arm64: dts: qcom: sdm845: Use the correct BWMON compatible

Drop the incorrect msm8998 fallback and use the new qcom,sdm845-cpu-bwmon
compatible to distinguish the CPU BWMON found on this platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-6-77a050c2fbda@linaro.org

arm64: dts: qcom: sc8280xp: Use the correct BWMON fallback compatible

Use the correct fallback compatible for the BWMONv4 with merged global and
monitor register spaces.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-5-77a050c2fbda@linaro.org

arm64: dts: qcom: sc7280: Use the correct BWMON fallback compatible

Use the correct fallback compatible for the BWMONv4 with merged global and
monitor register spaces.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-4-77a050c2fbda@linaro.org

arm64: dts: qcom: sm6115: Add GPUCC and Adreno SMMU

Add GPUCC and Adreno SMMU nodes in preparation for adding the GPU
itself.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kamorta_adrsmmu-v1-2-d1c0dea90bd9@linaro.org

Merge branch '20230208091340.124641-1-konrad.dybcio@linaro.org' into HEAD

Introduce SM6115 GPUCC devicetree bindings, to make it possible to use
clock defines in the devicetree source.

arm64: dts: qcom: msm8998-yoshino: Use actual pin names for pin nodes

With the gpio-line-names in place coming from SONY themselves, we can
now make the pin nodes and their labels to more closely resemble the
actual thing. 4k has been renamed to four_k due to dtc limitations.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314-topic-yoshino_gpio-v2-2-4cb80e187e38@linaro.org

arm64: dts: qcom: msm8998-yoshino: Use SONY GPIO names

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the Yoshino devices DTs to better document the hardware.

Lilac and Poplar have identical pin assignments.
Diff between these two and maple:

TLMM:
-  "NC",
+  "TS_VDDIO_EN",

PMI8998:
-  "NC"
+  "USB_SWITCH_SEL"

-  "NC"
+  "4K_DISP_DCDC_EN"

PM8005:
-  "NC"
+  "EAR_EN"

Which is probably due to Maple being designed and released quite a bit
earlier than the other two and it having a super high tech true-4K
display.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314-topic-yoshino_gpio-v2-1-4cb80e187e38@linaro.org

arm64: dts: qcom: sdm845-xiaomi-beryllium: add notification LED

The Poco F1 has a single color white notification LED. Enable the
Qualcomm Light Pulse Generator (LPG) driver based notification LED.

Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313154226.136726-1-joelselvaraj.oss@gmail.com

arm64: dts: qcom: qdu1000: Add LLCC/system-cache-controller

Add a DT node for Last level cache (aka. system cache) controller
which provides control over the last level cache present on QDU1000
and QRU1000 SoCs.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313125731.17745-1-quic_kbajaj@quicinc.com

arm64: dts: qcom: apq8096-db820c: drop unit address from PMI8994 regulator

The PMIC regulators are not supposed to have unit addresses.

Fixes: 2317b87a2a6f ("arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-8-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8994-msft-lumia-octagon: drop unit address from PMI8994 regulator

The PMIC regulators are not supposed to have unit addresses.

Fixes: 60b214effb80 ("arm64: dts: qcom: msm8994-octagon: Configure regulators")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-7-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8994-kitakami: drop unit address from PMI8994 regulator

The PMIC regulators are not supposed to have unit addresses.

Fixes: e9783584c9b7 ("arm64: dts: qcom: msm8994-kitakami: Add VDD_GFX regulator")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-6-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8998-oneplus-cheeseburger: revert "fix backlight pin function"

This reverts commit 46546f28825cf3a5ef6873b9cf947cd85c8a7258 because it
mistakenly took PMIC pinctrl/GPIO as TLMM.  The TLMM pinctrl uses "gpio"
function, but PMIC uses "normal", so original code was correct:

  msm8998-oneplus-cheeseburger.dtb: pmic@2: gpio@c000:button-backlight-state: 'oneOf' conditional failed, one must be fixed:
    'gpio' is not one of ['normal', 'paired', 'func1', 'func2', 'dtest1', 'dtest2', 'dtest3', 'dtest4', 'func3', 'func4']

