review.tizen.org Git - platform/kernel/linux-starfive.git/log

ptp: fix error print of ptp_kvm on X86_64 platform

Commit a86ed2cfa13c5 ("ptp: Don't print an error if ptp_kvm is not supported")
fixes the error message print on ARM platform by only concerning about
the case that the error returned from kvm_arch_ptp_init() is not -EOPNOTSUPP.
Although the ARM platform returns -EOPNOTSUPP if ptp_kvm is not supported
while X86_64 platform returns -KVM_EOPNOTSUPP, both error codes share the
same value 95.

Actually kvm_arch_ptp_init() on X86_64 platform can return three kinds of
errors (-KVM_ENOSYS, -KVM_EOPNOTSUPP and -KVM_EFAULT). The problem is that
-KVM_EOPNOTSUPP is masked out and -KVM_EFAULT is ignored among them.
This patch fixes this by returning them to ptp_kvm_init() respectively.

Signed-off-by: Kele Huang <huangkele@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

perf/x86/msr: Add Sapphire Rapids CPU support

SMI_COUNT MSR is supported on Sapphire Rapids CPU.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1633551137-192083-1-git-send-email-kan.liang@linux.intel.com

eeprom: 93xx46: fix MODULE_DEVICE_TABLE

The newly added SPI device ID table does not work because the
entry is incorrectly copied from the OF device table.

During build testing, this shows as a compile failure when building
it as a loadable module:

drivers/misc/eeprom/eeprom_93xx46.c:424:1: error: redefinition of '__mod_of__eeprom_93xx46_of_table_device_table'
MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);

Change the entry to refer to the correct symbol.

Fixes: 137879f7ff23 ("eeprom: 93xx46: Add SPI device ID table")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211014153730.3821376-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'kvmarm-fixes-5.15-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.15, take #2

- Properly refcount pages used as a concatenated stage-2 PGD
- Fix missing unlock when detecting the use of MTE+VM_SHARED

KVM: SEV-ES: fix length of string I/O

The size of the data in the scratch buffer is not divided by the size of
each port I/O operation, so vcpu->arch.pio.count ends up being larger
than it should be by a factor of size.

Cc: stable@vger.kernel.org
Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers

In laptop 'HP Spectre x360 Convertible 15-eb1xxx/8811' both front and
rear speakers are silent, this patch fixes that by overriding the pin
layout and by initializing the amplifier which needs a GPIO pin to be
set to 1 then 0, similar to the existing HP Spectre x360 14 model.

In order to have volume control, both front and rear speakers were
forced to use the DAC1.

This patch also correctly map the mute LED but since there is no
microphone on/off switch exposed by the alsa subsystem it never turns
on by itself.

There are still known audio issues in this laptop: headset microphone
doesn't work, the button to mute/unmute microphone is not yet mapped,
the LED of the mute/unmute speakers doesn't seems to be exposed via
GPIO and never turns on.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213953
Signed-off-by: Davide Baldo <davide@baldo.me>
Link: https://lore.kernel.org/r/20211015072121.5287-1-davide@baldo.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset

As per discussion at: https://github.com/szszoke/sennheiser-gsp670-pulseaudio-profile/issues/13

The GSP670 has 2 playback and 1 recording device that by default are
detected in an incompatible order for alsa. This may have been done to make
it compatible for the console by the manufacturer and only affects the
latest firmware which uses its own ID.

This quirk will resolve this by reordering the channels.

Signed-off-by: Brendan Grieve <brendan@grieve.com.au>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211015025335.196592-1-brendan@grieve.com.au
Signed-off-by: Takashi Iwai <tiwai@suse.de>

drm/panel: olimex-lcd-olinuxino: select CRC32

Fix the following build/link error by adding a dependency on the CRC32
routines:

ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe':
panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le'

Fixes: 17fd7a9d324fd ("drm/panel: Add support for Olimex LCD-OLinuXino panel")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/r128: fix build for UML

Fix a build error on CONFIG_UML, which does not support (provide)
wbinvd(). UML can use the generic mb() instead.

../drivers/gpu/drm/r128/ati_pcigart.c: In function ‘drm_ati_pcigart_init’:
../drivers/gpu/drm/r128/ati_pcigart.c:218:2: error: implicit declaration of function ‘wbinvd’ [-Werror=implicit-function-declaration]
wbinvd();
^~~~~~

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011080006.31081-1-rdunlap@infradead.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau/fifo: Reinstate the correct engine bit programming

Commit 64f7c698bea9 ("drm/nouveau/fifo: add engine_id hook") replaced
fifo/chang84.c g84_fifo_chan_engine() call with an indirect call of
fifo/g84.c g84_fifo_engine_id(). The G84_FIFO_ENGN_* values returned
from the later g84_fifo_engine_id() are incremented by 1 compared to
the previous g84_fifo_chan_engine() return values.

This is fine either way for most of the code, except this one line
where an engine bit programmed into the hardware is derived from the
return value. Decrement the return value accordingly, otherwise the
wrong engine bit is programmed into the hardware and that leads to
the following failure:
nouveau 0000:01:00.0: gr: 00000030 [ILLEGAL_MTHD ILLEGAL_CLASS] ch 1 [003fbce000 DRM] subc 3 class 0000 mthd 085c data 00000420

On the following hardware:
lspci -s 01:00.0
01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2)
lspci -ns 01:00.0
01:00.0 0300: 10de:0a3c (rev a2)

Fixes: 64f7c698bea9 ("drm/nouveau/fifo: add engine_id hook")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: <stable@vger.kernel.org> # 5.12+
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007214117.231472-1-marex@denx.de
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/hyperv: Fix double mouse pointers

Hyper-V supports a hardware cursor feature. It is not used by Linux VM,
but the Hyper-V host still draws a point as an extra mouse pointer,
which is unwanted, especially when Xorg is running.

The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted pointer.
When the hyperv_drm driver was developed, the function synthvid_send_ptr()
was not copied from the hyperv_fb driver. Fix the issue by adding the
function into hyperv_drm.

Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916193644.45650-1-decui@microsoft.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/fbdev: Clamp fbdev surface size if too large

Clamp the fbdev surface size of the available maximumi height to avoid
failing to init console emulation. An example error is shown below.

  bad framebuffer height 2304, should be >= 768 && <= 768
  [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
  simple-framebuffer simple-framebuffer.0: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22)

This is especially a problem with drivers that have very small screen
sizes and cannot over-allocate at all.

v2:
* reduce warning level (Ville)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 11e8f5fd223b ("drm: Add simpledrm driver")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Amanoel Dawod <kernel@amanoeldawod.com>
Reported-by: Zoltán Kővágó <dirty.ice.hu@gmail.com>
Reported-by: Michael Stapelberg <michael+lkml@stapelberg.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20211005070355.7680-1-tzimmermann@suse.de
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read

In commit e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid
corruption test") the function connector_bad_edid() started assuming
that the memory for the EDID passed to it was big enough to hold
`edid[0x7e] + 1` blocks of data (1 extra for the base block). It
completely ignored the fact that the function was passed `num_blocks`
which indicated how much memory had been allocated for the EDID.

Let's fix this by adding a bounds check.

This is important for handling the case where there's an error in the
first block of the EDID. In that case we will call
connector_bad_edid() without having re-allocated memory based on
`edid[0x7e]`.

Fixes: e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005192905.v2.1.Ib059f9c23c2611cb5a9d760e7d0a700c1295928d@changeid
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'mediatek-drm-fixes-5.15' of https://git./linux/kernel/git/chunkuang.hu/linux into drm-fixes

Mediatek DRM Fixes for Linux 5.15

1. Revert series "CMDQ refinement of Mediatek DRM driver"

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013235044.5488-1-chunkuang.hu@kernel.org

ARM: imx: register reset controller from a platform driver

Starting with commit 6b2117ad65f1 ("of: property: fw_devlink: Add
support for "resets" and "pwms""), the imx-drm driver fails to load
due to forever dormant devlinks to the reset-controller node. This
node was never associated with a struct device.

Add a platform device to allow fw_devnode to activate the devlinks.

Fixes: 6b2117ad65f1 ("of: property: fw_devlink: Add support for "resets" and "pwms"")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'drm-intel-fixes-2021-10-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.15-rc6:
- Fix ACPI object leak
- Fix context leak in user proto-context creation
- Fix missing i915_sw_fence_fini call

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zgrbvgls.fsf@intel.com

Merge tag 'net-5.15-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Quite calm.

  The noisy DSA driver (embedded switches) changes, and adjustment to
  IPv6 IOAM behavior add to diffstat's bottom line but are not scary.

