platform/kernel/linux-rpi.git
5 years agoselftests: forwarding: Add a test for VLAN deletion
Ido Schimmel [Tue, 8 Jan 2019 16:48:14 +0000 (16:48 +0000)]
selftests: forwarding: Add a test for VLAN deletion

[ Upstream commit 4fabf3bf93a194c7fa5288da3e0af37e4b943cf3 ]

Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is
not affected.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomlxsw: spectrum_acl: Add cleanup after C-TCAM update error condition
Nir Dotan [Tue, 8 Jan 2019 16:48:03 +0000 (16:48 +0000)]
mlxsw: spectrum_acl: Add cleanup after C-TCAM update error condition

[ Upstream commit ff0db43cd6c530ff944773ccf48ece55d32d0c22 ]

When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert().
In case of C-TCAM HW insertion error, the opposite action should take
place.
Add error handling case in which the C-TCAM region entry is removed, by
calling cregion->ops->entry_remove().

Fixes: a0a777b9409f ("mlxsw: spectrum_acl: Start using A-TCAM")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoxprtrdma: Double free in rpcrdma_sendctxs_create()
Dan Carpenter [Sat, 5 Jan 2019 13:06:48 +0000 (16:06 +0300)]
xprtrdma: Double free in rpcrdma_sendctxs_create()

[ Upstream commit 6e17f58c486d9554341f70aa5b63b8fbed07b3fa ]

The clean up is handled by the caller, rpcrdma_buffer_create(), so this
call to rpcrdma_sendctxs_destroy() leads to a double free.

Fixes: ae72950abf99 ("xprtrdma: Add data structure to manage RDMA Send arguments")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoMIPS: ath79: Enable OF serial ports in the default config
Alban Bedel [Mon, 7 Jan 2019 19:45:15 +0000 (20:45 +0100)]
MIPS: ath79: Enable OF serial ports in the default config

[ Upstream commit 565dc8a4f55e491935bfb04866068d21784ea9a4 ]

CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF
boards, enable it in the default config to get a working setup out of
the box.

Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet/mlx4: Get rid of page operation after dma_alloc_coherent
Stephen Warren [Thu, 3 Jan 2019 17:23:23 +0000 (10:23 -0700)]
net/mlx4: Get rid of page operation after dma_alloc_coherent

[ Upstream commit f65e192af35058e5c82da9e90871b472d24912bc ]

This patch solves a crash at the time of mlx4 driver unload or system
shutdown. The crash occurs because dma_alloc_coherent() returns one
value in mlx4_alloc_icm_coherent(), but a different value is passed to
dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because
when allocated, that pointer is passed to sg_set_buf() to record it,
then when freed it is re-calculated by calling
lowmem_page_address(sg_page()) which returns a different value. Solve
this by recording the value that dma_alloc_coherent() returns, and
passing this to dma_free_coherent().

This patch is roughly equivalent to commit 378efe798ecf ("RDMA/hns: Get
rid of page operation after dma_alloc_coherent").

Based-on-code-from: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agowatchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem
NeilBrown [Sun, 30 Dec 2018 03:21:52 +0000 (14:21 +1100)]
watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem

[ Upstream commit 3aa8b8bbc142eeaac89891de584535ceb7fce405 ]

These files need
   #include <linux/mod_devicetable.h>
to compile correctly.

Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoselftests/bpf: Test [::] -> [::1] rewrite in sys_sendmsg in test_sock_addr
Andrey Ignatov [Fri, 4 Jan 2019 09:07:08 +0000 (01:07 -0800)]
selftests/bpf: Test [::] -> [::1] rewrite in sys_sendmsg in test_sock_addr

[ Upstream commit 976b4f3a4646fbf0d189caca25f91f82e4be4b5a ]

Test that sys_sendmsg BPF hook doesn't break sys_sendmsg behaviour to
rewrite destination IPv6 = [::] with [::1] (BSD'ism).

Two test cases are added:

1) User passes dst IPv6 = [::] and BPF_CGROUP_UDP6_SENDMSG program
   doesn't touch it.

2) User passes dst IPv6 != [::], but BPF_CGROUP_UDP6_SENDMSG program
   rewrites it with [::].

In both cases [::1] is used by sys_sendmsg code eventually and datagram
is sent successfully for unconnected UDP socket.

Example of relevant output:
  Test case: sendmsg6: set dst IP = [::] (BSD'ism) .. [PASS]
  Test case: sendmsg6: preserve dst IP = [::] (BSD'ism) .. [PASS]

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agobpf: Fix [::] -> [::1] rewrite in sys_sendmsg
Andrey Ignatov [Fri, 4 Jan 2019 09:07:07 +0000 (01:07 -0800)]
bpf: Fix [::] -> [::1] rewrite in sys_sendmsg

[ Upstream commit e8e36984080b55ac5e57bdb09a5b570f2fc8e963 ]

sys_sendmsg has supported unspecified destination IPv6 (wildcard) for
unconnected UDP sockets since 876c7f41. When [::] is passed by user as
destination, sys_sendmsg rewrites it with [::1] to be consistent with
BSD (see "BSD'ism" comment in the code).

This didn't work when cgroup-bpf was enabled though since the rewrite
[::] -> [::1] happened before passing control to cgroup-bpf block where
fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that
might or might not be changed by BPF program). That way if user passed
[::] as dst IPv6 it was first rewritten with [::1] by original code from
876c7f41, but then rewritten back with [::] by cgroup-bpf block.

It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present
(CONFIG_CGROUP_BPF=y was enough).

The fix is to apply BSD'ism after cgroup-bpf block so that [::] is
replaced with [::1] no matter where it came from: passed by user to
sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program.

Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg")
Reported-by: Nitin Rawat <nitin.rawat@intel.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: hns: Fix use after free identified by SLUB debug
Yonglong Liu [Fri, 4 Jan 2019 12:18:11 +0000 (20:18 +0800)]
net: hns: Fix use after free identified by SLUB debug

[ Upstream commit bb989501abcafa0de5f18b0ec0ec459b5b817908 ]

When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will
identify a use after free bug:

[134.189505] Unable to handle kernel paging request at virtual address
006b6b6b6b6b6b6b
[134.197553] Mem abort info:
[134.200381]   ESR = 0x96000004
[134.203487]   Exception class = DABT (current EL), IL = 32 bits
[134.209497]   SET = 0, FnV = 0
[134.212596]   EA = 0, S1PTW = 0
[134.215777] Data abort info:
[134.218701]   ISV = 0, ISS = 0x00000004
[134.222596]   CM = 0, WnR = 0
[134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges
[134.232851] Internal error: Oops: 96000004 [#1] SMP
[134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G
OE     4.19.5-1.2.34.aarch64 #1
[134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018
[134.255181] pstate: 20000005 (nzCv daif -PAN -UAO)
[134.260044] pc : hns_ae_put_handle+0x38/0x60
[134.264372] lr : hns_ae_put_handle+0x24/0x60
[134.268700] sp : ffff00001be93c50
[134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040
[134.277442] x27: 0000000000000000 x26: 0000000000000000
[134.282830] x25: 0000000056000000 x24: 0000000000000015
[134.288284] x23: ffff0000096fe098 x22: ffff000001050070
[134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098
[134.303287] x19: ffff80afb75ec098 x18: 0000000000000000
[134.312945] x17: 0000000000000000 x16: 0000000000000000
[134.322517] x15: 0000000000000002 x14: 0000000000000000
[134.332030] x13: dead000000000100 x12: ffff7e02bea3c988
[134.341487] x11: ffff80affbee9e68 x10: 0000000000000000
[134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000
[134.360569] x7 : dead000000000100 x6 : ffff000009579748
[134.370059] x5 : 0000000000210d00 x4 : 0000000000000000
[134.379550] x3 : 0000000000000001 x2 : 0000000000000000
[134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000
[134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd)
[134.408498] Call trace:
[134.414611]  hns_ae_put_handle+0x38/0x60
[134.422208]  hnae_put_handle+0xd4/0x108
[134.429563]  hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv]
[134.438342]  platform_drv_remove+0x2c/0x70
[134.445958]  device_release_driver_internal+0x174/0x208
[134.454810]  driver_detach+0x70/0xd8
[134.461913]  bus_remove_driver+0x64/0xe8
[134.469396]  driver_unregister+0x34/0x60
[134.476822]  platform_driver_unregister+0x20/0x30
[134.485130]  hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv]
[134.494634]  __arm64_sys_delete_module+0x238/0x290

struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is
freed, than use hnae_handle will cause use after free panic.

This patch frees vf_cb after hnae_handle used.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoqed: Fix qed_ll2_post_rx_buffer_notify_fw() by adding a write memory barrier
Denis Bolotin [Thu, 3 Jan 2019 10:02:40 +0000 (12:02 +0200)]
qed: Fix qed_ll2_post_rx_buffer_notify_fw() by adding a write memory barrier

[ Upstream commit 46721c3d9e273aea880e9ff835b0e1271e1cd2fb ]

Make sure chain element is updated before ringing the doorbell.

Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoqed: Fix qed_chain_set_prod() for PBL chains with non power of 2 page count
Denis Bolotin [Thu, 3 Jan 2019 10:02:39 +0000 (12:02 +0200)]
qed: Fix qed_chain_set_prod() for PBL chains with non power of 2 page count

[ Upstream commit 2d533a9287f2011632977e87ce2783f4c689c984 ]

In PBL chains with non power of 2 page count, the producer is not at the
beginning of the chain when index is 0 after a wrap. Therefore, after the
producer index wrap around, page index should be calculated more carefully.

Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoxen/pvcalls: remove set but not used variable 'intf'
YueHaibing [Fri, 4 Jan 2019 06:03:40 +0000 (06:03 +0000)]
xen/pvcalls: remove set but not used variable 'intf'

[ Upstream commit 1f8ce09b36c41a026a37a24b20efa32000892a64 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/pvcalls-back.c: In function 'pvcalls_sk_state_change':
drivers/xen/pvcalls-back.c:286:28: warning:
 variable 'intf' set but not used [-Wunused-but-set-variable]

It not used since e6587cdbd732 ("pvcalls-back: set -ENOTCONN in
pvcalls_conn_back_read")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: mc13xxx: Fix a missing check of a register-read failure
Kangjie Lu [Thu, 20 Dec 2018 21:12:11 +0000 (15:12 -0600)]
mfd: mc13xxx: Fix a missing check of a register-read failure

[ Upstream commit 9e28989d41c0eab57ec0bb156617a8757406ff8a ]

When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will
contain random value. Further execution uses "old_adc0" even when
mc13xxx_reg_read() fails.
The fix checks the return value of mc13xxx_reg_read(), and exits
the execution when it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
Keerthy [Sun, 9 Dec 2018 13:59:31 +0000 (19:29 +0530)]
mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()

[ Upstream commit 75d4c5e03c2ae9902ab521024b10291f6fc9515b ]

Use devm_regmap_add_irq_chip and clean up error path in probe
and also the remove function.

Reported-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove
Enric Balletbo i Serra [Mon, 10 Dec 2018 18:00:02 +0000 (19:00 +0100)]
mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove

[ Upstream commit 18e294ddafaeb80a1e2e10c9bd750a6cb8388d5b ]

The driver adds different MFD child devices via mfd_add_devices() and
hence it is required to call mfd_remove_devices() to remove MFD child
devices.

Fixes: 5e0115581bbc ("cros_ec: Move cros_ec_dev module to drivers/mfd")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: axp20x: Add supported cells for AXP803
Oskari Lemmela [Sat, 8 Dec 2018 17:58:47 +0000 (19:58 +0200)]
mfd: axp20x: Add supported cells for AXP803

[ Upstream commit ea90e7b47f0a8bd2fe14e9a88f523de7c67db90a ]

Parts of the AXP803 are compatible with their counterparts on the AXP813.
These include the GPIO, ADC, AC and battery power supplies.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: axp20x: Re-align MFD cell entries
Chen-Yu Tsai [Sat, 8 Dec 2018 17:58:46 +0000 (19:58 +0200)]
mfd: axp20x: Re-align MFD cell entries

[ Upstream commit 753a8d083e085c6f552c7982749de4cc7c40e2ac ]

In the axp20x driver, the various mfd_cell lists had varying amounts
of indentation, sometimes even within the same list. For the axp288,
there's no alignment at all.

Re-align the right hand side of the assignments with the least amount
of tabs possible. Also collapse the closing bracket and the opening
bracket of the next entry onto the same line for the axp288, to be
consistent with all the other mfd_cell lists.

This patch is whitespace change only. No functionality is modified.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: axp20x: Add AC power supply cell for AXP813
Oskari Lemmela [Tue, 20 Nov 2018 17:52:10 +0000 (19:52 +0200)]
mfd: axp20x: Add AC power supply cell for AXP813

[ Upstream commit 4a19f9a65375ca9781b3ca9e810ece92edfc3e78 ]

As axp20x-ac-power-supply now supports AXP813, add a cell for it.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: wm5110: Add missing ASRC rate register
Charles Keepax [Wed, 28 Nov 2018 10:04:22 +0000 (10:04 +0000)]
mfd: wm5110: Add missing ASRC rate register

[ Upstream commit 04c801c18ded421845324255e660147a6f58dcd6 ]

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: qcom_rpm: write fw_version to CTRL_REG
Jonathan Marek [Mon, 19 Nov 2018 19:53:17 +0000 (14:53 -0500)]
mfd: qcom_rpm: write fw_version to CTRL_REG

[ Upstream commit 504e4175829c44328773b96ad9c538e4783a8d22 ]

This is required as part of the initialization sequence on certain SoCs.

If these registers are not initialized, the hardware can be unresponsive.
This fixes the driver on apq8060 (HP TouchPad device).

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: bd9571mwv: Add volatile register to make DVFS work
Dien Pham [Wed, 3 Oct 2018 13:58:41 +0000 (15:58 +0200)]
mfd: bd9571mwv: Add volatile register to make DVFS work

[ Upstream commit b0aff01e7aa6ad2d6998ef1323843212d1db8b04 ]

Because BD9571MWV_DVFS_MONIVDAC is not defined in the volatile table,
the physical register value is not updated by regmap and DVFS doesn't
work as expected. Fix it!

Fixes: d3ea21272094 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver")
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
[wsa: rebase, add 'Fixes', reword commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: ab8500-core: Return zero in get_register_interruptible()
Dan Carpenter [Thu, 25 Oct 2018 12:43:44 +0000 (15:43 +0300)]
mfd: ab8500-core: Return zero in get_register_interruptible()

[ Upstream commit 10628e3ecf544fa2e4e24f8e112d95c37884dc98 ]

This function is supposed to return zero on success or negative error
codes on error.  Unfortunately, there is a bug so it sometimes returns
non-zero, positive numbers on success.

I noticed this bug during review and I can't test it.  It does appear
that the return is sometimes propogated back to _regmap_read() where all
non-zero returns are treated as failure so this may affect run time.

Fixes: 47c1697508f2 ("mfd: Align ab8500 with the abx500 interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: mt6397: Do not call irq_domain_remove if PMIC unsupported
Nicolas Boichat [Mon, 22 Oct 2018 02:55:06 +0000 (10:55 +0800)]
mfd: mt6397: Do not call irq_domain_remove if PMIC unsupported

[ Upstream commit a177276aa098aa47a100d51a13eaaef029604b6d ]

If the PMIC ID is unknown, the current code would call
irq_domain_remove and panic, as pmic->irq_domain is only
initialized by mt6397_irq_init.

Return immediately with an error, if the chip ID is unsupported.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: db8500-prcmu: Fix some section annotations
Nathan Chancellor [Thu, 18 Oct 2018 00:56:28 +0000 (17:56 -0700)]
mfd: db8500-prcmu: Fix some section annotations

[ Upstream commit a3888f62fe66429fad3be7f2ba962e1e08c26fd6 ]

When building the kernel with Clang, the following section mismatch
warnings appear:

WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from
the function db8500_prcmu_probe() to the function
.init.text:init_prcm_registers()
The function db8500_prcmu_probe() references
the function __init init_prcm_registers().
This is often because db8500_prcmu_probe lacks a __init
annotation or the annotation of init_prcm_registers is wrong.

WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from
the function db8500_prcmu_probe() to the function
.init.text:fw_project_name()
The function db8500_prcmu_probe() references
the function __init fw_project_name().
This is often because db8500_prcmu_probe lacks a __init
annotation or the annotation of fw_project_name is wrong.

db8500_prcmu_probe should not be marked as __init so remove the __init
annotation from fw_project_name and init_prcm_registers.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: twl-core: Fix section annotations on {,un}protect_pm_master
Nathan Chancellor [Wed, 17 Oct 2018 17:13:23 +0000 (10:13 -0700)]
mfd: twl-core: Fix section annotations on {,un}protect_pm_master

[ Upstream commit 8838555089f0345b87f4277fe5a8dd647dc65589 ]

When building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from
the function twl_probe() to the function
.init.text:unprotect_pm_master()
The function twl_probe() references
the function __init unprotect_pm_master().
This is often because twl_probe lacks a __init
annotation or the annotation of unprotect_pm_master is wrong.

Remove the __init annotation on the *protect_pm_master functions so
there is no more mismatch.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agopvcalls-back: set -ENOTCONN in pvcalls_conn_back_read
Stefano Stabellini [Fri, 21 Dec 2018 23:06:33 +0000 (15:06 -0800)]
pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read

[ Upstream commit e6587cdbd732eacb4c7ce592ed46f7bbcefb655f ]

When a connection is closing we receive on pvcalls_sk_state_change
notification. Instead of setting the connection as closed immediately
(-ENOTCONN), let's read one more time from it: pvcalls_conn_back_read
will set the connection as closed when necessary.

That way, we avoid races between pvcalls_sk_state_change and
pvcalls_back_ioworker.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agopvcalls-front: properly allocate sk
Stefano Stabellini [Fri, 21 Dec 2018 23:06:31 +0000 (15:06 -0800)]
pvcalls-front: properly allocate sk

[ Upstream commit beee1fbe8f7d57d6ebaa5188f9f4db89c2077196 ]

Don't use kzalloc: it ends up leaving sk->sk_prot not properly
initialized. Use sk_alloc instead and define our own trivial struct
proto.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agopvcalls-front: don't try to free unallocated rings
Stefano Stabellini [Fri, 21 Dec 2018 23:06:30 +0000 (15:06 -0800)]
pvcalls-front: don't try to free unallocated rings

[ Upstream commit 96283f9a084e23d7cda2d3c5d1ffa6df6cf1ecec ]

inflight_req_id is 0 when initialized. If inflight_req_id is 0, there is
no accept_map to free. Fix the check in pvcalls_front_release.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agopvcalls-front: read all data before closing the connection
Stefano Stabellini [Fri, 21 Dec 2018 23:06:29 +0000 (15:06 -0800)]
pvcalls-front: read all data before closing the connection

[ Upstream commit b79470b64fa9266948d1ce8d825ced94c4f63293 ]

When a connection is closing in_error is set to ENOTCONN. There could
still be outstanding data on the ring left by the backend. Before
closing the connection on the frontend side, drain the ring.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells
Vignesh R [Mon, 3 Dec 2018 08:01:17 +0000 (13:31 +0530)]
mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells

[ Upstream commit b40ee006fe6a8a25093434e5d394128c356a48f3 ]

Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that
different instances are uniquely identified. This is required in order
to support registering of multiple instances of same ti_am335x_tscadc IP.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agobacklight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables
Heiko Stuebner [Mon, 12 Nov 2018 09:02:57 +0000 (10:02 +0100)]
backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables

[ Upstream commit 61170ee9386888f1e6f7e9cc58e8d9a8c2a3c1dd ]

Commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly
to human eye") made the parse-dt function return early when using an auto-
generated brightness-table, but didn't take into account that some more
settings were handled below the brightness handling, like power-on-delays
and also setting the pdata enable-gpio to -EINVAL.

This surfaces for example in the case of a backlight without any
enable-gpio which then tries to use gpio-0 in error.

Fix this by simply moving the trailing settings above the brightness
handling.

Fixes: 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoKEYS: allow reaching the keys quotas exactly
Eric Biggers [Thu, 14 Feb 2019 16:20:01 +0000 (16:20 +0000)]
KEYS: allow reaching the keys quotas exactly

commit a08bf91ce28ed3ae7b6fef35d843fef8dc8c2cd9 upstream.

If the sysctl 'kernel.keys.maxkeys' is set to some number n, then
actually users can only add up to 'n - 1' keys.  Likewise for
'kernel.keys.maxbytes' and the root_* versions of these sysctls.  But
these sysctls are apparently supposed to be *maximums*, as per their
names and all documentation I could find -- the keyrings(7) man page,
Documentation/security/keys/core.rst, and all the mentions of EDQUOT
meaning that the key quota was *exceeded* (as opposed to reached).

Thus, fix the code to allow reaching the quotas exactly.

Fixes: 0b77f5bfb45c ("keys: make the keyring quotas controllable through /proc/sys")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoALSA: hda/realtek: Disable PC beep in passthrough on alc285
Hui Wang [Thu, 14 Feb 2019 03:41:33 +0000 (11:41 +0800)]
ALSA: hda/realtek: Disable PC beep in passthrough on alc285

commit c8c6ee611926685a7d753409e0a6e48b9e1b8748 upstream.

It is reported that there's a constant background "hum/whitenoise"
in the headset on the Lenovo X1 machines with the codec alc285, and it
is confirmed that if we run the command below, the noise will stop.
 sudo hda-verb /dev/snd/hwC0D0 0x1d SET_PIN_WIDGET_CONTROL 0x0

Then I consulted this issue with Kailang, he told me the pin 0x1d on
this codec is used for PC beep in, the noise probably comes from this
pin and we can also disable the PC beep in passthrough, then the PC
beep in will not affect other sound playback.

Fixes: c4cfcf6f4297 ("ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1660581
Cc: <stable@vger.kernel.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoALSA: hda/realtek - Headset microphone and internal speaker support for System76...
Jeremy Soller [Wed, 13 Feb 2019 17:56:19 +0000 (10:56 -0700)]
ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5

commit 7f665b1c3283aae5b61843136d0a8ee808ba3199 upstream.

On the System76 Oryx Pro (oryp5), there is a headset microphone input
attached to 0x19 that does not have a jack detect. In order to get it
working, the pin configuration needs to be set correctly, and the
ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is
similar to the MIC_NO_PRESENCE fixups for some Dell laptops, except we
have a separate microphone jack that is already configured correctly.

Since the ALC1220 does not have a fixup similar to
ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, I have exposed the fixup from the
ALC269 in a way that it can be accessed from the
alc1220_fixup_system76_oryp5 function. In addition, the
alc1220_fixup_clevo_p950 needs to be applied to gain speaker output.

Signed-off-by: Jeremy Soller <jeremy@system76.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoproc, oom: do not report alien mms when setting oom_score_adj
Michal Hocko [Thu, 21 Feb 2019 06:19:42 +0000 (22:19 -0800)]
proc, oom: do not report alien mms when setting oom_score_adj

commit b2b469939e93458753cfbf8282ad52636495965e upstream.

Tetsuo has reported that creating a thousands of processes sharing MM
without SIGHAND (aka alien threads) and setting
/proc/<pid>/oom_score_adj will swamp the kernel log and takes ages [1]
to finish.  This is especially worrisome that all that printing is done
under RCU lock and this can potentially trigger RCU stall or softlockup
detector.

The primary reason for the printk was to catch potential users who might
depend on the behavior prior to 44a70adec910 ("mm, oom_adj: make sure
processes sharing mm have same view of oom_score_adj") but after more
than 2 years without a single report I guess it is safe to simply remove
the printk altogether.

The next step should be moving oom_score_adj over to the mm struct and
remove all the tasks crawling as suggested by [2]

[1] http://lkml.kernel.org/r/97fce864-6f75-bca5-14bc-12c9f890e740@i-love.sakura.ne.jp
[2] http://lkml.kernel.org/r/20190117155159.GA4087@dhcp22.suse.cz

Link: http://lkml.kernel.org/r/20190212102129.26288-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Yong-Taek Lee <ytk.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonuma: change get_mempolicy() to use nr_node_ids instead of MAX_NUMNODES
Ralph Campbell [Thu, 21 Feb 2019 06:18:58 +0000 (22:18 -0800)]
numa: change get_mempolicy() to use nr_node_ids instead of MAX_NUMNODES

commit 050c17f239fd53adb55aa768d4f41bc76c0fe045 upstream.

The system call, get_mempolicy() [1], passes an unsigned long *nodemask
pointer and an unsigned long maxnode argument which specifies the length
of the user's nodemask array in bits (which is rounded up).  The manual
page says that if the maxnode value is too small, get_mempolicy will
return EINVAL but there is no system call to return this minimum value.
To determine this value, some programs search /proc/<pid>/status for a
line starting with "Mems_allowed:" and use the number of digits in the
mask to determine the minimum value.  A recent change to the way this line
is formatted [2] causes these programs to compute a value less than
MAX_NUMNODES so get_mempolicy() returns EINVAL.

Change get_mempolicy(), the older compat version of get_mempolicy(), and
the copy_nodes_to_user() function to use nr_node_ids instead of
MAX_NUMNODES, thus preserving the defacto method of computing the minimum
size for the nodemask array and the maxnode argument.

[1] http://man7.org/linux/man-pages/man2/get_mempolicy.2.html
[2] https://lore.kernel.org/lkml/1545405631-6808-1-git-send-email-longman@redhat.com

Link: http://lkml.kernel.org/r/20190211180245.22295-1-rcampbell@nvidia.com
Fixes: 4fb8e5b89bcbbbb ("include/linux/nodemask.h: use nr_node_ids (not MAX_NUMNODES) in __nodemask_pr_numnodes()")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoceph: avoid repeatedly adding inode to mdsc->snap_flush_list
Yan, Zheng [Mon, 11 Feb 2019 07:18:52 +0000 (15:18 +0800)]
ceph: avoid repeatedly adding inode to mdsc->snap_flush_list

commit 04242ff3ac0abbaa4362f97781dac268e6c3541a upstream.

Otherwise, mdsc->snap_flush_list may get corrupted.

Cc: stable@vger.kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agolibceph: handle an empty authorize reply
Ilya Dryomov [Tue, 5 Feb 2019 19:30:27 +0000 (20:30 +0100)]
libceph: handle an empty authorize reply

commit 0fd3fd0a9bb0b02b6435bb7070e9f7b82a23f068 upstream.

The authorize reply can be empty, for example when the ticket used to
build the authorizer is too old and TAG_BADAUTHORIZER is returned from
the service.  Calling ->verify_authorizer_reply() results in an attempt
to decrypt and validate (somewhat) random data in au->buf (most likely
the signature block from calc_signature()), which fails and ends up in
con_fault_finish() with !con->auth_retry.  The ticket isn't invalidated
and the connection is retried again and again until a new ticket is
obtained from the monitor:

  libceph: osd2 192.168.122.1:6809 bad authorize reply
  libceph: osd2 192.168.122.1:6809 bad authorize reply
  libceph: osd2 192.168.122.1:6809 bad authorize reply
  libceph: osd2 192.168.122.1:6809 bad authorize reply

Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry.

Cc: stable@vger.kernel.org
Fixes: 5c056fdc5b47 ("libceph: verify authorize reply on connect")
Link: https://tracker.ceph.com/issues/20164
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomac80211: Free mpath object when rhashtable insertion fails
Herbert Xu [Thu, 14 Feb 2019 14:03:25 +0000 (22:03 +0800)]
mac80211: Free mpath object when rhashtable insertion fails

commit 4ff3a9d14c6c06eaa4e5976c61599ea2bd9e81b2 upstream.

When rhashtable insertion fails the mesh table code doesn't free
the now-orphan mesh path object.  This patch fixes that.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomac80211: Use linked list instead of rhashtable walk for mesh tables
Herbert Xu [Thu, 14 Feb 2019 14:03:24 +0000 (22:03 +0800)]
mac80211: Use linked list instead of rhashtable walk for mesh tables

commit b4c3fbe6360178dc2181b7b43b7ae793a192b282 upstream.

The mesh table code walks over hash tables for two purposes.  First of
all it's used as part of a netlink dump process, but it is also used
for looking up entries to delete using criteria other than the hash
key.

The second purpose is directly contrary to the design specification
of rhashtable walks.  It is only meant for use by netlink dumps.

This is because rhashtable is resizable and you cannot obtain a
stable walk over it during a resize process.

In fact mesh's use of rhashtable for dumping is bogus too.  Rather
than using rhashtable walk's iterator to keep track of the current
position, it always converts the current position to an integer
which defeats the purpose of the iterator.

Therefore this patch converts all uses of rhashtable walk into a
simple linked list.

This patch also adds a new spin lock to protect the hash table
insertion/removal as well as the walk list modifications.  In fact
the previous code was buggy as the removals can race with each
other, potentially resulting in a double-free.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomac80211: Restore vif beacon interval if start ap fails
Rakesh Pillai [Fri, 15 Feb 2019 08:46:02 +0000 (14:16 +0530)]
mac80211: Restore vif beacon interval if start ap fails

commit 83e37e0bdd1470bbe6612250b745ad39b1a7b130 upstream.

The starting of AP interface can fail due to invalid
beacon interval, which does not match the minimum gcd
requirement set by the wifi driver. In such case, the
beacon interval of that interface gets updated with
that invalid beacon interval.

The next time that interface is brought up in AP mode,
an interface combination check is performed and the
beacon interval is taken from the previously set value.

In a case where an invalid beacon interval, i.e. a beacon
interval value which does not satisfy the minimum gcd criteria
set by the driver, is set, all the subsequent trials to
bring that interface in AP mode will fail, even if the
subsequent trials have a valid beacon interval.

To avoid this, in case of a failure in bringing up an
interface in AP mode due to interface combination error,
the interface beacon interval which is stored in bss
conf, needs to be restored with the last working value
of beacon interval.

Tested on ath10k using WCN3990.

Cc: stable@vger.kernel.org
Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agogpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2
Lubomir Rintel [Wed, 13 Feb 2019 23:06:18 +0000 (00:06 +0100)]
gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2

commit af14b2c98adb85e9517390bb88309338b9075350 upstream.

Similarly to PXA3xx, pinctrl-single can't set pin direction on MMP2 either.
See also: commit 9dabfdd84bdfa ("gpio: pxa: disable pinctrl calls for
PXA3xx")

Cc: stable@vger.kernel.org
Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agogpio: MT7621: use a per instance irq_chip structure
René van Dorst [Wed, 30 Jan 2019 16:10:49 +0000 (17:10 +0100)]
gpio: MT7621: use a per instance irq_chip structure

commit fa84667b98fd1a191b2465d66b440bda6714b3bf upstream.

This fixes the kernel complains:
gpio gpiochip1: (1e000600.gpio-bank1): detected irqchip that is shared
    with multiple gpiochips: please fix the driver.
gpio gpiochip2: (1e000600.gpio-bank2): detected irqchip that is shared
    with multiple gpiochips: please fix the driver.

Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621")
Cc: stable@vger.kernel.org
Signed-off-by: René van Dorst <opensource@vdorst.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Tested-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoMIPS: eBPF: Always return sign extended 32b values
Paul Burton [Fri, 15 Feb 2019 20:14:15 +0000 (20:14 +0000)]
MIPS: eBPF: Always return sign extended 32b values

commit 13443154f6cac61d148471ede6d7f1f6b5ea946a upstream.

The function prototype used to call JITed eBPF code (ie. the type of the
struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64
ABI that MIPS64 kernels target defines that 32 bit integers should
always be sign extended when passed in registers as either arguments or
return values.

This means that when returning any value which may not already be sign
extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform
that sign extension in order to comply with the n64 ABI. Without this we
see strange looking test failures from test_bpf.ko, such as:

  test_bpf: #65 ALU64_MOV_X:
    dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)

Although the return value printed matches the expected value, this is
only because printf is only examining the least significant 32 bits of
the 64 bit register value we returned. The register holding the expected
value is sign extended whilst the v0 register was set to a zero extended
value by our JITed code, so when compared by a conditional branch
instruction the values are not equal.

We already handle this when the return value register is of type
REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotracing: Fix number of entries in trace header
Quentin Perret [Thu, 14 Feb 2019 15:29:50 +0000 (15:29 +0000)]
tracing: Fix number of entries in trace header

commit 9e7382153f80ba45a0bbcd540fb77d4b15f6e966 upstream.

The following commit

  441dae8f2f29 ("tracing: Add support for display of tgid in trace output")

removed the call to print_event_info() from print_func_help_header_irq()
which results in the ftrace header not reporting the number of entries
written in the buffer. As this wasn't the original intent of the patch,
re-introduce the call to print_event_info() to restore the orginal
behaviour.

Link: http://lkml.kernel.org/r/20190214152950.4179-1-quentin.perret@arm.com
Acked-by: Joel Fernandes <joelaf@google.com>
Cc: stable@vger.kernel.org
Fixes: 441dae8f2f29 ("tracing: Add support for display of tgid in trace output")
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction
Mathieu Desnoyers [Tue, 5 Feb 2019 15:37:40 +0000 (16:37 +0100)]
ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction

commit 0ac569bf6a7983c0c5747d6df8db9dc05bc92b6c upstream.

commit e46daee53bb5 ("ARM: 8806/1: kprobes: Fix false positive with
FORTIFY_SOURCE") introduced a regression in optimized kprobes. It
triggers "invalid instruction" oopses when using kprobes instrumentation
through lttng and perf. This commit was introduced in kernel v4.20, and
has been backported to stable kernels 4.19 and 4.14.

This crash was also reported by Hongzhi Song on the redhat bugzilla
where the patch was originally introduced.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1639397
Link: https://bugs.lttng.org/issues/1174
Link: https://lore.kernel.org/lkml/342740659.2887.1549307721609.JavaMail.zimbra@efficios.com
Fixes: e46daee53bb5 ("ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: Robert Berger <Robert.Berger@ReliableEmbeddedSystems.com>
Tested-by: Robert Berger <Robert.Berger@ReliableEmbeddedSystems.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Robert Berger <Robert.Berger@ReliableEmbeddedSystems.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org> # v4.14+
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoLinux 4.19.25 v4.19.25
Greg Kroah-Hartman [Sat, 23 Feb 2019 08:07:27 +0000 (09:07 +0100)]
Linux 4.19.25

5 years agoax25: fix possible use-after-free
Eric Dumazet [Tue, 22 Jan 2019 18:40:59 +0000 (10:40 -0800)]
ax25: fix possible use-after-free

commit 63530aba7826a0f8e129874df9c4d264f9db3f9e upstream.

syzbot found that ax25 routes where not properly protected
against concurrent use [1].

In this particular report the bug happened while
copying ax25->digipeat.

Fix this problem by making sure we call ax25_get_route()
while ax25_route_lock is held, so that no modification
could happen while using the route.

The current two ax25_get_route() callers do not sleep,
so this change should be fine.

Once we do that, ax25_get_route() no longer needs to
grab a reference on the found route.

[1]
ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113
Read of size 66 at addr ffff888066641a80 by task syz-executor2/531

ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1db/0x2d0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x24/0x50 mm/kasan/common.c:130
 memcpy include/linux/string.h:352 [inline]
 kmemdup+0x42/0x60 mm/util.c:113
 kmemdup include/linux/string.h:425 [inline]
 ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424
 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224
 __sys_connect+0x357/0x490 net/socket.c:1664
 __do_sys_connect net/socket.c:1675 [inline]
 __se_sys_connect net/socket.c:1672 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1672
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458099
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099
RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4
R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff

Allocated by task 526:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:496 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
 kmalloc include/linux/slab.h:545 [inline]
 ax25_rt_add net/ax25/ax25_route.c:95 [inline]
 ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233
 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
 sock_do_ioctl+0xe2/0x400 net/socket.c:950
 sock_ioctl+0x32f/0x6c0 net/socket.c:1074
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
Freed by task 550:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
 __cache_free mm/slab.c:3487 [inline]
 kfree+0xcf/0x230 mm/slab.c:3806
 ax25_rt_add net/ax25/ax25_route.c:92 [inline]
 ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233
 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
 sock_do_ioctl+0xe2/0x400 net/socket.c:950
 sock_ioctl+0x32f/0x6c0 net/socket.c:1074
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888066641a80
 which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
 96-byte region [ffff888066641a80ffff888066641ae0)
The buggy address belongs to the page:
page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0
flags: 0x1fffc0000000200(slab)
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0
raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc
>ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
                   ^
 ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomISDN: fix a race in dev_expire_timer()
Eric Dumazet [Tue, 5 Feb 2019 23:38:44 +0000 (15:38 -0800)]
mISDN: fix a race in dev_expire_timer()

commit bdcc5bc25548ef6b08e2e43937148f907c212292 upstream.

Since mISDN_close() uses dev->pending to iterate over active
timers, there is a chance that one timer got removed from the
->pending list in dev_expire_timer() but that the thread
has not called yet wake_up_interruptible()

So mISDN_close() could miss this and free dev before
completion of at least one dev_expire_timer()

syzbot was able to catch this race :

BUG: KASAN: use-after-free in register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827
Write of size 8 at addr ffff88809fc18948 by task syz-executor1/24769

CPU: 1 PID: 24769 Comm: syz-executor1 Not tainted 5.0.0-rc5 #60
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_store8_noabort+0x17/0x20 mm/kasan/generic_report.c:140
 register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827
 __lock_acquire+0x11f/0x4700 kernel/locking/lockdep.c:3224
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3841
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152
 __wake_up_common_lock+0xc7/0x190 kernel/sched/wait.c:120
 __wake_up+0xe/0x10 kernel/sched/wait.c:145
 dev_expire_timer+0xe4/0x3b0 drivers/isdn/mISDN/timerdev.c:174
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
protocol 88fb is buggy, dev hsr_slave_0
protocol 88fb is buggy, dev hsr_slave_1
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
 </IRQ>
RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:101
Code: 90 90 90 90 55 48 89 e5 48 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 98 12 92 7e 81 e2 00 01 1f 00 75 2b 8b 90 d8 12 00 00 <83> fa 02 75 20 48 8b 88 e0 12 00 00 8b 80 dc 12 00 00 48 8b 11 48
RSP: 0018:ffff8880589b7a60 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff888087ce25c0 RBX: 0000000000000001 RCX: ffffffff818f8ca3
RDX: 0000000000000000 RSI: ffffffff818f8b48 RDI: 0000000000000001
RBP: ffff8880589b7a60 R08: ffff888087ce25c0 R09: ffffed1015d25bd0
R10: ffffed1015d25bcf R11: ffff8880ae92de7b R12: ffffea0001ae4680
R13: ffffea0001ae4688 R14: 0000000000000000 R15: ffffea0001b41648
 PageIdle include/linux/page-flags.h:398 [inline]
 page_is_idle include/linux/page_idle.h:29 [inline]
 mark_page_accessed+0x618/0x1140 mm/swap.c:398
 touch_buffer fs/buffer.c:59 [inline]
 __find_get_block+0x312/0xcc0 fs/buffer.c:1298
 sb_find_get_block include/linux/buffer_head.h:338 [inline]
 recently_deleted fs/ext4/ialloc.c:682 [inline]
 find_inode_bit.isra.0+0x202/0x510 fs/ext4/ialloc.c:722
 __ext4_new_inode+0x14ad/0x52c0 fs/ext4/ialloc.c:914
 ext4_symlink+0x3f8/0xbe0 fs/ext4/namei.c:3096
 vfs_symlink fs/namei.c:4126 [inline]
 vfs_symlink+0x378/0x5d0 fs/namei.c:4112
 do_symlinkat+0x22b/0x290 fs/namei.c:4153
 __do_sys_symlink fs/namei.c:4172 [inline]
 __se_sys_symlink fs/namei.c:4170 [inline]
 __x64_sys_symlink+0x59/0x80 fs/namei.c:4170
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457b67
Code: 0f 1f 00 b8 5c 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 6d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 58 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 4d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff045ce0f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000058
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 0000000000457b67
RDX: 00007fff045ce173 RSI: 00000000004bd63f RDI: 00007fff045ce160
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013
R10: 0000000000000075 R11: 0000000000000202 R12: 0000000000000000
R13: 0000000000000001 R14: 000000000000029b R15: 0000000000000001

Allocated by task 24763:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:496 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
 kmalloc include/linux/slab.h:545 [inline]
 mISDN_open+0x9a/0x270 drivers/isdn/mISDN/timerdev.c:59
 misc_open+0x398/0x4c0 drivers/char/misc.c:141
 chrdev_open+0x247/0x6b0 fs/char_dev.c:417
 do_dentry_open+0x47d/0x1130 fs/open.c:771
 vfs_open+0xa0/0xd0 fs/open.c:880
 do_last fs/namei.c:3418 [inline]
 path_openat+0x10d7/0x4690 fs/namei.c:3534
 do_filp_open+0x1a1/0x280 fs/namei.c:3564
 do_sys_open+0x3fe/0x5d0 fs/open.c:1063
 __do_sys_openat fs/open.c:1090 [inline]
 __se_sys_openat fs/open.c:1084 [inline]
 __x64_sys_openat+0x9d/0x100 fs/open.c:1084
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 24762:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
 __cache_free mm/slab.c:3487 [inline]
 kfree+0xcf/0x230 mm/slab.c:3806
 mISDN_close+0x2a1/0x390 drivers/isdn/mISDN/timerdev.c:97
 __fput+0x2df/0x8d0 fs/file_table.c:278
 ____fput+0x16/0x20 fs/file_table.c:309
 task_work_run+0x14a/0x1c0 kernel/task_work.c:113
 tracehook_notify_resume include/linux/tracehook.h:188 [inline]
 exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:166
 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
 do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff88809fc18900
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 72 bytes inside of
 192-byte region [ffff88809fc18900ffff88809fc189c0)
The buggy address belongs to the page:
page:ffffea00027f0600 count:1 mapcount:0 mapping:ffff88812c3f0040 index:0xffff88809fc18000
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000269f648 ffffea00029f7408 ffff88812c3f0040
raw: ffff88809fc18000 ffff88809fc18000 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88809fc18800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88809fc18880: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88809fc18900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                              ^
 ffff88809fc18980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff88809fc18a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonet/x25: do not hold the cpu too long in x25_new_lci()
Eric Dumazet [Fri, 8 Feb 2019 20:41:05 +0000 (12:41 -0800)]
net/x25: do not hold the cpu too long in x25_new_lci()

commit cf657d22ee1f0e887326a92169f2e28dc932fd10 upstream.

Due to quadratic behavior of x25_new_lci(), syzbot was able
to trigger an rcu stall.

Fix this by not blocking BH for the whole duration of
the function, and inserting a reschedule point when possible.

If we care enough, using a bitmap could get rid of the quadratic
behavior.

syzbot report :

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    0-...!: (10500 ticks this GP) idle=4fa/1/0x4000000000000002 softirq=283376/283376 fqs=0
rcu:     (t=10501 jiffies g=383105 q=136)
rcu: rcu_preempt kthread starved for 10502 jiffies! g383105 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: RCU grace-period kthread stack dump:
rcu_preempt     I28928    10      2 0x80000000
Call Trace:
 context_switch kernel/sched/core.c:2844 [inline]
 __schedule+0x817/0x1cc0 kernel/sched/core.c:3485
 schedule+0x92/0x180 kernel/sched/core.c:3529
 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803
 rcu_gp_fqs_loop kernel/rcu/tree.c:1948 [inline]
 rcu_gp_kthread+0x956/0x17a0 kernel/rcu/tree.c:2105
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
NMI backtrace for cpu 0
CPU: 0 PID: 8759 Comm: syz-executor2 Not tainted 5.0.0-rc4+ #51
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101
 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62
 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
 rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1211
 print_cpu_stall kernel/rcu/tree.c:1348 [inline]
 check_cpu_stall kernel/rcu/tree.c:1422 [inline]
 rcu_pending kernel/rcu/tree.c:3018 [inline]
 rcu_check_callbacks.cold+0x500/0xa4a kernel/rcu/tree.c:2521
 update_process_times+0x32/0x80 kernel/time/timer.c:1635
 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161
 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271
 __run_hrtimer kernel/time/hrtimer.c:1389 [inline]
 __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451
 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509
 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline]
 smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
 </IRQ>
RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline]
RIP: 0010:queued_write_lock_slowpath+0x13e/0x290 kernel/locking/qrwlock.c:86
Code: 00 00 fc ff df 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 <41> 0f b6 55 00 41 38 d7 7c eb 84 d2 74 e7 48 89 df e8 6c 0f 4f 00
RSP: 0018:ffff88805f117bd8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000300 RBX: ffffffff89413ba0 RCX: 1ffffffff1282774
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89413ba0
RBP: ffff88805f117c70 R08: 1ffffffff1282774 R09: fffffbfff1282775
R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: 00000000000000ff
R13: fffffbfff1282774 R14: 1ffff1100be22f7d R15: 0000000000000003
 queued_write_lock include/asm-generic/qrwlock.h:104 [inline]
 do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203
 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline]
 _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312
 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267
 x25_bind+0x273/0x340 net/x25/af_x25.c:705
 __sys_bind+0x23f/0x290 net/socket.c:1505
 __do_sys_bind net/socket.c:1516 [inline]
 __se_sys_bind net/socket.c:1514 [inline]
 __x64_sys_bind+0x73/0xb0 net/socket.c:1514
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e39
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fafccd0dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39
RDX: 0000000000000012 RSI: 0000000020000240 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fafccd0e6d4
R13: 00000000004bdf8b R14: 00000000004ce4b8 R15: 00000000ffffffff
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8752 Comm: syz-executor4 Not tainted 5.0.0-rc4+ #51
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__x25_find_socket+0x78/0x120 net/x25/af_x25.c:328
Code: 89 f8 48 c1 e8 03 80 3c 18 00 0f 85 a6 00 00 00 4d 8b 64 24 68 4d 85 e4 74 7f e8 03 97 3d fb 49 83 ec 68 74 74 e8 f8 96 3d fb <49> 8d bc 24 88 04 00 00 48 89 f8 48 c1 e8 03 0f b6 04 18 84 c0 74
RSP: 0018:ffff8880639efc58 EFLAGS: 00000246
RAX: 0000000000040000 RBX: dffffc0000000000 RCX: ffffc9000e677000
RDX: 0000000000040000 RSI: ffffffff863244b8 RDI: ffff88806a764628
RBP: ffff8880639efc80 R08: ffff8880a80d05c0 R09: fffffbfff1282775
R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: ffff88806a7645c0
R13: 0000000000000001 R14: ffff88809f29ac00 R15: 0000000000000000
FS:  00007fe8d0c58700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32823000 CR3: 00000000672eb000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 x25_new_lci net/x25/af_x25.c:357 [inline]
 x25_connect+0x374/0xdf0 net/x25/af_x25.c:786
 __sys_connect+0x266/0x330 net/socket.c:1686
 __do_sys_connect net/socket.c:1697 [inline]
 __se_sys_connect net/socket.c:1694 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1694
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e39
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe8d0c57c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39
RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe8d0c586d4
R13: 00000000004be378 R14: 00000000004ceb00 R15: 00000000ffffffff

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: linux-x25@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonetfilter: nf_nat_snmp_basic: add missing length checks in ASN.1 cbs
Jann Horn [Wed, 6 Feb 2019 21:56:15 +0000 (22:56 +0100)]
netfilter: nf_nat_snmp_basic: add missing length checks in ASN.1 cbs

commit c4c07b4d6fa1f11880eab8e076d3d060ef3f55fc upstream.

The generic ASN.1 decoder infrastructure doesn't guarantee that callbacks
will get as much data as they expect; callbacks have to check the `datalen`
parameter before looking at `data`. Make sure that snmp_version() and
snmp_helper() don't read/write beyond the end of the packet data.

(Also move the assignment to `pdata` down below the check to make it clear
that it isn't necessarily a pointer we can use before the `datalen` check.)

Fixes: cc2d58634e0f ("netfilter: nf_nat_snmp_basic: use asn1 decoder library")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agosunrpc: fix 4 more call sites that were using stack memory with a scatterlist
Scott Mayhew [Fri, 15 Feb 2019 18:42:02 +0000 (13:42 -0500)]
sunrpc: fix 4 more call sites that were using stack memory with a scatterlist

commit e7afe6c1d486b516ed586dcc10b3e7e3e85a9c2b upstream.

While trying to reproduce a reported kernel panic on arm64, I discovered
that AUTH_GSS basically doesn't work at all with older enctypes on arm64
systems with CONFIG_VMAP_STACK enabled.  It turns out there still a few
places using stack memory with scatterlists, causing krb5_encrypt() and
krb5_decrypt() to produce incorrect results (or a BUG if CONFIG_DEBUG_SG
is enabled).

Tested with cthon on v4.0/v4.1/v4.2 with krb5/krb5i/krb5p using
des3-cbc-sha1 and arcfour-hmac-md5.

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoPCI: Fix __initdata issue with "pci=disable_acs_redir" parameter
Logan Gunthorpe [Thu, 17 Jan 2019 14:46:34 +0000 (08:46 -0600)]
PCI: Fix __initdata issue with "pci=disable_acs_redir" parameter

commit d2fd6e81912a665993b24dcdc1c1384a42a54f7e upstream.

The disable_acs_redir parameter stores a pointer to the string passed to
pci_setup().  However, the string passed to PCI setup is actually a
temporary copy allocated in static __initdata memory.  After init, once the
memory is freed, it is no longer valid to reference this pointer.

This bug was noticed in v5.0-rc1 after a change in commit c5eb1190074c
("PCI / PM: Allow runtime PM without callback functions") caused
pci_disable_acs_redir() to be called during shutdown which manifested
as an unable to handle kernel paging request at:

  RIP: 0010:pci_enable_acs+0x3f/0x1e0
  Call Trace:
     pci_restore_state.part.44+0x159/0x3c0
     pci_restore_standard_config+0x33/0x40
     pci_pm_runtime_resume+0x2b/0xd0
     ? pci_restore_standard_config+0x40/0x40
     __rpm_callback+0xbc/0x1b0
     rpm_callback+0x1f/0x70
     ? pci_restore_standard_config+0x40/0x40
      rpm_resume+0x4f9/0x710
     ? pci_conf1_read+0xb6/0xf0
     ? pci_conf1_write+0xb2/0xe0
     __pm_runtime_resume+0x47/0x70
     pci_device_shutdown+0x1e/0x60
     device_shutdown+0x14a/0x1f0
     kernel_restart+0xe/0x50
     __do_sys_reboot+0x1ee/0x210
     ? __fput+0x144/0x1d0
     do_writev+0x5e/0xf0
     ? do_writev+0x5e/0xf0
     do_syscall_64+0x48/0xf0
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

It was also likely possible to trigger this bug when hotplugging PCI
devices.

To fix this, instead of storing a pointer, we use kstrdup() to copy the
disable_acs_redir_param to its own buffer which will never be freed.

Fixes: aaca43fda742 ("PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support")
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agommc: meson-gx: fix interrupt name
Martin Blumenstingl [Sat, 9 Feb 2019 00:58:50 +0000 (01:58 +0100)]
mmc: meson-gx: fix interrupt name

commit 83e418a805d880a8b18add07f94d19b2a5a80307 upstream.

Commit bb364890323cca ("mmc: meson-gx: Free irq in release() callback")
changed the _probe code to use request_threaded_irq() instead of
devm_request_threaded_irq().
Unfortunately this removes a fallback for the interrupt name:
devm_request_threaded_irq() uses the device name as fallback if the
given IRQ name is NULL. request_threaded_irq() has no such fallback,
thus /proc/interrupts shows "(null)" instead.

Explicitly pass the dev_name() so we get the IRQ name shown in
/proc/interrupts again.
While here, also fix the indentation of the request_threaded_irq()
parameter list.

Fixes: bb364890323cca ("mmc: meson-gx: Free irq in release() callback")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoscsi: target/core: Use kmem_cache_free() instead of kfree()
Wei Yongjun [Mon, 17 Dec 2018 12:19:53 +0000 (12:19 +0000)]
scsi: target/core: Use kmem_cache_free() instead of kfree()

commit 8b2db98e814a5ec45e8800fc22ca9000ae0a517b upstream.

memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().

Fixes: ad669505c4e9 ("scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agohwmon: (lm80) Fix missing unlock on error in set_fan_div()
Wei Yongjun [Wed, 26 Dec 2018 11:28:24 +0000 (11:28 +0000)]
hwmon: (lm80) Fix missing unlock on error in set_fan_div()

commit 07bd14ccc3049f9c0147a91a4227a571f981601a upstream.

Add the missing unlock before return from function set_fan_div()
in the error handling case.

Fixes: c9c63915519b ("hwmon: (lm80) fix a missing check of the status of SMBus read")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agonet: Do not allocate page fragments that are not skb aligned
Alexander Duyck [Fri, 15 Feb 2019 22:44:18 +0000 (14:44 -0800)]
net: Do not allocate page fragments that are not skb aligned

[ Upstream commit 3bed3cc4156eedf652b4df72bdb35d4f1a2a739d ]

This patch addresses the fact that there are drivers, specifically tun,
that will call into the network page fragment allocators with buffer sizes
that are not cache aligned. Doing this could result in data alignment
and DMA performance issues as these fragment pools are also shared with the
skb allocator and any other devices that will use napi_alloc_frags or
netdev_alloc_frags.

Fixes: ffde7328a36d ("net: Split netdev_alloc_frag into __alloc_page_frag and add __napi_alloc_frag")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotcp: tcp_v4_err() should be more careful
Eric Dumazet [Fri, 15 Feb 2019 21:36:21 +0000 (13:36 -0800)]
tcp: tcp_v4_err() should be more careful

[ Upstream commit 2c4cc9712364c051b1de2d175d5fbea6be948ebf ]

ICMP handlers are not very often stressed, we should
make them more resilient to bugs that might surface in
the future.

If there is no packet in retransmit queue, we should
avoid a NULL deref.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotcp: clear icsk_backoff in tcp_write_queue_purge()
Eric Dumazet [Fri, 15 Feb 2019 21:36:20 +0000 (13:36 -0800)]
tcp: clear icsk_backoff in tcp_write_queue_purge()

[ Upstream commit 04c03114be82194d4a4858d41dba8e286ad1787c ]

soukjin bae reported a crash in tcp_v4_err() handling
ICMP_DEST_UNREACH after tcp_write_queue_head(sk)
returned a NULL pointer.

Current logic should have prevented this :

  if (seq != tp->snd_una  || !icsk->icsk_retransmits ||
      !icsk->icsk_backoff || fastopen)
      break;

Problem is the write queue might have been purged
and icsk_backoff has not been cleared.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: Add header for usage of fls64()
David S. Miller [Sat, 16 Feb 2019 21:44:39 +0000 (13:44 -0800)]
net: Add header for usage of fls64()

[ Upstream commit 8681ef1f3d295bd3600315325f3b3396d76d02f6 ]

Fixes: 3b89ea9c5902 ("net: Fix for_each_netdev_feature on Big endian")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agovxlan: test dev->flags & IFF_UP before calling netif_rx()
Eric Dumazet [Thu, 7 Feb 2019 20:27:38 +0000 (12:27 -0800)]
vxlan: test dev->flags & IFF_UP before calling netif_rx()

[ Upstream commit 4179cb5a4c924cd233eaadd081882425bc98f44e ]

netif_rx() must be called under a strict contract.

At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.

Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP

Virtual drivers do not have this guarantee, and must
therefore make the check themselves.

Otherwise we risk use-after-free and/or crashes.

Note this patch also fixes a small issue that came
with commit ce6502a8f957 ("vxlan: fix a use after free
in vxlan_encap_bypass"), since the dev->stats.rx_dropped
change was done on the wrong device.

Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Fixes: ce6502a8f957 ("vxlan: fix a use after free in vxlan_encap_bypass")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Petr Machata <petrm@mellanox.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agovsock: cope with memory allocation failure at socket creation time
Paolo Abeni [Thu, 7 Feb 2019 13:13:18 +0000 (14:13 +0100)]
vsock: cope with memory allocation failure at socket creation time

[ Upstream commit 225d9464268599a5b4d094d02ec17808e44c7553 ]

In the unlikely event that the kmalloc call in vmci_transport_socket_init()
fails, we end-up calling vmci_transport_destruct() with a NULL vmci_trans()
and oopsing.

This change addresses the above explicitly checking for zero vmci_trans()
at destruction time.

Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agovhost: correctly check the return value of translate_desc() in log_used()
Jason Wang [Tue, 19 Feb 2019 06:53:44 +0000 (14:53 +0800)]
vhost: correctly check the return value of translate_desc() in log_used()

[ Upstream commit 816db7663565cd23f74ed3d5c9240522e3fb0dda ]

When fail, translate_desc() returns negative value, otherwise the
number of iovs. So we should fail when the return value is negative
instead of a blindly check against zero.

Detected by CoverityScan, CID# 1442593:  Control flow issues  (DEADCODE)

Fixes: cc5e71075947 ("vhost: log dirty page correctly")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agosky2: Increase D3 delay again
Kai-Heng Feng [Tue, 19 Feb 2019 15:45:29 +0000 (23:45 +0800)]
sky2: Increase D3 delay again

[ Upstream commit 1765f5dcd00963e33f1b8a4e0f34061fbc0e2f7f ]

Another platform requires even longer delay to make the device work
correctly after S3.

So increase the delay to 300ms.

BugLink: https://bugs.launchpad.net/bugs/1798921
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: stmmac: handle endianness in dwmac4_get_timestamp
Alexandre Torgue [Fri, 15 Feb 2019 09:49:09 +0000 (10:49 +0100)]
net: stmmac: handle endianness in dwmac4_get_timestamp

[ Upstream commit 224babd62d6f19581757a6d8bae3bf9501fc10de ]

GMAC IP is little-endian and used on several kind of CPU (big or little
endian). Main callbacks functions of the stmmac drivers take care about
it. It was not the case for dwmac4_get_timestamp function.

Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4")
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: stmmac: Fix a race in EEE enable callback
Jose Abreu [Mon, 18 Feb 2019 13:35:03 +0000 (14:35 +0100)]
net: stmmac: Fix a race in EEE enable callback

[ Upstream commit 8a7493e58ad688eb23b81e45461c5d314f4402f1 ]

We are saving the status of EEE even before we try to enable it. This
leads to a race with XMIT function that tries to arm EEE timer before we
set it up.

Fix this by only saving the EEE parameters after all operations are
performed with success.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Fixes: d765955d2ae0 ("stmmac: add the Energy Efficient Ethernet support")
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: phy: xgmiitorgmii: Support generic PHY status read
Paul Kocialkowski [Fri, 15 Feb 2019 16:17:08 +0000 (17:17 +0100)]
net: phy: xgmiitorgmii: Support generic PHY status read

[ Upstream commit 197f9ab7f08ce4b9ece662f747c3991b2f0fbb57 ]

Some PHY drivers like the generic one do not provide a read_status
callback on their own but rely on genphy_read_status being called
directly.

With the current code, this results in a NULL function pointer call.
Call genphy_read_status instead when there is no specific callback.

Fixes: f411a6160bd4 ("net: phy: Add gmiitorgmii converter support")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: ipv4: use a dedicated counter for icmp_v4 redirect packets
Lorenzo Bianconi [Wed, 6 Feb 2019 18:18:04 +0000 (19:18 +0100)]
net: ipv4: use a dedicated counter for icmp_v4 redirect packets

[ Upstream commit c09551c6ff7fe16a79a42133bcecba5fc2fc3291 ]

According to the algorithm described in the comment block at the
beginning of ip_rt_send_redirect, the host should try to send
'ip_rt_redirect_number' ICMP redirect packets with an exponential
backoff and then stop sending them at all assuming that the destination
ignores redirects.
If the device has previously sent some ICMP error packets that are
rate-limited (e.g TTL expired) and continues to receive traffic,
the redirect packets will never be transmitted. This happens since
peer->rate_tokens will be typically greater than 'ip_rt_redirect_number'
and so it will never be reset even if the redirect silence timeout
(ip_rt_redirect_silence) has elapsed without receiving any packet
requiring redirects.

Fix it by using a dedicated counter for the number of ICMP redirect
packets that has been sent by the host

I have not been able to identify a given commit that introduced the
issue since ip_rt_send_redirect implements the same rate-limiting
algorithm from commit 1da177e4c3f4 ("Linux-2.6.12-rc2")

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: ip6_gre: initialize erspan_ver just for erspan tunnels
Lorenzo Bianconi [Fri, 15 Feb 2019 14:10:32 +0000 (15:10 +0100)]
net: ip6_gre: initialize erspan_ver just for erspan tunnels

[ Upstream commit 4974d5f678abb34401558559d47e2ea3d1c15cba ]

After commit c706863bc890 ("net: ip6_gre: always reports o_key to
userspace"), ip6gre and ip6gretap tunnels started reporting TUNNEL_KEY
output flag even if it is not configured.
ip6gre_fill_info checks erspan_ver value to add TUNNEL_KEY for
erspan tunnels, however in commit 84581bdae9587 ("erspan: set
erspan_ver to 1 by default when adding an erspan dev")
erspan_ver is initialized to 1 even for ip6gre or ip6gretap
Fix the issue moving erspan_ver initialization in a dedicated routine

Fixes: c706863bc890 ("net: ip6_gre: always reports o_key to userspace")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: fix IPv6 prefix route residue
Zhiqiang Liu [Mon, 11 Feb 2019 02:57:46 +0000 (10:57 +0800)]
net: fix IPv6 prefix route residue

[ Upstream commit e75913c93f7cd5f338ab373c34c93a655bd309cb ]

Follow those steps:
 # ip addr add 2001:123::1/32 dev eth0
 # ip addr add 2001:123:456::2/64 dev eth0
 # ip addr del 2001:123::1/32 dev eth0
 # ip addr del 2001:123:456::2/64 dev eth0
and then prefix route of 2001:123::1/32 will still exist.

This is because ipv6_prefix_equal in check_cleanup_prefix_route
func does not check whether two IPv6 addresses have the same
prefix length. If the prefix of one address starts with another
shorter address prefix, even though their prefix lengths are
different, the return value of ipv6_prefix_equal is true.

Here I add a check of whether two addresses have the same prefix
to decide whether their prefixes are equal.

Fixes: 5b84efecb7d9 ("ipv6 addrconf: don't cleanup prefix route for IFA_F_NOPREFIXROUTE")
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reported-by: Wenhao Zhang <zhangwenhao8@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: Fix for_each_netdev_feature on Big endian
Hauke Mehrtens [Fri, 15 Feb 2019 16:58:54 +0000 (17:58 +0100)]
net: Fix for_each_netdev_feature on Big endian

[ Upstream commit 3b89ea9c5902acccdbbdec307c85edd1bf52515e ]

The features attribute is of type u64 and stored in the native endianes on
the system. The for_each_set_bit() macro takes a pointer to a 32 bit array
and goes over the bits in this area. On little Endian systems this also
works with an u64 as the most significant bit is on the highest address,
but on big endian the words are swapped. When we expect bit 15 here we get
bit 47 (15 + 32).

This patch converts it more or less to its own for_each_set_bit()
implementation which works on 64 bit integers directly. This is then
completely in host endianness and should work like expected.

Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agonet: crypto set sk to NULL when af_alg_release.
Mao Wenan [Mon, 18 Feb 2019 02:44:44 +0000 (10:44 +0800)]
net: crypto set sk to NULL when af_alg_release.

[ Upstream commit 9060cb719e61b685ec0102574e10337fa5f445ea ]

KASAN has found use-after-free in sockfs_setattr.
The existed commit 6d8c50dcb029 ("socket: close race condition between sock_close()
and sockfs_setattr()") is to fix this simillar issue, but it seems to ignore
that crypto module forgets to set the sk to NULL after af_alg_release.

KASAN report details as below:
BUG: KASAN: use-after-free in sockfs_setattr+0x120/0x150
Write of size 4 at addr ffff88837b956128 by task syz-executor0/4186

CPU: 2 PID: 4186 Comm: syz-executor0 Not tainted xxx + #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.10.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0xca/0x13e
 print_address_description+0x79/0x330
 ? vprintk_func+0x5e/0xf0
 kasan_report+0x18a/0x2e0
 ? sockfs_setattr+0x120/0x150
 sockfs_setattr+0x120/0x150
 ? sock_register+0x2d0/0x2d0
 notify_change+0x90c/0xd40
 ? chown_common+0x2ef/0x510
 chown_common+0x2ef/0x510
 ? chmod_common+0x3b0/0x3b0
 ? __lock_is_held+0xbc/0x160
 ? __sb_start_write+0x13d/0x2b0
 ? __mnt_want_write+0x19a/0x250
 do_fchownat+0x15c/0x190
 ? __ia32_sys_chmod+0x80/0x80
 ? trace_hardirqs_on_thunk+0x1a/0x1c
 __x64_sys_fchownat+0xbf/0x160
 ? lockdep_hardirqs_on+0x39a/0x5e0
 do_syscall_64+0xc8/0x580
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462589
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89
f7 48 89 d6 48 89
ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3
48 c7 c1 bc ff ff
ff f7 d8 64 89 01 48
RSP: 002b:00007fb4b2c83c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000104
RAX: ffffffffffffffda RBX: 000000000072bfa0 RCX: 0000000000462589
RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000007
RBP: 0000000000000005 R08: 0000000000001000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb4b2c846bc
R13: 00000000004bc733 R14: 00000000006f5138 R15: 00000000ffffffff

Allocated by task 4185:
 kasan_kmalloc+0xa0/0xd0
 __kmalloc+0x14a/0x350
 sk_prot_alloc+0xf6/0x290
 sk_alloc+0x3d/0xc00
 af_alg_accept+0x9e/0x670
 hash_accept+0x4a3/0x650
 __sys_accept4+0x306/0x5c0
 __x64_sys_accept4+0x98/0x100
 do_syscall_64+0xc8/0x580
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 4184:
 __kasan_slab_free+0x12e/0x180
 kfree+0xeb/0x2f0
 __sk_destruct+0x4e6/0x6a0
 sk_destruct+0x48/0x70
 __sk_free+0xa9/0x270
 sk_free+0x2a/0x30
 af_alg_release+0x5c/0x70
 __sock_release+0xd3/0x280
 sock_close+0x1a/0x20
 __fput+0x27f/0x7f0
 task_work_run+0x136/0x1b0
 exit_to_usermode_loop+0x1a7/0x1d0
 do_syscall_64+0x461/0x580
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Syzkaller reproducer:
r0 = perf_event_open(&(0x7f0000000000)={0x0, 0x70, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext}, 0x0, 0x0,
0xffffffffffffffff, 0x0)
r1 = socket$alg(0x26, 0x5, 0x0)
getrusage(0x0, 0x0)
bind(r1, &(0x7f00000001c0)=@alg={0x26, 'hash\x00', 0x0, 0x0,
'sha256-ssse3\x00'}, 0x80)
r2 = accept(r1, 0x0, 0x0)
r3 = accept4$unix(r2, 0x0, 0x0, 0x0)
r4 = dup3(r3, r0, 0x0)
fchownat(r4, &(0x7f00000000c0)='\x00', 0x0, 0x0, 0x1000)

Fixes: 6d8c50dcb029 ("socket: close race condition between sock_close() and sockfs_setattr()")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agomlxsw: __mlxsw_sp_port_headroom_set(): Fix a use of local variable
Petr Machata [Sun, 17 Feb 2019 07:18:41 +0000 (07:18 +0000)]
mlxsw: __mlxsw_sp_port_headroom_set(): Fix a use of local variable

[ Upstream commit 289460404f6947ef1c38e67d680be9a84161250b ]

The function-local variable "delay" enters the loop interpreted as delay
in bits. However, inside the loop it gets overwritten by the result of
mlxsw_sp_pg_buf_delay_get(), and thus leaves the loop as quantity in
cells. Thus on second and further loop iterations, the headroom for a
given priority is configured with a wrong size.

Fix by introducing a loop-local variable, delay_cells. Rename thres to
thres_cells for consistency.

Fixes: f417f04da589 ("mlxsw: spectrum: Refactor port buffer configuration")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agodsa: mv88e6xxx: Ensure all pending interrupts are handled prior to exit
John David Anglin [Mon, 11 Feb 2019 18:40:21 +0000 (13:40 -0500)]
dsa: mv88e6xxx: Ensure all pending interrupts are handled prior to exit

[ Upstream commit 7c0db24cc431e2196d98a5d5ddaa9088e2fcbfe5 ]

The GPIO interrupt controller on the espressobin board only supports edge interrupts.
If one enables the use of hardware interrupts in the device tree for the 88E6341, it is
possible to miss an edge.  When this happens, the INTn pin on the Marvell switch is
stuck low and no further interrupts occur.

I found after adding debug statements to mv88e6xxx_g1_irq_thread_work() that there is
a race in handling device interrupts (e.g. PHY link interrupts).  Some interrupts are
directly cleared by reading the Global 1 status register.  However, the device interrupt
flag, for example, is not cleared until all the unmasked SERDES and PHY ports are serviced.
This is done by reading the relevant SERDES and PHY status register.

The code only services interrupts whose status bit is set at the time of reading its status
register.  If an interrupt event occurs after its status is read and before all interrupts
are serviced, then this event will not be serviced and the INTn output pin will remain low.

This is not a problem with polling or level interrupts since the handler will be called
again to process the event.  However, it's a big problem when using level interrupts.

The fix presented here is to add a loop around the code servicing switch interrupts.  If
any pending interrupts remain after the current set has been handled, we loop and process
the new set.  If there are no pending interrupts after servicing, we are sure that INTn has
gone high and we will get an edge when a new event occurs.

Tested on espressobin board.

Fixes: dc30c35be720 ("net: dsa: mv88e6xxx: Implement interrupt support.")
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoaf_packet: fix raw sockets over 6in4 tunnel
Nicolas Dichtel [Thu, 17 Jan 2019 10:27:22 +0000 (11:27 +0100)]
af_packet: fix raw sockets over 6in4 tunnel

[ Upstream commit 88a8121dc1d3d0dbddd411b79ed236b6b6ea415c ]

Since commit cb9f1b783850, scapy (which uses an AF_PACKET socket in
SOCK_RAW mode) is unable to send a basic icmp packet over a sit tunnel:

Here is a example of the setup:
$ ip link set ntfp2 up
$ ip addr add 10.125.0.1/24 dev ntfp2
$ ip tunnel add tun1 mode sit ttl 64 local 10.125.0.1 remote 10.125.0.2 dev ntfp2
$ ip addr add fd00:cafe:cafe::1/128 dev tun1
$ ip link set dev tun1 up
$ ip route add fd00:200::/64 dev tun1
$ scapy
>>> p = []
>>> p += IPv6(src='fd00:100::1', dst='fd00:200::1')/ICMPv6EchoRequest()
>>> send(p, count=1, inter=0.1)
>>> quit()
$ ip -s link ls dev tun1 | grep -A1 "TX.*errors"
    TX: bytes  packets  errors  dropped carrier collsns
    0          0        1       0       0       0

The problem is that the network offset is set to the hard_header_len of the
output device (tun1, ie 14 + 20) and in our case, because the packet is
small (48 bytes) the pskb_inet_may_pull() fails (it tries to pull 40 bytes
(ipv6 header) starting from the network offset).

This problem is more generally related to device with variable hard header
length. To avoid a too intrusive patch in the current release, a (ugly)
workaround is proposed in this patch. It has to be cleaned up in net-next.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=993675a3100b1
Link: http://patchwork.ozlabs.org/patch/1024489/
Fixes: cb9f1b783850 ("ip: validate header length on virtual device xmit")
CC: Willem de Bruijn <willemb@google.com>
CC: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5 years agoLinux 4.19.24 v4.19.24
Greg Kroah-Hartman [Wed, 20 Feb 2019 09:25:50 +0000 (10:25 +0100)]
Linux 4.19.24

5 years agomm: proc: smaps_rollup: fix pss_locked calculation
Sandeep Patil [Tue, 12 Feb 2019 23:36:11 +0000 (15:36 -0800)]
mm: proc: smaps_rollup: fix pss_locked calculation

commit 27dd768ed8db48beefc4d9e006c58e7a00342bde upstream.

The 'pss_locked' field of smaps_rollup was being calculated incorrectly.
It accumulated the current pss everytime a locked VMA was found.  Fix
that by adding to 'pss_locked' the same time as that of 'pss' if the vma
being walked is locked.

Link: http://lkml.kernel.org/r/20190203065425.14650-1-sspatil@android.com
Fixes: 493b0e9d945f ("mm: add /proc/pid/smaps_rollup")
Signed-off-by: Sandeep Patil <sspatil@android.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Daniel Colascione <dancol@google.com>
Cc: <stable@vger.kernel.org> [4.14.x, 4.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set
Joonas Lahtinen [Thu, 7 Feb 2019 08:54:53 +0000 (10:54 +0200)]
drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set

commit 2e7bd10e05afb866b5fb13eda25095c35d7a27cc upstream.

Make sure the underlying VMA in the process address space is the
same as it was during vm_mmap to avoid applying WC to wrong VMA.

A more long-term solution would be to have vm_mmap_locked variant
in linux/mmap.h for when caller wants to hold mmap_sem for an
extended duration.

v2:
- Refactor the compare function

Fixes: 1816f9236303 ("drm/i915: Support creation of unbound wc user mappings for objects")
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 5c4604e757ba9b193b09768d75a7d2105a5b883f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/i915: Block fbdev HPD processing during suspend
Lyude Paul [Tue, 29 Jan 2019 19:09:59 +0000 (14:09 -0500)]
drm/i915: Block fbdev HPD processing during suspend

commit e8a8fedd57fdcebf0e4f24ef0fc7e29323df8e66 upstream.

When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.

However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.

This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.

(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).

We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.

This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.

Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
  (Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
  intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39ceed6 ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
(cherry picked from commit fe5ec65668cdaa4348631d8ce1766eed43b33c10)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm/vkms: Fix license inconsistent
Rodrigo Siqueira [Wed, 6 Feb 2019 14:01:16 +0000 (12:01 -0200)]
drm/vkms: Fix license inconsistent

commit 7fd56e0260a22c0cfaf9adb94a2427b76e239dd0 upstream.

Fixes license inconsistent related to the VKMS driver and remove the
redundant boilerplate comment.

Fixes: 854502fa0a38 ("drm/vkms: Add basic CRTC initialization")

Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206140116.7qvy2lpwbcd7wds6@smtp.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodrm: Use array_size() when creating lease
Matthew Wilcox [Thu, 14 Feb 2019 19:03:48 +0000 (11:03 -0800)]
drm: Use array_size() when creating lease

commit 69ef943dbc14b21987c79f8399ffea08f9a1b446 upstream.

Passing an object_count of sufficient size will make
object_count * 4 wrap around to be very small, then a later function
will happily iterate off the end of the object_ids array.  Using
array_size() will saturate at SIZE_MAX, the kmalloc() will fail and
we'll return an -ENOMEM to the norty userspace.

Fixes: 62884cd386b8 ("drm: Add four ioctls for managing drm mode object leases [v7]")
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodm thin: fix bug where bio that overwrites thin block ignores FUA
Nikos Tsironis [Thu, 14 Feb 2019 18:38:47 +0000 (20:38 +0200)]
dm thin: fix bug where bio that overwrites thin block ignores FUA

commit 4ae280b4ee3463fa57bbe6eede26b97daff8a0f1 upstream.

When provisioning a new data block for a virtual block, either because
the block was previously unallocated or because we are breaking sharing,
if the whole block of data is being overwritten the bio that triggered
the provisioning is issued immediately, skipping copying or zeroing of
the data block.

When this bio completes the new mapping is inserted in to the pool's
metadata by process_prepared_mapping(), where the bio completion is
signaled to the upper layers.

This completion is signaled without first committing the metadata.  If
the bio in question has the REQ_FUA flag set and the system crashes
right after its completion and before the next metadata commit, then the
write is lost despite the REQ_FUA flag requiring that I/O completion for
this request must only be signaled after the data has been committed to
non-volatile storage.

Fix this by deferring the completion of overwrite bios, with the REQ_FUA
flag set, until after the metadata has been committed.

Cc: stable@vger.kernel.org
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agodm crypt: don't overallocate the integrity tag space
Mikulas Patocka [Fri, 8 Feb 2019 15:52:07 +0000 (10:52 -0500)]
dm crypt: don't overallocate the integrity tag space

commit ff0c129d3b5ecb3df7c8f5e2236582bf745b6c5f upstream.

bio_sectors() returns the value in the units of 512-byte sectors (no
matter what the real sector size of the device).  dm-crypt multiplies
bio_sectors() by on_disk_tag_size to calculate the space allocated for
integrity tags.  If dm-crypt is running with sector size larger than
512b, it allocates more data than is needed.

Device Mapper trims the extra space when passing the bio to
dm-integrity, so this bug didn't result in any visible misbehavior.
But it must be fixed to avoid wasteful memory allocation for the block
integrity payload.

Fixes: ef43aa38063a6 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Cc: stable@vger.kernel.org # 4.12+
Reported-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agox86/a.out: Clear the dump structure initially
Borislav Petkov [Tue, 12 Feb 2019 13:28:03 +0000 (14:28 +0100)]
x86/a.out: Clear the dump structure initially

commit 10970e1b4be9c74fce8ab6e3c34a7d718f063f2c upstream.

dump_thread32() in aout_core_dump() does not clear the user32 structure
allocated on the stack as the first thing on function entry.

As a result, the dump.u_comm, dump.u_ar0 and dump.signal which get
assigned before the clearing, get overwritten.

Rename that function to fill_dump() to make it clear what it does and
call it first thing.

This was caught while staring at a patch by Derek Robson
<robsonde@gmail.com>.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Derek Robson <robsonde@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Matz <matz@suse.de>
Cc: x86@kernel.org
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190202005512.3144-1-robsonde@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agomd/raid1: don't clear bitmap bits on interrupted recovery.
Nate Dailey [Thu, 7 Feb 2019 19:19:01 +0000 (14:19 -0500)]
md/raid1: don't clear bitmap bits on interrupted recovery.

commit dfcc34c99f3ebc16b787b118763bf9cb6b1efc7a upstream.

sync_request_write no longer submits writes to a Faulty device. This has
the unfortunate side effect that bitmap bits can be incorrectly cleared
if a recovery is interrupted (previously, end_sync_write would have
prevented this). This means the next recovery may not copy everything
it should, potentially corrupting data.

Add a function for doing the proper md_bitmap_end_sync, called from
end_sync_write and the Faulty case in sync_request_write.

backport note to 4.14: s/md_bitmap_end_sync/bitmap_end_sync
Cc: stable@vger.kernel.org 4.14+
Fixes: 0c9d5b127f69 ("md/raid1: avoid reusing a resync bio after error handling.")
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Tested-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Nate Dailey <nate.dailey@stratus.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agosignal: Restore the stop PTRACE_EVENT_EXIT
Eric W. Biederman [Tue, 12 Feb 2019 05:27:42 +0000 (23:27 -0600)]
signal: Restore the stop PTRACE_EVENT_EXIT

commit cf43a757fd49442bc38f76088b70c2299eed2c2f upstream.

In the middle of do_exit() there is there is a call
"ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process
in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for
for the debugger to release the task or SIGKILL to be delivered.

Skipping past dequeue_signal when we know a fatal signal has already
been delivered resulted in SIGKILL remaining pending and
TIF_SIGPENDING remaining set.  This in turn caused the
scheduler to not sleep in PTACE_EVENT_EXIT as it figured
a fatal signal was pending.  This also caused ptrace_freeze_traced
in ptrace_check_attach to fail because it left a per thread
SIGKILL pending which is what fatal_signal_pending tests for.

This difference in signal state caused strace to report
strace: Exit of unknown pid NNNNN ignored

Therefore update the signal handling state like dequeue_signal
would when removing a per thread SIGKILL, by removing SIGKILL
from the per thread signal mask and clearing TIF_SIGPENDING.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Ivan Delalande <colona@arista.com>
Cc: stable@vger.kernel.org
Fixes: 35634ffa1751 ("signal: Always notice exiting tasks")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoscsi: sd: fix entropy gathering for most rotational disks
James Bottomley [Tue, 12 Feb 2019 16:05:25 +0000 (08:05 -0800)]
scsi: sd: fix entropy gathering for most rotational disks

commit e4a056987c86f402f1286e050b1dee3f4ce7c7eb upstream.

The problem is that the default for MQ is not to gather entropy, whereas
the default for the legacy queue was always to gather it.  The original
attempt to fix entropy gathering for rotational disks under MQ added an
else branch in sd_read_block_characteristics().  Unfortunately, the entire
check isn't reached if the device has no characteristics VPD page.  Since
this page was only introduced in SBC-3 and its optional anyway, most less
expensive rotational disks don't have one, meaning they all stopped
gathering entropy when we made MQ the default.  In a wholly unrelated
change, openssl and openssh won't function until the random number
generator is initialised, meaning lots of people have been seeing large
delays before they could log into systems with default MQ kernels due to
this lack of entropy, because it now can take tens of minutes to initialise
the kernel random number generator.

The fix is to set the non-rotational and add-randomness flags
unconditionally early on in the disk initialization path, so they can be
reset only if the device actually reports being non-rotational via the VPD
page.

Reported-by: Mikael Pettersson <mikpelinux@gmail.com>
Fixes: 83e32a591077 ("scsi: sd: Contribute to randomness when running rotational device")
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Xuewei Zhang <xueweiz@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agox86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
Hedi Berriche [Wed, 13 Feb 2019 19:34:13 +0000 (19:34 +0000)]
x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls

commit f331e766c4be33f4338574f3c9f7f77e98ab4571 upstream.

Calls into UV firmware must be protected against concurrency, expose the
efi_runtime_lock to the UV platform, and use it to serialise UV BIOS
calls.

Signed-off-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Russ Anderson <rja@hpe.com>
Reviewed-by: Dimitri Sivanich <sivanich@hpe.com>
Reviewed-by: Mike Travis <mike.travis@hpe.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: stable@vger.kernel.org # v4.9+
Cc: Steve Wahl <steve.wahl@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190213193413.25560-5-hedi.berriche@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agotracing/uprobes: Fix output for multiple string arguments
Andreas Ziegler [Wed, 16 Jan 2019 14:16:29 +0000 (15:16 +0100)]
tracing/uprobes: Fix output for multiple string arguments

commit 0722069a5374b904ec1a67f91249f90e1cfae259 upstream.

When printing multiple uprobe arguments as strings the output for the
earlier arguments would also include all later string arguments.

This is best explained in an example:

Consider adding a uprobe to a function receiving two strings as
parameters which is at offset 0xa0 in strlib.so and we want to print
both parameters when the uprobe is hit (on x86_64):

$ echo 'p:func /lib/strlib.so:0xa0 +0(%di):string +0(%si):string' > \
    /sys/kernel/debug/tracing/uprobe_events

When the function is called as func("foo", "bar") and we hit the probe,
the trace file shows a line like the following:

  [...] func: (0x7f7e683706a0) arg1="foobar" arg2="bar"

Note the extra "bar" printed as part of arg1. This behaviour stacks up
for additional string arguments.

The strings are stored in a dynamically growing part of the uprobe
buffer by fetch_store_string() after copying them from userspace via
strncpy_from_user(). The return value of strncpy_from_user() is then
directly used as the required size for the string. However, this does
not take the terminating null byte into account as the documentation
for strncpy_from_user() cleary states that it "[...] returns the
length of the string (not including the trailing NUL)" even though the
null byte will be copied to the destination.

Therefore, subsequent calls to fetch_store_string() will overwrite
the terminating null byte of the most recently fetched string with
the first character of the current string, leading to the
"accumulation" of strings in earlier arguments in the output.

Fix this by incrementing the return value of strncpy_from_user() by
one if we did not hit the maximum buffer size.

Link: http://lkml.kernel.org/r/20190116141629.5752-1-andreas.ziegler@fau.de
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5baaa59ef09e ("tracing/probes: Implement 'memory' fetch method for uprobes")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agos390/zcrypt: fix specification exception on z196 during ap probe
Harald Freudenberger [Wed, 23 Jan 2019 12:41:35 +0000 (13:41 +0100)]
s390/zcrypt: fix specification exception on z196 during ap probe

commit 8f9aca0c45322a807a343fc32f95f2500f83b9ae upstream.

The older machines don't have the QCI instruction available.
With support for up to 256 crypto cards the probing of each
card has been extended to check card ids from 0 up to 255.
For machines with QCI support there is a filter limiting the
range of probed cards. The older machines (z196 and older)
don't have this filter and so since support for 256 cards is
in the driver all cards are probed. However, these machines
also require to have the card id fit into 6 bits. Exceeding
this limit results in a specification exception which happens
on every kernel startup even when there is no crypto configured
and used at all.

This fix limits the range of probed crypto cards to 64 if
there is no QCI instruction available to obey to the older
ap architecture and so fixes the specification exceptions
on z196 machines.

Cc: stable@vger.kernel.org # v4.17+
Fixes: af4a72276d49 ("s390/zcrypt: Support up to 256 crypto adapters.")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoalpha: Fix Eiger NR_IRQS to 128
Meelis Roos [Fri, 12 Oct 2018 09:27:51 +0000 (12:27 +0300)]
alpha: Fix Eiger NR_IRQS to 128

commit bfc913682464f45bc4d6044084e370f9048de9d5 upstream.

Eiger machine vector definition has nr_irqs 128, and working 2.6.26
boot shows SCSI getting IRQ-s 64 and 65. Current kernel boot fails
because Symbios SCSI fails to request IRQ-s and does not find the disks.
It has been broken at least since 3.18 - the earliest I could test with
my gcc-5.

The headers have moved around and possibly another order of defines has
worked in the past - but since 128 seems to be correct and used, fix
arch/alpha/include/asm/irq.h to have NR_IRQS=128 for Eiger.

This fixes 4.19-rc7 boot on my Force Flexor A264 (Eiger subarch).

Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoalpha: fix page fault handling for r16-r18 targets
Sergei Trofimovich [Mon, 31 Dec 2018 11:53:55 +0000 (11:53 +0000)]
alpha: fix page fault handling for r16-r18 targets

commit 491af60ffb848b59e82f7c9145833222e0bf27a5 upstream.

Fix page fault handling code to fixup r16-r18 registers.
Before the patch code had off-by-two registers bug.
This bug caused overwriting of ps,pc,gp registers instead
of fixing intended r16,r17,r18 (see `struct pt_regs`).

More details:

Initially Dmitry noticed a kernel bug as a failure
on strace test suite. Test passes unmapped userspace
pointer to io_submit:

```c
    #include <err.h>
    #include <unistd.h>
    #include <sys/mman.h>
    #include <asm/unistd.h>
    int main(void)
    {
        unsigned long ctx = 0;
        if (syscall(__NR_io_setup, 1, &ctx))
            err(1, "io_setup");
        const size_t page_size = sysconf(_SC_PAGESIZE);
        const size_t size = page_size * 2;
        void *ptr = mmap(NULL, size, PROT_READ | PROT_WRITE,
                         MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
        if (MAP_FAILED == ptr)
            err(1, "mmap(%zu)", size);
        if (munmap(ptr, size))
            err(1, "munmap");
        syscall(__NR_io_submit, ctx, 1, ptr + page_size);
        syscall(__NR_io_destroy, ctx);
        return 0;
    }
```

Running this test causes kernel to crash when handling page fault:

```
    Unable to handle kernel paging request at virtual address ffffffffffff9468
    CPU 3
    aio(26027): Oops 0
    pc = [<fffffc00004eddf8>]  ra = [<fffffc00004edd5c>]  ps = 0000    Not tainted
    pc is at sys_io_submit+0x108/0x200
    ra is at sys_io_submit+0x6c/0x200
    v0 = fffffc00c58e6300  t0 = fffffffffffffff2  t1 = 000002000025e000
    t2 = fffffc01f159fef8  t3 = fffffc0001009640  t4 = fffffc0000e0f6e0
    t5 = 0000020001002e9e  t6 = 4c41564e49452031  t7 = fffffc01f159c000
    s0 = 0000000000000002  s1 = 000002000025e000  s2 = 0000000000000000
    s3 = 0000000000000000  s4 = 0000000000000000  s5 = fffffffffffffff2
    s6 = fffffc00c58e6300
    a0 = fffffc00c58e6300  a1 = 0000000000000000  a2 = 000002000025e000
    a3 = 00000200001ac260  a4 = 00000200001ac1e8  a5 = 0000000000000001
    t8 = 0000000000000008  t9 = 000000011f8bce30  t10= 00000200001ac440
    t11= 0000000000000000  pv = fffffc00006fd320  at = 0000000000000000
    gp = 0000000000000000  sp = 00000000265fd174
    Disabling lock debugging due to kernel taint
    Trace:
    [<fffffc0000311404>] entSys+0xa4/0xc0
```

Here `gp` has invalid value. `gp is s overwritten by a fixup for the
following page fault handler in `io_submit` syscall handler:

```
    __se_sys_io_submit
    ...
        ldq     a1,0(t1)
        bne     t0,4280 <__se_sys_io_submit+0x180>
```

After a page fault `t0` should contain -EFALUT and `a1` is 0.
Instead `gp` was overwritten in place of `a1`.

This happens due to a off-by-two bug in `dpf_reg()` for `r16-r18`
(aka `a0-a2`).

I think the bug went unnoticed for a long time as `gp` is one
of scratch registers. Any kernel function call would re-calculate `gp`.

Dmitry tracked down the bug origin back to 2.1.32 kernel version
where trap_a{0,1,2} fields were inserted into struct pt_regs.
And even before that `dpf_reg()` contained off-by-one error.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reported-and-reviewed-by: "Dmitry V. Levin" <ldv@altlinux.org>
Cc: stable@vger.kernel.org # v2.1.32+
Bug: https://bugs.gentoo.org/672040
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoRevert "mm: slowly shrink slabs with a relatively small number of objects"
Dave Chinner [Tue, 12 Feb 2019 23:35:55 +0000 (15:35 -0800)]
Revert "mm: slowly shrink slabs with a relatively small number of objects"

commit a9a238e83fbb0df31c3b9b67003f8f9d1d1b6c96 upstream.

This reverts commit 172b06c32b9497 ("mm: slowly shrink slabs with a
relatively small number of objects").

This change changes the agressiveness of shrinker reclaim, causing small
cache and low priority reclaim to greatly increase scanning pressure on
small caches.  As a result, light memory pressure has a disproportionate
affect on small caches, and causes large caches to be reclaimed much
faster than previously.

As a result, it greatly perturbs the delicate balance of the VFS caches
(dentry/inode vs file page cache) such that the inode/dentry caches are
reclaimed much, much faster than the page cache and this drives us into
several other caching imbalance related problems.

As such, this is a bad change and needs to be reverted.

[ Needs some massaging to retain the later seekless shrinker
  modifications.]

Link: http://lkml.kernel.org/r/20190130041707.27750-3-david@fromorbit.com
Fixes: 172b06c32b9497 ("mm: slowly shrink slabs with a relatively small number of objects")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Wolfgang Walter <linux@stwm.de>
Cc: Roman Gushchin <guro@fb.com>
Cc: Spock <dairinin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoRevert "mm: don't reclaim inodes with many attached pages"
Dave Chinner [Tue, 12 Feb 2019 23:35:51 +0000 (15:35 -0800)]
Revert "mm: don't reclaim inodes with many attached pages"

commit 69056ee6a8a3d576ed31e38b3b14c70d6c74edcc upstream.

This reverts commit a76cf1a474d7d ("mm: don't reclaim inodes with many
attached pages").

This change causes serious changes to page cache and inode cache
behaviour and balance, resulting in major performance regressions when
combining worklaods such as large file copies and kernel compiles.

  https://bugzilla.kernel.org/show_bug.cgi?id=202441

This change is a hack to work around the problems introduced by changing
how agressive shrinkers are on small caches in commit 172b06c32b94 ("mm:
slowly shrink slabs with a relatively small number of objects").  It
creates more problems than it solves, wasn't adequately reviewed or
tested, so it needs to be reverted.

Link: http://lkml.kernel.org/r/20190130041707.27750-2-david@fromorbit.com
Fixes: a76cf1a474d7d ("mm: don't reclaim inodes with many attached pages")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Wolfgang Walter <linux@stwm.de>
Cc: Roman Gushchin <guro@fb.com>
Cc: Spock <dairinin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoRevert "nfsd4: return default lease period"
J. Bruce Fields [Thu, 14 Feb 2019 17:33:19 +0000 (12:33 -0500)]
Revert "nfsd4: return default lease period"

commit 3bf6b57ec2ec945e5a6edf5c202a754f1e852ecd upstream.

This reverts commit d6ebf5088f09472c1136cd506bdc27034a6763f8.

I forgot that the kernel's default lease period should never be
decreased!

After a kernel upgrade, the kernel has no way of knowing on its own what
the previous lease time was.  Unless userspace tells it otherwise, it
will assume the previous lease period was the same.

So if we decrease this value in a kernel upgrade, we end up enforcing a
grace period that's too short, and clients will fail to reclaim state in
time.  Symptoms may include EIO and log messages like "NFS:
nfs4_reclaim_open_state: Lock reclaim failed!"

There was no real justification for the lease period decrease anyway.

Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Fixes: d6ebf5088f09 "nfsd4: return default lease period"
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoInput: elantech - enable 3rd button support on Fujitsu CELSIUS H780
Matti Kurkela [Fri, 8 Feb 2019 07:49:23 +0000 (23:49 -0800)]
Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780

commit e8b22d0a329f0fb5c7ef95406872d268f01ee3b1 upstream.

Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech
touchpad, but the driver needs to be told so to enable the middle touchpad
button.

The elantech_dmi_force_crc_enabled quirk was not necessary with the H780.

Also document the fw_version and caps values detected for both H760 and
H780 models.

Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agoInput: bma150 - register input device after setting private data
Jonathan Bakker [Wed, 6 Feb 2019 18:45:37 +0000 (10:45 -0800)]
Input: bma150 - register input device after setting private data

commit 90cc55f067f6ca0e64e5e52883ece47d8af7b67b upstream.

Otherwise we introduce a race condition where userspace can request input
before we're ready leading to null pointer dereference such as

input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3
Unable to handle kernel NULL pointer dereference at virtual address 00000018
pgd = (ptrval)
[00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] PREEMPT ARM
Modules linked in: bma150 input_polldev [last unloaded: bma150]
CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46
Hardware name: Samsung S5PC110/S5PV210-based board
PC is at input_event+0x8/0x60
LR is at bma150_report_xyz+0x9c/0xe0 [bma150]
pc : [<80450f70>]    lr : [<7f0a614c>]    psr: 800d0013
sp : a4c1fd78  ip : 00000081  fp : 00020000
r10: 00000000  r9 : a5e2944c  r8 : a7455000
r7 : 00000016  r6 : 00000101  r5 : a7617940  r4 : 80909048
r3 : fffffff2  r2 : 00000000  r1 : 00000003  r0 : 00000000
Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 54e34019  DAC: 00000051
Process accelerometer (pid: 2870, stack limit = 0x(ptrval))
Stackck: (0xa4c1fd78 to 0xa4c20000)
fd60:                                                       fffffff3 fc813f6c
fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324
fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10
fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0
fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c
fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000
fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041
fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8
fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001
fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048
fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8
fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720
fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00
ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3
ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002
ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c
ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100
ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000
ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000
ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038
ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000
[<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c)
Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018)
---[ end trace 1c691ee85f2ff243 ]---

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agommc: block: handle complete_work on separate workqueue
Zachary Hays [Thu, 7 Feb 2019 15:03:08 +0000 (10:03 -0500)]
mmc: block: handle complete_work on separate workqueue

commit dcf6e2e38a1c7ccbc535de5e1d9b14998847499d upstream.

The kblockd workqueue is created with the WQ_MEM_RECLAIM flag set.
This generates a rescuer thread for that queue that will trigger when
the CPU is under heavy load and collect the uncompleted work.

In the case of mmc, this creates the possibility of a deadlock when
there are multiple partitions on the device as other blk-mq work is
also run on the same queue. For example:

- worker 0 claims the mmc host to work on partition 1
- worker 1 attempts to claim the host for partition 2 but has to wait
  for worker 0 to finish
- worker 0 schedules complete_work to release the host
- rescuer thread is triggered after time-out and collects the dangling
  work
- rescuer thread attempts to complete the work in order starting with
  claim host
- the task to release host is now blocked by a task to claim it and
  will never be called

The above results in multiple hung tasks that lead to failures to
mount partitions.

Handling complete_work on a separate workqueue avoids this by keeping
the work completion tasks separate from the other blk-mq work. This
allows the host to be released without getting blocked by other tasks
attempting to claim the host.

Signed-off-by: Zachary Hays <zhays@lexmark.com>
Fixes: 81196976ed94 ("mmc: block: Add blk-mq support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agommc: sunxi: Filter out unsupported modes declared in the device tree
Chen-Yu Tsai [Tue, 5 Feb 2019 15:42:24 +0000 (23:42 +0800)]
mmc: sunxi: Filter out unsupported modes declared in the device tree

commit d6f11e7d91f2ac85f66194fe3ef8789b49901d64 upstream.

The MMC device tree bindings include properties used to signal various
signalling speed modes. Until now the sunxi driver was accepting them
without any further filtering, while the sunxi device trees were not
actually using them.

Since some of the H5 boards can not run at higher speed modes stably,
we are resorting to declaring the higher speed modes per-board.

Regardless, having boards declare modes and blindly following them,
even without proper support in the driver, is generally a bad thing.

Filter out all unsupported modes from the capabilities mask after
the device tree properties have been parsed.

Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 years agokvm: vmx: Fix entry number check for add_atomic_switch_msr()
Xiaoyao Li [Thu, 14 Feb 2019 04:08:58 +0000 (12:08 +0800)]
kvm: vmx: Fix entry number check for add_atomic_switch_msr()

commit 98ae70cc476e833332a2c6bb72f941a25f0de226 upstream.

Commit ca83b4a7f2d068da79a0 ("x86/KVM/VMX: Add find_msr() helper function")
introduces the helper function find_msr(), which returns -ENOENT when
not find the msr in vmx->msr_autoload.guest/host. Correct checking contion
of no more available entry in vmx->msr_autoload.

Fixes: ca83b4a7f2d0 ("x86/KVM/VMX: Add find_msr() helper function")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>