Josef Bacik [Fri, 23 Oct 2020 13:58:10 +0000 (09:58 -0400)]
btrfs: load free space cache asynchronously
While documenting the usage of the commit_root_sem, I noticed that we do
not actually take the commit_root_sem in the case of the free space
cache. This is problematic because we're supposed to hold that sem
while we're reading the commit roots, which is what we do for the free
space cache.
The reason I did it inline when I originally wrote the code was because
there's the case of unpinning where we need to make sure that the free
space cache is loaded if we're going to use the free space cache. But
we can accomplish the same thing by simply waiting for the cache to be
loaded.
Rework this code to load the free space cache asynchronously. This
allows us to greatly cleanup the caching code because now it's all
shared by the various caching methods. We also are now in a position to
have the commit_root semaphore held while we're loading the free space
cache. And finally our modification of ->last_byte_to_unpin is removed
because it can be handled in the proper way on commit.
Some care must be taken when replaying the log, when we expect that the
free space cache will be read entirely before we start excluding space
to replay. This could lead to overwriting space during replay.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 23 Oct 2020 13:58:09 +0000 (09:58 -0400)]
btrfs: load the free space cache inode extents from commit root
Historically we've allowed recursive locking specifically for the free
space inode. This is because we are only doing reads and know that it's
safe. However we don't actually need this feature, we can get away with
reading the commit root for the extents. In fact if we want to allow
asynchronous loading of the free space cache we have to use the commit
root, otherwise we will deadlock.
Switch to using the commit root for the file extents. These are only
read at load time, and are replaced as soon as we start writing the
cache out to disk. The cache is never read again, so this is
legitimate. This matches what we do for the inode itself, as we read
that from the commit root as well.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 23 Oct 2020 13:58:08 +0000 (09:58 -0400)]
btrfs: load free space cache into a temporary ctl
The free space cache has been special in that we would load it right
away instead of farming the work off to a worker thread. This resulted
in some weirdness that had to be taken into account for this fact,
namely that if we every found a block group being cached the fast way we
had to wait for it to finish, because we could get the cache before it
had been validated and we may throw the cache away.
To handle this particular case instead create a temporary
btrfs_free_space_ctl to load the free space cache into. Then once we've
validated that it makes sense, copy it's contents into the actual
block_group->free_space_ctl. This allows us to avoid the problems of
needing to wait for the caching to complete, we can clean up the discard
extent handling stuff in __load_free_space_cache, and we no longer need
to do the merge_space_tree() because the space is added one by one into
the real free_space_ctl. This will allow further reworks of how we
handle loading the free space cache.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 23 Oct 2020 13:58:07 +0000 (09:58 -0400)]
btrfs: cleanup btrfs_discard_update_discardable usage
This passes in the block_group and the free_space_ctl, but we can get
this from the block group itself. Part of this is because we call it
from __load_free_space_cache, which can be called for the inode cache as
well.
Move that call into the block group specific load section, wrap it in
the right lock that we need for the assertion (but otherwise this is
safe without the lock because this happens in single-thread context).
Fix up the arguments to only take the block group. Add a lockdep_assert
as well for good measure to make sure we don't mess up the locking
again.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 23 Oct 2020 13:58:06 +0000 (09:58 -0400)]
btrfs: explicitly protect ->last_byte_to_unpin in unpin_extent_range
Currently unpin_extent_range happens in the transaction commit context,
so we are protected from ->last_byte_to_unpin changing while we're
unpinning, because any new transactions would have to wait for us to
complete before modifying ->last_byte_to_unpin.
However in the future we may want to change how this works, for instance
with async unpinning or other such TODO items. To prepare for that
future explicitly protect ->last_byte_to_unpin with the commit_root_sem
so we are sure it won't change while we're doing our work.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 23 Oct 2020 13:58:05 +0000 (09:58 -0400)]
btrfs: update last_byte_to_unpin in switch_commit_roots
While writing an explanation for the need of the commit_root_sem for
btrfs_prepare_extent_commit, I realized we have a slight hole that could
result in leaked space if we have to do the old style caching. Consider
the following scenario
commit root
+----+----+----+----+----+----+----+
|\\\\| |\\\\|\\\\| |\\\\|\\\\|
+----+----+----+----+----+----+----+
0 1 2 3 4 5 6 7
new commit root
+----+----+----+----+----+----+----+
| | | |\\\\| | |\\\\|
+----+----+----+----+----+----+----+
0 1 2 3 4 5 6 7
Prior to this patch, we run btrfs_prepare_extent_commit, which updates
the last_byte_to_unpin, and then we subsequently run
switch_commit_roots. In this example lets assume that
caching_ctl->progress == 1 at btrfs_prepare_extent_commit() time, which
means that cache->last_byte_to_unpin == 1. Then we go and do the
switch_commit_roots(), but in the meantime the caching thread has made
some more progress, because we drop the commit_root_sem and re-acquired
it. Now caching_ctl->progress == 3. We swap out the commit root and
carry on to unpin.
The race can happen like:
1) The caching thread was running using the old commit root when it
found the extent for [2, 3);
2) Then it released the commit_root_sem because it was in the last
item of a leaf and the semaphore was contended, and set ->progress
to 3 (value of 'last'), as the last extent item in the current leaf
was for the extent for range [2, 3);
3) Next time it gets the commit_root_sem, will start using the new
commit root and search for a key with offset 3, so it never finds
the hole for [2, 3).
So the caching thread never saw [2, 3) as free space in any of the
commit roots, and by the time finish_extent_commit() was called for
the range [0, 3), ->last_byte_to_unpin was 1, so it only returned the
subrange [0, 1) to the free space cache, skipping [2, 3).
In the unpin code we have last_byte_to_unpin == 1, so we unpin [0,1),
but do not unpin [2,3). However because caching_ctl->progress == 3 we
do not see the newly freed section of [2,3), and thus do not add it to
our free space cache. This results in us missing a chunk of free space
in memory (on disk too, unless we have a power failure before writing
the free space cache to disk).
Fix this by making sure the ->last_byte_to_unpin is set at the same time
that we swap the commit roots, this ensures that we will always be
consistent.
CC: stable@vger.kernel.org # 5.8+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ update changelog with Filipe's review comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 23 Oct 2020 13:58:04 +0000 (09:58 -0400)]
btrfs: do not shorten unpin len for caching block groups
While fixing up our ->last_byte_to_unpin locking I noticed that we will
shorten len based on ->last_byte_to_unpin if we're caching when we're
adding back the free space. This is correct for the free space, as we
cannot unpin more than ->last_byte_to_unpin, however we use len to
adjust the ->bytes_pinned counters and such, which need to track the
actual pinned usage. This could result in
WARN_ON(space_info->bytes_pinned) triggering at unmount time.
Fix this by using a local variable for the amount to add to free space
cache, and leave len untouched in this case.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 29 Oct 2020 14:33:45 +0000 (15:33 +0100)]
btrfs: reorder extent buffer members for better packing
After the rwsem replaced the tree lock implementation, the extent buffer
got smaller but leaving some holes behind. By changing log_index type
and reordering, we can squeeze the size further to 240 bytes, measured on
release config on x86_64. Log_index spans only 3 values and needs to be
signed.
Before:
struct extent_buffer {
u64 start; /* 0 8 */
long unsigned int len; /* 8 8 */
long unsigned int bflags; /* 16 8 */
struct btrfs_fs_info * fs_info; /* 24 8 */
spinlock_t refs_lock; /* 32 4 */
atomic_t refs; /* 36 4 */
atomic_t io_pages; /* 40 4 */
int read_mirror; /* 44 4 */
struct callback_head callback_head __attribute__((__aligned__(8))); /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
pid_t lock_owner; /* 64 4 */
bool lock_recursed; /* 68 1 */
/* XXX 3 bytes hole, try to pack */
struct rw_semaphore lock; /* 72 40 */
short int log_index; /* 112 2 */
/* XXX 6 bytes hole, try to pack */
struct page * pages[16]; /* 120 128 */
/* size: 248, cachelines: 4, members: 14 */
/* sum members: 239, holes: 2, sum holes: 9 */
/* forced alignments: 1 */
/* last cacheline: 56 bytes */
} __attribute__((__aligned__(8)));
After:
struct extent_buffer {
u64 start; /* 0 8 */
long unsigned int len; /* 8 8 */
long unsigned int bflags; /* 16 8 */
struct btrfs_fs_info * fs_info; /* 24 8 */
spinlock_t refs_lock; /* 32 4 */
atomic_t refs; /* 36 4 */
atomic_t io_pages; /* 40 4 */
int read_mirror; /* 44 4 */
struct callback_head callback_head __attribute__((__aligned__(8))); /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
pid_t lock_owner; /* 64 4 */
bool lock_recursed; /* 68 1 */
s8 log_index; /* 69 1 */
/* XXX 2 bytes hole, try to pack */
struct rw_semaphore lock; /* 72 40 */
struct page * pages[16]; /* 112 128 */
/* size: 240, cachelines: 4, members: 14 */
/* sum members: 238, holes: 1, sum holes: 2 */
/* forced alignments: 1 */
/* last cacheline: 48 bytes */
} __attribute__((__aligned__(8)));
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 20 Aug 2020 15:46:11 +0000 (11:46 -0400)]
btrfs: locking: rip out path->leave_spinning
We no longer distinguish between blocking and spinning, so rip out all
this code.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 20 Aug 2020 15:46:10 +0000 (11:46 -0400)]
btrfs: locking: remove all the blocking helpers
Now that we're using a rw_semaphore we no longer need to indicate if a
lock is blocking or not, nor do we need to flip the entire path from
blocking to spinning. Remove these helpers and all the places they are
called.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 30 Jun 2020 15:44:49 +0000 (17:44 +0200)]
btrfs: scrub: remove local copy of csum_size from context
The context structure unnecessarily stores copy of the checksum size,
that can be now easily obtained from fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 30 Jun 2020 15:42:23 +0000 (17:42 +0200)]
btrfs: check integrity: remove local copy of csum_size
The state structure unnecessarily stores copy of the checksum size, that
can be now easily obtained from fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 30 Jun 2020 16:04:02 +0000 (18:04 +0200)]
btrfs: remove unnecessary local variables for checksum size
Remove local variable that is then used just once and replace it with
fs_info::csum_size.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 2 Jul 2020 09:27:30 +0000 (11:27 +0200)]
btrfs: switch cached fs_info::csum_size from u16 to u32
The fs_info value is 32bit, switch also the local u16 variables. This
leads to a better assembly code generated due to movzwl.
This simple change will shave some bytes on x86_64 and release config:
text data bss dec hex filename
1090000 17980 14912 1122892 11224c pre/btrfs.ko
1089794 17980 14912 1122686 11217e post/btrfs.ko
DELTA: -206
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 30 Jun 2020 00:01:31 +0000 (02:01 +0200)]
btrfs: use cached value of fs_info::csum_size everywhere
btrfs_get_16 shows up in the system performance profiles (helper to read
16bit values from on-disk structures). This is partially because of the
checksum size that's frequently read along with data reads/writes, other
u16 uses are from item size or directory entries.
Replace all calls to btrfs_super_csum_size by the cached value from
fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 2 Jul 2020 08:54:11 +0000 (10:54 +0200)]
btrfs: precalculate checksums per leaf once
btrfs_csum_bytes_to_leaves shows up in system profiles, which makes it a
candidate for optimizations. After the 64bit division has been replaced
by shift, there's still a calculation done each time the function is
called: checksums per leaf.
As this is a constant value for the entire filesystem lifetime, we
can calculate it once at mount time and reuse. This also allows to
reduce the division to 64bit/32bit as we know the constant will always
fit the 32bit type.
Replace the open-coded rounding up with a macro that internally handles
the 64bit division and as it's now a short function, make it static
inline (slight code increase, slight stack usage reduction).
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 2 Jul 2020 09:10:18 +0000 (11:10 +0200)]
btrfs: store precalculated csum_size in fs_info
In many places we need the checksum size and it is inefficient to read
it from the raw superblock. Store the value into fs_info, actual use
will be in followup patches. The size is u32 as it allows to generate
better assembly than with u16.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 1 Jul 2020 19:19:09 +0000 (21:19 +0200)]
btrfs: replace s_blocksize_bits with fs_info::sectorsize_bits
The value of super_block::s_blocksize_bits is the same as
fs_info::sectorsize_bits, but we don't need to do the extra dereferences
in many functions and storing the bits as u32 (in fs_info) generates
shorter assembly.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 1 Jul 2020 19:07:40 +0000 (21:07 +0200)]
btrfs: replace div_u64 by shift in free_space_bitmap_size
Change free_space_bitmap_size to take btrfs_fs_info so we can get the
sectorsize_bits to do calculations.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 1 Jul 2020 18:45:04 +0000 (20:45 +0200)]
btrfs: use precalculated sectorsize_bits from fs_info
We do a lot of calculations where we divide or multiply by sectorsize.
We also know and make sure that sectorsize is a power of two, so this
means all divisions can be turned to shifts and avoid eg. expensive
u64/u32 divisions.
The type is u32 as it's more register friendly on x86_64 compared to u8
and the resulting assembly is smaller (movzbl vs movl).
There's also superblock s_blocksize_bits but it's usually one more
pointer dereference farther than fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 21 Oct 2020 06:25:01 +0000 (14:25 +0800)]
btrfs: rename page_size to io_size in submit_extent_page
The variable @page_size in submit_extent_page() is not related to page
size.
It can already be smaller than PAGE_SIZE, so rename it to io_size to
reduce confusion, this is especially important for later subpage
support.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 21 Oct 2020 06:24:58 +0000 (14:24 +0800)]
btrfs: only require sector size alignment for page read
If we're reading partial page, btrfs will warn about this as read/write
is always done in sector size, which now equals page size.
But for the upcoming subpage read-only support, our data read is only
aligned to sectorsize, which can be smaller than page size.
Thus here we change the warning condition to check it against
sectorsize, the behavior is not changed for regular sectorsize ==
PAGE_SIZE case, and won't report error for subpage read.
Also, pass the proper start/end with bv_offset for check_data_csum() to
handle.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 21 Oct 2020 06:24:57 +0000 (14:24 +0800)]
btrfs: rename pages_locked in process_pages_contig()
Function process_pages_contig() does not only handle page locking but
also other operations. Rename the local variable pages_locked to
pages_processed to reduce confusion.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 21 Oct 2020 06:24:54 +0000 (14:24 +0800)]
btrfs: sink parameter start and len to check_data_csum
For check_data_csum(), the page we're using is directly from the inode
mapping, thus it has valid page_offset().
We can use (page_offset() + pg_off) to replace @start parameter
completely, while the @len should always be sectorsize.
Since we're here, also add some comment, as there are quite some
confusion in words like start/offset, without explaining whether it's
file_offset or logical bytenr.
This should not affect the existing behavior, as for current sectorsize
== PAGE_SIZE case, @pgoff should always be 0, and len is always
PAGE_SIZE (or sectorsize from the dio read path).
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 21 Oct 2020 06:24:53 +0000 (14:24 +0800)]
btrfs: replace fs_info and private_data with inode in btrfs_wq_submit_bio
All callers of btrfs_wq_submit_bio() pass struct inode as @private_data,
so there is no need for it to be (void *), replace it with "struct inode
*inode".
