Revert "usb: dwc3: Soft reset phy on probe for host"

commit 7059fbebcb00554c3f31e5b5d93ef6d2d96dc7b4 upstream.

This reverts commit 8bea147dfdf823eaa8d3baeccc7aeb041b41944b.

The phy soft reset GUSB2PHYCFG.PHYSOFTRST only applies to UTMI phy, not
ULPI. This fix is incomplete.

Cc: <stable@vger.kernel.org>
Fixes: 8bea147dfdf8 ("usb: dwc3: Soft reset phy on probe for host")
Reported-by: Köry Maincent <kory.maincent@bootlin.com>
Closes: https://lore.kernel.org/linux-usb/20231205151959.5236c231@kmaincent-XPS-13-7390
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/29a26593a60eba727de872a3e580a674807b3339.1703282469.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Queue PM runtime idle on disconnect event

commit 3c7af52c7616c3aa6dacd2336ec748d4a65df8f4 upstream.

There is a scenario where DWC3 runtime suspend is blocked due to the
dwc->connected flag still being true while PM usage_count is zero after
DWC3 giveback is completed and the USB gadget session is being terminated.
This leads to a case where nothing schedules a PM runtime idle for the
device.

The exact condition is seen with the following sequence:
  1.  USB bus reset is issued by the host
  2.  Shortly after, or concurrently, a USB PD DR SWAP request is received
      (sink->source)
  3.  USB bus reset event handler runs and issues
      dwc3_stop_active_transfers(), and pending transfer are stopped
  4.  DWC3 usage_count decremented to 0, and runtime idle occurs while
      dwc->connected == true, returns -EBUSY
  5.  DWC3 disconnect event seen, dwc->connected set to false due to DR
      swap handling
  6.  No runtime idle after this point

Address this by issuing an asynchronous PM runtime idle call after the
disconnect event is completed, as it modifies the dwc->connected flag,
which is what blocks the initial runtime idle.

Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM")
Cc: <stable@vger.kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20240103214946.2596-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Handle EP0 request dequeuing properly

commit 730e12fbec53ab59dd807d981a204258a4cfb29a upstream.

Current EP0 dequeue path will share the same as other EPs.  However, there
are some special considerations that need to be made for EP0 transfers:

  - EP0 transfers never transition into the started_list
  - EP0 only has one active request at a time

In case there is a vendor specific control message for a function over USB
FFS, then there is no guarantee on the timeline which the DATA/STATUS stage
is responded to.  While this occurs, any attempt to end transfers on
non-control EPs will end up having the DWC3_EP_DELAY_STOP flag set, and
defer issuing of the end transfer command.  If the USB FFS application
decides to timeout the control transfer, or if USB FFS AIO path exits, the
USB FFS driver will issue a call to usb_ep_dequeue() for the ep0 request.

In case of the AIO exit path, the AIO FS blocks until all pending USB
requests utilizing the AIO path is completed.  However, since the dequeue
of ep0 req does not happen properly, all non-control EPs with the
DWC3_EP_DELAY_STOP flag set will not be handled, and the AIO exit path will
be stuck waiting for the USB FFS data endpoints to receive a completion
callback.

Fix is to utilize dwc3_ep0_reset_state() in the dequeue API to ensure EP0
is brought back to the SETUP state, and ensures that any deferred end
transfer commands are handled.  This also will end any active transfers
on EP0, compared to the previous implementation which directly called
giveback only.

Fixes: fcd2def66392 ("usb: dwc3: gadget: Refactor dwc3_gadget_ep_dequeue")
Cc: stable <stable@kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20231206201814.32664-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc: ep0: Update request status in dwc3_ep0_stall_restart

commit e9d40b215e38480fd94c66b06d79045717a59e9c upstream.

Current implementation blocks the running operations when Plug-out and
Plug-In is performed continuously, process gets stuck in
dwc3_thread_interrupt().

Code Flow:

CPU1

->Gadget_start
->dwc3_interrupt
->dwc3_thread_interrupt
->dwc3_process_event_buf
->dwc3_process_event_entry
->dwc3_endpoint_interrupt
->dwc3_ep0_interrupt
->dwc3_ep0_inspect_setup
->dwc3_ep0_stall_and_restart

By this time if pending_list is not empty, it will get the next request
on the given list and calls dwc3_gadget_giveback which will unmap request
and call its complete() callback to notify upper layers that it has
completed. Currently dwc3_gadget_giveback status is set to -ECONNRESET,
whereas it should be -ESHUTDOWN based on condition if not dwc->connected
is true.

Cc: <stable@vger.kernel.org>
Fixes: d742220b3577 ("usb: dwc3: ep0: giveback requests on stall_and_restart")
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Link: https://lore.kernel.org/r/20231222094704.20276-1-quic_uaggarwa@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: phy: mxs: remove CONFIG_USB_OTG condition for mxs_phy_is_otg_host()

commit ff2b89de471da942a4d853443688113a44fd35ed upstream.

When CONFIG_USB_OTG is not set, mxs_phy_is_otg_host() will always return
false. This behaviour is wrong. Since phy.last_event will always be set
for either host or device mode. Therefore, CONFIG_USB_OTG condition
can be removed.

Fixes: 5eda42aebb76 ("usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()")
cc:  <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20231228110753.1755756-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()"

commit 895ee5aefb7e24203de5dffae7ce9a02d78fa3d1 upstream.

This reverts commit 3c5b006f3ee800b4bd9ed37b3a8f271b8560126e.

gadget_is_{super|dual}speed() API check UDC controller capitblity. It
should pass down highest speed endpoint descriptor to UDC controller. So
UDC controller driver can reserve enough resource at check_config(),
especially mult and maxburst. So UDC driver (such as cdns3) can know need
at least (mult + 1) * (maxburst + 1) * wMaxPacketSize internal memory for
this uvc functions.

Cc: <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231224153816.1664687-5-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug

commit 71fee48fb772ac4f6cfa63dbebc5629de8b4cc09 upstream.

When offlining and onlining CPUs the overall reported idle and iowait
times as reported by /proc/stat jump backward and forward:

cpu  132 0 176 225249 47 6 6 21 0 0
cpu0 80 0 115 112575 33 3 4 18 0 0
cpu1 52 0 60 112673 13 3 1 2 0 0

cpu  133 0 177 226681 47 6 6 21 0 0
cpu0 80 0 116 113387 33 3 4 18 0 0

cpu  133 0 178 114431 33 6 6 21 0 0 <---- jump backward
cpu0 80 0 116 114247 33 3 4 18 0 0
cpu1 52 0 61 183 0 3 1 2 0 0        <---- idle + iowait start with 0

cpu  133 0 178 228956 47 6 6 21 0 0 <---- jump forward
cpu0 81 0 117 114929 33 3 4 18 0 0

Reason for this is that get_idle_time() in fs/proc/stat.c has different
sources for both values depending on if a CPU is online or offline:

- if a CPU is online the values may be taken from its per cpu
  tick_cpu_sched structure

- if a CPU is offline the values are taken from its per cpu cpustat
  structure

The problem is that the per cpu tick_cpu_sched structure is set to zero on
CPU offline. See tick_cancel_sched_timer() in kernel/time/tick-sched.c.

Therefore when a CPU is brought offline and online afterwards both its idle
and iowait sleeptime will be zero, causing a jump backward in total system
idle and iowait sleeptime. In a similar way if a CPU is then brought
offline again the total idle and iowait sleeptimes will jump forward.

It looks like this behavior was introduced with commit 4b0c0f294f60
("tick: Cleanup NOHZ per cpu data on cpu down").

This was only noticed now on s390, since we switched to generic idle time
reporting with commit be76ea614460 ("s390/idle: remove arch_cpu_idle_time()
and corresponding code").

Fix this by preserving the values of idle_sleeptime and iowait_sleeptime
members of the per-cpu tick_sched structure on CPU hotplug.

Fixes: 4b0c0f294f60 ("tick: Cleanup NOHZ per cpu data on cpu down")
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240115163555.1004144-1-hca@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Increase default stack size to 32KB

commit 18f14afe281648e31ed35c9ad2fcb724c4838ad9 upstream.

There are reports of kernels crashing due to stack overflow while
running OpenShift (Kubernetes). The primary contributor to the stack
usage seems to be openvswitch, which is used by OVN-Kubernetes (based on
OVN (Open Virtual Network)), but NFS also contributes in some stack
traces.

There may be some opportunities to reduce stack usage in the openvswitch
code, but doing so potentially require tradeoffs vs performance, and
also requires testing across architectures.

Looking at stack usage across the kernel (using -fstack-usage), shows
that ppc64le stack frames are on average 50-100% larger than the
equivalent function built for x86-64. Which is not surprising given the
minimum stack frame size is 32 bytes on ppc64le vs 16 bytes on x86-64.

