staging: comedi: rtd520: move constants to right side of comparisons

Fix the checkpatch.pl issues about:

WARNING: Comparisons should place the constant on the right side of the test

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: rename rtd520Boards

For aesthetics, rename this CamelCase array.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd529: usleep_range is preferred over udelay

Fix checkpatch issue: "CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt".  `udelay()` is only used in the
firmware upload process.  Replace them with `usleep_range()` with a
reasonable upper limit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: fix logical continuations

Fix the checkpatch.pl issues about:

CHECK: Logical continuations should be on the previous line

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: prefer using the BIT macro

Use the BIT macro to define the register bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_pci.c: improve function documentation

Expand the descriptions of the functions and document the return values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rti800: use comedi_offset_munge()

Use the comedi_offset_munge() helper to do the two's complement
to comedi offset binary and comedi offset binary to two's complement
conversions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rti800: prefer using the BIT macro

Use the BIT macro to define the register bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops.c: Tweak kernel-doc for consistency

Adjust the kernel-doc in this file for consistency of capitalization and
punctuation.  Make more use of the special kernel-doc markers for
parameter names, constant names, etc.  Use the correct kernel-doc tag
for the return values sections.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf.c: document remaining exported functions

Add kernel-doc headers to the remaining functions marked for export.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_buf.c: tweak existing kernel-doc

Expand the kernel-doc descriptions of those exported functions that
already have kernel-doc comments.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document remaining inline functions

Add kernel-doc headers to the inline functions that do not have them
yet.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: tweak docs for inline functions

Tweak the kernel-doc for already documented inline functions for
consistency, and document their return values.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: tweak struct comedi_async documentation

Make the kernel-doc layout for `struct comedi_async` more consistent
with the documentation for the other COMEDI data types.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document struct comedi_lrange

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document struct comedi_buf_map

Add kernel-doc for `struct comedi_buf_map` and the associated `struct
comedi_buf_page`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document struct comedi_subdevice

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document struct comedi_device

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: document struct comedi_driver

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: tweak kernel-doc for struct comedi_async

Tweak the formatting of the kernel-doc formatted comment for `struct
comedi_async` in order to stop it generating bogus headings for text
before a colon.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: use enum for COMEDI_CB_... constants

The existing constants `COMEDI_CB_EOS` etc. are in the form of macros
and have a bogus kernel-doc comment.  Change them to `enum` constants so
they can be documented properly with kernel-doc.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedidev.h: reformat copyright comment

Use the preferred block comment style.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers.c: document exported functions

Add missing kernel-doc to the low-level COMEDI driver API functions
exported from "drivers.c" and tart up some of the existing kernel-doc
comments for consistency.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers.c: replace #include <linux/dma-mapping.h>

Comedi's "drivers.c" doesn't use anything from `<linux/dma-mapping.h>`,
but it does use `DMA_NONE` from `<linux/dma-direction.h>`, so replace
the appropriate `#include` directive.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers.c: remove irrelevant #includes

Comedi's "drivers.c" doesn't use anything from these included headers,
so remove them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix pcm_write input/output error

This patch keeps the process from sleeping after the PCM middle layer has
stopped playback by calling the pcm trigger callback. The patch is needed
to prevent aplay from causing a pcm_write Input/Output error.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: add poll syscall to AIM cdev

This patch adds the implementation of the poll syscall to the AIM cdev.
To have the full functionality, a helper function is needed in the
core module to retrieve the instantaneous availability of tx buffers.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove audio resolution format check

This patch removes the audio format cross-check, because the definitions
are not compatible.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix style problems

This patch simply corrects style violations.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: move initialization code

This pathch moves the initialization of the PCM middle layer hardware
parameters to function audio_set_hw_params().

