review.tizen.org Git - platform/kernel/linux-starfive.git/log

smack: Remove redundant assignments

Get rid of redundant assignments which end up in values not being
read either because they are overwritten or the function ends.

Reported by clang-tidy [deadcode.DeadStores]

Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

Linux 5.18

afs: Fix afs_getattr() to refetch file status if callback break occurred

If a callback break occurs (change notification), afs_getattr() needs to
issue an FS.FetchStatus RPC operation to update the status of the file
being examined by the stat-family of system calls.

Fix afs_getattr() to do this if AFS_VNODE_CB_PROMISED has been cleared
on a vnode by a callback break.  Skip this if AT_STATX_DONT_SYNC is set.

This can be tested by appending to a file on one AFS client and then
using "stat -L" to examine its length on a machine running kafs.  This
can also be watched through tracing on the kafs machine.  The callback
break is seen:

     kworker/1:1-46      [001] .....   978.910812: afs_cb_call: c=0000005f YFSCB.CallBack
     kworker/1:1-46      [001] ...1.   978.910829: afs_cb_break: 100058:23b4c:242d2c2 b=2 s=1 break-cb
     kworker/1:1-46      [001] .....   978.911062: afs_call_done:    c=0000005f ret=0 ab=0 [0000000082994ead]

And then the stat command generated no traffic if unpatched, but with
this change a call to fetch the status can be observed:

            stat-4471    [000] .....   986.744122: afs_make_fs_call: c=000000ab 100058:023b4c:242d2c2 YFS.FetchStatus
            stat-4471    [000] .....   986.745578: afs_call_done:    c=000000ab ret=0 ab=0 [0000000087fc8c84]

Fixes: 08e0e7c82eea ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
Tested-by: kafs-testing+fedora34_64checkkafs-build-496@auristor.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216010
Link: https://lore.kernel.org/r/165308359800.162686.14122417881564420962.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"Some I2C driver bugfixes for 5.18. Nothing spectacular but worth
  fixing"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()

Merge tag 'perf-tools-fixes-for-v5.18-2022-05-21' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events
   in 'perf stat'.

- Fix x86's arch__intr_reg_mask() for the hybrid platform.

- Address 'perf bench numa' compiler error on s390.

- Fix check for btf__load_from_kernel_by_id() in libbpf.

- Fix "all PMU test" 'perf test' to skip hv_24x7/hv_gpci tests on
   powerpc.

- Fix session topology test to skip the test in guest environment.

- Skip BPF 'perf test' if clang is not present.

- Avoid shell test description infinite loop in 'perf test'.

- Fix Intel LBR callstack entries and nr print message.

* tag 'perf-tools-fixes-for-v5.18-2022-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf session: Fix Intel LBR callstack entries and nr print message
  perf test bpf: Skip test if clang is not present
  perf test session topology: Fix test to skip the test in guest environment
  perf bench numa: Address compiler error on s390
  perf test: Avoid shell test description infinite loop
  perf regs x86: Fix arch__intr_reg_mask() for the hybrid platform
  perf test: Fix "all PMU test" to skip hv_24x7/hv_gpci tests on powerpc
  perf stat: Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events
  perf build: Fix check for btf__load_from_kernel_by_id() in libbpf

Merge tag 'input-for-v5.18-rc7' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
"A small fixup to ili210x touchscreen driver, and updated maintainer
  entry for the device tree binding of Mediatek 6779 keypad:

   - fix reset timing of Ilitek touchscreens

   - update maintainer entry of DT binding of Mediatek 6779 keypad"

* tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ili210x - use one common reset implementation
  Input: ili210x - fix reset timing
  dt-bindings: input: mediatek,mt6779-keypad: update maintainer

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.

  The iscsi one is fixing the cpumask issue you commented on and the ufs
  one is a late arriving fix for conditions that can occur in Host
  Performance Booster reads"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix referencing invalid rsp field
  scsi: target: Fix incorrect use of cpumask_t

perf session: Fix Intel LBR callstack entries and nr print message

When generating callstack information from branch_stack(Intel LBR), the
actual number of callstack entry should be bigger than the number of
branch_stack, for example:

branch_stack records:
B() -> C()
A() -> B()
converted callstack records should be:
C()
B()
A()
though, the number of callstack equals
to the number of branch stack plus 1.

This patch fixes above issue in branch_stack__printf(). For example,

# echo 'scale=2000; 4*a(1)' > cmd
# perf record --call-graph lbr bc -l < cmd

Before applying this patch, `perf script -D` output:

1220022677386876 0x2a40 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x4002): 17990/17990: 0x40a6d6 period: 894172 addr: 0
... LBR call chain: nr:8
.....  0: fffffffffffffe00
.....  1: 000000000040a410
.....  2: 000000000040573c
.....  3: 0000000000408650
.....  4: 00000000004022f2
.....  5: 00000000004015f5
.....  6: 00007f5ed6dcb553
.....  7: 0000000000401698
... FP chain: nr:2
.....  0: fffffffffffffe00
.....  1: 000000000040a6d8
... branch callstack: nr:6    # which is not consistent with LBR records.
.....  0: 000000000040a410
.....  1: 0000000000408650    # ditto
.....  2: 00000000004022f2
.....  3: 00000000004015f5
.....  4: 00007f5ed6dcb553
.....  5: 0000000000401698
... thread: bc:17990
...... dso: /usr/bin/bc
bc 17990 1220022.677386:     894172 cycles:
  40a410 [unknown] (/usr/bin/bc)
  40573c [unknown] (/usr/bin/bc)
  408650 [unknown] (/usr/bin/bc)
  4022f2 [unknown] (/usr/bin/bc)
  4015f5 [unknown] (/usr/bin/bc)
    7f5ed6dcb553 __libc_start_main+0xf3 (/usr/lib64/libc-2.17.so)
  401698 [unknown] (/usr/bin/bc)

After applied:

1220022677386876 0x2a40 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x4002): 17990/17990: 0x40a6d6 period: 894172 addr: 0
... LBR call chain: nr:8
.....  0: fffffffffffffe00
.....  1: 000000000040a410
.....  2: 000000000040573c
.....  3: 0000000000408650
.....  4: 00000000004022f2
.....  5: 00000000004015f5
.....  6: 00007f5ed6dcb553
.....  7: 0000000000401698
... FP chain: nr:2
.....  0: fffffffffffffe00
.....  1: 000000000040a6d8
... branch callstack: nr:7
.....  0: 000000000040a410
.....  1: 000000000040573c
.....  2: 0000000000408650
.....  3: 00000000004022f2
.....  4: 00000000004015f5
.....  5: 00007f5ed6dcb553
.....  6: 0000000000401698
... thread: bc:17990
...... dso: /usr/bin/bc
bc 17990 1220022.677386:     894172 cycles:
  40a410 [unknown] (/usr/bin/bc)
  40573c [unknown] (/usr/bin/bc)
  408650 [unknown] (/usr/bin/bc)
  4022f2 [unknown] (/usr/bin/bc)
  4015f5 [unknown] (/usr/bin/bc)
    7f5ed6dcb553 __libc_start_main+0xf3 (/usr/lib64/libc-2.17.so)
  401698 [unknown] (/usr/bin/bc)

Change from v1:
- refined code style according to Jiri's review comments.

Signed-off-by: Chengdong Li <chengdongli@tencent.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: likexu@tencent.com
Link: https://lore.kernel.org/r/20220517015726.96131-1-chengdongli@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test bpf: Skip test if clang is not present

Perf BPF filter test fails in environment where "clang" is not
installed.

Test failure logs:

<<>>
42: BPF filter                    :
42.1: Basic BPF filtering         : Skip
42.2: BPF pinning                 : FAILED!
42.3: BPF prologue generation     : FAILED!
<<>>

Enabling verbose option provided debug logs which says clang/llvm needs
to be installed. Snippet of verbose logs:

<<>>
42.2: BPF pinning                  :
--- start ---
test child forked, pid 61423
ERROR: unable to find clang.
Hint: Try to install latest clang/llvm to support BPF.
        Check your $PATH

<<logs_here>>

Failed to compile test case: 'Basic BPF llvm compile'
Unable to get BPF object, fix kbuild first
test child finished with -1
---- end ----
BPF filter subtest 2: FAILED!
<<>>

Here subtests, "BPF pinning" and "BPF prologue generation" failed and
logs shows clang/llvm is needed. After installing clang, testcase
passes.

Reason on why subtest failure happens though logs has proper debug
information:

Main function __test__bpf calls test_llvm__fetch_bpf_obj by
passing 4th argument as true ( 4th arguments maps to parameter
"force" in test_llvm__fetch_bpf_obj ). But this will cause
test_llvm__fetch_bpf_obj to skip the check for clang/llvm.

Snippet of code part which checks for clang based on
parameter "force" in test_llvm__fetch_bpf_obj:

<<>>
if (!force && (!llvm_param.user_set_param &&
<<>>

Since force is set to "false", test won't get skipped and fails to
compile test case. The BPF code compilation needs clang, So pass the
fourth argument as "false" and also skip the test if reason for return
is "TEST_SKIP"

After the patch:

<<>>
42: BPF filter                    :
42.1: Basic BPF filtering         : Skip
42.2: BPF pinning                 : Skip
42.3: BPF prologue generation     : Skip
<<>>

Fixes: ba1fae431e74bb42 ("perf test: Add 'perf test BPF'")
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lore.kernel.org/r/20220511115438.84032-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test session topology: Fix test to skip the test in guest environment

The session topology test fails in powerpc pSeries platform.

Test logs:

  <<>>
  Session topology : FAILED!
  <<>>

This testcases tests cpu topology by checking the core_id and socket_id
stored in perf_env from perf session. The data from perf session is
compared with the cpu topology information from
"/sys/devices/system/cpu/cpuX/topology" like core_id,
physical_package_id.

