Thiago Macieira [Tue, 24 Apr 2012 14:27:35 +0000 (16:27 +0200)]
Replace the x86 XGETBV instruction with its opcode bytes
This is a new instruction, present on the SandyBridge architecture and
later. Some older assemblers do not support it and produce:
{standard input}:225:no such instruction: `xgetbv'
The use of this instruction is protected by a CPUID check (function 1,
ECX bit 27), so we only run it in processors that do support it.
Change-Id: Ife7500c0deaab9539074835a4511e8c19602608e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Thiago Macieira [Sun, 25 Dec 2011 22:36:14 +0000 (20:36 -0200)]
Update the x86 feature-detection code, unifying x86 and x86-64
Most of it is the same for both of them, so let's avoid doing
everything twice. Or more, since we may support x32 soon. For Windows,
use the intrinsics. For GCC, we'd like to use cpuid.h, but it only
exists since GCC 4.3, so we can't.
And properly detect AVX support: it's not enough to detect that the
processor supports them, we also need to check that the OS enabled
support for the 256-bit registers.
Change-Id: Ibb4872cdb774de5701b18c40f4e612330a266214
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Thiago Macieira [Tue, 24 Apr 2012 16:06:44 +0000 (18:06 +0200)]
Fix atomics on SPARC
Inspired by
https://bugreports.qt-project.org/secure/attachment/26020/qt_atomic_sparc64.patch
Task-number: QTBUG-22479
Change-Id: Ie3275df96c639d6a75e05f70fe5745aeb34457f9
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Bradley T. Hughes [Wed, 21 Mar 2012 13:01:18 +0000 (14:01 +0100)]
Cocoa: support modal windows
Qt::WindowModal windows and dialogs are shown using [NSApp
beginSheet:modalForWindow:modalDelegate:didEndSelector:contextInfo:] as
long as they have a valid parent. Otherwise they are behave as
application modal.
Use the existing modal session support in the QCocoaEventDispatcher
(which was inherited from Qt 4) to support Qt::ApplicationModal
windows and dialogs. Some changes to this code are needed to ensure
proper behavior:
1. Window level modification is now done in
QCocoaWindow::recreateWindow() instead of in QCocoaEventDispatcher.
2. Make interrupt() use [NSApp abortModal] to stop a modal session
(previously we were freeing memory from under Cocoa's feet, causing
tools like valgrind and Instruments.app to complain)
3. Do not remove an item from a list and use a const reference to the
removed item immediately after (minor bug fix).
Also make sure that QCocoaEventDispatcher cleans up any modal sessions
and retained user input events on destruction (otherwise we leave
NSApplication in a weird state, which causes some autotest failures).
Change-Id: Iaeefa025400f324b5348b8c81a40384ef026efb4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Bradley T. Hughes [Wed, 25 Apr 2012 09:55:43 +0000 (11:55 +0200)]
Skip tst_QInputDialog on Mac OS X
This test hangs in CI, but so far I've been unable to reproduce the
problem. Disable the test for now so that this test does not block
changes that bring in needed functionality.
Task-number: QTBUG-25496
Change-Id: I81faa574b6d7bcab2e32becc2af0f71006c7dd9c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Thiago Macieira [Wed, 25 Apr 2012 10:48:02 +0000 (12:48 +0200)]
Revert QUrl::isRelative to its Qt 4 behaviour
Instead of trying to return whether the URL is relative to something
undefined, let's instead follow what the documentation was saying all
along and what the RFC says about "Relative References".
Change-Id: I32722321a6b36c6e3480669ad769390e4c6f7d1c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Thiago Macieira [Wed, 19 Oct 2011 21:51:17 +0000 (23:51 +0200)]
Warn if we use deprecated methods from Qt modules
This change will cause any use of methods and classes declared with
Q_DECL_DEPRECATED to produce a warning in the compilation
output. Those warnings need to be silenced before the Qt 5.0 release,
preferably before the beta.
Change-Id: I28ce133867cc5918e177c57f6e5f7ab9421989ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Thiago Macieira [Tue, 24 Apr 2012 17:15:49 +0000 (19:15 +0200)]
Make configure.exe not overwrite its own Makefile in -fast mode
configure.exe's Makefile is created by configure.bat. While severely
lacking, it is what gets executed when the user configures, so
developers modifying configure.exe should use that too.
Change-Id: Ib216889594d08c980bfae6d2dbbb27ee9901375a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Thiago Macieira [Tue, 24 Apr 2012 17:14:10 +0000 (19:14 +0200)]
Make configure.exe create files with Windows line-endings
Except for the perl sources, just in case.
This helps if you need to open the output files in, say, notepad.exe.
Change-Id: Ibf46b74af2efd6936586650e1405750bfef17952
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Jan-Arve Saether [Wed, 25 Apr 2012 08:17:08 +0000 (10:17 +0200)]
MSAA bridge should not return any IA2-specific roles from get_accRole()
Small cleanup/improvement. This patch just does what the removed ###
says.
Change-Id: I0d16541d2e4b8f948f32734ef0138fde5517932a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Jan-Arve Saether [Wed, 25 Apr 2012 07:13:07 +0000 (09:13 +0200)]
Do not map LayeredPane and Terminal to the wrong MSAA role
Microsoft did at some point extend the roles in MSAA with two extra
roles (ROLE_SYSTEM_IPADDRESS and ROLE_SYSTEM_OUTLINEBUTTON).
