Michal Simek [Tue, 22 Jan 2013 23:40:06 +0000 (23:40 +0000)]
serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI option
CONFIG_ARM_DCC_MULTI should be also removed in the patch
"serial: Remove CONFIG_SERIAL_MULTI from serial drivers"
(sha1:
a3827250606895ec2dd4b8d867342b7cabf3692f)
Because the driver defines serial_* functions
which cause conflict with serial.c (multiple definition of serial_*)
Removing CONFIG_SERIAL_MULTI function also require to define
default_serial_console for cases where another serial driver
is not available in the system.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Marek Vasut <marex@denx.de>
Jagannadha Sutradharudu Teki [Wed, 12 Dec 2012 04:48:56 +0000 (04:48 +0000)]
sf: stmicro: add support for N25Q064
Add support for Numonyx N25Q064 SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Richard Genoud [Mon, 3 Dec 2012 06:28:28 +0000 (06:28 +0000)]
cmd_time: merge run_command_and_time_it with cmd_process
As far as every arch has a get_timer function,
run_command_and_time_it code can now disappear.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-By: Che-Liang Chiou <clchiou@chromium.org>
[trini: s/ulong/unsigned long/ in command.h portion]
Signed-off-by: Tom Rini <trini@ti.com>
Jim Lin [Thu, 24 Jan 2013 01:05:55 +0000 (01:05 +0000)]
console: USB: KBD: Fix incorrect autoboot timeout
Autoboot timeout defined by CONFIG_BOOTDELAY will not be accurate if
CONFIG_USB_KEYBOARD and CONFIG_SYS_USB_EVENT_POLL are defined in
configuration file and when tstc() function for checking key pressed
takes longer time than 10 ms (e.g., 50 ms) to finish.
Signed-off-by: Jim Lin <jilin@nvidia.com>
Jeroen Hofstee [Tue, 8 Jan 2013 13:35:53 +0000 (13:35 +0000)]
board sc3: fix warning about nested comment
cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Fabio Estevam [Tue, 8 Jan 2013 05:36:11 +0000 (05:36 +0000)]
common: env_mmc: Use __weak annotation to simplify code
Using the __weak annotation can make the code cleaner.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Gabor Juhos [Sun, 6 Jan 2013 23:04:25 +0000 (23:04 +0000)]
common/cmd_bootm.c: prevent running of subcommands before 'bootm start'
The execution order of the bootm subcommands is fixed.
Although here is a sanity check in the state machine
which should prevent running the subcommands in wrong
order but it does not catch all possible errors.
It is possible to run any subcommand without running
'bootm start' first which leads to unexpected behaviour.
For example, running 'bootm loados' without 'bootm start'
causes a hang:
U-Boot> bootm loados
XIP Invalid Image ... OK
OK
Add a sanity check to 'do_bootm_subcommand' in order
to ensure that no subcommands can be executed before
'bootm start'.
After the patch running of any subcommand without running
'bootm start' will cause an error like this:
U-Boot> bootm loados
Trying to execute a command out of order
bootm - boot application image from memory
Usage:
bootm [addr [arg ...]]
- boot application image stored in memory
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Alexey Brodkin [Thu, 3 Jan 2013 01:02:46 +0000 (01:02 +0000)]
drivers/block/systemace - fixed data type in "systemace_read" to match prototype in "block_dev_desc_t"
Currently we have "unsigned long blkcnt" which is fine with
CONFIG_SYS_64BIT_LBA undefined because "lbaint_t" is basically the same
"unsigned long".
If CONFIG_SYS_64BIT_LBA gets defined "lbaint_t" is defined as "unsigned
long long".
Even though not many embedded systems have CONFIG_SYS_64BIT_LBA defined
it's good to have types in function implementation that match exactly
with prototypes.
Signed-off-by: Alexey Brodkin <alexey.brodkin@gmail.com>
Richard Genoud [Thu, 13 Dec 2012 03:30:10 +0000 (03:30 +0000)]
FAT: remove ifdefs to make the code more readable
ifdefs in the code are making it harder to read.
