Veerendranath Jakkam [Sat, 30 Jul 2022 05:26:43 +0000 (10:56 +0530)]
wifi: cfg80211: Add link_id parameter to various key operations for MLO
Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to driver for add_key,
get_key, del_key, set_default_key, set_default_mgmt_key and
set_default_beacon_key to support configuring keys specific to each MLO
link. Userspace must not specify link ID for MLO pairwise key since it
is common for all the MLO links.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Veerendranath Jakkam [Sat, 30 Jul 2022 05:26:42 +0000 (10:56 +0530)]
wifi: cfg80211: Prevent cfg80211_wext_siwencodeext() on MLD
Currently, MLO support is not added for WEXT code and WEXT handlers are
prevented on MLDs. Prevent WEXT handler cfg80211_wext_siwencodeext()
also on MLD which is missed in commit
7b0a0e3c3a88 ("wifi: cfg80211: do
some rework towards MLO link APIs")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-3-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Veerendranath Jakkam [Sat, 30 Jul 2022 05:26:41 +0000 (10:56 +0530)]
wifi: cfg80211: reject connect response with MLO params for WEP
MLO connections are not supposed to use WEP security. Reject connect
response of MLO connection if WEP security mode is used.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-2-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Wed, 17 Aug 2022 08:44:05 +0000 (10:44 +0200)]
wifi: mac80211: fix use-after-free
We've already freed the assoc_data at this point, so need
to use another copy of the AP (MLD) address instead.
Fixes:
81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Shaul Triebitz [Tue, 2 Aug 2022 12:22:42 +0000 (15:22 +0300)]
wifi: mac80211: use link in TXQ parameter configuration
Configure the correct link per the passed parameters.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Shaul Triebitz [Tue, 2 Aug 2022 12:22:42 +0000 (15:22 +0300)]
wifi: cfg80211: add link id to txq params
The Tx queue parameters are per link, so add the link ID
from nl80211 parameters to the API.
While at it, lock the wdev when calling into the driver
so it (and we) can check the link ID appropriately.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Shaul Triebitz [Thu, 4 Aug 2022 13:50:18 +0000 (16:50 +0300)]
wifi: mac80211: set link BSSID
For an AP interface, set the link BSSID when the link
is initialized.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Shaul Triebitz [Mon, 1 Aug 2022 11:12:29 +0000 (14:12 +0300)]
wifi: cfg80211: get correct AP link chandef
When checking for channel regulatory validity, use the
AP link chandef (and not mesh's chandef).
Fixes:
7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ilan Peer [Wed, 3 Aug 2022 15:02:56 +0000 (18:02 +0300)]
wifi: cfg80211: Update RNR parsing to align with Draft P802.11be_D2.0
Based on changes in the specification the TBTT information in
the RNR can include MLD information, so update the parsing to
allow extracting the short SSID information in such a case.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Shaul Triebitz [Sun, 24 Jul 2022 08:07:32 +0000 (11:07 +0300)]
wifi: mac80211: properly set old_links when removing a link
In ieee80211_sta_remove_link, valid_links is set to
the new_links before calling drv_change_sta_links, but
is used for the old_links.
Fixes:
cb71f1d136a6 ("wifi: mac80211: add sta link addition/removal")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sat, 23 Jul 2022 20:08:49 +0000 (22:08 +0200)]
wifi: mac80211: accept STA changes without link changes
If there's no link ID, then check that there are no changes to
the link, and if so accept them, unless a new link is created.
While at it, reject creating a new link without an address.
This fixes authorizing an MLD (peer) that has no link 0.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Chih-Kang Chang [Tue, 9 Aug 2022 08:41:07 +0000 (16:41 +0800)]
wifi: rtw88: prohibit enter IPS during HW scan
Mac80211 core may ask driver to change to idle mode during HW scan,
then H2C command for HW scan will send failed since chip is in idle
mode. Therefore, We check the SCANNING flag before entering IPS to
prevent this behavior.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-8-pkshih@realtek.com
Chih-Kang Chang [Tue, 9 Aug 2022 08:41:06 +0000 (16:41 +0800)]
wifi: rtw88: add flag check before enter or leave IPS
Enter or leave IPS controlled by mac80211 before driver support HW
scan. After support HW scan, driver need to control IPS before start
HW scan and scan complete, but mac80211 also ask driver enter or leave
IPS. Therefore, we add flag check in IPS to prevent entering or
leaving IPS twice.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-7-pkshih@realtek.com
Chih-Kang Chang [Tue, 9 Aug 2022 08:41:05 +0000 (16:41 +0800)]
wifi: rtw88: add flushing queue before HW scan
We need to flush queue before HW scan to avoid packets dropped by hardware.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-6-pkshih@realtek.com
Chih-Kang Chang [Tue, 9 Aug 2022 08:41:04 +0000 (16:41 +0800)]
wifi: rtw88: fix WARNING:rtw_get_tx_power_params() during HW scan
During HW scan, the channel related feilds in hal struct changed partially.
If setting Tx power will get WARNING:rtw_get_tx_power_params() due to some
of fields in hal struct mismatch. Therefore, we fix to change all required
fields in hal struct when channel switch during HW scan.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-5-pkshih@realtek.com
Chih-Kang Chang [Tue, 9 Aug 2022 08:41:03 +0000 (16:41 +0800)]
wifi: rtw88: add the update channel flow to support setting by parameters
In order to set channel info to hal during HW scan, we add the update
channel flow to support setting by parameters to meet the HW scan
requriement.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-4-pkshih@realtek.com
Chih-Kang Chang [Tue, 9 Aug 2022 08:41:02 +0000 (16:41 +0800)]
wifi: rtw88: add mutex when set regulatory and get Tx power table
Applying regulatory and getting Tx power table will access hal
data, it should hold rtwdev::mutex to avoid hal data changed during
setting flow.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-3-pkshih@realtek.com
Chih-Kang Chang [Tue, 9 Aug 2022 08:41:01 +0000 (16:41 +0800)]
wifi: rtw88: add mutex when set SAR
Applying SAR will access hal data, it should hold rtwdev::mutex
to avoid hal data changed during setting flow.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-2-pkshih@realtek.com
Wataru Gohda [Fri, 22 Jul 2022 11:56:30 +0000 (13:56 +0200)]
wifi: brcmfmac: Fix to add skb free for TIM update info when tx is completed
The skb will be allocated to send TIM update info in brcmf_fws_tim_update.
Currently the skb will be freed when tx is failed but it will not be freed
when tx is completed successfully. The fix is to free the skb when tx is
completed always.
Signed-off-by: Wataru Gohda <wataru.gohda@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-6-alvin@pqrs.dk
Wataru Gohda [Fri, 22 Jul 2022 11:56:29 +0000 (13:56 +0200)]
wifi: brcmfmac: Fix to add brcmf_clear_assoc_ies when rmmod
Conn_info->req_ie/resp_ie is used to indicate the assoc_req_ies /
assoc_resp_ies to cfg80211 layer when connection is done. The buffer is
freed and allocated again at next connection establishment. The buffers
also needs to be freed at the timing of rmmod as well.
Signed-off-by: Wataru Gohda <wataru.gohda@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-5-alvin@pqrs.dk
Wright Feng [Fri, 22 Jul 2022 11:56:28 +0000 (13:56 +0200)]
wifi: brcmfmac: fix invalid address access when enabling SCAN log level
The variable i is changed when setting random MAC address and causes
invalid address access when printing the value of pi->reqs[i]->reqid.
We replace reqs index with ri to fix the issue.
