Pengcheng Chen [Sat, 12 Oct 2019 09:25:45 +0000 (17:25 +0800)]
osd: set gxm afbc hardware reset correctly [1/1]
PD#SWPL-13524
Problem:
gxm afbc hardware reset is not set.
Solution:
set gxm afbc hardware reset correctly
Verify:
Verified on S912
Change-Id: Iccde705fe408852671d367f1b3853a7055bdf050
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
xian [Fri, 11 Oct 2019 11:02:51 +0000 (07:02 -0400)]
cec: fix tv cec wake up select source issue [6/6]
PD#SWPL-13135
Problem:
When tv is waked up by one playback, it may wake up the
other playback ans show the source.
Solution:
LiveTv should take care of the situation and make the right
choice with information provided by cec hal service.
Verify:
verify it on Marconi
Change-Id: Ic27cdf77f0796a659400f90f60190354235777f3
Signed-off-by: xian <an.xi@amlogic.com>
jian.zhou [Sat, 12 Oct 2019 06:30:39 +0000 (02:30 -0400)]
audio: t9015 DACL_EN and DACR_EN only enable once [1/1]
PD#SWPL-13728
Problem:
when enable DACL_EN and DACR_EN, it will has pop sound
Solution:
Only enable DACL_EN and DACR_EN once at probe function
Verify:
U212
Change-Id: I0f26977ad5d9b86df264069f8732ddb44615cc09
Signed-off-by: jian.zhou <jian.zhou@amlogic.com>
fahui.feng [Fri, 26 Apr 2019 02:14:59 +0000 (10:14 +0800)]
audio: add usb karaoke driver [1/1]
PD#OTT-1624
Problem:
doesn't support Karaoke
Solution:
1) add usb karaoke driver
2) Default karaoke is disable. if enable it,
add "CONFIG_AMLOGIC_SND_USB_CAPTURE_DATA=y" in defconfig file.
Verify:
p212
Change-Id: I9f00873da930f9d5924fc752133ed51a4ae93636
Signed-off-by: fahui.feng <fahui.feng@amlogic.com>
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Luan Yuan [Sat, 12 Oct 2019 10:58:14 +0000 (18:58 +0800)]
dts: increase i2c3 clock frequency to 300k [2/2]
PD#SWPL-13393
Problem:
demod init cost about 8s
Solution:
increase i2c3 clock frequency
Verify:
on s905x3
Change-Id: Id8c7ec326b5cfccb5ec3ea4c286b95860527082a
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Gongwei Chen [Sat, 12 Oct 2019 08:24:33 +0000 (16:24 +0800)]
dts: A311D W400 add camera os08a10 [1/1]
PD#SWPL-15086
Problem:
A311D W400 add camera os08a10
Solution:
A311D W400 add camera os08a10
Verify:
Verify by Android P w400
Change-Id: I60cdfe3996ee5bf54bfba24972c3e0c46005401a
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
yao liu [Sat, 12 Oct 2019 06:02:25 +0000 (14:02 +0800)]
dv: last frame display wrong [1/1]
PD#SWPL-14994
Problem:
when decoder released earlier than video layer
closed, new_dovi_setting.video_width is set to
0 and dovi_setting_video_flag is set to flase,
which leads to dv core1 closed.
Solution:
Since new_dovi_setting.video_width is update
every frame at parse_metadata, there is no need
to clear new_dovi_setting.video_width at reg/unreg
Verify:
SM1
Change-Id: Icf1b90340263cf0df1987d8b85d591a98276fd57
Signed-off-by: yao liu <yao.liu@amlogic.com>
Luan Yuan [Sat, 12 Oct 2019 10:55:04 +0000 (18:55 +0800)]
emmc: run hs400 200M on sm1 [1/1]
PD#SWPL-12424
Problem:
run hs400 166M on sm1 now
Solution:
modify dts
Verify:
no need
Change-Id: If3b888e57bd35205abf00af122b1ba63f458e14c
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Luan Yuan [Sat, 12 Oct 2019 10:52:23 +0000 (18:52 +0800)]
dts: mbox add video11 and video12 for screencontrol [1/2]
PD#SWPL-13022
Problem:
mbox needs to support screencontrol
Solution:
add video11 and video12 node
Verify:
no need for ac214
Change-Id: I9de86652f1e16be154354cf44ce47d072a037fe0
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Yong Qin [Sun, 29 Sep 2019 01:44:16 +0000 (09:44 +0800)]
cec: Add Feature for freeze mode power on [2/2]
PD#TV-10483
Problem:
Add feature for freeze mode power on by cec.
Solution:
Add feature for freeze mode power on by cec.
Verify:
tl1
Change-Id: I5be3d672f71a30ed4a7ab445de616023946596ff
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Brian Zhu [Wed, 9 Oct 2019 17:24:07 +0000 (01:24 +0800)]
vpp: set the sr position reg correctly [1/1]
PD#SWPL-14963
Problem:
The position bits of super scaler is incorrect.
Solution:
Set the position bits correctly
Verify:
Verified on U212
Change-Id: I133662859456f65e130b8795f574da845039c717
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Hang Cheng [Thu, 10 Oct 2019 08:49:23 +0000 (16:49 +0800)]
hdmirx: pinmux later so as to prevent abnormal hpd pulse [1/1]
PD#SWPL-15003
Problem:
There's a pull high pulse of hpd when bootup. Reason:
pinctl-names is set "default" in dts, when bootup,
hdmirx related pinmux will be set by device driver
which is before hdmirx probe. As hpd pin of ic is
default low, after reverse by triode, it will output
high on hdmi receptacle. And after hdmirx probe, hpd
invertion will be enabled before finally output from
ic, so it will become normally low again on hdmi
receptacle. So there's a pull high pulse(1~4ms) output.
Solution:
GPIOW is high(1.4V) before pinmux, so hpd pin of receptacle
is low before pinmux. Need to enable hpd invertion before
GPIOW is muxed to hpd function. the way to delay pinmux
is to change pinctrl-names of dts from default to others.