The use of simple if(vfat_enabled) makes no more code and is cleaner.
(the code is discarded by the compiler instead of the preprocessor.)
NB: if -O0 is used, the code won't be discarded
and bonus, now the code compiles even if CONFIG_SUPPORT_VFAT is not
defined.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Richard Genoud [Thu, 13 Dec 2012 00:47:36 +0000 (00:47 +0000)]
FAT: use toupper/tolower instead of recoding them
toupper/tolower function are already declared, so use them.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Ashok [Wed, 7 Nov 2012 07:39:29 +0000 (07:39 +0000)]
configs:Remove unused macro CONFIG_DISCOVER_PHY
Remove unused macro CONFIG_DISCOVER_PHY from configs.
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Simon Glass [Thu, 13 Dec 2012 20:49:27 +0000 (20:49 +0000)]
x86: Use generic global_data
Move x86 over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:26 +0000 (20:49 +0000)]
sparc: Use generic global_data
Move sparc over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:25 +0000 (20:49 +0000)]
sh: Use generic global_data
Move sh over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:24 +0000 (20:49 +0000)]
sandbox: Use generic global_data
Move sandbox over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:23 +0000 (20:49 +0000)]
powerpc: Use generic global_data
Move powerpc over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:22 +0000 (20:49 +0000)]
openrisc: Use generic global_data
Move openrisc over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:21 +0000 (20:49 +0000)]
nios2: Use generic global_data
Move nios2 over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
Simon Glass [Thu, 13 Dec 2012 20:49:20 +0000 (20:49 +0000)]
nds32: Use generic global_data
Move nds32 over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:19 +0000 (20:49 +0000)]
mips: Use generic global_data
Move mips over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:18 +0000 (20:49 +0000)]
microblaze: Use generic global_data
Move microblaze over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Simon Glass [Thu, 13 Dec 2012 20:49:17 +0000 (20:49 +0000)]
m68k: Use generic global_data
Move m68k over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:16 +0000 (20:49 +0000)]
blackfin: Use generic global_data
Move blackfin over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:15 +0000 (20:49 +0000)]
avr32: Use generic global_data
Move avr32 over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:14 +0000 (20:49 +0000)]
arm: Use generic global_data
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:13 +0000 (20:49 +0000)]
Only use fb_base if we have a display
The ideal of having a frame buffer when there isn't a display is not
that useful. Change the bdinfo command to expect this only when we
have an lcd or video display.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:12 +0000 (20:49 +0000)]
Add generic global_data
Add a generic global_data structure which all archs will eventually
use.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:11 +0000 (20:49 +0000)]
sandbox: Move ram_buf to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:10 +0000 (20:49 +0000)]
avr32: Move cpu_hz to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:09 +0000 (20:49 +0000)]
avr32: Move stack_end to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:08 +0000 (20:49 +0000)]
mips: Move per_clk and dev_clk to arch_global_data
Move these field into arch_global_data and tidy up. The other
CONFIG_JZSOC fields are used by various architectures, so just remove
the #ifdef bracketing for these.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:07 +0000 (20:49 +0000)]
m68k: Move CONFIG_EXTRA_CLOCK to arch_global_data
Move inp_clk, vco_clk and flb_clk into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:06 +0000 (20:49 +0000)]
sparc: Drop kbd_status and reset_status from global_data
These fields is not used on sparc, so punt them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:05 +0000 (20:49 +0000)]
ppc: arm: Move sdhc_clk into arch_global_data
This is used by both powerpc and arm, but I think it still qualifies as
architecture-specific.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:04 +0000 (20:49 +0000)]
