Alexander Aring [Fri, 29 Apr 2022 15:06:51 +0000 (11:06 -0400)]
dlm: fix missing lkb refcount handling
commit
1689c169134f4b5a39156122d799b7dca76d8ddb upstream.
We always call hold_lkb(lkb) if we increment lkb->lkb_wait_count.
So, we always need to call unhold_lkb(lkb) if we decrement
lkb->lkb_wait_count. This patch will add missing unhold_lkb(lkb) if we
decrement lkb->lkb_wait_count. In case of setting lkb->lkb_wait_count to
zero we need to countdown until reaching zero and call unhold_lkb(lkb).
The waiters list unhold_lkb(lkb) can be removed because it's done for
the last lkb_wait_count decrement iteration as it's done in
_remove_from_waiters().
This issue was discovered by a dlm gfs2 test case which use excessively
dlm_unlock(LKF_CANCEL) feature. Probably the lkb->lkb_wait_count value
never reached above 1 if this feature isn't used and so it was not
discovered before.
The testcase ended in a rsb on the rsb keep data structure with a
refcount of 1 but no lkb was associated with it, which is itself
an invalid behaviour. A side effect of that was a condition in which
the dlm was sending remove messages in a looping behaviour. With this
patch that has not been reproduced.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 4 Apr 2022 20:06:28 +0000 (16:06 -0400)]
dlm: uninitialized variable on error in dlm_listen_for_all()
commit
1f4f10845e14690b02410de50d9ea9684625a4ae upstream.
The "sock" variable is not initialized on this error path.
Cc: stable@vger.kernel.org
Fixes:
2dc6b1158c28 ("fs: dlm: introduce generic listen")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Aring [Mon, 4 Apr 2022 20:06:30 +0000 (16:06 -0400)]
dlm: fix plock invalid read
commit
42252d0d2aa9b94d168241710a761588b3959019 upstream.
This patch fixes an invalid read showed by KASAN. A unlock will allocate a
"struct plock_op" and a followed send_op() will append it to a global
send_list data structure. In some cases a followed dev_read() moves it
to recv_list and dev_write() will cast it to "struct plock_xop" and access
fields which are only available in those structures. At this point an
invalid read happens by accessing those fields.
To fix this issue the "callback" field is moved to "struct plock_op" to
indicate that a cast to "plock_xop" is allowed and does the additional
"plock_xop" handling if set.
Example of the KASAN output which showed the invalid read:
[ 2064.296453] ==================================================================
[ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm]
[ 2064.306491] Read of size 8 at addr
ffff88800ef227d8 by task dlm_controld/7484
[ 2064.308168]
[ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9
[ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 2064.311618] Call Trace:
[ 2064.312218] dump_stack_lvl+0x56/0x7b
[ 2064.313150] print_address_description.constprop.8+0x21/0x150
[ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.316595] kasan_report.cold.14+0x7f/0x11b
[ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm]
[ 2064.318687] dev_write+0x52b/0x5a0 [dlm]
[ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm]
[ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10
[ 2064.321926] vfs_write+0x17e/0x930
[ 2064.322769] ? __fget_light+0x1aa/0x220
[ 2064.323753] ksys_write+0xf1/0x1c0
[ 2064.324548] ? __ia32_sys_read+0xb0/0xb0
[ 2064.325464] do_syscall_64+0x3a/0x80
[ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2064.327606] RIP: 0033:0x7f807e4ba96f
[ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48
[ 2064.332902] RSP: 002b:
00007ffd50cfe6e0 EFLAGS:
00000293 ORIG_RAX:
0000000000000001
[ 2064.334658] RAX:
ffffffffffffffda RBX:
000055cc3886eb30 RCX:
00007f807e4ba96f
[ 2064.336275] RDX:
0000000000000040 RSI:
00007ffd50cfe7e0 RDI:
0000000000000010
[ 2064.337980] RBP:
00007ffd50cfe7e0 R08:
0000000000000000 R09:
0000000000000001
[ 2064.339560] R10:
000055cc3886eb30 R11:
0000000000000293 R12:
000055cc3886eb80
[ 2064.341237] R13:
000055cc3886eb00 R14:
000055cc3886f590 R15:
0000000000000001
[ 2064.342857]
[ 2064.343226] Allocated by task 12438:
[ 2064.344057] kasan_save_stack+0x1c/0x40
[ 2064.345079] __kasan_kmalloc+0x84/0xa0
[ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220
[ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm]
[ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0
[ 2064.351070] fcntl_setlk+0x281/0xbc0
[ 2064.352879] do_fcntl+0x5e4/0xfe0
[ 2064.354657] __x64_sys_fcntl+0x11f/0x170
[ 2064.356550] do_syscall_64+0x3a/0x80
[ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2064.360745]
[ 2064.361511] Last potentially related work creation:
[ 2064.363957] kasan_save_stack+0x1c/0x40
[ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0