Verify:
TL1
Change-Id: Ica54484fa4c3da46e7b1ddc72a3c5f44fd4a71f6
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Brian Zhu [Thu, 10 Oct 2019 11:44:46 +0000 (19:44 +0800)]
amcsc: need force to send fake frame for matrix updating [1/1]
PD#SWPL-14947
Problem:
When switch the display mode of VIU1 from panel to hdmi. The
csc matrix did not update correctly without video on.
Solution:
Force to trigger a fake frame to update csc matrix correctly.
Verify:
Verified on u202
Change-Id: I3e75a2d396ee1c752ed30bf01852afc8b9499f41
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Nan Li [Sat, 12 Oct 2019 06:09:33 +0000 (14:09 +0800)]
sd: fix dts set err [1/1]
PD#SWPL-14953
Problem:
commit:
64ef52a0160d33a2aa88eff05a373bafc6d8637d
arm64 dts set err.
Solution:
modify it.
Verify:
sm1_ac200
Change-Id: Ida45806ec2232435d9d7b40f5286a46528f8ab73
Signed-off-by: Nan Li <nan.li@amlogic.com>
Yong Qin [Sat, 28 Sep 2019 02:54:01 +0000 (10:54 +0800)]
cec: Add Feature for freeze mode power on [1/2]
PD#TV-10483
Problem:
Add feature for freeze mode power on by cec.
Solution:
Add feature for freeze mode power on by cec.
Verify:
tl1
Change-Id: I3e0271cb000d64c4b30cfc75c59e8ca374993d7f
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Qiufang Dai [Thu, 26 Sep 2019 14:06:15 +0000 (22:06 +0800)]
suspend: fix freeze hangup which caused by insmod [1/1]
PD#TV-10472
Problem:
When system on, enter freeze mode lead to flush deferd probe.
Init.rc also run insmod in parallel, if insmod task
atomic_inc(&probe_count), and this task is freezed,
deadlock happends.
Solution:
Move flush deferd probe action before freeze task
Verify:
X32A0-T972
Change-Id: I8949db32aea14e2da37e77658a9c999af39e2c83
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Nan Li [Thu, 10 Oct 2019 07:31:59 +0000 (15:31 +0800)]
sd: add sd power cycle for sd3.0 [1/1]
PD#SWPL-14953
Problem:
SD card 3.0 mode requires power cycle.
if not, the initialization of SD card will be affected.
Solution:
add SD power cycle supported.
Verify:
sm1_ac200
Change-Id: Ic8aecadf3b63660adb74ff4ecf0a5d38037b579f
Signed-off-by: Nan Li <nan.li@amlogic.com>
Gongwei Chen [Fri, 11 Oct 2019 07:18:31 +0000 (15:18 +0800)]
dtsi: A311D w400 has only hdmi output by default, panel has no output [1/3]
PD#SWPL-15024
Problem:
A311D w400 has only hdmi output by default, panel has no output
Solution:
modify clk
Verify:
Verify by Android P w400
Change-Id: I90d2defc509de2e559bb1ae1f4fcbcf38012b93c
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Yong Qin [Fri, 11 Oct 2019 08:20:58 +0000 (16:20 +0800)]
vdin: Fix coverity error [1/1]
PD#SWPL-13987
Problem:
Fix coverity error.
Solution:
Fix coverity error.
Verify:
TL1
Change-Id: I5fec89f8980a4ea9b93e96e56dd857817695ad71
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yong Qin [Fri, 11 Oct 2019 02:19:31 +0000 (10:19 +0800)]
cec: Fix coverity error [1/1]
PD#SWPL-13936
Problem:
Fix coverity error.
Solution:
Fix coverity error.
Verify:
TL1
Change-Id: I3e1af9370b47c1c9e06634f6cd4d04b2a229d664
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
MingLiang Dong [Thu, 10 Oct 2019 09:31:07 +0000 (17:31 +0800)]
hdr: fix tl1 hdr no effect [1/1]
PD#SWPL-12751
Problem:
1. tl1 hdr no effect
2. alway print [amvideo..] saturation_pre:0 hue_pre:0 mab:1000000
Solution:
1. seprate vd1/vd2 hdr process
2. fix vd2 metadata random change
Verify:
verify on TL1
Change-Id: I4d88b5b8758095ae90b2d2c06480bd9726e2cad1
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Bencheng Jing [Wed, 11 Sep 2019 03:46:35 +0000 (11:46 +0800)]
amvecm: fix pc/game mode not close saturation [1/1]
PD#SWPL-13896
Problem:
pc/game mode not close saturation
Solution:
add close saturation patch for chip after g12a
Verify:
verified by tl1
Change-Id: I28fe34d0b14700132e92a75ea8d8a7836ed7fd2b
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Gongwei Chen [Thu, 10 Oct 2019 11:10:14 +0000 (19:10 +0800)]
dts: add platform W200 [2/3]
PD#SWPL-15005
Problem:
need add platform W200
Solution:
add platform W200
Verify:
Verify by Android P w200
Change-Id: Ia1baacb5c62182fd17c4e1730a4ad6aeeaa71dda
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
yao liu [Wed, 9 Oct 2019 08:16:44 +0000 (04:16 -0400)]
dv: screen highlighting when playing some videos [1/1]
PD#SWPL-13043
Problem:
Too many prints cause the active line to be
too large when entering the DV process,
resulting in the LUT table of DV core1 not
being written completely
Solution:
Simplify printing in DV
Verify:
sm1
Change-Id: I4fd06f6a8b5e6d0b973077bbe92815224834857b
Signed-off-by: yao liu <yao.liu@amlogic.com>
MingLiang Dong [Wed, 25 Sep 2019 14:56:25 +0000 (10:56 -0400)]
amvecm: fix contrast adj without uv shift [1/1]
PD#SWPL-14629
Problem:
fix contrast adj without uv shift
Solution:
workaround with vd1 mtx, add uv shift the same gain with your
Verify:
verify on TL1
Change-Id: I5456b75463ff2c999a8e6d4b42129a909ecfd666
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Evoke Zhang [Wed, 9 Oct 2019 02:52:38 +0000 (10:52 +0800)]
cvbsout: fix cgms bit mistake for NTSC [1/1]
PD#OTT-5683
Problem:
NTSC cgms data bit is incorrect
Solution:
fix cgms bit mistake
Verify:
u212
Change-Id: If1d26714eeed9061773c25871715713b122d9980
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
changqing.gao [Wed, 18 Sep 2019 03:03:10 +0000 (11:03 +0800)]
ramdump: support ramdump for tm2 [3/3]
PD#SWPL-13275
Problem:
ramdump is not enabled on tm2.
Solution:
Add ramdump support on tm2 in kernel.
Verify:
verified on tm2_t962x3_ab301_v1.
Change-Id: I1e8fd2e14ba1bc02e47c6e15c534da449352b723
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
shaochan.liu [Fri, 27 Sep 2019 10:04:50 +0000 (18:04 +0800)]
lcd: optimize ss_set in power_step [2/2]
PD#TV-10240
Problem:
need optimize ss_set in power_step
Solution:
optimize ss_set in power_step
Verify:
t962x2-x301
Change-Id: I435e5659cbc7225cc957d2fa233c5dee70f894a2
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Pengcheng Chen [Tue, 8 Oct 2019 09:10:38 +0000 (17:10 +0800)]
osd: fix exit hdr play,screen flash for osd hdr matrix not sync [1/1]
PD#SWPL-14902
Problem:
Play HDR video locally, after exiting, the screen flashes 1, 2 seconds
Solution:
set rdma_hdr_delay default value to 0
Verify:
Verified by T962-P321
Change-Id: I9c0a56332e38d1238129e682535f588104faf8be
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Lei Yang [Sun, 29 Sep 2019 07:18:06 +0000 (15:18 +0800)]
hdmirx: modify recovery flow for aud_pll error [1/1]
PD#SWPL-14776
Problem:
aud pll is zero. need to reset aud bandgap
Solution:
modify related recovery flow
Verify:
TXLX
Change-Id: If8ba596cb7bec81165a0b2f80aa388579cc68411
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
zhiwei.yuan [Tue, 8 Oct 2019 07:26:08 +0000 (15:26 +0800)]
vdin: [side-effect]hdmi 4k,garbage is seen at the bottom [1/1]
PD#SWPL-14760
Problem:
There's no enough mem for screen cap
Solution:
Inc mem only for HDMI 4k afbce
Verify:
verified by t962x2_x301
Change-Id: I688bc67f5b9f754ae3db9fa650778cf36eec18dc
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Bencheng Jing [Thu, 16 May 2019 05:50:02 +0000 (13:50 +0800)]
amvecm: fix sat_hue_post ioctrl set error [1/1]
PD#SWPL-14583
Problem:
1.fix sat_hue_post ioctrl set error
2.fix brightness2 set error
Solution:
fix sat_hue_post ioctrl set error
Verify:
u212
Change-Id: I181840fabfec6a3625056ffa95f62d8e50730129
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Evoke Zhang [Wed, 25 Sep 2019 09:58:57 +0000 (17:58 +0800)]
tvafe: reinit tvafe when atv demod rescan [1/1]
PD#SWPL-14610
Problem:
121.25MHz PAL-M Recognized to NTSC-M
Solution:
add reinit tvafe function for atv demod rescan
Verify:
x301
Change-Id: I8d303374f3e1e6e3c84e81d4332735b6687df01b
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
robin zhu [Tue, 1 Oct 2019 03:16:32 +0000 (20:16 -0700)]
dv: flash when start playing dv [1/1]
PD#SWPL-14836
Problem:
1) video enable flag is not update correctly
2) source format not update correctly,
which cause wrong dv control path reset
3) when start play video off and repeat frame,
triggers wrong fake sdr frame
Solution:
1) change video enable flag to use both
video_global_output and video_enabled
2) use latest src format insdead of using cur format
3) add repeat frame and video on to off flag to
prevent wrong fake sdr frame
Verify:
Verified on AC213
Change-Id: Ia8ee7bea0b8bcb33e18275611287e0b563caf978
Signed-off-by: robin zhu <robin.zhu@amlogic.com>
Xingyu Chen [Wed, 9 Oct 2019 02:34:55 +0000 (10:34 +0800)]
wdt: add option to avoid the wdt is disabled casually [1/1]
PD#SWPL-14925
Problem:
The system can't be reset by wdt which is fed by the tv-service
when the tv-service is abnormally hanged.
Solution:
Add extra option to avoid the wdt is disabled when the fed dog
thread aborts, but we can disable wdt when certain condition is
met.
Verify:
test pass on customer board
Change-Id: I1fd5ff4e36f06bda99726c0a2ced399299596f95
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
nengwen.chen [Sun, 29 Sep 2019 11:22:36 +0000 (19:22 +0800)]
atv_demod: fix atv non_std_en == 4 [1/1]
PD#TV-10383
Problem:
fix atv non_std_en == 4.
Solution:
1.fix atv non_std_en == 4.
Verify:
Verified by x301
Change-Id: I25286d1f1472411fcc37255eaef80436ed0f2c26
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Pengcheng Chen [Fri, 6 Sep 2019 08:52:07 +0000 (16:52 +0800)]
dv: fix one picture displayed playing mvc when dv is on [1/1]
PD#SWPL-13590
Problem:
only one picture displayed playing 3D mvc when dv is on
Solution:
when playing 3D mvc bypass dv.
Verify:
Verified by u212
Change-Id: I73c85808b7aad91a009b1e80f2514545e96eedf2
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Xing Wang [Wed, 25 Sep 2019 02:24:14 +0000 (10:24 +0800)]
audio: auge: toddr irq interrupt protection for freeze mode [1/1]
PD#TV-10448
Problem:
crash when finished early supend but not entry suspend,
the system is waked up
Solution:
add toddr irq interrupt protection when entry suspend
and exit from suspend
Verify:
x301
Change-Id: I7ade7a745511bab83c70b5649b6af318163568d9
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Xihai Zhu [Fri, 27 Sep 2019 02:24:33 +0000 (22:24 -0400)]
amvecm: fix coverity issue detected [1/1]
PD#SWPL-14679
Problem:
coverity issue detected, logical operation
is wrongly used for bit operation
Solution:
update related code
Verify:
tl1
Change-Id: I3b98e702205382dabe4b0cd75f9586cac1bccd48
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Brian Zhu [Mon, 30 Sep 2019 10:41:33 +0000 (18:41 +0800)]
dv: need update the right osd size for core2 [1/1]
PD#SWPL-14748
Problem:
DV core2 did not update the osd size.
Solution:
monitor the osd size change in dv processing
Verify:
Verifed on U212
Change-Id: Icade183483bd0f12f3d1d5424b38ac97ac1c83d1
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Xihai Zhu [Wed, 25 Sep 2019 02:06:51 +0000 (22:06 -0400)]
amvecm: LC input matrix impovement [1/1]
PD#SWPL-14555
Problem:
there is luma level drop issue while
on/off LC module
Solution:
per VLSI suggestion, use same VPP standard
matrix, and also handle the bitdepth option
correctly
Verify:
tl1
Change-Id: I5450c60dc055ec6493327b77e1295e55e6405fe7
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Chuangcheng Peng [Mon, 16 Sep 2019 06:30:56 +0000 (14:30 +0800)]
dvb: support two si2168(si2151/av2018) [2/3]
PD#SWPL-13198
Problem:
support U212-D814
Solution:
support U212-D814
Verify:
verify at u212-D814
Change-Id: I2c458b36fc2bee08ddd24e2da016a68515bb82da
Signed-off-by: Chuangcheng Peng <chuangcheng.peng@amlogic.com>
zhiwei.yuan [Fri, 27 Sep 2019 09:46:52 +0000 (17:46 +0800)]
vdin: hdmi 4k,garbage is seen at the bottom [1/1]
PD#SWPL-14760
Problem:
afbce write need more memory since block can not be separater
Solution:
increase memory size for each frame
Verify:
verified by t962x2_x301
Change-Id: I5a80d0d6f22ef72353bf8b9faa904ec4f4b7c7aa
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Lei Yang [Sun, 29 Sep 2019 10:03:35 +0000 (18:03 +0800)]
hdmirx: revert commit 86761 [1/1]
PD#SWPL-14763
Problem:
rx cannot work after suspend
Solution:
rx22 memory issue. revert related commit.
Verify:
TL1
Change-Id: Ia3a092e2fc602470e4ffc54f0d3b25ae0221f69f
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
zhiwei.yuan [Wed, 25 Sep 2019 08:22:43 +0000 (16:22 +0800)]
vdin: TvPlayer ANR when screen capture [1/1]
PD#SWPL-14561
Problem:
caused by enc v line check mechanism
Solution:
remove line check since it's unnecessary
Verify:
verified by t962x2_x301
Change-Id: Ic2578b99234ac001baf2e12314119e6a01b0a79c
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Qianggui Song [Sun, 29 Sep 2019 10:55:08 +0000 (18:55 +0800)]
ir: cannot wakeup system when keep pressing power key [1/1]
PD#SWPL-14797
Problem:
In freeze mode, keep press power key won't wake up system.
Solution:
replace pm_wakup_event with pm_stay_awake
Verify:
tl1
Change-Id: I5b88714ff45034280ec1d638f86b51fa54e2a011
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Jiamin Ma [Mon, 30 Sep 2019 00:35:00 +0000 (08:35 +0800)]
page_trace: fix compile error [1/1]
PD#SWPL-14800
Problem:
Compile error
Solution:
Fix compile error
Verify:
Compile pass
Change-Id: Iffb95fef1572e4ce17ec80f0765920b8afad8513
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Xingyu Chen [Tue, 24 Sep 2019 05:15:15 +0000 (13:15 +0800)]
key: fix wakeup issues of gpiokey and adckey in freeze mode [1/1]
PD#SWPL-14597
Problem:
- it is risky to replace directly system_freezable_wq with system_wq
for input poll device.
- the system can't be awakened by gpiokey or adckey when system in
freeze mode.
Solution:
- because of the input poll-device can't compatible freeze mode, we
replace it with input device.
- perfect wakeup operation when system works in freeze mode.
Verify:
test pass on ac200
Change-Id: I81c867da7325480712aa5903289e02ebb20d6f07
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
nengwen.chen [Sun, 29 Sep 2019 03:03:43 +0000 (11:03 +0800)]
atv_demod: adds check exit status when scanning [2/2]
PD#TV-10574
Problem:
adds check exit status when scanning.
Solution:
1.adds check exit status when scanning.
Verify:
Verified by x301.
Change-Id: If7ab459a4554d5c0f70b3048956781ea015dbf2e
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Zongdong Jiao [Tue, 24 Sep 2019 13:42:35 +0000 (21:42 +0800)]
hdmitx: reduce the delay time of plugout [1/1]
PD#OTT-6369
Problem:
The HPD low time of some Monitor(such as LG) is about 30ms, less than 100ms
Solution:
Reduce the delay time of plugout
Verify:
G12A/U212
Change-Id: I343223b5ef0696da035f0b3b179bdbfbce68c859
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Zhizhong Zhang [Fri, 27 Sep 2019 09:22:01 +0000 (17:22 +0800)]
Audio: Intermittently sluggish video observed on few channels [3/3]
PD#OTT-5171
Problem:
Intermittently sluggish video observed on few channels
Solution:
Don't change pcr when setting apts in pcrmaster mode
Verify:
patch build of U212
Change-Id: I393c3ea8504b95c63edfd1b5acdb89f9ee754f25
Signed-off-by: Zhizhong Zhang <zhizhong.zhang@amlogic.com>
gerrit autosubmit [Sun, 29 Sep 2019 08:02:08 +0000 (01:02 -0700)]
Merge "slab: trace for each slab object [1/1]" into amlogic-4.9-dev
yao liu [Fri, 27 Sep 2019 09:56:44 +0000 (05:56 -0400)]
dv: osd icon display colored dots at 720p50hz [1/2]
PD#SWPL-14463
Problem:
dv vertical potch is small
Solution:
increase vpotch from 0x30 to 0x38
Verify:
verify on sm1 720p.
Change-Id: Iebf6708f62a8b8c2a32accf9ef721b4d12fa2370
Signed-off-by: yao liu <yao.liu@amlogic.com>
Evoke Zhang [Thu, 26 Sep 2019 08:31:21 +0000 (16:31 +0800)]
amvecm: add viu2 vsync support for gamma [1/1]
PD#SWPL-14450
Problem:
gamma can't support viu2 vsync
Solution:
add viu2 vsync support for gamma
Verify:
u202
Change-Id: I5f490b254f58a130451ff69a456c218e6e4dcc94
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Brian Zhu [Thu, 26 Sep 2019 18:01:46 +0000 (02:01 +0800)]
vpp: use the correct sr0 max width [1/1]
PD#SWPL-14306
Problem:
When sr0 v scaler is enabled or not, the sr0 max width
is incorrectly.
Solution:
Using the correct sr0 max width.
Verify:
Verified by u212
Change-Id: Id5e0b66f0878676536be0e0970fe8f26419b978c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Bichao Zheng [Thu, 12 Sep 2019 07:17:46 +0000 (15:17 +0800)]
irblaster: meson: fix Coverity errors [1/2]
PD#SWPL-13973
Problem:
irblaster Coverity errors.
Solution:
1. Properly release resources.
2. Fix return value type.
Verify:
test pass on g12a_u200_v1
Change-Id: I50054ba3ac9f02aeeaa005b7823416b1c4c9a196
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>
baocheng sun [Thu, 26 Sep 2019 07:41:42 +0000 (03:41 -0400)]
ion: ion_sync_for_device use swiotlb_dma_ops not dummy_dma_ops [1/1]
PD#OTT-5276
Problem:
CTS EncodeDecodeTest failed. Ion sync ioctrl was
forwarded to a dummy implementation. So cached dma buffer
syncing between device and driver was inconsistent occasionally.
Solution:
Changed the dummy_dma_ops to swiotbl_dma_ops when ion_sync_for_device
Verify:
franklin, hertz
Change-Id: I16863bba6c3fe16b9c3b2b410ade6e45c9e74826
Signed-off-by: baocheng sun <baocheng.sun@amlogic.com>
shuanglong.wang [Mon, 23 Sep 2019 08:37:08 +0000 (16:37 +0800)]
video: clear omx_pts_set_index when session switch [1/1]
PD#SWPL-13597
Problem:
av diff over 200ms after seek when test AL1 ep sync
Solution:
clear omx_pts_set_index when session switch that new playback, drop
old index, new index will update asap when set_omx_pts invoked.
Verify:
verify by skb nts
Change-Id: I5f46338d46524ceb9a4e907cf9db07ff2e373a08
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Jianxin Pan [Fri, 27 Sep 2019 11:48:59 +0000 (04:48 -0700)]
Merge "vad: enable tm2 vad wakeup [2/2]" into amlogic-4.9-dev
yao liu [Thu, 5 Sep 2019 11:12:38 +0000 (07:12 -0400)]
dv: dolby tv core need bitmatch [1/1]
PD#SWPL-6655
Problem:
tm2 tvcore not bitmatch
Solution:
1.Config VIU_VD1_FMT_CTRL for tm2
2.Config DIAG_CTRL, CRC_CTRL and CM_CRC reg for tm2
3.Config DOLBY_PATH_CTRL for tm2
Verify:
Verified on tm2
Change-Id: I56a086c498ed4d3bf2f43a4639c79546072d586b
Signed-off-by: yao liu <yao.liu@amlogic.com>
Brian Zhu [Wed, 11 Sep 2019 19:39:26 +0000 (03:39 +0800)]
vpp: improve the csc and dv switch flow and policy [1/1]
PD#SWPL-13990
Problem:
There are some conflicts between csc and dv module switching.
Can not switch to SDR->DV when HDR core is working on SDR->SDR mode.
Solution:
1. Improve the switching policy. DV and csc will use same on.
2. add mute operation under dv mode.
Verify:
Verified on AC211
Change-Id: I4d59328fc34228a0ef5275d22643932c4dfe00b0
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Bencheng Jing [Wed, 25 Sep 2019 08:52:39 +0000 (16:52 +0800)]
amvecm: add lc enable/disable in pc mode [1/1]
PD#SWPL-12580
Problem:
pcmode can not disable lc
Solution:
add lc enable/disable in pc mode
Verify:
verified by tl1
Change-Id: Ie8f7ff84549cd42efef550ecd7adf6d959ff5a4f
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Lei Yang [Tue, 24 Sep 2019 12:37:22 +0000 (20:37 +0800)]
hdmirx: add repeater22 [1/1]
PD#SWPL-12503
Problem:
TM2 cannot support repeater22
Solution:
add repreater2.2
Verify:
TM2
Change-Id: Idda626632641939dccab79bf3d958e8f2c462c82
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
yao liu [Thu, 26 Sep 2019 10:28:09 +0000 (06:28 -0400)]
dv: osd icon display colored dots at 720p [1/1]
PD#SWPL-14463
Problem:
OSD hold line changed from 4 to 8, dv vertical
potch should be adjusted accordingly.
Solution:
increase vpotch from 0x20 to 0x30.
Verify:
verify on sm1 720p.
Change-Id: I33779829cb80ce34c5596081a7591278e214d347
Signed-off-by: yao liu <yao.liu@amlogic.com>
yunhua.wei [Tue, 10 Sep 2019 03:32:16 +0000 (11:32 +0800)]
audio: change spdif input audio stuttering [1/1]
PD#SH-1182
Problem:
change spdif input audio stuttering
Solution:
Change the log level from pr_info to pr_debug
Verify:
A113D
Change-Id: I44eb6d4453dddff7a1e8e4e2345603aa292ba161
Signed-off-by: yunhua.wei <yunhua.wei@amlogic.com>
Xiaoming Sui [Sat, 21 Sep 2019 09:36:28 +0000 (17:36 +0800)]
avsync: tsync: fix avsync issues when dtv play [2/2]
PD#TV-10253
Problem:
PD#TV-10253, SWPL-12816
dtv play when pcr is invalid, avsync is lost sometimes.
Solution:
add some specific marginal checks.
Verify:
X301
Change-Id: I2115bc934cd87d8a93c77180f4f37f1d23fa23ba
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
yicheng shen [Wed, 25 Sep 2019 11:18:05 +0000 (07:18 -0400)]
hdmirx: fix hdcp2.2 request_mem_region fail issue [1/1]
PD#SWPL-14563
Problem:
hdcp_rx22 passed a wrong HPI address to hdmirx driver,
and cause HPI address request_mem_region fail
Solution:
Use the correct HPI address when request_mem_region called.
Verify:
TL1
Change-Id: I80bd6323ae4959edf3c792758568c581024536bb
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Jihong Sui [Wed, 25 Sep 2019 08:00:45 +0000 (16:00 +0800)]
deinterlace: pq: mtn use different setting for 480i [1/1]
PD#SWPL-14550
Problem:
deinterlance1-Chapter#1 in sony test pattern,
the "ok" display abnormal.
Solution:
from yanling(VLSI), bencheng.jing
change mxcmbY from 1 to 3;
add combing_bias_motion_setting and
combing_very_motion_setting for 480i;
Verify:
x301
Change-Id: Ida2b432af80a2bd5937f13b3f7a4a030b9b0cfaa
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Tao Zeng [Fri, 2 Aug 2019 08:32:22 +0000 (16:32 +0800)]
slab: trace for each slab object [1/1]
PD#TV-8287
Problem:
Slab memleak is hard to track;
Solution:
Add slab trace to fix it
Verify:
P212
Change-Id: Ie1c44f28d5539c7bf71f9825c617c36af65d8058
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
qi duan [Wed, 25 Sep 2019 07:31:39 +0000 (03:31 -0400)]
eth: compatible internal phy enet efuse map for some chip [1/1]
PD#SWPL-14596
Problem:
some g12a chip,efuse map for enet is diff
So need compatible for these chip
Solution:
read valid bit from valid block,not data block
Verify:
verified by tl1 and g12a
Change-Id: I564209d865cbc2ff1151df07d06593b12ea225d8
Signed-off-by: qi duan <qi.duan@amlogic.com>
changqing.gao [Wed, 18 Sep 2019 05:41:05 +0000 (13:41 +0800)]
iomap: fix coverity errors [1/1]
PD#SWPL-13972
Problem:
iomap Coverity errors.
Solution:
1. remove verbose code.
2. check return value.
Verify:
test pass on tm2_ab301_v1
Change-Id: Ib8c2baaae63d3c6454ffa45a0c353a6dd9de0787
Signed-off-by: changqing.gao <changqing.gao@amlogic.com>
Jihong Sui [Tue, 24 Sep 2019 02:39:41 +0000 (10:39 +0800)]
deinterlace: pq: fix combing_fix_en can not change [1/1]
PD#SWPL-11557
Problem:
Some scenes flicker badly, such as the roof
Solution:
The modification requirements come from,
yanling(VLSI), bencheng.jing
a. patch 62052:
need change mtn parameter back to old for local 1080i;
b. patch 71464:
need fix combing_fix_en can not change;
Verify:
x301
Change-Id: I3e067930f0e4dea9f300e888a6ee3f96caf987fb
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
robin zhu [Fri, 20 Sep 2019 04:03:07 +0000 (21:03 -0700)]
video: dv: DV SDK, DRM infoframe in GBR order [1/1]
PD#SWPL-13874
Problem:
DV sdk test, for sdr/hdr/dv to hdr cases
DRM infoframe primaries in GBR order
Solution:
DV enable, send primaries in RGB order
Verify:
None
Change-Id: I0229179592203aba5e2a388a572b0061fa21a48f
Signed-off-by: robin zhu <robin.zhu@amlogic.com>
Hang Cheng [Tue, 24 Sep 2019 06:12:27 +0000 (14:12 +0800)]
hdmitx: force to update glitch time after hdcp22 unmux [1/1]
PD#SWPL-11894
Problem:
glitch time in bl31 may not be updated after hdcp22 unmux,
because get hdcp auth result function in bl31 will not be
called after hdcp mode set to 0. In a result, the glitch
hdcp22 result may take place of the actual hdcp22 auth
status after mode change, and feedback to systemcontrol
to clear/set video mute by wrong
Solution:
force to update glitch time after hdcp22 unmux
Verify:
U200/g12a
Change-Id: I497ead5f8f5c46959560ffc0c8702acca1a3f46c
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
jinrong.liao [Mon, 23 Sep 2019 03:32:12 +0000 (11:32 +0800)]
dts: add county and langurage prop for gva [1/1]
PD#SH-875
Problem:
add county and langurage prop via unifykey for gva
Solution:
add county and langurage prop via unifykey for gva
Verify:
S420
Change-Id: Icf5f7c3f44d93fbcaf2be3410e0c04289549c555
Signed-off-by: jinrong.liao <jinrong.liao@amlogic.com>
Evoke Zhang [Wed, 18 Sep 2019 02:02:25 +0000 (10:02 +0800)]
tvafe: update 0x125 setting for tl1 av ntsc-m/pali [1/1]
PD#SWPL-14271
Problem:
av pali green block dark in colorbar left bottom corner
Solution:
update 0x125 setting for tl1 av ntsc-m/pali
Verify:
x301
Change-Id: Icb759a39c1265ac043b888b55f3ccaf12661cafe
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Qiufang Dai [Tue, 24 Sep 2019 13:59:47 +0000 (21:59 +0800)]
freeze: add IRQF_NO_SUSPEND for ir irq flag for avoid wakeup by any IR key
PD#TV-10438
Problem:
system can be wake up by any IR key
Solution:
Add IRQF_NO_SUSPEND to avoid IR interrupt being seen as wakeup source IRQ
When IR irq check current key is power key, then send pm_wakeup_event()
Verify:
X32A0-T972
Change-Id: I753fe15f859480954bb569f2da3d3e0dd93c29e3
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Tao Zeng [Wed, 18 Sep 2019 06:19:27 +0000 (14:19 +0800)]
ramdump: not set sticky register if ramdump disabled [1/1]
PD#TV-1924
Problem:
Sticky register which control compress in bl2z will always be set
if ramdump driver probed.
