Jiri Pirko [Sat, 16 Jul 2022 11:02:39 +0000 (13:02 +0200)]
net: devlink: add unlocked variants of devlink_region_create/destroy() functions
Add unlocked variants of devlink_region_create/destroy() functions
to be used in drivers called-in with devlink->lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Sat, 16 Jul 2022 11:02:38 +0000 (13:02 +0200)]
mlxsw: convert driver to use unlocked devlink API during init/fini
Prepare for devlink reload being called with devlink->lock held and
convert the mlxsw driver to use unlocked devlink API during init and
fini flows. Take devl_lock() in reload_down() and reload_up() ops in the
meantime before reload cmd is converted to take the lock itself.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Sat, 16 Jul 2022 11:02:37 +0000 (13:02 +0200)]
net: devlink: add unlocked variants of devlink_dpipe*() functions
Add unlocked variants of devlink_dpipe*() functions to be used
in drivers called-in with devlink->lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Sat, 16 Jul 2022 11:02:36 +0000 (13:02 +0200)]
net: devlink: add unlocked variants of devlink_sb*() functions
Add unlocked variants of devlink_sb*() functions to be used
in drivers called-in with devlink->lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Sat, 16 Jul 2022 11:02:35 +0000 (13:02 +0200)]
net: devlink: add unlocked variants of devlink_resource*() functions
Add unlocked variants of devlink_resource*() functions to be used
in drivers called-in with devlink->lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Sat, 16 Jul 2022 11:02:34 +0000 (13:02 +0200)]
net: devlink: add unlocked variants of devling_trap*() functions
Add unlocked variants of devl_trap*() functions to be used in drivers
called-in with devlink->lock held.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Moshe Shemesh [Sat, 16 Jul 2022 11:02:33 +0000 (13:02 +0200)]
net: devlink: avoid false DEADLOCK warning reported by lockdep
Add a lock_class_key per devlink instance to avoid DEADLOCK warning by
lockdep, while locking more than one devlink instance in driver code,
for example in opening VFs flow.
Kernel log:
[ 101.433802] ============================================
[ 101.433803] WARNING: possible recursive locking detected
[ 101.433810] 5.19.0-rc1+ #35 Not tainted
[ 101.433812] --------------------------------------------
[ 101.433813] bash/892 is trying to acquire lock:
[ 101.433815]
ffff888127bfc2f8 (&devlink->lock){+.+.}-{3:3}, at: probe_one+0x3c/0x690 [mlx5_core]
[ 101.433909]
but task is already holding lock:
[ 101.433910]
ffff888118f4c2f8 (&devlink->lock){+.+.}-{3:3}, at: mlx5_core_sriov_configure+0x62/0x280 [mlx5_core]
[ 101.433989]
other info that might help us debug this:
[ 101.433990] Possible unsafe locking scenario:
[ 101.433991] CPU0
[ 101.433991] ----
[ 101.433992] lock(&devlink->lock);
[ 101.433993] lock(&devlink->lock);
[ 101.433995]
*** DEADLOCK ***
[ 101.433996] May be due to missing lock nesting notation
[ 101.433996] 6 locks held by bash/892:
[ 101.433998] #0:
ffff88810eb50448 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0xf3/0x1d0
[ 101.434009] #1:
ffff888114777c88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x20d/0x520
[ 101.434017] #2:
ffff888102b58660 (kn->active#231){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x230/0x520
[ 101.434023] #3:
ffff888102d70198 (&dev->mutex){....}-{3:3}, at: sriov_numvfs_store+0x132/0x310
[ 101.434031] #4:
ffff888118f4c2f8 (&devlink->lock){+.+.}-{3:3}, at: mlx5_core_sriov_configure+0x62/0x280 [mlx5_core]
[ 101.434108] #5:
ffff88812adce198 (&dev->mutex){....}-{3:3}, at: __device_attach+0x76/0x430
[ 101.434116]
stack backtrace:
[ 101.434118] CPU: 5 PID: 892 Comm: bash Not tainted 5.19.0-rc1+ #35
[ 101.434120] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 101.434130] Call Trace:
[ 101.434133] <TASK>
[ 101.434135] dump_stack_lvl+0x57/0x7d
[ 101.434145] __lock_acquire.cold+0x1df/0x3e7
[ 101.434151] ? register_lock_class+0x1880/0x1880
[ 101.434157] lock_acquire+0x1c1/0x550
[ 101.434160] ? probe_one+0x3c/0x690 [mlx5_core]
[ 101.434229] ? lockdep_hardirqs_on_prepare+0x400/0x400
[ 101.434232] ? __xa_alloc+0x1ed/0x2d0
[ 101.434236] ? ksys_write+0xf3/0x1d0
[ 101.434239] __mutex_lock+0x12c/0x14b0
[ 101.434243] ? probe_one+0x3c/0x690 [mlx5_core]
[ 101.434312] ? probe_one+0x3c/0x690 [mlx5_core]
[ 101.434380] ? devlink_alloc_ns+0x11b/0x910
[ 101.434385] ? mutex_lock_io_nested+0x1320/0x1320
[ 101.434388] ? lockdep_init_map_type+0x21a/0x7d0
[ 101.434391] ? lockdep_init_map_type+0x21a/0x7d0
[ 101.434393] ? __init_swait_queue_head+0x70/0xd0
[ 101.434397] probe_one+0x3c/0x690 [mlx5_core]
[ 101.434467] pci_device_probe+0x1b4/0x480
[ 101.434471] really_probe+0x1e0/0xaa0
[ 101.434474] __driver_probe_device+0x219/0x480
[ 101.434478] driver_probe_device+0x49/0x130
[ 101.434481] __device_attach_driver+0x1b8/0x280
[ 101.434484] ? driver_allows_async_probing+0x140/0x140
[ 101.434487] bus_for_each_drv+0x123/0x1a0
[ 101.434489] ? bus_for_each_dev+0x1a0/0x1a0
[ 101.434491] ? lockdep_hardirqs_on_prepare+0x286/0x400
[ 101.434494] ? trace_hardirqs_on+0x2d/0x100
[ 101.434498] __device_attach+0x1a3/0x430
[ 101.434501] ? device_driver_attach+0x1e0/0x1e0
[ 101.434503] ? pci_bridge_d3_possible+0x1e0/0x1e0
[ 101.434506] ? pci_create_resource_files+0xeb/0x190
[ 101.434511] pci_bus_add_device+0x6c/0xa0
[ 101.434514] pci_iov_add_virtfn+0x9e4/0xe00
[ 101.434517] ? trace_hardirqs_on+0x2d/0x100
[ 101.434521] sriov_enable+0x64a/0xca0
[ 101.434524] ? pcibios_sriov_disable+0x10/0x10
[ 101.434528] mlx5_core_sriov_configure+0xab/0x280 [mlx5_core]
[ 101.434602] sriov_numvfs_store+0x20a/0x310
[ 101.434605] ? sriov_totalvfs_show+0xc0/0xc0
[ 101.434608] ? sysfs_file_ops+0x170/0x170
[ 101.434611] ? sysfs_file_ops+0x117/0x170
[ 101.434614] ? sysfs_file_ops+0x170/0x170
[ 101.434616] kernfs_fop_write_iter+0x348/0x520
[ 101.434619] new_sync_write+0x2e5/0x520
[ 101.434621] ? new_sync_read+0x520/0x520
[ 101.434624] ? lock_acquire+0x1c1/0x550
[ 101.434626] ? lockdep_hardirqs_on_prepare+0x400/0x400
[ 101.434630] vfs_write+0x5cb/0x8d0
[ 101.434633] ksys_write+0xf3/0x1d0
[ 101.434635] ? __x64_sys_read+0xb0/0xb0
[ 101.434638] ? lockdep_hardirqs_on_prepare+0x286/0x400
[ 101.434640] ? syscall_enter_from_user_mode+0x1d/0x50
[ 101.434643] do_syscall_64+0x3d/0x90
[ 101.434647] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 101.434650] RIP: 0033:0x7f5ff536b2f7
[ 101.434658] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f
1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f
05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 101.434661] RSP: 002b:
00007ffd9ea85d58 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 101.434664] RAX:
ffffffffffffffda RBX:
0000000000000002 RCX:
00007f5ff536b2f7
[ 101.434666] RDX:
0000000000000002 RSI:
000055c4c279e230 RDI:
0000000000000001
[ 101.434668] RBP:
000055c4c279e230 R08:
000000000000000a R09:
0000000000000001
[ 101.434669] R10:
000055c4c283cbf0 R11:
0000000000000246 R12:
0000000000000002
[ 101.434670] R13:
00007f5ff543d500 R14:
0000000000000002 R15:
00007f5ff543d700
[ 101.434673] </TASK>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sieng-Piaw Liew [Fri, 15 Jul 2022 07:50:43 +0000 (15:50 +0800)]
atl1c: use netif_napi_add_tx() for Tx NAPI
Use netif_napi_add_tx() for NAPI in Tx direction instead of the regular
netif_napi_add() function.
Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Ramadoss [Fri, 15 Jul 2022 05:33:34 +0000 (11:03 +0530)]
net: dsa: microchip: fix Clang -Wunused-const-variable warning on 'ksz_dt_ids'
This patch removes the of_match_ptr() pointer when dereferencing the
ksz_dt_ids which produce the unused variable warning.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 18 Jul 2022 10:24:11 +0000 (11:24 +0100)]
Merge branch 'tls-rx-avoid-skb_cow_data'
Jakub Kicinski says:
====================
tls: rx: avoid skb_cow_data()
TLS calls skb_cow_data() on the skb it received from strparser
whenever it needs to hold onto the skb with the decrypted data.
(The alternative being decrypting directly to a user space buffer
in whic case the input skb doesn't get modified or used after.)
TLS needs the decrypted skb:
- almost always with TLS 1.3 (unless the new NoPad is enabled);
- when user space buffer is too small to fit the record;
- when BPF sockmap is enabled.
Most of the time the skb we get out of strparser is a clone of
a 64kB data unit coalsced by GRO. To make things worse skb_cow_data()
tries to output a linear skb and allocates it with GFP_ATOMIC.
This occasionally fails even under moderate memory pressure.
This patch set rejigs the TLS Rx so that we don't expect decryption
in place. The decryption handlers return an skb which may or may not
be the skb from strparser. For TLS 1.3 this results in a 20-30%
performance improvement without NoPad enabled.
v2: rebase after
3d8c51b25a23 ("net/tls: Check for errors in tls_device_init")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:35 +0000 (22:22 -0700)]
tls: rx: decrypt into a fresh skb
We currently CoW Rx skbs whenever we can't decrypt to a user
space buffer. The skbs can be enormous (64kB) and CoW does
a linear alloc which has a strong chance of failing under
memory pressure. Or even without, skb_cow_data() assumes
GFP_ATOMIC.
Allocate a new frag'd skb and decrypt into it. We finally
take advantage of the decrypted skb getting returned via
darg.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:34 +0000 (22:22 -0700)]
tls: rx: async: don't put async zc on the list
The "zero-copy" path in SW TLS will engage either for no skbs or
for all but last. If the recvmsg parameters are right and the
socket can do ZC we'll ZC until the iterator can't fit a full
record at which point we'll decrypt one more record and copy
over the necessary bits to fill up the request.
The only reason we hold onto the ZC skbs which went thru the async
path until the end of recvmsg() is to count bytes. We need an accurate
count of zc'ed bytes so that we can calculate how much of the non-zc'd
data to copy. To allow freeing input skbs on the ZC path count only
how much of the list we'll need to consume.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:33 +0000 (22:22 -0700)]
tls: rx: async: hold onto the input skb
Async crypto currently benefits from the fact that we decrypt
in place. When we allow input and output to be different skbs
we will have to hang onto the input while we move to the next
record. Clone the inputs and keep them on a list.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:32 +0000 (22:22 -0700)]
tls: rx: async: adjust record geometry immediately
Async crypto TLS Rx currently waits for crypto to be done
in order to strip the TLS header and tailer. Simplify
the code by moving the pointers immediately, since only
TLS 1.2 is supported here there is no message padding.
This simplifies the decryption into a new skb in the next
patch as we don't have to worry about input vs output
skb in the decrypt_done() handler any more.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:31 +0000 (22:22 -0700)]
tls: rx: return the decrypted skb via darg
Instead of using ctx->recv_pkt after decryption read the skb
from darg.skb. This moves the decision of what the "output skb"
is to the decrypt handlers. For now after decrypt handler returns
successfully ctx->recv_pkt is simply moved to darg.skb, but it
will change soon.
Note that tls_decrypt_sg() cannot clear the ctx->recv_pkt
because it gets called to re-encrypt (i.e. by the device offload).
So we need an awkward temporary if() in tls_rx_one_record().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:30 +0000 (22:22 -0700)]
tls: rx: read the input skb from ctx->recv_pkt
Callers always pass ctx->recv_pkt into decrypt_skb_update(),
and it propagates it to its callees. This may give someone
the false impression that those functions can accept any valid
skb containing a TLS record. That's not the case, the record
sequence number is read from the context, and they can only
take the next record coming out of the strp.
Let the functions get the skb from the context instead of
passing it in. This will also make it cleaner to return
a different skb than ctx->recv_pkt as the decrypted one
later on.
Since we're touching the definition of decrypt_skb_update()
use this as an opportunity to rename it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:29 +0000 (22:22 -0700)]
tls: rx: factor out device darg update
I already forgot to transform darg from input to output
semantics once on the NIC inline crypto fastpath. To
avoid this happening again create a device equivalent
of decrypt_internal(). A function responsible for decryption
and transforming darg.
While at it rename decrypt_internal() to a hopefully slightly
more meaningful name.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:28 +0000 (22:22 -0700)]
tls: rx: remove the message decrypted tracking
We no longer allow a decrypted skb to remain linked to ctx->recv_pkt.
Anything on the list is decrypted, anything on ctx->recv_pkt needs
to be decrypted.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:27 +0000 (22:22 -0700)]
tls: rx: don't keep decrypted skbs on ctx->recv_pkt
Detach the skb from ctx->recv_pkt after decryption is done,
even if we can't consume it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:26 +0000 (22:22 -0700)]
tls: rx: don't try to keep the skbs always on the list
I thought that having the skb either always on the ctx->rx_list
or ctx->recv_pkt will simplify the handling, as we would not
have to remember to flip it from one to the other on exit paths.
This became a little harder to justify with the fix for BPF
sockmaps. Subsequent changes will make the situation even worse.
Queue the skbs only when really needed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:22:25 +0000 (22:22 -0700)]
tls: rx: allow only one reader at a time
recvmsg() in TLS gets data from the skb list (rx_list) or fresh
skbs we read from TCP via strparser. The former holds skbs which were
already decrypted for peek or decrypted and partially consumed.
tls_wait_data() only notices appearance of fresh skbs coming out
of TCP (or psock). It is possible, if there is a concurrent call
to peek() and recv() that the peek() will move the data from input
to rx_list without recv() noticing. recv() will then read data out
of order or never wake up.
This is not a practical use case/concern, but it makes the self
tests less reliable. This patch solves the problem by allowing
only one reader in.
Because having multiple processes calling read()/peek() is not
normal avoid adding a lock and try to fast-path the single reader
case.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 18 Jul 2022 10:19:17 +0000 (11:19 +0100)]
Merge branch 'net-smc-virt-contig-buffers'
Wen Gu says:
====================
net/smc: Introduce virtually contiguous buffers for SMC-R
On long-running enterprise production servers, high-order contiguous
memory pages are usually very rare and in most cases we can only get
fragmented pages.
When replacing TCP with SMC-R in such production scenarios, attempting
to allocate high-order physically contiguous sndbufs and RMBs may result
in frequent memory compaction, which will cause unexpected hung issue
and further stability risks.
So this patch set is aimed to allow SMC-R link group to use virtually
contiguous sndbufs and RMBs to avoid potential issues mentioned above.
Whether to use physically or virtually contiguous buffers can be set
by sysctl smcr_buf_type.
Note that using virtually contiguous buffers will bring an acceptable
performance regression, which can be mainly divided into two parts:
1) regression in data path, which is brought by additional address
translation of sndbuf by RNIC in Tx. But in general, translating
address through MTT is fast. According to qperf test, this part
regression is basically less than 10% in latency and bandwidth.
(see patch 5/6 for details)
2) regression in buffer initialization and destruction path, which is
brought by additional MR operations of sndbufs. But thanks to link
group buffer reuse mechanism, the impact of this kind of regression
decreases as times of buffer reuse increases.
Patch set overview:
- Patch 1/6 and 2/6 mainly about simplifying and optimizing DMA sync
operation, which will reduce overhead on the data path, especially
when using virtually contiguous buffers;
- Patch 3/6 and 4/6 introduce a sysctl smcr_buf_type to set the type
of buffers in new created link group;
- Patch 5/6 allows SMC-R to use virtually contiguous sndbufs and RMBs,
including buffer creation, destruction, MR operation and access;
- patch 6/6 extends netlink attribute for buffer type of SMC-R link group;
v1->v2:
- Patch 5/6 fixes build issue on 32bit;
- Patch 3/6 adds description of new sysctl in smc-sysctl.rst;
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Wen Gu [Thu, 14 Jul 2022 09:44:05 +0000 (17:44 +0800)]
net/smc: Extend SMC-R link group netlink attribute
Extend SMC-R link group netlink attribute SMC_GEN_LGR_SMCR.
Introduce SMC_NLA_LGR_R_BUF_TYPE to show the buffer type of
SMC-R link group.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wen Gu [Thu, 14 Jul 2022 09:44:04 +0000 (17:44 +0800)]
net/smc: Allow virtually contiguous sndbufs or RMBs for SMC-R
On long-running enterprise production servers, high-order contiguous
memory pages are usually very rare and in most cases we can only get
fragmented pages.
When replacing TCP with SMC-R in such production scenarios, attempting
to allocate high-order physically contiguous sndbufs and RMBs may result
in frequent memory compaction, which will cause unexpected hung issue
and further stability risks.
So this patch is aimed to allow SMC-R link group to use virtually
contiguous sndbufs and RMBs to avoid potential issues mentioned above.
Whether to use physically or virtually contiguous buffers can be set
by sysctl smcr_buf_type.