[ 2064.368100] call_rcu+0x11b/0xf70
[ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm]
[ 2064.372404] receive_from_sock+0x290/0x770 [dlm]
[ 2064.374607] process_recv_sockets+0x32/0x40 [dlm]
[ 2064.377290] process_one_work+0x9a8/0x16e0
[ 2064.379357] worker_thread+0x87/0xbf0
[ 2064.381188] kthread+0x3ac/0x490
[ 2064.383460] ret_from_fork+0x22/0x30
[ 2064.385588]
[ 2064.386518] Second to last potentially related work creation:
[ 2064.389219] kasan_save_stack+0x1c/0x40
[ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0
[ 2064.393303] call_rcu+0x11b/0xf70
[ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm]
[ 2064.397694] receive_from_sock+0x290/0x770 [dlm]
[ 2064.399932] process_recv_sockets+0x32/0x40 [dlm]
[ 2064.402180] process_one_work+0x9a8/0x16e0
[ 2064.404388] worker_thread+0x87/0xbf0
[ 2064.406124] kthread+0x3ac/0x490
[ 2064.408021] ret_from_fork+0x22/0x30
[ 2064.409834]
[ 2064.410599] The buggy address belongs to the object at
ffff88800ef22780
[ 2064.410599] which belongs to the cache kmalloc-96 of size 96
[ 2064.416495] The buggy address is located 88 bytes inside of
[ 2064.416495] 96-byte region [
ffff88800ef22780,
ffff88800ef227e0)
[ 2064.422045] The buggy address belongs to the page:
[ 2064.424635] page:
00000000b6bef8bc refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0xef22
[ 2064.428970] flags: 0xfffffc0000200(slab|node=0|zone=1|lastcpupid=0x1fffff)
[ 2064.432515] raw:
000fffffc0000200 ffffea0000d68b80 0000001400000014 ffff888001041780
[ 2064.436110] raw:
0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[ 2064.439813] page dumped because: kasan: bad access detected
[ 2064.442548]
[ 2064.443310] Memory state around the buggy address:
[ 2064.445988]
ffff88800ef22680: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2064.449444]
ffff88800ef22700: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2064.452941] >
ffff88800ef22780: 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc
[ 2064.456383] ^
[ 2064.459386]
ffff88800ef22800: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc
[ 2064.462788]
ffff88800ef22880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
[ 2064.466239] ==================================================================
reproducer in python:
import argparse
import struct
import fcntl
import os
parser = argparse.ArgumentParser()
parser.add_argument('-f', '--file',
help='file to use fcntl, must be on dlm lock filesystem e.g. gfs2')
args = parser.parse_args()
f = open(args.file, 'wb+')
lockdata = struct.pack('hhllhh', fcntl.F_WRLCK,0,0,0,0,0)
fcntl.fcntl(f, fcntl.F_SETLK, lockdata)
lockdata = struct.pack('hhllhh', fcntl.F_UNLCK,0,0,0,0,0)
fcntl.fcntl(f, fcntl.F_SETLK, lockdata)
Fixes:
586759f03e2e ("gfs2: nfs lock support for gfs2")
Cc: stable@vger.kernel.org
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Schnelle [Tue, 3 May 2022 07:58:33 +0000 (09:58 +0200)]
s390/stp: clock_delta should be signed
commit
5ace65ebb5ce9fe1cc8fdbdd97079fb566ef0ea4 upstream.
clock_delta is declared as unsigned long in various places. However,
the clock sync delta can be negative. This would add a huge positive
offset in clock_sync_global where clock_delta is added to clk.eitod
which is a 72 bit integer. Declare it as signed long to fix this.
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nico Boehr [Tue, 24 May 2022 13:43:20 +0000 (15:43 +0200)]
s390/perf: obtain sie_block from the right address
commit
c9bfb460c3e4da2462e16b0f0b200990b36b1dd2 upstream.
Since commit
1179f170b6f0 ("s390: fix fpu restore in entry.S"), the
sie_block pointer is located at empty1[1], but in sie_block() it was
taken from empty1[0].
This leads to a random pointer being dereferenced, possibly causing
system crash.
This problem can be observed when running a simple guest with an endless
loop and recording the cpu-clock event:
sudo perf kvm --guestvmlinux=<guestkernel> --guest top -e cpu-clock
With this fix, the correct guest address is shown.
Fixes:
1179f170b6f0 ("s390: fix fpu restore in entry.S")
Cc: stable@vger.kernel.org
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rei Yamamoto [Fri, 13 May 2022 23:48:57 +0000 (16:48 -0700)]
mm, compaction: fast_find_migrateblock() should return pfn in the target zone
commit
bbe832b9db2e1ad21522f8f0bf02775fff8a0e0e upstream.
At present, pages not in the target zone are added to cc->migratepages
list in isolate_migratepages_block(). As a result, pages may migrate
between nodes unintentionally.
This would be a serious problem for older kernels without commit
a984226f457f849e ("mm: memcontrol: remove the pgdata parameter of
mem_cgroup_page_lruvec"), because it can corrupt the lru list by
handling pages in list without holding proper lru_lock.