ppc: Move kbd_status to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:03 +0000 (20:49 +0000)]
ppc: Move wdt_last to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:02 +0000 (20:49 +0000)]
ppc: Move fpga_state to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:01 +0000 (20:49 +0000)]
ppc: Remove console_addr from global data
This does not appear to be used, so punt it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:00 +0000 (20:49 +0000)]
ppc: Move mirror_hack to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:59 +0000 (20:48 +0000)]
arm: Move uart_clk to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:58 +0000 (20:48 +0000)]
ppc: Move dp_alloc_base, dp_alloc_top to arch_global_data
Move these fields into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:57 +0000 (20:48 +0000)]
ppc: Move arbiter fields to arch_global_data
Move arbiter_event_attributes and arbiter_event_address into
arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:56 +0000 (20:48 +0000)]
ppc: Move reset_status to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:55 +0000 (20:48 +0000)]
ppc: Move mpc8220 clocks to arch_global_data
Move these fields into arch_global_data and tidy up. The bExtUart field
does not appear to be used, so punt it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:54 +0000 (20:48 +0000)]
ppc: Move mpc512x clocks to arch_global_data
Move ips_clk and csb_clk into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:53 +0000 (20:48 +0000)]
ppc: Move mpc5xxx clocks to arch_global_data
Move ipb_clk and pci_clk into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:52 +0000 (20:48 +0000)]
ppc: Move used_tlb_cams to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:51 +0000 (20:48 +0000)]
ppc: Move used_laws to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:50 +0000 (20:48 +0000)]
ppc: Move CONFIG_QE to arch_global_data
Move the quantative easing fields into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:49 +0000 (20:48 +0000)]
ppc: m68k: Move i2c1_clk, i2c2_clk to arch_global_data
Move these fields into arch_global_data and tidy up. This is needed for
both ppc and m68k since they share the i2c driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:48 +0000 (20:48 +0000)]
ppc: Move lbc_clk and cpu to arch_global_data
Move these fields into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Update for bsc9132qds.c, b4860qds.c]
Signed-off-by: Tom Rini <trini@ti.com>
Simon Glass [Thu, 13 Dec 2012 20:48:47 +0000 (20:48 +0000)]
ppc: Move mpc83xx clock fields to arch_global_data
Move al mpc83xx fields into arch_global_data and tidy up. Also indent
the nested #ifdef for clarity.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:46 +0000 (20:48 +0000)]
ppc: Move clock fields to arch_global_data
Move vco_out, cpm_clk, scc_clk, brg_clk into arch_global_data and tidy
up. Leave pci_clk on its own since this should really depend only on
CONFIG_PCI and not any particular chip type.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:45 +0000 (20:48 +0000)]
ppc: Remove extra pci_clk fields from global_data
PPC has several of these fields, selected by chip type, although only one
is ever compiled in.
Instead, use a single field. It would be nice if this could be selected
by CONFIG_PCI, but some chips (e.g. mpc5xxx) use pci_clk even when
CONFIG_PCI is not enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:44 +0000 (20:48 +0000)]
ppc: Move brg_clk to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:43 +0000 (20:48 +0000)]
x86: Remove reset_status, relocoff from global_data
These fields are not used on x86, so punt them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:41 +0000 (20:48 +0000)]
x86: Move gd_addr into arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add arch/x86/cpu/cpu.c changes after Graeme's comments]
Signed-off-by: Tom Rini <trini@ti.com>
Simon Glass [Thu, 13 Dec 2012 20:48:42 +0000 (20:48 +0000)]
x86: Set up the global data pointer in C instead of asm
We currently assume that the global data pointer is at the start of
struct global_data. We want to remove this restriction, and it is
easiest to do this in C.
Remove the asm code and add equivalent code in C.