So increase the default stack size to 32KB for the modern 64-bit Book3S
platforms, ie. pseries (virtualised) and powernv (bare metal). That
leaves the older systems like G5s, and the AmigaOne (pasemi) with a 16KB
stack which should be sufficient on those machines.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Link: https://msgid.link/20231215124449.317597-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings

commit b99a212a7697c542b460adaa15d4a98abf8223f0 upstream.

Kernel test robot reports of kerneldoc related warnings that happen with
make W=n for "parameter or member not described".

These were caused by changes to function parameter names with
earlier commits where the kerneldoc parts were not updated.

Fixes: 49cd16bb573e ("clocksource/drivers/timer-ti-dm: Simplify register writes with dmtimer_write()")
Fixes: a6e543f61531 ("clocksource/drivers/timer-ti-dm: Move struct omap_dm_timer fields to driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311040403.DzIiBuwU-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311040606.XL5OcR9O-lkp@intel.com/
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231114072930.40615-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix race between mmput() and do_exit()

commit 9a9ab0d963621d9d12199df9817e66982582d5a5 upstream.

Task A calls binder_update_page_range() to allocate and insert pages on
a remote address space from Task B. For this, Task A pins the remote mm
via mmget_not_zero() first. This can race with Task B do_exit() and the
final mmput() refcount decrement will come from Task A.

  Task A            | Task B
  ------------------+------------------
  mmget_not_zero()  |
                    |  do_exit()
                    |    exit_mm()
                    |      mmput()
  mmput()           |
    exit_mmap()     |
      remove_vma()  |
        fput()      |

In this case, the work of ____fput() from Task B is queued up in Task A
as TWA_RESUME. So in theory, Task A returns to userspace and the cleanup
work gets executed. However, Task A instead sleep, waiting for a reply
from Task B that never comes (it's dead).

This means the binder_deferred_release() is blocked until an unrelated
binder event forces Task A to go back to userspace. All the associated
death notifications will also be delayed until then.

In order to fix this use mmput_async() that will schedule the work in
the corresponding mm->async_put_work WQ instead of Task A.

Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-4-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netback: don't produce zero-size SKB frags

commit c7ec4f2d684e17d69bbdd7c4324db0ef5daac26a upstream.

While frontends may submit zero-size requests (wasting a precious slot),
core networking code as of at least 3ece782693c4b ("sock: skb_copy_ubufs
support for compound pages") can't deal with SKBs when they have all
zero-size fragments. Respond to empty requests right when populating
fragments; all further processing is fragment based and hence won't
encounter these empty requests anymore.

In a way this should have been that way from the beginning: When no data
is to be transferred for a particular request, there's not even a point
in validating the respective grant ref. That's no different from e.g.
passing NULL into memcpy() when at the same time the size is 0.

This is XSA-448 / CVE-2023-46838.

Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"

commit 0f35b0a7b8fa402adbffa2565047cdcc4c480153 upstream.

That commit causes NULL pointer dereferences in dmesgs when
running applications using ROCm, including clinfo, blender,
and PyTorch, since v6.6.1. Revert it to fix blender again.

This reverts commit 96c211f1f9ef82183493f4ceed4e347b52849149.

Closes: https://github.com/ROCm/ROCm/issues/2596
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2991
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Kaibo Ma <ent3rm4n@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rust: Ignore preserve-most functions

commit bad098d76835c1379e1cf6afc935f8a7e050f83c upstream.

Neither bindgen nor Rust know about the preserve-most calling
convention, and Clang describes it as unstable. Since we aren't using
functions with this calling convention from Rust, blocklist them.

These functions are only added to the build when list hardening is
enabled, which is likely why others didn't notice this yet.

Signed-off-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231031201945.1412345-1-mmaurer@google.com
[ Used Markdown for consistency with the other comments in the file. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: atkbd - use ab83 as id when skipping the getid command

commit 58f65f9db7e0de366a5a115c2e2c0703858bba69 upstream.

Barnabás reported that the change to skip the getid command
when the controller is in translated mode on laptops caused
the Version field of his "AT Translated Set 2 keyboard"
input device to change from ab83 to abba, breaking a custom
hwdb entry for this keyboard.

Use the standard ab83 id for keyboards when getid is skipped
(rather then that getid fails) to avoid reporting a different
Version to userspace then before skipping the getid.

Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode")
Reported-by: Barnabás Pőcze <pobrn@protonmail.com>
Closes: https://lore.kernel.org/linux-input/W1ydwoG2fYv85Z3C3yfDOJcVpilEvGge6UGa9kZh8zI2-qkHXp7WLnl2hSkFz63j-c7WupUWI5TLL6n7Lt8DjRuU-yJBwLYWrreb1hbnd6A=@protonmail.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240116204325.7719-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mips/smp: Call rcutree_report_cpu_starting() earlier

commit 55702ec9603ebeffb15e6f7b113623fe1d8872f4 upstream.

rcutree_report_cpu_starting() must be called before
clockevents_register_device() to avoid the following lockdep splat triggered by
calling list_add() when CONFIG_PROVE_RCU_LIST=y:

  WARNING: suspicious RCU usage
  ...
  -----------------------------
  kernel/locking/lockdep.c:3680 RCU-list traversed in non-reader section!!

  other info that might help us debug this:

  RCU used illegally from offline CPU!
  rcu_scheduler_active = 1, debug_locks = 1
  no locks held by swapper/1/0.
  ...
  Call Trace:
  [<ffffffff8012a434>] show_stack+0x64/0x158
  [<ffffffff80a93d98>] dump_stack_lvl+0x90/0xc4
  [<ffffffff801c9e9c>] __lock_acquire+0x1404/0x2940
  [<ffffffff801cbf3c>] lock_acquire+0x14c/0x448
  [<ffffffff80aa4260>] _raw_spin_lock_irqsave+0x50/0x88
  [<ffffffff8021e0c8>] clockevents_register_device+0x60/0x1e8
  [<ffffffff80130ff0>] r4k_clockevent_init+0x220/0x3a0
  [<ffffffff801339d0>] start_secondary+0x50/0x3b8

raw_smp_processor_id() is required in order to avoid calling into lockdep
before RCU has declared the CPU to be watched for readers.

See also commit 29368e093921 ("x86/smpboot:  Move rcu_cpu_starting() earlier"),
commit de5d9dae150c ("s390/smp: move rcu_cpu_starting() earlier") and commit
99f070b62322 ("powerpc/smp: Call rcu_cpu_starting() earlier").

Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix unused alloc->free_async_space

commit c6d05e0762ab276102246d24affd1e116a46aa0c upstream.

Each transaction is associated with a 'struct binder_buffer' that stores
the metadata about its buffer area. Since commit 74310e06be4d ("android:
binder: Move buffer out of area shared with user space") this struct is
no longer embedded within the buffer itself but is instead allocated on
the heap to prevent userspace access to this driver-exclusive info.

Unfortunately, the space of this struct is still being accounted for in
the total buffer size calculation, specifically for async transactions.
This results in an additional 104 bytes added to every async buffer
request, and this area is never used.

This wasted space can be substantial. If we consider the maximum mmap
buffer space of SZ_4M, the driver will reserve half of it for async
transactions, or 0x200000. This area should, in theory, accommodate up
to 262,144 buffers of the minimum 8-byte size. However, after adding
the extra 'sizeof(struct binder_buffer)', the total number of buffers
drops to only 18,724, which is a sad 7.14% of the actual capacity.

This patch fixes the buffer size calculation to enable the utilization
of the entire async buffer space. This is expected to reduce the number
of -ENOSPC errors that are seen on the field.

Fixes: 74310e06be4d ("android: binder: Move buffer out of area shared with user space")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-6-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix async space check for 0-sized buffers

commit 3091c21d3e9322428691ce0b7a0cfa9c0b239eeb upstream.

Move the padding of 0-sized buffers to an earlier stage to account for
this round up during the alloc->free_async_space check.

Fixes: 74310e06be4d ("android: binder: Move buffer out of area shared with user space")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231201172212.1813387-5-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

keys, dns: Fix size check of V1 server-list header

commit acc657692aed438e9931438f8c923b2b107aebf9 upstream.

Fix the size check added to dns_resolver_preparse() for the V1 server-list
header so that it doesn't give EINVAL if the size supplied is the same as
the size of the header struct (which should be valid).

This can be tested with:

        echo -n -e '\0\0\01\xff\0\0' | keyctl padd dns_resolver desc @p

which will give "add_key: Invalid argument" without this fix.

Fixes: 1997b3cb4217 ("keys, dns: Fix missing size check of V1 server-list header")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/ZZ4fyY4r3rqgZL+4@xpf.sh.intel.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/bpf: Add assert for user stacks in test_task_stack

commit 727a92d62fd6a382b4c5972008e45667e707b0e4 upstream.

This is a follow up to:
commit b8e3a87a627b ("bpf: Add crosstask check to __bpf_get_stack").

This test ensures that the task iterator only gets a single
user stack (for the current task).

Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20231112023010.144675-1-linux@jordanrome.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"

commit e3977e0609a07d86406029fceea0fd40d7849368 upstream.

This reverts commit dad3fb67ca1cbef87ce700e83a55835e5921ce8a.

The commit converted kernfs_idr_lock to an IRQ-safe raw_spinlock because it
could be acquired while holding an rq lock through bpf_cgroup_from_id().
However, kernfs_idr_lock is held while doing GPF_NOWAIT allocations which
involves acquiring an non-IRQ-safe and non-raw lock leading to the following
lockdep warning:

  =============================
  [ BUG: Invalid wait context ]
  6.7.0-rc5-kzm9g-00251-g655022a45b1c #578 Not tainted
  -----------------------------
  swapper/0/0 is trying to lock:
  dfbcd488 (&c->lock){....}-{3:3}, at: local_lock_acquire+0x0/0xa4
  other info that might help us debug this:
  context-{5:5}
  2 locks held by swapper/0/0:
   #0: dfbc9c60 (lock){+.+.}-{3:3}, at: local_lock_acquire+0x0/0xa4
   #1: c0c012a8 (kernfs_idr_lock){....}-{2:2}, at: __kernfs_new_node.constprop.0+0x68/0x258
  stack backtrace:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc5-kzm9g-00251-g655022a45b1c #578
  Hardware name: Generic SH73A0 (Flattened Device Tree)
   unwind_backtrace from show_stack+0x10/0x14
   show_stack from dump_stack_lvl+0x68/0x90
   dump_stack_lvl from __lock_acquire+0x3cc/0x168c
   __lock_acquire from lock_acquire+0x274/0x30c
   lock_acquire from local_lock_acquire+0x28/0xa4
   local_lock_acquire from ___slab_alloc+0x234/0x8a8
   ___slab_alloc from __slab_alloc.constprop.0+0x30/0x44
   __slab_alloc.constprop.0 from kmem_cache_alloc+0x7c/0x148
   kmem_cache_alloc from radix_tree_node_alloc.constprop.0+0x44/0xdc
   radix_tree_node_alloc.constprop.0 from idr_get_free+0x110/0x2b8
   idr_get_free from idr_alloc_u32+0x9c/0x108
   idr_alloc_u32 from idr_alloc_cyclic+0x50/0xb8
   idr_alloc_cyclic from __kernfs_new_node.constprop.0+0x88/0x258
   __kernfs_new_node.constprop.0 from kernfs_create_root+0xbc/0x154
   kernfs_create_root from sysfs_init+0x18/0x5c
   sysfs_init from mnt_init+0xc4/0x220
   mnt_init from vfs_caches_init+0x6c/0x88
   vfs_caches_init from start_kernel+0x474/0x528
   start_kernel from 0x0

Let's rever the commit. It's undesirable to spread out raw spinlock usage
anyway and the problem can be solved by protecting the lookup path with RCU
instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrea Righi <andrea.righi@canonical.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: http://lkml.kernel.org/r/CAMuHMdV=AKt+mwY7svEq5gFPx41LoSQZ_USME5_MEdWQze13ww@mail.gmail.com
Link: https://lore.kernel.org/r/20240109214828.252092-2-tj@kernel.org
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs: convert kernfs_idr_lock to an irq safe raw spinlock

commit c312828c37a72fe2d033a961c47c227b0767e9f8 upstream.

bpf_cgroup_from_id() is basically a wrapper to cgroup_get_from_id(),
that is relying on kernfs to determine the right cgroup associated to
the target id.

As a kfunc, it has the potential to be attached to any function through
BPF, particularly in contexts where certain locks are held.

However, kernfs is not using an irq safe spinlock for kernfs_idr_lock,
that means any kernfs function that is acquiring this lock can be
interrupted and potentially hit bpf_cgroup_from_id() in the process,
triggering a deadlock.

For example, it is really easy to trigger a lockdep splat between
kernfs_idr_lock and rq->_lock, attaching a small BPF program to
__set_cpus_allowed_ptr_locked() that just calls bpf_cgroup_from_id():

 =====================================================
 WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
 6.7.0-rc7-virtme #5 Not tainted
 -----------------------------------------------------
 repro/131 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
 ffffffffb2dc4578 (kernfs_idr_lock){+.+.}-{2:2}, at: kernfs_find_and_get_node_by_id+0x1d/0x80

 and this task is already holding:
 ffff911cbecaf218 (&rq->__lock){-.-.}-{2:2}, at: task_rq_lock+0x50/0xc0
 which would create a new lock dependency:
  (&rq->__lock){-.-.}-{2:2} -> (kernfs_idr_lock){+.+.}-{2:2}

 but this new dependency connects a HARDIRQ-irq-safe lock:
  (&rq->__lock){-.-.}-{2:2}

 ... which became HARDIRQ-irq-safe at:
   lock_acquire+0xbf/0x2b0
   _raw_spin_lock_nested+0x2e/0x40
   scheduler_tick+0x5d/0x170
   update_process_times+0x9c/0xb0
   tick_periodic+0x27/0xe0
   tick_handle_periodic+0x24/0x70
   __sysvec_apic_timer_interrupt+0x64/0x1a0
   sysvec_apic_timer_interrupt+0x6f/0x80
   asm_sysvec_apic_timer_interrupt+0x1a/0x20
   memcpy+0xc/0x20
   arch_dup_task_struct+0x15/0x30
   copy_process+0x1ce/0x1eb0
   kernel_clone+0xac/0x390
   kernel_thread+0x6f/0xa0
   kthreadd+0x199/0x230
   ret_from_fork+0x31/0x50
   ret_from_fork_asm+0x1b/0x30

 to a HARDIRQ-irq-unsafe lock:
  (kernfs_idr_lock){+.+.}-{2:2}

 ... which became HARDIRQ-irq-unsafe at:
 ...
   lock_acquire+0xbf/0x2b0
   _raw_spin_lock+0x30/0x40
   __kernfs_new_node.isra.0+0x83/0x280
   kernfs_create_root+0xf6/0x1d0
   sysfs_init+0x1b/0x70
   mnt_init+0xd9/0x2a0
   vfs_caches_init+0xcf/0xe0
   start_kernel+0x58a/0x6a0
   x86_64_start_reservations+0x18/0x30
   x86_64_start_kernel+0xc5/0xe0
   secondary_startup_64_no_verify+0x178/0x17b

 other info that might help us debug this:

  Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(kernfs_idr_lock);
                                local_irq_disable();
                                lock(&rq->__lock);
                                lock(kernfs_idr_lock);
   <Interrupt>
     lock(&rq->__lock);

  *** DEADLOCK ***

Prevent this deadlock condition converting kernfs_idr_lock to a raw irq
safe spinlock.

The performance impact of this change should be negligible and it also
helps to prevent similar deadlock conditions with any other subsystems
that may depend on kernfs.

Fixes: 332ea1f697be ("bpf: Add bpf_cgroup_from_id() kfunc")
Cc: stable <stable@kernel.org>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231229074916.53547-1-andrea.righi@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

class: fix use-after-free in class_register()

commit 93ec4a3b76404bce01bd5c9032bef5df6feb1d62 upstream.

The lock_class_key is still registered and can be found in
lock_keys_hash hlist after subsys_private is freed in error
handler path.A task who iterate over the lock_keys_hash
later may cause use-after-free.So fix that up and unregister
the lock_class_key before kfree(cp).

On our platform, a driver fails to kset_register because of
creating duplicate filename '/class/xxx'.With Kasan enabled,
it prints a invalid-access bug report.

KASAN bug report:

BUG: KASAN: invalid-access in lockdep_register_key+0x19c/0x1bc
Write of size 8 at addr 15ffff808b8c0368 by task modprobe/252
Pointer tag: [15], memory tag: [fe]

CPU: 7 PID: 252 Comm: modprobe Tainted: G        W
 6.6.0-mainline-maybe-dirty #1

Call trace:
dump_backtrace+0x1b0/0x1e4
show_stack+0x2c/0x40
dump_stack_lvl+0xac/0xe0
print_report+0x18c/0x4d8
kasan_report+0xe8/0x148
__hwasan_store8_noabort+0x88/0x98
lockdep_register_key+0x19c/0x1bc
class_register+0x94/0x1ec
init_module+0xbc/0xf48 [rfkill]
do_one_initcall+0x17c/0x72c
do_init_module+0x19c/0x3f8
...
Memory state around the buggy address:
ffffff808b8c0100: 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a
ffffff808b8c0200: 8a 8a 8a 8a 8a 8a 8a 8a fe fe fe fe fe fe fe fe
>ffffff808b8c0300: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe
                                     ^
ffffff808b8c0400: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03

As CONFIG_KASAN_GENERIC is not set, Kasan reports invalid-access
not use-after-free here.In this case, modprobe is manipulating
the corrupted lock_keys_hash hlish where lock_class_key is already
freed before.

