Linus Torvalds [Fri, 8 Jan 2021 20:05:11 +0000 (12:05 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a functional bug in arm/chacha-neon as well as a potential
buffer overflow in ecdh"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ecdh - avoid buffer overflow in ecdh_set_secret()
crypto: arm/chacha-neon - add missing counter increment
Linus Torvalds [Thu, 7 Jan 2021 17:43:54 +0000 (09:43 -0800)]
poll: fix performance regression due to out-of-line __put_user()
The kernel test robot reported a -5.8% performance regression on the
"poll2" test of will-it-scale, and bisected it to commit
d55564cfc222
("x86: Make __put_user() generate an out-of-line call").
I didn't expect an out-of-line __put_user() to matter, because no normal
core code should use that non-checking legacy version of user access any
more. But I had overlooked the very odd poll() usage, which does a
__put_user() to update the 'revents' values of the poll array.
Now, Al Viro correctly points out that instead of updating just the
'revents' field, it would be much simpler to just copy the _whole_
pollfd entry, and then we could just use "copy_to_user()" on the whole
array of entries, the same way we use "copy_from_user()" a few lines
earlier to get the original values.
But that is not what we've traditionally done, and I worry that threaded
applications might be concurrently modifying the other fields of the
pollfd array. So while Al's suggestion is simpler - and perhaps worth
trying in the future - this instead keeps the "just update revents"
model.
To fix the performance regression, use the modern "unsafe_put_user()"
instead of __put_user(), with the proper "user_write_access_begin()"
guarding in place. This improves code generation enormously.
Link: https://lore.kernel.org/lkml/20210107134723.GA28532@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Laight <David.Laight@aculab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Mladek [Fri, 8 Jan 2021 11:48:47 +0000 (12:48 +0100)]
Revert "init/console: Use ttynull as a fallback when there is no console"
This reverts commit
757055ae8dedf5333af17b3b5b4b70ba9bc9da4e.
The commit caused that ttynull was used as the default console
on several systems[1][2][3]. As a result, the console was
blank even when a better alternative existed.
It happened when there was no console configured
on the command line and ttynull_init() was the first initcall
calling register_console().
Or it happened when /dev/ did not exist when console_on_rootfs()
was called. It was not able to open /dev/console even though
a console driver was registered. It tried to add ttynull console
but it obviously did not help. But ttynull became the preferred
console and was used by /dev/console when it was available later.
The commit tried to fix a historical problem that have been there
for ages. The primary motivation was the commit
3cffa06aeef7ece30f6
("printk/console: Allow to disable console output by using console=""
or console=null"). It provided a clean solution for a workaround
that was widely used and worked only by chance.
This revert causes that the console="" or console=null command line
options will again work only by chance. These options will cause that
a particular console will be preferred and the default (tty) ones
will not get enabled. There will be no console registered at
all. As a result there won't be stdin, stdout, and stderr for
the init process. But it worked exactly this way even before.
The proper solution has to fulfill many conditions:
+ Register ttynull only when explicitly required or as
the ultimate fallback.
+ ttynull should get associated with /dev/console but it must
not become preferred console when used as a fallback.
Especially, it must still be possible to replace it
by a better console later.
Such a change requires clean up of the register_console() code.
Otherwise, it would be even harder to follow. Especially, the use
of has_preferred_console and CON_CONSDEV flag is tricky. The clean
up is risky. The ordering of consoles is not well defined. And
any changes tend to break existing user settings.
Do the revert at the least risky solution for now.
[1] https://lore.kernel.org/linux-kselftest/
20201221144302.GR4077@smile.fi.intel.com/
[2] https://lore.kernel.org/lkml/
d2a3b3c0-e548-7dd1-730f-
59bc5c04e191@synopsys.com/
[3] https://patchwork.ozlabs.org/project/linux-um/patch/
20210105120128.10854-1-thomas@m3y3r.de/
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Vineet Gupta <vgupta@synopsys.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 8 Jan 2021 00:03:19 +0000 (16:03 -0800)]
Merge tag 'gcc-plugins-v5.11-rc3' of git://git./linux/kernel/git/kees/linux
Pull gcc-plugins fix from Kees Cook:
"Bump c++ standard version for latest GCC versions (Valdis Kletnieks)"
* tag 'gcc-plugins-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: fix gcc 11 indigestion with plugins...
Linus Torvalds [Thu, 7 Jan 2021 20:21:32 +0000 (12:21 -0800)]
Merge tag 'spi-fix-v5.11-rc2' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of core fixes here, both to do with handling of drivers which
don't report their maximum speed since we factored some of the
handling for transfer speeds out into the core in the previous
release.
There's also some driver specific fixes, including a relatively large
set for some races around timeouts in spi-geni-qcom"
* tag 'spi-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix the divide by 0 error when calculating xfer waiting time
spi: Fix the clamping of spi->max_speed_hz
spi: altera: fix return value for altera_spi_txrx()
spi: stm32: FIFO threshold level - fix align packet size
spi: spi-geni-qcom: Print an error when we timeout setting the CS
spi: spi-geni-qcom: Don't try to set CS if an xfer is pending
spi: spi-geni-qcom: Fail new xfers if xfer/cancel/abort pending
spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case
Linus Torvalds [Thu, 7 Jan 2021 20:18:22 +0000 (12:18 -0800)]
Merge tag 'regulator-fix-v5.11-rc2' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few minor driver specific fixes, mostly DT bindings document bits,
plus a new device ID"
* tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom-rpmh: add QCOM_COMMAND_DB dependency
regulator: qcom-rpmh-regulator: correct hfsmps515 definition
dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revision
regulator: bd718x7: Add enable times
regulator: pf8x00: Use specific compatible strings for devices
Linus Torvalds [Thu, 7 Jan 2021 19:57:56 +0000 (11:57 -0800)]
Merge tag 'regmap-fix-v5.11-rc2' of git://git./linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes for leaks when attaching a device to a
preexisting regmap"
* tag 'regmap-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()
regmap: debugfs: Fix a memory leak when calling regmap_attach_dev
Valdis Klētnieks [Sat, 26 Dec 2020 18:21:58 +0000 (13:21 -0500)]
gcc-plugins: fix gcc 11 indigestion with plugins...
Fedora Rawhide has started including gcc 11,and the g++ compiler
throws a wobbly when it hits scripts/gcc-plugins:
HOSTCXX scripts/gcc-plugins/latent_entropy_plugin.so
In file included from /usr/include/c++/11/type_traits:35,
from /usr/lib/gcc/x86_64-redhat-linux/11/plugin/include/system.h:244,
from /usr/lib/gcc/x86_64-redhat-linux/11/plugin/include/gcc-plugin.h:28,
from scripts/gcc-plugins/gcc-common.h:7,
from scripts/gcc-plugins/latent_entropy_plugin.c:78:
/usr/include/c++/11/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO
C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options.
32 | #error This file requires compiler and library support \
In fact, it works just fine with c++11, which has been in gcc since 4.8,
and we now require 4.9 as a minimum.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/82487.1609006918@turing-police
Linus Torvalds [Wed, 6 Jan 2021 19:19:08 +0000 (11:19 -0800)]
Merge tag 'for-5.11-rc2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes that arrived before the end of the year:
- a bunch of fixes related to transaction handle lifetime wrt various
operations (umount, remount, qgroup scan, orphan cleanup)
- async discard scheduling fixes
- fix item size calculation when item keys collide for extend refs
(hardlinks)
- fix qgroup flushing from running transaction
- fix send, wrong file path when there is an inode with a pending
rmdir
- fix deadlock when cloning inline extent and low on free metadata
space"
* tag 'for-5.11-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: run delayed iputs when remounting RO to avoid leaking them
btrfs: add assertion for empty list of transactions at late stage of umount
btrfs: fix race between RO remount and the cleaner task
btrfs: fix transaction leak and crash after cleaning up orphans on RO mount
btrfs: fix transaction leak and crash after RO remount caused by qgroup rescan
btrfs: merge critical sections of discard lock in workfn
btrfs: fix racy access to discard_ctl data
btrfs: fix async discard stall
btrfs: tests: initialize test inodes location
btrfs: send: fix wrong file path when there is an inode with a pending rmdir
btrfs: qgroup: don't try to wait flushing if we're already holding a transaction
btrfs: correctly calculate item size used when item key collision happens
btrfs: fix deadlock when cloning inline extent and low on free metadata space
Linus Torvalds [Tue, 5 Jan 2021 21:30:28 +0000 (13:30 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull vhost bugfix from Michael Tsirkin:
"This fixes configs with vhost vsock behind a viommu"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/vsock: add IOTLB API support
Linus Torvalds [Tue, 5 Jan 2021 21:25:49 +0000 (13:25 -0800)]
Merge tag 'sound-5.11-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of USB- and HD-audio fixes.
Most of them are device-specific quirks while one fix is for a
regression due to an incorrect mutex unlock introduced in this merge
window"
* tag 'sound-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/via: Fix runtime PM for Clevo W35xSS
ALSA: usb-audio: Add quirk for RC-505
ALSA: hda/hdmi: Fix incorrect mutex unlock in silent_stream_disable()
ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7
ALSA: hda/realtek: Add two "Intel Reference board" SSID in the ALC256.
ALSA: hda/realtek: Add mute LED quirk for more HP laptops
ALSA: hda/conexant: add a new hda codec CX11970
ALSA: usb-audio: Add quirk for BOSS AD-10
ALSA: usb-audio: Fix UBSAN warnings for MIDI jacks
ALSA: hda/realtek - Modify Dell platform name
ALSA: hda/realtek - Fix speaker volume control on Lenovo C940
Linus Torvalds [Tue, 5 Jan 2021 20:46:27 +0000 (12:46 -0800)]
Merge tag 'arc-5.11-rc3' of git://git./linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
"Things are quieter on upstreaming front as we are mostly focusing on
ARCv3/ARC64 port.
This contains just build system updates from Masahiro Yamada"
* tag 'arc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: build: use $(READELF) instead of hard-coded readelf
ARC: build: remove unneeded extra-y
ARC: build: move symlink creation to arch/arc/Makefile to avoid race
ARC: build: add boot_targets to PHONY
ARC: build: add uImage.lzma to the top-level target
ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
Linus Torvalds [Tue, 5 Jan 2021 20:38:56 +0000 (12:38 -0800)]
Merge tag 'net-5.11-rc3' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, wireless and bpf
trees.
Current release - regressions:
- mt76: fix NULL pointer dereference in mt76u_status_worker and
mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: fixes possible oops in mtype_resize in ipset
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with the
Intel i219-LM Ethernet controllers to fix power use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid a
deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- sysfs: take the rtnl lock around XPS configuration
- xsk: fix memory leak for failed bind and rollback reservation at
NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: fix use of incorrect min_headroom size and a false
positive lockdep splat from the TX lock
- mvpp2:
- clear force link UP during port init procedure in case
bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- stmmac: ignore the second clock input, current clock framework does
not handle exclusive clock use well, other drivers may reconfigure
the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme"
* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
r8169: work around power-saving bug on some chip versions
net: usb: qmi_wwan: add Quectel EM160R-GL
selftests: mlxsw: Set headroom size of correct port
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
ibmvnic: fix: NULL pointer dereference.
docs: networking: packet_mmap: fix old config reference
docs: networking: packet_mmap: fix formatting for C macros
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
bareudp: Fix use of incorrect min_headroom size
bareudp: set NETIF_F_LLTX flag
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
atlantic: remove architecture depends
erspan: fix version 1 check in gre_parse_header()
net: hns: fix return value check in __lb_other_process()
net: sched: prevent invalid Scell_log shift count
net: neighbor: fix a crash caused by mod zero
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
...
Linus Torvalds [Tue, 5 Jan 2021 19:55:46 +0000 (11:55 -0800)]
Merge tag 'afs-fixes-
04012021' of git://git./linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Two fixes.
The first is the fix for the strnlen() array limit check and the
second fixes the calculation of the number of dirent records used to
represent any particular filename length"
* tag 'afs-fixes-
04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix directory entry size calculation
afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y
Linus Torvalds [Tue, 5 Jan 2021 19:33:00 +0000 (11:33 -0800)]
mm: make wait_on_page_writeback() wait for multiple pending writebacks
Ever since commit
2a9127fcf229 ("mm: rewrite wait_on_page_bit_common()
logic") we've had some very occasional reports of BUG_ON(PageWriteback)
in write_cache_pages(), which we thought we already fixed in commit
073861ed77b6 ("mm: fix VM_BUG_ON(PageTail) and BUG_ON(PageWriteback)").
But syzbot just reported another one, even with that commit in place.
And it turns out that there's a simpler way to trigger the BUG_ON() than
the one Hugh found with page re-use. It all boils down to the fact that
the page writeback is ostensibly serialized by the page lock, but that
isn't actually really true.
Yes, the people _setting_ writeback all do so under the page lock, but
the actual clearing of the bit - and waking up any waiters - happens
without any page lock.
This gives us this fairly simple race condition:
CPU1 = end previous writeback
CPU2 = start new writeback under page lock
CPU3 = write_cache_pages()
CPU1 CPU2 CPU3
---- ---- ----
end_page_writeback()
test_clear_page_writeback(page)
... delayed...
lock_page();
set_page_writeback()
unlock_page()
lock_page()
wait_on_page_writeback();
wake_up_page(page, PG_writeback);
.. wakes up CPU3 ..
BUG_ON(PageWriteback(page));
where the BUG_ON() happens because we woke up the PG_writeback bit
becasue of the _previous_ writeback, but a new one had already been
started because the clearing of the bit wasn't actually atomic wrt the
actual wakeup or serialized by the page lock.
The reason this didn't use to happen was that the old logic in waiting
on a page bit would just loop if it ever saw the bit set again.
The nice proper fix would probably be to get rid of the whole "wait for
writeback to clear, and then set it" logic in the writeback path, and
replace it with an atomic "wait-to-set" (ie the same as we have for page
locking: we set the page lock bit with a single "lock_page()", not with
"wait for lock bit to clear and then set it").
However, out current model for writeback is that the waiting for the
writeback bit is done by the generic VFS code (ie write_cache_pages()),
but the actual setting of the writeback bit is done much later by the
filesystem ".writepages()" function.
IOW, to make the writeback bit have that same kind of "wait-to-set"
behavior as we have for page locking, we'd have to change our roughly
~50 different writeback functions. Painful.
Instead, just make "wait_on_page_writeback()" loop on the very unlikely
situation that the PG_writeback bit is still set, basically re-instating
the old behavior. This is very non-optimal in case of contention, but
since we only ever set the bit under the page lock, that situation is
controlled.
Reported-by: syzbot+2fc0712f8f8b8b8fa0ef@syzkaller.appspotmail.com
Fixes:
2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic")
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Tue, 5 Jan 2021 11:42:29 +0000 (14:42 +0300)]
regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()
This code will leak "map->debugfs_name" because the if statement is
reversed so it only frees NULL pointers instead of non-NULL. In
fact the if statement is not required and should just be removed
because kfree() accepts NULL pointers.
Fixes:
cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Jakub Kicinski [Mon, 4 Jan 2021 22:02:02 +0000 (14:02 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Missing sanitization of rateest userspace string, bug has been
triggered by syzbot, patch from Florian Westphal.
2) Report EOPNOTSUPP on missing set features in nft_dynset, otherwise
error reporting to userspace via EINVAL is misleading since this is
reserved for malformed netlink requests.
3) New binaries with old kernels might silently accept several set
element expressions. New binaries set on the NFT_SET_EXPR and
NFT_DYNSET_F_EXPR flags to request for several expressions per
element, hence old kernels which do not support for this bail out
with EOPNOTSUPP.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nftables: add set expression flags
netfilter: nft_dynset: report EOPNOTSUPP on missing set feature
netfilter: xt_RATEEST: reject non-null terminated string from userspace
====================
Link: https://lore.kernel.org/r/20210103192920.18639-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 4 Jan 2021 21:47:17 +0000 (13:47 -0800)]
Merge branch 'net-dsa-lantiq_gswip-two-fixes-for-net-stable'
Martin Blumenstingl says:
====================
net: dsa: lantiq_gswip: two fixes for -net/-stable
While testing the lantiq_gswip driver in OpenWrt at least one board had
a non-working Ethernet port connected to an internal 100Mbit/s PHY22F
GPHY. The problem which could be observed:
- the PHY would detect the link just fine
- ethtool stats would see the TX counter rise
- the RX counter in ethtool was stuck at zero
It turns out that two independent patches are needed to fix this:
- first we need to enable the MII data lines also for internal PHYs
- second we need to program the GSWIP_MII_CFG registers for all ports
except the CPU port
These two patches have also been tested by back-porting them on top of
Linux 5.4.86 in OpenWrt.
Special thanks to Hauke for debugging and brainstorming this on IRC
with me!
====================
Link: https://lore.kernel.org/r/20210103012544.3259029-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Blumenstingl [Sun, 3 Jan 2021 01:25:44 +0000 (02:25 +0100)]
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
There is one GSWIP_MII_CFG register for each switch-port except the CPU
port. The register offset for the first port is 0x0, 0x02 for the
second, 0x04 for the third and so on.
Update the driver to not only restrict the GSWIP_MII_CFG registers to
ports 0, 1 and 5. Handle ports 0..5 instead but skip the CPU port. This
means we are not overwriting the configuration for the third port (port
two since we start counting from zero) with the settings for the sixth
port (with number five) anymore.
The GSWIP_MII_PCDU(p) registers are not updated because there's really
only three (one for each of the following ports: 0, 1, 5).
Fixes:
14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Blumenstingl [Sun, 3 Jan 2021 01:25:43 +0000 (02:25 +0100)]
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
Enable GSWIP_MII_CFG_EN also for internal PHYs to make traffic flow.
Without this the PHY link is detected properly and ethtool statistics
for TX are increasing but there's no RX traffic coming in.
Fixes:
14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Suggested-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xie He [Thu, 31 Dec 2020 17:43:31 +0000 (09:43 -0800)]
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
In lapb_device_event, lapb_devtostruct is called to get a reference to
an object of "struct lapb_cb". lapb_devtostruct increases the refcount
of the object and returns a pointer to it. However, we didn't decrease
the refcount after we finished using the pointer. This patch fixes this
problem.
Fixes:
a4989fa91110 ("net/lapb: support netdev events")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201231174331.64539-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit [Wed, 30 Dec 2020 18:33:34 +0000 (19:33 +0100)]
r8169: work around power-saving bug on some chip versions
A user reported failing network with RTL8168dp (a quite rare chip
version). Realtek confirmed that few chip versions suffer from a PLL
power-down hw bug.
Fixes:
07df5bd874f0 ("r8169: power down chip in probe")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/a1c39460-d533-7f9e-fa9d-2b8990b02426@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bjørn Mork [Wed, 30 Dec 2020 15:24:51 +0000 (16:24 +0100)]
net: usb: qmi_wwan: add Quectel EM160R-GL
New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA,
and ff/ff/ff for RMNET/QMI.
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0620 Rev= 4.09
S: Manufacturer=Quectel
S: Product=EM160R-GL
S: SerialNumber=
e31cedc1
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20201230152451.245271-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Wed, 30 Dec 2020 11:42:51 +0000 (13:42 +0200)]
selftests: mlxsw: Set headroom size of correct port
The test was setting the headroom size of the wrong port. This was not
visible because of a firmware bug that canceled this bug.
Set the headroom size of the correct port, so that the test will pass
with both old and new firmware versions.
Fixes:
bfa804784e32 ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20201230114251.394009-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Charles Keepax [Mon, 4 Jan 2021 10:38:02 +0000 (10:38 +0000)]
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
macb_set_tx_clk were gated on the presence of this flag.
- if (!clk)
+ if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
However the flag was not added to anything other than the new
sama7g5_gem, turning that function call into a no op for all other
systems. This breaks the networking on Zynq.
The commit message adding this states: a new capability so that
macb_set_tx_clock() to not be called for IPs having this
capability
This strongly implies that present of the flag was intended to skip
the function not absence of the flag. Update the if statement to
this effect, which repairs the existing users.
Fixes:
daafa1d33cc9 ("net: macb: add capability to not set the clock rate")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210104103802.13091-1-ckeepax@opensource.cirrus.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YANG LI [Wed, 30 Dec 2020 07:23:14 +0000 (15:23 +0800)]
ibmvnic: fix: NULL pointer dereference.
The error is due to dereference a null pointer in function
reset_one_sub_crq_queue():
if (!scrq) {
netdev_dbg(adapter->netdev,
"Invalid scrq reset. irq (%d) or msgs(%p).\n",
scrq->irq, scrq->msgs);
return -EINVAL;
}
If the expression is true, scrq must be a null pointer and cannot
dereference.
Fixes:
9281cf2d5840 ("ibmvnic: avoid memset null scrq msgs")
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci <abaci@linux.alibaba.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/1609312994-121032-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Baruch Siach [Tue, 29 Dec 2020 09:08:39 +0000 (11:08 +0200)]
docs: networking: packet_mmap: fix old config reference
Before commit
889b8f964f2f ("packet: Kill CONFIG_PACKET_MMAP.") there
used to be a CONFIG_PACKET_MMAP config symbol that depended on
CONFIG_PACKET. The text still implies that PACKET_MMAP can be disabled.
Remove that from the text, as well as reference to old kernel versions.
Also, drop reference to broken link to information for pre 2.6.5
kernels.
Make a slight working improvement (s/In/On/) while at it.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/80089f3783372c8fd7833f28ce774a171b2ef252.1609232919.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Baruch Siach [Tue, 29 Dec 2020 09:08:38 +0000 (11:08 +0200)]
docs: networking: packet_mmap: fix formatting for C macros
The citation of macro definitions should appear in a code block.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/5cb47005e7a59b64299e038827e295822193384c.1609232919.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yunjian Wang [Tue, 29 Dec 2020 02:01:48 +0000 (10:01 +0800)]
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
Currently the vhost_zerocopy_callback() maybe be called to decrease
the refcount when sendmsg fails in tun. The error handling in vhost
handle_tx_zerocopy() will try to decrease the same refcount again.
This is wrong. To fix this issue, we only call vhost_net_ubuf_put()
when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS.
Fixes:
bab632d69ee4 ("vhost: vhost TX zero-copy support")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Mon, 28 Dec 2020 15:21:46 +0000 (15:21 +0000)]
bareudp: Fix use of incorrect min_headroom size
In the bareudp6_xmit_skb(), it calculates min_headroom.
At that point, it uses struct iphdr, but it's not correct.
So panic could occur.
The struct ipv6hdr should be used.
Test commands:
ip netns add A
ip netns add B
ip link add veth0 netns A type veth peer name veth1 netns B
ip netns exec A ip link set veth0 up
ip netns exec A ip a a 2001:db8:0::1/64 dev veth0
ip netns exec B ip link set veth1 up
ip netns exec B ip a a 2001:db8:0::2/64 dev veth1
for i in {10..1}
do
let A=$i-1
ip netns exec A ip link add bareudp$i type bareudp dstport $i \
ethertype 0x86dd
ip netns exec A ip link set bareudp$i up
ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i
ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \
2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \
dev bareudp$i
ip netns exec B ip link add bareudp$i type bareudp dstport $i \
ethertype 0x86dd
ip netns exec B ip link set bareudp$i up
ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i
ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \
2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \
dev bareudp$i
done
ip netns exec A ping 2001:db8:7::2
Splat looks like:
[ 66.436679][ C2] skbuff: skb_under_panic: text:
ffffffff928614c8 len:454 put:14 head:
ffff88810abb4000 data:
ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0
[ 66.441626][ C2] ------------[ cut here ]------------
[ 66.443458][ C2] kernel BUG at net/core/skbuff.c:109!
[ 66.445313][ C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 66.447606][ C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ #819
[ 66.450251][ C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 66.453713][ C2] RIP: 0010:skb_panic+0x15d/0x15f
[ 66.455345][ C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80
[ 66.462314][ C2] RSP: 0018:
ffff888119209648 EFLAGS:
00010286
[ 66.464281][ C2] RAX:
0000000000000089 RBX:
ffff888003159000 RCX:
0000000000000000
[ 66.467216][ C2] RDX:
0000000000000089 RSI:
0000000000000008 RDI:
ffffed10232412c0
[ 66.469768][ C2] RBP:
ffff88810a53d440 R08:
ffffed102328018d R09:
ffffed102328018d
[ 66.472297][ C2] R10:
ffff888119400c67 R11:
ffffed102328018c R12:
000000000000000e
[ 66.474833][ C2] R13:
ffff88810abb3ffa R14:
00000000000001c0 R15:
0000000000003ec0
[ 66.477361][ C2] FS:
00007f37c0c72f00(0000) GS:
ffff888119200000(0000) knlGS:
0000000000000000
[ 66.480214][ C2] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 66.482296][ C2] CR2:
000055a058808570 CR3:
000000011039e002 CR4:
00000000003706e0
[ 66.484811][ C2] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 66.487793][ C2] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 66.490424][ C2] Call Trace:
[ 66.491469][ C2] <IRQ>
[ 66.492374][ C2] ? eth_header+0x28/0x190
[ 66.494054][ C2] ? eth_header+0x28/0x190
[ 66.495401][ C2] skb_push.cold.99+0x22/0x22
[ 66.496700][ C2] eth_header+0x28/0x190
[ 66.497867][ C2] neigh_resolve_output+0x3de/0x720
[ 66.499615][ C2] ? __neigh_update+0x7e8/0x20a0
[ 66.501176][ C2] __neigh_update+0x8bd/0x20a0
[ 66.502749][ C2] ndisc_update+0x34/0xc0
[ 66.504010][ C2] ndisc_recv_na+0x8da/0xb80
[ 66.505041][ C2] ? pndisc_redo+0x20/0x20
[ 66.505888][ C2] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 66.506965][ C2] ndisc_rcv+0x3a0/0x470
[ 66.507797][ C2] icmpv6_rcv+0xad9/0x1b00
[ 66.508645][ C2] ip6_protocol_deliver_rcu+0xcd6/0x1560
[ 66.509719][ C2] ip6_input_finish+0x5b/0xf0
[ 66.510615][ C2] ip6_input+0xcd/0x2d0
[ 66.511406][ C2] ? ip6_input_finish+0xf0/0xf0
[ 66.512327][ C2] ? rcu_read_lock_held+0x91/0xa0
[ 66.513279][ C2] ? ip6_protocol_deliver_rcu+0x1560/0x1560
[ 66.514414][ C2] ipv6_rcv+0xe8/0x300
[ ... ]
Acked-by: Guillaume Nault <gnault@redhat.com>
Fixes:
571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201228152146.24270-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Mon, 28 Dec 2020 15:21:36 +0000 (15:21 +0000)]
bareudp: set NETIF_F_LLTX flag
Like other tunneling interfaces, the bareudp doesn't need TXLOCK.
So, It is good to set the NETIF_F_LLTX flag to improve performance and
to avoid lockdep's false-positive warning.