Note that using virtually contiguous buffers will bring an acceptable
performance regression, which can be mainly divided into two parts:
1) regression in data path, which is brought by additional address
translation of sndbuf by RNIC in Tx. But in general, translating
address through MTT is fast.
Taking 256KB sndbuf and RMB as an example, the comparisons in qperf
latency and bandwidth test with physically and virtually contiguous
buffers are as follows:
- client:
smc_run taskset -c <cpu> qperf <server> -oo msg_size:1:64K:*2\
-t 5 -vu tcp_{bw|lat}
- server:
smc_run taskset -c <cpu> qperf
[latency]
msgsize tcp smcr smcr-use-virt-buf
1 11.17 us 7.56 us 7.51 us (-0.67%)
2 10.65 us 7.74 us 7.56 us (-2.31%)
4 11.11 us 7.52 us 7.59 us ( 0.84%)
8 10.83 us 7.55 us 7.51 us (-0.48%)
16 11.21 us 7.46 us 7.51 us ( 0.71%)
32 10.65 us 7.53 us 7.58 us ( 0.61%)
64 10.95 us 7.74 us 7.80 us ( 0.76%)
128 11.14 us 7.83 us 7.87 us ( 0.47%)
256 10.97 us 7.94 us 7.92 us (-0.28%)
512 11.23 us 7.94 us 8.20 us ( 3.25%)
1024 11.60 us 8.12 us 8.20 us ( 0.96%)
2048 14.04 us 8.30 us 8.51 us ( 2.49%)
4096 16.88 us 9.13 us 9.07 us (-0.64%)
8192 22.50 us 10.56 us 11.22 us ( 6.26%)
16384 28.99 us 12.88 us 13.83 us ( 7.37%)
32768 40.13 us 16.76 us 16.95 us ( 1.16%)
65536 68.70 us 24.68 us 24.85 us ( 0.68%)
[bandwidth]
msgsize tcp smcr smcr-use-virt-buf
1 1.65 MB/s 1.59 MB/s 1.53 MB/s (-3.88%)
2 3.32 MB/s 3.17 MB/s 3.08 MB/s (-2.67%)
4 6.66 MB/s 6.33 MB/s 6.09 MB/s (-3.85%)
8 13.67 MB/s 13.45 MB/s 11.97 MB/s (-10.99%)
16 25.36 MB/s 27.15 MB/s 24.16 MB/s (-11.01%)
32 48.22 MB/s 54.24 MB/s 49.41 MB/s (-8.89%)
64 106.79 MB/s 107.32 MB/s 99.05 MB/s (-7.71%)
128 210.21 MB/s 202.46 MB/s 201.02 MB/s (-0.71%)
256 400.81 MB/s 416.81 MB/s 393.52 MB/s (-5.59%)
512 746.49 MB/s 834.12 MB/s 809.99 MB/s (-2.89%)
1024 1292.33 MB/s 1641.96 MB/s 1571.82 MB/s (-4.27%)
2048 2007.64 MB/s 2760.44 MB/s 2717.68 MB/s (-1.55%)
4096 2665.17 MB/s 4157.44 MB/s 4070.76 MB/s (-2.09%)
8192 3159.72 MB/s 4361.57 MB/s 4270.65 MB/s (-2.08%)
16384 4186.70 MB/s 4574.13 MB/s 4501.17 MB/s (-1.60%)
32768 4093.21 MB/s 4487.42 MB/s 4322.43 MB/s (-3.68%)
65536 4057.14 MB/s 4735.61 MB/s 4555.17 MB/s (-3.81%)
2) regression in buffer initialization and destruction path, which is
brought by additional MR operations of sndbufs. But thanks to link
group buffer reuse mechanism, the impact of this kind of regression
decreases as times of buffer reuse increases.
Taking 256KB sndbuf and RMB as an example, latency of some key SMC-R
buffer-related function obtained by bpftrace are as follows:
Function Phys-bufs Virt-bufs
smcr_new_buf_create() 67154 ns 79164 ns
smc_ib_buf_map_sg() 525 ns 928 ns
smc_ib_get_memory_region() 162294 ns 161191 ns
smc_wr_reg_send() 9957 ns 9635 ns
smc_ib_put_memory_region() 203548 ns 198374 ns
smc_ib_buf_unmap_sg() 508 ns 1158 ns
------------
Test environment notes:
1. Above tests run on 2 VMs within the same Host.
2. The NIC is ConnectX-4Lx, using SRIOV and passing through 2 VFs to
the each VM respectively.
3. VMs' vCPUs are binded to different physical CPUs, and the binded
physical CPUs are isolated by `isolcpus=xxx` cmdline.
4. NICs' queue number are set to 1.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wen Gu [Thu, 14 Jul 2022 09:44:03 +0000 (17:44 +0800)]
net/smc: Use sysctl-specified types of buffers in new link group
This patch introduces a new SMC-R specific element buf_type
in struct smc_link_group, for recording the value of sysctl
smcr_buf_type when link group is created.
New created link group will create and reuse buffers of the
type specified by buf_type.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wen Gu [Thu, 14 Jul 2022 09:44:02 +0000 (17:44 +0800)]
net/smc: Introduce a sysctl for setting SMC-R buffer type
This patch introduces the sysctl smcr_buf_type for setting
the type of SMC-R sndbufs and RMBs.
Valid values includes:
- SMCR_PHYS_CONT_BUFS, which means use physically contiguous
buffers for better performance and is the default value.
- SMCR_VIRT_CONT_BUFS, which means use virtually contiguous
buffers in case of physically contiguous memory is scarce.
- SMCR_MIXED_BUFS, which means first try to use physically
contiguous buffers. If not available, then use virtually
contiguous buffers.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Thu, 14 Jul 2022 09:44:01 +0000 (17:44 +0800)]
net/smc: optimize for smc_sndbuf_sync_sg_for_device and smc_rmb_sync_sg_for_cpu
Some CPU, such as Xeon, can guarantee DMA cache coherency.
So it is no need to use dma sync APIs to flush cache on such CPUs.
In order to avoid calling dma sync APIs on the IO path, use the
dma_need_sync to check whether smc_buf_desc needs dma sync when
creating smc_buf_desc.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangguan Wang [Thu, 14 Jul 2022 09:44:00 +0000 (17:44 +0800)]
net/smc: remove redundant dma sync ops
smc_ib_sync_sg_for_cpu/device are the ops used for dma memory cache
consistency. Smc sndbufs are dma buffers, where CPU writes data to
it and PCIE device reads data from it. So for sndbufs,
smc_ib_sync_sg_for_device is needed and smc_ib_sync_sg_for_cpu is
redundant as PCIE device will not write the buffers. Smc rmbs
are dma buffers, where PCIE device write data to it and CPU read
data from it. So for rmbs, smc_ib_sync_sg_for_cpu is needed and
smc_ib_sync_sg_for_device is redundant as CPU will not write the buffers.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 16 Jul 2022 01:55:54 +0000 (18:55 -0700)]
Merge branch 'net-ipv4-ipv6-new-option-to-accept-garp-untracked-na-only-if-in-network'
Jaehee Park says:
====================
net: ipv4/ipv6: new option to accept garp/untracked na only if in-network
The first patch adds an option to learn a neighbor from garp only if
the source ip is in the same subnet as an address configured on the
interface that received the garp message. The option has been added
to arp_accept in ipv4.
The same feature has been added to ndisc (patch 2). For ipv6, the
subnet filtering knob is an extension of the accept_untracked_na
option introduced in these patches:
https://lore.kernel.org/all/
642672cb-8b11-c78f-8975-
f287ece9e89e@gmail.com/t/
https://lore.kernel.org/netdev/
20220530101414.65439-1-aajith@arista.com/T/
The third patch contains selftests for testing the different options
for accepting arp and neighbor advertisements.