It's worth noting that this only can happen if lockdep is enabled,
which is not true for normal system.

Fixes: dcfbb67e48a2 ("driver core: class: use lock_class_key already present in struct subsys_private")
Cc: stable <stable@kernel.org>
Signed-off-by: Jing Xia <jing.xia@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Link: https://lore.kernel.org/r/20231220024603.186078-1-jing.xia@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: unittest: Fix of_count_phandle_with_args() expected value message

[ Upstream commit 716089b417cf98d01f0dc1b39f9c47e1d7b4c965 ]

The expected result value for the call to of_count_phandle_with_args()
was updated from 7 to 8, but the accompanying error message was
forgotten.

Fixes: 4dde83569832f937 ("of: Fix double free in of_parse_phandle_with_args_map")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240111085025.2073894-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: imxfb: fix left margin setting

[ Upstream commit 5758844105f7dd9a0a04990cd92499a1a593dd36 ]

The previous setting did not take into account the CSTN mode.
For the H_WAIT_2 bitfield (bits 0-7) of the LCDC Horizontal Configuration
Register (LCDCR), the IMX25RM manual states that:

In TFT mode, it specifies the number of SCLK periods between the end of
HSYNC and the beginning of OE signal, and the total delay time equals
(H_WAIT_2 + 3) of SCLK periods.
In CSTN mode, it specifies the number of SCLK periods between the end of
HSYNC and the first display data in each line, and the total delay time
equals (H_WAIT_2 + 2) of SCLK periods.

The patch handles both cases.

Fixes: 4e47382fbca9 ("fbdev: imxfb: warn about invalid left/right margin")
Fixes: 7e8549bcee00 ("imxfb: Fix margin settings")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: Fix double free in of_parse_phandle_with_args_map

[ Upstream commit 4dde83569832f9377362e50f7748463340c5db6b ]

In of_parse_phandle_with_args_map() the inner loop that
iterates through the map entries calls of_node_put(new)
to free the reference acquired by the previous iteration
of the inner loop. This assumes that the value of "new" is
NULL on the first iteration of the inner loop.

Make sure that this is true in all iterations of the outer
loop by setting "new" to NULL after its value is assigned to "cur".

Extend the unittest to detect the double free and add an additional
test case that actually triggers this path.

Fixes: bd6f2fd5a1 ("of: Support parsing phandle argument lists through a nexus node")
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: "Christian A. Ehrhardt" <lk@c--e.de>
Link: https://lore.kernel.org/r/20231229105411.1603434-1-lk@c--e.de
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: validate the zero field of packet header

[ Upstream commit 516b3eb8c8065f7465f87608d37a7ed08298c7a5 ]

The SMB2 Protocol requires that "The first byte of the Direct TCP
transport packet header MUST be zero (0x00)"[1]. Commit 1c1bcf2d3ea0
("ksmbd: validate smb request protocol id") removed the validation of
this 1-byte zero. Add the validation back now.

[1]: [MS-SMB2] - v20230227, page 30.
https://winprotocoldoc.blob.core.windows.net/productionwindowsarchives/MS-SMB2/%5bMS-SMB2%5d-230227.pdf

Fixes: 1c1bcf2d3ea0 ("ksmbd: validate smb request protocol id")
Signed-off-by: Li Nan <linan122@huawei.com>
Acked-by: Tom Talpey <tom@talpey.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest/alsa - conf: Stringify the printed errno in sysfs_get()

[ Upstream commit fd38dd6abda589a8771e7872e4dea28c99c6a6ef ]

GCC 13.2.0 reported the warning of the print format specifier:

conf.c: In function ‘sysfs_get’:
conf.c:181:72: warning: format ‘%s’ expects argument of type ‘char *’, \
but argument 3 has type ‘int’ [-Wformat=]
  181 |                 ksft_exit_fail_msg("sysfs: unable to read value '%s': %s\n",
      |                                                                       ~^
      |                                                                        |
      |                                                                        char *
      |                                                                       %d

The fix passes strerror(errno) as it was intended, like in the sibling error
exit message.

Fixes: aba51cd0949ae ("selftests: alsa - add PCM test")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-5-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest/alsa - mixer-test: Fix the print format specifier warning

[ Upstream commit 3f47c1ebe5ca9c5883e596c7888dec4bec0176d8 ]

The GCC 13.2.0 compiler issued the following warning:

mixer-test.c: In function ‘ctl_value_index_valid’:
mixer-test.c:322:79: warning: format ‘%lld’ expects argument of type ‘long long int’, \
      but argument 5 has type ‘long int’ [-Wformat=]
  322 |                         ksft_print_msg("%s.%d value %lld more than maximum %lld\n",
      |                                                                            ~~~^
      |                                                                               |
      |                                                                               long long int
      |                                                                            %ld
  323 |                                        ctl->name, index, int64_val,
  324 |                                        snd_ctl_elem_info_get_max(ctl->info));
      |                                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |                                        |
      |                                        long int

Fixing the format specifier as advised by the compiler suggestion removes the
warning.

Fixes: 3f48b137d88e7 ("kselftest: alsa: Factor out check that values meet constraints")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-3-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()

[ Upstream commit 8c51c13dc63d46e754c44215eabc0890a8bd9bfb ]

Minor fix in the number of arguments to error reporting function in the
test program as reported by GCC 13.2.0 warning.

mixer-test.c: In function ‘find_controls’:
mixer-test.c:169:44: warning: too many arguments for format [-Wformat-extra-args]
  169 |                         ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n",
      |                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The number of arguments in call to ksft_exit_fail_msg() doesn't correspond
to the format specifiers, so this is adjusted resembling the sibling calls
to the error function.

Fixes: b1446bda56456 ("kselftest: alsa: Check for event generation when we write to controls")
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-sound@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107173704.937824-2-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()

[ Upstream commit c966dc0e9d96dc44423c404a2628236f1200c24e ]

gcc prints a warning about a possible array overflow for a couple of
callers of dp_decide_lane_settings() after commit 1b56c90018f0 ("Makefile:
Enable -Wstringop-overflow globally"):

drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c: In function 'dp_perform_fixed_vs_pe_training_sequence_legacy':
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c:426:25: error: 'dp_decide_lane_settings' accessing 4 bytes in a region of size 1 [-Werror=stringop-overflow=]
  426 |                         dp_decide_lane_settings(lt_settings, dpcd_lane_adjust,
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  427 |                                         lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings);
      |                                         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_fixed_vs_pe_retimer.c:426:25: note: referencing argument 4 of type 'union dpcd_training_lane[4]'

I'm not entirely sure what caused this, but changing the prototype to expect
a pointer instead of an array avoids the warnings.

Fixes: 7727e7b60f82 ("drm/amd/display: Improve robustness of FIXED_VS link training at DP1 rates")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init

[ Upstream commit 2f3be3ca779b11c332441b10e00443a2510f4d7b ]

The hwmgr->backend, (i.e. data) allocated by kzalloc is not freed in
the error-handling paths of smu7_get_evv_voltages and
smu7_update_edc_leakage_table. However, it did be freed in the
error-handling of phm_initializa_dynamic_state_adjustment_rule_settings,
by smu7_hwmgr_backend_fini. So the lack of free in smu7_get_evv_voltages
and smu7_update_edc_leakage_table is considered a memleak in this patch.

Fixes: 599a7e9fe1b6 ("drm/amd/powerplay: implement smu7 hwmgr to manager asics with smu ip version 7.")
Fixes: 8f0804c6b7d0 ("drm/amd/pm: add edc leakage controller setting")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c

[ Upstream commit 499839eca34ad62d43025ec0b46b80e77065f6d8 ]

Before using list_first_entry, make sure to check that list is not
empty, if list is empty return -ENODATA.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL?
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL?
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL?

Fixes: 0f28cca87e9a ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links")
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/iser: Prevent invalidating wrong MR

[ Upstream commit 2f1888281e67205bd80d3e8f54dbd519a9653f26 ]

The iser_reg_resources structure has two pointers to MR but only one
mr_valid field. The implementation assumes that we use only *sig_mr when
pi_enable is true. Otherwise, we use only *mr. However, it is only
sometimes correct. Read commands without protection information occur even
when pi_enble is true. For example, the following SCSI commands have a
Data-In buffer but never have protection information: READ CAPACITY (16),
INQUIRY, MODE SENSE(6), MAINTENANCE IN. So, we use
*sig_mr for some SCSI commands and *mr for the other SCSI commands.

