review.tizen.org Git - platform/kernel/linux-starfive.git/log

btrfs: use unaligned helpers for stack and header set/get helpers

In the definitions generated by BTRFS_SETGET_HEADER_FUNCS there's direct
pointer assignment but we should use the helpers for unaligned access
for clarity. It hasn't been a problem so far because of the natural
alignment.

Similarly for BTRFS_SETGET_STACK_FUNCS, that usually get a structure
from stack that has an aligned start but some members may not be aligned
due to packing. This as well hasn't caused problems so far.

Move the put/get_unaligned_le8 stubs to ctree.h so we can use them.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: free-space-cache: use unaligned helpers to access data

The free space inode stores the tracking data, checksums etc, using the
io_ctl structure and moving the pointers. The data are generally aligned
to at least 4 bytes (u32 for CRC) so it's not completely unaligned but
for clarity we should use the proper helpers whenever a struct is
initialized from io_ctl->cur pointer.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: use helpers for unaligned access to header members

The header is mapped onto the send buffer and thus its members may be
potentially unaligned so use the helpers instead of directly assigning
the pointers. This has worked so far but let's use the helpers to make
that clear.

Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use own btree inode io_tree owner id

Btree inode is special compared to all other inode extent io_trees,
although it has a btrfs inode, it doesn't have the track_uptodate bit at
all.

This means a lot of things like extent locking doesn't even need to be
applied to btree io tree.

Since it's so special, adds a new owner value for it to make debuging a
little easier.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: reschedule when cloning lots of extents

We have several occurrences of a soft lockup from fstest's generic/175
testcase, which look more or less like this one:

  watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [xfs_io:10030]
  Kernel panic - not syncing: softlockup: hung tasks
  CPU: 0 PID: 10030 Comm: xfs_io Tainted: G             L    5.9.0-rc5+ #768
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
  Call Trace:
   <IRQ>
   dump_stack+0x77/0xa0
   panic+0xfa/0x2cb
   watchdog_timer_fn.cold+0x85/0xa5
   ? lockup_detector_update_enable+0x50/0x50
   __hrtimer_run_queues+0x99/0x4c0
   ? recalibrate_cpu_khz+0x10/0x10
   hrtimer_run_queues+0x9f/0xb0
   update_process_times+0x28/0x80
   tick_handle_periodic+0x1b/0x60
   __sysvec_apic_timer_interrupt+0x76/0x210
   asm_call_on_stack+0x12/0x20
   </IRQ>
   sysvec_apic_timer_interrupt+0x7f/0x90
   asm_sysvec_apic_timer_interrupt+0x12/0x20
  RIP: 0010:btrfs_tree_unlock+0x91/0x1a0 [btrfs]
  RSP: 0018:ffffc90007123a58 EFLAGS: 00000282
  RAX: ffff8881cea2fbe0 RBX: ffff8881cea2fbe0 RCX: 0000000000000000
  RDX: ffff8881d23fd200 RSI: ffffffff82045220 RDI: ffff8881cea2fba0
  RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000032
  R10: 0000160000000000 R11: 0000000000001000 R12: 0000000000001000
  R13: ffff8882357fd5b0 R14: ffff88816fa76e70 R15: ffff8881cea2fad0
   ? btrfs_tree_unlock+0x15b/0x1a0 [btrfs]
   btrfs_release_path+0x67/0x80 [btrfs]
   btrfs_insert_replace_extent+0x177/0x2c0 [btrfs]
   btrfs_replace_file_extents+0x472/0x7c0 [btrfs]
   btrfs_clone+0x9ba/0xbd0 [btrfs]
   btrfs_clone_files.isra.0+0xeb/0x140 [btrfs]
   ? file_update_time+0xcd/0x120
   btrfs_remap_file_range+0x322/0x3b0 [btrfs]
   do_clone_file_range+0xb7/0x1e0
   vfs_clone_file_range+0x30/0xa0
   ioctl_file_clone+0x8a/0xc0
   do_vfs_ioctl+0x5b2/0x6f0
   __x64_sys_ioctl+0x37/0xa0
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f87977fc247
  RSP: 002b:00007ffd51a2f6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f87977fc247
  RDX: 00007ffd51a2f710 RSI: 000000004020940d RDI: 0000000000000003
  RBP: 0000000000000004 R08: 00007ffd51a79080 R09: 0000000000000000
  R10: 00005621f11352f2 R11: 0000000000000206 R12: 0000000000000000
  R13: 0000000000000000 R14: 00005621f128b958 R15: 0000000080000000
  Kernel Offset: disabled
  ---[ end Kernel panic - not syncing: softlockup: hung tasks ]---

All of these lockup reports have the call chain btrfs_clone_files() ->
btrfs_clone() in common. btrfs_clone_files() calls btrfs_clone() with
both source and destination extents locked and loops over the source
extent to create the clones.

Conditionally reschedule in the btrfs_clone() loop, to give some time back
to other processes.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use kvcalloc for allocation in btrfs_ioctl_send()

Replace kvzalloc() call with kvcalloc() that also checks the size
internally. There's a standalone overflow check in the function so we
can return invalid parameter combination. Use array_size() helper to
compute the memory size for clone_sources_tmp.

Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use kvzalloc() to allocate clone_roots in btrfs_ioctl_send()

btrfs_ioctl_send() used open-coded kvzalloc implementation earlier.
The code was accidentally replaced with kzalloc() call [1]. Restore
the original code by using kvzalloc() to allocate sctx->clone_roots.

[1] https://patchwork.kernel.org/patch/9757891/#20529627

Fixes: 818e010bf9d0 ("btrfs: replace opencoded kvzalloc with the helper")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove inode argument from btrfs_start_ordered_extent

The passed in ordered_extent struct is always well-formed and contains
the inode making the explicit argument redundant.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove inode argument from add_pending_csums

It's used to reference the csum root which can be done from the trans
handle as well. Simplify the signature and while at it also remove the
noinline attribute as the function uses only at most 16 bytes of stack
space.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: sink inode argument in insert_ordered_extent_file_extent

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: switch btrfs_remove_ordered_extent to btrfs_inode

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: clean BTRFS_I usage in btrfs_destroy_inode

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: open code extent_read_full_page to its sole caller

This makes reading the code a tad easier by decreasing the level of
indirection by one.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: sink mirror_num argument in __do_readpage

It's always set to 0 by the 2 callers so move it inside __do_readpage.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: sink read_flags argument into extent_read_full_page

It's always set to 0 by its sole caller - btrfs_readpage. Simply remove
it.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: sink mirror_num argument in extent_read_full_page

It's always set to 0 from the sole caller - btrfs_readpage.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: promote extent_read_full_page to btrfs_readpage

Now that btrfs_readpage is the only caller of extent_read_full_page the
latter can be open coded in the former. Use the occassion to rename
__extent_read_full_page to extent_read_full_page. To facillitate this
change submit_one_bio has to be exported as well.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove mirror_num argument from extent_read_full_page

It's called only from btrfs_readpage which always passes 0 so just sink
the argument into extent_read_full_page.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove btrfs_get_extent indirection from __do_readpage

Now that this function is only responsible for reading data pages it's
no longer necessary to pass get_extent_t parameter across several
layers of functions. This patch removes this parameter from multiple
functions: __get_extent_map/__do_readpage/__extent_read_full_page/
extent_read_full_page and simply calls btrfs_get_extent directly in
__get_extent_map.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove btree_get_extent

The sole purpose of this function was to satisfy the requirements of
__do_readpage. Since that function is no longer used to read metadata
pages the need to keep btree_get_extent around has also disappeared.
Simply remove it.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: simplify metadata pages reading

Metadata pages currently use __do_readpage to read metadata pages,
unfortunately this function is also used to deal with ordinary data
pages. This makes the metadata pages reading code to go through multiple
hoops in order to adhere to __do_readpage invariants. Most of these are
necessary for data pages which could be compressed. For metadata it's
enough to simply build a bio and submit it.

To this effect simply call submit_extent_page directly from
read_extent_buffer_pages which is the only callpath used to populate
extent_buffers with data. This in turn enables further cleanups.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove btree_readpage

There is no way for this function to be called as ->readpage() since
it's called from
generic_file_buffered_read/filemap_fault/do_read_cache_page/readhead
code. BTRFS doesn't utilize the first 3 for the btree inode and
implements it's owon readhead mechanism. So simply remove the function.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: reschedule if necessary when logging directory items

Logging directories with many entries can take a significant amount of
time, and in some cases monopolize a cpu/core for a long time if the
logging task doesn't happen to block often enough.

Johannes and Lu Fengqi reported test case generic/041 triggering a soft
lockup when the kernel has CONFIG_SOFTLOCKUP_DETECTOR=y. For this test
case we log an inode with 3002 hard links, and because the test removed
one hard link before fsyncing the file, the inode logging causes the
parent directory do be logged as well, which has 6004 directory items to
log (3002 BTRFS_DIR_ITEM_KEY items plus 3002 BTRFS_DIR_INDEX_KEY items),
so it can take a significant amount of time and trigger the soft lockup.

So just make tree-log.c:log_dir_items() reschedule when necessary,
releasing the current search path before doing so and then resume from
where it was before the reschedule.

The stack trace produced when the soft lockup happens is the following:

[10480.277653] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [xfs_io:28172]
[10480.279418] Modules linked in: dm_thin_pool dm_persistent_data (...)
[10480.284915] irq event stamp: 29646366
[10480.285987] hardirqs last  enabled at (29646365): [<ffffffff85249b66>] __slab_alloc.constprop.0+0x56/0x60
[10480.288482] hardirqs last disabled at (29646366): [<ffffffff8579b00d>] irqentry_enter+0x1d/0x50
[10480.290856] softirqs last  enabled at (4612): [<ffffffff85a00323>] __do_softirq+0x323/0x56c
[10480.293615] softirqs last disabled at (4483): [<ffffffff85800dbf>] asm_call_on_stack+0xf/0x20
[10480.296428] CPU: 2 PID: 28172 Comm: xfs_io Not tainted 5.9.0-rc4-default+ #1248
[10480.298948] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
[10480.302455] RIP: 0010:__slab_alloc.constprop.0+0x19/0x60
[10480.304151] Code: 86 e8 31 75 21 00 66 66 2e 0f 1f 84 00 00 00 (...)
[10480.309558] RSP: 0018:ffffadbe09397a58 EFLAGS: 00000282
[10480.311179] RAX: ffff8a495ab92840 RBX: 0000000000000282 RCX: 0000000000000006
[10480.313242] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff85249b66
[10480.315260] RBP: ffff8a497d04b740 R08: 0000000000000001 R09: 0000000000000001
[10480.317229] R10: ffff8a497d044800 R11: ffff8a495ab93c40 R12: 0000000000000000
[10480.319169] R13: 0000000000000000 R14: 0000000000000c40 R15: ffffffffc01daf70
[10480.321104] FS:  00007fa1dc5c0e40(0000) GS:ffff8a497da00000(0000) knlGS:0000000000000000
[10480.323559] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[10480.325235] CR2: 00007fa1dc5befb8 CR3: 0000000004f8a006 CR4: 0000000000170ea0
[10480.327259] Call Trace:
[10480.328286]  ? overwrite_item+0x1f0/0x5a0 [btrfs]
[10480.329784]  __kmalloc+0x831/0xa20
[10480.331009]  ? btrfs_get_32+0xb0/0x1d0 [btrfs]
[10480.332464]  overwrite_item+0x1f0/0x5a0 [btrfs]
[10480.333948]  log_dir_items+0x2ee/0x570 [btrfs]
[10480.335413]  log_directory_changes+0x82/0xd0 [btrfs]
[10480.336926]  btrfs_log_inode+0xc9b/0xda0 [btrfs]
[10480.338374]  ? init_once+0x20/0x20 [btrfs]
[10480.339711]  btrfs_log_inode_parent+0x8d3/0xd10 [btrfs]
[10480.341257]  ? dget_parent+0x97/0x2e0
[10480.342480]  btrfs_log_dentry_safe+0x3a/0x50 [btrfs]
[10480.343977]  btrfs_sync_file+0x24b/0x5e0 [btrfs]
[10480.345381]  do_fsync+0x38/0x70
[10480.346483]  __x64_sys_fsync+0x10/0x20
[10480.347703]  do_syscall_64+0x2d/0x70
[10480.348891]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[10480.350444] RIP: 0033:0x7fa1dc80970b
[10480.351642] Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 (...)
[10480.356952] RSP: 002b:00007fffb3d081d0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[10480.359458] RAX: ffffffffffffffda RBX: 0000562d93d45e40 RCX: 00007fa1dc80970b
[10480.361426] RDX: 0000562d93d44ab0 RSI: 0000562d93d45e60 RDI: 0000000000000003
[10480.363367] RBP: 0000000000000001 R08: 0000000000000000 R09: 00007fa1dc7b2a40
[10480.365317] R10: 0000562d93d0e366 R11: 0000000000000293 R12: 0000000000000001
[10480.367299] R13: 0000562d93d45290 R14: 0000562d93d45e40 R15: 0000562d93d45e60

Link: https://lore.kernel.org/linux-btrfs/20180713090216.GC575@fnst.localdomain/
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
CC: stable@vger.kernel.org # 4.4+
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not create raid sysfs entries under any locks

While running xfstests btrfs/177 I got the following lockdep splat

  ======================================================
  WARNING: possible circular locking dependency detected
  5.9.0-rc3+ #5 Not tainted
  ------------------------------------------------------
  kswapd0/100 is trying to acquire lock:
  ffff97066aa56760 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330

  but task is already holding lock:
  ffffffff9fd74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #3 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x65/0x80
slab_pre_alloc_hook.constprop.0+0x20/0x200
kmem_cache_alloc+0x37/0x270
alloc_inode+0x82/0xb0
iget_locked+0x10d/0x2c0
kernfs_get_inode+0x1b/0x130
kernfs_get_tree+0x136/0x240
sysfs_get_tree+0x16/0x40
vfs_get_tree+0x28/0xc0
path_mount+0x434/0xc00
__x64_sys_mount+0xe3/0x120
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #2 (kernfs_mutex){+.+.}-{3:3}:
__mutex_lock+0x7e/0x7e0
kernfs_add_one+0x23/0x150
kernfs_create_dir_ns+0x7a/0xb0
sysfs_create_dir_ns+0x60/0xb0
kobject_add_internal+0xc0/0x2c0
kobject_add+0x6e/0x90
btrfs_sysfs_add_block_group_type+0x102/0x160
btrfs_make_block_group+0x167/0x230
btrfs_alloc_chunk+0x54f/0xb80
btrfs_chunk_alloc+0x18e/0x3a0
find_free_extent+0xdf6/0x1210
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb0/0x310
alloc_tree_block_no_bg_flush+0x4a/0x60
__btrfs_cow_block+0x11a/0x530
btrfs_cow_block+0x104/0x220
btrfs_search_slot+0x52e/0x9d0
btrfs_insert_empty_items+0x64/0xb0
btrfs_new_inode+0x225/0x730
btrfs_create+0xab/0x1f0
lookup_open.isra.0+0x52d/0x690
path_openat+0x2a7/0x9e0
do_filp_open+0x75/0x100
do_sys_openat2+0x7b/0x130
__x64_sys_openat+0x46/0x70
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x7e/0x7e0
btrfs_chunk_alloc+0x125/0x3a0
find_free_extent+0xdf6/0x1210
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb0/0x310
alloc_tree_block_no_bg_flush+0x4a/0x60
__btrfs_cow_block+0x11a/0x530
btrfs_cow_block+0x104/0x220
btrfs_search_slot+0x52e/0x9d0
btrfs_lookup_inode+0x2a/0x8f
__btrfs_update_delayed_inode+0x80/0x240
btrfs_commit_inode_delayed_inode+0x119/0x120
btrfs_evict_inode+0x357/0x500
evict+0xcf/0x1f0
do_unlinkat+0x1a9/0x2b0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&delayed_node->mutex){+.+.}-{3:3}:
__lock_acquire+0x119c/0x1fc0
lock_acquire+0xa7/0x3d0
__mutex_lock+0x7e/0x7e0
__btrfs_release_delayed_node.part.0+0x3f/0x330
btrfs_evict_inode+0x24c/0x500
evict+0xcf/0x1f0
dispose_list+0x48/0x70
prune_icache_sb+0x44/0x50
super_cache_scan+0x161/0x1e0
do_shrink_slab+0x178/0x3c0
shrink_slab+0x17c/0x290
shrink_node+0x2b2/0x6d0
balance_pgdat+0x30a/0x670
kswapd+0x213/0x4c0
kthread+0x138/0x160
ret_from_fork+0x1f/0x30

  other info that might help us debug this:

  Chain exists of:
    &delayed_node->mutex --> kernfs_mutex --> fs_reclaim

   Possible unsafe locking scenario:

CPU0                    CPU1
----                    ----
    lock(fs_reclaim);
lock(kernfs_mutex);
lock(fs_reclaim);
    lock(&delayed_node->mutex);

   *** DEADLOCK ***

  3 locks held by kswapd0/100:
   #0: ffffffff9fd74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
   #1: ffffffff9fd65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290
   #2: ffff9706629780e0 (&type->s_umount_key#36){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0

  stack backtrace:
  CPU: 1 PID: 100 Comm: kswapd0 Not tainted 5.9.0-rc3+ #5
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Call Trace:
   dump_stack+0x8b/0xb8
   check_noncircular+0x12d/0x150
   __lock_acquire+0x119c/0x1fc0
   lock_acquire+0xa7/0x3d0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   __mutex_lock+0x7e/0x7e0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   ? lock_acquire+0xa7/0x3d0
   ? find_held_lock+0x2b/0x80
   __btrfs_release_delayed_node.part.0+0x3f/0x330
   btrfs_evict_inode+0x24c/0x500
   evict+0xcf/0x1f0
   dispose_list+0x48/0x70
   prune_icache_sb+0x44/0x50
   super_cache_scan+0x161/0x1e0
   do_shrink_slab+0x178/0x3c0
   shrink_slab+0x17c/0x290
   shrink_node+0x2b2/0x6d0
   balance_pgdat+0x30a/0x670
   kswapd+0x213/0x4c0
   ? _raw_spin_unlock_irqrestore+0x41/0x50
   ? add_wait_queue_exclusive+0x70/0x70
   ? balance_pgdat+0x670/0x670
   kthread+0x138/0x160
   ? kthread_create_worker_on_cpu+0x40/0x40
   ret_from_fork+0x1f/0x30

This happens because when we link in a block group with a new raid index
type we'll create the corresponding sysfs entries for it.  This is
problematic because while restriping we're holding the chunk_mutex, and
while mounting we're holding the tree locks.

Fixing this isn't pretty, we move the call to the sysfs stuff into the
btrfs_create_pending_block_groups() work, where we're not holding any
locks.  This creates a slight race where other threads could see that
there's no sysfs kobj for that raid type, and race to create the
sysfs dir.  Fix this by wrapping the creation in space_info->lock, so we
only get one thread calling kobject_add() for the new directory.  We
don't worry about the lock on cleanup as it only gets deleted on
unmount.

On mount it's more straightforward, we loop through the space_infos
already, just check every raid index in each space_info and added the
sysfs entries for the corresponding block groups.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: kill the RCU protection for fs_info->space_info

We have this thing wrapped in an RCU lock, but it's really not needed.
We create all the space_info's on mount, and we destroy them on unmount.
The list never changes and we're protected from messing with it by the
normal mount/umount path, so kill the RCU stuff around it.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: improve error message in setup_items_for_insert

Reword and update formats to match variable types.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update formats ]
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add kerneldoc for setup_items_for_insert

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: sink total_data parameter in setup_items_for_insert

That parameter can easily be derived based on the "data_size" and "nr"
parameters exploit this fact to simply the function's signature. No
functional changes.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: eliminate total_size parameter from setup_items_for_insert

The value of this argument can be derived from the total_data as it's
simply the value of the data size + size of btrfs_items being touched.
Move the parameter calculation inside the function. This results in a
simpler interface and also a minor size reduction:

./scripts/bloat-o-meter ctree.original fs/btrfs/ctree.o
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-34 (-34)
Function                                     old     new   delta
btrfs_duplicate_item                         260     259      -1
setup_items_for_insert                      1200    1190     -10
btrfs_insert_empty_items                     177     154     -23

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: re-arrange statements in setup_items_for_insert

Rearrange statements calculating the offset of the newly added items so
that the calculation has to be done only once. No functional change.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: sysfs: export supported send stream version

This reports the latest send stream version supported by the kernel as
the feature in /sys/fs/btrfs/features/send_stream_version .

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: use btrfs_file_extent_end() in send_write_or_clone()

send_write_or_clone() basically has an open-coded copy of
btrfs_file_extent_end() except that it (incorrectly) aligns to PAGE_SIZE
instead of sectorsize. Fix and simplify the code by using
btrfs_file_extent_end().

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: avoid copying file data

send_write() currently copies from the page cache to sctx->read_buf, and
then from sctx->read_buf to sctx->send_buf. Similarly, send_hole()
zeroes sctx->read_buf and then copies from sctx->read_buf to
sctx->send_buf. However, if we write the TLV header manually, we can
copy to sctx->send_buf directly and get rid of sctx->read_buf.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: send: get rid of i_size logic in send_write()

send_write()/fill_read_buf() have some logic for avoiding reading past
i_size. However, everywhere that we call
send_write()/send_extent_data(), we've already clamped the length down
to i_size. Get rid of the i_size handling, which simplifies the next
change.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rename btrfs_insert_clone_extent() to a more generic name

Now that we use the same mechanism to replace all the extents in a file
range with either a hole, an existing extent (when cloning) or a new
extent (when using fallocate), the name of btrfs_insert_clone_extent()
no longer reflects its genericity.

So rename it to btrfs_insert_replace_extent(), since what it does is
to either insert an existing extent or a new extent into a file range.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rename btrfs_punch_hole_range() to a more generic name

The function btrfs_punch_hole_range() is now used to replace all the file
extents in a given file range with an extent described in the given struct
btrfs_replace_extent_info argument. This extent can either be an existing
extent that is being cloned or it can be a new extent (namely a prealloc
extent). When that argument is NULL it only punches a hole (drops all the
existing extents) in the file range.

So rename the function to btrfs_replace_file_extents().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rename struct btrfs_clone_extent_info to a more generic name

Now that we can use btrfs_clone_extent_info to convey information for a
new prealloc extent as well, and not just for existing extents that are
being cloned, rename it to btrfs_replace_extent_info, which reflects the
fact that this is now more generic and it is used to replace all existing
extents in a file range with the extent described by the structure.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove item_size member of struct btrfs_clone_extent_info

The value of item_size of struct btrfs_clone_extent_info is always set to
the size of a non-inline file extent item, and in fact the infrastructure
that uses this structure (btrfs_punch_hole_range()) does not work with
inline file extents at all (and it is not supposed to).

So just remove that field from the structure and use directly
sizeof(struct btrfs_file_extent_item) instead. Also assert that the
file extent type is not inline at btrfs_insert_clone_extent().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix metadata reservation for fallocate that leads to transaction aborts

When doing an fallocate(), specially a zero range operation, we assume
that reserving 3 units of metadata space is enough, that at most we touch
one leaf in subvolume/fs tree for removing existing file extent items and
inserting a new file extent item. This assumption is generally true for
most common use cases. However when we end up needing to remove file extent
items from multiple leaves, we can end up failing with -ENOSPC and abort
the current transaction, turning the filesystem to RO mode. When this
happens a stack trace like the following is dumped in dmesg/syslog:

[ 1500.620934] ------------[ cut here ]------------
[ 1500.620938] BTRFS: Transaction aborted (error -28)
[ 1500.620973] WARNING: CPU: 2 PID: 30807 at fs/btrfs/inode.c:9724 __btrfs_prealloc_file_range+0x512/0x570 [btrfs]
[ 1500.620974] Modules linked in: btrfs intel_rapl_msr intel_rapl_common kvm_intel (...)
[ 1500.621010] CPU: 2 PID: 30807 Comm: xfs_io Tainted: G        W         5.9.0-rc3-btrfs-next-67 #1
[ 1500.621012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 1500.621023] RIP: 0010:__btrfs_prealloc_file_range+0x512/0x570 [btrfs]
[ 1500.621026] Code: 8b 40 50 f0 48 (...)
[ 1500.621028] RSP: 0018:ffffb05fc8803ca0 EFLAGS: 00010286
[ 1500.621030] RAX: 0000000000000000 RBX: ffff9608af276488 RCX: 0000000000000000
[ 1500.621032] RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff
[ 1500.621033] RBP: ffffb05fc8803d90 R08: 0000000000000001 R09: 0000000000000001
[ 1500.621035] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000003200000
[ 1500.621037] R13: 00000000ffffffe4 R14: ffff9608af275fe8 R15: ffff9608af275f60
[ 1500.621039] FS:  00007fb5b2368ec0(0000) GS:ffff9608b6600000(0000) knlGS:0000000000000000
[ 1500.621041] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1500.621043] CR2: 00007fb5b2366fb8 CR3: 0000000202d38005 CR4: 00000000003706e0
[ 1500.621046] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1500.621047] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1500.621049] Call Trace:
[ 1500.621076]  btrfs_prealloc_file_range+0x10/0x20 [btrfs]
[ 1500.621087]  btrfs_fallocate+0xccd/0x1280 [btrfs]
[ 1500.621108]  vfs_fallocate+0x14d/0x290
[ 1500.621112]  ksys_fallocate+0x3a/0x70
[ 1500.621117]  __x64_sys_fallocate+0x1a/0x20
[ 1500.621120]  do_syscall_64+0x33/0x80
[ 1500.621123]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1500.621126] RIP: 0033:0x7fb5b248c477
[ 1500.621128] Code: 89 7c 24 08 (...)
[ 1500.621130] RSP: 002b:00007ffc7bee9060 EFLAGS: 00000293 ORIG_RAX: 000000000000011d
[ 1500.621132] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fb5b248c477
[ 1500.621134] RDX: 0000000000000000 RSI: 0000000000000010 RDI: 0000000000000003
[ 1500.621136] RBP: 0000557718faafd0 R08: 0000000000000000 R09: 0000000000000000
[ 1500.621137] R10: 0000000003200000 R11: 0000000000000293 R12: 0000000000000010
[ 1500.621139] R13: 0000557718faafb0 R14: 0000557718faa480 R15: 0000000000000003
[ 1500.621151] irq event stamp: 1026217
[ 1500.621154] hardirqs last  enabled at (1026223): [<ffffffffba965570>] console_unlock+0x500/0x5c0
[ 1500.621156] hardirqs last disabled at (1026228): [<ffffffffba9654c7>] console_unlock+0x457/0x5c0
[ 1500.621159] softirqs last  enabled at (1022486): [<ffffffffbb6003dc>] __do_softirq+0x3dc/0x606
[ 1500.621161] softirqs last disabled at (1022477): [<ffffffffbb4010b2>] asm_call_on_stack+0x12/0x20
[ 1500.621162] ---[ end trace 2955b08408d8b9d4 ]---
[ 1500.621167] BTRFS: error (device sdj) in __btrfs_prealloc_file_range:9724: errno=-28 No space left

When we use fallocate() internally, for reserving an extent for a space
cache, inode cache or relocation, we can't hit this problem since either
there aren't any file extent items to remove from the subvolume tree or
there is at most one.

When using plain fallocate() it's very unlikely, since that would require
having many file extent items representing holes for the target range and
crossing multiple leafs - we attempt to increase the range (merge) of such
file extent items when punching holes, so at most we end up with 2 file
extent items for holes at leaf boundaries.

