Chris Morgan [Sun, 22 Mar 2015 00:47:46 +0000 (20:47 -0400)]
man: add journal-remote.conf(5)
Zbigniew Jędrzejewski-Szmek [Sat, 21 Mar 2015 23:21:17 +0000 (19:21 -0400)]
timedated: fix enable/disable reversal
Bug introduced in
984f1b1d1b. The state was flipped later,
but the enable/disable routine made use of the state to decide
what to do.
context_enable_ntp() and context_start_ntp() now get the desired
state directly, so the Context parameter can be removed.
Zbigniew Jędrzejewski-Szmek [Sat, 21 Mar 2015 22:50:10 +0000 (18:50 -0400)]
core: make SELinux enable/disable check symmetric
We'd use the generic check for disable, and a unit-file-specific one for enable.
Use the more specific one both ways.
systemd[1]: SELinux access check scon=system_u:system_r:systemd_timedated_t:s0 tcon=system_u:system_r:init_t:s0 tclass=system perm=disable path=(null) cmdline=/usr/lib/systemd/systemd-timedated: -13
systemd[1]: SELinux access check scon=system_u:system_r:systemd_timedated_t:s0 tcon=system_u:object_r:systemd_unit_file_t:s0 tclass=service perm=enable path=/usr/lib/systemd/system/systemd-timesyncd.service cmdline=/usr/lib/systemd/systemd-timedated: -13
https://bugzilla.redhat.com/show_bug.cgi?id=1014315
Zbigniew Jędrzejewski-Szmek [Sat, 21 Mar 2015 21:40:20 +0000 (17:40 -0400)]
timedated: flip internal status after executing operation
timedated would set the internal status before calling out to systemd to do
the actual change. When the operation was refused because of a SELinux denial,
the state kept in timedated would get out of sync, and the second call from
timedatectl would appear to succeed.
https://bugzilla.redhat.com/show_bug.cgi?id=1014315
Michael Olbrich [Wed, 18 Mar 2015 13:04:55 +0000 (14:04 +0100)]
missing.h: add more btrfs types and defines
Zbigniew Jędrzejewski-Szmek [Sat, 21 Mar 2015 15:31:16 +0000 (11:31 -0400)]
fstab-generator: ignore invalid swap priority
A failed priority is not something worth stopping boot over. Most people
have only one swap device, in which case priority is irrelevant, and even
if there is more than one swap device, they are all usable, and ignoring the
priority field should only result in some loss of performance.
The kernel will report the priority as -1 if not set, so it's easy for
people to make this mistake.
https://bugzilla.redhat.com/show_bug.cgi?id=1204336
Zbigniew Jędrzejewski-Szmek [Mon, 16 Mar 2015 15:35:12 +0000 (11:35 -0400)]
networkd: use LOG_WARN not LOG_ERR for non-fatal errors
Zbigniew Jędrzejewski-Szmek [Mon, 16 Mar 2015 15:34:39 +0000 (11:34 -0400)]
shared/mkdir: do not set errno in addition to return value
All callers look at the return value anyway.
David Herrmann [Fri, 20 Mar 2015 11:28:12 +0000 (12:28 +0100)]
rules: avoid 'device/' accesses
We should never access parents, as the sysfs hierarchy is in no way
stable. Use KERNELS== etc. to match on a parent, then access it via
$attr{} (which accesses the matching device, not the current device).
David Herrmann [Fri, 20 Mar 2015 09:44:21 +0000 (10:44 +0100)]
rules: fix input-name for keyboard rules
We match on the evdev node, but only the parent has a "name" attribute.
Use $attr{device/name} to access it.
This is borked since 2013, I wonder how that ever worked? Maybe this will
suddenly fix all the DMI-based key detections.
Thanks to Peter Hutterer for catching this!