Test commands:
ip netns add A
ip netns add B
ip link add veth0 netns A type veth peer name veth1 netns B
ip netns exec A ip link set veth0 up
ip netns exec A ip a a 10.0.0.1/24 dev veth0
ip netns exec B ip link set veth1 up
ip netns exec B ip a a 10.0.0.2/24 dev veth1
for i in {2..1}
do
let A=$i-1
ip netns exec A ip link add bareudp$i type bareudp \
dstport $i ethertype ip
ip netns exec A ip link set bareudp$i up
ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i
ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \
dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i
ip netns exec B ip link add bareudp$i type bareudp \
dstport $i ethertype ip
ip netns exec B ip link set bareudp$i up
ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i
ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \
dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i
done
ip netns exec A ping 10.0.2.2
Splat looks like:
[ 96.992803][ T822] ============================================
[ 96.993954][ T822] WARNING: possible recursive locking detected
[ 96.995102][ T822] 5.10.0+ #819 Not tainted
[ 96.995927][ T822] --------------------------------------------
[ 96.997091][ T822] ping/822 is trying to acquire lock:
[ 96.998083][ T822]
ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[ 96.999813][ T822]
[ 96.999813][ T822] but task is already holding lock:
[ 97.001192][ T822]
ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[ 97.002908][ T822]
[ 97.002908][ T822] other info that might help us debug this:
[ 97.004401][ T822] Possible unsafe locking scenario:
[ 97.004401][ T822]
[ 97.005784][ T822] CPU0
[ 97.006407][ T822] ----
[ 97.007010][ T822] lock(_xmit_NONE#2);
[ 97.007779][ T822] lock(_xmit_NONE#2);
[ 97.008550][ T822]
[ 97.008550][ T822] *** DEADLOCK ***
[ 97.008550][ T822]
[ 97.010057][ T822] May be due to missing lock nesting notation
[ 97.010057][ T822]
[ 97.011594][ T822] 7 locks held by ping/822:
[ 97.012426][ T822] #0:
ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00
[ 97.014191][ T822] #1:
ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020
[ 97.016045][ T822] #2:
ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960
[ 97.017897][ T822] #3:
ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960
[ 97.019684][ T822] #4:
ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp]
[ 97.021573][ T822] #5:
ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020
[ 97.023424][ T822] #6:
ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960
[ 97.025259][ T822]
[ 97.025259][ T822] stack backtrace:
[ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ #819
[ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 97.029407][ T822] Call Trace:
[ 97.030015][ T822] dump_stack+0x99/0xcb
[ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9
[ 97.031773][ T822] ? stack_trace_save+0x81/0xa0
[ 97.032661][ T822] ? register_lock_class+0x1910/0x1910
[ 97.033673][ T822] ? register_lock_class+0x1910/0x1910
[ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0
[ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0
[ 97.036690][ T822] lock_acquire+0x1b2/0x730
[ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960
[ 97.038466][ T822] ? check_flags+0x50/0x50
[ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0
[ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10
[ 97.041151][ T822] _raw_spin_lock+0x30/0x70
[ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960
[ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960
[ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290
[ 97.044824][ T822] ? mark_held_locks+0xb7/0x120
[ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0
[ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0
[ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0
[ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120
[ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0
[ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0
[ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0
[ 97.052443][ T822] ? check_chain_key+0x244/0x5f0
[ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0
[ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020
[ 97.055263][ T822] ? pneigh_lookup+0x410/0x410
[ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020
[ ... ]
Acked-by: Guillaume Nault <gnault@redhat.com>
Fixes:
571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201228152136.24215-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 4 Jan 2021 18:55:19 +0000 (10:55 -0800)]
Merge branch 'rcu/urgent' of git://git./linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This is a fix for a regression in the v5.10 merge window, but it was
reported quite late in the v5.10 process, plus generating and testing
the fix took some time.
The regression is due to commit
36dadef23fcc ("kprobes: Init kprobes
in early_initcall") which on powerpc can use RCU Tasks before
initialization, resulting in boot failures.
The fix is straightforward, simply moving initialization of RCU Tasks
before the early_initcall()s. The fix has been exposed to -next and
kbuild test robot testing, and has been tested by the PowerPC guys"
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu-tasks: Move RCU-tasks initialization to before early_initcall()
Linus Torvalds [Mon, 4 Jan 2021 18:47:38 +0000 (10:47 -0800)]
Merge tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux
Pull ENABLE_MUST_CHECK removal from Miguel Ojeda:
"Remove CONFIG_ENABLE_MUST_CHECK (Masahiro Yamada)"
Note that this removes the config option by making the must-check
unconditional, not by removing must check itself.
* tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux:
Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK
Mark Brown [Mon, 4 Jan 2021 16:23:20 +0000 (16:23 +0000)]
Merge qcom driver fix into regulator-5.11
Takashi Iwai [Mon, 4 Jan 2021 15:30:46 +0000 (16:30 +0100)]
ALSA: hda/via: Fix runtime PM for Clevo W35xSS
Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that
looses the power state of some nodes after the runtime resume. This
was worked around by disabling the default runtime PM via a denylist
entry. Since 5.10.x made the runtime PM applied (casually) even
though it's disabled in the denylist, this problem was revisited. The
result was that disabling power_save_node feature suffices for the
runtime PM problem.
This patch implements the disablement of power_save_node feature in
VIA codec for the device. It also drops the former denylist entry,
too, as the runtime PM should work in the codec side properly now.
Fixes:
b529ef2464ad ("ALSA: hda: Add Clevo W35xSS_370SS to the power_save blacklist")
Reported-by: Christian Labisch <clnetbox@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210104153046.19993-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Arnd Bergmann [Wed, 30 Dec 2020 14:56:23 +0000 (15:56 +0100)]
regulator: qcom-rpmh: add QCOM_COMMAND_DB dependency
A built-in regulator driver cannot link against a modular cmd_db driver:
qcom-rpmh-regulator.c:(.text+0x174): undefined reference to `cmd_db_read_addr'
There is already a dependency for RPMh, so add another one of this
type for cmd_db.
Fixes:
34c5aa2666db ("regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error")
Fixes:
46fc033eba42 ("regulator: add QCOM RPMh regulator driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201230145712.3133110-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Dmitry Baryshkov [Thu, 31 Dec 2020 12:23:46 +0000 (15:23 +0300)]
regulator: qcom-rpmh-regulator: correct hfsmps515 definition
According to the datasheet pm8009's HFS515 regulators have 16mV
resolution rather than declared 1.6 mV. Correct the resolution.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes:
06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Dmitry Baryshkov [Thu, 31 Dec 2020 12:23:45 +0000 (15:23 +0300)]
dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revision
PMIC pm8009 has special revision (P=1) made for sm8250 platform. The
major difference is the S2 regulator which supplies 0.95 V instead of
2.848V. Add special compatibility string for this chip revision.
The datasheet calls the chip just pm8009-1, so use the same name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-2-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Xu Yilun [Mon, 4 Jan 2021 01:29:09 +0000 (09:29 +0800)]
spi: fix the divide by 0 error when calculating xfer waiting time
The xfer waiting time is the result of xfer->len / xfer->speed_hz. This
patch makes the assumption of 100khz xfer speed if the xfer->speed_hz is
not assigned and stays 0. This avoids the divide by 0 issue and ensures
a reasonable tolerant waiting time.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1609723749-3557-1-git-send-email-yilun.xu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
David Howells [Wed, 23 Dec 2020 10:39:57 +0000 (10:39 +0000)]
afs: Fix directory entry size calculation
The number of dirent records used by an AFS directory entry should be
calculated using the assumption that there is a 16-byte name field in the
first block, rather than a 20-byte name field (which is actually the case).
This miscalculation is historic and effectively standard, so we have to use
it.
The calculation we need to use is:
1 + (((strlen(name) + 1) + 15) >> 5)
where we are adding one to the strlen() result to account for the NUL
termination.
Fix this by the following means:
(1) Create an inline function to do the calculation for a given name
length.
(2) Use the function to calculate the number of records used for a dirent
in afs_dir_iterate_block().
Use this to move the over-end check out of the loop since it only
needs to be done once.
Further use this to only go through the loop for the 2nd+ records
composing an entry. The only test there now is for if the record is
allocated - and we already checked the first block at the top of the
outer loop.
(3) Add a max name length check in afs_dir_iterate_block().
(4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function
from (1) to calculate the number of blocks rather than doing it
incorrectly themselves.
Fixes:
63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...")
Fixes: ^
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
David Howells [Mon, 21 Dec 2020 22:37:58 +0000 (22:37 +0000)]
afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y
AFS has a structured layout in its directory contents (AFS dirs are
downloaded as files and parsed locally by the client for lookup/readdir).
The slots in the directory are defined by union afs_xdr_dirent. This,
however, only directly allows a name of a length that will fit into that
union. To support a longer name, the next 1-8 contiguous entries are
annexed to the first one and the name flows across these.
afs_dir_iterate_block() uses strnlen(), limited to the space to the end of
the page, to find out how long the name is. This worked fine until
6a39e62abbaf. With that commit, the compiler determines the size of the
array and asserts that the string fits inside that array. This is a
problem for AFS because we *expect* it to overflow one or more arrays.
A similar problem also occurs in afs_dir_scan_block() when a directory file
is being locally edited to avoid the need to redownload it. There strlen()
was being used safely because each page has the last byte set to 0 when the
file is downloaded and validated (in afs_dir_check_page()).
Fix this by changing the afs_xdr_dirent union name field to an
indeterminate-length array and dropping the overflow field.
(Note that whilst looking at this, I realised that the calculation of the
number of slots a dirent used is non-standard and not quite right, but I'll
address that in a separate patch.)
The issue can be triggered by something like:
touch /afs/example.com/thisisaveryveryverylongname
and it generates a report that looks like:
detected buffer overflow in strnlen
------------[ cut here ]------------
kernel BUG at lib/string.c:1149!
...
RIP: 0010:fortify_panic+0xf/0x11
...
Call Trace:
afs_dir_iterate_block+0x12b/0x35b
afs_dir_iterate+0x14e/0x1ce
afs_do_lookup+0x131/0x417
afs_lookup+0x24f/0x344
lookup_open.isra.0+0x1bb/0x27d
open_last_lookups+0x166/0x237
path_openat+0xe0/0x159
do_filp_open+0x48/0xa4
? kmem_cache_alloc+0xf5/0x16e
? __clear_close_on_exec+0x13/0x22
? _raw_spin_unlock+0xa/0xb
do_sys_openat2+0x72/0xde
do_sys_open+0x3b/0x58
do_syscall_64+0x2d/0x3a
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
6a39e62abbaf ("lib: string.h: detect intra-object overflow in fortified string functions")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: Daniel Axtens <dja@axtens.net>
Linus Torvalds [Sun, 3 Jan 2021 23:55:30 +0000 (15:55 -0800)]
Linux 5.11-rc2
Timon Reinold [Sat, 2 Jan 2021 21:08:35 +0000 (22:08 +0100)]
ALSA: usb-audio: Add quirk for RC-505
BOSS RC-505 (shown by lsusb as "Roland Corp. RC-505") does require the
same quirk as these other BOSS devices.
Without this quirk it is neither possible to capture audio from nor to
write audio to the RC-505. Both just result in an empty audio
stream. With these changes both capture and playback seem to work
quite fine. MIDI funtionality was not tested.
Tested-by: Harry Reinold <harry.reinold@posteo.de>
Signed-off-by: Timon Reinold <tirei@agon.one>
Link: https://lore.kernel.org/r/20210102210835.21268-1-tirei@agon.one
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ard Biesheuvel [Sat, 2 Jan 2021 13:59:09 +0000 (14:59 +0100)]
crypto: ecdh - avoid buffer overflow in ecdh_set_secret()
Pavel reports that commit
17858b140bf4 ("crypto: ecdh - avoid unaligned
accesses in ecdh_set_secret()") fixes one problem but introduces another:
the unconditional memcpy() introduced by that commit may overflow the
target buffer if the source data is invalid, which could be the result of
intentional tampering.
So check params.key_size explicitly against the size of the target buffer
before validating the key further.
Fixes:
17858b140bf4 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Sun, 13 Dec 2020 14:39:29 +0000 (15:39 +0100)]
crypto: arm/chacha-neon - add missing counter increment
Commit
86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block
size multiples") refactored the chacha block handling in the glue code in
a way that may result in the counter increment to be omitted when calling
chacha_block_xor_neon() to process a full block. This violates the skcipher
API, which requires that the output IV is suitable for handling more input
as long as the preceding input has been presented in round multiples of the
block size. Also, the same code is exposed via the chacha library interface
whose callers may actually rely on this increment to occur even for final
blocks that are smaller than the chacha block size.
So increment the counter after calling chacha_block_xor_neon().
Fixes:
86cd97ec4b943af3 ("crypto: arm/chacha-neon - optimize for non-block size multiples")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Sat, 2 Jan 2021 20:22:46 +0000 (12:22 -0800)]
Merge tag 's390-5.11-3' of git://git./linux/kernel/git/s390/linux
Pull s390 cleanups from Vasily Gorbik:
"Update defconfigs and sort config select list"
* tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/Kconfig: sort config S390 select list once again
s390: update defconfigs
Linus Torvalds [Sat, 2 Jan 2021 19:53:05 +0000 (11:53 -0800)]
Merge tag 'pm-5.11-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a crash in intel_pstate during resume from suspend-to-RAM
that may occur after recent changes and two resource leaks in error
paths in the operating performance points (OPP) framework, add a new
C-states table to intel_idle and update the cpuidle MAINTAINERS entry
to cover the governors too.
Specifics:
- Fix recently introduced crash in the intel_pstate driver that
occurs if scale-invariance is disabled during resume from
suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR
values made by the platform firmware (Rafael Wysocki).
- Fix a memory leak and add a missing clk_put() in error paths in the
OPP framework (Quanyang Wang, Viresh Kumar).
- Add new C-states table for SnowRidge processors to the intel_idle
driver (Artem Bityutskiy).
- Update the MAINTAINERS entry for cpuidle to make it clear that the
governors are covered by it too (Lukas Bulwahn)"
* tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: add SnowRidge C-state table
cpufreq: intel_pstate: Fix fast-switch fallback path
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
Rafael J. Wysocki [Sat, 2 Jan 2021 09:16:32 +0000 (10:16 +0100)]
Merge branches 'pm-cpufreq' and 'pm-cpuidle'
* pm-cpufreq:
cpufreq: intel_pstate: Fix fast-switch fallback path
* pm-cpuidle:
intel_idle: add SnowRidge C-state table
MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
Linus Torvalds [Fri, 1 Jan 2021 20:58:07 +0000 (12:58 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
Linus Torvalds [Fri, 1 Jan 2021 20:49:09 +0000 (12:49 -0800)]
Merge tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two minor block fixes from this last week that should go into 5.11:
- Add missing NOWAIT debugfs definition (Andres)
- Fix kerneldoc warning introduced this merge window (Randy)"
* tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
block: add debugfs stanza for QUEUE_FLAG_NOWAIT
fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
Linus Torvalds [Fri, 1 Jan 2021 20:29:49 +0000 (12:29 -0800)]
Merge tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into 5.11, all marked for stable as well:
- Fix issue around identity COW'ing and users that share a ring
across processes
- Fix a hang associated with unregistering fixed files (Pavel)
- Move the 'process is exiting' cancelation a bit earlier, so
task_works aren't affected by it (Pavel)"
* tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
kernel/io_uring: cancel io_uring before task works
io_uring: fix io_sqe_files_unregister() hangs
io_uring: add a helper for setting a ref node
io_uring: don't assume mm is constant across submits
Linus Torvalds [Mon, 28 Dec 2020 19:40:22 +0000 (11:40 -0800)]
depmod: handle the case of /sbin/depmod without /sbin in PATH
Commit
436e980e2ed5 ("kbuild: don't hardcode depmod path") stopped
hard-coding the path of depmod, but in the process caused trouble for
distributions that had that /sbin location, but didn't have it in the
PATH (generally because /sbin is limited to the super-user path).
Work around it for now by just adding /sbin to the end of PATH in the
depmod.sh script.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Fri, 1 Jan 2021 08:38:52 +0000 (09:38 +0100)]
ALSA: hda/hdmi: Fix incorrect mutex unlock in silent_stream_disable()
The silent_stream_disable() function introduced by the commit
b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to
DP") takes the per_pin->lock mutex, but it unlocks the wrong one,
spec->pcm_lock, which causes a deadlock. This patch corrects it.
Fixes:
b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to DP")
Reported-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: <stable@vger.kernel.org>
Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210101083852.12094-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kai-Heng Feng [Wed, 30 Dec 2020 12:56:35 +0000 (20:56 +0800)]
ALSA: hda/realtek: Enable mute and micmute LED on HP EliteBook 850 G7
HP EliteBook 850 G7 uses the same GPIO pins as ALC285_FIXUP_HP_GPIO_LED
to enable mute and micmute LED. So apply the quirk to enable the LEDs.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201230125636.45028-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PeiSen Hou [Thu, 31 Dec 2020 10:57:28 +0000 (11:57 +0100)]
ALSA: hda/realtek: Add two "Intel Reference board" SSID in the ALC256.
Add two "Intel Reference boad" SSID in the alc256.
Enable "power saving mode" and Enable "headset jack mode".
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5978d2267f034c28973d117925ec9c63@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Manuel Jiménez [Tue, 29 Dec 2020 14:38:56 +0000 (15:38 +0100)]
ALSA: hda/realtek: Add mute LED quirk for more HP laptops
HP Pavilion 13-bb0000 (SSID 103c:87c8) needs the same
quirk as other models with ALC287.
Signed-off-by: Manuel Jiménez <mjbfm99@me.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/X+s/gKNydVrI6nLj@HP-Pavilion-13
Signed-off-by: Takashi Iwai <tiwai@suse.de>
bo liu [Tue, 29 Dec 2020 03:52:26 +0000 (11:52 +0800)]
ALSA: hda/conexant: add a new hda codec CX11970
The current kernel does not support the cx11970 codec chip.
Add a codec configuration item to kernel.
[ Minor coding style fix by tiwai ]
Signed-off-by: bo liu <bo.liu@senarytech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pavel Begunkov [Wed, 30 Dec 2020 21:34:16 +0000 (21:34 +0000)]
kernel/io_uring: cancel io_uring before task works
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Wed, 30 Dec 2020 21:34:15 +0000 (21:34 +0000)]
io_uring: fix io_sqe_files_unregister() hangs
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes,
however requests keeping them may never complete, e.g. because of some
userspace dependency. Make sure it's interruptible otherwise it would
hang forever.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Wed, 30 Dec 2020 21:34:14 +0000 (21:34 +0000)]
io_uring: add a helper for setting a ref node
Setting a new reference node to a file data is not trivial, don't repeat
it, add and use a helper.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Wed, 30 Dec 2020 20:02:12 +0000 (12:02 -0800)]
Merge tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for an edge case in MClientRequest encoding and a couple of
trivial fixups for the new msgr2 support"
* tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client:
libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE
libceph: align session_key and con_secret to 16 bytes
libceph: fix auth_signature buffer allocation in secure mode
ceph: reencode gid_list when reconnecting
Artem Bityutskiy [Sun, 27 Dec 2020 10:11:16 +0000 (12:11 +0200)]
intel_idle: add SnowRidge C-state table
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville
platforms.
The following has been changed.
1. C1E latency changed from 10us to 15us. It was measured using the
open source "wult" tool (the "nic" method, 15us is the 99.99th
percentile).
2. C1E power break even changed from 20us to 25us, which may result
in less C1E residency in some workloads.
3. C6 latency changed from 50us to 130us. Measured the same way as C1E.
The C6 C-state is supported only by some SnowRidge revisions, so add a C-state
table commentary about this.
On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of
the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even
though C6 is present in the table, the driver will only use it if the CPU does
support it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Tue, 29 Dec 2020 17:08:18 +0000 (18:08 +0100)]
cpufreq: intel_pstate: Fix fast-switch fallback path
When sugov_update_single_perf() falls back to the "frequency"
path due to the missing scale-invariance, it will call
cpufreq_driver_fast_switch() via sugov_fast_switch()
and the driver's ->fast_switch() callback will be invoked,
so it must not be NULL.
However, after commit
a365ab6b9dfb ("cpufreq: intel_pstate: Implement
the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to
NULL when it is going to use intel_cpufreq_adjust_perf(), which is a
mistake, because on x86 the scale-invariance may be turned off
dynamically, so modify it to retain the original ->adjust_perf()
callback pointer.
Fixes:
a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Wed, 30 Dec 2020 17:19:34 +0000 (18:19 +0100)]
Merge branch 'opp/linux-next' of git://git./linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework fixes for 5.11-rc2
from Viresh Kumar:
"This contains two patches to fix freeing of resources in error paths."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
Heiko Carstens [Mon, 28 Dec 2020 08:51:57 +0000 (09:51 +0100)]
s390/Kconfig: sort config S390 select list once again
...and add comments at the top and bottom.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Heiko Carstens [Wed, 18 Nov 2020 20:23:33 +0000 (21:23 +0100)]
s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tudor Ambarus [Wed, 16 Dec 2020 09:23:21 +0000 (11:23 +0200)]
spi: Fix the clamping of spi->max_speed_hz
If spi->controller->max_speed_hz is zero, a non-zero spi->max_speed_hz
will be overwritten by zero. Make sure spi->controller->max_speed_hz
is not zero when clamping spi->max_speed_hz.
Put the spi->controller->max_speed_hz non-zero check higher in the if,
so that we avoid a superfluous init to zero when both spi->max_speed_hz
and spi->controller->max_speed_hz are zero.
Fixes:
9326e4f1e5dd ("spi: Limit the spi device max speed to controller's max speed")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201216092321.413262-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Andres Freund [Mon, 28 Dec 2020 19:27:18 +0000 (11:27 -0800)]
block: add debugfs stanza for QUEUE_FLAG_NOWAIT
This was missed in
021a24460dc2. Leads to the numeric value of
QUEUE_FLAG_NOWAIT (i.e. 29) showing up in
/sys/kernel/debug/block/*/state.
Fixes:
021a24460dc28e7412aecfae89f60e1847e685c0
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Randy Dunlap [Tue, 29 Dec 2020 03:47:06 +0000 (19:47 -0800)]
fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
Fix new kernel-doc warnings in fs/block_dev.c:
../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming'
../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev'
Fixes:
4e7b5671c6a8 ("block: remove i_bdev")
Fixes:
37c3fc9abb25 ("block: simplify the block device claiming interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Tue, 29 Dec 2020 23:45:49 +0000 (15:45 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"16 patches
Subsystems affected by this patch series: mm (selftests, hugetlb,
pagecache, mremap, kasan, and slub), kbuild, checkpatch, misc, and
lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: slub: call account_slab_page() after slab page initialization
zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
lib/zlib: fix inflating zlib streams on s390
lib/genalloc: fix the overflow when size is too big
kdev_t: always inline major/minor helper functions
sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
local64.h: make <asm/local64.h> mandatory
kasan: fix null pointer dereference in kasan_record_aux_stack
mm: generalise COW SMC TLB flushing race comment
mm/mremap.c: fix extent calculation
mm: memmap defer init doesn't work as expected
mm: add prototype for __add_to_page_cache_locked()
checkpatch: prefer strscpy to strlcpy
Revert "kbuild: avoid static_assert for genksyms"
mm/hugetlb: fix deadlock in hugetlb_cow error path
selftests/vm: fix building protection keys test
Roman Gushchin [Tue, 29 Dec 2020 23:15:07 +0000 (15:15 -0800)]
mm: slub: call account_slab_page() after slab page initialization
It's convenient to have page->objects initialized before calling into
account_slab_page(). In particular, this information can be used to
pre-alloc the obj_cgroup vector.
Let's call account_slab_page() a bit later, after the initialization of
page->objects.
This commit doesn't bring any functional change, but is required for
further optimizations.
[akpm@linux-foundation.org: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch]
Link: https://lkml.kernel.org/r/20201110195753.530157-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Tue, 29 Dec 2020 23:15:04 +0000 (15:15 -0800)]
zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
In commit
11fb479ff5d9 ("zlib: export S390 symbols for zlib modules"), I
added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that
these should probably be in dfltcc_syms.c with the other
EXPORT_SYMBOL()s.
However, that is contrary to the current kernel style, which places
EXPORT_SYMBOL() immediately after the function that it applies to, so
move all EXPORT_SYMBOL()s to their respective function locations and
drop the dfltcc_syms.c file. Also move MODULE_LICENSE() from the
deleted file to dfltcc.c.
[rdunlap@infradead.org: remove dfltcc_syms.o from Makefile]
Link: https://lkml.kernel.org/r/20201227171837.15492-1-rdunlap@infradead.org
Link: https://lkml.kernel.org/r/20201219052530.28461-1-rdunlap@infradead.org
Fixes:
11fb479ff5d9 ("zlib: export S390 symbols for zlib modules")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Zaslonko Mikhail <zaslonko@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ilya Leoshkevich [Tue, 29 Dec 2020 23:15:01 +0000 (15:15 -0800)]
lib/zlib: fix inflating zlib streams on s390
Decompressing zlib streams on s390 fails with "incorrect data check"
error.
Userspace zlib checks inflate_state.flags in order to byteswap checksums
only for zlib streams, and s390 hardware inflate code, which was ported
from there, tries to match this behavior. At the same time, kernel zlib
does not use inflate_state.flags, so it contains essentially random
values. For many use cases either zlib stream is zeroed out or checksum
is not used, so this problem is masked, but at least SquashFS is still
affected.
Fix by always passing a checksum to and from the hardware as is, which
matches zlib_inflate()'s expectations.
Link: https://lkml.kernel.org/r/20201215155551.894884-1-iii@linux.ibm.com
Fixes:
126196100063 ("lib/zlib: add s390 hardware support for kernel zlib_inflate")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Shijie [Tue, 29 Dec 2020 23:14:58 +0000 (15:14 -0800)]
lib/genalloc: fix the overflow when size is too big
Some graphic card has very big memory on chip, such as 32G bytes.
In the following case, it will cause overflow:
pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE);
ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE);
va = gen_pool_alloc(pool, SZ_4G);
The overflow occurs in gen_pool_alloc_algo_owner():
....
size = nbits << order;
....
The @nbits is "int" type, so it will overflow.
Then the gen_pool_avail() will return the wrong value.
This patch converts some "int" to "unsigned long", and
changes the compare code in while.
Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Josh Poimboeuf [Tue, 29 Dec 2020 23:14:55 +0000 (15:14 -0800)]
kdev_t: always inline major/minor helper functions
Silly GCC doesn't always inline these trivial functions.
Fixes the following warning:
arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled
Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> [build-tested]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Shijie [Tue, 29 Dec 2020 23:14:52 +0000 (15:14 -0800)]
sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
Add these macros, since we can use them in drivers.
Link: https://lkml.kernel.org/r/20201229072819.11183-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Tue, 29 Dec 2020 23:14:49 +0000 (15:14 -0800)]
local64.h: make <asm/local64.h> mandatory
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and
remove all arch/*/include/asm/local64.h arch-specific files since they
only #include <asm-generic/local64.h>.
This fixes build errors on arch/c6x/ and arch/nios2/ for
block/blk-iocost.c.
Build-tested on 21 of 25 arch-es. (tools problems on the others)
Yes, we could even rename <asm-generic/local64.h> to
<linux/local64.h> and change all #includes to use
<linux/local64.h> instead.
Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Walter Wu [Tue, 29 Dec 2020 23:14:46 +0000 (15:14 -0800)]
kasan: fix null pointer dereference in kasan_record_aux_stack
Syzbot reported the following [1]:
BUG: kernel NULL pointer dereference, address:
0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
2d993067 P4D
2d993067 PUD
19a3c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 3852 Comm: kworker/1:2 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events free_ipc
RIP: 0010:kasan_record_aux_stack+0x77/0xb0
Add null checking slab object from kasan_get_alloc_meta() in order to
avoid null pointer dereference.
[1] https://syzkaller.appspot.com/x/log.txt?x=
10a82a50d00000
Link: https://lkml.kernel.org/r/20201228080018.23041-1-walter-zh.wu@mediatek.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicholas Piggin [Tue, 29 Dec 2020 23:14:43 +0000 (15:14 -0800)]
mm: generalise COW SMC TLB flushing race comment
I'm not sure if I'm completely missing something here, but AFAIKS the
reference to the mysterious "COW SMC race" confuses the issue. The
original changelog and mailing list thread didn't help me either.
This SMC race is where the problem was detected, but isn't the general
problem bigger and more obvious: that the new PTE could be picked up at
any time by any TLB while entries for the old PTE exist in other TLBs
before the TLB flush takes effect?
The case where the iTLB and dTLB of a CPU are pointing at different pages
is an interesting one but follows from the general problem.
The other (minor) thing with the comment I think it makes it a bit clearer
to say what the old code was doing (i.e., it avoids the race as opposed to
what?).
References:
4ce072f1faf29 ("mm: fix a race condition under SMC + COW")
Link: https://lkml.kernel.org/r/20201215121119.351650-1-npiggin@gmail.com
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kalesh Singh [Tue, 29 Dec 2020 23:14:40 +0000 (15:14 -0800)]
mm/mremap.c: fix extent calculation
When `next < old_addr`, `next - old_addr` arithmetic underflows causing
`extent` to be incorrect.
Make `extent` the smaller of `next - old_addr` or `old_end - old_addr`.
Link: https://lkml.kernel.org/r/20201219170433.2418867-1-kaleshsingh@google.com
Fixes:
c49dd34018026 ("mm: speedup mremap on 1GB or larger regions")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baoquan He [Tue, 29 Dec 2020 23:14:37 +0000 (15:14 -0800)]
mm: memmap defer init doesn't work as expected
VMware observed a performance regression during memmap init on their
platform, and bisected to commit
73a6e474cb376 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.
Before the commit:
[0.033176] Normal zone: 1445888 pages used for memmap
[0.033176] Normal zone:
89391104 pages, LIFO batch:63
[0.035851] ACPI: PM-Timer IO Port: 0x448
With commit
[0.026874] Normal zone: 1445888 pages used for memmap
[0.026875] Normal zone:
89391104 pages, LIFO batch:63
[2.028450] ACPI: PM-Timer IO Port: 0x448
The root cause is the current memmap defer init doesn't work as expected.
Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node. However, since commit
73a6e474cb376,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.
E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2. The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's
only one memory section's memmap initialized. That's why more time is
costed at the time.
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]
Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.
Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit
73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Rahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Souptick Joarder [Tue, 29 Dec 2020 23:14:34 +0000 (15:14 -0800)]
mm: add prototype for __add_to_page_cache_locked()
Otherwise it causes a gcc warning:
mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]
A previous attempt to make this function static led to compilation
errors when CONFIG_DEBUG_INFO_BTF is enabled because
__add_to_page_cache_locked() is referred to by BPF code.
Adding a prototype will silence the warning.
Link: https://lkml.kernel.org/r/1608693702-4665-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 29 Dec 2020 23:14:31 +0000 (15:14 -0800)]
checkpatch: prefer strscpy to strlcpy
Prefer strscpy over the deprecated strlcpy function.
Link: https://lkml.kernel.org/r/19fe91084890e2c16fe56f960de6c570a93fa99b.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Tue, 29 Dec 2020 23:14:28 +0000 (15:14 -0800)]
Revert "kbuild: avoid static_assert for genksyms"
This reverts commit
14dc3983b5dff513a90bd5a8cc90acaf7867c3d0.
Macro Elver had sent a fix proper fix earlier, and also pointed out
corner cases:
"I guess what you propose is simpler, but might still have corner cases
where we still get warnings. In particular, if some file (for whatever
reason) does not include build_bug.h and uses a raw _Static_assert(),
then we still get warnings. E.g. I see 1 user of raw _Static_assert()
(drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h )."
I believe the raw use of _Static_assert() should be allowed, so this
should be fixed in genksyms.
Even after commit
14dc3983b5df ("kbuild: avoid static_assert for
genksyms"), I confirmed the following test code emits the warning.
---------------->8----------------
#include <linux/export.h>
_Static_assert((1 ?: 0), "");
void foo(void) { }
EXPORT_SYMBOL(foo);
---------------->8----------------
WARNING: modpost: EXPORT symbol "foo" [vmlinux] version generation failed, symbol will not be versioned.
Now that commit
869b91992bce ("genksyms: Ignore module scoped
_Static_assert()") fixed this issue properly, the workaround should
be reverted.
Link: https://lkml.org/lkml/2020/12/10/845
Link: https://lkml.kernel.org/r/20201219183911.181442-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Tue, 29 Dec 2020 23:14:25 +0000 (15:14 -0800)]
mm/hugetlb: fix deadlock in hugetlb_cow error path
syzbot reported the deadlock here [1]. The issue is in hugetlb cow
error handling when there are not enough huge pages for the faulting
task which took the original reservation. It is possible that other
(child) tasks could have consumed pages associated with the reservation.
In this case, we want the task which took the original reservation to
succeed. So, we unmap any associated pages in children so that they can
be used by the faulting task that owns the reservation.
The unmapping code needs to hold i_mmap_rwsem in write mode. However,
due to commit
c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd
sharing synchronization") we are already holding i_mmap_rwsem in read
mode when hugetlb_cow is called.
Technically, i_mmap_rwsem does not need to be held in read mode for COW
mappings as they can not share pmd's. Modifying the fault code to not
take i_mmap_rwsem in read mode for COW (and other non-sharable) mappings
is too involved for a stable fix.
Instead, we simply drop the hugetlb_fault_mutex and i_mmap_rwsem before
unmapping. This is OK as it is technically not needed. They are
reacquired after unmapping as expected by calling code. Since this is
done in an uncommon error path, the overhead of dropping and reacquiring
mutexes is acceptable.
While making changes, remove redundant BUG_ON after unmap_ref_private.
[1] https://lkml.kernel.org/r/
000000000000b73ccc05b5cf8558@google.com
Link: https://lkml.kernel.org/r/4c5781b8-3b00-761e-c0c7-c5edebb6ec1a@oracle.com
Fixes:
c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: syzbot+5eee4145df3c15e96625@syzkaller.appspotmail.com
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harish [Tue, 29 Dec 2020 23:14:22 +0000 (15:14 -0800)]
selftests/vm: fix building protection keys test
Commit
d8cbe8bfa7d ("tools/testing/selftests/vm: fix build error") tried
to include a ARCH check for powerpc, however ARCH is not defined in the
Makefile before including lib.mk. This makes test building to skip on
both x86 and powerpc.
Fix the arch check by replacing it using machine type as it is already
defined and used in the test.
Link: https://lkml.kernel.org/r/20201215100402.257376-1-harish@linux.ibm.com
Fixes:
d8cbe8bfa7d ("tools/testing/selftests/vm: fix build error")
Signed-off-by: Harish <harish@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Tue, 29 Dec 2020 17:50:46 +0000 (10:50 -0700)]
io_uring: don't assume mm is constant across submits
If we COW the identity, we assume that ->mm never changes. But this
isn't true of multiple processes end up sharing the ring. Hence treat
id->mm like like any other process compontent when it comes to the
identity mapping. This is pretty trivial, just moving the existing grab
into io_grab_identity(), and including a check for the match.
Cc: stable@vger.kernel.org # 5.10
Fixes:
1e6fa5216a0e ("io_uring: COW io_identity on mismatch")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>:
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>:
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xu Yilun [Tue, 29 Dec 2020 05:27:41 +0000 (13:27 +0800)]
spi: altera: fix return value for altera_spi_txrx()
This patch fixes the return value for altera_spi_txrx. It should return
1 for interrupt transfer mode, and return 0 for polling transfer mode.
The altera_spi_txrx() implements the spi_controller.transfer_one
callback. According to the spi-summary.rst, the transfer_one should
return 0 when transfer is finished, return 1 when transfer is still in
progress.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1609219662-27057-2-git-send-email-yilun.xu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Xiaolei Wang [Tue, 29 Dec 2020 10:50:46 +0000 (18:50 +0800)]
regmap: debugfs: Fix a memory leak when calling regmap_attach_dev
After initializing the regmap through
syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the
device, because the debugfs_name has been allocated, there is no
need to redistribute it again
unreferenced object 0xd8399b80 (size 64):
comm "swapper/0", pid 1, jiffies
4294937641 (age 278.590s)
hex dump (first 32 bytes):
64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72
dummy-iomuxc-gpr
40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69
@20e4000..R[.~Bi
backtrace:
[<
ca384d6f>] kasprintf+0x2c/0x54
[<
6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc
[<
bc4181da>] __regmap_init+0xc38/0xd88
[<
1f7e0609>] of_syscon_register+0x168/0x294
[<
735e8766>] device_node_get_regmap+0x6c/0x98
[<
d96c8982>] imx6ul_init_machine+0x20/0x88
[<
0456565b>] customize_machine+0x1c/0x30
[<
d07393d8>] do_one_initcall+0x80/0x3ac
[<
7e584867>] kernel_init_freeable+0x170/0x1f0
[<
80074741>] kernel_init+0x8/0x120
[<
285d6f28>] ret_from_fork+0x14/0x20
[<
00000000>] 0x0
Fixes:
9b947a13e7f6 ("regmap: use debugfs even when no device")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20201229105046.41984-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Tue, 29 Dec 2020 08:34:28 +0000 (09:34 +0100)]
ALSA: usb-audio: Add quirk for BOSS AD-10
BOSS AD-10 requires the very same quirk like other BOSS devices to
enable the special implicit feedback mode.
Reported-and-tested-by: Martin Passing <martin@passing.name>
Link: https://lore.kernel.org/r/20201229083428.20467-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David S. Miller [Mon, 28 Dec 2020 23:20:48 +0000 (15:20 -0800)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2020-12-28
The following pull-request contains BPF updates for your *net* tree.
There is a small merge conflict between bpf tree commit
69ca310f3416
("bpf: Save correct stopping point in file seq iteration") and net tree
commit
66ed594409a1 ("bpf/task_iter: In task_file_seq_get_next use
task_lookup_next_fd_rcu"). The get_files_struct() does not exist anymore
in net, so take the hunk in HEAD and add the `info->tid = curr_tid` to
the error path:
[...]
curr_task = task_seq_get_next(ns, &curr_tid, true);
if (!curr_task) {
info->task = NULL;
info->tid = curr_tid;
return NULL;
}
/* set info->task and info->tid */
[...]
We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 11 files changed, 75 insertions(+), 20 deletions(-).
The main changes are:
1) Various AF_XDP fixes such as fill/completion ring leak on failed bind and
fixing a race in skb mode's backpressure mechanism, from Magnus Karlsson.
2) Fix latency spikes on lockdep enabled kernels by adding a rescheduling
point to BPF hashtab initialization, from Eric Dumazet.
3) Fix a splat in task iterator by saving the correct stopping point in the
seq file iteration, from Jonathan Lemon.
4) Fix BPF maps selftest by adding retries in case hashtab returns EBUSY
errors on update/deletes, from Andrii Nakryiko.
5) Fix BPF selftest error reporting to something more user friendly if the
vmlinux BTF cannot be found, from Kamal Mostafa.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xie He [Mon, 28 Dec 2020 02:53:39 +0000 (18:53 -0800)]
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
ppp_cp_event is called directly or indirectly by ppp_rx with "ppp->lock"
held. It may call mod_timer to add a new timer. However, at the same time
ppp_timer may be already running and waiting for "ppp->lock". In this
case, there's no need for ppp_timer to continue running and it can just
exit.
If we let ppp_timer continue running, it may call add_timer. This causes
kernel panic because add_timer can't be called with a timer pending.
This patch fixes this problem.
Fixes:
e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.")
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Léo Le Bouter [Sun, 27 Dec 2020 16:11:36 +0000 (17:11 +0100)]
atlantic: remove architecture depends
This was tested on a RaptorCS Talos II with IBM POWER9 DD2.2 CPUs and an
ASUS XG-C100F PCI-e card without any issue. Speeds of ~8Gbps could be
attained with not-very-scientific (wget HTTP) both-ways measurements on
a local network. No warning or error reported in kernel logs. The
drivers seems to be portable enough for it not to be gated like such.
Signed-off-by: Léo Le Bouter <lle-bout@zaclys.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sat, 26 Dec 2020 23:44:53 +0000 (15:44 -0800)]
erspan: fix version 1 check in gre_parse_header()
Both version 0 and version 1 use ETH_P_ERSPAN, but version 0 does not
have an erspan header. So the check in gre_parse_header() is wrong,
we have to distinguish version 1 from version 0.
We can just check the gre header length like is_erspan_type1().
Fixes:
cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup")
Reported-by: syzbot+f583ce3d4ddf9836b27a@syzkaller.appspotmail.com
Cc: William Tu <u9012063@gmail.com>
Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunjian Wang [Sat, 26 Dec 2020 08:10:05 +0000 (16:10 +0800)]
net: hns: fix return value check in __lb_other_process()
The function skb_copy() could return NULL, the return value
need to be checked.
Fixes:
b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 25 Dec 2020 06:23:44 +0000 (22:23 -0800)]
net: sched: prevent invalid Scell_log shift count
Check Scell_log shift size in red_check_params() and modify all callers
of red_check_params() to pass Scell_log.
This prevents a shift out-of-bounds as detected by UBSAN:
UBSAN: shift-out-of-bounds in ./include/net/red.h:252:22
shift exponent 72 is too large for 32-bit type 'int'
Fixes:
8afa10cbe281 ("net_sched: red: Avoid illegal values")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+97c5bd9cc81eca63d36e@syzkaller.appspotmail.com
Cc: Nogah Frankel <nogahf@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
weichenchen [Fri, 25 Dec 2020 05:44:45 +0000 (13:44 +0800)]
net: neighbor: fix a crash caused by mod zero
pneigh_enqueue() tries to obtain a random delay by mod
NEIGH_VAR(p, PROXY_DELAY). However, NEIGH_VAR(p, PROXY_DELAY)
migth be zero at that point because someone could write zero
to /proc/sys/net/ipv4/neigh/[device]/proxy_delay after the
callers check it.
This patch uses prandom_u32_max() to get a random delay instead
which avoids potential division by zero.
Signed-off-by: weichenchen <weichen.chen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Thu, 24 Dec 2020 19:01:09 +0000 (20:01 +0100)]
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
RT_TOS() only clears one of the ECN bits. Therefore, when
fib_compute_spec_dst() resorts to a fib lookup, it can return
different results depending on the value of the second ECN bit.
For example, ECT(0) and ECT(1) packets could be treated differently.
$ ip netns add ns0
$ ip netns add ns1
$ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
$ ip -netns ns0 link set dev lo up
$ ip -netns ns1 link set dev lo up
$ ip -netns ns0 link set dev veth01 up
$ ip -netns ns1 link set dev veth10 up
$ ip -netns ns0 address add 192.0.2.10/24 dev veth01
$ ip -netns ns1 address add 192.0.2.11/24 dev veth10
$ ip -netns ns1 address add 192.0.2.21/32 dev lo
$ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 src 192.0.2.21
$ ip netns exec ns1 sysctl -wq net.ipv4.icmp_echo_ignore_broadcasts=0
With TOS 4 and ECT(1), ns1 replies using source address 192.0.2.21
(ping uses -Q to set all TOS and ECN bits):
$ ip netns exec ns0 ping -c 1 -b -Q 5 192.0.2.255
[...]
64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.544 ms
But with TOS 4 and ECT(0), ns1 replies using source address 192.0.2.11
because the "tos 4" route isn't matched:
$ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255
[...]
64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.597 ms
After this patch the ECN bits don't affect the result anymore:
$ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255
[...]
64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.591 ms
Fixes:
35ebf65e851c ("ipv4: Create and use fib_compute_spec_dst() helper.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Chulski [Wed, 23 Dec 2020 18:35:21 +0000 (20:35 +0200)]
net: mvpp2: fix pkt coalescing int-threshold configuration
The packet coalescing interrupt threshold has separated registers
for different aggregated/cpu (sw-thread). The required value should
be loaded for every thread but not only for 1 current cpu.
Fixes:
213f428f5056 ("net: mvpp2: add support for TX interrupts and RX queue distribution modes")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608748521-11033-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Mon, 28 Dec 2020 22:13:24 +0000 (14:13 -0800)]
Merge branch 'net-ipa-fix-some-new-build-warnings'
Alex Elder says:
====================
net: ipa: fix some new build warnings
I got a super friendly message from the Intel kernel test robot that
pointed out that two patches I posted last week caused new build
warnings. I already had these problems fixed in my own tree but
the fix was not included in what I sent out last week.
====================
Link: https://lore.kernel.org/r/20201226213737.338928-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / platform / kernel / linux-rpi.git / log