These are defined in oleacc.h as:
#define ROLE_SYSTEM_IPADDRESS ( 0x3f )
#define ROLE_SYSTEM_OUTLINEBUTTON ( 0x40 )
This means that LayeredPane will map to ROLE_SYSTEM_IPADDRESS
and Terminal will map to ROLE_SYSTEM_OUTLINEBUTTON, which is
obviously wrong.
We now reserve some valuespace for more roles to reduce the likelyness of
any collisions in the future. Having the reserved area also serves
as a way of indicating the boundary between the "MSAA" enums and other
enums.
Change-Id: Ic67a1a7200382fed3040e69b3e8856376ba642ac
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Konstantin Ritt [Tue, 24 Apr 2012 15:38:57 +0000 (18:38 +0300)]
get rid of QT_NO_IMAGE_TEXT switcher
Change-Id: Ie72f907ffb959f629af6a414959348a992c4c941
Reviewed-by: aavit <qt_aavit@ovi.com>
Casper van Donderen [Mon, 23 Apr 2012 14:47:43 +0000 (16:47 +0200)]
QDoc: Implement -installdir CLI option for module cross-linking.
QDoc needs to know the final location of the installed documentation to
generate correct relative links between the modules. Normally you can
use QLibraryInfo::DocumentationPath for this, but since QDoc gets compiled
during Qt bootstrapping QLibraryInfo is not available yet.
The -installdir option still allows us to specify
QLibraryInfo::DocumentationPath on the command line.
Change-Id: Ic4729f4daad112f0d175931467cf09cfcf5145a3
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Jason McDonald [Mon, 23 Apr 2012 09:32:43 +0000 (19:32 +1000)]
Mark known test failures in Windows developer build.
Previously, the CI system has not been testing on Windows with the
-developer-build configure flag. Mark known failures for this
configuration so that tests can be run in enforcing mode.
Change-Id: I5fbbbe09a7b400d626107c66dcbd5c5469a45b20
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Jędrzej Nowacki [Tue, 24 Apr 2012 08:07:55 +0000 (10:07 +0200)]
Use macro for QByteArrayData initialization.
Change-Id: Ib3f906dc5f313c7f9669efda26a93a76af7d7f80
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Konstantin Ritt [Wed, 11 Apr 2012 08:06:21 +0000 (11:06 +0300)]
support UTF-8 encoded file names in QZip*
Change-Id: Iba0457b55ef9fa3673f78b4d30d018a146e8fb1c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Laszlo Agocs [Tue, 24 Apr 2012 13:31:18 +0000 (16:31 +0300)]
Update QTest::QTouchEventSequence docs
Change-Id: I2a8f88929f985b1543ec7c223266e8387f0a8a48
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Peter Hartmann [Sun, 22 Apr 2012 19:20:27 +0000 (21:20 +0200)]
QHttpMultiPart: supply new line at the end of the body
... to conform to RFC 2046 (section 5.1.1). Apparently IIS had problems
without the new line.
Task-number: QTBUG-25429
Change-Id: Ia619bbdcebd407b2716bc467323634e4c8d77bcd
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Konstantin Ritt [Mon, 23 Apr 2012 04:00:28 +0000 (07:00 +0300)]
optimize QChar::decomposition()
* by not using QString::fromUtf16() as we know for sure that
the data is 'raw' UCS-2;
* it's safe to avoid a check for > UNICODE_LAST_CODEPOINT
as GET_DECOMPOSITION_INDEX macro already does a similar check
Change-Id: Ifb660efc51c664d06733ac8ed46d54278520da06
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Debao Zhang [Mon, 16 Apr 2012 20:16:11 +0000 (13:16 -0700)]
Using QLatin1String instead of QLatin1Literal
QLatin1Literal is just a typedef of QLatin1String.
Change-Id: If20ca225e57a7fb45a7775f0fc81aedb6da88c96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Stephen Röttger [Tue, 24 Apr 2012 03:29:07 +0000 (05:29 +0200)]
Fix locale issue on unix systems
QSystemLocale::query() was missing the LanguageId QueryType. Therefore
QSystemLocale::fallbackLocale() was always used as default language,
which reads environment variables in the order: LC_ALL -> LC_NUMERIC ->
LANG. The correct behaviour is to read LC_ALL -> LC_MESSAGES -> LANG.
This leads to problems for users that want to use english language, but
non-english localization features (date, number formats etc.)
