ndesaulniers@google.com [Tue, 1 Aug 2023 22:22:17 +0000 (15:22 -0700)]
word-at-a-time: use the same return type for has_zero regardless of endianness
Compiling big-endian targets with Clang produces the diagnostic:
fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
} while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants)));
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning
It appears that when has_zero was introduced, two definitions were
produced with different signatures (in particular different return
types).
Looking at the usage in hash_name() in fs/namei.c, I suspect that
has_zero() is meant to be invoked twice per while loop iteration; using
logical-or would not update `bdata` when `a` did not have zeros. So I
think it's preferred to always return an unsigned long rather than a
bool than update the while loop in hash_name() to use a logical-or
rather than bitwise-or.
[ Also changed powerpc version to do the same - Linus ]
Link: https://github.com/ClangBuiltLinux/linux/issues/1832
Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/
Fixes:
36126f8f2ed8 ("word-at-a-time: make the interfaces truly generic")
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hans de Goede [Sat, 29 Jul 2023 14:05:00 +0000 (16:05 +0200)]
wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers
a backtrace caused by the following field-spanning warning:
memcpy: detected field-spanning write (size 120) of single field
"¶ms_le->channel_list[0]" at
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2)
The driver still works after this warning. The warning was introduced by the
new field-spanning write checks which were enabled recently.
Fix this by replacing the channel_list[1] declaration at the end of
the struct with a flexible array declaration.
Most users of struct brcmf_scan_params_le calculate the size to alloc
using the size of the non flex-array part of the struct + needed extra
space, so they do not care about sizeof(struct brcmf_scan_params_le).
brcmf_notify_escan_complete() however uses the struct on the stack,
expecting there to be room for at least 1 entry in the channel-list
to store the special -1 abort channel-id.
To make this work use an anonymous union with a padding member
added + the actual channel_list flexible array.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230729140500.27892-1-hdegoede@redhat.com
Benjamin Poirier [Mon, 31 Jul 2023 20:02:08 +0000 (16:02 -0400)]
vxlan: Fix nexthop hash size
The nexthop code expects a 31 bit hash, such as what is returned by
fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash
returned by skb_get_hash() can lead to problems related to the fact that
'int hash' is a negative number when the MSB is set.
In the case of hash threshold nexthop groups, nexthop_select_path_hthr()
will disproportionately select the first nexthop group entry. In the case
of resilient nexthop groups, nexthop_select_path_res() may do an out of
bounds access in nh_buckets[], for example:
hash = -
912054133
num_nh_buckets = 2
bucket_index = 65535
which leads to the following panic:
BUG: unable to handle page fault for address:
ffffc900025910c8
PGD
100000067 P4D
100000067 PUD
10026b067 PMD 0
Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:
ffff88810c36f260 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
00000000002000c0 RCX:
ffffffffaf02dd77
RDX:
dffffc0000000000 RSI:
0000000000000008 RDI:
ffffc900025910c8
RBP:
ffffc900025910c0 R08:
0000000000000001 R09:
fffff520004b2219
R10:
ffffc900025910cf R11:
31392d2068736168 R12:
00000000002000c0
R13:
ffffc900025910c0 R14:
00000000fffef608 R15:
ffff88811840e900
FS:
0000000000000000(0000) GS:
ffff8881f7000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffc900025910c8 CR3:
0000000129d00000 CR4:
0000000000750ee0
PKRU:
55555554
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x1ee/0x5c0
? __pfx_is_prefetch.constprop.0+0x10/0x10
? __pfx_page_fault_oops+0x10/0x10
? search_bpf_extables+0xfe/0x1c0
? fixup_exception+0x3b/0x470
? exc_page_fault+0xf6/0x110
? asm_exc_page_fault+0x26/0x30
? nexthop_select_path+0x197/0xbf0
? nexthop_select_path+0x197/0xbf0
? lock_is_held_type+0xe7/0x140
vxlan_xmit+0x5b2/0x2340
? __lock_acquire+0x92b/0x3370
? __pfx_vxlan_xmit+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_register_lock_class+0x10/0x10
? skb_network_protocol+0xce/0x2d0
? dev_hard_start_xmit+0xca/0x350
? __pfx_vxlan_xmit+0x10/0x10
dev_hard_start_xmit+0xca/0x350
__dev_queue_xmit+0x513/0x1e20
? __pfx___dev_queue_xmit+0x10/0x10
? __pfx_lock_release+0x10/0x10
? mark_held_locks+0x44/0x90
? skb_push+0x4c/0x80
? eth_header+0x81/0xe0
? __pfx_eth_header+0x10/0x10
? neigh_resolve_output+0x215/0x310
? ip6_finish_output2+0x2ba/0xc90
ip6_finish_output2+0x2ba/0xc90
? lock_release+0x236/0x3e0
? ip6_mtu+0xbb/0x240
? __pfx_ip6_finish_output2+0x10/0x10
? find_held_lock+0x83/0xa0
? lock_is_held_type+0xe7/0x140
ip6_finish_output+0x1ee/0x780
ip6_output+0x138/0x460
? __pfx_ip6_output+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
? __pfx_ip6_finish_output+0x10/0x10
NF_HOOK.constprop.0+0xc0/0x420
? __pfx_NF_HOOK.constprop.0+0x10/0x10
? ndisc_send_skb+0x2c0/0x960
? __pfx_lock_release+0x10/0x10
? __local_bh_enable_ip+0x93/0x110
? lock_is_held_type+0xe7/0x140
ndisc_send_skb+0x4be/0x960
? __pfx_ndisc_send_skb+0x10/0x10
? mark_held_locks+0x65/0x90
? find_held_lock+0x83/0xa0
ndisc_send_ns+0xb0/0x110
? __pfx_ndisc_send_ns+0x10/0x10
addrconf_dad_work+0x631/0x8e0
? lock_acquire+0x180/0x3f0
? __pfx_addrconf_dad_work+0x10/0x10
? mark_held_locks+0x24/0x90
process_one_work+0x582/0x9c0
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? mark_held_locks+0x24/0x90
worker_thread+0x93/0x630
? __kthread_parkme+0xdc/0x100
? __pfx_worker_thread+0x10/0x10
kthread+0x1a5/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
RIP: 0000:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0000:
0000000000000000 EFLAGS:
00000000 ORIG_RAX:
0000000000000000
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000000
R13:
0000000000000000 R14:
0000000000000000 R15:
0000000000000000
</TASK>
Modules linked in:
CR2:
ffffc900025910c8
---[ end trace
0000000000000000 ]---
RIP: 0010:nexthop_select_path+0x197/0xbf0
Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85
RSP: 0018:
ffff88810c36f260 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
00000000002000c0 RCX:
ffffffffaf02dd77
RDX:
dffffc0000000000 RSI:
0000000000000008 RDI:
ffffc900025910c8
RBP:
ffffc900025910c0 R08:
0000000000000001 R09:
fffff520004b2219
R10:
ffffc900025910cf R11:
31392d2068736168 R12:
00000000002000c0
R13:
ffffc900025910c0 R14:
00000000fffef608 R15:
ffff88811840e900
FS:
0000000000000000(0000) GS:
ffff8881f7000000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffffffffd6 CR3:
0000000129d00000 CR4:
0000000000750ee0
PKRU:
55555554
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fix this problem by ensuring the MSB of hash is 0 using a right shift - the
same approach used in fib_multipath_hash() and rt6_multipath_hash().
Fixes:
1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yue Haibing [Tue, 1 Aug 2023 06:43:18 +0000 (14:43 +0800)]
ip6mr: Fix skb_under_panic in ip6mr_cache_report()
skbuff: skb_under_panic: text:
ffffffff88771f69 len:56 put:-4
head:
ffff88805f86a800 data:
ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:192!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x152/0x1d0
Call Trace:
<TASK>
skb_push+0xc4/0xe0
ip6mr_cache_report+0xd69/0x19b0
reg_vif_xmit+0x406/0x690
dev_hard_start_xmit+0x17e/0x6e0
__dev_queue_xmit+0x2d6a/0x3d20
vlan_dev_hard_start_xmit+0x3ab/0x5c0
dev_hard_start_xmit+0x17e/0x6e0
__dev_queue_xmit+0x2d6a/0x3d20
neigh_connected_output+0x3ed/0x570
ip6_finish_output2+0x5b5/0x1950
ip6_finish_output+0x693/0x11c0
ip6_output+0x24b/0x880
NF_HOOK.constprop.0+0xfd/0x530
ndisc_send_skb+0x9db/0x1400
ndisc_send_rs+0x12a/0x6c0
addrconf_dad_completed+0x3c9/0xea0
addrconf_dad_work+0x849/0x1420
process_one_work+0xa22/0x16e0
worker_thread+0x679/0x10c0
ret_from_fork+0x28/0x60
ret_from_fork_asm+0x11/0x20
When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit().
reg_vif_xmit()
ip6mr_cache_report()
skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4
And skb_push declared as:
void *skb_push(struct sk_buff *skb, unsigned int len);
skb->data -= len;
//0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850
skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.
Fixes:
14fb64e1f449 ("[IPV6] MROUTE: Support PIM-SM (SSM).")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandra Winter [Tue, 1 Aug 2023 08:00:16 +0000 (10:00 +0200)]
s390/qeth: Don't call dev_close/dev_open (DOWN/UP)
dev_close() and dev_open() are issued to change the interface state to DOWN
or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its
Ipv6 addresses and routes. We don't want this in cases of device recovery
(triggered by hardware or software) or when the qeth device is set
offline.
Setting a qeth device offline or online and device recovery actions call
netif_device_detach() and/or netif_device_attach(). That will reset or
set the LOWER_UP indication i.e. change the dev->state Bit
__LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and
still preserves the interface settings that are handled by the network
stack.
Don't call dev_open() nor dev_close() from the qeth device driver. Let the
network stack handle this.
Fixes:
d4560150cb47 ("s390/qeth: call dev_close() during recovery")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 2 Aug 2023 09:06:06 +0000 (10:06 +0100)]
Merge branch 'tun-tap-uid'
Laszlo Ersek says:
====================
tun/tap: set sk_uid from current_fsuid()
The original patches fixing CVE-2023-1076 are incorrect in my opinion.
This small series fixes them up; see the individual commit messages for
explanation.
I have a very elaborate test procedure demonstrating the problem for
both tun and tap; it involves libvirt, qemu, and "crash". I can share
that procedure if necessary, but it's indeed quite long (I wrote it
originally for our QE team).
