review.tizen.org Git - platform/kernel/linux-starfive.git/log

mm: fix unexpected changes to {failslab|fail_page_alloc}.attr

When we specify __GFP_NOWARN, we only expect that no warnings will be
issued for current caller. But in the __should_failslab() and
__should_fail_alloc_page(), the local GFP flags alter the global
{failslab|fail_page_alloc}.attr, which is persistent and shared by all
tasks. This is not what we expected, let's fix it.

[akpm@linux-foundation.org: unexport should_fail_ex()]
Link: https://lkml.kernel.org/r/20221118100011.2634-1-zhengqi.arch@bytedance.com
Fixes: 3f913fc5f974 ("mm: fix missing handler for __GFP_NOWARN")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

swapfile: fix soft lockup in scan_swap_map_slots

A softlockup occurs in scan free swap slot under huge memory pressure.
The test scenario is: 64 CPU cores, 64GB memory, and 28 zram devices, the
disksize of each zram device is 50MB.

LATENCY_LIMIT is used to prevent softlockups in scan_swap_map_slots(), but
the real loop number would more than LATENCY_LIMIT because of "goto checks
and goto scan" repeatly without decreasing latency limit.

In order to fix it, decrease latency_ration in advance.

There is also a suspicious place that will cause softlockups in
get_swap_pages(). In this function, the "goto start_over" may result in
continuous scanning of the swap partition. If there is no cond_sched in
scan_swap_map_slots(), it would cause a softlockup (I am not sure about
this).

WARN: soft lockup - CPU#11 stuck for 11s! [kswapd0:466]
CPU: 11 PID: 466 Comm: kswapd@ Kdump: loaded Tainted: G
dump backtrace+0x0/0x1le4
show stack+0x20/@x2c
dump_stack+0xd8/0x140
watchdog print_info+0x48/0x54
watchdog_process_before_softlockup+0x98/0xa0
watchdog_timer_fn+0xlac/0x2d0
hrtimer_rum_queues+0xb0/0x130
hrtimer_interrupt+0x13c/0x3c0
arch_timer_handler_virt+0x3c/0x50
handLe_percpu_devid_irq+0x90/0x1f4
handle domain irq+0x84/0x100
gic_handle_irq+0x88/0x2b0
e11 ira+0xhB/Bx140
scan_swap_map_slots+0x678/0x890
get_swap_pages+0x29c/0x440
get_swap_page+0x120/0x2e0
add_to_swap+UX2U/0XyC
shrink_page_list+0x5d0/0x152c
shrink_inactive_list+0xl6c/Bx500
shrink_lruvec+0x270/0x304

WARN: soft lockup - CPU#32 stuck for 11s! [stress-ng:309915]
watchdog_timer_fn+0x1ac/0x2d0
__run_hrtimer+0x98/0x2a0
__hrtimer_run_queues+0xb0/0x130
hrtimer_interrupt+0x13c/0x3c0
arch_timer_handler_virt+0x3c/0x50
handle_percpu_devid_irq+0x90/0x1f4
__handle_domain_irq+0x84/0x100
gic_handle_irq+0x88/0x2b0
el1_irq+0xb8/0x140
get_swap_pages+0x1e8/0x440
get_swap_page+0x1c8/0x2e0
add_to_swap+0x20/0x9c
shrink_page_list+0x5d0/0x152c
reclaim_pages+0x160/0x310
madvise_cold_or_pageout_pte_range+0x7bc/0xe3c
walk_pmd_range.isra.0+0xac/0x22c
walk_pud_range+0xfc/0x1c0
walk_pgd_range+0x158/0x1b0
__walk_page_range+0x64/0x100
walk_page_range+0x104/0x150

Link: https://lkml.kernel.org/r/20221118133850.3360369-1-chenwandun@huawei.com
Fixes: 048c27fd7281 ("[PATCH] swap: scan_swap_map latency breaks")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: <xialonglong1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

hugetlb: fix __prep_compound_gigantic_page page flag setting

Commit 2b21624fc232 ("hugetlb: freeze allocated pages before creating
hugetlb pages") changed the order page flags were cleared and set in the
head page.  It moved the __ClearPageReserved after __SetPageHead.
However, there is a check to make sure __ClearPageReserved is never done
on a head page.  If CONFIG_DEBUG_VM_PGFLAGS is enabled, the following BUG
will be hit when creating a hugetlb gigantic page:

    page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
    ------------[ cut here ]------------
    kernel BUG at include/linux/page-flags.h:500!
    Call Trace will differ depending on whether hugetlb page is created
    at boot time or run time.

Make sure to __ClearPageReserved BEFORE __SetPageHead.

Link: https://lkml.kernel.org/r/20221118195249.178319-1-mike.kravetz@oracle.com
Fixes: 2b21624fc232 ("hugetlb: freeze allocated pages before creating hugetlb pages")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Tarun Sahu <tsahu@linux.ibm.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kfence: fix stack trace pruning

Commit b14051352465 ("mm/sl[au]b: generalize kmalloc subsystem")
refactored large parts of the kmalloc subsystem, resulting in the stack
trace pruning logic done by KFENCE to no longer work.

While b14051352465 attempted to fix the situation by including
'__kmem_cache_free' in the list of functions KFENCE should skip through,
this only works when the compiler actually optimized the tail call from
kfree() to __kmem_cache_free() into a jump (and thus kfree() _not_
appearing in the full stack trace to begin with).

In some configurations, the compiler no longer optimizes the tail call
into a jump, and __kmem_cache_free() appears in the stack trace.  This
means that the pruned stack trace shown by KFENCE would include kfree()
which is not intended - for example:

| BUG: KFENCE: invalid free in kfree+0x7c/0x120
|
| Invalid free of 0xffff8883ed8fefe0 (in kfence-#126):
|  kfree+0x7c/0x120
|  test_double_free+0x116/0x1a9
|  kunit_try_run_case+0x90/0xd0
| [...]

Fix it by moving __kmem_cache_free() to the list of functions that may be
tail called by an allocator entry function, making the pruning logic work
in both the optimized and unoptimized tail call cases.

Link: https://lkml.kernel.org/r/20221118152216.3914899-1-elver@google.com
Fixes: b14051352465 ("mm/sl[au]b: generalize kmalloc subsystem")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

proc/meminfo: fix spacing in SecPageTables

SecPageTables has a tab after it instead of a space, this can break
fragile parsers that depend on spaces after the stat names.

Link: https://lkml.kernel.org/r/20221117043247.133294-1-yosryahmed@google.com
Fixes: ebc97a52b5d6cd5f ("mm: add NR_SECONDARY_PAGETABLE to count secondary page table uses.")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: multi-gen LRU: retry folios written back while isolated

The page reclaim isolates a batch of folios from the tail of one of the
LRU lists and works on those folios one by one.  For a suitable
swap-backed folio, if the swap device is async, it queues that folio for
writeback.  After the page reclaim finishes an entire batch, it puts back
the folios it queued for writeback to the head of the original LRU list.

In the meantime, the page writeback flushes the queued folios also by
batches.  Its batching logic is independent from that of the page reclaim.
For each of the folios it writes back, the page writeback calls
folio_rotate_reclaimable() which tries to rotate a folio to the tail.

folio_rotate_reclaimable() only works for a folio after the page reclaim
has put it back.  If an async swap device is fast enough, the page
writeback can finish with that folio while the page reclaim is still
working on the rest of the batch containing it.  In this case, that folio
will remain at the head and the page reclaim will not retry it before
reaching there.

This patch adds a retry to evict_folios().  After evict_folios() has
finished an entire batch and before it puts back folios it cannot free
immediately, it retries those that may have missed the rotation.

Before this patch, ~60% of folios swapped to an Intel Optane missed
folio_rotate_reclaimable().  After this patch, ~99% of missed folios were
reclaimed upon retry.

This problem affects relatively slow async swap devices like Samsung 980
Pro much less and does not affect sync swap devices like zram or zswap at
all.

Link: https://lkml.kernel.org/r/20221116013808.3995280-1-yuzhao@google.com
Fixes: ac35a4902374 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: "Yin, Fengwei" <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: update email address for Satya Priya

Add and also update email address, skakit@codeaurora.org is no longer
active.

Link: https://lkml.kernel.org/r/20221116105017.3018971-1-quic_c_skakit@quicinc.com
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/migrate_device: return number of migrating pages in args->cpages

migrate_vma->cpages originally contained a count of the number of pages
migrating including non-present pages which can be populated directly on
the target.

Commit 241f68859656 ("mm/migrate_device.c: refactor migrate_vma and
migrate_device_coherent_page()") inadvertantly changed this to contain
just the number of pages that were unmapped. Usage of migrate_vma->cpages
isn't documented, but most drivers use it to see if all the requested
addresses can be migrated so restore the original behaviour.

Link: https://lkml.kernel.org/r/20221111005135.1344004-1-apopple@nvidia.com
Fixes: 241f68859656 ("mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible

Add missing <linux/string.h> include for strcmp.

Clang 16 makes -Wimplicit-function-declaration an error by default.
Unfortunately, out of tree modules may use this in configure scripts,
which means failure might cause silent miscompilation or misconfiguration.

For more information, see LWN.net [0] or LLVM's Discourse [1], gentoo-dev@ [2],
or the (new) c-std-porting mailing list [3].

[0] https://lwn.net/Articles/913505/
[1] https://discourse.llvm.org/t/configure-script-breakage-with-the-new-werror-implicit-function-declaration/65213
[2] https://archives.gentoo.org/gentoo-dev/message/dd9f2d3082b8b6f8dfbccb0639e6e240
[3] hosted at lists.linux.dev.

[akpm@linux-foundation.org: remember "linux/"]
Link: https://lkml.kernel.org/r/20221116182634.2823136-1-sam@gentoo.org
Signed-off-by: Sam James <sam@gentoo.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: update Alex Hung's email address

Use my personal email address.

Link: https://lkml.kernel.org/r/20221114001302.671897-2-alex.hung@amd.com
Signed-off-by: Alex Hung <alexhung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mailmap: update Alex Hung's email address

I am no longer at Canonical and add entry of my personal email address.

Link: https://lkml.kernel.org/r/20221114001302.671897-1-alex.hung@amd.com
Signed-off-by: Alex Hung <alexhung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: mmap: fix documentation for vma_mas_szero

When the struct_mm input, mm, was changed to a struct ma_state, mas, the
documentation for the function was never updated. This updates that
documentation reference.

Link: https://lkml.kernel.org/r/20221114003349.41235-1-ian@linux.cowan.aero
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/sysfs-schemes: skip stats update if the scheme directory is removed

A DAMON sysfs interface user can start DAMON with a scheme, remove the
sysfs directory for the scheme, and then ask update of the scheme's stats.
Because the schemes stats update logic isn't aware of the situation, it
results in an invalid memory access. Fix the bug by checking if the
scheme sysfs directory exists.

Link: https://lkml.kernel.org/r/20221114175552.1951-1-sj@kernel.org
Fixes: 0ac32b8affb5 ("mm/damon/sysfs: support DAMOS stats")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [v5.18]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memory: return vm_fault_t result from migrate_to_ram() callback

The migrate_to_ram() callback should always succeed, but in rare cases can
fail usually returning VM_FAULT_SIGBUS. Commit 16ce101db85d
("mm/memory.c: fix race when faulting a device private page") incorrectly
stopped passing the return code up the stack. Fix this by setting the ret
variable, restoring the previous behaviour on migrate_to_ram() failure.