Avoid returning a pfn outside the target zone in the case that it is
not aligned with a pageblock boundary. Otherwise
isolate_migratepages_block() will handle pages not in the target zone.
Link: https://lkml.kernel.org/r/20220511044300.4069-1-yamamoto.rei@jp.fujitsu.com
Fixes:
70b44595eafe ("mm, compaction: use free lists to quickly locate a migration source")
Signed-off-by: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Wonhyuk Yang <vvghjk1234@gmail.com>
Cc: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Denis Efremov [Wed, 18 May 2022 07:00:52 +0000 (11:00 +0400)]
staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan()
commit
bc10916e890948d8927a5c8c40fb5dc44be5e1b8 upstream.
This code has a check to prevent read overflow but it needs another
check to prevent writing beyond the end of the ->Ssid[] array.
Fixes:
2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Denis Efremov <denis.e.efremov@oracle.com>
Link: https://lore.kernel.org/r/20220518070052.108287-1-denis.e.efremov@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Fri, 1 Apr 2022 13:38:54 +0000 (15:38 +0200)]
PCI: qcom: Fix unbalanced PHY init on probe errors
commit
83013631f0f9961416abd812e228c8efbc2f6069 upstream.
Undo the PHY initialisation (e.g. balance runtime PM) if host
initialisation fails during probe.
Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org
Fixes:
82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.5
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Fri, 1 Apr 2022 13:38:53 +0000 (15:38 +0200)]
PCI: qcom: Fix runtime PM imbalance on probe errors
commit
87d83b96c8d6c6c2d2096bd0bdba73bcf42b8ef0 upstream.
Drop the leftover pm_runtime_disable() calls from the late probe error
paths that would, for example, prevent runtime PM from being reenabled
after a probe deferral.
Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org
Fixes:
6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.20
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bjorn Helgaas [Thu, 26 May 2022 21:52:23 +0000 (16:52 -0500)]
PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299
commit
12068bb346db5776d0ec9bb4cd073f8427a1ac92 upstream.
92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted
braces around the new Elo i2 entry, so it overwrote the existing Gigabyte
X299 entry. Add the appropriate braces.
Found by:
$ make W=1 drivers/pci/pci.o
CC drivers/pci/pci.o
drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init]
2974 | .ident = "Elo i2",
| ^~~~~~~~
Link: https://lore.kernel.org/r/20220526221258.GA409855@bhelgaas
Fixes:
92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Wed, 25 May 2022 03:23:59 +0000 (23:23 -0400)]
drm/amdgpu: add beige goby PCI ID
commit
62e9bd20035b53ff6c679499c08546d96c6c60a7 upstream.
Add a beige goby PCI ID.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gautam Menghani [Sun, 22 May 2022 06:18:26 +0000 (23:18 -0700)]
tracing: Initialize integer variable to prevent garbage return value
commit
154827f8e53d8c492b3fb0cb757fbcadb5d516b5 upstream.
Initialize the integer variable to 0 to fix the clang scan warning:
Undefined or garbage value returned to caller
[core.uninitialized.UndefReturn]
return ret;
Link: https://lkml.kernel.org/r/20220522061826.1751-1-gautammenghani201@gmail.com
Cc: stable@vger.kernel.org
Fixes:
8993665abcce ("tracing/boot: Support multiple handlers for per-event histogram")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keita Suzuki [Mon, 25 Apr 2022 06:37:38 +0000 (06:37 +0000)]
tracing: Fix potential double free in create_var_ref()
commit
99696a2592bca641eb88cc9a80c90e591afebd0f upstream.
In create_var_ref(), init_var_ref() is called to initialize the fields
of variable ref_field, which is allocated in the previous function call
to create_hist_field(). Function init_var_ref() allocates the
corresponding fields such as ref_field->system, but frees these fields
when the function encounters an error. The caller later calls
destroy_hist_field() to conduct error handling, which frees the fields
and the variable itself. This results in double free of the fields which
are already freed in the previous function.
Fix this by storing NULL to the corresponding fields when they are freed
in init_var_ref().
Link: https://lkml.kernel.org/r/20220425063739.3859998-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Fixes:
067fe038e70f ("tracing: Add variable reference handling to hist triggers")
CC: stable@vger.kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laurent Vivier [Wed, 6 Apr 2022 20:15:20 +0000 (22:15 +0200)]
tty: goldfish: Introduce gf_ioread32()/gf_iowrite32()
commit
2e2ac4a3327479f7e2744cdd88a5c823f2057bad upstream.
The goldfish TTY device was clearly defined as having little-endian
registers, but the switch to __raw_{read,write}l(() broke its driver
when running on big-endian kernels (if anyone ever tried this).
The m68k qemu implementation got this wrong, and assumed native-endian
registers. While this is a bug in qemu, it is probably impossible to
fix that since there is no way of knowing which other operating systems
have started relying on that bug over the years.