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: rename function

This patch renames the function audio_set_pcm_format(). Since the
function doesn't only set the PCM format anymore and to guard against
misunderstandings, its name needs to be changed.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: add missing channel initialization

This patch adds missing initialization of channel count for 8-bit mono
audio resolution.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: purge unecessary variable

This patch purges a temp. variable to store the functions return value.
Since the content is never being evaluated, it can safely be removed.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: squash AIM sound

This patch removes debug messages and prevents the sound AIM from being
noisy in kernel log.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: make hardware parameters channel exclusive

Since the PCM interface's hardware parameters are channel/substream
exclusive, the struct snd_pcm_hardware needs to be embedded in the
channel structure.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: include vendor in audio card's shortname

This patch adds Microchip as vendor to the audio card's shortname to
be displayed, when playback and capture devices are queried.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: add multi channel support to sound AIM

This patch adds 5.1 surround configuration with subbuffer cross-check,
when establishing a link to the core. For the sake of simplicity, only
one specific channel configuration is allowed.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: refactor channel structure

The struct most_c_obj has the same set of attributes for each of two AIMs.
This patch cleans up the code by introducing the new struct most_c_aim_obj
hat contains those fields.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: add fair buffer distribution

This patch ensures a fair distribution of buffers, when two AIMs share a
single channel. The AIMs then won't be able to use more than half of all
pre-allocated buffers of the linked channel. However, in case the channel
is not shared, the AIM can exclusively use all available buffers.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: consolidate code

The function drci_rd_reg() always delivers little endian representation of
the 16-bit DCI register. The value returned by this function must always be
carefully converted from __le16 to u16 type. This patch moves all those
conversions to the function itself.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: prevent DMA on stack

This patch is needed to avoid having DMA on the stack.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: simplify code

This patch simply rearranges code for better readability.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix MAC address representation

This patch fixes the representation of the MAC address within the HDM USB
module.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix buffer size for DIM2

This patch reduces the DBR buffer size to prevent an overflow in the DIM2
module. It is needed, because the MediaLB hardware has problems with DBR
buffers that exceed the size of 255 messages.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove macro cpu_to_le16

This patch removes the wrongly used macros cpu_to_le16

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix buffer synchronization request

Revision D of OS81118 network interface controller have the internal
buffer synchronization mechanism changed. This patch adapts the driver
to this.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove dead code

The case where the channel type is neither synchronous nor isochronous is
already covered by a previous condition.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove unnecessary field initialization

Since conf->extra_len has already been reset in most_start_channel() when
function hdm_configure_channel() gets called, it can safely be removed
here.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix channel operation in multi-aim context

This patch fixes the opening and closing process of a physical channel
when used by different AIMs.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix USB babble on IN pipe

This patch prevents the HDM USB from submitting an URB with a buffer size
unaligned to 512 bytes to the USB subsystem.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove shared IRQ request

Since there is no way find out whether the INIC has generated an
interrupt, the I2C interrupt must not be registered as a shared
interrupt.

Reported-by: PrasannaKumar Muralidharan <PrasannaKumar.Muraidharan@microchip.com>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix race condition in AIM networking

If the network device is being opened right after it has been registered
via function register_netdev(), the device state is not yet consistent in
the context of function ndo_open(). This patch cares about having the
initialization done right, before the networking device is registered.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove aim reset

This patch partly reverts a modification of function most_stop_channel()
that is trying to reset an established link between an AIM and an HDM in
all suitable places. But since the function most_stop_channel() is
stopping the data transfer it is the wrong place to do so.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: change structure initialization

By applying this patch the initialization of the most_aim structure is
performed at compile time.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wilc1000 : Remove unused macro definitions

Remove all unused TCP_*_MASK macro definitions

Signed-off-by: Anish Bhatt <anish@gatech.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove variable cif_func

This patch removes variable cif_func and use mac_cfg directly. No need to have
another pointer variable.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer os_wait

This patch removes function pointer os_wait which is pointer of
linux_wlan_lock_timeout and just call the real name function directly.
Remove also static from linux_wlan_lock_timeout declaration.
As os_wait is deleted, structure wilc_wlan_os_func_t is useless. Delete
wilc_wlan_os_func_t, os_func and it's related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove mutex txq_cs and it's related codes

mutex txq_cs is never used in the driver. txq_cs, txq_critical_section and
txq_lock have same pointer so just delete them and it's related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove variable rx_buffer_size

This patch removes two variables rx_buffer_size and use LINUX_RX_SIZE as
argument.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove variable tx_buffer_size