====================
Link: https://lore.kernel.org/r/cover.1657755188.git.jhpark1013@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jaehee Park [Wed, 13 Jul 2022 23:40:49 +0000 (16:40 -0700)]
selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na
ipv4 arp_accept has a new option '2' to create new neighbor entries
only if the src ip is in the same subnet as an address configured on
the interface that received the garp message. This selftest tests all
options in arp_accept.
ipv6 has a sysctl endpoint, accept_untracked_na, that defines the
behavior for accepting untracked neighbor advertisements. A new option
similar to that of arp_accept for learning only from the same subnet is
added to accept_untracked_na. This selftest tests this new feature.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Suggested-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jaehee Park [Wed, 13 Jul 2022 23:40:48 +0000 (16:40 -0700)]
net: ipv6: new accept_untracked_na option to accept na only if in-network
This patch adds a third knob, '2', which extends the
accept_untracked_na option to learn a neighbor only if the src ip is
in the same subnet as an address configured on the interface that
received the neighbor advertisement. This is similar to the arp_accept
configuration for ipv4.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Suggested-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jaehee Park [Wed, 13 Jul 2022 23:40:47 +0000 (16:40 -0700)]
net: ipv4: new arp_accept option to accept garp only if in-network
In many deployments, we want the option to not learn a neighbor from
garp if the src ip is not in the same subnet as an address configured
on the interface that received the garp message. net.ipv4.arp_accept
sysctl is currently used to control creation of a neigh from a
received garp packet. This patch adds a new option '2' to
net.ipv4.arp_accept which extends option '1' by including the subnet
check.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Suggested-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sunil Goutham [Thu, 14 Jul 2022 05:35:55 +0000 (11:05 +0530)]
octeontx2-af: Set NIX link credits based on max LMAC
When number of LMACs active on a CGX/RPM are 3, then
current NIX link credit config based on per lmac fifo
length which inturn is calculated as
'lmac_fifo_len = total_fifo_len / 3', is incorrect. In HW
one of the LMAC gets half of the FIFO and rest gets 1/4th.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha Sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ratheesh Kannoth [Thu, 14 Jul 2022 04:28:43 +0000 (09:58 +0530)]
octeontx2-af: Fixes static warnings
Fixes smatch static tool warning reported by smatch tool.
rvu_npc_hash.c:1232 rvu_npc_exact_del_table_entry_by_id() error:
uninitialized symbol 'drop_mcam_idx'.
rvu_npc_hash.c:1312 rvu_npc_exact_add_table_entry() error:
uninitialized symbol 'drop_mcam_idx'.
rvu_npc_hash.c:1391 rvu_npc_exact_update_table_entry() error:
uninitialized symbol 'hash_index'.
rvu_npc_hash.c:1428 rvu_npc_exact_promisc_disable() error:
uninitialized symbol 'drop_mcam_idx'.
rvu_npc_hash.c:1473 rvu_npc_exact_promisc_enable() error:
uninitialized symbol 'drop_mcam_idx'.
otx2_dmac_flt.c:191 otx2_dmacflt_update() error: 'rsp'
dereferencing possible ERR_PTR()
otx2_dmac_flt.c:60 otx2_dmacflt_add_pfmac() error: 'rsp'
dereferencing possible ERR_PTR()
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi [Wed, 13 Jul 2022 20:53:50 +0000 (22:53 +0200)]
net: dsa: qca8k: move driver to qca dir
Move qca8k driver to qca dir in preparation for code split and
introduction of ipq4019 switch based on qca8k.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peilin Ye [Wed, 13 Jul 2022 20:40:51 +0000 (13:40 -0700)]
net/sched: sch_cbq: Delete unused delay_timer
delay_timer has been unused since commit
c3498d34dd36 ("cbq: remove
TCA_CBQ_OVL_STRATEGY support"). Delete it.
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:11:37 +0000 (22:11 -0700)]
Merge tag 'mlx5-updates-2022-07-13' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-07-13
1) Support 802.1ad for bridge offloads
Vlad Buslov Says:
=================
Current mlx5 bridge VLAN offload implementation only supports 802.1Q VLAN
Ethernet protocol. That protocol type is assumed by default and
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification is ignored.
In order to support dynamically setting VLAN protocol handle
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification by flushing FDB and
re-creating VLAN modify header actions with a new protocol. Implement support
for 802.1ad protocol by saving the current VLAN protocol to per-bridge variable
and re-create the necessary flow groups according to its current value (either
use cvlan or svlan flow fields).
==================
2) debugfs to count ongoing FW commands
3) debugfs to query eswitch vport firmware diagnostic counters
4) Add missing meter configuration in flow action
5) Some misc cleanup
* tag 'mlx5-updates-2022-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Remove the duplicating check for striding RQ when enabling LRO
net/mlx5e: Move the LRO-XSK check to mlx5e_fix_features
net/mlx5e: Extend flower police validation
net/mlx5e: configure meter in flow action
net/mlx5e: Removed useless code in function
net/mlx5: Bridge, implement QinQ support
net/mlx5: Bridge, implement infrastructure for VLAN protocol change
net/mlx5: Bridge, extract VLAN push/pop actions creation
net/mlx5: Bridge, rename filter fg to vlan_filter
net/mlx5: Bridge, refactor groups sizes and indices
net/mlx5: debugfs, Add num of in-use FW command interface slots
net/mlx5: Expose vnic diagnostic counters for eswitch managed vports
net/mlx5: Use software VHCA id when it's supported
net/mlx5: Introduce ifc bits for using software vhca id
net/mlx5: Use the bitmap API to allocate bitmaps
====================
Link: https://lore.kernel.org/r/20220713225859.401241-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 15 Jul 2022 04:58:49 +0000 (21:58 -0700)]
Merge branch 'net-devlink-couple-of-trivial-fixes'
Jiri Pirko says:
====================
net: devlink: couple of trivial fixes
Just a couple of trivial fixes I found on the way.
====================
Link: https://lore.kernel.org/r/20220713141853.2992014-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Wed, 13 Jul 2022 14:18:53 +0000 (16:18 +0200)]
net: devlink: fix return statement in devlink_port_new_notify()
Return directly without intermediate value store at the end of
devlink_port_new_notify() function.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Wed, 13 Jul 2022 14:18:52 +0000 (16:18 +0200)]
net: devlink: fix a typo in function name devlink_port_new_notifiy()
Fix the typo in a name of devlink_port_new_notifiy() function.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko [Wed, 13 Jul 2022 14:18:51 +0000 (16:18 +0200)]
net: devlink: make devlink_dpipe_headers_register() return void
The return value is not used, so change the return value type to void.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 14 Jul 2022 21:19:42 +0000 (14:19 -0700)]
Merge git://git./linux/kernel/git/netdev/net
include/net/sock.h
310731e2f161 ("net: Fix data-races around sysctl_mem.")
e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"")
https://lore.kernel.org/all/
20220711120211.
7c8b7cba@canb.auug.org.au/
net/ipv4/fib_semantics.c
747c14307214 ("ip: fix dflt addr selection for connected nexthop")
d62607c3fe45 ("net: rename reference+tracking helpers")
net/tls/tls.h
include/net/tls.h
3d8c51b25a23 ("net/tls: Check for errors in tls_device_init")
587903142308 ("tls: create an internal header")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan Chancellor [Wed, 13 Jul 2022 15:24:37 +0000 (08:24 -0700)]
x86/speculation: Use DECLARE_PER_CPU for x86_spec_ctrl_current
Clang warns:
arch/x86/kernel/cpu/bugs.c:58:21: error: section attribute is specified on redeclared variable [-Werror,-Wsection]
DEFINE_PER_CPU(u64, x86_spec_ctrl_current);
^
arch/x86/include/asm/nospec-branch.h:283:12: note: previous declaration is here
extern u64 x86_spec_ctrl_current;
^
1 error generated.
The declaration should be using DECLARE_PER_CPU instead so all
attributes stay in sync.
Cc: stable@vger.kernel.org
Fixes:
fc02735b14ff ("KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 14 Jul 2022 19:48:07 +0000 (12:48 -0700)]
Merge tag 'net-5.19-rc7' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf and wireless.
Still no major regressions, the release continues to be calm. An
uptick of fixes this time around due to trivial data race fixes and
patches flowing down from subtrees.
There has been a few driver fixes (particularly a few fixes for false
positives due to
66e4c8d95008 which went into -next in May!) that make
me worry the wide testing is not exactly fully through.
So "calm" but not "let's just cut the final ASAP" vibes over here.
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering (after
atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"
* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
nfp: flower: configure tunnel neighbour on cmsg rx
net/tls: Check for errors in tls_device_init
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
selftests/net: test nexthop without gw
ip: fix dflt addr selection for connected nexthop
net: atlantic: remove aq_nic_deinit() when resume
net: atlantic: remove deep parameter on suspend/resume functions
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: sunhme: output link status with a single print.
r8152: fix accessing unset transport header
net: stmmac: fix leaks in probe
net: ftgmac100: Hold reference returned by of_get_child_by_name()
nexthop: Fix data-races around nexthop_compat_mode.
ipv4: Fix data-races around sysctl_ip_dynaddr.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
...
Linus Torvalds [Thu, 14 Jul 2022 19:35:15 +0000 (12:35 -0700)]
Merge tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three smb3 client fixes:
- two multichannel fixes: fix a potential deadlock freeing a channel,
and fix a race condition on failed creation of a new channel
- mount failure fix: work around a server bug in some common older
Samba servers by avoiding padding at the end of the negotiate
protocol request"
* tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: workaround negprot bug in some Samba servers
cifs: remove unnecessary locking of chan_lock while freeing session
cifs: fix race condition with delayed threads
Linus Torvalds [Thu, 14 Jul 2022 19:29:43 +0000 (12:29 -0700)]
Merge tag 'nfsd-5.19-3' of git://git./linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Notable regression fixes:
- Enable SETATTR(time_create) to fix regression with Mac OS clients
- Fix a lockd crasher and broken NLM UNLCK behavior"
* tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
lockd: fix nlm_close_files
lockd: set fl_owner when unlocking files
NFSD: Decode NFSv4 birth time attribute
Linus Torvalds [Thu, 14 Jul 2022 19:15:42 +0000 (12:15 -0700)]
Merge tag 'integrity-v5.19-fix' of git://git./linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Here are a number of fixes for recently found bugs.
