f3b550996ad3585890 upstream.

The USB storage operation of Nokia Asha 502 Dual SIM smartphone running Asha
Platform 1.1.1 is unreliable in respect of data consistency (i.e. transfered
files are corrupted). A similar issue is described here:
http://discussions.nokia.com/t5/Asha-and-other-Nokia-Series-30/Nokia-301-USB-transfers-and-corrupted-files/td-p/1974170

The workaround is (MAX_SECTORS_64):
   rmmod usb_storage && modprobe usb_storage quirks=0421:06aa:m

The patch adds the tested device to the unusual list permanently.

Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cypress_m8: fix ring-indicator detection and reporting

commit 440ebadeae9298d7de3d4d105342691841ec88d0 upstream.

Fix ring-indicator (RI) status-bit definition, which was defined as CTS,
effectively preventing RI-changes from being detected while reporting
false RI status.

This bug predates git.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: add support for iBall 3.5G connect usb modem

commit 7d5c1b9c7cb5ec8e52b1adc65c484a923a8ea6c3 upstream.

Add support for iBall 3.5G connect usb modem.

$lsusb
Bus 002 Device 006: ID 1c9e:9605 OMEGA TECHNOLOGY

$usb-devices
T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9605 Rev=00.00
S:  Manufacturer=USB Modem
S:  Product=USB Modem
S:  SerialNumber=1234567890ABCDEF
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Suggested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: add new zte 3g modem pids to option driver

commit 4d90b819ae4c7ea8fd5e2bb7edc68c0f334be2e4 upstream.

Signed-off-by: Jun zhang <zhang.jun92@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, x32: Correct invalid use of user timespec in the kernel

commit 2def2ef2ae5f3990aabdbe8a755911902707d268 upstream.

The x32 case for the recvmsg() timout handling is broken:

  asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
                                      unsigned int vlen, unsigned int flags,
                                      struct compat_timespec __user *timeout)
  {
          int datagrams;
          struct timespec ktspec;

          if (flags & MSG_CMSG_COMPAT)
                  return -EINVAL;

          if (COMPAT_USE_64BIT_TIME)
                  return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
                                        flags | MSG_CMSG_COMPAT,
                                        (struct timespec *) timeout);
          ...

The timeout pointer parameter is provided by userland (hence the __user
annotation) but for x32 syscalls it's simply cast to a kernel pointer
and is passed to __sys_recvmmsg which will eventually directly
dereference it for both reading and writing.  Other callers to
__sys_recvmmsg properly copy from userland to the kernel first.

The bug was introduced by commit ee4fa23c4bfc ("compat: Use
COMPAT_USE_64BIT_TIME in net/compat.c") and should affect all kernels
since 3.4 (and perhaps vendor kernels if they backported x32 support
along with this code).

Note that CONFIG_X86_X32_ABI gets enabled at build time and only if
CONFIG_X86_X32 is enabled and ld can build x32 executables.

Other uses of COMPAT_USE_64BIT_TIME seem fine.

This addresses CVE-2014-0038.

Signed-off-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

e752x_edac: Fix pci_dev usage count

commit 90ed4988b8c030d65b41b7d13140e9376dc6ec5a upstream.

In case the device 0, function 1 is not found using pci_get_device(),
pci_scan_single_device() will be used but, differently than
pci_get_device(), it allocates a pci_dev but doesn't does bump the usage
count on the pci_dev and after few module removals and loads the pci_dev
will be freed.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Reviewed-by: mark gross <mark.gross@intel.com>
Link: http://lkml.kernel.org/r/20131205153755.GL4545@redhat.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: hugetlbfs: fix hugetlbfs optimization

commit 27c73ae759774e63313c1fbfeb17ba076cea64c5 upstream.

Commit 7cb2ef56e6a8 ("mm: fix aio performance regression for database
caused by THP") can cause dereference of a dangling pointer if
split_huge_page runs during PageHuge() if there are updates to the
tail_page->private field.

Also it is repeating compound_head twice for hugetlbfs and it is running
compound_head+compound_trans_head for THP when a single one is needed in
both cases.

The new code within the PageSlab() check doesn't need to verify that the
THP page size is never bigger than the smallest hugetlbfs page size, to
avoid memory corruption.

A longstanding theoretical race condition was found while fixing the
above (see the change right after the skip_unlock label, that is
relevant for the compound_lock path too).

By re-establishing the _mapcount tail refcounting for all compound
pages, this also fixes the below problem:

  echo 0 >/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages

  BUG: Bad page state in process bash  pfn:59a01
  page:ffffea000139b038 count:0 mapcount:10 mapping:          (null) index:0x0
  page flags: 0x1c00000000008000(tail)
  Modules linked in:
  CPU: 6 PID: 2018 Comm: bash Not tainted 3.12.0+ #25
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  Call Trace:
    dump_stack+0x55/0x76
    bad_page+0xd5/0x130
    free_pages_prepare+0x213/0x280
    __free_pages+0x36/0x80
    update_and_free_page+0xc1/0xd0
    free_pool_huge_page+0xc2/0xe0
    set_max_huge_pages.part.58+0x14c/0x220
    nr_hugepages_store_common.isra.60+0xd0/0xf0
    nr_hugepages_store+0x13/0x20
    kobj_attr_store+0xf/0x20
    sysfs_write_file+0x189/0x1e0
    vfs_write+0xc5/0x1f0
    SyS_write+0x55/0xb0
    system_call_fastpath+0x16/0x1b

Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guillaume Morin <guillaume@morinfr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid5: fix long-standing problem with bitmap handling on write failure.

commit 9f97e4b128d2ea90a5f5063ea0ee3b0911f4c669 upstream.

Before a write starts we set a bit in the write-intent bitmap.
When the write completes we clear that bit if the write was successful
to all devices.  However if the write wasn't fully successful we
should not clear the bit.  If the faulty drive is subsequently
re-added, the fact that the bit is still set ensure that we will
re-write the data that is missing.

This logic is mediated by the STRIPE_DEGRADED flag - we only clear the
bitmap bit when this flag is not set.
Currently we correctly set the flag if a write starts when some
devices are failed or missing.  But we do *not* set the flag if some
device failed during the write attempt.
This is wrong and can result in clearing the bit inappropriately.

So: set the flag when a write fails.

This bug has been present since bitmaps were introduces, so the fix is
suitable for any -stable kernel.

Reported-by: Ethan Wilson <ethan.wilson@shiftmail.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.78

md/raid10: fix two bugs in handling of known-bad-blocks.

commit b50c259e25d9260b9108dc0c2964c26e5ecbe1c1 upstream.

If we discover a bad block when reading we split the request and
potentially read some of it from a different device.

The code path of this has two bugs in RAID10.
1/ we get a spin_lock with _irq, but unlock without _irq!!
2/ The calculation of 'sectors_handled' is wrong, as can be clearly
   seen by comparison with raid1.c

This leads to at least 2 warnings and a probable crash is a RAID10
ever had known bad blocks.

Fixes: 856e08e23762dfb92ffc68fd0a8d228f9e152160
Reported-by: Damian Nowak <spam@nowaker.net>
URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid10: fix bug when raid10 recovery fails to recover a block.

commit e8b849158508565e0cd6bc80061124afc5879160 upstream.

commit e875ecea266a543e643b19e44cf472f1412708f9
    md/raid10 record bad blocks as needed during recovery.

added code to the "cannot recover this block" path to record a bad
block rather than fail the whole recovery.
Unfortunately this new case was placed *after* r10bio was freed rather
than *before*, yet it still uses r10bio.
This is will crash with a null dereference.

So move the freeing of r10bio down where it is safe.

Fixes: e875ecea266a543e643b19e44cf472f1412708f9
Reported-by: Damian Nowak <spam@nowaker.net>
URL: https://bugzilla.kernel.org/show_bug.cgi?id=68181
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix segctor bug that causes file system corruption

commit 70f2fe3a26248724d8a5019681a869abdaf3e89a upstream.

There is a bug in the function nilfs_segctor_collect, which results in
active data being written to a segment, that is marked as clean.  It is
possible, that this segment is selected for a later segment
construction, whereby the old data is overwritten.

The problem shows itself with the following kernel log message:

  nilfs_sufile_do_cancel_free: segment 6533 must be clean

Usually a few hours later the file system gets corrupted:

  NILFS: bad btree node (blocknr=8748107): level = 0, flags = 0x0, nchildren = 0
  NILFS error (device sdc1): nilfs_bmap_last_key: broken bmap (inode number=114660)

The issue can be reproduced with a file system that is nearly full and
with the cleaner running, while some IO intensive task is running.
Although it is quite hard to reproduce.

This is what happens:

 1. The cleaner starts the segment construction
 2. nilfs_segctor_collect is called
 3. sc_stage is on NILFS_ST_SUFILE and segments are freed
 4. sc_stage is on NILFS_ST_DAT current segment is full
 5. nilfs_segctor_extend_segments is called, which
    allocates a new segment
 6. The new segment is one of the segments freed in step 3
 7. nilfs_sufile_cancel_freev is called and produces an error message
 8. Loop around and the collection starts again
 9. sc_stage is on NILFS_ST_SUFILE and segments are freed
    including the newly allocated segment, which will contain active
    data and can be allocated at a later time
10. A few hours later another segment construction allocates the
    segment and causes file system corruption

This can be prevented by simply reordering the statements.  If
nilfs_sufile_cancel_freev is called before nilfs_segctor_extend_segments
the freed segments are marked as dirty and cannot be allocated any more.