Goffredo Baroncelli [Mon, 16 Mar 2015 19:33:51 +0000 (20:33 +0100)]
man: add h/H to tmpfiles.d(5)
Goffredo Baroncelli [Mon, 16 Mar 2015 19:33:50 +0000 (20:33 +0100)]
Allow systemd-tmpfiles to set the file/directory attributes
Allow systemd-tmpfiles to set the file/directory attributes, like
chattr(1) does. Two more commands are added: 'H' and 'h' to set the
attributes, recursively and not.
Goffredo Baroncelli [Mon, 16 Mar 2015 19:33:49 +0000 (20:33 +0100)]
Add change_attr_fd()
Add change_attr_fd() function to modify the file/directory attribute.
Sebastian Rasmussen [Fri, 20 Mar 2015 01:55:25 +0000 (21:55 -0400)]
po: updated Swedish translation
https://bugs.freedesktop.org/show_bug.cgi?id=89598
Dimitri John Ledkov [Mon, 16 Mar 2015 22:54:07 +0000 (22:54 +0000)]
hwdb: ship ids-update.pl & sdio.ids in the release tarballs
This makes it easier to apply stable branch patches on top of the
release tarball.
Zbigniew Jędrzejewski-Szmek [Thu, 19 Mar 2015 23:48:57 +0000 (19:48 -0400)]
hwdb: add HP ProBook 450G0
https://bugs.freedesktop.org/show_bug.cgi?id=89684
Thomas Hindoe Paaboel Andersen [Wed, 18 Mar 2015 21:36:16 +0000 (22:36 +0100)]
fsck: use %zu for size_t
cur and max were changed to size_t in
ac6e2f0dfc2e800f01c79ecea2b811914110a7b9
update the format accordingly.
Dimitri John Ledkov [Tue, 17 Mar 2015 15:37:07 +0000 (16:37 +0100)]
resolved: Do not add .busname dependencies, when compiling without kdbus.
David Herrmann [Tue, 17 Mar 2015 11:20:31 +0000 (12:20 +0100)]
strv: return NULL from strv_free()
We always return NULL/invalid-object from destructors, fix strv_free() to
do the same.
David Herrmann [Mon, 16 Mar 2015 20:07:38 +0000 (21:07 +0100)]
bootctl: drop redundant parse_argv()
We already call parse_argv() from main(), don't call it here again.
Tom Gundersen [Sun, 15 Mar 2015 16:10:17 +0000 (17:10 +0100)]
libudev: private - introduce udev_device_new_from_synthetic_event()
This allows set_action(), read_uevent_file() and read_db() to be made internal to libudev.
Jan Pazdziora [Fri, 13 Mar 2015 11:57:18 +0000 (12:57 +0100)]
console-getty.service: don't start when /dev/console is missing
Create minimal image which runs systemd
FROM rhel7.1
RUN yum install -y /usr/bin/ps
ENV container docker
CMD [ "/usr/sbin/init" ]
When you run the container without -t, the process
/sbin/agetty --noclear --keep-baud console 115200 38400 9600
is not happy and checking the journal in the container, there is a stream of
Mar 13 04:50:15
11bf07f59fff agetty[66]: /dev/console: No such file or directory
Mar 13 04:50:25
11bf07f59fff systemd[1]: console-getty.service holdoff time over, scheduling restart.
Mar 13 04:50:25
11bf07f59fff systemd[1]: Stopping Console Getty...
Mar 13 04:50:25
11bf07f59fff systemd[1]: Starting Console Getty...
Mar 13 04:50:25
11bf07f59fff systemd[1]: Started Console Getty.
Mar 13 04:50:25
11bf07f59fff agetty[67]: /dev/console: No such file or directory
Mar 13 04:50:35
11bf07f59fff systemd[1]: console-getty.service holdoff time over, scheduling restart.
Mar 13 04:50:35
11bf07f59fff systemd[1]: Stopping Console Getty...
Mar 13 04:50:35
11bf07f59fff systemd[1]: Starting Console Getty...
Mar 13 04:50:35
11bf07f59fff systemd[1]: Started Console Getty.