Link: https://lkml.kernel.org/r/20221114115537.727371-1-apopple@nvidia.com
Fixes: 16ce101db85d ("mm/memory.c: fix race when faulting a device private page")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: correctly charge compressed memory to its memcg

Kswapd will reclaim memory when memory pressure is high, the annonymous
memory will be compressed and stored in the zpool if zswap is enabled.
The memcg_kmem_bypass() in get_obj_cgroup_from_page() will bypass the
kernel thread and cause the compressed memory not be charged to its memory
cgroup.

Remove the memcg_kmem_bypass() call and properly charge compressed memory
to its corresponding memory cgroup.

Link: https://lore.kernel.org/linux-mm/CALvZod4nnn8BHYqAM4xtcR0Ddo2-Wr8uKm9h_CHWUaXw7g_DCg@mail.gmail.com/
Link: https://lkml.kernel.org/r/20221114194828.100822-1-hannes@cmpxchg.org
Fixes: f4840ccfca25 ("zswap: memcg accounting")
Signed-off-by: Li Liguang <liliguang@baidu.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ipc/shm: call underlying open/close vm_ops

Shared memory segments can be created that are backed by hugetlb pages.
When this happens, the vmas associated with any mappings (shmat) are
marked VM_HUGETLB, yet the vm_ops for such mappings are provided by
ipc/shm (shm_vm_ops).  There is a mechanism to call the underlying hugetlb
vm_ops, and this is done for most operations.  However, it is not done for
open and close.

This was not an issue until the introduction of the hugetlb vma_lock.
This lock structure is pointed to by vm_private_data and the open/close
vm_ops help maintain this structure.  The special hugetlb routine called
at fork took care of structure updates at fork time.  However,
vma_splitting is not properly handled for ipc shared memory mappings
backed by hugetlb pages.  This can result in a "kernel NULL pointer
dereference" BUG or use after free as two vmas point to the same lock
structure.

Update the shm open and close routines to always call the underlying open
and close routines.

Link: https://lkml.kernel.org/r/20221114210018.49346-1-mike.kravetz@oracle.com
Fixes: 8d9bfb260814 ("hugetlb: add vma based lock for pmd sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Doug Nelson <doug.nelson@intel.com>
Reported-by: <syzbot+83b4134621b7c326d950@syzkaller.appspotmail.com>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

gcov: clang: fix the buffer overflow issue

Currently, in clang version of gcov code when module is getting removed
gcov_info_add() incorrectly adds the sfn_ptr->counter to all the
dst->functions and it result in the kernel panic in below crash report.
Fix this by properly handling it.

[    8.899094][  T599] Unable to handle kernel write to read-only memory at virtual address ffffff80461cc000
[    8.899100][  T599] Mem abort info:
[    8.899102][  T599]   ESR = 0x9600004f
[    8.899103][  T599]   EC = 0x25: DABT (current EL), IL = 32 bits
[    8.899105][  T599]   SET = 0, FnV = 0
[    8.899107][  T599]   EA = 0, S1PTW = 0
[    8.899108][  T599]   FSC = 0x0f: level 3 permission fault
[    8.899110][  T599] Data abort info:
[    8.899111][  T599]   ISV = 0, ISS = 0x0000004f
[    8.899113][  T599]   CM = 0, WnR = 1
[    8.899114][  T599] swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000ab8de000
[    8.899116][  T599] [ffffff80461cc000] pgd=18000009ffcde003, p4d=18000009ffcde003, pud=18000009ffcde003, pmd=18000009ffcad003, pte=00600000c61cc787
[    8.899124][  T599] Internal error: Oops: 9600004f [#1] PREEMPT SMP
[    8.899265][  T599] Skip md ftrace buffer dump for: 0x1609e0
....
..,
[    8.899544][  T599] CPU: 7 PID: 599 Comm: modprobe Tainted: G S         OE     5.15.41-android13-8-g38e9b1af6bce #1
[    8.899547][  T599] Hardware name: XXX (DT)
[    8.899549][  T599] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[    8.899551][  T599] pc : gcov_info_add+0x9c/0xb8
[    8.899557][  T599] lr : gcov_event+0x28c/0x6b8
[    8.899559][  T599] sp : ffffffc00e733b00
[    8.899560][  T599] x29: ffffffc00e733b00 x28: ffffffc00e733d30 x27: ffffffe8dc297470
[    8.899563][  T599] x26: ffffffe8dc297000 x25: ffffffe8dc297000 x24: ffffffe8dc297000
[    8.899566][  T599] x23: ffffffe8dc0a6200 x22: ffffff880f68bf20 x21: 0000000000000000
[    8.899569][  T599] x20: ffffff880f68bf00 x19: ffffff8801babc00 x18: ffffffc00d7f9058
[    8.899572][  T599] x17: 0000000000088793 x16: ffffff80461cbe00 x15: 9100052952800785
[    8.899575][  T599] x14: 0000000000000200 x13: 0000000000000041 x12: 9100052952800785
[    8.899577][  T599] x11: ffffffe8dc297000 x10: ffffffe8dc297000 x9 : ffffff80461cbc80
[    8.899580][  T599] x8 : ffffff8801babe80 x7 : ffffffe8dc2ec000 x6 : ffffffe8dc2ed000
[    8.899583][  T599] x5 : 000000008020001f x4 : fffffffe2006eae0 x3 : 000000008020001f
[    8.899586][  T599] x2 : ffffff8027c49200 x1 : ffffff8801babc20 x0 : ffffff80461cb3a0
[    8.899589][  T599] Call trace:
[    8.899590][  T599]  gcov_info_add+0x9c/0xb8
[    8.899592][  T599]  gcov_module_notifier+0xbc/0x120
[    8.899595][  T599]  blocking_notifier_call_chain+0xa0/0x11c
[    8.899598][  T599]  do_init_module+0x2a8/0x33c
[    8.899600][  T599]  load_module+0x23cc/0x261c
[    8.899602][  T599]  __arm64_sys_finit_module+0x158/0x194
[    8.899604][  T599]  invoke_syscall+0x94/0x2bc
[    8.899607][  T599]  el0_svc_common+0x1d8/0x34c
[    8.899609][  T599]  do_el0_svc+0x40/0x54
[    8.899611][  T599]  el0_svc+0x94/0x2f0
[    8.899613][  T599]  el0t_64_sync_handler+0x88/0xec
[    8.899615][  T599]  el0t_64_sync+0x1b4/0x1b8
[    8.899618][  T599] Code: f905f56c f86e69ec f86e6a0f 8b0c01ec (f82e6a0c)
[    8.899620][  T599] ---[ end trace ed5218e9e5b6e2e6 ]---

Link: https://lkml.kernel.org/r/1668020497-13142-1-git-send-email-quic_mojha@quicinc.com
Fixes: e178a5beb369 ("gcov: clang support")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org> [5.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/khugepaged: refactor mm_khugepaged_scan_file tracepoint to remove filename from function call

Refactor the mm_khugepaged_scan_file tracepoint to move filename
dereference to the tracepoint definition, to maintain consistency with
other tracepoints[1].

[1]:lore.kernel.org/lkml/20221024111621.3ba17e2c@gandalf.local.home/

Link: https://lkml.kernel.org/r/20221026044524.54793-1-gautammenghani201@gmail.com
Fixes: d41fd2016ed07 ("mm/khugepaged: add tracepoint to hpage_collapse_scan_file()")
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/page_exit: fix kernel doc warning in page_ext_put()

Fix the below compiler warnings reported with 'make W=1 mm/'.
mm/page_ext.c:178: warning: Function parameter or member 'page_ext' not
described in 'page_ext_put'.

[quic_pkondeti@quicinc.com: better patch title]
Link: https://lkml.kernel.org/r/1667884582-2465-1-git-send-email-quic_charante@quicinc.com
Fixes: b1d5488a252dc9 ("mm: fix use-after free of page_ext after race with memory-offline")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavan Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: khugepaged: allow page allocation fallback to eligible nodes

Syzbot reported the below splat:

WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 __alloc_pages_node include/linux/gfp.h:221 [inline]
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 hpage_collapse_alloc_page mm/khugepaged.c:807 [inline]
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 alloc_charge_hpage+0x802/0xaa0 mm/khugepaged.c:963
Modules linked in:
CPU: 1 PID: 3646 Comm: syz-executor210 Not tainted 6.1.0-rc1-syzkaller-00454-ga70385240892 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
RIP: 0010:__alloc_pages_node include/linux/gfp.h:221 [inline]
RIP: 0010:hpage_collapse_alloc_page mm/khugepaged.c:807 [inline]
RIP: 0010:alloc_charge_hpage+0x802/0xaa0 mm/khugepaged.c:963
Code: e5 01 4c 89 ee e8 6e f9 ae ff 4d 85 ed 0f 84 28 fc ff ff e8 70 fc ae ff 48 8d 6b ff 4c 8d 63 07 e9 16 fc ff ff e8 5e fc ae ff <0f> 0b e9 96 fa ff ff 41 bc 1a 00 00 00 e9 86 fd ff ff e8 47 fc ae
RSP: 0018:ffffc90003fdf7d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888077f457c0 RSI: ffffffff81cd8f42 RDI: 0000000000000001
RBP: ffff888079388c0c R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f6b48ccf700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6b48a819f0 CR3: 00000000171e7000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
collapse_file+0x1ca/0x5780 mm/khugepaged.c:1715
hpage_collapse_scan_file+0xd6c/0x17a0 mm/khugepaged.c:2156
madvise_collapse+0x53a/0xb40 mm/khugepaged.c:2611
madvise_vma_behavior+0xd0a/0x1cc0 mm/madvise.c:1066
madvise_walk_vmas+0x1c7/0x2b0 mm/madvise.c:1240
do_madvise.part.0+0x24a/0x340 mm/madvise.c:1419
do_madvise mm/madvise.c:1432 [inline]
__do_sys_madvise mm/madvise.c:1432 [inline]
__se_sys_madvise mm/madvise.c:1430 [inline]
__x64_sys_madvise+0x113/0x150 mm/madvise.c:1430
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f6b48a4eef9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6b48ccf318 EFLAGS: 00000246 ORIG_RAX: 000000000000001c
RAX: ffffffffffffffda RBX: 00007f6b48af0048 RCX: 00007f6b48a4eef9
RDX: 0000000000000019 RSI: 0000000000600003 RDI: 0000000020000000
RBP: 00007f6b48af0040 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6b48aa53a4
R13: 00007f6b48bffcbf R14: 00007f6b48ccf400 R15: 0000000000022000
</TASK>

The khugepaged code would pick up the node with the most hit as the preferred
node, and also tries to do some balance if several nodes have the same
hit record.  Basically it does conceptually:
    * If the target_node <= last_target_node, then iterate from
last_target_node + 1 to MAX_NUMNODES (1024 on default config)
    * If the max_value == node_load[nid], then target_node = nid

But there is a corner case, paritucularly for MADV_COLLAPSE, that the
non-existing node may be returned as preferred node.

Assuming the system has 2 nodes, the target_node is 0 and the
last_target_node is 1, if MADV_COLLAPSE path is hit, the max_value may
be 0, then it may return 2 for target_node, but it is actually not
existing (offline), so the warn is triggered.