This patch removes unnecessary two variables tx_buffer_size and just use
LINUX_TX_SIZE as argument.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove pointer varialbes of hif_cs

Remove hif_lock and hif_critical_section which are pointer of
g_linux_wlan->hif_cs. Remove also it's related codes.
Just use mutex varialbe g_linux_wlan->hif_cs.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove pointer variables of txq_add_to_head_cs

This patch removes txq_add_to_head_critical_section and txq_add_to_head_lock
which are pointer of g_linux_wlan->txq_add_to_head_cs.
Just use g_linux_wlan->txq_add_to_head_cs as argument of function.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove pointer varialbe cfg_wait and cfg_wait_event

This patch removes cfg_wait and cfg_wait_event which are pointer of
g_linux_wlan->cfg_event. No need to have pointer varialbe of it. Just use
g_linux_wlan->cfg_event.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove pointer variable of g_linux_wlan->txq_event

Remove variable txq_wait and txq_wait_event which are pointer varialbe
of g_linux_wlan->txq_event. No need to have extra pointer varialbe. Just use
g_linux_wlan->txq_event. Remove os_context.txq_wait_event, txq_wait and it's
related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use g_linux_wlan->rxq_cs for function arguemnt

Use mutex variable g_linux_wlan->rxq_cs instead of pointer varialbe.
No need to make extra pointer variable for the mutex. Remove
rxq_critical_section, rxq_lock and it's related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use g_linux_wlan->txq_spinlock not the pointer of it

Use spinlock variable g_linux_wlan->txq_spinlock itself instead of
g_wlan.txq_spinlock which is pointer of g_linux_wlan->txq_spinlock.
Delete os_context.txq_spin_lock, g_wlan.txq_spinlock and it's related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer os_debug

This patch removes os_debug and call linux_wlan_dbg function instead of
os_debug. Delete static from the linux_wlan_dbg.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer rx_complete

just call the function linux_wlan_rx_complete directly. No need for a pointer
to the functions. Remove rx_complete, wilc_wlan_net_func_t and net_func which
are not used anymore.
Finally remove static from the function linux_wlan_rx_complete.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer mac_indicate

No need for a pointer to a function. Just call linux_wlan_mac_indicate.
Remove mac_indicate and also wilc_wlan_indicate_func_t since no members in it.
Variable indicate_func is not used so delete it and related codes.
Finally remove static from the function linux_wlan_mac_indicate.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer rx_indicate

This patch removes function pointer rx_indicate and call the function
frmw_to_linux directly.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove WILC_OSW_INTERFACE_VER define

This patch removes WILC_OSW_INTERFACE_VER define that is not used
anywhere.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move wilc_msgqueue.h include file

This patch moves wilc_msgqueue.h include file from wilc_oswrapper.h to
host_interface.c because message queue function as wilc_mq_create,
wilc_mq_send, wilc_mq_recv and wilc_mq_destroy are used only at
host_interface.c file.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove wilc_platform.h include file

This patch removes wilc_platform.h include file that is defined in
wilc_msgqueue.h file. After removing it, compilation error occurs so
that it is included two header files as <linux/semaphore.h> and
<linux/slab.h> at wilc_msgqueue.h and wilc_msgqueue.c

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move struct Message and WILC_MsgQueueHandle

This patch moves struct Message and WILC_MsgQueueHandle from
wilc_platform.h to wilc_msgqueue.h because those two structures are used
only at wilc_msgqueue.c so that it is good to be defined at
wilc_msgqueue.h

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove define DISABLE_PWRSAVE_AND_SCAN_DURING_IP

The driver will use define DISABLE_PWRSAVE_AND_SCAN_DURING_IP always. So remove
the ifdef line and define in Makefile.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove ifdef OLD_FPGA_BITFILE line

OLD_FPGA_BITFILE is not used in the driver. Just delete ifdef line and it's
related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: parse_network_info: remove s32Error

s32Error is defined, but not used anywhere in this function.
Then just delete it and return 0 at the end of this function.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename ParseNetworkInfo

This patch replaces ParseNetworkInfo with parse_network_info to avoid
camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove extern declaration

This patch removes extern declaration of *gpstrWlanOps in
coreconfigurator.c file. It is defined extern declaration in
wilc_wlan_if.h file and then is included in coreconfigurator.c file.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove useless comment

This patch removes useless comment in coreconfigurator.c

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace kmalloc_array/memset with kcalloc

This patch replaces kmalloc_array followed by memset with kcalloc.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace kmalloc/memcpy with kmemdup

This patch replaces kmalloc followed by memset and memcpy with kmemdup.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace kmalloc with kzalloc

This patch replaces kmalloc with kzalloc because it is initialized by 0
immediately after allcating memory.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename SendConfigPkt

This patch replaces SendConfigPkt with send_config_pkt to aovid
camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove CoreConfiguratorDeInit

This patch removes CoreConfiguratorDeInit function, which is not doing
anything else except printing a PRINT_D message and returning a
s32Error. It is also removed the codes that is calling this function.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wicl1000: fix dereference after free in wilc_wlan_cleanup()

The wilc_wlan_cleanup() function iterates over the list of transmission
buffers freeing all of them and then iterates over the receive buffers
list to free all of them as well.

But on the receive loop a pointer to struct txq_entry_t is dereferenced
instead of the pointer to a struct rxq_entry_t. This not only causes a
dereference to a pointer already freed but also leaks the memory in the
struct rxq_entry_t buffer.

Also, the buffer is allocated when MEMORY_STATIC is not defined no when
MEMORY_DYNAMIC is defined. So use #ifndef MEMORY_STATIC instead as it's
done in the rest of the driver to avoid leaking the buffer memory.

Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_int_init: remove unnecessary parentheses

This patch removes unnecessary parentheses found by checkpatch.pl

Unnecessary parentheses around pstrWFIDrv->hSemTestKeyBlock
Unnecessary parentheses around pstrWFIDrv->hSemTestDisconnectBlock
Unnecessary parentheses around pstrWFIDrv->hSemGetRSSI
Unnecessary parentheses around pstrWFIDrv->hSemGetLINKSPEED
Unnecessary parentheses around pstrWFIDrv->hSemGetCHNL
Unnecessary parentheses around pstrWFIDrv->hSemInactiveTime
Unnecessary parentheses around pstrWFIDrv->gtOsCfgValuesSem
Unnecessary parentheses around pstrWFIDrv->gtOsCfgValuesSem

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_int_init: remove blank line before a close brace.

This patch removes blank line before a close brace.
CHECK: Blank lines aren't necessary before a close brace '}'

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_int_init: replace s32Error with result

This patch replaces s32Error with result in host_int_init function to
avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_int_init: remove commented code

This patch removes commented code in host_int_init function.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_int_init: remove multiple blank lines

This patch removes multiple blank lines in host_int_init function.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_int_init: fix kzalloc error check

This patch fixes error check when kzalloc is failed.
NULL comparison style is changed to use ! operator and
PRINT_ER is also removed.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_int_init: replace kmalloc with kzalloc

This patch replaces kmalloc with kzalloc in host_int_init.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_int_init: remove meaningless comment

This patch removes meaningless comment in host_int_init function.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove CoreConfiguratorInit

This patch removes CoreConfiguratorInit function, which is not doing
anything else except printing a PRINT_D message and returing a s32Error.
It is also removed the code that is calling this function.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: make add_virtual_intf static

This patch makes add_virtual_intf static. This function is used only at
wilc_wfi_cfgoperation.c file.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: make mgmt_tx static

This patch makes mgmt_tx static. This function is used only at
wilc_wfi_cfgoperation.c file.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: make mgmt_tx_cancel_wait static

This patch makes mgmt_tx_cancel_wait static. This function is used only
at wilc_wfi_cfgoperation.c file.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: make del_virtual_intf static

This patch makes del_virtual_intf static. This function is used only at
wilc_wfi_cfgoperation.c file.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename WILC_WFI_set_cqm_rssi_config

This patch replaces WILC_WFI_set_cqm_rssi_config with
set_cqm_rssi_config to avoid CamelCase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>