This idea was proposed by Graeme Russ here:
http://patchwork.ozlabs.org/patch/199741/
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Apply Graeme Russ' comments
http://patchwork.ozlabs.org/patch/206305/ here, re-order]
Signed-off-by: Tom Rini <trini@ti.com>
Simon Glass [Thu, 13 Dec 2012 20:48:40 +0000 (20:48 +0000)]
x86: Remove gdt_addr from arch_global_data
Remove this unused field.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:39 +0000 (20:48 +0000)]
arm: Move tlb_addr and tlb_size to arch_global_data
Move these fields into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Address tlb_size in this patch as well]
Signed-off-by: Tom Rini <trini@ti.com>
Simon Glass [Thu, 13 Dec 2012 20:48:38 +0000 (20:48 +0000)]
nds32: Drop tlb_addr from global data
This field doesn't appear to be used for anything important, so drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:37 +0000 (20:48 +0000)]
ixp: Move timestamp to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:36 +0000 (20:48 +0000)]
arm: Move timer_reset_value to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:35 +0000 (20:48 +0000)]
arm: Move lastinc to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:34 +0000 (20:48 +0000)]
arm: Move tbl to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:33 +0000 (20:48 +0000)]
arm: Move tbu to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:32 +0000 (20:48 +0000)]
arm: Move timer_rate_hz into arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:31 +0000 (20:48 +0000)]
at91: Move at91 global data into arch_global_data
Move these fields into arch_global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:30 +0000 (20:48 +0000)]
Add architecture-specific global data
We plan to move architecture-specific data into a separate structure so
that we can make the rest of it common.
As a first step, create struct arch_global_data to hold these fields.
Initially it is empty.
This patch applies to all archs at once. I can split it if this is really
a pain.
Signed-off-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Fri, 11 Jan 2013 03:35:48 +0000 (03:35 +0000)]
vfat: Fix mkcksum argument sizes
In case a function argument is known/fixed size array in C, the argument is
still decoyed as pointer instead ( T f(U n[k]) ~= T fn(U *n) ) and therefore
calling sizeof on the function argument will result in the size of the pointer,
not the size of the array.
The VFAT code contains such a bug, this patch fixes it.
Reported-by: Aaron Williams <Aaron.Williams@cavium.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <tom.rini@gmail.com>
Cc: Aaron Williams <Aaron.Williams@cavium.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Lucas Stach [Tue, 22 Jan 2013 00:15:49 +0000 (00:15 +0000)]
arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
No one expects to end up in a delayed environment if
CONFIG_DELAY_ENVIRONMENT isn't defined.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Simon Glass <sjg@chromium.org>
Acked-by: Allen Martin <amartin@nvidia.com>
Tom Rini [Thu, 31 Jan 2013 00:26:38 +0000 (19:26 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-mips
Gabor Juhos [Wed, 30 Jan 2013 04:31:58 +0000 (04:31 +0000)]
MIPS: qi_lb60: remove custom u-boot.lds script
Remove the board specific linker script. It is not
needed anymore, the unified MIPS linker script can
be used instead.
The qi_lb60 target produces a slightly different
image after the change than before. The value of
'num_got_entries' symbol is different:
@@ -49,7 +49,7 @@
801000b4:
80122d00 lb s2,11520(zero)
801000b8:
80123500 lb s2,13568(zero)
801000bc:
80123ef8 lb s2,16120(zero)
-
801000c0:
00000139 0x139
+
801000c0:
00000136 tne zero,zero,0x4
801000c4 <in_ram>:
801000c4:
8d0bfffc lw t3,-4(t0)
This is caused by the different placement of the
'__got_start' and '__got_end' symbols between the
board specific scrip and the unified script.
board specific script:
__got_start = .;
.got : { *(.got) }
__got_end = .;
unified script:
.got : {
__got_start = .;
*(.got)
__got_end = .;
}
Despite this difference, the resulting images are
functionally identical.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
Gabor Juhos [Wed, 30 Jan 2013 04:31:57 +0000 (04:31 +0000)]
MIPS: dbau1x00: remove custom u-boot.lds script
Remove the board specific linker script. It is not
needed anymore, the unified MIPS linker script can
be used instead.
All dbau1x00 targets are producing identical binary
images after the change than before.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Gabor Juhos [Wed, 30 Jan 2013 04:31:56 +0000 (04:31 +0000)]
MIPS: incaip: remove custom u-boot.lds script
Remove the board specific linker script. It is not
needed anymore, the unified MIPS linker script can
be used instead.