However when using the zero range operation of fallocate() for a large
range (100+ MiB for example) that's fairly easy to trigger. The following
example reproducer triggers the issue:

  $ cat reproducer.sh
  #!/bin/bash

  umount /dev/sdj &> /dev/null
  mkfs.btrfs -f -n 16384 -O ^no-holes /dev/sdj > /dev/null
  mount /dev/sdj /mnt/sdj

  # Create a 100M file with many file extent items. Punch a hole every 8K
  # just to speedup the file creation - we could do 4K sequential writes
  # followed by fsync (or O_SYNC) as well, but that takes a lot of time.
  file_size=$((100 * 1024 * 1024))
  xfs_io -f -c "pwrite -S 0xab -b 10M 0 $file_size" /mnt/sdj/foobar
  for ((i = 0; i < $file_size; i += 8192)); do
      xfs_io -c "fpunch $i 4096" /mnt/sdj/foobar
  done

  # Force a transaction commit, so the zero range operation will be forced
  # to COW all metadata extents it need to touch.
  sync

  xfs_io -c "fzero 0 $file_size" /mnt/sdj/foobar

  umount /mnt/sdj

  $ ./reproducer.sh
  wrote 104857600/104857600 bytes at offset 0
  100 MiB, 10 ops; 0.0669 sec (1.458 GiB/sec and 149.3117 ops/sec)
  fallocate: No space left on device

  $ dmesg
  <shows the same stack trace pasted before>

To fix this use the existing infrastructure that hole punching and
extent cloning use for replacing a file range with another extent. This
deals with doing the removal of file extent items and inserting the new
one using an incremental approach, reserving more space when needed and
always ensuring we don't leave an implicit hole in the range in case
we need to do multiple iterations and a crash happens between iterations.

A test case for fstests will follow up soon.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove unused function calc_global_rsv_need_space()

It is not used since commit 0096420adb03 ("btrfs: do not
account global reserve in can_overcommit").

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: move btrfs_dev_replace_update_device_in_mapping_tree to drop declaration

The function is short and simple, we can get rid of the declaration as
it's not necessary for a static function. Move it before its first
caller. No functional changes.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: simplify gotos in open_seed_device

The function does not have a common exit block and returns immediatelly
so there's no point having the goto. Remove the two cases.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove unnecessary tmp variable in btrfs_assign_next_active_device()

We can check the argument value directly, no need for the temporary
variable.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove tmp variable for list traversal in btrfs_init_dev_replace_tgtdev

In the function btrfs_init_dev_replace_tgtdev(), the local variable
devices is used only once, we can remove it.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use sprout device_list_mutex in btrfs_init_devices_late

On a mounted sprout filesystem, all threads now are using the
sprout::device_list_mutex, and this is the only code using the
seed::device_list_mutex. This patch converts to use the sprouts
fs_info->fs_devices->device_list_mutex.

The same reasoning holds true here, that device delete is holding
the sprout::device_list_mutex.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: reada: lock all seed/sprout devices in __reada_start_machine

On an fs mounted using a sprout device, the seed fs_devices are
maintained in a linked list under fs_info->fs_devices. Each seeds
fs_devices also has device_list_mutex initialized to protect against the
potential race with delete threads. But the delete thread (at
btrfs_rm_device()) is holding the fs_info::fs_devices::device_list_mutex
mutex which belongs to sprout device_list_mutex instead of seed
device_list_mutex. Moreover, there aren't any significient benefits in
using the seed::device_list_mutex instead of sprout::device_list_mutex.

So this patch converts them of using the seed::device_list_mutex to
sprout::device_list_mutex.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: handle errors in btrfs_sysfs_add_fs_devices

btrfs_sysfs_add_fs_devices() is called by btrfs_sysfs_add_mounted().
btrfs_sysfs_add_mounted() assumes that btrfs_sysfs_add_fs_devices() will
either add sysfs entries for all the devices or none. So this patch keeps up
to its caller expecatation and cleans up the created sysfs entries if it
has to fail at some device in the list.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: initialize sysfs devid and device link for seed device

We don't initialize the sysfs devid kobject and device-link yet for the
seed devices in an sprouted filesystem.
So this patch initializes the seed device devid kobject and the device
link in the sysfs.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: split and refactor btrfs_sysfs_remove_devices_dir

Similar to btrfs_sysfs_add_devices_dir()'s refactoring, split
btrfs_sysfs_remove_devices_dir() so that we don't have to use the device
argument to indicate whether to free all devices or just one device.

Export btrfs_sysfs_remove_device() as device operations outside of
sysfs.c now calls this instead of btrfs_sysfs_remove_devices_dir().

btrfs_sysfs_remove_devices_dir() is renamed to
btrfs_sysfs_remove_fs_devices() to suite its new role.

Now, no one outside of sysfs.c calls btrfs_sysfs_remove_fs_devices()
so it is redeclared s static. And the same function had to be moved
before its first caller.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: simplify parameters of btrfs_sysfs_add_devices_dir

When we add a device we need to add it to sysfs, so instead of using the
btrfs_sysfs_add_devices_dir() fs_devices argument to specify whether to
add a device or all of fs_devices, call the helper function directly
btrfs_sysfs_add_device() and thus make it non-static.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make btrfs_sysfs_remove_devices_dir return void

btrfs_sysfs_remove_devices_dir() return value is unused declare it as
void.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add btrfs_sysfs_remove_device helper

btrfs_sysfs_remove_devices_dir() removes device link and devid kobject
(sysfs entries) for a device or all the devices in the btrfs_fs_devices.
In preparation to remove these sysfs entries for the seed as well, add
a btrfs_sysfs_remove_device() helper function and avoid code
duplication.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add btrfs_sysfs_add_device helper

btrfs_sysfs_add_devices_dir() adds device link and devid kobject
(sysfs entries) for a device or all the devices in the btrfs_fs_devices.
In preparation to add these sysfs entries for the seed as well, add
a btrfs_sysfs_add_device() helper function and avoid code duplication.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: fix replace of seed device

If you replace a seed device in a sprouted fs, it appears to have
successfully replaced the seed device, but if you look closely, it
didn't.  Here is an example.

  $ mkfs.btrfs /dev/sda
  $ btrfstune -S1 /dev/sda
  $ mount /dev/sda /btrfs
  $ btrfs device add /dev/sdb /btrfs
  $ umount /btrfs
  $ btrfs device scan --forget
  $ mount -o device=/dev/sda /dev/sdb /btrfs
  $ btrfs replace start -f /dev/sda /dev/sdc /btrfs
  $ echo $?
  0

  BTRFS info (device sdb): dev_replace from /dev/sda (devid 1) to /dev/sdc started
  BTRFS info (device sdb): dev_replace from /dev/sda (devid 1) to /dev/sdc finished

  $ btrfs fi show
  Label: none  uuid: ab2c88b7-be81-4a7e-9849-c3666e7f9f4f
  Total devices 2 FS bytes used 256.00KiB
  devid    1 size 3.00GiB used 520.00MiB path /dev/sdc
  devid    2 size 3.00GiB used 896.00MiB path /dev/sdb

  Label: none  uuid: 10bd3202-0415-43af-96a8-d5409f310a7e
  Total devices 1 FS bytes used 128.00KiB
  devid    1 size 3.00GiB used 536.00MiB path /dev/sda

So as per the replace start command and kernel log replace was successful.
Now let's try to clean mount.

  $ umount /btrfs
  $ btrfs device scan --forget

  $ mount -o device=/dev/sdc /dev/sdb /btrfs
  mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error.

  [  636.157517] BTRFS error (device sdc): failed to read chunk tree: -2
  [  636.180177] BTRFS error (device sdc): open_ctree failed

That's because per dev items it is still looking for the original seed
device.

$ btrfs inspect-internal dump-tree -d /dev/sdb

item 0 key (DEV_ITEMS DEV_ITEM 1) itemoff 16185 itemsize 98
devid 1 total_bytes 3221225472 bytes_used 545259520
io_align 4096 io_width 4096 sector_size 4096 type 0
generation 6 start_offset 0 dev_group 0
seek_speed 0 bandwidth 0
uuid 59368f50-9af2-4b17-91da-8a783cc418d4  <--- seed uuid
fsid 10bd3202-0415-43af-96a8-d5409f310a7e  <--- seed fsid
item 1 key (DEV_ITEMS DEV_ITEM 2) itemoff 16087 itemsize 98
devid 2 total_bytes 3221225472 bytes_used 939524096
io_align 4096 io_width 4096 sector_size 4096 type 0
generation 0 start_offset 0 dev_group 0
seek_speed 0 bandwidth 0
uuid 56a0a6bc-4630-4998-8daf-3c3030c4256a  <- sprout uuid
fsid ab2c88b7-be81-4a7e-9849-c3666e7f9f4f <- sprout fsid

But the replaced target has the following uuid+fsid in its superblock
which doesn't match with the expected uuid+fsid in its devitem.

  $ btrfs in dump-super /dev/sdc | egrep '^generation|dev_item.uuid|dev_item.fsid|devid'
  generation 20
  dev_item.uuid 59368f50-9af2-4b17-91da-8a783cc418d4
  dev_item.fsid ab2c88b7-be81-4a7e-9849-c3666e7f9f4f [match]
  dev_item.devid 1

So if you provide the original seed device the mount shall be
successful.  Which so long happening in the test case btrfs/163.

