drm/bochs: fix blanking

VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome
mode, note C vs. M at the end).  So when using VGA_IS1_RC make sure the
vga device is actually in color mode and set the corresponding bit in the
misc register.

Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2
fix is on the way too).  Doesn't happen in BIOS mode because in that
case the vgabios already flips the bit.

Fixes: 250e743915d4 ("drm/bochs: Add screen blanking support")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20220906142957.2763577-1-kraxel@redhat.com

drm/virtio: set fb_modifiers_not_supported

Without this, the drm core advertises LINEAR modifier which is
incorrect.

Also userspace virgl does not support modifiers.  For example, it causes
chrome on ozone/drm to fail with "Failed to create scanout buffer".

Fixes: 2af104290da5 ("drm: introduce fb_modifiers_not_supported flag in mode_config")
Suggested-by: Shao-Chuan Lee <shaochuan@chromium.org>
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220831190601.1295129-1-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/sun4i: tv: Add missing reset assertion

The reset line is deasserted at bind, and asserted if we ever encounter an
error there. However, it's never asserted in unbind which will lead to a
resource unbalance.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-40-459522d653a7@cerno.tech

drm/sun4i: tv: Rename error label

The other error labels in sun4i_tv_bind() are named after the task they
perform (err_disable_clk to call clk_disable_unprepare for example).

However, the err_cleanup_connector is named after the calling site
(drm_connector_init failing) and will actually cleanup the encoder. Let's
rename it to err_cleanup_encoder to be consistent.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-39-459522d653a7@cerno.tech

drm/sun4i: tv: Remove useless destroy function

Our destroy implementation is just calling the generic helper, so let's
just remove our function and directly use the helper.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-38-459522d653a7@cerno.tech

drm/sun4i: tv: Remove useless function

The drm_connector_to_sun4i_tv() function isn't used anywhere in the driver,
so let's remove it.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-37-459522d653a7@cerno.tech

drm/sun4i: tv: Convert to atomic hooks

The sun4i TV driver still uses legacy enable and disable hook
implementation. Let's convert to the atomic variants.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-35-459522d653a7@cerno.tech

drm/sun4i: tv: Remove unused mode_valid

The mode_valid implementation is pretty much a nop, let's remove it.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-34-459522d653a7@cerno.tech

drm/vc4: vec: Fix timings for VEC modes

This commit fixes vertical timings of the VEC (composite output) modes
to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R
standards.

Previous timings were actually defined as 502 and 601 lines, resulting
in non-standard 62.69 Hz and 52 Hz signals being generated,
respectively.

Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-28-459522d653a7@cerno.tech

drm/vc4: vec: Remove redundant atomic_mode_set

Let's remove the superfluous tv_mode field, which was redundant with the
mode field in struct drm_tv_connector_state.

Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-27-459522d653a7@cerno.tech

drm/vc4: vec: Refactor VEC TV mode setting

Change the mode_set function pointer logic to declarative config0,
config1 and custom_freq fields, to make TV mode setting logic more
concise and uniform.

Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
[Maxime: Fixed != 0 check, added tv_mode variable]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-26-459522d653a7@cerno.tech

drm/vc4: vec: Convert to atomic helpers

The VC4 VEC driver still uses legacy enable and disable hook
implementation. Let's convert to the atomic variants.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-25-459522d653a7@cerno.tech

drm/vc4: vec: Remove empty mode_fixup

The mode_fixup hooks are deprecated, and the behaviour we implement is the
default one anyway. Let's remove it.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728-rpi-analog-tv-properties-v2-24-459522d653a7@cerno.tech

drm/ttm: Remove unnecessary '0' values from ret

The variable ret is assigned in the judgment branch statement, he does
not need to initialize the assignment.

Signed-off-by: Li zeming <zeming@nfschina.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907032934.4490-1-zeming@nfschina.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/via: Add new condition to via_dma_cleanup()

Pointer dev_priv->mmio, which was checked for NULL at via_do_init_map(),
is passed to via_do_cleanup_map() and is dereferenced there without check.

The patch adds the condition in via_dma_cleanup() which prevents potential NULL
pointer dereference.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 22f579c621e2 ("drm: Add via unichrome support")
Signed-off-by: Alisa Khabibrakhmanova <khabibrakhmanova@ispras.ru>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729090643.240778-1-khabibrakhmanova@ispras.ru

drm/panel-edp: Fix typo in kerneldoc comment (appers=>appears)

Ever since I got the spell-check working in my editor this one has
been bugging me. Fix it.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720162314.1.Ieef5bc3848df40b71605b70bb571d6429e8978de@changeid

drm/scheduler: quieten kernel-doc warnings

Fix kernel-doc warnings in gpu_scheduler.h and sched_main.c.

Quashes these warnings:

include/drm/gpu_scheduler.h:332: warning: missing initial short description on line:
 * struct drm_sched_backend_ops
include/drm/gpu_scheduler.h:412: warning: missing initial short description on line:
 * struct drm_gpu_scheduler
include/drm/gpu_scheduler.h:461: warning: Function parameter or member 'dev' not described in 'drm_gpu_scheduler'

drivers/gpu/drm/scheduler/sched_main.c:201: warning: missing initial short description on line:
 * drm_sched_dependency_optimized
drivers/gpu/drm/scheduler/sched_main.c:995: warning: Function parameter or member 'dev' not described in 'drm_sched_init'

Fixes: 2d33948e4e00 ("drm/scheduler: add documentation")
Fixes: 8ab62eda177b ("drm/sched: Add device pointer to drm_gpu_scheduler")
Fixes: 542cff7893a3 ("drm/sched: Avoid lockdep spalt on killing a processes")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Jiawei Gu <Jiawei.Gu@amd.com>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220404213040.12912-1-rdunlap@infradead.org

drm/bridge: anx7625: Set HPD irq detect window to 2ms

Some panels trigger HPD irq due to noise, the HPD debounce
may be 1.8ms, exceeding the default irq detect window, ~1.4ms.
This patch set HPD irq detection window to 2ms to
tolerate the HPD noise.

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220903130833.541463-1-xji@analogixsemi.com

drm: vkms: Add support to the RGB565 format

This commit also adds new helper macros to deal with fixed-point
arithmetic.

It was done to improve the precision of the conversion to ARGB16161616
since the "conversion ratio" is not an integer.

V3: Adapt the handlers to the new format introduced in patch 7 V3.
V5: Minor improvements
V6: Minor improvements (Pekka Paalanen)

Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-10-igormtorrente@gmail.com

drm: vkms: Adds XRGB_16161616 and ARGB_1616161616 formats

This will be useful to write tests that depends on these formats.

ARGB and XRGB follows the a similar implementation of the former formats.
Just adjusting for 16 bits per channel.

V3: Adapt the handlers to the new format introduced in patch 7 V3.
V5: Minor improvements
    Added le16_to_cpu/cpu_to_le16 to the 16 bits color read/writes.

Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-9-igormtorrente@gmail.com

drm: vkms: Supports to the case where primary plane doesn't match the CRTC

We will remove the current assumption that the primary plane has the
same size and position as CRTC and that the primary plane is the
bottom-most in zpos order, or is even enabled. At least as far
as the blending machinery is concerned.

For that we will add CRTC dimension information to `vkms_crtc_state`
and add a opaque black backgound color.

Because now we need to fill the background, we had a loss in
performance with this change. Results running the IGT[1] test
`igt@kms_cursor_crc@pipe-a-cursor-512x512-onscreen` ten times:

|                  Frametime                   |
|:--------------------------------------------:|
|  Implementation |  Previous |   This commit  |
|:---------------:|:---------:|:--------------:|
| frametime range |  5~18 ms  |     10~22 ms   |
|     Average     |  8.47 ms  |     12.32 ms   |

[1] IGT commit id: bc3f6833a12221a46659535dac06ebb312490eb4

V6: Improve the commit description (Pekka Paalanen).
    Update some comments (Pekka Paalanen).
    Remove some fields from `vkms_crtc_state` and move where
    some variables are set (Pekka Paalanen).

Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-8-igormtorrente@gmail.com

drm: vkms: Refactor the plane composer to accept new formats

Currently the blend function only accepts XRGB_8888 and ARGB_8888
as a color input.

This patch refactors all the functions related to the plane composition
to overcome this limitation.

The pixels blend is done using the new internal format. And new handlers
are being added to convert a specific format to/from this internal format.

So the blend operation depends on these handlers to convert to this common
format. The blended result, if necessary, is converted to the writeback
buffer format.

This patch introduces three major differences to the blend function.
1 - All the planes are blended at once.
2 - The blend calculus is done as per line instead of per pixel.
3 - It is responsible to calculates the CRC and writing the writeback
buffer(if necessary).

These changes allow us to allocate way less memory in the intermediate
buffer to compute these operations. Because now we don't need to
have the entire intermediate image lines at once, just one line is
enough.

| Memory consumption (output dimensions) |
|:--------------------------------------:|
|       Current      |     This patch    |
|:------------------:|:-----------------:|
|   Width * Heigth   |     2 * Width     |

Beyond memory, we also have a minor performance benefit from all
these changes. Results running the IGT[1] test
`igt@kms_cursor_crc@pipe-a-cursor-512x512-onscreen` ten times:

|                 Frametime                  |
|:------------------------------------------:|
|  Implementation |  Current  |  This commit |
|:---------------:|:---------:|:------------:|
| frametime range |  9~22 ms  |    5~17 ms   |
|     Average     |  11.4 ms  |    7.8 ms    |

[1] IGT commit id: bc3f6833a12221a46659535dac06ebb312490eb4

V2: Improves the performance drastically, by performing the operations
    per-line and not per-pixel(Pekka Paalanen).
    Minor improvements(Pekka Paalanen).
V3: Changes the code to blend the planes all at once. This improves
    performance, memory consumption, and removes much of the weirdness
    of the V2(Pekka Paalanen and me).
    Minor improvements(Pekka Paalanen and me).
V4: Rebase the code and adapt it to the new NUM_OVERLAY_PLANES constant.
V5: Minor checkpatch fixes and the removal of TO-DO item(Melissa Wen).
    Several security/robustness improvents(Pekka Paalanen).
    Removes check_planes_x_bounds function and allows partial
    partly off-screen(Pekka Paalanen).
V6: Fix a mismatch of some variable sizes (Pekka Paalanen).
    Several minor improvements (Pekka Paalanen).

Reviewed-by: Melissa Wen <mwen@igalia.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-7-igormtorrente@gmail.com

drm: vkms: Add fb information to `vkms_writeback_job`

This commit is the groundwork to introduce new formats to the planes and
writeback buffer. As part of it, a new buffer metadata field is added to
`vkms_writeback_job`, this metadata is represented by the `vkms_frame_info`
struct.

Also adds two new function pointers (`line_to_frame_func` and
`frame_to_line_func`) are defined to handle format conversion
from/to internal format.

A new internal format(`struct pixel_argb_u16`) is introduced to deal with
all possible inputs. It consists of 16 bits fields that represent each of
the channels.

These things will allow us, in the future, to have different compositing
and wb format types.

V2: Change the code to get the drm_framebuffer reference and not copy its
    contents (Thomas Zimmermann).
V3: Drop the refcount in the wb code (Thomas Zimmermann).
V5: Add {wb,plane}_format_transform_func to vkms_writeback_job
    and vkms_plane_state (Pekka Paalanen)
V6: Improvements to some struct/struct members names (Pekka Paalanen).
    Splits this patch in two (Pekka Paalanen).
V7: Replace line_to_frame_func and frame_to_line_func typedefs
   with the function signature and void* (Melissa Wen).

Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-6-igormtorrente@gmail.com

drm: vkms: get the reference to `drm_framebuffer` instead if coping it

Instead of coping `drm_framebuffer` - which can cause problems -
we just get the reference and add the ref count.

Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-5-igormtorrente@gmail.com

drm: drm_atomic_helper: Add a new helper to deal with the writeback connector validation

Add a helper function to validate the connector configuration received in
the encoder atomic_check by the drivers.

So the drivers don't need to do these common validations themselves.

V2: Move the format verification to a new helper at the drm_atomic_helper.c
    (Thomas Zimmermann).
V3: Format check improvements (Leandro Ribeiro).
    Minor improvements(Thomas Zimmermann).
V5: Fix some grammar issues in the commit message (André Almeida).

Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-4-igormtorrente@gmail.com

drm: vkms: Rename `vkms_composer` to `vkms_frame_info`

Changes the name of this struct to a more meaningful name.
A name that represents better what this struct is about.

Composer is the code that do the compositing of the planes.
This struct contains information on the frame used in the output
composition. Thus, vkms_frame_info is a better name to represent
this.

V5: Fix a commit message typo(Melissa Wen).
V6: Fix wrong iosys_map_is_null verification at compose_plane
    (Melissa Wen).

Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-3-igormtorrente@gmail.com

drm: vkms: Replace hardcoded value of `vkms_composer.map` to DRM_FORMAT_MAX_PLANES

The `map` vector at `vkms_composer` uses a hardcoded value to define its
size.

If someday the maximum number of planes increases, this hardcoded value
can be a problem.

This value is being replaced with the DRM_FORMAT_MAX_PLANES macro.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-2-igormtorrente@gmail.com

drm/atomic-helper: log EINVAL cause in drm_atomic_helper_async_check()

This can help figure out why the kernel returns EINVAL from
user-space.

v2: add missing newlines

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220829151451.152114-2-contact@emersion.fr

drm/atomic-helper: print message on driver connector check failure

Sometimes drivers are missing logs when they return EINVAL.
Printing the failure here in common code can help understand where
EINVAL is coming from.

All other atomic_check() calls in this file already have similar
logging.

v2: add missing newlines

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220829151451.152114-1-contact@emersion.fr

drm: hide unregistered connectors from GETCONNECTOR IOCTL

When registering a connector, the kernel sends a hotplug uevent in
drm_connector_register(). When unregistering a connector, drivers
are expected to send a uevent as well. However, user-space has no way
to figure out that the connector isn't registered anymore: it'll still
be reported in GETCONNECTOR IOCTLs.

The documentation for DRM_CONNECTOR_UNREGISTERED states:

> The connector […] has since been unregistered and removed from
> userspace, or the connector was unregistered before it had a chance
> to be exposed to userspace

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801133754.461037-1-contact@emersion.fr

drm/mediatek: dp: Audio support for MT8195

This patch adds audio support to the DP driver for MT8195 with up to 8
channels.

Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-11-rex-bc.chen@mediatek.com

drm/mediatek: dp: Add hpd debounce

From the DP spec 1.4a chapter 3.3, upstream devices should implement
HPD signal de-bouncing on an external connection.
A period of 100ms should be used to detect an HPD connect event.
To cover these cases, HPD de-bounce should be implemented only after
HPD low has been detected for at least 100ms.

Therefore,
1. If HPD is low (which means plugging out) for longer than 100ms:
   we need to do de-bouncing (which means we need to wait for 100ms).
2. If HPD low is for less than 100ms:
   we don't need to care about the de-bouncing.

In this patch, we start a 100ms timer and use a need_debounce boolean
to implement the feature.

Two cases when HPD is high:
1. If the timer is expired (>100ms):
   - need_debounce is true.
   - When HPD high (plugging event comes), need_debounce will be true
     and then we need to do de-bouncing (wait for 100ms).
2. If the timer is not expired (<100ms):
   - need_debounce is false.
   - When HPD high (plugging event comes), need_debounce will be false
     and no need to do de-bouncing.

HPD_______             __________________
          |            |<-  100ms   ->
          |____________|
          <-  100ms   ->

Without HPD de-bouncing, USB-C to HDMI Adapaters will not be detected.

The change has been successfully tested with the following devices:
- Dell Adapter - USB-C to HDMI
- Acer 1in1 HDMI dongle
- Ugreen 1in1 HDMI dongle
- innowatt HDMI + USB3 hub
- Acer 2in1 HDMI dongle
- Apple 3in1 HDMI dongle (A2119)
- J5Create 3in1 HDMI dongle (JAC379)

Tested-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-10-rex-bc.chen@mediatek.com

drm/mediatek: dp: Add MT8195 External DisplayPort support

Add External DisplayPort support to the MT8195 eDP driver.

Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-9-rex-bc.chen@mediatek.com

drm/mediatek: dp: Determine device of next_bridge

It's not necessary to have a next_bridge for DP device, so we add this
patch to judge this.

Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-8-rex-bc.chen@mediatek.com

drm/mediatek: dp: Add multiple calibration data formats support

The calibration data formats of eDP and DP are different. We add
"const struct mtk_dp_efuse_fmt *efuse_fmt" to the device data to
define them.

Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-7-rex-bc.chen@mediatek.com

drm/mediatek: dp: Add multiple smc commands support

The smc commands of eDP and DP are different. We add smc_cmd to the
device data to define them.

Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-6-rex-bc.chen@mediatek.com

drm/mediatek: dp: Add multiple bridge types support

The bridge types of eDP and DP are different. We add device data to
this driver and add bridge_type to the device data to define them.

Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-5-rex-bc.chen@mediatek.com

drm/mediatek: Add MT8195 Embedded DisplayPort driver

This patch adds a embedded displayport driver for the MediaTek mt8195 SoC.

It supports the MT8195, the embedded DisplayPort units. It offers
DisplayPort 1.4 with up to 4 lanes.

The driver creates a child device for the phy. The child device will
never exist without the parent being active. As they are sharing a
register range, the parent passes a regmap pointer to the child so that
both can work with the same register range. The phy driver sets device
data that is read by the parent to get the phy device that can be used
to control the phy properties.

This driver is based on an initial version by
Jitao shi <jitao.shi@mediatek.com>

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-4-rex-bc.chen@mediatek.com

video/hdmi: Add audio_infoframe packing for DP

Similar to HDMI, DP uses audio infoframes as well which are structured
very similar to the HDMI ones.

This patch adds a helper function to pack the HDMI audio infoframe for
DP, called hdmi_audio_infoframe_pack_for_dp().
hdmi_audio_infoframe_pack_only() is split into two parts. One of them
packs the payload only and can be used for HDMI and DP.

Also constify the frame parameter in hdmi_audio_infoframe_check() as
it is passed to hdmi_audio_infoframe_check_only() which expects a const.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-3-rex-bc.chen@mediatek.com

dt-bindings: mediatek,dp: Add Display Port binding

This controller is present on several mediatek hardware. Currently
mt8195 and mt8395 have this controller without a functional difference,
so only one compatible field is added.

The controller can have two forms, as a normal display port and as an
embedded display port.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-2-rex-bc.chen@mediatek.com

drm/bridge: chrontel-ch7033: Add byteswap order setting

Add the option to set the byteswap order in the devicetree. For the
official HDMI DIP for the NTC CHIP the byteswap order needs to be
RGB, however the driver sets it as BGR. With this patch the driver
will remain at BGR unless manually specified via devicetree.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902153906.31000-3-macroalpha82@gmail.com

dt-bindings: Add byteswap order to chrontel ch7033

Update dt-binding documentation to add support for setting byteswap of
chrontel ch7033.

New property name of chrontel,byteswap added to set the byteswap order.
This property is optional.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902153906.31000-2-macroalpha82@gmail.com

drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP

Implement the bridge connector-related .get_edid() and .detect()
operations for full DP mode, and report the related bridge capabilities
and type.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-4-tomi.valkeinen@ideasonboard.com

drm/bridge: ti-sn65dsi86: Support DisplayPort (non-eDP) mode

Despite the SN65DSI86 being an eDP bridge, on some systems its output is
routed to a DisplayPort connector. Enable DisplayPort mode when the next
component in the display pipeline is detected as a DisplayPort
connector, and disable eDP features in that case.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reworked to set bridge type based on the next bridge/connector.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
--
Changes since v1/RFC:
 - Rebased on top of "drm/bridge: ti-sn65dsi86: switch to
   devm_drm_of_get_bridge"
 - eDP/DP mode determined from the next bridge connector type.

Changes since v2:
 - Remove setting of Standard DP Scrambler Seed. (It's read-only).
 - Prevent setting DP_EDP_CONFIGURATION_SET in
   ti_sn_bridge_atomic_enable()
 - Use Doug's suggested text for disabling ASSR on DP mode.

Changes since v3:
 - Remove ASSR_CONTROL definition

Changes since v4:
 - Refactor code to configure the DP/eDP scrambler in one place.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-3-tomi.valkeinen@ideasonboard.com

drm/bridge: ti-sn65dsi86: Reject modes with too large blanking

The front and back porch registers are 8 bits, and pulse width registers
are 15 bits, so reject any modes with larger periods.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831082653.20449-2-tomi.valkeinen@ideasonboard.com

drm/i915/dp_mst: Fix mst_mgr lookup during atomic check

If an MST connector was disabled in the old state during a commit, the
connector's best_encoder will be NULL, so we can't look up mst_mgr via
it. Do the lookup instead via intel_connector->mst_port which always
points to the primary encoder.

This fixes the following:
[   58.922866] BUG: kernel NULL pointer dereference, address: 0000000000000170
[   58.922867] #PF: supervisor read access in kernel mode
[   58.922868] #PF: error_code(0x0000) - not-present page
[   58.922869] PGD 0 P4D 0
[   58.922870] Oops: 0000 [#1] PREEMPT SMP NOPTI
[   58.922872] CPU: 0 PID: 133 Comm: kworker/0:2 Tainted: G     U             6.0.0-rc3-imre+ #560
[   58.922874] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3135.A00.2203251419 03/25/2022
[   58.922874] Workqueue: events output_poll_execute [drm_kms_helper]
[   58.922879] RIP: 0010:intel_dp_mst_atomic_check+0xbb/0x1c0 [i915]
[   58.922955] Code: 5b 7b f6 ff 84 c0 75 41 48 8b 44 24 18 65 48 2b 04 25 28 00 00 00 0f 85 ff 00 00 00 48 8b 45 10 48 8b 93 10 07 00 00 4c 89 e7 <48> 8b b0 70 01 00 00 48 83 c4 20 5b 5d 48 81 c6 f0 0c 00 00 41 5c
[   58.922956] RSP: 0018:ffffc90000633a88 EFLAGS: 00010246
[   58.922957] RAX: 0000000000000000 RBX: ffff888117d19000 RCX: ffff888101893308
[   58.922958] RDX: ffff888122981000 RSI: ffffffff82309ecc RDI: ffff888114da6800
[   58.922959] RBP: ffff8881094bab48 R08: 0000000081917436 R09: 0000000068191743
[   58.922960] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888114da6800
[   58.922960] R13: ffff8881143f8000 R14: 0000000000000000 R15: ffff888119bf2000
[   58.922961] FS:  0000000000000000(0000) GS:ffff888496200000(0000) knlGS:0000000000000000
[   58.922962] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   58.922962] CR2: 0000000000000170 CR3: 0000000005612004 CR4: 0000000000770ef0
[   58.922963] PKRU: 55555554
[   58.922963] Call Trace:
[   58.922964]  <TASK>
[   58.922966]  drm_atomic_helper_check_modeset+0x3f8/0xc70 [drm_kms_helper]
[   58.922972]  intel_atomic_check+0xb1/0x3180 [i915]
[   58.923059]  ? find_held_lock+0x2b/0x80
[   58.923064]  drm_atomic_check_only+0x5d3/0xa60 [drm]
[   58.923082]  drm_atomic_commit+0x56/0xc0 [drm]
[   58.923097]  ? drm_plane_get_damage_clips.cold+0x1c/0x1c [drm]
[   58.923114]  drm_client_modeset_commit_atomic+0x235/0x280 [drm]
[   58.923132]  drm_client_modeset_commit_locked+0x5b/0x190 [drm]
[   58.923148]  drm_client_modeset_commit+0x24/0x50 [drm]
[   58.923164]  drm_fb_helper_set_par+0xae/0xe0 [drm_kms_helper]
[   58.923171]  drm_fb_helper_hotplug_event+0xd5/0xf0 [drm_kms_helper]
[   58.923178]  output_poll_execute+0xac/0x200 [drm_kms_helper]
[   58.923187]  process_one_work+0x268/0x580
[   58.923190]  ? process_one_work+0x580/0x580
[   58.923191]  worker_thread+0x52/0x3b0
[   58.923193]  ? process_one_work+0x580/0x580
[   58.923195]  kthread+0xf0/0x120
[   58.923196]  ? kthread_complete_and_exit+0x20/0x20
[   58.923198]  ret_from_fork+0x1f/0x30
[   58.923202]  </TASK>

Fixes: ffac9721939d ("drm/display/dp_mst: Don't open code modeset checks for releasing time slots")
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901161933.1004778-1-imre.deak@intel.com

drm/cmdline-parser: Use assert when needed

Expecting to observe a specific value, when the function responsible for
setting the value has failed will lead to extra noise in test output.
Use assert when the situation calls for it.
Also - very small tidying up around the changed areas (whitespace).

v2: Leave out the locals (drm_connector is huge) (lkp)

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817211236.252091-2-michal.winiarski@intel.com

drm/cmdline-parser: Merge negative tests

Negative tests can be expressed as a single parameterized test case,
which highlights that we're following the same test logic (passing
invalid cmdline and expecting drm_mode_parse_command_line_for_connector
to fail), which improves readability.

v2: s/negative/invalid to be consistent with other testcases in DRM

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817211236.252091-1-michal.winiarski@intel.com

gpu/drm/bridge/cadence: avoid flush_scheduled_work() usage

Like commit c4f135d643823a86 ("workqueue: Wrap flush_workqueue() using a
macro") says, flush_scheduled_work() is dangerous and will be forbidden.
We are on the way for removing all flush_scheduled_work() callers from
the kernel, and this patch is for removing flush_scheduled_work() call
 from cadence driver.

Since cdns-mhdp8546 driver uses 4 works

  mhdp->modeset_retry_work
  mhdp->hpd_work
  mhdp->hdcp.check_work
  mhdp->hdcp.prop_work

I assume that flush_scheduled_work() in cdns_mhdp_remove() needs to wait
for only these 4 works.

Since mhdp->modeset_retry_work already uses cancel_work_sync(), I assume
that flush_scheduled_work() needs to wait for only 3 works. But I came to
wonder whether mhdp->hdcp.check_work should be flushed or cancelled.

While flush_scheduled_work() waits for completion of works which were
already queued to system_wq, mhdp->hdcp.check_work is a delayed work.
That is, this work won't be queued to system_wq unless timeout expires.

Current code will wait for mhdp->hdcp.check_work only if timeout already
expired. If timeout is not expired yet, flush_scheduled_work() will fail
to cancel mhdp->hdcp.check_work, and cdns_mhdp_hdcp_check_work() which is
triggered by mhdp->hdcp.check_work will schedule hdcp->check_work, which
is too late for flush_scheduled_work() to wait for completion of
cdns_mhdp_hdcp_prop_work().

But since I couldn't get comments on how do we want to handle this race
window [1], this patch chose "do nothing" for mhdp->hdcp.check_work and
mhdp->hdcp.prop_work. That is, I assume that flush_scheduled_work() in
cdns_mhdp_remove() needs to wait for only mhdp->hpd_work work.

Link: https://lkml.kernel.org/r/943273cb-c2ec-24e3-5edb-64eacc6e2d30@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/216591bc-28bb-0453-10bb-59e268dff540@I-love.SAKURA.ne.jp

drm/panfrost: Update io-pgtable API

Convert to io-pgtable's bulk {map,unmap}_pages() APIs, to help the old
single-page interfaces eventually go away. Unmapping heap BOs still
wants to be done a page at a time, but everything else can get the full
benefit of the more efficient interface.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/daef7f8c134d989c55636a5790d8c0fcaca1bae3.1661205687.git.robin.murphy@arm.com

MAINTAINERS: Add myself as a reviewer for panel-edp.c

panel-edp changes go through the drm-misc tree (as per the "DRM PANEL
DRIVERS" entry in MAINTAINERS), but ever since splitting panel-edp out
of panel-simple I've been trying to keep a close eye on it. Make that
official by listing me as a reviewer.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822105340.1.I66a9a5577f9b0af66492ef13c47bc78ed85e5d6b@changeid

drm/bridge: it6505: Fix the order of DP_SET_POWER commands

Send DP_SET_POWER_D3 command to the downstream before stopping DP, so the
suspend process will not be interrupted by the HPD interrupt. Also modify
the order in .atomic_enable callback to make the callbacks symmetric.

Fixes: 46ca7da7f1e8 ("drm/bridge: it6505: Send DPCD SET_POWER to downstream")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830045756.1655954-1-treapking@chromium.org

drm/bridge: megachips: Fix a null pointer dereference bug

When removing the module we will get the following warning:

[   31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered
[   31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
[   31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[   31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130
[   31.921825] Call Trace:
[   31.922533]  stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw]
[   31.923139]  i2c_device_remove+0x181/0x1f0

The two bridges (stdp2690, stdp4028) do not probe at the same time, so
the driver does not call ge_b850v3_resgiter() when probing, causing the
driver to try to remove the object that has not been initialized.

Fix this by checking whether both the bridges are probed.

Fixes: 11632d4aa2b3 ("drm/bridge: megachips: Ensure both bridges are probed before registration")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830073450.1897020-1-zheyuma97@gmail.com

drm/dp: add drm_dp_phy_name() for getting DP PHY name

Add a helper for getting the DP PHY name. In the interest of caller
simplicity and to avoid allocations and passing in of buffers, duplicate
the const strings to return. It's a minor penalty to pay for simplicity
in all the call sites.

v2: Rebase, add kernel-doc, ensure non-NULL always

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b08dc12a7e621a48ec35546d6cd1ed4b1434810d.1660553850.git.jani.nikula@intel.com

drm/bridge: ps8640: Add double reset T4 and T5 to power-on sequence

The double reset power-on sequence is a workaround for the hardware
flaw in some chip that SPI Clock output glitch and cause internal MPU
unable to read firmware correctly. The sequence is suggested in ps8640
application note.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rock Chiu <rock.chiu@paradetech.corp-partner.google.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220815093905.134164-1-hsinyi@chromium.org

drm: bridge: dw_hdmi: only trigger hotplug event on link change

There are two events that signal a real change of the link state: HPD going
high means the sink is newly connected or wants the source to re-read the
EDID, RX sense going low is a indication that the link has been disconnected.

Ignore the other two events that also trigger interrupts, but don't need
immediate attention: HPD going low does not necessarily mean the link has
been lost and should not trigger a immediate read of the status. RX sense
going high also does not require a detect cycle, as HPD going high is the
right point in time to read the EDID.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v1)
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826185733.3213248-1-l.stach@pengutronix.de

drm/bridge: lvds-codec: Fix error checking of drm_of_lvds_get_data_mapping()

The drm_of_lvds_get_data_mapping() returns either negative value on
error or MEDIA_BUS_FMT_* otherwise. The check for 'ret' would also
catch the positive case of MEDIA_BUS_FMT_* and lead to probe failure
every time 'data-mapping' DT property is specified.

Fixes: 7c4dd0a266527 ("drm: of: Add drm_of_lvds_get_data_mapping")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801125419.167562-1-marex@denx.de

drm/bridge: tc358767: Handle bridge past DPI output

Currently the driver only handles panel directly connected to the DPI output.
Handle the case where a bridge is connected past DPI output of this bridge.
This could be e.g. DPI to LVDS encoder chip.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220724224317.288727-1-marex@denx.de

drm/bridge: anx7625: Support HDMI_I2S audio format

1. Support HDMI_I2S audio format.
2. Return 0 if there is no sink connection in .hw_param callback.

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Acked-by: Hsin-Yi Wang <hsinyi@chromium.org>
Acked-by: Jiaxin Yu<jiaxin.yu@mediatek.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726033058.403715-1-xji@analogixsemi.com

drm/gma500: Fix comment typo

The double `the' is duplicated in the comment, remove one.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804114751.46714-1-wangborong@cdjrlc.com

drm/gma500: Fix SDVO command debug printing

At some point the DRM printers started adding a newline after each
print. This caused SDVO command debug printing to look weird. Fix this
by using snprintf to print into a buffer which can be printed as a whole
by DRM_DEBUG_KMS(). Code is heavily inspired by i915.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610130925.8650-1-patrik.r.jakobsson@gmail.com

drm/tve200: Fix smatch warning

The "ret" variable is ambiguously returning something that
could be zero in the tve200_modeset_init() function, assign
it an explicit error return code to make this unambiguous.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505215019.2332613-1-linus.walleij@linaro.org

drm: bridge: icn6211: Add support for external REFCLK

The ICN6211 is capable of deriving its internal PLL clock from either
MIPI DSI HS clock, external REFCLK clock, or even internal oscillator.
Currently supported is only the first option. Add support for external
REFCLK clock input in addition to that.

There is little difference between these options, except that in case
of MIPI DSI HS clock input, the HS clock are pre-divided by a fixed /4
divider before being fed to the PLL input, while in case of external
REFCLK, the RECLK clock are fed directly into the PLL input.

Per exceptionally poor documentation, the REFCLK must be in range of
10..154 MHz.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801131747.183041-2-marex@denx.de

dt-bindings: display: bridge: icn6211: Add support for external REFCLK

The ICN6211 is capable of deriving its internal PLL clock from either
MIPI DSI HS clock, external REFCLK clock, or even internal oscillator.
Currently supported is only the first option. Document support for
external REFCLK clock input in addition to that.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801131747.183041-1-marex@denx.de

drm: bridge: icn6211: Add and use hs_rate and lp_rate

Fill in hs_rate and lp_rate to struct mipi_dsi_device for this bridge and
adjust DSI input frequency calculations such that they expect the DSI host
to configure HS clock according to hs_rate.

This is an optimization for the DSI burst mode case. In case the DSI device
supports DSI burst mode, it is recommended to operate the DSI interface at
the highest possible HS clock frequency which the DSI device supports. This
permits the DSI host to send as short as possible bursts of data on the DSI
link and keep the DSI data lanes in LP mode otherwise, which reduces power
consumption.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801131555.182969-1-marex@denx.de

drm: fix drm_mipi_dbi build errors

drm_mipi_dbi needs lots of DRM_KMS_HELPER support, so select
that Kconfig symbol like it is done is most other uses, and
the way that it was before MIPS_DBI was moved from tinydrm
to its core location.

Fixes these build errors:

ld: drivers/gpu/drm/drm_mipi_dbi.o: in function `mipi_dbi_buf_copy':
drivers/gpu/drm/drm_mipi_dbi.c:205: undefined reference to `drm_gem_fb_get_obj'
ld: drivers/gpu/drm/drm_mipi_dbi.c:211: undefined reference to `drm_gem_fb_begin_cpu_access'
ld: drivers/gpu/drm/drm_mipi_dbi.c:215: undefined reference to `drm_gem_fb_vmap'
ld: drivers/gpu/drm/drm_mipi_dbi.c:222: undefined reference to `drm_fb_swab'
ld: drivers/gpu/drm/drm_mipi_dbi.c:224: undefined reference to `drm_fb_memcpy'
ld: drivers/gpu/drm/drm_mipi_dbi.c:227: undefined reference to `drm_fb_xrgb8888_to_rgb565'
ld: drivers/gpu/drm/drm_mipi_dbi.c:235: undefined reference to `drm_gem_fb_vunmap'
ld: drivers/gpu/drm/drm_mipi_dbi.c:237: undefined reference to `drm_gem_fb_end_cpu_access'
ld: drivers/gpu/drm/drm_mipi_dbi.o: in function `mipi_dbi_dev_init_with_formats':
ld: drivers/gpu/drm/drm_mipi_dbi.o:/X64/../drivers/gpu/drm/drm_mipi_dbi.c:469: undefined reference to `drm_gem_fb_create_with_dirty'

Fixes: 174102f4de23 ("drm/tinydrm: Move mipi-dbi")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Dillon Min <dillon.minfei@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823004243.11596-1-rdunlap@infradead.org

drm/panel: use 'select' for Ili9341 panel driver helpers

Use 'select' instead of 'depends on' for DRM helpers for the
Ilitek ILI9341 panel driver.
This is what is done in the vast majority of other cases and
this makes it possible to fix a build error with drm_mipi_dbi.

Fixes: 5a04227326b0 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dillon Min <dillon.minfei@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823004227.10820-1-rdunlap@infradead.org

drm/virtio: Fix same-context optimization

When VIRTGPU_EXECBUF_RING_IDX is used, we should be considering the
timeline that the EB if running on rather than the global driver fence
context.

Fixes: 85c83ea915ed ("drm/virtio: implement context init: allocate an array of fence contexts")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20220812224001.2806463-1-robdclark@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

udmabuf: Set ubuf->sg = NULL if the creation of sg table fails

When userspace tries to map the dmabuf and if for some reason
(e.g. OOM) the creation of the sg table fails, ubuf->sg needs to be
set to NULL. Otherwise, when the userspace subsequently closes the
dmabuf fd, we'd try to erroneously free the invalid sg table from
release_udmabuf resulting in the following crash reported by syzbot:

general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 3609 Comm: syz-executor487 Not tainted
5.19.0-syzkaller-13930-g7ebfc85e2cd7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 07/22/2022
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 04 00 00 48 8d 7d 0c 4c
8b 63 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14
02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 e2
RSP: 0018:ffffc900037efd30 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffffff8cb67800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff84ad27e0 RDI: 0000000000000000
RBP: fffffffffffffff4 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 000000000008c07c R12: ffff88801fa05000
R13: ffff888073db07e8 R14: ffff888025c25440 R15: 0000000000000000
FS:  0000555555fc4300(0000) GS:ffff8880b9a00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc1c0ce06e4 CR3: 00000000715e6000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 dma_buf_release+0x157/0x2d0 drivers/dma-buf/dma-buf.c:78
 __dentry_kill+0x42b/0x640 fs/dcache.c:612
 dentry_kill fs/dcache.c:733 [inline]
 dput+0x806/0xdb0 fs/dcache.c:913
 __fput+0x39c/0x9d0 fs/file_table.c:333
 task_work_run+0xdd/0x1a0 kernel/task_work.c:177
 ptrace_notify+0x114/0x140 kernel/signal.c:2353
 ptrace_report_syscall include/linux/ptrace.h:420 [inline]
 ptrace_report_syscall_exit include/linux/ptrace.h:482 [inline]
 syscall_exit_work kernel/entry/common.c:249 [inline]
 syscall_exit_to_user_mode_prepare+0x129/0x280 kernel/entry/common.c:276
 __syscall_exit_to_user_mode_work kernel/entry/common.c:281 [inline]
 syscall_exit_to_user_mode+0x9/0x50 kernel/entry/common.c:294
 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fc1c0c35b6b
Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24
0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44
RSP: 002b:00007ffd78a06090 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1c0c35b6b
RDX: 0000000020000280 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 0000000000000007 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000000c
R13: 0000000000000003 R14: 00007fc1c0cfe4a0 R15: 00007ffd78a06140
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114

Reported-by: syzbot+c80e9ef5d8bb45894db0@syzkaller.appspotmail.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220825063522.801264-1-vivek.kasireddy@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/vc4: hvs: protect drm_print_regset32()

In vc4_hvs_dump_state() potentially freed resources are protected from
being accessed with drm_dev_enter()/drm_dev_exit().

Also include drm_print_regset32() in the protected section, since
drm_print_regset32() does access memory that is typically mapped via
devm_* calls.

Fixes: 969cfae1f01d ("drm/vc4: hvs: Protect device resources after removal")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-5-dakr@redhat.com

drm/vc4: crtc: protect device resources after removal

(Hardware) resources which are bound to the driver and device lifecycle
must not be accessed after the device and driver are unbound.

However, the DRM device isn't freed as long as the last user closed it,
hence userspace can still call into the driver.

Therefore protect the critical sections which are accessing those
resources with drm_dev_enter() and drm_dev_exit().

Fixes: 7cc4214c27cf ("drm/vc4: crtc: Switch to drmm_kzalloc")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-4-dakr@redhat.com

drm/vc4: plane: protect device resources after removal

(Hardware) resources which are bound to the driver and device lifecycle
must not be accessed after the device and driver are unbound.

However, the DRM device isn't freed as long as the last user closed it,
hence userspace can still call into the driver.

Therefore protect the critical sections which are accessing those
resources with drm_dev_enter() and drm_dev_exit().

Fixes: 9872c7a31921 ("drm/vc4: plane: Switch to drmm_universal_plane_alloc()")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-3-dakr@redhat.com

drm/vc4: hdmi: unlock mutex when device is unplugged

In vc4_hdmi_encoder_{pre,post}_crtc_enable() commit cd00ed5187bf
("drm/vc4: hdmi: Protect device resources after removal") missed to
unlock the mutex before returning due to drm_dev_enter() indicating the
device being unplugged.

Fixes: cd00ed5187bf ("drm/vc4: hdmi: Protect device resources after removal")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-2-dakr@redhat.com

drm/display/dp_mst: Move all payload info into the atomic state

Now that we've finally gotten rid of the non-atomic MST users leftover in
the kernel, we can finally get rid of all of the legacy payload code we
have and move as much as possible into the MST atomic state structs. The
main purpose of this is to make the MST code a lot less confusing to work
on, as there's a lot of duplicated logic that doesn't really need to be
here. As well, this should make introducing features like fallback link
retraining and DSC support far easier.

Since the old payload code was pretty gnarly and there's a Lot of changes
here, I expect this might be a bit difficult to review. So to make things
as easy as possible for reviewers, I'll sum up how both the old and new
code worked here (it took me a while to figure this out too!).

The old MST code basically worked by maintaining two different payload
tables - proposed_vcpis, and payloads. proposed_vcpis would hold the
modified payload we wanted to push to the topology, while payloads held the
payload table that was currently programmed in hardware. Modifications to
proposed_vcpis would be handled through drm_dp_allocate_vcpi(),
drm_dp_mst_deallocate_vcpi(), and drm_dp_mst_reset_vcpi_slots(). Then, they
would be pushed via drm_dp_mst_update_payload_step1() and
drm_dp_mst_update_payload_step2().

Furthermore, it's important to note how adding and removing VC payloads
actually worked with drm_dp_mst_update_payload_step1(). When a VC payload
is removed from the VC table, all VC payloads which come after the removed
VC payload's slots must have their time slots shifted towards the start of
the table. The old code handles this by looping through the entire payload
table and recomputing the start slot for every payload in the topology from
scratch. While very much overkill, this ends up doing the right thing
because we always order the VCPIs for payloads from first to last starting
timeslot.

It's important to also note that drm_dp_mst_update_payload_step2() isn't
actually limited to updating a single payload - the driver can use it to
queue up multiple payload changes so that as many of them can be sent as
possible before waiting for the ACT. This is -technically- not against
spec, but as Wayne Lin has pointed out it's not consistently implemented
correctly in hubs - so it might as well be.

drm_dp_mst_update_payload_step2() is pretty self explanatory and basically
the same between the old and new code, save for the fact we don't have a
second step for deleting payloads anymore -and thus rename it to
drm_dp_mst_add_payload_step2().

The new payload code stores all of the current payload info within the MST
atomic state and computes as much of the state as possible ahead of time.
This has the one exception of the starting timeslots for payloads, which
can't be determined at atomic check time since the starting time slots will
vary depending on what order CRTCs are enabled in the atomic state - which
varies from driver to driver. These are still stored in the atomic MST
state, but are only copied from the old MST state during atomic commit
time. Likewise, this is when new start slots are determined.

Adding/removing payloads now works much more closely to how things are
described in the spec. When we delete a payload, we loop through the
current list of payloads and update the start slots for any payloads whose
time slots came after the payload we just deleted. Determining the starting
time slots for new payloads being added is done by simply keeping track of
where the end of the VC table is in
drm_dp_mst_topology_mgr->next_start_slot. Additionally, it's worth noting
that we no longer have a single update_payload() function. Instead, we now
have drm_dp_mst_add_payload_step1|2() and drm_dp_mst_remove_payload(). As
such, it's now left it up to the driver to figure out when to add or remove
payloads. The driver already knows when it's disabling/enabling CRTCs, so
it also already knows when payloads should be added or removed.

Changes since v1:
* Refactor around all of the completely dead code changes that are
  happening in amdgpu for some reason when they really shouldn't even be
  there in the first place… :\
* Remove mention of sending one ACT per series of payload updates. As Wayne
  Lin pointed out, there are apparently hubs on the market that don't work
  correctly with this scheme and require a separate ACT per payload update.
* Fix accidental drop of mst_mgr.lock - Wayne Lin
* Remove mentions of allowing multiple ACT updates per payload change,
  mention that this is a result of vendors not consistently supporting this
  part of the spec and requiring a unique ACT for each payload change.
* Get rid of reference to drm_dp_mst_port in DC - turns out I just got
  myself confused by DC and we don't actually need this.
Changes since v2:
* Get rid of fix for not sending payload deallocations if ddps=0 and just
  go back to wayne's fix

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-18-lyude@redhat.com

drm/radeon: Drop legacy MST support

Right now, radeon is technically the only non-atomic driver still making
use of the MST helpers - and thus the final user of all of the legacy MST
helpers. Originally I was going to look into seeing if we could move legacy
MST into the radeon driver itself, however:

* SI and CIK both can use amdgpu, which still supports MST
* It currently doesn't work according to my own testing. I'm sure with some
  troubleshooting we could likely fix it, but that brings me to point #2:
* It was never actually enabled by default, and is still marked as
  experimental in the module parameter description
* If people were using it, someone probably would have probably seen a bug
  report about how it is currently not functional by now. That certainly
  doesn't appear to be the case, since before getting access to my own
  hardware I had to go out of my way to try finding someone to help test
  whether this legacy MST code even works - even amongst AMD employees.
* Getting rid of this code and only having atomic versions of the MST
  helpers to maintain is likely going to be a lot easier in the long run,
  and will make it a lot easier for others contributing to this code to
  follow along with what's happening.

FWIW - if anyone still wants this code to be in the tree and has a good
idea of how to support this without needing to maintain the legacy MST
helpers (trying to move them would probably be acceptable), I'm happy to
suggestions. But my hope is that we can just drop this code and forget
about it. I've already run this idea by Harry Wentland and Alex Deucher a
few times as well.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-17-lyude@redhat.com

drm/display/dp_mst: Maintain time slot allocations when deleting payloads

Currently, we set drm_dp_atomic_payload->time_slots to 0 in order to
indicate that we're about to delete a payload in the current atomic state.
Since we're going to be dropping all of the legacy code for handling the
payload table however, we need to be able to ensure that we still keep
track of the current time slot allocations for each payload so we can reuse
this info when asking the root MST hub to delete payloads. We'll also be
using it to recalculate the start slots of each VC.

So, let's keep track of the intent of a payload in drm_dp_atomic_payload by
adding ->delete, which we set whenever we're planning on deleting a payload
during the current atomic commit.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-16-lyude@redhat.com

drm/display/dp_mst: Drop all ports from topology on CSNs before queueing link address work

We want to start cutting down on all of the places that we use port
validation, so that ports may be removed from the topology as quickly as
possible to minimize the number of errors we run into as a result of being
out of sync with the current topology status. This isn't a very typical
scenario and I don't think I've ever even run into it - but since the next
commit is going to make some changes to payload updates depending on their
hotplug status I think it's a probably good idea to take precautions.

Let's do this with CSNs by moving some code around so that we only queue
link address probing work at the end of handling all CSNs - allowing us to
make sure we drop as many topology references as we can beforehand.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-15-lyude@redhat.com

drm/display/dp_mst: Add helpers for serializing SST <-> MST transitions

There's another kind of situation where we could potentially race with
nonblocking modesets and MST, especially if we were to only use the locking
provided by atomic modesetting:

* Display 1 begins as enabled on DP-1 in SST mode
* Display 1 switches to MST mode, exposes one sink in MST mode
* Userspace does non-blocking modeset to disable the SST display
* Userspace does non-blocking modeset to enable the MST display with a
  different CRTC, but the SST display hasn't been fully taken down yet
* Execution order between the last two commits isn't guaranteed since they
  share no drm resources

We can fix this however, by ensuring that we always pull in the atomic
topology state whenever a connector capable of driving an MST display
performs its atomic check - and then tracking CRTC commits happening on the
SST connector in the MST topology state. So, let's add some simple helpers
for doing that and hook them up in various drivers.

v2:
* Use intel_dp_mst_source_support() to check for MST support in i915, fixes
  CI failures

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-14-lyude@redhat.com

drm/nouveau/kms: Pull mst state in for all modesets

Since we're going to be relying on atomic locking for payloads now (and the
MST mgr needs to track CRTCs), pull in the topology state for all modesets
in nv50_msto_atomic_check().

Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-13-lyude@redhat.com

drm/nouveau/kms: Cache DP encoders in nouveau_connector

Post-NV50, the only kind of encoder you'll find for DP connectors on Nvidia
GPUs are SORs (serial output resources). Because SORs have fixed
associations with their connectors, we can correctly assume that any DP
connector on a nvidia GPU will have exactly one SOR encoder routed to it
for DisplayPort.

Since we're going to need to be able to retrieve this fixed SOR DP encoder
much more often as a result of hooking up MST helpers for tracking
SST<->MST transitions in atomic states, let's simply cache this encoder in
nouveau_connector for any DP connectors on the system to avoid looking it
up each time. This isn't safe for NV50 since PIORs then come into play,
however there's no code pre-NV50 that would need to look this up anyhow -
so it's not really an issue.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-12-lyude@redhat.com

drm/display/dp_mst: Fix modeset tracking in drm_dp_atomic_release_vcpi_slots()

Currently with the MST helpers we avoid releasing payloads _and_ avoid
pulling in the MST state if there aren't any actual payload changes. While
we want to keep the first step, we need to now make sure that we're always
pulling in the MST state on all modesets that can modify payloads - even if
the resulting payloads in the atomic state are identical to the previous
ones.

This is mainly to make it so that if a CRTC is still assigned to a
connector but is set to DPMS off, the CRTC still holds it's payload
allocation in the atomic state and still appropriately pulls in the MST
state for commit tracking. Otherwise, we'll occasionally forget to update
MST payloads from changes caused by non-atomic DPMS changes. Doing this
also allows us to track bandwidth limitations in a state correctly even
between DPMS changes, so that there's no chance of a simple ->active change
being rejected by the atomic check.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-11-lyude@redhat.com

drm/display/dp_mst: Don't open code modeset checks for releasing time slots

I'm not sure why, but at the time I originally wrote the find/release time
slot helpers I thought we should avoid keeping modeset tracking out of the
MST helpers. In retrospect though there's no actual good reason to do
this, and the logic has ended up being identical across all the drivers
using the helpers. Also, it needs to be fixed anyway so we don't break
things when going atomic-only with MST.