In case of virtual environment, detail like physical_package_id is
restricted to be exposed. Hence physical_package_id is set to -1. The
testcase fails on such platforms since socket_id can't be fetched from
topology info.

Skip the testcase in powerpc if physical_package_id returns -1.

Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>---
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220511114959.84002-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bench numa: Address compiler error on s390

The compilation on s390 results in this error:

  # make DEBUG=y bench/numa.o
  ...
  bench/numa.c: In function ‘__bench_numa’:
  bench/numa.c:1749:81: error: ‘%d’ directive output may be truncated
              writing between 1 and 11 bytes into a region of size between
              10 and 20 [-Werror=format-truncation=]
  1749 |        snprintf(tname, sizeof(tname), "process%d:thread%d", p, t);
                                                               ^~
  ...
  bench/numa.c:1749:64: note: directive argument in the range
                 [-2147483647, 2147483646]
  ...
  #

The maximum length of the %d replacement is 11 characters because of the
negative sign.  Therefore extend the array by two more characters.

Output after:

  # make  DEBUG=y bench/numa.o > /dev/null 2>&1; ll bench/numa.o
  -rw-r--r-- 1 root root 418320 May 19 09:11 bench/numa.o
  #

Fixes: 3aff8ba0a4c9c919 ("perf bench numa: Avoid possible truncation when using snprintf()")
Suggested-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520081158.2990006-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Avoid shell test description infinite loop

for_each_shell_test() is already strict in expecting tests to be files
and executable. It is sometimes possible when it iterates over all files
that it finds one that is executable and lacks a newline character. When
this happens the loop never terminates as it doesn't check for EOF.

Add the EOF check to make this loop at least bounded by the file size.

If the description is returned as NULL then also skip the test.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220517204144.645913-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf regs x86: Fix arch__intr_reg_mask() for the hybrid platform

The X86 specific arch__intr_reg_mask() is to check whether the kernel
and hardware can collect XMM registers. But it doesn't work on some
hybrid platform.

Without the patch on ADL-N:

  $ perf record -I?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
  R11 R12 R13 R14 R15

The config of the test event doesn't contain the PMU information. The
kernel may fail to initialize it on the correct hybrid PMU and return
the wrong non-supported information.

Add the PMU information into the config for the hybrid platform. The
same register set is supported among different hybrid PMUs. Checking
the first available one is good enough.

With the patch on ADL-N:

  $ perf record -I?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
  R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9
  XMM10 XMM11 XMM12 XMM13 XMM14 XMM15

Fixes: 6466ec14aaf44ff1 ("perf regs x86: Add X86 specific arch__intr_reg_mask()")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518145125.1494156-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Fix "all PMU test" to skip hv_24x7/hv_gpci tests on powerpc

"perf all PMU test" picks the input events from "perf list --raw-dump
pmu" list and runs "perf stat -e" for each of the event in the list. In
case of powerpc, the PowerVM environment supports events from hv_24x7
and hv_gpci PMU which is of example format like below:

- hv_24x7/CPM_ADJUNCT_INST,domain=?,core=?/
- hv_gpci/event,partition_id=?/

The value for "?" needs to be filled in depending on system and
respective event. CPM_ADJUNCT_INST needs have core value and domain
value. hv_gpci event needs partition_id. Similarly, there are other
events for hv_24x7 and hv_gpci having "?" in event format. Hence skip
these events on powerpc platform since values like partition_id, domain
is specific to system and event.

Fixes: 3d5ac9effcc640d5 ("perf test: Workload test of all PMUs")
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520101236.17249-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers

Due to i2c->adap.dev.fwnode not being set, ACPI_COMPANION() wasn't properly
found for TWSI controllers.

Signed-off-by: Szymon Balcerak <sbalcerak@marvell.com>
Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging

Before sending a MSI the hardware writes information pertinent to the
interrupt cause to a memory location pointed by SMTICL register. This
memory holds three double words where the least significant bit tells
whether the interrupt cause of master/target/error is valid. The driver
does not use this but we need to set it up because otherwise it will
perform DMA write to the default address (0) and this will cause an
IOMMU fault such as below:

  DMAR: DRHD: handling fault status reg 2
  DMAR: [DMA Write] Request device [00:12.0] PASID ffffffff fault addr 0
        [fault reason 05] PTE Write access is not set

To prevent this from happening, provide a proper DMA buffer for this
that then gets mapped by the IOMMU accordingly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()

Fix the missing clk_disable_unprepare() before return
from mtk_i2c_probe() in the error handling case.

Fixes: d04913ec5f89 ("i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"ARM:

   - Correctly expose GICv3 support even if no irqchip is created so
     that userspace doesn't observe it changing pointlessly (fixing a
     regression with QEMU)

   - Don't issue a hypercall to set the id-mapped vectors when protected
     mode is enabled (fix for pKVM in combination with CPUs affected by
     Spectre-v3a)

  x86 (five oneliners, of which the most interesting two are):

   - a NULL pointer dereference on INVPCID executed with paging
     disabled, but only if KVM is using shadow paging

   - an incorrect bsearch comparison function which could truncate the
     result and apply PMU event filtering incorrectly. This one comes
     with a selftests update too"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/mmu: fix NULL pointer dereference on guest INVPCID
  KVM: x86: hyper-v: fix type of valid_bank_mask
  KVM: Free new dirty bitmap if creating a new memslot fails
  KVM: eventfd: Fix false positive RCU usage warning
  selftests: kvm/x86: Verify the pmu event filter matches the correct event
  selftests: kvm/x86: Add the helper function create_pmu_event_filter
  kvm: x86/pmu: Fix the compare function used by the pmu event filter
  KVM: arm64: Don't hypercall before EL2 init
  KVM: arm64: vgic-v3: Consistently populate ID_AA64PFR0_EL1.GIC
  KVM: x86/mmu: Update number of zapped pages even if page list is stable

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Three clk driver fixes to close out the release

   - Fix a divider calculation breaking boot on Broadcom bcm2835

   - Fix HDMI output on Tanix TX6 mini board by reverting a patch

   - Fix clk_set_rate_range() calls on at91 by considering the range
     while calculating the divisor"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: at91: generated: consider range when calculating best rate
  Revert "clk: sunxi-ng: sun6i-rtc: Add support for H6"
  clk: bcm2835: fix bcm2835_clock_choose_div

Merge tag 'drm-fixes-2022-05-21' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Few final fixes for 5.18, one amdgpu, core dp mst leak fix, dma-buf
  two fixes, and i915 has a few fixes, one for a regression on older
  GM45 chipsets,

  dma-buf:
   - ioctl userspace use fix
   - fix dma-buf sysfs name generation

  core:
   - dp/mst leak fix

  amdgpu:
   - suspend/resume regression fix

  i915:
   - fix for #5806: GPU hangs and display artifacts on Intel GM45
   - reject DMC with out-of-spec MMIO
   - correctly mark guilty contexts on GuC reset"

* tag 'drm-fixes-2022-05-21' of git://anongit.freedesktop.org/drm/drm:
  drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomap
  drm/amd: Don't reset dGPUs if the system is going to s2idle
  drm/dp/mst: fix a possible memory leak in fetch_monitor_name()
  dma-buf: fix use of DMA_BUF_SET_NAME_{A,B} in userspace
  i915/guc/reset: Make __guc_reset_context aware of guilty engines
  drm/i915/dmc: Add MMIO range restrictions
  dma-buf: ensure unique directory name for dmabuf stats

Merge tag 'drm-intel-fixes-2022-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- fix for #5806: GPU hangs and display artifacts on 5.18-rc3 on Intel GM45
- reject DMC with out-of-spec MMIO (Cc: stable)
- correctly mark guilty contexts on GuC reset.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YocqqvG6PbYx3QgJ@jlahtine-mobl.ger.corp.intel.com

Merge tag 'drm-misc-fixes-2022-05-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Fix for a memory leak in dp_mst, a (userspace) build fix for
DMA_BUF_SET_NAME defines and a directory name generation fix for dmabuf
stats

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520072408.cpjzy2taugagvrh7@houat

perf: Fix sys_perf_event_open() race against self

Norbert reported that it's possible to race sys_perf_event_open() such
that the looser ends up in another context from the group leader,
triggering many WARNs.

The move_group case checks for races against itself, but the
!move_group case doesn't, seemingly relying on the previous
group_leader->ctx == ctx check. However, that check is racy due to not
holding any locks at that time.

Therefore, re-check the result after acquiring locks and bailing
if they no longer match.

Additionally, clarify the not_move_group case from the
move_group-vs-move_group race.

Fixes: f63a8daa5812 ("perf: Fix event->ctx locking")
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'gpio-fixes-for-v5.18' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

- fix bitops logic in gpio-vf610

- return an error if the user tries to use inverted polarity in
   gpio-mvebu

* tag 'gpio-fixes-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mvebu/pwm: Refuse requests with inverted polarity
  gpio: gpio-vf610: do not touch other bits when set the target bit

Merge tag 'mmc-v5.18-rc4-2' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fix from Ulf Hansson:
"MMC core:

- Fix busy polling for MMC_SEND_OP_COND again"

* tag 'mmc-v5.18-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Fix busy polling for MMC_SEND_OP_COND again

Merge tag 'ceph-for-5.18-rc8' of https://github.com/ceph/ceph-client

Pull ceph fix from Ilya Dryomov:
"A fix for a nasty use-after-free, marked for stable"

* tag 'ceph-for-5.18-rc8' of https://github.com/ceph/ceph-client:
libceph: fix misleading ceph_osdc_cancel_request() comment
libceph: fix potential use-after-free on linger ping and resends

Merge tag 'riscv-for-linus-5.18-rc8' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- fix the fu540-c000 device tree to avoid a schema check failure on the
   DMA node name

- fix typo in the PolarFire SOC device tree

* tag 'riscv-for-linus-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: dts: microchip: fix gpio1 reg property typo
  riscv: dts: sifive: fu540-c000: align dma node name with dtschema

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc8/final.

