scsi: hisi_sas: relocate some common code for v3 hw

Much code of PM suspend function also exists in soft reset function. This
is not concise. So, this patch relocates the common code of these two
functions to a separate function.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: tidy host controller reset function a bit

This patch tidies host controller reset function by putting some code to
two new functions, and exports these two functions out, so that they could
be used by FLR feature to be realised.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Fix the failure of recovering PHY from STP link timeout

There is an issue that link reset can't recover PHY when STP link timeout.
Because current process of enabling PHY for v3 hw will wait last
transmission done. The time of one transmission depends IO size, disk model
and so on. Normally, it should be shorter than 50ms. But the last
transmission could be never done for some abnormal scenarios, such as STP
link timeout.

This patch is to fix the issue. Check PHY status after starting process of
enabling PHY for 50ms. If the PHY is still active, we disable it forcibly
by PHY reset. Of course, we need to clear the PHY reset bit when enable
PHY.

Besides, the function disable_phy_v3_hw() should not be suitable to call in
interrupts for hilink bug for this 50ms delay. Then, we do link reset for
hilink bug directly. The change is that we don't clear the invalid dword
count register. This is better. Because we should not clear such error
count while not saved.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: tidy channel interrupt handler for v3 hw

The ISR of channel interrupt of v3 hw is a little long and messy. This
patch tidies it by relocating CHL_INT1 and CHL_INT2 handling to new
function separately.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Drop hisi_sas_slot_abort()

For some time now we have not used hisi_sas_slot_abort() to handle erroring
slots, apart from in archaic v1 hw.

As such, remove this function and associated code. For v1 hw, move error
handling to same scheme as other hw revisions, where we allow erroring
commands to timeout.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: update ingress pack and pad boundary value

T5/T6 can have different pack and pad boundary value. This patch sets
packing boundary based on cache line size and PCI-E maximum payload size
and sets smallest padding boundary value.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arm64: defconfig: enable configs for Hisilicon ufs

Signed-off-by: Li Wei <liwei213@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arm64: dts: add ufs dts node

arm64: dts: add ufs node for Hisilicon.

Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: dt-bindings: add document for hisi-ufs

add ufs node document for Hisilicon.

Signed-off-by: Li Wei <liwei213@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: add Hisilicon ufs driver code

add Hisilicon ufs driver code.

Signed-off-by: Li Wei <liwei213@huawei.com>
Signed-off-by: Geng Jianfeng <gengjianfeng@hisilicon.com>
Signed-off-by: Zang Leigang <zangleigang@hisilicon.com>
Signed-off-by: Yu Jianfeng <steven.yujianfeng@hisilicon.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_debug: skip long delays when ndelay small

A test program's runtime became impractically long since any non zero
ndelay (e.g. 1 nanosec) caused Start Stop Unit to delay over 8 magnitudes
greater than other commands. This patch skips long delays (on Start Stop
Unit and Synchronize Cache) if ndelay is less than or equal to 10
microsecs.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: snic: fix printing time intervals

We don't want to use 'struct timespec' because of the y2038 overflow
problem. The overflow is not actually an issue here, but it's easy to
replace with 'timespec64' for consistency. However, it's worth pointing out
that nanosecond values have nine digits, not eight or ten, so I'm fixing
the format strings accordingly as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fcoe: hold disc_mutex when traversing rport lists

When calling either fc_rport_logon() or fc_rport_logoff() during rport list
traversal we cannot use the RCU list traversal, as either of these
functions will be taking a mutex.  So we need to partially revert commit
a407c593398c to take the disc mutex during traversal.  We should, however,
continue to use krefs to ensure that the rport object will not be freed
from under us.

Fixes: a407c593398c ("scsi: libfc: Fixup disc_mutex handling")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libfc: Add WARN_ON() when deleting rports

The discovery rport list handling is quite odd; the list traversal is
independent from the lifetime of the rport itself. This makes auditing
quite tricky, and the chance remains that we've missed something.  So this
patch adds a WARN_ON() statement when freeing an rport which is still part
of a list.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libfc: hold disc_mutex in fc_disc_stop_rports()

fc_disc_stop_rports() is calling fc_rport_logoff(), which in turn is
acquiring the rport mutex. So we cannot use RCU list traversal here, but
rather need to hold the disc mutex to avoid list corruption while
traversing.

Fixes: a407c593398c ("scsi: libfc: Fixup disc_mutex handling")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libfc: fixup lockdep annotations

fc_rport_recv_plogi_req() needs the lport mutex to be held; the rport mutex
will be acquired in the function itself.

Fixes: ee35624e1e4e ("scsi: libfc: Add lockdep annotations")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix for regression caused by sparse cleanups

Commit cf6bf9710cab ("scsi: mpt3sas: Bug fix for big endian systems") was
merged to address sparse warnings. However, the patch introduced a
regression on big endian since the code accidentally mixed I/O memory
accessors, which do endian swaps, and regular CPU loads and stores.

Do a partial revert of the offending commit.

[mkp: replaced commit message]

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arcmsr: Update driver version to v1.40.00.09-20180709

Update driver version to v1.40.00.09-20180709

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arcmsr: Fix error of resuming from hibernation for adapter type E

Fix error of resuming from hibernation for adapter type E.

Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: remove NCR_Q720 driver

The NCR QUAD 720 SCSI driver depends on microchannel support, but
microchannel support was removed from the kernel with commit bb8187d35f82
("MCA: delete all remaining traces of microchannel bus support.") over 6
years ago.

So zap the Q720 SCSI driver as well.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: remove NCR_D700 driver

The NCR DUAL 700 SCSI driver depends on microchannel support, but
microchannel support was removed from the kernel with commit bb8187d35f82
("MCA: delete all remaining traces of microchannel bus support.") over 6
years ago.

So zap the D700 SCSI driver as well.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ncr53c8xx: remove ScsiResult macro

Remove the ScsiResult macro and open code it on all call sites.

This will make subsequent refactoring in this area easier.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: remove ScsiResult macro

Remove the ScsiResult macro and open code it on all call sites.

This will make subsequent refactoring in this area easier.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: remove ScsiResult macro

Remove the ScsiResult macro and open code it on all call sites.

This will make subsequent refactoring in this area easier.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: remove AAC_STAT_GOOD define

Remove the AAC_STAT_GOOD definition and open code it in the places it was
used.

This will make subsequent refactoring in this area easier.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Dave Carroll <david.carroll@microsemi.com>
Cc: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libfc: fixup 'sleeping function called from invalid context'

fc_rport_login() will be calling mutex_lock() while running inside an
RCU-protected section, triggering the warning 'sleeping function called
from invalid context'.  To fix this we can drop the rcu functions here
altogether as the disc mutex protecting the list itself is already held,
preventing any list manipulation.

Fixes: a407c593398c ("scsi: libfc: Fixup disc_mutex handling")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libfc: Add lockdep annotations

Convert the free text locking notes into proper lockdep annotations.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: switch to scsi-mq by default

It has been more than one year since we tried to change the default from
legacy to multi queue in SCSI with commit c279bd9e406 ("scsi: default to
scsi-mq"). But due to issues with suspend/resume and performance problems
it had been reverted again with commit cbe7dfa26eee ("Revert "scsi: default
to scsi-mq"").

In the meantime there have been a substantial amount of performance
improvements and suspend/resume got fixed as well, thus we can re-enable
scsi-mq without a significant performance penalty.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mptfusion: mark expected switch fall-throughs

In preparation to enabling -Wimplicit-fallthrough, mark switch cases where
we are expecting to fall through.

Warning level 2 was used: -Wimplicit-fallthrough=2

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: sbitmap: add seq_file forward declaration

The target core runs into a warning in the linux/sbitmap.h
file in some configurations:

In file included from include/target/target_core_base.h:7,
                 from drivers/target/target_core_fabric_lib.c:41:
include/linux/sbitmap.h:331:46: error: 'struct seq_file' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
 void sbitmap_show(struct sbitmap *sb, struct seq_file *m);
                                              ^~~~~~~~

In general, headers should not depend on others being included first,
so this fixes it with a forward declaration for that struct name, but
we probably want to merge the patch through the scsi tree to help
bisection.