Solution:
If ramdump is disabled by envrioment under uboot. sticky register
should not set for not enter compress under bl2z
Verify:
x301
Change-Id: I1f41c98cebf7957f0dc214046e6d011e08c326de
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
shaochan.liu [Wed, 11 Sep 2019 06:03:03 +0000 (14:03 +0800)]
lcd: add lcd_init_level to control lcd display [2/2]
PD#TV-9856
Problem:
need change display driver for cool boot to enter
kernel stage freeze mode
Solution:
add lcd_panel_ctrl to control lcd display
Verify:
t962x2-x301
Change-Id: I8b58ab0a0f87c49791af7dddf7b05db37f7ad716
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Cao Jian [Thu, 19 Sep 2019 03:38:57 +0000 (11:38 +0800)]
picdec: fix no scale mode, frame stretch [1/1]
PD#SWPL-14477
Problem:
the picture is rotated 90 degrees,
stretching left and right
Solution:
modify conditions for frame width or height
equal to screen width or height
Verify:
verify by g12b-w400
Change-Id: I0ca9cc255b202306562bee69726400c697f3b053
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
he.he [Thu, 29 Aug 2019 11:09:28 +0000 (07:09 -0400)]
usb: xHCI host not responding to stop endpoint command [1/1]
PD#SWPL-14053
Problem:
Read and write simultaneously on two disks on a hub,
and then the XHCI controller would halted.
Solution:
Set the GUCTL1 BIT 17 to 1 for disable park mode.
Verify:
test pass on u200, ODROID-N2
Change-Id: I007804fa6b97a103da4a05be12c1193b9dd422cb
Signed-off-by: he.he <he.he@amlogic.com>
Xingyu Chen [Thu, 12 Sep 2019 03:04:08 +0000 (11:04 +0800)]
iio: adc: coverity defect cleanup [1/1]
PD#SWPL-13967
Problem:
unchecked return value of regmap_write
Solution:
to check the return value
Verify:
test pass on g12a
Change-Id: Ibb45e36d7c24f0e0ea8b14da75e887321ee5b791
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Jihong Sui [Fri, 20 Sep 2019 08:03:44 +0000 (16:03 +0800)]
deinterlace: fix suspend di cause undefined instruction [1/1]
PD#SWPL-14418
Problem:
DI issue causes platform crash to restart
when do DTV 2s channel switch+15s suspend
Solution:
use active_flg to protect tasklet_schedule
Verify:
tl1
Change-Id: I91028a039d8b1799b131a953bef4877f70a2f697
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Rui Wang [Thu, 19 Sep 2019 02:33:53 +0000 (10:33 +0800)]
video: fix video axis no changes when enable hold video [1/1]
PD#TV-10251
Problem:
PE190005-1038 press the OK button switching to
the ATV channel, the screen is not full screen.
Solution:
After the video property changes, if the hold video
is enabled, the current frame needs to be refreshed.
Verify:
Verified with X301
Change-Id: I05cb7255147b1950cb6b9d5813148a9ce0aa6e66
Signed-off-by: Rui Wang <rui.wang@amlogic.com>
yao liu [Tue, 17 Sep 2019 10:39:24 +0000 (06:39 -0400)]
dv: display abnormal when seeking [1/1]
PD#SWPL-13834
Problem:
Dropping dv frame triggers parser_matedata which updates
the new_dovi_setting. Before rendering the first frame,
keep frame is displayed. However, keep frame requires
toggle, which updates the dovi_setting from new_dovi_setting,
causing color error in keep frame
Solution:
Dropping frame don't update new_dovi_setting
Verify:
passed on sm1
Change-Id: I1c73ba6f7d192066e3d5f9439ccbedc6d610d6eb
Signed-off-by: yao liu <yao.liu@amlogic.com>
Bencheng Jing [Thu, 19 Sep 2019 05:58:28 +0000 (13:58 +0800)]
amvecm: fix pure black scene adjust contrast affected brightness [1/1]
PD#SWPL-14319
Problem:
adjust the contrast in full range
Solution:
change to limit range
Verify:
verified by tl1
Change-Id: Icfa3c128c2943e30f2710dad5181c1d85dd32095
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
nengwen.chen [Fri, 20 Sep 2019 05:49:44 +0000 (13:49 +0800)]
atv_demod: fix first sound carrier output in nicam system [1/1]
PD#TV-9972
Problem:
first sound carrier no output in nicam system.
Solution:
1.fix first sound carrier output in nicam system.
Verify:
Verified by TL1.
Change-Id: Ib89b6a5300a1ebeb9e61bbb3acb6356e2abab08f
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Jihong Sui [Mon, 16 Sep 2019 11:35:32 +0000 (19:35 +0800)]
deinterlace: vpp: change mc update flow [1/1]
PD#SWPL-14142
Problem:
display abnormal after play 1 hour.
this is because rdma can't been called in two thread.
mc update bit in hw timer, this causes pps's register
to be set incorrectly.
