review.tizen.org Git - platform/kernel/linux-rpi.git/log

Merge tag 'arm-fixes-6.3-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"As usual, most of the bug fixes address issues in the devicetree
  files, and out of these, most are for the Qualcomm and NXP platforms,
  including:

   - A missing 'reserved-memory' property on LG G Watch R that is needed
     to prevent clashing with firmware

   - Annotations for cache coherency on multiple machines

   - Corrections for pinctrl, regulator, clock, iommu and power domain
     properties for i.MX and Qualcomm to correctly reflect the hardware
     settings

   - Firmware file names on multiple machines SA8540P Ride board

   - An incompatible change to the qcom vadc driver requires adding
     individual labels

   - Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
     and switch to the new bindings.

   - A fix for PCI bus address translation Tegra194 and Tegra234.

  There are also a couple of device driver fixes, addressing:

   - A race condition in the amdtee driver

   - A performance regression in the Qualcomm 'llcc' driver

   - An unitialized variable use NXP i.MX 'weim' driver

   - Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
     the Arm scmi firmware driver"

* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
  arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
  arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
  bus: imx-weim: fix branch condition evaluates to a garbage value
  arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
  ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
  ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
  arm64: dts: imx93: Fix eqos properties
  arm64: dts: imx8mp: Fix LCDIF2 node clock order
  arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
  arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
  firmware: qcom: scm: fix bogus irq error at probe
  arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
  arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
  arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
  ...

Merge tag 'for-v6.3-rc' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply fixes from Sebastian Reichel:

- rk817: Fix compiler warning

- cros_usbpd-charger: Fix excessive error printing

- axp288_fuel_gauge: handle platform_get_irq error

- bq24190 and da9150: Fix race condition in remove path

* tag 'for-v6.3-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: da9150: Fix use after free bug in da9150_charger_remove due to race condition
  power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition
  power: supply: axp288_fuel_gauge: Added check for negative values
  power: supply: cros_usbpd: reclassify "default case!" as debug
  power: supply: rk817: Fix unsigned comparison with less than zero

Merge tag 'drm-fixes-2023-03-24' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Daniel Vetter:

- usual pile of fixes for amdgpu & i915

- probe error handling fixes for meson, lt8912b bridge

- the host1x patch from Arnd

- panel-orientation fix for Lenovo Book X90F

* tag 'drm-fixes-2023-03-24' of git://anongit.freedesktop.org/drm/drm: (23 commits)
  gpu: host1x: fix uninitialized variable use
  drm/amd/display: Set dcn32 caps.seamless_odm
  drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk
  drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi
  drm/amd/display: remove outdated 8bpc comments
  drm/amdgpu/gfx: set cg flags to enter/exit safe mode
  drm/amdgpu: Force signal hw_fences that are embedded in non-sched jobs
  drm/amdgpu: add mes resume when do gfx post soft reset
  drm/amdgpu: skip ASIC reset for APUs when go to S4
  drm/amdgpu: reposition the gpu reset checking for reuse
  drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found
  drm/meson: fix missing component unbind on bind errors
  drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Book X90F
  Revert "drm/i915/hwmon: Enable PL1 power limit"
  drm/i915: Update vblank timestamping stuff on seamless M/N change
  drm/i915: Fix format for perf_limit_reasons
  drm/i915/gt: perform uc late init after probe error injection
  drm/i915/active: Fix missing debug object activation
  drm/i915/guc: Fix missing ecodes
  drm/i915/mtl: Disable MC6 for MTL A step
  ...

Merge tag 'for-6.3/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- Fix DM thin to work as a swap device by using 'limit_swap_bios' DM
   target flag (initially added to allow swap to dm-crypt) to throttle
   the amount of outstanding swap bios.

- Fix DM crypt soft lockup warnings by calling cond_resched() from the
   cpu intensive loop in dmcrypt_write().

- Fix DM crypt to not access an uninitialized tasklet. This fix allows
   for consistent handling of IO completion, by _not_ needlessly punting
   to a workqueue when tasklets are not needed.

- Fix DM core's alloc_dev() initialization for DM stats to check for
   and propagate alloc_percpu() failure.

* tag 'for-6.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm stats: check for and propagate alloc_percpu failure
  dm crypt: avoid accessing uninitialized tasklet
  dm crypt: add cond_resched() to dmcrypt_write()
  dm thin: fix deadlock when swapping to thin device

Merge tag 'block-6.3-2023-03-24' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- NVMe pull request via Christoph:
     - Send Identify with CNS 06h only to I/O controllers (Martin
       George)
     - Fix nvme_tcp_term_pdu to match spec (Caleb Sander)

- Pass in issue_flags for uring_cmd, so the end_io handlers don't need
   to assume what the right context is (me)

- Fix for ublk, marking it as LIVE before adding it to avoid races on
   the initial IO (Ming)

* tag 'block-6.3-2023-03-24' of git://git.kernel.dk/linux:
  nvme-tcp: fix nvme_tcp_term_pdu to match spec
  nvme: send Identify with CNS 06h only to I/O controllers
  block/io_uring: pass in issue_flags for uring_cmd task_work handling
  block: ublk_drv: mark device as LIVE before adding disk

Merge tag 'io_uring-6.3-2023-03-24' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:

- Fix an issue with repeated -ECONNREFUSED on a socket (me)

- Fix a NULL pointer deference due to a stale lookup cache for
   allocating direct descriptors (Savino)

* tag 'io_uring-6.3-2023-03-24' of git://git.kernel.dk/linux:
  io_uring/rsrc: fix null-ptr-deref in io_file_bitmap_get()
  io_uring/net: avoid sending -ECONNABORTED on repeated connection requests

Merge tag 'thermal-6.3-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull thermal control fixes from Rafael Wysocki:
"These address two recent regressions related to thermal control.

  Specifics:

   - Restore the thermal core behavior regarding zero-temperature trip
     points to avoid a driver regression (Ido Schimmel)

   - Fix a recent regression in the ACPI processor driver preventing it
     from changing the number of CPU cooling device states exposed via
     sysfs after the given CPU cooling device has been registered
     (Rafael Wysocki)"

* tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: core: Restore behavior regarding invalid trip points
  ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
  thermal: core: Introduce thermal_cooling_device_update()
  thermal: core: Introduce thermal_cooling_device_present()
  ACPI: processor: Reorder acpi_processor_driver_init()

Merge tag 'acpi-6.3-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"These add new ACPI IRQ override and backlight detection quirks.

  Specifics:

   - Add backlight=native DMI quirk for Acer Aspire 3830TG to the ACPI
     backlight driver (Hans de Goede)

   - Add an ACPI IRQ override quirk for Medion S17413 (Aymeric Wibo)"

* tag 'acpi-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Add Medion S17413 to IRQ override quirk
  ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG

Merge tag 'slab-fix-for-6.3-rc4' of git://git./linux/kernel/git/vbabka/slab

Pull slab fix from Vlastimil Babka:
"A single build fix for a corner case configuration that is apparently
possible to achieve on some arches, from Geert"

* tag 'slab-fix-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: Fix undefined init_cache_node_node() for NUMA and !SMP

Merge tag 'efi-fixes-for-v6.3-1' of git://git./linux/kernel/git/efi/efi

Pull EFI fixes from Ard Biesheuvel:

- Set the NX compat flag for arm64 and zboot, to ensure compatibility
   with EFI firmware that complies with tightening requirements imposed
   across the ecosystem.

- Improve identification of Ampere Altra systems based on SMBIOS data.

- Fix some issues related to the EFI framebuffer that were introduced
   as a result from some refactoring related to zboot and the merge with
   sysfb.

- Makefile tweak to avoid rebuilding vmlinuz unnecessarily.

- Fix efi_random_alloc() return value on out of memory condition.

* tag 'efi-fixes-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/libstub: randomalloc: Return EFI_OUT_OF_RESOURCES on failure
  efi/libstub: Use relocated version of kernel's struct screen_info
  efi/libstub: zboot: Add compressed image to make targets
  efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L
  efi: sysfb_efi: Fix DMI quirks not working for simpledrm
  efi/libstub: smbios: Drop unused 'recsize' parameter
  arm64: efi: Use SMBIOS processor version to key off Ampere quirk
  efi/libstub: smbios: Use length member instead of record struct size
  efi: earlycon: Reprobe after parsing config tables
  arm64: efi: Set NX compat flag in PE/COFF header
  efi/libstub: arm64: Remap relocated image with strict permissions
  efi/libstub: zboot: Mark zboot EFI application as NX compatible

Merge tag 'qcom-driver-fixes-for-6.3' of https://git./linux/kernel/git/qcom/linux into soc/fixes

Qualcomm driver fixes for v6.3

Support for the secure world interrupting the SCM driver drive the wait
queue mechanism was recently introduced, but most platforms doesn't have
this mechanism and an error should not be printed in the log.

The rmtfs_mem driver recently gained support for assigning the region to
multiple VMIDs, but accidentally removed the support for running without
assignment. A couple of changes are introducd to correct this.

The SC8280XP LLCC slice configuration is wrong, reslting in incorrect
configuration of the hardware. The table is corrected, based on the
datasheet.

* tag 'qcom-driver-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  firmware: qcom: scm: fix bogus irq error at probe
  soc: qcom: rmtfs: handle optional qcom,vmid correctly
  soc: qcom: rmtfs: fix error handling reading qcom,vmid
  soc: qcom: llcc: Fix slice configuration values for SC8280XP

Link: https://lore.kernel.org/r/20230323142505.1086072-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-fixes-for-6.3' of https://git./linux/kernel/git/qcom/linux into soc/fixes

Qualcomm ARM32 Devicetree fixes for v6.3

This introduces missing reserved-memory ranges on LG G Watch R,
resolving stability issues caused by Linux reusing memory used by
firmware.

* tag 'qcom-dts-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: apq8026-lg-lenok: add missing reserved memory

Link: https://lore.kernel.org/r/20230323141922.1085875-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-fixes-for-6.3' of https://git./linux/kernel/git/qcom/linux into soc/fixes

Qualcomm ARM64 Devicetree fixes for v6.3

This correct SIM card selection on the two newly introduced
MSM8916-based USB modems.

The firmware-name for the first CDSP is corrected on the SA8540P Ride
board.

The PCIe controller in SC7280 is marked cache-coherent, which resolves
seen data corruption issues.

Labels are added to the vadc channel nodes on SC8280XP, as the Linux
driver was updated to not include the unit address when generating
device names and collisions thereby prevented registration of the
channels. Audio clocks and routing is corrected and a few regulators are
marked always-on for the Lenovo Thinkpad X13s, as their clients are not
fully described at this point.

SPI5 was accidentally enabled by default on SM6115, and is disabled
again.

CDSP on SM6375 is provided its power-domains, to appropriately vote for
during power up for the DSP.

The iommu mask for the PCIe controllers in SM8150 is updated, to match
what the hypervisor expects.

Th Venus firmware path is corrected on Xiaomi Mi Pad 5 Pro.

The UFS controller is marked cache coherent on SM8350 and SM8450.

The clocks for the second WSA macro on SM8450 is corrected, and given
its own clocks.

The bias-pull-up value for I2C pins are corrected on SM8550, to trigger
the selection of the strong pull. CPU compatibles and the base address
of the LPASS TLMM block are corrected.

* tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
  arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
  arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
  arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
  arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
  arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
  arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
  arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing
  arm64: dts: qcom: sc8280xp-x13s: fix dmic sample rate
  arm64: dts: qcom: sc8280xp: fix lpass tx macro clocks
  arm64: dts: qcom: sc8280xp: fix rx frame shapping info
  arm64: dts: qcom: sm8450: correct WSA2 assigned clocks
  arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent
  arm64: dts: qcom: msm8916-ufi: Fix sim card selection pinctrl
  arm64: dts: qcom: sm8250-xiaomi-elish: Correct venus firmware path
  arm64: dts: qcom: sm8550: Use correct CPU compatibles
  arm64: dts: qcom: sm8550: Add bias pull up value to tlmm i2c data clk states
  arm64: dts: qcom: sm6375: Add missing power-domain-named to CDSP
  ...

Link: https://lore.kernel.org/r/20230323141642.1085684-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'riscv-for-linus-6.3-rc4' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- A fix to match the CSR ASID masking rules when passing ASIDs to
   firmware

- Force GCC to use ISA 2.2, to avoid a host of compatibily issues
   between toolchains

* tag 'riscv-for-linus-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Handle zicsr/zifencei issues between clang and binutils
  riscv: mm: Fix incorrect ASID argument when flushing TLB

Merge tag 'for-linus-6.3-rc4-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

- fix build warning

- avoid concurrent accesses to the Xen PV console ring page

* tag 'for-linus-6.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/PVH: avoid 32-bit build warning when obtaining VGA console info
hvc/xen: prevent concurrent accesses to the shared ring

Merge branch 'thermal-acpi'

Merge a fix for a recent thermal-related regression in the ACPI
processor driver.

* thermal-acpi:
  ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
  thermal: core: Introduce thermal_cooling_device_update()
  thermal: core: Introduce thermal_cooling_device_present()
  ACPI: processor: Reorder acpi_processor_driver_init()

Merge branch 'acpi-video'

Merge an ACPI backlight quirk for Acer Aspire 3830TG (Hans de Goede).

* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG

ACPI: resource: Add Medion S17413 to IRQ override quirk

Add DMI info of the Medion S17413 (board M1xA) to the IRQ override
quirk table. This fixes the keyboard not working on these laptops.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Signed-off-by: Aymeric Wibo <obiwac@gmail.com>
[ rjw: Fixed up white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'tag-chrome-platform-fixes-for-v6.3-rc4' of git://git./linux/kernel/git/chrome-platform/linux

Pull chrome platform fix from Tzung-Bi Shih:
"Fix a kernel data leak vulnerability"

* tag 'tag-chrome-platform-fixes-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl

Merge tag 'i2c-for-6.3-rc4' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"A set of regular driver fixes"

* tag 'i2c-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()
  i2c: hisi: Only use the completion interrupt to finish the transfer
  i2c: hisi: Avoid redundant interrupts
  i2c: mxs: ensure that DMA buffers are safe for DMA
  i2c: imx-lpi2c: check only for enabled interrupt flags
  i2c: imx-lpi2c: clean rx/tx buffers upon new message

Merge tag 'net-6.3-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi and bluetooth.

  Current release - regressions:

   - wifi: mt76: mt7915: add back 160MHz channel width support for
     MT7915

   - libbpf: revert poisoning of strlcpy, it broke uClibc-ng

  Current release - new code bugs:

   - bpf: improve the coverage of the "allow reads from uninit stack"
     feature to fix verification complexity problems

   - eth: am65-cpts: reset PPS genf adj settings on enable

  Previous releases - regressions:

   - wifi: mac80211: serialize ieee80211_handle_wake_tx_queue()

   - wifi: mt76: do not run mt76_unregister_device() on unregistered hw,
     fix null-deref

   - Bluetooth: btqcomsmd: fix command timeout after setting BD address

   - eth: igb: revert rtnl_lock() that causes a deadlock

   - dsa: mscc: ocelot: fix device specific statistics

  Previous releases - always broken:

   - xsk: add missing overflow check in xdp_umem_reg()

   - wifi: mac80211:
      - fix QoS on mesh interfaces
      - fix mesh path discovery based on unicast packets

   - Bluetooth:
      - ISO: fix timestamped HCI ISO data packet parsing
      - remove "Power-on" check from Mesh feature

   - usbnet: more fixes to drivers trusting packet length

   - wifi: iwlwifi: mvm: fix mvmtxq->stopped handling

   - Bluetooth: btintel: iterate only bluetooth device ACPI entries

   - eth: iavf: fix inverted Rx hash condition leading to disabled hash

   - eth: igc: fix the validation logic for taprio's gate list

   - dsa: tag_brcm: legacy: fix daisy-chained switches

  Misc:

   - bpf: adjust insufficient default bpf_jit_limit to account for
     growth of BPF use over the last 5 years

   - xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating
     no driver support"

* tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  Bluetooth: HCI: Fix global-out-of-bounds
  Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
  Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
  Bluetooth: L2CAP: Fix responding with wrong PDU type
  Bluetooth: btqcomsmd: Fix command timeout after setting BD address
  Bluetooth: btinel: Check ACPI handle for NULL before accessing
  net: mdio: thunder: Add missing fwnode_handle_put()
  net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case
  net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()
  net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()
  net: asix: fix modprobe "sysfs: cannot create duplicate filename"
  gve: Cache link_speed value from device
  tools: ynl: Fix genlmsg header encoding formats
  net: enetc: fix aggregate RMON counters not showing the ranges
  Bluetooth: Remove "Power-on" check from Mesh feature
  Bluetooth: Fix race condition in hci_cmd_sync_clear
  Bluetooth: btintel: Iterate only bluetooth device ACPI entries
  Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
  Bluetooth: btusb: Remove detection of ISO packets over bulk
  Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
  ...