Hence revert commit
da31de35cd2f ("tty: goldfish: use
__raw_writel()/__raw_readl()", and define gf_ioread32()/gf_iowrite32()
to be able to use accessors defined by the architecture.
Cc: stable@vger.kernel.org # v5.11+
Fixes:
da31de35cd2fb78f ("tty: goldfish: use __raw_writel()/__raw_readl()")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Link: https://lore.kernel.org/r/20220406201523.243733-2-laurent@vivier.eu
[geert: Add rationale based on Arnd's comments]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sakari Ailus [Wed, 6 Apr 2022 13:12:08 +0000 (16:12 +0300)]
ACPI: property: Release subnode properties with data nodes
commit
3bd561e1572ee02a50cd1a5be339abf1a5b78d56 upstream.
struct acpi_device_properties describes one source of properties present
on either struct acpi_device or struct acpi_data_node. When properties are
parsed, both are populated but when released, only those properties that
are associated with the device node are freed.
Fix this by also releasing memory of the data node properties.
Fixes:
5f5e4890d57a ("ACPI / property: Allow multiple property compatible _DSD entries")
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Wed, 18 May 2022 09:33:29 +0000 (11:33 +0200)]
ext4: avoid cycles in directory h-tree
commit
3ba733f879c2a88910744647e41edeefbc0d92b2 upstream.
A maliciously corrupted filesystem can contain cycles in the h-tree
stored inside a directory. That can easily lead to the kernel corrupting
tree nodes that were already verified under its hands while doing a node
split and consequently accessing unallocated memory. Fix the problem by
verifying traversed block numbers are unique.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518093332.13986-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Wed, 18 May 2022 09:33:28 +0000 (11:33 +0200)]
ext4: verify dir block before splitting it
commit
46c116b920ebec58031f0a78c5ea9599b0d2a371 upstream.
Before splitting a directory block verify its directory entries are sane
so that the splitting code does not access memory it should not.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518093332.13986-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Wed, 18 May 2022 12:08:16 +0000 (20:08 +0800)]
ext4: fix bug_on in __es_tree_search
commit
d36f6ed761b53933b0b4126486c10d3da7751e7f upstream.
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/extents_status.c:199!
[...]
RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline]
RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217
[...]
Call Trace:
ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766
ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561
ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964
ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384
ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567
ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980
ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031
ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257
v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63
v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82
vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368
dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490
ext4_quota_enable fs/ext4/super.c:6137 [inline]
ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163
ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754
mount_bdev+0x2e9/0x3b0 fs/super.c:1158
mount_fs+0x4b/0x1e4 fs/super.c:1261
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_enable_quotas
ext4_quota_enable
ext4_iget
__ext4_iget
ext4_ext_check_inode
ext4_ext_check
__ext4_ext_check
ext4_valid_extent_entries
Check for overlapping extents does't take effect
dquot_enable
vfs_load_quota_inode
v2_check_quota_file
v2_read_header
ext4_quota_read
ext4_bread
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_find_extent
ext4_cache_extents
ext4_es_cache_extent
ext4_es_cache_extent
__es_tree_search
ext4_es_end
BUG_ON(es->es_lblk + es->es_len < es->es_lblk)
The error ext4 extents is as follows:
0af3 0300 0400 0000
00000000 extent_header
00000000 0100 0000
12000000 extent1
00000000 0100 0000
18000000 extent2
02000000 0400 0000
14000000 extent3
In the ext4_valid_extent_entries function,
if prev is 0, no error is returned even if lblock<=prev.
This was intended to skip the check on the first extent, but
in the error image above, prev=0+1-1=0 when checking the second extent,
so even though lblock<=prev, the function does not return an error.
As a result, bug_ON occurs in __es_tree_search and the system panics.
To solve this problem, we only need to check that:
1. The lblock of the first extent is not less than 0.
2. The lblock of the next extent is not less than
the next block of the previous extent.
The same applies to extent_idx.
Cc: stable@kernel.org
Fixes:
5946d089379a ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518120816.1541863-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 17 May 2022 17:27:55 +0000 (13:27 -0400)]
ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state
commit
c878bea3c9d724ddfa05a813f30de3d25a0ba83f upstream.
The EXT4_FC_REPLAY bit in sbi->s_mount_state is used to indicate that
we are in the middle of replay the fast commit journal. This was
actually a mistake, since the sbi->s_mount_info is initialized from
es->s_state. Arguably s_mount_state is misleadingly named, but the
name is historical --- s_mount_state and s_state dates back to ext2.
What should have been used is the ext4_{set,clear,test}_mount_flag()
inline functions, which sets EXT4_MF_* bits in sbi->s_mount_flags.
The problem with using EXT4_FC_REPLAY is that a maliciously corrupted
superblock could result in EXT4_FC_REPLAY getting set in
s_mount_state. This bypasses some sanity checks, and this can trigger
a BUG() in ext4_es_cache_extent(). As a easy-to-backport-fix, filter
out the EXT4_FC_REPLAY bit for now. We should eventually transition
away from EXT4_FC_REPLAY to something like EXT4_MF_REPLAY.