Fixes: 10e9cbb6b531 ("scsi: target: Convert target drivers to use sbitmap")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Revise copyright for new company language

Change references from "Broadcom Limited" to "Broadcom Inc." in the
copyright message. Update copyright duration if not yet updated for 2018.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: update driver version to 12.0.0.5

Update the driver version to 12.0.0.5

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: devloss timeout race condition caused null pointer reference

A race condition between the context of devloss timeout handler and I/O
completion caused devloss timeout handler de-referencing pointer that had
been released.

Added the check in lpfc_sli_validate_fcp_iocb() on LPFC_IO_ON_TXCMPLQ to
capture the race condition of I/O completion and devloss timeout handler
attemption for aborting the I/O. Also, added check on lpfc_cmd->rdata
pointer before de-referenceing lpfc_cmd->rdata->pnode.

Also, added protection in lpfc_sli_abort_iocb() routine on driver performed
FCP I/O FLUSHING already under way before proceeding to aborting I/Os.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix NVME Target crash in defer rcv logic

Kernel occasionally crashed with the following
ops on NVME Target:
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
  IP: [<ffffffffa042ee50>] lpfc_nvmet_defer_rcv+0x50/0x70 [lpfc]

Callback routine was called for deferred rcv when it should be treated as a
normal rcv.

Added code in callback routine to detect this condition and log a message,
then bail.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Support duration field in Link Cable Beacon V1 command

Current implementation missed setting the duration field. Correct the code
to set the field.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Make PBDE optimizations configurable

The PBDE optimizations aren't supported in all firmware revs.

Make optimizations configurable in case there's a side effect on old
firmware.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix abort error path for NVMET

rmmod of driver hangs

As driver instances were being unloaded, the NVME target port was unloaded
first. During the unload, the NVME initiator port sent a heartbeat
IO. Because of the target port state, that IO was scheduled for an Abort;
however, that abort subsequently failed. The failure was not cleaned up
properly and lpfc_sli4_xri_exchange_busy_wait silently hung forever.

Clean failed abort properly and make lpfc_sli4_xri_exchange_busy_wait not
hangs silently while waiting for aborts to complete.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix panic if driver unloaded when port is offline

System crashes when the lpfc module is unloaded after making the port
offline

The nvme queue pointers were freed during port offline, but were later
accessed in pci remove path.

Validate the pointers in pci remove path before accessing them.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix driver not setting dpp bits correctly in doorbell word

Driver is incorrectly formatting a register on new hardware, using a format
for an older chip. This can result in non-deterministic behavior.

Ensure driver is not setting "workqueue index" in the WQ doorbell when
making a non-dpp doorbell write. The field must be zero when non-dpp.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add Buffer overflow check, when nvme_info larger than PAGE_SIZE

Kernel crashes during fill_read_buffer when nvme_info sysfs file read.

With multiple NVME targets, approx 40, nvme_info may grow larger than
PAGE_SIZE bytes.  snprintf(buf + len, PAGE_SIZE - len, ...) logic is flawed
as PAGE_SIZE - len can be < 0 and is accepted by snprintf.  This results in
buffer overflow, and is detected with check from dev_attr_show and
fill_read_buffer.

Change to use scnprintf to a tmp array, before calling strlcat to ensure no
buffer overflow over PAGE_SIZE bytes.

Message "6314" created as a new message indicating when there is more nvme
info, but is truncated to fit within PAGE_SIZE bytes.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Remove se_dev_entry.ua_count

se_dev_entry.ua_count is only used to check whether or not
se_dev_entry.ua_list is empty. Use list_empty_careful() instead.  Checking
whether or not ua_list is empty without holding the lock that protects that
list is fine because the code that dequeues from that list will check again
whether or not that list is empty.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Fix handling of removed LUNs

Send a valid ASC / ASCQ combination back to the initiator if a SCSI command
is received after a LUN has been removed. This patch fixes the following
call trace:

WARNING: CPU: 0 PID: 4 at drivers/target/target_core_transport.c:3131 translate_sense_reason+0x164/0x190 [target_core_mod]
Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
RIP: 0010:translate_sense_reason+0x164/0x190 [target_core_mod]
Call Trace:
transport_send_check_condition_and_sense+0x95/0x1c0 [target_core_mod]
transport_generic_request_failure+0x102/0x270 [target_core_mod]
transport_generic_new_cmd+0x138/0x340 [target_core_mod]
transport_handle_cdb_direct+0x2f/0x80 [target_core_mod]
target_submit_cmd_map_sgls+0x212/0x2a0 [target_core_mod]
srpt_handle_new_iu+0x244/0x680 [ib_srpt]
__ib_process_cq+0x6d/0xc0 [ib_core]
ib_cq_poll_work+0x18/0x50 [ib_core]
process_one_work+0x20b/0x6a0
worker_thread+0x35/0x380
kthread+0x117/0x130
ret_from_fork+0x24/0x30

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Send unit attention condition even if the sense buffer is too small

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Do not duplicate the code that marks that a command has sense data

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target/tcm_loop: Avoid that static checkers warn about dead code

The code under the "release:" label can only be reached after se_cmd has
been set to a non-NULL value. Hence remove the if (se_cmd) test.  Keep the
else-part since calling transport_generic_free_cmd() is not necessary for a
command that has not been submitted to the core.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 4d3895d5ea43 ("target/tcm_loop: Merge struct tcm_loop_cmd and struct tcm_loop_tmr")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Remove second argument from fabric_make_tpg()

Since most target drivers do not use the second fabric_make_tpg() argument
("group") and since it is trivial to derive the group pointer from the wwn
pointer, do not pass the group pointer to fabric_make_tpg().

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target/iscsi: Make iscsit_ta_authentication() respect the output buffer size

Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers

Instead of calling __iscsit_free_cmd() from inside iscsit_aborted_task() if
a command has been aborted and from inside iscsit_free_cmd() if a command
has not been aborted, call __iscsit_free_cmd() from inside
lio_release_cmd(). The latter function is namely called for all commands
once the reference count has dropped to zero.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Varun Prakash <varun@chelsio.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Simplify the code for waiting for command completion

Instead of embedding the completion that is used for waiting for command
completion in struct se_cmd, let the context that waits for command
completion allocate it. This makes it possible to have a single code path
for non-aborted and aborted commands in target_release_cmd_kref() and
avoids that transport_generic_free_cmd() has to call
cmd->se_tfo->release_cmd() directly. This patch does not change any
functionality. Note: transport_generic_free_cmd() only waits until the
se_cmd reference count has reached zero after it has set both
CMD_T_FABRIC_STOP and CMD_T_ABORTED.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Simplify transport_generic_free_cmd() (2/2)

Since target_wait_free_cmd() skips TMFs with no associated LUN, it is safe
to call that function for such commands. Use this to simplify
transport_generic_free_cmd(). The only functional change in this patch is
that CMD_T_FABRIC_STOP gets set for TMFs with no associated LUN by
transport_generic_free_cmd().

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Simplify transport_generic_free_cmd() (1/2)

Move identical code outside an if/else statement. This patch does not
change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Fold core_tmr_handle_tas_abort() into transport_cmd_finish_abort()

For the two calls to transport_cmd_finish_abort() outside
core_tmr_handle_tas_abort() it is guaranteed that CMD_T_TAS is not set. Use
this property to fold core_tmr_handle_tas_abort() into
transport_cmd_finish_abort(). This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Simplify core_tmr_handle_tas_abort()

The code that can set CMD_T_TAS is executed by the same thread as the
thread that executes core_tmr_handle_tas_abort(). That means that no
locking is needed to check CMD_T_TAS from inside
core_tmr_handle_tas_abort(). This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Document when CMD_T_STOP and CMD_T_COMPLETE are set

Document those aspects of transport_cmd_check_stop_to_fabric() and
transport_generic_free_cmd() of which it is nontrivial to derive these from
their implementation.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Make the session shutdown code also wait for commands that are being aborted

Target drivers must call target_sess_cmd_list_set_waiting() and
target_wait_for_sess_cmds() before freeing a session. Since freeing a
session is only safe after all commands that are associated with a session
have finished, make target_wait_for_sess_cmds() also wait for commands that
are being aborted. Instead of setting a flag in each pending command from
target_sess_cmd_list_set_waiting() and waiting in
target_wait_for_sess_cmds() on a per-command completion, only set a
per-session flag in the former function and wait on a per-session
completion in the latter function. This change is safe because once a SCSI
initiator system has submitted a command a target system is always allowed
to execute it to completion. See also commit 0f4a943168f3 ("target: Fix
remote-port TMR ABORT + se_cmd fabric stop").

This patch is based on the following two patches:

* Bart Van Assche, target: Simplify session shutdown code, February 19, 2015
  (https://github.com/bvanassche/linux/commit/8df5463d7d7619f2f1b70cfe5172eaef0aa52815).

* Christoph Hellwig, target: Rework session shutdown code, December 7, 2015
  (http://thread.gmane.org/gmane.linux.scsi.target.devel/10695).

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Introduce transport_init_session()

Other than initializing xcopy_pt_sess.sess_wait_list, this patch does not
change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Rename transport_init_session() into transport_alloc_session()

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Move a list_del_init() statement

This patch does not change any functionality but makes the next patch
easier to read.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion

The approach for adding a device to the devices_idr data structure and for
removing it is as follows:

* &dev->dev_group.cg_item is initialized before a device is added to
  devices_idr.

* If the reference count of a device drops to zero then
  target_free_device() removes the device from devices_idr.

* All devices_idr manipulations are protected by device_mutex.

This means that increasing the reference count of a device is sufficient to
prevent removal from devices_idr and also that it is safe access
dev_group.cg_item for any device that is referenced by devices_idr. Use
this to modify target_find_device() and target_for_each_device() such that
these functions no longer introduce a dependency between device_mutex and
the configfs root inode mutex.

Note: it is safe to pass a NULL pointer to config_item_put() and also to
config_item_get_unless_zero().

This patch prevents that lockdep reports the following complaint:

======================================================
WARNING: possible circular locking dependency detected
4.12.0-rc1-dbg+ #1 Not tainted
------------------------------------------------------
rmdir/12053 is trying to acquire lock:
 (device_mutex#2){+.+.+.}, at: [<ffffffffa010afce>]
target_free_device+0xae/0xf0 [target_core_mod]

but task is already holding lock:
 (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>]
vfs_rmdir+0x50/0x140

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&sb->s_type->i_mutex_key#14){++++++}:
       lock_acquire+0x59/0x80
       down_write+0x36/0x70
       configfs_depend_item+0x3a/0xb0 [configfs]
       target_depend_item+0x13/0x20 [target_core_mod]
       target_xcopy_locate_se_dev_e4_iter+0x87/0x100 [target_core_mod]
       target_devices_idr_iter+0x16/0x20 [target_core_mod]
       idr_for_each+0x39/0xc0
       target_for_each_device+0x36/0x50 [target_core_mod]
       target_xcopy_locate_se_dev_e4+0x28/0x80 [target_core_mod]
       target_xcopy_do_work+0x2e9/0xdd0 [target_core_mod]
       process_one_work+0x1ca/0x3f0
       worker_thread+0x49/0x3b0
       kthread+0x109/0x140
       ret_from_fork+0x31/0x40

-> #0 (device_mutex#2){+.+.+.}:
       __lock_acquire+0x101f/0x11d0
       lock_acquire+0x59/0x80
       __mutex_lock+0x7e/0x950
       mutex_lock_nested+0x16/0x20
       target_free_device+0xae/0xf0 [target_core_mod]
       target_core_dev_release+0x10/0x20 [target_core_mod]
       config_item_put+0x6e/0xb0 [configfs]
       configfs_rmdir+0x1a6/0x300 [configfs]
       vfs_rmdir+0xb7/0x140
       do_rmdir+0x1f4/0x200
       SyS_rmdir+0x11/0x20
       entry_SYSCALL_64_fastpath+0x23/0xc2

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&sb->s_type->i_mutex_key#14);
                               lock(device_mutex#2);
                               lock(&sb->s_type->i_mutex_key#14);
  lock(device_mutex#2);

 *** DEADLOCK ***

3 locks held by rmdir/12053:
 #0:  (sb_writers#10){.+.+.+}, at: [<ffffffff811e223f>]
mnt_want_write+0x1f/0x50
 #1:  (&sb->s_type->i_mutex_key#14/1){+.+.+.}, at: [<ffffffff811cb97e>]
do_rmdir+0x15e/0x200
 #2:  (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>]
vfs_rmdir+0x50/0x140

stack backtrace:
CPU: 3 PID: 12053 Comm: rmdir Not tainted 4.12.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0x86/0xcf
 print_circular_bug+0x1c7/0x220
 __lock_acquire+0x101f/0x11d0
 lock_acquire+0x59/0x80
 __mutex_lock+0x7e/0x950
 mutex_lock_nested+0x16/0x20
 target_free_device+0xae/0xf0 [target_core_mod]
 target_core_dev_release+0x10/0x20 [target_core_mod]
 config_item_put+0x6e/0xb0 [configfs]
 configfs_rmdir+0x1a6/0x300 [configfs]
 vfs_rmdir+0xb7/0x140
 do_rmdir+0x1f4/0x200
 SyS_rmdir+0x11/0x20
 entry_SYSCALL_64_fastpath+0x23/0xc2