  $ btrfs device scan --forget
  $ mount -o device=/dev/sda /dev/sdb /btrfs

Fix in this patch:
If a seed is not sprouted then there is no replacement of it, because of
its read-only filesystem with a read-only device. Similarly, in the case
of a sprouted filesystem, the seed device is still read only. So, mark
it as you can't replace a seed device, you can only add a new device and
then delete the seed device. If replace is attempted then returns
-EINVAL.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: improve device scanning messages

Systems booting without the initramfs seems to scan an unusual kind
of device path (/dev/root). And at a later time, the device is updated
to the correct path. We generally print the process name and PID of the
process scanning the device but we don't capture the same information if
the device path is rescanned with a different pathname.

The current message is too long, so drop the unnecessary UUID and add
process name and PID.

While at this also update the duplicate device warning to include the
process name and PID so the messages are consistent

CC: stable@vger.kernel.org # 4.19+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=89721
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: pretty print leaked root name

I'm a actual human being so am incapable of converting u64 to s64 in my
head, so add a helper to get the pretty name of a root objectid and use
that helper to spit out the name for any special roots for leaked roots,
so I don't have to scratch my head and figure out which root I messed up
the refs for.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: sysfs: export currently running exclusive operation

/sys/fs/<fsid>/exclusive_operation contains the currently executing
exclusive operation. Add a sysfs_notify() when operation end, so
userspace can be notified of exclusive operation is finished.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: enumerate the type of exclusive operation in progress

Instead of using a flag bit for exclusive operation, use a variable to
store which exclusive operation is being performed. Introduce an API
to start and finish an exclusive operation.

This would enable another way for tools to check which operation is
running on why starting an exclusive operation failed. The followup
patch adds a sysfs_notify() to alert userspace when the state changes, so
userspace can perform select() on it to get notified of the change.

This would enable us to enqueue a command which will wait for current
exclusive operation to complete before issuing the next exclusive
operation. This has been done synchronously as opposed to a background
process, or else error collection (if any) will become difficult.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comments ]
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: sysfs: init devices outside of the chunk_mutex

While running btrfs/061, btrfs/073, btrfs/078, or btrfs/178 we hit the
following lockdep splat:

  ======================================================
  WARNING: possible circular locking dependency detected
  5.9.0-rc3+ #4 Not tainted
  ------------------------------------------------------
  kswapd0/100 is trying to acquire lock:
  ffff96ecc22ef4a0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x330

  but task is already holding lock:
  ffffffff8dd74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #3 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0x65/0x80
slab_pre_alloc_hook.constprop.0+0x20/0x200
kmem_cache_alloc+0x37/0x270
alloc_inode+0x82/0xb0
iget_locked+0x10d/0x2c0
kernfs_get_inode+0x1b/0x130
kernfs_get_tree+0x136/0x240
sysfs_get_tree+0x16/0x40
vfs_get_tree+0x28/0xc0
path_mount+0x434/0xc00
__x64_sys_mount+0xe3/0x120
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #2 (kernfs_mutex){+.+.}-{3:3}:
__mutex_lock+0x7e/0x7e0
kernfs_add_one+0x23/0x150
kernfs_create_link+0x63/0xa0
sysfs_do_create_link_sd+0x5e/0xd0
btrfs_sysfs_add_devices_dir+0x81/0x130
btrfs_init_new_device+0x67f/0x1250
btrfs_ioctl+0x1ef/0x2e20
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__mutex_lock+0x7e/0x7e0
btrfs_chunk_alloc+0x125/0x3a0
find_free_extent+0xdf6/0x1210
btrfs_reserve_extent+0xb3/0x1b0
btrfs_alloc_tree_block+0xb0/0x310
alloc_tree_block_no_bg_flush+0x4a/0x60
__btrfs_cow_block+0x11a/0x530
btrfs_cow_block+0x104/0x220
btrfs_search_slot+0x52e/0x9d0
btrfs_insert_empty_items+0x64/0xb0
btrfs_insert_delayed_items+0x90/0x4f0
btrfs_commit_inode_delayed_items+0x93/0x140
btrfs_log_inode+0x5de/0x2020
btrfs_log_inode_parent+0x429/0xc90
btrfs_log_new_name+0x95/0x9b
btrfs_rename2+0xbb9/0x1800
vfs_rename+0x64f/0x9f0
do_renameat2+0x320/0x4e0
__x64_sys_rename+0x1f/0x30
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&delayed_node->mutex){+.+.}-{3:3}:
__lock_acquire+0x119c/0x1fc0
lock_acquire+0xa7/0x3d0
__mutex_lock+0x7e/0x7e0
__btrfs_release_delayed_node.part.0+0x3f/0x330
btrfs_evict_inode+0x24c/0x500
evict+0xcf/0x1f0
dispose_list+0x48/0x70
prune_icache_sb+0x44/0x50
super_cache_scan+0x161/0x1e0
do_shrink_slab+0x178/0x3c0
shrink_slab+0x17c/0x290
shrink_node+0x2b2/0x6d0
balance_pgdat+0x30a/0x670
kswapd+0x213/0x4c0
kthread+0x138/0x160
ret_from_fork+0x1f/0x30

  other info that might help us debug this:

  Chain exists of:
    &delayed_node->mutex --> kernfs_mutex --> fs_reclaim

   Possible unsafe locking scenario:

CPU0                    CPU1
----                    ----
    lock(fs_reclaim);
lock(kernfs_mutex);
lock(fs_reclaim);
    lock(&delayed_node->mutex);

   *** DEADLOCK ***

  3 locks held by kswapd0/100:
   #0: ffffffff8dd74700 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
   #1: ffffffff8dd65c50 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x115/0x290
   #2: ffff96ed2ade30e0 (&type->s_umount_key#36){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0

  stack backtrace:
  CPU: 0 PID: 100 Comm: kswapd0 Not tainted 5.9.0-rc3+ #4
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Call Trace:
   dump_stack+0x8b/0xb8
   check_noncircular+0x12d/0x150
   __lock_acquire+0x119c/0x1fc0
   lock_acquire+0xa7/0x3d0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   __mutex_lock+0x7e/0x7e0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   ? __btrfs_release_delayed_node.part.0+0x3f/0x330
   ? lock_acquire+0xa7/0x3d0
   ? find_held_lock+0x2b/0x80
   __btrfs_release_delayed_node.part.0+0x3f/0x330
   btrfs_evict_inode+0x24c/0x500
   evict+0xcf/0x1f0
   dispose_list+0x48/0x70
   prune_icache_sb+0x44/0x50
   super_cache_scan+0x161/0x1e0
   do_shrink_slab+0x178/0x3c0
   shrink_slab+0x17c/0x290
   shrink_node+0x2b2/0x6d0
   balance_pgdat+0x30a/0x670
   kswapd+0x213/0x4c0
   ? _raw_spin_unlock_irqrestore+0x41/0x50
   ? add_wait_queue_exclusive+0x70/0x70
   ? balance_pgdat+0x670/0x670
   kthread+0x138/0x160
   ? kthread_create_worker_on_cpu+0x40/0x40
   ret_from_fork+0x1f/0x30

This happens because we are holding the chunk_mutex at the time of
adding in a new device.  However we only need to hold the
device_list_mutex, as we're going to iterate over the fs_devices
devices.  Move the sysfs init stuff outside of the chunk_mutex to get
rid of this lockdep splat.

CC: stable@vger.kernel.org # 4.4.x: f3cd2c58110dad14e: btrfs: sysfs, rename device_link add/remove functions
CC: stable@vger.kernel.org # 4.4.x
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make extent_fiemap take btrfs_inode

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make btrfs_zero_range_check_range_boundary take btrfs_inode

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make copy_inline_to_page take btrfs_inode

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make btrfs_find_ordered_sum take btrfs_inode

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make get_extent_skip_holes take btrfs_inode

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make btrfs_writepage_endio_finish_ordered btrfs_inode-centric

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make btrfs_invalidatepage work on btrfs_inode

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: convert btrfs_inode_sectorsize to take btrfs_inode

It's counterintuitive to have a function named btrfs_inode_xxx which
takes a generic inode. Also move the function to btrfs_inode.h so that
it has access to the definition of struct btrfs_inode.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make btrfs_dec_test_ordered_pending take btrfs_inode

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make ordered extent tracepoint take btrfs_inode

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make btrfs_lookup_first_ordered_extent take btrfs_inode

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make inode_tree_del take btrfs_inode

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use BTRFS_NESTED_NEW_ROOT for double splits

I've made this change separate since it requires both of the newly added
NESTED flags and I didn't want to slip it into one of those changes.