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Reviewed-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SELinux: Fix possible NULL pointer dereference in selinux_inode_permission()

commit 3dc91d4338d698ce77832985f9cb183d8eeaf6be upstream.

While running stress tests on adding and deleting ftrace instances I hit
this bug:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
  IP: selinux_inode_permission+0x85/0x160
  PGD 63681067 PUD 7ddbe067 PMD 0
  Oops: 0000 [#1] PREEMPT
  CPU: 0 PID: 5634 Comm: ftrace-test-mki Not tainted 3.13.0-rc4-test-00033-gd2a6dde-dirty #20
  Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
  task: ffff880078375800 ti: ffff88007ddb0000 task.ti: ffff88007ddb0000
  RIP: 0010:[<ffffffff812d8bc5>]  [<ffffffff812d8bc5>] selinux_inode_permission+0x85/0x160
  RSP: 0018:ffff88007ddb1c48  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000800000 RCX: ffff88006dd43840
  RDX: 0000000000000001 RSI: 0000000000000081 RDI: ffff88006ee46000
  RBP: ffff88007ddb1c88 R08: 0000000000000000 R09: ffff88007ddb1c54
  R10: 6e6576652f6f6f66 R11: 0000000000000003 R12: 0000000000000000
  R13: 0000000000000081 R14: ffff88006ee46000 R15: 0000000000000000
  FS:  00007f217b5b6700(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033^M
  CR2: 0000000000000020 CR3: 000000006a0fe000 CR4: 00000000000007f0
  Call Trace:
    security_inode_permission+0x1c/0x30
    __inode_permission+0x41/0xa0
    inode_permission+0x18/0x50
    link_path_walk+0x66/0x920
    path_openat+0xa6/0x6c0
    do_filp_open+0x43/0xa0
    do_sys_open+0x146/0x240
    SyS_open+0x1e/0x20
    system_call_fastpath+0x16/0x1b
  Code: 84 a1 00 00 00 81 e3 00 20 00 00 89 d8 83 c8 02 40 f6 c6 04 0f 45 d8 40 f6 c6 08 74 71 80 cf 02 49 8b 46 38 4c 8d 4d cc 45 31 c0 <0f> b7 50 20 8b 70 1c 48 8b 41 70 89 d9 8b 78 04 e8 36 cf ff ff
  RIP  selinux_inode_permission+0x85/0x160
  CR2: 0000000000000020

Investigating, I found that the inode->i_security was NULL, and the
dereference of it caused the oops.

in selinux_inode_permission():

isec = inode->i_security;

rc = avc_has_perm_noaudit(sid, isec->sid, isec->sclass, perms, 0, &avd);

Note, the crash came from stressing the deletion and reading of debugfs
files.  I was not able to recreate this via normal files.  But I'm not
sure they are safe.  It may just be that the race window is much harder
to hit.

What seems to have happened (and what I have traced), is the file is
being opened at the same time the file or directory is being deleted.
As the dentry and inode locks are not held during the path walk, nor is
the inodes ref counts being incremented, there is nothing saving these
structures from being discarded except for an rcu_read_lock().

The rcu_read_lock() protects against freeing of the inode, but it does
not protect freeing of the inode_security_struct.  Now if the freeing of
the i_security happens with a call_rcu(), and the i_security field of
the inode is not changed (it gets freed as the inode gets freed) then
there will be no issue here.  (Linus Torvalds suggested not setting the
field to NULL such that we do not need to check if it is NULL in the
permission check).

Note, this is a hack, but it fixes the problem at hand.  A real fix is
to restructure the destroy_inode() to call all the destructor handlers
from the RCU callback.  But that is a major job to do, and requires a
lot of work.  For now, we just band-aid this bug with this fix (it
works), and work on a more maintainable solution in the future.

Link: http://lkml.kernel.org/r/20140109101932.0508dec7@gandalf.local.home
Link: http://lkml.kernel.org/r/20140109182756.17abaaa8@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (coretemp) Fix truncated name of alarm attributes

commit 3f9aec7610b39521c7c69d754de7265f6994c194 upstream.

When the core number exceeds 9, the size of the buffer storing the
alarm attribute name is insufficient and the attribute name is
truncated. This causes libsensors to skip these attributes as the
truncated name is not recognized.

Reported-by: Andreas Hollmann <hollmann@in.tum.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory-failure.c: recheck PageHuge() after hugetlb page migrate successfully

commit a49ecbcd7b0d5a1cda7d60e03df402dd0ef76ac8 upstream.

After a successful hugetlb page migration by soft offline, the source
page will either be freed into hugepage_freelists or buddy(over-commit
page).  If page is in buddy, page_hstate(page) will be NULL.  It will
hit a NULL pointer dereference in dequeue_hwpoisoned_huge_page().

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
  IP: [<ffffffff81163761>] dequeue_hwpoisoned_huge_page+0x131/0x1d0
  PGD c23762067 PUD c24be2067 PMD 0
  Oops: 0000 [#1] SMP

So check PageHuge(page) after call migrate_pages() successfully.

[wujg: backport to 3.4:
 - adjust context
 - s/num_poisoned_pages/mce_bad_pages/]

Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Tested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/amd/ibs: Fix waking up from S3 for AMD family 10h

commit bee09ed91cacdbffdbcd3b05de8409c77ec9fcd6 upstream.

On AMD family 10h we see following error messages while waking up from
S3 for all non-boot CPUs leading to a failed IBS initialization:

 Enabling non-boot CPUs ...
 smpboot: Booting Node 0 Processor 1 APIC 0x1
 [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
 perf: IBS APIC setup failed on cpu #1
 process: Switch to broadcast mode on CPU1
 CPU1 is up
 ...
 ACPI: Waking up from system sleep state S3

Reason for this is that during suspend the LVT offset for the IBS
vector gets lost and needs to be reinialized while resuming.

The offset is read from the IBSCTL msr. On family 10h the offset needs
to be 1 as offset 0 is used for the MCE threshold interrupt, but
firmware assings it for IBS to 0 too. The kernel needs to reprogram
the vector. The msr is a readonly node msr, but a new value can be
written via pci config space access. The reinitialization is
implemented for family 10h in setup_ibs_ctl() which is forced during
IBS setup.

This patch fixes IBS setup after waking up from S3 by adding
resume/supend hooks for the boot cpu which does the offset
reinitialization.

Marking it as stable to let distros pick up this fix.

Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1389797849-5565-1-git-send-email-rric.net@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255_pci: fix for newer PCI-DIO48H

commit 0283f7a100882684ad32b768f9f1ad81658a0b92 upstream.

At some point, Measurement Computing / ComputerBoards redesigned the
PCI-DIO48H to use a PLX PCI interface chip instead of an AMCC chip.
This meant they had to put their hardware registers in the PCI BAR 2
region instead of PCI BAR 1.  Unfortunately, they kept the same PCI
device ID for the new design.  This means the driver recognizes the
newer cards, but doesn't work (and is likely to screw up the local
configuration registers of the PLX chip) because it's using the wrong
region.

Since  the PCI subvendor and subdevice IDs were both zero on the old
design, but are the same as the vendor and device on the new design, we
can tell the old design and new design apart easily enough.  Split the
existing entry for the PCI-DIO48H in `pci_8255_boards[]` into two new
entries, referenced by different entries in the PCI device ID table
`pci_8255_pci_table[]`.  Use the same board name for both entries.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368)

commit fda4e2e85589191b123d31cdc21fd33ee70f50fd upstream.

In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the
potential to corrupt kernel memory if userspace provides an address that
is at the end of a page.  This patches concerts those functions to use
kvm_write_guest_cached and kvm_read_guest_cached.  It also checks the
vapic_address specified by userspace during ioctl processing and returns
an error to userspace if the address is not a valid GPA.

This is generally not guest triggerable, because the required write is
done by firmware that runs before the guest.  Also, it only affects AMD
processors and oldish Intel that do not have the FlexPriority feature
(unless you disable FlexPriority, of course; then newer processors are
also affected).

Fixes: b93463aa59d6 ('KVM: Accelerated apic support')

Reported-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ lizf: backported to 3.4: based on Paolo's backport hints for <3.10 ]
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.77

sched: Guarantee new group-entities always have weight

commit 0ac9b1c21874d2490331233b3242085f8151e166 upstream.

Currently, group entity load-weights are initialized to zero. This
admits some races with respect to the first time they are re-weighted in
earlty use. ( Let g[x] denote the se for "g" on cpu "x". )

Suppose that we have root->a and that a enters a throttled state,
immediately followed by a[0]->t1 (the only task running on cpu[0])
blocking:

  put_prev_task(group_cfs_rq(a[0]), t1)
  put_prev_entity(..., t1)
  check_cfs_rq_runtime(group_cfs_rq(a[0]))
  throttle_cfs_rq(group_cfs_rq(a[0]))

Then, before unthrottling occurs, let a[0]->b[0]->t2 wake for the first
time:

  enqueue_task_fair(rq[0], t2)
  enqueue_entity(group_cfs_rq(b[0]), t2)
  enqueue_entity_load_avg(group_cfs_rq(b[0]), t2)
  account_entity_enqueue(group_cfs_ra(b[0]), t2)
  update_cfs_shares(group_cfs_rq(b[0]))
  < skipped because b is part of a throttled hierarchy >
  enqueue_entity(group_cfs_rq(a[0]), b[0])
  ...