Only 'ima: fix violation measurement list record' was introduced in
the current release. The rest address existing bugs"
* tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Fix potential memory leak in ima_init_crypto()
ima: force signature verification when CONFIG_KEXEC_SIG is configured
ima: Fix a potential integer overflow in ima_appraise_measurement
ima: fix violation measurement list record
Revert "evm: Fix memleak in init_desc"
Linus Torvalds [Thu, 14 Jul 2022 19:08:59 +0000 (12:08 -0700)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- quieten the spectre-bhb prints
- mark flattened device tree sections as shareable
- remove some obsolete CPU domain code and help text
- fix thumb unaligned access abort emulation
- fix amba_device_add() refcount underflow
- fix literal placement
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9208/1: entry: add .ltorg directive to keep literals in range
ARM: 9207/1: amba: fix refcount underflow if amba_device_add() fails
ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction
ARM: 9213/1: Print message about disabled Spectre workarounds only once
ARM: 9212/1: domain: Modify Kconfig help text
ARM: 9211/1: domain: drop modify_domain()
ARM: 9210/1: Mark the FDT_FIXED sections as shareable
ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle
Guenter Roeck [Thu, 14 Jul 2022 18:46:00 +0000 (11:46 -0700)]
um: Replace to_phys() and to_virt() with less generic function names
The UML function names to_virt() and to_phys() are exposed by UML
headers, and are very generic and may be defined by drivers. As it
turns out, commit
9409c9b6709e ("pmem: refactor pmem_clear_poison()")
did exactly that.
This results in build errors such as the following when trying to build
um:allmodconfig:
drivers/nvdimm/pmem.c: In function ‘pmem_dax_zero_page_range’:
./arch/um/include/asm/page.h:105:20: error: too few arguments to function ‘to_phys’
105 | #define __pa(virt) to_phys((void *) (unsigned long) (virt))
| ^~~~~~~
Use less generic function names for the um specific to_phys() and
to_virt() functions to fix the problem and to avoid similar problems in
the future.
Fixes:
9409c9b6709e ("pmem: refactor pmem_clear_poison()")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 14 Jul 2022 18:34:16 +0000 (11:34 -0700)]
Merge tag 'sound-5.19-rc7' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last one for 5.19. This became bigger than wished, but
all changes are pretty device-specific small fixes, which look less
worrisome.
The majority of changes are about various ASoC fixes, while the usual
HD-audio quirks are included as well"
* tag 'sound-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221
ALSA: hda/realtek: fix mute/micmute LEDs for HP machines
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
ALSA: hda - Add fixup for Dell Latitidue E5430
ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model
ALSA: hda/realtek: Fix headset mic for Acer SF313-51
ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array
ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()
ASoC: rt5640: Fix the wrong state of JD1 and JD2
ASoC: Intel: sof_rt5682: fix out-of-bounds array access
ASoC: qdsp6: fix potential memory leak in q6apm_get_audioreach_graph()
ASoC: tas2764: Fix amp gain register offset & default
ASoC: tas2764: Correct playback volume range
ASoC: tas2764: Fix and extend FSYNC polarity handling
ASoC: tas2764: Add post reset delays
ASoC: dt-bindings: Fix description for msm8916
ASoC: doc: Capitalize RESET line name
ASoC: arizona: Update arizona_aif_cfg_changed to use RX_BCLK_RATE
ASoC: cs47l92: Fix event generation for OUT1 demux
...
Tianyu Yuan [Thu, 14 Jul 2022 08:19:15 +0000 (10:19 +0200)]
nfp: flower: configure tunnel neighbour on cmsg rx
nfp_tun_write_neigh() function will configure a tunnel neighbour when
calling nfp_tun_neigh_event_handler() or nfp_flower_cmsg_process_one_rx()
(with no tunnel neighbour type) from firmware.
When configuring IP on physical port as a tunnel endpoint, no operation
will be performed after receiving the cmsg mentioned above.
Therefore, add a progress to configure tunnel neighbour in this case.
v2: Correct format of fixes tag.
Fixes:
f1df7956c11f ("nfp: flower: rework tunnel neighbour configuration")
Signed-off-by: Tianyu Yuan <tianyu.yuan@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220714081915.148378-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan [Thu, 14 Jul 2022 07:07:54 +0000 (10:07 +0300)]
net/tls: Check for errors in tls_device_init
Add missing error checks in tls_device_init.
Fixes:
e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220714070754.1428-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tom Lendacky [Wed, 13 Jul 2022 22:31:41 +0000 (17:31 -0500)]
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
Add Shyam Sundar S K as an additional maintainer to support the AMD XGBE
network device driver.
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/db367f24089c2bbbcd1cec8e21af49922017a110.1657751501.git.thomas.lendacky@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Juergen Gross [Wed, 13 Jul 2022 13:53:22 +0000 (15:53 +0200)]
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
xenvif_rx_next_skb() is expecting the rx queue not being empty, but
in case the loop in xenvif_rx_action() is doing multiple iterations,
the availability of another skb in the rx queue is not being checked.
This can lead to crashes:
[40072.537261] BUG: unable to handle kernel NULL pointer dereference at
0000000000000080
[40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.537534] PGD 0 P4D 0
[40072.537644] Oops: 0000 [#1] SMP NOPTI
[40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5
[40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021
[40072.537999] task:
ffff880433b38100 task.stack:
ffffc90043d40000
[40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback]
[40072.538217] RSP: e02b:
ffffc90043d43de0 EFLAGS:
00010246
[40072.538319] RAX:
0000000000000000 RBX:
ffffc90043cd7cd0 RCX:
00000000000000f7
[40072.538430] RDX:
0000000000000000 RSI:
0000000000000006 RDI:
ffffc90043d43df8
[40072.538531] RBP:
000000000000003f R08:
000077ff80000000 R09:
0000000000000008
[40072.538644] R10:
0000000000007ff0 R11:
00000000000008f6 R12:
ffffc90043ce2708
[40072.538745] R13:
0000000000000000 R14:
ffffc90043d43ed0 R15:
ffff88043ea748c0
[40072.538861] FS:
0000000000000000(0000) GS:
ffff880484600000(0000) knlGS:
0000000000000000
[40072.538988] CS: e033 DS: 0000 ES: 0000 CR0:
0000000080050033
[40072.539088] CR2:
0000000000000080 CR3:
0000000407ac8000 CR4:
0000000000040660
[40072.539211] Call Trace:
[40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback]
[40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback]
Fix that by stopping the loop in case the rx queue becomes empty.
Cc: stable@vger.kernel.org
Fixes:
98f6d57ced73 ("xen-netback: process guest rx packets in batches")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220713135322.19616-1-jgross@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 13 Jul 2022 19:36:50 +0000 (12:36 -0700)]
amdgpu: disable powerpc support for the newer display engine
The DRM_AMD_DC_DCN display engine support (Raven, Navi, and newer) has
not been building cleanly on powerpc and causes link errors due to
mixing hard- and soft-float object files:
powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float
powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o
[..]
and while patches are floating around, it's not exactly obvious what is
going on.
The problem bisects to commit
41b7a347bf14 ("powerpc: Book3S 64-bit
outline-only KASAN support") but that is probably more about changing
config variables than the fundamental cause.
Despite the bisection result, a more directly related commit seems to be
26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to
dml/dcn31 folder"). It's probably a combination of the two.
This has been going on since the merge window, without any final word.
So instead of blindly applying patches that may or may not be the right
thing, let's disable this for now.
As Michael Ellerman says:
"IIUIC this code was never enabled on ppc before, so disabling it seems
like a reasonable fix to get the build clean"
and once we have more actual feedback (and find any potential users) we
can always re-enable it with the patch that fixes the issues and
back-port as necessary.
Fixes:
41b7a347bf14 ("powerpc: Book3S 64-bit outline-only KASAN support")
Fixes:
26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/20220606153910.GA1773067@roeck-us.net/
Link: https://lore.kernel.org/all/20220618232737.2036722-1-linux@roeck-us.net/
Link: https://lore.kernel.org/all/20220713050724.GA2471738@roeck-us.net/
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Dichtel [Wed, 13 Jul 2022 11:48:53 +0000 (13:48 +0200)]
selftests/net: test nexthop without gw
This test implement the scenario described in the commit
"ip: fix dflt addr selection for connected nexthop".
The test configures a nexthop object with an output device only (no gateway
address) and a route that uses this nexthop. The goal is to check if the
kernel selects a valid source address.
Link: https://lore.kernel.org/netdev/20220712095545.10947-1-nicolas.dichtel@6wind.com/
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220713114853.29406-2-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Nicolas Dichtel [Wed, 13 Jul 2022 11:48:52 +0000 (13:48 +0200)]
ip: fix dflt addr selection for connected nexthop
When a nexthop is added, without a gw address, the default scope was set
to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen
but rejected when the route is used.
When using a route without a nexthop id, the scope can be configured in the
route, thus the problem doesn't exist.
To explain more deeply: when a user creates a nexthop, it cannot specify
the scope. To create it, the function nh_create_ipv4() calls fib_check_nh()
with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was
setting scope to 'host'. Then, nh_create_ipv4() calls
fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is
chosen before the route is inserted.
When a 'standard' route (ie without a reference to a nexthop) is added,
fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by
the user. iproute2 set the scope to 'link' by default.
Here is a way to reproduce the problem:
ip netns add foo
ip -n foo link set lo up
ip netns add bar
ip -n bar link set lo up
sleep 1
ip -n foo link add name eth0 type dummy
ip -n foo link set eth0 up
ip -n foo address add 192.168.0.1/24 dev eth0
ip -n foo link add name veth0 type veth peer name veth1 netns bar
ip -n foo link set veth0 up
ip -n bar link set veth1 up
ip -n bar address add 192.168.1.1/32 dev veth1
ip -n bar route add default dev veth1
ip -n foo nexthop add id 1 dev veth0
ip -n foo route add 192.168.1.1 nhid 1
Try to get/use the route:
> $ ip -n foo route get 192.168.1.1
> RTNETLINK answers: Invalid argument
> $ ip netns exec foo ping -c1 192.168.1.1
> ping: connect: Invalid argument
Try without nexthop group (iproute2 sets scope to 'link' by dflt):
ip -n foo route del 192.168.1.1
ip -n foo route add 192.168.1.1 dev veth0
Try to get/use the route:
> $ ip -n foo route get 192.168.1.1
> 192.168.1.1 dev veth0 src 192.168.0.1 uid 0
> cache
> $ ip netns exec foo ping -c1 192.168.1.1
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
> 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms
>
> --- 192.168.1.1 ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms
CC: stable@vger.kernel.org
Fixes:
597cfe4fc339 ("nexthop: Add support for IPv4 nexthops")
Reported-by: Edwin Brossette <edwin.brossette@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220713114853.29406-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ard Biesheuvel [Tue, 31 May 2022 08:49:24 +0000 (09:49 +0100)]
ARM: 9208/1: entry: add .ltorg directive to keep literals in range
LKP reports a build issue on Clang, related to a literal load of
__current issued through the ldr_va macro. This turns out to be due to
the fact that group relocations are disabled when CONFIG_COMPILE_TEST=y,
which means that the ldr_va macro resolves to a pair of LDR
instructions, the first one being a literal load issued too far from its
literal pool.
Due to the introduction of a couple of new uses of this macro in commit
508074607c7b95b2 ("ARM: 9195/1: entry: avoid explicit literal loads"),
the literal pools end up getting rearranged in a way that causes the
literal for __current to go out of range. Let's fix this up by putting a
.ltorg directive in a suitable place in the code.
Link: https://lore.kernel.org/all/202205290805.1vZLAr36-lkp@intel.com/
Fixes:
508074607c7b95b2 ("ARM: 9195/1: entry: avoid explicit literal loads")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Wang Kefeng [Tue, 24 May 2022 08:03:46 +0000 (09:03 +0100)]
ARM: 9207/1: amba: fix refcount underflow if amba_device_add() fails
"ARM: 9192/1: amba: fix memory leak in amba_device_try_add()" leads
to a refcount underflow if amba_device_add() fails, which called by
of_amba_device_create(), the of_amba_device_create() already exists
the error handling, so amba_put_device() only need to be added into
amba_deferred_retry().
Fixes:
7719a68b2fa4 ("ARM: 9192/1: amba: fix memory leak in amba_device_try_add()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Chia-Lin Kao (AceLan) [Wed, 13 Jul 2022 11:12:24 +0000 (19:12 +0800)]
net: atlantic: remove aq_nic_deinit() when resume
aq_nic_deinit() has been called while suspending, so we don't have to call
it again on resume.
Actually, call it again leads to another hang issue when resuming from
S3.
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992345] Call Trace:
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992346] <TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992348] aq_nic_deinit+0xb4/0xd0 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992356] aq_pm_thaw+0x7f/0x100 [atlantic]
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992362] pci_pm_resume+0x5c/0x90
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992366] ? pci_pm_thaw+0x80/0x80
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992368] dpm_run_callback+0x4e/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992371] device_resume+0xad/0x200
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992373] async_resume+0x1e/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992374] async_run_entry_fn+0x33/0x120
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992377] process_one_work+0x220/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992380] worker_thread+0x4d/0x3f0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992382] ? process_one_work+0x3c0/0x3c0
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992384] kthread+0x12a/0x150
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992386] ? set_kthread_struct+0x40/0x40
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992387] ret_from_fork+0x22/0x30
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992391] </TASK>
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992392] ---[ end trace
1ec8c79604ed5e0d ]---
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992394] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110
Jul 8 03:09:44 u-Precision-7865-Tower kernel: [ 5910.992397] atlantic 0000:02:00.0: PM: failed to resume async: error -110
Fixes:
1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20220713111224.1535938-2-acelan.kao@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chia-Lin Kao (AceLan) [Wed, 13 Jul 2022 11:12:23 +0000 (19:12 +0800)]
net: atlantic: remove deep parameter on suspend/resume functions
Below commit claims that atlantic NIC requires to reset the device on pm
op, and had set the deep to true for all suspend/resume functions.
commit
1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
So, we could remove deep parameter on suspend/resume functions without
any functional change.
Fixes:
1809c30b6e5a ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20220713111224.1535938-1-acelan.kao@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Íñigo Huguet [Wed, 13 Jul 2022 09:21:16 +0000 (11:21 +0200)]
sfc: fix kernel panic when creating VF
When creating VFs a kernel panic can happen when calling to
efx_ef10_try_update_nic_stats_vf.
When releasing a DMA coherent buffer, sometimes, I don't know in what
specific circumstances, it has to unmap memory with vunmap. It is
disallowed to do that in IRQ context or with BH disabled. Otherwise, we
hit this line in vunmap, causing the crash:
BUG_ON(in_interrupt());
This patch reenables BH to release the buffer.
Log messages when the bug is hit:
kernel BUG at mm/vmalloc.c:2727!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1
Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
RIP: 0010:vunmap+0x2e/0x30
...skip...
Call Trace:
__iommu_dma_free+0x96/0x100
efx_nic_free_buffer+0x2b/0x40 [sfc]
efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc]
efx_ef10_update_stats_vf+0x18/0x40 [sfc]
efx_start_all+0x15e/0x1d0 [sfc]
efx_net_open+0x5a/0xe0 [sfc]
__dev_open+0xe7/0x1a0
__dev_change_flags+0x1d7/0x240
dev_change_flags+0x21/0x60
...skip...
Fixes:
d778819609a2 ("sfc: DMA the VF stats only when requested")
Reported-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 14 Jul 2022 10:20:21 +0000 (12:20 +0200)]
Merge branch 'xen-netfront-xsa-403-follow-on'
Jan Beulich says:
====================
xen-netfront: XSA-403 follow-on
While investigating the XSA, I did notice a few more things. The two
patches aren't really dependent on one another.
1: remove leftover call to xennet_tx_buf_gc()
2: re-order error checks in xennet_get_responses()
====================
Link: https://lore.kernel.org/r/7fca0e44-43b5-8448-3653-249d117dc084@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jan Beulich [Wed, 13 Jul 2022 09:19:55 +0000 (11:19 +0200)]
xen-netfront: re-order error checks in xennet_get_responses()
Check the retrieved grant reference first; there's no point trying to
have xennet_move_rx_slot() move invalid data (and further defer
recognition of the issue, likely making diagnosis yet more difficult).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jan Beulich [Wed, 13 Jul 2022 09:19:33 +0000 (11:19 +0200)]
xen-netfront: remove leftover call to xennet_tx_buf_gc()
In talk_to_netback(), called earlier from xennet_connect(), queues and
shared rings were just re-initialized, so all this function call could
result in is setting ->broken (again) right away in case any unconsumed
responses were found.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Paolo Abeni [Thu, 14 Jul 2022 08:15:15 +0000 (10:15 +0200)]
Merge branch 'seg6-fix-skb-checksum-for-srh-encapsulation-insertion'
Andrea Mayer says:
====================
seg6: fix skb checksum for SRH encapsulation/insertion
The Linux kernel supports Segment Routing Header (SRH)
encapsulation/insertion operations by providing the capability to: i)
encapsulate a packet in an outer IPv6 header with a specified SRH; ii)
insert a specified SRH directly after the IPv6 header of the packet.
Note that the insertion operation is also referred to as 'injection'.
The two operations are respectively supported by seg6_do_srh_encap() and
seg6_do_srh_inline(), which operate on the skb associated to the packet as
needed (e.g. adding the necessary headers and initializing them, while
taking care to recalculate the skb checksum).
seg6_do_srh_encap() and seg6_do_srh_inline() do not initialize the payload
length of the IPv6 header, which is carried out by the caller functions.
However, this approach causes the corruption of the skb checksum which
needs to be updated only after initialization of headers is completed
(thanks to Paolo Abeni for detecting this issue).
The patchset fixes the skb checksum corruption by moving the IPv6 header
payload length initialization from the callers of seg6_do_srh_encap() and
seg6_do_srh_inline() directly into these functions.