Fixes: 46546f28825c ("arm64: dts: qcom: msm8998-oneplus-cheeseburger: fix backlight pin function")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-5-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc7180-trogdor-pazquel: correct trackpad supply

The hid-over-i2c takes VDD, not VCC supply.  Fix copy-pasta from other
boards which use elan,ekth3000 with valid VCC:

  sc7180-trogdor-pazquel360-lte.dtb: trackpad@15: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: fb69f6adaf88 ("arm64: dts: qcom: sc7180: Add pazquel dts files")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-4-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc7180-trogdor-lazor: correct trackpad supply

The hid-over-i2c takes VDD, not VCC supply.  Fix copy-pasta from other
boards which use elan,ekth3000 with valid VCC:

  sc7180-trogdor-lazor-limozeen-nots-r4.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: 2c26adb8dbab ("arm64: dts: qcom: Add sc7180-lazor-limozeen skus")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc7280-herobrine-villager: correct trackpad supply

The hid-over-i2c takes VDD, not VCC supply.  Fix copy-pasta from other
Herobrine boards which use elan,ekth3000 with valid VCC:

  sc7280-herobrine-villager-r1-lte.dtb: trackpad@2c: 'vcc-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: ee2a62116015 ("arm64: dts: qcom: sc7280: Add device tree for herobrine villager")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sda660-inforce: correct key node name

gpio-key bindings expect children to be named with generic prefix:

  sda660-inforce-ifc6560.dtb: gpio-keys: 'volup' does not match any of the regexes: ...

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8916-yiming-uz801v3: Add initial device tree

This commit adds support for the uz801 v3.0 WiFi/LTE dongle made by
Henan Yiming Technology Co., Ltd. based on MSM8916.

Note: The original firmware does not support 64-bit OS. It is necessary
to flash 64-bit TZ firmware to boot arm64.

Currently supported:
- All CPU cores
- Buttons
- LEDs
- Modem
- SDHC
- USB Device Mode
- UART

Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/tencent_62395CA0D608DD0078DD3D889F6E4E22BA05@qq.com

arm64: dts: qcom: msm8916: Move WCN compatible to boards

On MSM8916 the wireless connectivity functionality (WiFi/Bluetooth) is
split into the digital part inside the SoC and the analog RF part inside
a supplementary WCN36xx chip. For MSM8916, three different options
exist:

  - WCN3620  (WLAN 802.11 b/g/n 2.4 GHz + Bluetooth)
  - WCN3660B (WLAN 802.11 a/b/g/n 2.4/5 GHz + Bluetooth)
  - WCN3680B (WLAN 802.11ac 2.4/5 GHz + Bluetooth)

Choosing one of these is up to the board vendor. This means that the
compatible belongs into the board-specific DT part so people porting
new boards pay attention to set the correct compatible.

Right now msm8916.dtsi sets "qcom,wcn3620" as default compatible,
which does not work at all for boards that have WCN3660B or WCN3680B.

Remove the default compatible from msm8196.dtsi and move it to the board
DT as follows:

  - Boards with only &pronto { status = "okay"; } used the default
    "qcom,wcn3620" so far. They now set this explicitly for &wcnss_iris.
  - Boards with &pronto { ... iris { compatible = "qcom,wcn3660b"; }};
    already had an override that just moves to &wcnss_iris now.
  - For msm8916-samsung-a2015-common.dtsi the WCN compatible differs for
    boards making use of it (a3u: wcn3620, a5u: wcn3660b, e2015: wcn3620)
    so the definitions move to the board-specific DT part.

Since this requires touching all the board DTs, use this as a chance to
name the WCNSS-related labels consistently, so everything is grouped
properly when sorted alphabetically.