We now have b[0] enqueued, yet group_cfs_rq(a[0])->load.weight == 0
which violates invariants in several code-paths. Eliminate the
possibility of this by initializing group entity weight.

Signed-off-by: Paul Turner <pjt@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131016181627.22647.47543.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: Fix hrtimer_cancel()/rq->lock deadlock

commit 927b54fccbf04207ec92f669dce6806848cbec7d upstream.

__start_cfs_bandwidth calls hrtimer_cancel while holding rq->lock,
waiting for the hrtimer to finish. However, if sched_cfs_period_timer
runs for another loop iteration, the hrtimer can attempt to take
rq->lock, resulting in deadlock.

Fix this by ensuring that cfs_b->timer_active is cleared only if the
_latest_ call to do_sched_cfs_period_timer is returning as idle. Then
__start_cfs_bandwidth can just call hrtimer_try_to_cancel and wait for
that to succeed or timer_active == 1.

Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181622.22647.16643.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining

commit db06e78cc13d70f10877e0557becc88ab3ad2be8 upstream.

hrtimer_expires_remaining does not take internal hrtimer locks and thus
must be guarded against concurrent __hrtimer_start_range_ns (but
returning HRTIMER_RESTART is safe). Use cfs_b->lock to make it safe.

Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181617.22647.73829.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: Fix race on toggling cfs_bandwidth_used

commit 1ee14e6c8cddeeb8a490d7b54cd9016e4bb900b4 upstream.

When we transition cfs_bandwidth_used to false, any currently
throttled groups will incorrectly return false from cfs_rq_throttled.
While tg_set_cfs_bandwidth will unthrottle them eventually, currently
running code (including at least dequeue_task_fair and
distribute_cfs_runtime) will cause errors.

Fix this by turning off cfs_bandwidth_used only after unthrottling all
cfs_rqs.

Tested: toggle bandwidth back and forth on a loaded cgroup. Caused
crashes in minutes without the patch, hasn't crashed with it.

Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181611.22647.80365.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, fpu, amd: Clear exceptions in AMD FXSAVE workaround

commit 26bef1318adc1b3a530ecc807ef99346db2aa8b0 upstream.

Before we do an EMMS in the AMD FXSAVE information leak workaround we
need to clear any pending exceptions, otherwise we trap with a
floating-point exception inside this code.

Reported-by: halfdog <me@halfdog.net>
Tested-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/CA%2B55aFxQnY_PCG_n4=0w-VG=YLXL-yr7oMxyy0WU2gCBAf3ydg@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: shmobile: mackerel: Fix coherent DMA mask

commit b6328a6b7ba57fc84c38248f6f0e387e1170f1a8 upstream.

Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better
handing of DMA masks for coherent allocations") added an additional
check to the coherent DMA mask that results in an error when the mask is
larger than what dma_addr_t can address.

Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix
the problem.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: fix "bad mode in ... handler" message for undefined instructions

commit 29c350bf28da333e41e30497b649fe335712a2ab upstream.

The array was missing the final entry for the undefined instruction
exception handler; this commit adds it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: use spin_lock_bh() in br_multicast_set_hash_max

[ Upstream commit fe0d692bbc645786bce1a98439e548ae619269f5 ]

br_multicast_set_hash_max() is called from process context in
net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function.

br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock),
which can deadlock the CPU if a softirq that also tries to take the
same lock interrupts br_multicast_set_hash_max() while the lock is
held .  This can happen quite easily when any of the bridge multicast
timers expire, which try to take the same lock.

The fix here is to use spin_lock_bh(), preventing other softirqs from
executing on this CPU.

Steps to reproduce:

1. Create a bridge with several interfaces (I used 4).
2. Set the "multicast query interval" to a low number, like 2.
3. Enable the bridge as a multicast querier.
4. Repeatedly set the bridge hash_max parameter via sysfs.

  # brctl addbr br0
  # brctl addif br0 eth1 eth2 eth3 eth4
  # brctl setmcqi br0 2
  # brctl setmcquerier br0 1

  # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done

Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: llc: fix use after free in llc_ui_recvmsg

[ Upstream commit 4d231b76eef6c4a6bd9c96769e191517765942cb ]

While commit 30a584d944fb fixes datagram interface in LLC, a use
after free bug has been introduced for SOCK_STREAM sockets that do
not make use of MSG_PEEK.

The flow is as follow ...

  if (!(flags & MSG_PEEK)) {
    ...
    sk_eat_skb(sk, skb, false);
    ...
  }
  ...
  if (used + offset < skb->len)
    continue;

... where sk_eat_skb() calls __kfree_skb(). Therefore, cache
original length and work on skb_len to check partial reads.

Fixes: 30a584d944fb ("[LLX]: SOCK_DGRAM interface fixes")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vlan: Fix header ops passthru when doing TX VLAN offload.

[ Upstream commit 2205369a314e12fcec4781cc73ac9c08fc2b47de ]

When the vlan code detects that the real device can do TX VLAN offloads
in hardware, it tries to arrange for the real device's header_ops to
be invoked directly.

But it does so illegally, by simply hooking the real device's
header_ops up to the VLAN device.

This doesn't work because we will end up invoking a set of header_ops
routines which expect a device type which matches the real device, but
will see a VLAN device instead.

Fix this by providing a pass-thru set of header_ops which will arrange
to pass the proper real device instead.

To facilitate this add a dev_rebuild_header().  There are
implementations which provide a ->cache and ->create but not a
->rebuild (f.e. PLIP).  So we need a helper function just like
dev_hard_header() to avoid crashes.

Use this helper in the one existing place where the
header_ops->rebuild was being invoked, the neighbour code.

With lots of help from Florian Westphal.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: rose: restore old recvmsg behavior

[ Upstream commit f81152e35001e91997ec74a7b4e040e6ab0acccf ]

recvmsg handler in net/rose/af_rose.c performs size-check ->msg_namelen.

After commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c
(net: rework recvmsg handler msg_name and msg_namelen logic), we now
always take the else branch due to namelen being initialized to 0.

Digging in netdev-vger-cvs git repo shows that msg_namelen was
initialized with a fixed-size since at least 1995, so the else branch
was never taken.

Compile tested only.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rds: prevent dereference of a NULL device

[ Upstream commit c2349758acf1874e4c2b93fe41d072336f1a31d0 ]

Binding might result in a NULL device, which is dereferenced
causing this BUG:

[ 1317.260548] BUG: unable to handle kernel NULL pointer dereference at 000000000000097
4
[ 1317.261847] IP: [<ffffffff84225f52>] rds_ib_laddr_check+0x82/0x110
[ 1317.263315] PGD 418bcb067 PUD 3ceb21067 PMD 0
[ 1317.263502] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 1317.264179] Dumping ftrace buffer:
[ 1317.264774]    (ftrace buffer empty)
[ 1317.265220] Modules linked in:
[ 1317.265824] CPU: 4 PID: 836 Comm: trinity-child46 Tainted: G        W    3.13.0-rc4-
next-20131218-sasha-00013-g2cebb9b-dirty #4159
[ 1317.267415] task: ffff8803ddf33000 ti: ffff8803cd31a000 task.ti: ffff8803cd31a000
[ 1317.268399] RIP: 0010:[<ffffffff84225f52>]  [<ffffffff84225f52>] rds_ib_laddr_check+
0x82/0x110
[ 1317.269670] RSP: 0000:ffff8803cd31bdf8  EFLAGS: 00010246
[ 1317.270230] RAX: 0000000000000000 RBX: ffff88020b0dd388 RCX: 0000000000000000
[ 1317.270230] RDX: ffffffff8439822e RSI: 00000000000c000a RDI: 0000000000000286
[ 1317.270230] RBP: ffff8803cd31be38 R08: 0000000000000000 R09: 0000000000000000
[ 1317.270230] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[ 1317.270230] R13: 0000000054086700 R14: 0000000000a25de0 R15: 0000000000000031
[ 1317.270230] FS:  00007ff40251d700(0000) GS:ffff88022e200000(0000) knlGS:000000000000
0000
[ 1317.270230] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1317.270230] CR2: 0000000000000974 CR3: 00000003cd478000 CR4: 00000000000006e0
[ 1317.270230] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1317.270230] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602
[ 1317.270230] Stack:
[ 1317.270230]  0000000054086700 5408670000a25de0 5408670000000002 0000000000000000
[ 1317.270230]  ffffffff84223542 00000000ea54c767 0000000000000000 ffffffff86d26160
[ 1317.270230]  ffff8803cd31be68 ffffffff84223556 ffff8803cd31beb8 ffff8800c6765280
[ 1317.270230] Call Trace:
[ 1317.270230]  [<ffffffff84223542>] ? rds_trans_get_preferred+0x42/0xa0
[ 1317.270230]  [<ffffffff84223556>] rds_trans_get_preferred+0x56/0xa0
[ 1317.270230]  [<ffffffff8421c9c3>] rds_bind+0x73/0xf0
[ 1317.270230]  [<ffffffff83e4ce62>] SYSC_bind+0x92/0xf0
[ 1317.270230]  [<ffffffff812493f8>] ? context_tracking_user_exit+0xb8/0x1d0
[ 1317.270230]  [<ffffffff8119313d>] ? trace_hardirqs_on+0xd/0x10
[ 1317.270230]  [<ffffffff8107a852>] ? syscall_trace_enter+0x32/0x290
[ 1317.270230]  [<ffffffff83e4cece>] SyS_bind+0xe/0x10
[ 1317.270230]  [<ffffffff843a6ad0>] tracesys+0xdd/0xe2
[ 1317.270230] Code: 00 8b 45 cc 48 8d 75 d0 48 c7 45 d8 00 00 00 00 66 c7 45 d0 02 00
89 45 d4 48 89 df e8 78 49 76 ff 41 89 c4 85 c0 75 0c 48 8b 03 <80> b8 74 09 00 00 01 7
4 06 41 bc 9d ff ff ff f6 05 2a b6 c2 02
[ 1317.270230] RIP  [<ffffffff84225f52>] rds_ib_laddr_check+0x82/0x110
[ 1317.270230]  RSP <ffff8803cd31bdf8>
[ 1317.270230] CR2: 0000000000000974