The patches in this series are supposed to "re-fix" CVE-2023-1076; given
that said CVE is classified as Low Impact (CVSSv3=5.5), I'm posting this
publicly, and not suggesting any embargo. Red Hat Product Security may
assign a new CVE number later.
I've tested the patches on top of v6.5-rc4, with "crash" built at commit
c74f375e0ef7.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Laszlo Ersek [Mon, 31 Jul 2023 16:42:37 +0000 (18:42 +0200)]
net: tap_open(): set sk_uid from current_fsuid()
Commit
66b2c338adce initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/tapX" device node's owner UID. Per original
commit
86741ec25462 ("net: core: Add a UID field to struct sock.",
2016-11-04), that's wrong: the idea is to cache the UID of the userspace
process that creates the socket. Commit
86741ec25462 mentions socket() and
accept(); with "tap", the action that creates the socket is
open("/dev/tapX").
Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/tapX" will be owned by root, so in practice, commit
66b2c338adce has
no observable effect:
- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),
- after, "sk_uid" would be zero, due to "/dev/tapX" being owned by root.
What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes:
66b2c338adce ("tap: tap_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Laszlo Ersek [Mon, 31 Jul 2023 16:42:36 +0000 (18:42 +0200)]
net: tun_chr_open(): set sk_uid from current_fsuid()
Commit
a096ccca6e50 initializes the "sk_uid" field in the protocol socket
(struct sock) from the "/dev/net/tun" device node's owner UID. Per
original commit
86741ec25462 ("net: core: Add a UID field to struct
sock.", 2016-11-04), that's wrong: the idea is to cache the UID of the
userspace process that creates the socket. Commit
86741ec25462 mentions
socket() and accept(); with "tun", the action that creates the socket is
open("/dev/net/tun").
Therefore the device node's owner UID is irrelevant. In most cases,
"/dev/net/tun" will be owned by root, so in practice, commit
a096ccca6e50
has no observable effect:
- before, "sk_uid" would be zero, due to undefined behavior
(CVE-2023-1076),
- after, "sk_uid" would be zero, due to "/dev/net/tun" being owned by root.
What matters is the (fs)UID of the process performing the open(), so cache
that in "sk_uid".
Cc: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pietro Borrello <borrello@diag.uniroma1.it>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes:
a096ccca6e50 ("tun: tun_chr_open(): correctly initialize socket uid")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2173435
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lin Ma [Tue, 1 Aug 2023 01:32:48 +0000 (09:32 +0800)]
net: dcb: choose correct policy to parse DCB_ATTR_BCN
The dcbnl_bcn_setcfg uses erroneous policy to parse tb[DCB_ATTR_BCN],
which is introduced in commit
859ee3c43812 ("DCB: Add support for DCB
BCN"). Please see the comment in below code
static int dcbnl_bcn_setcfg(...)
{
...
ret = nla_parse_nested_deprecated(..., dcbnl_pfc_up_nest, .. )
// !!! dcbnl_pfc_up_nest for attributes
// DCB_PFC_UP_ATTR_0 to DCB_PFC_UP_ATTR_ALL in enum dcbnl_pfc_up_attrs
...
for (i = DCB_BCN_ATTR_RP_0; i <= DCB_BCN_ATTR_RP_7; i++) {
// !!! DCB_BCN_ATTR_RP_0 to DCB_BCN_ATTR_RP_7 in enum dcbnl_bcn_attrs
...
value_byte = nla_get_u8(data[i]);
...
}
...
for (i = DCB_BCN_ATTR_BCNA_0; i <= DCB_BCN_ATTR_RI; i++) {
// !!! DCB_BCN_ATTR_BCNA_0 to DCB_BCN_ATTR_RI in enum dcbnl_bcn_attrs
...
value_int = nla_get_u32(data[i]);
...
}
...
}
That is, the nla_parse_nested_deprecated uses dcbnl_pfc_up_nest
attributes to parse nlattr defined in dcbnl_pfc_up_attrs. But the
following access code fetch each nlattr as dcbnl_bcn_attrs attributes.
By looking up the associated nla_policy for dcbnl_bcn_attrs. We can find
the beginning part of these two policies are "same".
static const struct nla_policy dcbnl_pfc_up_nest[...] = {
[DCB_PFC_UP_ATTR_0] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_1] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_2] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_3] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_4] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_5] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_6] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_7] = {.type = NLA_U8},
[DCB_PFC_UP_ATTR_ALL] = {.type = NLA_FLAG},
};
static const struct nla_policy dcbnl_bcn_nest[...] = {
[DCB_BCN_ATTR_RP_0] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_1] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_2] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_3] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_4] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_5] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_6] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_7] = {.type = NLA_U8},
[DCB_BCN_ATTR_RP_ALL] = {.type = NLA_FLAG},
// from here is somewhat different
[DCB_BCN_ATTR_BCNA_0] = {.type = NLA_U32},
...
[DCB_BCN_ATTR_ALL] = {.type = NLA_FLAG},
};
Therefore, the current code is buggy and this
nla_parse_nested_deprecated could overflow the dcbnl_pfc_up_nest and use
the adjacent nla_policy to parse attributes from DCB_BCN_ATTR_BCNA_0.
Hence use the correct policy dcbnl_bcn_nest to parse the nested
tb[DCB_ATTR_BCN] TLV.
Fixes:
859ee3c43812 ("DCB: Add support for DCB BCN")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801013248.87240-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 1 Aug 2023 22:05:00 +0000 (15:05 -0700)]
Merge branch 'bnxt_en-2-xdp-bug-fixes'
Michael Chan says:
====================
bnxt_en: 2 XDP bug fixes
The first patch fixes XDP page pool logic on systems with page size >=
64K. The second patch fixes the max_mtu setting when an XDP program
supporting multi buffers is attached.
====================
Link: https://lore.kernel.org/r/20230731142043.58855-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan [Mon, 31 Jul 2023 14:20:43 +0000 (07:20 -0700)]
bnxt_en: Fix max_mtu setting for multi-buf XDP
The existing code does not allow the MTU to be set to the maximum even
after an XDP program supporting multiple buffers is attached. Fix it
to set the netdev->max_mtu to the maximum value if the attached XDP
program supports mutiple buffers, regardless of the current MTU value.
Also use a local variable dev instead of repeatedly using bp->dev.
Fixes:
1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230731142043.58855-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Somnath Kotur [Mon, 31 Jul 2023 14:20:42 +0000 (07:20 -0700)]
bnxt_en: Fix page pool logic for page size >= 64K
The RXBD length field on all bnxt chips is 16-bit and so we cannot
support a full page when the native page size is 64K or greater.
The non-XDP (non page pool) code path has logic to handle this but
the XDP page pool code path does not handle this. Add the missing
logic to use page_pool_dev_alloc_frag() to allocate 32K chunks if
the page size is 64K or greater.
Fixes:
9f4b28301ce6 ("bnxt: XDP multibuffer enablement")
Link: https://lore.kernel.org/netdev/20230728231829.235716-2-michael.chan@broadcom.com/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230731142043.58855-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Mon, 31 Jul 2023 18:15:53 +0000 (11:15 -0700)]
selftest: net: Assert on a proper value in so_incoming_cpu.c.
Dan Carpenter reported an error spotted by Smatch.
./tools/testing/selftests/net/so_incoming_cpu.c:163 create_clients()
error: uninitialized symbol 'ret'.
The returned value of sched_setaffinity() should be checked with
ASSERT_EQ(), but the value was not saved in a proper variable,
resulting in an error above.
Let's save the returned value of with sched_setaffinity().
Fixes:
6df96146b202 ("selftest: Add test for SO_INCOMING_CPU.")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-kselftest/
fe376760-33b6-4fc9-88e8-
178e809af1ac@moroto.mountain/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230731181553.5392-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark Brown [Mon, 31 Jul 2023 10:48:32 +0000 (11:48 +0100)]
net: netsec: Ignore 'phy-mode' on SynQuacer in DT mode
As documented in
acd7aaf51b20 ("netsec: ignore 'phy-mode' device
property on ACPI systems") the SocioNext SynQuacer platform ships with
firmware defining the PHY mode as RGMII even though the physical
configuration of the PHY is for TX and RX delays. Since
bbc4d71d63549bc
("net: phy: realtek: fix rtl8211e rx/tx delay config") this has caused
misconfiguration of the PHY, rendering the network unusable.
This was worked around for ACPI by ignoring the phy-mode property but
the system is also used with DT. For DT instead if we're running on a
SynQuacer force a working PHY mode, as well as the standard EDK2
firmware with DT there are also some of these systems that use u-boot
and might not initialise the PHY if not netbooting. Newer firmware
imagaes for at least EDK2 are available from Linaro so print a warning
when doing this.
Fixes:
533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230731-synquacer-net-v3-1-944be5f06428@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yuanjun Gong [Mon, 31 Jul 2023 09:05:35 +0000 (17:05 +0800)]
net: korina: handle clk prepare error in korina_probe()
in korina_probe(), the return value of clk_prepare_enable()
should be checked since it might fail. we can use
devm_clk_get_optional_enabled() instead of devm_clk_get_optional()
and clk_prepare_enable() to automatically handle the error.
Fixes:
e4cd854ec487 ("net: korina: Get mdio input clock via common clock framework")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230731090535.21416-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ross Maynard [Mon, 31 Jul 2023 05:42:04 +0000 (15:42 +1000)]
USB: zaurus: Add ID for A-300/B-500/C-700
The SL-A300, B500/5600, and C700 devices no longer auto-load because of
"usbnet: Remove over-broad module alias from zaurus."
This patch adds IDs for those 3 devices.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217632
Fixes:
16adf5d07987 ("usbnet: Remove over-broad module alias from zaurus.")
Signed-off-by: Ross Maynard <bids.7405@bigpond.com>
Cc: stable@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/69b5423b-2013-9fc9-9569-58e707d9bafb@bigpond.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Mon, 31 Jul 2023 07:42:32 +0000 (10:42 +0300)]
net: ll_temac: fix error checking of irq_of_parse_and_map()
Most kernel functions return negative error codes but some irq functions
return zero on error. In this code irq_of_parse_and_map(), returns zero
and platform_get_irq() returns negative error codes. We need to handle
both cases appropriately.