In most cases, it works fine because the remote invalidation is applied.
However, there are two cases when the remote invalidation is not
applicable.
 1. Small write commands when all data is sent as an immediate.
 2. The target does not support the remote invalidation feature.

The lazy invalidation is used if the remote invalidation is impossible.
Since, at the lazy invalidation, we always invalidate the MR we want to
use, the wrong MR may be invalidated.

To fix the issue, we need a field per MR that indicates the MR needs
invalidation. Since the ib_mr structure already has such a field, let's
use ib_mr.need_inval instead of iser_reg_resources.mr_valid.

Fixes: b76a439982f8 ("IB/iser: Use IB_WR_REG_MR_INTEGRITY for PI handover")
Link: https://lore.kernel.org/r/20231219072311.40989-1-sergeygo@nvidia.com
Acked-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: sysfs: drop the mention of gpiochip_find() from sysfs code

[ Upstream commit e404b0cc9f0b0b551f3276a814d38abf1f26d98f ]

We have removed all callers of gpiochip_find() so don't mention it in
gpiolib-sysfs.c.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: 48e1b4d369cf ("gpiolib: remove the GPIO device from the list when it's unregistered")
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: provide gpio_device_find()

[ Upstream commit cfe102f63308c8c8e01199a682868a64b83f653e ]

gpiochip_find() is wrong and its kernel doc is misleading as the
function doesn't return a reference to the gpio_chip but just a raw
pointer. The chip itself is not guaranteed to stay alive, in fact it can
be deleted at any point. Also: other than GPIO drivers themselves,
nobody else has any business accessing gpio_chip structs.

Provide a new gpio_device_find() function that returns a real reference
to the opaque gpio_device structure that is guaranteed to stay alive for
as long as there are active users of it.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: 48e1b4d369cf ("gpiolib: remove the GPIO device from the list when it's unregistered")
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: make gpio_device_get() and gpio_device_put() public

[ Upstream commit 36aa129f221c9070afd8dff03154ab49702a5b1b ]

In order to start migrating away from accessing struct gpio_chip by
users other than their owners, let's first make the reference management
functions for the opaque struct gpio_device public in the driver.h
header.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 48e1b4d369cf ("gpiolib: remove the GPIO device from the list when it's unregistered")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix type of 'dbg_flags' in 'struct kfd_process'

[ Upstream commit 217e85f97031791fb48a2d374c7bdcf439365b21 ]

dbg_flags looks to be defined with incorrect data type; to process
multiple debug flag options, and hence defined dbg_flags as u32.

Fixes the below:

drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_packet_manager_v9.c:117 pm_map_process_aldebaran() warn: maybe use && instead of &

Fixes: 0de4ec9a0353 ("drm/amdgpu: prepare map process for multi-process debug devices")
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci_omap: Fix TI SoC dependencies

[ Upstream commit 09f164d393a6671e5ff8342ba6b3cb7fe3f20208 ]

The sdhci_omap is specific to  older TI SoCs, update the
dependencies for those SoCs and compile testing. While we're
at it update the text to reflect the wider range of
supported TI SoCS the driver now supports.

Fixes: 7d326930d352 ("mmc: sdhci-omap: Add OMAP SDHCI driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220135950.433588-2-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci_am654: Fix TI SoC dependencies

[ Upstream commit cb052da7f031b0d2309a4895ca236afb3b4bbf50 ]

The sdhci_am654 is specific to recent TI SoCs, update the
dependencies for those SoCs and compile testing. While we're
at it update the text to reflect the wider range of
supported TI SoCS the driver now supports.

Fixes: 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220135950.433588-1-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: scarlett2: Add clamp() in scarlett2_mixer_ctl_put()

[ Upstream commit 04f8f053252b86c7583895c962d66747ecdc61b7 ]

Ensure the value passed to scarlett2_mixer_ctl_put() is between 0 and
SCARLETT2_MIXER_MAX_VALUE so we don't attempt to access outside
scarlett2_mixer_values[].

Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/3b19fb3da641b587749b85fe1daa1b4e696c0c1b.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: scarlett2: Add missing error checks to *_ctl_get()

[ Upstream commit 50603a67daef161c78c814580d57f7f0be57167e ]

The *_ctl_get() functions which call scarlett2_update_*() were not
checking the return value. Fix to check the return value and pass to
the caller.

Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/32a5fdc83b05fa74e0fcdd672fbf71d75c5f0a6d.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: scarlett2: Allow passing any output to line_out_remap()

[ Upstream commit 2190b9aea4eb92ccf3176e35c17c959e40f1a81b ]

Line outputs 3 & 4 on the Gen 3 18i8 are internally the analogue 7 and
8 outputs, and this renumbering is hidden from the user by
line_out_remap(). By allowing higher values (representing non-analogue
outputs) to be passed to line_out_remap(), repeated code from
scarlett2_mux_src_enum_ctl_get() and scarlett2_mux_src_enum_ctl_put()
can be removed.

Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/3b70267931f5994628ab27306c73cddd17b93c8f.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 50603a67daef ("ALSA: scarlett2: Add missing error checks to *_ctl_get()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: scarlett2: Add missing error check to scarlett2_usb_set_config()

[ Upstream commit ca459dfa7d4ed9098fcf13e410963be6ae9b6bf3 ]

scarlett2_usb_set_config() calls scarlett2_usb_get() but was not
checking the result. Return the error if it fails rather than
continuing with an invalid value.

Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e15fae6c51a ("ALSA: usb-audio: scarlett2: Allow bit-level access to config")
Link: https://lore.kernel.org/r/def110c5c31dbdf0a7414d258838a0a31c0fab67.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: scarlett2: Add missing error check to scarlett2_config_save()

[ Upstream commit 5f6ff6931a1c0065a55448108940371e1ac8075f ]

scarlett2_config_save() was ignoring the return value from
scarlett2_usb(). As this function is not called from user-space we
can't return the error, so call usb_audio_err() instead.

Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/bf0a15332d852d7825fa6da87d2a0d9c0b702053.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5645: Drop double EF20 entry from dmi_platform_data[]

[ Upstream commit 51add1687f39292af626ac3c2046f49241713273 ]

dmi_platform_data[] first contains a DMI entry matching:

   DMI_MATCH(DMI_PRODUCT_NAME, "EF20"),

and then contains an identical entry except for the match being:

   DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"),

Since these are partial (non exact) DMI matches the first match
will also match any board with "EF20EA" in their DMI product-name,
drop the second, redundant, entry.

Fixes: a4dae468cfdd ("ASoC: rt5645: Add ACPI-defined GPIO for ECS EF20 series")
Cc: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: stm32: Fix enable count for clk in .probe()

[ Upstream commit 19f1016ea9600ed89bc24247c36ff5934ad94fbb ]

Make the driver take over hardware state without disabling in .probe()
and enable the clock for each enabled channel.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[ukleinek: split off from a patch that also implemented .get_state()]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm")
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: stm32: Use hweight32 in stm32_pwm_detect_channels

[ Upstream commit 41fa8f57c0d269243fe3bde2bce71e82c884b9ad ]

Use hweight32() to count the CCxE bits in stm32_pwm_detect_channels().
Since the return value is assigned to chip.npwm, change it to unsigned
int as well.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 19f1016ea960 ("pwm: stm32: Fix enable count for clk in .probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw

[ Upstream commit ee0cf5e07f44a10fce8f1bfa9db226c0b5ecf880 ]

Add missing comma and remove extraneous NULL argument. The macro is
currently used by no one which explains why the typo slipped by.

Fixes: 2d34f09e79c9 ("clk: fixed-rate: Add support for specifying parents via DT/pointers")
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231218-mbly-clk-v1-1-44ce54108f06@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: dispcc-sm8550: Update disp PLL settings

[ Upstream commit febd251d8775c4fb6e4acd6b5d7b0ed707f4611f ]

The settings in the driver seem to have been taken from an older
release. Update them to match the latest values.

Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-8-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8550: Mark RCGs shared where applicable

[ Upstream commit 929c75d575667af389c8a9e03cebc93d43bb7f31 ]

The vast majority of shared RCGs were not marked as such. Fix it.

Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-6-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8550: use collapse-voting for PCIe GDSCs

[ Upstream commit 7e77a39265293ea4f05e20fff180755503c49918 ]

The PCIe GDSCs can be shared with other masters and should use the APCS
collapse-vote register when updating the power state.

This is specifically also needed to be able to disable power domains
that have been enabled by boot firmware using the vote register.

Following other recent Qualcomm platforms, describe this register and
the corresponding mask for the PCIe (and _phy) GDSCs.

Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-5-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8550: Mark the PCIe GDSCs votable

[ Upstream commit e7fe73fc6b68ee97b1e8f124a66a5ee50d8d5e5b ]

The PCIe GDSCs on most Qualcomm platforms expect the OS to always
consider collapse requests as successful. This also concerns SM8550.

Add the VOTABLE flag to the GDSCs in question to comply with these
expectations.

Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-4-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag

[ Upstream commit 1fe8273c8d4088dd68faaab8640ec95f381cbf1e ]

All of the 8550's GCC GDSCs can and should use the retain registers so
as not to lose their state when entering lower power modes.

Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-3-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

accel/habanalabs: fix information leak in sec_attest_info()

[ Upstream commit a9f07790a4b2250f0140e9a61c7f842fd9b618c7 ]

This function may copy the pad0 field of struct hl_info_sec_attest to user
mode which has not been initialized, resulting in leakage of kernel heap
data to user mode. To prevent this, use kzalloc() to allocate and zero out
the buffer, which can also eliminate other uninitialized holes, if any.

Fixes: 0c88760f8f5e ("habanalabs/gaudi2: add secured attestation info uapi")
Signed-off-by: Xingyuan Mo <hdthky0@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: dp: Add phy_mtk_dp module as pre-dependency

[ Upstream commit c8048dd0b07df68724805254b9e994d99e9a7af4 ]

The mtk_dp driver registers a phy device which is handled by the
phy_mtk_dp driver and assumes that the phy probe will complete
synchronously, proceeding to make use of functionality exposed by that
driver right away. This assumption however is false when the phy driver
is built as a module, causing the mtk_dp driver to fail probe in this
case.

Add the phy_mtk_dp module as a pre-dependency to the mtk_dp module to
ensure the phy module has been loaded before the dp, so that the phy
probe happens synchrounously and the mtk_dp driver can probe
successfully even with the phy driver built as a module.

Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231121142938.460846-1-nfraprado@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tas2781: add support for FW version 0x0503

[ Upstream commit ee00330a5b78e2acf4b3aac32913da43e2c12a26 ]

Layout of FW version 0x0503 is compatible with 0x0502.
Already supported by TI's tas2781-linux-driver tree.
https://git.ti.com/cgit/tas2781-linux-drivers/tas2781-linux-driver/

Fixes: 915f5eadebd2 ("ASoC: tas2781: firmware lib")
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://msgid.link/r/98d4ee4e01e834af72a1a0bea6736facf43582e0.1702513517.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: vangogh: Drop conflicting ACPI-based probing

[ Upstream commit ddd1ee12a8fb6e4d6f86eddeba64c135eee56623 ]

The Vangogh machine driver variant based on the MAX98388 amplifier, as
found on Valve's Steam Deck OLED, relies on probing via an ACPI match
table.  This worked fine until commit 197b1f7f0df1 ("ASoC: amd: Add new
dmi entries to config entry") enabled SOF support for the target machine
(i.e. Galileo product), causing the sound card to enter the deferred
probe state indefinitely:

$ cat /sys/kernel/debug/devices_deferred
AMDI8821:00 acp5x_mach: Register card (acp5x-max98388) failed

The issue is related to commit e89f45edb747 ("ASoC: amd: vangogh: Add
check for acp config flags in vangogh platform"), which tries to
mitigate potential conflicts between SOF and generic ACP Vangogh
drivers, due to sharing the PCI device IDs.

However, the solution is effective only if the machine driver is
directly probed by pci-acp5x through platform_device_register_full().

Hence, remove the conflicting ACPI based probing and rely exclusively on
DMI quirks for sound card setup.

Fixes: dba22efd0d17 ("ASoC: amd: vangogh: Add support for NAU8821/MAX98388 variant")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://msgid.link/r/20231209203229.878730-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: si5341: fix an error code problem in si5341_output_clk_set_rate

[ Upstream commit 5607068ae5ab02c3ac9cabc6859d36e98004c341 ]

regmap_bulk_write() return zero or negative error code, return the value
of regmap_bulk_write() rather than '0'.

Fixes: 3044a860fd09 ("clk: Add Si5341/Si5340 driver")
Acked-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231101031633.996124-1-suhui@nfschina.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rs9: Fix DIF OEn bit placement on 9FGV0241

[ Upstream commit 29d861b5d29b6c80a887e93ad982cbbf4af2a06b ]

On 9FGV0241, the DIF OE0 is BIT(1) and DIF OE1 is BIT(2), on the other
chips like 9FGV0441 and 9FGV0841 DIF OE0 is BIT(0) and so on. Increment
the index in BIT() macro instead of the result of BIT() macro to shift
the bit correctly on 9FGV0241.

Fixes: 603df193ec51 ("clk: rs9: Support device specific dif bit calculation")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20231105200642.62792-1-marek.vasut+renesas@mailbox.org
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: rti_wdt: Drop runtime pm reference count when watchdog is unused

[ Upstream commit c1a6edf3b541e44e78f10bc6024df779715723f1 ]

Call runtime_pm_put*() if watchdog is not already started during probe and re
enable it in watchdog start as required.

On K3 SoCs, watchdogs and their corresponding CPUs are under same
power-domain, so if the reference count of unused watchdogs aren't
dropped, it will lead to CPU hotplug failures as Device Management
firmware won't allow to turn off the power-domain due to dangling
reference count.

Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213140110.938129-1-vigneshr@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: bcm2835_wdt: Fix WDIOC_SETTIMEOUT handling

[ Upstream commit f33f5b1fd1be5f5106d16f831309648cb0f1c31d ]

Users report about the unexpected behavior for setting timeouts above
15 sec on Raspberry Pi. According to watchdog-api.rst the ioctl
WDIOC_SETTIMEOUT shouldn't fail because of hardware limitations.
But looking at the code shows that max_timeout based on the
register value PM_WDOG_TIME_SET, which is the maximum.

Since 664a39236e71 ("watchdog: Introduce hardware maximum heartbeat
in watchdog core") the watchdog core is able to handle this problem.

This fix has been tested with watchdog-test from selftests.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217374
Fixes: 664a39236e71 ("watchdog: Introduce hardware maximum heartbeat in watchdog core")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231112173251.4827-1-wahrenst@gmx.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog/hpwdt: Only claim UNKNOWN NMI if from iLO

[ Upstream commit dced0b3e51dd2af3730efe14dd86b5e3173f0a65 ]

Avoid unnecessary crashes by claiming only NMIs that are due to
ERROR signalling or generated by the hpwdt hardware device.

The code does this, but only for iLO5.

The intent was to preserve legacy, Gen9 and earlier, semantics of
using hpwdt for error containtment as hardware/firmware would signal
fatal IO errors as an NMI with the expectation of hpwdt crashing
the system.  Howerver, these IO errors should be received by hpwdt
as an NMI_IO_CHECK.  So the test is overly permissive and should
not be limited to only ilo5.

We need to enable this protection for future iLOs not matching the
current PCI IDs.

Fixes: 62290a5c194b ("watchdog: hpwdt: Claim NMIs generated by iLO5")
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213215340.495734-2-jerry.hoemann@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: set cdev owner before adding

[ Upstream commit 38d75297745f04206db9c29bdd75557f0344c7cc ]

When the new watchdog character device is registered, it becomes
available for opening. This creates a race where userspace may open the
device before the character device's owner is set. This results in an
imbalance in module_get calls as the cdev_get in cdev_open will not
increment the reference count on the watchdog driver module.

This causes problems when the watchdog character device is released as
the module loader's reference will also be released. This makes it
impossible to open the watchdog device later on as it now appears that
the module is being unloaded. The open will fail with -ENXIO from
chrdev_open.

The legacy watchdog device will fail with -EBUSY from the try_module_get
in watchdog_open because it's module owner is the watchdog core module
so it can still be opened but it will fail to get a refcount on the
underlying watchdog device driver.

Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev")
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231205190522.55153-1-curtis.klein@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: clk: zynqmp: update divider round rate logic

[ Upstream commit 1fe15be1fb613534ecbac5f8c3f8744f757d237d ]

Currently zynqmp divider round rate is considering single parent and
calculating rate and parent rate accordingly. But if divider clock flag
is set to SET_RATE_PARENT then its not trying to traverse through all
parent rate and not selecting best parent rate from that. So use common
divider_round_rate() which is traversing through all clock parents and
its rate and calculating proper parent rate.

Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112916.23125-3-jay.buddhabhatti@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: clk: zynqmp: calculate closest mux rate

[ Upstream commit b782921ddd7f84f524723090377903f399fdbbcb ]

Currently zynqmp clock driver is not calculating closest mux rate and
because of that Linux is not setting proper frequency for CPU and
not able to set given frequency for dynamic frequency scaling.

E.g., In current logic initial acpu clock parent and frequency as below
apll1                  0    0    0  2199999978    0     0  50000      Y
    acpu0_mux          0    0    0  2199999978    0     0  50000      Y
        acpu0_idiv1    0    0    0  2199999978    0     0  50000      Y
            acpu0      0    0    0  2199999978    0     0  50000      Y

After changing acpu frequency to 549999994 Hz using CPU freq scaling its
selecting incorrect parent which is not closest frequency.
rpll_to_xpd            0    0    0  1599999984    0     0  50000      Y
    acpu0_mux          0    0    0  1599999984    0     0  50000      Y
        acpu0_div1     0    0    0   533333328    0     0  50000      Y
            acpu0      0    0    0   533333328    0     0  50000      Y

Parent should remain same since 549999994 = 2199999978 / 4.

So use __clk_mux_determine_rate_closest() generic function to calculate
closest rate for mux clock. After this change its selecting correct
parent and correct clock rate.
apll1                  0    0    0  2199999978    0     0  50000      Y
    acpu0_mux          0    0    0  2199999978    0     0  50000      Y
        acpu0_div1     0    0    0   549999995    0     0  50000      Y
            acpu0      0    0    0   549999995    0     0  50000      Y

Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231129112916.23125-2-jay.buddhabhatti@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sp7021: fix return value check in sp7021_clk_probe()

[ Upstream commit 1004c346a2b7393fce37dd1f320555e0a0d71e3f ]

devm_platform_ioremap_resource() never returns NULL pointer,
it will return ERR_PTR() when it fails, so replace the check
with IS_ERR().

Fixes: d54c1fd4a51e ("clk: Add Sunplus SP7021 clock driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20231128133016.2494699-1-yangyingliang@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: videocc-sm8150: Add missing PLL config property

[ Upstream commit 71f130c9193f613d497f7245365ed05ffdb0a401 ]

When the driver was ported upstream, PLL test_ctl_hi1 register value
was omitted. Add it to ensure the PLLs are fully configured.

Fixes: 5658e8cf1a8a ("clk: qcom: add video clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-3-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: videocc-sm8150: Update the videocc resets

[ Upstream commit 1fd9a939db24d2f66e48f8bca3e3654add3fa205 ]

Add all the available resets for the video clock controller
on sm8150.

Fixes: 5658e8cf1a8a ("clk: qcom: add video clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-2-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: clock: Update the videocc resets for sm8150

[ Upstream commit 3185f96968eedd117ec72ee7b87ead44b6d1bbbd ]

Add all the available resets for the video clock controller
on sm8150.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 1fd9a939db24 ("clk: qcom: videocc-sm8150: Update the videocc resets")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to check return value of f2fs_recover_xattr_data

[ Upstream commit 86d7d57a3f096c8349b32a0cd5f6f314e4416a6d ]

Should check return value of f2fs_recover_xattr_data in
__f2fs_setxattr rather than doing invalid retry if error happen.

Also just do set_page_dirty in f2fs_recover_xattr_data when
page is changed really.

Fixes: 50a472bbc79f ("f2fs: do not return EFSCORRUPTED, but try to run online repair")
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: fix a double-free in amdgpu_parse_extended_power_table

[ Upstream commit a6582701178a47c4d0cb2188c965c59c0c0647c8 ]

The amdgpu_free_extended_power_table is called in every error-handling
paths of amdgpu_parse_extended_power_table. However, after the following
call chain of returning:

amdgpu_parse_extended_power_table
  |-> kv_dpm_init / si_dpm_init
      (the only two caller of amdgpu_parse_extended_power_table)
        |-> kv_dpm_sw_init / si_dpm_sw_init
            (the only caller of kv_dpm_init / si_dpm_init, accordingly)
              |-> kv_dpm_fini / si_dpm_fini
                  (goto dpm_failed in xx_dpm_sw_init)
                    |-> amdgpu_free_extended_power_table

As above, the amdgpu_free_extended_power_table is called twice in this
returning chain and thus a double-free is triggered. Similarily, the
last kfree in amdgpu_parse_extended_power_table also cause a double free
with amdgpu_free_extended_power_table in kv_dpm_fini.

Fixes: 84176663e70d ("drm/amd/pm: create a new holder for those APIs used only by legacy ASICs(si/kv)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu/drm/radeon: fix two memleaks in radeon_vm_init

[ Upstream commit c2709b2d6a537ca0fa0f1da36fdaf07e48ef447d ]

When radeon_bo_create and radeon_vm_clear_bo fail, the vm->page_tables
allocated before need to be freed. However, neither radeon_vm_init
itself nor its caller have done such deallocation.

Fixes: 6d2f2944e95e ("drm/radeon: use normal BOs for the page tables v4")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/amd/pm: fix a use-after-free in kv_parse_power_table

[ Upstream commit 28dd788382c43b330480f57cd34cde0840896743 ]

When ps allocated by kzalloc equals to NULL, kv_parse_power_table
frees adev->pm.dpm.ps that allocated before. However, after the control
flow goes through the following call chains:

kv_parse_power_table
  |-> kv_dpm_init
        |-> kv_dpm_sw_init
      |-> kv_dpm_fini

The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its
first free in kv_parse_power_table and causes a use-after-free bug.

Fixes: a2e73f56fa62 ("drm/amdgpu: Add support for CIK parts")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: fix a double-free in si_dpm_init

[ Upstream commit ac16667237a82e2597e329eb9bc520d1cf9dff30 ]

When the allocation of
adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails,
amdgpu_free_extended_power_table is called to free some fields of adev.
However, when the control flow returns to si_dpm_sw_init, it goes to
label dpm_failed and calls si_dpm_fini, which calls
amdgpu_free_extended_power_table again and free those fields again. Thus
a double-free is triggered.

Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/debugfs: fix error code when smc register accessors are NULL

[ Upstream commit afe58346d5d3887b3e49ff623d2f2e471f232a8d ]

Should be -EOPNOTSUPP.

Fixes: 5104fdf50d32 ("drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Fix underrun in VDO1 when switches off the layer

[ Upstream commit 73b5ab27ab2ee616f2709dc212c2b0007894a12e ]

Do not reset Merge while using CMDQ because reset API doesn't
wait for frame done event as CMDQ does and could lead to
underrun when the layer is switching off.

Fixes: aaf94f7c3ae6 ("drm/mediatek: Add display merge async reset control")

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-23-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Remove the redundant driver data for DPI

[ Upstream commit 8ac6935e5689a491f0bec78fec732722b3dad094 ]

DPI input is in 1T2P mode on both MT8195 and MT8188.
Remove the redundant driver data to align the settings, or
the screen will glitch.

Fixes: 2847cd7e6403 ("drm/mediatek: Add mt8188 dpi compatibles and platform data")

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-22-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Return error if MDP RDMA failed to enable the clock

[ Upstream commit 21b287146adf39304193e4c49198021e06a28ded ]

Return the result of clk_prepare_enable() instead of
always returns 0.

Fixes: f8946e2b6bb2 ("drm/mediatek: Add display MDP RDMA support for MT8195")

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231214055847.4936-21-shawn.sung@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Drop enable and frame_count parameters from dpu_hw_setup_misr()

[ Upstream commit 3313c23f3eab698bc6b904520ee608fc0f7b03d0 ]

Drop the enable and frame_count parameters from dpu_hw_setup_misr() as they
are always set to the same values.

In addition, replace MISR_FRAME_COUNT_MASK with MISR_FRAME_COUNT as
frame_count is always set to the same value.

Fixes: 7b37523fb1d1 ("drm/msm/dpu: Move MISR methods to dpu_hw_util")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/572009/
Link: https://lore.kernel.org/r/20231213-encoder-fixup-v4-2-6da6cd1bf118@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Set input_sel bit for INTF

[ Upstream commit 980fffd0c69e5df0f67ee089d405899d532aeeab ]

Set the input_sel bit for encoders as it was missed in the initial
implementation.

Reported-by: Rob Clark <robdclark@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/39
Fixes: 91143873a05d ("drm/msm/dpu: Add MISR register support for interface")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/572007/
Link: https://lore.kernel.org/r/20231213-encoder-fixup-v4-1-6da6cd1bf118@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: rzg2l: Check reset monitor registers

[ Upstream commit da235d2fac212d0add570e755feb1167a830bc99 ]

The hardware manual of both RZ/G2L and RZ/G3S specifies that the reset
monitor registers need to be interrogated when the reset signals are
toggled (chapters "Procedures for Supplying and Stopping Reset Signals"
and "Procedure for Activating Modules").  Without this, there is a
chance that different modules (e.g. Ethernet) are not ready after their
reset signal is toggled, leading to failures (on probe or resume from
deep sleep states).

The same indications are available for RZ/V2M for TYPE-B reset controls.

Fixes: ef3c613ccd68 ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Fixes: 8090bea32484 ("clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: renesas: rzg2l-cpg: Reuse code in rzg2l_cpg_reset()

[ Upstream commit 5f9e29b9159a41fcf6733c3b59fa46a90ce3ae20 ]

Code in rzg2l_cpg_reset() is equivalent with the combined code of
rzg2l_cpg_assert() and rzg2l_cpg_deassert(). There is no need to have
different versions thus re-use rzg2l_cpg_assert() and rzg2l_cpg_deassert().

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120070024.4079344-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: da235d2fac21 ("clk: renesas: rzg2l: Check reset monitor registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-frontends: m88ds3103: Fix a memory leak in an error handling path of m88ds3103_probe()

[ Upstream commit 5b2f885e2f6f482d05c23f04c8240f7b4fc5bdb5 ]

If an error occurs after a successful i2c_mux_add_adapter(), then
i2c_mux_del_adapters() should be called to free some resources, as
already done in the remove function.

Fixes: e6089feca460 ("media: m88ds3103: Add support for ds3103b demod")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvbdev: drop refcount on error path in dvb_device_open()

[ Upstream commit a2dd235df435a05d389240be748909ada91201d2 ]

If call to file->f_op->open() fails, then call dvb_device_put(dvbdev).

Fixes: 0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to update iostat correctly in f2fs_filemap_fault()

[ Upstream commit bb34cc6ca87ff78f9fb5913d7619dc1389554da6 ]

In f2fs_filemap_fault(), it fixes to update iostat info only if
VM_FAULT_LOCKED is tagged in return value of filemap_fault().

Fixes: 8b83ac81f428 ("f2fs: support read iostat")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to check compress file in f2fs_move_file_range()

[ Upstream commit fb9b65340c818875ea86464faf3c744bdce0055c ]

f2fs_move_file_range() doesn't support migrating compressed cluster
data, let's add the missing check condition and return -EOPNOTSUPP
for the case until we support it.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to wait on block writeback for post_read case

[ Upstream commit 55fdc1c24a1d6229fe0ecf31335fb9a2eceaaa00 ]

If inode is compressed, but not encrypted, it missed to call
f2fs_wait_on_block_writeback() to wait for GCed page writeback
in IPU write path.

Thread A GC-Thread
- f2fs_gc
 - do_garbage_collect
  - gc_data_segment
   - move_data_block
    - f2fs_submit_page_write
     migrate normal cluster's block via
     meta_inode's page cache
- f2fs_write_single_data_page
 - f2fs_do_write_data_page
  - f2fs_inplace_write_data
   - f2fs_submit_page_bio

IRQ
- f2fs_read_end_io
IRQ
old data overrides new data due to
out-of-order GC and common IO.
- f2fs_read_end_io

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: st7701: Fix AVCL calculation

[ Upstream commit 799825aa87200ade1ba21db853d1c2ff720dcfe0 ]

The AVCL register, according to the datasheet, comes in increments
of -0.2v between -4.4v (represented by 0x0) to -5.0v (represented
by 0x3). The current calculation is done by adding the defined
AVCL value in mV to -4400 and then dividing by 200 to get the register
value. Unfortunately if I subtract -4400 from -4400 I get -8800, which
divided by 200 gives me -44. If I instead subtract -4400 from -4400
I get 0, which divided by 200 gives me 0. Based on the datasheet this
is the expected register value.

Fixes: 83b7a8e7e88e ("drm/panel/panel-sitronix-st7701: Parametrize voltage and timing")

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231208154847.130615-2-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208154847.130615-2-macroalpha82@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/adreno: Fix A680 chip id

[ Upstream commit 3e6688fd96966b6c275e95c39aa367bc0a490ccd ]

The only A680 referenced from DeviceTree is patch level 1, which since
commit '90b593ce1c9e ("drm/msm/adreno: Switch to chip-id for identifying
GPU")' isn't a known chip id.

Correct the chip id to allow the A680 to be recognized again.

Fixes: 90b593ce1c9e ("drm/msm/adreno: Switch to chip-id for identifying GPU")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/569839/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rkisp1: Fix media device memory leak

[ Upstream commit 452f604a4683654f4d9472b3126d8da61d748443 ]

Add missing calls to media_device_cleanup() to fix memory leak.

Link: https://lore.kernel.org/r/20231122-rkisp-fixes-v2-1-78bfb63cdcf8@ideasonboard.com
Fixes: d65dd85281fb ("media: staging: rkisp1: add Rockchip ISP1 base driver")
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dt-bindings: media: rkisp1: Fix the port description for the parallel interface

[ Upstream commit 25bf28b25a2afa1864b7143259443160d9163ea0 ]

The bus-type belongs to the endpoint's properties and should therefore
be moved.

Link: https://lore.kernel.org/r/20231115164407.99876-1-mehdi.djait@bootlin.com
Fixes: 6a0eaa25bf36 ("media: dt-bindings: media: rkisp1: Add port for parallel interface")
Signed-off-by: Mehdi Djait <mehdi.djait@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx-mipi-csis: Drop extra clock enable at probe()

[ Upstream commit fb387fcb5cdd0384ba04a5d15a3605e2dccdab2a ]

The driver always enables the clocks at probe() and disables them only
at remove(). It is not clear why the driver does this, as it supports
runtime PM, and enables and disables the clocks in the runtime resume
and suspend callbacks. Also, in the case runtime PM is not available,
the driver calls the resume and suspend callbacks manually from probe()
and remove().

Drop the unnecessary clock enable, thus enabling the clocks only when
actually needed.

Link: https://lore.kernel.org/r/20231122-imx-csis-v2-2-e44b8dc4cb66@ideasonboard.com
Fixes: 7807063b862b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imx-mipi-csis: Fix clock handling in remove()

[ Upstream commit 5705b0e0eb550ff834125a46a4ef99b62093d83d ]

The driver always calls mipi_csis_runtime_suspend() and
mipi_csis_clk_disable() in remove(). This causes multiple WARNs from the
kernel, as the clocks get disabled too many times.

Fix the remove() to call mipi_csis_runtime_suspend() and
mipi_csis_clk_disable() in a way that reverses what is done in probe().

Link: https://lore.kernel.org/r/20231122-imx-csis-v2-1-e44b8dc4cb66@ideasonboard.com
Fixes: 7807063b862b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: bttv: add back vbi hack

[ Upstream commit 3f1faa154a4316b1b585a25394697504b3c24e98 ]

The old (now removed) videobuf framework had an optional vbi hack where
the sequence number of the frame counter was copied in the last 4 bytes
of the buffer. This hack was active only for the read() interface
(so not for streaming I/O), and it was enabled by bttv. This allowed
applications that used read() for the VBI data to match it with the
corresponding video frame.

When bttv was converted to vb2 this hack was forgotten, but some old
applications rely on this.

So add this back, but this time in the bttv driver rather than in the
vb2 framework.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Tested-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: bttv: start_streaming should return a proper error code

[ Upstream commit 0d75bb6ae127f5e3fd0e2239714908fd2038193d ]

The start_streaming callback returned 0 or 1 instead of a
proper error code. Fix that.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gpucc-sm8150: Update the gpu_cc_pll1 config

[ Upstream commit 6ebd9a4f8b8d2b35cf965a04849c4ba763722f13 ]

Update the test_ctl_hi_val and test_ctl_hi1_val of gpu_cc_pll1
as per latest HW recommendation.

Fixes: 0cef71f2ccc8 ("clk: qcom: Add graphics clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231122042814.4158076-1-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix memory leak in free_mr_init()

[ Upstream commit 288f535951aa81ed674f5e5477ab11b9d9351b8c ]

When a reserved QP fails to be created, the memory of the remaining
created reserved QPs is leaked.

Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231207114231.2872104-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx231xx: fix a memleak in cx231xx_init_isoc

[ Upstream commit 5d3c8990e2bbf929cb211563dadd70708f42e4e6 ]

The dma_q->p_left_data alloced by kzalloc should be freed in all the
following error handling paths. However, it hasn't been freed in the
allocation error paths of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer.

On the other hand, the dma_q->p_left_data did be freed in the
error-handling paths after that of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer, by calling
cx231xx_uninit_isoc(dev). So the same free operation should be done in
error-handling paths of those two allocation.

Fixes: 64fbf4445526 ("[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358767: Fix return value on error case

[ Upstream commit 32bd29b619638256c5b75fb021d6d9f12fc4a984 ]

If the hpd_pin is invalid, the driver returns 'ret'. But 'ret' contains
0, instead of an error value.

Return -EINVAL instead.

Fixes: f25ee5017e4f ("drm/bridge: tc358767: add IRQ and HPD support")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-4-c22b2444f5f5@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: cdns-mhdp8546: Fix use of uninitialized variable

[ Upstream commit 155d6fb61270dd297f128731cd155080deee8f3a ]

'ret' could be uninitialized at the end of the function, although it's
not clear if that can happen in practice.

Fixes: 6a3608eae6d3 ("drm: bridge: cdns-mhdp8546: Enable HDCP")
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-3-c22b2444f5f5@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>