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hamradio/yam: fix info leak in ioctl

[ Upstream commit 8e3fbf870481eb53b2d3a322d1fc395ad8b367ed ]

The yam_ioctl() code fails to initialise the cmd field
of the struct yamdrv_ioctl_cfg. Add an explicit memset(0)
before filling the structure to avoid the 4-byte info leak.

Signed-off-by: Salva Peiró <speiro@ai2.upv.es>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/hamradio: Integer overflow in hdlcdrv_ioctl()

[ Upstream commit e9db5c21d3646a6454fcd04938dd215ac3ab620a ]

The local variable 'bi' comes from userspace. If userspace passed a
large number to 'bi.data.calibrate', there would be an integer overflow
in the following line:
s->hdlctx.calibrate = bi.data.calibrate * s->par.bitrate / 16;

Signed-off-by: Wenliang Fan <fanwlexca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: inet_diag: zero out uninitialized idiag_{src,dst} fields

[ Upstream commit b1aac815c0891fe4a55a6b0b715910142227700f ]

Jakub reported while working with nlmon netlink sniffer that parts of
the inet_diag_sockid are not initialized when r->idiag_family != AF_INET6.
That is, fields of r->id.idiag_src[1 ... 3], r->id.idiag_dst[1 ... 3].

In fact, it seems that we can leak 6 * sizeof(u32) byte of kernel [slab]
memory through this. At least, in udp_dump_one(), we allocate a skb in ...

  rep = nlmsg_new(sizeof(struct inet_diag_msg) + ..., GFP_KERNEL);

... and then pass that to inet_sk_diag_fill() that puts the whole struct
inet_diag_msg into the skb, where we only fill out r->id.idiag_src[0],
r->id.idiag_dst[0] and leave the rest untouched:

  r->id.idiag_src[0] = inet->inet_rcv_saddr;
  r->id.idiag_dst[0] = inet->inet_daddr;

struct inet_diag_msg embeds struct inet_diag_sockid that is correctly /
fully filled out in IPv6 case, but for IPv4 not.

So just zero them out by using plain memset (for this little amount of
bytes it's probably not worth the extra check for idiag_family == AF_INET).

Similarly, fix also other places where we fill that out.

Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: unix: allow bind to fail on mutex lock

[ Upstream commit 37ab4fa7844a044dc21fde45e2a0fc2f3c3b6490 ]

This is similar to the set_peek_off patch where calling bind while the
socket is stuck in unix_dgram_recvmsg() will block and cause a hung task
spew after a while.

This is also the last place that did a straightforward mutex_lock(), so
there shouldn't be any more of these patches.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netvsc: don't flush peers notifying work during setting mtu

[ Upstream commit 50dc875f2e6e2e04aed3b3033eb0ac99192d6d02 ]

There's a possible deadlock if we flush the peers notifying work during setting
mtu:

[   22.991149] ======================================================
[   22.991173] [ INFO: possible circular locking dependency detected ]
[   22.991198] 3.10.0-54.0.1.el7.x86_64.debug #1 Not tainted
[   22.991219] -------------------------------------------------------
[   22.991243] ip/974 is trying to acquire lock:
[   22.991261]  ((&(&net_device_ctx->dwork)->work)){+.+.+.}, at: [<ffffffff8108af95>] flush_work+0x5/0x2e0
[   22.991307]
but task is already holding lock:
[   22.991330]  (rtnl_mutex){+.+.+.}, at: [<ffffffff81539deb>] rtnetlink_rcv+0x1b/0x40
[   22.991367]
which lock already depends on the new lock.

[   22.991398]
the existing dependency chain (in reverse order) is:
[   22.991426]
-> #1 (rtnl_mutex){+.+.+.}:
[   22.991449]        [<ffffffff810dfdd9>] __lock_acquire+0xb19/0x1260
[   22.991477]        [<ffffffff810e0d12>] lock_acquire+0xa2/0x1f0
[   22.991501]        [<ffffffff81673659>] mutex_lock_nested+0x89/0x4f0
[   22.991529]        [<ffffffff815392b7>] rtnl_lock+0x17/0x20
[   22.991552]        [<ffffffff815230b2>] netdev_notify_peers+0x12/0x30
[   22.991579]        [<ffffffffa0340212>] netvsc_send_garp+0x22/0x30 [hv_netvsc]
[   22.991610]        [<ffffffff8108d251>] process_one_work+0x211/0x6e0
[   22.991637]        [<ffffffff8108d83b>] worker_thread+0x11b/0x3a0
[   22.991663]        [<ffffffff81095e5d>] kthread+0xed/0x100
[   22.991686]        [<ffffffff81681c6c>] ret_from_fork+0x7c/0xb0
[   22.991715]
-> #0 ((&(&net_device_ctx->dwork)->work)){+.+.+.}:
[   22.991715]        [<ffffffff810de817>] check_prevs_add+0x967/0x970
[   22.991715]        [<ffffffff810dfdd9>] __lock_acquire+0xb19/0x1260
[   22.991715]        [<ffffffff810e0d12>] lock_acquire+0xa2/0x1f0
[   22.991715]        [<ffffffff8108afde>] flush_work+0x4e/0x2e0
[   22.991715]        [<ffffffff8108e1b5>] __cancel_work_timer+0x95/0x130
[   22.991715]        [<ffffffff8108e303>] cancel_delayed_work_sync+0x13/0x20
[   22.991715]        [<ffffffffa03404e4>] netvsc_change_mtu+0x84/0x200 [hv_netvsc]
[   22.991715]        [<ffffffff815233d4>] dev_set_mtu+0x34/0x80
[   22.991715]        [<ffffffff8153bc2a>] do_setlink+0x23a/0xa00
[   22.991715]        [<ffffffff8153d054>] rtnl_newlink+0x394/0x5e0
[   22.991715]        [<ffffffff81539eac>] rtnetlink_rcv_msg+0x9c/0x260
[   22.991715]        [<ffffffff8155cdd9>] netlink_rcv_skb+0xa9/0xc0
[   22.991715]        [<ffffffff81539dfa>] rtnetlink_rcv+0x2a/0x40
[   22.991715]        [<ffffffff8155c41d>] netlink_unicast+0xdd/0x190
[   22.991715]        [<ffffffff8155c807>] netlink_sendmsg+0x337/0x750
[   22.991715]        [<ffffffff8150d219>] sock_sendmsg+0x99/0xd0
[   22.991715]        [<ffffffff8150d63e>] ___sys_sendmsg+0x39e/0x3b0
[   22.991715]        [<ffffffff8150eba2>] __sys_sendmsg+0x42/0x80
[   22.991715]        [<ffffffff8150ebf2>] SyS_sendmsg+0x12/0x20
[   22.991715]        [<ffffffff81681d19>] system_call_fastpath+0x16/0x1b

This is because we hold the rtnl_lock() before ndo_change_mtu() and try to flush
the work in netvsc_change_mtu(), in the mean time, netdev_notify_peers() may be
called from worker and also trying to hold the rtnl_lock. This will lead the
flush won't succeed forever. Solve this by not canceling and flushing the work,
this is safe because the transmission done by NETDEV_NOTIFY_PEERS was
synchronized with the netif_tx_disable() called by netvsc_change_mtu().

Reported-by: Yaju Cao <yacao@redhat.com>
Tested-by: Yaju Cao <yacao@redhat.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0

[ Upstream commit 388d3335575f4c056dcf7138a30f1454e2145cd8 ]

The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120)
uninitialized. From power on reset this register may have garbage in it. The
Register Base Address register defines the device local address of a
register. The data pointed to by this location is read or written using
the Register Data register (PCI config offset 128). When REG_BASE_ADDR has
garbage any read or write of Register Data Register (PCI 128) will cause the
PCI bus to lock up. The TCO watchdog will fire and bring down the system.