No functional change, just clean-up for more clarity & easier porting.
Aside from ordering the generated DTBs are identical.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309091452.1011776-1-stephan.gerhold@kernkonzept.com

Merge branch 'arm64-fixes-for-6.3' into arm64-for-6.4

Merge the arm64-fixes-for-6.3 branch to avoid merge conflicts with
changes for v6.4.

arm64: dts: qcom: sdm845-xiaomi-beryllium: correct compatible

Tianma FHD panel is supposed to be used with fallback compatible:

  sdm845-xiaomi-beryllium-tianma.dtb: panel@0: compatible: ['tianma,fhd-video'] is too short

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-11-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm845-xiaomi-beryllium: drop invalid panel properties

Panel does not have children with unit-addresses thus address/size-cells
are not valid:

  sdm845-xiaomi-beryllium-tianma.dtb: panel@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-10-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm845-oneplus: drop invalid panel properties

Panel does not have children with unit-addresses thus address/size-cells
are not valid:

  panel@0: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-9-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc7180-trogdor-lazor: correct panel compatible

innolux,n116bca-ea1 is not exactly compatible witg innolux,n116bge, as
they have their own driver data.  Bindings do not allow fallback:

  sc7180-trogdor-lazor-limozeen-nots-r4.dtb: panel: compatible: ['innolux,n116bca-ea1', 'innolux,n116bge'] is too long

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-8-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc7180-qcard: use just "port" in panel

The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sc7280-herobrine-zombie-nvme-lte.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-7-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc7180-trogdor-wormdingler: use just "port" in panel

The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sc7180-trogdor-wormdingler-rev1-boe.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-6-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc7180-trogdor-quackingstick: use just "port" in panel

The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sc7180-trogdor-quackingstick-r0.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-5-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc7180-idp: use just "port" in panel

The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sc7180-idp.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
  sc7180-idp.dtb: panel@0: 'port' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-4-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc8280xp-crd: use just "port" in panel

The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sc8280xp-crd.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc8280xp-lenovo-thinkpad-x13s: use just "port" in panel

The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sc8280xp-lenovo-thinkpad-x13s.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm845-cheza: use just "port" in Innolux panel

The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sdm845-cheza-r2.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326155753.92007-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers

The pmk8280 PMIC PON peripheral is gen3 and uses two sets of registers;
hlos and pbs.

This specifically fixes the following error message during boot when the
pbs registers are not defined:

PON_PBS address missing, can't read HW debounce time

Note that this also enables the spurious interrupt workaround introduced
by commit 0b65118e6ba3 ("Input: pm8941-pwrkey - add software key press
debouncing support") (which may or may not be needed).

Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327122948.4323-1-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp-x13s: drop bogus 'input-enable'

The sc8280xp pin controller does not have a way to enable or disable the
input buffer so drop the unnecessary 'input-enable' property which is
about to be deprecated.

Link: https://lore.kernel.org/lkml/20230323102605.6.I291ce0ba2c6ea80b341659c4f75a567a76dd7ca6@changeid
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327123243.4527-1-johan+linaro@kernel.org

Merge branch '20230307062232.4889-1-quic_kathirav@quicinc.com' into arm64-for-6.4

Merge in the topic branch with IPQ5332 GCC DT-binding, to ensure that
the header file with GCC clock defines are available.

arm64: dts: qcom: sdm630: move DSI opp-table into DSI node

The soc node is supposed to have only device nodes with MMIO addresses,
so move the DSI OPP into the DSI controller node to fix:

  sda660-inforce-ifc6560.dtb: soc: opp-table-dsi: {'compatible': ['operating-points-v2'], ... should not be valid under {'type': 'object'}
    From schema: dtschema/schemas/simple-bus.yaml

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324202244.744271-5-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8996-xiaomi: drop simple-bus from clocks

'clocks' node is not a bus, but just a placeholder for clocks:

  msm8996-xiaomi-gemini.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
    From schema: dtschema/schemas/simple-bus.yaml
  msm8996-xiaomi-gemini.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ...
    From schema: dtschema/schemas/simple-bus.yaml

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324202244.744271-4-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: msm8994-msft-lumia: drop simple-bus from clocks

'clocks' node is not a bus, but just a placeholder for clocks:

  msm8992-msft-lumia-octagon-talkman.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
    From schema: dtschema/schemas/simple-bus.yaml
  msm8992-msft-lumia-octagon-talkman.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], ...
    From schema: dtschema/schemas/simple-bus.yaml

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324202244.744271-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: apq8096-db820c: drop simple-bus from clocks

'clocks' node is not a bus, but just a placeholder for clocks:

  apq8096-db820c.dtb: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
    From schema: dtschema/schemas/simple-bus.yaml
  apq8096-db820c.dtb: clocks: xo-board: {'compatible': ['fixed-clock'], '#clock-cells': [[0]],  ...
    From schema: dtschema/schemas/simple-bus.yaml

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324202244.744271-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8450: fix pcie1 gpios properties name

Add the final "s" to the pgio properties and fix the invalid "enable"
name to the correct "wake", checked against the HDK8450 schematics.

Fixes: bc6588bc25fb ("arm64: dts: qcom: sm8450: add PCIe1 root device")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-4-0ca1bea1a843@linaro.org

arm64: dts: qcom: sm8450: remove invalid power-domain-names in pcie nodes

Fixes the following DT bindings check error:
pci@1c00000: Unevaluated properties are not allowed ('power-domain-names' were unexpected)

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-3-0ca1bea1a843@linaro.org

arm64: dts: qcom: ipq8074-hk10: enable QMP device, not the PHY node

Correct PCIe PHY enablement to refer the QMP device nodes rather than
PHY device nodes. QMP nodes have 'status = "disabled"' property in the
ipq8074.dtsi, while PHY nodes do not correspond to the actual device and
do not have the status property.

Fixes: 1ed34da63a37 ("arm64: dts: qcom: Add board support for HK10")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324021651.1799969-2-dmitry.baryshkov@linaro.org

arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node

Correct PCIe PHY enablement to refer the QMP device nodes rather than
PHY device nodes. QMP nodes have 'status = "disabled"' property in the
ipq8074.dtsi, while PHY nodes do not correspond to the actual device and
do not have the status property.

Fixes: e8a7fdc505bb ("arm64: dts: ipq8074: qcom: Re-arrange dts nodes based on address")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324021651.1799969-1-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sc8280xp-x13s: enable alternate touchpad

Enable both touchpad nodes in the devictree and let the HID driver
determine which one is actually populated (by attempting to read from
each i2c address).

Ideally this would not be needed and the boot firmware should instead
enable only the node for the populated touchpad, but this is unlikely to
ever be realised for the X13s.

Note that the pin configuration must currently be moved to the parent
i2c-bus node even though only one of these nodes will ever be
successfully probed on a specific device (e.g. to allow them to be
probed in parallel).

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324094744.20448-1-johan+linaro@kernel.org

arm64: dts: qcom: qrb5165-rb5: Use proper WSA881x shutdown GPIO polarity

The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high.  Since Linux drivers were updated to
handle proper flag, correct the DTS.

The change is not backwards compatible with older Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-5-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8250-mtp: Use proper WSA881x shutdown GPIO polarity

The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high.  Since Linux drivers were updated to
handle proper flag, correct the DTS.

The change is not backwards compatible with older Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-4-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm850-samsung-w737: Use proper WSA881x shutdown GPIO polarity

The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high.  Since Linux drivers were updated to
handle proper flag, correct the DTS.

The change is not backwards compatible with older Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm850-lenovo-yoga-c630: Use proper WSA881x shutdown GPIO polarity

The WSA881x shutdown GPIO is active low (SD_N), but Linux driver assumed
DTS always comes with active high.  Since Linux drivers were updated to
handle proper flag, correct the DTS.

The change is not backwards compatible with older Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322193051.826167-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc8280xp-pmics: fix sdam 'reg' property

The SPMI PMIC register region width is fixed and should not be encoded
in the devicetree.

Fixes: d6dbbda37ab5 ("arm64: dts: qcom: sc8280xp-pmics: add pmk8280 sdam nvram")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230320135710.1989-3-johan+linaro@kernel.org

arm64: dts: qcom: sm8450: add dp controller

Add the Display Port controller subnode to the MDSS node.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-5-d78313cbc41d@linaro.org

arm64: dts: qcom: sm8450: switch to usb3/dp combo phy

The QMP PHY is a USB3/DP combo phy, switch to the newly
documented bindings and register the clocks to the GCC
and DISPCC controllers.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-4-d78313cbc41d@linaro.org

arm64: dts: qcom: sm8350: add dp controller

Add the Display Port controller subnode to the MDSS node.

Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #SM8350-HDK
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-3-d78313cbc41d@linaro.org

arm64: dts: qcom: sm8350: switch to combo usb3/dp phy

The first QMP PHY is an USB3/DP combo phy, switch to the newly
documented bindings and register the clocks to the GCC
and DISPCC controllers.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #SM8350-HDK
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206-topic-sm8450-upstream-dp-controller-v6-2-d78313cbc41d@linaro.org

arm64: dts: qcom: sc7280: align RPMh regulator nodes with bindings

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217155838.848403-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc7280-herobrine-audio-rt5682: add missing supplies

Bindings expect DBVDD-supply and LDO1-IN-supply:

  sc7280-herobrine-evoker-lte.dtb: codec@1a: 'DBVDD-supply' is a required property
  sc7280-herobrine-evoker-lte.dtb: codec@1a: 'LDO1-IN-supply' is a required property

In sc7180-trogdor.dtsi they come from the same regulator, so let's
assume intention was the same here.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217155838.848403-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sc7180-trogdor-pazquel360: drop incorrect RT5682S VBAT-supply

It seems that the RT5682S codec does not use VBAT-supply:

  sc7180-trogdor-pazquel360-lte.dtb: codec@1a: Unevaluated properties are not allowed ('VBAT-supply' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217155838.848403-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: ipq5332: enable the CPUFreq support

Add the APCS, A53 PLL, cpu-opp-table nodes to bump the CPU frequency
above 800MHz.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217083308.12017-6-quic_kathirav@quicinc.com

arm64: dts: qcom: sc8280xp-x13s: add wifi calibration variant

Describe the bus topology for PCIe domain 6 and add the ath11k
calibration variant so that the board file (calibration data) can be
loaded.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216246
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230321094011.9759-3-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp-x13s: add hid 1.8V supplies

All the input devices use s10b as 1.8V supply.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-7-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp-x13s: add pmic regulator supplies

The s11b, s12b, s1c and bob supplies are used by several pmic
regulators. Add the missing description to the devicetree.

Note that there are still some consumers that are not (fully) described
in the devicetree so the supplies must remain marked as always-on for
now.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-6-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on

The bob supply is used by several pmic regulators and components which
are not (yet fully) described in the devicetree.

Mark the regulator as always-on for now.

Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-5-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on

The s12b supply is used by several pmic regulators as well as the
wlan/bluetooth radio which are not yet fully described in the
devicetree.

Mark the regulator as always-on for now.

Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-4-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on

The s10b supply is used by several components that are not (yet)
described in devicetree (e.g. ram, charger, ec) and must not be
disabled.

Mark the regulator as always-on.

Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-3-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on

The s11b supply is used by the wlan module (as well as some of the
pmics) which are not yet fully described in the devicetree.

Mark the regulator as always-on for now.

Fixes: 123b30a75623 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller")
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-2-johan+linaro@kernel.org

arm64: dts: qcom: sm8450-hdk: align WCD9385 reset pin with downstream config

Downstream DTS uses 16 mA drive strength for the WCD9385 audio codec
RESET_N reset pin.  It also pulls the pin down in shutdown mode, thus it
is more like a shutdown pin, not a reset.  Use the same settings here
for HDK8450 and keep the WCD9385 by default in powered off (so pin as
low).  Align the name of pin configuration node with other pins in the
DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308183317.559253-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8450-hdk: use precise WCD9385 compatible

The HDK8450 uses WCD9385 audio codec, so use precise compatible, even
though WCD9380 and WCD9385 are both compatible.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308183317.559253-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8450-hdk: use recommended drive strength for speaker SD_N

Downstream DTS (and sc8280xp-lenovo-thinkpad-x13s with the same
speakers) uses 16 mA drive strength for the WSA8835 speaker SD_N
reset/shutdown pin.  Use the same for HDK8450, as it is seem the
recommended value.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308142712.277659-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8150: Add SoC-specific compatible to cpufreq_hw

Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-8-3368473ec52d@linaro.org

arm64: dts: qcom: sm6350: Add SoC-specific compatible to cpufreq_hw

Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-7-3368473ec52d@linaro.org

arm64: dts: qcom: sm6115: Add SoC-specific compatible to cpufreq_hw

Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-6-3368473ec52d@linaro.org

arm64: dts: qcom: sdm845: Add SoC-specific compatible to cpufreq_hw

Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-5-3368473ec52d@linaro.org

arm64: dts: qcom: sc7180: Add SoC-specific compatible to cpufreq_hw

Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-4-3368473ec52d@linaro.org

arm64: dts: qcom: sdm845-oneplus-common: add Hall sensor

Enable the Hall effect sensor (flip cover) for OnePlus 6/6T.
The GPIO is mapped to SW_LID events as in msm8916, msm8994,
msm8998 devices.

Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306174147.185239-1-soyer@irl.hu

arm64: dts: qcom: drop redundant line breaks

Remove trailing, redundant line breaks.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306081430.28491-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sdm845-db845c: drop empty node override

Drop empty override of pm8998_gpios.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306081430.28491-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: pm660: align thermal node names with bindings

Bindings expect thermal node names to end with '-thermal', so fix pm660
and pm660l:

  sda660-inforce-ifc6560.dtb: thermal-zones: 'pm660', 'pm660l' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230305154308.241651-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8350-microsoft-surface: fix USB dual-role mode property

The "dr_mode" is a property of USB DWC3 node, not the Qualcomm wrapper
one:
  sm8350-microsoft-surface-duo2.dtb: usb@a6f8800: 'dr_mode' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+'

Fixes: c16160cfa565 ("arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304130315.51595-2-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sm8250-xiaomi-elish: fix USB maximum speed property

Fix typo in USB DWC3 node maximum speed property.

Fixes: a41b617530bf ("arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304130315.51595-1-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: sa8775p-ride: enable the BT UART port

Enable the high-speed UART port connected to the Bluetooth controller on
the sa8775p-adp development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-10-brgl@bgdev.pl

arm64: dts: qcom: sa8775p-ride: enable the GNSS UART port

Enable the high-speed UART port connected to the GNSS controller on the
sa8775p-adp development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-9-brgl@bgdev.pl

arm64: dts: qcom: sa8775p: add high-speed UART nodes

Add two UART nodes that are known to be used by existing development
boards with this SoC.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-8-brgl@bgdev.pl

arm64: dts: qcom: sa8775p-ride: enable the SPI node

Enable the SPI interface exposed on the sa8775p-ride development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-7-brgl@bgdev.pl

arm64: dts: qcom: sa8775p: add the spi16 node

Add the SPI controller node for the interface exposed on the sa8775p-ride
development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-6-brgl@bgdev.pl

arm64: dts: qcom: sa8775p-ride: enable i2c18

This enables the I2C interface on the sa8775p-ride development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-5-brgl@bgdev.pl

arm64: dts: qcom: sa8775p: add the i2c18 node

Add a disabled node for the I2C interface that's exposed on the
sa8775p-ride development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-4-brgl@bgdev.pl

arm64: dts: qcom: sa8775p-ride: enable QUPv3 #2

Enable the second instance of the QUPv3 engine on the sa8775p-ride board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-3-brgl@bgdev.pl

arm64: dts: qcom: sa8775p: add the QUPv3 #2 node

Add the second instance of the QUPv3 engine to the sa8775p.dtsi.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309103752.173541-2-brgl@bgdev.pl

arm64: dts: qcom: pm8150l: add spmi-flash-led node

Add a node describing the flash block found on pm8150l.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230321182319.24958-1-danila@jiaxyga.com

arm64: dts: qcom: sdm845: Fix the BAM DMA engine compatible string

As per documentation, Qualcomm SDM845 SoC supports BAM DMA
engine v1.7.4, so use the correct compatible strings.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230321190118.3327360-2-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm8550-mtp: add pmic glink node

Add the pmic glink node linked with the DWC3 USB controller
switched to OTG mode and tagged with usb-role-switch.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-11-552f3b721f9e@linaro.org

arm64: dts: qcom: sm8450-hdk: add pmic glink node

Add the pmic glink node linked with the DWC3 USB controller
switched to OTG mode and tagged with usb-role-switch.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-10-552f3b721f9e@linaro.org

arm64: dts: qcom: sm8350-hdk: add pmic glink node

Add the pmic glink node linked with the DWC3 USB controller
switched to OTG mode and tagged with usb-role-switch.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-9-552f3b721f9e@linaro.org

arm64: dts: qcom: sm8550: add port subnodes in dwc3 node

Add ports subnodes in dwc3 node to avoid repeating the
same description in each board DT.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-8-552f3b721f9e@linaro.org

arm64: dts: qcom: sm8450: add port subnodes in dwc3 node

Add ports subnodes in dwc3 node to avoid repeating the
same description in each board DT.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-7-552f3b721f9e@linaro.org

arm64: dts: qcom: sm8350: add port subnodes in dwc3 node

Add ports subnodes in dwc3 node to avoid repeating the
same description in each board DT.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-6-552f3b721f9e@linaro.org

arm64: dts: qcom: sm6115: Move SDHC node(s)'s 'pinctrl' properties to dts

Normally the 'pinctrl' properties of a SDHC controller and the
chip detect pin settings are dependent on the type of the slots
(for e.g uSD card slot), regulators and GPIO(s) available on the
board(s).

So, move the same from the sm6115 dtsi file to the respective
board file(s).

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314074001.1873781-1-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm6115: Move USB node's 'maximum-speed' and 'dr_mode' properties to dts

Normally the 'maximum-speed' and 'dr_mode' properties
of a USB controller + port is dependent on the type of
the ports, regulators and mode change interrupt routing
available on the board(s).

So, move the same from the sm6115 dtsi file to respective
board file(s).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314083633.1882214-3-bhupesh.sharma@linaro.org

arm64: dts: qcom: sm6115: Cleanup USB node's label

There is only one USB controller present on SM6115 / SM4250
Qualcomm SoC, so drop the numbering used with USB node's label
names in the dtsi and the related sm4250-oneplus-billie2.dts.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314083633.1882214-2-bhupesh.sharma@linaro.org

arm64: dts: qcom: sc8280xp: fix external display power domain

Fix the external display controller nodes which erroneously described
the controllers as belonging to CX rather than MMCX.

Fixes: 19d3bb90754f ("arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230316141252.2436-1-johan+linaro@kernel.org

arm64: dts: qcom: msm8916: Fix tsens_mode unit address

The reg address of the tsens_mode nvmem cell is correct but the unit
address does not match (0xec vs 0xef). Fix it. No functional change.

Fixes: 24aafd041fb2 ("arm64: dts: qcom: msm8916: specify per-sensor calibration cells")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308123617.101211-1-stephan.gerhold@kernkonzept.com

arm64: dts: qcom: sm8550: misc style fixes

Miscellaneous DT fixes to remove spurious blank line and enhance readability.

Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Fixes: d7da51db5b81 ("arm64: dts: qcom: sm8550: add display hardware devices")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-topic-sm8550-upstream-dt-fixups-v1-3-595b02067672@linaro.org