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
[Rebased to handle conflict withe target_find_device removal]
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Use config_item_name() instead of open-coding it

Some target code uses config_item_name() while other code accesses .ci_name
directly. Make the target code consistent by switching to
config_item_name().

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: fix scsi_host_queue_ready

328728630d9f ("scsi: avoid to hold host-wide counter of host_busy for
scsi_mq") adds one extra check on scsi_host_busy(shost) in
scsi_host_queue_ready(), which is wrong and not necessary, can causes
booting stall on LSI53c895A.

So remove the check.

Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 328728630d9f ("scsi: avoid to hold host-wide counter of host_busy for scsi_mq")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: klist: Make it safe to use klists in atomic context

In the scsi_transport_srp implementation it cannot be avoided to
iterate over a klist from atomic context when using the legacy block
layer instead of blk-mq. Hence this patch that makes it safe to use
klists in atomic context. This patch avoids that lockdep reports the
following:

WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&k->k_lock)->rlock);
                               local_irq_disable();
                               lock(&(&q->__queue_lock)->rlock);
                               lock(&(&k->k_lock)->rlock);
  <Interrupt>
    lock(&(&q->__queue_lock)->rlock);

stack backtrace:
Workqueue: kblockd blk_timeout_work
Call Trace:
 dump_stack+0xa4/0xf5
 check_usage+0x6e6/0x700
 __lock_acquire+0x185d/0x1b50
 lock_acquire+0xd2/0x260
 _raw_spin_lock+0x32/0x50
 klist_next+0x47/0x190
 device_for_each_child+0x8e/0x100
 srp_timed_out+0xaf/0x1d0 [scsi_transport_srp]
 scsi_times_out+0xd4/0x410 [scsi_mod]
 blk_rq_timed_out+0x36/0x70
 blk_timeout_work+0x1b5/0x220
 process_one_work+0x4fe/0xad0
 worker_thread+0x63/0x5a0
 kthread+0x1c1/0x1e0
 ret_from_fork+0x24/0x30

See also commit c9ddf73476ff ("scsi: scsi_transport_srp: Fix shost to
rport translation").

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd_zbc: Remove an assignment from sd_zbc_setup_report_cmnd()

Since nr_bytes == blk_rq_bytes(rq) == rq->__data_len, the
rq->__data_len = nr_bytes assignment does not modify the value of
rq->__data_len. Hence remove that assignment. Note: the code in
sd_done() that sets the residual to zero for zone report requests
is not affected by this patch.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: tidy up a size calculation

The id_tbl->table pointer points to unsigned long so static checkers
complain that instead of 4 we should be allocating sizeof(long) bytes.

We're trying to allocate enough bits for the bitmap.  The size variable is
always 1024.  (1024 / 32 * 4) is the same as (1024 / 64 * 8) so this
doesn't change runtime, but this is the more idiomatic way to do it and
makes the static checker happy.

[mkp: typo]

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvscsi: Improve strings handling

Currently an open firmware property is copied into partition_name variable
without keeping a room for \0.

Later one, this variable (partition_name), which is 97 bytes long, is
strncpyed into ibmvcsci_host_data->madapter_info->partition_name, which is
96 bytes long, possibly truncating it 'again' and removing the \0.