  Current release - regressions:

   - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards
     compatibility

   - procfs: revert "add seq_puts() statement for dev_mcast", minor
     format change broke user space

  Current release - new code bugs:

   - dsa: fix bridge_num not getting cleared after ports leaving the
     bridge, resource leak

   - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware
     bridges using VID 0, prevent packet drops if pvid is removed

   - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW
     getting confused about station to VLAN mapping

  Previous releases - regressions:

   - virtio-net: fix for skb_over_panic inside big mode

   - phy: do not shutdown PHYs in READY state

   - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link
     LED staying lit after ifdown

   - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL)

   - mqprio: Correct stats in mqprio_dump_class_stats()

   - ice: fix deadlock for Tx timestamp tracking flush

   - stmmac: fix feature detection on old hardware

  Previous releases - always broken:

   - sctp: account stream padding length for reconf chunk

   - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe()

   - isdn: cpai: check ctr->cnr to avoid array index out of bound

   - isdn: mISDN: fix sleeping function called from invalid context

   - nfc: nci: fix potential UAF of rf_conn_info object

   - dsa: microchip: prevent ksz_mib_read_work from kicking back in
     after it's canceled in .remove and crashing

   - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged
     ports

   - dsa: sja1105, ocelot: break circular dependency between switch and
     tag drivers

   - dsa: felix: improve timestamping in presence of packe loss

   - mlxsw: thermal: fix out-of-bounds memory accesses

  Misc:

   - ipv6: ioam: move the check for undefined bits to improve
     interoperability"

* tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
  icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe
  MAINTAINERS: Update the devicetree documentation path of imx fec driver
  sctp: account stream padding length for reconf chunk
  mlxsw: thermal: Fix out-of-bounds memory accesses
  ethernet: s2io: fix setting mac address during resume
  NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
  NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
  nfc: fix error handling of nfc_proto_register()
  Revert "net: procfs: add seq_puts() statement for dev_mcast"
  net: encx24j600: check error in devm_regmap_init_encx24j600
  net: korina: select CRC32
  net: arc: select CRC32
  net: dsa: felix: break at first CPU port during init and teardown
  net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports
  net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent
  net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib
  net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver
  net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header
  net: mscc: ocelot: deny TX timestamping of non-PTP packets
  net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb
  ...

selftests: netfilter: remove stray bash debug line

This should not be there.

Fixes: 2de03b45236f ("selftests: netfilter: add flowtable test script")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipvs: make global sysctl readonly in non-init netns

Because the data pointer of net/ipv4/vs/debug_level is not updated per
netns, it must be marked as read-only in non-init netns.

Fixes: c6d2d445d8de ("IPVS: netns, final patch enabling network name space.")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ip6t_rt: fix rt0_hdr parsing in rt_mt6

In rt_mt6(), when it's a nonlinear skb, the 1st skb_header_pointer()
only copies sizeof(struct ipv6_rt_hdr) to _route that rh points to.
The access by ((const struct rt0_hdr *)rh)->reserved will overflow
the buffer. So this access should be moved below the 2nd call to
skb_header_pointer().

Besides, after the 2nd skb_header_pointer(), its return value should
also be checked, othersize, *rp may cause null-pointer-ref.

v1->v2:
- clean up some old debugging log.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

libperf tests: Fix test_stat_cpu

The `cpu` argument of perf_evsel__read() must specify the cpu index.

perf_cpu_map__for_each_cpu() is for iterating the cpu number (not index)
and is thus not appropriate for use with perf_evsel__read().

So, if there is an offline CPU, the cpu number specified in the argument
may point out of range because the cpu number and the cpu index are
different.

Fix test_stat_cpu().

Testing it:

  # make tests -C tools/lib/perf/
  make: Entering directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'
  running static:
  - running tests/test-cpumap.c...OK
  - running tests/test-threadmap.c...OK
  - running tests/test-evlist.c...OK
  - running tests/test-evsel.c...OK
  running dynamic:
  - running tests/test-cpumap.c...OK
  - running tests/test-threadmap.c...OK
  - running tests/test-evlist.c...OK
  - running tests/test-evsel.c...OK
  make: Leaving directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'

Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211011083704.4108720-1-nakamura.shun@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

libperf test evsel: Fix build error on !x86 architectures

In test_stat_user_read, following build error occurs except i386 and
x86_64 architectures:

tests/test-evsel.c:129:31: error: variable 'pc' set but not used [-Werror=unused-but-set-variable]
struct perf_event_mmap_page *pc;

Fix build error.

Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211006095703.477826-1-nakamura.shun@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Output non-zero offset for decompressed records

Print offset of PERF_RECORD_COMPRESSED record instead of zero for
decompressed records in raw trace dump (-D option of perf-report):

0x17cf08 [0x28]: event: 9

instead of:

0 [0x28]: event: 9

The fix is not critical, because currently file_pos for compressed
events is used in perf_session__process_event only to show offsets
in the raw dump.

This patch was separated from patchset:

https://lore.kernel.org/lkml/cover.1629186429.git.alexey.v.bayduraev@linux.intel.com/

and was already rewieved.

Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210929091445.18274-1-alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

ice: Print the api_patch as part of the fw.mgmt.api

Currently when a user uses "devlink dev info", the fw.mgmt.api will be
the major.minor numbers as shown below:

devlink dev info pci/0000:3b:00.0
pci/0000:3b:00.0:
  driver ice
  serial_number 00-01-00-ff-ff-00-00-00
  versions:
      fixed:
        board.id K91258-000
      running:
        fw.mgmt 6.1.2
        fw.mgmt.api 1.7 <--- No patch number included
        fw.mgmt.build 0xd75e7d06
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.app.name ICE OS Default Package
        fw.app 1.3.27.0
        fw.app.bundle_id 0xc0000001
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110
      stored:
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110

There are many features in the driver that depend on the major, minor,
and patch version of the FW. Without the patch number in the output for
fw.mgmt.api debugging issues related to the FW API version is difficult.
Also, using major.minor.patch aligns with the existing firmware version
which uses a 3 digit value.

Fix this by making the fw.mgmt.api print the major.minor.patch
versions. Shown below is the result:

devlink dev info pci/0000:3b:00.0
pci/0000:3b:00.0:
  driver ice
  serial_number 00-01-00-ff-ff-00-00-00
  versions:
      fixed:
        board.id K91258-000
      running:
        fw.mgmt 6.1.2
        fw.mgmt.api 1.7.9 <--- patch number included
        fw.mgmt.build 0xd75e7d06
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.app.name ICE OS Default Package
        fw.app 1.3.27.0
        fw.app.bundle_id 0xc0000001
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110
      stored:
        fw.mgmt.srev 5
        fw.undi 1.2992.0
        fw.undi.srev 5
        fw.psid.api 3.10
        fw.bundle_id 0x800085cc
        fw.netlist 3.10.2000-3.1e.0
        fw.netlist.build 0x2a76e110

Fixes: ff2e5c700e08 ("ice: add basic handler for devlink .info_get")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: fix getting UDP tunnel entry

Correct parameters order in call to ice_tunnel_idx_to_entry function.

Entry in sparse port table is correct when the idx is 0. For idx 1 one
correct entry should be skipped, for idx 2 two of them should be skipped
etc. Change if condition to be true when idx is 0, which means that
previous valid entry of this tunnel type were skipped.

Fixes: b20e6c17c468 ("ice: convert to new udp_tunnel infrastructure")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: Avoid crash from unnecessary IDA free

In the remove path, there is an attempt to free the aux_idx IDA whether
it was allocated or not. This can potentially cause a crash when
unloading the driver on systems that do not initialize support for RDMA.
But, this free cannot be gated by the status bit for RDMA, since it is
allocated if the driver detects support for RDMA at probe time, but the
driver can enter into a state where RDMA is not supported after the IDA
has been allocated at probe time and this would lead to a memory leak.

Initialize aux_idx to an invalid value and check for a valid value when
unloading to determine if an IDA free is necessary.

Fixes: d25a0fc41c1f9 ("ice: Initialize RDMA support")
Reported-by: Jun Miao <jun.miao@windriver.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: Fix failure to re-add LAN/RDMA Tx queues

Currently if the VSI is rebuilt/removed and the RDMA PF driver is active
the RDMA Tx queue scheduler node configuration will not be cleaned up.
This will cause the rebuild/re-add of the VSI to fail due to the
software structures not being correctly cleaned up for the VSI index.
Fix this by always calling ice_rm_vsi_rdma_cfg() for all VSI. If there
are no RDMA scheduler nodes created, then there is no harm in calling
ice_rm_vsi_rdma_cfg(). This change applies to all VSI types, so if
RDMA support is added for other VSI types they will also get this
change.

Fixes: 348048e724a0 ("ice: Implement iidc operations")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Jerzy Wiktor Jurkowski <jerzy.wiktor.jurkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Merge tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme into block-5.15

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.15:

- fix the abort command id (Keith Busch)
- nvme: fix per-namespace chardev deletion (Adam Manzanares)"

* tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme:
nvme: fix per-namespace chardev deletion
nvme-pci: Fix abort command id

io_uring: fix wrong condition to grab uring lock

Grab uring lock when we are in io-worker rather than in the original
or system-wq context since we already hold it in these two situation.

Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Fixes: b66ceaf324b3 ("io_uring: move iopoll reissue into regular IO path")
Link: https://lore.kernel.org/r/20211014140400.50235-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe

In icmp_build_probe(), the icmp_ext_echo_iio parsing should be done
step by step and skb_header_pointer() return value should always be
checked, this patch fixes 3 places in there:

  - On case ICMP_EXT_ECHO_CTYPE_NAME, it should only copy ident.name
    from skb by skb_header_pointer(), its len is ident_len. Besides,
    the return value of skb_header_pointer() should always be checked.

  - On case ICMP_EXT_ECHO_CTYPE_INDEX, move ident_len check ahead of
    skb_header_pointer(), and also do the return value check for
    skb_header_pointer().

  - On case ICMP_EXT_ECHO_CTYPE_ADDR, before accessing iio->ident.addr.
    ctype3_hdr.addrlen, skb_header_pointer() should be called first,
    then check its return value and ident_len.
    On subcases ICMP_AFI_IP and ICMP_AFI_IP6, also do check for ident.
    addr.ctype3_hdr.addrlen and skb_header_pointer()'s return value.
    On subcase ICMP_AFI_IP, the len for skb_header_pointer() should be
    "sizeof(iio->extobj_hdr) + sizeof(iio->ident.addr.ctype3_hdr) +
    sizeof(struct in_addr)" or "ident_len".

v1->v2:
  - To make it more clear, call skb_header_pointer() once only for
    iio->indent's parsing as Jakub Suggested.
v2->v3:
  - The extobj_hdr.length check against sizeof(_iio) should be done
    before calling skb_header_pointer(), as Eric noticed.

Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/31628dd76657ea62f5cf78bb55da6b35240831f1.1634205050.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: Update the devicetree documentation path of imx fec driver

Change the devicetree documentation path
to "Documentation/devicetree/bindings/net/fsl,fec.yaml"
since 'fsl-fec.txt' has been converted to 'fsl,fec.yaml' already.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211014110214.3254-1-caihuoqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp: account stream padding length for reconf chunk

sctp_make_strreset_req() makes repeated calls to sctp_addto_chunk()
which will automatically account for padding on each call. inreq and
outreq are already 4 bytes aligned, but the payload is not and doing
SCTP_PAD4(a + b) (which _sctp_make_chunk() did implicitly here) is
different from SCTP_PAD4(a) + SCTP_PAD4(b) and not enough. It led to
possible attempt to use more buffer than it was allocated and triggered
a BUG_ON.

Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Fixes: cc16f00f6529 ("sctp: add support for generating stream reconf ssn reset request chunk")
Reported-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/b97c1f8b0c7ff79ac4ed206fc2c49d3612e0850c.1634156849.git.mleitner@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: thermal: Fix out-of-bounds memory accesses

Currently, mlxsw allows cooling states to be set above the maximum
cooling state supported by the driver:

# cat /sys/class/thermal/thermal_zone2/cdev0/type
mlxsw_fan
# cat /sys/class/thermal/thermal_zone2/cdev0/max_state
10
# echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state
# echo $?
0

This results in out-of-bounds memory accesses when thermal state
transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the
transition table is accessed with a too large index (state) [1].

According to the thermal maintainer, it is the responsibility of the
driver to reject such operations [2].

Therefore, return an error when the state to be set exceeds the maximum
cooling state supported by the driver.

To avoid dead code, as suggested by the thermal maintainer [3],
partially revert commit a421ce088ac8 ("mlxsw: core: Extend cooling
device with cooling levels") that tried to interpret these invalid
cooling states (above the maximum) in a special way. The cooling levels
array is not removed in order to prevent the fans going below 20% PWM,
which would cause them to get stuck at 0% PWM.

[1]
BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290
Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5

CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122
Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016
Workqueue: events_freezable_power_ thermal_zone_device_check
Call Trace:
dump_stack_lvl+0x8b/0xb3
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x7f/0x11b
thermal_cooling_device_stats_update+0x271/0x290
__thermal_cdev_update+0x15e/0x4e0
thermal_cdev_update+0x9f/0xe0
step_wise_throttle+0x770/0xee0
thermal_zone_device_update+0x3f6/0xdf0
process_one_work+0xa42/0x1770
worker_thread+0x62f/0x13e0
kthread+0x3ee/0x4e0
ret_from_fork+0x1f/0x30

Allocated by task 1:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
thermal_cooling_device_setup_sysfs+0x153/0x2c0
__thermal_cooling_device_register.part.0+0x25b/0x9c0
thermal_cooling_device_register+0xb3/0x100
mlxsw_thermal_init+0x5c5/0x7e0
__mlxsw_core_bus_device_register+0xcb3/0x19c0
mlxsw_core_bus_device_register+0x56/0xb0
mlxsw_pci_probe+0x54f/0x710
local_pci_probe+0xc6/0x170
pci_device_probe+0x2b2/0x4d0
really_probe+0x293/0xd10
__driver_probe_device+0x2af/0x440
driver_probe_device+0x51/0x1e0
__driver_attach+0x21b/0x530
bus_for_each_dev+0x14c/0x1d0
bus_add_driver+0x3ac/0x650
driver_register+0x241/0x3d0
mlxsw_sp_module_init+0xa2/0x174
do_one_initcall+0xee/0x5f0
kernel_init_freeable+0x45a/0x4de
kernel_init+0x1f/0x210
ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff8881052f7800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 1016 bytes inside of
1024-byte region [ffff8881052f7800, ffff8881052f7c00)
The buggy address belongs to the page:
page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0
head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x200000000010200(slab|head|node=0|zone=2)
raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc
ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

[2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/
[3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/

CC: Daniel Lezcano <daniel.lezcano@linaro.org>
Fixes: a50c1e35650b ("mlxsw: core: Implement thermal zone")
Fixes: a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ethernet: s2io: fix setting mac address during resume

After recent cleanups, gcc started warning about a suspicious
memcpy() call during the s2io_io_resume() function:

In function '__dev_addr_set',
    inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2,
    inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2,
    inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7:
arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict]
  182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n)
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy'
4648 |         memcpy(dev->dev_addr, addr, len);
      |         ^~~~~~

What apparently happened is that an old cleanup changed the calling
conventions for s2io_set_mac_addr() from taking an ethernet address
as a character array to taking a struct sockaddr, but one of the
callers was not changed at the same time.

Change it to instead call the low-level do_s2io_prog_unicast() function
that still takes the old argument type.

Fixes: 2fd376884558 ("S2io: Added support set_mac_address driver entry point")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211013143613.2049096-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: Update entry for the Stratix10 firmware

Richard Gong is no longer at Intel, so update the MAINTAINER's entry for
the Stratix10 firmware drivers.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'sound-5.15-rc6' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"This contains quite a few device-specific fixes for usual HD- and
  USB-audio in addition to a couple of ALSA core fixes (a UAF fix in
  sequencer and a fix for a misplaced PCM 32bit compat ioctl).

  Nothing really stands out"

* tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Add quirk for VF0770
  ALSA: hda: avoid write to STATESTS if controller is in reset
  ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW
  ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl
  ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2
  ALSA: hda: intel: Allow repeatedly probing on codec configuration errors
  ALSA: hda/realtek: Add quirk for TongFang PHxTxX1
  ALSA: hda/realtek - ALC236 headset MIC recording issue
  ALSA: usb-audio: Enable rate validation for Scarlett devices
  ALSA: hda/realtek: Add quirk for Clevo X170KM-G
  ALSA: hda/realtek: Complete partial device name to avoid ambiguity
  ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254
  ALSA: seq: Fix a potential UAF by wrong private_free call order
  ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop
  ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer

ALSA: hda/realtek: Add quirk for Clevo PC50HS

Apply existing PCI quirk to the Clevo PC50HS and related models to fix
audio output on the built in speakers.

Signed-off-by: Steven Clarkson <sc@lambdal.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211014133554.1326741-1-sc@lambdal.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: add Schiit Hel device to quirk table

The Shciit Hel device responds to the ctl message for the mic capture
switch with a timeout of -EPIPE:

usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1

This seems safe to ignore as the device works properly with the control
message quirk, so add it to the quirk table so all is good.

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/YWgR3nOI1osvr5Yo@kroah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

spi-mux: Fix false-positive lockdep splats

io_mutex is taken by spi_setup() and spi-mux's .setup() callback calls
spi_setup() which results in a nested lock of io_mutex.

add_lock is taken by spi_add_device(). The device_add() call in there
can result in calling spi-mux's .probe() callback which registers its
own spi controller which in turn results in spi_add_device() being
called again.

To fix this initialize the controller's locks already in
spi_alloc_controller() to give spi_mux_probe() a chance to set the
lockdep subclass.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211013133710.2679703-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

spi: Fix deadlock when adding SPI controllers on SPI buses

Currently we have a global spi_add_lock which we take when adding new
devices so that we can check that we're not trying to reuse a chip
select that's already controlled. This means that if the SPI device is
itself a SPI controller and triggers the instantiation of further SPI
devices we trigger a deadlock as we try to register and instantiate
those devices while in the process of doing so for the parent controller
and hence already holding the global spi_add_lock. Since we only care
about concurrency within a single SPI bus move the lock to be per
controller, avoiding the deadlock.

This can be easily triggered in the case of spi-mux.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

EDAC/armada-xp: Fix output of uncorrectable error counter

The number of correctable errors is displayed as uncorrectable
errors because the "SBE" error count is passed to both calls of
edac_mc_handle_error().

Pass the correct uncorrectable error count to the second
edac_mc_handle_error() call when logging uncorrectable errors.

[ bp: Massage commit message. ]

Fixes: 7f6998a41257 ("ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC")
Signed-off-by: Hans Potsch <hans.potsch@nokia.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20211006121332.58788-1-hans.potsch@nokia.com

nvme: fix per-namespace chardev deletion

Decrease reference count of chardevice during char device deletion in
order to fix a memory leak. Add a release callabck for the device
associated chardev and move ida_simple_remove into the release function.

Fixes: 2637baed7801 ("nvme: introduce generic per-namespace chardev")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Javier GonzÃ¡lez <javier@javigon.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators()

I got a null-ptr-deref report:

KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
...
RIP: 0010:regulator_enable+0x84/0x260
...
Call Trace:
ahci_platform_enable_regulators+0xae/0x320
ahci_platform_enable_resources+0x1a/0x120
ahci_probe+0x4f/0x1b9
platform_probe+0x10b/0x280
...
entry_SYSCALL_64_after_hwframe+0x44/0xae

If devm_regulator_get() in ahci_platform_get_resources() fails,
hpriv->phy_regulator will point to NULL, when enabling or disabling it,
null-ptr-deref will occur.

ahci_probe()
ahci_platform_get_resources()
devm_regulator_get(, "phy") // failed, let phy_regulator = NULL
ahci_platform_enable_resources()
ahci_platform_enable_regulators()
regulator_enable(hpriv->phy_regulator) // null-ptr-deref

commit 962399bb7fbf ("ata: libahci_platform: Fix regulator_get_optional()
misuse") replaces devm_regulator_get_optional() with devm_regulator_get(),
but PHY regulator omits to delete "hpriv->phy_regulator = NULL;" like AHCI.
Delete it like AHCI regulator to fix this bug.