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20220420192312.1655305-1-phind.uet@gmail.com
Link: https://lore.kernel.org/r/20220517174028.942119-1-tytso@mit.edu
Reported-by: syzbot+c7358a3cd05ee786eb31@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Mon, 16 May 2022 12:26:34 +0000 (20:26 +0800)]
ext4: fix bug_on in ext4_writepages
commit
ef09ed5d37b84d18562b30cf7253e57062d0db05 upstream.
we got issue as follows:
EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls
------------[ cut here ]------------
kernel BUG at fs/ext4/inode.c:2708!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-
20220413+ #155
RIP: 0010:ext4_writepages+0x1977/0x1c10
RSP: 0018:
ffff88811d3e7880 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
0000000000000001 RCX:
ffff88811c098000
RDX:
0000000000000000 RSI:
ffff88811c098000 RDI:
0000000000000002
RBP:
ffff888128140f50 R08:
ffffffffb1ff6387 R09:
0000000000000000
R10:
0000000000000007 R11:
ffffed10250281ea R12:
0000000000000001
R13:
00000000000000a4 R14:
ffff88811d3e7bb8 R15:
ffff888128141028
FS:
00007f443aed9740(0000) GS:
ffff8883aef00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020007200 CR3:
000000011c2a4000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
do_writepages+0x130/0x3a0
filemap_fdatawrite_wbc+0x83/0xa0
filemap_flush+0xab/0xe0
ext4_alloc_da_blocks+0x51/0x120
__ext4_ioctl+0x1534/0x3210
__x64_sys_ioctl+0x12c/0x170
do_syscall_64+0x3b/0x90
It may happen as follows:
1. write inline_data inode
vfs_write
new_sync_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
ext4_da_write_inline_data_begin -> If inline data size too
small will allocate block to write, then mapping will has
dirty page
ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA
2. fallocate
do_vfs_ioctl
ioctl_preallocate
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_map_blocks -> fail will goto restore data
ext4_restore_inline_data
ext4_create_inline_data
ext4_write_inline_data
ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA
3. writepages
__ext4_ioctl
ext4_alloc_da_blocks
filemap_flush
filemap_fdatawrite_wbc
do_writepages
ext4_writepages
if (ext4_has_inline_data(inode))
BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))
The root cause of this issue is we destory inline data until call
ext4_writepages under delay allocation mode. But there maybe already
convert from inline to extent. To solve this issue, we call
filemap_flush first..
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220516122634.1690462-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Sat, 26 Mar 2022 06:53:51 +0000 (14:53 +0800)]
ext4: fix warning in ext4_handle_inode_extension
commit
f4534c9fc94d22383f187b9409abb3f9df2e3db3 upstream.
We got issue as follows:
EXT4-fs error (device loop0) in ext4_reserve_inode_write:5741: Out of memory
EXT4-fs error (device loop0): ext4_setattr:5462: inode #13: comm syz-executor.0: mark_inode_dirty error
EXT4-fs error (device loop0) in ext4_setattr:5519: Out of memory
EXT4-fs error (device loop0): ext4_ind_map_blocks:595: inode #13: comm syz-executor.0: Can't allocate blocks for non-extent mapped inodes with bigalloc
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4361 at fs/ext4/file.c:301 ext4_file_write_iter+0x11c9/0x1220
Modules linked in:
CPU: 1 PID: 4361 Comm: syz-executor.0 Not tainted 5.10.0+ #1
RIP: 0010:ext4_file_write_iter+0x11c9/0x1220
RSP: 0018:
ffff924d80b27c00 EFLAGS:
00010282
RAX:
ffffffff815a3379 RBX:
0000000000000000 RCX:
000000003b000000
RDX:
ffff924d81601000 RSI:
00000000000009cc RDI:
00000000000009cd
RBP:
000000000000000d R08:
ffffffffbc5a2c6b R09:
0000902e0e52a96f
R10:
ffff902e2b7c1b40 R11:
ffff902e2b7c1b40 R12:
000000000000000a
R13:
0000000000000001 R14:
ffff902e0e52aa10 R15:
ffffffffffffff8b
FS:
00007f81a7f65700(0000) GS:
ffff902e3bc80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffff600400 CR3:
000000012db88001 CR4:
00000000003706e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
do_iter_readv_writev+0x2e5/0x360
do_iter_write+0x112/0x4c0
do_pwritev+0x1e5/0x390
__x64_sys_pwritev2+0x7e/0xa0
do_syscall_64+0x37/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Above issue may happen as follows:
Assume
inode.i_size=4096
EXT4_I(inode)->i_disksize=4096
step 1: set inode->i_isize = 8192
ext4_setattr
if (attr->ia_size != inode->i_size)
EXT4_I(inode)->i_disksize = attr->ia_size;
rc = ext4_mark_inode_dirty
ext4_reserve_inode_write
ext4_get_inode_loc
__ext4_get_inode_loc
sb_getblk --> return -ENOMEM
...
if (!error) ->will not update i_size
i_size_write(inode, attr->ia_size);
Now:
inode.i_size=4096
EXT4_I(inode)->i_disksize=8192
step 2: Direct write 4096 bytes
ext4_file_write_iter
ext4_dio_write_iter
iomap_dio_rw ->return error
if (extend)
ext4_handle_inode_extension
WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize);
->Then trigger warning.