While we can extract fs_info from struct inode, also remove the @fs_info
parameter.
Since we're here, also replace all the (void *private_data) into (struct
inode *inode).
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 21 Oct 2020 06:24:51 +0000 (14:24 +0800)]
btrfs: sink the failed_start parameter to set_extent_bit
The @failed_start parameter is only paired with @exclusive_bits, and
those parameters are only used for EXTENT_LOCKED bit, which have their
own wrappers lock_extent_bits().
Thus for regular set_extent_bit() calls, the failed_start makes no
sense, just sink the parameter.
Also, since @failed_start and @exclusive_bits are used in pairs, add
an assert to make it obvious.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 21 Oct 2020 06:24:50 +0000 (14:24 +0800)]
btrfs: update the comment for find_first_extent_bit
The pitfall here is, if the parameter @bits has multiple bits set, we
will return the first range which just has one of the specified bits
set.
This is a little tricky if we want an exact match. Anyway, update the
comment to make that clear.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 21 Oct 2020 06:24:49 +0000 (14:24 +0800)]
btrfs: fix the comment on lock_extent_buffer_for_io
The return value of that function is completely wrong.
That function only returns 0 if the extent buffer doesn't need to be
submitted. The "ret = 1" and "ret = 0" are determined by the return
value of "test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)".
And if we get ret == 1, it's because the extent buffer is dirty, and we
set its status to EXTENT_BUFFER_WRITE_BACK, and continue to page
locking.
While if we get ret == 0, it means the extent is not dirty from the
beginning, so we don't need to write it back.
The caller also follows this, in btree_write_cache_pages(), if
lock_extent_buffer_for_io() returns 0, we just skip the extent buffer
completely.
So the comment is completely wrong.
Since we're here, also change the description a little. The write bio
flushing won't be visible to the caller, thus it's not an major feature.
In the main description, only describe the locking part to make the
point more clear.
For reference, added in commit
2e3c25136adf ("btrfs: extent_io: add
proper error handling to lock_extent_buffer_for_io()")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 15 Sep 2020 12:18:23 +0000 (14:18 +0200)]
btrfs: remove unnecessary casts in printk
Long time ago the explicit casts were necessary for u64 but we don't
need it. Remove casts where the type matches, leaving only cases that
cast sector_t or loff_t.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 15 Sep 2020 19:44:52 +0000 (21:44 +0200)]
btrfs: add set/get accessors for root_item::drop_level
The drop_level member is used directly unlike all the other int types in
root_item. Add the definition and use it everywhere. The type is u8 so
there's no conversion necessary and the helpers are properly inlined,
this is for consistency.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 15 Sep 2020 19:00:04 +0000 (21:00 +0200)]
btrfs: use root_item helpers for limit and flags in btrfs_create_tree
For consistency use the available helpers to set flags and limit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 15 Sep 2020 12:26:27 +0000 (14:26 +0200)]
btrfs: check-integrity: use proper helper to access btrfs_header
There's one raw use of le->cpu conversion but we have a helper to do
that for us, so use it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 15 Sep 2020 12:30:15 +0000 (14:30 +0200)]
btrfs: send: use helpers to access root_item::ctransid
We have helpers to access the on-disk item members, use that for
root_item::ctransid instead of raw le64_to_cpu.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 29 Sep 2020 12:56:39 +0000 (14:56 +0200)]
btrfs: generate lockdep keyset names at compile time
The names in btrfs_lockdep_keysets are generated from a simple pattern
using snprintf but we can generate them directly with some macro magic
and remove the helpers.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 27 Oct 2020 14:54:08 +0000 (15:54 +0100)]
btrfs: use the right number of levels for lockdep keysets
BTRFS_MAX_LEVEL is 8 and the keyset table is supposed to have a key for
each level, but we'll never have more than 8 levels. The values passed
to btrfs_set_buffer_lockdep_class are always derived from a valid extent
buffer. Set the array sizes to the right value.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Thu, 24 Sep 2020 16:39:21 +0000 (11:39 -0500)]
btrfs: remove dio iomap DSYNC workaround
This effectively reverts
09745ff88d93 ("btrfs: dio iomap DSYNC
workaround") now that the iomap API has been updated to allow
iomap_dio_complete() not to be called under i_rwsem anymore.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Thu, 24 Sep 2020 16:39:20 +0000 (11:39 -0500)]
btrfs: call iomap_dio_complete() without inode_lock
If direct writes are called with O_DIRECT | O_DSYNC, it will result in a
deadlock because iomap_dio_rw() is called under i_rwsem which calls:
iomap_dio_complete()
generic_write_sync()
btrfs_sync_file()
btrfs_sync_file() requires i_rwsem, so call __iomap_dio_rw() with the
i_rwsem locked, and call iomap_dio_complete() after unlocking i_rwsem.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Thu, 24 Sep 2020 16:39:19 +0000 (11:39 -0500)]
btrfs: remove btrfs_inode::dio_sem
The inode dio_sem can be eliminated because all DIO synchronization is
now performed through inode->i_rwsem that provides the same guarantees.
This reduces btrfs_inode size by 40 bytes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Thu, 24 Sep 2020 16:39:18 +0000 (11:39 -0500)]
btrfs: use shared lock for direct writes within EOF
Direct writes within EOF are safe to be performed with inode shared lock
to improve parallelization with other direct writes or reads because EOF
is not changed and there is no race with truncate().
Direct reads are already performed under shared inode lock.
This patch is precursor to removing btrfs_inode->dio_sem.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Thu, 24 Sep 2020 16:39:17 +0000 (11:39 -0500)]
btrfs: push inode locking and unlocking into buffered/direct write
Push inode locking and unlocking closer to where we perform the I/O. For
this we need to move the write checks inside the respective functions as
well.
pos is evaluated after generic_write_checks because O_APPEND can change
iocb->ki_pos.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Thu, 24 Sep 2020 16:39:16 +0000 (11:39 -0500)]
btrfs: introduce btrfs_inode_lock()/unlock()
btrfs_inode_lock/unlock() are wrappers around inode locks, separating
the type of lock and actual locking.
- 0 - default, exclusive lock
- BTRFS_ILOCK_SHARED - for shared locks, for possible parallel DIO
- BTRFS_ILOCK_TRY - for the RWF_NOWAIT sequence
The bits SHARED and TRY can be combined together.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Thu, 24 Sep 2020 16:39:15 +0000 (11:39 -0500)]
btrfs: introduce btrfs_write_check()
btrfs_write_check() checks write parameters in one place before
beginning a write. This does away with inode_unlock() after every check.
In the later patches, it will help push inode_lock/unlock() in buffered
and direct write functions respectively.
generic_write_checks needs to be called before as it could truncate
iov_iter and its return used as count.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Thu, 24 Sep 2020 16:39:14 +0000 (11:39 -0500)]
btrfs: check FS error state bit early during write
fs_info::fs_state is a filesystem bit check as opposed to inode and can
be performed before we begin with write checks. This eliminates inode
lock/unlock in case the error bit is set.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Thu, 24 Sep 2020 16:39:13 +0000 (11:39 -0500)]
btrfs: move pos increment and pagecache extension to btrfs_buffered_write
While we do this, correct the call to pagecache_isize_extended:
- pagecache_isize_extended needs to be called to the start of the write
as opposed to i_size
- we don't need to check range before the call, this is done in the
function
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Thu, 24 Sep 2020 16:39:12 +0000 (11:39 -0500)]
btrfs: split btrfs_direct_IO to read and write
The read and write DIO don't have anything in common except for the
call to iomap_dio_rw. Extract the write call into a new function to get
rid of conditional statements for direct write.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 28 Oct 2020 13:14:47 +0000 (21:14 +0800)]
btrfs: sysfs: add per-fs attribute for read policy
Add
/sys/fs/btrfs/UUID/read_policy
attribute so that the read policy for the raid1, raid1c34 and raid10 can
be tuned.