Mar 13 04:50:35
11bf07f59fff agetty[74]: /dev/console: No such file or directory
Mar 13 04:50:45
11bf07f59fff systemd[1]: console-getty.service holdoff time over, scheduling restart.
Mar 13 04:50:45
11bf07f59fff systemd[1]: Stopping Console Getty...
Mar 13 04:50:45
11bf07f59fff systemd[1]: Starting Console Getty...
Michal Schmidt [Mon, 16 Mar 2015 21:04:21 +0000 (22:04 +0100)]
core/namespace: fix path sorting
The comparison function we use for qsorting paths is overly indifferent.
Consider these 3 paths for sorting:
/foo
/bar
/foo/foo
qsort() may compare:
"/foo" with "/bar" => 0, indifference
"/bar" with "/foo/foo" => 0, indifference
and assume transitively that "/foo" and "/foo/foo" are also indifferent.
But this is wrong, we want "/foo" sorted before "/foo/foo".
The comparison function must be transitive.
Use path_compare(), which behaves properly.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1184016
Michal Schmidt [Mon, 16 Mar 2015 20:58:35 +0000 (21:58 +0100)]
shared: add path_compare(), an ordering path comparison
... and make path_equal() a simple wrapper around it.
Kay Sievers [Mon, 16 Mar 2015 17:43:14 +0000 (18:43 +0100)]
rules: keyboard - prefix "atkbd" match strings like we prefix the "name" strings
Kay Sievers [Mon, 16 Mar 2015 17:33:45 +0000 (18:33 +0100)]
rules: keyboard - only search the "input" subsystem for the modalias
Didier Roche [Tue, 10 Mar 2015 09:05:19 +0000 (10:05 +0100)]
fsckd: check if plymouth is running before attempting connection
Didier Roche [Tue, 10 Mar 2015 07:58:23 +0000 (08:58 +0100)]
fsckd: Don't use strjoina on gettext() call
Tom Gundersen [Mon, 16 Mar 2015 17:29:26 +0000 (18:29 +0100)]
shared - reinstate plymouth_running()
This will be used by fsckd. This reverts part of
031886edfc6e96ab778c241035a8d00fb0de99d3.
Jasper St. Pierre [Mon, 16 Mar 2015 16:34:59 +0000 (09:34 -0700)]
core: Remove explicit Plymouth integration
Even if plymouth is running, it might have not displayed the splash yet,
so we'll see a few lines on fbcon when we should have otherwise had
nothing.
Plymouth integration was added to systemd in commit
6faa11140bf776cdaeb8d22d01816e6e48296971. That same day, Plymouth got
systemd integration [0]. As such, the Plymouth integration has always
been obsolete, and was probably only for older Plymouth's. But I can't
imagine anybody running a Plymouth from 2011 with a systemd from 2015.
Remove the Plymouth/systemd integration, and let Plymouth's code tell
systemd to print the details.
[0] http://cgit.freedesktop.org/plymouth/commit/?id=
537c16422cd49f1beeaab1ad39846a00018faec1
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Cc: Daniel Drake <dsd@endlessm.com>
Cc: Ray Strode <rstrode@redhat.com>
David Herrmann [Mon, 16 Mar 2015 14:51:25 +0000 (15:51 +0100)]
Revert "hwdb: merge atkbd into platform matches"
This reverts commit
ba76ee29bc02879fb42c048132af8889b00220d5. As it turns
out, we need to match on driver=atkbd to not load the fixups on any
plugged USB devices.
That is, whenever you use "name:<name>:dmi:<dmi>" style matches, you
better provide a name or you're screwing things up.
Martin Pitt [Fri, 13 Mar 2015 07:35:59 +0000 (08:35 +0100)]
core: don't change removed devices to state "tentative"
Commit 628c89c introduced the "tentative" device state, which caused
devices to go from "plugged" to "tentative" on a remove uevent. This
breaks the cleanup of stale mounts (see commit 3b48ce4), as that only
applies to "dead" devices.