If we do a double split of a node we can end up doing a
BTRFS_NESTED_SPLIT on level 0, which throws lockdep off because it
appears as a double lock. Since we're maxed out on subclasses, use
BTRFS_NESTED_NEW_ROOT if we had to do a double split. This is OK
because we won't have to do a double split if we had to insert a new
root, and the new root would be at a higher level anyway.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: introduce BTRFS_NESTING_NEW_ROOT for adding new roots

The way we add new roots is confusing from a locking perspective for
lockdep.  We generally have the rule that we lock things in order from
highest level to lowest, but in the case of adding a new level to the
tree we actually allocate a new block for the root, which makes the
locking go in reverse.  A similar issue exists for snapshotting, we cow
the original root for the root of a new tree, however they're at the
same level.  Address this by using BTRFS_NESTING_NEW_ROOT for these
operations.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: introduce BTRFS_NESTING_SPLIT for split blocks

If we are splitting a leaf/node, we could do something like the
following

lock(leaf)  BTRFS_NESTING_NORMAL
  lock(left) BTRFS_NESTING_LEFT + BTRFS_NESTING_COW
    push from leaf -> left
      reset path to point to left
        split left
          allocate new block, lock block BTRFS_NESTING_SPLIT

at the new block point we need to have a different nesting level,
because we have already used either BTRFS_NESTING_LEFT or
BTRFS_NESTING_RIGHT when pushing items from the original leaf into the
adjacent leaves.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: introduce BTRFS_NESTING_LEFT/RIGHT_COW

For similar reasons as BTRFS_NESTING_COW, we need
BTRFS_NESTING_LEFT/RIGHT_COW.  The pattern is this

lock leaf -> BTRFS_NESTING_NORMAL
  cow leaf -> BTRFS_NESTING_COW
    split leaf
      lock left -> BTRFS_NESTING_LEFT
        cow left -> BTRFS_NESTING_LEFT_COW

We need this in order to indicate to lockdep that these locks are
discrete and are being taken in a safe order.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: introduce BTRFS_NESTING_LEFT/BTRFS_NESTING_RIGHT

Our lockdep maps are based on rootid+level, however in some cases we
will lock adjacent blocks on the same level, namely in searching forward
or in split/balance.  Because of this lockdep will complain, so we need
a separate subclass to indicate to lockdep that these are different
locks.

lock leaf -> BTRFS_NESTING_NORMAL
  cow leaf -> BTRFS_NESTING_COW
    split leaf
       lock left -> BTRFS_NESTING_LEFT
       lock right -> BTRFS_NESTING_RIGHT

The above graph illustrates the need for this new nesting subclass.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: introduce BTRFS_NESTING_COW for cow'ing blocks

When we COW a block we are holding a lock on the original block, and
then we lock the new COW block. Because our lockdep maps are based on
root + level, this will make lockdep complain. We need a way to
indicate a subclass for locking the COW'ed block, so plumb through our
btrfs_lock_nesting from btrfs_cow_block down to the btrfs_init_buffer,
and then introduce BTRFS_NESTING_COW to be used for cow'ing blocks.

The reason I've added all this extra infrastructure is because there
will be need of different nesting classes in follow up patches.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: add nesting tags to the locking helpers

We will need these when we switch to an rwsem, so plumb in the
infrastructure here to use later on. I violate the 80 character limit
some here because it'll be cleaned up later.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: introduce btrfs_path::recurse

Our current tree locking stuff allows us to recurse with read locks if
we're already holding the write lock.  This is necessary for the space
cache inode, as we could be holding a lock on the root_tree root when we
need to cache a block group, and thus need to be able to read down the
root_tree to read in the inode cache.

We can get away with this in our current locking, but we won't be able
to with a rwsem.  Handle this by purposefully annotating the places
where we require recursion, so that in the future we can maybe come up
with a way to avoid the recursion.  In the case of the free space inode,
this will be superseded by the free space tree.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rename extent_buffer::lock_nested to extent_buffer::lock_recursed

Nested locking with lockdep and everything else refers to lock hierarchy
within the same lock map. This is how we indicate the same locks for
different objects are ok to take in a specific order, for our use case
that would be to take the lock on a leaf and then take a lock on an
adjacent leaf.

What ->lock_nested _actually_ refers to is if we happen to already be
holding the write lock on the extent buffer and we're allowing a read
lock to be taken on that extent buffer, which is recursion. Rename this
so we don't get confused when we switch to a rwsem and have to start
using the _nested helpers.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: don't opencode sync_blockdev in btrfs_init_new_device

Instead of opencoding filemap_write_and_wait simply call syncblockdev as
it makes it abundantly clear what's going on and why this is used. No
semantics changes.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove redundant code from btrfs_free_stale_devices

Following the refactor of btrfs_free_stale_devices in
7bcb8164ad94 ("btrfs: use device_list_mutex when removing stale devices")
fs_devices are freed after they have been iterated by the inner
list_for_each so the use-after-free fixed by introducing the break in
fd649f10c3d2 ("btrfs: Fix use-after-free when cleaning up fs_devs with
a single stale device") is no longer necessary. Just remove it
altogether. No functional changes.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: refactor locked condition in btrfs_init_new_device

Invert unlocked to locked and exploit the fact it can only ever be
modified if we are adding a new device to a seed filesystem. This allows
to simplify the check in error: label. No semantics changes.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: use RCU for quick device check in btrfs_init_new_device

When adding a new device there's a mandatory check to see if a device is
being duplicated to the filesystem it's added to. Since this is a
read-only operations not necessary to take device_list_mutex and can simply
make do with an rcu-readlock.

Using just RCU is safe because there won't be another device add delete
running in parallel as btrfs_init_new_device is called only from
btrfs_ioctl_add_dev.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: ctree: check key order before merging tree blocks

[BUG]
With a crafted image, btrfs can panic at btrfs_del_csums():

  kernel BUG at fs/btrfs/ctree.c:3188!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 0 PID: 1156 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9
  RIP: 0010:btrfs_set_item_key_safe+0x16c/0x180
  RSP: 0018:ffff976141257ab8 EFLAGS: 00010202
  RAX: 0000000000000001 RBX: ffff898a6b890930 RCX: 0000000004b70000
  RDX: 0000000000000000 RSI: ffff976141257bae RDI: ffff976141257acf
  RBP: ffff976141257b10 R08: 0000000000001000 R09: ffff9761412579a8
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff976141257abe
  R13: 0000000000000003 R14: ffff898a6a8be578 R15: ffff976141257bae
  FS: 0000000000000000(0000) GS:ffff898a77a00000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f779d9cd624 CR3: 000000022b2b4006 CR4: 00000000000206f0
  Call Trace:
  truncate_one_csum+0xac/0xf0
  btrfs_del_csums+0x24f/0x3a0
  __btrfs_free_extent.isra.72+0x5a7/0xbe0
  __btrfs_run_delayed_refs+0x539/0x1120
  btrfs_run_delayed_refs+0xdb/0x1b0
  btrfs_commit_transaction+0x52/0x950
  ? start_transaction+0x94/0x450
  transaction_kthread+0x163/0x190
  kthread+0x105/0x140
  ? btrfs_cleanup_transaction+0x560/0x560
  ? kthread_destroy_worker+0x50/0x50
  ret_from_fork+0x35/0x40
  Modules linked in:
  ---[ end trace 93bf9db00e6c374e ]---

[CAUSE]
This crafted image has a tricky key order corruption:

  checksum tree key (CSUM_TREE ROOT_ITEM 0)
  node 29741056 level 1 items 14 free 107 generation 19 owner CSUM_TREE
          ...
          key (EXTENT_CSUM EXTENT_CSUM 73785344) block 29757440 gen 19
          key (EXTENT_CSUM EXTENT_CSUM 77594624) block 29753344 gen 19
          ...

  leaf 29757440 items 5 free space 150 generation 19 owner CSUM_TREE
          item 0 key (EXTENT_CSUM EXTENT_CSUM 73785344) itemoff 2323 itemsize 1672
                  range start 73785344 end 75497472 length 1712128
          item 1 key (EXTENT_CSUM EXTENT_CSUM 75497472) itemoff 2319 itemsize 4
                  range start 75497472 end 75501568 length 4096
          item 2 key (EXTENT_CSUM EXTENT_CSUM 75501568) itemoff 579 itemsize 1740
                  range start 75501568 end 77283328 length 1781760
          item 3 key (EXTENT_CSUM EXTENT_CSUM 77283328) itemoff 575 itemsize 4
                  range start 77283328 end 77287424 length 4096
          item 4 key (EXTENT_CSUM EXTENT_CSUM 4120596480) itemoff 275 itemsize 300 <<<
                  range start 4120596480 end 4120903680 length 307200
  leaf 29753344 items 3 free space 1936 generation 19 owner CSUM_TREE
          item 0 key (18446744073457893366 EXTENT_CSUM 77594624) itemoff 2323 itemsize 1672
                  range start 77594624 end 79306752 length 1712128
          ...

Note the item 4 key of leaf 29757440, which is obviously too large, and
even larger than the first key of the next leaf.

However it still follows the key order in that tree block, thus tree
checker is unable to detect it at read time, since tree checker can only
work inside one leaf, thus such complex corruption can't be detected in
advance.

[FIX]
The next time to detect such problem is at tree block merge time,
which is in push_node_left(), balance_node_right(), push_leaf_left() or
push_leaf_right().

Now we check if the key order of the right-most key of the left node is
larger than the left-most key of the right node.

By this we don't need to call the full tree-checker, while still keeping
the key order correct as key order in each node is already checked by
tree checker thus we only need to check the above two slots.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202833
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: extent-tree: kill the BUG_ON() in insert_inline_extent_backref()

[BUG]
With a crafted image, btrfs can panic at insert_inline_extent_backref():

  kernel BUG at fs/btrfs/extent-tree.c:1857!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 0 PID: 1117 Comm: btrfs-transacti Not tainted 5.0.0-rc8+ #9
  RIP: 0010:insert_inline_extent_backref+0xcc/0xe0
  RSP: 0018:ffffac4dc1287be8 EFLAGS: 00010293
  RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000000001
  RDX: 0000000000001000 RSI: 0000000000000000 RDI: 0000000000000000
  RBP: ffffac4dc1287c28 R08: ffffac4dc1287ab8 R09: ffffac4dc1287ac0
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
  R13: ffff8febef88a540 R14: ffff8febeaa7bc30 R15: 0000000000000000
  FS: 0000000000000000(0000) GS:ffff8febf7a00000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f663ace94c0 CR3: 0000000235698006 CR4: 00000000000206f0
  Call Trace:
  ? _cond_resched+0x1a/0x50
  __btrfs_inc_extent_ref.isra.64+0x7e/0x240
  ? btrfs_merge_delayed_refs+0xa5/0x330
  __btrfs_run_delayed_refs+0x653/0x1120
  btrfs_run_delayed_refs+0xdb/0x1b0
  btrfs_commit_transaction+0x52/0x950
  ? start_transaction+0x94/0x450
  transaction_kthread+0x163/0x190
  kthread+0x105/0x140
  ? btrfs_cleanup_transaction+0x560/0x560
  ? kthread_destroy_worker+0x50/0x50
  ret_from_fork+0x35/0x40
  Modules linked in:
  ---[ end trace 2ad8b3de903cf825 ]---

[CAUSE]
Due to extent tree corruption (still valid by itself, but bad cross
ref), we can allocate an extent which is still in extent tree.  The
offending tree block of that case is from csum tree.  The newly
allocated tree block is also for csum tree.

Then we will try to insert a tree block ref for the existing tree block
ref.

For a tree extent item, tree block can never be shared directly by the
same tree twice.  We have such BUG_ON() to prevent such problem, but
this is not a proper error handling.

[FIX]
Replace that BUG_ON() with proper error message and leaf dump for debug
build.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202829
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: extent-tree: kill BUG_ON() in __btrfs_free_extent()

__btrfs_free_extent() is doing two things:

1. Reduce the refs number of an extent backref
   Either it's an inline extent backref (inside EXTENT/METADATA item) or
   a keyed extent backref (SHARED_* item).
   We only need to locate that backref line, either reduce the number or
   remove the backref line completely.

2. Update the refs count in EXTENT/METADATA_ITEM

During step 1), we will try to locate the EXTENT/METADATA_ITEM without
triggering another btrfs_search_slot() as fast path.

Only when we fail to locate that item, we will trigger another
btrfs_search_slot() to get that EXTENT/METADATA_ITEM after we
updated/deleted the backref line.

And we have a lot of strict checks on things like refs_to_drop against
extent refs and special case checks for single ref extents.

There are 7 BUG_ON()s, although they're doing correct checks, they can
be triggered by crafted images.

This patch improves the function:

- Introduce two examples to show what __btrfs_free_extent() is doing
  One inline backref case and one keyed case.  Should cover most cases.

- Kill all BUG_ON()s with proper error message and optional leaf dump

- Add comment to show the overall flow

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202819
[ The report triggers one BUG_ON() in __btrfs_free_extent() ]
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: extent_io: do extra check for extent buffer read write functions

Although we have start, len check for extent buffer reader/write (e.g.
read_extent_buffer()), these checks have limitations:

- No overflow check
  Values like start = 1024 len = -1024 can still pass the basic
   (start + len) > eb->len check.

- Checks are not consistent
  For read_extent_buffer() we only check (start + len) against eb->len.
  While for memcmp_extent_buffer() we also check start against eb->len.

- Different error reporting mechanism
  We use WARN() in read_extent_buffer() but BUG() in
  memcpy_extent_buffer().

- Still modify memory if the request is obviously wrong
  In read_extent_buffer() even we find (start + len) > eb->len, we still
  call memset(dst, 0, len), which can easily cause memory access error
  if start + len overflows.

To address above problems, this patch creates a new common function to
check such access, check_eb_range().

- Add overflow check
  This function checks start, start + len against eb->len and overflow
  check.

- Unified checks

- Unified error reports
  Will call WARN() if CONFIG_BTRFS_DEBUG is configured.
  And also do btrfs_warn() message for non-debug build.

- Exit ASAP if check fails
  No more possible memory corruption.

- Add extra comment for @start @len used in those functions as it's
  sometimes confused with the logical addressing instead of a range
  inside the eb space

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202817
[ Inspired by above report, the report itself is already addressed ]
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use check_add_overflow ]
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: rework error detection in init_tree_roots

To avoid duplicating 3 lines of code the error detection logic in
init_tree_roots is somewhat quirky. It first checks for the presence of
any error condition, then checks for the specific condition to perform
any specific actions. That's spurious because directly checking for
each respective error condition and doing the necessary steps is more
obvious. While at it change the -EUCLEAN to -EIO in case the extent
buffer is not read correctly, this is in line with other sites which
return -EIO when the eb couldn't be read.

Additionally it results in smaller code and the code reads
more linearly:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-95 (-95)
Function old new delta
open_ctree 17243 17148 -95
Total: Before=113104, After=113009, chg -0.08%

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations

[BUG]
When quota is enabled for TEST_DEV, generic/013 sometimes fails like this:

  generic/013 14s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//generic/013.dmesg)

And with the following metadata leak:

  BTRFS warning (device dm-3): qgroup 0/1370 has unreleased space, type 2 rsv 49152
  ------------[ cut here ]------------
  WARNING: CPU: 2 PID: 47912 at fs/btrfs/disk-io.c:4078 close_ctree+0x1dc/0x323 [btrfs]
  Call Trace:
   btrfs_put_super+0x15/0x17 [btrfs]
   generic_shutdown_super+0x72/0x110
   kill_anon_super+0x18/0x30
   btrfs_kill_super+0x17/0x30 [btrfs]
   deactivate_locked_super+0x3b/0xa0
   deactivate_super+0x40/0x50
   cleanup_mnt+0x135/0x190
   __cleanup_mnt+0x12/0x20
   task_work_run+0x64/0xb0
   __prepare_exit_to_usermode+0x1bc/0x1c0
   __syscall_return_slowpath+0x47/0x230
   do_syscall_64+0x64/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ---[ end trace a6cfd45ba80e4e06 ]---
  BTRFS error (device dm-3): qgroup reserved space leaked
  BTRFS info (device dm-3): disk space caching is enabled
  BTRFS info (device dm-3): has skinny extents

[CAUSE]
The qgroup preallocated meta rsv operations of that offending root are:

  btrfs_delayed_inode_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=131072
  btrfs_delayed_inode_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=131072
  btrfs_subvolume_reserve_metadata: rsv_meta_prealloc root=1370 num_bytes=49152
  btrfs_delayed_inode_release_metadata: convert_meta_prealloc root=1370 num_bytes=-131072
  btrfs_delayed_inode_release_metadata: convert_meta_prealloc root=1370 num_bytes=-131072

It's pretty obvious that, we reserve qgroup meta rsv in
btrfs_subvolume_reserve_metadata(), but doesn't have corresponding
release/convert calls in btrfs_subvolume_release_metadata().

This leads to the leakage.

[FIX]
To fix this bug, we should follow what we're doing in
btrfs_delalloc_reserve_metadata(), where we reserve qgroup space, and
add it to block_rsv->qgroup_rsv_reserved.

And free the qgroup reserved metadata space when releasing the
block_rsv.

To do this, we need to change the btrfs_subvolume_release_metadata() to
accept btrfs_root, and record the qgroup_to_release number, and call
btrfs_qgroup_convert_reserved_meta() for it.

Fixes: 733e03a0b26a ("btrfs: qgroup: Split meta rsv type into meta_prealloc and meta_pertrans")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: qgroup: fix wrong qgroup metadata reserve for delayed inode

For delayed inode facility, qgroup metadata is reserved for it, and
later freed.

However we're freeing more bytes than we reserved.
In btrfs_delayed_inode_reserve_metadata():

num_bytes = btrfs_calc_metadata_size(fs_info, 1);
...
ret = btrfs_qgroup_reserve_meta_prealloc(root,
fs_info->nodesize, true);
...
if (!ret) {
node->bytes_reserved = num_bytes;

But in btrfs_delayed_inode_release_metadata():

if (qgroup_free)
btrfs_qgroup_free_meta_prealloc(node->root,
node->bytes_reserved);
else
btrfs_qgroup_convert_reserved_meta(node->root,
node->bytes_reserved);

This means, we're always releasing more qgroup metadata rsv than we have
reserved.

This won't trigger selftest warning, as btrfs qgroup metadata rsv has
extra protection against cases like quota enabled half-way.

But we still need to fix this problem any way.

This patch will use the same num_bytes for qgroup metadata rsv so we
could handle it correctly.

Fixes: f218ea6c4792 ("btrfs: delayed-inode: Remove wrong qgroup meta reservation calls")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: do not hold device_list_mutex when closing devices

The following lockdep splat

======================================================
WARNING: possible circular locking dependency detected
5.8.0-rc7-00169-g87212851a027-dirty #929 Not tainted
------------------------------------------------------
fsstress/8739 is trying to acquire lock:
ffff88bfd0eb0c90 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x43/0x70

but task is already holding lock:
ffff88bfbd16e538 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x6a/0x4a0

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #10 (sb_pagefaults){.+.+}-{0:0}:
       __sb_start_write+0x129/0x210
       btrfs_page_mkwrite+0x6a/0x4a0
       do_page_mkwrite+0x4d/0xc0
       handle_mm_fault+0x103c/0x1730
       exc_page_fault+0x340/0x660
       asm_exc_page_fault+0x1e/0x30

-> #9 (&mm->mmap_lock#2){++++}-{3:3}:
       __might_fault+0x68/0x90
       _copy_to_user+0x1e/0x80
       perf_read+0x141/0x2c0
       vfs_read+0xad/0x1b0
       ksys_read+0x5f/0xe0
       do_syscall_64+0x50/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #8 (&cpuctx_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       perf_event_init_cpu+0x88/0x150
       perf_event_init+0x1db/0x20b
       start_kernel+0x3ae/0x53c
       secondary_startup_64+0xa4/0xb0

-> #7 (pmus_lock){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       perf_event_init_cpu+0x4f/0x150
       cpuhp_invoke_callback+0xb1/0x900
       _cpu_up.constprop.26+0x9f/0x130
       cpu_up+0x7b/0xc0
       bringup_nonboot_cpus+0x4f/0x60
       smp_init+0x26/0x71
       kernel_init_freeable+0x110/0x258
       kernel_init+0xa/0x103
       ret_from_fork+0x1f/0x30

-> #6 (cpu_hotplug_lock){++++}-{0:0}:
       cpus_read_lock+0x39/0xb0
       kmem_cache_create_usercopy+0x28/0x230
       kmem_cache_create+0x12/0x20
       bioset_init+0x15e/0x2b0
       init_bio+0xa3/0xaa
       do_one_initcall+0x5a/0x2e0
       kernel_init_freeable+0x1f4/0x258
       kernel_init+0xa/0x103
       ret_from_fork+0x1f/0x30

-> #5 (bio_slab_lock){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       bioset_init+0xbc/0x2b0
       __blk_alloc_queue+0x6f/0x2d0
       blk_mq_init_queue_data+0x1b/0x70
       loop_add+0x110/0x290 [loop]
       fq_codel_tcf_block+0x12/0x20 [sch_fq_codel]
       do_one_initcall+0x5a/0x2e0
       do_init_module+0x5a/0x220
       load_module+0x2459/0x26e0
       __do_sys_finit_module+0xba/0xe0
       do_syscall_64+0x50/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #4 (loop_ctl_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       lo_open+0x18/0x50 [loop]
       __blkdev_get+0xec/0x570
       blkdev_get+0xe8/0x150
       do_dentry_open+0x167/0x410
       path_openat+0x7c9/0xa80
       do_filp_open+0x93/0x100
       do_sys_openat2+0x22a/0x2e0
       do_sys_open+0x4b/0x80
       do_syscall_64+0x50/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #3 (&bdev->bd_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       blkdev_put+0x1d/0x120
       close_fs_devices.part.31+0x84/0x130
       btrfs_close_devices+0x44/0xb0
       close_ctree+0x296/0x2b2
       generic_shutdown_super+0x69/0x100
       kill_anon_super+0xe/0x30
       btrfs_kill_super+0x12/0x20
       deactivate_locked_super+0x29/0x60
       cleanup_mnt+0xb8/0x140
       task_work_run+0x6d/0xb0
       __prepare_exit_to_usermode+0x1cc/0x1e0
       do_syscall_64+0x5c/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       btrfs_run_dev_stats+0x49/0x480
       commit_cowonly_roots+0xb5/0x2a0
       btrfs_commit_transaction+0x516/0xa60
       sync_filesystem+0x6b/0x90
       generic_shutdown_super+0x22/0x100
       kill_anon_super+0xe/0x30
       btrfs_kill_super+0x12/0x20
       deactivate_locked_super+0x29/0x60
       cleanup_mnt+0xb8/0x140
       task_work_run+0x6d/0xb0
       __prepare_exit_to_usermode+0x1cc/0x1e0
       do_syscall_64+0x5c/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9f/0x930
       btrfs_commit_transaction+0x4bb/0xa60
       sync_filesystem+0x6b/0x90
       generic_shutdown_super+0x22/0x100
       kill_anon_super+0xe/0x30
       btrfs_kill_super+0x12/0x20
       deactivate_locked_super+0x29/0x60
       cleanup_mnt+0xb8/0x140
       task_work_run+0x6d/0xb0
       __prepare_exit_to_usermode+0x1cc/0x1e0
       do_syscall_64+0x5c/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

-> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}:
       __lock_acquire+0x1272/0x2310
       lock_acquire+0x9e/0x360
       __mutex_lock+0x9f/0x930
       btrfs_record_root_in_trans+0x43/0x70
       start_transaction+0xd1/0x5d0
       btrfs_dirty_inode+0x42/0xd0
       file_update_time+0xc8/0x110
       btrfs_page_mkwrite+0x10c/0x4a0
       do_page_mkwrite+0x4d/0xc0
       handle_mm_fault+0x103c/0x1730
       exc_page_fault+0x340/0x660
       asm_exc_page_fault+0x1e/0x30

other info that might help us debug this:

Chain exists of:
  &fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults

Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(sb_pagefaults);
                               lock(&mm->mmap_lock#2);
                               lock(sb_pagefaults);
  lock(&fs_info->reloc_mutex);

*** DEADLOCK ***

3 locks held by fsstress/8739:
#0: ffff88bee66eeb68 (&mm->mmap_lock#2){++++}-{3:3}, at: exc_page_fault+0x173/0x660
#1: ffff88bfbd16e538 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x6a/0x4a0
#2: ffff88bfbd16e630 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3da/0x5d0

stack backtrace:
CPU: 17 PID: 8739 Comm: fsstress Kdump: loaded Not tainted 5.8.0-rc7-00169-g87212851a027-dirty #929
Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018
Call Trace:
dump_stack+0x78/0xa0
check_noncircular+0x165/0x180
__lock_acquire+0x1272/0x2310
? btrfs_get_alloc_profile+0x150/0x210
lock_acquire+0x9e/0x360
? btrfs_record_root_in_trans+0x43/0x70
__mutex_lock+0x9f/0x930
? btrfs_record_root_in_trans+0x43/0x70
? lock_acquire+0x9e/0x360
? join_transaction+0x5d/0x450
? find_held_lock+0x2d/0x90
? btrfs_record_root_in_trans+0x43/0x70
? join_transaction+0x3d5/0x450
? btrfs_record_root_in_trans+0x43/0x70
btrfs_record_root_in_trans+0x43/0x70
start_transaction+0xd1/0x5d0
btrfs_dirty_inode+0x42/0xd0
file_update_time+0xc8/0x110
btrfs_page_mkwrite+0x10c/0x4a0
? handle_mm_fault+0x5e/0x1730
do_page_mkwrite+0x4d/0xc0
? __do_fault+0x32/0x150
handle_mm_fault+0x103c/0x1730
exc_page_fault+0x340/0x660
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7faa6c9969c4

Was seen in testing.  The fix is similar to that of

  btrfs: open device without device_list_mutex

where we're holding the device_list_mutex and then grab the bd_mutex,
which pulls in a bunch of dependencies under the bd_mutex.  We only ever
call btrfs_close_devices() on mount failure or unmount, so we're save to
not have the device_list_mutex here.  We're already holding the
uuid_mutex which keeps us safe from any external modification of the
fs_devices.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locks

When closing and freeing the source device we could end up doing our
final blkdev_put() on the bdev, which will grab the bd_mutex. As such
we want to be holding as few locks as possible, so move this call
outside of the dev_replace->lock_finishing_cancel_unmount lock. Since
we're modifying the fs_devices we need to make sure we're holding the
uuid_mutex here, so take that as well.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: remove alloc_list splice in btrfs_prepare_sprout

btrfs_prepare_sprout is called when the first rw device is added to a
seed filesystem. This means the filesystem can't have its alloc_list
be non-empty, since seed filesystems are read only. Simply remove the
code altogether.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: document some invariants of seed code

Without good understanding of how seed devices works it's hard to grok
some of what the code in open_seed_devices or btrfs_prepare_sprout does.

Add comments hopefully reducing some of the cognitive load.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: switch seed device to list api

While this patch touches a bunch of files the conversion is
straighforward. Instead of using the implicit linked list anchored at
btrfs_fs_devices::seed the code is switched to using
list_for_each_entry.

Previous patches in the series already factored out code that processed
both main and seed devices so in those cases the factored out functions
are called on the main fs_devices and then on every seed dev inside
list_for_each_entry.

Using list api also allows to simplify deletion from the seed dev list
performed in btrfs_rm_device and btrfs_rm_dev_replace_free_srcdev by
substituting a while() loop with a simple list_del_init.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: simplify setting/clearing fs_info to btrfs_fs_devices

It makes no sense to have sysfs-related routines be responsible for
properly initialising the fs_info pointer of struct btrfs_fs_device.
Instead this can be streamlined by making it the responsibility of
btrfs_init_devices_late to initialize it. That function already
initializes fs_info of every individual device in btrfs_fs_devices.

As far as clearing it is concerned it makes sense to move it to
close_fs_devices. That function is only called when struct
btrfs_fs_devices is no longer in use - either for holding seeds or
main devices for a mounted filesystem.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: make close_fs_devices return void

The return value of this function conveys absolutely no information.
All callers already check the state of fs_devices->opened to decide how
to proceed. So convert the function to returning void. While at it make
btrfs_close_devices also return void.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: factor out loop logic from btrfs_free_extra_devids

This prepares the code to switching seeds devices to a proper list.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs: factor out reada loop in __reada_start_machine

This is in preparation for moving fs_devices to proper lists.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>