The node balance was introduced by commit 9f1b868a13ac ("mm: thp:
khugepaged: add policy for finding target node") to satisfy
"numactl --interleave=all".  But interleaving is a mere hint rather than
something that has hard requirements.

So use nodemask to record the nodes which have the same hit record, the
hugepage allocation could fallback to those nodes.  And remove
__GFP_THISNODE since it does disallow fallback.  And if the nodemask
just has one node set, it means there is one single node has the most
hit record, the nodemask approach actually behaves like __GFP_THISNODE.

Link: https://lkml.kernel.org/r/20221108184357.55614-2-shy828301@gmail.com
Fixes: 7d8faaf15545 ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Suggested-by: Zach O'Keefe <zokeefe@google.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reported-by: <syzbot+0044b22d177870ee974f@syzkaller.appspotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: vmscan: fix extreme overreclaim and swap floods

During proactive reclaim, we sometimes observe severe overreclaim, with
several thousand times more pages reclaimed than requested.

This trace was obtained from shrink_lruvec() during such an instance:

    prio:0 anon_cost:1141521 file_cost:7767
    nr_reclaimed:4387406 nr_to_reclaim:1047 (or_factor:4190)
    nr=[7161123 345 578 1111]

While he reclaimer requested 4M, vmscan reclaimed close to 16G, most of it
by swapping.  These requests take over a minute, during which the write()
to memory.reclaim is unkillably stuck inside the kernel.

Digging into the source, this is caused by the proportional reclaim
bailout logic.  This code tries to resolve a fundamental conflict: to
reclaim roughly what was requested, while also aging all LRUs fairly and
in accordance to their size, swappiness, refault rates etc.  The way it
attempts fairness is that once the reclaim goal has been reached, it stops
scanning the LRUs with the smaller remaining scan targets, and adjusts the
remainder of the bigger LRUs according to how much of the smaller LRUs was
scanned.  It then finishes scanning that remainder regardless of the
reclaim goal.

This works fine if priority levels are low and the LRU lists are
comparable in size.  However, in this instance, the cgroup that is
targeted by proactive reclaim has almost no files left - they've already
been squeezed out by proactive reclaim earlier - and the remaining anon
pages are hot.  Anon rotations cause the priority level to drop to 0,
which results in reclaim targeting all of anon (a lot) and all of file
(almost nothing).  By the time reclaim decides to bail, it has scanned
most or all of the file target, and therefor must also scan most or all of
the enormous anon target.  This target is thousands of times larger than
the reclaim goal, thus causing the overreclaim.

The bailout code hasn't changed in years, why is this failing now?  The
most likely explanations are two other recent changes in anon reclaim:

1. Before the series starting with commit 5df741963d52 ("mm: fix LRU
   balancing effect of new transparent huge pages"), the VM was
   overall relatively reluctant to swap at all, even if swap was
   configured. This means the LRU balancing code didn't come into play
   as often as it does now, and mostly in high pressure situations
   where pronounced swap activity wouldn't be as surprising.

2. For historic reasons, shrink_lruvec() loops on the scan targets of
   all LRU lists except the active anon one, meaning it would bail if
   the only remaining pages to scan were active anon - even if there
   were a lot of them.

   Before the series starting with commit ccc5dc67340c ("mm/vmscan:
   make active/inactive ratio as 1:1 for anon lru"), most anon pages
   would live on the active LRU; the inactive one would contain only a
   handful of preselected reclaim candidates. After the series, anon
   gets aged similarly to file, and the inactive list is the default
   for new anon pages as well, making it often the much bigger list.

   As a result, the VM is now more likely to actually finish large
   anon targets than before.

Change the code such that only one SWAP_CLUSTER_MAX-sized nudge toward the
larger LRU lists is made before bailing out on a met reclaim goal.

This fixes the extreme overreclaim problem.

Fairness is more subtle and harder to evaluate.  No obvious misbehavior
was observed on the test workload, in any case.  Conceptually, fairness
should primarily be a cumulative effect from regular, lower priority
scans.  Once the VM is in trouble and needs to escalate scan targets to
make forward progress, fairness needs to take a backseat.  This is also
acknowledged by the myriad exceptions in get_scan_count().  This patch
makes fairness decrease gradually, as it keeps fairness work static over
increasing priority levels with growing scan targets.  This should make
more sense - although we may have to re-visit the exact values.

Link: https://lkml.kernel.org/r/20220802162811.39216-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

docs: kmsan: fix formatting of "Example report"

Add a blank line to make the sentence before the list render as a separate
paragraph, not a definition.

Link: https://lkml.kernel.org/r/20221107142255.4038811-1-glider@google.com
Fixes: 93858ae70cf4 ("kmsan: add ReST documentation")
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/damon/dbgfs: check if rm_contexts input is for a real context

A user could write a name of a file under 'damon/' debugfs directory,
which is not a user-created context, to 'rm_contexts' file.  In the case,
'dbgfs_rm_context()' just assumes it's the valid DAMON context directory
only if a file of the name exist.  As a result, invalid memory access
could happen as below.  Fix the bug by checking if the given input is for
a directory.  This check can filter out non-context inputs because
directories under 'damon/' debugfs directory can be created via only
'mk_contexts' file.

This bug has found by syzbot[1].

[1] https://lore.kernel.org/damon/000000000000ede3ac05ec4abf8e@google.com/

Link: https://lkml.kernel.org/r/20221107165001.5717-2-sj@kernel.org
Fixes: 75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: syzbot+6087eafb76a94c4ac9eb@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> [5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: don't set a new maximum on the node when not reusing nodes

In RCU mode, the node limits were being updated to the last pivot which
may not be correct and would cause the metadata to be set when it
shouldn't. Fix this by not setting a new limit in this case.

Link: https://lkml.kernel.org/r/20221107163857.867377-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: fix depth tracking in maple_state

It is possible to confuse the depth tracking in the maple state by
searching the same node for values. Fix the depth tracking by moving
where the depth is incremented closer to where the node changes level.
Also change the initial depth setting when using the root node.

Link: https://lkml.kernel.org/r/20221107163814.866612-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arch/x86/mm/hugetlbpage.c: pud_huge() returns 0 when using 2-level paging

The following bug is reported to be triggered when starting X on x86-32
system with i915:

  [  225.777375] kernel BUG at mm/memory.c:2664!
  [  225.777391] invalid opcode: 0000 [#1] PREEMPT SMP
  [  225.777405] CPU: 0 PID: 2402 Comm: Xorg Not tainted 6.1.0-rc3-bdg+ #86
  [  225.777415] Hardware name:  /8I865G775-G, BIOS F1 08/29/2006
  [  225.777421] EIP: __apply_to_page_range+0x24d/0x31c
  [  225.777437] Code: ff ff 8b 55 e8 8b 45 cc e8 0a 11 ec ff 89 d8 83 c4 28 5b 5e 5f 5d c3 81 7d e0 a0 ef 96 c1 74 ad 8b 45 d0 e8 2d 83 49 00 eb a3 <0f> 0b 25 00 f0 ff ff 81 eb 00 00 00 40 01 c3 8b 45 ec 8b 00 e8 76
  [  225.777446] EAX: 00000001 EBX: c53a3b58 ECX: b5c00000 EDX: c258aa00
  [  225.777454] ESI: b5c00000 EDI: b5900000 EBP: c4b0fdb4 ESP: c4b0fd80
  [  225.777462] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010202
  [  225.777470] CR0: 80050033 CR2: b5900000 CR3: 053a3000 CR4: 000006d0
  [  225.777479] Call Trace:
  [  225.777486]  ? i915_memcpy_init_early+0x63/0x63 [i915]
  [  225.777684]  apply_to_page_range+0x21/0x27
  [  225.777694]  ? i915_memcpy_init_early+0x63/0x63 [i915]
  [  225.777870]  remap_io_mapping+0x49/0x75 [i915]
  [  225.778046]  ? i915_memcpy_init_early+0x63/0x63 [i915]
  [  225.778220]  ? mutex_unlock+0xb/0xd
  [  225.778231]  ? i915_vma_pin_fence+0x6d/0xf7 [i915]
  [  225.778420]  vm_fault_gtt+0x2a9/0x8f1 [i915]
  [  225.778644]  ? lock_is_held_type+0x56/0xe7
  [  225.778655]  ? lock_is_held_type+0x7a/0xe7
  [  225.778663]  ? 0xc1000000
  [  225.778670]  __do_fault+0x21/0x6a
  [  225.778679]  handle_mm_fault+0x708/0xb21
  [  225.778686]  ? mt_find+0x21e/0x5ae
  [  225.778696]  exc_page_fault+0x185/0x705
  [  225.778704]  ? doublefault_shim+0x127/0x127
  [  225.778715]  handle_exception+0x130/0x130
  [  225.778723] EIP: 0xb700468a

Recently pud_huge() got aware of non-present entry by commit 3a194f3f8ad0
("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present
pud entry") to handle some special states of gigantic page.  However, it's
overlooked that pud_none() always returns false when running with 2-level
paging, and as a result pud_huge() can return true pointlessly.

Introduce "#if CONFIG_PGTABLE_LEVELS > 2" to pud_huge() to deal with this.

Link: https://lkml.kernel.org/r/20221107021010.2449306-1-naoya.horiguchi@linux.dev
Fixes: 3a194f3f8ad0 ("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs: fix leaked psi pressure state

When psi annotations were added to to btrfs compression reads, the psi
state tracking over add_ra_bio_pages and btrfs_submit_compressed_read was
faulty.  A pressure state, once entered, is never left.  This results in
incorrectly elevated pressure, which triggers OOM kills.

pflags record the *previous* memstall state when we enter a new one.  The
code tried to initialize pflags to 1, and then optimize the leave call
when we either didn't enter a memstall, or were already inside a nested
stall.  However, there can be multiple PageWorkingset pages in the bio, at
which point it's that path itself that enters repeatedly and overwrites
pflags.  This causes us to miss the exit.

Enter the stall only once if needed, then unwind correctly.

erofs has the same problem, fix that up too.  And move the memstall exit
past submit_bio() to restore submit accounting originally added by
b8e24a9300b0 ("block: annotate refault stalls from IO submission").

Link: https://lkml.kernel.org/r/Y2UHRqthNUwuIQGS@cmpxchg.org
Fixes: 4088a47e78f9 ("btrfs: add manual PSI accounting for compressed reads")
Fixes: 99486c511f68 ("erofs: add manual PSI accounting for the compressed address space")
Fixes: 118f3663fbc6 ("block: remove PSI accounting from the bio layer")
Link: https://lore.kernel.org/r/d20a0a85-e415-cf78-27f9-77dd7a94bc8d@leemhuis.info/
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix use-after-free bug of ns_writer on remount

If a nilfs2 filesystem is downgraded to read-only due to metadata
corruption on disk and is remounted read/write, or if emergency read-only
remount is performed, detaching a log writer and synchronizing the
filesystem can be done at the same time.

In these cases, use-after-free of the log writer (hereinafter
nilfs->ns_writer) can happen as shown in the scenario below:

Task1                               Task2
--------------------------------    ------------------------------
nilfs_construct_segment
   nilfs_segctor_sync
     init_wait
     init_waitqueue_entry
     add_wait_queue
     schedule
                                     nilfs_remount (R/W remount case)
       nilfs_attach_log_writer
                                         nilfs_detach_log_writer
                                           nilfs_segctor_destroy
                                             kfree
     finish_wait
       _raw_spin_lock_irqsave
         __raw_spin_lock_irqsave
           do_raw_spin_lock
             debug_spin_lock_before  <-- use-after-free

While Task1 is sleeping, nilfs->ns_writer is freed by Task2.  After Task1
waked up, Task1 accesses nilfs->ns_writer which is already freed.  This
scenario diagram is based on the Shigeru Yoshida's post [1].

This patch fixes the issue by not detaching nilfs->ns_writer on remount so
that this UAF race doesn't happen.  Along with this change, this patch
also inserts a few necessary read-only checks with superblock instance
where only the ns_writer pointer was used to check if the filesystem is
read-only.

Link: https://syzkaller.appspot.com/bug?id=79a4c002e960419ca173d55e863bd09e8112df8b
Link: https://lkml.kernel.org/r/20221103141759.1836312-1-syoshida@redhat.com
Link: https://lkml.kernel.org/r/20221104142959.28296-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+f816fa82f8783f7a02bb@syzkaller.appspotmail.com
Reported-by: Shigeru Yoshida <syoshida@redhat.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

x86/traps: avoid KMSAN bugs originating from handle_bug()

There is a case in exc_invalid_op handler that is executed outside the
irqentry_enter()/irqentry_exit() region when an UD2 instruction is used to
encode a call to __warn().

In that case the `struct pt_regs` passed to the interrupt handler is never
unpoisoned by KMSAN (this is normally done in irqentry_enter()), which
leads to false positives inside handle_bug().

Use kmsan_unpoison_entry_regs() to explicitly unpoison those registers
before using them.

Link: https://lkml.kernel.org/r/20221102110611.1085175-5-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kmsan: make sure PREEMPT_RT is off

As pointed out by Peter Zijlstra, __msan_poison_alloca() does not play
well with IRQ code when PREEMPT_RT is on, because in that mode even
GFP_ATOMIC allocations cannot be performed.

Fixing this would require making stackdepot completely lockless, which is
quite challenging and may be excessive for the time being.

Instead, make sure KMSAN is incompatible with PREEMPT_RT, like other debug
configs are.

Link: https://lkml.kernel.org/r/20221102110611.1085175-4-glider@google.com
Link: https://lore.kernel.org/lkml/20221025221755.3810809-1-glider@google.com/
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Kconfig.debug: ensure early check for KMSAN in CONFIG_KMSAN_WARN

As pointed out by Masahiro Yamada, Kconfig picks up the first default
entry which has true 'if' condition. Hence, the previously added check
for KMSAN was never used, because it followed the checks for 64BIT and
!64BIT.

Put KMSAN check before others to ensure it is always applied.

Link: https://lkml.kernel.org/r/20221102110611.1085175-3-glider@google.com
Link: https://github.com/google/kmsan/issues/89
Link: https://lore.kernel.org/linux-mm/20221024212144.2852069-3-glider@google.com/
Fixes: 921757bc9b61 ("Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default")
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

x86/uaccess: instrument copy_from_user_nmi()

Make sure usercopy hooks from linux/instrumented.h are invoked for
copy_from_user_nmi(). This fixes KMSAN false positives reported when
dumping opcodes for a stack trace.

Link: https://lkml.kernel.org/r/20221102110611.1085175-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kmsan: core: kmsan_in_runtime() should return true in NMI context

Without that, every call to __msan_poison_alloca() in NMI may end up
allocating memory, which is NMI-unsafe.

Link: https://lkml.kernel.org/r/20221102110611.1085175-1-glider@google.com
Link: https://lore.kernel.org/lkml/20221025221755.3810809-1-glider@google.com/
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: hugetlb_vmemmap: include missing linux/moduleparam.h

The kernel test robot reported build failures with a 'randconfig' on s390:
>> mm/hugetlb_vmemmap.c:421:11: error: a function declaration without a
prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
core_param(hugetlb_free_vmemmap, vmemmap_optimize_enabled, bool, 0);
^

Link: https://lore.kernel.org/linux-mm/202210300751.rG3UDsuc-lkp@intel.com/
Link: https://lkml.kernel.org/r/patch.git-296b83ca939b.your-ad-here.call-01667411912-ext-5073@work.hours
Fixes: 30152245c63b ("mm: hugetlb_vmemmap: replace early_param() with core_param()")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/shmem: use page_mapping() to detect page cache for uffd continue

mfill_atomic_install_pte() checks page->mapping to detect whether one page
is used in the page cache.  However as pointed out by Matthew, the page
can logically be a tail page rather than always the head in the case of
uffd minor mode with UFFDIO_CONTINUE.  It means we could wrongly install
one pte with shmem thp tail page assuming it's an anonymous page.

It's not that clear even for anonymous page, since normally anonymous
pages also have page->mapping being setup with the anon vma.  It's safe
here only because the only such caller to mfill_atomic_install_pte() is
always passing in a newly allocated page (mcopy_atomic_pte()), whose
page->mapping is not yet setup.  However that's not extremely obvious
either.

For either of above, use page_mapping() instead.

Link: https://lkml.kernel.org/r/Y2K+y7wnhC4vbnP2@x1n
Fixes: 153132571f02 ("userfaultfd/shmem: support UFFDIO_CONTINUE for shmem")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Matthew Wilcox <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/memremap.c: map FS_DAX device memory as decrypted

virtio_pmem use devm_memremap_pages() to map the device memory. By
default this memory is mapped as encrypted with SEV. Guest reboot changes
the current encryption key and guest no longer properly decrypts the FSDAX
device meta data.

Mark the corresponding device memory region for FSDAX devices (mapped with
memremap_pages) as decrypted to retain the persistent memory property.

Link: https://lkml.kernel.org/r/20221102160728.3184016-1-pankaj.gupta@amd.com
Fixes: b7b3c01b19159 ("mm/memremap_pages: support multiple ranges per invocation")
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Partly revert "mm/thp: carry over dirty bit when thp splits on pmd"

Anatoly Pugachev reported sparc64 breakage on the patch:

https://lore.kernel.org/r/20221021160603.GA23307@u164.east.ru

The sparc64 impl of pte_mkdirty() is definitely slightly special in that
it leverages a code patching mechanism for sun4u/sun4v on relevant pgtable
entry operations.

Before having a clue of why the sparc64 is special and caused the patch to
SIGSEGV the processes, revert the patch for now. The swap path of dirty
bit inheritage is kept because that's using the swap shared code so we
assume it'll not be affected.

Link: https://lkml.kernel.org/r/Y1Wbi4yyVvDtg4zN@x1n
Fixes: 0ccf7f168e17 ("mm/thp: carry over dirty bit when thp splits on pmd")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nilfs2: fix deadlock in nilfs_count_free_blocks()

A semaphore deadlock can occur if nilfs_get_block() detects metadata
corruption while locating data blocks and a superblock writeback occurs at
the same time:

task 1                               task 2
------                               ------
* A file operation *
nilfs_truncate()
  nilfs_get_block()
    down_read(rwsem A) <--
    nilfs_bmap_lookup_contig()
      ...                            generic_shutdown_super()
                                       nilfs_put_super()
                                         * Prepare to write superblock *
                                         down_write(rwsem B) <--
                                         nilfs_cleanup_super()
      * Detect b-tree corruption *         nilfs_set_log_cursor()
      nilfs_bmap_convert_error()             nilfs_count_free_blocks()
        __nilfs_error()                        down_read(rwsem A) <--
          nilfs_set_error()
            down_write(rwsem B) <--

                           *** DEADLOCK ***

Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem)
and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata
corruption, __nilfs_error() is called from nilfs_bmap_convert_error()
inside the lock section.

Since __nilfs_error() calls nilfs_set_error() unless the filesystem is
read-only and nilfs_set_error() attempts to writelock rwsem B (=
nilfs->ns_sem) to write back superblock exclusively, hierarchical lock
acquisition occurs in the order rwsem A -> rwsem B.

Now, if another task starts updating the superblock, it may writelock
rwsem B during the lock sequence above, and can deadlock trying to
readlock rwsem A in nilfs_count_free_blocks().

However, there is actually no need to take rwsem A in
nilfs_count_free_blocks() because it, within the lock section, only reads
a single integer data on a shared struct with
nilfs_sufile_get_ncleansegs().  This has been the case after commit
aa474a220180 ("nilfs2: add local variable to cache the number of clean
segments"), that is, even before this bug was introduced.

So, this resolves the deadlock problem by just not taking the semaphore in
nilfs_count_free_blocks().

Link: https://lkml.kernel.org/r/20221029044912.9139-1-konishi.ryusuke@gmail.com
Fixes: e828949e5b42 ("nilfs2: call nilfs_error inside bmap routines")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+45d6ce7b7ad7ef455d03@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> [2.6.38+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/mmap: fix memory leak in mmap_region()

There is a memory leak reported by kmemleak:

  unreferenced object 0xffff88817231ce40 (size 224):
    comm "mount.cifs", pid 19308, jiffies 4295917571 (age 405.880s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      60 c0 b2 00 81 88 ff ff 98 83 01 42 81 88 ff ff  `..........B....
    backtrace:
      [<ffffffff81936171>] __alloc_file+0x21/0x250
      [<ffffffff81937051>] alloc_empty_file+0x41/0xf0
      [<ffffffff81937159>] alloc_file+0x59/0x710
      [<ffffffff81937964>] alloc_file_pseudo+0x154/0x210
      [<ffffffff81741dbf>] __shmem_file_setup+0xff/0x2a0
      [<ffffffff817502cd>] shmem_zero_setup+0x8d/0x160
      [<ffffffff817cc1d5>] mmap_region+0x1075/0x19d0
      [<ffffffff817cd257>] do_mmap+0x727/0x1110
      [<ffffffff817518b2>] vm_mmap_pgoff+0x112/0x1e0
      [<ffffffff83adf955>] do_syscall_64+0x35/0x80
      [<ffffffff83c0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

The root cause was traced to an error handing path in mmap_region() when
arch_validate_flags() or mas_preallocate() fails.  In the shared anonymous
mapping sence, vma will be setuped and mapped with a new shared anonymous
file via shmem_zero_setup().  So in this case, the file resource needs to
be released.

Fix it by calling fput(vma->vm_file) and unmap_region() when
arch_validate_flags() or mas_preallocate() returns an error in the shared
anonymous mapping sence.

Link: https://lkml.kernel.org/r/20221028073717.1179380-1-lizetao1@huawei.com
Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Fixes: c462ac288f2c ("mm: Introduce arch_validate_flags()")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

hugetlbfs: don't delete error page from pagecache

This change is very similar to the change that was made for shmem [1], and
it solves the same problem but for HugeTLBFS instead.

Currently, when poison is found in a HugeTLB page, the page is removed
from the page cache.  That means that attempting to map or read that
hugepage in the future will result in a new hugepage being allocated
instead of notifying the user that the page was poisoned.  As [1] states,
this is effectively memory corruption.

The fix is to leave the page in the page cache.  If the user attempts to
use a poisoned HugeTLB page with a syscall, the syscall will fail with
EIO, the same error code that shmem uses.  For attempts to map the page,
the thread will get a BUS_MCEERR_AR SIGBUS.