The "tentative" state only really makes sense on adding a device when
we don't know where it was coming from (i. e. not from udev). But when
we get a device removal from udev we definitively know that it's gone,
so change the device state back to "dead" as before 628c89c.
Kay Sievers [Mon, 16 Mar 2015 12:43:50 +0000 (13:43 +0100)]
rules: keyboard - remove "platform" from comments
David Herrmann [Mon, 16 Mar 2015 11:19:09 +0000 (12:19 +0100)]
hwdb: merge atkbd into platform matches
Currently, we always run
hwdb 'keyboard:name:$attr{name}:$attr{[dmi/id]modalias}'
as last step to match keyboards. Therefore, if nothing else matched so
far, we still try the device-name+dmi combination.
However, we have a special atkbd rule which is only run for atkbd as:
hwdb 'keyboard:$attr{[dmi/id]modalias}'
This is redundant, as we already pass the same information to hwdb in the
last fallback step.
This patch converts the hwdb "keyboard:dmi:*" matches to
"keyboard:name:*:dmi:*" matches and drops the redundant rule.
David Herrmann [Mon, 16 Mar 2015 11:05:36 +0000 (12:05 +0100)]
rules: drop redundant match
The 60-keyboard rules are already guared by KERNEL!="event*" bail-outs,
therefore, KERNELS="input*" is always true. Drop it!
David Herrmann [Mon, 16 Mar 2015 11:04:38 +0000 (12:04 +0100)]
hwdb: support bluetooth keyboard fixups
Drop the restriction not to match on bluetooth devices. They are supported
just fine!
David Herrmann [Mon, 16 Mar 2015 11:00:46 +0000 (12:00 +0100)]
hwdb: convert to generic input-modalias matches
There is no reason to match on usb-modaliases, if we can use the
input-modalias to achieve the same. This commit changes the
keyboard-lookups to not be restricted to USB, but pass all modaliases to
the hwdb. Furthermore, we convert all usb:* matches to input:* matches,
thus getting rid of any ambiguity if multiple usb devices are chained (or
a bluetooth device / etc. is on top).
Note that legacy keyboard:usb:* matches are still supported, but
deprecated. If possible, please use keyboard:input:* matches instead.
This is a required step to make other input devices work with
60-keyboard.hwdb. Other bus-types are often chained on usb and we want to
avoid any ambiguity here if we incorrectly match on a USB hub.
Piotr Drąg [Sun, 15 Mar 2015 22:01:19 +0000 (23:01 +0100)]
po: update Polish translation
https://bugs.freedesktop.org/show_bug.cgi?id=89582
Alison Chaiken [Sun, 15 Mar 2015 23:26:14 +0000 (16:26 -0700)]
man: standard-conf: change directory reference to wildcard
Lucas De Marchi [Fri, 13 Mar 2015 17:47:28 +0000 (17:47 +0000)]
vconsole-setup: check error of child process
If we don't check the error of the child process, systemd-vconsole-setup
would exit with 0 even if it could not really setup the console.
For a simple test, move loadkeys elsewhere and execute
systemd-vconsole-setup:
[root@localhost ~]# strace -f -e execve /usr/lib/systemd/systemd-vconsole-setup
execve("/usr/lib/systemd/systemd-vconsole-setup", ["/usr/lib/systemd/systemd-vconsol"...], [/* 15 vars */]) = 0
Process 171 attached
[pid 171] execve("/usr/bin/loadkeys", ["/usr/bin/loadkeys", "-q", "-C", "/dev/tty0", "br-abnt2"], [/* 15 vars */]) = -1 ENOENT (No such file or directory)
[pid 171] +++ exited with 1 +++
--- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=171, si_uid=0, si_status=1, si_utime=0, si_stime=0} ---
+++ exited with 0 +++
Note that loadkeys returned 1 while systemd-vconsole-setup return 0.
Since the font and keyboard setup are already serialized, refactor the
code a little bit so the functions do the wait by themselves. One change
in behavior in this patch is that we don't return early, but we do try
to setup the keyboard even if the font load failed.
Michael Marineau [Fri, 13 Mar 2015 19:01:29 +0000 (12:01 -0700)]
network: add UseNTP DHCP option
Despite having the internal logic in place to enable/disable using NTP
servers provided by DHCP the network config didn't expose the option.
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 21:17:24 +0000 (17:17 -0400)]
Add (void) where we don't care about return value
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 21:13:43 +0000 (17:13 -0400)]
journal-gatewayd: factor out opening of temp file
Also use our own mkostemp wrapper, which tries to use O_TMPFILE.
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 20:37:39 +0000 (16:37 -0400)]
logind: check return value of session_release
It allocates memory, so it can fail.
CID #1237527.
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 19:59:23 +0000 (15:59 -0400)]
util: check asprintf return value
CID #1237546.
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 16:12:19 +0000 (12:12 -0400)]
core: remove useless debug message
Mar 13 19:48:28 adam.happyassassin.net systemd[1]: Collecting (null)
Mar 13 19:48:28 adam.happyassassin.net systemd[1]: Collecting (null)
Mar 13 19:48:28 adam.happyassassin.net systemd[1]: Collecting (null)
Mar 13 19:48:28 adam.happyassassin.net systemd[1]: Collecting (null)
Mar 13 19:48:28 adam.happyassassin.net systemd[1]: Collecting (null)
Mar 13 19:48:28 adam.happyassassin.net systemd[1]: Collecting (null)
Mar 13 19:48:28 adam.happyassassin.net systemd[1]: Collecting (null)
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 11:31:20 +0000 (07:31 -0400)]
libudev-monitor: use initialization
Kay Sievers [Sun, 15 Mar 2015 18:44:59 +0000 (19:44 +0100)]
timesyncd: enable timesyncd in virtual machines
On Fri, Mar 13, 2015 at 8:25 PM, Michael Marineau <michael.marineau@coreos.com> wrote:
> Currently systemd-timesyncd.service includes
> ConditionVirtualization=no, disabling it in both containers and
> virtual machines. Each VM platform tends to deal with or ignore the
> time problem in their own special ways, KVM/QEMU has the kernel time
> source kvm-clock, Xen has had different schemes over the years, VMware
> expects a userspace daemon sync the clock, and other platforms are
> content to drift with the wind as far as I can tell.
>
> I don't know of a robust way to know if a platform needs a little
> extra help from userspace to keep the clock sane or not but it seems
> generally safer to try than to risk drifting. Does anyone know of a
> reason to leave timesyncd off by default? Otherwise switching to
> ConditionVirtualization=!container should be reasonable.
Zbigniew Jędrzejewski-Szmek [Wed, 4 Mar 2015 15:31:42 +0000 (10:31 -0500)]
journald: add syslog fields for audit messages
Audit messages would be displayed as "unknown[1]".
Also specify AUTH as facility... This seems to be the closest match
(/* security/authorization messages */).
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 02:56:01 +0000 (22:56 -0400)]
sysctl: tweak debug message
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 02:35:30 +0000 (22:35 -0400)]
cryptsetup-generator: remove warning about crypttab access mode
This file contains no privileged data — just names of devices to decrypt
and files containing keys. On a running system most of this can be inferred from
the device tree anyway.
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 02:22:49 +0000 (22:22 -0400)]
udev: downgrade "has devpath" and "filled with db file" messages
Udev debug messages have to be significantly overhauled... For now
just downgrade those two. They are responsible for approximately 25%
of debug output during boot and are rather useless.
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 02:15:05 +0000 (22:15 -0400)]
gpt-auto-generator: prefix messages with device name
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 01:49:10 +0000 (21:49 -0400)]
core: do not use quotes around virt and arch
Quotes are useful when the string can contain spaces or be otherwise
confusing. Not possible with those two.
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 01:46:59 +0000 (21:46 -0400)]
sysv-generator: initialize LookupPaths just once
With debugging on, sysv-generator would print the full set of
lookup paths for *every* sysv script.