  The MTE and stolen time fixes have been doing the rounds for a little
  while, but review and testing feedback was ongoing until earlier this
  week. The kexec fix showed up on Monday and addresses a failure
  observed under Qemu.

  Summary:

   - Add missing write barrier to publish MTE tags before a pte update

   - Fix kexec relocation clobbering its own data structures

   - Fix stolen time crash if a timer IRQ fires during CPU hotplug"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mte: Ensure the cleared tags are visible before setting the PTE
  arm64: kexec: load from kimage prior to clobbering
  arm64: paravirt: Use RCU read locks to guard stolen_time

KVM: x86/mmu: fix NULL pointer dereference on guest INVPCID

With shadow paging enabled, the INVPCID instruction results in a call
to kvm_mmu_invpcid_gva.  If INVPCID is executed with CR0.PG=0, the
invlpg callback is not set and the result is a NULL pointer dereference.
Fix it trivially by checking for mmu->invlpg before every call.

There are other possibilities:

- check for CR0.PG, because KVM (like all Intel processors after P5)
  flushes guest TLB on CR0.PG changes so that INVPCID/INVLPG are a
  nop with paging disabled

- check for EFER.LMA, because KVM syncs and flushes when switching
  MMU contexts outside of 64-bit mode

All of these are tricky, go for the simple solution.  This is CVE-2022-1789.

Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: hyper-v: fix type of valid_bank_mask

In kvm_hv_flush_tlb(), valid_bank_mask is declared as unsigned long,
but is used as u64, which is wrong for i386, and has been spotted by
LKP after applying "KVM: x86: hyper-v: replace bitmap_weight() with
hweight64()"

https://lore.kernel.org/lkml/20220510154750.212913-12-yury.norov@gmail.com/

But it's wrong even without that patch because now bitmap_weight()
dereferences a word after valid_bank_mask on i386.

>> include/asm-generic/bitops/const_hweight.h:21:76: warning: right shift count >= width of type
+[-Wshift-count-overflow]
      21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
         |                                                                            ^~
   include/asm-generic/bitops/const_hweight.h:10:16: note: in definition of macro '__const_hweight8'
      10 |          ((!!((w) & (1ULL << 0))) +     \
         |                ^
   include/asm-generic/bitops/const_hweight.h:20:31: note: in expansion of macro '__const_hweight16'
      20 | #define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16))
         |                               ^~~~~~~~~~~~~~~~~
   include/asm-generic/bitops/const_hweight.h:21:54: note: in expansion of macro '__const_hweight32'
      21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
         |                                                      ^~~~~~~~~~~~~~~~~
   include/asm-generic/bitops/const_hweight.h:29:49: note: in expansion of macro '__const_hweight64'
      29 | #define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w))
         |                                                 ^~~~~~~~~~~~~~~~~
   arch/x86/kvm/hyperv.c:1983:36: note: in expansion of macro 'hweight64'
    1983 |                 if (hc->var_cnt != hweight64(valid_bank_mask))
         |                                    ^~~~~~~~~

CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: Jim Mattson <jmattson@google.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Sean Christopherson <seanjc@google.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
CC: Wanpeng Li <wanpengli@tencent.com>
CC: kvm@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: x86@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Message-Id: <20220519171504.1238724-1-yury.norov@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: Free new dirty bitmap if creating a new memslot fails

Fix a goof in kvm_prepare_memory_region() where KVM fails to free the
new memslot's dirty bitmap during a CREATE action if
kvm_arch_prepare_memory_region() fails.  The logic is supposed to detect
if the bitmap was allocated and thus needs to be freed, versus if the
bitmap was inherited from the old memslot and thus needs to be kept.  If
there is no old memslot, then obviously the bitmap can't have been
inherited

The bug was exposed by commit 86931ff7207b ("KVM: x86/mmu: Do not create
SPTEs for GFNs that exceed host.MAXPHYADDR"), which made it trivally easy
for syzkaller to trigger failure during kvm_arch_prepare_memory_region(),
but the bug can be hit other ways too, e.g. due to -ENOMEM when
allocating x86's memslot metadata.

The backtrace from kmemleak:

  __vmalloc_node_range+0xb40/0xbd0 mm/vmalloc.c:3195
  __vmalloc_node mm/vmalloc.c:3232 [inline]
  __vmalloc+0x49/0x50 mm/vmalloc.c:3246
  __vmalloc_array mm/util.c:671 [inline]
  __vcalloc+0x49/0x70 mm/util.c:694
  kvm_alloc_dirty_bitmap virt/kvm/kvm_main.c:1319
  kvm_prepare_memory_region virt/kvm/kvm_main.c:1551
  kvm_set_memslot+0x1bd/0x690 virt/kvm/kvm_main.c:1782
  __kvm_set_memory_region+0x689/0x750 virt/kvm/kvm_main.c:1949
  kvm_set_memory_region virt/kvm/kvm_main.c:1962
  kvm_vm_ioctl_set_memory_region virt/kvm/kvm_main.c:1974
  kvm_vm_ioctl+0x377/0x13a0 virt/kvm/kvm_main.c:4528
  vfs_ioctl fs/ioctl.c:51
  __do_sys_ioctl fs/ioctl.c:870
  __se_sys_ioctl fs/ioctl.c:856
  __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
  do_syscall_x64 arch/x86/entry/common.c:50
  do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x44/0xae

And the relevant sequence of KVM events:

  ioctl(3, KVM_CREATE_VM, 0)              = 4
  ioctl(4, KVM_SET_USER_MEMORY_REGION, {slot=0,
                                        flags=KVM_MEM_LOG_DIRTY_PAGES,
                                        guest_phys_addr=0x10000000000000,
                                        memory_size=4096,
                                        userspace_addr=0x20fe8000}
       ) = -1 EINVAL (Invalid argument)

Fixes: 244893fa2859 ("KVM: Dynamically allocate "new" memslots from the get-go")
Cc: stable@vger.kernel.org
Reported-by: syzbot+8606b8a9cc97a63f1c87@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220518003842.1341782-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

gpio: mvebu/pwm: Refuse requests with inverted polarity

The driver doesn't take struct pwm_state::polarity into account when
configuring the hardware, so refuse requests for inverted polarity.

Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio: gpio-vf610: do not touch other bits when set the target bit

For gpio controller contain register PDDR, when set one target bit,
current logic will clear all other bits, this is wrong. Use operator
'|=' to fix it.

Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

perf stat: Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events

Stat events can come from disk and so need a degree of validation. They
contain a CPU which needs looking up via CPU map to access a counter.

Add the CPU to index translation, alongside validity checking.

Discussion thread:

https://lore.kernel.org/linux-perf-users/CAP-5=fWQR=sCuiSMktvUtcbOLidEpUJLCybVF6=BRvORcDOq+g@mail.gmail.com/

Fixes: 7ac0089d138f80dc ("perf evsel: Pass cpu not cpu map index to synthesize")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Suggested-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lv Ruyi <lv.ruyi@zte.com.cn>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220519032005.1273691-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

KVM: eventfd: Fix false positive RCU usage warning

The splat below can be seen when running kvm-unit-test:

     =============================
     WARNING: suspicious RCU usage
     5.18.0-rc7 #5 Tainted: G          IOE
     -----------------------------
     /home/kernel/linux/arch/x86/kvm/../../../virt/kvm/eventfd.c:80 RCU-list traversed in non-reader section!!

     other info that might help us debug this:

     rcu_scheduler_active = 2, debug_locks = 1
     4 locks held by qemu-system-x86/35124:
      #0: ffff9725391d80b8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x710 [kvm]
      #1: ffffbd25cfb2a0b8 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0xdeb/0x1900 [kvm]
      #2: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: kvm_hv_notify_acked_sint+0x79/0x1e0 [kvm]
      #3: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: irqfd_resampler_ack+0x5/0x110 [kvm]

     stack backtrace:
     CPU: 2 PID: 35124 Comm: qemu-system-x86 Tainted: G          IOE     5.18.0-rc7 #5
     Call Trace:
      <TASK>
      dump_stack_lvl+0x6c/0x9b
      irqfd_resampler_ack+0xfd/0x110 [kvm]
      kvm_notify_acked_gsi+0x32/0x90 [kvm]
      kvm_hv_notify_acked_sint+0xc5/0x1e0 [kvm]
      kvm_hv_set_msr_common+0xec1/0x1160 [kvm]
      kvm_set_msr_common+0x7c3/0xf60 [kvm]
      vmx_set_msr+0x394/0x1240 [kvm_intel]
      kvm_set_msr_ignored_check+0x86/0x200 [kvm]
      kvm_emulate_wrmsr+0x4f/0x1f0 [kvm]
      vmx_handle_exit+0x6fb/0x7e0 [kvm_intel]
      vcpu_enter_guest+0xe5a/0x1900 [kvm]
      kvm_arch_vcpu_ioctl_run+0x16e/0xac0 [kvm]
      kvm_vcpu_ioctl+0x279/0x710 [kvm]
      __x64_sys_ioctl+0x83/0xb0
      do_syscall_64+0x3b/0x90
      entry_SYSCALL_64_after_hwframe+0x44/0xae

resampler-list is protected by irq_srcu (see kvm_irqfd_assign), so fix
the false positive by using list_for_each_entry_srcu().

Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1652950153-12489-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

perf build: Fix check for btf__load_from_kernel_by_id() in libbpf

Avi Kivity reported a problem where the __weak
btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being
used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in
turn called back to btf__load_from_kernel_by_id(), resulting in an
endless loop.

Fix this by adding a feature test to check if
btf__load_from_kernel_by_id() is available when building perf with
LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old
btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id()
since at that time it didn't exist at all.

Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC
where we don't have btf__load_from_kernel_by_id() and thus its feature
test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID:

  $ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output
  test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’:
  test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration]
      6 |         return btf__load_from_kernel_by_id(20151128, NULL);
        |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
  $

  $ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id
  00000000005ba180 T btf__load_from_kernel_by_id
  $

  $ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf

  /tmp/build/perf-urgent/perf:     file format elf64-x86-64
  <SNIP>
  00000000005ba180 <btf__load_from_kernel_by_id>:
  #include "record.h"
  #include "util/synthetic-events.h"

  #ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
  struct btf *btf__load_from_kernel_by_id(__u32 id)
  {
    5ba180: 55                    push   %rbp
    5ba181: 48 89 e5              mov    %rsp,%rbp
    5ba184: 48 83 ec 10           sub    $0x10,%rsp
    5ba188: 64 48 8b 04 25 28 00 mov    %fs:0x28,%rax
    5ba18f: 00 00
    5ba191: 48 89 45 f8           mov    %rax,-0x8(%rbp)
    5ba195: 31 c0                 xor    %eax,%eax
         struct btf *btf;
  #pragma GCC diagnostic push
  #pragma GCC diagnostic ignored "-Wdeprecated-declarations"
         int err = btf__get_from_id(id, &btf);
    5ba197: 48 8d 75 f0           lea    -0x10(%rbp),%rsi
    5ba19b: e8 a0 57 e5 ff        call   40f940 <btf__get_from_id@plt>
    5ba1a0: 89 c2                 mov    %eax,%edx
  #pragma GCC diagnostic pop

         return err ? ERR_PTR(err) : btf;
    5ba1a2: 48 98                 cltq
    5ba1a4: 85 d2                 test   %edx,%edx
    5ba1a6: 48 0f 44 45 f0        cmove  -0x10(%rbp),%rax
  }
  <SNIP>

Fixes: 218e7b775d368f38 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions")
Reported-by: Avi Kivity <avi@scylladb.com>
Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

selftests: kvm/x86: Verify the pmu event filter matches the correct event

Add a test to demonstrate that when the guest programs an event select
it is matched correctly in the pmu event filter and not inadvertently
filtered.  This could happen on AMD if the high nybble[1] in the event
select gets truncated away only leaving the bottom byte[2] left for
matching.

This is a contrived example used for the convenience of demonstrating
this issue, however, this can be applied to event selects 0x28A (OC
Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up
being denied when the event select was only set up to deny 0x28A.

[1] bits 35:32 in the event select register and bits 11:8 in the event
    select.
[2] bits 7:0 in the event select register and bits 7:0 in the event
    select.

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm/x86: Add the helper function create_pmu_event_filter

Add a helper function that creates a pmu event filter given an event
list. Currently, a pmu event filter can only be created with the same
hard coded event list. Add a way to create one given a different event
list.

Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify
it's purpose given the introduction of create_pmu_event_filter.

No functional changes intended.

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: x86/pmu: Fix the compare function used by the pmu event filter

When returning from the compare function the u64 is truncated to an
int.  This results in a loss of the high nybble[1] in the event select
and its sign if that nybble is in use.  Switch from using a result that
can end up being truncated to a result that can only be: 1, 0, -1.

[1] bits 35:32 in the event select register and bits 11:8 in the event
    select.

Fixes: 7ff775aca48ad ("KVM: x86/pmu: Use binary search to check filtered events")
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220517051238.2566934-1-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'v5.18-p2' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
"Fix a regression in a recent fix to qcom-rng"

* tag 'v5.18-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ

scsi: ufs: core: Fix referencing invalid rsp field

Fix referencing sense data when it is invalid. When the length of the data
segment is 0, there is no valid information in the rsp field, so
ufshpb_rsp_upiu() is returned without additional operation.

Link: https://lore.kernel.org/r/252651381.41652940482659.JavaMail.epsvc@epcpadp4
Fixes: 4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read")
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

riscv: dts: microchip: fix gpio1 reg property typo

Fix reg address typo in the gpio1 stanza.

Signed-off-by: Conor Paxton <conor.paxton@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Link: https://lore.kernel.org/r/20220517104058.2004734-1-conor.paxton@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

riscv: dts: sifive: fu540-c000: align dma node name with dtschema

Fixes dtbs_check warnings like:

dma@3000000: $nodename:0: 'dma@3000000' does not match '^dma-controller(@.*)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220407193856.18223-1-krzysztof.kozlowski@linaro.org
Fixes: c5ab54e9945b ("riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge tag 'for-5.18/parisc-4' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:
"We had two big outstanding issues after v5.18-rc6:

   a) 32-bit kernels on 64-bit machines (e.g. on a C3700 which is able
      to run 32- and 64-bit kernels) failed early in userspace.

   b) 64-bit kernels on PA8800/PA8900 CPUs (e.g. in a C8000) showed
      random userspace segfaults. We assumed that those problems were
      caused by the tmpalias flushes.

  Dave did a lot of testing and reorganization of the current flush code
  and fixed the 32-bit cache flushing. For PA8800/PA8900 CPUs he
  switched the code to flush using the virtual address of user and
  kernel pages instead of using tmpalias flushes. The tmpalias flushes
  don't seem to work reliable on such CPUs.

  We tested the patches on a wide range machines (715/64, B160L, C3000,
  C3700, C8000, rp3440) and they have been in for-next without any
  conflicts.

  Summary:

   - Rewrite the cache flush code for PA8800/PA8900 CPUs to flush using
     the virtual address of user and kernel pages instead of using
     tmpalias flushes. Testing showed, that tmpalias flushes don't work
     reliably on PA8800/PA8900 CPUs

   - Fix flush code to allow 32-bit kernels to run on 64-bit capable
     machines, e.g. a 32-bit kernel on C3700 machines"

* tag 'for-5.18/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix patch code locking and flushing
  parisc: Rewrite cache flush code for PA8800/PA8900
  parisc: Disable debug code regarding cache flushes in handle_nadtlb_fault()

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"Two further fixes for Spectre-BHB from Ard for Cortex A15 and to use
  the wide branch instruction for Thumb2"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2
  ARM: 9196/1: spectre-bhb: enable for Cortex-A15

Merge tag 'pinctrl-v5.18-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

- Fix an altmode in the Ocelot driver

- Fix the IES control pins in the Mediatek MT8365 driver

- Sunxi (AMLogic) driver:
    - Fix the UART2 function pin assignments
    - Fix the signal name of the PA2 SPI pin

* tag 'pinctrl-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunxi: f1c100s: Fix signal name comment for PA2 SPI pin
  pinctrl: sunxi: fix f1c100s uart2 function
  pinctrl: mediatek: mt8365: fix IES control pins
  pinctrl: ocelot: Fix for lan966x alt mode

Merge tag 'net-5.18-rc8' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm and netfilter subtrees.

  Notably this reverts a recent TCP/DCCP netns-related change to address
  a possible UaF.

  Current release - regressions:

   - tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"

   - xfrm: set dst dev to blackhole_netdev instead of loopback_dev in
     ifdown

  Previous releases - regressions:

   - netfilter: flowtable: fix TCP flow teardown

   - can: revert "can: m_can: pci: use custom bit timings for Elkhart
     Lake"

   - xfrm: check encryption module availability consistency

   - eth: vmxnet3: fix possible use-after-free bugs in
     vmxnet3_rq_alloc_rx_buf()

   - eth: mlx5: initialize flow steering during driver probe

   - eth: ice: fix crash when writing timestamp on RX rings

  Previous releases - always broken:

   - mptcp: fix checksum byte order

   - eth: lan966x: fix assignment of the MAC address

   - eth: mlx5: remove HW-GRO from reported features

   - eth: ftgmac100: disable hardware checksum on AST2600"

* tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
  ptp: ocp: change sysfs attr group handling
  selftests: forwarding: fix missing backslash
  netfilter: nf_tables: disable expression reduction infra
  netfilter: flowtable: move dst_check to packet path
  netfilter: flowtable: fix TCP flow teardown
  net: ftgmac100: Disable hardware checksum on AST2600
  igb: skip phy status check where unavailable
  nfc: pn533: Fix buggy cleanup order
  mptcp: Do TCP fallback on early DSS checksum failure
  mptcp: fix checksum byte order
  net: af_key: check encryption module availability consistency
  net: af_key: add check for pfkey_broadcast in function pfkey_process
  net/mlx5: Drain fw_reset when removing device
  net/mlx5e: CT: Fix setting flow_source for smfs ct tuples
  net/mlx5e: CT: Fix support for GRE tuples
  net/mlx5e: Remove HW-GRO from reported features
  net/mlx5e: Properly block HW GRO when XDP is enabled
  net/mlx5e: Properly block LRO when XDP is enabled
  net/mlx5e: Block rx-gro-hw feature in switchdev mode
  ...

mmc: core: Fix busy polling for MMC_SEND_OP_COND again

It turned out that polling period for MMC_SEND_OP_COND, that currently is
set to 1ms, still isn't sufficient. In particular a Micron eMMC on a
Beaglebone platform, is reported to sometimes fail to initialize.

Additional test, shows that extending the period to 4ms is working fine, so
let's make that change.