Merge tag 'for-6.3-rc3-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A few more fixes, the zoned accounting fix is spread across a few
  patches, preparatory and the actual fixes:

   - zoned mode:
      - fix accounting of unusable zone space
      - fix zone activation condition for DUP profile
      - preparatory patches

   - improved error handling of missing chunks

   - fix compiler warning"

* tag 'for-6.3-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: drop space_info->active_total_bytes
  btrfs: zoned: count fresh BG region as zone unusable
  btrfs: use temporary variable for space_info in btrfs_update_block_group
  btrfs: rename BTRFS_FS_NO_OVERCOMMIT to BTRFS_FS_ACTIVE_ZONE_TRACKING
  btrfs: zoned: fix btrfs_can_activate_zone() to support DUP profile
  btrfs: fix compiler warning on SPARC/PA-RISC handling fscrypt_setup_filename
  btrfs: handle missing chunk mapping more gracefully

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers.

  The core fix adds a UFS device to an existing quirk to avoid a huge
  delay on boot"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate()
  scsi: qla2xxx: Synchronize the IOCB count to be in order
  scsi: qla2xxx: Perform lockless command completion in abort path
  scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMR

gpu: host1x: fix uninitialized variable use

The error handling for platform_get_irq() failing no longer
works after a recent change, clang now points this out with
a warning:

drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized]
if (syncpt_irq < 0)
^~~~~~~~~~

Fix this by removing the variable and checking the correct
error status.

Fixes: 625d4ffb438c ("gpu: host1x: Rewrite syncpoint interrupt handling")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127221418.2522612-1-arnd@kernel.org

Merge tag 'amd-drm-fixes-6.3-2023-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.3-2023-03-23:

amdgpu:
- S4 fix
- Soft reset fixes
- SR-IOV fix
- Remove an out of date comment in the DC code
- ASPM fix
- DCN 3.2 fixes

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323161939.7751-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2023-03-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v6.3-rc4:
- Fix an MTL workaround
- Fix fbdev obj locking before vma pin
- Fix state inheritance tracking in initial commit
- Fix missing GuC error capture codes
- Fix missing debug object activation
- Fix uc init late order relative to probe error injection
- Fix perf limit reasons formatting
- Fix vblank timestamp update on seamless M/N changes

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/878rfn7njw.fsf@intel.com

Merge tag 'drm-misc-fixes-2023-03-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Short summary of fixes pull:

* fixes for bind and probing error handling for meson, lt8912b bridge
* panel-orientation fixes for Lenovo Book X90F

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323082401.GA8371@linux-uq9g

platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl

It is possible to peep kernel page's data by providing larger `insize`
in struct cros_ec_command[1] when invoking EC host commands.

Fix it by using zeroed memory.

[1]: https://elixir.bootlin.com/linux/v6.2/source/include/linux/platform_data/cros_ec_proto.h#L74

Fixes: eda2e30c6684 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230324010658.1082361-1-tzungbi@kernel.org

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2023-03-23

We've added 8 non-merge commits during the last 13 day(s) which contain
a total of 21 files changed, 238 insertions(+), 161 deletions(-).

The main changes are:

1) Fix verification issues in some BPF programs due to their stack usage
   patterns, from Eduard Zingerman.

2) Fix to add missing overflow checks in xdp_umem_reg and return an error
   in such case, from Kal Conley.

3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for
   libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia.

4) Fix insufficient bpf_jit_limit default to avoid users running into hard
   to debug seccomp BPF errors, from Daniel Borkmann.

5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc
   to make it unambiguous from other errors, from Jesper Dangaard Brouer.

6) Two BPF selftest fixes to address compilation errors from recent changes
   in kernel structures, from Alexei Starovoitov.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support
  bpf: Adjust insufficient default bpf_jit_limit
  xsk: Add missing overflow check in xdp_umem_reg
  selftests/bpf: Fix progs/test_deny_namespace.c issues.
  selftests/bpf: Fix progs/find_vma_fail1.c build error.
  libbpf: Revert poisoning of strlcpy
  selftests/bpf: Tests for uninitialized stack reads
  bpf: Allow reads from uninit stack
====================

Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-2023-03-23' of git://git./linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

- Fix MGMT add advmon with RSSI command
- L2CAP: Fix responding with wrong PDU type
- Fix race condition in hci_cmd_sync_clear
- ISO: Fix timestamped HCI ISO data packet parsing
- HCI: Fix global-out-of-bounds
- hci_sync: Resume adv with no RPA when active scan

* tag 'for-net-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: HCI: Fix global-out-of-bounds
  Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
  Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
  Bluetooth: L2CAP: Fix responding with wrong PDU type
  Bluetooth: btqcomsmd: Fix command timeout after setting BD address
  Bluetooth: btinel: Check ACPI handle for NULL before accessing
  Bluetooth: Remove "Power-on" check from Mesh feature
  Bluetooth: Fix race condition in hci_cmd_sync_clear
  Bluetooth: btintel: Iterate only bluetooth device ACPI entries
  Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
  Bluetooth: btusb: Remove detection of ISO packets over bulk
  Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
  Bluetooth: hci_sync: Resume adv with no RPA when active scan
====================

Link: https://lore.kernel.org/r/20230323202335.3380841-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-2023-03-23' of git://git./linux/kernel/git/wireless/wireless

Kalle Valo says:

====================
wireless fixes for v6.3

Third set of fixes for v6.3. mt76 has two kernel crash fixes and
adding back 160 MHz channel support for mt7915. mac80211 has fixes for
a race in transmit path and two mesh related fixes. iwlwifi also has
fixes for races.

* tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: fix mesh path discovery based on unicast packets
  wifi: mac80211: fix qos on mesh interfaces
  wifi: iwlwifi: mvm: protect TXQ list manipulation
  wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
  wifi: mac80211: Serialize ieee80211_handle_wake_tx_queue()
  wifi: mwifiex: mark OF related data as maybe unused
  wifi: mt76: connac: do not check WED status for non-mmio devices
  wifi: mt76: mt7915: add back 160MHz channel width support for MT7915
  wifi: mt76: do not run mt76_unregister_device() on unregistered hw
====================

Link: https://lore.kernel.org/r/20230323110332.C4FE4C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'gfs2-v6.3-rc3-fix' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fix from Andreas Gruenbacher:

- Reinstate commit 970343cd4904 ("GFS2: free disk inode which is
   deleted by remote node -V2") as reverting that commit could cause
   gfs2_put_super() to hang.

* tag 'gfs2-v6.3-rc3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  Reinstate "GFS2: free disk inode which is deleted by remote node -V2"

Bluetooth: HCI: Fix global-out-of-bounds

To loop a variable-length array, hci_init_stage_sync(stage) considers
that stage[i] is valid as long as stage[i-1].func is valid.
Thus, the last element of stage[].func should be intentionally invalid
as hci_init0[], le_init2[], and others did.
However, amp_init1[] and amp_init2[] have no invalid element, letting
hci_init_stage_sync() keep accessing amp_init1[] over its valid range.
This patch fixes this by adding {} in the last of amp_init1[] and
amp_init2[].