While at it, pass LookupPaths as a pointer in sysv-generator,
and constify it everywhere.
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 00:24:47 +0000 (20:24 -0400)]
tmpfiles: remove redundant debug message
Mar 13 19:48:30 adam.happyassassin.net systemd-tmpfiles[970]: "/var/lib/machines" has right mode 40700
Mar 13 19:48:30 adam.happyassassin.net systemd-tmpfiles[970]: /var/lib/machines created successfully.
Zbigniew Jędrzejewski-Szmek [Sun, 15 Mar 2015 00:14:39 +0000 (20:14 -0400)]
util: remove redundant debug message
mar 14 20:05:34 fedora22 systemd[4058]: /usr/lib/systemd/system-generators/kdump-dep-generator.sh will be executed.
mar 14 20:05:34 fedora22 systemd[4058]: Spawned /usr/lib/systemd/system-generators/kdump-dep-generator.sh as 4059.
The second line already says everything.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 21:56:13 +0000 (17:56 -0400)]
units: there is no systemd-udev-hwdb-update.service
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 21:41:53 +0000 (17:41 -0400)]
core: remove left-over debug message
Michael Biebl [Sat, 14 Mar 2015 15:48:54 +0000 (16:48 +0100)]
service: don't add After= dependencies on .busname units if kdbus support is disabled
Shawn Landden [Wed, 11 Mar 2015 04:01:47 +0000 (21:01 -0700)]
udev-ctrl: fix strict aliasing issues
it is ironic that
"The only purpose of this structure is to cast the structure pointer
passed in addr in order to avoid compiler warnings. See EXAMPLE below."
from bind(2)
Shawn Landden [Wed, 11 Mar 2015 03:45:15 +0000 (20:45 -0700)]
sd-dhcp-client: fix strict aliasing issue
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 01:35:32 +0000 (21:35 -0400)]
man: add sd_event_{run,wait,prepare,dispatch,loop}
Tom Gundersen [Sat, 14 Mar 2015 11:09:20 +0000 (12:09 +0100)]
sd-event: sd_event_run - only return 0 on timeout
sd_event_dispatch() returns 0 on FINISH, so let's eat that up.
Tom Gundersen [Sat, 14 Mar 2015 10:47:35 +0000 (11:47 +0100)]
sd-event: rename PASSIVE/PREPARED to INITIAL/ARMED
Will Woods [Fri, 13 Mar 2015 21:24:46 +0000 (17:24 -0400)]
selinux: fix SEGV during switch-root if SELinux policy loaded
If you've got SELinux policy loaded, label_hnd is your labeling handle.
When systemd is shutting down, we free that handle via mac_selinux_finish().
But: switch_root() calls mkdir_p_label(), which tries to look up a label
using that freed handle, and so we get a bunch of garbage and eventually
SEGV in libselinux.
(This doesn't happen in the switch-root from initramfs to real root because
there's no SELinux policy loaded in initramfs, so label_hnd is NULL and we
never attempt any lookups.)
So: make sure that mac_selinux_finish() actually sets label_hnd to NULL, so
nobody tries to use it after it becomes invalid.
https://bugzilla.redhat.com/show_bug.cgi?id=1185604
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:26:47 +0000 (21:26 -0500)]
man: fix indentation of copyright headers
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:26:34 +0000 (21:26 -0500)]
man: no paren in link
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:26:20 +0000 (21:26 -0500)]
man: fix name of systemd.journal-fields(7)
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:26:06 +0000 (21:26 -0500)]
man: fix link to strerror(3)
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:25:52 +0000 (21:25 -0500)]
man: s/sd_bus_message_get_seqno/sd_bus_message_get_seqnum/
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:25:37 +0000 (21:25 -0500)]
man: fix name of systemd.resource-control(5)
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:24:30 +0000 (21:24 -0500)]
man: link to fd.o for dbus stuff
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:23:24 +0000 (21:23 -0500)]
man: link to freebsd.org for inetd(8)
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:22:39 +0000 (21:22 -0500)]
man: fix a bunch of links
All hail linkchecker!