Signed-off-by: Nat Gurumoorthy <natg@google.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: unix: allow set_peek_off to fail

[ Upstream commit 12663bfc97c8b3fdb292428105dd92d563164050 ]

unix_dgram_recvmsg() will hold the readlock of the socket until recv
is complete.

In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until
unix_dgram_recvmsg() will complete (which can take a while) without allowing
us to break out of it, triggering a hung task spew.

Instead, allow set_peek_off to fail, this way userspace will not hang.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: drop_monitor: fix the value of maxattr

[ Upstream commit d323e92cc3f4edd943610557c9ea1bb4bb5056e8 ]

maxattr in genl_family should be used to save the max attribute
type, but not the max command type. Drop monitor doesn't support
any attributes, so we should leave it as zero.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: don't count addrconf generated routes against gc limit

[ Upstream commit a3300ef4bbb1f1e33ff0400e1e6cf7733d988f4f ]

Brett Ciphery reported that new ipv6 addresses failed to get installed
because the addrconf generated dsts where counted against the dst gc
limit. We don't need to count those routes like we currently don't count
administratively added routes.

Because the max_addresses check enforces a limit on unbounded address
generation first in case someone plays with router advertisments, we
are still safe here.

Reported-by: Brett Ciphery <brett.ciphery@windriver.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvtap: signal truncated packets

[ Upstream commit ce232ce01d61b184202bb185103d119820e1260c ]

macvtap_put_user() never return a value grater than iov length, this in fact
bypasses the truncated checking in macvtap_recvmsg(). Fix this by always
returning the size of packet plus the possible vlan header to let the trunca
checking work.

Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: update file current position

[ Upstream commit d0b7da8afa079ffe018ab3e92879b7138977fc8f ]

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvtap: update file current position

[ Upstream commit e6ebc7f16ca1434a334647aa56399c546be4e64b ]

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvtap: Do not double-count received packets

[ Upstream commit 006da7b07bc4d3a7ffabad17cf639eec6849c9dc ]

Currently macvlan will count received packets after calling each
vlans receive handler.   Macvtap attempts to count the packet
yet again when the user reads the packet from the tap socket.
This code doesn't do this consistently either.  Remove the
counting from macvtap and let only macvlan count received
packets.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rds: prevent BUG_ON triggered on congestion update to loopback

[ Upstream commit 18fc25c94eadc52a42c025125af24657a93638c0 ]

After congestion update on a local connection, when rds_ib_xmit returns
less bytes than that are there in the message, rds_send_xmit calls
back rds_ib_xmit with an offset that causes BUG_ON(off & RDS_FRAG_SIZE)
to trigger.

For a 4Kb PAGE_SIZE rds_ib_xmit returns min(8240,4096)=4096 when actually
the message contains 8240 bytes. rds_send_xmit thinks there is more to send
and calls rds_ib_xmit again with a data offset "off" of 4096-48(rds header)
=4048 bytes thus hitting the BUG_ON(off & RDS_FRAG_SIZE) [RDS_FRAG_SIZE=4k].

The commit 6094628bfd94323fc1cea05ec2c6affd98c18f7f
"rds: prevent BUG_ON triggering on congestion map updates" introduced
this regression. That change was addressing the triggering of a different
BUG_ON in rds_send_xmit() on PowerPC architecture with 64Kbytes PAGE_SIZE:
  BUG_ON(ret != 0 &&
      conn->c_xmit_sg == rm->data.op_nents);
This was the sequence it was going through:
(rds_ib_xmit)
/* Do not send cong updates to IB loopback */
if (conn->c_loopback
   && rm->m_inc.i_hdr.h_flags & RDS_FLAG_CONG_BITMAP) {
   rds_cong_map_updated(conn->c_fcong, ~(u64) 0);
     return sizeof(struct rds_header) + RDS_CONG_MAP_BYTES;
}
rds_ib_xmit returns 8240
rds_send_xmit:
  c_xmit_data_off = 0 + 8240 - 48 (rds header accounted only the first time)
     = 8192
  c_xmit_data_off < 65536 (sg->length), so calls rds_ib_xmit again
rds_ib_xmit returns 8240
rds_send_xmit:
  c_xmit_data_off = 8192 + 8240 = 16432, calls rds_ib_xmit again
  and so on (c_xmit_data_off 24672,32912,41152,49392,57632)
rds_ib_xmit returns 8240
On this iteration this sequence causes the BUG_ON in rds_send_xmit:
    while (ret) {
     tmp = min_t(int, ret, sg->length - conn->c_xmit_data_off);
     [tmp = 65536 - 57632 = 7904]
     conn->c_xmit_data_off += tmp;
     [c_xmit_data_off = 57632 + 7904 = 65536]
     ret -= tmp;
     [ret = 8240 - 7904 = 336]
     if (conn->c_xmit_data_off == sg->length) {
     conn->c_xmit_data_off = 0;
     sg++;
     conn->c_xmit_sg++;
     BUG_ON(ret != 0 &&
     conn->c_xmit_sg == rm->data.op_nents);
     [c_xmit_sg = 1, rm->data.op_nents = 1]

What the current fix does:
Since the congestion update over loopback is not actually transmitted
as a message, all that rds_ib_xmit needs to do is let the caller think
the full message has been transmitted and not return partial bytes.
It will return 8240 (RDS_CONG_MAP_BYTES+48) when PAGE_SIZE is 4Kb.
And 64Kb+48 when page size is 64Kb.

Reported-by: Josh Hunt <joshhunt00@gmail.com>
Tested-by: Honggang Li <honli@redhat.com>
Acked-by: Bang Nguyen <bang.nguyen@oracle.com>
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: do not pretend FRAGLIST support

[ Upstream commit 28e24c62ab3062e965ef1b3bcc244d50aee7fa85 ]

Few network drivers really supports frag_list : virtual drivers.

Some drivers wrongly advertise NETIF_F_FRAGLIST feature.

If skb with a frag_list is given to them, packet on the wire will be
corrupt.

Remove this flag, as core networking stack will make sure to
provide packets that can be sent without corruption.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: Anirudha Sarangi <anirudh@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.76

hwmon: (w83l768ng) Fix fan speed control range

commit 33a7ab91d509fa33b4bcd3ce0038cc80298050da upstream.

The W83L786NG stores the fan speed on 4 bits while the sysfs interface
uses a 0-255 range. Thus the driver should scale the user input down
to map it to the device range, and scale up the value read from the
device before presenting it to the user. The reserved register nibble
should be left unchanged.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute()

commit c0828e50485932b7e019df377a6b0a8d1ebd3080 upstream.

Due to difficulty in arriving at the proper security label for
TCP SYN-ACK packets in selinux_ip_postroute(), we need to check packets
while/before they are undergoing XFRM transforms instead of waiting
until afterwards so that we can determine the correct security label.

Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: look for IPsec labels on both inbound and outbound packets

commit 817eff718dca4e54d5721211ddde0914428fbb7c upstream.

Previously selinux_skb_peerlbl_sid() would only check for labeled
IPsec security labels on inbound packets, this patch enables it to
check both inbound and outbound traffic for labeled IPsec security
labels.

Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: always link in helper functions extracted from libgcc

commit 84ed8a99058e61567f495cc43118344261641c5f upstream.

E.g. landisk_defconfig, which has CONFIG_NTFS_FS=m:

  ERROR: "__ashrdi3" [fs/ntfs/ntfs.ko] undefined!

For "lib-y", if no symbols in a compilation unit are referenced by other
units, the compilation unit will not be included in vmlinux.  This
breaks modules that do reference those symbols.

Use "obj-y" instead to fix this.

http://kisskb.ellerman.id.au/kisskb/buildresult/8838077/

This doesn't fix all cases. There are others, e.g. udivsi3.
This is also not limited to sh, many architectures handle this in the
same way.

A simple solution is to unconditionally include all helper functions.
A more complex solution is to make the choice of "lib-y" or "obj-y" depend
on CONFIG_MODULES:

  obj-$(CONFIG_MODULES) += ...
  lib-y($CONFIG_MODULES) += ...

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Tested-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched: Avoid throttle_cfs_rq() racing with period_timer stopping

commit f9f9ffc237dd924f048204e8799da74f9ecf40cf upstream.

throttle_cfs_rq() doesn't check to make sure that period_timer is running,
and while update_curr/assign_cfs_runtime does, a concurrently running
period_timer on another cpu could cancel itself between this cpu's
update_curr and throttle_cfs_rq(). If there are no other cfs_rqs running
in the tg to restart the timer, this causes the cfs_rq to be stranded
forever.

Fix this by calling __start_cfs_bandwidth() in throttle if the timer is
inactive.

(Also add some sched_debug lines for cfs_bandwidth.)

Tested: make a run/sleep task in a cgroup, loop switching the cgroup
between 1ms/100ms quota and unlimited, checking for timer_active=0 and
throttled=1 as a failure. With the throttle_cfs_rq() change commented out
this fails, with the full patch it passes.

Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181632.22647.84174.stgit@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: msm: Fix irq mask/unmask by writing bits instead of numbers

commit 4cc629b7a20945ce35628179180329b6bc9e552b upstream.

We should be writing bits here but instead we're writing the
numbers that correspond to the bits we want to write. Fix it by
wrapping the numbers in the BIT() macro. This fixes gpios acting
as interrupts.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: don't BUG but return ENOSPC if a handle runs out of space

commit f6c07cad081ba222d63623d913aafba5586c1d2c upstream.