Reported-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de>
Tested-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de>
Fixes: 1760fdb6fe9f (mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND")
Fixes: 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220517101046.27512-1-ulf.hansson@linaro.org

drm/i915: Use i915_gem_object_ggtt_pin_ww for reloc_iomap

When removing short term pins, I've changed the the batch buffer
pinning for relocation to use __i915_vma_pin, because
i915_gem_object_ggtt_pin_ww was destroying the old vma. This
caused regressions, because the functions are not identical.

Fix the regressions by calling i915_gem_object_ggtt_pin_ww() again
on ggtt-only platforms, but only if the batch can be pinned without
being moved.

Fixes: b5cfe6f7a6e1 ("drm/i915: Remove short-term pins from execbuf, v6.")
Cc: Matthew Auld <matthew.auld@intel.com>
Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5806
Link: https://patchwork.freedesktop.org/patch/msgid/20220511115219.46507-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit 451374eef622fca6f00eeeda89aaccb45a30a149)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.

It is possible to stack bridges on top of each other. Consider the
following which makes use of an Ethernet switch:

       br1
     /    \
    /      \
   /        \
br0.11    wlan0
   |
   br0
/  |  \
p1  p2  p3

br0 is offloaded to the switch. Above br0 is a vlan interface, for
vlan 11. This vlan interface is then a slave of br1. br1 also has a
wireless interface as a slave. This setup trunks wireless lan traffic
over the copper network inside a VLAN.

A frame received on p1 which is passed up to the bridge has the
skb->offload_fwd_mark flag set to true, indicating that the switch has
dealt with forwarding the frame out ports p2 and p3 as needed. This
flag instructs the software bridge it does not need to pass the frame
back down again. However, the flag is not getting reset when the frame
is passed upwards. As a result br1 sees the flag, wrongly interprets
it, and fails to forward the frame to wlan0.

When passing a frame upwards, clear the flag. This is the Rx
equivalent of br_switchdev_frame_unmark() in br_dev_xmit().

Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ptp: ocp: change sysfs attr group handling

In the detach path, the driver calls sysfs_remove_group() for the
groups it believes has been registered. However, if the group was
never previously registered, then this causes a splat.

Instead, compute the groups that should be registered in advance,
and then call sysfs_create_groups(), which registers them all at once.

Update the error handling appropriately.

Fixes: c205d53c4923 ("ptp: ocp: Add firmware capability bits for feature gating")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'amd-drm-fixes-5.18-2022-05-18' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.18-2022-05-18:

amdgpu:
- Suspend/resume regression fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518202045.9123-1-alexander.deucher@amd.com

selftests: forwarding: fix missing backslash

Fix missing backslash, introduced in f62c5acc800ee. Causes all tests to
not be installed.

Fixes: f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile")
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Reduce number of hardware offload retries from flowtable datapath
   which might hog system with retries, from Felix Fietkau.

2) Skip neighbour lookup for PPPoE device, fill_forward_path() already
   provides this and set on destination address from fill_forward_path for
   PPPoE device, also from Felix.

4) When combining PPPoE on top of a VLAN device, set info->outdev to the
   PPPoE device so software offload works, from Felix.

5) Fix TCP teardown flowtable state, races with conntrack gc might result
   in resetting the state to ESTABLISHED and the time to one day. Joint
   work with Oz Shlomo and Sven Auhagen.

6) Call dst_check() from flowtable datapath to check if dst is stale
   instead of doing it from garbage collector path.

7) Disable register tracking infrastructure, either user-space or
   kernel need to pre-fetch keys inconditionally, otherwise register
   tracking assumes data is already available in register that might
   not well be there, leading to incorrect reductions.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: disable expression reduction infra
  netfilter: flowtable: move dst_check to packet path
  netfilter: flowtable: fix TCP flow teardown
  netfilter: nft_flow_offload: fix offload with pppoe + vlan
  net: fix dev_fill_forward_path with pppoe + bridge
  netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices
  netfilter: flowtable: fix excessive hw offload attempts after failure
====================

Link: https://lore.kernel.org/r/20220518213841.359653-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block

Pull block fix from Jens Axboe:
"Just a small fix for a missing fifo time assigment for the head
insertion case in mq-deadline"

* tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block:
block/mq-deadline: Set the fifo_time member also if inserting at head

Merge tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"Two small changes fixing issues from the 5.18 merge window:

   - Fix wrong ordering of a tracepoint (Dylan)

   - Fix MSG_RING on IOPOLL rings (me)"

* tag 'io_uring-5.18-2022-05-18' of git://git.kernel.dk/linux-block:
  io_uring: don't attempt to IOPOLL for MSG_RING requests
  io_uring: fix ordering of args in io_uring_queue_async_work

Merge tag 'audit-pr-20220518' of git://git./linux/kernel/git/pcmoore/audit

Pull audit fix from Paul Moore:
"A single audit patch to fix a problem where a task's audit_context was
not being properly reset with io_uring"

* tag 'audit-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit,io_uring,io-wq: call __audit_uring_exit for dummy contexts

Merge tag 'selinux-pr-20220518' of git://git./linux/kernel/git/pcmoore/selinux

Pull selinux fix from Paul Moore:
"A single SELinux patch to fix an error path that was doing the wrong
thing with respect to freeing memory"

* tag 'selinux-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix bad cleanup on error in hashtab_duplicate()

Merge branch 'arm/fixes' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"The SoC bug fixes have calmed down sufficiently, there is one minor
  update for the MAINTAINERS file, and few bug fixes for dts
  descriptions:

   - Updates to the BananaPi R2-Pro (rk3568) dts to match production
     hardware rather than the prototype version.

   - Qualcomm sm8250 soundwire gets disabled on some machines to avoid
     crashes

   - A number of aspeed SoC specific fixes, addressing incorrect pin
     cotrol settings, some values in the romed8hm board, and a revert
     for an accidental removal of a DT node"

* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: omap: remove me as a maintainer
  ARM: dts: aspeed: Add video engine to g6
  ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
  ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
  ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
  ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
  dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
  pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
  dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
  pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
  ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
  arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
  arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
  arm64: dts: rockchip: Change io-domains of bpi-r2-pro

Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs

Pull misc fixes from Al Viro:
"vhost race fix and a percpu_ref_init-caused cgroup double-free fix.

  The latter had manifested as buggered struct mount refcounting - those
  are also using percpu data structures, but anything that does percpu
  allocations could be hit"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Fix double fget() in vhost_net_set_backend()
  percpu_ref_init(): clean ->percpu_count_ref on failure

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull mlx5 fix from Michael Tsirkin:
"One last minute fixup

  The patch has been on list for a while but as it was posted as part of
  a thread it was missed"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Use consistent RQT size

Input: ili210x - use one common reset implementation

Rename ili251x_hardware_reset() to ili210x_hardware_reset(), change its
parameter from struct device * to struct gpio_desc *, and use it as one
single consistent reset implementation all over the driver. Also increase
the minimum reset duration to 12ms, to make sure the reset is really
within the spec.

Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518210423.106555-1-marex@denx.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: ili210x - fix reset timing

According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30
"2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum
10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset
timings such that T4 is 12ms and T2 is 160ms to fit those figures.

This prevents sporadic touch controller start up failures when some
systems with at least ILI251x controller boot, without this patch
the systems sometimes fail to communicate with the touch controller.

Fixes: 201f3c803544c ("Input: ili210x - add reset GPIO support")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drm/amd: Don't reset dGPUs if the system is going to s2idle

An A+A configuration on ASUS ROG Strix G513QY proves that the ASIC
reset for handling aborted suspend can't work with s2idle.

This functionality was introduced in commit daf8de0874ab5b ("drm/amdgpu:
always reset the asic in suspend (v2)"). A few other commits have
gone on top of the ASIC reset, but this still doesn't work on the A+A
configuration in s2idle.

Avoid doing the reset on dGPUs specifically when using s2idle.

Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2008
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

libceph: fix misleading ceph_osdc_cancel_request() comment

cancel_request() never guaranteed that after its return the OSD
client would be completely done with the OSD request. The callback
(if specified) can still be invoked and a ref can still be held.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>

libceph: fix potential use-after-free on linger ping and resends

request_reinit() is not only ugly as the comment rightfully suggests,
but also unsafe.  Even though it is called with osdc->lock held for
write in all cases, resetting the OSD request refcount can still race
with handle_reply() and result in use-after-free.  Taking linger ping
as an example:

    handle_timeout thread                     handle_reply thread

                                              down_read(&osdc->lock)
                                              req = lookup_request(...)
                                              ...
                                              finish_request(req)  # unregisters
                                              up_read(&osdc->lock)
                                              __complete_request(req)
                                                linger_ping_cb(req)

      # req->r_kref == 2 because handle_reply still holds its ref

    down_write(&osdc->lock)
    send_linger_ping(lreq)
      req = lreq->ping_req  # same req
      # cancel_linger_request is NOT
      # called - handle_reply already
      # unregistered
      request_reinit(req)
        WARN_ON(req->r_kref != 1)  # fires
        request_init(req)
          kref_init(req->r_kref)

                   # req->r_kref == 1 after kref_init

                                              ceph_osdc_put_request(req)
                                                kref_put(req->r_kref)

            # req->r_kref == 0 after kref_put, req is freed

        <further req initialization/use> !!!

This happens because send_linger_ping() always (re)uses the same OSD
request for watch ping requests, relying on cancel_linger_request() to
unregister it from the OSD client and rip its messages out from the
messenger.  send_linger() does the same for watch/notify registration
and watch reconnect requests.  Unfortunately cancel_request() doesn't
guarantee that after it returns the OSD client would be completely done
with the OSD request -- a ref could still be held and the callback (if
specified) could still be invoked too.

The original motivation for request_reinit() was inability to deal with
allocation failures in send_linger() and send_linger_ping().  Switching
to using osdc->req_mempool (currently only used by CephFS) respects that
and allows us to get rid of request_reinit().