So, let's just move this code into drm_dp_atomic_release_time_slots() and
stop open coding it.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-10-lyude@redhat.com

drm/display/dp_mst: Add nonblocking helpers for DP MST

As Daniel Vetter pointed out, if we only use the atomic modesetting locks
with MST it's technically possible for a driver with non-blocking modesets
to race when it comes to MST displays - as we make the mistake of not doing
our own CRTC commit tracking in the topology_state object.

This could potentially cause problems if something like this happens:

* User starts non-blocking commit to disable CRTC-1 on MST topology 1
* User starts non-blocking commit to enable CRTC-2 on MST topology 1

There's no guarantee here that the commit for disabling CRTC-2 will only
occur after CRTC-1 has finished, since neither commit shares a CRTC - only
the private modesetting object for MST. Keep in mind this likely isn't a
problem for blocking modesets, only non-blocking.

So, begin fixing this by keeping track of which CRTCs on a topology have
changed by keeping track of which CRTCs we release or allocate timeslots
on. As well, add some helpers for:

* Setting up the drm_crtc_commit structs in the ->commit_setup hook
* Waiting for any CRTC dependencies from the previous topology state

v2:
* Use drm_dp_mst_atomic_setup_commit() directly - Jani

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-9-lyude@redhat.com

drm/display/dp_mst: Add helper for finding payloads in atomic MST state

We already open-code this quite often, and will be iterating through
payloads even more once we've moved all of the payload tracking into the
atomic state. So, let's add a helper for doing this.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-8-lyude@redhat.com

drm/display/dp_mst: Add some missing kdocs for atomic MST structs

Since we're about to start adding some stuff here, we may as well fill in
any missing documentation that we forgot to write.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-7-lyude@redhat.com

drm/display/dp_mst: Fix confusing docs for drm_dp_atomic_release_time_slots()

For some reason we mention returning 0 if "slots have been added back to
drm_dp_mst_topology_state->avail_slots". This is totally misleading,
avail_slots is simply for figuring out the total number of slots available
in total on the topology and has no relation to the current payload
allocations.

So, let's get rid of that comment.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-6-lyude@redhat.com

drm/display/dp_mst: Call them time slots, not VCPI slots

VCPI is only sort of the correct term here, originally the majority of this
code simply referred to timeslots vaguely as "slots" - and since I started
working on it and adding atomic functionality, the name "VCPI slots" has
been used to represent time slots.

Now that we actually have consistent access to the DisplayPort spec thanks
to VESA, I now know this isn't actually the proper term - as the
specification refers to these as time slots.

Since we're trying to make this code as easy to figure out as possible,
let's take this opportunity to correct this nomenclature and call them by
their proper name - timeslots. Likewise, we rename various functions
appropriately, along with replacing references in the kernel documentation
and various debugging messages.

It's important to note that this patch series leaves the legacy MST code
untouched for the most part, which is fine since we'll be removing it soon
anyhow. There should be no functional changes in this series.

v2:
* Add note that Wayne Lin from AMD suggested regarding slots being between
  the source DP Tx and the immediate downstream DP Rx

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-5-lyude@redhat.com

drm/display/dp_mst: Rename drm_dp_mst_vcpi_allocation

In retrospect, the name I chose for this originally is confusing, as
there's a lot more info in here then just the VCPI. This really should be
called a payload. Let's make it more obvious that this is meant to be
related to the atomic state and is about payloads by renaming it to
drm_dp_mst_atomic_payload. Also, rename various variables throughout the
code that use atomic payloads.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-4-lyude@redhat.com

drm/amdgpu/dm/mst: Rename get_payload_table()

This function isn't too confusing if you see the comment around the
call-site for it, but if you don't then it's not at all obvious this is
meant to copy DRM's payload table over to DC's internal state structs.
Seeing this function before finding that comment definitely threw me into a
loop a few times.

So, let's rename this to make it's purpose more obvious regardless of where
in the code you are.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-3-lyude@redhat.com

drm/amdgpu/dc/mst: Rename dp_mst_stream_allocation(_table)

Just to make this more clear to outside contributors that these are
DC-specific structs, as this also threw me into a loop a number of times
before I figured out the purpose of this.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-2-lyude@redhat.com

drm/panel-edp: add IVO M133NW4J-R3 panel entry

Add an eDP panel entry for IVO M133NW4J-R3.

Due to lack of documentation, use the delay_200_500_p2e100 timings for
now.

Signed-off-by: Steev Klimaszewski <steev@kali.org>
[dianders: fixed typo in commit message]
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720054152.2450-1-steev@kali.org

subdev/clk: fix repeated words in comments

 Delete the redundant word 'at'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220821143038.46589-1-wangjianli@cdjrlc.com

drm/nouveau/hwmon: use simplified HWMON_CHANNEL_INFO macro

This makes the code look cleaner and easier to read.

Signed-off-by: Beniamin Sandu <beniaminsandu@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220815104028.381271-1-beniaminsandu@gmail.com

drm/panel-edp: add AUO B133UAN02.1 panel entry

Add an eDP panel entry for AUO B133UAN02.1.

Due to lack of documentation, use the delay_200_500_e50 timings like
some other AUO entries for now.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711075202.21775-1-johan+linaro@kernel.org

drm/lcdif: switch to devm_drm_of_get_bridge

The function "drm_of_find_panel_or_bridge" has been deprecated in
favor of "devm_drm_of_get_bridge".

Switch to the new function and reduce boilerplate.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reported-by: Liu Ying <victor.liu@oss.nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 9db35bb349a0e ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liu Ying <victor.liu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819140852.255187-4-marex@denx.de

drm/lcdif: Clean up debug prints and comments

Update debug print to report bridge timings over connector ones.
Drop missed comment commit from mxsfb.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reported-by: Liu Ying <victor.liu@oss.nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 9db35bb349a0e ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liu Ying <victor.liu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819140852.255187-3-marex@denx.de

drm/lcdif: Consistently use plain timings

Drop the crtc_ prefix from mode, consistently use the plain one.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reported-by: Liu Ying <victor.liu@oss.nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 9db35bb349a0e ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liu Ying <victor.liu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819140852.255187-2-marex@denx.de

drm/lcdif: Clean up headers

Drop unneeded headers, sort rest alphabetically, no functional change.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reported-by: Liu Ying <victor.liu@oss.nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 9db35bb349a0e ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liu Ying <victor.liu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819140852.255187-1-marex@denx.de

drm/ttm: Switch to using the new res callback

Apply new intersect and compatible callback instead
of having a generic placement range verfications.

v2: Added a separate callback for compatiblilty
    checks (Christian)
v3: Cleanups and removal of workarounds

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820073304.178444-6-Arunpravin.PaneerSelvam@amd.com

drm/nouveau: Implement intersect/compatible functions

Implemented a new intersect and compatible callback function
fetching the start offset from struct ttm_resource.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820073304.178444-5-Arunpravin.PaneerSelvam@amd.com