Change-Id: I4310537dac8622a3dd79231fbad58e22f20ca262
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: John Layt <jlayt@kde.org>
Konstantin Ritt [Mon, 23 Apr 2012 03:00:16 +0000 (06:00 +0300)]
qunicodetables generator: improve the output and the generated code
better memory usage report;
an additional asserts with conditions the implementation is depends on;
a namespace for the internal static data;
styling fixes
Change-Id: Id4048ff6104c56b5f590f9ac6fbf7c0bce79ec47
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Konstantin Ritt [Mon, 23 Apr 2012 15:11:57 +0000 (18:11 +0300)]
workaround issue where casing diff overflows signed short
there are two such codepoints were added in the Unicode 5.1:
U+1D79 LATIN SMALL LETTER INSULAR G
U+A77D LATIN CAPITAL LETTER INSULAR G
two more of them were added in the Unicode 6.0:
U+0265 LATIN SMALL LETTER TURNED H
U+A78D LATIN CAPITAL LETTER TURNED H
and two more were added in the Unicode 6.1:
U+0266 LATIN SMALL LETTER H WITH HOOK
U+A7AA LATIN CAPITAL LETTER H WITH HOOK
we map them like special cases with length == 1
(note: all are in BMP which is checked explicitly in the generator)
Change-Id: I8a34164eb3ee2e575b7799cc12d4b96ad5bcd9c6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Konstantin Ritt [Mon, 9 Apr 2012 14:56:44 +0000 (17:56 +0300)]
QChar: reduce code duplication by inlining some methods
using templates for toLower()/toUpper()/toTitleCase()/toCaseFolded()
makes the upcoming patches smaller and thus easier to review
Change-Id: Ideb23e8669dbc2fe9ea3f129bf0137e1805ece11
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Jan-Arve Saether [Tue, 24 Apr 2012 11:20:07 +0000 (13:20 +0200)]
Make NVDA read aloud stuff from a Qt app again.
Previously, NVDA did not read aloud anything from a Qt app.
Change-Id: Ie738e7e7d7acc54f45fab9195adc09bfde930174
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Jan-Arve Saether [Tue, 24 Apr 2012 07:52:52 +0000 (09:52 +0200)]
Fix a regression where events were not delivered on windows
Regression caused by
a17907829e6b180f2bb4af9a8594996b2a0e531a
Change-Id: I8a2ca35cf176b4db47f29d848cbc2cd8180596d0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Jan-Arve Saether [Tue, 24 Apr 2012 07:45:43 +0000 (09:45 +0200)]
Add QDebug operator<< for QAccessibleEvent
(Keep it internal)
Change-Id: I9e99ccbd16cc595d2aff97a26181e8d8c3d9d7ae
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Yan Shapochnik [Fri, 20 Apr 2012 12:41:18 +0000 (08:41 -0400)]
Provide access to RTLD_NODELETE flag on Unix.
Introduce a new QLibrary::PreventUnloadHint to support the
RTLD_NODELETE flag support by dlcompat on Unix platforms.
Change-Id: Ib1327e968a2a888850ad1086a102a143f86c5090
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Jeff Kehres [Fri, 23 Mar 2012 14:43:44 +0000 (10:43 -0400)]
Integrate Blackberry Platform Services (BPS) with Qt event loop.
This ensures interoperability between the Blackbery C and C++ APIs
and makes it easier to expose platform services in C++ that are
exposed in BPS - since events from both APIs can be processed on
the same thread.
Change-Id: I7270adc64c26396f66d9126141500d5e58be51e7
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Thiago Macieira [Mon, 23 Apr 2012 15:06:08 +0000 (17:06 +0200)]
Ensure that QUrl::toLocalFile returns decoded paths
QUrl::path() already decodes almost everything, but let's pass the
formatting flag to be sure.
Note: decoding of control characters from U+0001 to U+001F is not
implemented. Non-UTF8 sequences are also not representable.
Change-Id: I9a0ae2282ec3d48cc0e70e5b2d3824fb120709ed
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Thiago Macieira [Fri, 20 Apr 2012 12:59:30 +0000 (14:59 +0200)]
Don't use the QRegExp methods that modify the object [QtGui]
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.
QRegularExpression has no such shortcoming.
Task-number: QTBUG-25064
Change-Id: If119e06221ca99e57c5ad1a1d4cc6468e9f68c7b
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Thiago Macieira [Mon, 23 Apr 2012 15:02:17 +0000 (17:02 +0200)]
Don't strip the leading slash of letter+colon paths on Unix
It's perfectly valid to have a path of /c:/a.txt on Unix, so don't
strip the leading slash unless we're on Windows.
Task-number: QTBUG-20322
Change-Id: I721bd0a65b41048bc735d4eaa0d536174164fe64
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Jason McDonald [Tue, 24 Apr 2012 11:10:54 +0000 (21:10 +1000)]
Remove insignification from qabstractitemmodel test on Mac OS X.
Since this test began to run again on Mac, it has been passing
consistently.
Task-number: QTBUG-22748
Change-Id: Ia81cf60b11d45fb331b5eca5d13df00556c18e07
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Jason McDonald [Tue, 24 Apr 2012 11:20:04 +0000 (21:20 +1000)]
lancelot test: Skip crashing test function on Mac OS X.
Task-number: QTBUG-22792
Change-Id: Iee70dafe9b4aced1a7c6cea63da88a92dff7d43d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Laszlo Agocs [Tue, 24 Apr 2012 07:57:57 +0000 (10:57 +0300)]
Add flag in testlib to disable committing the simulated touch
Some declarative tests (e.g. 24319) need more fine-grained control
over processing the simulated touch events.
Change-Id: Ib163cfd29254016ea16e8d739ad97369b6ccdc90
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Laszlo Agocs [Mon, 23 Apr 2012 13:18:01 +0000 (16:18 +0300)]
Add a QWindow autotest case for reentrant mouse/touch events
Declarative used to have some issues when the MouseArea event handlers
spinned the event loop: subsequent mouse events were all lost. Let's
add an autotest also for QGuiApplication to make sure the same problem
won't occur there.
Change-Id: If5c3b4f58dad609efb302d2ca932493680ffdf13
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Stephen Kelly [Mon, 23 Apr 2012 17:24:13 +0000 (19:24 +0200)]
Run DBus tests only if QtDBus is found.
It's not enough to check for UNIX because Qt may have been configured
without dbus, or we could be running on APPLE (on which DBus is not
commonly installed).
Change-Id: Ic57200dad42c0c12b292d1066f799c827294fe9a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Thiago Macieira [Tue, 24 Apr 2012 11:33:16 +0000 (13:33 +0200)]
Update the QUrl documentation concerning the encoding
Looks like I failed to update this earlier, when the behaviour changed.
Change-Id: Ic020c2a14d4e9153f2bc9d22d943a3a380c0851c
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Thiago Macieira [Fri, 20 Apr 2012 12:59:30 +0000 (14:59 +0200)]
Don't use the QRegExp methods that modify the object [QtTest]
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.
QRegularExpression has no such shortcoming.
Task-number: QTBUG-25064
Change-Id: I7c5f5ebf4521c32337c9ea9aeeef50e1e8690bf8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Thiago Macieira [Thu, 29 Dec 2011 18:36:46 +0000 (16:36 -0200)]
Use the C99 keyword "restrict" in compilers that support it
This allows the compiler to produce better / smaller code due to not
being required to deal with two pointers possibly aliasing each
other. This also enables vectorisation where otherwise the compiler
wouldn't be able to do.
Change-Id: Ie7db3a54a1ba22f87ac5283d5c43905707957549
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Thiago Macieira [Thu, 29 Dec 2011 17:12:59 +0000 (15:12 -0200)]
Mark some functions as always_inline with GCC and ICC.
These functions are too critical to be called. They should always be
inlined.
Change-Id: I698dc6d83e02c323759c6d066f17993340bd53a5
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
John Layt [Mon, 26 Mar 2012 16:23:21 +0000 (17:23 +0100)]
QLocale: Clean up QLocalePrivate implementation
In Qt4 QLocalePrivate is a struct returned by a d() method. This will be
unsuitable for the planned change to use ICU and may cause BIC issues.
This change makes QLocalePrivate a class and creates a new struct
QLocaleData to hold the data index. Further clean-ups are possible
but are left for later.
Change-Id: Ie316a07790f74674a3b520b735dff72695cc4060
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Jędrzej Nowacki [Tue, 24 Apr 2012 10:44:34 +0000 (12:44 +0200)]
Cleanup QMetaObject string access.
We do not need operate on raw QByteArrayData, QByteArray gives us
better, stable API, without any performance penalty.
Change-Id: Idf47af2333c3694e81dcd31cd07d1a4720046df7
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Stephen Kelly [Mon, 23 Apr 2012 19:55:14 +0000 (21:55 +0200)]
Fix creation of config files in debug mode.
f88212c22f7e4bec261130a6f82294adfc75abca was not complete.
Change-Id: Ie5b1bb4832176ec8a72ace473f7dbc6c4de10ff2
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Jason McDonald [Fri, 20 Apr 2012 15:06:48 +0000 (01:06 +1000)]
Re-enable network tests on Mac OS.
Switch on most of the tests (all but the bearer tests), marking the two
known failures as insignificant tests.
Change-Id: I17f228a938de1a23eddf897f494bfa4e54338dae
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Shane Kearns [Mon, 23 Apr 2012 14:29:41 +0000 (15:29 +0100)]
Fix tst_qtcpserver::serverAddress on Mac OSX
While linux returns the local address of dual mode sockets as "::"
i.e. the IPv6 address, OSX returns "::FFFF:0.0.0.0" i.e. the IPv4 address.
In the unix socket engine, treat both of these as candidates for
being a dual mode socket. This should hopefully cover other unixes
which we haven't tested.
Task-Number: QTBUG-25445
Change-Id: If1251018d54da98618223ba538c00ba54ac4cb4e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Martin Smith [Tue, 24 Apr 2012 11:10:40 +0000 (13:10 +0200)]
qdoc: Further changes to the QML specialization
1. Body elements to include type, property, method, signal, enum info, so:
qmlDetail to
- qmlTypeDetail
- qmlPropertyDetail
- qmlEnumerationDetail
- qmlMethodDetail
- qmlSignalDetail
2. Same thing for a section that contains elements specialized for QML, so
qmlDef to
- qmlTypeDef
- qmlPropertyDef
- qmlEnumerationDef
- qmlMethodDef
- qmlSignalDef
Rationale for both items above is that otherwise the body and section
content models would have to be exactly the same for a type, property,
method, etc.
3. For the import statement use:
<qmlImportModule>
<apiItemName>QtGraphicalEffects</apiItemName>
<apiData>1.0</apiData>
</qmlImportModule>
So we have an element indicating that this is for the import
statement, not an outputclass. And no need to specialize the elements
inside it as we know from the ancestor (qmlImportModule) what they're
for.