[ 136.726473] Unable to handle kernel access to user memory outside uaccess routines at virtual address
0000000000000000
[ 136.737365] Mem abort info:
[ 136.740172] ESR = 0x96000004
[ 136.743359] Exception class = DABT (current EL), IL = 32 bits
[ 136.749294] SET = 0, FnV = 0
[ 136.752481] EA = 0, S1PTW = 0
[ 136.755635] Data abort info:
[ 136.758514] ISV = 0, ISS = 0x00000004
[ 136.762487] CM = 0, WnR = 0
[ 136.765522] user pgtable: 4k pages, 48-bit VAs, pgdp =
000000005c4e2577
[ 136.772265] [
0000000000000000] pgd=
0000000000000000
[ 136.777160] Internal error: Oops:
96000004 [#1] PREEMPT SMP
[ 136.782732] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) compat(O)
[ 136.789788] Process wificond (pid: 3175, stack limit = 0x00000000053048fb)
[ 136.796664] CPU: 3 PID: 3175 Comm: wificond Tainted: G O 4.19.42-00001-g531a5f5 #1
[ 136.805532] Hardware name: Freescale i.MX8MQ EVK (DT)
[ 136.810584] pstate:
60400005 (nZCv daif +PAN -UAO)
[ 136.815429] pc : brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[ 136.821811] lr : brcmf_pno_config_sched_scans+0x67c/0xa80 [brcmfmac]
[ 136.828162] sp :
ffff00000e9a3880
[ 136.831475] x29:
ffff00000e9a3890 x28:
ffff800020543400
[ 136.836786] x27:
ffff8000b1008880 x26:
ffff0000012bf6a0
[ 136.842098] x25:
ffff80002054345c x24:
ffff800088d22400
[ 136.847409] x23:
ffff0000012bf638 x22:
ffff0000012bf6d8
[ 136.852721] x21:
ffff8000aced8fc0 x20:
ffff8000ac164400
[ 136.858032] x19:
ffff00000e9a3946 x18:
0000000000000000
[ 136.863343] x17:
0000000000000000 x16:
0000000000000000
[ 136.868655] x15:
ffff0000093f3b37 x14:
0000000000000050
[ 136.873966] x13:
0000000000003135 x12:
0000000000000000
[ 136.879277] x11:
0000000000000000 x10:
ffff000009a61888
[ 136.884589] x9 :
000000000000000f x8 :
0000000000000008
[ 136.889900] x7 :
303a32303d726464 x6 :
ffff00000a1f957d
[ 136.895211] x5 :
0000000000000000 x4 :
ffff00000e9a3942
[ 136.900523] x3 :
0000000000000000 x2 :
ffff0000012cead8
[ 136.905834] x1 :
ffff0000012bf6d8 x0 :
0000000000000000
[ 136.911146] Call trace:
[ 136.913623] brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[ 136.919658] brcmf_pno_start_sched_scan+0xa4/0x118 [brcmfmac]
[ 136.925430] brcmf_cfg80211_sched_scan_start+0x80/0xe0 [brcmfmac]
[ 136.931636] nl80211_start_sched_scan+0x140/0x308 [cfg80211]
[ 136.937298] genl_rcv_msg+0x358/0x3f4
[ 136.940960] netlink_rcv_skb+0xb4/0x118
[ 136.944795] genl_rcv+0x34/0x48
[ 136.947935] netlink_unicast+0x264/0x300
[ 136.951856] netlink_sendmsg+0x2e4/0x33c
[ 136.955781] __sys_sendto+0x120/0x19c
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-4-alvin@pqrs.dk
Wright Feng [Fri, 22 Jul 2022 11:56:27 +0000 (13:56 +0200)]
wifi: brcmfmac: fix scheduling while atomic issue when deleting flowring
We should not sleep while holding the spin lock. It makes
'scheduling while atomic' in brcmf_msgbuf_delete_flowring.
And to avoid race condition between deleting flowring and txflow,
we only hold spin lock when seting flowring status to RING_CLOSING.
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-3-alvin@pqrs.dk
Wright Feng [Fri, 22 Jul 2022 11:56:26 +0000 (13:56 +0200)]
wifi: brcmfmac: fix continuous 802.1x tx pending timeout error
The race condition in brcmf_msgbuf_txflow and brcmf_msgbuf_delete_flowring
makes tx_msghdr writing after brcmf_msgbuf_remove_flowring. Host
driver should delete flowring after txflow complete and all txstatus back,
or pend_8021x_cnt will never be zero and cause every connection 950
milliseconds(MAX_WAIT_FOR_8021X_TX) delay.
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-2-alvin@pqrs.dk
Chia-Yuan Li [Tue, 2 Aug 2022 12:38:16 +0000 (20:38 +0800)]
wifi: rtw89: 8852a: correct WDE IMR settings
Correct IMR settings to let self error recover mechanism works accurately.
Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220802123816.16685-1-pkshih@realtek.com
Zong-Zhe Yang [Tue, 2 Aug 2022 12:37:12 +0000 (20:37 +0800)]
wifi: rtw89: refine leaving LPS function
It's unnecessary to iterate leaving PS mode.
So, move it out of the iteration.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220802123712.16577-1-pkshih@realtek.com
Sebin Sebastian [Tue, 2 Aug 2022 04:52:39 +0000 (10:22 +0530)]
wifi: qtnfmac: remove braces around single statement blocks
Remove braces around single statement blocks in order to improve
readability. Also, an extra blank line was removed. Both warnings are
reported by checkpatch.pl
Signed-off-by: Sebin Sebastian <mailmesebin00@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220802045305.235684-1-mailmesebin00@gmail.com
Ping-Ke Shih [Mon, 1 Aug 2022 11:33:45 +0000 (19:33 +0800)]
wifi: rtlwifi: 8192de: correct checking of IQK reload
Since IQK could spend time, we make a cache of IQK result matrix that looks
like iqk_matrix[channel_idx].val[x][y], and we can reload the matrix if we
have made a cache. To determine a cache is made, we check
iqk_matrix[channel_idx].val[0][0].
The initial commit
7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines")
make a mistake that checks incorrect iqk_matrix[channel_idx].val[0] that
is always true, and this mistake is found by commit
ee3db469dd31
("wifi: rtlwifi: remove always-true condition pointed out by GCC 12"), so
I recall the vendor driver to find fix and apply the correctness.
Fixes:
7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220801113345.42016-1-pkshih@realtek.com
Ruffalo Lavoisier [Sun, 31 Jul 2022 22:58:50 +0000 (07:58 +0900)]
wifi: brcmsmac: remove duplicate words
Remove repeated 'to' from 'to to'
Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220731225850.106290-1-RuffaloLavoisier@gmail.com
Krzysztof Kozlowski [Wed, 27 Jul 2022 16:41:30 +0000 (18:41 +0200)]
dt-bindings: wireless: use spi-peripheral-props.yaml
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727164130.385411-2-krzysztof.kozlowski@linaro.org
Ping-Ke Shih [Wed, 27 Jul 2022 06:52:32 +0000 (14:52 +0800)]
wifi: rtw88: access chip_info by const pointer
Since chip_info has became const table, we must access them via const
pointer to avoid invalid writing.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727065232.28510-1-pkshih@realtek.com
Zong-Zhe Yang [Wed, 27 Jul 2022 06:50:03 +0000 (14:50 +0800)]
wifi: rtw88: phy: fix warning of possible buffer overflow
reported by smatch
phy.c:854 rtw_phy_linear_2_db() error: buffer overflow 'db_invert_table[i]'
8 <= 8 (assuming for loop doesn't break)
However, it seems to be a false alarm because we prevent it originally via
if (linear >= db_invert_table[11][7])
return 96; /* maximum 96 dB */
Still, we adjust the code to be more readable and avoid smatch warning.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727065003.28340-5-pkshih@realtek.com
Chih-Kang Chang [Wed, 27 Jul 2022 06:50:02 +0000 (14:50 +0800)]
wifi: rtw88: fix store OP channel info timing when HW scan
The original timing that store OP channel info is after associated.