All incaip targets are producing identical binary
images after the change than before.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Wolfgang Denk <wd@denx.de>
Gabor Juhos [Wed, 30 Jan 2013 04:31:55 +0000 (04:31 +0000)]
MIPS: vct: remove custom u-boot.lds script
Remove the board specific linker script. It is not
needed anymore, the unified MIPS linker script can
be used instead.
All vct targets are producing identical binary
images after the change than before.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Gabor Juhos [Wed, 30 Jan 2013 04:31:54 +0000 (04:31 +0000)]
MIPS: pb1x00: remove custom u-boot.lds script
Remove the board specific linker script. It is not
needed anymore, the unified MIPS linker script can
be used instead.
All pb1x00 targets are producing identical binary
images after the change than before.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Gabor Juhos [Wed, 30 Jan 2013 04:31:53 +0000 (04:31 +0000)]
MIPS: qemu-mips: use the unified u-boot.lds script
Remove the board specific linker script. It is not
needed anymore, the unified MIPS linker script can
be used instead.
All qemu_mips targets are producing identical binary
images after the change than before.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Gabor Juhos [Wed, 30 Jan 2013 04:31:52 +0000 (04:31 +0000)]
MIPS: add unified u-boot.lds file
The patch adds an unified linker script file which
can be used for all currently supported MIPS targets.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
Acked-by: Stefan Roese <sr@denx.de>
Gabor Juhos [Wed, 30 Jan 2013 02:22:51 +0000 (02:22 +0000)]
MIPS: remove OUTPUT_FORMAT from linker scripts
The OUTPUT_FORMAT command in linker scripts
was always misused due to some endianess and
toolchain problems.
Use GCC flags to ensure proper output format,
and get rid of the OUTPUT_FORMAT commands in
the board specific u-boot.lds files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
Gabor Juhos [Wed, 30 Jan 2013 04:51:06 +0000 (04:51 +0000)]
MIPS: xburst: simplify relocation offset calculation
The current code uses four instructions and a
temporary register to calculate the relocation
offset and to adjust the gp register.
The relocation offset can be calculated directly
from the CONFIG_SYS_MONITOR_BASE constant and from
the destination address. The resulting offset can
be used to adjust the gp pointer.
This approach makes the code a bit simpler because
it needs two instructions only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
Gabor Juhos [Wed, 30 Jan 2013 04:56:37 +0000 (04:56 +0000)]
MIPS: simplify relocated _G_O_T_ address calculation
The difference between the address of the original
and the relocated _GLOBAL_OFFSET_TABLE_ is always
the same as the relocation offset.
The relocation offset is already computed and it is
available in the 's1/t6' register. Use that to adjust
the relocated _G_O_T_ address, instead of calculating
the offset again from the _gp value.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Xiangfu Liu <xiangfu@openmobilefree.net>
Andy Fleming [Thu, 24 Jan 2013 07:55:11 +0000 (01:55 -0600)]
corenet: Disable video on P2020DS
The P2020DS build had grown too large, and video support isn't enabled
in almost any other Freescale board. Disabling it allows us to keep
building, and provides options for reenabling it later.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Prabhakar Kushwaha [Wed, 23 Jan 2013 17:59:37 +0000 (17:59 +0000)]
board/common: Add support for QIXIS read/write using i2c
QIXIS FPGA is accessable via both i2c and flash controller.
Only flash controller access is supported.
Add support of i2c based access. It is quite useful in the scenario
where either flash controller path is broken or not present.
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Shengzhou Liu [Wed, 23 Jan 2013 19:56:23 +0000 (19:56 +0000)]
powerpc/t4240: Adding workaround errata A-005871
When CoreNet Fabric (CCF) internal resources are consumed by the cores,
inbound SRIO messaging traffic through RMan can put the device into a
deadlock condition.
This errata workaround forces internal resources to be reserved for
upstream transactions. This ensures resources exist on the device for
upstream transactions and removes the deadlock condition.
The Workaround is for the T4240 silicon rev 1.0.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Vakul Garg [Wed, 23 Jan 2013 22:52:31 +0000 (22:52 +0000)]
powerpc/mpc85xx: Add property 'fsl, sec-era' in device tree node 'crypto'
If property 'fsl,sec-era' is already present, it is updated.
This property is required so that applications can ascertain which
descriptor commands are supported on a particular CAAM version.
Signed-off-by: Vakul Garg <vakul@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Anatolij Gustschin [Mon, 21 Jan 2013 23:50:27 +0000 (23:50 +0000)]
mpc8xxx: fix DDR init value to use CONFIG_MEM_INIT_VALUE
Configuring custom memory init value using CONFIG_MEM_INIT_VALUE in
the board config file doesn't work and memory is always initialized
to the value 0xdeadbeef. Only use this default value if a board doesn't
define CONFIG_MEM_INIT_VALUE.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Andy Fleming <afleming@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Scott Wood [Fri, 18 Jan 2013 15:45:58 +0000 (15:45 +0000)]
powerpc/mpc85xx: add support for MMUv2 page sizes
e6500 implements MMUv2 and supports power-of-2 page sizes rather than
power-of-4. Add support for such pages.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Prabhakar Kushwaha [Mon, 14 Jan 2013 18:26:57 +0000 (18:26 +0000)]
powerpc/85xx: Add BSC9132QDS support
BSC9132QDS is a Freescale reference design board for BSC9132 SoC.
BSC9132 SOC is an integrated device that targets the evolving Microcell,
Picocell, and Enterprise-Femto base station market subsegments.
It combines Power Architecture e500v2 and DSP StarCore SC3850 core
technologies with MAPLE-B2F baseband acceleration processing elements.
BSC9132QDS Overview
--------------------
2Gbyte DDR3 (on board DDR), Dual Ranki
32Mbyte 16bit NOR flash
128Mbyte 2K page size NAND Flash
256 Kbit M24256 I2C EEPROM
128 Mbit SPI Flash memory
SD slot
USB-ULPI
eTSEC1: Connected to SGMII PHY
eTSEC2: Connected to SGMII PHY
PCIe
CPRI
SerDes
I2C RTC
DUART interface: supports one UARTs up to 115200 bps for console display
Apart from the above it also consists various peripherals to support DSP
functionalities.
This patch adds support for mainly Power side functionalities and peripherals
Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Prabhakar Kushwaha [Wed, 23 Jan 2013 17:59:57 +0000 (17:59 +0000)]
powerpc/mpc85xx: Add BSC9132/BSC9232 processor support
The BSC9132 is a highly integrated device that targets the evolving
Microcell, Picocell, and Enterprise-Femto base station market subsegments.
The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
core technologies with MAPLE-B2P baseband acceleration processing elements
to address the need for a high performance, low cost, integrated solution
that handles all required processing layers without the need for an
external device except for an RF transceiver or, in a Micro base station
configuration, a host device that handles the L3/L4 and handover between
sectors.
The BSC9132 SoC includes the following function and features:
- Power Architecture subsystem including two e500 processors with
512-Kbyte shared L2 cache
- Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
cache
- 32 Kbyte of shared M3 memory
- The Multi Accelerator Platform Engine for Pico BaseStation Baseband
Processing (MAPLE-B2P)
- Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
ECC), up to 1333 MHz data rate
- Dedicated security engine featuring trusted boot
- Two DMA controllers
- OCNDMA with four bidirectional channels
- SysDMA with sixteen bidirectional channels
- Interfaces
- Four-lane SerDes PHY
- PCI Express controller complies with the PEX Specification-Rev 2.0
- Two Common Public Radio Interface (CPRI) controller lanes
- High-speed USB 2.0 host and device controller with ULPI interface
- Enhanced secure digital (SD/MMC) host controller (eSDHC)
- Antenna interface controller (AIC), supporting four industry
standard JESD207/four custom ADI RF interfaces
- ADI lanes support both full duplex FDD support & half duplex TDD
- Universal Subscriber Identity Module (USIM) interface that
facilitates communication to SIM cards or Eurochip pre-paid phone
cards
- Two DUART, two eSPI, and two I2C controllers
- Integrated Flash memory controller (IFC)
- GPIO
- Sixteen 32-bit timers
Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
James Yang [Mon, 7 Jan 2013 14:01:03 +0000 (14:01 +0000)]
powerpc/mpc8xxxx: FSL DDR debugger auto run of stored commands
This patch adds the ability for the FSL DDR interactive debugger to
automatically run the sequence of commands stored in the ddr_interactive
environment variable. Commands are separated using ';'.