<qmlImportModule> to be specialized from apiDef.
4. The 'description' section name doesn't need to be specialized further from the API ref. DTDs so
<qmlDesc> should be <apiDesc>
The content model for the 'description' section would be similar to that of a normal DITA section, specialized into apiDesc in the API ref. DTDs, so we don't need to rename it for QML.
5. We need a separate element for the since information.
<qmlSince>
<apiItemName>QtGraphicalEffects</apiItemName>
<apiData>1.0</apiData>
</qmlSince>
6. Public identifier should be like this for a type:
-//NOKIA//DTD DITA QML Type//EN
Not like this:
-//NOKIA//DTD DITA QML API Type Reference v0.1.0//EN
Change-Id: Ie9047965bf32a2e3e9339eb743f2019cb38c88e4
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Jason McDonald [Thu, 19 Apr 2012 16:03:55 +0000 (02:03 +1000)]
Remove insignification of QMdiArea test on Windows.
This test had two stable failures, caused by including code not meant
for Windows.
Task-number: QTBUG-25298
Change-Id: I43d9d62ecf5a3c6eec240fafbc43a625c00f45fa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Jason McDonald [Wed, 18 Apr 2012 17:37:37 +0000 (03:37 +1000)]
Re-enable the QMacStyle test.
This test has only stable failures. Mark those failures with
QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-25296
Change-Id: I5615700ec8119a827c30e43ae651a684e78170fe
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Markus Rathgeb [Mon, 16 Apr 2012 20:31:51 +0000 (22:31 +0200)]
Fix QMutex::tryLock timeout regression (integer overflow)
The timeout given in milliseconds should be converted to a timespec
struct.
To separate the seconds and nanoseconds the milliseconds are first
multiplied to represent the whole value in an int64 variable.
The calculation is done on integers, so we get an overflow if the
milliseconds are bigger then 2148.
If we cast the given value to an int64 we can avoid this problem.
Fix the used cast.
Task-number: QTBUG-24795
Change-Id: I864ae227cf7dda16a6f30aa4db74acc49e20f6eb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Niels Weber [Fri, 20 Apr 2012 12:31:34 +0000 (14:31 +0200)]
Improved detection of libcrypto and libssl.
The previous solution didn't work on systems where the libraries
aren't in the same location.
Now we search for both libcrypto and libssl and load them if their
versions match, even if they are in different directories.
Task-number: QTBUG-25398
Change-Id: I37164638890586947d07670d8a59fc53a84f9c42
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Donald Carr [Mon, 23 Apr 2012 21:15:14 +0000 (21:15 +0000)]
Add N9 device mkspec to device mkspecs folder
Change-Id: Ie8b0e8a014316b218c86cfdc0c58cad1ae4d3015
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Friedemann Kleint [Tue, 24 Apr 2012 08:34:46 +0000 (10:34 +0200)]
Windows: Fix for frameless widgets.
Let Qt::FramelessWindowHint take precedence over
Qt::WindowTitleHint (which enforces WS_CAPTION and thus
WS_DLGFRAME).
Change-Id: I2c0248d8a3ee3ed0f04b926acdef3cbeb98ca571
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Friedemann Kleint [Tue, 24 Apr 2012 08:21:10 +0000 (10:21 +0200)]
Fix windowgeometry test for Windows.
- Specify main.cpp with full path to avoid obscure link
errors (grabbing main.cpp from windowflags)
- Set proper flags on the test window.
Change-Id: I9bbaf9cb5c7e210f53a51b58bd48a827d6104fe2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Jason McDonald [Thu, 19 Apr 2012 16:41:39 +0000 (02:41 +1000)]
Remove insignification from QDateTimeEdit test on Mac OS X.
This test only has stable failures. Mark those with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-23674
Change-Id: I0e6cfe4f1992410bbc27b266f7bdafa14451aff7
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Jason McDonald [Thu, 19 Apr 2012 16:25:18 +0000 (02:25 +1000)]
Remove insignification of QSizeGrip test on Mac OS X.
The test has one stable failure. Mark it with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-23681
Change-Id: Iade17cbbd1570863bb628572d8da52ec9c0f62ba
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Jason McDonald [Tue, 24 Apr 2012 07:54:20 +0000 (17:54 +1000)]
Skip unstable tst_QMdiArea::subWindowActivated2 test on Mac OS X.
This test function recently became unstable in parallel with the change
to re-enable the test. Skip the unstable function until it can be
fixed.
Change-Id: I0fb962aa3294a0c9b799acee52ab1fb1cd1c6924
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Thiago Macieira [Mon, 23 Apr 2012 14:24:22 +0000 (16:24 +0200)]
Remove Qt 5 todo in QVariant: we're not going to change the behaviour
Task-number: QTBUG-25111
Change-Id: I2387767698c402e2bd0ecdfdd6ed41d4a224f1b6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Miikka Heikkinen [Tue, 24 Apr 2012 06:39:11 +0000 (09:39 +0300)]
Change Windows font database to use qendian.h
Removed the custom BigEndian class and utilized qendian.h functions
instead.
Change-Id: Ieb10f77411404e1524fcedaceffa5b0e333c7429
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Thiago Macieira [Fri, 20 Apr 2012 12:28:07 +0000 (14:28 +0200)]
Rename the default organisation from "Trolltech" to "Qt" on Mac
This doesn't seem to be documented -- or if it was, the documentation
has been changed.
Task-number: QTBUG-23269
Change-Id: Ie7aa51aeb251bfaa3d0018fbac4adc9517c97fa0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Martin Smith [Mon, 23 Apr 2012 11:45:28 +0000 (13:45 +0200)]
qdoc: Don't write '...' for empty <apiName>
qdoc now <apiName/>, when there is no name.
Change-Id: I0aa85eef633776f691c9e2238514194cf89b8a8f
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Martin Smith [Mon, 23 Apr 2012 10:41:16 +0000 (12:41 +0200)]
qdoc: Update qdoc to use QML spec for DITA
qdoc now generates DITA XML from QML docs according
to the QML specialization.
Change-Id: I51d93c2ab3b1deefab9bbedcd2e752f49648809f
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Simon Hausmann [Mon, 23 Apr 2012 06:46:05 +0000 (08:46 +0200)]
Removed unused QUrlPrivate::clear()
The function is not used anymore.
Change-Id: Idfdc0505358421a866b15e2ad322679a1808e223
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Thiago Macieira [Thu, 19 Apr 2012 22:07:31 +0000 (00:07 +0200)]
Use the Q_PROCESSOR_* macros in qsimd.cpp
Change-Id: I7be9b14a24329be32c43603ae87df17328696109
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Jason McDonald [Thu, 19 Apr 2012 15:12:22 +0000 (01:12 +1000)]
Remove insignification of QMdiArea test on Mac OS X.
This test has only stable failures on Mac. Mark those failures with
QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-25298
Change-Id: I1c768226dfeb9307386e8853091baa68936bed29
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Sean Harmer [Mon, 23 Apr 2012 09:55:18 +0000 (10:55 +0100)]
Set thread name on QNX
Change-Id: I4fc786afce2e53676b148332dddd2c84228f7d87
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Giuseppe D'Angelo [Sun, 22 Apr 2012 21:11:07 +0000 (22:11 +0100)]
QTimer: fix typo in singleShot optimization for 0 msecs
The SIGNAL/SLOT/METHOD(x) macros prepend a character between
'0' and '2' inclusive, and not '0' and '3'.
Change-Id: Ibdbf442422925a43f956b2ba70f1f9c6a2812305
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Friedemann Kleint [Fri, 20 Apr 2012 14:50:44 +0000 (16:50 +0200)]
Revert "Add workaround for projects using 'QT += declarative'"
The workaround should no longer be necessary.
It causes compile errors for MinGW since the command lines
are too long.
This reverts commit
6225e3ba01ef918724a15dd1311ab5d8205be534.
Change-Id: I0288f4621f072b91dc94f25092ef124fa4c1b09e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Matthew Vogt <matthew.vogt@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Thiago Macieira [Fri, 20 Apr 2012 12:59:30 +0000 (14:59 +0200)]
Don't use the QRegExp methods that modify the object [qmake]
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.
QRegularExpression has no such shortcoming.
Task-number: QTBUG-25064
Change-Id: I6b2d2530238a7e04b44859664a2962f2f466ee30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Thiago Macieira [Mon, 9 Apr 2012 14:07:42 +0000 (11:07 -0300)]
Add missing private headers to testlib.pro
Change-Id: Id927b05374b9e82fbee029258f176223b8b32e90
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Thiago Macieira [Wed, 28 Mar 2012 19:40:28 +0000 (16:40 -0300)]
Move Q_FUNC_INFO to qcompilerdetection.h
Change-Id: Ibc63913f070febe561890e98ef079ca883d9bfc9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Thiago Macieira [Wed, 28 Mar 2012 19:27:09 +0000 (16:27 -0300)]
Move the QT_STRINGIFY macro to the top of qglobal.h
This will allow me to use them in qcompilerdetection.h.
Also, leave them defined.
Change-Id: I73cb39e3cfcc2463d1d47a856e4a64354ebe743c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Mark Brand [Sun, 22 Apr 2012 23:06:17 +0000 (01:06 +0200)]
QSqlQueryModel::setQuery() don't use deprecated reset()
Previously the method attempted to reset only as a last resort.
Now reset() is deprecated and resetting must happen between emitting
modelAboutToBeReset() and modelReset(). Since this suffices in all
cases to notify views that they must reinterrogate the model, it is no
longer necessary to signal explicitly row removals and insertions
within the scope of the reset.
Additionally, fetchMore() is now called within the scope of the reset
so insert signals do not have to be emitted here either.
This improved handling of resetting in QSqlQueryModel also allows the
cache in QSqlTableModel to be cleared directly at select().
This change may actually allow views to operate more efficiently since
they no longer have to react to separate row removal and insert
signals. Views can avoid pointless deallocation and reallocation
by considering row count only after the reset is finished. The cost is
that the columns and horizontal headers must be considered in the view
at each setQuery() call. In any case, it is not clear that trying to
be smart about this in the model justifies additional complexity.
Tests had to be adjusted where they expected explicit row removal
and insert signals.
Change-Id: I4f7eac1419824361d7d9bdcc6a87092b33e80d7a
Task-Id: QTBUG-25419
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Mark Brand [Sun, 22 Apr 2012 21:17:33 +0000 (23:17 +0200)]
QSqlQueryModel::fetchMore() documentation fix
Change-Id: If046e674abad9c2dcff934a2fdd80d4133e1f4ad
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Andreas Holzammer [Mon, 23 Apr 2012 08:48:45 +0000 (10:48 +0200)]
Set default Lighthouse plugin for QNX
Change-Id: Id1e51fcd3ce795b2c408d0376679597f6da5c33a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Stephen Kelly [Wed, 18 Apr 2012 13:07:23 +0000 (15:07 +0200)]
Build the QNX plugin with -no-opengl enabled.
Change-Id: I776a3eb0d7ada4399b8c191bbfa1e3ed9236b20e
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Stephen Kelly [Wed, 18 Apr 2012 14:46:26 +0000 (16:46 +0200)]
Move the CMake unit tests to auto/
This will allow the CI system to run the tests. The tests are only
run if cmake is found.
Change-Id: Ie73a56114c151871160bafcbf0b90b2d54620855
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Stephen Kelly [Fri, 20 Apr 2012 17:43:00 +0000 (19:43 +0200)]
Don't tell CMake we're making debug libraries if we're not.
The config option debug_and_release is set on Windows and on
mac (unless xcode is used independently of whether Qt is configured
with -release or not.)
We need to check CONFIG(release,debug|release) to see if
-release was set.
Change-Id: Ibf952958874f6b102981526b3397e848c207a3f2
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Olivier Goffart [Fri, 20 Apr 2012 12:09:55 +0000 (14:09 +0200)]
Fix compilation of QDesktopServices without deprecated
Change-Id: I9e225d32b3f7db403cf3eea6a277580b4b7410a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Olivier Goffart [Sun, 22 Apr 2012 17:50:48 +0000 (19:50 +0200)]
Fix warning in qobject.cpp
Variable only used in debug mode
Change-Id: I6601ca68c427b909680423ae81802f1ed5cd178a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Miikka Heikkinen [Mon, 23 Apr 2012 11:27:02 +0000 (14:27 +0300)]
Windows: Fix QRawFont loading from data.
The implementation for loading QRawFont from data was missing from
Windows QPA plugin.
For freetype font database, just called the parent QBasicFontDatabse
implementation.
For native font database, ported the implementation from Qt 4.8
qrawfont_win.cpp.
Task-number: QTBUG-24197
Change-Id: Ia784d4cbc4f37c925aa49e53d04faf06a7169a73
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Jason McDonald [Fri, 20 Apr 2012 14:25:11 +0000 (00:25 +1000)]
Start running some disabled tests again on Mac OS.
These tests were disabled when trying to get CI working on Mac OS
because they asserted or crashed. Now that CI is working well on Mac
OS, start running these tests again, initially as insignificant tests.
CI results will then be used to determine whether the tests can be made
significant.
Change-Id: Ife411e6b8c84ade45c865ef35f3ae0071d6f8d2b
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Casper van Donderen [Fri, 20 Apr 2012 11:56:50 +0000 (13:56 +0200)]
QDoc: Support -indexdir on CLI and depends in qdocconf.
You can now specify a list of modules in the "depends" qdocconf
variable. This stringlist is then used by the -indexdir option to
specify in which directory to search for [depends entry]/[depends entry].index
Change-Id: Icab6dd0133e180ac04365da9605743def6fb754d
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Casper van Donderen [Sat, 21 Apr 2012 07:17:40 +0000 (09:17 +0200)]
Doc: Fix most QDoc errors in QtXml.
Changes:
- XML processing document moved from Qt XML Patterns.
- Moves documentation from /doc/src to /src/xml/doc
- Add new qdocconf file.
Change-Id: I4bc2104714a28905304997e5ff252e662ddf0bee
Reviewed-by: Jerome Pasion <jerome.pasion@nokia.com>
Jonathan Liu [Sun, 22 Apr 2012 11:21:11 +0000 (21:21 +1000)]
Fix unmatched double quote character
Change-Id: I25fb7dac38db2800ce974d40ec275d510f6d47f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Jason McDonald [Thu, 19 Apr 2012 13:04:55 +0000 (23:04 +1000)]
Re-enable QGraphicsView test on Windows, Mac and Ubuntu 11.10.
On Windows, the test had a stable failure and an XPASS related to an
already closed bug report. On Mac, the test had one stable failure, on
the same statement that had the XPASS on Windows. On Ubuntu, the test
has been passing consistently.
Mark the stable failures with QEXPECT_FAIL, remove the QEXPECT_FAIL that
causes the XPASS, and remove the insignificant_test markers to re-enable
the test.
Task-number: QTBUG-24296
Change-Id: I05dd16b39296919268fee216332929df591f2b66
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Kalle Viironen [Tue, 17 Apr 2012 13:43:40 +0000 (16:43 +0300)]
Fix bug in qsslsocket peek()
Calling peek() for qsslsocket caused socket data to be copied into
qiodevices buffer and therefore make it unaccessible in qsslsocket.
Cherry picked form 4.8-branch & modified to Qt5 API changes
(int -> qintptr)
Original commits:
commit
621f18955082fc73471e75d1f8c35c2dcd4befeb
Author: Shane Kearns <ext-shane.2.kearns@nokia.com>
commit
68b1d5c17aa38d5921bdade2b0e0cb67c6c90513
Author: Kalle Viironen <kalle.viironen@digia.com>
Task-number: QTBUG-18498
Change-Id: I6be4b19baec2f3197537f5e7b61432040ec84ad2
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Jason McDonald [Thu, 19 Apr 2012 11:52:07 +0000 (21:52 +1000)]
Fix XPASS in QGraphicsWidget test on Ubuntu 11.10.
This test was marked insignficiant on Ubuntu 11.10, but the only failure
was an XPASS. Make the test significant again, and only include the
QEXPECT_FAIL for CI platforms where the test is known to fail, i.e.
Windows and Ubuntu 10.04.
Task-number: QTBUG-20778
Change-Id: I24af3dab45118758382ba03c8c7a310f16301f8c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Jason McDonald [Thu, 19 Apr 2012 10:43:52 +0000 (20:43 +1000)]
Remove insignification from QGraphicsProxyWidget test on Windows.
This test has three stable failures on Windows. Mark those failures
with QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-24294
Change-Id: I9eee2701a228912c3a91fa730e712661fb93add6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Jason McDonald [Thu, 19 Apr 2012 08:51:37 +0000 (18:51 +1000)]
Remove insignification from QCompleter autotest.
Until March 15, 2012, this test failed consistently on Mac and passed
on other platforms. Since then, the test has passed consistently on all
platforms.
Change-Id: Ie773643a1c9dc0ab3596786badbc3c3afd4824d6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Stephen Kelly [Wed, 18 Apr 2012 10:07:10 +0000 (12:07 +0200)]
Make the QNX QPA plugin work with non blackberry.
Change-Id: Id85d18d9f21711e8d53e8e4bfdf39d10e135f593
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Kevin Krammer [Fri, 20 Apr 2012 15:53:54 +0000 (17:53 +0200)]
Send Expose event when top level window becomes visible
Change-Id: I0b45c27fa03bbe073c88ce8d01d9fb283f4051c1
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Girish Ramakrishnan [Mon, 23 Apr 2012 03:11:01 +0000 (05:11 +0200)]
QTextLayout::d is private
Compile fix for tst_qtextscriptengine.cpp test on the mac.
Change-Id: I912a339c6c659dc8958cc5997a331e3c18c9cb06
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rohan McGovern [Mon, 23 Apr 2012 00:09:09 +0000 (10:09 +1000)]
Removed invalid C-style license header from .pro file
/* C-style comments */ cannot be parsed by qmake.
Additionally, Qt Project legal has agreed that .pro files do not need to
be covered by license headers.
Change-Id: Ie4d75ee09c2fc85a2f954ec4a931b36ea9d51d93
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Michael Brasser [Thu, 19 Apr 2012 02:27:45 +0000 (12:27 +1000)]
Don't assume QAbstractDeclarativeData::objectNameChanged is available.
Preparation for removal from declarative now that a proper NOTIFY
signal exists.
Change-Id: If0acb73b73d17c49dc8de211d95ecd1e8e80ff1b
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Thiago Macieira [Fri, 20 Apr 2012 12:31:12 +0000 (14:31 +0200)]
Use org.example instead of com.trolltech for the D-Bus examples
We could use org.qtproject, but since this is an example anyway, and
since example.org and example.com are reserved to IANA by RFC 2606
anyway, let's use that.
Task-number: QTBUG-23274
Change-Id: Icdb1ac0390f88b72fa21b02ab362f1a98f26266c
Reviewed-by: Lorn Potter <lorn.potter@nokia.com>
Thiago Macieira [Fri, 20 Apr 2012 12:34:15 +0000 (14:34 +0200)]
Replace com.trolltech with org.qtproject in D-Bus's performance tests
I had missed these, apparently.
Task-number: QTBUG-23274
Change-Id: I6455dc34b18ec9cefccfe527b3fd3ad34fb61aa3
Reviewed-by: Lorn Potter <lorn.potter@nokia.com>
Olivier Goffart [Fri, 20 Apr 2012 14:55:59 +0000 (16:55 +0200)]
Examples: Don't use deprecated methods
Change-Id: Ib6e795f6b5bb6a3ac19882a5fb224460ef1fc8ad
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Thiago Macieira [Wed, 28 Mar 2012 19:28:46 +0000 (16:28 -0300)]
Ensure that qXXXdetection.h can be included directly
Those files might have dependency on one another, on qconfig.h and on
early qglobal.h definitions, so ensure that the only correct include
order is that of qglobal.h.
Change-Id: I89098bacaf16353ee8b51604ee885508dc8e201a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Thiago Macieira [Wed, 28 Mar 2012 19:41:07 +0000 (16:41 -0300)]
Make the fallback Q_ASSUME and Q_UNREACHABLE be qt_noop
That way, we can properly add ; after them, and I can use Q_ASSUME in
Q_ASSERT's else condition.
Change-Id: Iad35819fbb06714116b7dd0f952e1c2c89044c72
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>