This patchset is organized as follows:
- patch 1/3, seg6: fix skb checksum evaluation in SRH
encapsulation/insertion;
(* SRH encapsulation/insertion available since v4.10)
- patch 2/3, seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps
behaviors;
(* SRv6 End.B6 and End.B6.Encaps behaviors available since v4.14)
- patch 3/3, seg6: bpf: fix skb checksum in bpf_push_seg6_encap();
(* bpf IPv6 Segment Routing helpers available since v4.18)
====================
Link: https://lore.kernel.org/r/20220712175837.16267-1-andrea.mayer@uniroma2.it
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrea Mayer [Tue, 12 Jul 2022 17:58:37 +0000 (19:58 +0200)]
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
Both helper functions bpf_lwt_seg6_action() and bpf_lwt_push_encap() use
the bpf_push_seg6_encap() to encapsulate the packet in an IPv6 with Segment
Routing Header (SRH) or insert an SRH between the IPv6 header and the
payload.
To achieve this result, such helper functions rely on bpf_push_seg6_encap()
which, in turn, leverages seg6_do_srh_{encap,inline}() to perform the
required operation (i.e. encap/inline).
This patch removes the initialization of the IPv6 header payload length
from bpf_push_seg6_encap(), as it is now handled properly by
seg6_do_srh_{encap,inline}() to prevent corruption of the skb checksum.
Fixes:
fe94cc290f53 ("bpf: Add IPv6 Segment Routing helpers")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrea Mayer [Tue, 12 Jul 2022 17:58:36 +0000 (19:58 +0200)]
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
The SRv6 End.B6 and End.B6.Encaps behaviors rely on functions
seg6_do_srh_{encap,inline}() to, respectively: i) encapsulate the
packet within an outer IPv6 header with the specified Segment Routing
Header (SRH); ii) insert the specified SRH directly after the IPv6
header of the packet.
This patch removes the initialization of the IPv6 header payload length
from the input_action_end_b6{_encap}() functions, as it is now handled
properly by seg6_do_srh_{encap,inline}() to avoid corruption of the skb
checksum.
Fixes:
140f04c33bbc ("ipv6: sr: implement several seg6local actions")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrea Mayer [Tue, 12 Jul 2022 17:58:35 +0000 (19:58 +0200)]
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
Support for SRH encapsulation and insertion was introduced with
commit
6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and
injection with lwtunnels"), through the seg6_do_srh_encap() and
seg6_do_srh_inline() functions, respectively.
The former encapsulates the packet in an outer IPv6 header along with
the SRH, while the latter inserts the SRH between the IPv6 header and
the payload. Then, the headers are initialized/updated according to the
operating mode (i.e., encap/inline).
Finally, the skb checksum is calculated to reflect the changes applied
to the headers.
The IPv6 payload length ('payload_len') is not initialized
within seg6_do_srh_{inline,encap}() but is deferred in seg6_do_srh(), i.e.
the caller of seg6_do_srh_{inline,encap}().
However, this operation invalidates the skb checksum, since the
'payload_len' is updated only after the checksum is evaluated.
To solve this issue, the initialization of the IPv6 payload length is
moved from seg6_do_srh() directly into the seg6_do_srh_{inline,encap}()
functions and before the skb checksum update takes place.
Fixes:
6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/all/20220705190727.69d532417be7438b15404ee1@uniroma2.it
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hariprasad Kelam [Tue, 12 Jul 2022 16:18:15 +0000 (21:48 +0530)]
octeontx2-af: Limit link bringup time at firmware
Set the maximum time firmware should poll for a link.
If not set firmware could block CPU for a long time resulting
in mailbox failures. If link doesn't come up within 1second,
firmware will anyway notify the status as and when LINK comes up
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha Sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20220712161815.12621-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 14 Jul 2022 03:16:03 +0000 (20:16 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-12
This series contains updates to ice driver only.
Paul fixes detection of E822 devices for firmware update and changes NVM
read for snapshot creation to be done in chunks as some systems cannot
read the entire NVM in the allotted time.
====================
Link: https://lore.kernel.org/r/20220712164829.7275-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Íñigo Huguet [Tue, 12 Jul 2022 06:26:42 +0000 (08:26 +0200)]
sfc: fix use after free when disabling sriov
Use after free is detected by kfence when disabling sriov. What was read
after being freed was vf->pci_dev: it was freed from pci_disable_sriov
and later read in efx_ef10_sriov_free_vf_vports, called from
efx_ef10_sriov_free_vf_vswitching.
Set the pointer to NULL at release time to not trying to read it later.
Reproducer and dmesg log (note that kfence doesn't detect it every time):
$ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
$ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224):
efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
efx_ef10_pci_sriov_disable+0x38/0x70 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xfe/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k
allocated by task 6771 on cpu 10 at 3137.860196s:
pci_alloc_dev+0x21/0x60
pci_iov_add_virtfn+0x2a2/0x320
sriov_enable+0x212/0x3e0
efx_ef10_sriov_configure+0x67/0x80 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xba/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
freed by task 6771 on cpu 12 at 3170.991309s:
device_release+0x34/0x90
kobject_cleanup+0x3a/0x130
pci_iov_remove_virtfn+0xd9/0x120
sriov_disable+0x30/0xe0
efx_ef10_pci_sriov_disable+0x57/0x70 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xfe/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes:
3c5eb87605e85 ("sfc: create vports for VFs and assign random MAC addresses")
Reported-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220712062642.6915-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Walle [Tue, 12 Jul 2022 17:00:10 +0000 (19:00 +0200)]
NFC: nxp-nci: add error reporting
The PN7160 supports error notifications. Add the appropriate callbacks.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220712170011.2990629-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steve French [Tue, 12 Jul 2022 05:11:42 +0000 (00:11 -0500)]
smb3: workaround negprot bug in some Samba servers
Mount can now fail to older Samba servers due to a server
bug handling padding at the end of the last negotiate
context (negotiate contexts typically are rounded up to 8
bytes by adding padding if needed). This server bug can
be avoided by switching the order of negotiate contexts,
placing a negotiate context at the end that does not
require padding (prior to the recent netname context fix
this was the case on the client).
Fixes:
73130a7b1ac9 ("smb3: fix empty netname context on secondary channels")
Reported-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Julian Sikorski <belegdol+github@gmail.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Maxim Mikityanskiy [Tue, 12 Apr 2022 18:59:53 +0000 (21:59 +0300)]
net/mlx5e: Remove the duplicating check for striding RQ when enabling LRO
LRO requires striding RQ and checks that it's enabled at two places:
mlx5e_fix_features and set_feature_lro. This commit keeps only one check
at mlx5e_fix_features and removes the duplicating one in
set_feature_lro.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maxim Mikityanskiy [Tue, 12 Apr 2022 18:52:04 +0000 (21:52 +0300)]
net/mlx5e: Move the LRO-XSK check to mlx5e_fix_features
LRO is mutually exclusive with XSK. When LRO is enabled, it checks
whether XSK is active. This commit moves this check to a more correct
place at mlx5e_fix_features.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Tue, 5 Jul 2022 09:39:10 +0000 (11:39 +0200)]
net/mlx5e: Extend flower police validation
Recent net commit
4d1e07d83ccc ("net/mlx5e: Fix matchall police parameters
validation") removed notexceed action id validation from
mlx5e_police_validate() and left it up to callers. However, since
tc_act_can_offload_police() only exists in net-next its validation is
extended in this dedicated followup patch.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Jianbo Liu [Wed, 6 Jul 2022 11:10:45 +0000 (11:10 +0000)]
net/mlx5e: configure meter in flow action
After police action is parsed, set meter data in flow action,
so they can be used when adding FTE.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Rustam Subkhankulov [Mon, 11 Jul 2022 09:33:03 +0000 (12:33 +0300)]
net/mlx5e: Removed useless code in function
Comparison of eth_ft->ft with NULL is useless, because
get_flow_table() returns either pointer 'eth_ft'
such that eth_ft->ft != NULL, or an erroneous value that is
handled on return, causing mlx5e_ethtool_flow_replace()
to terminate before checking whether eth_ft->ft equals NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Fri, 3 Jun 2022 13:32:03 +0000 (16:32 +0300)]
net/mlx5: Bridge, implement QinQ support
Implement support for new 802.1ad VLAN protocol type. Create new flow
groups that handle svlan tags. Create FDB flows with svlan tag match when
bridge VLAN is set to QinQ.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Fri, 3 Jun 2022 19:35:41 +0000 (22:35 +0300)]
net/mlx5: Bridge, implement infrastructure for VLAN protocol change
Current implementation only supports 802.1Q VLAN Ethernet protocol. That
protocol type is assumed by default and
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification is ignored. To prepare
for supporting 802.1ad protocol in following patches implement the
necessary infrastructure to allow the user to dynamically change the VLAN
protocol:
- Handle SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification by flushing
FDB and re-creating VLAN modify header actions with new protocol. In this
patch the only allowed dynamic VLAN protocol value is ETH_P_8021Q.
- Save current VLAN protocol in per-bridge instance variable. Use the
dynamic variable instead of hardcoded values in mlx5 bridge code. Create
VLAN flow groups and flows based on current mlx5_esw_bridge->vlan_proto
value instead of assuming 802.1Q ethertype.