However, HW scan might happen before associated without backing to
OP channel, that will cause authentication or association fail.
Therefore, we modify the timing of storing OP channel info.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727065003.28340-4-pkshih@realtek.com
Chih-Kang Chang [Wed, 27 Jul 2022 06:50:01 +0000 (14:50 +0800)]
wifi: rtw88: fix stopping queues in wrong timing when HW scan
HW scan need to start queues after switch to OP channel, and stop queues
before leaving op channel. However, in original code, driver will start
queues after switch to OP channel, but stop queues until switch to OP
channel next time, that will cause packets transmitted in wrong channel.
So we fix the stop queues timing.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727065003.28340-3-pkshih@realtek.com
Po-Hao Huang [Wed, 27 Jul 2022 06:50:00 +0000 (14:50 +0800)]
wifi: rtw88: 8822c: extend supported probe request size
Some WSC IEs require size larger than we current supports. Extend size
to fit those demands. Separate the registered scan IE length by IC so
settings can be independent.
Since old firmware uses fewer page number, define a firmware feature to
be compatible with various firmware version.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727065003.28340-2-pkshih@realtek.com
Jakub Kicinski [Sat, 30 Jul 2022 04:39:06 +0000 (21:39 -0700)]
Merge tag 'mlx5-updates-2022-07-28' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-07-28
Misc updates to mlx5 driver:
1) Gal corrects to use skb_tcp_all_headers on encapsulated skbs.
2) Roi Adds the support for offloading standalone police actions.
3) lama, did some refactoring to minimize code coupling with
mlx5e_priv "god object" in some of the follows, and converts some of the
objects to pointers to preserve on memory when these objects aren't needed.
This is part one of two parts series.
* tag 'mlx5-updates-2022-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Move mlx5e_init_l2_addr to en_main
net/mlx5e: Split en_fs ndo's and move to en_main
net/mlx5e: Separate mlx5e_set_rx_mode_work and move caller to en_main
net/mlx5e: Add mdev to flow_steering struct
net/mlx5e: Report flow steering errors with mdev err report API
net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer
net/mlx5e: Allocate VLAN and TC for featured profiles only
net/mlx5e: Make mlx5e_tc_table private
net/mlx5e: Convert mlx5e_tc_table member of mlx5e_flow_steering to pointer
net/mlx5e: TC, Support tc action api for police
net/mlx5e: TC, Separate get/update/replace meter functions
net/mlx5e: Add red and green counters for metering
net/mlx5e: TC, Allocate post meter ft per rule
net/mlx5: DR, Add support for flow metering ASO
net/mlx5e: Fix wrong use of skb_tcp_all_headers() with encapsulation
====================
Link: https://lore.kernel.org/r/20220728205728.143074-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 30 Jul 2022 04:26:09 +0000 (21:26 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-07-28
This series contains updates to ice driver only.
Michal allows for VF true promiscuous mode to be set for multiple VFs
and adds clearing of promiscuous filters when VF trust is removed.
Maciej refactors ice_set_features() to track/check changed features
instead of constantly checking against netdev features and adds support for
NETIF_F_LOOPBACK.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: allow toggling loopback mode via ndo_set_features callback
ice: compress branches in ice_set_features()
ice: Fix promiscuous mode not turning off
ice: Introduce enabling promiscuous mode on multiple VF's
====================
Link: https://lore.kernel.org/r/20220728195538.3391360-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 30 Jul 2022 04:22:09 +0000 (21:22 -0700)]
Merge branch 'sfc-vf-representors-for-ef100-rx-side'
Edward Cree says:
====================
sfc: VF representors for EF100 - RX side
This series adds the receive path for EF100 VF representors, plus other
minor features such as statistics.
====================
Link: https://lore.kernel.org/r/cover.1659034549.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 28 Jul 2022 18:57:52 +0000 (19:57 +0100)]
sfc: implement ethtool get/set RX ring size for EF100 reps
It's not truly a ring, but the maximum length of the list of queued RX
SKBs is analogous to an RX ring size, so use that API to configure it.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 28 Jul 2022 18:57:51 +0000 (19:57 +0100)]
sfc: use a dynamic m-port for representor RX and set it promisc
Representors do not want to be subject to the PF's Ethernet address
filters, since traffic from VFs will typically have a destination
either elsewhere on the link segment or on an overlay network.
So, create a dynamic m-port with promiscuous and all-multicast
filters, and set it as the egress port of representor default rules.
Since the m-port is an alias of the calling PF's own m-port, traffic
will still be delivered to the PF's RXQs, but it will be subject to
the VNRX filter rules installed on the dynamic m-port (specified by
the v-port ID field of the filter spec).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 28 Jul 2022 18:57:50 +0000 (19:57 +0100)]
sfc: move table locking into filter_table_{probe,remove} methods
We need to be able to drop the efx->filter_sem in ef100_filter_table_up()
so that we can call functions that insert filters (and thus take that
rwsem for read), which means the efx->type->filter_table_probe method
needs to be responsible for taking the lock in the first place.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 28 Jul 2022 18:57:49 +0000 (19:57 +0100)]
sfc: insert default MAE rules to connect VFs to representors
Default rules are low-priority switching rules which the hardware uses
in the absence of higher-priority rules. Each representor requires a
corresponding rule matching traffic from its representee VF and
delivering to the PF (where a check on INGRESS_MPORT in
__ef100_rx_packet() will direct it to the representor). No rule is
required in the reverse direction, because representor TX uses a TX
override descriptor to bypass the MAE and deliver directly to the VF.
Since inserting any rule into the MAE disables the firmware's own
default rules, also insert a pair of rules to connect the PF to the
physical network port and vice-versa.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 28 Jul 2022 18:57:48 +0000 (19:57 +0100)]
sfc: receive packets from EF100 VFs into representors
If the source m-port of a packet in __ef100_rx_packet() is a VF,
hand off the packet to the corresponding representor with
efx_ef100_rep_rx_packet().
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 28 Jul 2022 18:57:47 +0000 (19:57 +0100)]
sfc: check ef100 RX packets are from the wire
If not, for now drop them and warn. A subsequent patch will look up
the source m-port to try and find a representor to deliver them to.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 28 Jul 2022 18:57:46 +0000 (19:57 +0100)]
sfc: determine wire m-port at EF100 PF probe time
Traffic delivered to the (MAE admin) PF could be from either the wire
or a VF. The INGRESS_MPORT field of the RX prefix distinguishes these;
base_mport is the value this field will have for traffic from the wire
(which should be delivered to the PF's netdevice, not a representor).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 28 Jul 2022 18:57:45 +0000 (19:57 +0100)]
sfc: ef100 representor RX top half
Representor RX uses a NAPI context driven by a 'fake interrupt': when
the parent PF receives a packet destined for the representor, it adds
it to an SKB list (efv->rx_list), and schedules NAPI if the 'fake
interrupt' is primed. The NAPI poll then pulls packets off this list
and feeds them to the stack with netif_receive_skb_list().
This scheme allows us to decouple representor RX from the parent PF's
RX fast-path.
This patch implements the 'top half', which builds an SKB, copies data
into it from the RX buffer (which can then be released), adds it to
the queue and fires the 'fake interrupt' if necessary.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 28 Jul 2022 18:57:44 +0000 (19:57 +0100)]
sfc: ef100 representor RX NAPI poll
This patch adds the 'bottom half' napi->poll routine for representor RX.
See the next patch (with the top half) for an explanation of the 'fake
interrupt' scheme used to drive this NAPI context.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Edward Cree [Thu, 28 Jul 2022 18:57:43 +0000 (19:57 +0100)]
sfc: plumb ef100 representor stats
Implement .ndo_get_stats64() method to read values out of struct
efx_rep_sw_stats.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Thu, 28 Jul 2022 14:32:36 +0000 (17:32 +0300)]
net: marvell: prestera: uninitialized variable bug
The "ret" variable needs to be initialized at the start.
Fixes:
52323ef75414 ("net: marvell: prestera: add phylink support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YuKeBBuGtsmd7QdT@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yu Zhe [Fri, 29 Jul 2022 06:17:12 +0000 (14:17 +0800)]
dn_route: replace "jiffies-now>0" with "jiffies!=now"
Use "jiffies != now" to replace "jiffies - now > 0" to make
code more readable. We want to put a limit on how long the
loop can run for before rescheduling.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Link: https://lore.kernel.org/r/20220729061712.22666-1-yuzhe@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 30 Jul 2022 02:34:45 +0000 (19:34 -0700)]
Merge tag 'wireless-next-2022-07-29' of git://git./linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.20
Fourth set of patches for v5.20, last few patches before the merge
window. Only driver changes this time, mostly just fixes and cleanup.
Major changes:
brcmfmac
- support brcm,ccode-map-trivial DT property
wcn36xx
- add debugfs file to show firmware feature strings
* tag 'wireless-next-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (36 commits)
wifi: rtw88: check the return value of alloc_workqueue()
wifi: rtw89: 8852a: adjust IMR for SER L1
wifi: rtw89: 8852a: update RF radio A/B R56
wifi: wcn36xx: Add debugfs entry to read firmware feature strings
wifi: wcn36xx: Move capability bitmap to string translation function to firmware.c
wifi: wcn36xx: Move firmware feature bit storage to dedicated firmware.c file
wifi: wcn36xx: Rename clunky firmware feature bit enum
wifi: brcmfmac: prevent double-free on hardware-reset
wifi: brcmfmac: support brcm,ccode-map-trivial DT property
dt-bindings: bcm4329-fmac: add optional brcm,ccode-map-trivial
wifi: brcmfmac: Replace default (not configured) MAC with a random MAC
wifi: brcmfmac: Add brcmf_c_set_cur_etheraddr() helper
wifi: brcmfmac: Remove #ifdef guards for PM related functions
wifi: brcmfmac: use strreplace() in brcmf_of_probe()
wifi: plfxlc: Use eth_zero_addr() to assign zero address
wifi: wilc1000: use existing iftype variable to store the interface type
wifi: wilc1000: add 'isinit' flag for SDIO bus similar to SPI
wifi: wilc1000: cancel the connect operation during interface down
wifi: wilc1000: get correct length of string WID from received config packet
wifi: wilc1000: set station_info flag only when signal value is valid
...
====================
Link: https://lore.kernel.org/r/20220729192832.A5011C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 30 Jul 2022 02:04:28 +0000 (19:04 -0700)]
Merge https://git./linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:
====================
bpf-next 2022-07-29
We've added 22 non-merge commits during the last 4 day(s) which contain
a total of 27 files changed, 763 insertions(+), 120 deletions(-).
The main changes are:
1) Fixes to allow setting any source IP with bpf_skb_set_tunnel_key() helper,
from Paul Chaignon.
2) Fix for bpf_xdp_pointer() helper when doing sanity checking, from Joanne Koong.
3) Fix for XDP frame length calculation, from Lorenzo Bianconi.
4) Libbpf BPF_KSYSCALL docs improvements and fixes to selftests to accommodate
s390x quirks with socketcall(), from Ilya Leoshkevich.
5) Allow/denylist and CI configs additions to selftests/bpf to improve BPF CI,
from Daniel Müller.
6) BPF trampoline + ftrace follow up fixes, from Song Liu and Xu Kuohai.
7) Fix allocation warnings in netdevsim, from Jakub Kicinski.
8) bpf_obj_get_opts() libbpf API allowing to provide file flags, from Joe Burton.
9) vsnprintf usage fix in bpf_snprintf_btf(), from Fedor Tokarev.
10) Various small fixes and clean ups, from Daniel Müller, Rongguang Wei,
Jörn-Thorben Hinz, Yang Li.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (22 commits)
bpf: Remove unneeded semicolon
libbpf: Add bpf_obj_get_opts()
netdevsim: Avoid allocation warnings triggered from user space
bpf: Fix NULL pointer dereference when registering bpf trampoline
bpf: Fix test_progs -j error with fentry/fexit tests
selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeout
bpftool: Don't try to return value from void function in skeleton
bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macro
bpf: btf: Fix vsnprintf return value check
libbpf: Support PPC in arch_specific_syscall_pfx
selftests/bpf: Adjust vmtest.sh to use local kernel configuration
selftests/bpf: Copy over libbpf configs
selftests/bpf: Sort configuration
selftests/bpf: Attach to socketcall() in test_probe_user
libbpf: Extend BPF_KSYSCALL documentation
bpf, devmap: Compute proper xdp_frame len redirecting frames
bpf: Fix bpf_xdp_pointer return pointer
selftests/bpf: Don't assign outer source IP to host
bpf: Set flow flag to allow any source IP in bpf_tunnel_key
geneve: Use ip_tunnel_key flow flags in route lookups
...
====================
Link: https://lore.kernel.org/r/20220729230948.1313527-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yang Li [Mon, 25 Jul 2022 22:27:33 +0000 (06:27 +0800)]
bpf: Remove unneeded semicolon
Eliminate the following coccicheck warning:
/kernel/bpf/trampoline.c:101:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220725222733.55613-1-yang.lee@linux.alibaba.com
Joe Burton [Fri, 29 Jul 2022 20:27:27 +0000 (20:27 +0000)]
libbpf: Add bpf_obj_get_opts()
Add an extensible variant of bpf_obj_get() capable of setting the
`file_flags` parameter.
This parameter is needed to enable unprivileged access to BPF maps.
Without a method like this, users must manually make the syscall.
Signed-off-by: Joe Burton <jevburton@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220729202727.3311806-1-jevburton.kernel@gmail.com
Jakub Kicinski [Tue, 26 Jul 2022 21:36:05 +0000 (14:36 -0700)]
netdevsim: Avoid allocation warnings triggered from user space
We need to suppress warnings from sily map sizes. Also switch
from GFP_USER to GFP_KERNEL_ACCOUNT, I'm pretty sure I misunderstood
the flags when writing this code.
Fixes:
395cacb5f1a0 ("netdevsim: bpf: support fake map offload")
Reported-by: syzbot+ad24705d3fd6463b18c6@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220726213605.154204-1-kuba@kernel.org
Xu Kuohai [Thu, 28 Jul 2022 11:40:48 +0000 (07:40 -0400)]
bpf: Fix NULL pointer dereference when registering bpf trampoline
A panic was reported on arm64:
[ 44.517109] audit: type=1334 audit(
1658859870.268:59): prog-id=19 op=LOAD
[ 44.622031] Unable to handle kernel NULL pointer dereference at
virtual address
0000000000000010
[ 44.624321] Mem abort info:
[ 44.625049] ESR = 0x0000000096000004
[ 44.625935] EC = 0x25: DABT (current EL), IL = 32 bits
[ 44.627182] SET = 0, FnV = 0
[ 44.627930] EA = 0, S1PTW = 0
[ 44.628684] FSC = 0x04: level 0 translation fault
[ 44.629788] Data abort info:
[ 44.630474] ISV = 0, ISS = 0x00000004
[ 44.631362] CM = 0, WnR = 0
[ 44.632041] user pgtable: 4k pages, 48-bit VAs, pgdp=
0000000100ab5000
[ 44.633494] [
0000000000000010] pgd=
0000000000000000, p4d=
0000000000000000
[ 44.635202] Internal error: Oops:
96000004 [#1] SMP
[ 44.636452] Modules linked in: xfs crct10dif_ce ghash_ce virtio_blk
virtio_console virtio_mmio qemu_fw_cfg
[ 44.638713] CPU: 2 PID: 1 Comm: systemd Not tainted 5.19.0-rc7 #1
[ 44.640164] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 44.641799] pstate:
00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 44.643404] pc : ftrace_set_filter_ip+0x24/0xa0
[ 44.644659] lr : bpf_trampoline_update.constprop.0+0x428/0x4a0
[ 44.646118] sp :
ffff80000803b9f0
[ 44.646950] x29:
ffff80000803b9f0 x28:
ffff0b5d80364400 x27:
ffff80000803bb48
[ 44.648721] x26:
ffff8000085ad000 x25:
ffff0b5d809d2400 x24:
0000000000000000
[ 44.650493] x23:
00000000ffffffed x22:
ffff0b5dd7ea0900 x21:
0000000000000000
[ 44.652279] x20:
0000000000000000 x19:
0000000000000000 x18:
ffffffffffffffff
[ 44.654067] x17:
0000000000000000 x16:
0000000000000000 x15:
ffffffffffffffff
[ 44.655787] x14:
ffff0b5d809d2498 x13:
ffff0b5d809d2432 x12:
0000000005f5e100
[ 44.657535] x11:
abcc77118461cefd x10:
000000000000005f x9 :
ffffa7219cb5b190
[ 44.659254] x8 :
ffffa7219c8e0000 x7 :
0000000000000000 x6 :
ffffa7219db075e0
[ 44.661066] x5 :
ffffa7219d3130e0 x4 :
ffffa7219cab9da0 x3 :
0000000000000000
[ 44.662837] x2 :
0000000000000000 x1 :
ffffa7219cb7a5c0 x0 :
0000000000000000
[ 44.664675] Call trace:
[ 44.665274] ftrace_set_filter_ip+0x24/0xa0
[ 44.666327] bpf_trampoline_update.constprop.0+0x428/0x4a0
[ 44.667696] __bpf_trampoline_link_prog+0xcc/0x1c0
[ 44.668834] bpf_trampoline_link_prog+0x40/0x64
[ 44.669919] bpf_tracing_prog_attach+0x120/0x490
[ 44.671011] link_create+0xe0/0x2b0
[ 44.671869] __sys_bpf+0x484/0xd30
[ 44.672706] __arm64_sys_bpf+0x30/0x40
[ 44.673678] invoke_syscall+0x78/0x100
[ 44.674623] el0_svc_common.constprop.0+0x4c/0xf4
[ 44.675783] do_el0_svc+0x38/0x4c
[ 44.676624] el0_svc+0x34/0x100
[ 44.677429] el0t_64_sync_handler+0x11c/0x150
[ 44.678532] el0t_64_sync+0x190/0x194
[ 44.679439] Code:
2a0203f4 f90013f5 2a0303f5 f9001fe1 (
f9400800)
[ 44.680959] ---[ end trace
0000000000000000 ]---
[ 44.682111] Kernel panic - not syncing: Oops: Fatal exception
[ 44.683488] SMP: stopping secondary CPUs
[ 44.684551] Kernel Offset: 0x2721948e0000 from 0xffff800008000000
[ 44.686095] PHYS_OFFSET: 0xfffff4a380000000
[ 44.687144] CPU features: 0x010,
00022811,
19001080
[ 44.688308] Memory Limit: none
[ 44.689082] ---[ end Kernel panic - not syncing: Oops: Fatal exception ]---
It's caused by a NULL tr->fops passed to ftrace_set_filter_ip(). tr->fops
is initialized to NULL and is assigned to an allocated memory address if
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is enabled. Since there is no
direct call on arm64 yet, the config can't be enabled.
To fix it, call ftrace_set_filter_ip() only if tr->fops is not NULL.
Fixes:
00963a2e75a8 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Bruno Goncalves <bgoncalv@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220728114048.3540461-1-xukuohai@huaweicloud.com
Song Liu [Fri, 29 Jul 2022 19:41:06 +0000 (12:41 -0700)]
bpf: Fix test_progs -j error with fentry/fexit tests
When multiple threads are attaching/detaching fentry/fexit programs to
the same trampoline, we may call register_fentry on the same trampoline
twice: register_fentry(), unregister_fentry(), then register_fentry again.
This causes ftrace_set_filter_ip() for the same ip on tr->fops twice,
which leaves duplicated ip in tr->fops. The extra ip is not cleaned up
properly on unregister and thus causes failures with further register in
register_ftrace_direct_multi():
register_ftrace_direct_multi()
{
...
for (i = 0; i < size; i++) {
hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
if (ftrace_find_rec_direct(entry->ip))
goto out_unlock;
}
}
...
}
This can be triggered with parallel fentry/fexit tests with test_progs:
./test_progs -t fentry,fexit -j
Fix this by resetting tr->fops in ftrace_set_filter_ip(), so that there
will never be duplicated entries in tr->fops.
Fixes:
00963a2e75a8 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220729194106.1207472-1-song@kernel.org
Daniel Müller [Wed, 27 Jul 2022 18:29:55 +0000 (18:29 +0000)]
selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeout
The send_signal/send_signal_tracepoint is pretty flaky, with at least
one failure in every ten runs on a few attempts I've tried it:
> test_send_signal_common:PASS:pipe_c2p 0 nsec
> test_send_signal_common:PASS:pipe_p2c 0 nsec
> test_send_signal_common:PASS:fork 0 nsec
> test_send_signal_common:PASS:skel_open_and_load 0 nsec
> test_send_signal_common:PASS:skel_attach 0 nsec
> test_send_signal_common:PASS:pipe_read 0 nsec
> test_send_signal_common:PASS:pipe_write 0 nsec
> test_send_signal_common:PASS:reading pipe 0 nsec
> test_send_signal_common:PASS:reading pipe error: size 0 0 nsec
> test_send_signal_common:FAIL:incorrect result unexpected incorrect result: actual 48 != expected 50
> test_send_signal_common:PASS:pipe_write 0 nsec
> #139/1 send_signal/send_signal_tracepoint:FAIL
The reason does not appear to be a correctness issue in the strict
sense. Rather, we merely do not receive the signal we are waiting for
within the provided timeout.
Let's bump the timeout by a factor of ten. With that change I have not
been able to reproduce the failure in 150+ iterations. I am also sneaking
in a small simplification to the test_progs test selection logic.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220727182955.4044988-1-deso@posteo.net
Jörn-Thorben Hinz [Tue, 26 Jul 2022 13:32:03 +0000 (15:32 +0200)]
bpftool: Don't try to return value from void function in skeleton
A skeleton generated by bpftool previously contained a return followed
by an expression in OBJ_NAME__detach(), which has return type void. This
did not hurt, the bpf_object__detach_skeleton() called there returns
void itself anyway, but led to a warning when compiling with e.g.
-pedantic.
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220726133203.514087-1-jthinz@mailbox.tu-berlin.de
Rongguang Wei [Tue, 26 Jul 2022 09:30:45 +0000 (17:30 +0800)]
bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macro
Use the ARRAY_SIZE macro and make the code more compact.
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220726093045.3374026-1-clementwei90@163.com
Fedor Tokarev [Mon, 11 Jul 2022 21:13:17 +0000 (23:13 +0200)]
bpf: btf: Fix vsnprintf return value check
vsnprintf returns the number of characters which would have been written if
enough space had been available, excluding the terminating null byte. Thus,
the return value of 'len_left' means that the last character has been
dropped.
Signed-off-by: Fedor Tokarev <ftokarev@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220711211317.GA1143610@laptop
Kalle Valo [Fri, 29 Jul 2022 13:38:03 +0000 (16:38 +0300)]
Merge ath-next from git://git./linux/kernel/git/kvalo/ath.git
ath.git patches for v5.20. Major changes:
ath11k:
* fix WCN9074 to work again
* revert rfkill support as it was causing problems
William Dean [Sat, 23 Jul 2022 06:37:56 +0000 (14:37 +0800)]
wifi: rtw88: check the return value of alloc_workqueue()
The function alloc_workqueue() in rtw_core_init() can fail, but
there is no check of its return value. To fix this bug, its return value
should be checked with new error handling code.
Fixes:
fe101716c7c9d ("rtw88: replace tx tasklet with work queue")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220723063756.2956189-1-williamsukatube@163.com
Zong-Zhe Yang [Thu, 21 Jul 2022 07:49:52 +0000 (15:49 +0800)]
wifi: rtw89: 8852a: adjust IMR for SER L1
SER (system error recovery) L1 (level 1) has a step-by-step handshake
process with FW. These handshakes still rely on B_AX_HS0ISR_IND_INT_EN.
So, even already during recovery, we enable this bit in IMR.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220721074952.19676-1-pkshih@realtek.com
Ping-Ke Shih [Wed, 22 Jun 2022 09:19:37 +0000 (17:19 +0800)]
wifi: rtw89: 8852a: update RF radio A/B R56
Update to internal tag HALRF_027_00_060.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220622091937.11325-1-pkshih@realtek.com
Bryan O'Donoghue [Wed, 27 Jul 2022 16:16:55 +0000 (17:16 +0100)]
wifi: wcn36xx: Add debugfs entry to read firmware feature strings
Add in the ability to easily find the firmware feature bits reported in the
get feature exchange without having to compile-in debug prints.
root@linaro-alip:~# cat /sys/kernel/debug/ieee80211/phy0/wcn36xx/firmware_feat_caps
MCC
P2P
DOT11AC
SLM_SESSIONIZATION
DOT11AC_OPMODE
SAP32STA
TDLS
P2P_GO_NOA_DECOUPLE_INIT_SCAN
WLANACTIVE_OFFLOAD
BEACON_OFFLOAD
SCAN_OFFLOAD
BCN_MISS_OFFLOAD
STA_POWERSAVE
STA_ADVANCED_PWRSAVE
BCN_FILTER
RTT
RATECTRL
WOW
WLAN_ROAM_SCAN_OFFLOAD
SPECULATIVE_PS_POLL
IBSS_HEARTBEAT_OFFLOAD
WLAN_SCAN_OFFLOAD
WLAN_PERIODIC_TX_PTRN
ADVANCE_TDLS
BATCH_SCAN
FW_IN_TX_PATH
EXTENDED_NSOFFLOAD_SLOT
CH_SWITCH_V1
HT40_OBSS_SCAN
UPDATE_CHANNEL_LIST
WLAN_MCADDR_FLT
WLAN_CH144
TDLS_SCAN_COEXISTENCE
LINK_LAYER_STATS_MEAS
MU_MIMO
EXTENDED_SCAN
DYNAMIC_WMM_PS
MAC_SPOOFED_SCAN
FW_STATS
WPS_PRBRSP_TMPL
BCN_IE_FLT_DELTA
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-5-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 27 Jul 2022 16:16:54 +0000 (17:16 +0100)]
wifi: wcn36xx: Move capability bitmap to string translation function to firmware.c
Move wcn36xx_get_cap_name() function in main.c into firmware.c as
wcn36xx_firmware_get_cap_name().
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-4-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 27 Jul 2022 16:16:53 +0000 (17:16 +0100)]
wifi: wcn36xx: Move firmware feature bit storage to dedicated firmware.c file
The naming of the get/set/clear firmware feature capability bits doesn't
really follow the established namespace pattern of
wcn36xx_logicalblock_do_something();
The feature bits are accessed by smd.c and main.c. It would be nice to
display the found feature bits in debugfs. To do so though we should tidy
up the namespace a bit.
Move the firmware feature exchange API to its own file - firmware.c giving
us the opportunity to functionally decompose other firmware related
accessors as appropriate in future.
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-3-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Wed, 27 Jul 2022 16:16:52 +0000 (17:16 +0100)]
wifi: wcn36xx: Rename clunky firmware feature bit enum
The enum name "place_holder_in_cap_bitmap" is self descriptively asking to
be changed to something else.
Rename place_holder_in_cap_bitmap to wcn36xx_firmware_feat_caps so that the
contents and intent of the enum is obvious.
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-2-bryan.odonoghue@linaro.org
David S. Miller [Fri, 29 Jul 2022 11:18:10 +0000 (12:18 +0100)]
Merge branch 'mtk_eth_soc-xdp-multi-frame'
Lorenzo Bianconi says:
====================
mtk_eth_soc: introduce xdp multi-frag support
Convert mtk_eth_soc driver to xdp_return_frame_bulk APIs.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Wed, 27 Jul 2022 21:20:52 +0000 (23:20 +0200)]
net: ethernet: mtk_eth_soc: add xdp tx return bulking support
Convert mtk_eth_soc driver to xdp_return_frame_bulk APIs.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Wed, 27 Jul 2022 21:20:51 +0000 (23:20 +0200)]
net: ethernet: mtk_eth_soc: introduce xdp multi-frag support
Add the capability to map non-linear xdp frames in XDP_TX and
ndo_xdp_xmit callback.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Wed, 27 Jul 2022 21:20:50 +0000 (23:20 +0200)]
net: ethernet: mtk_eth_soc: introduce mtk_xdp_frame_map utility routine
This is a preliminary patch to add xdp multi-frag support to mtk_eth_soc
driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 29 Jul 2022 11:14:03 +0000 (12:14 +0100)]
Merge branch 'seg6-headend-reduced'
Andrea Mayer says:
====================
seg6: add support for SRv6 Headend Reduced
This patchset adds support for SRv6 Headend behavior with Reduced
Encapsulation. It introduces the H.Encaps.Red and H.L2Encaps.Red versions
of the SRv6 H.Encaps and H.L2Encaps behaviors, according to RFC 8986 [1].
In details, the patchset is made of:
- patch 1/4: add support for SRv6 H.Encaps.Red behavior;
- Patch 2/4: add support for SRv6 H.L2Encaps.Red behavior;
- patch 2/4: add selftest for SRv6 H.Encaps.Red behavior;
- patch 3/4: add selftest for SRv6 H.L2Encaps.Red behavior.
The corresponding iproute2 patch for supporting SRv6 H.Encaps.Red and
H.L2Encaps.Red behaviors is provided in a separated patchset.
[1] - https://datatracker.ietf.org/doc/html/rfc8986
V4 -> v5:
- Fix skb checksum for SRH Reduced encapsulation/insertion;
- Improve selftests by:
i) adding a random suffix to network namespaces;
ii) creating net devices directly into network namespaces;
iii) using trap EXIT command to properly clean up selftest networks.
Thanks to Paolo Abeni.
v3 -> v4:
- Add selftests to the Makefile, thanks to Jakub Kicinski.
v2 -> v3:
- Keep SRH when HMAC TLV is present;
- Split the support for H.Encaps.Red and H.L2Encaps.Red behaviors in two
patches (respectively, patch 1/4 and patch 2/4);
- Add selftests for SRv6 H.Encaps.Red and H.L2Encaps.Red.
v1 -> v2:
- Fixed sparse warnings;
- memset now uses sizeof() instead of hardcoded value;
- Removed EXPORT_SYMBOL_GPL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Mayer [Wed, 27 Jul 2022 18:54:08 +0000 (20:54 +0200)]
selftests: seg6: add selftest for SRv6 H.L2Encaps.Red behavior
This selftest is designed for testing the H.L2Encaps.Red behavior. It
instantiates a virtual network composed of several nodes: hosts and SRv6
routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test considers SRv6 routers implementing a L2 VPN leveraged by hosts
for communicating with each other. Such routers make use of the SRv6
H.L2Encaps.Red behavior for applying SRv6 policies to L2 traffic coming
from hosts.
The correct execution of the behavior is verified through reachability
tests carried out between hosts belonging to the same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Mayer [Wed, 27 Jul 2022 18:54:07 +0000 (20:54 +0200)]
selftests: seg6: add selftest for SRv6 H.Encaps.Red behavior
This selftest is designed for testing the H.Encaps.Red behavior. It
instantiates a virtual network composed of several nodes: hosts and SRv6
routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test considers SRv6 routers implementing L3 VPNs leveraged by hosts
for communicating with each other. Such routers make use of the SRv6
H.Encaps.Red behavior for applying SRv6 policies to L3 traffic coming
from hosts.
The correct execution of the behavior is verified through reachability
tests carried out between hosts belonging to the same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Mayer [Wed, 27 Jul 2022 18:54:06 +0000 (20:54 +0200)]
seg6: add support for SRv6 H.L2Encaps.Red behavior
The SRv6 H.L2Encaps.Red behavior described in [1] is an optimization of
the SRv6 H.L2Encaps behavior [2].
H.L2Encaps.Red reduces the length of the SRH by excluding the first
segment (SID) in the SRH of the pushed IPv6 header. The first SID is
only placed in the IPv6 Destination Address field of the pushed IPv6
header.
When the SRv6 Policy only contains one SID the SRH is omitted, unless
there is an HMAC TLV to be carried.
[1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.4
[2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.3
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Mayer [Wed, 27 Jul 2022 18:54:05 +0000 (20:54 +0200)]
seg6: add support for SRv6 H.Encaps.Red behavior
The SRv6 H.Encaps.Red behavior described in [1] is an optimization of
the SRv6 H.Encaps behavior [2].
H.Encaps.Red reduces the length of the SRH by excluding the first
segment (SID) in the SRH of the pushed IPv6 header. The first SID is
only placed in the IPv6 Destination Address field of the pushed IPv6
header.
When the SRv6 Policy only contains one SID the SRH is omitted, unless
there is an HMAC TLV to be carried.
[1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.2
[2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.1
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ronak Doshi [Wed, 27 Jul 2022 17:30:37 +0000 (10:30 -0700)]
vmxnet3: do not reschedule napi for rx processing
Commit '
2c5a5748105a ("vmxnet3: add support for out of order rx
completion")' added support for out of order rx completion. Within
that patch, an enhancement was done to reschedule napi for processing
rx completions.
However, it can lead to missing an interrupt. So, this patch reverts
that part of the code.
Fixes:
2c5a5748105a ("vmxnet3: add support for out of order rx completion")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Wed, 27 Jul 2022 11:18:21 +0000 (13:18 +0200)]
Documentation: Describe net.ipv4.tcp_reflect_tos.
The tcp_reflect_tos option was introduced in Linux 5.10 but was still
undocumented.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao [Wed, 27 Jul 2022 09:33:12 +0000 (17:33 +0800)]
net/af_packet: check len when min_header_len equals to 0
User can use AF_PACKET socket to send packets with the length of 0.
When min_header_len equals to 0, packet_snd will call __dev_queue_xmit
to send packets, and sock->type can be any type.
Reported-by: syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com
Fixes:
fd1894224407 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 29 Jul 2022 10:02:24 +0000 (11:02 +0100)]
Merge branch 'mlxsw-ptp-spectrum-2'
Ido Schimmel says:
====================
mlxsw: Add PTP support for Spectrum-2 and newer ASICs
This patchset adds PTP support for Spectrum-{2,3,4} switch ASICs. They
all act largely the same with respect to PTP except for a workaround
implemented for Spectrum-{2,3} in patch #6.
Spectrum-2 and newer ASICs essentially implement a transparent clock
between all the switch ports, including the CPU port. The hardware will
generate the UTC time stamp for transmitted / received packets at the
CPU port, but will compensate for forwarding delays in the ASIC by
adjusting the correction field in the PTP header (for PTP events) at the
ingress and egress ports.
Specifically, the hardware will subtract the current time stamp from the
correction field at the ingress port and will add the current time stamp
to the correction field at the egress port. For the purpose of an
ordinary or boundary clock (this patchset), the correction field will
always be adjusted between the CPU port and one of the front panel
ports, but never between two front panel ports.
Patchset overview:
Patch #1 extracts a helper to configure traps for PTP packets (event and
general messages). The helper is shared between all Spectrum
generations.
Patch #2 transitions Spectrum-2 and newer ASICs to use a different
format of Tx completions that includes the UTC time stamp of transmitted
packets.
Patch #3 adds basic initialization required for Spectrum-2 PTP support.
It mainly invokes the helper from patch #1.
Patch #4 adds helpers to read the UTC time (seconds and nanoseconds)
from the device over memory-mapped I/O instead of going through firmware
which is slower and therefore inaccurate. The helpers will be used to
implement various PHC operations (e.g., gettimex64) and to construct the
full UTC time stamp from the truncated one reported over Tx / Rx
completions.
Patch #5 implements the various PHC operations.
Patch #6 implements the previously described workaround for
Spectrum-{2,3}.
Patch #7 adds the ability to report a hardware time stamp for a received
/ transmitted packet based off the associated Rx / Tx completion that
includes a truncated UTC time stamp.
Patches #8 and #9 implement support for the SIOCGHWTSTAMP /
SIOCSHWTSTAMP ioctls and the get_ts_info ethtool callback, respectively.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 27 Jul 2022 06:23:28 +0000 (09:23 +0300)]
mlxsw: spectrum: Support ethtool 'get_ts_info' callback in Spectrum-2
The 'get_ts_info' callback is used for obtaining information about
time stamping and PTP hardware clock capabilities of a network device.
The existing function of Spectrum-1 is used to advertise the PHC
capabilities and the supported RX and TX filters. Implement a similar
function for Spectrum-2, expose that the supported 'rx_filters' are all
PTP event packets, as for these packets the driver fills the time stamp
from the CQE in the SKB.
In the future, mlxsw driver will be extended to support one-step PTP in
Spectrum-2 and newer ASICs. Then additional 'tx_types' will be supported.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 27 Jul 2022 06:23:27 +0000 (09:23 +0300)]
mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls
The SIOCSHWTSTAMP ioctl configures HW timestamping on a given port. In
Spectrum-2 and above, each packet gets time stamp by default, but in
order to provide an accurate time stamp, software should configure to
update the correction field. In addition, the PTP traps are not enabled
by default, software should enable it per port or for all ports.
The switch behaves like a transparent clock between CPU port and each
front panel port. If ingress correction is set on a port for a given packet
type, then when such a packet is received via the port, the current time
stamp is subtracted from the correction field. If egress correction is set
on a port for a given packet type, then when such a packet is transmitted
via the port, the current time stamp is added to the correction field.
The result is that as the packet ingresses through a port with ingress
correction enabled, and egresses through a port with egress correction
enabled, the PTP correction field is updated to reflect the time that the
packet spent in the ASIC.
This can be used to update the correction field of trapped packets by
enabling ingress correction on a port where time stamping was enabled,
and egress correction on the CPU port. Similarly, for packets transmitted
from the host, ingress correction should be enabled on the CPU port, and
egress correction on a front-panel port.
However, since the correction fields will be updated for all PTP packets
crossing the CPU port, in order not to mangle the correction field, the
front panel port involved in the packet transfer must have the
corresponding correction enabled as well.
Therefore, when HW timestamping is enabled on at least one port, we have
to configure hardware to update the correction field and trap PTP event
packets on all ports.
Add reference count as part of 'struct mlxsw_sp_ptp_state', to maintain
how many ports use HW timestamping. Handle the correction field
configuration only when the first port enables time stamping and when the
last port disables time stamping. Store the configuration as part of
'struct mlxsw_sp_ptp_state', as it is global for all ports.
The SIOCGHWTSTAMP ioctl is a getter for the current configuration,
implement it and use the global configuration.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 27 Jul 2022 06:23:26 +0000 (09:23 +0300)]
mlxsw: spectrum: Support time stamping on Spectrum-2
As opposed to Spectrum-1, in which time stamps arrive through a pair of
dedicated events into a queue and later are being matched to the
corresponding packets, in Spectrum-2 we are reading the time stamps
directly from the CQE. Software can get the time stamp in UTC format
using CQEv2.
Add a time stamp field to 'struct mlxsw_skb_cb'. In
mlxsw_pci_cqe_{rdq,sdq}_handle() extract the time stamp from the CQE into
the new time stamp field. Note that the time stamp in the CQE is
represented by 38 bits, which is a short representation of UTC time.
Software should create the full time stamp using the global UTC clock.
Read UTC clock from hardware only for PTP packets which were trapped to CPU
with PTP0 trap ID (event packets).
Use the time stamp from the SKB when packet is received or transmitted.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 27 Jul 2022 06:23:25 +0000 (09:23 +0300)]
mlxsw: Send PTP packets as data packets to overcome a limitation
In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are
sent as control packets is not updated at egress port. To overcome this
limitation, PTP packets which require time stamp, should be sent as data
packets with the following details:
1. FID valid = 1
2. FID value above the maximum FID
3. rx_router_port = 1
>From Spectrum-4 and on, this limitation will be solved.
Extend the function which handles TX header, in case that the packet is
a PTP packet, add TX header with type=data and all the above mentioned
requirements. Add operation as part of 'struct mlxsw_sp_ptp_ops', to be
able to separate the handling of PTP packets between different ASICs. Use
the data packet solution only for Spectrum-2 and Spectrum-3. Therefore, add
a dedicated operation structure for Spectrum-4, as it will be same to
Spectrum-2 in PTP implementation, just will not have the limitation of
control packets.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 27 Jul 2022 06:23:24 +0000 (09:23 +0300)]
mlxsw: spectrum_ptp: Add implementation for physical hardware clock operations
Implement physical hardware clock operations. The main difference between
the existing operations of Spectrum-1 and the new operations of Spectrum-2
is the usage of UTC hardware clock instead of FRC.
Add support for init() and fini() functions for PTP clock in Spectrum-2.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 27 Jul 2022 06:23:23 +0000 (09:23 +0300)]
mlxsw: Query UTC sec and nsec PCI offsets and values
Query UTC sec and nsec PCI offsets during the pci_init(), to be able to
read UTC time later.
Implement functions to read UTC seconds and nanoseconds from the offset
which was read as part of initialization.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 27 Jul 2022 06:23:22 +0000 (09:23 +0300)]
mlxsw: spectrum_ptp: Add PTP initialization / finalization for Spectrum-2
Lay the groundwork for Spectrum-2 support. On Spectrum-2, the packets get
the time stamps from the CQE, which means that the time stamp is attached
to its packet.
Configure MTPTPT to set which message types should arrive under which
PTP trap. PTP0 will be used for event message types, which means that
the packets require time stamp. PTP1 will be used for other packets.
Note that in Spectrum-2, all packets contain time stamp by default. The two
types of traps (PTP0, PTP1) will be used to separate between PTP_EVENT
traps and PTP_GENERAL traps, so then the driver will fill the time stamp as
part of the SKB only for event message types.
Later the driver will enable the traps using 'MTPCPC.ptp_trap_en' bit.
Then, PTP packets start arriving through the PTP traps.
Currently, the structure 'mlxsw_sp2_ptp_state' contains only the common
structure, the next patches will extend it.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 27 Jul 2022 06:23:21 +0000 (09:23 +0300)]
mlxsw: Support CQEv2 for SDQ in Spectrum-2 and newer ASICs
Currently, Tx completions are reported using Completion Queue Element
version 1 (CQEv1). These elements do not contain the Tx time stamp,
which is fine as Spectrum-1 reads Tx time stamps via a dedicated FIFO
and Spectrum-2 does not currently support PTP.
In preparation for Spectrum-2 PTP support, use CQEv2 for Spectrum-2 and
newer ASICs, as this CQE format encodes the Tx time stamp.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Wed, 27 Jul 2022 06:23:20 +0000 (09:23 +0300)]
mlxsw: spectrum_ptp: Add helper functions to configure PTP traps
MTPTPT register is used to set which message types should arrive under
which PTP trap. Currently, PTP0 is used for event message types, which
means that the packets require time stamp. PTP1 is used for other packets.
This configuration will be same for Spectrum-2 and newer ASICs. In
preparation for Spectrum-2 PTP support, add helper functions to
configure PTP traps and use them for Spectrum-1. These functions will be
used later also for Spectrum-2.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof Kozlowski [Wed, 27 Jul 2022 16:41:29 +0000 (18:41 +0200)]
dt-bindings: nfc: use spi-peripheral-props.yaml
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727164130.385411-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 29 Jul 2022 05:24:41 +0000 (22:24 -0700)]
Merge branch 'net-dsa-qca8k-code-split-for-qca8k'
Christian Marangi says:
====================
net: dsa: qca8k: code split for qca8k
This is needed ad ipq4019 SoC have an internal switch that is
based on qca8k with very minor changes. The general function is equal.
Because of this we split the driver to common and specific code.
As the common function needs to be moved to a different file to be
reused, we had to convert every remaining user of qca8k_read/write/rmw
to regmap variant.
We had also to generilized the special handling for the ethtool_stats
function that makes use of the autocast mib. (ipq4019 will have a
different tagger and use mmio so it could be quicker to use mmio instead
of automib feature)
And we had to convert the regmap read/write to bulk implementation to
drop the special function that makes use of it. This will be compatible
with ipq4019 and at the same time permits normal switch to use the eth
mgmt way to send the entire ATU table read/write in one go.
====================
Link: https://lore.kernel.org/r/20220727113523.19742-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Wed, 27 Jul 2022 11:35:23 +0000 (13:35 +0200)]
net: dsa: qca8k: move read_switch_id function to common code
The same function to read the switch id is used by drivers based on
qca8k family switch. Move them to common code to make them accessible
also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Wed, 27 Jul 2022 11:35:22 +0000 (13:35 +0200)]
net: dsa: qca8k: move port LAG functions to common code
The same port LAG functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Wed, 27 Jul 2022 11:35:21 +0000 (13:35 +0200)]
net: dsa: qca8k: move port VLAN functions to common code
The same port VLAN functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Also drop exposing busy_wait and make it static.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Wed, 27 Jul 2022 11:35:20 +0000 (13:35 +0200)]
net: dsa: qca8k: move port mirror functions to common code
The same port mirror functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Wed, 27 Jul 2022 11:35:19 +0000 (13:35 +0200)]
net: dsa: qca8k: move port FDB/MDB function to common code
The same port FDB/MDB function are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Also drop bulk read/write functions and make them static
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Wed, 27 Jul 2022 11:35:18 +0000 (13:35 +0200)]
net: dsa: qca8k: move set age/MTU/port enable/disable functions to common code
The same set age, MTU and port enable/disable function are used by
driver based on qca8k family switch.
Move them to common code to make them accessible also by other drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Wed, 27 Jul 2022 11:35:17 +0000 (13:35 +0200)]
net: dsa: qca8k: move bridge functions to common code
The same bridge functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Wed, 27 Jul 2022 11:35:16 +0000 (13:35 +0200)]
net: dsa: qca8k: move port set status/eee/ethtool stats function to common code
The same logic to disable/enable port, set eee and get ethtool stats is
used by drivers based on qca8k family switch.
Move it to common code to make it accessible also by other drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>