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>

Fix double fget() in vhost_net_set_backend()

Descriptor table is a shared resource; two fget() on the same descriptor
may return different struct file references. get_tap_ptr_ring() is
called after we'd found (and pinned) the socket we'll be using and it
tries to find the private tun/tap data structures associated with it.
Redoing the lookup by the same file descriptor we'd used to get the
socket is racy - we need to same struct file.

Thanks to Jason for spotting a braino in the original variant of patch -
I'd missed the use of fd == -1 for disabling backend, and in that case
we can end up with sock == NULL and sock != oldsock.

Cc: stable@kernel.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

vdpa/mlx5: Use consistent RQT size

The current code evaluates RQT size based on the configured number of
virtqueues. This can raise an issue in the following scenario:

Assume MQ was negotiated.
1. mlx5_vdpa_set_map() gets called.
2. handle_ctrl_mq() is called setting cur_num_vqs to some value, lower
   than the configured max VQs.
3. A second set_map gets called, but now a smaller number of VQs is used
   to evaluate the size of the RQT.
4. handle_ctrl_mq() is called with a value larger than what the RQT can
   hold. This will emit errors and the driver state is compromised.

To fix this, we use a new field in struct mlx5_vdpa_net to hold the
required number of entries in the RQT. This value is evaluated in
mlx5_vdpa_set_driver_features() where we have the negotiated features
all set up.

In addition to that, we take into consideration the max capability of RQT
entries early when the device is added so we don't need to take consider
it when creating the RQT.

Last, we remove the use of mlx5_vdpa_max_qps() which just returns the
max_vas / 2 and make the code clearer.

Fixes: 52893733f2c5 ("vdpa/mlx5: Add multiqueue support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge tag 'sound-5.18' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of last-minute HD- an USB-audio quirks in addition to a
  fix for the legacy ISA wavefront driver.

  All look small and easy"

* tag 'sound-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Restore Rane SL-1 quirk
  ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
  ALSA: hda/realtek: Add quirk for TongFang devices with pop noise
  ALSA: hda/realtek: Add quirk for the Framework Laptop
  ALSA: wavefront: Proper check of get_user() error
  ALSA: hda/realtek: Add quirk for Dell Latitude 7520
  ALSA: hda - fix unused Realtek function when PM is not enabled
  ALSA: usb-audio: Don't get sample rate for MCT Trigger 5 USB-to-HDMI

netfilter: nf_tables: disable expression reduction infra

Either userspace or kernelspace need to pre-fetch keys inconditionally
before comparisons for this to work. Otherwise, register tracking data
is misleading and it might result in reducing expressions which are not
yet registers.

First expression is also guaranteed to be evaluated always, however,
certain expressions break before writing data to registers, before
comparing the data, leaving the register in undetermined state.

This patch disables this infrastructure by now.

Fixes: b2d306542ff9 ("netfilter: nf_tables: do not reduce read-only expressions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: flowtable: move dst_check to packet path

Fixes sporadic IPv6 packet loss when flow offloading is enabled.

IPv6 route GC and flowtable GC are not synchronized.
When dst_cache becomes stale and a packet passes through the flow before
the flowtable GC teardowns it, the packet can be dropped.
So, it is necessary to check dst every time in packet path.

Fixes: 227e1e4d0d6c ("netfilter: nf_flowtable: skip device lookup from interface index")
Signed-off-by: Ritaro Takenaka <ritarot634@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: flowtable: fix TCP flow teardown

This patch addresses three possible problems:

1. ct gc may race to undo the timeout adjustment of the packet path, leaving
   the conntrack entry in place with the internal offload timeout (one day).

2. ct gc removes the ct because the IPS_OFFLOAD_BIT is not set and the CLOSE
   timeout is reached before the flow offload del.

3. tcp ct is always set to ESTABLISHED with a very long timeout
   in flow offload teardown/delete even though the state might be already
   CLOSED. Also as a remark we cannot assume that the FIN or RST packet
   is hitting flow table teardown as the packet might get bumped to the
   slow path in nftables.

This patch resets IPS_OFFLOAD_BIT from flow_offload_teardown(), so
conntrack handles the tcp rst/fin packet which triggers the CLOSE/FIN
state transition.

Moreover, teturn the connection's ownership to conntrack upon teardown
by clearing the offload flag and fixing the established timeout value.
The flow table GC thread will asynchonrnously free the flow table and
hardware offload entries.

Before this patch, the IPS_OFFLOAD_BIT remained set for expired flows on
which is also misleading since the flow is back to classic conntrack
path.

If nf_ct_delete() removes the entry from the conntrack table, then it
calls nf_ct_put() which decrements the refcnt. This is not a problem
because the flowtable holds a reference to the conntrack object from
flow_offload_alloc() path which is released via flow_offload_free().

This patch also updates nft_flow_offload to skip packets in SYN_RECV
state. Since we might miss or bump packets to slow path, we do not know
what will happen there while we are still in SYN_RECV, this patch
postpones offload up to the next packet which also aligns to the
existing behaviour in tc-ct.

flow_offload_teardown() does not reset the existing tcp state from
flow_offload_fixup_tcp() to ESTABLISHED anymore, packets bump to slow
path might have already update the state to CLOSE/FIN.

Joint work with Oz and Sven.

Fixes: 1e5b2471bcc4 ("netfilter: nf_flow_table: teardown flow timeout race")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

net: ftgmac100: Disable hardware checksum on AST2600

The AST2600 when using the i210 NIC over NC-SI has been observed to
produce incorrect checksum results with specific MTU values. This was
first observed when sending data across a long distance set of networks.

On a local network, the following test was performed using a 1MB file of
random data.

On the receiver run this script:

#!/bin/bash
while [ 1 ]; do
        # Zero the stats
        nstat -r  > /dev/null
        nc -l 9899 > test-file
        # Check for checksum errors
        TcpInCsumErrors=$(nstat | grep TcpInCsumErrors)
        if [ -z "$TcpInCsumErrors" ]; then
                echo No TcpInCsumErrors
        else
                echo TcpInCsumErrors = $TcpInCsumErrors
        fi
done

On an AST2600 system:

# nc <IP of  receiver host> 9899 < test-file

The test was repeated with various MTU values:

# ip link set mtu 1410 dev eth0

The observed results:

1500 - good
1434 - bad
1400 - good
1410 - bad
1420 - good

The test was repeated after disabling tx checksumming:

# ethtool -K eth0 tx-checksumming off

And all MTU values tested resulted in transfers without error.

An issue with the driver cannot be ruled out, however there has been no
bug discovered so far.

David has done the work to take the original bug report of slow data
transfer between long distance connections and triaged it down to this
test case.

The vendor suspects this this is a hardware issue when using NC-SI. The
fixes line refers to the patch that introduced AST2600 support.

Reported-by: David Wilder <wilder@us.ibm.com>
Reviewed-by: Dylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

igb: skip phy status check where unavailable

igb_read_phy_reg() will silently return, leaving phy_data untouched, if
hw->ops.read_reg isn't set. Depending on the uninitialized value of
phy_data, this led to the phy status check either succeeding immediately
or looping continuously for 2 seconds before emitting a noisy err-level
timeout. This message went out to the console even though there was no
actual problem.

Instead, first check if there is read_reg function pointer. If not,
proceed without trying to check the phy status register.

Fixes: b72f3f72005d ("igb: When GbE link up, wait for Remote receiver status condition")
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: pn533: Fix buggy cleanup order

When removing the pn533 device (i2c or USB), there is a logic error. The
original code first cancels the worker (flush_delayed_work) and then
destroys the workqueue (destroy_workqueue), leaving the timer the last
one to be deleted (del_timer). This result in a possible race condition
in a multi-core preempt-able kernel. That is, if the cleanup
(pn53x_common_clean) is concurrently run with the timer handler
(pn533_listen_mode_timer), the timer can queue the poll_work to the
already destroyed workqueue, causing use-after-free.

This patch reorder the cleanup: it uses the del_timer_sync to make sure
the handler is finished before the routine will destroy the workqueue.
Note that the timer cannot be activated by the worker again.

static void pn533_wq_poll(struct work_struct *work)
...
rc = pn533_send_poll_frame(dev);
if (rc)
return;

if (cur_mod->len == 0 && dev->poll_mod_count > 1)
mod_timer(&dev->listen_timer, ...);

That is, the mod_timer can be called only when pn533_send_poll_frame()
returns no error, which is impossible because the device is detaching
and the lower driver should return ENODEV code.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mptcp-checksums'

Mat Martineau says:

====================
mptcp: Fix checksum byte order on little-endian

These patches address a bug in the byte ordering of MPTCP checksums on
little-endian architectures. The __sum16 type is always big endian, but
was being cast to u16 and then byte-swapped (on little-endian archs)
when reading/writing the checksum field in MPTCP option headers.

MPTCP checksums are off by default, but are enabled if one or both peers
request it in the SYN/SYNACK handshake.

The corrected code is verified to interoperate between big-endian and
little-endian machines.

Patch 1 fixes the checksum byte order, patch 2 partially mitigates
interoperation with peers sending bad checksums by falling back to TCP
instead of resetting the connection.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: Do TCP fallback on early DSS checksum failure

RFC 8684 section 3.7 describes several opportunities for a MPTCP
connection to "fall back" to regular TCP early in the connection
process, before it has been confirmed that MPTCP options can be
successfully propagated on all SYN, SYN/ACK, and data packets. If a peer
acknowledges the first received data packet with a regular TCP header
(no MPTCP options), fallback is allowed.

If the recipient of that first data packet finds a MPTCP DSS checksum
error, this provides an opportunity to fail gracefully with a TCP
fallback rather than resetting the connection (as might happen if a
checksum failure were detected later).

This commit modifies the checksum failure code to attempt fallback on
the initial subflow of a MPTCP connection, only if it's a failure in the
first data mapping. In cases where the peer initiates the connection,
requests checksums, is the first to send data, and the peer is sending
incorrect checksums (see
https://github.com/multipath-tcp/mptcp_net-next/issues/275), this allows
the connection to proceed as TCP rather than reset.

Fixes: dd8bcd1768ff ("mptcp: validate the data checksum")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: fix checksum byte order

The MPTCP code typecasts the checksum value to u16 and
then converts it to big endian while storing the value into
the MPTCP option.

As a result, the wire encoding for little endian host is
wrong, and that causes interoperabilty interoperability
issues with other implementation or host with different endianness.

Address the issue writing in the packet the unmodified __sum16 value.

MPTCP checksum is disabled by default, interoperating with systems
with bad mptcp-level csum encoding should cause fallback to TCP.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/275
Fixes: c5b39e26d003 ("mptcp: send out checksum for DSS")
Fixes: 390b95a5fb84 ("mptcp: receive checksum for DSS")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-05-17

This series contains updates to ice driver only.

Arkadiusz prevents writing of timestamps when rings are being
configured to resolve null pointer dereference.

Paul changes a delayed call to baseline statistics to occur immediately
which was causing misreporting of statistics due to the delay.

Michal fixes incorrect restoration of interrupt moderation settings.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2022-05-18

1) Fix "disable_policy" flag use when arriving from different devices.
   From Eyal Birger.

2) Fix error handling of pfkey_broadcast in function pfkey_process.
   From Jiasheng Jiang.

3) Check the encryption module availability consistency in pfkey.
   From Thomas Bartschies.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2

In Thumb2, 'b . + 4' produces a branch instruction that uses a narrow
encoding, and so it does not jump to the following instruction as
expected. So use W(b) instead.

Fixes: 6c7cb60bff7a ("ARM: fix Thumb2 regression with Spectre BHB")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

ARM: 9196/1: spectre-bhb: enable for Cortex-A15

The Spectre-BHB mitigations were inadvertently left disabled for
Cortex-A15, due to the fact that cpu_v7_bugs_init() is not called in
that case. So fix that.

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Merge tag 'mlx5-fixes-2022-05-17' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2022-05-17

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: af_key: check encryption module availability consistency

Since the recent introduction supporting the SM3 and SM4 hash algos for IPsec, the kernel
produces invalid pfkey acquire messages, when these encryption modules are disabled. This
happens because the availability of the algos wasn't checked in all necessary functions.
This patch adds these checks.

Signed-off-by: Thomas Bartschies <thomas.bartschies@cvk.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

net: af_key: add check for pfkey_broadcast in function pfkey_process

If skb_clone() returns null pointer, pfkey_broadcast() will
return error.
Therefore, it should be better to check the return value of
pfkey_broadcast() and return error if fails.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

percpu_ref_init(): clean ->percpu_count_ref on failure

That way percpu_ref_exit() is safe after failing percpu_ref_init().
At least one user (cgroup_create()) had a double-free that way;
there might be other similar bugs. Easier to fix in percpu_ref_init(),
rather than playing whack-a-mole in sloppy users...

Usual symptoms look like a messed refcounting in one of subsystems
that use percpu allocations (might be percpu-refcount, might be
something else). Having refcounts for two different objects share
memory is Not Nice(tm)...

Reported-by: syzbot+5b1e53987f858500ec00@syzkaller.appspotmail.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

net/mlx5: Drain fw_reset when removing device

In case fw sync reset is called in parallel to device removal, device
might stuck in the following deadlock:
         CPU 0                        CPU 1
         -----                        -----
                                  remove_one
                                   uninit_one (locks intf_state_mutex)
mlx5_sync_reset_now_event()
work in fw_reset->wq.
mlx5_enter_error_state()
  mutex_lock (intf_state_mutex)
                                   cleanup_once
                                    fw_reset_cleanup()
                                     destroy_workqueue(fw_reset->wq)

Drain the fw_reset WQ, and make sure no new work is being queued, before
entering uninit_one().
The Drain is done before devlink_unregister() since fw_reset, in some
flows, is using devlink API devlink_remote_reload_actions_performed().

Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: CT: Fix setting flow_source for smfs ct tuples

Cited patch sets flow_source to ANY overriding the provided spec
flow_source, avoiding the optimization done by commit c9c079b4deaa
("net/mlx5: CT: Set flow source hint from provided tuple device").

To fix the above, set the dr_rule flow_source from provided flow spec.

Fixes: 3ee61ebb0df1 ("net/mlx5: CT: Add software steering ct flow steering provider")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: CT: Fix support for GRE tuples

cited commit removed support for GRE tuples when software steering was enabled.

To bring back support for GRE tuples, add GRE ipv4/ipv6 matchers.

Fixes: 3ee61ebb0df1 ("net/mlx5: CT: Add software steering ct flow steering provider")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Remove HW-GRO from reported features

We got reports of certain HW-GRO flows causing kernel call traces, which
might be related to firmware. To be on the safe side, disable the
feature for now and re-enable it once a driver/firmware fix is found.

Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Properly block HW GRO when XDP is enabled

HW GRO is incompatible and mutually exclusive with XDP and XSK. However,
the needed checks are only made when enabling XDP. If HW GRO is enabled
when XDP is already active, the command will succeed, and XDP will be
skipped in the data path, although still enabled.

This commit fixes the bug by checking the XDP and XSK status in
mlx5e_fix_features and disabling HW GRO if XDP is enabled.

Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Properly block LRO when XDP is enabled

LRO is incompatible and mutually exclusive with XDP. However, the needed
checks are only made when enabling XDP. If LRO is enabled when XDP is
already active, the command will succeed, and XDP will be skipped in the
data path, although still enabled.

This commit fixes the bug by checking the XDP status in
mlx5e_fix_features and disabling LRO if XDP is enabled.

Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Block rx-gro-hw feature in switchdev mode

When the driver is in switchdev mode and rx-gro-hw is set, the RQ needs
special CQE handling. Till then, block setting of rx-gro-hw feature in
switchdev mode, to avoid failure while setting the feature due to
failure while opening the RQ.

Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Wrap mlx5e_trap_napi_poll into rcu_read_lock

The body of mlx5e_napi_poll is wrapped into rcu_read_lock to be able to
read the XDP program pointer using rcu_dereference. However, the trap RQ
NAPI doesn't use rcu_read_lock, because the trap RQ works only in the
non-linear mode, and mlx5e_skb_from_cqe_nonlinear, until recently,
didn't support XDP and didn't call rcu_dereference.

Starting from the cited commit, mlx5e_skb_from_cqe_nonlinear supports
XDP and calls rcu_dereference, but mlx5e_trap_napi_poll doesn't wrap it
into rcu_read_lock. It leads to RCU-lockdep warnings like this:

WARNING: suspicious RCU usage

This commit fixes the issue by adding an rcu_read_lock to
mlx5e_trap_napi_poll, similarly to mlx5e_napi_poll.

Fixes: ea5d49bdae8b ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: DR, Ignore modify TTL on RX if device doesn't support it

When modifying TTL, packet's csum has to be recalculated.
Due to HW issue in ConnectX-5, csum recalculation for modify
TTL on RX is supported through a work-around that is specifically
enabled by configuration.
If the work-around isn't enabled, rather than adding an unsupported
action the modify TTL action on RX should be ignored.
Ignoring modify TTL action might result in zero actions, so in such
cases we will not convert the match STE to modify STE, as it is done
by FW in DMFS.

This patch fixes an issue where modify TTL action was ignored both
on RX and TX instead of only on RX.

Fixes: 4ff725e1d4ad ("net/mlx5: DR, Ignore modify TTL if device doesn't support it")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Initialize flow steering during driver probe

Currently, software objects of flow steering are created and destroyed
during reload flow. In case a device is unloaded, the following error
is printed during grace period:

mlx5_core 0000:00:0b.0: mlx5_fw_fatal_reporter_err_work:690:(pid 95):
    Driver is in error state. Unloading

As a solution to fix use-after-free bugs, where we try to access
these objects, when reading the value of flow_steering_mode devlink
param[1], let's split flow steering creation and destruction into two
routines:
    * init and cleanup: memory, cache, and pools allocation/free.
    * create and destroy: namespaces initialization and cleanup.

While at it, re-order the cleanup function to mirror the init function.

[1]
Kasan trace:

[  385.119849 ] BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x3b/0xa0
[  385.119849 ] Read of size 4 at addr ffff888104b79308 by task bash/291
[  385.119849 ]
[  385.119849 ] CPU: 1 PID: 291 Comm: bash Not tainted 5.17.0-rc1+ #2
[  385.119849 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
[  385.119849 ] Call Trace:
[  385.119849 ]  <TASK>
[  385.119849 ]  dump_stack_lvl+0x6e/0x91
[  385.119849 ]  print_address_description.constprop.0+0x1f/0x160
[  385.119849 ]  ? mlx5_devlink_fs_mode_get+0x3b/0xa0
[  385.119849 ]  ? mlx5_devlink_fs_mode_get+0x3b/0xa0
[  385.119849 ]  kasan_report.cold+0x83/0xdf
[  385.119849 ]  ? devlink_param_notify+0x20/0x190
[  385.119849 ]  ? mlx5_devlink_fs_mode_get+0x3b/0xa0
[  385.119849 ]  mlx5_devlink_fs_mode_get+0x3b/0xa0
[  385.119849 ]  devlink_nl_param_fill+0x18a/0xa50
[  385.119849 ]  ? _raw_spin_lock_irqsave+0x8d/0xe0
[  385.119849 ]  ? devlink_flash_update_timeout_notify+0xf0/0xf0
[  385.119849 ]  ? __wake_up_common+0x4b/0x1e0
[  385.119849 ]  ? preempt_count_sub+0x14/0xc0
[  385.119849 ]  ? _raw_spin_unlock_irqrestore+0x28/0x40
[  385.119849 ]  ? __wake_up_common_lock+0xe3/0x140
[  385.119849 ]  ? __wake_up_common+0x1e0/0x1e0
[  385.119849 ]  ? __sanitizer_cov_trace_const_cmp8+0x27/0x80
[  385.119849 ]  ? __rcu_read_unlock+0x48/0x70
[  385.119849 ]  ? kasan_unpoison+0x23/0x50
[  385.119849 ]  ? __kasan_slab_alloc+0x2c/0x80
[  385.119849 ]  ? memset+0x20/0x40
[  385.119849 ]  ? __sanitizer_cov_trace_const_cmp4+0x25/0x80
[  385.119849 ]  devlink_param_notify+0xce/0x190
[  385.119849 ]  devlink_unregister+0x92/0x2b0
[  385.119849 ]  remove_one+0x41/0x140
[  385.119849 ]  pci_device_remove+0x68/0x140
[  385.119849 ]  ? pcibios_free_irq+0x10/0x10
[  385.119849 ]  __device_release_driver+0x294/0x3f0
[  385.119849 ]  device_driver_detach+0x82/0x130
[  385.119849 ]  unbind_store+0x193/0x1b0
[  385.119849 ]  ? subsys_interface_unregister+0x270/0x270
[  385.119849 ]  drv_attr_store+0x4e/0x70
[  385.119849 ]  ? drv_attr_show+0x60/0x60
[  385.119849 ]  sysfs_kf_write+0xa7/0xc0
[  385.119849 ]  kernfs_fop_write_iter+0x23a/0x2f0
[  385.119849 ]  ? sysfs_kf_bin_read+0x160/0x160
[  385.119849 ]  new_sync_write+0x311/0x430
[  385.119849 ]  ? new_sync_read+0x480/0x480
[  385.119849 ]  ? _raw_spin_lock+0x87/0xe0
[  385.119849 ]  ? __sanitizer_cov_trace_cmp4+0x25/0x80
[  385.119849 ]  ? security_file_permission+0x94/0xa0
[  385.119849 ]  vfs_write+0x4c7/0x590
[  385.119849 ]  ksys_write+0xf6/0x1e0
[  385.119849 ]  ? __x64_sys_read+0x50/0x50
[  385.119849 ]  ? fpregs_assert_state_consistent+0x99/0xa0
[  385.119849 ]  do_syscall_64+0x3d/0x90
[  385.119849 ]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  385.119849 ] RIP: 0033:0x7fc36ef38504
[  385.119849 ] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f
80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f
05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53
[  385.119849 ] RSP: 002b:00007ffde0ff3d08 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  385.119849 ] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc36ef38504
[  385.119849 ] RDX: 000000000000000c RSI: 00007fc370521040 RDI: 0000000000000001
[  385.119849 ] RBP: 00007fc370521040 R08: 00007fc36f00b8c0 R09: 00007fc36ee4b740
[  385.119849 ] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc36f00a760
[  385.119849 ] R13: 000000000000000c R14: 00007fc36f005760 R15: 000000000000000c
[  385.119849 ]  </TASK>
[  385.119849 ]
[  385.119849 ] Allocated by task 65:
[  385.119849 ]  kasan_save_stack+0x1e/0x40
[  385.119849 ]  __kasan_kmalloc+0x81/0xa0
[  385.119849 ]  mlx5_init_fs+0x11b/0x1160
[  385.119849 ]  mlx5_load+0x13c/0x220
[  385.119849 ]  mlx5_load_one+0xda/0x160
[  385.119849 ]  mlx5_recover_device+0xb8/0x100
[  385.119849 ]  mlx5_health_try_recover+0x2f9/0x3a1
[  385.119849 ]  devlink_health_reporter_recover+0x75/0x100
[  385.119849 ]  devlink_health_report+0x26c/0x4b0
[  385.275909 ]  mlx5_fw_fatal_reporter_err_work+0x11e/0x1b0
[  385.275909 ]  process_one_work+0x520/0x970
[  385.275909 ]  worker_thread+0x378/0x950
[  385.275909 ]  kthread+0x1bb/0x200
[  385.275909 ]  ret_from_fork+0x1f/0x30
[  385.275909 ]
[  385.275909 ] Freed by task 65:
[  385.275909 ]  kasan_save_stack+0x1e/0x40
[  385.275909 ]  kasan_set_track+0x21/0x30
[  385.275909 ]  kasan_set_free_info+0x20/0x30
[  385.275909 ]  __kasan_slab_free+0xfc/0x140
[  385.275909 ]  kfree+0xa5/0x3b0
[  385.275909 ]  mlx5_unload+0x2e/0xb0
[  385.275909 ]  mlx5_unload_one+0x86/0xb0
[  385.275909 ]  mlx5_fw_fatal_reporter_err_work.cold+0xca/0xcf
[  385.275909 ]  process_one_work+0x520/0x970
[  385.275909 ]  worker_thread+0x378/0x950
[  385.275909 ]  kthread+0x1bb/0x200
[  385.275909 ]  ret_from_fork+0x1f/0x30
[  385.275909 ]
[  385.275909 ] The buggy address belongs to the object at ffff888104b79300
[  385.275909 ]  which belongs to the cache kmalloc-128 of size 128
[  385.275909 ] The buggy address is located 8 bytes inside of
[  385.275909 ]  128-byte region [ffff888104b79300, ffff888104b79380)
[  385.275909 ] The buggy address belongs to the page:
[  385.275909 ] page:00000000de44dd39 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x104b78
[  385.275909 ] head:00000000de44dd39 order:1 compound_mapcount:0
[  385.275909 ] flags: 0x8000000000010200(slab|head|zone=2)
[  385.275909 ] raw: 8000000000010200 0000000000000000 dead000000000122 ffff8881000428c0
[  385.275909 ] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[  385.275909 ] page dumped because: kasan: bad access detected
[  385.275909 ]
[  385.275909 ] Memory state around the buggy address:
[  385.275909 ]  ffff888104b79200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc
[  385.275909 ]  ffff888104b79280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  385.275909 ] >ffff888104b79300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  385.275909 ]                       ^
[  385.275909 ]  ffff888104b79380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  385.275909 ]  ffff888104b79400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  385.275909 ]]

Fixes: e890acd5ff18 ("net/mlx5: Add devlink flow_steering_mode parameter")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: DR, Fix missing flow_source when creating multi-destination FW table

In order to support multiple destination FTEs with SW steering
FW table is created with single FTE with multiple actions and
SW steering rule forward to it. When creating this table, flow
source isn't set according to the original FTE.

Fix this by passing the original FTE flow source to the created
FW table.

Fixes: 34583beea4b7 ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

scsi: target: Fix incorrect use of cpumask_t

In commit d72d827f2f26, I used 'cpumask_t' incorrectly:

    void iscsit_thread_get_cpumask(struct iscsi_conn *conn)
    {
            int ord, cpu;
            cpumask_t conn_allowed_cpumask;
            ......
    }

    static ssize_t lio_target_wwn_cpus_allowed_list_store(
                   struct config_item *item, const char *page, size_t count)
    {
            int ret;
            char *orig;
            cpumask_t new_allowed_cpumask;
            ......
    }

The correct pattern should be as follows:

    cpumask_var_t mask;

    if (!zalloc_cpumask_var(&mask, GFP_KERNEL))
            return -ENOMEM;
    ... use 'mask' here ...
    free_cpumask_var(mask);

Link: https://lore.kernel.org/r/20220516054721.1548-1-mingzhe.zou@easystack.cn
Fixes: d72d827f2f26 ("scsi: target: Add iscsi/cpus_allowed_list in configfs")
Reported-by: Test Bot <zgrieee@gmail.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

NFC: nci: fix sleep in atomic context bugs caused by nci_skb_alloc

There are sleep in atomic context bugs when the request to secure
element of st-nci is timeout. The root cause is that nci_skb_alloc
with GFP_KERNEL parameter is called in st_nci_se_wt_timeout which is
a timer handler. The call paths that could trigger bugs are shown below:

    (interrupt context 1)
st_nci_se_wt_timeout
  nci_hci_send_event
    nci_hci_send_data
      nci_skb_alloc(..., GFP_KERNEL) //may sleep

   (interrupt context 2)
st_nci_se_wt_timeout
  nci_hci_send_event
    nci_hci_send_data
      nci_send_data
        nci_queue_tx_data_frags
          nci_skb_alloc(..., GFP_KERNEL) //may sleep

This patch changes allocation mode of nci_skb_alloc from GFP_KERNEL to
GFP_ATOMIC in order to prevent atomic context sleeping. The GFP_ATOMIC
flag makes memory allocation operation could be used in atomic context.

Fixes: ed06aeefdac3 ("nfc: st-nci: Rename st21nfcb to st-nci")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220517012530.75714-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/qla3xxx: Fix a test in ql_reset_work()

test_bit() tests if one bit is set or not.
Here the logic seems to check of bit QL_RESET_PER_SCSI (i.e. 4) OR bit
QL_RESET_START (i.e. 3) is set.

In fact, it checks if bit 7 (4 | 3 = 7) is set, that is to say
QL_ADAPTER_UP.

This looks harmless, because this bit is likely be set, and when the
ql_reset_work() delayed work is scheduled in ql3xxx_isr() (the only place
that schedule this work), QL_RESET_START or QL_RESET_PER_SCSI is set.

This has been spotted by smatch.

Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/80e73e33f390001d9c0140ffa9baddf6466a41a2.1652637337.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>