Fixes: commit 962399bb7fbf ("ata: libahci_platform: Fix regulator_get_optional() misuse")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>

Merge branch 'fix-two-possible-memory-leak-problems-in-nfc-digital-module'

Ziyang Xuan says:

====================
Fix two possible memory leak problems in NFC digital module.
====================

Link: https://lore.kernel.org/r/cover.1634111083.git.william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

NFC: digital: fix possible memory leak in digital_in_send_sdd_req()

'skb' is allocated in digital_in_send_sdd_req(), but not free when
digital_in_send_cmd() failed, which will cause memory leak. Fix it
by freeing 'skb' if digital_in_send_cmd() return failed.

Fixes: 2c66daecc409 ("NFC Digital: Add NFC-A technology support")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()

'params' is allocated in digital_tg_listen_mdaa(), but not free when
digital_send_cmd() failed, which will cause memory leak. Fix it by
freeing 'params' if digital_send_cmd() return failed.

Fixes: 1c7a4c24fbfd ("NFC Digital: Add target NFC-DEP support")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: fix error handling of nfc_proto_register()

When nfc proto id is using, nfc_proto_register() return -EBUSY error
code, but forgot to unregister proto. Fix it by adding proto_unregister()
in the error handling case.

Fixes: c7fe3b52c128 ("NFC: add NFC socket family")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211013034932.2833737-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "net: procfs: add seq_puts() statement for dev_mcast"

This reverts commit ec18e8455484370d633a718c6456ddbf6eceef21.

It turns out that there are user space programs which got broken by that
change. One example is the "ifstat" program shipped by Debian:
https://packages.debian.org/source/bullseye/ifstat
which, confusingly enough, seems to not have anything in common with the
much more familiar (at least to me) ifstat program from iproute2:
https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/tree/misc/ifstat.c

root@debian:~# ifstat
ifstat: /proc/net/dev: unsupported format.

This change modified the header (first two lines of text) in
/proc/net/dev so that it looks like this:

root@debian:~# cat /proc/net/dev
Interface|                            Receive                                       |                                 Transmit
         |            bytes      packets errs   drop fifo frame compressed multicast|            bytes      packets errs   drop fifo colls carrier compressed
       lo:            97400         1204    0      0    0     0          0         0            97400         1204    0      0    0     0       0          0
    bond0:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
     sit0:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
     eno2:          5002206         6651    0      0    0     0          0         0        105518642      1465023    0      0    0     0       0          0
     swp0:           134531         2448    0      0    0     0          0         0         99599598      1464381    0      0    0     0       0          0
     swp1:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
     swp2:          4867675         4203    0      0    0     0          0         0            58134          631    0      0    0     0       0          0
    sw0p0:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
    sw0p1:           124739         2448    0   1422    0     0          0         0         93741184      1464369    0      0    0     0       0          0
    sw0p2:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
    sw2p0:          4850863         4203    0      0    0     0          0         0            54722          619    0      0    0     0       0          0
    sw2p1:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
    sw2p2:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
    sw2p3:                0            0    0      0    0     0          0         0                0            0    0      0    0     0       0          0
      br0:            10508          212    0    212    0     0          0       212         61369558       958857    0      0    0     0       0          0

whereas before it looked like this:

root@debian:~# cat /proc/net/dev
Inter-|   Receive                                                |  Transmit
face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:   13160     164    0    0    0     0          0         0    13160     164    0    0    0     0       0          0
bond0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  sit0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eno2:   30824     268    0    0    0     0          0         0     3332      37    0    0    0     0       0          0
  swp0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  swp1:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  swp2:   30824     268    0    0    0     0          0         0     2428      27    0    0    0     0       0          0
sw0p0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
sw0p1:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
sw0p2:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
sw2p0:   29752     268    0    0    0     0          0         0     1564      17    0    0    0     0       0          0
sw2p1:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
sw2p2:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
sw2p3:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

The reason why the ifstat shipped by Debian (v1.1, with a Debian patch
upgrading it to 1.1-8.1 at the time of writing) is broken is because its
"proc" driver/backend parses the header very literally:

main/drivers.c#L825
  if (!data->checked && strncmp(buf, "Inter-|", 7))
    goto badproc;

and there's no way in which the header can be changed such that programs
parsing like that would not get broken.

Even if we fix this ancient and very "lightly" maintained program to
parse the text output of /proc/net/dev in a more sensible way, this
story seems bound to repeat again with other programs, and modifying
them all could cause more trouble than it's worth. On the other hand,
the reverted patch had no other reason than an aesthetic one, so
reverting it is the simplest way out.

I don't know what other distributions would be affected; the fact that
Debian doesn't ship the iproute2 version of the program (a different
code base altogether, which uses netlink and not /proc/net/dev) is
surprising in itself.

Fixes: ec18e8455484 ("net: procfs: add seq_puts() statement for dev_mcast")
Link: https://lore.kernel.org/netdev/20211009163511.vayjvtn3rrteglsu@skbuf/
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211013001909.3164185-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests/ftrace: Update test for more eprobe removal process

The removal of eprobes was broken and missed in testing. Add various ways
to remove eprobes that are considered acceptable to the testing process to
catch when/if they break again.

Link: https://lkml.kernel.org/r/20211013205533.836644549@goodmis.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Fix event probe removal from dynamic events

When an event probe is to be removed via the API that created it via the
dynamic events, an -ENOENT error is returned.

This is because the removal of the event probe does not expect to see the
event system and name that the event probe is attached to, even though
that's part of the API to create it. As the removal of probes is to use
the same API as they are created.

In fact, the removal is not consistent with the kprobes and uprobes
removal. Fix that by allowing various ways to remove the eprobe.

The eprobe is created with:

e:[GROUP/]NAME SYSTEM/EVENT [OPTIONS]

Have it get removed by echoing in the following into dynamic_events:

# Remove all eprobes with NAME
echo '-:NAME' >> dynamic_events

# Remove a specific eprobe
echo '-:GROUP/NAME' >> dynamic_events
echo '-:GROUP/NAME SYSTEM/EVENT' >> dynamic_events
echo '-:NAME SYSTEM/EVENT' >> dynamic_events
echo '-:GROUP/NAME SYSTEM/EVENT OPTIONS' >> dynamic_events
echo '-:NAME SYSTEM/EVENT OPTIONS' >> dynamic_events

Link: https://lkml.kernel.org/r/20211012081925.0e19cc4f@gandalf.local.home
Link: https://lkml.kernel.org/r/20211013205533.630722129@goodmis.org
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

net: encx24j600: check error in devm_regmap_init_encx24j600

devm_regmap_init may return error which caused by like out of memory,
this will results in null pointer dereference later when reading
or writing register:

general protection fault in encx24j600_spi_probe
KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097]
CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540
Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00
RSP: 0018:ffffc900010476b8 EFLAGS: 00010207
RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000
RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094
RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a
R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001
R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08
FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459
spi_probe drivers/spi/spi.c:397
really_probe drivers/base/dd.c:517
__driver_probe_device drivers/base/dd.c:751
driver_probe_device drivers/base/dd.c:782
__device_attach_driver drivers/base/dd.c:899
bus_for_each_drv drivers/base/bus.c:427
__device_attach drivers/base/dd.c:971
bus_probe_device drivers/base/bus.c:487
device_add drivers/base/core.c:3364
__spi_add_device drivers/spi/spi.c:599
spi_add_device drivers/spi/spi.c:641
spi_new_device drivers/spi/spi.c:717
new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e]
dev_attr_store drivers/base/core.c:2074
sysfs_kf_write fs/sysfs/file.c:139
kernfs_fop_write_iter fs/kernfs/file.c:300
new_sync_write fs/read_write.c:508 (discriminator 4)
vfs_write fs/read_write.c:594
ksys_write fs/read_write.c:648
do_syscall_64 arch/x86/entry/common.c:50
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113

Add error check in devm_regmap_init_encx24j600 to avoid this situation.

Fixes: 04fbfce7a222 ("net: Microchip encx24j600 driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Link: https://lore.kernel.org/r/20211012125901.3623144-1-sunnanyong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mlx5-fixes-2021-10-12' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2021-10-12

* tag 'mlx5-fixes-2021-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Fix division by 0 in mlx5e_select_queue for representors
  net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp
  net/mlx5e: Switchdev representors are not vlan challenged
  net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path
  net/mlx5e: Allow only complete TXQs partition in MQPRIO channel mode
  net/mlx5: Fix cleanup of bridge delayed work
====================

Link: https://lore.kernel.org/r/20211012205323.20123-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: korina: select CRC32

Fix the following build/link error by adding a dependency on the CRC32
routines:

ld: drivers/net/ethernet/korina.o: in function `korina_multicast_list':
korina.c:(.text+0x1af): undefined reference to `crc32_le'

Fixes: ef11291bcd5f9 ("Add support the Korina (IDT RC32434) Ethernet MAC")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Florian fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211012152509.21771-1-vegard.nossum@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

iommu/arm: fix ARM_SMMU_QCOM compilation

My previous bugfix ended up making things worse for the QCOM IOMMU
driver when it forgot to add the Kconfig symbol that is getting used to
control the compilation of the SMMU implementation specific code
for Qualcomm.

Fixes: 424953cf3c66 ("qcom_scm: hide Kconfig symbol")
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/lkml/20211010023350.978638-1-dmitry.baryshkov@linaro.org/
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'optee-fix2-for-v5.15' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes

Fix missing devices unregister during optee_remove

Unregisters OP-TEE client devices (UUIDs of some known Trusted
Applications) from the TEE bus when the OP-TEE driver is unloaded.

* tag 'optee-fix2-for-v5.15' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: Fix missing devices unregister during optee_remove

Link: https://lore.kernel.org/r/20211013122854.GA1542549@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-soc/for-5.15/devicetree' of https://github.com/Broadcom/stblinux into arm/fixes

This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.15, please pull the following:

- Stefan fixes the VEC (video encoder) bus address for 2711, fixes the
  MDIO bus controller #address-cells/#size-cells inversion and the SDIO
  regulator voltage ranges

- Nicolas fixes DTC warnings for the PCIe host bridge and its child
  USB device

* tag 'arm-soc/for-5.15/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
  ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
  ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
  ARM: dts: bcm2711: fix MDIO #address- and #size-cells
  ARM: dts: bcm283x: Fix VEC address for BCM2711

Link: https://lore.kernel.org/r/20211012213841.1872021-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

clk: qcom: add select QCOM_GDSC for SM6350

QCOM_GDSC is needed for the gcc driver to probe.

Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20211007212444.328034-2-luca@z3ntu.xyz
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc

It looks that the offset 0x7d060 is a copy & paste from above
hlos1_vote_turing_mmu_tbu1_gdsc. Correct it to 0x7d07c as per
downstream kernel.

Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210919022308.24046-1-shawn.guo@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

net: arc: select CRC32

Fix the following build/link error by adding a dependency on the CRC32
routines:

ld: drivers/net/ethernet/arc/emac_main.o: in function `arc_emac_set_rx_mode':
emac_main.c:(.text+0xb11): undefined reference to `crc32_le'

The crc32_le() call comes through the ether_crc_le() call in
arc_emac_set_rx_mode().

[v2: moved the select to ARC_EMAC_CORE; the Makefile is a bit confusing,
but the error comes from emac_main.o, which is part of the arc_emac module,
which in turn is enabled by CONFIG_ARC_EMAC_CORE. Note that arc_emac is
different from emac_arc...]

Fixes: 775dd682e2b0ec ("arc_emac: implement promiscuous mode and multicast filtering")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20211012093446.1575-1-vegard.nossum@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ASoC: wm8960: Fix clock configuration on slave mode

There is a noise issue for 8kHz sample rate on slave mode.
Compared with master mode, the difference is the DACDIV
setting, after correcting the DACDIV, the noise is gone.

There is no noise issue for 48kHz sample rate, because
the default value of DACDIV is correct for 48kHz.

So wm8960_configure_clocking() should be functional for
ADC and DAC function even if it is slave mode.

In order to be compatible for old use case, just add
condition for checking that sysclk is zero with
slave mode.

Fixes: 0e50b51aa22f ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1634102224-3922-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'modules-for-v5.15-rc6' of git://git./linux/kernel/git/jeyu/linux

Pull modules fix from Jessica Yu:

- Build fix for cfi_init() when CONFIG_MODULE_UNLOAD=n

* tag 'modules-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: fix clang CFI with MODULE_UNLOAD=n

nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells

If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic

*p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0);

will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we
subtract one from that making a large number that is then shifted more than the
number of bits that fit into an unsigned long.

UBSAN reports this problem:

UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8
shift exponent 64 is too large for 64-bit type 'unsigned long'
CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9
Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
  dump_backtrace+0x0/0x170
  show_stack+0x24/0x30
  dump_stack_lvl+0x64/0x7c
  dump_stack+0x18/0x38
  ubsan_epilogue+0x10/0x54
  __ubsan_handle_shift_out_of_bounds+0x180/0x194
  __nvmem_cell_read+0x1ec/0x21c
  nvmem_cell_read+0x58/0x94
  nvmem_cell_read_variable_common+0x4c/0xb0
  nvmem_cell_read_variable_le_u32+0x40/0x100
  a6xx_gpu_init+0x170/0x2f4
  adreno_bind+0x174/0x284
  component_bind_all+0xf0/0x264
  msm_drm_bind+0x1d8/0x7a0
  try_to_bring_up_master+0x164/0x1ac
  __component_add+0xbc/0x13c
  component_add+0x20/0x2c
  dp_display_probe+0x340/0x384
  platform_probe+0xc0/0x100
  really_probe+0x110/0x304
  __driver_probe_device+0xb8/0x120
  driver_probe_device+0x4c/0xfc
  __device_attach_driver+0xb0/0x128
  bus_for_each_drv+0x90/0xdc
  __device_attach+0xc8/0x174
  device_initial_probe+0x20/0x2c
  bus_probe_device+0x40/0xa4
  deferred_probe_work_func+0x7c/0xb8
  process_one_work+0x128/0x21c
  process_scheduled_works+0x40/0x54
  worker_thread+0x1ec/0x2a8
  kthread+0x138/0x158
  ret_from_fork+0x10/0x20

Fix it by making sure there are any bits to mask out.

Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211013124511.18726-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost-vdpa: Fix the wrong input in config_cb

Fix the wrong input in for config_cb. In function vhost_vdpa_config_cb,
the input cb.private was used as struct vhost_vdpa, so the input was
wrong here, fix this issue

Fixes: 776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa")
Signed-off-by: Cindy Lu <lulu@redhat.com>
Link: https://lore.kernel.org/r/20210929090933.20465-1-lulu@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

VDUSE: fix documentation underline warning

Fix a VDUSE documentation build warning:

Documentation/userspace-api/vduse.rst:21: WARNING: Title underline too short.

Fixes: 7bc7f61897b6 ("Documentation: Add documentation for VDUSE")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Xie Yongji <xieyongji@bytedance.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20211006202904.30241-1-rdunlap@infradead.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>

s390: add Alexander Gordeev as reviewer

Alexander Gordeev will help reviewing s390 code.

Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Revert "virtio-blk: Add validation for block size in config space"

It turns out that access to config space before completing the feature
negotiation is broken for big endian guests at least with QEMU hosts up
to 6.1 inclusive. This affects any device that accesses config space in
the validate callback: at the moment that is virtio-net with
VIRTIO_NET_F_MTU but since 82e89ea077b9 ("virtio-blk: Add validation for
block size in config space") that also started affecting virtio-blk with
VIRTIO_BLK_F_BLK_SIZE. Further, unlike VIRTIO_NET_F_MTU which is off by
default on QEMU, VIRTIO_BLK_F_BLK_SIZE is on by default, which resulted
in lots of people not being able to boot VMs on BE.

The spec is very clear that what we are doing is legal so QEMU needs to
be fixed, but given it's been broken for so many years and no one
noticed, we need to give QEMU a bit more time before applying this.

Further, this patch is incomplete (does not check blk size is a power
of two) and it duplicates the logic from nbd.

Revert for now, and we'll reapply a cleaner logic in the next release.

Cc: stable@vger.kernel.org
Fixes: 82e89ea077b9 ("virtio-blk: Add validation for block size in config space")
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost_vdpa: unset vq irq before freeing irq

Currently we unset vq irq after freeing irq and that will result in
error messages:

pi_update_irte: failed to update PI IRTE
irq bypass consumer (token 000000005a07a12b) unregistration fails: -22

This patch solves this.

Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Link: https://lore.kernel.org/r/02637d38dcf4e4b836c5b3a65055fe92bf812b3b.1631687872.git.wuzongyong@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

virtio: write back F_VERSION_1 before validate

The virtio specification virtio-v1.1-cs01 states: "Transitional devices
MUST detect Legacy drivers by detecting that VIRTIO_F_VERSION_1 has not
been acknowledged by the driver."  This is exactly what QEMU as of 6.1
has done relying solely on VIRTIO_F_VERSION_1 for detecting that.

However, the specification also says: "... the driver MAY read (but MUST
NOT write) the device-specific configuration fields to check that it can
support the device ..." before setting FEATURES_OK.

In that case, any transitional device relying solely on
VIRTIO_F_VERSION_1 for detecting legacy drivers will return data in
legacy format.  In particular, this implies that it is in big endian
format for big endian guests. This naturally confuses the driver which
expects little endian in the modern mode.

It is probably a good idea to amend the spec to clarify that
VIRTIO_F_VERSION_1 can only be relied on after the feature negotiation
is complete. Before validate callback existed, config space was only
read after FEATURES_OK. However, we already have two regressions, so
let's address this here as well.

The regressions affect the VIRTIO_NET_F_MTU feature of virtio-net and
the VIRTIO_BLK_F_BLK_SIZE feature of virtio-blk for BE guests when
virtio 1.0 is used on both sides. The latter renders virtio-blk unusable
with DASD backing, because things simply don't work with the default.
See Fixes tags for relevant commits.

For QEMU, we can work around the issue by writing out the feature bits
with VIRTIO_F_VERSION_1 bit set.  We (ab)use the finalize_features
config op for this. This isn't enough to address all vhost devices since
these do not get the features until FEATURES_OK, however it looks like
the affected devices actually never handled the endianness for legacy
mode correctly, so at least that's not a regression.

No devices except virtio net and virtio blk seem to be affected.

Long term the right thing to do is to fix the hypervisors.

Cc: <stable@vger.kernel.org> #v4.11
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 82e89ea077b9 ("virtio-blk: Add validation for block size in config space")
Fixes: fe36cbe0671e ("virtio_net: clear MTU when out of range")
Reported-by: markver@us.ibm.com
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20211011053921.1198936-1-pasic@linux.ibm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

usb: musb: dsps: Fix the probe error path

Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after
initializing musb") has inverted the calls to
dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without
updating correctly the error path. dsps_create_musb_pdev() allocates and
registers a new platform device which must be unregistered and freed
with platform_device_unregister(), and this is missing upon
dsps_setup_optional_vbus_irq() error.

While on the master branch it seems not to trigger any issue, I observed
a kernel crash because of a NULL pointer dereference with a v5.10.70
stable kernel where the patch mentioned above was backported. With this
kernel version, -EPROBE_DEFER is returned the first time
dsps_setup_optional_vbus_irq() is called which triggers the probe to
error out without unregistering the platform device. Unfortunately, on
the Beagle Bone Black Wireless, the platform device still living in the
system is being used by the USB Ethernet gadget driver, which during the
boot phase triggers the crash.

My limited knowledge of the musb world prevents me to revert this commit
which was sent to silence a robot warning which, as far as I understand,
does not make sense. The goal of this patch was to prevent an IRQ to
fire before the platform device being registered. I think this cannot
ever happen due to the fact that enabling the interrupts is done by the
->enable() callback of the platform musb device, and this platform
device must be already registered in order for the core or any other
user to use this callback.

Hence, I decided to fix the error path, which might prevent future
errors on mainline kernels while also fixing older ones.

Fixes: 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20211005221631.1529448-1-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Free the returned object of acpi_evaluate_dsm()

As per the comment on top of acpi_evaluate_dsm():

| * Evaluate device's _DSM method with specified GUID, revision id and
| * function number. Caller needs to free the returned object.

We should free the returned object of acpi_evaluate_dsm() to avoid memory
leakage. Otherwise the kmemleak splat will be triggered at boot time (if we
compile kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE=y).

Fixes: 8e55f99c510f ("drm/i915: Invoke another _DSM to enable MUX on HP Workstation laptops")
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906033541.862-1-yuzenghui@huawei.com
(cherry picked from commit 149ac2e7ae1845191bd18b66a725392ac83a0c47)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Fix bug in user proto-context creation that leaked contexts

Set number of engines before attempting to create contexts so the
function free_engines can clean up properly. Also check return of
alloc_engines for NULL.

v2:
(Tvrtko)
  - Send as stand alone patch
(John Harrison)
  - Check for alloc_engines returning NULL
v3:
(Checkpatch / Tvrtko)
  - Remove braces around single line if statement

Cc: Jason Ekstrand <jason@jlekstrand.net>
Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001155825.6762-1-matthew.brost@intel.com
(cherry picked from commit 84edf53776343d6b5bf5fa59a6f600a22ca23c40)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

mei: hbm: drop hbm responses on early shutdown

Drop HBM responses also in the early shutdown phase where
the usual traffic is allowed.
Extend the rule that drop HBM responses received during the shutdown phase
by also in MEI_DEV_POWERING_DOWN state.
This resolves the stall if the driver is stopping in the middle
of the link init or link reset.

Fixes: da3eb47c90d4 ("mei: hbm: drop hbm responses on shutdown")
Fixes: 36edb1407c3c ("mei: allow clients on bus to communicate in remove callback")
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20211013074552.2278419-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/xive: Discard disabled interrupts in get_irqchip_state()

When an interrupt is passed through, the KVM XIVE device calls the
set_vcpu_affinity() handler which raises the P bit to mask the
interrupt and to catch any in-flight interrupts while routing the
interrupt to the guest.

On the guest side, drivers (like some Intels) can request at probe
time some MSIs and call synchronize_irq() to check that there are no
in flight interrupts. This will call the XIVE get_irqchip_state()
handler which will always return true as the interrupt P bit has been
set on the host side and lock the CPU in an infinite loop.

Fix that by discarding disabled interrupts in get_irqchip_state().

Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: stable@vger.kernel.org #v5.4+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: seeteena <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070203.99726-1-clg@kaod.org

memblock: exclude NOMAP regions from kmemleak

Vladimir Zapolskiy reports:

commit a7259df76702 ("memblock: make memblock_find_in_range method private")
invokes a kernel panic while running kmemleak on OF platforms with nomaped
regions:

  Unable to handle kernel paging request at virtual address fff000021e00000
  [...]
    scan_block+0x64/0x170
    scan_gray_list+0xe8/0x17c
    kmemleak_scan+0x270/0x514
    kmemleak_write+0x34c/0x4ac

Indeed, NOMAP regions don't have linear map entries so an attempt to scan
these areas would fault.

Prevent such faults by excluding NOMAP regions from kmemleak.

Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org
Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

PCI/MSI: Handle msi_populate_sysfs() errors correctly

Previously, when msi_populate_sysfs() failed, we saved the error return
value as dev->msi_irq_groups, which leads to a page fault when
free_msi_irqs() calls msi_destroy_sysfs().

To prevent this, leave dev->msi_irq_groups alone when msi_populate_sysfs()
fails.

Found by the Hulk Robot when injecting a memory allocation fault in
msi_populate_sysfs():

  BUG: unable to handle page fault for address: fffffffffffffff4
  ...
  Call Trace:
   msi_destroy_sysfs+0x30/0xa0
   free_msi_irqs+0x11d/0x1b0

Fixes: 2f170814bdd2 ("genirq/msi: Move MSI sysfs handling from PCI to MSI core")
Link: https://lore.kernel.org/r/20211012071556.939137-1-wanghai38@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Barry Song <song.bao.hua@hisilicon.com>

Merge branch 'felix-dsa-driver-fixes'

Vladimir Oltean says:

====================
Felix DSA driver fixes

This is an assorted collection of fixes for issues seen on the NXP
LS1028A switch.

- PTP packet drops due to switch congestion result in catastrophic
  damage to the driver's state
- loops are not blocked by STP if using the ocelot-8021q tagger
- driver uses the wrong CPU port when two of them are defined in DT
- module autoloading is broken* with both tagging protocol drivers
  (ocelot and ocelot-8021q)

Changes in v2:
- Stop printing that we aren't going to take TX timestamps if we don't
  have TX timestamping anyway, and we are just carrying PTP frames for a
  cascaded DSA switch.
- Shorten the deferred xmit kthread name so that it fits the 16
  character limit (TASK_COMM_LEN)
====================

Link: https://lore.kernel.org/r/20211012114044.2526146-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: felix: break at first CPU port during init and teardown

The NXP LS1028A switch has two Ethernet ports towards the CPU, but only
one of them is capable of acting as an NPI port at a time (inject and
extract packets using DSA tags).

However, using the alternative ocelot-8021q tagging protocol, it should
be possible to use both CPU ports symmetrically, but for that we need to
mark both ports in the device tree as DSA masters.

In the process of doing that, it can be seen that traffic to/from the
network stack gets broken, and this is because the Felix driver iterates
through all DSA CPU ports and configures them as NPI ports. But since
there can only be a single NPI port, we effectively end up in a
situation where DSA thinks the default CPU port is the first one, but
the hardware port configured to be an NPI is the last one.

I would like to treat this as a bug, because if the updated device trees
are going to start circulating, it would be really good for existing
kernels to support them, too.

Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports

When setting up a bridge with stp_state 1, topology changes are not
detected and loops are not blocked. This is because the standard way of
transmitting a packet, based on VLAN IDs redirected by VCAP IS2 to the
right egress port, does not override the port STP state (in the case of
Ocelot switches, that's really the PGID_SRC masks).

To force a packet to be injected into a port that's BLOCKING, we must
send it as a control packet, which means in the case of this tagger to
send it using the manual register injection method. We already do this
for PTP frames, extend the logic to apply to any link-local MAC DA.

Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent

At present, when a PTP packet which requires TX timestamping gets
dropped under congestion by the switch, things go downhill very fast.
The driver keeps a clone of that skb in a queue of packets awaiting TX
timestamp interrupts, but interrupts will never be raised for the
dropped packets.

Moreover, matching timestamped packets to timestamps is done by a 2-bit
timestamp ID, and this can wrap around and we can match on the wrong skb.

Since with the default NPI-based tagging protocol, we get no notification
about packet drops, the best we can do is eventually recover from the
drop of a PTP frame: its skb will be dead memory until another skb which
was assigned the same timestamp ID happens to find it.

However, with the ocelot-8021q tagger which injects packets using the
manual register interface, it appears that we can check for more
information, such as:

- whether the input queue has reached the high watermark or not
- whether the injection group's FIFO can accept additional data or not

so we know that a PTP frame is likely to get dropped before actually
sending it, and drop it ourselves (because DSA uses NETIF_F_LLTX, so it
can't return NETDEV_TX_BUSY to ask the qdisc to requeue the packet).

But when we do that, we can also remove the skb from the timestamping
queue, because there surely won't be any timestamp that matches it.

Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib

Michael reported that when using the "ocelot-8021q" tagging protocol,
the switch driver module must be manually loaded before the tagging
protocol can be loaded/is available.

This appears to be the same problem described here:
https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
where due to the fact that DSA tagging protocols make use of symbols
exported by the switch drivers, circular dependencies appear and this
breaks module autoloading.

The ocelot_8021q driver needs the ocelot_can_inject() and
ocelot_port_inject_frame() functions from the switch library. Previously
the wrong approach was taken to solve that dependency: shims were
provided for the case where the ocelot switch library was compiled out,
but that turns out to be insufficient, because the dependency when the
switch lib _is_ compiled is problematic too.

We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as
static inline functions, because these access I/O functions like
__ocelot_write_ix() which is called by ocelot_write_rix(). Making those
static inline basically means exposing the whole guts of the ocelot
switch library, not ideal...

We already have one tagging protocol driver which calls into the switch
driver during xmit but not using any exported symbol: sja1105_defer_xmit.
We can do the same thing here: create a kthread worker and one work item
per skb, and let the switch driver itself do the register accesses to
send the skb, and then consume it.

Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver

As explained here:
https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
DSA tagging protocol drivers cannot depend on symbols exported by switch
drivers, because this creates a circular dependency that breaks module
autoloading.

The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function
exported by the common ocelot switch lib. This function looks at
OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the
DSA tag, for PTP timestamping (the command: one-step/two-step, and the
TX timestamp identifier).

None of that requires deep insight into the driver, it is quite
stateless, as it only depends upon the skb->cb. So let's make it a
static inline function and put it in include/linux/dsa/ocelot.h, a
file that despite its name is used by the ocelot switch driver for
populating the injection header too - since commit 40d3f295b5fe ("net:
mscc: ocelot: use common tag parsing code with DSA").

With that function declared as static inline, its body is expanded
inside each call site, so the dependency is broken and the DSA tagger
can be built without the switch library, upon which the felix driver
depends.

Fixes: 39e5308b3250 ("net: mscc: ocelot: support PTP Sync one-step timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header

The sad reality is that when a PTP frame with a TX timestamping request
is transmitted, it isn't guaranteed that it will make it all the way to
the wire (due to congestion inside the switch), and that a timestamp
will be taken by the hardware and placed in the timestamp FIFO where an
IRQ will be raised for it.

The implication is that if enough PTP frames are silently dropped by the
hardware such that the timestamp ID has rolled over, it is possible to
match a timestamp to an old skb.

Furthermore, nobody will match on the real skb corresponding to this
timestamp, since we stupidly matched on a previous one that was stale in
the queue, and stopped there.

So PTP timestamping will be broken and there will be no way to recover.

It looks like the hardware parses the sequenceID from the PTP header,
and also provides that metadata for each timestamp. The driver currently
ignores this, but it shouldn't.

As an extra resiliency measure, do the following:

- check whether the PTP sequenceID also matches between the skb and the
  timestamp, treat the skb as stale otherwise and free it

- if we see a stale skb, don't stop there and try to match an skb one
  more time, chances are there's one more skb in the queue with the same
  timestamp ID, otherwise we wouldn't have ever found the stale one (it
  is by timestamp ID that we matched it).

While this does not prevent PTP packet drops, it at least prevents
the catastrophic consequences of incorrect timestamp matching.

Since we already call ptp_classify_raw in the TX path, save the result
in the skb->cb of the clone, and just use that result in the interrupt
code path.

Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: deny TX timestamping of non-PTP packets

It appears that Ocelot switches cannot timestamp non-PTP frames,
I tested this using the isochron program at:
https://github.com/vladimiroltean/tsn-scripts

with the result that the driver increments the ocelot_port->ts_id
counter as expected, puts it in the REW_OP, but the hardware seems to
not timestamp these packets at all, since no IRQ is emitted.

Therefore check whether we are sending PTP frames, and refuse to
populate REW_OP otherwise.

Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb

When skb_match is NULL, it means we received a PTP IRQ for a timestamp
ID that the kernel has no idea about, since there is no skb in the
timestamping queue with that timestamp ID.

This is a grave error and not something to just "continue" over.
So print a big warning in case this happens.

Also, move the check above ocelot_get_hwtimestamp(), there is no point
in reading the full 64-bit current PTP time if we're not going to do
anything with it anyway for this skb.

Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO

PTP packets with 2-step TX timestamp requests are matched to packets
based on the egress port number and a 6-bit timestamp identifier.
All PTP timestamps are held in a common FIFO that is 128 entry deep.

This patch ensures that back-to-back timestamping requests cannot exceed
the hardware FIFO capacity. If that happens, simply send the packets
without requesting a TX timestamp to be taken (in the case of felix,
since the DSA API has a void return code in ds->ops->port_txtstamp) or
drop them (in the case of ocelot).

I've moved the ts_id_lock from a per-port basis to a per-switch basis,
because we need separate accounting for both numbers of PTP frames in
flight. And since we need locking to inc/dec the per-switch counter,
that also offers protection for the per-port counter and hence there is
no reason to have a per-port counter anymore.

Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: make use of all 63 PTP timestamp identifiers

At present, there is a problem when user space bombards a port with PTP
event frames which have TX timestamping requests (or when a tc-taprio
offload is installed on a port, which delays the TX timestamps by a
significant amount of time). The driver will happily roll over the 2-bit
timestamp ID and this will cause incorrect matches between an skb and
the TX timestamp collected from the FIFO.

The Ocelot switches have a 6-bit PTP timestamp identifier, and the value
63 is reserved, so that leaves identifiers 0-62 to be used.

The timestamp identifiers are selected by the REW_OP packet field, and
are actually shared between CPU-injected frames and frames which match a
VCAP IS2 rule that modifies the REW_OP. The hardware supports
partitioning between the two uses of the REW_OP field through the
PTP_ID_LOW and PTP_ID_HIGH registers, and by default reserves the PTP
IDs 0-3 for CPU-injected traffic and the rest for VCAP IS2.

The driver does not use VCAP IS2 to set REW_OP for 2-step timestamping,
and it also writes 0xffffffff to both PTP_ID_HIGH and PTP_ID_LOW in
ocelot_init_timestamp() which makes all timestamp identifiers available
to CPU injection.

Therefore, we can make use of all 63 timestamp identifiers, which should
allow more timestampable packets to be in flight on each port. This is
only part of the solution, more issues will be addressed in future changes.

Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fix-circular-dependency-between-sja1105-and-tag_sja1105'

Vladimir Oltean says:

====================
Fix circular dependency between sja1105 and tag_sja1105

As discussed here:
https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
DSA tagging protocols cannot use symbols exported by switch drivers.

Eliminate the two instances of that from tag_sja1105, and that allows us
to have a working setup with modules again.
====================

Re-applying to net, this was mistakenly applied to net-next,
see first Link.

Link: https://lore.kernel.org/r/20211012114044.2526146-1-vladimir.oltean@nxp.com/
Link: https://lore.kernel.org/r/20210922143726.2431036-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: sja1105: break dependency between dsa_port_is_sja1105 and switch driver

It's nice to be able to test a tagging protocol with dsa_loop, but not
at the cost of losing the ability of building the tagging protocol and
switch driver as modules, because as things stand, there is a circular
dependency between the two. Tagging protocol drivers cannot depend on
switch drivers, that is a hard fact.

The reasoning behind the blamed patch was that accessing dp->priv should
first make sure that the structure behind that pointer is what we really
think it is.

Currently the "sja1105" and "sja1110" tagging protocols only operate
with the sja1105 switch driver, just like any other tagging protocol and
switch combination. The only way to mix and match them is by modifying
the code, and this applies to dsa_loop as well (by default that uses
DSA_TAG_PROTO_NONE). So while in principle there is an issue, in
practice there isn't one.

Until we extend dsa_loop to allow user space configuration, treat the
problem as a non-issue and just say that DSA ports found by tag_sja1105
are always sja1105 ports, which is in fact true. But keep the
dsa_port_is_sja1105 function so that it's easy to patch it during
testing, and rely on dead code elimination.

Fixes: 994d2cbb08ca ("net: dsa: tag_sja1105: be dsa_loop-safe")
Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: move sja1110_process_meta_tstamp inside the tagging protocol driver

The problem is that DSA tagging protocols really must not depend on the
switch driver, because this creates a circular dependency at insmod
time, and the switch driver will effectively not load when the tagging
protocol driver is missing.

The code was structured in the way it was for a reason, though. The DSA
driver-facing API for PTP timestamping relies on the assumption that
two-step TX timestamps are provided by the hardware in an out-of-band
manner, typically by raising an interrupt and making that timestamp
available inside some sort of FIFO which is to be accessed over
SPI/MDIO/etc.

So the API puts .port_txtstamp into dsa_switch_ops, because it is
expected that the switch driver needs to save some state (like put the
skb into a queue until its TX timestamp arrives).

On SJA1110, TX timestamps are provided by the switch as Ethernet
packets, so this makes them be received and processed by the tagging
protocol driver. This in itself is great, because the timestamps are
full 64-bit and do not require reconstruction, and since Ethernet is the
fastest I/O method available to/from the switch, PTP timestamps arrive
very quickly, no matter how bottlenecked the SPI connection is, because
SPI interaction is not needed at all.

DSA's code structure and strict isolation between the tagging protocol
driver and the switch driver break the natural code organization.

When the tagging protocol driver receives a packet which is classified
as a metadata packet containing timestamps, it passes those timestamps
one by one to the switch driver, which then proceeds to compare them
based on the recorded timestamp ID that was generated in .port_txtstamp.

The communication between the tagging protocol and the switch driver is
done through a method exported by the switch driver, sja1110_process_meta_tstamp.
To satisfy build requirements, we force a dependency to build the
tagging protocol driver as a module when the switch driver is a module.
However, as explained in the first paragraph, that causes the circular
dependency.

To solve this, move the skb queue from struct sja1105_private :: struct
sja1105_ptp_data to struct sja1105_private :: struct sja1105_tagger_data.
The latter is a data structure for which hacks have already been put
into place to be able to create persistent storage per switch that is
accessible from the tagging protocol driver (see sja1105_setup_ports).

With the skb queue directly accessible from the tagging protocol driver,
we can now move sja1110_process_meta_tstamp into the tagging driver
itself, and avoid exporting a symbol.

Fixes: 566b18c8b752 ("net: dsa: sja1105: implement TX timestamping for SJA1110")
Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: fix spurious error message when unoffloaded port leaves bridge

Flip the sign of a return value check, thereby suppressing the following
spurious error:

port 2 failed to notify DSA_NOTIFIER_BRIDGE_LEAVE: -EOPNOTSUPP

... which is emitted when removing an unoffloaded DSA switch port from a
bridge.

Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211012112730.3429157-1-alvin@pqrs.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfp: flow_offload: move flow_indr_dev_register from app init to app start

In commit 74fc4f828769 ("net: Fix offloading indirect devices dependency
on qdisc order creation"), it adds a process to trigger the callback to
setup the bo callback when the driver regists a callback.

In our current implement, we are not ready to run the callback when nfp
call the function flow_indr_dev_register, then there will be error
message as:

kernel: Oops: 0000 [#1] SMP PTI
kernel: CPU: 0 PID: 14119 Comm: kworker/0:0 Tainted: G
kernel: Workqueue: events work_for_cpu_fn
kernel: RIP: 0010:nfp_flower_indr_setup_tc_cb+0x258/0x410
kernel: RSP: 0018:ffffbc1e02c57bf8 EFLAGS: 00010286
kernel: RAX: 0000000000000000 RBX: ffff9c761fabc000 RCX: 0000000000000001
kernel: RDX: 0000000000000001 RSI: fffffffffffffff0 RDI: ffffffffc0be9ef1
kernel: RBP: ffffbc1e02c57c58 R08: ffffffffc08f33aa R09: ffff9c6db7478800
kernel: R10: 0000009c003f6e00 R11: ffffbc1e02800000 R12: ffffbc1e000d9000
kernel: R13: ffffbc1e000db428 R14: ffff9c6db7478800 R15: ffff9c761e884e80
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: fffffffffffffff0 CR3: 00000009e260a004 CR4: 00000000007706f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: PKRU: 55555554
kernel: Call Trace:
kernel: ? flow_indr_dev_register+0xab/0x210
kernel: ? __cond_resched+0x15/0x30
kernel: ? kmem_cache_alloc_trace+0x44/0x4b0
kernel: ? nfp_flower_setup_tc+0x1d0/0x1d0 [nfp]
kernel: flow_indr_dev_register+0x158/0x210
kernel: ? tcf_block_unbind+0xe0/0xe0
kernel: nfp_flower_init+0x40b/0x650 [nfp]
kernel: nfp_net_pci_probe+0x25f/0x960 [nfp]
kernel: ? nfp_rtsym_read_le+0x76/0x130 [nfp]
kernel: nfp_pci_probe+0x6a9/0x820 [nfp]
kernel: local_pci_probe+0x45/0x80

So we need to call flow_indr_dev_register in app start process instead of
init stage.

Fixes: 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation")
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20211012124850.13025-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm: rcar-du: Don't create encoder for unconnected LVDS outputs

On R-Car D3 and E3, the LVDS encoders provide the pixel clock to the DU,
even when LVDS outputs are not used. For this reason, the rcar-lvds
driver probes successfully on those platforms even if no further bridge
or panel is connected to the LVDS output, in order to provide the
rcar_lvds_clk_enable() and rcar_lvds_clk_disable() functions to the DU
driver.

If an LVDS output isn't connected, trying to create a DRM connector for
the output will fail. Fix this by skipping connector creation in that
case, and also skip creation of the DRM encoder as there's no point in
an encoder without a connector.

Fixes: e9e056949c92 ("drm: rcar-du: lvds: Convert to DRM panel bridge helper")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
(cherry picked from commit 187502afe87a0fc96832056558978fa423920ee0)
Signed-off-by: Dave Airlie <airlied@redhat.com>

net/mlx5e: Fix division by 0 in mlx5e_select_queue for representors

Commit 846d6da1fcdb ("net/mlx5e: Fix division by 0 in
mlx5e_select_queue") makes mlx5e_build_nic_params assign a non-zero
initial value to priv->num_tc_x_num_ch, so that mlx5e_select_queue
doesn't fail with division by 0 if called before the first activation of
channels. However, the initialization flow of representors doesn't call
mlx5e_build_nic_params, so this bug can still happen with representors.

This commit fixes the bug by adding the missing assignment to
mlx5e_build_rep_params.

Fixes: 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp

Due to current HW arch limitations, RX-FCS (scattering FCS frame field
to software) and RX-port-timestamp (improved timestamp accuracy on the
receive side) can't work together.
RX-port-timestamp is not controlled by the user and it is enabled by
default when supported by the HW/FW.
This patch sets RX-port-timestamp opposite to RX-FCS configuration.

Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Switchdev representors are not vlan challenged

Before this patch, mlx5 representors advertised the
NETIF_F_VLAN_CHALLENGED bit, this could lead to missing features when
using reps with vxlan/bridge and maybe other virtual interfaces,
when such interfaces inherit this bit and block vlan usage in their
topology.

Example:
$ip link add dev bridge type bridge
# add representor interface to the bridge
$ip link set dev pf0hpf master
$ip link add link bridge name vlan10 type vlan id 10 protocol 802.1q
Error: 8021q: VLANs not supported on device.

Reps are perfectly capable of handling vlan traffic, although they don't
implement vlan_{add,kill}_vid ndos, hence, remove
NETIF_F_VLAN_CHALLENGED advertisement.

Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors")
Reported-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>

net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path

Prior to this patch in case mlx5_core_destroy_cq() failed it returns
without completing all destroy operations and that leads to memory leak.
Instead, complete the destroy flow before return error.

Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq()
to be symmetrical with mlx5_core_create_cq().

kmemleak complains on:

unreferenced object 0xc000000038625100 (size 64):
  comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s)
  hex dump (first 32 bytes):
    60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0  `.H.......4.....
    02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0  ..........}.....
  backtrace:
    [<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core]
    [<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core]
    [<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core]
    [<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core]
    [<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core]
    [<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core]
    [<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core]
    [<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230
[mlx5_core]
    [<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300
[mlx5_core]
    [<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core]
    [<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core]
    [<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0
    [<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0
    [<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0
    [<00000000646c5c2c>] genl_rcv_msg+0x78/0x120
    [<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Valentine Fatiev <valentinef@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Allow only complete TXQs partition in MQPRIO channel mode

Do not allow configurations of MQPRIO channel mode that do not
fully define and utilize the channels txqs.

Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Fix cleanup of bridge delayed work

Currently, bridge cleanup is calling to cancel_delayed_work(). When this
function is finished, there is a chance that the delayed work is still
running. Also, the delayed work is queueing itself.
As a result, we might execute the delayed work after the bridge cleanup
have finished and hit a null-ptr oops[1].

Fix it by using cancel_delayed_work_sync(), which is waiting until the
work is done and will cancel the queue work.

[1]
[ 8202.143043 ] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 8202.144438 ] #PF: supervisor write access in kernel mode
[ 8202.145476 ] #PF: error_code(0x0002) - not-present page
[ 8202.146520 ] PGD 0 P4D 0
[ 8202.147126 ] Oops: 0002 [#1] SMP NOPTI
[ 8202.147899 ] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.14.0-rc6_for_upstream_min_debug_2021_08_25_16_06 #1
[ 8202.149741 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 8202.151908 ] RIP: 0010:_raw_spin_lock+0xc/0x20
[ 8202.156234 ] RSP: 0018:ffff88846f885ea0 EFLAGS: 00010046
[ 8202.157289 ] RAX: 0000000000000000 RBX: ffff88846f880000 RCX: 0000000000000000
[ 8202.158731 ] RDX: 0000000000000001 RSI: ffff8881004000c8 RDI: 0000000000000000
[ 8202.160177 ] RBP: ffff8881fe684978 R08: ffff888100140000 R09: ffffffff824455b8
[ 8202.161569 ] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[ 8202.163004 ] R13: 0000000000000012 R14: 0000000000000200 R15: ffff88812992d000
[ 8202.164018 ] FS:  0000000000000000(0000) GS:ffff88846f880000(0000) knlGS:0000000000000000
[ 8202.164960 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8202.165634 ] CR2: 0000000000000000 CR3: 0000000108cac004 CR4: 0000000000370ea0
[ 8202.166450 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8202.167807 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8202.168852 ] Call Trace:
[ 8202.169421 ]  <IRQ>
[ 8202.169792 ]  __queue_work+0xf2/0x3d0
[ 8202.170481 ]  ? queue_work_node+0x40/0x40
[ 8202.171270 ]  call_timer_fn+0x2b/0x100
[ 8202.171932 ]  __run_timers.part.0+0x152/0x220
[ 8202.172717 ]  ? __hrtimer_run_queues+0x171/0x290
[ 8202.173526 ]  ? kvm_clock_get_cycles+0xd/0x10
[ 8202.174232 ]  ? ktime_get+0x35/0x90
[ 8202.174943 ]  run_timer_softirq+0x26/0x50
[ 8202.175745 ]  __do_softirq+0xc7/0x271
[ 8202.176373 ]  irq_exit_rcu+0x93/0xb0
[ 8202.176983 ]  sysvec_apic_timer_interrupt+0x72/0x90
[ 8202.177755 ]  </IRQ>
[ 8202.178245 ]  asm_sysvec_apic_timer_interrupt+0x12/0x20

Fixes: c636a0f0f3f0 ("net/mlx5: Bridge, dynamic entry ageing")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

ALSA: usb-audio: Add quirk for VF0770

The device advertises 8 formats, but only a rate of 48kHz is honored
by the hardware and 24 bits give chopped audio, so only report the
one working combination. This fixes out-of-the-box audio experience
with PipeWire which otherwise attempts to choose S24_3LE (while
PulseAudio defaulted to S16_LE).

Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211012200906.3492-1-hahnjo@hahnjo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Fix CMA gigantic page order for 16K/64K page sizes

- Fix section mismatch error in drivers/acpi/arm64/gtdt.c

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
acpi/arm64: fix next_platform_timer() section mismatch error
arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZE