review.tizen.org Git - platform/kernel/linux-starfive.git/log

selftests: forwarding: bridge_mdb: Fix failing test with old libnet

As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.

Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.

Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-16-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: tc_flower_l2_miss: Fix failing test with old libnet

As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.

Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.

Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-15-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: tc_tunnel_key: Make filters more specific

The test installs filters that match on various IP fragments (e.g., no
fragment, first fragment) and expects a certain amount of packets to hit
each filter. This is problematic as the filters are not specific enough
and can match IP packets (e.g., IGMP) generated by the stack, resulting
in failures [1].

Fix by making the filters more specific and match on more fields in the
IP header: Source IP, destination IP and protocol.

[1]
# timeout set to 0
# selftests: net/forwarding: tc_tunnel_key.sh
# TEST: tunnel_key nofrag (skip_hw) [FAIL]
# packet smaller than MTU was not tunneled
# INFO: Could not test offloaded functionality
not ok 89 selftests: net/forwarding: tc_tunnel_key.sh # exit=1

Fixes: 533a89b1940f ("selftests: forwarding: add tunnel_key "nofrag" test case")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-14-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: tc_flower: Relax success criterion

The test checks that filters that match on source or destination MAC
were only hit once. A host can send more than one packet with a given
source or destination MAC, resulting in failures.

Fix by relaxing the success criterion and instead check that the filters
were not hit zero times. Using tc_check_at_least_x_packets() is also an
option, but it is not available in older kernels.

Fixes: 07e5c75184a1 ("selftests: forwarding: Introduce tc flower matching tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-13-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: tc_actions: Use ncat instead of nc

The test relies on 'nc' being the netcat version from the nmap project.
While this seems to be the case on Fedora, it is not the case on Ubuntu,
resulting in failures such as [1].

Fix by explicitly using the 'ncat' utility from the nmap project and the
skip the test in case it is not installed.

[1]
# timeout set to 0
# selftests: net/forwarding: tc_actions.sh
# TEST: gact drop and ok (skip_hw)                                    [ OK ]
# TEST: mirred egress flower redirect (skip_hw)                       [ OK ]
# TEST: mirred egress flower mirror (skip_hw)                         [ OK ]
# TEST: mirred egress matchall mirror (skip_hw)                       [ OK ]
# TEST: mirred_egress_to_ingress (skip_hw)                            [ OK ]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
#         [-m minttl] [-O length] [-P proxy_username] [-p source_port]
#         [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
#         [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
#         [destination] [port]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
#         [-m minttl] [-O length] [-P proxy_username] [-p source_port]
#         [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
#         [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
#         [destination] [port]
# TEST: mirred_egress_to_ingress_tcp (skip_hw)                        [FAIL]
#       server output check failed
# INFO: Could not test offloaded functionality
not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1

Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-12-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: ethtool_mm: Skip when MAC Merge is not supported

MAC Merge cannot be tested with veth pairs, resulting in failures:

# ./ethtool_mm.sh
[...]
TEST: Manual configuration with verification: swp1 to swp2 [FAIL]
Verification did not succeed

Fix by skipping the test when the interfaces do not support MAC Merge.

Fixes: e6991384ace5 ("selftests: forwarding: add a test for MAC Merge layer")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-11-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: hw_stats_l3_gre: Skip when using veth pairs

Layer 3 hardware stats cannot be used when the underlying interfaces are
veth pairs, resulting in failures:

# ./hw_stats_l3_gre.sh
TEST: ping gre flat                                                 [ OK ]
TEST: Test rx packets:                                              [FAIL]
         Traffic not reflected in the counter: 0 -> 0
TEST: Test tx packets:                                              [FAIL]
         Traffic not reflected in the counter: 0 -> 0

Fix by skipping the test when used with veth pairs.

Fixes: 813f97a26860 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-10-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: ethtool_extended_state: Skip when using veth pairs

Ethtool extended state cannot be tested with veth pairs, resulting in
failures:

# ./ethtool_extended_state.sh
TEST: Autoneg, No partner detected [FAIL]
Expected "Autoneg", got "Link detected: no"
[...]

Fix by skipping the test when used with veth pairs.

Fixes: 7d10bcce98cd ("selftests: forwarding: Add tests for ethtool extended state")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: ethtool: Skip when using veth pairs

Auto-negotiation cannot be tested with veth pairs, resulting in
failures:

# ./ethtool.sh
TEST: force of same speed autoneg off [FAIL]
error in configuration. swp1 speed Not autoneg off
[...]

Fix by skipping the test when used with veth pairs.

Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: Add a helper to skip test when using veth pairs

A handful of tests require physical loopbacks to be used instead of veth
pairs. Add a helper that these tests will invoke in order to be skipped
when executed with veth pairs.

Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: Set default IPv6 traceroute utility

The test uses the 'TROUTE6' environment variable to encode the name of
the IPv6 traceroute utility. By default (without a configuration file),
this variable is not set, resulting in failures:

# ./ip6_forward_instats_vrf.sh
TEST: ping6                                                         [ OK ]
TEST: Ip6InTooBigErrors                                             [ OK ]
TEST: Ip6InHdrErrors                                                [FAIL]
TEST: Ip6InAddrErrors                                               [ OK ]
TEST: Ip6InDiscards                                                 [ OK ]

Fix by setting a default utility name and skip the test if the utility
is not present.

Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: bridge_mdb_max: Check iproute2 version

The selftest relies on iproute2 changes present in version 6.3, but the
test does not check for it, resulting in errors:

# ./bridge_mdb_max.sh
  INFO: 802.1d tests
  TEST: cfg4: port: ngroups reporting                                 [FAIL]
          Number of groups was null, now is null, but 5 expected
  TEST: ctl4: port: ngroups reporting                                 [FAIL]
          Number of groups was null, now is null, but 5 expected
  TEST: cfg6: port: ngroups reporting                                 [FAIL]
          Number of groups was null, now is null, but 5 expected
  [...]

Fix by skipping the test if iproute2 is too old.

Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: bridge_mdb: Check iproute2 version

The selftest relies on iproute2 changes present in version 6.3, but the
test does not check for it, resulting in error:

# ./bridge_mdb.sh

INFO: # Host entries configuration tests
TEST: Common host entries configuration tests (IPv4)                [FAIL]
         Managed to add IPv4 host entry with a filter mode
TEST: Common host entries configuration tests (IPv6)                [FAIL]
         Managed to add IPv6 host entry with a filter mode
TEST: Common host entries configuration tests (L2)                  [FAIL]
         Managed to add L2 host entry with a filter mode

INFO: # Port group entries configuration tests - (*, G)
Command "replace" is unknown, try "bridge mdb help".
[...]

Fix by skipping the test if iproute2 is too old.

Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: Switch off timeout

The default timeout for selftests is 45 seconds, but it is not enough
for forwarding selftests which can takes minutes to finish depending on
the number of tests cases:

# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# TEST: IGMPv2 report 239.10.10.10                                    [ OK ]
# TEST: IGMPv2 leave 239.10.10.10                                     [ OK ]
# TEST: IGMPv3 report 239.10.10.10 is_include                         [ OK ]
# TEST: IGMPv3 report 239.10.10.10 include -> allow                   [ OK ]
#
not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds

Fix by switching off the timeout and setting it to 0. A similar change
was done for BPF selftests in commit 6fc5916cc256 ("selftests: bpf:
Switch off timeout").

Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/8d149f8c-818e-d141-a0ce-a6bae606bc22@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: forwarding: Skip test when no interfaces are specified

As explained in [1], the forwarding selftests are meant to be run with
either physical loopbacks or veth pairs. The interfaces are expected to
be specified in a user-provided forwarding.config file or as command
line arguments. By default, this file is not present and the tests fail:

# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
[...]
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# Command line is not complete. Try option "help"
# Failed to create netif
not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1
[...]

Fix by skipping a test if interfaces are not provided either via the
configuration file or command line arguments.

# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
[...]
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# SKIP: Cannot create interface. Name not specified
ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP

[1] tools/testing/selftests/net/forwarding/README

Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/856d454e-f83c-20cf-e166-6dc06cbc1543@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: add missing family to tcp_set_ca_state() tracepoint

Before this code is copied, add the missing family, as we did in
commit 3dd344ea84e1 ("net: tracepoint: exposing sk_family in all tcp:tracepoints")

Fixes: 15fcdf6ae116 ("tcp: Add tracepoint for tcp_set_ca_state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ping Gan <jacky_gam_2001@163.com>
Cc: Manjusaka <me@manjusaka.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230808084923.2239142-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'nexthop-nexthop-dump-fixes'

Ido Schimmel says:

====================
nexthop: Nexthop dump fixes

Patches #1 and #3 fix two problems related to nexthops and nexthop
buckets dump, respectively. Patch #2 is a preparation for the third
patch.

The pattern described in these patches of splitting the NLMSG_DONE to a
separate response is prevalent in other rtnetlink dump callbacks. I
don't know if it's because I'm missing something or if this was done
intentionally to ensure the message is delivered to user space. After
commit 0642840b8bb0 ("af_netlink: ensure that NLMSG_DONE never fails in
dumps") this is no longer necessary and I can improve these dump
callbacks assuming this analysis is correct.

No regressions in existing tests:

# ./fib_nexthops.sh
[...]
Tests passed: 230
Tests failed: 0
====================

Link: https://lore.kernel.org/r/20230808075233.3337922-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nexthop: Fix infinite nexthop bucket dump when using maximum nexthop ID

A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.

The nexthop bucket dump callback always returns a positive number if
nexthop buckets were filled in the provided skb, even if the dump is
complete. This means that a dump will span at least two recvmsg() calls
as long as nexthop buckets are present. In the last recvmsg() call the
dump callback will not fill in any nexthop buckets because the previous
call indicated that the dump should restart from the last dumped nexthop
ID plus one.

# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
id 10 index 0 idle_time 6.66 nhid 1
id 10 index 1 idle_time 6.66 nhid 1
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++

This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:

# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# ip nexthop bucket
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
[...]

Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses:

# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
id 4294967295 index 0 idle_time 6.61 nhid 1
id 4294967295 index 1 idle_time 6.61 nhid 1
+++ exited with 0 +++

Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.

Add a test that fails before the fix:

# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]

And passes after it:

# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]

Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nexthop: Make nexthop bucket dump more efficient

rtm_dump_nexthop_bucket_nh() is used to dump nexthop buckets belonging
to a specific resilient nexthop group. The function returns a positive
return code (the skb length) upon both success and failure.

The above behavior is problematic. When a complete nexthop bucket dump
is requested, the function that walks the different nexthops treats the
non-zero return code as an error. This causes buckets belonging to
different resilient nexthop groups to be dumped using different buffers
even if they can all fit in the same buffer:

# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 1
# ip nexthop add id 20 group 1 type resilient buckets 1
# strace -e recvmsg -s 0 ip nexthop bucket
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64
id 10 index 0 idle_time 10.27 nhid 1
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64
id 20 index 0 idle_time 6.44 nhid 1
[...]

Fix by only returning a non-zero return code when an error occurred and
restarting the dump from the bucket index we failed to fill in. This
allows buckets belonging to different resilient nexthop groups to be
dumped using the same buffer:

# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 1
# ip nexthop add id 20 group 1 type resilient buckets 1
# strace -e recvmsg -s 0 ip nexthop bucket
[...]
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
id 10 index 0 idle_time 30.21 nhid 1
id 20 index 0 idle_time 26.7 nhid 1
[...]

While this change is more of a performance improvement change than an
actual bug fix, it is a prerequisite for a subsequent patch that does
fix a bug.

Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nexthop: Fix infinite nexthop dump when using maximum nexthop ID

A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.

The nexthop dump callback always returns a positive number if nexthops
were filled in the provided skb, even if the dump is complete. This
means that a dump will span at least two recvmsg() calls as long as
nexthops are present. In the last recvmsg() call the dump callback will
not fill in any nexthops because the previous call indicated that the
dump should restart from the last dumped nexthop ID plus one.

# ip nexthop add id 1 blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36
id 1 blackhole
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++

This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:

# ip nexthop add id $((2**32-1)) blackhole
# ip nexthop
id 4294967295 blackhole
id 4294967295 blackhole
[...]

Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response:

# ip nexthop add id $((2**32-1)) blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56
id 4294967295 blackhole
+++ exited with 0 +++

Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.

Add a test that fails before the fix:

# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]

And passes after it:

# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]

Fixes: ab84be7e54fc ("net: Initial nexthop code")
Reported-by: Petr Machata <petrm@nvidia.com>
Closes: https://lore.kernel.org/netdev/87sf91enuf.fsf@nvidia.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

vlan: Fix VLAN 0 memory leak

The referenced commit intended to fix memleak of VLAN 0 that is implicitly
created on devices with NETIF_F_HW_VLAN_CTAG_FILTER feature. However, it
doesn't take into account that the feature can be re-set during the
netdevice lifetime which will cause memory leak if feature is disabled
during the device deletion as illustrated by [0]. Fix the leak by
unconditionally deleting VLAN 0 on NETDEV_DOWN event.

[0]:
> modprobe 8021q
> ip l set dev eth2 up
> ethtool -K eth2 rx-vlan-filter off
> modprobe -r mlx5_ib
> modprobe -r mlx5_core
> cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888103dcd900 (size 256):
  comm "ip", pid 1490, jiffies 4294907305 (age 325.364s)
  hex dump (first 32 bytes):
    00 80 5d 03 81 88 ff ff 00 00 00 00 00 00 00 00  ..].............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000899f3bb9>] kmalloc_trace+0x25/0x80
    [<000000002889a7a2>] vlan_vid_add+0xa0/0x210
    [<000000007177800e>] vlan_device_event+0x374/0x760 [8021q]
    [<000000009a0716b1>] notifier_call_chain+0x35/0xb0
    [<00000000bbf3d162>] __dev_notify_flags+0x58/0xf0
    [<0000000053d2b05d>] dev_change_flags+0x4d/0x60
    [<00000000982807e9>] do_setlink+0x28d/0x10a0
    [<0000000058c1be00>] __rtnl_newlink+0x545/0x980
    [<00000000e66c3bd9>] rtnl_newlink+0x44/0x70
    [<00000000a2cc5970>] rtnetlink_rcv_msg+0x29c/0x390
    [<00000000d307d1e4>] netlink_rcv_skb+0x54/0x100
    [<00000000259d16f9>] netlink_unicast+0x1f6/0x2c0
    [<000000007ce2afa1>] netlink_sendmsg+0x232/0x4a0
    [<00000000f3f4bb39>] sock_sendmsg+0x38/0x60
    [<000000002f9c0624>] ____sys_sendmsg+0x1e3/0x200
    [<00000000d6ff5520>] ___sys_sendmsg+0x80/0xc0
unreferenced object 0xffff88813354fde0 (size 32):
  comm "ip", pid 1490, jiffies 4294907305 (age 325.364s)
  hex dump (first 32 bytes):
    a0 d9 dc 03 81 88 ff ff a0 d9 dc 03 81 88 ff ff  ................
    81 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000899f3bb9>] kmalloc_trace+0x25/0x80
    [<000000002da64724>] vlan_vid_add+0xdf/0x210
    [<000000007177800e>] vlan_device_event+0x374/0x760 [8021q]
    [<000000009a0716b1>] notifier_call_chain+0x35/0xb0
    [<00000000bbf3d162>] __dev_notify_flags+0x58/0xf0
    [<0000000053d2b05d>] dev_change_flags+0x4d/0x60
    [<00000000982807e9>] do_setlink+0x28d/0x10a0
    [<0000000058c1be00>] __rtnl_newlink+0x545/0x980
    [<00000000e66c3bd9>] rtnl_newlink+0x44/0x70
    [<00000000a2cc5970>] rtnetlink_rcv_msg+0x29c/0x390
    [<00000000d307d1e4>] netlink_rcv_skb+0x54/0x100
    [<00000000259d16f9>] netlink_unicast+0x1f6/0x2c0
    [<000000007ce2afa1>] netlink_sendmsg+0x232/0x4a0
    [<00000000f3f4bb39>] sock_sendmsg+0x38/0x60
    [<000000002f9c0624>] ____sys_sendmsg+0x1e3/0x200
    [<00000000d6ff5520>] ___sys_sendmsg+0x80/0xc0

Fixes: efc73f4bbc23 ("net: Fix memory leak - vlan_info struct")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20230808093521.1468929-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'smc-fixes'

Gerd Bayer says:

====================
net/smc: Fix effective buffer size

commit 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock
and make them tunable") started to derive the effective buffer size for
SMC connections inconsistently in case a TCP fallback was used and
memory consumption of SMC with the default settings was doubled when
a connection negotiated SMC. That was not what we want.

This series consolidates the resulting effective buffer size that is
used with SMC sockets, which is based on Jan Karcher's effort (see
[1]). For all TCP exchanges (in particular in case of a fall back when
no SMC connection was possible) the values from net.ipv4.tcp_[rw]mem
are used. If SMC succeeds in establishing a SMC connection, the newly
introduced values from net.smc.[rw]mem are used.

net.smc.[rw]mem is initialized to 64kB, respectively. Internal test
have show this to be a good compromise between throughput/latency
and memory consumption. Also net.smc.[rw]mem is now decoupled completely
from any tuning through net.ipv4.tcp_[rw]mem.

If a user chose to tune a socket's receive or send buffer size with
setsockopt, this tuning is now consistently applied to either fall-back
TCP or proper SMC connections over the socket.

Thanks,
Gerd

v2 - v3:
- Rebase to and resolve conflict of second patch with latest net/master.
v1 - v2:
- In second patch, use sock_net() helper as suggested by Tony and demanded
by kernel test robot.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: Use correct buffer sizes when switching between TCP and SMC

Tuning of the effective buffer size through setsockopts was working for
SMC traffic only but not for TCP fall-back connections even before
commit 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and
make them tunable"). That change made it apparent that TCP fall-back
connections would use net.smc.[rw]mem as buffer size instead of
net.ipv4_tcp_[rw]mem.

Amend the code that copies attributes between the (TCP) clcsock and the
SMC socket and adjust buffer sizes appropriately:
- Copy over sk_userlocks so that both sockets agree on whether tuning
  via setsockopt is active.
- When falling back to TCP use sk_sndbuf or sk_rcvbuf as specified with
  setsockopt. Otherwise, use the sysctl value for TCP/IPv4.
- Likewise, use either values from setsockopt or from sysctl for SMC
  (duplicated) on successful SMC connect.

In smc_tcp_listen_work() drop the explicit copy of buffer sizes as that
is taken care of by the attribute copy.

Fixes: 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable")
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: Fix setsockopt and sysctl to specify same buffer size again

Commit 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock
and make them tunable") introduced the net.smc.rmem and net.smc.wmem
sysctls to specify the size of buffers to be used for SMC type
connections. This created a regression for users that specified the
buffer size via setsockopt() as the effective buffer size was now
doubled.

Re-introduce the division by 2 in the SMC buffer create code and level
this out by duplicating the net.smc.[rw]mem values used for initializing
sk_rcvbuf/sk_sndbuf at socket creation time. This gives users of both
methods (setsockopt or sysctl) the effective buffer size that they
expect.

Initialize net.smc.[rw]mem from its own constant of 64kB, respectively.
Internal performance tests show that this value is a good compromise
between throughput/latency and memory consumption. Also, this decouples
it from any tuning that was done to net.ipv4.tcp_[rw]mem[1] before the
module for SMC protocol was loaded. Check that no more than INT_MAX / 2
is assigned to net.smc.[rw]mem, in order to avoid any overflow condition
when that is doubled for use in sk_sndbuf or sk_rcvbuf.

While at it, drop the confusing sk_buf_size variable from
__smc_buf_create and name "compressed" buffer size variables more
consistently.

Background:

Before the commit mentioned above, SMC's buffer allocator in
__smc_buf_create() always used half of the sockets' sk_rcvbuf/sk_sndbuf
value as initial value to search for appropriate buffers. If the search
resorted to using a bigger buffer when all buffers of the specified
size were busy, the duplicate of the used effective buffer size is
stored back to sk_rcvbuf/sk_sndbuf.

When available, buffers of exactly the size that a user had specified as
input to setsockopt() were used, despite setsockopt()'s documentation in
"man 7 socket" talking of a mandatory duplication:

[...]
       SO_SNDBUF
              Sets  or  gets the maximum socket send buffer in bytes.
              The kernel doubles this value (to allow space for book‐
              keeping  overhead)  when it is set using setsockopt(2),
              and this doubled value is  returned  by  getsockopt(2).
              The     default     value     is     set     by     the
              /proc/sys/net/core/wmem_default file  and  the  maximum
              allowed value is set by the /proc/sys/net/core/wmem_max
              file.  The minimum (doubled) value for this  option  is
              2048.
[...]

Fixes: 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable")
Co-developed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Jan Karcher <jaka@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'enetc-probe-fix'

Vladimir Oltean says:

====================
Fix ENETC probing after 6fffbc7ae137 ("PCI: Honor firmware's device disabled status")

I'm not sure who should take this patch set (net maintainers or PCI
maintainers). Everyone could pick up just their part, and that would
work (no compile time dependencies). However, the entire series needs
ACK from both sides and Rob for sure.

v1 at:
https://lore.kernel.org/netdev/20230521115141.2384444-1-vladimir.oltean@nxp.com/
====================

Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: enetc: remove of_device_is_available() handling

Since commit 6fffbc7ae137 ("PCI: Honor firmware's device disabled
status"), this is redundant and does nothing, because enetc_pf_probe()
no longer even gets called.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: enetc: reimplement RFS/RSS memory clearing as PCI quirk

The workaround implemented in commit 3222b5b613db ("net: enetc:
initialize RFS/RSS memories for unused ports too") is no longer
effective after commit 6fffbc7ae137 ("PCI: Honor firmware's device
disabled status"). Thus, it has introduced a regression and we see AER
errors being reported again:

$ ip link set sw2p0 up && dhclient -i sw2p0 && ip addr show sw2p0
fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode
fsl_enetc 0000:00:00.2 eno2: Link is Up - 2.5Gbps/Full - flow control rx/tx
mscc_felix 0000:00:00.5 swp2: configuring for fixed/sgmii link mode
mscc_felix 0000:00:00.5 swp2: Link is Up - 1Gbps/Full - flow control off
sja1105 spi2.2 sw2p0: configuring for phy/rgmii-id link mode
sja1105 spi2.2 sw2p0: Link is Up - 1Gbps/Full - flow control off
pcieport 0000:00:1f.0: AER: Multiple Corrected error received: 0000:00:00.0
pcieport 0000:00:1f.0: AER: can't find device of ID0000

Rob's suggestion is to reimplement the enetc driver workaround as a
PCI fixup, and to modify the PCI core to run the fixups for all PCI
functions. This change handles the first part.

We refactor the common code in enetc_psi_create() and enetc_psi_destroy(),
and use the PCI fixup only for those functions for which enetc_pf_probe()
won't get called. This avoids some work being done twice for the PFs
which are enabled.

Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PCI: move OF status = "disabled" detection to dev->match_driver

The blamed commit has broken probing on
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi when &enetc_port0
(PCI function 0) has status = "disabled".

Background: pci_scan_slot() has logic to say that if the function 0 of a
device is absent, the entire device is absent and we can skip the other
functions entirely. Traditionally, this has meant that
pci_bus_read_dev_vendor_id() returns an error code for that function.

However, since the blamed commit, there is an extra confounding
condition: function 0 of the device exists and has a valid vendor id,
but it is disabled in the device tree. In that case, pci_scan_slot()
would incorrectly skip the entire device instead of just that function.

In the case of NXP LS1028A, status = "disabled" does not mean that the
PCI function's config space is not available for reading. It is, but the
Ethernet port is just not functionally useful with a particular SerDes
protocol configuration (0x9999) due to pinmuxing constraints of the Soc.
So, pci_scan_slot() skips all other functions on the ENETC ECAM
(enetc_port1, enetc_port2, enetc_mdio_pf3 etc) when just enetc_port0 had
to not be probed.

There is an additional regression introduced by the change, caused by
its fundamental premise. The enetc driver needs to run code for all PCI
functions, regardless of whether they're enabled or not in the device
tree. That is no longer possible if the driver's probe function is no
longer called. But Rob recommends that we move the of_device_is_available()
detection to dev->match_driver, and this makes the PCI fixups still run
on all functions, while just probing drivers for those functions that
are enabled. So, a separate change in the enetc driver will have to move
the workarounds to a PCI fixup.

Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

iavf: fix potential races for FDIR filters

Add fdir_fltr_lock locking in unprotected places.

The change in iavf_fdir_is_dup_fltr adds a spinlock around a loop which
iterates over all filters and looks for a duplicate. The filter can be
removed from list and freed from memory at the same time it's being
compared. All other places where filters are deleted are already
protected with spinlock.

The remaining changes protect adapter->fdir_active_fltr variable so now
all its uses are under a spinlock.

Fixes: 527691bf0682 ("iavf: Support IPv4 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807205011.3129224-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

igc: Add lock to safeguard global Qbv variables

Access to shared variables through hrtimer requires locking in order
to protect the variables because actions to write into these variables
(oper_gate_closed, admin_gate_closed, and qbv_transition) might potentially
occur simultaneously. This patch provides a locking mechanisms to avoid
such scenarios.

Fixes: 175c241288c0 ("igc: Fix TX Hang issue when QBV Gate is closed")
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230807205129.3129346-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mlx5-fixes-2023-08-07' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2023-08-07

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-08-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Add capability check for vnic counters
  net/mlx5: Reload auxiliary devices in pci error handlers
  net/mlx5: Skip clock update work when device is in error state
  net/mlx5: LAG, Check correct bucket when modifying LAG
  net/mlx5e: Unoffload post act rule when handling FIB events
  net/mlx5: Fix devlink controller number for ECVF
  net/mlx5: Allow 0 for total host VFs
  net/mlx5: Return correct EC_VF function ID
  net/mlx5: DR, Fix wrong allocation of modify hdr pattern
  net/mlx5e: TC, Fix internal port memory leak
  net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()
====================

Link: https://lore.kernel.org/r/20230807212607.50883-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'

Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver

There are some bugfix for the HNS3 ethernet driver

v1: https://lore.kernel.org/all/20230728075840.4022760-2-shaojijie@huawei.com/
====================

Link: https://lore.kernel.org/r/20230807113452.474224-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hns3: fix deadlock issue when externel_lb and reset are executed together

When externel_lb and reset are executed together, a deadlock may
occur:
[ 3147.217009] INFO: task kworker/u321:0:7 blocked for more than 120 seconds.
[ 3147.230483] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 3147.238999] task:kworker/u321:0  state:D stack:    0 pid:    7 ppid:     2 flags:0x00000008
[ 3147.248045] Workqueue: hclge hclge_service_task [hclge]
[ 3147.253957] Call trace:
[ 3147.257093]  __switch_to+0x7c/0xbc
[ 3147.261183]  __schedule+0x338/0x6f0
[ 3147.265357]  schedule+0x50/0xe0
[ 3147.269185]  schedule_preempt_disabled+0x18/0x24
[ 3147.274488]  __mutex_lock.constprop.0+0x1d4/0x5dc
[ 3147.279880]  __mutex_lock_slowpath+0x1c/0x30
[ 3147.284839]  mutex_lock+0x50/0x60
[ 3147.288841]  rtnl_lock+0x20/0x2c
[ 3147.292759]  hclge_reset_prepare+0x68/0x90 [hclge]
[ 3147.298239]  hclge_reset_subtask+0x88/0xe0 [hclge]
[ 3147.303718]  hclge_reset_service_task+0x84/0x120 [hclge]
[ 3147.309718]  hclge_service_task+0x2c/0x70 [hclge]
[ 3147.315109]  process_one_work+0x1d0/0x490
[ 3147.319805]  worker_thread+0x158/0x3d0
[ 3147.324240]  kthread+0x108/0x13c
[ 3147.328154]  ret_from_fork+0x10/0x18

In externel_lb process, the hns3 driver call napi_disable()
first, then the reset happen, then the restore process of the
externel_lb will fail, and will not call napi_enable(). When
doing externel_lb again, napi_disable() will be double call,
cause a deadlock of rtnl_lock().

This patch use the HNS3_NIC_STATE_DOWN state to protect the
calling of napi_disable() and napi_enable() in externel_lb
process, just as the usage in ndo_stop() and ndo_start().

Fixes: 04b6ba143521 ("net: hns3: add support for external loopback test")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hns3: add wait until mac link down

In some configure flow of hns3 driver, for example, change mtu, it will
disable MAC through firmware before configuration. But firmware disables
MAC asynchronously. The rx traffic may be not stopped in this case.

So fixes it by waiting until mac link is down.

Fixes: a9775bb64aa7 ("net: hns3: fix set and get link ksettings issue")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hns3: refactor hclge_mac_link_status_wait for interface reuse

Some nic configurations could only be performed after link is down. So this
patch refactor this API for reuse.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hns3: restore user pause configure when disable autoneg

Restore the mac pause state to user configuration when autoneg is disabled

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230807113452.474224-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/unix: use consistent error code in SO_PEERPIDFD

Change the new (unreleased) SO_PEERPIDFD sockopt to return ENODATA
rather than ESRCH if a socket type does not support remote peer-PID
queries.

Currently, SO_PEERPIDFD returns ESRCH when the socket in question is
not an AF_UNIX socket. This is quite unexpected, given that one would
assume ESRCH means the peer process already exited and thus cannot be
found. However, in that case the sockopt actually returns EINVAL (via
pidfd_prepare()). This is rather inconsistent with other syscalls, which
usually return ESRCH if a given PID refers to a non-existant process.

This changes SO_PEERPIDFD to return ENODATA instead. This is also what
SO_PEERGROUPS returns, and thus keeps a consistent behavior across
sockopts.

Note that this code is returned in 2 cases: First, if the socket type is
not AF_UNIX, and secondly if the socket was not yet connected. In both
cases ENODATA seems suitable.

Signed-off-by: David Rheinsberg <david@readahead.eu>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Fixes: 7b26952a91cf ("net: core: add getsockopt SO_PEERPIDFD")
Link: https://lore.kernel.org/r/20230807081225.816199-1-david@readahead.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS: update Claudiu Beznea's email address

Update MAINTAINERS entries with a valid email address as the Microchip
one is no longer valid.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230804050007.235799-1-claudiu.beznea@tuxon.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: marvell: prestera: fix handling IPv4 routes with nhid

Fix handling IPv4 routes referencing a nexthop via its id by replacing
calls to fib_info_nh() with fib_info_nhc().

Trying to add an IPv4 route referencing a nextop via nhid:

    $ ip link set up swp5
    $ ip a a 10.0.0.1/24 dev swp5
    $ ip nexthop add dev swp5 id 20 via 10.0.0.2
    $ ip route add 10.0.1.0/24 nhid 20

triggers warnings when trying to handle the route:

[  528.805763] ------------[ cut here ]------------
[  528.810437] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.820434] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci]
[  528.837485] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G           O       6.4.5 #1
[  528.845178] Hardware name: delta,tn48m-dn (DT)
[  528.849641] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera]
[  528.857352] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  528.864347] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.870135] lr : prestera_k_arb_fib_evt+0xb20/0xd50 [prestera]
[  528.876007] sp : ffff80000b20bc90
[  528.879336] x29: ffff80000b20bc90 x28: 0000000000000000 x27: ffff0001374d3a48
[  528.886510] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800
[  528.893683] x23: ffff000101c89148 x22: ffff000101c89000 x21: ffff000101c89200
[  528.900855] x20: ffff00013641fda0 x19: ffff800009d01088 x18: 0000000000000059
[  528.908027] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000
[  528.915198] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000
[  528.922371] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013d2020
[  528.929543] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 000000001ca72f86
[  528.936715] x5 : 0000000033399ea7 x4 : 0000000000000000 x3 : ffff0001374d3acc
[  528.943886] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80
[  528.951058] Call trace:
[  528.953516]  __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.958952]  __prestera_router_fib_event_work+0x100/0x158 [prestera]
[  528.965348]  process_one_work+0x208/0x488
[  528.969387]  worker_thread+0x4c/0x430
[  528.973068]  kthread+0x120/0x138
[  528.976313]  ret_from_fork+0x10/0x20
[  528.979909] ---[ end trace 0000000000000000 ]---
[  528.984998] ------------[ cut here ]------------
[  528.989645] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.999628] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci]
[  529.016676] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G        W  O       6.4.5 #1
[  529.024368] Hardware name: delta,tn48m-dn (DT)
[  529.028830] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera]
[  529.036539] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  529.043533] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  529.049318] lr : __prestera_k_arb_fc_apply+0x280/0x2f8 [prestera]
[  529.055452] sp : ffff80000b20bc60
[  529.058781] x29: ffff80000b20bc60 x28: 0000000000000000 x27: ffff0001374d3a48
[  529.065953] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800
[  529.073126] x23: ffff000101c89148 x22: ffff000101c89148 x21: ffff00013641fda0
[  529.080299] x20: ffff000101c89000 x19: ffff000101c89020 x18: 0000000000000059
[  529.087471] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000
[  529.094642] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000
[  529.101814] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013cee80
[  529.108985] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 0000000000000018
[  529.116157] x5 : 00000000d3497eb6 x4 : ffff000105604081 x3 : 000000008e979557
[  529.123329] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80
[  529.130501] Call trace:
[  529.132958]  __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  529.138394]  prestera_k_arb_fib_evt+0x6b8/0xd50 [prestera]
[  529.143918]  __prestera_router_fib_event_work+0x100/0x158 [prestera]
[  529.150313]  process_one_work+0x208/0x488
[  529.154348]  worker_thread+0x4c/0x430
[  529.158030]  kthread+0x120/0x138
[  529.161274]  ret_from_fork+0x10/0x20
[  529.164867] ---[ end trace 0000000000000000 ]---

and results in a non offloaded route:

    $ ip route
    10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap
    10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 rt_trap

When creating a route referencing a nexthop via its ID, the nexthop will
be stored in a separate nh pointer instead of the array of nexthops in
the fib_info struct. This causes issues since fib_info_nh() only handles
the nexthops array, but not the separate nh pointer, and will loudly
WARN about it.

In contrast fib_info_nhc() handles both, but returns a fib_nh_common
pointer instead of a fib_nh pointer. Luckily we only ever access fields
from the fib_nh_common parts, so we can just replace all instances of
fib_info_nh() with fib_info_nhc() and access the fields via their
fib_nh_common names.

This allows handling IPv4 routes with an external nexthop, and they now
get offloaded as expected:

    $ ip route
    10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap
    10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 offload rt_offload

Fixes: 396b80cb5cc8 ("net: marvell: prestera: Add neighbour cache accounting")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20230804101220.247515-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail()

Syzkaller reported the following issue:
=======================================
Too BIG xdp->frame_sz = 131072
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline]
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103
...
Call Trace:
<TASK>
bpf_prog_4add87e5301a4105+0x1a/0x1c
__bpf_prog_run include/linux/filter.h:600 [inline]
bpf_prog_run_xdp include/linux/filter.h:775 [inline]
bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721
netif_receive_generic_xdp net/core/dev.c:4807 [inline]
do_xdp_generic+0x35c/0x770 net/core/dev.c:4866
tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919
tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x650/0xe40 fs/read_write.c:584
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe87
("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper
Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the
xdp_init_buff() which all XDP driver use - it's safe to remove this
check. The original intend was to catch cases where XDP drivers have
not been updated to use xdp.frame_sz, but that is not longer a concern
(since xdp_init_buff).

Running the initial syzkaller repro it was discovered that the
contiguous physical memory allocation is used for both xdp paths in
tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also
stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can
work on higher order pages, as long as this is contiguous physical
memory (e.g. a page).

Reported-and-tested-by: syzbot+f817490f5bd20541b90a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000774b9205f1d8a80d@google.com/T/
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a
Link: https://lore.kernel.org/all/20230725155403.796-1-andrew.kanner@gmail.com/T/
Fixes: 43b5169d8355 ("net, xdp: Introduce xdp_init_buff utility routine")
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230803190316.2380231-1-andrew.kanner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers: net: prevent tun_build_skb() to exceed the packet size limit

Using the syzkaller repro with reduced packet size it was discovered
that XDP_PACKET_HEADROOM is not checked in tun_can_build_skb(),
although pad may be incremented in tun_build_skb(). This may end up
with exceeding the PAGE_SIZE limit in tun_build_skb().

Jason Wang <jasowang@redhat.com> proposed to count XDP_PACKET_HEADROOM
always (e.g. without rcu_access_pointer(tun->xdp_prog)) in
tun_can_build_skb() since there's a window during which XDP program
might be attached between tun_can_build_skb() and tun_build_skb().

Fixes: 7df13219d757 ("tun: reserve extra headroom only when XDP is set")
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Link: https://lore.kernel.org/r/20230803185947.2379988-1-andrew.kanner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'wireguard-fixes-for-6-5-rc6'

Jason A. Donenfeld says:

====================
wireguard fixes for 6.5-rc6

Just one patch this time, somewhat late in the cycle:

1) Fix an off-by-one calculation for the maximum node depth size in the
allowedips trie data structure, and also adjust the self-tests to hit
this case so it doesn't regress again in the future.
====================

Link: https://lore.kernel.org/r/20230807132146.2191597-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wireguard: allowedips: expand maximum node depth

In the allowedips self-test, nodes are inserted into the tree, but it
generated an even amount of nodes, but for checking maximum node depth,
there is of course the root node, which makes the total number
necessarily odd. With two few nodes added, it never triggered the
maximum depth check like it should have. So, add 129 nodes instead of
128 nodes, and do so with a more straightforward scheme, starting with
all the bits set, and shifting over one each time. Then increase the
maximum depth to 129, and choose a better name for that variable to
make it clear that it represents depth as opposed to bits.

Cc: stable@vger.kernel.org
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230807132146.2191597-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves

BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with
following testcase:

  # ip netns add ns1
  # ip netns exec ns1 ip link add bond0 type bond mode 0
  # ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
  # ip netns exec ns1 ip link set bond_slave_1 master bond0
  # ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link set bond_slave_1 nomaster
  # ip netns del ns1

The logical analysis of the problem is as follows:

1. create ETH_P_8021AD protocol vlan10 for bond_slave_1:
register_vlan_dev()
  vlan_vid_add()
    vlan_info_alloc()
    __vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1

2. create ETH_P_8021AD protocol bond0_vlan10 for bond0:
register_vlan_dev()
  vlan_vid_add()
    __vlan_vid_add()
      vlan_add_rx_filter_info()
          if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER
              return 0;

          if (netif_device_present(dev))
              return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called
              // The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid.

3. detach bond_slave_1 from bond0:
__bond_release_one()
  vlan_vids_del_by_dev()
    list_for_each_entry(vid_info, &vlan_info->vid_list, list)
        vlan_vid_del(dev, vid_info->proto, vid_info->vid);
        // bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted.
        // bond_slave_1->vlan_info will be assigned NULL.

4. delete vlan10 during delete ns1:
default_device_exit_batch()
  dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10
    vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1
BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!!

Add S-VLAN tag related features support to bond driver. So the bond driver
will always propagate the VLAN info to its slaves.

Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Add capability check for vnic counters

Add missing capability check for each of the vnic counters exposed by
devlink health reporter, and thus avoid unexpected behavior due to
invalid access to registers.

While at it, read only the exact number of bits for each counter whether
it was 32 bits or 64 bits.

Fixes: b0bc615df488 ("net/mlx5: Add vnic devlink health reporter to PFs/VFs")
Fixes: a33682e4e78e ("net/mlx5e: Expose catastrophic steering error counters")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Reload auxiliary devices in pci error handlers

Handling pci errors should fully teardown and load back auxiliary
devices, same as done through mlx5 health recovery flow.

Fixes: 72ed5d5624af ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Skip clock update work when device is in error state

When device is in error state, marked by the flag
MLX5_DEVICE_STATE_INTERNAL_ERROR, the HW and PCI may not be accessible
and so clock update work should be skipped. Furthermore, such access
through PCI in error state, after calling mlx5_pci_disable_device() can
result in failing to recover from pci errors.

Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support")
Reported-and-tested-by: Ganesh G R <ganeshgr@linux.ibm.com>
Closes: https://lore.kernel.org/netdev/9bdb9b9d-140a-7a28-f0de-2e64e873c068@nvidia.com
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: LAG, Check correct bucket when modifying LAG

Cited patch introduced buckets in hash mode, but missed to update
the ports/bucket check when modifying LAG.
Fix the check.

Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Unoffload post act rule when handling FIB events

If having the following tc rule on stack device:

filter parent ffff: protocol ip pref 3 flower chain 1
filter parent ffff: protocol ip pref 3 flower chain 1 handle 0x1
  dst_mac 24:25:d0:e1:00:00
  src_mac 02:25:d0:25:01:02
  eth_type ipv4
  ct_state +trk+new
  in_hw in_hw_count 1
        action order 1: ct commit zone 0 pipe
         index 2 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec
        Action statistics:
        Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
        backlog 0b 0p requeues 0
        used_hw_stats delayed

        action order 2: tunnel_key  set
        src_ip 192.168.1.25
        dst_ip 192.168.1.26
        key_id 4
        dst_port 4789
        csum pipe
         index 3 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec
        Action statistics:
        Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
        backlog 0b 0p requeues 0
        used_hw_stats delayed

        action order 3: mirred (Egress Redirect to device vxlan1) stolen
        index 9 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec
        Action statistics:
        Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
        backlog 0b 0p requeues 0
        used_hw_stats delayed

When handling FIB events, the rule in post act will not be deleted.
And because the post act rule has packet reformat and modify header
actions, also will hit the following syndromes:

mlx5_core 0000:08:00.0: mlx5_cmd_out_err:829:(pid 11613): DEALLOC_MODIFY_HEADER_CONTEXT(0x941) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1ab444), err(-22)
mlx5_core 0000:08:00.0: mlx5_cmd_out_err:829:(pid 11613): DEALLOC_PACKET_REFORMAT_CONTEXT(0x93e) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x179e84), err(-22)

Fix it by unoffloading post act rule when handling FIB events.

Fixes: 314e1105831b ("net/mlx5e: Add post act offload/unoffload API")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Fix devlink controller number for ECVF

The controller number for ECVFs is always 0, because the ECPF must be
the eswitch owner for EC VFs to be enabled.

Fixes: dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Allow 0 for total host VFs

When querying eswitch functions 0 is a valid number of host VFs. After
introducing ARM SRIOV falling through to getting the max value from PCI
results in using the total VFs allowed on the ARM for the host.

Fixes: 86eec50beaf3 ("net/mlx5: Support querying max VFs from device");
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Return correct EC_VF function ID

The ECVF function ID range is 1..max_ec_vfs. Currently
mlx5_vport_to_func_id returns 0..max_ec_vfs - 1. Which
results in a syndrome when querying the caps with more
recent firmware, or reading incorrect caps with older
firmware that supports EC VFs.

Fixes: 9ac0b128248e ("net/mlx5: Update vport caps query/set for EC VFs")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: DR, Fix wrong allocation of modify hdr pattern

Fixing wrong calculation of the modify hdr pattern size,
where the previously calculated number would not be enough
to accommodate the required number of actions.

Fixes: da5d0027d666 ("net/mlx5: DR, Add cache for modify header pattern")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: TC, Fix internal port memory leak

The flow rule can be splited, and the extra post_act rules are added
to post_act table. It's possible to trigger memleak when the rule
forwards packets from internal port and over tunnel, in the case that,
for example, CT 'new' state offload is allowed. As int_port object is
assigned to the flow attribute of post_act rule, and its refcnt is
incremented by mlx5e_tc_int_port_get(), but mlx5e_tc_int_port_put() is
not called, the refcnt is never decremented, then int_port is never
freed.

The kmemleak reports the following error:
unreferenced object 0xffff888128204b80 (size 64):
  comm "handler20", pid 50121, jiffies 4296973009 (age 642.932s)
  hex dump (first 32 bytes):
    01 00 00 00 19 00 00 00 03 f0 00 00 04 00 00 00  ................
    98 77 67 41 81 88 ff ff 98 77 67 41 81 88 ff ff  .wgA.....wgA....
  backtrace:
    [<00000000e992680d>] kmalloc_trace+0x27/0x120
    [<000000009e945a98>] mlx5e_tc_int_port_get+0x3f3/0xe20 [mlx5_core]
    [<0000000035a537f0>] mlx5e_tc_add_fdb_flow+0x473/0xcf0 [mlx5_core]
    [<0000000070c2cec6>] __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core]
    [<000000005cc84048>] mlx5e_configure_flower+0xd40/0x4c40 [mlx5_core]
    [<000000004f8a2031>] mlx5e_rep_indr_offload.isra.0+0x10e/0x1c0 [mlx5_core]
    [<000000007df797dc>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
    [<0000000016c15cc3>] tc_setup_cb_add+0x1cf/0x410
    [<00000000a63305b4>] fl_hw_replace_filter+0x38f/0x670 [cls_flower]
    [<000000008bc9e77c>] fl_change+0x1fd5/0x4430 [cls_flower]
    [<00000000e7f766e4>] tc_new_tfilter+0x867/0x2010
    [<00000000e101c0ef>] rtnetlink_rcv_msg+0x6fc/0x9f0
    [<00000000e1111d44>] netlink_rcv_skb+0x12c/0x360
    [<0000000082dd6c8b>] netlink_unicast+0x438/0x710
    [<00000000fc568f70>] netlink_sendmsg+0x794/0xc50
    [<0000000016e92590>] sock_sendmsg+0xc5/0x190

So fix this by moving int_port cleanup code to the flow attribute
free helper, which is used by all the attribute free cases.

Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()

Hold RTNL lock when calling xdp_set_features() with a registered netdev,
as the call triggers the netdev notifiers. This could happen when
switching from uplink rep to nic profile for example.

This resolves the following call trace:

RTNL: assertion failed at net/core/dev.c (1953)
WARNING: CPU: 6 PID: 112670 at net/core/dev.c:1953 call_netdevice_notifiers_info+0x7c/0x80
Modules linked in: sch_mqprio sch_mqprio_lib act_tunnel_key act_mirred act_skbedit cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress bonding ib_umad ip_gre rdma_ucm mlx5_vfio_pci ipip tunnel4 ip6_gre gre mlx5_ib vfio_pci vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ib_ipoib geneve nf_tables ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 6 PID: 112670 Comm: devlink Not tainted 6.4.0-rc7_for_upstream_min_debug_2023_06_28_17_02 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80
Code: 90 ff 80 3d 2d 6b f7 00 00 75 c5 ba a1 07 00 00 48 c7 c6 e4 ce 0b 82 48 c7 c7 c8 f4 04 82 c6 05 11 6b f7 00 01 e8 a4 7c 8e ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec
RSP: 0018:ffff8882a21c3948 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff82e6f880 RCX: 0000000000000027
RDX: ffff88885f99b5c8 RSI: 0000000000000001 RDI: ffff88885f99b5c0
RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003
R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff8882a21c3968
R13: ffff88811c018940 R14: 0000000000000000 R15: ffff8881274401a0
FS: 00007fe141c81800(0000) GS:ffff88885f980000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f787c28b948 CR3: 000000014bcf3005 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x79/0x120
? call_netdevice_notifiers_info+0x7c/0x80
? report_bug+0x17c/0x190
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? call_netdevice_notifiers_info+0x7c/0x80
? call_netdevice_notifiers_info+0x7c/0x80
call_netdevice_notifiers+0x2e/0x50
mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core]
mlx5e_nic_init+0xf1/0x1a0 [mlx5_core]
mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core]
mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core]
mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
mlx5e_vport_rep_unload+0xaa/0xc0 [mlx5_core]
__esw_offloads_unload_rep+0x52/0x60 [mlx5_core]
mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core]
esw_offloads_unload_rep+0x34/0x70 [mlx5_core]
esw_offloads_disable+0x2b/0x90 [mlx5_core]
mlx5_eswitch_disable_locked+0x1b9/0x210 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0xf5/0x630 [mlx5_core]
? devlink_get_from_attrs_lock+0x9e/0x110
devlink_nl_cmd_eswitch_set_doit+0x60/0xe0
genl_family_rcv_msg_doit.isra.0+0xc2/0x110
genl_rcv_msg+0x17d/0x2b0
? devlink_get_from_attrs_lock+0x110/0x110
? devlink_nl_cmd_eswitch_get_doit+0x290/0x290
? devlink_pernet_pre_exit+0xf0/0xf0
? genl_family_rcv_msg_doit.isra.0+0x110/0x110
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1f6/0x2c0
netlink_sendmsg+0x232/0x4a0
sock_sendmsg+0x38/0x60
? _copy_from_user+0x2a/0x60
__sys_sendto+0x110/0x160
? __count_memcg_events+0x48/0x90
? handle_mm_fault+0x161/0x260
? do_user_addr_fault+0x278/0x6e0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fe141b1340a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007fff61d03de8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000afab00 RCX: 00007fe141b1340a
RDX: 0000000000000038 RSI: 0000000000afab00 RDI: 0000000000000003
RBP: 0000000000afa910 R08: 00007fe141d80200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
</TASK>

Fixes: 4d5ab0ad964d ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

ionic: Add missing err handling for queue reconfig

ionic_start_queues_reconfig returns an error code if txrx_init fails.
Handle this error code in the relevant places.

This fixes a corner case where the device could get left in a detached
state if the CMB reconfig fails and the attempt to clean up the mess
also fails. Note that calling netif_device_attach when the netdev is
already attached does not lead to unexpected behavior.

Change goto name "errout" to "err_out" to maintain consistency across
goto statements.

Fixes: 40bc471dc714 ("ionic: add tx/rx-push support with device Component Memory Buffers")
Fixes: 6f7d6f0fd7a3 ("ionic: pull reset_queues into tx_timeout handler")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers: vxlan: vnifilter: free percpu vni stats on error path

In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the
allocated percpu vni stats are not freed on the error path.

Introduce vxlan_vni_free() which would work as a nice wrapper to free
vxlan_vni_node resources properly.

Found by Linux Verification Center (linuxtesting.org).

Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

macsec: use DEV_STATS_INC()

syzbot/KCSAN reported data-races in macsec whenever dev->stats fields
are updated.

It appears all of these updates can happen from multiple cpus.

Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: tls: avoid discarding data on record close

TLS records end with a 16B tag. For TLS device offload we only
need to make space for this tag in the stream, the device will
generate and replace it with the actual calculated tag.

Long time ago the code would just re-reference the head frag
which mostly worked but was suboptimal because it prevented TCP
from combining the record into a single skb frag. I'm not sure
if it was correct as the first frag may be shorter than the tag.

The commit under fixes tried to replace that with using the page
frag and if the allocation failed rolling back the data, if record
was long enough. It achieves better fragment coalescing but is
also buggy.

We don't roll back the iterator, so unless we're at the end of
send we'll skip the data we designated as tag and start the
next record as if the rollback never happened.
There's also the possibility that the record was constructed
with MSG_MORE and the data came from a different syscall and
we already told the user space that we "got it".

Allocate a single dummy page and use it as fallback.

Found by code inspection, and proven by forcing allocation
failures.

Fixes: e7b159a48ba6 ("net/tls: remove the record tail optimization")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

dccp: fix data-race around dp->dccps_mss_cache

dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().

Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked.

Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803163021.2958262-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-more-fixes-for-v6-5'

Matthieu Baerts says:

====================
mptcp: more fixes for v6.5

Here is a new batch of fixes related to MPTCP for v6.5 and older.

Patches 1 and 2 fix issues with MPTCP Join selftest when manually
launched with '-i' parameter to use 'ip mptcp' tool instead of the
dedicated one (pm_nl_ctl). The issues have been there since v5.18.

Thank you Andrea for your first contributions to MPTCP code in the
upstream kernel!

Patch 3 avoids corrupting the data stream when trying to reset
connections that have fallen back to TCP. This can happen from v6.1.

Patch 4 fixes a race when doing a disconnect() and an accept() in
parallel on a listener socket. The issue only happens in rare cases if
the user is really unlucky since a fix that landed in v6.3 but
backported up to v6.1.
====================

Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-0-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix disconnect vs accept race

Despite commit 0ad529d9fd2b ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.

The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.

As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:

BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330
Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89
RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300
RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a
RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020
R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880
FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_accept+0x1ae/0x260 net/socket.c:1872
__sys_accept4+0x9b/0x110 net/socket.c:1913
__do_sys_accept4 net/socket.c:1954 [inline]
__se_sys_accept4 net/socket.c:1951 [inline]
__x64_sys_accept4+0x20/0x30 net/socket.c:1951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.

After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal.

Fixes: 2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/423
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: avoid bogus reset on fallback close

Since the blamed commit, the MPTCP protocol unconditionally sends
TCP resets on all the subflows on disconnect().

That fits full-blown MPTCP sockets - to implement the fastclose
mechanism - but causes unexpected corruption of the data stream,
caught as sporadic self-tests failures.

Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/419
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-3-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: fix 'implicit EP' test

mptcp_join 'implicit EP' test currently fails when using ip mptcp:

  $ ./mptcp_join.sh -iI
  <snip>
  001 implicit EP    creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
  Error: too many addresses or duplicate one: -22.
                     ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
                     modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal '

This happens because of two reasons:
- iproute v6.3.0 does not support the implicit flag, fixed with
  iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit
  flag")
- pm_nl_check_endpoint wrongly expects the ip address to be repeated two
  times in iproute output, and does not account for a final whitespace
  in it.

This fixes the issue trimming the whitespace in the output string and
removing the double address in the expected string.

Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: mptcp: join: fix 'delete and re-add' test

mptcp_join 'delete and re-add' test fails when using ip mptcp:

  $ ./mptcp_join.sh -iI
  <snip>
  002 delete and re-add                    before delete[ ok ]
                                           mptcp_info subflows=1         [ ok ]
  Error: argument "ADDRESS" is wrong: invalid for non-zero id address
                                           after delete[fail] got 2:2 subflows expected 1

This happens because endpoint delete includes an ip address while id is
not 0, contrary to what is indicated in the ip mptcp man page:

"When used with the delete id operation, an IFADDR is only included when
the ID is 0."

This fixes the issue using the $addr variable in pm_nl_del_endpoint()
only when id is 0.

Fixes: 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tunnels-fix-ipv4-pmtu-icmp-checksum'

Florian Westphal says:

====================
tunnels: fix ipv4 pmtu icmp checksum

The checksum of the generated ipv4 icmp pmtud message is
only correct if the skb that causes the icmp error generation
is linear.

Fix this and add a selftest for this.
====================

Link: https://lore.kernel.org/r/20230803152653.29535-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: net: test vxlan pmtu exceptions with tcp

TCP might get stuck if a nonlinear skb exceeds the path MTU,
icmp error contains an incorrect icmp checksum in that case.

Extend the existing test for vxlan to also send at least 1MB worth of
data via TCP in addition to the existing 'large icmp packet adds
route exception'.

On my test VM this fails due to 0-size output file without
"tunnels: fix kasan splat when generating ipv4 pmtu error".

Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tunnels: fix kasan splat when generating ipv4 pmtu error

If we try to emit an icmp error in response to a nonliner skb, we get

BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]

ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck.

Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-2-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/packet: annotate data-races around tp->status

Another syzbot report [1] is about tp->status lockless reads
from __packet_get_status()

[1]
BUG: KCSAN: data-race in __packet_rcv_has_room / __packet_set_status

write to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 0:
__packet_set_status+0x78/0xa0 net/packet/af_packet.c:407
tpacket_rcv+0x18bb/0x1a60 net/packet/af_packet.c:2483
deliver_skb net/core/dev.c:2173 [inline]
__netif_receive_skb_core+0x408/0x1e80 net/core/dev.c:5337
__netif_receive_skb_one_core net/core/dev.c:5491 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x57/0xa0 kernel/softirq.c:650
sysvec_apic_timer_interrupt+0x6d/0x80 arch/x86/kernel/apic/apic.c:1106
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:645
smpboot_thread_fn+0x33c/0x4a0 kernel/smpboot.c:112
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

read to 0xffff888117d7c080 of 8 bytes by interrupt on cpu 1:
__packet_get_status net/packet/af_packet.c:436 [inline]
packet_lookup_frame net/packet/af_packet.c:524 [inline]
__tpacket_has_room net/packet/af_packet.c:1255 [inline]
__packet_rcv_has_room+0x3f9/0x450 net/packet/af_packet.c:1298
tpacket_rcv+0x275/0x1a60 net/packet/af_packet.c:2285
deliver_skb net/core/dev.c:2173 [inline]
dev_queue_xmit_nit+0x38a/0x5e0 net/core/dev.c:2243
xmit_one net/core/dev.c:3574 [inline]
dev_hard_start_xmit+0xcf/0x3f0 net/core/dev.c:3594
__dev_queue_xmit+0xefb/0x1d10 net/core/dev.c:4244
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
can_send+0x4eb/0x5d0 net/can/af_can.c:276
bcm_can_tx+0x314/0x410 net/can/bcm.c:302
bcm_tx_timeout_handler+0xdb/0x260
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x217/0x700 kernel/time/hrtimer.c:1749
hrtimer_run_softirq+0xd6/0x120 kernel/time/hrtimer.c:1766
__do_softirq+0xc1/0x265 kernel/softirq.c:571
run_ksoftirqd+0x17/0x20 kernel/softirq.c:939
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

value changed: 0x0000000000000000 -> 0x0000000020000081

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19 Comm: ksoftirqd/1 Not tainted 6.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023

Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230803145600.2937518-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: ocelot: call dsa_tag_8021q_unregister() under rtnl_lock() on driver remove

When the tagging protocol in current use is "ocelot-8021q" and we unbind
the driver, we see this splat:

$ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind
mscc_felix 0000:00:00.5 swp0: left promiscuous mode
sja1105 spi2.0: Link is Down
DSA: tree 1 torn down
mscc_felix 0000:00:00.5 swp2: left promiscuous mode
sja1105 spi2.2: Link is Down
DSA: tree 3 torn down
fsl_enetc 0000:00:00.2 eno2: left promiscuous mode
mscc_felix 0000:00:00.5: Link is Down
------------[ cut here ]------------
RTNL: assertion failed at net/dsa/tag_8021q.c (409)
WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0
Modules linked in:
CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771
pc : dsa_tag_8021q_unregister+0x12c/0x1a0
lr : dsa_tag_8021q_unregister+0x12c/0x1a0
Call trace:
dsa_tag_8021q_unregister+0x12c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
RTNL: assertion failed at net/8021q/vlan_core.c (376)
WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0
CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771
pc : vlan_vid_del+0x1b8/0x1f0
lr : vlan_vid_del+0x1b8/0x1f0
dsa_tag_8021q_unregister+0x8c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
DSA: tree 0 torn down

This was somewhat not so easy to spot, because "ocelot-8021q" is not the
default tagging protocol, and thus, not everyone who tests the unbinding
path may have switched to it beforehand. The default
felix_tag_npi_teardown() does not require rtnl_lock() to be held.

Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230803134253.2711124-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix the incorrect judgment for msk->cb_flags

Coccicheck reports the error below:
net/mptcp/protocol.c:3330:15-28: ERROR: test of a variable/field address

Since the address of msk->cb_flags is used in __test_and_clear_bit, the
address should not be NULL. The judgment for if (unlikely(msk->cb_flags))
will always be true, we should check the real value of msk->cb_flags here.

Fixes: 65a569b03ca8 ("mptcp: optimize release_cb for the common case")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803072438.1847500-1-xiangyang3@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'at803x-wol'

Li Yang says:

====================
fix at803x wol setting

v3:
  Break long lines
  Add back error checking of phy_read

v4:
  Disable WoL in 1588 register for AR8031 in probe
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: at803x: remove set/get wol callbacks for AR8032

Since the AR8032 part does not support wol, remove related callbacks
from it.

Fixes: 5800091a2061 ("net: phy: at803x: add support for AR8032 PHY")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Cc: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: at803x: fix the wol setting functions

In commit 7beecaf7d507 ("net: phy: at803x: improve the WOL feature"), it
seems not correct to use a wol_en bit in a 1588 Control Register which is
only available on AR8031/AR8033(share the same phy_id) to determine if WoL
is enabled.  Change it back to use AT803X_INTR_ENABLE_WOL for determining
the WoL status which is applicable on all chips supporting wol. Also update
the at803x_set_wol() function to only update the 1588 register on chips
having it.  After this change, disabling wol at probe from commit
d7cd5e06c9dd ("net: phy: at803x: disable WOL at probe") is no longer
needed.  Change it to just disable the WoL bit in 1588 register for
AR8031/AR8033 to be aligned with AT803X_INTR_ENABLE_WOL in probe.

Fixes: 7beecaf7d507 ("net: phy: at803x: improve the WOL feature")
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

mISDN: Update parameter type of dsp_cmx_send()

When booting a kernel with CONFIG_MISDN_DSP=y and CONFIG_CFI_CLANG=y,
there is a failure when dsp_cmx_send() is called indirectly from
call_timer_fn():

[ 0.371412] CFI failure at call_timer_fn+0x2f/0x150 (target: dsp_cmx_send+0x0/0x530; expected type: 0x92ada1e9)

The function pointer prototype that call_timer_fn() expects is

void (*fn)(struct timer_list *)

whereas dsp_cmx_send() has a parameter type of 'void *', which causes
the control flow integrity checks to fail because the parameter types do
not match.

Change dsp_cmx_send()'s parameter type to be 'struct timer_list' to
match the expected prototype. The argument is unused anyways, so this
has no functional change, aside from avoiding the CFI failure.

Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308020936.58787e6c-oliver.sang@intel.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: e313ac12eb13 ("mISDN: Convert timers to use timer_setup()")
Link: https://lore.kernel.org/r/20230802-fix-dsp_cmx_send-cfi-failure-v1-1-2f2e79b0178d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.5-rc5' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and wireless.

  Nothing scary here. Feels like the first wave of regressions from v6.5
  is addressed - one outstanding fix still to come in TLS for the
  sendpage rework.

  Current release - regressions:

   - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES

   - dsa: fix older DSA drivers using phylink

  Previous releases - regressions:

   - gro: fix misuse of CB in udp socket lookup

   - mlx5: unregister devlink params in case interface is down

   - Revert "wifi: ath11k: Enable threaded NAPI"

  Previous releases - always broken:

   - sched: cls_u32: fix match key mis-addressing

   - sched: bind logic fixes for cls_fw, cls_u32 and cls_route

   - add bound checks to a number of places which hand-parse netlink

   - bpf: disable preemption in perf_event_output helpers code

   - qed: fix scheduling in a tasklet while getting stats

   - avoid using APIs which are not hardirq-safe in couple of drivers,
     when we may be in a hard IRQ (netconsole)

   - wifi: cfg80211: fix return value in scan logic, avoid page
     allocator warning

   - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D
     (DBDC)

  Misc:

   - drop handful of inactive maintainers, put some new in place"

* tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits)
  MAINTAINERS: update TUN/TAP maintainers
  test/vsock: remove vsock_perf executable on `make clean`
  tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen
  tcp_metrics: annotate data-races around tm->tcpm_net
  tcp_metrics: annotate data-races around tm->tcpm_vals[]
  tcp_metrics: annotate data-races around tm->tcpm_lock
  tcp_metrics: annotate data-races around tm->tcpm_stamp
  tcp_metrics: fix addr_same() helper
  prestera: fix fallback to previous version on same major version
  udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
  net/mlx5e: Set proper IPsec source port in L4 selector
  net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio
  net/mlx5: fs_core: Make find_closest_ft more generic
  wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
  vxlan: Fix nexthop hash size
  ip6mr: Fix skb_under_panic in ip6mr_cache_report()
  s390/qeth: Don't call dev_close/dev_open (DOWN/UP)
  net: tap_open(): set sk_uid from current_fsuid()
  net: tun_chr_open(): set sk_uid from current_fsuid()
  net: dcb: choose correct policy to parse DCB_ATTR_BCN
  ...

MAINTAINERS: update TUN/TAP maintainers

Willem and Jason have agreed to take over the maintainer
duties for TUN/TAP, thank you!

There's an existing entry for TUN/TAP which only covers
the user mode Linux implementation.
Since we haven't heard from Maxim on the list for almost
a decade, extend that entry and take it over, rather than
adding a new one.

Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230802182843.4193099-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Martin KaFai Lau says:

====================
pull-request: bpf 2023-08-03

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 3 files changed, 37 insertions(+), 20 deletions(-).

The main changes are:

1) Disable preemption in perf_event_output helpers code,
   from Jiri Olsa

2) Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing,
   from Lin Ma

3) Multiple warning splat fixes in cpumap from Hou Tao

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, cpumap: Handle skb as well when clean up ptr_ring
  bpf, cpumap: Make sure kthread is running before map update returns
  bpf: Add length check for SK_DIAG_BPF_STORAGE_REQ_MAP_FD parsing
  bpf: Disable preemption in bpf_event_output
  bpf: Disable preemption in bpf_perf_event_output
====================

Link: https://lore.kernel.org/r/20230803181429.994607-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2023-08-03' of git://git./linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.5

We did some house cleaning in MAINTAINERS file so several patches
about that. Few regressions fixed and also fix some recently enabled
memcpy() warnings. Only small commits and nothing special standing
out.

* tag 'wireless-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
  wifi: ray_cs: Replace 1-element array with flexible array
  MAINTAINERS: add Jeff as ath10k, ath11k and ath12k maintainer
  MAINTAINERS: wifi: mark mlw8k as orphan
  MAINTAINERS: wifi: mark b43 as orphan
  MAINTAINERS: wifi: mark zd1211rw as orphan
  MAINTAINERS: wifi: mark wl3501 as orphan
  MAINTAINERS: wifi: mark rndis_wlan as orphan
  MAINTAINERS: wifi: mark ar5523 as orphan
  MAINTAINERS: wifi: mark cw1200 as orphan
  MAINTAINERS: wifi: atmel: mark as orphan
  MAINTAINERS: wifi: rtw88: change Ping as the maintainer
  Revert "wifi: ath6k: silence false positive -Wno-dangling-pointer warning on GCC 12"
  wifi: cfg80211: Fix return value in scan logic
  Revert "wifi: ath11k: Enable threaded NAPI"
  MAINTAINERS: Update mwifiex maintainer list
  wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC)
====================

Link: https://lore.kernel.org/r/20230803140058.57476C433C9@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

test/vsock: remove vsock_perf executable on `make clean`

We forgot to add vsock_perf to the rm command in the `clean`
target, so now we have a left over after `make clean` in
tools/testing/vsock.

Fixes: 8abbffd27ced ("test/vsock: vsock_perf utility")
Cc: AVKrasnov@sberdevices.ru
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20230803085454.30897-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tcp_metrics-series-of-fixes'

Eric Dumazet says:

====================
tcp_metrics: series of fixes

This series contains a fix for addr_same() and various
data-race annotations.

We still have to address races over tm->tcpm_saddr and
tm->tcpm_daddr later.
====================

Link: https://lore.kernel.org/r/20230802131500.1478140-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen

Whenever tcpm_new() reclaims an old entry, tcpm_suck_dst()
would overwrite data that could be read from tcp_fastopen_cache_get()
or tcp_metrics_fill_info().

We need to acquire fastopen_seqlock to maintain consistency.

For newly allocated objects, tcpm_new() can switch to kzalloc()
to avoid an extra fastopen_seqlock acquisition.

Fixes: 1fe4c481ba63 ("net-tcp: Fast Open client - cookie cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_net

tm->tcpm_net can be read or written locklessly.

Instead of changing write_pnet() and read_pnet() and potentially
hurt performance, add the needed READ_ONCE()/WRITE_ONCE()
in tm_net() and tcpm_new().

Fixes: 849e8a0ca8d5 ("tcp_metrics: Add a field tcpm_net and verify it matches on lookup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_vals[]

tm->tcpm_vals[] values can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this,
and force use of tcp_metric_get() and tcp_metric_set()

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_lock

tm->tcpm_lock can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this.

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: annotate data-races around tm->tcpm_stamp

tm->tcpm_stamp can be read or written locklessly.

Add needed READ_ONCE()/WRITE_ONCE() to document this.

Also constify tcpm_check_stamp() dst argument.

Fixes: 51c5d0c4b169 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_metrics: fix addr_same() helper

Because v4 and v6 families use separate inetpeer trees (respectively
net->ipv4.peers and net->ipv6.peers), inetpeer_addr_cmp(a, b) assumes
a & b share the same family.

tcp_metrics use a common hash table, where entries can have different
families.

We must therefore make sure to not call inetpeer_addr_cmp()
if the families do not match.

Fixes: d39d14ffa24c ("net: Add helper function to compare inetpeer addresses")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230802131500.1478140-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

prestera: fix fallback to previous version on same major version

When both supported and previous version have the same major version,
and the firmwares are missing, the driver ends in a loop requesting the
same (previous) version over and over again:

    [   76.327413] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
    [   76.339802] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.352162] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.364502] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.376848] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.389183] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.401522] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.413860] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    [   76.426199] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.0.img firmware, fall-back to previous 4.0 version
    ...

Fix this by inverting the check to that we aren't yet at the previous
version, and also check the minor version.

This also catches the case where both versions are the same, as it was
after commit bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0
support").

With this fix applied:

    [   88.499622] Prestera DX 0000:01:00.0: missing latest mrvl/prestera/mvsw_prestera_fw-v4.1.img firmware, fall-back to previous 4.0 version
    [   88.511995] Prestera DX 0000:01:00.0: failed to request previous firmware: mrvl/prestera/mvsw_prestera_fw-v4.0.img
    [   88.522403] Prestera DX: probe of 0000:01:00.0 failed with error -2

Fixes: 47f26018a414 ("net: marvell: prestera: try to load previous fw version")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Taras Chornyi <taras.chornyi@plvision.eu>
Link: https://lore.kernel.org/r/20230802092357.163944-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nfsd-6.5-3' of git://git./linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

- Fix tmpfs splice read support

* tag 'nfsd-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: Fix reading via splice

Merge tag 'erofs-for-6.5-rc5-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:

- Fix data corruption caused by insufficient decompression on
   deduplicated compressed extents

- Drop a useless s_magic checking in erofs_kill_sb()

* tag 'erofs-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: drop unnecessary WARN_ON() in erofs_kill_sb()
  erofs: fix wrong primary bvec selection on deduplicated extents

Merge tag 's390-6.5-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

- Split kernel large page mappings into 4k mappings in case debug
   pagealloc is enabled again. This got accidentally removed by commit
   bb1520d581a3 ("s390/mm: start kernel with DAT enabled")

- Fix error handling in KVM's sthyi handling

- Add missing include to s390's uapi ptrace.h

- Update defconfigs

* tag 's390-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ptrace: add missing linux/const.h include
  KVM: s390: fix sthyi error handling
  s390: update defconfigs
  s390/vmem: split pages when debug pagealloc is enabled

udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES

__ip_append_data() can get into an infinite loop when asked to splice into
a partially-built UDP message that has more than the frag-limit data and up
to the MTU limit.  Something like:

        pipe(pfd);
        sfd = socket(AF_INET, SOCK_DGRAM, 0);
        connect(sfd, ...);
        send(sfd, buffer, 8161, MSG_CONFIRM|MSG_MORE);
        write(pfd[1], buffer, 8);
        splice(pfd[0], 0, sfd, 0, 0x4ffe0ul, 0);

where the amount of data given to send() is dependent on the MTU size (in
this instance an interface with an MTU of 8192).

The problem is that the calculation of the amount to copy in
__ip_append_data() goes negative in two places, and, in the second place,
this gets subtracted from the length remaining, thereby increasing it.

This happens when pagedlen > 0 (which happens for MSG_ZEROCOPY and
MSG_SPLICE_PAGES), because the terms in:

        copy = datalen - transhdrlen - fraggap - pagedlen;

then mostly cancel when pagedlen is substituted for, leaving just -fraggap.
This causes:

        length -= copy + transhdrlen;

to increase the length to more than the amount of data in msg->msg_iter,
which causes skb_splice_from_iter() to be unable to fill the request and it
returns less than 'copied' - which means that length never gets to 0 and we
never exit the loop.

Fix this by:

(1) Insert a note about the dodgy calculation of 'copy'.

(2) If MSG_SPLICE_PAGES, clear copy if it is negative from the above
     equation, so that 'offset' isn't regressed and 'length' isn't
     increased, which will mean that length and thus copy should match the
     amount left in the iterator.

(3) When handling MSG_SPLICE_PAGES, give a warning and return -EIO if
     we're asked to splice more than is in the iterator.  It might be
     better to not give the warning or even just give a 'short' write.

[!] Note that this ought to also affect MSG_ZEROCOPY, but MSG_ZEROCOPY
avoids the problem by simply assuming that everything asked for got copied,
not just the amount that was in the iterator.  This is a potential bug for
the future.

Fixes: 7ac7c987850c ("udp: Convert udp_sendpage() to use MSG_SPLICE_PAGES")
Reported-by: syzbot+f527b971b4bdc8e79f9e@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000881d0606004541d1@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/1420063.1690904933@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlx5-ipsec-fixes'

Leon Romanovsky says:

====================
mlx5 IPsec fixes

The following patches are combination of Jianbo's work on IPsec eswitch mode
together with our internal review toward addition of TCP protocol selectors
support to IPSec packet offload.

Despite not-being fix, the first patch helps us to make second one more
clear, so I'm asking to apply it anyway as part of this series.
====================

Link: https://lore.kernel.org/r/cover.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5e: Set proper IPsec source port in L4 selector

Fix typo in setup_fte_upper_proto_match() where destination UDP port
was used instead of source port.

Fixes: a7385187a386 ("net/mlx5e: IPsec, support upper protocol selector field offload")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/ffc024a4d192113103f392b0502688366ca88c1f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio

In the cited commit, new type of FS_TYPE_PRIO_CHAINS fs_prio was added
to support multiple parallel namespaces for multi-chains. And we skip
all the flow tables under the fs_node of this type unconditionally,
when searching for the next or previous flow table to connect for a
new table.

As this search function is also used for find new root table when the
old one is being deleted, it will skip the entire FS_TYPE_PRIO_CHAINS
fs_node next to the old root. However, new root table should be chosen
from it if there is any table in it. Fix it by skipping only the flow
tables in the same FS_TYPE_PRIO_CHAINS fs_node when finding the
closest FT for a fs_node.

Besides, complete the connecting from FTs of previous priority of prio
because there should be multiple prevs after this fs_prio type is
introduced. And also the next FT should be chosen from the first flow
table next to the prio in the same FS_TYPE_PRIO_CHAINS fs_prio, if
this prio is the first child.

Fixes: 328edb499f99 ("net/mlx5: Split FDB fast path prio to multiple namespaces")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/7a95754df479e722038996c97c97b062b372591f.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: fs_core: Make find_closest_ft more generic

As find_closest_ft_recursive is called to find the closest FT, the
first parameter of find_closest_ft can be changed from fs_prio to
fs_node. Thus this function is extended to find the closest FT for the
nodes of any type, not only prios, but also the sub namespaces.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/d3962c2b443ec8dde7a740dc742a1f052d5e256c.1690803944.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'soc-fixes-6.5-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms get a lone dts fix each:

   - SoCFPGA: Fix incorrect I2C property for SCL signal

   - Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and
     RZ/V2L.

   - Juno/Vexpress: remove a dangling symlink

   - at91: sam9x60 SoC detection compatible strings

   - nspire: Fix arm primecell compatible string

  On the NXP i.MX platform, there multiple issues that get addressed:

   - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
     frequency of sk-imx53 board

   - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux

   - A couple of imx8mm-venice fixes from Tim Harvey to diable
     disp_blk_ctrl

   - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
     VPU label and gpio-line-names

   - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as
     bus_power_dev child, so that runtime PM can translate into the
     necessary GPC power domain action

  On the driver side, there are two fixes for tegra memory controller
  drivers addressing regressions from the merge window, a couple of
  minor correctness fixes for SCMI and SMCCC firmware, as well as a
  build fix for an lcd backlight driver"

* tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
  backlight: corgi_lcd: fix missing prototype
  memory: tegra: make icc_set_bw return zero if BWMGR not supported
  arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
  dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60
  ARM: dts: at91: sam9x60: fix the SOC detection
  ARM: dts: nspire: Fix arm primecell compatible string
  firmware: arm_scmi: Fix chan_free cleanup on SMC
  firmware: arm_scmi: Drop OF node reference in the transport channel setup
  soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
  ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
  firmware: arm_scmi: Fix signed error return values handling
  firmware: smccc: Fix use of uninitialised results structure
  arm64: dts: freescale: Fix VPU G2 clock
  arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
  arm64: dts: phycore-imx8mm: Correction in gpio-line-names
  arm64: dts: phycore-imx8mm: Label typo-fix of VPU
  ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
  arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
  arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
  arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
  ...

Merge tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux

Pull bitmap fixes from Yury Norov:

- Fix for bitmap documentation

- Fix for kernel build under certain configurations

* tag 'bitmap-6.5-rc5' of https://github.com:/norov/linux:
lib/bitmap: workaround const_eval test build failure
cpumask: eliminate kernel-doc warnings

Merge tag 'exfat-for-6.5-rc5' of git://git./linux/kernel/git/linkinjeon/exfat

Pull exfat fixes from Namjae Jeon:

- Fix page allocation failure from allocation bitmap by using
   kvmalloc_array/kvfree

- Add the check to validate if filename entries exceeds max filename
   length

- Fix potential deadlock condition from dir_emit*()

* tag 'exfat-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: release s_lock before calling dir_emit()
  exfat: check if filename entries exceeds max filename length
  exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pm80xx: Fix error return code in pm8001_pci_probe()
  scsi: zfcp: Defer fc_rport blocking until after ADISC response
  scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices