* objdump.c: Include sys/mman.h
  (print_file_list): Remove f, add map, mapsize, linemap, maxline, last_line, first fields.
  (slurp_file): Add.
  (index_file): Add.
  (print_file_open): Call slurp_file and index_file. Initialize new fields.
  (skip_to_line): Rename to print_line and write only single line.
  (dump_line): Add.
  (show_line): Change to new algorithm.

2007-06-18  H.J. Lu  <hongjiu.lu@intel.com>

* libpei.h (_bfd_XXi_final_link_postscript): Remove
duplication.
(bfd_target_pei_p): New.
(bfd_target_pei_arch): New
(bfd_target_efi_p): Likewise.
(bfd_target_efi_arch): New
(bfd_pe_executable_p): Use bfd_target_pei_p and
bfd_target_efi_p.

* peicode.h (arch_type): New enum.
(pe_arch): New function.
(pe_bfd_object_p): Don't match PE/EFI target with EFI/PE file
if there is an EFI/PE target.

opcodes/
* m68k-opc.c (m68k_opcodes): Add wdebugl variants.

gas/testsuite/
* gas/m68k/all.exp: Run mcf-wdebug.
* gas/testsuite/gas/m68k/mcf-wdebug.d,
gas/testsuite/gas/m68k/mcf-wdebug.s: New.

* resres.c (probe_binary): Fix test for badly formatted headers.

* coffread.c (coff_sym_fns): Add default_symfile_segments.
* dbxread.c (start_psymtab): Check HAVE_ELF.
(aout_sym_fns): Likewise.
* elfread.c (elf_symfile_segments): New.
(elf_sym_fns): Add elf_symfile_segments.
* mipsread.c (ecoff_sym_fns): Add default_symfile_segments.
* remote.c (get_offsets): Use symfile_map_offsets_to_segments.
Skip if there is no symfile_objfile.  Handle TextSeg and DataSeg.
* somread.c (som_sym_fns): Use default_symfile_segments.
* symfile.c (find_sym_fns): Take a BFD and return the sym_fns.
(init_objfile_sect_indices): Call symfile_find_segment_sections.
(default_symfile_segments): New function.
(syms_from_objfile): Update call to find_sym_fns.
(symfile_get_segment_data, free_symfile_segment_data): New.
(symfile_map_offsets_to_segments): New.
(symfile_find_segment_sections): New.
* symfile.h (struct symfile_segment_data): New.
(struct sym_fns): Add sym_segments.
(default_symfile_segments, symfile_get_segment_data)
(free_symfile_segment_data): New prototypes.
(symfile_map_offsets_to_segments): Likewise.
* xcoffread.c (xcoff_sym_fns): Add default_symfile_segments.
* Makefile.in (COMMON_OBS): Remove elfread.o.
(elf_internal_h): New.
(elfread.o): Update.
* configure.ac: Add elfread.o to COMMON_OBS if bfd/elf.o was
compiled.
* config.in, configure: Regenerated.
* NEWS: Mention qOffsets changes.

* gdb.texinfo (General Query Packets): Document qOffsets changes.

* Makefile.def: Add dependency from configure-gdb to all-bfd.
* Makefile.in: Regenerated.

* rclex.c: (cpp_line): Add code_page pragma support.
* windres.c: (usage, long_options, main): Add new option --codepage or -c.
* winduni.c: (wind_default_codepage, wind_current_codepage): New.
  (unicode_from_ascii, ascii_from_unicode): Use wind_current_codepage as codepage parameter.
  (unicode_print): Print 4 characters for hexadecimal values in unicode strings.
* winduni.h:  (wind_default_codepage, wind_current_codepage): Export.
* doc/binutils.texi: Document new option.
* NEWS: Mention new feature.

* ldlex.l, ldgram.y: Add ALIGNOF.
* ldexp.c (exp_print_token, foldname): Likewise.
* ld.texinfo: Likewise.
: ----------------------------------------------------------------------

* ldlex.l, ldgram.y: Add ALIGNOF.
* ldexp.c (exp_print_token, foldname): Likewise.
* ld.texinfo: Likewise.

ld/testsuite/
* ld-scripts/alignof.s: New.
* ld-scripts/alignof.t: New
* ld-scripts/alignof.exp: New.

* Makefile.am: Add eelf32_spu.o rule.
* Makefile.in: Regenerate.
* emultempl/spuelf.em: Revert last change.  Instead use EMBEDSPU
defined in Makefile for embedspu name.

* emultempl/spuelf.em (embedded_spu_file): Deduce embedspu program
name prefix from that of ld.

* embedspu.sh: Parse _SPUEAR_ symbol values as hex.

daily update

*** empty log message ***

daily update

*** empty log message ***

* gdbtypes.h (builtin_type_m2_char, builtin_type_m2_int,
builtin_type_m2_card, builtin_type_m2_real, builtin_type_m2_bool):
Replace global variable declaration with compatibility macro.
(struct builtin_m2_type): New data type.
(builtin_m2_type): Add prototype.
* m2-lang.c (builtin_type_m2_char, builtin_type_m2_int,
builtin_type_m2_card, builtin_type_m2_real, builtin_type_m2_bool):
Remove global variables.
(m2_language_arch_info): Use builtin_m2_type instead of variables.
(build_m2_types): New function.
(m2_type_data): New variable.
(builtin_m2_type): New function.
(_initialize_m2_language): Do not build data types.  Register
m2_type_data per-gdbarch data.

* gdbtypes.h (builtin_type_f_character, builtin_type_f_logical,
builtin_type_f_logical_s1, builtin_type_f_logical_s2,
builtin_type_f_integer, builtin_type_f_integer_s2, builtin_type_f_real,
builtin_type_f_real_s8, builtin_type_f_real_s16,
builtin_type_f_complex_s8, builtin_type_f_complex_s16,
builtin_type_f_complex_s32, builtin_type_f_void): Replace global
variable declaration with compatibility macro.
(struct builtin_f_type): New data type.
(builtin_f_type): Add prototype.
* f-lang.c (builtin_type_f_character, builtin_type_f_logical,
builtin_type_f_logical_s1, builtin_type_f_logical_s2,
builtin_type_f_integer, builtin_type_f_integer_s2, builtin_type_f_real,
builtin_type_f_real_s8, builtin_type_f_real_s16,
builtin_type_f_complex_s8, builtin_type_f_complex_s16,
builtin_type_f_complex_s32, builtin_type_f_void): Remove variables.
(f_language_arch_info): Use builtin_f_type instead of variables.
(build_fortran_types): Build builtin_f_type structure instead of
setting global type variables.
(f_type_data): New variable.
(builtin_f_type): New function.
(_initialize_f_language): Do not call build_fortran_types.  Do not
swap global type variables.  Register f_type_data per-gdbarch data.

* f-lang.c (_initialize_f_language): Do not initialize or
swap builtin_type_string.

* std-regs.c (builtin_type_frame_reg, build_builtin_type_frame_reg,
value_of_builtin_frame_reg): Remove.
(_initialize_frame_reg): Do not swap builtin_type_frame_reg.  Remove
inactive call to value_of_builtin_frame_reg.

* gdbarch.sh (bfd_vma): Remove.
* gdbarch.c, gdbarch.h: Regenerate.

* gdbtypes.h (builtin_bfd_vma_type): Remove.
* gdbtypes.h (builtin_bfd_vma_type): Remove.
(build_gdbtypes): Do not initialize it.
(_initialize_gdbtypes): Do not swap it.

* gdbtypes.c (builtin_type_v2_double, builtin_type_v4_float,
builtin_type_v2_int64, builtin_type_v4_int32, builtin_type_v8_int16,
builtin_type_v16_int8, builtin_type_v2_float, builtin_type_v2_int32,
builtin_type_v4_int16, builtin_type_v8_int8, builtin_type_v4sf,
builtin_type_v4si, builtin_type_v16qi, builtin_type_v8qi,
builtin_type_v8hi, builtin_type_v4hi, builtin_type_v2si,
builtin_type_vec64, builtin_type_vec128): Remove.
(init_simd_type): Remove.
(init_vector_type): Make global.
(build_builtin_type_vec64, build_builtin_type_vec128): Remove.
(build_gdbtypes): Do not build vector types.
(_initialize_gdbtypes): Do not swap vector types.
* gdbtypes.h (builtin_type_v2_double, builtin_type_v4_float,
builtin_type_v2_int64, builtin_type_v4_int32, builtin_type_v8_int16,
builtin_type_v16_int8, builtin_type_v2_float, builtin_type_v2_int32,
builtin_type_v4_int16, builtin_type_v8_int8, builtin_type_v4sf,
builtin_type_v4si, builtin_type_v16qi, builtin_type_v8qi,
builtin_type_v8hi, builtin_type_v4hi, builtin_type_v2si,
builtin_type_vec64, builtin_type_vec128): Remove declarations.
(init_vector_type): Add prototype.

* i386-tdep.h (struct gdbarch_tdep): Add i386_mmx_type and
i386_sse_type members.
(i386_mmx_type, i386_sse_type): Change from variables to functions.
* i386-tdep.c (i386_mmx_type, i386_sse_type): Remove variables.
(i386_init_types): Do not build vector types.
(i386_mmx_type, i386_sse_type): New functions.
(i386_register_type): Call them instead of using global variables.
(i386_gdbarch_init): Use XCALLOC to allocate tdep structure.
* amd64-tdep.c (amd64_register_type): Call i386_sse_type instead
of using global variable.

* rs6000-tdep.h (struct gdbarch_tdep): Add ppc_builtin_type_vec64
and ppc_builtin_type_vec128 members.
* rs6000-tdep.c (rs6000_builtin_type_vec64): New function.
(rs6000_builtin_type_vec128): Likewise.
(rs6000_register_type): Call them instead of using builtin_type_vec64
and builtin_type_vec128.
(rs6000_gdbarch_init): Use XCALLOC to allocate tdep structure.

* spu-tdep.c (struct gdbarch_tdep): New data type.
(spu_builtin_type_vec128): Remove variable.
(spu_builtin_type_vec128): New function.
(spu_register_type): Call it instead of using global variable.
(spu_gdbarch_init): Allocate tdep structure.
(spu_init_vector_type): Remove function.
(_initialize_spu_tdep): Do not call it.

* amd64-tdep.c (struct amd64_register_info): Remove.
(amd64_register_info): Remove.
(amd64_register_names): New static variable.
(AMD64_NUM_REGS): Use amd64_register_names instead of
amd64_register_info.
(amd64_register_name): Likewise.
(amd64_register_type): Do not refer to amd64_register_info.

* s390-tdep.c (struct s390_register_info): Remove.
(s390_register_info): Remove.
(s390_register_name): Do not refer to s390_register_info.
(s390_register_type): Likewise.

* sparc64-tdep.c (struct sparc64_register_info): Remove.
(sparc64_register_info, sparc64_pseudo_register_info): Remove.
(sparc64_register_names, sparc64_pseudo_register_names): New.
(SPARC64_NUM_REGS, SPARC64_NUM_PSEUDO_REGS): Use
sparc64_register_names and sparc64_pseudo_register_names instead of
sparc64_register_info and sparc64_pseudo_register_info.
(sparc64_register_name): Likewise.
(sparc64_register_type): Do not refer to sparc64_register_info
and sparc64_pseudo_register_info.

* c-lang.c (cplus_builtin_types): Remove.
(enum cplus_primitive_types): New data type.
(cplus_language_arch_info): New function.
(cplus_language_defn): Set la_language_arch_info member.  Do not set
la_builtin_type_vector and string_char_type members.

* f-lang.c (f_builtin_types): Remove.
(enum f_primitive_types): New data type.
(f_language_arch_info): New function.
(f_language_de): Set la_language_arch_info member.  Do not set
la_builtin_type_vector and string_char_type members.

* m2-lang.c (m2_builtin_types): Remove.
(enum m2_primitive_types): New data type.
(m2_language_arch_info): New function.
(m2_language_defn): Set la_language_arch_info member.  Do not set
la_builtin_type_vector and string_char_type members.

* objc-lang.c (objc_builtin_types): Remove.
(objc_language): Set la_language_arch_info member.  Do not set
la_builtin_type_vector and string_char_type members.

* p-lang.c (pascal_builtin_types): Remove.
(enum pascal_primitive_types): New data type.
(pascal_language_arch_info): New function.
(pascal_language_defn): Set la_language_arch_info member.  Do not set
la_builtin_type_vector and string_char_type members.

* regcache.c (struct regcache): Add ptid_t member.
(regcache_xmalloc): Initialize it.
(regcache_cpy_no_passthrough): Do not refer to current_regcache.
(regcache_dup): Likewise.
(regcache_dup_no_passthrough): Likewise.
(current_regcache): Make static.
(registers_ptid): Remove variable.
(get_thread_regcache): New function.
(get_current_regcache): New function.
(registers_changed): Implement by freeing current regcache.
(regcache_raw_read): Do not refer to current_regcache.  Set
inferior_ptid to regcache->ptid while calling target routines.
(regcache_raw_write): Likewise.
(regcache_raw_supply): Do not refer to current_regcache.
(read_pc_pid): Use thread regcache.  Do not modify inferior_ptid.
(write_pc_pid): Likewise.
(build_regcache): Remove.
(_initialize_regcache): Do not call DEPRECATED_REGISTER_GDBARCH_SWAP
or deprecated_register_gdbarch_swap.  Do not initialize
registers_ptid.
* regcache.h (get_current_regcache): Add prototype.
(get_thread_regcache): Likewise.
(current_regcache): Remove declaration.

* corelow.c (core_open): Replace current_regcache by
get_current_regcache ().
* frame.c (frame_pop): Likewise.
(put_frame_register): Likewise.
(get_current_frame, create_new_frame): Likewise.
* mi/mi-main.c (mi_cmd_data_write_register_values): Likewise.
* stack.c (return_command): Likewise.
* infcall.c (call_function_by_hand): Likewise.
* infrun.c (resume): Likewise.
(save_inferior_status, restore_inferior_status): Likewise.
* linux-fork.c (fork_load_infrun_state): Likewise.
(fork_save_infrun_state): Likewise.
* win32-nat.c (win32_resume): Likewise.
* i386fbsd-nat.c (i386fbsd_resume): Likewise.
* monitor.c (monitor_wait): Likewise.
* remote.c (remote_wait): Likewise.
* remote-mips.c (mips_wait): Likewise.

* bsd-kvm.c (bsd_kvm_open): Likewise
(bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): Likewise.
* fbsd-nat.c (fbsd_make_corefile_notes): Likewise.
* i386-linux-nat.c (i386_linux_resume): Likewise.
* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
(ia64_linux_stopped_data_address): Likewise.

* frv-tdep.c (frv_fdpic_loadmap_addresses): Likewise.
* m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
* mep-tdep.c (current_me_module, current_options): Likewise.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Likewise.

* linux-nat.c (linux_nat_do_thread_registers): Use thread
regcache instead of current_regcache.  Call target_fetch_registers.
(linux_nat_corefile_thread_callback): Update call site.
(linux_nat_do_registers): Likewise.
* procfs.c (procfs_do_thread_registers): Use thread regcache instead
of current_regcache.
(procfs_make_note_section): Likewise.
* proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.
* sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
(ps_lgetfpregs, ps_lsetfpregs): Likewise.

daily update

*** empty log message ***

* regcache.c (read_register, read_register_pid): Remove.
(write_register, write_register_pid): Likewise.
* regcache.h (read_register, read_register_pid): Remove prototype.
(write_register, write_register_pid): Likewise.

* gdbarch.sh (read_pc): Add REGCACHE argument.  Remove PTID argument.
(write_pc): Likewise.  Remove default implementation, add predicate.
* gdbarch.c, gdbarch.h: Regenerate.
* regcache.c (read_pc_pid): Use current regcache instead of calling
read_register_pid.
(write_pc_pid): Check gdbarch_write_pc predicate, implement default
case inline.
(generic_target_write_pc): Remove.
* inferior.h (generic_target_write_pc): Remove.
* frv-tdep.c (frv_gdbarch_init): Do not install it.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.

* avr-tdep.c (avr_read_pc): Add REGCACHE argument.  Remove PTID
argument.  Use REGCACHE instead of calling read_register_pid.
* hppa-hpux-tdep.c (hppa_hpux_read_pc): Likewise.
* hppa-tdep.c (hppa_read_pc): Likewise.
* hppa-tdep.h (hppa_read_pc): Likewise.
* ia64-tdep.c (ia64_read_pc): Likewise.
* m32r-tdep.c (m32r_read_pc): Likewise.
* mep-tdep.c (mep_read_pc): Likewise.
* mn10300-tdep.c (mn10300_read_pc): Likewise.
* spu-tdep.c (spu_read_pc): Likewise.

* arm-tdep.c (arm_write_pc): Add REGCACHE argument.  Remove PTID
argument.  Use REGCACHE instead of calling write_register_pid.
* avr-tdep.c (avr_write_pc): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_write_pc): Likewise.
* hppa-tdep.c (hppa_write_pc): Likewise.
* hppa-tdep.h (hppa_write_pc): Likewise.
* i386-linux-tdep.c (i386_linux_write_pc): Likewise.
* amd64-linux-tdep.c (amd64_linux_write_pc): Likewise.
* ia64-linux-tdep.c (ia64_linux_write_pc): Likewise.
* ia64-tdep.c (ia64_write_pc): Likewise.
* ia64-tdep.h (ia64_write_pc): Likewise.
* m32r-tdep.c (m32r_write_pc): Likewise.
* m88k-tdep.c (m88k_write_pc): Likewise.
* mep-tdep.c (mep_write_pc): Likewise.
* mips-tdep.c (mips_write_pc): Likewise.
* mips-linux-tdep.c (mips_linux_write_pc): Likewise.
* mn10300-tdep.c (mn10300_write_pc): Likewise.
* sparc-tdep.c (sparc_write_pc): Likewise.
* spu-tdep.c (spu_write_pc): Likewise.

* mips-tdep.c (read_signed_register): Remove.
(read_signed_register_pid): Likewise.
(mips_read_pc): Add REGCACHE argument.  Remove PTID argument.
Use REGCACHE instead of calling read_signed_register_pid.

* gdbarch.sh (push_dummy_code): Add REGCACHE argument.
* gdbarch.c, gdbarch.h: Regenerate.
* infcall.c (generic_push_dummy_code): Add REGCACHE argument.
(push_dummy_code): Likewise.  Pass it to callee.
(call_function_by_hand): Pass current regcache to push_dummy_code.

* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Add REGCACHE
argument.  Use it instead of current_regcache.

* cris-tdep.c (cris_push_dummy_code): Add REGCACHE argument.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.

* gdbarch.sh (get_longjmp_target): Add FRAME argument.
* gdbarch.c, gdbarch.h: Regenerate.
* infrun.c (handle_inferior_event): Pass current frame to
gdbarch_get_longjmp_target.

* alpha-tdep.c (alpha_get_longjmp_target): Add FRAME argument.
Read registers from FRAME instead of using read_register.
Use get_frame_arch instead of current_gdbarch.
* arm-tdep.c (arm_get_longjmp_target): Likewise.
* i386-tdep.c (i386_get_longjmp_target): Likewise.
* m68k-tdep.c (m68k_get_longjmp_target): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target): Likewise.
(mips64_linux_get_longjmp_target): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise.

* gdbarch.sh (skip_trampoline_code): Add FRAME argument.
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (generic_skip_trampoline_code): Add FRAME argument.
* arch-utils.h (generic_skip_trampoline_code): Likewise.
* infrun.c (handle_inferior_event): Pass current frame to
gdbarch_skip_trampoline_code and skip_language_trampoline.

* language.c (unk_lang_trampoline): Add FRAME argument.
(skip_language_trampoline): Add FRAME argument.  Pass it to
skip_trampoline callback.
* language.h: Add forward declaration of struct frame_info.
(struct language_defn): Add FRAME argument to skip_trampoline.
(skip_language_trampoline): Add FRAME argument.
* cp-abi.c (cplus_skip_trampoline): Add FRAME argument.  Pass it
to skip_trampoline callback.
* cp-abi.h: Add forward declaration of struct frame_info.
(cplus_skip_trampoline): Add FRAME argument.
(struct cp_abi_ops): Add FRAME argument to skip_trampoline callback.
* gnu-v3-abi.c (gnuv3_skip_trampoline): Add FRAME argument.  Pass it
to gdbarch_skip_trampoline_code.
* objc-lang.c (objc_skip_trampoline): Add FRAME argument.  Pass it
to gdbarch_skip_trampoline_code.

* minsyms.c (find_solib_trampoline_target): Add FRAME argument.
* symtab.h (find_solib_trampoline_target): Likewise.
* obsd-tdep.c (obsd_skip_solib_resolver): Pass current frame to
find_solib_trampoline_target.

* arm-tdep.c (arm_skip_stub): Add FRAME argument.  Read registers
from FRAME instead of calling read_register.

* hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Add FRAME
argument.  Read registers from FRAME instead of using read_register.
* hppa-tdep.c (hppa_skip_trampoline_code): Likewise.
* hppa-tdep.h (hppa_skip_trampoline_code): Add FRAME argument.

* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Add FRAME
argument.

* m32c-tdep.c (m32c_skip_trampoline_code): Add FRAME argument.

* mips-tdep.c (mips_skip_trampoline_code): Add FRAME argument.  Read
registers from FRAME instead of using read_signed_register.

* ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Add FRAME
argument.
(ppc64_standard_linkage_target): Likewise.  Read registers from FRAME
instead of using read_register.
(ppc64_skip_trampoline_code): Add FRAME argument.  Pass it to
ppc64_standard_linkage_target.
* rs6000-tdep.c (rs6000_skip_trampoline_code): Add FRAME argument.
Pass it to find_solib_trampoline_target.  Read registers from FRAME
instead of using read_register.

* xstormy16-tdep.c (xstormy16_skip_trampoline_code): Add FRAME
argument.

* gdbarch.sh (software_single_step): Replace REGCACHE argument by
FRAME argument.
* gdbarch.c, gdbarch.h: Regenerate.
* infrun.c (resume): Pass current frame to SOFTWARE_SINGLE_STEP.

* alpha-tdep.c (alpha_next_pc): Add FRAME argument.  Retrieve
registers from FRAME instead of using read_register.
(alpha_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
to alpha_next_pc.  Use get_frame_pc instead of read_pc.
* alpha-tdep.h (alpha_software_single_step): Replace REGCACHE
argument by FRAME.

* arm-tdep.c (shifted_reg_val): Add FRAME argument.  Read registers
from FRAME instead of using read_register.
(thumb_get_next_pc): Likewise.
(arm_get_next_pc): Likewise.
(arm_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
to arm_get_next_pc.  Use get_frame_pc instead of read_register.
* arm-tdep.h (arm_software_single_step): Replace REGCACHE
argument by FRAME.

* cris-tdep.c (find_step_target): Add FRAME argument.  Read registers
from FRAME instead of using read_register.
(cris_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
to find_step_target.

* mips-tdep.c (mips32_next_pc): Add FRAME argument.  Read registers
from FRAME instead of using read_register / read_signed_register.
(extended_mips16_next_pc): Likewise.
(mips16_next_pc): Likewise.
(mips_next_pc): Likewise.
(mips_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
to mips_next_pc.  Use get_frame_pc instead of read_pc.
* mips-tdep.h (mips_software_single_step): Replace REGCACHE
argument by FRAME.

* rs6000-tdep.c (branch_dest): Add FRAME argument.  Use it instead
of current frame.  Read registers from FRAME.
(deal_with_atomic_sequence): Add FRAME argument.  Pass it to
branch_dest.  Use get_frame_pc instead of read_pc.
(rs6000_software_single_step): Likewise.
(bl_to_blrl_insn_p): Do not call branch_dest.
* rs6000-tdep.h (rs6000_software_single_step): Replace REGCACHE
argument by FRAME.

* sparc64-linux-tdep.c (sparc64_linux_step_trap): Add FRAME argument.
Read registers from FRAME instead of current regcache.
* sparc-linux-tdep.c (sparc32_linux_step_trap): Likewise.
* sparcnbsd-tdep.c (sparcnbsd_step_trap): Likewise.
* sparc-tdep.c (sparc_address_from_register): Remove.
(sparc_analyze_control_transfer): Pass FRAME argument instead of
GDBARCH.  Pass FRAME to step_trap callback.
(sparc_step_trap): Add FRAME argument.
(space_software_single_step): Replace REGCACHE by FRAME.  Pass FRAME
to sparc_analyze_control_transfer.  Read registers from FRAME instead
of calling sparc_address_from_register.
* sparc-tdep.h (struct gdbarch_tdep): Add FRAME argument to
step_trap callback.
(sparc_address_from_register): Remove prototype.
(sparc_software_single_step): Replace REGCACHE argument by FRAME.
(sparcnbsd_step_trap): Add FRAME argument.

* spu-tdep.c (spu_software_single_step): Replace REGCACHE argument
by FRAME.  Read registers from FRAME instead of REGCACHE.

* arm-tdep.c (arm_print_float_info): Use register value from FRAME
instead of calling read_register.

* avr-tdep.c (avr_push_dummy_call): Write to REGCACHE instead of
calling write_register.

* hppa-tdep.c (hppa32_push_dummy_call): Write to REGCACHE instead of
calling write_register.

* ia64-tdep.c (find_func_descr): Add REGCACHE parameter.  Use it
instead of calling read_register.
(ia64_push_dummy_call): Update call to find_func_descr.  Use REGCACHE
instead of calling read_register and write_register.

* m32r-tdep.c (m32r_linux_supply_gregset): Use REGCACHE parameter
instead of current_regcache.

* mn10300-tdep.c (mn10300_push_dummy_call): Write to REGCACHE instead
of calling write_register.
* mn10300-linux-tdep.c (am33_supply_fpregset_method): Use REGCACHE
parameter instead of current_regcache.

* mips-tdep.c (mips2_fp_compat): Add FRAME parameter.  Use it
instead of calling read_register.
(mips_read_fp_register_double, mips_print_fp_register): Update calls.
(mips_eabi_push_dummy_call): Use REGCACHE instead of write_register.
(mips_n32n64_push_dummy_call): Likewise.
(mips_o32_push_dummy_call): Likewise.
(mips_o64_push_dummy_call): Likewise.

* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Use REGCACHE
parameter instead of current_regcache.

* xtensa-tdep.c (xtensa_register_write_masked): Add REGCACHE parameter.
Use it instead of read_register and write_register.
(xtensa_register_read_masked): Likewise.
(xtensa_pseudo_register_read): Update call.
(xtensa_pseudo_register_write): Likewise.
(xtensa_frame_cache): Use register values unwound from NEXT_FRAME
instead of calling read_register.
(xtensa_push_dummy_call): Update comment.

* mips-tdep.c (mips16_scan_prologue): Replace read_next_frame_reg
by frame_unwind_register_signed calls.
(mips32_scan_prologue): Likewise.  Skip analysis of alloca stack
frame allocations when called with NULL NEXT_FRAME parameter.
(read_next_frame_reg): Remove.

* sh-tdep.c (sh_analyze_prologue): Add FPSCR parameter.  Use it
instead of reading the FPSCR register.
(sh_frame_cache): Pass unwound FPSCR register value to
sh_analyze_prologue.
(sh_skip_prologue): Pass dummy FPSCR value to sh_analyze_prologue.

* v850-tdep.c (v850_analyze_prologue): Add CTBP parameter.  Use it
instead of reading the CTBP register.
(v850_frame_cache): Pass unwound CTBP register value to
v850_analyze_prologue.

* sh-tdep.h (sh_show_regs): Add FRAME parameter.
* sh-tdep.c (sh_show_regs): Likewise.
(sh_show_regs_command): Pass current frame to sh_show_regs routine.
(sh_generic_show_regs): Add FRAME parameter.  Use register
values from that frame instead of calling read_register.
(sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs,
sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
sh_dsp_show_regs): Likewise.
* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs,
sh64_show_regs): Likewise.

* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Read from
current regcache instead of calling read_register.

* mep-tdep.c (current_me_module): Read from current regcache
instead of calling read_register.
(current_options): Likewise.

* cris-tdep.c (cris_stopped_data_address): Read register values
from current frame instead of calling read_register.
* frv-tdep.c (frv_stopped_data_address): Likewise.

* solib-sunos.c (sunos_solib_create_inferior_hook): Use write_pc
instead of write_register (PC_REGNUM, ...).

* solib-sunos.c (sunos_solib_create_inferior_hook): Add comment
explaining why the PC adjustment code is necessary.

* m68k-tdep.h (enum m68k_flavour): New.
(struct gdbarch_tdep): New fields
float_return, flavour and fpregs_present.
* m68k-tdep.c (m68k_register_type): Use
fpregs_present and conditionalize floating
registers type on flavour.
(m68k_register_names): New.
(m68k_register_name): Use the above.
(m68k_convert_register_p): Consult fpregs_present.
(m68k_register_to_value, m68k_value_to_register):
Use register_type to obtain the type of floating
point registers.
(m68k_svr4_extract_return_value): Check tdep->float_return.
Use register_type to get the type of floating
point regiters.
(m68k_svr4_store_return_value): Likewise.
(m68k_dwarf_reg_to_regnum): Check tdep->fpregs_present.
(m68k_analyze_register_saves): Likewise.
(m68k_gdbarch_init): Extract infromation
from XML description, if present.  Guess coldfire by
looking at the file, if present. Conditionalize
setting of long double format.  Set decr_pc_after_break
to 2 on coldfire and fido.  Enable XML-driven
register description.
* m68kbsd-tdep.c (m68kbsd_fpreg_offset): Use
size of tdep->fpreg_type, as opposed to hardcoded value.
* Makefile.in (m68k-tdep.o): Update dependencies.

* NEWS: Mention "info spu" commands and qXfer:spu:read and
qXfer:spu:write remote packet types.

daily update

*** empty log message ***

2007-06-14  Paul Brook  <paul@codesourcery.com>

gas/
* config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
narrow shift by immediate.

gas/testsuite/
* gas/arm/thumb32.s: Add tests for shift instructions.
* gas/arm/thumb32.d: Ditto.

bfd/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I . -I ../config.

* acinclude.m4: Don't include m4 files. Remove libtool
kludge.

* Makefile.in: Regenerated.
* doc/Makefile.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.

binutils/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.

* acinclude.m4: Removed.

* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.

gas/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.

* acinclude.m4: Don't include m4 files.
(BFD_BINARY_FOPEN): Removed.
Remove libtool kludge.

* Makefile.in: Regenerated.
* doc/Makefile.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.

gprof/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.

* acinclude.m4: Removed.

* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.

ld/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.

* acinclude.m4: Removed.

* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.

opcodes/

2007-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.

* acinclude.m4: Removed.

* Makefile.in: Regenerated.
* doc/Makefile.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.

2007-06-14  Paolo Bonzini  <bonzini@gnu.org>

* configure.ac: Use ACX_PROG_CC_ALMOST_PEDANTIC too.
* configure: Regenerate.

Update.

2007-06-14  Paolo Bonzini  <bonzini@gnu.org>

        * Makefile.tpl (cleanstrap): Don't delete the toplevel Makefile.
        (distclean-stage[+id+]): Possibly delete stage_last.
        * Makefile.in: Regenerate.

* emultempl/spu_ovl.S: Don't trash lr on tail call from one
overlay to another.
* emultempl/spu_ovl.o: Regenerate.

2007-06-14  Paolo Bonzini  <bonzini@gnu.org>

* aclocal.m4: Include config/warnings.m4.
* configure.ac: Use ACX_PROG_CC_WARNING_OPTS.
* configure: Regenerate.

2007-06-14  Paolo Bonzini  <bonzini@gnu.org>

* acx.m4 (ACX_CHECK_PROG_VER): Remove duplicate lines.

daily update

*** empty log message ***

2007-06-13  Mike Frysinger  <vapier@gentoo.org>

* linux-low.c (linux_create_inferior): Change execv to execvp.
* spu-low.c (spu_create_inferior): Likewies.

* gdb.texinfo (Target Description Format): Add version attribute
for <target>.

* xml-tdesc.c (tdesc_start_target): New.
(target_attributes): New.
(tdesc_elements): Use it.
* features/gdb-target.dtd: Add #FIXED version attribute for
<target>.

2007-06-13  Arthur Huillet  <arthur.huillet@free.fr>

* mi/mi-cmd-var.c (mi_cmd_var_assign): Fix typo.

2007-06-13  Claudio Fontana <claudio.fontana@gmail.com>

* fork-child.c (fork_inferior): Update comment.

Check in missed deletions.

* features/Makefile: Generate regformats for mips-linux and
mips64-linux.
* features/sort-regs.xsl: Correct typo.
* regformats/reg-mips.dat, regformats/reg-mips64.dat: Delete.
* regformats/mips-linux.dat, regformats/mips64-linux.dat: New generated
files.

* Makefile.in (clean): Clean new files instead of deleted ones.
(reg-mips.o, reg-mips.c, reg-mips64.o, reg-mips64.c): Delete.
(mips-linux.o, mips-linux.c, mips64-linux.o, mips64-linux.c): New
rules.
* configure.srv: Specify XML files and new regformats for MIPS and
MIPS64 GNU/Linux.
* linux-mips-low.c (mips_num_regs): Set to only used registers.
(mips_regmap): Do not fetch $0.  Remove unused registers.  Add
an entry for the restart register.
(mips_cannot_fetch_register, mips_cannot_store_register)
(mips_reinsert_addr, mips_fill_fpregset, mips_store_fpregset): Update
register names to match the XML descriptions.
(mips_fill_gregset, mips_store_gregset): Likewise.  Handle the
restart register instead of $0.

* config/mips/linux.mh (TDEP_XML): New.
* features/mips-linux.xml, features/mips64-linux.xml: New files.
* mips-linux-nat.c (mips_linux_register_addr): Handle
MIPS_RESTART_REGNUM.
(mips64_linux_register_addr): Likewise.
(super_xfer_partial, mips_linux_xfer_partial): New.
(_initialize_mips_linux_nat): Add them to the target_ops.
* mips-linux-tdep.c (mips_supply_gregset): Handle MIPS_RESTART_REGNUM.
(mips_fill_gregset, mips64_supply_gregset, mips64_fill_gregset)
(mips_linux_o32_sigframe_init)
(mips_linux_n32n64_sigframe_init): Likewise.
(mips_linux_write_pc, mips_linux_restart_reg_p): New.
(mips_linux_init_abi): Use mips_linux_write_pc.  Check for the
"org.gnu.gdb.mips.linux" feature.
* mips-linux-tdep.h (MIPS_RESTART_REGNUM): New constant.
(mips_linux_restart_reg_p): New prototype.
* mips-tdep.c (mips_gdbarch_init): Pass tdesc_data to the OS/ABI
initialization routine.
* Makefile.in (mips-linux-tdep.o, mips-linux-nat.o): Update.

* gdb.texinfo (MIPS Features): Document org.gnu.gdb.mips.linux.

* Makefile.in (mips-tdep.o): Update.
* mips-tdep.c (struct register_alias, mips_o32_aliases)
(mips_n32_n64_aliases, mips_register_aliases): New.
(mips_register_name): Call tdesc_register_name.
(mips_tdesc_register_reggroup_p): New.
(mips_pseudo_register_type, value_of_mips_user_reg): New.
(mips_gdbarch_init): Add target-described register support.
Register aliases for register names.
* target-descriptions.c (tdesc_register_name): Make global.
(tdesc_register_in_reggroup_p): New function, broken out from
tdesc_register_reggroup_p.
(tdesc_register_reggroup_p): Use it.
* target-descriptions.h (tdesc_register_name)
(tdesc_register_in_reggroup_p): New prototypes.
* NEWS: Correct formatting.  Mention MIPS register support.
* features/mips-cp0.xml, features/mips-fpu.xml,
features/mips64-cp0.xml, gdb/features/mips64-fpu.xml, mips-cpu.xml,
features/mips64-cpu.xml: New files.

* gdb.xml/tdesc-regs.exp: Add MIPS support.  Allow multiple
required features to be included.

* gdb.texinfo (MIPS Features): New subsection.

2007-06-13  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (TARGET_ADDR_BIT): Replace by gdbarch_addr_bit.
* valops.c (value_cast): Likewise.
* utils.c (strlen_paddr, paddr, paddr_nz, paddress): Likewise.
* ui-out.c (ui_out_field_core_addr): Likewise.
* tracepoint.c (tracepoints_info): Likewise.
* symtab.c (print_msymbol_info): Likewise.
* solib-irix.c (irix_current_sos)
(irix_open_symbol_file_object): Likewise.
* remote.c (build_remote_gdbarch_data): Likewise.
* prologue-value.c (make_pv_area): Likewise.
* procfs.c (info_mappings_callback): Likewise.
* printcmd.c (print_scalar_formatted)
(deprecated_print_address_numeric): Likewise.
* memattr.c (mem_info_command): Likewise.
* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
* gdbtypes.c (build_flt, gdbtypes_post_init): Likewise.
* exec.c (print_section_info): Likewise.
* dwarf2read.c (read_subrange_type): Likewise.
* dwarf2loc.c (find_location_expression): Likewise.
* dwarf2expr.c (dwarf2_read_address, unsigned_address_type)
(signed_address_type, execute_stack_op): Likewise.
* breakpoint.c (print_one_breakpoint, breakpoint_1): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-13  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (TARGET_ARCHITECTURE): Replace by gdbarch_bfd_arch_info.
* arch-utils.c (show_architecture): Likewise.
* remote-mips.c (mips_open): Likewise
* nto-tdep.c (nto_find_and_open_solib)
(nto_init_solib_absolute_prefix): Likewise.
* nto-procfs (procfs_open): Likewise.
* m68hc11-tdep.c (gdb_print_insn_m68hc11): Likewise.
* gcore.c (default_gcore_mach, default_gcore_arch): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-13  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (TARGET_BFD_VMA_BIT): Replace by gdbarch_bfd_vma_bit.
* gdbtypes.c (build_flt): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-13  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (BREAKPOINT_FROM_PC): Replace by
gdbarch_breakpoint_from_pc.
* s390-tdep.c (s390_gdbarch_init): Likewise (comment).
* remote.c (remote_insert_breakpoint)
(remote_insert_hw_breakpoint): Likewise.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
* mips-tdep.c (mips_breakpoint_from_pc): Likewise (comment).
* breakpoint.h (bp_target_info): Likewise (comment).
* breakpoint.c (read_memory_nobpt): Likewise.
* mem-break.c (default_memory_insert_breakpoint): Likewise.
(symtab.h, breakpoint.h): Remove include. Remove unnecessary comment.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-13  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (TARGET_PTR_BIT): Replace with gdbarch_ptr_bit.
* solib-svr4.c (svr4_truncate_ptr): Likewise.
* solib-pa64.c (read_dynamic_info): Likewise.
* solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Likewise.
* solib.c (info_sharedlibrary_command): Likewise.
* s390-nat.c (SUBOFF): Likewise.
* p-valprint.c (pascal_val_print): Likewise.
* procfs.c (info_proc_mappings): Likewise.
* printcmd.c (decode_format): Likewise.
* nto-tdep.c (nto_truncate_ptr): Likewise.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips64_linux_get_longjmp_target): Likewise.
* m68k-tdep.c (m68k_get_longjmp_target): Likewise.
* jv-valprint.c (java_value_print): Likewise.
* jv-lang.c (get_java_object_header_size): Likewise.
* hppa-tdep.c (skip_prologue_hard_way, hppa_frame_cache): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code)
(hppa_hpux_unwind_adjust_stub): Likewise.
* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
* gdbtypes.c (make_pointer_type, make_reference_type)
(smash_to_memberptr_type): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

* mips-tdep.c (mips_print_register): Remove unused ALL argument.
(print_gp_register_row): Stop before printing a register bigger
than the ABI register size.
(mips_print_registers_info): Update call to mips_print_register.

* expression.h (enum exp_opcode): Document a register name for
OP_REGISTER.
* parse.c (write_dollar_variable): Write the register name for
OP_REGISTER.
(operator_length_standard): Expect the register name following
OP_REGISTER.
* ada-lang.c (resolve_subexp): Likewise.
* ax-gdb.c (gen_expr): Likewise.
* eval.c (evaluate_subexp_standard): Likewise.
* expprint.c (print_subexp_standard, dump_subexp_body_standard):
Likewise.
* tracepoint.c (encode_actions): Likewise.

* utils.c (set_screen_size): Use INT_MAX for default columns.

* remote.c (remote_protocol_features): Add qXfer:spu:read and
qXfer:spu:write packet types.

daily update

*** empty log message ***

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (DEPRECATED_STACK_ALIGN): Remove.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (STAB_REG_TO_REGNUM): Replace by
gdbarch_stab_reg_to_regnum.
* stabsread.c (define_symbol): Likewise.
* gdbarch.sh (ECOFF_REG_TO_REGNUM): Replace by
gdbarch_ecoff_reg_to_regnum.
* mdebugread.c (parse_symbol): Likewise.
* i386-tdep.c (i386_gdbarch_init): Likewise (comment).
* gdbarch.sh (DWARF_REG_TO_REGNUM): Replace by
gdbarch_dwarf_reg_to_regnum.
* gdbarch.sh (SDB_REG_TO_REGNUM): Replace by gdbarch_sdb_reg_to_regnum.
* coffread.c (process_coff_symbol): Likewise.
* gdbarch.sh (DWARF2_REG_TO_REGNUM): Replace by
gdbarch_dwarf2_reg_to_regnum.
* dwarf2loc.c (dwarf_expr_read_reg,dwarf2_evaluate_loc_desc)
(locexpr_describe_location): Likewise.
* dwarf2-frame.c (read_reg,execute_cfa_program,dwarf2_frame_cache)
(dwarf2_frame_prev_register,dwarf2_signal_frame_this_id): Likewise.
* dwarf2loc.c (DWARF2_REG_TO_REGNUM): Remove macro.
* dwarf2read.c (DWARF2_REG_TO_REGNUM): Remove macro.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (SMASH_TEXT_ADDRESS): Replace by
gdbarch_smash_text_address.
* somread.c (som_symtab_read): Likewise.
* elfread.c (record_minimal_symbol): Likewise.
* dbxread.c (process_one_symbol): Likewise.
* coffread.c (coff_symtab_read): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (REGISTER_TO_VALUE): Replace by gdbarch_register_to_value.
* findvar.c (value_from_register): Likewise.
* gdbarch.sh (VALUE_TO_REGISTER): Replace by gdbarch_value_to_register.
* valops.c (value_assign): Likewise.
* gdbarch.sh (CONVERT_REGISTER_P): Replace by
gdbarch_convert_register_p.
* findvar.c (value_from_register): Likewise.
* valops.c (value_assign): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (REGISTER_SIM_REGNO): Replace by
gdbarch_register_sim_regno.
* sim-regno.h (sim_regno): Likewise (comment).
* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (TARGET_VIRTUAL_FRAME_POINTER): Replace by
gdbarch_virtual_frame_pointer.
* tracepoint.c (encode_actions): Likewise.
* dwarf2loc.c (dwarf2_loc_desc_needs_frame): Likewise.
* ax-gdb.c (gen_frame_args_address, gen_frame_locals_address): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (TARGET_FLOAT_BIT): Replace by gdbarch_float_bit.
* p-lang.c (pascal_create_fundamental_type): Likewise.
* objc-lang.c (objc_create_fundamental_type): Likewise.
* mdebugread.c (_initialize_mdebugread): Likewise.
* m2-lang.c (m2_create_fundamental_type)
(_initialize_m2_language): Likewise.
* gdbtypes.c (build_gdbtypes): Likewise.
* f-lang.c (f_create_fundamental_type, build_fortran_types): Likewise.
* doublest.c (floatformat_from_length): Likewise.
* c-lang.c (c_create_fundamental_type): Likewise.
* ada-lang.c (ada_create_fundamental_type)
(ada_language_arch_info): Likewise.
* gdbarch.sh (TARGET_FLOAT_FORMAT): Replace by gdbarch_float_format.
* value.c (unpack_double): Likewise (comment).
* gdbtypes.c (build_gdbtypes): Likewise.
* doublest.c (floatformat_from_length): Likewise.
* gdbarch.sh (TARGET_DOUBLE_BIT): Replace by gdbarch_double_bit.
* valarith.c (value_binop): Likewise.
* p-lang.c (pascal_create_fundamental_type): Likewise.
* objc-lang.c (objc_create_fundamental_type): Likewise.
* mdebugread.c (_initialize_mdebugread): Likewise.
* m2-lang.c (m2_create_fundamental_type): Likewise.
* gdbtypes.c (build_gdbtypes): Likewise.
* f-lang.c (f_create_fundamental_type, build_fortran_types): Likewise.
* doublest.c (floatformat_from_length): Likewise.
* cris-tdep.c (cris_gdbarch_init): Likewise (comment).
* c-lang.c (c_create_fundamental_type): Likewise.
* ada-lex.l (processReal): Likewise.
* ada-lang.c (ada_create_fundamental_type)
(ada_language_arch_info): Likewise.
* gdbarch.sh (TARGET_DOUBLE_FORMAT): Replace by gdbarch_double_format.
* value.c (unpack_double): Likewise (comment).
* gdbtypes.c (build_gdbtypes): Likewise.
* doublest.c (floatformat_from_length): Likewise.
* gdbarch.sh (TARGET_LONG_DOUBLE_BIT): Replace by
gdbarch_long_double_bit.
* p-lang.c (pascal_create_fundamental_type): Likewise.
* objc-lang.c (objc_create_fundamental_type): Likewise.
* m2-lang.c (m2_create_fundamental_type): Likewise.
* gdbtypes.c (build_gdbtypes): Likewise.
* f-lang.c (f_create_fundamental_type, build_fortran_types): Likewise.
* doublest.c (floatformat_from_length): Likewise.
* c-lang.c (c_create_fundamental_type): Likewise.
* ada-lex.l (processReal): Likewise.
* ada-lang.c (ada_create_fundamental_type)
(ada_language_arch_info): Likewise.
* gdbarch.sh (TARGET_LONG_DOUBLE_FORMAT): Replace by
gdbarch_long_double_format.
* gdbtypes.c (build_gdbtypes): Likewise.
* doublest.c (floatformat_from_length): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-12  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (TARGET_SHORT_BIT): Replace by gdbarch_int_bit.
* ada-lang.c (ada_create_fundamental_type)
(ada_language_arch_info): Likewise.
* c-lang.c (c_create_fundamental_type): Likewise.
* f-lang.c (f_create_fundamental_type, build_fortran_types): Likewise.
* gdbtypes.c (build_gdbtypes, gdbtypes_post_init): Likewise.
* m2-lang.c (m2_create_fundamental_type): Likewise.
* objc-lang.c (objc_create_fundamental_type): Likewise.
* p-lang.c (pascal_create_fundamental_type): Likewise.
* gdbarch.sh (TARGET_INT_BIT): Replace by gdbarch_int_bit.
* c-exp.y (parse_number): Likewise.
* objc-exp.y (parse_number): Likewise.
* ada-lex.l (processInt): Likewise.
* f-exp.y (parse_number): Likewise.
* p-exp.y (parse_number): Likewise.
* ada-lang.c (ada_create_fundamental_type, ada_language_arch_info)
(gdbtypes_post_init, build_gdbtypes): Likewise.
* p-lang.c (pascal_create_fundamental_type): Likewise.
* parse.c (build_parse): Likewise.
* xcoffread.c (_initialize_xcoffread): Likewise.
* stabsread.c (define_symbol, read_one_struct_field, read_enum_type)
(read_range_type): Likewise.
* objc-lang.c (objc_create_fundamental_type): Likewise.
* f-lang.c (build_fortran_types, f_create_fundamental_type): Likewise.
* m2-lang.c (m2_create_fundamental_type, _initialize_m2_language)
(m2_create_fundamental_type): Likewise.
* c-lang.c (c_create_fundamental_type): Likewise.
* coffread.c (coff_read_enum_type): Likewise.
* mdebugread.c (parse_symbol, _initialize_mdebugread): Likewise.
* dwarf2read.c (new_symbol): Likewise.
* gdbarch.sh (TARGET_LONG_BIT): Replace by gdbarch_long_bit.
* c-exp.y (parse_number): Likewise.
* objc-exp.y (parse_number): Likewise.
* ada-lex.l (processInt): Likewise.
* f-exp.y (parse_number): Likewise.
* p-exp.y (parse_number): Likewise.
* valarith.c (value_binop): Likewise.
* symfile.c (read_target_long_array, simple_overlay_update_1): Likewise.
* ada-lang.c (ada_create_fundamental_type)
(ada_language_arch_info): Likewise.
* gdbtypes.c (build_gdbtypes, gdbtypes_post_init): Likewise.
* symfile.c (TARGET_LONG_BYTES): Likewise.
* p-lang.c (pascal_create_fundamental_type): Likewise.
* objc-lang.c (objc_create_fundamental_type): Likewise.
* m2-lang.c (m2_create_fundamental_type): Likewise.
* f-lang.c (f_create_fundamental_type): Likewise.
* c-lang.c (c_create_fundamental_type): Likewise.
* coffread.c (decode_base_type): Likewise.
* gdbarch.sh (TARGET_LONG_LONG_BIT): Replace by gdbarch_long_long_bit.
* c-exp.y (parse_number): Likewise.
* objc-exp.y (parse_number): Likewise.
* p-exp.y (parse_number): Likewise.
* ada-lang.c (ada_create_fundamental_type)
(ada_language_arch_info): Likewise.
* gdbtypes.c (gdbtypes_post_init, build_gdbtypes): Likewise.
* stabsread.c (read_range_type): Likewise.
* p-lang.c (pascal_create_fundamental_type): Likewise.
* objc-lang.c (objc_create_fundamental_type): Likewise.
* m2-lang.c (m2_create_fundamental_type): Likewise.
* f-lang.c (f_create_fundamental_type): Likewise.
* c-lang.c (c_create_fundamental_type): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

* frame-unwind.h (frame_dealloc_cache_ftype): Define.
(struct frame_unwind): Add dealloc_cache.
* frame.c (reinit_frame_cache): Call dealloc_cache on all caches.

* libunwind-frame.h (libunwind_frame_dealloc_cache): Declare.
* libunwind-frame.c (libunwind_frame_dealloc_cache): Define.
(libunwind_frame_unwind): Set dealloc_cache.
* ia64-tdep.c (ia64_libunwind_frame_unwind): Set dealloc_cache.

* gdb.threads/manythreads.exp: Prevent expect buffer overflow
in info threads output.

ChangeLog:

* remote.c (remote_write_qxfer): New function.
(remote_xfer_partial): Add handling for TARGET_OBJECT_SPU.
(remote_read_qxfer): Do not cache empty objects.
(_initialize_remote): Add PACKET_qXfer_spu_read and
PACKET_qXfer_spu_write.

doc/ChangeLog:

* gdb.texinfo (General Query Packets): Document qXfer:spu:read
and qXfer:spu:write packets and mention them under qSupported.

gdbserver/ChangeLog:

* remote-utils.c (decode_xfer_write): New function.
* server.h (decode_xfer_write): Add prototype.
* server.c (handle_query): Add PACKET_LEN argument.  Support
qXfer:spu:read and qXfer:spu:write packets.
(main): Pass packet_len to handle_query.
* spu-low.c (spu_target_ops): Add spu_proc_xfer_spu.
* target.h (target_ops): Add qxfer_spu.

* target.h (enum target_object): Add TARGET_OBJECT_SPU.
* spu-linux-nat.c (spu_xfer_partial): Handle TARGET_OBJECT_SPU.

* spu-tdep.h (SPU_NUM_PSEUDO_REGS): Add 5 pseudo registers.
(enum spu_regnum): Add SPU_FPSCR_REGNUM, SPU_SRR0_REGNUM,
SPU_LSLR_REGNUM, SPU_DECR_REGNUM, SPU_DECR_STATUS_REGNUM.
* spu-tdep.c (infospucmdlist): New variable.
(spu_register_name): Handle additional pseudo registers.
(spu_register_type): Likewise.
(spu_pseudo_register_read): Likewise.
(spu_pseudo_register_write): Likewise.
(spu_pseudo_register_read_spu): New function.
(spu_pseudo_register_write_spu): Likewise.
(info_spu_event_command): New function.
(info_spu_signal_command): Likewise.
(info_spu_mailbox_list): Likewise.
(info_spu_mailbox_command): Likewise.
(spu_mfc_get_bitfield): Likewise.
(info_spu_dma_cmdlist): Likewise.
(info_spu_dma_command): Likewise.
(info_spu_proxydma_command): Likewise.
(info_spu_command): Likewise.
(_initialize_spu_tdep): Install "info spu" commands.

testsuite/ChangeLog:

* gdb.arch/spu-info.exp: New testcase.
* gdb.arch/spu-info.c: New file.

doc/ChangeLog:

* gdb.texinfo (Architectures): Add new SPU section to document
Cell Broadband Engine SPU architecture specific commands.

ChangeLog:

* spu-linux-nat.c (spu_proc_xfer_spu): Do not return failure when
accessing non-seekable spufs files.

gdbserver/ChangeLog:

* spu-low.c (spu_proc_xfer_spu): Do not return failure when
accessing non-seekable spufs files.

*** empty log message ***

daily update

* emulparams/elf32xtensa.sh (OTHER_READONLY_SECTIONS): Add ONLY_IF_RO
for .xt_except_table.
(OTHER_RELRO_SECTIONS): New.

bfd/
        * elf32-xtensa.c (extend_ebb_bounds_forward): Use renamed
        XTENSA_PROP_NO_TRANSFORM flag instead of XTENSA_PROP_INSN_NO_TRANSFORM.
        (extend_ebb_bounds_backward, compute_text_actions): Likewise.
        (compute_ebb_proposed_actions, coalesce_shared_literal): Likewise.
        (xtensa_get_property_predef_flags): Likewise.
        (compute_removed_literals): Pass new arguments to is_removable_literal.
        (is_removable_literal): Add sec, prop_table and ptblsize arguments.
        Do not remove literal if the NO_TRANSFORM property flag is set.
gas/
        * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
        (XTENSA_PROP_NO_TRANSFORM): ...this.
        (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
        (xtensa_mark_frags_for_org): New.
        (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
        (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
        (get_frag_property_flags): Adjust reference to is_no_transform flag.
        (xtensa_frag_flags_combinable): Likewise.
        (frag_flags_to_number): Likewise.  Use XTENSA_PROP_NO_TRANSFORM.
        * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
include/elf/
        * xtensa.h (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
        (XTENSA_PROP_NO_TRANSFORM): ...this.
ld/
        * emultempl/xtensaelf.em (replace_insn_sec_with_prop_sec): Use renamed
        XTENSA_PROP_NO_TRANSFORM flag instead of XTENSA_PROP_INSN_NO_TRANSFORM.

* dwarf.c (decode_location_expression): Add DW_OP_form_tls_address.

daily update

*** empty log message ***

daily update

*** empty log message ***

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (SKIP_TRAMPOLINE_CODE): Replace by
gdbarch_skip_trampoline_code.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise (comment).
* objc-lang.c (objc_skip_trampoline)
(objc_submethod_helper_data): Likewise.
* m32c-lang.c (m32c_skip_trampoline_code): Likewise (comment).
* infrun.c (handle_inferior_event): Likewise.
* gnu-v3-abi.c (gnuv3_skip_trampoline): Likewise.
* gdbarch.sh (IN_SOLIB_RETURN_TRAMPOLINE): Replace by
gdbarch_in_solib_return_trampoline.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise (comment).
* infrun.c (handle_inferior_event): Likewise.
* hppa-tdep.c (hppa_stub_unwind_sniffer): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (SKIP_PROLOGUE): Replace by gdbarch_skip_prologue.
* symtab.c (find_function_start_sal, in_prologue): Likewise.
* linespec.c (minsym_found): Likewise.
* infrun.c (step_into_function): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (NAME_OF_MALLOC): Replace by gdbarch_name_of_malloc.
* valops.c (value_allocate_space_in_inferior): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (MEMORY_INSERT_BREAKPOINT): Replace by
gdbarch_memory_insert_breakpoint.
* mem-break.c (memory_insert_breakpoint): Likewise.
* gdbarch.sh (MEMORY_REMOVE_BREAKPOINT): Replace by
gdbarch_memory_remove_breakpoint.
* mem-break.c (memory_remove_breakpoint): Likewise.
* gdbarch.c, gdbarch.h: Regenerate.

2007-06-09  Markus Deuling  <deuling@de.ibm.com>

* gdbarch.sh (FETCH_TLS_LOAD_MODULE_ADDRESS): Replace by
gdbarch_fetch_tls_load_module_address.
* gdbarch.sh (FETCH_TLS_LOAD_MODULE_ADDRESS_P): Replace by
gdbarch_fetch_tls_load_module_address_p.
* gdbarch.c, gdbarch.h: Regenerate.