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:22:05 +0000 (21:22 -0500)]
sd-daemon: simplify sd_pid_notify_with_fds
Coverity was complaining that CMSG_NXTHDR is used without
checking the return value. In this case it cannot fail, but
it is a good excuse to simplify the function a bit.
CID #1261726.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:22:02 +0000 (21:22 -0500)]
udev: properly calculate size of remaining data
The data comes from the kernel, so chances of it being
garbled are low, but for correctness' sake, add the check.
CID #996458.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:22:00 +0000 (21:22 -0500)]
test-dhcp-option: conform to usual coding style
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:21:58 +0000 (21:21 -0500)]
test-dhcp-option: add assert to check index is nonnegative
CID #1237623.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:21:52 +0000 (21:21 -0500)]
core: check asprintf return value
CID #1261729.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:21:46 +0000 (21:21 -0500)]
core: print warning on invalid swap pri= field
CID #1264371.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:21:41 +0000 (21:21 -0500)]
core: one more (void)
CID #996308.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:21:38 +0000 (21:21 -0500)]
logind: explicitly ignore errors we can do nothing about
CID #1237545.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:21:05 +0000 (21:21 -0500)]
bus: explicitly ignore failure during error handling
CID #1237548.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:20:59 +0000 (21:20 -0500)]
core: explicitly ignore failure during cleanup
CID #1237550.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:20:53 +0000 (21:20 -0500)]
core: don't wait for reply if writing to pipe fails
This shouldn't really happen, but it's seems cleaner to
continue on error.
CID #1237552.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:20:47 +0000 (21:20 -0500)]
core: either ignore or handle mount failures
/dev/pts/ptmx is as important as /dev/pts, so error out if that
fails. Others seem less important, since the namespace is usable
without them, so ignore failures.
CID #123755, #123754.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:20:01 +0000 (21:20 -0500)]
Use space after a silencing (void)
We were using a space more often than not, and this way is
codified in CODING_STYLE.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:11:09 +0000 (21:11 -0500)]
core: ignore any issues with setting time on jobs_in_progress_event_source
CID #1237559.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:11:05 +0000 (21:11 -0500)]
sd-resolve: use different element of union to make code more readable
They both point to the same location, but the reader
is not forced to look back to the beginning of the function
to see that.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:11:03 +0000 (21:11 -0500)]
journal-remote: explain why source->buf cannot be null
In reference to CID #1238956.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:10:19 +0000 (21:10 -0500)]
Check that EWOULDBLOCK is the same as EAGAIN
It certainly is everywhere on Linux, but as a courtesy
to people doing some strange cross-compilation, check
that the assumption holds.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:10:17 +0000 (21:10 -0500)]
journal-remote: make process_data static
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:10:15 +0000 (21:10 -0500)]
nspawn: tell coverity that we ignore return value
CID #1271353.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:10:13 +0000 (21:10 -0500)]
gpt-auto-generator: allow type check to fail
add_mount() is OK with unknow file type, but we have to initalize
the variable to NULL not to pass garbage on error.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:10:12 +0000 (21:10 -0500)]
efi: widen operand to avoid overflow
CID #1287141.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:10:06 +0000 (21:10 -0500)]
core: issue error on oom we can do nothing about
CID #1287142.
Zbigniew Jędrzejewski-Szmek [Sat, 14 Mar 2015 02:07:45 +0000 (21:07 -0500)]
µhttp-util: setup gnutls logs in one function
Tom Gundersen [Fri, 13 Mar 2015 17:43:00 +0000 (18:43 +0100)]
udev: make set_usec_initialized() internal to libudev
Instead introduce ensure_usec_initialized(), which copies the timestamp if possible otherwise
sets it to now(CLOCK_MONOTONIC).
Tom Gundersen [Fri, 13 Mar 2015 15:15:03 +0000 (16:15 +0100)]
sd-rtnl: read_message - don't set group if not needed