Fixes:
8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/3d0aef75-06e0-45a5-a2a6-2cc4738d4143@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiko Carstens [Mon, 31 Jul 2023 18:39:26 +0000 (20:39 +0200)]
s390/ptrace: add missing linux/const.h include
Adrian Reber reported the following CRIU build bug after
commit
b8af5999779d ("s390/ptrace: make all psw related
defines also available for asm"):
compel/arch/s390/src/lib/infect.c: In function 'arch_can_dump_task':
compel/arch/s390/src/lib/infect.c:523:25: error: 'UL' undeclared (first use in this function)
523 | if (psw->mask & PSW_MASK_RI) {
| ^~~~~~~~~~~
Add the missing linux/const.h include to fix this.
Reported-by: Adrian Reber <areber@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2225745
Link: https://github.com/checkpoint-restore/criu/pull/2232
Tested-by: Adrian Reber <areber@redhat.com>
Fixes:
b8af5999779d ("s390/ptrace: make all psw related defines also available for asm")
Link: https://lore.kernel.org/r/20230731183926.330932-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Kees Cook [Fri, 28 Jul 2023 23:13:02 +0000 (16:13 -0700)]
wifi: ray_cs: Replace 1-element array with flexible array
The trailing array member of struct tx_buf was defined as a 1-element
array, but used as a flexible array. This was resulting in build warnings:
In function 'fortify_memset_chk',
inlined from 'memset_io' at /kisskb/src/arch/mips/include/asm/io.h:486:2,
inlined from 'build_auth_frame' at /kisskb/src/drivers/net/wireless/legacy/ray_cs.c:2697:2:
/kisskb/src/include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning:
detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
493 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace it with an actual flexible array. Binary difference comparison
shows a single change in output:
│ drivers/net/wireless/legacy/ray_cs.c:883
│ lea 0x1c(%rbp),%r13d
│ - cmp $0x7c3,%r13d
│ + cmp $0x7c4,%r13d
This is from:
if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) {
specifically:
#define TX_BUF_SIZE (2048 - sizeof(struct tx_msg))
This appears to have been originally buggy, so the change is correct.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/
88f83d73-781d-bdc-126-
aa629cb368c@linux-m68k.org
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230728231245.never.309-kees@kernel.org
Gao Xiang [Tue, 1 Aug 2023 01:47:37 +0000 (09:47 +0800)]
erofs: drop unnecessary WARN_ON() in erofs_kill_sb()
Previously, .kill_sb() will be called only after fill_super fails.
It will be changed [1].
Besides, checking for s_magic in erofs_kill_sb() is unnecessary from
any point of view. Let's get rid of it now.
[1] https://lore.kernel.org/r/
20230731-flugbereit-wohnlage-
78acdf95ab7e@brauner
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230801014737.28614-1-hsiangkao@linux.alibaba.com
Gao Xiang [Wed, 19 Jul 2023 06:54:59 +0000 (14:54 +0800)]
erofs: fix wrong primary bvec selection on deduplicated extents
When handling deduplicated compressed data, there can be multiple
decompressed extents pointing to the same compressed data in one shot.
In such cases, the bvecs which belong to the longest extent will be
selected as the primary bvecs for real decompressors to decode and the
other duplicated bvecs will be directly copied from the primary bvecs.
Previously, only relative offsets of the longest extent were checked to
decompress the primary bvecs. On rare occasions, it can be incorrect
if there are several extents with the same start relative offset.
As a result, some short bvecs could be selected for decompression and
then cause data corruption.
For example, as Shijie Sun reported off-list, considering the following
extents of a file:
117: 903345.. 915250 | 11905 : 385024.. 389120 | 4096
...
119: 919729.. 930323 | 10594 : 385024.. 389120 | 4096
...
124: 968881.. 980786 | 11905 : 385024.. 389120 | 4096
The start relative offset is the same: 2225, but extent 119 (919729..
930323) is shorter than the others.
Let's restrict the bvec length in addition to the start offset if bvecs
are not full.
Reported-by: Shijie Sun <sunshijie@xiaomi.com>
Fixes:
5c2a64252c5d ("erofs: introduce partial-referenced pclusters")
Tested-by Shijie Sun <sunshijie@xiaomi.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230719065459.60083-1-hsiangkao@linux.alibaba.com
Tomas Glozar [Fri, 28 Jul 2023 06:44:11 +0000 (08:44 +0200)]
bpf: sockmap: Remove preempt_disable in sock_map_sk_acquire
Disabling preemption in sock_map_sk_acquire conflicts with GFP_ATOMIC
allocation later in sk_psock_init_link on PREEMPT_RT kernels, since
GFP_ATOMIC might sleep on RT (see bpf: Make BPF and PREEMPT_RT co-exist
patchset notes for details).
This causes calling bpf_map_update_elem on BPF_MAP_TYPE_SOCKMAP maps to
BUG (sleeping function called from invalid context) on RT kernels.
preempt_disable was introduced together with lock_sk and rcu_read_lock
in commit
99ba2b5aba24e ("bpf: sockhash, disallow bpf_tcp_close and update
in parallel"), probably to match disabled migration of BPF programs, and
is no longer necessary.
Remove preempt_disable to fix BUG in sock_map_update_common on RT.
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/all/20200224140131.461979697@linutronix.de/
Fixes:
99ba2b5aba24 ("bpf: sockhash, disallow bpf_tcp_close and update in parallel")
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230728064411.305576-1-tglozar@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Tue, 1 Aug 2023 03:10:39 +0000 (20:10 -0700)]
Merge branch 'net-sched-bind-logic-fixes-for-cls_fw-cls_u32-and-cls_route'
valis says:
====================
net/sched Bind logic fixes for cls_fw, cls_u32 and cls_route
Three classifiers (cls_fw, cls_u32 and cls_route) always copy
tcf_result struct into the new instance of the filter on update.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
This patch set fixes this issue in all affected classifiers by no longer
copying the tcf_result struct from the old filter.
====================
Link: https://lore.kernel.org/r/20230729123202.72406-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
valis [Sat, 29 Jul 2023 12:32:02 +0000 (08:32 -0400)]
net/sched: cls_route: No longer copy tcf_result on update to avoid use-after-free
When route4_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes:
1109c00547fc ("net: sched: RCU cls_route")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
valis [Sat, 29 Jul 2023 12:32:01 +0000 (08:32 -0400)]
net/sched: cls_fw: No longer copy tcf_result on update to avoid use-after-free
When fw_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes:
e35a8ee5993b ("net: sched: fw use RCU")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
valis [Sat, 29 Jul 2023 12:32:00 +0000 (08:32 -0400)]
net/sched: cls_u32: No longer copy tcf_result on update to avoid use-after-free
When u32_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes:
de5df63228fc ("net: sched: cls_u32 changes to knode must appear atomic to readers")
Reported-by: valis <sec@valis.email>
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau [Mon, 31 Jul 2023 22:37:13 +0000 (15:37 -0700)]
Merge branch 'Two fixes for cpu-map'
Hou Tao says:
====================
The patchset fixes two reported warning in cpu-map when running
xdp_redirect_cpu and some RT threads concurrently. Patch #1 fixes
the warning in __cpu_map_ring_cleanup() when kthread is stopped
prematurely. Patch #2 fixes the warning in __xdp_return() when
there are pending skbs in ptr_ring.
Please see individual patches for more details. And comments are always
welcome.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Hou Tao [Sat, 29 Jul 2023 09:51:07 +0000 (17:51 +0800)]
bpf, cpumap: Handle skb as well when clean up ptr_ring
The following warning was reported when running xdp_redirect_cpu with
both skb-mode and stress-mode enabled:
------------[ cut here ]------------
Incorrect XDP memory type (-
2128176192) usage
WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405
Modules linked in:
CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events __cpu_map_entry_free
RIP: 0010:__xdp_return+0x1e4/0x4a0
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
? __xdp_return+0x1e4/0x4a0
......
xdp_return_frame+0x4d/0x150
__cpu_map_entry_free+0xf9/0x230
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The reason for the warning is twofold. One is due to the kthread
cpu_map_kthread_run() is stopped prematurely. Another one is
__cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs in
ptr_ring as XDP frames.
Prematurely-stopped kthread will be fixed by the preceding patch and
ptr_ring will be empty when __cpu_map_ring_cleanup() is called. But
as the comments in __cpu_map_ring_cleanup() said, handling and freeing
skbs in ptr_ring as well to "catch any broken behaviour gracefully".
Fixes:
11941f8a8536 ("bpf: cpumap: Implement generic cpumap")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Hou Tao [Sat, 29 Jul 2023 09:51:06 +0000 (17:51 +0800)]
bpf, cpumap: Make sure kthread is running before map update returns
The following warning was reported when running stress-mode enabled
xdp_redirect_cpu with some RT threads:
------------[ cut here ]------------
WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135
CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events cpu_map_kthread_stop
RIP: 0010:put_cpu_map_entry+0xda/0x220
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
......
? put_cpu_map_entry+0xda/0x220
cpu_map_kthread_stop+0x41/0x60
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The root cause is the same as commit
436901649731 ("bpf: cpumap: Fix memory
leak in cpu_map_update_elem"). The kthread is stopped prematurely by
kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call
cpu_map_kthread_run() at all but XDP program has already queued some
frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks
the ptr_ring, it will find it was not emptied and report a warning.
An alternative fix is to use __cpu_map_ring_cleanup() to drop these
pending frames or skbs when kthread_stop() returns -EINTR, but it may
confuse the user, because these frames or skbs have been handled
correctly by XDP program. So instead of dropping these frames or skbs,
just make sure the per-cpu kthread is running before
__cpu_map_entry_alloc() returns.
After apply the fix, the error handle for kthread_stop() will be
unnecessary because it will always return 0, so just remove it.
Fixes:
6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Michal Schmidt [Sat, 29 Jul 2023 15:15:16 +0000 (17:15 +0200)]
octeon_ep: initialize mbox mutexes
The two mbox-related mutexes are destroyed in octep_ctrl_mbox_uninit(),
but the corresponding mutex_init calls were missing.
A "DEBUG_LOCKS_WARN_ON(lock->magic != lock)" warning was emitted with
CONFIG_DEBUG_MUTEXES on.
Initialize the two mutexes in octep_ctrl_mbox_init().
Fixes:
577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230729151516.24153-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 28 Jul 2023 20:50:20 +0000 (13:50 -0700)]
bnxt: don't handle XDP in netpoll
Similarly to other recently fixed drivers make sure we don't
try to access XDP or page pool APIs when NAPI budget is 0.
NAPI budget of 0 may mean that we are in netpoll.
This may result in running software IRQs in hard IRQ context,
leading to deadlocks or crashes.
To make sure bnapi->tx_pkts don't get wiped without handling
the events, move clearing the field into the handler itself.
Remember to clear tx_pkts after reset (bnxt_enable_napi())
as it's technically possible that netpoll will accumulate
some tx_pkts and then a reset will happen, leaving tx_pkts
out of sync with reality.
Fixes:
322b87ca55f2 ("bnxt_en: add page_pool support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230728205020.2784844-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafal Rogalski [Fri, 28 Jul 2023 17:12:43 +0000 (10:12 -0700)]
ice: Fix RDMA VSI removal during queue rebuild
During qdisc create/delete, it is necessary to rebuild the queue
of VSIs. An error occurred because the VSIs created by RDMA were
still active.
Added check if RDMA is active. If yes, it disallows qdisc changes
and writes a message in the system logs.
Fixes:
348048e724a0 ("ice: Implement iidc operations")
Signed-off-by: Rafal Rogalski <rafalx.rogalski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230728171243.2446101-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Fri, 28 Jul 2023 16:55:28 +0000 (17:55 +0100)]
sfc: fix field-spanning memcpy in selftest
Add a struct_group for the whole packet body so we can copy it in one
go without triggering FORTIFY_SOURCE complaints.
Fixes:
cf60ed469629 ("sfc: use padding to fix alignment in loopback test")
Fixes:
30c24dd87f3f ("sfc: siena: use padding to fix alignment in loopback test")
Fixes:
1186c6b31ee1 ("sfc: falcon: use padding to fix alignment in loopback test")
Reviewed-by: Andy Moreton <andy.moreton@amd.com>
Tested-by: Andy Moreton <andy.moreton@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230728165528.59070-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Kohn [Thu, 27 Jul 2023 20:00:43 +0000 (20:00 +0000)]
net: usb: qmi_wwan: add Quectel EM05GV2
Add support for Quectel EM05GV2 (G=global) with vendor ID
0x2c7c and product ID 0x030e
Enabling DTR on this modem was necessary to ensure stable operation.
Patch for usb: serial: option: is also in progress.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=030e Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Martin Kohn <m.kohn@welotec.com>
Link: https://lore.kernel.org/r/AM0PR04MB57648219DE893EE04FA6CC759701A@AM0PR04MB5764.eurprd04.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Duoming Zhou [Wed, 26 Jul 2023 08:14:07 +0000 (16:14 +0800)]
net: usb: lan78xx: reorder cleanup operations to avoid UAF bugs
The timer dev->stat_monitor can schedule the delayed work dev->wq and
the delayed work dev->wq can also arm the dev->stat_monitor timer.
When the device is detaching, the net_device will be deallocated. but
the net_device private data could still be dereferenced in delayed work
or timer handler. As a result, the UAF bugs will happen.
One racy situation is shown below:
(Thread 1) | (Thread 2)
lan78xx_stat_monitor() |
... | lan78xx_disconnect()
lan78xx_defer_kevent() | ...
... | cancel_delayed_work_sync(&dev->wq);
schedule_delayed_work() | ...
(wait some time) | free_netdev(net); //free net_device
lan78xx_delayedwork() |
//use net_device private data |
dev-> //use |
Although we use cancel_delayed_work_sync() to cancel the delayed work
in lan78xx_disconnect(), it could still be scheduled in timer handler
lan78xx_stat_monitor().
Another racy situation is shown below:
(Thread 1) | (Thread 2)
lan78xx_delayedwork |
mod_timer() | lan78xx_disconnect()
| cancel_delayed_work_sync()
(wait some time) | if (timer_pending(&dev->stat_monitor))
| del_timer_sync(&dev->stat_monitor);
lan78xx_stat_monitor() | ...
lan78xx_defer_kevent() | free_netdev(net); //free
//use net_device private data|
dev-> //use |
Although we use del_timer_sync() to delete the timer, the function
timer_pending() returns 0 when the timer is activated. As a result,
the del_timer_sync() will not be executed and the timer could be
re-armed.
In order to mitigate this bug, We use timer_shutdown_sync() to shutdown
the timer and then use cancel_delayed_work_sync() to cancel the delayed
work. As a result, the net_device could be deallocated safely.
What's more, the dev->flags is set to EVENT_DEV_DISCONNECT in
lan78xx_disconnect(). But it could still be set to EVENT_STAT_UPDATE
in lan78xx_stat_monitor(). So this patch put the set_bit() behind
timer_shutdown_sync().
Fixes:
77dfff5bb7e2 ("lan78xx: Fix race condition in disconnect handling")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Sat, 29 Jul 2023 11:10:45 +0000 (13:10 +0200)]
dt-bindings: net: mediatek,net: fixup MAC binding
1. Use unevaluatedProperties
It's needed to allow ethernet-controller.yaml properties work correctly.
2. Drop unneeded phy-handle/phy-mode
3. Don't require phy-handle
Some SoCs may use fixed link.
For in-kernel MT7621 DTS files this fixes following errors:
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@
1e100000: mac@0: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@
1e100000: mac@0: 'phy-handle' is a required property
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@
1e100000: mac@1: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
arch/mips/boot/dts/ralink/mt7621-tplink-hc220-g5-v1.dtb: ethernet@
1e100000: mac@1: 'phy-handle' is a required property
From schema: Documentation/devicetree/bindings/net/mediatek,net.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima [Sat, 29 Jul 2023 00:07:05 +0000 (17:07 -0700)]
net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX.
syzkaller found zero division error [0] in div_s64_rem() called from
get_cycle_time_elapsed(), where sched->cycle_time is the divisor.
We have tests in parse_taprio_schedule() so that cycle_time will never
be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed().
The problem is that the types of divisor are different; cycle_time is
s64, but the argument of div_s64_rem() is s32.
syzkaller fed this input and 0x100000000 is cast to s32 to be 0.
@TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000}
We use s64 for cycle_time to cast it to ktime_t, so let's keep it and
set max for cycle_time.
While at it, we prevent overflow in setup_txtime() and add another
test in parse_taprio_schedule() to check if cycle_time overflows.
Also, we add a new tdc test case for this issue.
[0]:
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline]
RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline]
RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344
Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10
RSP: 0018:
ffffc90000acf260 EFLAGS:
00010206
RAX:
177450e0347560cf RBX:
0000000000000000 RCX:
177450e0347560cf
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000100000000
RBP:
0000000000000056 R08:
0000000000000000 R09:
ffffed10020a0934
R10:
ffff8880105049a7 R11:
ffff88806cf3a520 R12:
ffff888010504800
R13:
ffff88800c00d800 R14:
ffff8880105049a0 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff88806cf00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f0edf84f0e8 CR3:
000000000d73c002 CR4:
0000000000770ee0
PKRU:
55555554
Call Trace:
<TASK>
get_packet_txtime net/sched/sch_taprio.c:508 [inline]
taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577
taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658
dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732
__dev_xmit_skb net/core/dev.c:3821 [inline]
__dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_resolve_output net/core/neighbour.c:1552 [inline]
neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532
neigh_output include/net/neighbour.h:544 [inline]
ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135
__ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196
ip6_finish_output net/ipv6/ip6_output.c:207 [inline]
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228
dst_output include/net/dst.h:458 [inline]
NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303
ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508
ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666
addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175
process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597
worker_thread+0x60f/0x1240 kernel/workqueue.c:2748
kthread+0x2fe/0x3f0 kernel/kthread.c:389
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in:
Fixes:
4cfd5779bd6e ("taprio: Add support for txtime-assist mode")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Co-developed-by: Eric Dumazet <edumazet@google.com>
Co-developed-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 27 Jul 2023 16:21:17 +0000 (17:21 +0100)]
nfsd: Fix reading via splice
nfsd_splice_actor() has a clause in its loop that chops up a compound page
into individual pages such that if the same page is seen twice in a row, it
is discarded the second time. This is a problem with the advent of
shmem_splice_read() as that inserts zero_pages into the pipe in lieu of
pages that aren't present in the pagecache.
Fix this by assuming that the last page is being extended only if the
currently stored length + starting offset is not currently on a page
boundary.
This can be tested by NFS-exporting a tmpfs filesystem on the test machine
and truncating it to more than a page in size (eg. truncate -s 8192) and
then reading it by NFS. The first page will be all zeros, but thereafter
garbage will be read.
Note: I wonder if we can ever get a situation now where we get a splice
that gives us contiguous parts of a page in separate actor calls. As NFSD
can only be splicing from a file (I think), there are only three sources of
the page: copy_splice_read(), shmem_splice_read() and file_splice_read().
The first allocates pages for the data it reads, so the problem cannot
occur; the second should never see a partial page; and the third waits for
each page to become available before we're allowed to read from it.
Fixes:
bd194b187115 ("shmem: Implement splice-read")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
cc: Hugh Dickins <hughd@google.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Linus Torvalds [Sun, 30 Jul 2023 20:23:47 +0000 (13:23 -0700)]
Linux 6.5-rc4
Linus Torvalds [Sun, 30 Jul 2023 19:54:31 +0000 (12:54 -0700)]
Merge tag 'spi-fix-v6.5-rc3' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of fixes for the Qualcomm QSPI driver, fixing multiple issues
with the newly added DMA mode - it had a number of issues exposed when
tested in a wider range of use cases, both race condition style issues
and issues with different inputs to those that had been used in test"
* tag 'spi-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized reads
spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes
spi: spi-qcom-qspi: Add DMA_CHAIN_DONE to ALL_IRQS
spi: spi-qcom-qspi: Call dma_wmb() after setting up descriptors
spi: spi-qcom-qspi: Use GFP_ATOMIC flag while allocating for descriptor
spi: spi-qcom-qspi: Ignore disabled interrupts' status in isr
Linus Torvalds [Sun, 30 Jul 2023 19:52:05 +0000 (12:52 -0700)]
Merge tag 'regulator-fix-v6.5-rc3' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes for the the mt6358 driver, fixing error
reporting and a bootstrapping issue"
* tag 'regulator-fix-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6358: Fix incorrect VCN33 sync error message
regulator: mt6358: Sync VCN33_* enable status after checking ID
Linus Torvalds [Sun, 30 Jul 2023 18:57:51 +0000 (11:57 -0700)]
Merge tag 'usb-6.5-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a set of USB driver fixes for 6.5-rc4. Include in here are:
- new USB serial device ids
- dwc3 driver fixes for reported issues
- typec driver fixes for reported problems
- gadget driver fixes
- reverts of some problematic USB changes that went into -rc1
All of these have been in linux-next with no reported problems"
* tag 'usb-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
usb: misc: ehset: fix wrong if condition
usb: dwc3: pci: skip BYT GPIO lookup table for hardwired phy
usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config
usb: gadget: call usb_gadget_check_config() to verify UDC capability
usb: typec: Use sysfs_emit_at when concatenating the string
usb: typec: Iterate pds array when showing the pd list
usb: typec: Set port->pd before adding device for typec_port
usb: typec: qcom: fix return value check in qcom_pmic_typec_probe()
Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()"
Revert "usb: xhci: tegra: Fix error check"
USB: gadget: Fix the memory leak in raw_gadget driver
usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate
Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"
Revert "xhci: add quirk for host controllers that don't update endpoint DCS"
USB: quirks: add quirk for Focusrite Scarlett
usb: xhci-mtk: set the dma max_seg_size
MAINTAINERS: drop invalid usb/cdns3 Reviewer e-mail
usb: dwc3: don't reset device side if dwc3 was configured as host-only
usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner()
usb: ohci-at91: Fix the unhandle interrupt when resume
...
Linus Torvalds [Sun, 30 Jul 2023 18:51:36 +0000 (11:51 -0700)]
Merge tag 'tty-6.5-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and serial driver fixes for 6.5-rc4 for some
reported problems. Included in here is:
- TIOCSTI fix for braille readers
- documentation fix for minor numbers
- MAINTAINERS update for new serial files in -rc1
- minor serial driver fixes for reported problems
All of these have been in linux-next with no reported problems"
* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Preserve original value of DLF register
tty: serial: sh-sci: Fix sleeping in atomic context
serial: sifive: Fix sifive_serial_console_setup() section
Documentation: devices.txt: reconcile serial/ucc_uart minor numers
MAINTAINERS: Update TTY layer for lists and recently added files
tty: n_gsm: fix UAF in gsm_cleanup_mux
TIOCSTI: always enable for CAP_SYS_ADMIN
Linus Torvalds [Sun, 30 Jul 2023 18:47:56 +0000 (11:47 -0700)]
Merge tag 'staging-6.5-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.5-rc4 that resolve
some reported problems. These fixes are:
- fix for an old bug in the r8712 driver
- fbtft driver fix for a spi device
- potential overflow fix in the ks7010 driver
All of these have been in linux-next with no reported problems"
* tag 'staging-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext()
staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVER
staging: r8712: Fix memory leak in _r8712_init_xmit_priv()
Linus Torvalds [Sun, 30 Jul 2023 18:44:00 +0000 (11:44 -0700)]
Merge tag 'char-misc-6.5-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char driver and Documentation fixes from Greg KH:
"Here is a char driver fix and some documentation updates for 6.5-rc4
that contain the following changes:
- sram/genalloc bugfix for reported problem
- security-bugs.rst update based on recent discussions
- embargoed-hardware-issues minor cleanups and then partial revert
for the project/company lists
All of these have been in linux-next for a while with no reported
problems, and the documentation updates have all been reviewed by the
relevant developers"
* tag 'char-misc-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc/genalloc: Name subpools by of_node_full_name()
Documentation: embargoed-hardware-issues.rst: add AMD to the list
Documentation: embargoed-hardware-issues.rst: clean out empty and unused entries
Documentation: security-bugs.rst: clarify CVE handling
Documentation: security-bugs.rst: update preferences when dealing with the linux-distros group
Linus Torvalds [Sun, 30 Jul 2023 18:27:22 +0000 (11:27 -0700)]
Merge tag 'probes-fixes-v6.5-rc3' of git://git./linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- probe-events: add NULL check for some BTF API calls which can return
error code and NULL.
- ftrace selftests: check fprobe and kprobe event correctly. This fixes
a miss condition of the test command.
- kprobes: do not allow probing functions that start with "__cfi_" or
"__pfx_" since those are auto generated for kernel CFI and not
executed.
* tag 'probes-fixes-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Prohibit probing on CFI preamble symbol
selftests/ftrace: Fix to check fprobe event eneblement
tracing/probes: Fix to add NULL check for BTF APIs
Linus Torvalds [Sun, 30 Jul 2023 18:19:08 +0000 (11:19 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Do not register IRQ bypass consumer if posted interrupts not
supported
- Fix missed device interrupt due to non-atomic update of IRR
- Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
- Make VMREAD error path play nice with noinstr
- x86: Acquire SRCU read lock when handling fastpath MSR writes
- Support linking rseq tests statically against glibc 2.35+
- Fix reference count for stats file descriptors
- Detect userspace setting invalid CR0
Non-KVM:
- Remove coccinelle script that has caused multiple confusion
("debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE()
usage", acked by Greg)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
KVM: selftests: Verify stats fd is usable after VM fd has been closed
KVM: selftests: Verify stats fd can be dup()'d and read
KVM: selftests: Verify userspace can create "redundant" binary stats files
KVM: selftests: Explicitly free vcpus array in binary stats test
KVM: selftests: Clean up stats fd in common stats_test() helper
KVM: selftests: Use pread() to read binary stats header
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
KVM: VMX: Make VMREAD error path play nice with noinstr
KVM: x86/irq: Conditionally register IRQ bypass consumer again
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
KVM: x86: check the kvm_cpu_get_interrupt result before using it
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
...
Linus Torvalds [Sun, 30 Jul 2023 18:12:32 +0000 (11:12 -0700)]
Merge tag 'locking_urgent_for_v6.5_rc4' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a rtmutex race condition resulting from sharing of the sort key
between the lock waiters and the PI chain tree (->pi_waiters) of a
task by giving each tree their own sort key
* tag 'locking_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix task->pi_waiters integrity
Linus Torvalds [Sun, 30 Jul 2023 18:05:35 +0000 (11:05 -0700)]
Merge tag 'x86_urgent_for_v6.5_rc4' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- AMD's automatic IBRS doesn't enable cross-thread branch target
injection protection (STIBP) for user processes. Enable STIBP on such
systems.
- Do not delete (but put the ref instead) of AMD MCE error thresholding
sysfs kobjects when destroying them in order not to delete the kernfs
pointer prematurely
- Restore annotation in ret_from_fork_asm() in order to fix kthread
stack unwinding from being marked as unreliable and thus breaking
livepatching
* tag 'x86_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
x86/MCE/AMD: Decrement threshold_bank refcount when removing threshold blocks
x86: Fix kthread unwind
Linus Torvalds [Sun, 30 Jul 2023 17:59:19 +0000 (10:59 -0700)]
Merge tag 'irq_urgent_for_v6.5_rc4' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Work around an erratum on GIC700, where a race between a CPU handling
a wake-up interrupt, a change of affinity, and another CPU going to
sleep can result in a lack of wake-up event on the next interrupt
- Fix the locking required on a VPE for GICv4
- Enable Rockchip 3588001 erratum workaround for RK3588S
- Fix the irq-bcm6345-l1 assumtions of the boot CPU always be the first
CPU in the system
* tag 'irq_urgent_for_v6.5_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
irqchip/gic-v3: Enable Rockchip 3588001 erratum workaround for RK3588S
irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation
irq-bcm6345-l1: Do not assume a fixed block to cpu mapping
Linus Torvalds [Sun, 30 Jul 2023 03:49:13 +0000 (20:49 -0700)]
Merge tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Four small SMB3 client fixes:
- two reconnect fixes (to address the case where non-default
iocharset gets incorrectly overridden at reconnect with the
default charset)
- fix for NTLMSSP_AUTH request setting a flag incorrectly)
- Add missing check for invalid tlink (tree connection) in ioctl"
* tag '6.5-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add missing return value check for cifs_sb_tlink
smb3: do not set NTLMSSP_VERSION flag for negotiate not auth request
cifs: fix charset issue in reconnection
fs/nls: make load_nls() take a const parameter
Linus Torvalds [Sun, 30 Jul 2023 03:40:43 +0000 (20:40 -0700)]
Merge tag 'trace-v6.5-rc3' of git://git./linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix to /sys/kernel/tracing/per_cpu/cpu*/stats read and entries.
If a resize shrinks the buffer it clears the read count to notify
readers that they need to reset. But the read count is also used for
accounting and this causes the numbers to be off. Instead, create a
separate variable to use to notify readers to reset.
- Fix the ref counts of the "soft disable" mode. The wrong value was
used for testing if soft disable mode should be enabled or disable,
but instead, just change the logic to do the enable and disable in
place when the SOFT_MODE is set or cleared.
- Several kernel-doc fixes
- Removal of unused external declarations
* tag 'trace-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix warning in trace_buffered_event_disable()
ftrace: Remove unused extern declarations
tracing: Fix kernel-doc warnings in trace_seq.c
tracing: Fix kernel-doc warnings in trace_events_trigger.c
tracing/synthetic: Fix kernel-doc warnings in trace_events_synth.c
ring-buffer: Fix kernel-doc warnings in ring_buffer.c
ring-buffer: Fix wrong stat of cpu_buffer->read
Sven Joachim [Thu, 27 Jul 2023 20:00:41 +0000 (22:00 +0200)]
arch/*/configs/*defconfig: Replace AUTOFS4_FS by AUTOFS_FS
Commit
a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.
Get rid of it mechanically:
git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'
Also just remove the AUTOFS4_FS config option stub. Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Sat, 29 Jul 2023 17:13:41 +0000 (18:13 +0100)]
Merge branch 'net-data-races'
Eric Dumazet says:
====================
net: annotate data-races
This series was inspired by a syzbot/KCSAN report.
This will later also permit some optimizations,
like not having to lock the socket while reading/writing
some of its fields.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:18 +0000 (15:03 +0000)]
net: annotate data-races around sk->sk_priority
sk_getsockopt() runs locklessly. This means sk->sk_priority
can be read while other threads are changing its value.
Other reads also happen without socket lock being held.
Add missing annotations where needed.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:17 +0000 (15:03 +0000)]
net: add missing data-race annotation for sk_ll_usec
In a prior commit I forgot that sk_getsockopt() reads
sk->sk_ll_usec without holding a lock.
Fixes:
0dbffbb5335a ("net: annotate data race around sk_ll_usec")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:16 +0000 (15:03 +0000)]
net: add missing data-race annotations around sk->sk_peek_off
sk_getsockopt() runs locklessly, thus we need to annotate the read
of sk->sk_peek_off.
While we are at it, add corresponding annotations to sk_set_peek_off()
and unix_set_peek_off().
Fixes:
b9bb53f3836f ("sock: convert sk_peek_offset functions to WRITE_ONCE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:15 +0000 (15:03 +0000)]
net: annotate data-races around sk->sk_mark
sk->sk_mark is often read while another thread could change the value.
Fixes:
4a19ec5800fc ("[NET]: Introducing socket mark socket option.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:14 +0000 (15:03 +0000)]
net: add missing READ_ONCE(sk->sk_rcvbuf) annotation
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvbuf locklessly.
Fixes:
ebb3b78db7bf ("tcp: annotate sk->sk_rcvbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:13 +0000 (15:03 +0000)]
net: add missing READ_ONCE(sk->sk_sndbuf) annotation
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_sndbuf locklessly.
Fixes:
e292f05e0df7 ("tcp: annotate sk->sk_sndbuf lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:12 +0000 (15:03 +0000)]
net: annotate data-races around sk->sk_{rcv|snd}timeo
sk_getsockopt() runs without locks, we must add annotations
to sk->sk_rcvtimeo and sk->sk_sndtimeo.
In the future we might allow fetching these fields before
we lock the socket in TCP fast path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:11 +0000 (15:03 +0000)]
net: add missing READ_ONCE(sk->sk_rcvlowat) annotation
In a prior commit, I forgot to change sk_getsockopt()
when reading sk->sk_rcvlowat locklessly.
Fixes:
eac66402d1c3 ("net: annotate sk->sk_rcvlowat lockless reads")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:10 +0000 (15:03 +0000)]
net: annotate data-races around sk->sk_max_pacing_rate
sk_getsockopt() runs locklessly. This means sk->sk_max_pacing_rate
can be read while other threads are changing its value.
Fixes:
62748f32d501 ("net: introduce SO_MAX_PACING_RATE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:09 +0000 (15:03 +0000)]
net: annotate data-race around sk->sk_txrehash
sk_getsockopt() runs locklessly. This means sk->sk_txrehash
can be read while other threads are changing its value.
Other locations were handled in commit
cb6cd2cec799
("tcp: Change SYN ACK retransmit behaviour to account for rehash")
Fixes:
26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Akhmat Karakotov <hmukos@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 28 Jul 2023 15:03:08 +0000 (15:03 +0000)]
net: annotate data-races around sk->sk_reserved_mem
sk_getsockopt() runs locklessly. This means sk->sk_reserved_mem
can be read while other threads are changing its value.
Add missing annotations where they are needed.
Fixes:
2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Gobert [Thu, 27 Jul 2023 15:33:56 +0000 (17:33 +0200)]
net: gro: fix misuse of CB in udp socket lookup
This patch fixes a misuse of IP{6}CB(skb) in GRO, while calling to
`udp6_lib_lookup2` when handling udp tunnels. `udp6_lib_lookup2` fetch the
device from CB. The fix changes it to fetch the device from `skb->dev`.
l3mdev case requires special attention since it has a master and a slave
device.
Fixes:
a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Reported-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Konstantin Khorenko [Thu, 27 Jul 2023 15:26:09 +0000 (18:26 +0300)]
qed: Fix scheduling in a tasklet while getting stats
Here we've got to a situation when tasklet called usleep_range() in PTT
acquire logic, thus welcome to the "scheduling while atomic" BUG().
BUG: scheduling while atomic: swapper/24/0/0x00000100
[<
ffffffffb41c6199>] schedule+0x29/0x70
[<
ffffffffb41c5512>] schedule_hrtimeout_range_clock+0xb2/0x150
[<
ffffffffb41c55c3>] schedule_hrtimeout_range+0x13/0x20
[<
ffffffffb41c3bcf>] usleep_range+0x4f/0x70
[<
ffffffffc08d3e58>] qed_ptt_acquire+0x38/0x100 [qed]
[<
ffffffffc08eac48>] _qed_get_vport_stats+0x458/0x580 [qed]
[<
ffffffffc08ead8c>] qed_get_vport_stats+0x1c/0xd0 [qed]
[<
ffffffffc08dffd3>] qed_get_protocol_stats+0x93/0x100 [qed]
qed_mcp_send_protocol_stats
case MFW_DRV_MSG_GET_LAN_STATS:
case MFW_DRV_MSG_GET_FCOE_STATS:
case MFW_DRV_MSG_GET_ISCSI_STATS:
case MFW_DRV_MSG_GET_RDMA_STATS:
[<
ffffffffc08e36d8>] qed_mcp_handle_events+0x2d8/0x890 [qed]
qed_int_assertion
qed_int_attentions
[<
ffffffffc08d9490>] qed_int_sp_dpc+0xa50/0xdc0 [qed]
[<
ffffffffb3aa7623>] tasklet_action+0x83/0x140
[<
ffffffffb41d9125>] __do_softirq+0x125/0x2bb
[<
ffffffffb41d560c>] call_softirq+0x1c/0x30
[<
ffffffffb3a30645>] do_softirq+0x65/0xa0
[<
ffffffffb3aa78d5>] irq_exit+0x105/0x110
[<
ffffffffb41d8996>] do_IRQ+0x56/0xf0
Fix this by making caller to provide the context whether it could be in
atomic context flow or not when getting stats from QED driver.
QED driver based on the context provided decide to schedule out or not
when acquiring the PTT BAR window.
We faced the BUG_ON() while getting vport stats, but according to the
code same issue could happen for fcoe and iscsi statistics as well, so
fixing them too.
Fixes:
6c75424612a7 ("qed: Add support for NCSI statistics.")
Fixes:
1e128c81290a ("qed: Add support for hardware offloaded FCoE.")
Fixes:
2f2b2614e893 ("qed: Provide iSCSI statistics to management")
Cc: Sudarsana Kalluru <skalluru@marvell.com>
Cc: David Miller <davem@davemloft.net>
Cc: Manish Chopra <manishc@marvell.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lukasz Majewski [Thu, 27 Jul 2023 08:13:42 +0000 (10:13 +0200)]
net: dsa: microchip: KSZ9477 register regmap alignment to 32 bit boundaries
The commit (SHA1:
5c844d57aa7894154e49cf2fc648bfe2f1aefc1c) provided code
to apply "Module 6: Certain PHY registers must be written as pairs instead
of singly" errata for KSZ9477 as this chip for certain PHY registers
(0xN120 to 0xN13F, N=1,2,3,4,5) must be accesses as 32 bit words instead
of 16 or 8 bit access.
Otherwise, adjacent registers (no matter if reserved or not) are
overwritten with 0x0.
Without this patch some registers (e.g. 0x113c or 0x1134) required for 32
bit access are out of valid regmap ranges.
As a result, following error is observed and KSZ9477 is not properly
configured:
ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO
ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO
ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO
ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0
The solution is to modify regmap_reg_range to allow accesses with 4 bytes
boundaries.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thierry Reding [Wed, 26 Jul 2023 16:32:00 +0000 (18:32 +0200)]
net: stmmac: tegra: Properly allocate clock bulk data
The clock data is an array of struct clk_bulk_data, so make sure to
allocate enough memory.
Fixes:
d8ca113724e7 ("net: stmmac: tegra: Add MGBE support")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 29 Jul 2023 15:59:25 +0000 (08:59 -0700)]
Merge tag 'loongarch-fixes-6.5-1' of git://git./linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some bug fixes for build system, builtin cmdline handling, bpf and
{copy, clear}_user, together with a trivial cleanup"
* tag 'loongarch-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Cleanup __builtin_constant_p() checking for cpu_has_*
LoongArch: BPF: Fix check condition to call lu32id in move_imm()
LoongArch: BPF: Enable bpf_probe_read{, str}() on LoongArch
LoongArch: Fix return value underflow in exception path
LoongArch: Fix CMDLINE_EXTEND and CMDLINE_BOOTLOADER handling
LoongArch: Fix module relocation error with binutils 2.41
LoongArch: Only fiddle with CHECKFLAGS if `need-compiler'
Sean Christopherson [Tue, 13 Jun 2023 20:30:37 +0000 (13:30 -0700)]
KVM: selftests: Expand x86's sregs test to cover illegal CR0 values
Add coverage to x86's set_sregs_test to verify KVM rejects vendor-agnostic
illegal CR0 values, i.e. CR0 values whose legality doesn't depend on the
current VMX mode. KVM historically has neglected to reject bad CR0s from
userspace, i.e. would happily accept a completely bogus CR0 via
KVM_SET_SREGS{2}.
Punt VMX specific subtests to future work, as they would require quite a
bit more effort, and KVM gets coverage for CR0 checks in general through
other means, e.g. KVM-Unit-Tests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230613203037.1968489-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 13 Jun 2023 20:30:36 +0000 (13:30 -0700)]
KVM: VMX: Don't fudge CR0 and CR4 for restricted L2 guest
Stuff CR0 and/or CR4 to be compliant with a restricted guest if and only
if KVM itself is not configured to utilize unrestricted guests, i.e. don't
stuff CR0/CR4 for a restricted L2 that is running as the guest of an
unrestricted L1. Any attempt to VM-Enter a restricted guest with invalid
CR0/CR4 values should fail, i.e. in a nested scenario, KVM (as L0) should
never observe a restricted L2 with incompatible CR0/CR4, since nested
VM-Enter from L1 should have failed.
And if KVM does observe an active, restricted L2 with incompatible state,
e.g. due to a KVM bug, fudging CR0/CR4 instead of letting VM-Enter fail
does more harm than good, as KVM will often neglect to undo the side
effects, e.g. won't clear rmode.vm86_active on nested VM-Exit, and thus
the damage can easily spill over to L1. On the other hand, letting
VM-Enter fail due to bad guest state is more likely to contain the damage
to L2 as KVM relies on hardware to perform most guest state consistency
checks, i.e. KVM needs to be able to reflect a failed nested VM-Enter into
L1 irrespective of (un)restricted guest behavior.
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Fixes:
bddd82d19e2e ("KVM: nVMX: KVM needs to unset "unrestricted guest" VM-execution control in vmcs02 if vmcs12 doesn't set it")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230613203037.1968489-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 13 Jun 2023 20:30:35 +0000 (13:30 -0700)]
KVM: x86: Disallow KVM_SET_SREGS{2} if incoming CR0 is invalid
Reject KVM_SET_SREGS{2} with -EINVAL if the incoming CR0 is invalid,
e.g. due to setting bits 63:32, illegal combinations, or to a value that
isn't allowed in VMX (non-)root mode. The VMX checks in particular are
"fun" as failure to disallow Real Mode for an L2 that is configured with
unrestricted guest disabled, when KVM itself has unrestricted guest
enabled, will result in KVM forcing VM86 mode to virtual Real Mode for
L2, but then fail to unwind the related metadata when synthesizing a
nested VM-Exit back to L1 (which has unrestricted guest enabled).
Opportunistically fix a benign typo in the prototype for is_valid_cr4().
Cc: stable@vger.kernel.org
Reported-by: syzbot+5feef0b9ee9c8e9e5689@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/
000000000000f316b705fdf6e2b4@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230613203037.1968489-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Wed, 26 Jul 2023 20:29:20 +0000 (13:29 -0700)]
Revert "debugfs, coccinelle: check for obsolete DEFINE_SIMPLE_ATTRIBUTE() usage"
Remove coccinelle's recommendation to use DEFINE_DEBUGFS_ATTRIBUTE()
instead of DEFINE_SIMPLE_ATTRIBUTE(). Regardless of whether or not the
"significant overhead" incurred by debugfs_create_file() is actually
meaningful, warnings from the script have led to a rash of low-quality
patches that have sowed confusion and consumed maintainer time for little
to no benefit. There have been no less than four attempts to "fix" KVM,
and a quick search on lore shows that KVM is not alone.
This reverts commit
5103068eaca290f890a30aae70085fac44cecaf6.
Link: https://lore.kernel.org/all/87tu2nbnz3.fsf@mpe.ellerman.id.au
Link: https://lore.kernel.org/all/c0b98151-16b6-6d8f-1765-0f7d46682d60@redhat.com
Link: https://lkml.kernel.org/r/20230706072954.4881-1-duminjie%40vivo.com
Link: https://lore.kernel.org/all/Y2FsbufV00jbyF0B@google.com
Link: https://lore.kernel.org/all/Y2ENJJ1YiSg5oHiy@orome
Link: https://lore.kernel.org/all/7560b350e7b23786ce712118a9a504356ff1cca4.camel@kernel.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230726202920.507756-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 11 Jul 2023 23:01:31 +0000 (16:01 -0700)]
KVM: selftests: Verify stats fd is usable after VM fd has been closed
Verify that VM and vCPU binary stats files are usable even after userspace
has put its last direct reference to the VM. This is a regression test
for a UAF bug where KVM didn't gift the stats files a reference to the VM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230711230131.648752-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 11 Jul 2023 23:01:30 +0000 (16:01 -0700)]
KVM: selftests: Verify stats fd can be dup()'d and read
Expand the binary stats test to verify that a stats fd can be dup()'d
and read, to (very) roughly simulate userspace passing around the file.
Adding the dup() test is primarily an intermediate step towards verifying
that userspace can read VM/vCPU stats before _and_ after userspace closes
its copy of the VM fd; the dup() test itself is only mildly interesting.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230711230131.648752-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 11 Jul 2023 23:01:29 +0000 (16:01 -0700)]
KVM: selftests: Verify userspace can create "redundant" binary stats files
Verify that KVM doesn't artificially limit KVM_GET_STATS_FD to a single
file per VM/vCPU. There's no known use case for getting multiple stats
fds, but it should work, and more importantly creating multiple files will
make it easier to test that KVM correct manages VM refcounts for stats
files.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230711230131.648752-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 11 Jul 2023 23:01:28 +0000 (16:01 -0700)]
KVM: selftests: Explicitly free vcpus array in binary stats test
Explicitly free the all-encompassing vcpus array in the binary stats test
so that the test is consistent with respect to freeing all dynamically
allocated resources (versus letting them be freed on exit).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230711230131.648752-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 11 Jul 2023 23:01:27 +0000 (16:01 -0700)]
KVM: selftests: Clean up stats fd in common stats_test() helper
Move the stats fd cleanup code into stats_test() and drop the
superfluous vm_stats_test() and vcpu_stats_test() helpers in order to
decouple creation of the stats file from consuming/testing the file
(deduping code is a bonus). This will make it easier to test various
edge cases related to stats, e.g. that userspace can dup() a stats fd,
that userspace can have multiple stats files for a singleVM/vCPU, etc.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230711230131.648752-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 11 Jul 2023 23:01:26 +0000 (16:01 -0700)]
KVM: selftests: Use pread() to read binary stats header
Use pread() with an explicit offset when reading the header and the header
name for a binary stats fd so that the common helper and the binary stats
test don't subtly rely on the file effectively being untouched, e.g. to
allow multiple reads of the header, name, etc.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230711230131.648752-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 11 Jul 2023 23:01:25 +0000 (16:01 -0700)]
KVM: Grab a reference to KVM for VM and vCPU stats file descriptors
Grab a reference to KVM prior to installing VM and vCPU stats file
descriptors to ensure the underlying VM and vCPU objects are not freed
until the last reference to any and all stats fds are dropped.
Note, the stats paths manually invoke fd_install() and so don't need to
grab a reference before creating the file.
Fixes:
ce55c049459c ("KVM: stats: Support binary stats retrieval for a VCPU")
Fixes:
fcfe1baeddbf ("KVM: stats: Support binary stats retrieval for a VM")
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Closes: https://lore.kernel.org/all/CAC_GQSr3xzZaeZt85k_RCBd5kfiOve8qXo7a81Cq53LuVQ5r=Q@mail.gmail.com
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-Id: <
20230711230131.648752-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 21 Jul 2023 22:33:52 +0000 (15:33 -0700)]
selftests/rseq: Play nice with binaries statically linked against glibc 2.35+
To allow running rseq and KVM's rseq selftests as statically linked
binaries, initialize the various "trampoline" pointers to point directly
at the expect glibc symbols, and skip the dlysm() lookups if the rseq
size is non-zero, i.e. the binary is statically linked *and* the libc
registered its own rseq.
Define weak versions of the symbols so as not to break linking against
libc versions that don't support rseq in any capacity.
The KVM selftests in particular are often statically linked so that they
can be run on targets with very limited runtime environments, i.e. test
machines.
Fixes:
233e667e1ae3 ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35")
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230721223352.2333911-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 21 Jul 2023 22:43:37 +0000 (15:43 -0700)]
Revert "KVM: SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"
Now that handle_fastpath_set_msr_irqoff() acquires kvm->srcu, i.e. allows
dereferencing memslots during WRMSR emulation, drop the requirement that
"next RIP" is valid. In hindsight, acquiring kvm->srcu would have been a
better fix than avoiding the pastpath, but at the time it was thought that
accessing SRCU-protected data in the fastpath was a one-off edge case.
This reverts commit
5c30e8101e8d5d020b1d7119117889756a6ed713.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230721224337.2335137-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 21 Jul 2023 22:43:36 +0000 (15:43 -0700)]
KVM: x86: Acquire SRCU read lock when handling fastpath MSR writes
Temporarily acquire kvm->srcu for read when potentially emulating WRMSR in
the VM-Exit fastpath handler, as several of the common helpers used during
emulation expect the caller to provide SRCU protection. E.g. if the guest
is counting instructions retired, KVM will query the PMU event filter when
stepping over the WRMSR.
dump_stack+0x85/0xdf
lockdep_rcu_suspicious+0x109/0x120
pmc_event_is_allowed+0x165/0x170
kvm_pmu_trigger_event+0xa5/0x190
handle_fastpath_set_msr_irqoff+0xca/0x1e0
svm_vcpu_run+0x5c3/0x7b0 [kvm_amd]
vcpu_enter_guest+0x2108/0x2580
Alternatively, check_pmu_event_filter() could acquire kvm->srcu, but this
isn't the first bug of this nature, e.g. see commit
5c30e8101e8d ("KVM:
SVM: Skip WRMSR fastpath on VM-Exit if next RIP isn't valid"). Providing
protection for the entirety of WRMSR emulation will allow reverting the
aforementioned commit, and will avoid having to play whack-a-mole when new
uses of SRCU-protected structures are inevitably added in common emulation
helpers.
Fixes:
dfdeda67ea2d ("KVM: x86/pmu: Prevent the PMU from counting disallowed events")
Reported-by: Greg Thelen <gthelen@google.com>
Reported-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230721224337.2335137-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 21 Jul 2023 23:56:37 +0000 (16:56 -0700)]
KVM: VMX: Use vmread_error() to report VM-Fail in "goto" path
Use vmread_error() to report VM-Fail on VMREAD for the "asm goto" case,
now that trampoline case has yet another wrapper around vmread_error() to
play nice with instrumentation.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230721235637.2345403-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Fri, 21 Jul 2023 23:56:36 +0000 (16:56 -0700)]
KVM: VMX: Make VMREAD error path play nice with noinstr
Mark vmread_error_trampoline() as noinstr, and add a second trampoline
for the CONFIG_CC_HAS_ASM_GOTO_OUTPUT=n case to enable instrumentation
when handling VM-Fail on VMREAD. VMREAD is used in various noinstr
flows, e.g. immediately after VM-Exit, and objtool rightly complains that
the call to the error trampoline leaves a no-instrumentation section
without annotating that it's safe to do so.
vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0xc9:
call to vmread_error_trampoline() leaves .noinstr.text section
Note, strictly speaking, enabling instrumentation in the VM-Fail path
isn't exactly safe, but if VMREAD fails the kernel/system is likely hosed
anyways, and logging that there is a fatal error is more important than
*maybe* encountering slightly unsafe instrumentation.
Reported-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230721235637.2345403-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like Xu [Mon, 24 Jul 2023 11:12:36 +0000 (19:12 +0800)]
KVM: x86/irq: Conditionally register IRQ bypass consumer again
As was attempted commit
14717e203186 ("kvm: Conditionally register IRQ
bypass consumer"): "if we don't support a mechanism for bypassing IRQs,
don't register as a consumer. Initially this applied to AMD processors,
but when AVIC support was implemented for assigned devices,
kvm_arch_has_irq_bypass() was always returning true.
We can still skip registering the consumer where enable_apicv
or posted-interrupts capability is unsupported or globally disabled.
This eliminates meaningless dev_info()s when the connect fails
between producer and consumer", such as on Linux hosts where enable_apicv
or posted-interrupts capability is unsupported or globally disabled.
Cc: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Yong He <alexyonghe@tencent.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217379
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <
20230724111236.76570-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peng Hao [Fri, 28 Jul 2023 06:49:48 +0000 (14:49 +0800)]
KVM: X86: Use GFP_KERNEL_ACCOUNT for pid_table in ipiv
The pid_table of ipiv is the persistent memory allocated by
per-vcpu, which should be counted into the memory cgroup.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Message-Id: <CAPm50aLxCQ3TQP2Lhc0PX3y00iTRg+mniLBqNDOC=t9CLxMwwA@mail.gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Wed, 26 Jul 2023 13:59:45 +0000 (16:59 +0300)]
KVM: x86: check the kvm_cpu_get_interrupt result before using it
The code was blindly assuming that kvm_cpu_get_interrupt never returns -1
when there is a pending interrupt.
While this should be true, a bug in KVM can still cause this.
If -1 is returned, the code before this patch was converting it to 0xFF,
and 0xFF interrupt was injected to the guest, which results in an issue
which was hard to debug.
Add WARN_ON_ONCE to catch this case and skip the injection
if this happens again.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20230726135945.260841-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Wed, 26 Jul 2023 13:59:44 +0000 (16:59 +0300)]
KVM: x86: VMX: set irr_pending in kvm_apic_update_irr
When the APICv is inhibited, the irr_pending optimization is used.
Therefore, when kvm_apic_update_irr sets bits in the IRR,
it must set irr_pending to true as well.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20230726135945.260841-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Wed, 26 Jul 2023 13:59:43 +0000 (16:59 +0300)]
KVM: x86: VMX: __kvm_apic_update_irr must update the IRR atomically
If APICv is inhibited, then IPIs from peer vCPUs are done by
atomically setting bits in IRR.
This means, that when __kvm_apic_update_irr copies PIR to IRR,
it has to modify IRR atomically as well.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <
20230726135945.260841-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Masami Hiramatsu (Google) [Tue, 11 Jul 2023 01:50:47 +0000 (10:50 +0900)]
kprobes: Prohibit probing on CFI preamble symbol
Do not allow to probe on "__cfi_" or "__pfx_" started symbol, because those
are used for CFI and not executed. Probing it will break the CFI.
Link: https://lore.kernel.org/all/168904024679.116016.18089228029322008512.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Heiko Carstens [Thu, 27 Jul 2023 18:29:39 +0000 (20:29 +0200)]
KVM: s390: fix sthyi error handling
Commit
9fb6c9b3fea1 ("s390/sthyi: add cache to store hypervisor info")
added cache handling for store hypervisor info. This also changed the
possible return code for sthyi_fill().
Instead of only returning a condition code like the sthyi instruction would
do, it can now also return a negative error value (-ENOMEM). handle_styhi()
was not changed accordingly. In case of an error, the negative error value
would incorrectly injected into the guest PSW.
Add proper error handling to prevent this, and update the comment which
describes the possible return values of sthyi_fill().
Fixes:
9fb6c9b3fea1 ("s390/sthyi: add cache to store hypervisor info")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20230727182939.2050744-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Chengfeng Ye [Thu, 27 Jul 2023 08:56:19 +0000 (08:56 +0000)]
mISDN: hfcpci: Fix potential deadlock on &hc->lock
As &hc->lock is acquired by both timer _hfcpci_softirq() and hardirq
hfcpci_int(), the timer should disable irq before lock acquisition
otherwise deadlock could happen if the timmer is preemtped by the hadr irq.
Possible deadlock scenario:
hfcpci_softirq() (timer)
-> _hfcpci_softirq()
-> spin_lock(&hc->lock);
<irq interruption>
-> hfcpci_int()
-> spin_lock(&hc->lock); (deadlock here)
This flaw was found by an experimental static analysis tool I am developing
for irq-related deadlock.
The tentative patch fixes the potential deadlock by spin_lock_irq()
in timer.
Fixes:
b36b654a7e82 ("mISDN: Create /sys/class/mISDN")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Link: https://lore.kernel.org/r/20230727085619.7419-1-dg573847474@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Sat, 29 Jul 2023 01:31:18 +0000 (18:31 -0700)]
Merge tag 'ata-6.5-rc4' of git://git./linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Fix error message output in the pata_arasan_cf driver (Minjie)
- Fix invalid error return in the pata_octeon_cf driver initialization
(Yingliang)
- Fix a compilation warning due to a missing static function
declaration in the pata_ns87415 driver (Arnd)
- Fix the condition evaluating when to fetch sense data for successful
completions, which should be done only when command duration limits
are being used (Niklas)
* tag 'ata-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: fix when to fetch sense data for successful commands
ata: pata_ns87415: mark ns87560_tf_read static
ata: pata_octeon_cf: fix error return code in octeon_cf_probe()
ata: pata_arasan_cf: Use dev_err_probe() instead dev_err() in data_xfer()
Jamal Hadi Salim [Wed, 26 Jul 2023 13:51:51 +0000 (09:51 -0400)]
net: sched: cls_u32: Fix match key mis-addressing
A match entry is uniquely identified with an "address" or "path" in the
form of: hashtable ID(12b):bucketid(8b):nodeid(12b).
When creating table match entries all of hash table id, bucket id and
node (match entry id) are needed to be either specified by the user or
reasonable in-kernel defaults are used. The in-kernel default for a table id is
0x800(omnipresent root table); for bucketid it is 0x0. Prior to this fix there
was none for a nodeid i.e. the code assumed that the user passed the correct
nodeid and if the user passes a nodeid of 0 (as Mingi Cho did) then that is what
was used. But nodeid of 0 is reserved for identifying the table. This is not
a problem until we dump. The dump code notices that the nodeid is zero and
assumes it is referencing a table and therefore references table struct
tc_u_hnode instead of what was created i.e match entry struct tc_u_knode.
Ming does an equivalent of:
tc filter add dev dummy0 parent 10: prio 1 handle 0x1000 \
protocol ip u32 match ip src 10.0.0.1/32 classid 10:1 action ok
Essentially specifying a table id 0, bucketid 1 and nodeid of zero
Tableid 0 is remapped to the default of 0x800.
Bucketid 1 is ignored and defaults to 0x00.
Nodeid was assumed to be what Ming passed - 0x000
dumping before fix shows:
~$ tc filter ls dev dummy0 parent 10:
filter protocol ip pref 1 u32 chain 0
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor -30591
Note that the last line reports a table instead of a match entry
(you can tell this because it says "ht divisor...").
As a result of reporting the wrong data type (misinterpretting of struct
tc_u_knode as being struct tc_u_hnode) the divisor is reported with value
of -30591. Ming identified this as part of the heap address
(physmap_base is 0xffff8880 (-30591 - 1)).
The fix is to ensure that when table entry matches are added and no
nodeid is specified (i.e nodeid == 0) then we get the next available
nodeid from the table's pool.
After the fix, this is what the dump shows:
$ tc filter ls dev dummy0 parent 10:
filter protocol ip pref 1 u32 chain 0
filter protocol ip pref 1 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 1 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 10:1 not_in_hw
match
0a000001/
ffffffff at 12
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
Reported-by: Mingi Cho <mgcho.minic@gmail.com>
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230726135151.416917-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zheng Yejian [Wed, 26 Jul 2023 09:58:04 +0000 (17:58 +0800)]
tracing: Fix warning in trace_buffered_event_disable()
Warning happened in trace_buffered_event_disable() at
WARN_ON_ONCE(!trace_buffered_event_ref)
Call Trace:
? __warn+0xa5/0x1b0
? trace_buffered_event_disable+0x189/0x1b0
__ftrace_event_enable_disable+0x19e/0x3e0
free_probe_data+0x3b/0xa0
unregister_ftrace_function_probe_func+0x6b8/0x800
event_enable_func+0x2f0/0x3d0
ftrace_process_regex.isra.0+0x12d/0x1b0
ftrace_filter_write+0xe6/0x140
vfs_write+0x1c9/0x6f0
[...]
The cause of the warning is in __ftrace_event_enable_disable(),
trace_buffered_event_enable() was called once while
trace_buffered_event_disable() was called twice.
Reproduction script show as below, for analysis, see the comments:
```
#!/bin/bash
cd /sys/kernel/tracing/
# 1. Register a 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was set;
# 2) trace_buffered_event_enable() was called first time;
echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
# 2. Enable the event registered, then:
# 1) SOFT_DISABLED_BIT was cleared;
# 2) trace_buffered_event_disable() was called first time;
echo 1 > events/initcall/initcall_finish/enable
# 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was
# set again!!!
cat /proc/cmdline
# 4. Unregister the 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was cleared again;
# 2) trace_buffered_event_disable() was called second time!!!
echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
```
To fix it, IIUC, we can change to call trace_buffered_event_enable() at
fist time soft-mode enabled, and call trace_buffered_event_disable() at
last time soft-mode disabled.
Link: https://lore.kernel.org/linux-trace-kernel/20230726095804.920457-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Fixes:
0fc1b09ff1ff ("tracing: Use temp buffer when filtering events")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Sat, 29 Jul 2023 00:19:52 +0000 (17:19 -0700)]
Merge tag 'mm-hotfixes-stable-2023-07-28-15-52' of git://git./linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"11 hotfixes. Five are cc:stable and the remainder address post-6.4
issues or aren't considered serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-07-28-15-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory-failure: fix hardware poison check in unpoison_memory()
proc/vmcore: fix signedness bug in read_from_oldmem()
mailmap: update remaining active codeaurora.org email addresses
mm: lock VMA in dup_anon_vma() before setting ->anon_vma
mm: fix memory ordering for mm_lock_seq and vm_lock_seq
scripts/spelling.txt: remove 'thead' as a typo
mm/pagewalk: fix EFI_PGT_DUMP of espfix area
shmem: minor fixes to splice-read implementation
tmpfs: fix Documentation of noswap and huge mount options
Revert "um: Use swap() to make code cleaner"
mm/damon/core-test: initialise context before test in damon_test_set_attrs()
Linus Torvalds [Sat, 29 Jul 2023 00:14:05 +0000 (17:14 -0700)]
Merge tag 'thermal-6.5-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Constify thermal_zone_device_register() parameters, which was omitted
by mistake, and fix a double free on thermal zone unregistration in
the generic DT thermal driver (Ahmad Fatoum)"
* tag 'thermal-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: of: fix double-free on unregistration
thermal: core: constify params in thermal_zone_device_register
Linus Torvalds [Sat, 29 Jul 2023 00:08:59 +0000 (17:08 -0700)]
Merge tag 'pm-6.5-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix the arming of wakeup IRQs in the generic wakeup IRQ code
(wakeirq), drop unused functions from it and fix up a driver using it
and trying to work around the IRQ arming issue in a questionable way
(Johan Hovold)"
* tag 'pm-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
serial: qcom-geni: drop bogus runtime pm state update
PM: sleep: wakeirq: drop unused enable helpers
PM: sleep: wakeirq: fix wake irq arming
projects / platform / kernel / linux-starfive.git / log