This patch simply decreases the partition name to 96 and just copy using
strlcpy() which guarantees that the string is \0 terminated. I think there
is no issue if this there is a truncation in this very first copy, i.e,
when the open firmware property is read and copied into the driver for the
very first time;

This issue also causes the following warning on GCC 8:

drivers/scsi/ibmvscsi/ibmvscsi.c:281:2: warning:  strncpy  output may be truncated copying 96 bytes from a string of length 96 [-Wstringop-truncation]
...
inlined from  ibmvscsi_probe  at drivers/scsi/ibmvscsi/ibmvscsi.c:2221:7:
drivers/scsi/ibmvscsi/ibmvscsi.c:265:3: warning:  strncpy  specified bound 97 equals destination size [-Wstringop-truncation]

CC: Bart Van Assche <bart.vanassche@wdc.com>
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: tcmu: Don't pass KERN_ERR to pr_err

Fix warning:

smatch warnings:
drivers/target/target_core_user.c:301 tcmu_genl_cmd_done() warn: KERN_*
level not at start of string

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: avoid host-wide host_busy counter for scsi_mq

It isn't necessary to check the host depth in scsi_queue_rq() any more
since it has been respected by blk-mq before calling scsi_queue_rq() via
getting driver tag.

Lots of LUNs may attach to same host and per-host IOPS may reach millions,
so we should avoid expensive atomic operations on the host-wide counter in
the IO path.

This patch implements scsi_host_busy() via blk_mq_tagset_busy_iter() for
reading the count of busy IOs for scsi_mq.

It is observed that IOPS is increased by 15% in IO test on scsi_debug (32
LUNs, 32 submit queues, 1024 can_queue, libaio/dio) in a dual-socket
system.

[mkp: clarified commit message]

Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: read host_busy via scsi_host_busy()

No functional change.

Just introduce scsi_host_busy() and replace the direct read of
scsi_host->host_busy with this new API.

Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Don Brace <don.brace@microsemi.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd: Remove a superfluous assignment

Since blk_rq_bytes(req) returns req->__data_len, assigning that value to
req->__data_len is superfluous. Hence remove that assignment.

See also commit 5db44863b6eb ("[SCSI] sd: Implement support for WRITE SAME").

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Fix misleading indentation

This patch avoids that smatch reports the following warnings:

drivers/scsi/qedi/qedi_fw_api.c:129: init_sqe() warn: inconsistent indenting
drivers/scsi/qedi/qedi_fw_api.c:137: init_sqe() warn: inconsistent indenting

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: QLogic-Storage-Upstream@cavium.com
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: don't add scsi command result bytes

Some drivers are ADDing the scsi command's result bytes instead of ORing
them.

While this can produce correct results it has unexpected side effects.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: check for equality of result byte values

When evaluating a SCSI command's result using the field access macros,
check for equality of the fields and not if a specific bit is set.

This is a preparation patch, for reworking the results field in the
SCSI command.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: scsi_io_completion convert BUGs to WARNs

The scsi_io_completion function contains three BUG() and BUG_ON() calls.
Replace them with WARN variants.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: scsi_io_completion hints on fastpath

Add likely() and unlikely() hints to conditionals on or near the fastpath.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: add scsi_io_completion_reprep helper

Since the action "reprep" is called from two places, rather than repeat the
code, make a new scsi_io_completion helper with "reprep" as its suffix.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: add scsi_io_completion_action helper

Place scsi_io_completion()'s complex error processing associated with a
local enumeration into a static helper function. That enumeration's values
start with "ACTION_" so use the suffix "_action" in the helper function's
name.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: add scsi_io_completion_nz_result function

Break out several intertwined paths when cmd->result is non zero and place
them in the scsi_io_completion_nz_result helper function. The logic is not
changed.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: scsi_io_completion: rename variables

Change and add some variable names, adjust some associated comments for
clarity. Correct some misleading comments.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: scsi_io_completion: comment on end_request return

scsi_end_request() is called multiple times from scsi_io_completion() which
branches on its bool returned value. Add comment before the static
definition of scsi_end_request() about the meaning of that return.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: remove target_find_device

target_find_device is no longer used, so remove it.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: tcmu: add module wide block/reset_netlink support

This patch based on Xiubo's patches adds 2 tcmu attr to block and reset the
netlink interface. It's used during userspace daemon reinitialization after
the daemon has crashed while there is outstanding nl requests. The daemon
can block the nl interface, kill outstanding requests in the kernel and
then reopen the netlink socket and unblock it to allow new requests.

[mkp: typo]

Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: tcmu: misc nl code cleanup

Some misc cleanup of the nl rework patches.