ddr_interactive=compute; edit c0 d0 dimmparms caslat_X 0x3FC0; go
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
James Yang [Fri, 4 Jan 2013 08:14:03 +0000 (08:14 +0000)]
README.fsl-ddr typos and update to reflect hotkey
Documentation fix to README.fsl-ddr to fix typos and
to reflect use of 'd' hotkey to enter the FSL DDR debugger.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
James Yang [Fri, 4 Jan 2013 08:14:02 +0000 (08:14 +0000)]
Add copy command to FSL DDR interactive
Add copy command which allows copying of DIMM/controller settings.
This saves tedious retyping of parameters for each identical DIMM
or controller.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
James Yang [Fri, 4 Jan 2013 08:14:01 +0000 (08:14 +0000)]
Fix data stage name matching issue
This fix allows the name of the stage to be specifed after the
controler and DIMM is specified. Prior to this fix, if the
data stage name is not the first entry on the command line,
the operation is applied to all controller and DIMMs.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
James Yang [Fri, 4 Jan 2013 08:14:00 +0000 (08:14 +0000)]
Move DDR command parsing to separate function
Move the FSL DDR prompt command parsing to a separate function
so that it can be reused.
Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
York Sun [Fri, 4 Jan 2013 08:13:59 +0000 (08:13 +0000)]
powerpc/mpc8xxx: Enable entering DDR debugging by key press
Using environmental variable "ddr_interactive" to activate interactive DDR
debugging seomtiems is not enough. For example, after updating SPD with a
valid but wrong image, u-boot won't come up due to wrong DDR configuration.
By enabling key press method, we can enter debug mode to have a chance to
boot without using other tools to recover the board.
CONFIG_FSL_DDR_INTERACTIVE needs to be defined in header file. To enter the
debug mode by key press, press key 'd' shortly after reset, like one would
do to abort auto booting. It is fixed to lower case 'd' at this moment.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Valentin Longchamp [Fri, 4 Jan 2013 04:06:17 +0000 (04:06 +0000)]
powerpc/p2041: set RCW and PBI files for .pbl build or P2041RDB
In order to be able to build a u-boot.pbl image, both the
CONFIG_PBLPBI_CONFIG and CONFIG_PBLRCW_CONFIG variables have to be
defined.
This patch sets these two files for the P2041RDB board.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Valentin Longchamp [Fri, 4 Jan 2013 04:06:16 +0000 (04:06 +0000)]
powerpc/p2041: add RCW file for P2041RDB
All the dev boards of Freescale's QorIQ family have a RCW that is
supported by the u-boot.pbl build target. This patch adds one for the
P2041 dev board.
This RCW is suitable for the RAMBOOT_PBL scenarios and was tested on the
P2041RDB booting from the eSPI NOR Flash (P2041RDB_SPIFLASH config).
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Prabhakar Kushwaha [Sun, 23 Dec 2012 19:26:03 +0000 (19:26 +0000)]
powerpc/t4240qds: Print FPGA detail version
Qixis FPGA has tag data contains image name and build date.
It is helpful to identify the FPGA image precisely.
Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Shaveta Leekha [Sun, 23 Dec 2012 19:25:50 +0000 (19:25 +0000)]
powerpc/t4240qds: Add support to dump switch settings on t4240qds board
This function is called by "qixis_reset switch" command and
switch settings are calculated from qixis FPGA registers.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>