[1]: commit a76054266661 ("mm: shmem: don't truncate page if memory failure happens")

Link: https://lkml.kernel.org/r/20221018200125.848471-1-jthoughton@google.com
Signed-off-by: James Houghton <jthoughton@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: reorganize testing to restore module testing

Along the development cycle, the testing code support for module/in-kernel
compiles was removed.  Restore this functionality by moving any internal
API tests to the userspace side, as well as threading tests.  Fix the
lockdep issues and add a way to reduce memory usage so the tests can
complete with KASAN + memleak detection.  Make the tests work on 32 bit
hosts where possible and detect 32 bit hosts in the radix test suite.

[akpm@linux-foundation.org: fix module export]
[akpm@linux-foundation.org: fix it some more]
[liam.howlett@oracle.com: fix compile warnings on 32bit build in check_find()]
Link: https://lkml.kernel.org/r/20221107203816.1260327-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20221028180415.3074673-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: mas_anode_descend() clang-analyzer cleanup

clang-analyzer reported some Dead Stores in mas_anode_descend(). Upon
inspection, there were a few clean ups that would make the code cleaner:

The count variable was set from the mt_slots array and then updated but
never used again. Just use the array reference directly.

Also stop updating the type since it isn't used after the update.

Stop setting the gaps pointer to NULL at the start since it is always
set before the loop begins.

Link: https://lkml.kernel.org/r/20221026151413.4032730-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: remove pointer to pointer use in mas_alloc_nodes()

There is a more direct and cleaner way of implementing the same functional
code. Remove the confusing and unnecessary use of pointers here.

Link: https://lkml.kernel.org/r/20221026151241.4031117-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Linux 6.1-rc4

Merge tag 'cxl-fixes-for-6.1-rc4' of git://git./linux/kernel/git/cxl/cxl

Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.

  This is mainly fallout from the original implementation of dynamic CXL
  region creation (instantiate new physical memory pools) that arrived
  in v6.0-rc1.

  Given the theme of "failures in the presence of pass-through decoders"
  this also includes new regression test infrastructure for that case.

  Summary:

   - Fix region creation crash with pass-through decoders

   - Fix region creation crash when no decoder allocation fails

   - Fix region creation crash when scanning regions to enforce the
     increasing physical address order constraint that CXL mandates

   - Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
     1:1 memory-device-to-region associations.

   - Fix a memory leak for cxl_region objects when regions with active
     targets are deleted

   - Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
     emulated proximity domains.

   - Fix region creation failure for switch attached devices downstream
     of a single-port host-bridge

   - Fix false positive memory leak of cxl_region objects by recycling
     recently used region ids rather than freeing them

   - Add regression test infrastructure for a pass-through decoder
     configuration

   - Fix some mailbox payload handling corner cases"

* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/region: Recycle region ids
  cxl/region: Fix 'distance' calculation with passthrough ports
  tools/testing/cxl: Add a single-port host-bridge regression config
  tools/testing/cxl: Fix some error exits
  cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
  cxl/region: Fix cxl_region leak, cleanup targets at region delete
  cxl/region: Fix region HPA ordering validation
  cxl/pmem: Use size_add() against integer overflow
  cxl/region: Fix decoder allocation crash
  ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
  cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
  cxl/region: Fix null pointer dereference due to pass through decoder commit
  cxl/mbox: Add a check on input payload size

Merge tag 'hwmon-for-v6.1-rc4' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
"Fix two regressions:

   - Commit 54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into
     macro") resulted in regulator undercount when disabling regulators.
     Revert it.

   - The thermal subsystem rework caused the scmi driver to no longer
     register with the thermal subsystem because index values no longer
     match. To fix the problem, the scmi driver now directly registers
     with the thermal subsystem, no longer through the hwmon core"

* tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  Revert "hwmon: (pmbus) Add regulator supply into macro"
  hwmon: (scmi) Register explicitly with Thermal Framework

Merge tag 'perf_urgent_for_v6.1_rc4' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

- Add Cooper Lake's stepping to the PEBS guest/host events isolation
   fixed microcode revisions checking quirk

- Update Icelake and Sapphire Rapids events constraints

- Use the standard energy unit for Sapphire Rapids in RAPL

- Fix the hw_breakpoint test to fail more graciously on !SMP configs

* tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]
  perf/x86/intel: Fix pebs event constraints for SPR
  perf/x86/intel: Fix pebs event constraints for ICL
  perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain
  perf/hw_breakpoint: test: Skip the test if dependencies unmet

Merge tag 'x86_urgent_for_v6.1_rc4' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

- Add new Intel CPU models

- Enforce that TDX guests are successfully loaded only on TDX hardware
   where virtualization exception (#VE) delivery on kernel memory is
   disabled because handling those in all possible cases is "essentially
   impossible"

- Add the proper include to the syscall wrappers so that BTF can see
   the real pt_regs definition and not only the forward declaration

* tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add several Intel server CPU model numbers
  x86/tdx: Panic on bad configs that #VE on "private" memory access
  x86/tdx: Prepare for using "INFO" call for a second purpose
  x86/syscall: Include asm/ptrace.h in syscall_wrapper header

Merge tag 'kbuild-fixes-v6.1-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- Use POSIX-compatible grep options

- Document git-related tips for reproducible builds

- Fix a typo in the modpost rule

- Suppress SIGPIPE error message from gcc-ar and llvm-ar

- Fix segmentation fault in the menuconfig search

* tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix segmentation fault in menuconfig search
  kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar
  kbuild: fix typo in modpost
  Documentation: kbuild: Add description of git for reproducible builds
  kbuild: use POSIX-compatible grep option

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"ARM:

   - Fix the pKVM stage-1 walker erronously using the stage-2 accessor

   - Correctly convert vcpu->kvm to a hyp pointer when generating an
     exception in a nVHE+MTE configuration

   - Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them

   - Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE

   - Document the boot requirements for FGT when entering the kernel at
     EL1

  x86:

   - Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()

   - Make argument order consistent for kvcalloc()

   - Userspace API fixes for DEBUGCTL and LBRs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix a typo about the usage of kvcalloc()
  KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
  KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL
  KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()
  KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs
  arm64: booting: Document our requirements for fine grained traps with SME
  KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
  KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them
  KVM: arm64: Fix bad dereference on MTE-enabled systems
  KVM: arm64: Use correct accessor to parse stage-1 PTEs

Merge tag 'for-linus-6.1-rc4-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
"One fix for silencing a smatch warning, and a small cleanup patch"

* tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: simplify sysenter and syscall setup
x86/xen: silence smatch warning in pmu_msr_chk_emulated()

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
"Fix a number of bugs, including some regressions, the most serious of
  which was one which would cause online resizes to fail with file
  systems with metadata checksums enabled.

  Also fix a warning caused by the newly added fortify string checker,
  plus some bugs that were found using fuzzed file systems"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
  ext4: fix wrong return err in ext4_load_and_init_journal()
  ext4: fix warning in 'ext4_da_release_space'
  ext4: fix BUG_ON() when directory entry has invalid rec_len
  ext4: update the backup superblock's at the end of the online resize

Merge tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"One symlink handling fix and two fixes foir multichannel issues with
  iterating channels, including for oplock breaks when leases are
  disabled"

* tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix use-after-free on the link name
  cifs: avoid unnecessary iteration of tcp sessions
  cifs: always iterate smb sessions using primary channel

Merge tag 'trace-v6.1-rc3' of git://git./linux/kernel/git/trace/linux-trace

Pull `lTracing fixes for 6.1-rc3:

- Fixed NULL pointer dereference in the ring buffer wait-waiters code
   for machines that have less CPUs than what nr_cpu_ids returns.

   The buffer array is of size nr_cpu_ids, but only the online CPUs get
   initialized.

- Fixed use after free call in ftrace_shutdown.

- Fix accounting of if a kprobe is enabled

- Fix NULL pointer dereference on error path of fprobe rethook_alloc().

- Fix unregistering of fprobe_kprobe_handler

- Fix memory leak in kprobe test module

* tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
  tracing/fprobe: Fix to check whether fprobe is registered correctly
  fprobe: Check rethook_alloc() return in rethook initialization
  kprobe: reverse kp->flags when arm_kprobe failed
  ftrace: Fix use-after-free for dynamic ftrace_ops
  ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()

Merge tag 'kvmarm-fixes-6.1-3' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

* Fix the pKVM stage-1 walker erronously using the stage-2 accessor

* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration

* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them

* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE

* Document the boot requirements for FGT when entering the kernel
at EL1

Merge branch 'kvm-master' into HEAD

x86:
* Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()

* Make argument order consistent for kvcalloc()

* Userspace API fixes for DEBUGCTL and LBRs

ext4: fix fortify warning in fs/ext4/fast_commit.c:1551

With the new fortify string system, rework the memcpy to avoid this
warning:

memcpy: detected field-spanning write (size 60) of single field "&raw_inode->i_generation" at fs/ext4/fast_commit.c:1551 (size 4)

Cc: stable@kernel.org
Fixes: 54d9469bc515 ("fortify: Add run-time WARN for cross-field memcpy()")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix wrong return err in ext4_load_and_init_journal()

The return value is wrong in ext4_load_and_init_journal(). The local
variable 'err' need to be initialized before goto out. The original code
in __ext4_fill_super() is fine because it has two return values 'ret'
and 'err' and 'ret' is initialized as -EINVAL. After we factor out
ext4_load_and_init_journal(), this code is broken. So fix it by directly
returning -EINVAL in the error handler path.

Cc: stable@kernel.org
Fixes: 9c1dd22d7422 ("ext4: factor out ext4_load_and_init_journal()")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221025040206.3134773-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix warning in 'ext4_da_release_space'

Syzkaller report issue as follows:
EXT4-fs (loop0): Free/Dirty block details
EXT4-fs (loop0): free_blocks=0
EXT4-fs (loop0): dirty_blocks=0
EXT4-fs (loop0): Block reservation details
EXT4-fs (loop0): i_reserved_data_blocks=0
EXT4-fs warning (device loop0): ext4_da_release_space:1527: ext4_da_release_space: ino 18, to_free 1 with only 0 reserved data blocks
------------[ cut here ]------------
WARNING: CPU: 0 PID: 92 at fs/ext4/inode.c:1528 ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1524
Modules linked in:
CPU: 0 PID: 92 Comm: kworker/u4:4 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Workqueue: writeback wb_workfn (flush-7:0)
RIP: 0010:ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1528
RSP: 0018:ffffc900015f6c90 EFLAGS: 00010296
RAX: 42215896cd52ea00 RBX: 0000000000000000 RCX: 42215896cd52ea00
RDX: 0000000000000000 RSI: 0000000080000001 RDI: 0000000000000000
RBP: 1ffff1100e907d96 R08: ffffffff816aa79d R09: fffff520002bece5
R10: fffff520002bece5 R11: 1ffff920002bece4 R12: ffff888021fd2000
R13: ffff88807483ecb0 R14: 0000000000000001 R15: ffff88807483e740
FS:  0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555569ba628 CR3: 000000000c88e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ext4_es_remove_extent+0x1ab/0x260 fs/ext4/extents_status.c:1461
mpage_release_unused_pages+0x24d/0xef0 fs/ext4/inode.c:1589
ext4_writepages+0x12eb/0x3be0 fs/ext4/inode.c:2852
do_writepages+0x3c3/0x680 mm/page-writeback.c:2469
__writeback_single_inode+0xd1/0x670 fs/fs-writeback.c:1587
writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1870
wb_writeback+0x41f/0x7b0 fs/fs-writeback.c:2044
wb_do_writeback fs/fs-writeback.c:2187 [inline]
wb_workfn+0x3cb/0xef0 fs/fs-writeback.c:2227
process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
kthread+0x266/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>

Above issue may happens as follows:
ext4_da_write_begin
  ext4_create_inline_data
    ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS);
    ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA);
__ext4_ioctl
  ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag
ext4_da_write_begin
  ext4_da_convert_inline_data_to_extent
    ext4_da_write_inline_data_begin
      ext4_da_map_blocks
        ext4_insert_delayed_block
  if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk))
    if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk))
      ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1
       allocated = true;
          ext4_es_insert_delayed_block(inode, lblk, allocated);
ext4_writepages
  mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC
  mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1
    ext4_es_remove_extent
      ext4_da_release_space(inode, reserved);
        if (unlikely(to_free > ei->i_reserved_data_blocks))
  -> to_free == 1  but ei->i_reserved_data_blocks == 0
  -> then trigger warning as above

To solve above issue, forbid inode do migrate which has inline data.

Cc: stable@kernel.org
Reported-by: syzbot+c740bb18df70ad00952e@syzkaller.appspotmail.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221018022701.683489-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix BUG_ON() when directory entry has invalid rec_len

The rec_len field in the directory entry has to be a multiple of 4.  A
corrupted filesystem image can be used to hit a BUG() in
ext4_rec_len_to_disk(), called from make_indexed_dir().

------------[ cut here ]------------
kernel BUG at fs/ext4/ext4.h:2413!
...
RIP: 0010:make_indexed_dir+0x53f/0x5f0
...
Call Trace:
  <TASK>
  ? add_dirent_to_buf+0x1b2/0x200
  ext4_add_entry+0x36e/0x480
  ext4_add_nondir+0x2b/0xc0
  ext4_create+0x163/0x200
  path_openat+0x635/0xe90
  do_filp_open+0xb4/0x160
  ? __create_object.isra.0+0x1de/0x3b0
  ? _raw_spin_unlock+0x12/0x30
  do_sys_openat2+0x91/0x150
  __x64_sys_open+0x6c/0xa0
  do_syscall_64+0x3c/0x80
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

The fix simply adds a call to ext4_check_dir_entry() to validate the
directory entry, returning -EFSCORRUPTED if the entry is invalid.

CC: stable@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216540
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20221012131330.32456-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Merge tag 'acpi-6.1-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
"Add StorageD3Enable quirk for Dell Inspiron 16 5625 (Mario
Limonciello)"

* tag 'acpi-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: Add another system to quirk list for forcing StorageD3Enable

Merge branch 'acpi-x86'

* acpi-x86:
ACPI: x86: Add another system to quirk list for forcing StorageD3Enable

Merge tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- Fixes for the ublk driver (Ming)

- Fixes for error handling memory leaks (Chen Jun, Chen Zhongjin)

- Explicitly clear the last request in a chain when the plug is
   flushed, as it may have already been issued (Al)

* tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux:
  block: blk_add_rq_to_plug(): clear stale 'last' after flush
  blk-mq: Fix kmemleak in blk_mq_init_allocated_queue
  block: Fix possible memory leak for rq_wb on add_disk failure
  ublk_drv: add ublk_queue_cmd() for cleanup
  ublk_drv: avoid to touch io_uring cmd in blk_mq io path
  ublk_drv: comment on ublk_driver entry of Kconfig
  ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module

cifs: fix use-after-free on the link name

xfstests generic/011 reported use-after-free bug as follows:

  BUG: KASAN: use-after-free in __d_alloc+0x269/0x859
  Read of size 15 at addr ffff8880078933a0 by task dirstress/952

  CPU: 1 PID: 952 Comm: dirstress Not tainted 6.1.0-rc3+ #77
  Call Trace:
   __dump_stack+0x23/0x29
   dump_stack_lvl+0x51/0x73
   print_address_description+0x67/0x27f
   print_report+0x3e/0x5c
   kasan_report+0x7b/0xa8
   kasan_check_range+0x1b2/0x1c1
   memcpy+0x22/0x5d
   __d_alloc+0x269/0x859
   d_alloc+0x45/0x20c
   d_alloc_parallel+0xb2/0x8b2
   lookup_open+0x3b8/0x9f9
   open_last_lookups+0x63d/0xc26
   path_openat+0x11a/0x261
   do_filp_open+0xcc/0x168
   do_sys_openat2+0x13b/0x3f7
   do_sys_open+0x10f/0x146
   __se_sys_creat+0x27/0x2e
   __x64_sys_creat+0x55/0x6a
   do_syscall_64+0x40/0x96
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  Allocated by task 952:
   kasan_save_stack+0x1f/0x42
   kasan_set_track+0x21/0x2a
   kasan_save_alloc_info+0x17/0x1d
   __kasan_kmalloc+0x7e/0x87
   __kmalloc_node_track_caller+0x59/0x155
   kstrndup+0x60/0xe6
   parse_mf_symlink+0x215/0x30b
   check_mf_symlink+0x260/0x36a
   cifs_get_inode_info+0x14e1/0x1690
   cifs_revalidate_dentry_attr+0x70d/0x964
   cifs_revalidate_dentry+0x36/0x62
   cifs_d_revalidate+0x162/0x446
   lookup_open+0x36f/0x9f9
   open_last_lookups+0x63d/0xc26
   path_openat+0x11a/0x261
   do_filp_open+0xcc/0x168
   do_sys_openat2+0x13b/0x3f7
   do_sys_open+0x10f/0x146
   __se_sys_creat+0x27/0x2e
   __x64_sys_creat+0x55/0x6a
   do_syscall_64+0x40/0x96
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

  Freed by task 950:
   kasan_save_stack+0x1f/0x42
   kasan_set_track+0x21/0x2a
   kasan_save_free_info+0x1c/0x34
   ____kasan_slab_free+0x1c1/0x1d5
   __kasan_slab_free+0xe/0x13
   __kmem_cache_free+0x29a/0x387
   kfree+0xd3/0x10e
   cifs_fattr_to_inode+0xb6a/0xc8c
   cifs_get_inode_info+0x3cb/0x1690
   cifs_revalidate_dentry_attr+0x70d/0x964
   cifs_revalidate_dentry+0x36/0x62
   cifs_d_revalidate+0x162/0x446
   lookup_open+0x36f/0x9f9
   open_last_lookups+0x63d/0xc26
   path_openat+0x11a/0x261
   do_filp_open+0xcc/0x168
   do_sys_openat2+0x13b/0x3f7
   do_sys_open+0x10f/0x146
   __se_sys_creat+0x27/0x2e
   __x64_sys_creat+0x55/0x6a
   do_syscall_64+0x40/0x96
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

When opened a symlink, link name is from 'inode->i_link', but it may be
reset to a new value when revalidate the dentry. If some processes get the
link name on the race scenario, then UAF will happen on link name.

Fix this by implementing 'get_link' interface to duplicate the link name.

Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: avoid unnecessary iteration of tcp sessions

In a few places, we do unnecessary iterations of
tcp sessions, even when the server struct is provided.

The change avoids it and uses the server struct provided.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: always iterate smb sessions using primary channel

smb sessions and tcons currently hang off primary channel only.
Secondary channels have the lists as empty. Whenever there's a
need to iterate sessions or tcons, we should use the list in the
corresponding primary channel.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Avoid kprobe recursion when cortex_a76_erratum_1463225_debug_handler()
   is not inlined (change to __always_inline).

- Fix the visibility of compat hwcaps, broken by recent changes to
   consolidate the visibility of hwcaps and the user-space view of the
   ID registers.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: cpufeature: Fix the visibility of compat hwcaps
  arm64: entry: avoid kprobe recursion

Merge tag 'i2c-for-6.1-rc4' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"A documentation fix and driver fixes for piix4, tegra, and i801"

* tag 'i2c-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Documentation: devres: add missing I2C helper
  i2c: i801: add lis3lv02d's I2C address for Vostro 5568
  i2c: tegra: Allocate DMA memory for DMA engine
  i2c: piix4: Fix adapter not be removed in piix4_remove()

Revert "hwmon: (pmbus) Add regulator supply into macro"

This reverts commit 54cc3dbfc10dc3db7cb1cf49aee4477a8398fbde.

Zev Weiss reports that the reverted patch may cause a regulator
undercount. Here is his report:

... having regulator-dummy set as a supply on my PMBus regulators
(instead of having them as their own top-level regulators without
an upstream supply) leads to enable-count underflow errors when
disabling them:

    # echo 0 > /sys/bus/platform/devices/efuse01/state
    [  906.094477] regulator-dummy: Underflow of regulator enable count
    [  906.100563] Failed to disable vout: -EINVAL
    [  136.992676] reg-userspace-consumer efuse01: Failed to configure state: -22

Zev reports that reverting the patch fixes the problem. So let's do that
for now.

Fixes: 54cc3dbfc10d ("hwmon: (pmbus) Add regulator supply into macro")
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Reported-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (scmi) Register explicitly with Thermal Framework

Available sensors are enumerated and reported by the SCMI platform server
using a 16bit identification number; not all such sensors are of a type
supported by hwmon subsystem and, among the supported ones, only a subset
could be temperature sensors that have to be registered with the Thermal
Framework.
Potential clashes between hwmon channels indexes and the underlying real
sensors IDs do not play well with the hwmon<-->thermal bridge automatic
registration routines and could need a sensible number of fake dummy
sensors to be made up in order to keep indexes and IDs in sync.

Avoid to use the hwmon<-->thermal bridge dropping the HWMON_C_REGISTER_TZ
attribute and instead explicit register temperature sensors directly with
the Thermal Framework.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221031114018.59048-1-cristian.marussi@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

cxl/region: Recycle region ids

At region creation time the next region-id is atomically cached so that
there is predictability of region device names. If that region is
destroyed and then a new one is created the region id increments. That
ends up looking like a memory leak, or is otherwise surprising that
identifiers roll forward even after destroying all previously created
regions.

Try to reuse rather than free old region ids at region release time.

While this fixes a cosmetic issue, the needlessly advancing memory
region-id gives the appearance of a memory leak, hence the "Fixes" tag,
but no "Cc: stable" tag.

Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 779dd20cfb56 ("cxl/region: Add region creation support")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752186062.947915.13200195701224993317.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

cxl/region: Fix 'distance' calculation with passthrough ports

When programming port decode targets, the algorithm wants to ensure that
two devices are compatible to be programmed as peers beneath a given
port. A compatible peer is a target that shares the same dport, and
where that target's interleave position also routes it to the same
dport. Compatibility is determined by the device's interleave position
being >= to distance. For example, if a given dport can only map every
Nth position then positions less than N away from the last target
programmed are incompatible.

The @distance for the host-bridge's cxl_port in a simple dual-ported
host-bridge configuration with 2 direct-attached devices is 1, i.e. An
x2 region divided by 2 dports to reach 2 region targets.

An x4 region under an x2 host-bridge would need 2 intervening switches
where the @distance at the host bridge level is 2 (x4 region divided by
2 switches to reach 4 devices).

However, the distance between peers underneath a single ported
host-bridge is always zero because there is no limit to the number of
devices that can be mapped. In other words, there are no decoders to
program in a passthrough, all descendants are mapped and distance only
starts matters for the intervening descendant ports of the passthrough
port.

Add tracking for the number of dports mapped to a port, and use that to
detect the passthrough case for calculating @distance.

Cc: <stable@vger.kernel.org>
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Fixes: 27b3f8d13830 ("cxl/region: Program target lists")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752185440.947915.6617495912508299445.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

tools/testing/cxl: Add a single-port host-bridge regression config

Jonathan reports that region creation fails when a single-port
host-bridge connects to a multi-port switch. Mock up that configuration
so a fix can be tested and regression tested going forward.

Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752184838.947915.2167957540894293891.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

tools/testing/cxl: Fix some error exits

Fix a few typos where 'goto err_port' was used rather than the object
specific cleanup.

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752184255.947915.16163477849330181425.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak

When a cxl_nvdimm object goes through a ->remove() event (device
physically removed, nvdimm-bridge disabled, or nvdimm device disabled),
then any associated regions must also be disabled. As highlighted by the
cxl-create-region.sh test [1], a single device may host multiple
regions, but the driver was only tracking one region at a time. This
leads to a situation where only the last enabled region per nvdimm
device is cleaned up properly. Other regions are leaked, and this also
causes cxl_memdev reference leaks.

Fix the tracking by allowing cxl_nvdimm objects to track multiple region
associations.

Cc: <stable@vger.kernel.org>
Link: https://github.com/pmem/ndctl/blob/main/test/cxl-create-region.sh
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Fixes: 04ad63f086d1 ("cxl/region: Introduce cxl_pmem_region objects")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752183647.947915.2045230911503793901.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

cxl/region: Fix cxl_region leak, cleanup targets at region delete

When a region is deleted any targets that have been previously assigned
to that region hold references to it. Trigger those references to
drop by detaching all targets at unregister_region() time.

Otherwise that region object will leak as userspace has lost the ability
to detach targets once region sysfs is torn down.

Cc: <stable@vger.kernel.org>
Fixes: b9686e8c8e39 ("cxl/region: Enable the assignment of endpoint decoders to regions")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752183055.947915.17681995648556534844.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

cxl/region: Fix region HPA ordering validation

Some regions may not have any address space allocated. Skip them when
validating HPA order otherwise a crash like the following may result:

devm_cxl_add_region: cxl_acpi cxl_acpi.0: decoder3.4: created region9
BUG: kernel NULL pointer dereference, address: 0000000000000000
[..]
RIP: 0010:store_targetN+0x655/0x1740 [cxl_core]
[..]
Call Trace:
  <TASK>
  kernfs_fop_write_iter+0x144/0x200
  vfs_write+0x24a/0x4d0
  ksys_write+0x69/0xf0
  do_syscall_64+0x3a/0x90

store_targetN+0x655/0x1740:
alloc_region_ref at drivers/cxl/core/region.c:676
(inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850
(inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290
(inlined by) attach_target at drivers/cxl/core/region.c:1410
(inlined by) store_targetN at drivers/cxl/core/region.c:1453

Cc: <stable@vger.kernel.org>
Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166752182461.947915.497032805239915067.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Merge tag 'xfs-6.1-fixes-4' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"Dave and I had thought that this would be a very quiet cycle, but we
  thought wrong.

  At first there were the usual trickle of minor bugfixes, but then
  Zorro pulled -rc1 and noticed complaints about the stronger memcpy
  checks w.r.t. flex arrays.

  Analyzing how to fix that revealed a bunch of validation gaps in
  validating ondisk log items during recovery, and then a customer hit
  an infinite loop in the refcounting code on a corrupt filesystem.

  So. This largeish batch of fixes addresses all those problems, I hope.

  Summary:

   - Fix a UAF bug during log recovery

   - Fix memory leaks when mount fails

   - Detect corrupt bestfree information in a directory block

   - Fix incorrect return value type for the dax page fault handlers

   - Fix fortify complaints about memcpy of xfs log item objects

   - Strengthen inadequate validation of recovered log items

   - Fix incorrectly declared flex array in EFI log item structs

   - Log corrupt log items for debugging purposes

   - Fix infinite loop problems in the refcount code if the refcount
     btree node block keys are corrupt

   - Fix infinite loop problems in the refcount code if the refcount
     btree records suffer MSB bitflips

   - Add more sanity checking to continued defer ops to prevent
     overflows from one AG to the next or off EOFS"

* tag 'xfs-6.1-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
  xfs: rename XFS_REFC_COW_START to _COWFLAG
  xfs: fix uninitialized list head in struct xfs_refcount_recovery
  xfs: fix agblocks check in the cow leftover recovery function
  xfs: check record domain when accessing refcount records
  xfs: remove XFS_FIND_RCEXT_SHARED and _COW
  xfs: refactor domain and refcount checking
  xfs: report refcount domain in tracepoints
  xfs: track cow/shared record domains explicitly in xfs_refcount_irec
  xfs: refactor refcount record usage in xchk_refcountbt_rec
  xfs: dump corrupt recovered log intent items to dmesg consistently
  xfs: move _irec structs to xfs_types.h
  xfs: actually abort log recovery on corrupt intent-done log items
  xfs: check deferred refcount op continuation parameters
  xfs: refactor all the EFI/EFD log item sizeof logic
  xfs: create a predicate to verify per-AG extents
  xfs: fix memcpy fortify errors in EFI log format copying
  xfs: make sure aglen never goes negative in xfs_refcount_adjust_extents
  xfs: fix memcpy fortify errors in RUI log format copying
  xfs: fix memcpy fortify errors in CUI log format copying
  xfs: fix memcpy fortify errors in BUI log format copying
  ...

Merge tag 'landlock-6.1-rc4' of git://git./linux/kernel/git/mic/linux

Pull landlock fix from Mickaël Salaün:
"Fix the test build for some distros"

* tag 'landlock-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Build without static libraries

Merge tag 'hardening-v6.1-rc4' of git://git./linux/kernel/git/kees/linux

Pull hardening fix from Kees Cook:

- Correctly report struct member size on memcpy overflow (Kees Cook)

* tag 'hardening-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Capture __bos() results in const temp vars

Merge tag 'efi-fixes-for-v6.1-2' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

- A pair of tweaks to the EFI random seed code so that externally
   provided version of this config table are handled more robustly

- Another fix for the v6.0 EFI variable refactor that turned out to
   break Apple machines which don't provide QueryVariableInfo()

- Add some guard rails to the EFI runtime service call wrapper so we
   can recover from synchronous exceptions caused by firmware

* tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  arm64: efi: Recover from synchronous exceptions occurring in firmware
  efi: efivars: Fix variable writes with unsupported query_variable_store()
  efi: random: Use 'ACPI reclaim' memory for random seed
  efi: random: reduce seed size to 32 bytes
  efi/tpm: Pass correct address to memblock_reserve

Merge tag 'soc-fixes-6.1-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"There are not a lot of important fixes for the soc tree yet this time,
  but it's time to upstream what I got so far:

   - DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
     temperature points

   - A number of fixes for the Arm SCMI firmware, addressing correctness
     issues in the code, in particular error handling and resource
     leaks.

   - One error handling fix for the new i.MX93 power domain driver

   - Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
     fixing incorrect or missing DT properties for MDIO controller
     nodes, CPLD, USB and regulators for various boards, as well as some
     fixes for DT schema checks.

   - MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git
     URLs"

* tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
  arm64: dts: juno: Add thermal critical trip points
  firmware: arm_scmi: Fix deferred_tx_wq release on error paths
  firmware: arm_scmi: Fix devres allocation device in virtio transport
  firmware: arm_scmi: Make Rx chan_setup fail on memory errors
  firmware: arm_scmi: Make tx_prepare time out eventually
  firmware: arm_scmi: Suppress the driver's bind attributes
  firmware: arm_scmi: Cleanup the core driver removal callback
  MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer
  ARM: dts: ux500: Add trips to battery thermal zones
  arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
  arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
  arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
  soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
  arm64: dts: imx93: correct gpio-ranges
  arm64: dts: imx93: correct s4mu interrupt names
  dt-bindings: power: gpcv2: add power-domains property
  arm64: dts: imx8: correct clock order
  ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
  ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
  arm64: dts: imx8mn: Correct the usb power domain
  ...

x86/cpu: Add several Intel server CPU model numbers

These servers are all on the public versions of the roadmap. The model
numbers for Grand Ridge, Granite Rapids, and Sierra Forest were included
in the September 2022 edition of the Instruction Set Extensions document.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20221103203310.5058-1-tony.luck@intel.com

Merge tag 'drm-fixes-2022-11-04-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"This is the weekly fixes for rc4. Misc fixes across rockchip, imx,
  amdgpu and i915.

  The biggest change is for amdkfd where the trap handler needs an
  updated fw from a header which makes it a bit larger. I hadn't noticed
  this particular file before so I'm going to figure out what the magic
  is for, but the fix should be fine for now.

  amdgpu:
   - DCN 3.1.4 fixes
   - DCN 3.2.x fixes
   - GC 11.x fixes
   - Virtual display fix
   - Fail suspend if resources can't be evicted
   - SR-IOV fix
   - Display PSR fix

  amdkfd:
   - Fix possible NULL pointer deref
   - GC 11.x trap handler fix

  i915:
   - Add locking around DKL PHY register accesses
   - Stop abusing swiotlb_max_segment
   - Filter out invalid outputs more sensibly
   - Setup DDC fully before output init
   - Simplify intel_panel_add_edid_alt_fixed_modes()
   - Grab mode_config.mutex during LVDS init to avoid WARNs

  rockchip:
   - fix probing issues
   - fix framebuffer without iommu
   - fix vop selection
   - fix NULL ptr access

  imx:
   - Fix Kconfig
   - fix mode_valid function"

* tag 'drm-fixes-2022-11-04-1' of git://anongit.freedesktop.org/drm/drm: (35 commits)
  drm/amdkfd: update GFX11 CWSR trap handler
  drm/amd/display: Investigate tool reported FCLK P-state deviations
  drm/amd/display: Add DSC delay factor workaround
  drm/amd/display: Round up DST_after_scaler to nearest int
  drm/amd/display: Use forced DSC bpp in DML
  drm/amd/display: Fix DCN32 DSC delay calculation
  drm/amdgpu: Disable GPU reset on SRIOV before remove pci.
  drm/amdgpu: disable GFXOFF during compute for GFX11
  drm/amd: Fail the suspend if resources can't be evicted
  drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
  drm/amdgpu: correct MES debugfs versions
  drm/amdgpu: set fb_modifiers_not_supported in vkms
  drm/amd/display: cursor update command incomplete
  drm/amd/display: Enable timing sync on DCN32
  drm/amd/display: Set memclk levels to be at least 1 for dcn32
  drm/amd/display: Update latencies on DCN321
  drm/amd/display: Limit dcn32 to 1950Mhz display clock
  drm/amd/display: Ignore Cable ID Feature
  drm/amd/display: Update DSC capabilitie for DCN314
  drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_valid
  ...

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Fixes in clk drivers and some clk rate range fixes in the core as
  well:

   - Make sure the struct clk_rate_request is more sane

   - Remove a WARN_ON that was triggering for clks with no parents that
     can change frequency

   - Fix bad i2c bus transactions on Renesas rs9

   - Actually return an error in clk_mt8195_topck_probe() on an error
     path

   - Keep the GPU memories powered while the clk isn't enabled on
     Qualcomm's sc7280 SoC

   - Fix the parent clk for HSCIF modules on Renesas' R-Car V4H SoC"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: Update the force mem core bit for GPU clocks
  clk: Initialize max_rate in struct clk_rate_request
  clk: Initialize the clk_rate_request even if clk_core is NULL
  clk: Remove WARN_ON NULL parent in clk_core_init_rate_req()
  clk: renesas: r8a779g0: Fix HSCIF parent clocks
  clk: renesas: r8a779g0: Add SASYNCPER clocks
  clk: mediatek: clk-mt8195-topckgen: Fix error return code in clk_mt8195_topck_probe()
  clk: sifive: select by default if SOC_SIFIVE
  clk: rs9: Fix I2C accessors

tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()

test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak
when there is no failure. Move kfree(buf) from fail path to common path
to prevent the memleak. The same reason and solution in
test_gen_kretprobe_cmd().

unreferenced object 0xffff888143b14000 (size 2048):
  comm "insmod", pid 52490, jiffies 4301890980 (age 40.553s)
  hex dump (first 32 bytes):
    70 3a 6b 70 72 6f 62 65 73 2f 67 65 6e 5f 6b 70  p:kprobes/gen_kp
    72 6f 62 65 5f 74 65 73 74 20 64 6f 5f 73 79 73  robe_test do_sys
  backtrace:
    [<000000006d7b836b>] kmalloc_trace+0x27/0xa0
    [<0000000009528b5b>] 0xffffffffa059006f
    [<000000008408b580>] do_one_initcall+0x87/0x2a0
    [<00000000c4980a7e>] do_init_module+0xdf/0x320
    [<00000000d775aad0>] load_module+0x3006/0x3390
    [<00000000e9a74b80>] __do_sys_finit_module+0x113/0x1b0
    [<000000003726480d>] do_syscall_64+0x35/0x80
    [<000000003441e93b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Link: https://lore.kernel.org/all/20221102072954.26555-1-shangxiaojing@huawei.com/
Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module")
Cc: stable@vger.kernel.org
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

tracing/fprobe: Fix to check whether fprobe is registered correctly

Since commit ab51e15d535e ("fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag
for fprobe") introduced fprobe_kprobe_handler() for fprobe::ops::func,
unregister_fprobe() fails to unregister the registered if user specifies
FPROBE_FL_KPROBE_SHARED flag.
Moreover, __register_ftrace_function() is possible to change the
ftrace_ops::func, thus we have to check fprobe::ops::saved_func instead.

To check it correctly, it should confirm the fprobe::ops::saved_func is
either fprobe_handler() or fprobe_kprobe_handler().

Link: https://lore.kernel.org/all/166677683946.1459107.15997653945538644683.stgit@devnote3/
Fixes: cad9931f64dc ("fprobe: Add ftrace based probe APIs")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

fprobe: Check rethook_alloc() return in rethook initialization

Check if fp->rethook succeeded to be allocated. Otherwise, if
rethook_alloc() fails, then we end up dereferencing a NULL pointer in
rethook_add_node().

Link: https://lore.kernel.org/all/20221025031209.954836-1-rafaelmendsr@gmail.com/
Fixes: 5b0ab78998e3 ("fprobe: Add exit_handler support")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

kprobe: reverse kp->flags when arm_kprobe failed

In aggregate kprobe case, when arm_kprobe failed,
we need set the kp->flags with KPROBE_FLAG_DISABLED again.
If not, the 'kp' kprobe will been considered as enabled
but it actually not enabled.

Link: https://lore.kernel.org/all/20220902155820.34755-1-liq3ea@163.com/
Fixes: 12310e343755 ("kprobes: Propagate error from arm_kprobe_ftrace()")
Cc: stable@vger.kernel.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Merge tag 'ata-6.1-rc4' of git://git./linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:
"Two driver fixes:

   - Fix the PIO mode configuration of the pdc20230 (pata_legacy)
     driver. This also removes a compilation warning with clang and W=1
     (Sergey)

   - Fix devm_platform_ioremap_resource() return value check in the
     palmld driver (Yang)"

* tag 'ata-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: palmld: fix return value check in palmld_pata_probe()
  ata: pata_legacy: fix pdc20230_set_piomode()

Merge tag 'drm-intel-fixes-2022-11-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Add locking around DKL PHY register accesses (Imre Deak)
- Stop abusing swiotlb_max_segment (Robert Beckett)
- Filter out invalid outputs more sensibly (Ville Syrjälä)
- Setup DDC fully before output init (Ville Syrjälä)
- Simplify intel_panel_add_edid_alt_fixed_modes() (Ville Syrjälä)
- Grab mode_config.mutex during LVDS init to avoid WARNs (Ville Syrjälä)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y2ODlCGM4nACmzsJ@tursulin-desk

Merge tag 'amd-drm-fixes-6.1-2022-11-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.1-2022-11-02:

amdgpu:
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- GC 11.x fixes
- Virtual display fix
- Fail suspend if resources can't be evicted
- SR-IOV fix
- Display PSR fix

amdkfd:
- Fix possible NULL pointer deref
- GC 11.x trap handler fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103023257.10446-1-alexander.deucher@amd.com

Merge tag 'fuse-fixes-6.1-rc4' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse fixes from Miklos Szeredi:
"Fix two rarely triggered but long-standing issues"

* tag 'fuse-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: add file_modified() to fallocate
fuse: fix readdir cache race

cxl/pmem: Use size_add() against integer overflow

"struct_size() + n" may cause a integer overflow,
use size_add() to handle it.

Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20220927070247.23148-1-yuzhe@nfschina.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Merge tag 'for-6.1-rc3-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A batch of error handling fixes for resource leaks, fixes for nowait
  mode in combination with direct and buffered IO:

   - direct IO + dsync + nowait could miss a sync of the file after
     write, add handling for this combination

   - buffered IO + nowait should not fail with ENOSPC, only blocking IO
     could determine that

   - error handling fixes:
      - fix inode reserve space leak due to nowait buffered write
      - check the correct variable after allocation (direct IO submit)
      - fix inode list leak during backref walking
      - fix ulist freeing in self tests"

* tag 'for-6.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix inode reserve space leak due to nowait buffered write
  btrfs: fix nowait buffered write returning -ENOSPC
  btrfs: remove pointless and double ulist frees in error paths of qgroup tests
  btrfs: fix ulist leaks in error paths of qgroup self tests
  btrfs: fix inode list leak during backref walking at find_parent_nodes()
  btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
  btrfs: fix lost file sync on direct IO write with nowait and dsync iocb
  btrfs: fix a memory allocation failure test in btrfs_submit_direct

arm64: cpufeature: Fix the visibility of compat hwcaps

Commit 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the
sysreg visible to user-space") forced the hwcaps to use sanitised
user-space view of the id registers. However, the ID register structures
used to select few compat cpufeatures (vfp, crc32, ...) are masked and
hence such hwcaps do not appear in /proc/cpuinfo anymore for PER_LINUX32
personality.

Add the ID register structures explicitly and set the relevant entry as
visible. As these ID registers are now of type visible so make them
available in 64-bit userspace by making necessary changes in register
emulation logic and documentation.

While at it, update the comment for structure ftr_generic_32bits[] which
lists the ID register that use it.

Fixes: 237405ebef58 ("arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space")
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20221103082232.19189-1-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'linux-kselftest-fixes-6.1-rc4' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
"Fixes to the pidfd test"

* tag 'linux-kselftest-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/pidfd_test: Remove the erroneous ','
  selftests: pidfd: Fix compling warnings
  ksefltests: pidfd: Fix wait_states: Test terminated by timeout

Merge tag 'net-6.1-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and netfilter.

  Current release - regressions:

   - net: several zerocopy flags fixes

   - netfilter: fix possible memory leak in nf_nat_init()

   - openvswitch: add missing .resv_start_op

  Previous releases - regressions:

   - neigh: fix null-ptr-deref in neigh_table_clear()

   - sched: fix use after free in red_enqueue()

   - dsa: fall back to default tagger if we can't load the one from DT

   - bluetooth: fix use-after-free in l2cap_conn_del()

  Previous releases - always broken:

   - netfilter: netlink notifier might race to release objects

   - nfc: fix potential memory leak of skb

   - bluetooth: fix use-after-free caused by l2cap_reassemble_sdu

   - bluetooth: use skb_put to set length

   - eth: tun: fix bugs for oversize packet when napi frags enabled

   - eth: lan966x: fixes for when MTU is changed

   - eth: dwmac-loongson: fix invalid mdio_node"

* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
  vsock: fix possible infinite sleep in vsock_connectible_wait_data()
  vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
  ipv6: fix WARNING in ip6_route_net_exit_late()
  bridge: Fix flushing of dynamic FDB entries
  net, neigh: Fix null-ptr-deref in neigh_table_clear()
  net/smc: Fix possible leaked pernet namespace in smc_init()
  stmmac: dwmac-loongson: fix invalid mdio_node
  ibmvnic: Free rwi on reset success
  net: mdio: fix undefined behavior in bit shift for __mdiobus_register
  Bluetooth: L2CAP: Fix attempting to access uninitialized memory
  Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
  Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
  Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
  Bluetooth: L2CAP: Fix memory leak in vhci_write
  Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
  Bluetooth: virtio_bt: Use skb_put to set length
  Bluetooth: hci_conn: Fix CIS connection dst_type handling
  Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
  netfilter: ipset: enforce documented limit to prevent allocating huge memory
  isdn: mISDN: netjet: fix wrong check of device registration
  ...

Merge tag 'powerpc-6.1-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix an endian thinko in the asm-generic compat_arg_u64() which led to
   syscall arguments being swapped for some compat syscalls.

- Fix syscall wrapper handling of syscalls with 64-bit arguments on
   32-bit kernels, which led to syscall arguments being misplaced.

- A build fix for amdgpu on Book3E with AltiVec disabled.

Thanks to Andreas Schwab, Christian Zigotzky, and Arnd Bergmann.

* tag 'powerpc-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32: Select ARCH_SPLIT_ARG64
  powerpc/32: fix syscall wrappers with 64-bit arguments
  asm-generic: compat: fix compat_arg_u64() and compat_arg_u64_dual()
  powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec

arm64: efi: Recover from synchronous exceptions occurring in firmware

Unlike x86, which has machinery to deal with page faults that occur
during the execution of EFI runtime services, arm64 has nothing like
that, and a synchronous exception raised by firmware code brings down
the whole system.

With more EFI based systems appearing that were not built to run Linux
(such as the Windows-on-ARM laptops based on Qualcomm SOCs), as well as
the introduction of PRM (platform specific firmware routines that are
callable just like EFI runtime services), we are more likely to run into
issues of this sort, and it is much more likely that we can identify and
work around such issues if they don't bring down the system entirely.

Since we already use a EFI runtime services call wrapper in assembler,
we can quite easily add some code that captures the execution state at
the point where the call is made, allowing us to revert to this state
and proceed execution if the call triggered a synchronous exception.

Given that the kernel and the firmware don't share any data structures
that could end up in an indeterminate state, we can happily continue
running, as long as we mark the EFI runtime services as unavailable from
that point on.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>