Solution:
call mc update function in video.c
Verify:
txlx
Change-Id: I750aa5c242a1077691f82c3b2361ee46b3202313
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jihong Sui [Mon, 16 Sep 2019 03:20:43 +0000 (11:20 +0800)]
deinterlace: optimize reset/light unreg flow [1/1]
PD#SWPL-14059
Problem:
video stuck after reset or light unreg.
Solution:
optimize reset/light unreg flow
Verify:
G12A
Change-Id: I982ef4ee618a25d0b562f70b5e7df0fad2d87278
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jihong Sui [Tue, 17 Sep 2019 11:50:40 +0000 (19:50 +0800)]
deinterlace: delete reg_req_flag_irq to avoid failed reg. [1/1]
PD#SWPL-14260
Problem:
variable reg_req_flag_irq is redundant and
it has a probability of causing error reg.
Solution:
delete this variable.
Verify:
tl1
Change-Id: I807f32789acdf4b8e0fea88f9786a301638460ff
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
yao liu [Fri, 20 Sep 2019 01:56:22 +0000 (21:56 -0400)]
dv: display green when hotplug hdmi after boot [1/1]
PD#SWPL-14323
Problem:
Kernel and uboot is not sync: When kernel startup
without hdmi,dolby_vision_on is not set to true
even if dv is on in uboot. This lead to dv core
can't turn off when bypass dv in sdr->sdr case.
Solution:
Regardless of connecting to hdmi, as long as uboot
turn on dv, set dolby_vision_on up
Verify:
verify on sm1
Change-Id: I704c833c0b099637ea08b255b6cd380199ea0148
Signed-off-by: yao liu <yao.liu@amlogic.com>
Tao Zeng [Tue, 17 Sep 2019 07:00:12 +0000 (15:00 +0800)]
vmap: fix wrong mmu setting in check sp funciton [1/1]
PD#TV-9668
Problem:
If sp address is in linear mapping range, check_sp_fault_again
function in vmap fault handler will still map a new page for it.
This will cause some data in R/W section polluted.
Solution:
Avoid map page if sp is in linear range.
Verify:
TL1 x301
Change-Id: I0e02a2048b586854c528cd3eeafb725751b9dc82
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Tao Zeng [Thu, 12 Sep 2019 08:46:06 +0000 (16:46 +0800)]
event: restore watch point after cpu pm event [1/1]
PD#TV-9668
Problem:
After cpu idle enabled, watch point event register will be cleared
if cpu exit pm(idle). This will cause watch point can't work.
Solution:
re-enable watch point after cpu exit pm(idle)
Verify:
TL1
Change-Id: I4fc2002eaabecd4c5e60a5916bc29e0107882bec
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Xing Wang [Thu, 19 Sep 2019 06:29:58 +0000 (14:29 +0800)]
audio: auge: fix kcontrol chip info [1/1]
PD#SWPL-14331
Problem:
mixer "HDMI ARC Source" crashes when bootup
Solution:
fix kcontrol chip info
Verify:
x301
Change-Id: I2f2d66acbbd4092a5cbbe4c108d5ae928f0f0ccc
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Cao Jian [Tue, 17 Sep 2019 08:52:36 +0000 (16:52 +0800)]
osd: modify VPP_OSD_SC_DUMMY_DATA alpha conditions [1/1]
PD#SWPL-14256
Problem:
When ATV Mode has no signal
the bright line interference at the bottom
if freescale height is set to vinfo height
Solution:
modify VPP_OSD_SC_DUMMY_DATA alpha value
Verify:
verified on txlx-r311
Change-Id: I48bbb1be533a88e8b3c622550a0a2e8c07f2a863
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
nengwen.chen [Wed, 18 Sep 2019 05:11:57 +0000 (13:11 +0800)]
atv_demod: remove 44.25 repeat try signal [1/1]
PD#TV-10334
Problem:
1.remove 44.25MHz repeat try signal.
Solution:
1.remove 44.25MHz repeat try signal.
Verify:
Verified by x301
Change-Id: I76608f76885f555dfa5849e8e9016757736c2de8
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Xihai Zhu [Thu, 19 Sep 2019 02:04:02 +0000 (22:04 -0400)]
amvecm: add addr protect for register program [1/1]
PD#SWPL-14333
Problem:
invalid address is allowed for register program
which cause kernel panic
Solution:
add protection, programming on invalid addr will
be terminated
Verify:
tl1
Change-Id: I44bedec256ee5c386b53188fb2d8e40ae8c3f553
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Qianggui Song [Wed, 11 Sep 2019 09:22:50 +0000 (17:22 +0800)]
ir: fix coverity unchecked return value issue [1/1]
PD#SWPL-13969
Problem:
In sysfs.c, return value of class_register is not checked.
Solution:
check return value of class_register
Verify:
local coverity check
Change-Id: If8deb3e388e784650e4812257143c3ac919c2d9a
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Xing Wang [Fri, 9 Aug 2019 07:30:08 +0000 (15:30 +0800)]
audio: auge: add eARC_TX/ARC_TX driver for tm2 [1/1]
PD#SWPL-12654
Problem:
eARCTX/ARCTX function for tm2
Solution:
add eARCTX/ARCTX driver for tm2
add extcon for earc tx connection
optimize eARC RX with regmap
Verify:
ab311
Change-Id: I61f44950af9e200f698372ad4f17457785a6255a
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Xing Wang [Thu, 16 May 2019 13:43:26 +0000 (21:43 +0800)]
audio: update eARC_RX/ARC_RX driver [1/1]
PD#SWPL-6863
Problem:
eARCRX/ARCRX function for sm1/tm2
Solution:
add eARCRX/ARCRX driver for sm1/tm2
plug in/out HDMI cable, notify user space current attended type
Verify:
tested on ac200, ab311
Change-Id: I0332723ef9c9d45f7797df38a7077561fddb13bf
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
projects / platform / kernel / linux-amlogic.git / log