To solve above issue, if mark inode dirty failed in ext4_setattr just
set 'EXT4_I(inode)->i_disksize' with old value.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20220326065351.761952-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Thu, 28 Apr 2022 13:40:31 +0000 (21:40 +0800)]
ext4: fix race condition between ext4_write and ext4_convert_inline_data
commit
f87c7a4b084afc13190cbb263538e444cb2b392a upstream.
Hulk Robot reported a BUG_ON:
==================================================================
EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0,
block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters
kernel BUG at fs/ext4/ext4_jbd2.c:53!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1
RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline]
RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116
[...]
Call Trace:
ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795
generic_perform_write+0x279/0x3c0 mm/filemap.c:3344
ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270
ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520
do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732
do_iter_write+0x107/0x430 fs/read_write.c:861
vfs_writev fs/read_write.c:934 [inline]
do_pwritev+0x1e5/0x380 fs/read_write.c:1031
[...]
==================================================================
Above issue may happen as follows:
cpu1 cpu2
__________________________|__________________________
do_pwritev
vfs_writev
do_iter_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_destroy_inline_data_nolock
clear EXT4_STATE_MAY_INLINE_DATA
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
ext4_mb_regular_allocator
ext4_mb_good_group_nolock
ext4_mb_init_group
ext4_mb_init_cache
ext4_mb_generate_buddy --> error
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_restore_inline_data
set EXT4_STATE_MAY_INLINE_DATA
ext4_block_write_begin
ext4_da_write_end
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_write_inline_data_end
handle=NULL
ext4_journal_stop(handle)
__ext4_journal_stop
ext4_put_nojournal(handle)
ref_cnt = (unsigned long)handle
BUG_ON(ref_cnt == 0) ---> BUG_ON
The lock held by ext4_convert_inline_data is xattr_sem, but the lock
held by generic_perform_write is i_rwsem. Therefore, the two locks can
be concurrent.
To solve above issue, we add inode_lock() for ext4_convert_inline_data().
At the same time, move ext4_convert_inline_data() in front of
ext4_punch_hole(), remove similar handling from ext4_punch_hole().
Fixes:
0c8d414f163f ("ext4: let fallocate handle inline data correctly")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220428134031.4153381-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Bin [Thu, 14 Apr 2022 02:52:23 +0000 (10:52 +0800)]
ext4: fix use-after-free in ext4_rename_dir_prepare
commit
0be698ecbe4471fcad80e81ec6a05001421041b3 upstream.
We got issue as follows:
EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue
ext4_get_first_dir_block: bh->b_data=0xffff88810bee6000 len=34478
ext4_get_first_dir_block: *parent_de=0xffff88810beee6ae bh->b_data=0xffff88810bee6000
ext4_rename_dir_prepare: [1] parent_de=0xffff88810beee6ae
==================================================================
BUG: KASAN: use-after-free in ext4_rename_dir_prepare+0x152/0x220
Read of size 4 at addr
ffff88810beee6ae by task rep/1895
CPU: 13 PID: 1895 Comm: rep Not tainted 5.10.0+ #241
Call Trace:
dump_stack+0xbe/0xf9
print_address_description.constprop.0+0x1e/0x220
kasan_report.cold+0x37/0x7f
ext4_rename_dir_prepare+0x152/0x220
ext4_rename+0xf44/0x1ad0
ext4_rename2+0x11c/0x170
vfs_rename+0xa84/0x1440
do_renameat2+0x683/0x8f0
__x64_sys_renameat+0x53/0x60
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f45a6fc41c9
RSP: 002b:
00007ffc5a470218 EFLAGS:
00000246 ORIG_RAX:
0000000000000108
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f45a6fc41c9
RDX:
0000000000000005 RSI:
0000000020000180 RDI:
0000000000000005
RBP:
00007ffc5a470240 R08:
00007ffc5a470160 R09:
0000000020000080
R10:
00000000200001c0 R11:
0000000000000246 R12:
0000000000400bb0
R13:
00007ffc5a470320 R14:
0000000000000000 R15:
0000000000000000
The buggy address belongs to the page:
page:
00000000440015ce refcount:0 mapcount:0 mapping:
0000000000000000 index:0x1 pfn:0x10beee
flags: 0x200000000000000()
raw:
0200000000000000 ffffea00043ff4c8 ffffea0004325608 0000000000000000
raw:
0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88810beee580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88810beee600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>
ffff88810beee680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88810beee700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88810beee780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
Disabling lock debugging due to kernel taint
ext4_rename_dir_prepare: [2] parent_de->inode=
3537895424
ext4_rename_dir_prepare: [3] dir=0xffff888124170140
ext4_rename_dir_prepare: [4] ino=2
ext4_rename_dir_prepare: ent->dir->i_ino=2 parent=-
757071872
Reason is first directory entry which 'rec_len' is 34478, then will get illegal
parent entry. Now, we do not check directory entry after read directory block
in 'ext4_get_first_dir_block'.