1. Fix space instead of tabs use and extra newline

2. Drop initializing variables to 0 when not needed

3. Just pass the skb_buff and msg_header pointers to
   tcmu_netlink_event_send.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: tcmu: simplify nl interface

Just return EBUSY if a nl request comes in while processing one. The upper
layers do not support sending multiple create/remove requests at the same
time (you cannot have a create and remove at the same time or do multiple
creates or removes at the same time) and doing a reconfig while a
create/remove is still executing does not make sense.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: tcmu: track nl commands

The next patch is going to fix the hung nl command issue so this adds a
list of outstanding nl commands that we can later abort when the daemon is
restarted.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: tcmu: delete unused __wait

When this code changed, this was never cleaned up.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: use monotonic timestamps for statistics

The get_seconds() function suffers from a possible overflow in 2038 or
2106, as well as jitter due to settimeofday or leap second updates, and is
deprecated.

As we are interested in elapsed time only, using ktime_get_seconds() to
read the CLOCK_MONOTONIC timebase is ideal here. This also lets us remove
the hack that tries to deal with get_seconds() going slightly backwards,
which cannot happen with montonic timestamps.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_transport_fc: use 64-bit timestamps consistently

The get_seconds() helper returns an 'unsigned long' value, which can
overflow on 32-bit architectures. Since the interface we pass it into
already uses a 64-bit type, we can just use ktime_get_real_seconds()
instead.

While we generally prefer local timestamps in CLOCK_MONOTONIC format
(ktime_get_seconds), this keeps using the CLOCK_REALTIME version in order
to maintain compatibility with existing code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: stop using deprated get_seconds()

get_seconds() can overflow on 32-bit architectures and is deprecated
because of that. The use in the aacraid driver has the same problem due to
a limited firmware interface, it also overflows in the year 2106.

This changes all calls to get_seconds() to the non-deprecated
ktime_get_real_seconds(), which unfortunately doesn't solve that problem
but gets rid of one user of the deprecated interface.

[mkp: checkpatch]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Change return type for fault handler

Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a distinct
type.

Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t")

Previously, VM_FAULT_NOPAGE was returned without verifying return value of
vm_insert_pfn. The new inline vmf_insert_pfn() will address this issue by
returning correct VM_FAULT_* type from fault handler.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: bump driver version to 1.1.4-130

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: fix critical ARM issue reading PQI index registers

Use the readl() kernel function to read all index registers. For ARM
systems, this function includes a read memory barrier that eliminates ci/pi
corruption.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Tested-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add inspur advantech ids

Add support for these new device IDs:

  Advantech MIC-8312BridgeB
  INSPUR PM8204-2GB
  INSPUR PM8204-4GB
  INSPUR PM8222-SHBA

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: improve error checking for sync requests

Detect rare error cases for synchronous requests down the RAID path.

Also retry INQUIRY of VPD page 0 sent to an HBA drive if the command failed
due to an abort.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: improve handling for sync requests

Decrement the active thread count after the synchronous request was
submitted to the controller but before the driver blocks to wait for the
request to complete.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Improve kernel-doc headers

Avoids that warnings about the kernel headers appear when building with
W=1. Remove useless "@Returns - Nothing" clauses. Change "@Return - " into
"Return: ".

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Split _base_reset_handler(), mpt3sas_scsih_reset_handler() and mpt3sas_ctl_reset_handler()

Split each of these functions in three functions - one function per reset
phase. This patch does not change any functionality but makes the code
easier to read.

Note: it is much easier to review the git diff -w output after having
applied this patch than by reviewing the patch itself.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix a race condition in mpt3sas_base_hard_reset_handler()

Since ioc->shost_recovery is set after ioc->reset_in_progress_mutex is
obtained, if concurrent resets are issued there is a short time during
which ioc->reset_in_progress_mutex is locked and ioc->shost_recovery ==
0. Avoid that this can cause trouble by unconditionally locking
ioc->shost_recovery.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix _transport_smp_handler() error path

This patch avoids that smatch complains about a double unlock on
ioc->transport_cmds.mutex.

Fixes: 651a01364994 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Introduce struct mpt3sas_nvme_cmd

Make _base_build_nvme_prp() easier to read by introducing a structure
to access NVMe command fields.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Annotate switch/case fall-through

This patch avoids that gcc complains about switch/case fall-through
when building with W=1.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>