If a handle runs out of space, we currently stop the kernel with a BUG
in jbd2_journal_dirty_metadata().  This makes it hard to figure out
what might be going on.  So return an error of ENOSPC, so we can let
the file system layer figure out what is going on, to make it more
likely we can get useful debugging information).  This should make it
easier to debug problems such as the one which was reported by:

    https://bugzilla.kernel.org/show_bug.cgi?id=44731

The only two callers of this function are ext4_handle_dirty_metadata()
and ocfs2_journal_dirty().  The ocfs2 function will trigger a
BUG_ON(), which means there will be no change in behavior.  The ext4
function will call ext4_error_inode() which will print the useful
debugging information and then handle the situation using ext4's error
handling mechanisms (i.e., which might mean halting the kernel or
remounting the file system read-only).

Also, since both file systems already call WARN_ON(), drop the WARN_ON
from jbd2_journal_dirty_metadata() to avoid two stack traces from
being displayed.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: ocfs2-devel@oss.oracle.com
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GFS2: Fix incorrect invalidation for DIO/buffered I/O

commit dfd11184d894cd0a92397b25cac18831a1a6a5bc upstream.

In patch 209806aba9d540dde3db0a5ce72307f85f33468f we allowed
local deferred locks to be granted against a cached exclusive
lock. That opened up a corner case which this patch now
fixes.

The solution to the problem is to check whether we have cached
pages each time we do direct I/O and if so to unmap, flush
and invalidate those pages. Since the glock state machine
normally does that for us, mostly the code will be a no-op.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GFS2: don't hold s_umount over blkdev_put

commit dfe5b9ad83a63180f358b27d1018649a27b394a9 upstream.

This is a GFS2 version of Tejun's patch:
4f331f01b9c43bf001d3ffee578a97a1e0633eac
vfs: don't hold s_umount over close_bdev_exclusive() call

In this case its blkdev_put itself that is the issue and this
patch uses the same solution of dropping and retaking s_umount.

Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: allocate absinfo data when setting ABS capability

commit 28a2a2e1aedbe2d8b2301e6e0e4e63f6e4177aca upstream.

We need to make sure we allocate absinfo data when we are setting one of
EV_ABS/ABS_XXX capabilities, otherwise we may bomb when we try to emit this
event.

Rested-by: Paul Cercueil <pcercuei@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: check for pte NULL pointer in __page_check_address()

commit 98398c32f6687ee1e1f3ae084effb4b75adb0747 upstream.

In __page_check_address(), if address's pud is not present,
huge_pte_offset() will return NULL, we should check the return value.

Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: qiuxishi <qiuxishi@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: pci: Fix oops on driver unload

commit 9278db6279e28d4d433bc8a848e10b4ece8793ed upstream.

On Fedora systems, unloading rtl8192ce causes an oops. This patch fixes the
problem reported at https://bugzilla.redhat.com/show_bug.cgi?id=852761.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

radiotap: fix bitmap-end-finding buffer overrun

commit bd02cd2549cfcdfc57cb5ce57ffc3feb94f70575 upstream.

Evan Huus found (by fuzzing in wireshark) that the radiotap
iterator code can access beyond the length of the buffer if
the first bitmap claims an extension but then there's no
data at all. Fix this.

Reported-by: Evan Huus <eapache@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8

commit 87809942d3fa60bafb7a58d0bdb1c79e90a6821d upstream.

We've received multiple reports in Fedora via (BZ 907193)
that the Seagate Momentus SpinPoint M8 errors out when enabling AA:
[    2.555905] ata2.00: failed to enable AA (error_mask=0x1)
[    2.568482] ata2.00: failed to enable AA (error_mask=0x1)

Add the ATA_HORKAGE_BROKEN_FPDMA_AA for this specific harddisk.

Reported-by: Nicholas <arealityfarbetween@googlemail.com>
Signed-off-by: Michele Baldessari <michele@acksyn.org>
Tested-by: Nicholas <arealityfarbetween@googlemail.com>
Acked-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpupower: Fix segfault due to incorrect getopt_long arugments

commit f447ef4a56dee4b68a91460bcdfe06b5011085f2 upstream.

If a user calls 'cpupower set --perf-bias 15', the process will end with
a SIGSEGV in libc because cpupower-set passes a NULL optarg to the atoi
call.  This is because the getopt_long structure currently has all of
the options as having an optional_argument when they really have a
required argument.  We change the structure to use required_argument to
match the short options and it resolves the issue.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1000439

Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Align p_end

commit 286e4f90a72c0b0621dde0294af6ed4b0baddabb upstream.

p_end is an 8 byte value embedded in the text section. This means it
is only 4 byte aligned when it should be 8 byte aligned. Fix this
by adding an explicit alignment.

This fixes an issue where POWER7 little endian builds with
CONFIG_RELOCATABLE=y fail to boot.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix bad stack check in exception entry

commit 90ff5d688e61f49f23545ffab6228bd7e87e6dc7 upstream.

In EXCEPTION_PROLOG_COMMON() we check to see if the stack pointer (r1)
is valid when coming from the kernel.  If it's not valid, we die but
with a nice oops message.

Currently we allocate a stack frame (subtract INT_FRAME_SIZE) before we
check to see if the stack pointer is negative.  Unfortunately, this
won't detect a bad stack where r1 is less than INT_FRAME_SIZE.

This patch fixes the check to compare the modified r1 with
-INT_FRAME_SIZE.  With this, bad kernel stack pointers (including NULL
pointers) are correctly detected again.

Kudos to Paulus for finding this.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k_htc: properly set MAC address and BSSID mask

commit 657eb17d87852c42b55c4b06d5425baa08b2ddb3 upstream.

Pick the MAC address of the first virtual interface as the new hardware MAC
address. Set BSSID mask according to this MAC address. This fixes CVE-2013-4579.

Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Fix interrupt handling for the AR9002 family

commit 73f0b56a1ff64e7fb6c3a62088804bab93bcedc2 upstream.

This patch adds a driver workaround for a HW issue.

A race condition in the HW results in missing interrupts,
which can be avoided by a read/write with the ISR register.
All chips in the AR9002 series are affected by this bug - AR9003
and above do not have this problem.

Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm9601: work around tx fifo sync issue on dm962x

commit 4263c86dca5198da6bd3ad826d0b2304fbe25776 upstream.

Certain dm962x revisions contain an bug, where if a USB bulk transfer retry
(E.G. if bulk crc mismatch) happens right after a transfer with odd or
maxpacket length, the internal tx hardware fifo gets out of sync causing
the interface to stop working.

Work around it by adding up to 3 bytes of padding to ensure this situation
cannot trigger.

This workaround also means we never pass multiple-of-maxpacket size skb's
to usbnet, so the length adjustment to handle usbnet's padding of those can
be removed.

Reported-by: Joseph Chang <joseph_chang@davicom.com.tw>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm9601: fix reception of full size ethernet frames on dm9620/dm9621a

commit 407900cfb54bdb2cfa228010b6697305f66b2948 upstream.

dm9620/dm9621a require room for 4 byte padding even in dm9601 (3 byte
header) mode.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: Avoid data inconsistency due to d-cache aliasing in readpage()

commit 56f91aad69444d650237295f68c195b74d888d95 upstream.

If the length of data to be read in readpage() is exactly
PAGE_CACHE_SIZE, the original code does not flush d-cache
for data consistency after finishing reading. This patches fixes
this.

Signed-off-by: Li Wang <liwang@ubuntukylin.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: 0x9649 is SUMO2 not SUMO

commit d00adcc8ae9e22eca9d8af5f66c59ad9a74c90ec upstream.

Fixes rendering corruption due to incorrect
gfx configuration.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=63599

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix asic gfx values for scrapper asics

commit e2f6c88fb903e123edfd1106b0b8310d5117f774 upstream.

Fixes gfx corruption on certain TN/RL parts.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=60389

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_dma: mark broken

commit 77873803363c9e831fc1d1e6895c084279090c22 upstream.

net_dma can cause data to be copied to a stale mapping if a
copy-on-write fault occurs during dma.  The application sees missing
data.

The following trace is triggered by modifying the kernel to WARN if it
ever triggers copy-on-write on a page that is undergoing dma:

 WARNING: CPU: 24 PID: 2529 at lib/dma-debug.c:485 debug_dma_assert_idle+0xd2/0x120()
 ioatdma 0000:00:04.0: DMA-API: cpu touching an active dma mapped page [pfn=0x16bcd9]
 Modules linked in: iTCO_wdt iTCO_vendor_support ioatdma lpc_ich pcspkr dca
 CPU: 24 PID: 2529 Comm: linbug Tainted: G        W    3.13.0-rc1+ #353
  00000000000001e5 ffff88016f45f688 ffffffff81751041 ffff88017ab0ef70
  ffff88016f45f6d8 ffff88016f45f6c8 ffffffff8104ed9c ffffffff810f3646
  ffff8801768f4840 0000000000000282 ffff88016f6cca10 00007fa2bb699349
 Call Trace:
  [<ffffffff81751041>] dump_stack+0x46/0x58
  [<ffffffff8104ed9c>] warn_slowpath_common+0x8c/0xc0
  [<ffffffff810f3646>] ? ftrace_pid_func+0x26/0x30
  [<ffffffff8104ee86>] warn_slowpath_fmt+0x46/0x50
  [<ffffffff8139c062>] debug_dma_assert_idle+0xd2/0x120
  [<ffffffff81154a40>] do_wp_page+0xd0/0x790
  [<ffffffff811582ac>] handle_mm_fault+0x51c/0xde0
  [<ffffffff813830b9>] ? copy_user_enhanced_fast_string+0x9/0x20
  [<ffffffff8175fc2c>] __do_page_fault+0x19c/0x530
  [<ffffffff8175c196>] ? _raw_spin_lock_bh+0x16/0x40
  [<ffffffff810f3539>] ? trace_clock_local+0x9/0x10
  [<ffffffff810fa1f4>] ? rb_reserve_next_event+0x64/0x310
  [<ffffffffa0014c00>] ? ioat2_dma_prep_memcpy_lock+0x60/0x130 [ioatdma]
  [<ffffffff8175ffce>] do_page_fault+0xe/0x10
  [<ffffffff8175c862>] page_fault+0x22/0x30
  [<ffffffff81643991>] ? __kfree_skb+0x51/0xd0
  [<ffffffff813830b9>] ? copy_user_enhanced_fast_string+0x9/0x20
  [<ffffffff81388ea2>] ? memcpy_toiovec+0x52/0xa0
  [<ffffffff8164770f>] skb_copy_datagram_iovec+0x5f/0x2a0
  [<ffffffff8169d0f4>] tcp_rcv_established+0x674/0x7f0
  [<ffffffff816a68c5>] tcp_v4_do_rcv+0x2e5/0x4a0
  [..]
 ---[ end trace e30e3b01191b7617 ]---
 Mapped at:
  [<ffffffff8139c169>] debug_dma_map_page+0xb9/0x160
  [<ffffffff8142bf47>] dma_async_memcpy_pg_to_pg+0x127/0x210
  [<ffffffff8142cce9>] dma_memcpy_pg_to_iovec+0x119/0x1f0
  [<ffffffff81669d3c>] dma_skb_copy_datagram_iovec+0x11c/0x2b0
  [<ffffffff8169d1ca>] tcp_rcv_established+0x74a/0x7f0:

...the problem is that the receive path falls back to cpu-copy in
several locations and this trace is just one of the areas.  A few
options were considered to fix this:

1/ sync all dma whenever a cpu copy branch is taken

2/ modify the page fault handler to hold off while dma is in-flight

Option 1 adds yet more cpu overhead to an "offload" that struggles to compete
with cpu-copy.  Option 2 adds checks for behavior that is already documented as
broken when using get_user_pages().  At a minimum a debug mode is warranted to
catch and flag these violations of the dma-api vs get_user_pages().

Thanks to David for his reproducer.

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Reported-by: David Whipple <whipple@securedatainnovations.ch>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/edid: add quirk for BPC in Samsung NP700G7A-S01PL notebook

commit 49d45a31b71d7d9da74485922bdb63faf3dc9684 upstream.

This bug in EDID was exposed by:

commit eccea7920cfb009c2fa40e9ecdce8c36f61cab66
Author: Alex Deucher <alexander.deucher@amd.com>
Date:   Mon Mar 26 15:12:54 2012 -0400

    drm/radeon/kms: improve bpc handling (v2)

Which resulted in kind of regression in 3.5. This fixes
https://bugs.freedesktop.org/show_bug.cgi?id=70934

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/rt: Fix rq's cpupri leak while enqueue/dequeue child RT entities

commit 757dfcaa41844595964f1220f1d33182dae49976 upstream.

This patch touches the RT group scheduling case.

Functions inc_rt_prio_smp() and dec_rt_prio_smp() change (global) rq's
priority, while rt_rq passed to them may be not the top-level rt_rq.
This is wrong, because changing of priority on a child level does not
guarantee that the priority is the highest all over the rq. So, this
leak makes RT balancing unusable.

The short example: the task having the highest priority among all rq's
RT tasks (no one other task has the same priority) are waking on a
throttle rt_rq.  The rq's cpupri is set to the task's priority
equivalent, but real rq->rt.highest_prio.curr is less.

The patch below fixes the problem.

Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
CC: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/49231385567953@web4m.yandex.ru
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for overlapping extents in ext4_valid_extent_entries()

commit 5946d089379a35dda0e531710b48fca05446a196 upstream.

A corrupted ext4 may have out of order leaf extents, i.e.

extent: lblk 0--1023, len 1024, pblk 9217, flags: LEAF UNINIT
extent: lblk 1000--2047, len 1024, pblk 10241, flags: LEAF UNINIT
             ^^^^ overlap with previous extent

Reading such extent could hit BUG_ON() in ext4_es_cache_extent().

BUG_ON(end < lblk);

The problem is that __read_extent_tree_block() tries to cache holes as
well but assumes 'lblk' is greater than 'prev' and passes underflowed
length to ext4_es_cache_extent(). Fix it by checking for overlapping
extents in ext4_valid_extent_entries().

I hit this when fuzz testing ext4, and am able to reproduce it by
modifying the on-disk extent by hand.

Also add the check for (ee_block + len - 1) in ext4_valid_extent() to
make sure the value is not overflow.

Ran xfstests on patched ext4 and no regression.

Cc: Lukáš Czerner <lczerner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix use-after-free in ext4_mb_new_blocks

commit 4e8d2139802ce4f41936a687f06c560b12115247 upstream.

ext4_mb_put_pa should hold pa->pa_lock before accessing pa->pa_count.
While ext4_mb_use_preallocated checks pa->pa_deleted first and then
increments pa->count later, ext4_mb_put_pa decrements pa->pa_count
before holding pa->pa_lock and then sets pa->pa_deleted.

* Free sequence
ext4_mb_put_pa (1): atomic_dec_and_test pa->pa_count
ext4_mb_put_pa (2): lock pa->pa_lock
ext4_mb_put_pa (3): check pa->pa_deleted
ext4_mb_put_pa (4): set pa->pa_deleted=1
ext4_mb_put_pa (5): unlock pa->pa_lock
ext4_mb_put_pa (6): remove pa from a list
ext4_mb_pa_callback: free pa

* Use sequence
ext4_mb_use_preallocated (1): iterate over preallocation
ext4_mb_use_preallocated (2): lock pa->pa_lock
ext4_mb_use_preallocated (3): check pa->pa_deleted
ext4_mb_use_preallocated (4): increase pa->pa_count
ext4_mb_use_preallocated (5): unlock pa->pa_lock
ext4_mb_release_context: access pa

* Use-after-free sequence
[initial status] <pa->pa_deleted = 0, pa_count = 1>
ext4_mb_use_preallocated (1): iterate over preallocation
ext4_mb_use_preallocated (2): lock pa->pa_lock
ext4_mb_use_preallocated (3): check pa->pa_deleted
ext4_mb_put_pa (1): atomic_dec_and_test pa->pa_count
[pa_count decremented] <pa->pa_deleted = 0, pa_count = 0>
ext4_mb_use_preallocated (4): increase pa->pa_count
[pa_count incremented] <pa->pa_deleted = 0, pa_count = 1>
ext4_mb_use_preallocated (5): unlock pa->pa_lock
ext4_mb_put_pa (2): lock pa->pa_lock
ext4_mb_put_pa (3): check pa->pa_deleted
ext4_mb_put_pa (4): set pa->pa_deleted=1
[race condition!] <pa->pa_deleted = 1, pa_count = 1>
ext4_mb_put_pa (5): unlock pa->pa_lock
ext4_mb_put_pa (6): remove pa from a list
ext4_mb_pa_callback: free pa
ext4_mb_release_context: access pa

AddressSanitizer has detected use-after-free in ext4_mb_new_blocks
Bug report: http://goo.gl/rG1On3

Signed-off-by: Junho Ryu <jayr@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_idle: enable IVB Xeon support

commit 23795e580cad5d6b73d47d51b9074ce3e58bf334 upstream.

IVB Xeon currently shares the same parameters IVB client.

Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_idle: initial IVB support

commit 6edab08c24f9141d69cfa4683a0a027d86ab303e upstream.

From an OS point of view, IVB looks like SNB, but quicker.

Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Initialize the ftrace profiler for each possible cpu

commit c4602c1c818bd6626178d6d3fcc152d9f2f48ac0 upstream.

Ftrace currently initializes only the online CPUs. This implementation has
two problems:
- If we online a CPU after we enable the function profile, and then run the
  test, we will lose the trace information on that CPU.
  Steps to reproduce:
  # echo 0 > /sys/devices/system/cpu/cpu1/online
  # cd <debugfs>/tracing/
  # echo <some function name> >> set_ftrace_filter
  # echo 1 > function_profile_enabled
  # echo 1 > /sys/devices/system/cpu/cpu1/online
  # run test
- If we offline a CPU before we enable the function profile, we will not clear
  the trace information when we enable the function profile. It will trouble
  the users.
  Steps to reproduce:
  # cd <debugfs>/tracing/
  # echo <some function name> >> set_ftrace_filter
  # echo 1 > function_profile_enabled
  # run test
  # cat trace_stat/function*
  # echo 0 > /sys/devices/system/cpu/cpu1/online
  # echo 0 > function_profile_enabled
  # echo 1 > function_profile_enabled
  # cat trace_stat/function*
  # run test
  # cat trace_stat/function*

So it is better that we initialize the ftrace profiler for each possible cpu
every time we enable the function profile instead of just the online ones.