When this attribute is read, it will show all available policies, with
active policy in [ ]. The read_policy attribute can be written using one
of the items listed in there.
For example:
$ cat /sys/fs/btrfs/UUID/read_policy
[pid]
$ echo pid > /sys/fs/btrfs/UUID/read_policy
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 28 Oct 2020 13:14:46 +0000 (21:14 +0800)]
btrfs: create read policy framework
As of now, we use the pid method to read striped mirrored data, which
means process id determines the stripe id to read. This type of routing
typically helps in a system with many small independent processes tying
to read random data. On the other hand, the pid based read IO policy is
inefficient because if there is a single process trying to read a large
file, the overall disk bandwidth remains underutilized.
So this patch introduces a read policy framework so that we could add
more read policies, such as IO routing based on the device's wait-queue
or manual when we have a read-preferred device or a policy based on the
target storage caching.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 28 Oct 2020 13:14:45 +0000 (21:14 +0800)]
btrfs: add helper for string match ignoring leading/trailing whitespace
Add a generic helper to match the string in a given buffer, and ignore
the leading and trailing whitespace.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename variables, add comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 27 Oct 2020 12:40:06 +0000 (12:40 +0000)]
btrfs: do not start and wait for delalloc on snapshot roots on transaction commit
We do not need anymore to start writeback for delalloc of roots that are
being snapshotted and wait for it to complete. This was done in commit
609e804d771f59 ("Btrfs: fix file corruption after snapshotting due to mix
of buffered/DIO writes") to fix a type of file corruption where files in a
snapshot end up having their i_size updated in a non-ordered way, leaving
implicit file holes, when buffered IO writes that increase a file's size
are followed by direct IO writes that also increase the file's size.
This is not needed anymore because we now have a more generic mechanism
to prevent a non-ordered i_size update since commit
9ddc959e802bf7
("btrfs: use the file extent tree infrastructure"), which addresses this
scenario involving snapshots as well.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 20 Aug 2020 15:46:09 +0000 (11:46 -0400)]
btrfs: switch extent buffer tree lock to rw_semaphore
Historically we've implemented our own locking because we wanted to be
able to selectively spin or sleep based on what we were doing in the
tree. For instance, if all of our nodes were in cache then there's
rarely a reason to need to sleep waiting for node locks, as they'll
likely become available soon. At the time this code was written the
rw_semaphore didn't do adaptive spinning, and thus was orders of
magnitude slower than our home grown locking.
However now the opposite is the case. There are a few problems with how
we implement blocking locks, namely that we use a normal waitqueue and
simply wake everybody up in reverse sleep order. This leads to some
suboptimal performance behavior, and a lot of context switches in highly
contended cases. The rw_semaphores actually do this properly, and also
have adaptive spinning that works relatively well.
The locking code is also a bit of a bear to understand, and we lose the
benefit of lockdep for the most part because the blocking states of the
lock are simply ad-hoc and not mapped into lockdep.
So rework the locking code to drop all of this custom locking stuff, and
simply use a rw_semaphore for everything. This makes the locking much
simpler for everything, as we can now drop a lot of cruft and blocking
transitions. The performance numbers vary depending on the workload,
because generally speaking there doesn't tend to be a lot of contention
on the btree. However, on my test system which is an 80 core single
socket system with 256GiB of RAM and a 2TiB NVMe drive I get the
following results (with all debug options off):
dbench 200 baseline
Throughput 216.056 MB/sec 200 clients 200 procs max_latency=1471.197 ms
dbench 200 with patch
Throughput 737.188 MB/sec 200 clients 200 procs max_latency=714.346 ms
Previously we also used fs_mark to test this sort of contention, and
those results are far less impressive, mostly because there's not enough
tasks to really stress the locking
fs_mark -d /d[0-15] -S 0 -L 20 -n 100000 -s 0 -t 16
baseline
Average Files/sec: 160166.7
p50 Files/sec: 165832
p90 Files/sec: 123886
p99 Files/sec: 123495
real 3m26.527s
user 2m19.223s
sys 48m21.856s
patched
Average Files/sec: 164135.7
p50 Files/sec: 171095
p90 Files/sec: 122889
p99 Files/sec: 113819
real 3m29.660s
user 2m19.990s
sys 44m12.259s
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 22 Oct 2020 15:40:46 +0000 (18:40 +0300)]
btrfs: open code insert_orphan_item
Just open code it in its sole caller and remove a level of indirection.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 16 Oct 2020 15:29:20 +0000 (11:29 -0400)]
btrfs: introduce mount option rescue=all
Now that we have the building blocks for some better recovery options
with corrupted file systems, add a rescue=all option to enable all of
the relevant rescue options. This will allow distros to simply default
to rescue=all for the "oh dear lord the world's on fire" recovery
without needing to know all the different options that we have and may
add in the future.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 16 Oct 2020 15:29:19 +0000 (11:29 -0400)]
btrfs: introduce mount option rescue=ignoredatacsums
There are cases where you can end up with bad data csums because of
misbehaving applications. This happens when an application modifies a
buffer in-flight when doing an O_DIRECT write. In order to recover the
file we need a way to turn off data checksums so you can copy the file
off, and then you can delete the file and restore it properly later.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 16 Oct 2020 15:29:18 +0000 (11:29 -0400)]
btrfs: introduce mount option rescue=ignorebadroots
In the face of extent root corruption, or any other core fs wide root
corruption we will fail to mount the file system. This makes recovery
kind of a pain, because you need to fall back to userspace tools to
scrape off data. Instead provide a mechanism to gracefully handle bad
roots, so we can at least mount read-only and possibly recover data from
the file system.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 16 Oct 2020 15:29:17 +0000 (11:29 -0400)]
btrfs: show rescue=usebackuproot in /proc/mounts
The standalone option usebackuproot was intended as one-time use and it
was not necessary to keep it in the option list. Now that we're going to
have more rescue options, it's desirable to keep them intact as it could
be confusing why the option disappears.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ remove the btrfs_clear_opt part from open_ctree ]
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 16 Oct 2020 15:29:16 +0000 (11:29 -0400)]
btrfs: add a helper to print out rescue= options
We're going to have a lot of rescue options, add a helper to collapse
the /proc/mounts output to rescue=option1:option2:option3 format.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 16 Oct 2020 15:29:15 +0000 (11:29 -0400)]
btrfs: sysfs: export supported rescue= mount options
We're going to be adding a variety of different rescue options, we
should advertise which ones we support to make user spaces life easier
in the future.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 16 Oct 2020 15:29:14 +0000 (11:29 -0400)]
btrfs: push the NODATASUM check into btrfs_lookup_bio_sums
When we move to being able to handle NULL csum_roots it'll be cleaner to
just check in btrfs_lookup_bio_sums instead of at all of the caller
locations, so push the NODATASUM check into it as well so it's unified.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Fri, 16 Oct 2020 15:29:13 +0000 (11:29 -0400)]
btrfs: unify the ro checking for mount options
We're going to be adding more options that require RDONLY, so add a
helper to do the check and error out if we don't have RDONLY set.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 12 Oct 2020 10:55:26 +0000 (11:55 +0100)]
btrfs: do not start readahead for csum tree when scrubbing non-data block groups
When scrubbing a stripe of a block group we always start readahead for the
checksums btree and wait for it to complete, however when the blockgroup is
not a data block group (or a mixed block group) it is a waste of time to do
it, since there are no checksums for metadata extents in that btree.
So skip that when the block group does not have the data flag set, saving
some time doing memory allocations, queueing a job in the readahead work
queue, waiting for it to complete and potentially avoiding some IO as well
(when csum tree extents are not in memory already).
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 12 Oct 2020 10:55:25 +0000 (11:55 +0100)]
btrfs: assert we are holding the reada_lock when releasing a readahead zone
When we drop the last reference of a zone, we end up releasing it through
the callback reada_zone_release(), which deletes the zone from a device's
reada_zones radix tree. This tree is protected by the global readahead
lock at fs_info->reada_lock. Currently all places that are sure that they
are dropping the last reference on a zone, are calling kref_put() in a
critical section delimited by this lock, while all other places that are
sure they are not dropping the last reference, do not bother calling
kref_put() while holding that lock.
When working on the previous fix for hangs and use-after-frees in the
readahead code, my initial attempts were different and I actually ended
up having reada_zone_release() called when not holding the lock, which
resulted in weird and unexpected problems. So just add an assertion
there to detect such problem more quickly and make the dependency more
obvious.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Wed, 14 Oct 2020 14:55:45 +0000 (09:55 -0500)]
btrfs: set EXTENT_NORESERVE bits side btrfs_dirty_pages()
Set the extent bits EXTENT_NORESERVE inside btrfs_dirty_pages() as
opposed to calling set_extent_bits again later.
Fold check for written length within the function.
Note: EXTENT_NORESERVE is set before unlocking extents.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Wed, 14 Oct 2020 14:55:44 +0000 (09:55 -0500)]
btrfs: use round_down while calculating start position in btrfs_dirty_pages()
round_down looks prettier than the bit mask operations.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Tue, 15 Sep 2020 15:41:40 +0000 (10:41 -0500)]
btrfs: use iosize while reading compressed pages
While using compression, a submitted bio is mapped with a compressed bio
which performs the read from disk, decompresses and returns uncompressed
data to original bio. The original bio must reflect the uncompressed
size (iosize) of the I/O to be performed, or else the page just gets the
decompressed I/O length of data (disk_io_size). The compressed bio
checks the extent map and gets the correct length while performing the
I/O from disk.
This came up in subpage work when only compressed length of the original
bio was filled in the page. This worked correctly for pagesize ==
sectorsize because both compressed and uncompressed data are at pagesize
boundaries, and would end up filling the requested page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Fri, 25 Sep 2020 20:36:38 +0000 (15:36 -0500)]
btrfs: calculate num_pages, reserve_bytes once in btrfs_buffered_write
write_bytes can change in btrfs_check_nocow_lock(). Calculate variables
such as num_pages and reserve_bytes once we are sure of the value of
write_bytes so there is no need to re-calculate.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 20 Oct 2020 09:44:17 +0000 (12:44 +0300)]
btrfs: calculate more accurate remaining time to sleep in transaction_kthread
If transaction_kthread is woken up before btrfs_fs_info::commit_interval
seconds have elapsed it will sleep for a fixed period of 5 seconds. This
is not a problem per-se but is not accurate. Instead the code should
sleep for an interval which guarantees on next wakeup commit_interval
would have passed. Since time tracking is not precise subtract 1 second
from delta to ensure the delay we end up waiting will be longer than
than the wake up period.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 8 Oct 2020 12:24:29 +0000 (15:24 +0300)]
btrfs: record delta directly in transaction_kthread
Rename 'now' to 'delta' and store there the delta between transaction
start time and current time. This is in preparation for optimising the
sleep logic in the next patch. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 8 Oct 2020 12:24:28 +0000 (15:24 +0300)]
btrfs: remove redundant time check in transaction kthread loop
The value obtained from ktime_get_seconds() is guaranteed to be
monotonically increasing since it's taken from CLOCK_MONOTONIC. As
transaction_kthread obtains a reference to the currently running
transaction under holding btrfs_fs_info::trans_lock it's guaranteed to:
a) see an initialized 'cur', whose start_time is guaranteed to be smaller
than 'now'
or
b) not obtain a 'cur' and simply go to sleep.
Given this remove the unnecessary check, if it sees
now < cur->start_time this would imply there are far greater problems on
the machine.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 8 Oct 2020 12:24:27 +0000 (15:24 +0300)]
btrfs: use helpers to convert from seconds to jiffies in transaction_kthread
The kernel provides easy to understand helpers to convert from human
understandable units to the kernel-friendly 'jiffies'. So let's use
those to make the code easier to understand. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 7 Oct 2020 07:20:03 +0000 (15:20 +0800)]
btrfs: sysfs: export filesystem generation
Matching with the information that's available from the ioctl
FS_INFO, add generation to the per-filesystem directory
/sys/fs/btrfs/UUID/generation, which could be used by scripts.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sun, 6 Dec 2020 22:25:12 +0000 (14:25 -0800)]
Linux 5.10-rc7
Linus Torvalds [Sun, 6 Dec 2020 19:48:17 +0000 (11:48 -0800)]
Merge tag 'char-misc-5.10-rc7' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes, and one "large" revert, for
5.10-rc7.
They include:
- revert mei patch from 5.10-rc1 that was using a reserved userspace
value. It will be resubmitted once the proper id has been assigned
by the virtio people.
- habanalabs fixes found by the fall-through audit from Gustavo
- speakup driver fixes for reported issues
- fpga config build fix for reported issue.
All of these except the revert have been in linux-next with no
reported issues. The revert is "clean" and just removes a
previously-added driver, so no real issue there"
* tag 'char-misc-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "mei: virtio: virtualization frontend driver"
fpga: Specify HAS_IOMEM dependency for FPGA_DFL
habanalabs: put devices before driver removal
habanalabs: free host huge va_range if not used
speakup: Reject setting the speakup line discipline outside of speakup
Linus Torvalds [Sun, 6 Dec 2020 19:43:50 +0000 (11:43 -0800)]
Merge tag 'tty-5.10-rc7' of git://git./linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two tty core fixes for 5.10-rc7.
They resolve some reported locking issues in the tty core. While they
have not been in a released linux-next yet, they have passed all of
the 0-day bot testing as well as the submitter's testing"
* tag 'tty-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix ->session locking
tty: Fix ->pgrp locking in tiocspgrp()
Linus Torvalds [Sun, 6 Dec 2020 19:38:36 +0000 (11:38 -0800)]
Merge tag 'usb-5.10-rc7' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.10-rc7 that resolve a number of
reported issues, and add some new device ids.
Nothing major here, but these solve some problems that people were
having with the 5.10-rc tree:
- reverts for USB storage dma settings that broke working devices
- thunderbolt use-after-free fix
- cdns3 driver fixes
- gadget driver userspace copy fix
- new device ids
All of these except for the reverts have been in linux-next with no
reported issues. The reverts are "clean" and were tested by Hans, as
well as passing the 0-day tests"
* tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: f_fs: Use local copy of descriptors for userspace copy
usb: ohci-omap: Fix descriptor conversion
Revert "usb-storage: fix sdev->host->dma_dev"
Revert "uas: fix sdev->host->dma_dev"
Revert "uas: bump hw_max_sectors to 2048 blocks for SS or faster drives"
USB: serial: kl5kusb105: fix memleak on open
USB: serial: ch341: sort device-id entries
USB: serial: ch341: add new Product ID for CH341A
USB: serial: option: fix Quectel BG96 matching
usb: cdns3: core: fix goto label for error path
usb: cdns3: gadget: clear trb->length as zero after preparing every trb
usb: cdns3: Fix hardware based role switch
USB: serial: option: add support for Thales Cinterion EXS82
USB: serial: option: add Fibocom NL668 variants
thunderbolt: Fix use-after-free in remove_unplugged_switch()
Linus Torvalds [Sun, 6 Dec 2020 19:22:39 +0000 (11:22 -0800)]
Merge tag 'x86-urgent-2020-12-06' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Make the AMD L3 QoS code and data priorization enable/disable
mechanism work correctly.
The control bit was only set/cleared on one of the CPUs in a L3
domain, but it has to be modified on all CPUs in the domain. The
initial documentation was not clear about this, but the updated one
from Oct 2020 spells it out.
- Fix an off by one in the UV platform detection code which causes
the UV hubs to be identified wrongly.
The chip revisions start at 1 not at 0.
- Fix a long standing bug in the evaluation of prefixes in the
uprobes code which fails to handle repeated prefixes properly.
The aggregate size of the prefixes can be larger than the bytes
array but the code blindly iterated over the aggregate size beyond
the array boundary. Add a macro to handle this case properly and
use it at the affected places"
* tag 'x86-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytes
x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes
x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes
x86/platform/uv: Fix UV4 hub revision adjustment
x86/resctrl: Fix AMD L3 QOS CDP enable/disable
Linus Torvalds [Sun, 6 Dec 2020 19:20:18 +0000 (11:20 -0800)]
Merge tag 'perf-urgent-2020-12-06' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two fixes for performance monitoring on X86:
- Add recursion protection to another callchain invoked from
x86_pmu_stop() which can recurse back into x86_pmu_stop(). The
first attempt to fix this missed this extra code path.
- Use the already filtered status variable to check for PEBS counter
overflow bits and not the unfiltered full status read from
IA32_PERF_GLOBAL_STATUS which can have unrelated bits check which
would be evaluated incorrectly"
* tag 'perf-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Check PEBS status correctly
perf/x86/intel: Fix a warning on x86_pmu_stop() with large PEBS
Linus Torvalds [Sun, 6 Dec 2020 19:15:55 +0000 (11:15 -0800)]
Merge tag 'irq-urgent-2020-12-06' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- Make multiqueue devices which use the managed interrupt affinity
infrastructure work on PowerPC/Pseries. PowerPC does not use the
generic infrastructure for setting up PCI/MSI interrupts and the
multiqueue changes failed to update the legacy PCI/MSI
infrastructure. Make this work by passing the affinity setup
information down to the mapping and allocation functions.
- Move Jason Cooper from MAINTAINERS to CREDITS as his mail is
bouncing and he's not reachable. We hope all is well with him and
say thanks for his work over the years"
* tag 'irq-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc/pseries: Pass MSI affinity to irq_create_mapping()
genirq/irqdomain: Add an irq_create_mapping_affinity() function
MAINTAINERS: Move Jason Cooper to CREDITS
Linus Torvalds [Sun, 6 Dec 2020 19:11:32 +0000 (11:11 -0800)]
Merge tag 'locking-urgent-2020-12-06' of git://git./linux/kernel/git/tip/tip
Pull intel_idle build fix from Thomas Gleixner:
"A tiny build fix for a recent change in the intel_idle driver which
missed a CONFIG dependency and broke the build for certain
configurations"
* tag 'locking-urgent-2020-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Build fix
Linus Torvalds [Sun, 6 Dec 2020 18:31:39 +0000 (10:31 -0800)]
Merge tag 'kbuild-fixes-v5.10-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move -Wcast-align to W=3, which tends to be false-positive and there
is no tree-wide solution.
- Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a
preprocessor option and makes sense for .S files as well.
- Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings.
- Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings.
- Fix undesirable line breaks in *.mod files.
* tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid split lines in .mod files
kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1
kbuild: Hoist '--orphan-handling' into Kconfig
Kbuild: do not emit debug info for assembly with LLVM_IAS=1
kbuild: use -fmacro-prefix-map for .S sources
Makefile.extrawarn: move -Wcast-align to W=3
Linus Torvalds [Sun, 6 Dec 2020 18:20:59 +0000 (10:20 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"12 patches.
Subsystems affected by this patch series: mm (memcg, zsmalloc, swap,
mailmap, selftests, pagecache, hugetlb, pagemap), lib, and coredump"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/mmap.c: fix mmap return value when vma is merged after call_mmap()
hugetlb_cgroup: fix offline of hugetlb cgroup with reservations
mm/filemap: add static for function __add_to_page_cache_locked
userfaultfd: selftests: fix SIGSEGV if huge mmap fails
tools/testing/selftests/vm: fix build error
mailmap: add two more addresses of Uwe Kleine-König
mm/swapfile: do not sleep with a spin lock held
mm/zsmalloc.c: drop ZSMALLOC_PGTABLE_MAPPING
mm: list_lru: set shrinker map bit when child nr_items is not zero
mm: memcg/slab: fix obj_cgroup_charge() return value handling
coredump: fix core_pattern parse error
zlib: export S390 symbols for zlib modules
Liu Zixian [Sun, 6 Dec 2020 06:15:15 +0000 (22:15 -0800)]
mm/mmap.c: fix mmap return value when vma is merged after call_mmap()
On success, mmap should return the begin address of newly mapped area,
but patch "mm: mmap: merge vma after call_mmap() if possible" set
vm_start of newly merged vma to return value addr. Users of mmap will
get wrong address if vma is merged after call_mmap(). We fix this by
moving the assignment to addr before merging vma.
We have a driver which changes vm_flags, and this bug is found by our
testcases.
Fixes:
d70cec898324 ("mm: mmap: merge vma after call_mmap() if possible")
Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hongxiang Lou <louhongxiang@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20201203085350.22624-1-liuzixian4@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Sun, 6 Dec 2020 06:15:12 +0000 (22:15 -0800)]
hugetlb_cgroup: fix offline of hugetlb cgroup with reservations
Adrian Moreno was ruuning a kubernetes 1.19 + containerd/docker workload
using hugetlbfs. In this environment the issue is reproduced by:
- Start a simple pod that uses the recently added HugePages medium
feature (pod yaml attached)
- Start a DPDK app. It doesn't need to run successfully (as in transfer
packets) nor interact with real hardware. It seems just initializing
the EAL layer (which handles hugepage reservation and locking) is
enough to trigger the issue
- Delete the Pod (or let it "Complete").
This would result in a kworker thread going into a tight loop (top output):
1425 root 20 0 0 0 0 R 99.7 0.0 5:22.45 kworker/28:7+cgroup_destroy
'perf top -g' reports:
- 63.28% 0.01% [kernel] [k] worker_thread
- 49.97% worker_thread
- 52.64% process_one_work
- 62.08% css_killed_work_fn
- hugetlb_cgroup_css_offline
41.52% _raw_spin_lock
- 2.82% _cond_resched
rcu_all_qs
2.66% PageHuge
- 0.57% schedule
- 0.57% __schedule
We are spinning in the do-while loop in hugetlb_cgroup_css_offline.
Worse yet, we are holding the master cgroup lock (cgroup_mutex) while
infinitely spinning. Little else can be done on the system as the
cgroup_mutex can not be acquired.
Do note that the issue can be reproduced by simply offlining a hugetlb
cgroup containing pages with reservation counts.
The loop in hugetlb_cgroup_css_offline is moving page counts from the
cgroup being offlined to the parent cgroup. This is done for each
hstate, and is repeated until hugetlb_cgroup_have_usage returns false.
The routine moving counts (hugetlb_cgroup_move_parent) is only moving
'usage' counts. The routine hugetlb_cgroup_have_usage is checking for
both 'usage' and 'reservation' counts. Discussion about what to do with
reservation counts when reparenting was discussed here:
https://lore.kernel.org/linux-kselftest/CAHS8izMFAYTgxym-Hzb_JmkTK1N_S9tGN71uS6MFV+R7swYu5A@mail.gmail.com/
The decision was made to leave a zombie cgroup for with reservation
counts. Unfortunately, the code checking reservation counts was
incorrectly added to hugetlb_cgroup_have_usage.
To fix the issue, simply remove the check for reservation counts. While
fixing this issue, a related bug in hugetlb_cgroup_css_offline was
noticed. The hstate index is not reinitialized each time through the
do-while loop. Fix this as well.
Fixes:
1adc4d419aa2 ("hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations")
Reported-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201203220242.158165-1-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Shi [Sun, 6 Dec 2020 06:15:09 +0000 (22:15 -0800)]
mm/filemap: add static for function __add_to_page_cache_locked
mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lkml.kernel.org/r/1604661895-5495-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Axel Rasmussen [Sun, 6 Dec 2020 06:15:05 +0000 (22:15 -0800)]
userfaultfd: selftests: fix SIGSEGV if huge mmap fails
The error handling in hugetlb_allocate_area() was incorrect for the
hugetlb_shared test case.
Previously the behavior was:
- mmap a hugetlb area
- If this fails, set the pointer to NULL, and carry on
- mmap an alias of the same hugetlb fd
- If this fails, munmap the original area
If the original mmap failed, it's likely the second one did too. If
both failed, we'd blindly try to munmap a NULL pointer, causing a
SIGSEGV. Instead, "goto fail" so we return before trying to mmap the
alias.
This issue can be hit "in real life" by forgetting to set
/proc/sys/vm/nr_hugepages (leaving it at 0), and then trying to run the
hugetlb_shared test.
Another small improvement is, when the original mmap fails, don't just
print "it failed": perror(), so we can see *why*. :)
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Alan Gilbert <dgilbert@redhat.com>
Link: https://lkml.kernel.org/r/20201204203443.2714693-1-axelrasmussen@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xingxing Su [Sun, 6 Dec 2020 06:15:02 +0000 (22:15 -0800)]
tools/testing/selftests/vm: fix build error
Only x86 and PowerPC implement the pkey-xxx.h, and an error was reported
when compiling protection_keys.c.
Add a Arch judgment to compile "protection_keys" in the Makefile.
If other arch implement this, add the arch name to the Makefile.
eg:
ifneq (,$(findstring $(ARCH),powerpc mips ... ))
Following build errors:
pkey-helpers.h:93:2: error: #error Architecture not supported
#error Architecture not supported
pkey-helpers.h:96:20: error: `PKEY_DISABLE_ACCESS' undeclared
#define PKEY_MASK (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE)
^
protection_keys.c:218:45: error: `PKEY_DISABLE_WRITE' undeclared
pkey_assert(flags & (PKEY_DISABLE_ACCESS | PKEY_DISABLE_WRITE));
^
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Link: https://lkml.kernel.org/r/1606826876-30656-1-git-send-email-suxingxing@loongson.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Uwe Kleine-König [Sun, 6 Dec 2020 06:14:58 +0000 (22:14 -0800)]
mailmap: add two more addresses of Uwe Kleine-König
This fixes attribution for the commits (among others)
-
d4097456cd1d ("video/framebuffer: move the probe func into
.devinit.text in Blackfin LCD driver")
-
0312e024d6cd ("mfd: mc13xxx: Add support for mc34708")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20201127213358.3440830-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Sun, 6 Dec 2020 06:14:55 +0000 (22:14 -0800)]
mm/swapfile: do not sleep with a spin lock held
We can't call kvfree() with a spin lock held, so defer it. Fixes a
might_sleep() runtime warning.
Fixes:
873d7bcfd066 ("mm/swapfile.c: use kvzalloc for swap_info_struct allocation")
Signed-off-by: Qian Cai <qcai@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201202151549.10350-1-qcai@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim [Sun, 6 Dec 2020 06:14:51 +0000 (22:14 -0800)]
mm/zsmalloc.c: drop ZSMALLOC_PGTABLE_MAPPING
While I was doing zram testing, I found sometimes decompression failed
since the compression buffer was corrupted. With investigation, I found
below commit calls cond_resched unconditionally so it could make a
problem in atomic context if the task is reschedule.
BUG: sleeping function called from invalid context at mm/vmalloc.c:108
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog
3 locks held by memhog/946:
#0:
ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160
#1:
ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160
#2:
ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0
CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
unmap_kernel_range_noflush+0x2eb/0x350
unmap_kernel_range+0x14/0x30
zs_unmap_object+0xd5/0xe0
zram_bvec_rw.isra.0+0x38c/0x8e0
zram_rw_page+0x90/0x101
bdev_write_page+0x92/0xe0
__swap_writepage+0x94/0x4a0
pageout+0xe3/0x3a0
shrink_page_list+0xb94/0xd60
shrink_inactive_list+0x158/0x460
We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which
contains the offending calling code) from zsmalloc.
Even though this option showed some amount improvement(e.g., 30%) in
some arm32 platforms, it has been headache to maintain since it have
abused APIs[1](e.g., unmap_kernel_range in atomic context).
Since we are approaching to deprecate 32bit machines and already made
the config option available for only builtin build since v5.8, lastly it
has been not default option in zsmalloc, it's time to drop the option
for better maintenance.
[1] http://lore.kernel.org/linux-mm/
20201105170249.387069-1-minchan@kernel.org
Fixes:
e47110e90584 ("mm/vunmap: add cond_resched() in vunmap_pmd_range")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Harish Sriram <harish@linux.ibm.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Shi [Sun, 6 Dec 2020 06:14:48 +0000 (22:14 -0800)]
mm: list_lru: set shrinker map bit when child nr_items is not zero
When investigating a slab cache bloat problem, significant amount of
negative dentry cache was seen, but confusingly they neither got shrunk
by reclaimer (the host has very tight memory) nor be shrunk by dropping
cache. The vmcore shows there are over 14M negative dentry objects on
lru, but tracing result shows they were even not scanned at all.
Further investigation shows the memcg's vfs shrinker_map bit is not set.
So the reclaimer or dropping cache just skip calling vfs shrinker. So
we have to reboot the hosts to get the memory back.
I didn't manage to come up with a reproducer in test environment, and
the problem can't be reproduced after rebooting. But it seems there is
race between shrinker map bit clear and reparenting by code inspection.
The hypothesis is elaborated as below.
The memcg hierarchy on our production environment looks like:
root
/ \
system user
The main workloads are running under user slice's children, and it
creates and removes memcg frequently. So reparenting happens very often
under user slice, but no task is under user slice directly.
So with the frequent reparenting and tight memory pressure, the below
hypothetical race condition may happen:
CPU A CPU B
reparent
dst->nr_items == 0
shrinker:
total_objects == 0
add src->nr_items to dst
set_bit
return SHRINK_EMPTY
clear_bit
child memcg offline
replace child's kmemcg_id with
parent's (in memcg_offline_kmem())
list_lru_del() between shrinker runs
see parent's kmemcg_id
dec dst->nr_items
reparent again
dst->nr_items may go negative
due to concurrent list_lru_del()
The second run of shrinker:
read nr_items without any
synchronization, so it may
see intermediate negative
nr_items then total_objects
may return 0 coincidently
keep the bit cleared
dst->nr_items != 0
skip set_bit
add scr->nr_item to dst
After this point dst->nr_item may never go zero, so reparenting will not
set shrinker_map bit anymore. And since there is no task under user
slice directly, so no new object will be added to its lru to set the
shrinker map bit either. That bit is kept cleared forever.
How does list_lru_del() race with reparenting? It is because reparenting
replaces children's kmemcg_id to parent's without protecting from
nlru->lock, so list_lru_del() may see parent's kmemcg_id but actually
deleting items from child's lru, but dec'ing parent's nr_items, so the
parent's nr_items may go negative as commit
2788cf0c401c ("memcg:
reparent list_lrus and free kmemcg_id on css offline") says.
Since it is impossible that dst->nr_items goes negative and
src->nr_items goes zero at the same time, so it seems we could set the
shrinker map bit iff src->nr_items != 0. We could synchronize
list_lru_count_one() and reparenting with nlru->lock, but it seems
checking src->nr_items in reparenting is the simplest and avoids lock
contention.
Fixes:
fae91d6d8be5 ("mm/list_lru.c: set bit in memcg shrinker bitmap on first list_lru item appearance")
Suggested-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.19]
Link: https://lkml.kernel.org/r/20201202171749.264354-1-shy828301@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Sun, 6 Dec 2020 06:14:45 +0000 (22:14 -0800)]
mm: memcg/slab: fix obj_cgroup_charge() return value handling
Commit
10befea91b61 ("mm: memcg/slab: use a single set of kmem_caches
for all allocations") introduced a regression into the handling of the
obj_cgroup_charge() return value. If a non-zero value is returned
(indicating of exceeding one of memory.max limits), the allocation
should fail, instead of falling back to non-accounted mode.
To make the code more readable, move memcg_slab_pre_alloc_hook() and
memcg_slab_post_alloc_hook() calling conditions into bodies of these
hooks.
Fixes:
10befea91b61 ("mm: memcg/slab: use a single set of kmem_caches for all allocations")
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201127161828.GD840171@carbon.dhcp.thefacebook.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Menglong Dong [Sun, 6 Dec 2020 06:14:42 +0000 (22:14 -0800)]
coredump: fix core_pattern parse error
'format_corename()' will splite 'core_pattern' on spaces when it is in
pipe mode, and take helper_argv[0] as the path to usermode executable.
It works fine in most cases.
However, if there is a space between '|' and '/file/path', such as
'| /usr/lib/systemd/systemd-coredump %P %u %g', then helper_argv[0] will
be parsed as '', and users will get a 'Core dump to | disabled'.
It is not friendly to users, as the pattern above was valid previously.
Fix this by ignoring the spaces between '|' and '/file/path'.
Fixes:
315c69261dd3 ("coredump: split pipe command whitespace before expanding template")
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Wise <pabs3@bonedaddy.net>
Cc: Jakub Wilk <jwilk@jwilk.net> [https://bugs.debian.org/924398]
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/5fb62870.1c69fb81.8ef5d.af76@mx.google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sun, 6 Dec 2020 06:14:38 +0000 (22:14 -0800)]
zlib: export S390 symbols for zlib modules
Fix build errors when ZLIB_INFLATE=m and ZLIB_DEFLATE=m and ZLIB_DFLTCC=y
by exporting the 2 needed symbols in dfltcc_inflate.c.
Fixes these build errors:
ERROR: modpost: "dfltcc_inflate" [lib/zlib_inflate/zlib_inflate.ko] undefined!
ERROR: modpost: "dfltcc_can_inflate" [lib/zlib_inflate/zlib_inflate.ko] undefined!
Fixes:
126196100063 ("lib/zlib: add s390 hardware support for kernel zlib_inflate")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lkml.kernel.org/r/20201123191712.4882-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Thu, 3 Dec 2020 17:55:51 +0000 (02:55 +0900)]
kbuild: avoid split lines in .mod files
"xargs echo" is not a safe way to remove line breaks because the input
may exceed the command line limit and xargs may break it up into
multiple invocations of echo. This should never happen because
scripts/gen_autoksyms.sh expects all undefined symbols are placed in
the second line of .mod files.
One possible way is to replace "xargs echo" with
"sed ':x;N;$!bx;s/\n/ /g'" or something, but I rewrote the code by
using awk because it is more readable.
This issue was reported by Sami Tolvanen; in his Clang LTO patch set,
$(multi-used-m) is no longer an ELF object, but a thin archive that
contains LLVM bitcode files. llvm-nm prints out symbols for each
archive member separately, which results a lot of dupications, in some
places, beyond the system-defined limit.
This problem must be fixed irrespective of LTO, and we must ensure
zero possibility of having this issue.
Link: https://lkml.org/lkml/2020/12/1/1658
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Michael S. Tsirkin [Sat, 5 Dec 2020 19:38:46 +0000 (14:38 -0500)]
Revert "mei: virtio: virtualization frontend driver"
This reverts commit
d162219c655c8cf8003128a13840d6c1e183fb80.
The device uses a VIRTIO device ID out of a not-for-production range.
Releasing Linux using an ID out of this range will make it conflict with
development setups. An official request to reserve an ID for an MEI
device is yet to be submitted to the virtio TC, thus there's no chance
it will be reserved and fixed in time before the next release.
Once requested it usually takes 2-3 weeks to land in the spec, which
means the device can be supported with the official ID in the next Linux
version if contributors act quickly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Cc: Wang Yu <yu1.wang@intel.com>
Cc: Liu Shuo <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20201205193625.469773-1-mst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Thu, 3 Dec 2020 04:51:01 +0000 (13:51 +0900)]
x86/sev-es: Use new for_each_insn_prefix() macro to loop over prefixes bytes
Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper
check must be:
insn.prefixes.bytes[i] != 0 and i < 4
instead of using insn.prefixes.nbytes. Use the new
for_each_insn_prefix() macro which does it correctly.
Debugged by Kees Cook <keescook@chromium.org>.
[ bp: Massage commit message. ]
Fixes:
25189d08e516 ("x86/sev-es: Add support for handling IOIO exceptions")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/160697106089.3146288.2052422845039649176.stgit@devnote2
Masami Hiramatsu [Thu, 3 Dec 2020 04:50:50 +0000 (13:50 +0900)]
x86/insn-eval: Use new for_each_insn_prefix() macro to loop over prefixes bytes
Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be
insn.prefixes.bytes[i] != 0 and i < 4
instead of using insn.prefixes.nbytes. Use the new
for_each_insn_prefix() macro which does it correctly.
Debugged by Kees Cook <keescook@chromium.org>.
[ bp: Massage commit message. ]
Fixes:
32d0b95300db ("x86/insn-eval: Add utility functions to get segment selector")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160697104969.3146288.16329307586428270032.stgit@devnote2
Masami Hiramatsu [Thu, 3 Dec 2020 04:50:37 +0000 (13:50 +0900)]
x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytes
Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be
insn.prefixes.bytes[i] != 0 and i < 4
instead of using insn.prefixes.nbytes.
Introduce a for_each_insn_prefix() macro for this purpose. Debugged by
Kees Cook <keescook@chromium.org>.
[ bp: Massage commit message, sync with the respective header in tools/
and drop "we". ]
Fixes:
2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2
Linus Torvalds [Sun, 6 Dec 2020 00:16:34 +0000 (16:16 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A fix for 'RETRIGEN' handling in Atmel touch controllers that was
causing lost interrupts on systems using edge-triggered interrupts, a
quirk for i8042 driver, and a couple more fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: atmel_mxt_ts - fix lost interrupts
Input: xpad - support Ardwiino Controllers
Input: i8042 - add ByteSpeed touchpad to noloop table
Input: i8042 - fix error return code in i8042_setup_aux()
Input: soc_button_array - add missing include
Linus Torvalds [Sat, 5 Dec 2020 23:27:22 +0000 (15:27 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some more I2C driver updates. IMX updates are a tad bigger, but not
exceptionally big"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mlxbf: Fix the return check of devm_ioremap and ioremap
i2c: mlxbf: select CONFIG_I2C_SLAVE
i2c: imx: Don't generate STOP condition if arbitration has been lost
i2c: imx: Check for I2SR_IAL after every byte
i2c: imx: Fix reset of I2SR_IAL flag
i2c: qcom: Fix IRQ error misassignement
i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc()
Linus Torvalds [Sat, 5 Dec 2020 22:45:30 +0000 (14:45 -0800)]
Merge tag 'block-5.10-2020-12-05' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Single fix for an issue with chunk_sectors and stacked devices"
* tag 'block-5.10-2020-12-05' of git://git.kernel.dk/linux-block:
block: use gcd() to fix chunk_sectors limit stacking