- Extract common flow group creation code into dedicated functions in order
to be reused for creating QinQ groups in following patches.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Fri, 3 Jun 2022 19:32:23 +0000 (22:32 +0300)]
net/mlx5: Bridge, extract VLAN push/pop actions creation
Following patches in series need to re-create VLAN actions when user
changes VLAN protocol. Extract the code that creates VLAN push/pop actions
into dedicated function in order to be reused in next patch.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Fri, 3 Jun 2022 15:23:22 +0000 (18:23 +0300)]
net/mlx5: Bridge, rename filter fg to vlan_filter
Following patches in series introduce new qinq filtering group. To improve
readability rename the existing group in function, variable and definition
names to include "vlan" in order to make it easy to distinguish from
upcoming qinq group.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Thu, 26 May 2022 16:42:04 +0000 (19:42 +0300)]
net/mlx5: Bridge, refactor groups sizes and indices
Following patches in the series introduce additional flow groups for QinQ
support. With increased number of groups it becomes cumbersome to calculate
groups sizes as fractions of the table size. Instead, manually define sizes
of specific group types and ensure that totals are still correct by static
assertions. Having specific table size is important for firmware resource
management.
This commit doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Wed, 8 Jun 2022 04:52:31 +0000 (07:52 +0300)]
net/mlx5: debugfs, Add num of in-use FW command interface slots
Expose the number of busy / in-use slots in the FW command interface via
a read-only debugfs entry. This improves observability and helps in the
performance bottleneck analysis.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Michael Guralnik [Thu, 19 May 2022 09:22:55 +0000 (12:22 +0300)]
net/mlx5: Expose vnic diagnostic counters for eswitch managed vports
Expose on vport group managers debug counters for their managed vports.
Counters are exposed through debugfs, the directory will be present only
for functions that are eswitch managers and only counters that are
supported on their specific HW/FW will be exposed.
Example:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/
pf sf_8 vf_0 vf_1
$ ls -l /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
List of all counter added:
total_q_under_processor_handle - number of queues in error state due to an
async error or errored command.
send_queue_priority_update_flow - number of QP/SQ priority/SL update
events.
cq_overrun - number of times CQ entered an error state due to an
overflow.
async_eq_overrun -number of time an EQ mapped to async events was
overrun.
comp_eq_overrun - number of time an EQ mapped to completion events was
overrun.
quota_exceeded_command - number of commands issued and failed due to quota
exceeded.
invalid_command - number of commands issued and failed dues to any reason
other than quota exceeded.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yishai Hadas [Thu, 2 Jun 2022 09:47:34 +0000 (12:47 +0300)]
net/mlx5: Use software VHCA id when it's supported
Use software VHCA id when it's supported by the firmware.
A unique id is allocated upon mlx5_mdev_init() and freed upon
mlx5_mdev_uninit(), as such it stays the same during the full life cycle
of the device including upon health recovery if occurred.
The conjunction of sw_vhca_id with sw_owner_id will be a global unique
id per function which uses mlx5_core.
The sw_vhca_id is set upon init_hca command and is used to specify the
VHCA that the NIC vport is affiliated with.
This functionality is needed upon migration of VM which is MPV based.
(i.e. multi port device).
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yishai Hadas [Thu, 2 Jun 2022 09:41:00 +0000 (12:41 +0300)]
net/mlx5: Introduce ifc bits for using software vhca id
Introduce ifc related stuff to enable using software vhca id
functionality.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Christophe JAILLET [Sun, 10 Jul 2022 12:36:22 +0000 (14:36 +0200)]
net/mlx5: Use the bitmap API to allocate bitmaps
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Ansgar Lößer [Wed, 13 Jul 2022 18:51:44 +0000 (20:51 +0200)]
vf/remap: return the amount of bytes actually deduplicated
When using the FIDEDUPRANGE ioctl, in case of success the requested size
is returned. In some cases this might not be the actual amount of bytes
deduplicated.
This change modifies vfs_dedupe_file_range() to report the actual amount
of bytes deduplicated, instead of the requested amount.
Link: https://lore.kernel.org/linux-fsdevel/5548ef63-62f9-4f46-5793-03165ceccacc@tu-darmstadt.de/
Reported-by: Ansgar Lößer <ansgar.loesser@kom.tu-darmstadt.de>
Reported-by: Max Schlecht <max.schlecht@informatik.hu-berlin.de>
Reported-by: Björn Scheuermann <scheuermann@kom.tu-darmstadt.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Darrick J Wong <djwong@kernel.org>
Signed-off-by: Ansgar Lößer <ansgar.loesser@kom.tu-darmstadt.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 13 Jul 2022 18:47:01 +0000 (11:47 -0700)]
Merge tag 'cgroup-for-5.19-rc6-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Fix an old and subtle bug in the migration path.
css_sets are used to track tasks and migrations are tasks moving from
a group of css_sets to another group of css_sets. The migration path
pins all source and destination css_sets in the prep stage.
Unfortunately, it was overloading the same list_head entry to track
sources and destinations, which got confused for migrations which are
partially identity leading to use-after-frees.
Fixed by using dedicated list_heads for tracking sources and
destinations"
* tag 'cgroup-for-5.19-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Use separate src/dst nodes when preloading css_sets for migration
Dave Chinner [Wed, 13 Jul 2022 07:49:15 +0000 (17:49 +1000)]
fs/remap: constrain dedupe of EOF blocks
If dedupe of an EOF block is not constrainted to match against only
other EOF blocks with the same EOF offset into the block, it can
match against any other block that has the same matching initial
bytes in it, even if the bytes beyond EOF in the source file do
not match.
Fix this by constraining the EOF block matching to only match
against other EOF blocks that have identical EOF offsets and data.
This allows "whole file dedupe" to continue to work without allowing
eof blocks to randomly match against partial full blocks with the
same data.
Reported-by: Ansgar Lößer <ansgar.loesser@tu-darmstadt.de>
Fixes:
1383a7ed6749 ("vfs: check file ranges before cloning files")
Link: https://lore.kernel.org/linux-fsdevel/a7c93559-4ba1-df2f-7a85-55a143696405@tu-darmstadt.de/
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jianglei Nie [Tue, 12 Jul 2022 01:10:37 +0000 (09:10 +0800)]
ima: Fix potential memory leak in ima_init_crypto()
On failure to allocate the SHA1 tfm, IMA fails to initialize and exits
without freeing the ima_algo_array. Add the missing kfree() for
ima_algo_array to avoid the potential memory leak.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Fixes:
6d94809af6b0 ("ima: Allocate and initialize tfm for each PCR bank")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Coiby Xu [Wed, 13 Jul 2022 07:21:11 +0000 (15:21 +0800)]
ima: force signature verification when CONFIG_KEXEC_SIG is configured
Currently, an unsigned kernel could be kexec'ed when IMA arch specific
policy is configured unless lockdown is enabled. Enforce kernel
signature verification check in the kexec_file_load syscall when IMA
arch specific policy is configured.
Fixes:
99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE")
Reported-and-suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Nick Bowler [Wed, 13 Jul 2022 01:58:35 +0000 (21:58 -0400)]
net: sunhme: output link status with a single print.
This driver currently prints the link status using four separate
printk calls, which these days gets presented to the user as four
distinct messages, not exactly ideal:
[ 32.582778] eth0: Link is up using
[ 32.582828] internal
[ 32.582837] transceiver at
[ 32.582888] 100Mb/s, Full Duplex.
Restructure the display_link_mode function to use a single netdev_info
call to present all this information as a single message, which is much
nicer:
[ 33.640143] hme 0000:00:01.1 eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.
The display_forced_link_mode function has a similar structure, so adjust
it in a similar fashion.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Wed, 13 Jul 2022 03:31:11 +0000 (11:31 +0800)]
r8152: fix accessing unset transport header
A warning is triggered by commit
66e4c8d95008 ("net: warn if transport
header was not set"). The warning is harmless, because the value from
skb_transport_offset() is only used for skb_is_gso() is true or the
skb->ip_summed is equal to CHECKSUM_PARTIAL.
Fixes:
66e4c8d95008 ("net: warn if transport header was not set")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebin Sebastian [Wed, 13 Jul 2022 07:38:58 +0000 (13:08 +0530)]
octeontx2-af: returning uninitialized variable
Fix coverity error 'use of uninitialized variable'. err is uninitialized
and is returned which can lead to unintended results. err has been replaced
with -einval.
Coverity issue: 1518921 (uninitialized scalar variable)
Signed-off-by: Sebin Sebastian <mailmesebin00@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiapeng Chong [Wed, 13 Jul 2022 02:07:59 +0000 (10:07 +0800)]
octeontx2-af: Remove duplicate include
The include is in line 14 and 23. Remove the duplicate.
Fix following checkincludes warning:
./drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c: linux/bitfield.h is included more than once.
./drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c: rvu_npc_hash.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Wed, 13 Jul 2022 01:54:38 +0000 (09:54 +0800)]
net/sched: remove return value of unregister_tcf_proto_ops
Return value of unregister_tcf_proto_ops is unused, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Jul 2022 13:28:52 +0000 (14:28 +0100)]
Merge tag 'wireless-next-2022-07-13' of git://git./linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
A fairly large set of updates for next, highlights:
ath10k
* ethernet frame format support
rtw89
* TDLS support
cfg80211/mac80211
* airtime fairness fixes
* EHT support continued, especially in AP mode
* initial (and still major) rework for multi-link
operation (MLO) from 802.11be/wifi 7
As usual, also many small updates/cleanups/fixes/etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-rpi.git / log