To solve this issue, check directory entry in 'ext4_get_first_dir_block'.
[ Trigger an ext4_error() instead of just warning if the directory is
missing a '.' or '..' entry. Also make sure we return an error code
if the file system is corrupted. -TYT ]
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220414025223.4113128-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Monakhov [Sun, 17 Apr 2022 17:03:15 +0000 (20:03 +0300)]
ext4: mark group as trimmed only if it was fully scanned
commit
d63c00ea435a5352f486c259665a4ced60399421 upstream.
Otherwise nonaligned fstrim calls will works inconveniently for iterative
scanners, for example:
// trim [0,16MB] for group-1, but mark full group as trimmed
fstrim -o $((1024*1024*128)) -l $((1024*1024*16)) ./m
// handle [16MB,16MB] for group-1, do nothing because group already has the flag.
fstrim -o $((1024*1024*144)) -l $((1024*1024*16)) ./m
[ Update function documentation for ext4_trim_all_free -- TYT ]
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Link: https://lore.kernel.org/r/1650214995-860245-1-git-send-email-dmtrmonakhov@yandex-team.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 1 Apr 2022 10:27:50 +0000 (12:27 +0200)]
bfq: Make sure bfqg for which we are queueing requests is online
commit
075a53b78b815301f8d3dd1ee2cd99554e34f0dd upstream.
Bios queued into BFQ IO scheduler can be associated with a cgroup that
was already offlined. This may then cause insertion of this bfq_group
into a service tree. But this bfq_group will get freed as soon as last
bio associated with it is completed leading to use after free issues for
service tree users. Fix the problem by making sure we always operate on
online bfq_group. If the bfq_group associated with the bio is not
online, we pick the first online parent.
CC: stable@vger.kernel.org
Fixes:
e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-9-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 1 Apr 2022 10:27:49 +0000 (12:27 +0200)]
bfq: Get rid of __bio_blkcg() usage
commit
4e54a2493e582361adc3bfbf06c7d50d19d18837 upstream.
BFQ usage of __bio_blkcg() is a relict from the past. Furthermore if bio
would not be associated with any blkcg, the usage of __bio_blkcg() in
BFQ is prone to races with the task being migrated between cgroups as
__bio_blkcg() calls at different places could return different blkcgs.
Convert BFQ to the new situation where bio->bi_blkg is initialized in
bio_set_dev() and thus practically always valid. This allows us to save
blkcg_gq lookup and noticeably simplify the code.
CC: stable@vger.kernel.org
Fixes:
0fe061b9f03c ("blkcg: fix ref count issue with bio_blkcg() using task_css")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-8-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 1 Apr 2022 10:27:48 +0000 (12:27 +0200)]
bfq: Track whether bfq_group is still online
commit
09f871868080c33992cd6a9b72a5ca49582578fa upstream.
Track whether bfq_group is still online. We cannot rely on
blkcg_gq->online because that gets cleared only after all policies are
offlined and we need something that gets updated already under
bfqd->lock when we are cleaning up our bfq_group to be able to guarantee
that when we see online bfq_group, it will stay online while we are
holding bfqd->lock lock.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-7-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 1 Apr 2022 10:27:47 +0000 (12:27 +0200)]
bfq: Remove pointless bfq_init_rq() calls
commit
5f550ede5edf846ecc0067be1ba80514e6fe7f8e upstream.
We call bfq_init_rq() from request merging functions where requests we
get should have already gone through bfq_init_rq() during insert and
anyway we want to do anything only if the request is already tracked by
BFQ. So replace calls to bfq_init_rq() with RQ_BFQQ() instead to simply
skip requests untracked by BFQ. We move bfq_init_rq() call in
bfq_insert_request() a bit earlier to cover request merging and thus
can transfer FIFO position in case of a merge.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-6-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 1 Apr 2022 10:27:46 +0000 (12:27 +0200)]
bfq: Drop pointless unlock-lock pair
commit
fc84e1f941b91221092da5b3102ec82da24c5673 upstream.
In bfq_insert_request() we unlock bfqd->lock only to call
trace_block_rq_insert() and then lock bfqd->lock again. This is really
pointless since tracing is disabled if we really care about performance
and even if the tracepoint is enabled, it is a quick call.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-5-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 1 Apr 2022 10:27:45 +0000 (12:27 +0200)]
bfq: Update cgroup information before merging bio
commit
ea591cd4eb270393810e7be01feb8fde6a34fbbe upstream.