==================================================================
BUG: KASAN: global-out-of-bounds in hci_dev_open_sync (
/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
/v6.2-bzimage/net/bluetooth/hci_sync.c:3343
/v6.2-bzimage/net/bluetooth/hci_sync.c:4418
/v6.2-bzimage/net/bluetooth/hci_sync.c:4609
/v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
Read of size 8 at addr ffffffffaed1ab70 by task kworker/u5:0/1032
CPU: 0 PID: 1032 Comm: kworker/u5:0 Not tainted 6.2.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04
Workqueue: hci1 hci_power_on
Call Trace:
<TASK>
dump_stack_lvl (/v6.2-bzimage/lib/dump_stack.c:107 (discriminator 1))
print_report (/v6.2-bzimage/mm/kasan/report.c:307
  /v6.2-bzimage/mm/kasan/report.c:417)
? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
  /v6.2-bzimage/net/bluetooth/hci_sync.c:3343
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4418
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4609
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
kasan_report (/v6.2-bzimage/mm/kasan/report.c:184
  /v6.2-bzimage/mm/kasan/report.c:519)
? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
  /v6.2-bzimage/net/bluetooth/hci_sync.c:3343
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4418
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4609
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
  /v6.2-bzimage/net/bluetooth/hci_sync.c:3343
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4418
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4609
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
? __pfx_hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:4635)
? mutex_lock (/v6.2-bzimage/./arch/x86/include/asm/atomic64_64.h:190
  /v6.2-bzimage/./include/linux/atomic/atomic-long.h:443
  /v6.2-bzimage/./include/linux/atomic/atomic-instrumented.h:1781
  /v6.2-bzimage/kernel/locking/mutex.c:171
  /v6.2-bzimage/kernel/locking/mutex.c:285)
? __pfx_mutex_lock (/v6.2-bzimage/kernel/locking/mutex.c:282)
hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:485
  /v6.2-bzimage/net/bluetooth/hci_core.c:984)
? __pfx_hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:969)
? read_word_at_a_time (/v6.2-bzimage/./include/asm-generic/rwonce.h:85)
? strscpy (/v6.2-bzimage/./arch/x86/include/asm/word-at-a-time.h:62
  /v6.2-bzimage/lib/string.c:161)
process_one_work (/v6.2-bzimage/kernel/workqueue.c:2294)
worker_thread (/v6.2-bzimage/./include/linux/list.h:292
  /v6.2-bzimage/kernel/workqueue.c:2437)
? __pfx_worker_thread (/v6.2-bzimage/kernel/workqueue.c:2379)
kthread (/v6.2-bzimage/kernel/kthread.c:376)
? __pfx_kthread (/v6.2-bzimage/kernel/kthread.c:331)
ret_from_fork (/v6.2-bzimage/arch/x86/entry/entry_64.S:314)
</TASK>
The buggy address belongs to the variable:
amp_init1+0x30/0x60
The buggy address belongs to the physical page:
page:000000003a157ec6 refcount:1 mapcount:0 mapping:0000000000000000 ia
flags: 0x200000000001000(reserved|node=0|zone=2)
raw: 0200000000001000 ffffea0005054688 ffffea0005054688 000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffffffaed1aa00: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 00
ffffffffaed1aa80: 00 00 00 00 f9 f9 f9 f9 00 00 00 00 00 00 00 00
>ffffffffaed1ab00: 00 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 f9 f9
                                                             ^
ffffffffaed1ab80: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 f9
ffffffffaed1ac00: f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9 00 00 02 f9

This bug is found by FuzzBT, a modified version of Syzkaller.
Other contributors for this bug are Ruoyu Wu and Peng Hui.

Fixes: d0b137062b2d ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: mgmt: Fix MGMT add advmon with RSSI command

The MGMT command: MGMT_OP_ADD_ADV_PATTERNS_MONITOR_RSSI uses variable
length argument. This causes host not able to register advmon with rssi.

This patch has been locally tested by adding monitor with rssi via
btmgmt on a kernel 6.1 machine.

Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work

In btsdio_probe, &data->work was bound with btsdio_work.In
btsdio_send_frame, it was started by schedule_work.

If we call btsdio_remove with an unfinished job, there may
be a race condition and cause UAF bug on hdev.

Fixes: ddbaf13e3609 ("[Bluetooth] Add generic driver for Bluetooth SDIO devices")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: L2CAP: Fix responding with wrong PDU type

L2CAP_ECRED_CONN_REQ shall be responded with L2CAP_ECRED_CONN_RSP not
L2CAP_LE_CONN_RSP:

L2CAP LE EATT Server - Reject - run
  Listening for connections
  New client connection with handle 0x002a
  Sending L2CAP Request from client
  Client received response code 0x15
  Unexpected L2CAP response code (expected 0x18)
L2CAP LE EATT Server - Reject - test failed

> ACL Data RX: Handle 42 flags 0x02 dlen 26
      LE L2CAP: Enhanced Credit Connection Request (0x17) ident 1 len 18
        PSM: 39 (0x0027)
        MTU: 64
        MPS: 64
        Credits: 5
        Source CID: 65
        Source CID: 66
        Source CID: 67
        Source CID: 68
        Source CID: 69
< ACL Data TX: Handle 42 flags 0x00 dlen 16
      LE L2CAP: LE Connection Response (0x15) ident 1 len 8
        invalid size
        00 00 00 00 00 00 06 00

L2CAP LE EATT Server - Reject - run
  Listening for connections
  New client connection with handle 0x002a
  Sending L2CAP Request from client
  Client received response code 0x18
L2CAP LE EATT Server - Reject - test passed

Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btqcomsmd: Fix command timeout after setting BD address

On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c
and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs)
the Bluetooth firmware seems to become unresponsive for a while after
setting the BD address. On recent kernel versions (at least 5.17+)
this often causes timeouts for subsequent commands, e.g. the HCI reset
sent by the Bluetooth core during initialization:

Bluetooth: hci0: Opcode 0x c03 failed: -110

Unfortunately this behavior does not seem to be documented anywhere.
Experimentation suggests that the minimum necessary delay to avoid
the problem is ~150us. However, to be sure add a sleep for > 1ms
in case it is a bit longer on other firmware versions.

Older kernel versions are likely also affected, although perhaps with
slightly different errors or less probability. Side effects can easily
hide the issue in most cases, e.g. unrelated incoming interrupts that
cause the necessary delay.

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btinel: Check ACPI handle for NULL before accessing

Older platforms and Virtual platforms which doesn't have support for
bluetooth device in ACPI firmware will not have valid ACPI handle.
Check for validity of handle before accessing.

dmesg log from simics environment (virtual platform):

BUG: unable to handle kernel NULL pointer dereference at
0000000000000018
IP: acpi_ns_walk_namespace+0x5c/0x278
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
Modules linked in: bnep intel_powerclamp coretemp kvm_intel
kvm irqbypass intel_cstate input_leds joydev serio_raw mac_hid
btusb(OE) btintel(OE) bluetooth(OE) lpc_ich compat(OE) ecdh_generic
i7core_edac i5500_temp shpchp binfmt_misc sch_fq_codel parport_pc ppdev
lp parport ip_tables x_tables autofs4 hid_generic usbhid hid e1000e
psmouse ahci pata_acpi libahci ptp pps_core floppy
CPU: 0 PID: 35 Comm: kworker/u3:0 Tainted: G           OE
4.15.0-140-generic #144-Ubuntu
Hardware name: Simics Simics, BIOS Simics 01/01/2011
Workqueue: hci0 hci_power_on [bluetooth]
RIP: 0010:acpi_ns_walk_namespace+0x5c/0x278
RSP: 0000:ffffaa9c0049bba8 EFLAGS: 00010246
RAX: 0000000000000001 RBX: 0000000000001001 RCX: 0000000000000010
RDX: ffffffff92ea7e27 RSI: ffffffff92ea7e10 RDI: 00000000000000c8
RBP: ffffaa9c0049bbf8 R08: 0000000000000000 R09: ffffffffc05b39d0
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000000 R14: ffffffffc05b39d0 R15: ffffaa9c0049bc70
FS:  0000000000000000(0000) GS:ffff8be73fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000075f0e000 CR4: 00000000000006f0

Fixes: 294d749b5df5 ("Bluetooth: btintel: Iterate only bluetooth device ACPI entries")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

riscv: Handle zicsr/zifencei issues between clang and binutils

There are two related issues that appear in certain combinations with
clang and GNU binutils.

The first occurs when a version of clang that supports zicsr or zifencei
via '-march=' [1] (i.e, >= 17.x) is used in combination with a version
of GNU binutils that do not recognize zicsr and zifencei in the
'-march=' value (i.e., < 2.36):

  riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
  riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/file.o
  riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
  riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/super.o

The second occurs when a version of clang that does not support zicsr or
zifencei via '-march=' (i.e., <= 16.x) is used in combination with a
version of GNU as that defaults to a newer ISA base spec, which requires
specifying zicsr and zifencei in the '-march=' value explicitly (i.e, >=
2.38):

  ../arch/riscv/kernel/kexec_relocate.S: Assembler messages:
  ../arch/riscv/kernel/kexec_relocate.S:147: Error: unrecognized opcode `fence.i', extension `zifencei' required
  clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)

This is the same issue addressed by commit 6df2a016c0c8 ("riscv: fix
build with binutils 2.38") (see [2] for additional information) but
older versions of clang miss out on it because the cc-option check
fails:

  clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
  clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'

To resolve the first issue, only attempt to add zicsr and zifencei to
the march string when using the GNU assembler 2.38 or newer, which is
when the default ISA spec was updated, requiring these extensions to be
specified explicitly. LLVM implements an older version of the base
specification for all currently released versions, so these instructions
are available as part of the 'i' extension. If LLVM's implementation is
updated in the future, a CONFIG_AS_IS_LLVM condition can be added to
CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI.

To resolve the second issue, use version 2.2 of the base ISA spec when
using an older version of clang that does not support zicsr or zifencei
via '-march=', as that is the spec version most compatible with the one
clang/LLVM implements and avoids the need to specify zicsr and zifencei
explicitly due to still being a part of 'i'.

[1]: https://github.com/llvm/llvm-project/commit/22e199e6afb1263c943c0c0d4498694e15bf8a16
[2]: https://lore.kernel.org/ZAxT7T9Xy1Fo3d5W@aurel32.net/

Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1808
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230313-riscv-zicsr-zifencei-fiasco-v1-1-dd1b7840a551@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Merge tag 'nvme-6.3-2023-03-23' of git://git.infradead.org/nvme into block-6.3

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.3

- send Identify with CNS 06h only to I/O controllers (Martin George)
- fix nvme_tcp_term_pdu to match spec (Caleb Sander)"

* tag 'nvme-6.3-2023-03-23' of git://git.infradead.org/nvme:
nvme-tcp: fix nvme_tcp_term_pdu to match spec
nvme: send Identify with CNS 06h only to I/O controllers

Reinstate "GFS2: free disk inode which is deleted by remote node -V2"

It turns out that reverting commit 970343cd4904 ("GFS2: free disk inode
which is deleted by remote node -V2") causes a regression related to
evicting inodes that were unlinked on a different cluster node.

We could also have simply added a call to d_mark_dontcache() to function
gfs2_try_evict(), but the original pre-revert code is better tested and
proven.

This reverts commit 445cb1277e10d7e19b631ef8a64aa3f055df377d.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Merge tag 'zonefs-6.3-rc4' of git://git./linux/kernel/git/dlemoal/zonefs

Pull zonefs fixes from Damien Le Moal:

- Silence a false positive smatch warning about an uninitialized
   variable

- Fix an error message to provide more useful information about invalid
   zone append write results

* tag 'zonefs-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Fix error message in zonefs_file_dio_append()
  zonefs: Prevent uninitialized symbol 'size' warning

efi/libstub: randomalloc: Return EFI_OUT_OF_RESOURCES on failure

The logic in efi_random_alloc() will iterate over the memory map twice,
once to count the number of candidate slots, and another time to locate
the chosen slot after randomization.

If there is insufficient memory to do the allocation, the second loop
will run to completion without actually having located a slot, but we
currently return EFI_SUCCESS in this case, as we fail to initialize
status to the appropriate error value of EFI_OUT_OF_RESOURCES.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

drm/amd/display: Set dcn32 caps.seamless_odm

[Why & How]
seamless_odm set was not picked up while
merging commit 2d017189e2b3 ("drm/amd/display:
Blank eDP on enable drv if odm enabled")

Fixes: 2d017189e2b3 ("drm/amd/display: Blank eDP on enable drv if odm enabled")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk

[Why & How]
When merging commit 9af611f29034
("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming"),
index change was not picked up.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi

S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is
caused by commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default").

The root cause is still not clear for now.

So extend and apply the ASPM quirk from commit e02fe3bc7aba
("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to
workaround the issue on Navi cards too.

Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: remove outdated 8bpc comments

[Why]
The commit c76e483cd916 ("drm/amd/display: Don't restrict bpc to 8 bpc")
removes the historical 8bpc dependency and sets max_bpc to 16.

[How]
The comment that states "8bpc for non-edp" needs to be removed as well.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: set cg flags to enter/exit safe mode

sriov needs to enter/exit safe mode in update umd p state
add the cg flag to let it enter or exit while needed

Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Force signal hw_fences that are embedded in non-sched jobs

[Why]
For engines not supporting soft reset, i.e. VCN, there will be a failed
ib test before mode 1 reset during asic reset. The fences in this case
are never signaled and next time when we try to free the sa_bo, kernel
will hang.

[How]
During pre_asic_reset, driver will clear job fences and afterwards the
fences' refcount will be reduced to 1. For drm_sched_jobs it will be
released in job_free_cb, and for non-sched jobs like ib_test, it's meant
to be released in sa_bo_free but only when the fences are signaled. So
we have to force signal the non_sched bad job's fence during
pre_asic_reset or the clear is not complete.

Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mes resume when do gfx post soft reset

[why]
when gfx do soft reset, mes will also do reset, if mes is not
resumed when do recover from soft reset, mes is unable to respond
in later sequence

[how]
resume mes when do gfx post soft reset

Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip ASIC reset for APUs when go to S4

For GC IP v11.0.4/11, PSP TMR need to be reserved
for ASIC mode2 reset. But for S4, when psp suspend,
it will destroy the TMR that fails the ASIC reset.

[  96.006101] amdgpu 0000:62:00.0: amdgpu: MODE2 reset
[  100.409717] amdgpu 0000:62:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000011 SMN_C2PMSG_82:0x00000002
[  100.411593] amdgpu 0000:62:00.0: amdgpu: Mode2 reset failed!
[  100.412470] amdgpu 0000:62:00.0: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x50 [amdgpu] returns -62
[  100.414020] amdgpu 0000:62:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xd0 returns -62
[  100.415311] amdgpu 0000:62:00.0: PM: pci_pm_freeze+0x0/0xd0 returned -62 after 4623202 usecs
[  100.416608] amdgpu 0000:62:00.0: PM: failed to freeze async: error -62

We can skip the reset on APUs, assuming we can resume them
properly. Verified on some GFX11, GFX10 and old GFX9 APUs.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

drm/amdgpu: reposition the gpu reset checking for reuse

Move the amdgpu_acpi_should_gpu_reset out of
CONFIG_SUSPEND to share it with hibernate case.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

efi/libstub: Use relocated version of kernel's struct screen_info

In some cases, we expose the kernel's struct screen_info to the EFI stub
directly, so it gets populated before even entering the kernel. This
means the early console is available as soon as the early param parsing
happens, which is nice. It also means we need two different ways to pass
this information, as this trick only works if the EFI stub is baked into
the core kernel image, which is not always the case.

Huacai reports that the preparatory refactoring that was needed to
implement this alternative method for zboot resulted in a non-functional
efifb earlycon for other cases as well, due to the reordering of the
kernel image relocation with the population of the screen_info struct,
and the latter now takes place after copying the image to its new
location, which means we copy the old, uninitialized state.

So let's ensure that the same-image version of alloc_screen_info()
produces the correct screen_info pointer, by taking the displacement of
the loaded image into account.

Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/linux-efi/20230310021749.921041-1-chenhuacai@loongson.cn/
Fixes: 42c8ea3dca094ab8 ("efi: libstub: Factor out EFI stub entrypoint into separate file")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

net: mdio: thunder: Add missing fwnode_handle_put()

In device_for_each_child_node(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.

Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2023-03-21' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2023-03-21

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: E-Switch, Fix an Oops in error handling code
  net/mlx5: Read the TC mapping of all priorities on ETS query
  net/mlx5e: Overcome slow response for first macsec ASO WQE
  net/mlx5e: Initialize link speed to zero
  net/mlx5: Fix steering rules cleanup
  net/mlx5e: Block entering switchdev mode with ns inconsistency
  net/mlx5e: Set uplink rep as NETNS_LOCAL
====================

Link: https://lore.kernel.org/r/20230321211135.47711-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-03-21 (ice)

This series contains updates to ice driver only.

Piotr sets first_desc field for proper handling of Flow Director
packets.

Michal moves error checking for VF earlier in function to properly return
error before other checks/reporting; he also corrects VSI filter removal to
be done during VSI removal and not rebuild.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: remove filters only if VSI is deleted
  ice: check if VF exists before mode check
  ice: fix rx buffers handling for flow director packets
====================

Link: https://lore.kernel.org/r/20230321183641.2849726-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-03-21 (iavf, i40e)

This series contains updates to iavf and i40e drivers.

Stefan Assmann adds check, and return, if driver has already gone
through remove to prevent hang for iavf.

Radoslaw adds zero initialization to ensure Flow Director packets are
populated with correct values for i40e.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix flow director packet filter programming
iavf: fix hang on reboot with ice
====================

Link: https://lore.kernel.org/r/20230321183548.2849671-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case

Move setting the ssc_delta variable to under the PHY_INTERFACE_MODE_TRGMII
case as it's only needed when trgmii is used.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230320190520.124513-3-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()

Move lowering the TRGMII Tx clock driving to mt7530_setup(), after setting
the core clock, as seen on the U-Boot MediaTek ethernet driver.

Move the code which looks like it lowers the TRGMII Rx clock driving to
after the TRGMII Tx clock driving is lowered. This is run after lowering
the Tx clock driving on the U-Boot MediaTek ethernet driver as well.

This way, the switch should consume less power regardless of port 6 being
used.

Update the comment explaining mt7530_pad_clk_setup().

Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e42629325f/drivers/net/mtk_eth.c#L682
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230320190520.124513-2-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()

Split the code that enables and disables TRGMII clocks and core clock.
Move enabling and disabling core clock to mt7530_pll_setup() as it's
supposed to be run there.

Add 20 ms delay before enabling the core clock as seen on the U-Boot
MediaTek ethernet driver.

Change the comment for enabling and disabling TRGMII clocks as the code
seems to affect both TXC and RXC.

Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e42629325f/drivers/net/mtk_eth.c#L589
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230320190520.124513-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: asix: fix modprobe "sysfs: cannot create duplicate filename"

"modprobe asix ; rmmod asix ; modprobe asix" fails with:
sysfs: cannot create duplicate filename \
'/devices/virtual/mdio_bus/usb-003:004'

Issue was originally reported by Anton Lundin on 2022-06-22 (link below).

Chrome OS team hit the same issue in Feb, 2023 when trying to find
work arounds for other issues with AX88172 devices.

The use of devm_mdiobus_register() with usbnet devices results in the
MDIO data being associated with the USB device. When the asix driver
is unloaded, the USB device continues to exist and the corresponding
"mdiobus_unregister()" is NOT called until the USB device is unplugged
or unauthorized. So the next "modprobe asix" will fail because the MDIO
phy sysfs attributes still exist.

The 'easy' (from a design PoV) fix is to use the non-devm variants of
mdiobus_* functions and explicitly manage this use in the asix_bind
and asix_unbind function calls. I've not explored trying to fix usbnet
initialization so devm_* stuff will work.

Fixes: e532a096be0e5 ("net: usb: asix: ax88772: add phylib support")
Reported-by: Anton Lundin <glance@acc.umu.se>
Link: https://lore.kernel.org/netdev/20220623063649.GD23685@pengutronix.de/T/
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Link: https://lore.kernel.org/r/20230321170539.732147-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

gve: Cache link_speed value from device

The link speed is never changed for the uptime of a VM, and the current
implementation sends an admin queue command for each call. Admin queue
command invocations have nontrivial overhead (e.g., VM exits), which can
be disruptive to users if triggered frequently. Our telemetry data shows
that there are VMs that make frequent calls to this admin queue command.
Caching the result of the original admin queue command would eliminate
the need to send multiple admin queue commands on subsequent calls to
retrieve link speed.

Fixes: 7e074d5a76ca ("gve: Enable Link Speed Reporting in the driver.")
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230321172332.91678-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tools: ynl: Fix genlmsg header encoding formats

The pack strings use 'b' signed char for cmd and version but struct
genlmsghdr defines them as unsigned char. Use 'B' instead.

Fixes: 4e4480e89c47 ("tools: ynl: move the cli and netlink code around")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230319193803.97453-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: enetc: fix aggregate RMON counters not showing the ranges

When running "ethtool -S eno0 --groups rmon" without an explicit "--src
emac|pmac" argument, the kernel will not report
rx-rmon-etherStatsPkts64to64Octets, rx-rmon-etherStatsPkts65to127Octets,
etc. This is because on ETHTOOL_MAC_STATS_SRC_AGGREGATE, we do not
populate the "ranges" argument.

ocelot_port_get_rmon_stats() does things differently and things work
there. I had forgotten to make sure that the code is structured the same
way in both drivers, so do that now.

Fixes: cf52bd238b75 ("net: enetc: add support for MAC Merge statistics counters")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230321232831.1200905-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: Remove "Power-on" check from Mesh feature

The Bluetooth mesh experimental feature enable was requiring the
controller to be powered off in order for the Enable to work. Mesh is
supposed to be enablable regardless of the controller state, and created
an unintended requirement that the mesh daemon be started before the
classic bluetoothd daemon.

Fixes: af6bcc1921ff ("Bluetooth: Add experimental wrapper for MGMT based mesh")
Signed-off-by: Brian Gix <brian.gix@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: Fix race condition in hci_cmd_sync_clear

There is a potential race condition in hci_cmd_sync_work and
hci_cmd_sync_clear, and could lead to use-after-free. For instance,
hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync
The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and
causing kernel panic when it is used in 'hci_cmd_sync_work'.

Here's the call trace:

dump_stack_lvl+0x49/0x63
print_report.cold+0x5e/0x5d3
? hci_cmd_sync_work+0x282/0x320
kasan_report+0xaa/0x120
? hci_cmd_sync_work+0x282/0x320
__asan_report_load8_noabort+0x14/0x20
hci_cmd_sync_work+0x282/0x320
process_one_work+0x77b/0x11c0
? _raw_spin_lock_irq+0x8e/0xf0
worker_thread+0x544/0x1180
? poll_idle+0x1e0/0x1e0
kthread+0x285/0x320
? process_one_work+0x11c0/0x11c0
? kthread_complete_and_exit+0x30/0x30
ret_from_fork+0x22/0x30
</TASK>

Allocated by task 266:
kasan_save_stack+0x26/0x50
__kasan_kmalloc+0xae/0xe0
kmem_cache_alloc_trace+0x191/0x350
hci_cmd_sync_queue+0x97/0x2b0
hci_update_passive_scan+0x176/0x1d0
le_conn_complete_evt+0x1b5/0x1a00
hci_le_conn_complete_evt+0x234/0x340
hci_le_meta_evt+0x231/0x4e0
hci_event_packet+0x4c5/0xf00
hci_rx_work+0x37d/0x880
process_one_work+0x77b/0x11c0
worker_thread+0x544/0x1180
kthread+0x285/0x320
ret_from_fork+0x22/0x30

Freed by task 269:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_set_free_info+0x24/0x40
____kasan_slab_free+0x176/0x1c0
__kasan_slab_free+0x12/0x20
slab_free_freelist_hook+0x95/0x1a0
kfree+0xba/0x2f0
hci_cmd_sync_clear+0x14c/0x210
hci_unregister_dev+0xff/0x440
vhci_release+0x7b/0xf0
__fput+0x1f3/0x970
____fput+0xe/0x20
task_work_run+0xd4/0x160
do_exit+0x8b0/0x22a0
do_group_exit+0xba/0x2a0
get_signal+0x1e4a/0x25b0
arch_do_signal_or_restart+0x93/0x1f80
exit_to_user_mode_prepare+0xf5/0x1a0
syscall_exit_to_user_mode+0x26/0x50
ret_from_fork+0x15/0x30

Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution")
Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btintel: Iterate only bluetooth device ACPI entries

Current flow interates over entire ACPI table entries looking for
Bluetooth Per Platform Antenna Gain(PPAG) entry. This patch iterates
over ACPI entries relvant to Bluetooth device only.

Fixes: c585a92b2f9c ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: ISO: fix timestamped HCI ISO data packet parsing

Use correct HCI ISO data packet header struct when the packet has
timestamp. The timestamp, when present, goes before the other fields
(Core v5.3 4E 5.4.5), so the structs are not compatible.

Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: btusb: Remove detection of ISO packets over bulk

This removes the code introduced by
14202eff214e1e941fefa0366d4c3bc4b1a0d500 as hci_recv_frame is now able
to detect ACL packets that are in fact ISO packets.

Fixes: 14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet

Because some transports don't have a dedicated type for ISO packets
(see 14202eff214e1e941fefa0366d4c3bc4b1a0d500) they may use ACL type
when in fact they are ISO packets.

In the past this was left for the driver to detect such thing but it
creates a problem when using the likes of btproxy when used by a VM as
the host would not be aware of the connection the guest is doing it
won't be able to detect such behavior, so this make bt_recv_frame
detect when it happens as it is the common interface to all drivers
including guest VMs.

Fixes: 14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth: hci_sync: Resume adv with no RPA when active scan

The address resolution should be disabled during the active scan,
so all the advertisements can reach the host. The advertising
has to be paused before disabling the address resolution,
because the advertising will prevent any changes to the resolving
list and the address resolution status. Skipping this will cause
the hci error and the discovery failure.

According to the bluetooth specification:
"7.8.44 LE Set Address Resolution Enable command

This command shall not be used when:
- Advertising (other than periodic advertising) is enabled,
- Scanning is enabled, or
- an HCI_LE_Create_Connection, HCI_LE_Extended_Create_Connection, or
HCI_LE_Periodic_Advertising_Create_Sync command is outstanding."

If the host is using RPA, the controller needs to generate RPA for
the advertising, so the advertising must remain paused during the
active scan.

If the host is not using RPA, the advertising can be resumed after
disabling the address resolution.

Fixes: 9afc675edeeb ("Bluetooth: hci_sync: allow advertise when scan without RPA")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fix from Russell King:
"Just one fix for now to eliminate a KASAN false positive"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9290/1: uaccess: Fix KASAN false-positives

Merge tag 'bootconfig-fixes-v6.3-rc3' of git://git./linux/kernel/git/trace/linux-trace

Pull bootconfig fixes from Masami Hiramatsu:

- Fix bootconfig test script to test increased maximum number (8192)
   node correctly

- Change the console message if there is no bootconfig data and the
   kernel is compiled with CONFIG_BOOT_CONFIG_FORCE=y

* tag 'bootconfig-fixes-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  bootconfig: Change message if no bootconfig with CONFIG_BOOT_CONFIG_FORCE=y
  bootconfig: Fix testcase to increase max node

thermal: core: Restore behavior regarding invalid trip points

Commit 7c3d5c20dc16 ("thermal/core: Add a generic thermal_zone_get_trip()
function") stopped marking trip points with a zero temperature as
disabled, behavior that was originally introduced in commit 81ad4276b505
("Thermal: Ignore invalid trip points").

When using the mlxsw driver we see that when such trip points are not
disabled, the thermal subsystem repeatedly tries to set the state of the
associated cooling devices to the maximum state.

Address this by restoring the original behavior and mark trip points
with a zero temperature as disabled.

Fixes: 7c3d5c20dc16 ("thermal/core: Add a generic thermal_zone_get_trip() function")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

io_uring/rsrc: fix null-ptr-deref in io_file_bitmap_get()

When fixed files are unregistered, file_alloc_end and alloc_hint
are not cleared. This can later cause a NULL pointer dereference in
io_file_bitmap_get() if auto index selection is enabled via
IORING_FILE_INDEX_ALLOC:

[    6.519129] BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
[    6.541468] RIP: 0010:_find_next_zero_bit+0x1a/0x70
[...]
[    6.560906] Call Trace:
[    6.561322]  <TASK>
[    6.561672]  io_file_bitmap_get+0x38/0x60
[    6.562281]  io_fixed_fd_install+0x63/0xb0
[    6.562851]  ? __pfx_io_socket+0x10/0x10
[    6.563396]  io_socket+0x93/0xf0
[    6.563855]  ? __pfx_io_socket+0x10/0x10
[    6.564411]  io_issue_sqe+0x5b/0x3d0
[    6.564914]  io_submit_sqes+0x1de/0x650
[    6.565452]  __do_sys_io_uring_enter+0x4fc/0xb20
[    6.566083]  ? __do_sys_io_uring_register+0x11e/0xd80
[    6.566779]  do_syscall_64+0x3c/0x90
[    6.567247]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[...]

To fix the issue, set file alloc range and alloc_hint to zero after
file tables are freed.

Cc: stable@vger.kernel.org
Fixes: 4278a0deb1f6 ("io_uring: defer alloc_hint update to io_file_bitmap_set()")
Signed-off-by: Savino Dicanosa <sd7.dev@pm.me>
[axboe: add explicit bitmap == NULL check as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found

Returns EPROBE_DEFER when of_drm_find_bridge() fails, this is consistent
with what all the other DRM bridge drivers are doing and this is
required since the bridge might not be there when the driver is probed
and this should not be a fatal failure.

Cc: <stable@vger.kernel.org>
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Matheus Castello <matheus.castello@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230322143821.109744-1-francesco@dolcini.it

drm/meson: fix missing component unbind on bind errors

Make sure to unbind all subcomponents when binding the aggregate device
fails.

Fixes: a41e82e6c457 ("drm/meson: Add support for components")
Cc: stable@vger.kernel.org # 4.12
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306103533.4915-1-johan+linaro@kernel.org

xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support

When driver doesn't implement a bpf_xdp_metadata kfunc the fallback
implementation returns EOPNOTSUPP, which indicate device driver doesn't
implement this kfunc.

Currently many drivers also return EOPNOTSUPP when the hint isn't
available, which is ambiguous from an API point of view. Instead
change drivers to return ENODATA in these cases.

There can be natural cases why a driver doesn't provide any hardware
info for a specific hint, even on a frame to frame basis (e.g. PTP).
Lets keep these cases as separate return codes.

When describing the return values, adjust the function kernel-doc layout
to get proper rendering for the return values.

Fixes: ab46182d0dcb ("net/mlx4_en: Support RX XDP metadata")
Fixes: bc8d405b1ba9 ("net/mlx5e: Support RX XDP metadata")
Fixes: 306531f0249f ("veth: Support RX XDP metadata")
Fixes: 3d76a4d3d4e5 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/167940675120.2718408.8176058626864184420.stgit@firesoul
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

x86/PVH: avoid 32-bit build warning when obtaining VGA console info

In the commit referenced below I failed to pay attention to this code
also being buildable as 32-bit. Adjust the type of "ret" - there's no
real need for it to be wider than 32 bits.

Fixes: 934ef33ee75c ("x86/PVH: obtain VGA console info in Dom0")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/2d2193ff-670b-0a27-e12d-2c5c4c121c79@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>

hvc/xen: prevent concurrent accesses to the shared ring

The hvc machinery registers both a console and a tty device based on
the hv ops provided by the specific implementation. Those two
interfaces however have different locks, and there's no single locks
that's shared between the tty and the console implementations, hence
the driver needs to protect itself against concurrent accesses.
Otherwise concurrent calls using the split interfaces are likely to
corrupt the ring indexes, leaving the console unusable.

Introduce a lock to xencons_info to serialize accesses to the shared
ring. This is only required when using the shared memory console,
concurrent accesses to the hypercall based console implementation are
not an issue.

Note the conditional logic in domU_read_console() is slightly modified
so the notify_daemon() call can be done outside of the locked region:
it's an hypercall and there's no need for it to be done with the lock
held.

Fixes: b536b4b96230 ('xen: use the hvc console infrastructure for Xen console')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>

mlxsw: spectrum_fid: Fix incorrect local port type

Local port is a 10-bit number, but it was mistakenly stored in a u8,
resulting in firmware errors when using a netdev corresponding to a
local port higher than 255.

Fix by storing the local port in u16, as is done in the rest of the
code.

Fixes: bf73904f5fba ("mlxsw: Add support for 802.1Q FID family")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/eace1f9d96545ab8a2775db857cb7e291a9b166b.1679398549.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on

The bob supply is used by several pmic regulators and components which
are not (yet fully) described in the devicetree.

Mark the regulator as always-on for now.

Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-5-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on

The s12b supply is used by several pmic regulators as well as the
wlan/bluetooth radio which are not yet fully described in the
devicetree.

Mark the regulator as always-on for now.

Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-4-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on

The s10b supply is used by several components that are not (yet)
described in devicetree (e.g. ram, charger, ec) and must not be
disabled.

Mark the regulator as always-on.

Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-3-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on

The s11b supply is used by the wlan module (as well as some of the
pmics) which are not yet fully described in the devicetree.

Mark the regulator as always-on for now.

Fixes: 123b30a75623 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller")
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-2-johan+linaro@kernel.org

ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes

When a cpufreq policy appears or goes away, the CPU cooling devices for
the CPUs covered by that policy need to be updated so that the new
processor_get_max_state() value is stored as max_state and the
statistics in sysfs are rearranged for each of them.

Do that accordingly in acpi_thermal_cpufreq_init() and
acpi_thermal_cpufreq_exit().

Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
Reported-by: Wang, Quanxian <quanxian.wang@intel.com>
Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

thermal: core: Introduce thermal_cooling_device_update()

Introduce a core thermal API function, thermal_cooling_device_update(),
for updating the max_state value for a cooling device and rearranging
its statistics in sysfs after a possible change of its ->get_max_state()
callback return value.

That callback is now invoked only once, during cooling device
registration, to populate the max_state field in the cooling device
object, so if its return value changes, it needs to be invoked again
and the new return value needs to be stored as max_state. Moreover,
the statistics presented in sysfs need to be rearranged in general,
because there may not be enough room in them to store data for all
of the possible states (in the case when max_state grows).

The new function takes care of that (and some other minor things
related to it), but some extra locking and lockdep annotations are
added in several places too to protect against crashes in the cases
when the statistics are not present or when a stale max_state value
might be used by sysfs attributes.

Note that the actual user of the new function will be added separately.

Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

thermal: core: Introduce thermal_cooling_device_present()

Introduce a helper function, thermal_cooling_device_present(), for
checking if the given cooling device is in the list of registered
cooling devices to avoid some code duplication in a subsequent
patch.

No expected functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

ACPI: processor: Reorder acpi_processor_driver_init()

The cpufreq policy notifier in the ACPI processor driver may as
well be registered before the driver itself, which causes
acpi_processor_cpufreq_init to be true (unless the notifier
registration fails, which is unlikely at that point) when the
ACPI CPU thermal cooling devices are registered, so the
processor_get_max_state() result does not change while
acpi_processor_driver_init() is running.

Change the ordering in acpi_processor_driver_init() accordingly
to prevent the max_state value from remaining 0 permanently for all
ACPI CPU cooling devices due to setting acpi_processor_cpufreq_init
too late. [Note that processor_get_max_state() may still return
different values at different times after this change, depending on
the cpufreq driver registration time, but that issue needs to be
addressed separately.]

Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
Reported-by: Wang, Quanxian <quanxian.wang@intel.com>
Link: https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

bootconfig: Change message if no bootconfig with CONFIG_BOOT_CONFIG_FORCE=y

Change no bootconfig data error message if user do not specify 'bootconfig'
option but CONFIG_BOOT_CONFIG_FORCE=y.
With CONFIG_BOOT_CONFIG_FORCE=y, the kernel proceeds bootconfig check even
if user does not specify 'bootconfig' option. So the current error message
is confusing. Let's show just an information message to notice skipping
the bootconfig in that case.

Link: https://lore.kernel.org/all/167754610254.318944.16848412476667893329.stgit@devnote2/
Fixes: b743852ccc1d ("Allow forcing unconditional bootconfig processing")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/CAMuHMdV9jJvE2y8gY5V_CxidUikCf5515QMZHzTA3rRGEOj6=w@mail.gmail.com/
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>

wifi: mac80211: fix mesh path discovery based on unicast packets

If a packet has reached its intended destination, it was bumped to the code
that accepts it, without first checking if a mesh_path needs to be created
based on the discovered source.
Fix this by moving the destination address check further down.

Cc: stable@vger.kernel.org
Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230314095956.62085-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: mac80211: fix qos on mesh interfaces

When ieee80211_select_queue is called for mesh, the sta pointer is usually
NULL, since the nexthop is looked up much later in the tx path.
Explicitly check for unicast address in that case in order to make qos work
again.

Cc: stable@vger.kernel.org
Fixes: 50e2ab392919 ("wifi: mac80211: fix queue selection for mesh/OCB interfaces")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230314095956.62085-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: protect TXQ list manipulation

Some recent upstream debugging uncovered the fact that in
iwlwifi, the TXQ list manipulation is racy.

Introduce a new state bit for when the TXQ is completely
ready and can be used without locking, and if that's not
set yet acquire the lock to check everything correctly.

Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: iwlwifi: mvm: fix mvmtxq->stopped handling

This could race if the queue is redirected while full, then
the flushing internally would start it while it's not yet
usable again. Fix it by using two state bits instead of just
one.

Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mm/slab: Fix undefined init_cache_node_node() for NUMA and !SMP

sh/migor_defconfig:

    mm/slab.c: In function ‘slab_memory_callback’:
    mm/slab.c:1127:23: error: implicit declaration of function ‘init_cache_node_node’; did you mean ‘drain_cache_node_node’? [-Werror=implicit-function-declaration]
     1127 |                 ret = init_cache_node_node(nid);
  |                       ^~~~~~~~~~~~~~~~~~~~
  |                       drain_cache_node_node

The #ifdef condition protecting the definition of init_cache_node_node()
no longer matches the conditions protecting the (multiple) users.

Fix this by syncing the conditions.

Fixes: 76af6a054da40553 ("mm/migrate: add CPU hotplug to demotion #ifdef")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/b5bdea22-ed2f-3187-6efe-0c72330270a4@infradead.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>

nvme-tcp: fix nvme_tcp_term_pdu to match spec

The FEI field of C2HTermReq/H2CTermReq is 4 bytes but not 4-byte-aligned
in the NVMe/TCP specification (it is located at offset 10 in the PDU).
Split it into two 16-bit integers in struct nvme_tcp_term_pdu
so no padding is inserted. There should also be 10 reserved bytes after.
There are currently no users of this type.

Fixes: fc221d05447aa6db ("nvme-tcp: Add protocol header")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: send Identify with CNS 06h only to I/O controllers

Identify CNS 06h (I/O Command Set Specific Identify Controller data
structure) is supported only on i/o controllers.

But nvme_init_non_mdts_limits() currently invokes this on all
controllers. Correct this by ensuring this is sent to I/O
controllers only.

Signed-off-by: Martin George <marting@netapp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

net/sonic: use dma_mapping_error() for error check

The DMA address returned by dma_map_single() should be checked with
dma_mapping_error(). Fix it accordingly.

Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/6645a4b5c1e364312103f48b7b36783b94e197a2.1679370343.git.fthain@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fix-trainwreck-with-ocelot-switch-statistics-counters'

Vladimir Oltean says:

====================
Fix trainwreck with Ocelot switch statistics counters

While testing the patch set for preemptible traffic classes with some
controlled traffic and measuring counter deltas:
https://lore.kernel.org/netdev/20230220122343.1156614-1-vladimir.oltean@nxp.com/

I noticed that in the output of "ethtool -S swp0 --groups eth-mac
eth-phy eth-ctrl rmon -- --src emac | grep -v ': 0'", the TX counters
were off. Quickly I realized that their values were permutated by 1
compared to their names, and that for example
tx-rmon-etherStatsPkts64to64Octets was incrementing when
tx-rmon-etherStatsPkts65to127Octets should have.

Initially I suspected something having to do with the bulk reading
logic, and indeed I found a bug there (fixed as 1/3), but that was not
the source of the problems. Instead it revealed other problems.

While dumping the regions created by the driver on my switch, I figured
out that it sees a discontinuity which shouldn't have existed between
reg 0x278 and reg 0x280.

Discontinuity between last reg 0x0 and new reg 0x0, creating new region
Discontinuity between last reg 0x108 and new reg 0x200, creating new region
Discontinuity between last reg 0x278 and new reg 0x280, creating new region
Discontinuity between last reg 0x2b0 and new reg 0x400, creating new region
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 31 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 13 contiguous counters starting with SYS:STAT:CNT[0x0a0]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]

That is where TX_MM_HOLD should have been, and that was the bug, since
it was missing. After adding it, the regions look like this and the
off-by-one issue is resolved:

Discontinuity between last reg 0x000000 and new reg 0x000000, creating new region
Discontinuity between last reg 0x000108 and new reg 0x000200, creating new region
Discontinuity between last reg 0x0002b0 and new reg 0x000400, creating new region
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]

However, as I am thinking out loud, it should have not reported the
other counters as off by one even when skipping TX_MM_HOLD... after all,
on Ocelot/Seville, there are more counters which need to be skipped.

Which is when I investigated and noticed the bug solved in 2/3.
I've validated that both on native VSC9959 (which uses
ocelot_mm_stats_layout) as well as by faking the other switches by
making VSC9959 use the plain ocelot_stats_layout.

To summarize: on all Ocelot switches, the TX counters and drop counters
are completely broken. The RX counters are mostly fine.

With this occasion, I have collected more cleanup patches in this area,
which I'm going to submit after the net -> net-next merge.
====================

Link: https://lore.kernel.org/r/20230321010325.897817-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: add TX_MM_HOLD to ocelot_mm_stats_layout

The lack of a definition for this counter is what initially prompted me
to investigate a problem which really manifested itself as the previous
change, "net: mscc: ocelot: fix transfer from region->buf to ocelot->stats".

When TX_MM_HOLD is defined in enum ocelot_stat but not in struct
ocelot_stat_layout ocelot_mm_stats_layout, this creates a hole, which
due to the aforementioned bug, makes all counters following TX_MM_HOLD
be recorded off by one compared to their correct position. So for
example, a non-zero TX_PMAC_OCTETS would be reported as TX_MERGE_FRAGMENTS,
TX_PMAC_UNICAST would be reported as TX_PMAC_OCTETS, TX_PMAC_64 would be
reported as TX_PMAC_PAUSE, etc etc. This is because the size of the hole
(1) is much smaller than the size of the region, so the phenomenon where
the stats are off-by-one, rather than lost, prevails.

However, the phenomenon where stats are lost can be seen too, for
example with DROP_LOCAL, which is at the beginning of its own region
(offset 0x000400 vs the previous 0x0002b0 constitutes a discontinuity).
This is also reported as off by one and saved to TX_PMAC_1527_MAX, but
that counter is not reported to the unstructured "ethtool -S", as
opposed to DROP_LOCAL which is (as "drop_local").

Fixes: ab3f97a9610a ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>