Link: http://lkml.kernel.org/r/1387178401-10619-1-git-send-email-miaox@cn.fujitsu.com
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: selinux_setprocattr()->ptrace_parent() needs rcu_read_lock()

commit c0c1439541f5305b57a83d599af32b74182933fe upstream.

selinux_setprocattr() does ptrace_parent(p) under task_lock(p),
but task_struct->alloc_lock doesn't pin ->parent or ->ptrace,
this looks confusing and triggers the "suspicious RCU usage"
warning because ptrace_parent() does rcu_dereference_check().

And in theory this is wrong, spin_lock()->preempt_disable()
doesn't necessarily imply rcu_read_lock() we need to access
the ->parent.

Reported-by: Evan McNabb <emcnabb@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix broken peer recv check

commit 46d01d63221c3508421dd72ff9c879f61053cffc upstream.

Fix a broken networking check. Return an error if peer recv fails.  If
secmark is active and the packet recv succeeds the peer recv error is
ignored.

Signed-off-by: Chad Hanson <chanson@trustedcs.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc-wdm: manage_power should always set needs_remote_wakeup

commit 4144bc861ed7934d56f16d2acd808d44af0fcc90 upstream.

Reported-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: Add SNDRV_PCM_STATE_PAUSED case in wait_for_avail function

commit ed697e1aaf7237b1a62af39f64463b05c262808d upstream.

When the process is sleeping at the SNDRV_PCM_STATE_PAUSED
state from the wait_for_avail function, the sleep process will be woken by
timeout(10 seconds). Even if the sleep process wake up by timeout, by this
patch, the process will continue with sleep and wait for the other state.

Signed-off-by: JongHo Kim <furmuwon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8904: fix DSP mode B configuration

commit f0199bc5e3a3ec13f9bc938556517ec430b36437 upstream.

When wm8904 work in DSP mode B, we still need to configure it to
work in DSP mode. Or else, it will work in Right Justified mode.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

TTY: pmac_zilog, check existence of ports in pmz_console_init()

commit dc1dc2f8a5dd863bf2e79f338fc3ae29e99c683a upstream.

When booting a multi-platform m68k kernel on a non-Mac with "console=ttyS0"
on the kernel command line, it crashes with:

Unable to handle kernel NULL pointer dereference at virtual address   (null)
Oops: 00000000
PC: [<0013ad28>] __pmz_startup+0x32/0x2a0
...
Call Trace: [<002c5d3e>] pmz_console_setup+0x64/0xe4

The normal tty driver doesn't crash, because init_pmz() checks
pmz_ports_count again after calling pmz_probe().

In the serial console initialization path, pmz_console_init() doesn't do
this, causing the driver to crash later.

Add a check for pmz_ports_count to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: kvm: fix rare but potential deadlock scene

commit 91648ec09c1ef69c4d840ab6dab391bfb452d554 upstream.

Since kvmppc_hv_find_lock_hpte() is called from both virtmode and
realmode, so it can trigger the deadlock.

Suppose the following scene:

Two physical cpuM, cpuN, two VM instances A, B, each VM has a group of
vcpus.

If on cpuM, vcpu_A_1 holds bitlock X (HPTE_V_HVLOCK), then is switched
out, and on cpuN, vcpu_A_2 try to lock X in realmode, then cpuN will be
caught in realmode for a long time.

What makes things even worse if the following happens,
  On cpuM, bitlockX is hold, on cpuN, Y is hold.
  vcpu_B_2 try to lock Y on cpuM in realmode
  vcpu_A_2 try to lock X on cpuN in realmode

Oops! deadlock happens

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: wake up 'safe' waiters when unregistering request

commit fc55d2c9448b34218ca58733a6f51fbede09575b upstream.

We also need to wake up 'safe' waiters if error occurs or request
aborted. Otherwise sync(2)/fsync(2) may hang forever.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: cleanup aborted requests when re-sending requests.

commit eb1b8af33c2e42a9a57fc0a7588f4a7b255d2e79 upstream.

Aborted requests usually get cleared when the reply is received.
If MDS crashes, no reply will be received. So we need to cleanup
aborted requests when re-sending requests.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: fix race in generic write

commit 6f6485463aada1ec6a0f3db6a03eb8e393d6bb55 upstream.

Fix race in generic write implementation, which could lead to
temporarily degraded throughput.

The current generic write implementation introduced by commit
27c7acf22047 ("USB: serial: reimplement generic fifo-based writes") has
always had this bug, although it's fairly hard to trigger and the
consequences are not likely to be noticed.

Specifically, a write() on one CPU while the completion handler is
running on another could result in only one of the two write urbs being
utilised to empty the remainder of the write fifo (unless there is a
second write() that doesn't race during that time).

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.4.75

ARM: OMAP2+: hwmod: Fix SOFTRESET logic

commit 313a76ee11cda6700548afe68499ef174a240688 upstream.

In _ocp_softreset(), after _set_softreset() + write_sysconfig(),
the hwmod's sysc_cache will always contain SOFTRESET bit set
so all further writes to sysconfig using this cache will initiate
a repeated SOFTRESET e.g. enable_sysc(). This is true for OMAP3 like
platforms that have RESET_DONE status in the SYSSTATUS register and
so the the SOFTRESET bit in SYSCONFIG is not automatically cleared.
It is not a problem for OMAP4 like platforms that indicate RESET
completion by clearing the SOFTRESET bit in the SYSCONFIG register.

This repeated SOFTRESET is undesired and was the root cause of
USB host issues on OMAP3 platforms when hwmod was allowed to do the
SOFTRESET for the USB Host module.

To fix this we clear the SOFTRESET bit and update the sysconfig
register + sysc_cache using write_sysconfig().

Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM
[paul@pwsan.com: renamed _clr_softreset() to _clear_softreset()]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net: update consumers of MSG_MORE to recognize MSG_SENDPAGE_NOTLAST"

It turns out that commit: d3f7d56a7a4671d395e8af87071068a195257bf6 was
applied to the tree twice, which didn't hurt anything, but it's good to
fix this up.

Reported-by: Veaceslav Falico <veaceslav@falico.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Shawn Landden <shawnlandden@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hpfs: fix warnings when the filesystem fills up

commit bbd465df73f0d8ba41b8a0732766a243d0f5b356 upstream.

This patch fixes warnings due to missing lock on write error path.

  WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]()
  Hardware name: empty
  Pid: 26563, comm: dd Tainted: P           O 3.9.4 #12
  Call Trace:
    hpfs_truncate+0x75/0x80 [hpfs]
    hpfs_write_begin+0x84/0x90 [hpfs]
    _hpfs_bmap+0x10/0x10 [hpfs]
    generic_file_buffered_write+0x121/0x2c0
    __generic_file_aio_write+0x1c7/0x3f0
    generic_file_aio_write+0x7c/0x100
    do_sync_write+0x98/0xd0
    hpfs_file_write+0xd/0x50 [hpfs]
    vfs_write+0xa2/0x160
    sys_write+0x51/0xa0
    page_fault+0x22/0x30
    system_call_fastpath+0x1a/0x1f

Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sc1200_wdt: Fix oops

commit dace8bbfccfd9e4fcccfffcfbd82881fda3e756f upstream.

If loaded with isapnp = 0 the driver explodes. This is catching
people out now and then. What should happen in the working case is
a complete mystery and the code appears terminally confused, but we
can at least make the error path work properly.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Partially-Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=53991
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ssv_dnp: use comedi_dio_update_state()

commit f6b316bcd8c421acd6fa5a6e18b4c846ecb9d965 upstream.

Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state.

Also, fix a bug where the state of the channels is returned in data[0].
The comedi core expects it to be returned in data[1].

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: fix possible NULL deref on detach

commit 2fd2bdfccae61efe18f6b92b6a45fbf936d75b48 upstream.

pcmuio_detach() is called by the comedi core even if pcmuio_attach()
returned an error, so `dev->private` might be `NULL`.  Check for that
before dereferencing it.

Also, as pointed out by Dan Carpenter, there is no need to check the
pointer passed to `kfree()` is non-NULL, so remove that check.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs: fix do_div() warning by instead using sector_div()

commit 3873d064b8538686bbbd4b858dc8a07db1f7f43a upstream.

When compiling a 32bit kernel with CONFIG_LBDAF=n the compiler complains like
shown below.  Fix this warning by instead using sector_div() which is provided
by the kernel.h header file.

fs/nfs/blocklayout/extents.c: In function ‘normalize’:
include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast [enabled by default]
fs/nfs/blocklayout/extents.c:47:13: note: in expansion of macro ‘do_div’
nfs/blocklayout/extents.c:47:2: warning: right shift count >= width of type [enabled by default]
fs/nfs/blocklayout/extents.c:47:2: warning: passing argument 1 of ‘__div64_32’ from incompatible pointer type [enabled by default]
include/asm-generic/div64.h:35:17: note: expected ‘uint64_t *’ but argument is of type ‘sector_t *’
 extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>