When the process is migrated to a different cgroup (or in case of
writeback just starts submitting bios associated with a different
cgroup) bfq_merge_bio() can operate with stale cgroup information in
bic. Thus the bio can be merged to a request from a different cgroup or
it can result in merging of bfqqs for different cgroups or bfqqs of
already dead cgroups and causing possible use-after-free issues. Fix the
problem by updating cgroup information in bfq_merge_bio().
CC: stable@vger.kernel.org
Fixes:
e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-4-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 1 Apr 2022 10:27:44 +0000 (12:27 +0200)]
bfq: Split shared queues on move between cgroups
commit
3bc5e683c67d94bd839a1da2e796c15847b51b69 upstream.
When bfqq is shared by multiple processes it can happen that one of the
processes gets moved to a different cgroup (or just starts submitting IO
for different cgroup). In case that happens we need to split the merged
bfqq as otherwise we will have IO for multiple cgroups in one bfqq and
we will just account IO time to wrong entities etc.
Similarly if the bfqq is scheduled to merge with another bfqq but the
merge didn't happen yet, cancel the merge as it need not be valid
anymore.
CC: stable@vger.kernel.org
Fixes:
e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 1 Apr 2022 10:27:43 +0000 (12:27 +0200)]
bfq: Avoid merging queues with different parents
commit
c1cee4ab36acef271be9101590756ed0c0c374d9 upstream.
It can happen that the parent of a bfqq changes between the moment we
decide two queues are worth to merge (and set bic->stable_merge_bfqq)
and the moment bfq_setup_merge() is called. This can happen e.g. because
the process submitted IO for a different cgroup and thus bfqq got
reparented. It can even happen that the bfqq we are merging with has
parent cgroup that is already offline and going to be destroyed in which
case the merge can lead to use-after-free issues such as:
BUG: KASAN: use-after-free in __bfq_deactivate_entity+0x9cb/0xa50
Read of size 8 at addr
ffff88800693c0c0 by task runc:[2:INIT]/10544
CPU: 0 PID: 10544 Comm: runc:[2:INIT] Tainted: G E 5.15.2-0.g5fb85fd-default #1 openSUSE Tumbleweed (unreleased)
f1f3b891c72369aebecd2e43e4641a6358867c70
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x46/0x5a
print_address_description.constprop.0+0x1f/0x140
? __bfq_deactivate_entity+0x9cb/0xa50
kasan_report.cold+0x7f/0x11b
? __bfq_deactivate_entity+0x9cb/0xa50
__bfq_deactivate_entity+0x9cb/0xa50
? update_curr+0x32f/0x5d0
bfq_deactivate_entity+0xa0/0x1d0
bfq_del_bfqq_busy+0x28a/0x420
? resched_curr+0x116/0x1d0
? bfq_requeue_bfqq+0x70/0x70
? check_preempt_wakeup+0x52b/0xbc0
__bfq_bfqq_expire+0x1a2/0x270
bfq_bfqq_expire+0xd16/0x2160
? try_to_wake_up+0x4ee/0x1260
? bfq_end_wr_async_queues+0xe0/0xe0
? _raw_write_unlock_bh+0x60/0x60
? _raw_spin_lock_irq+0x81/0xe0
bfq_idle_slice_timer+0x109/0x280
? bfq_dispatch_request+0x4870/0x4870
__hrtimer_run_queues+0x37d/0x700
? enqueue_hrtimer+0x1b0/0x1b0
? kvm_clock_get_cycles+0xd/0x10
? ktime_get_update_offsets_now+0x6f/0x280
hrtimer_interrupt+0x2c8/0x740
Fix the problem by checking that the parent of the two bfqqs we are
merging in bfq_setup_merge() is the same.
Link: https://lore.kernel.org/linux-block/20211125172809.GC19572@quack2.suse.cz/
CC: stable@vger.kernel.org
Fixes:
430a67f9d616 ("block, bfq: merge bursts of newly-created queues")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 1 Apr 2022 10:27:42 +0000 (12:27 +0200)]
bfq: Avoid false marking of bic as stably merged
commit
70456e5210f40ffdb8f6d905acfdcec5bd5fad9e upstream.
bfq_setup_cooperator() can mark bic as stably merged even though it
decides to not merge its bfqqs (when bfq_setup_merge() returns NULL).
Make sure to mark bic as stably merged only if we are really going to
merge bfqqs.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Fixes:
430a67f9d616 ("block, bfq: merge bursts of newly-created queues")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aditya Garg [Fri, 15 Apr 2022 17:02:46 +0000 (17:02 +0000)]
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
commit
155ca952c7ca19aa32ecfb7373a32bbc2e1ec6eb upstream.
On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables
at early boot to load UEFI Secure Boot certificates, a page fault occurs
in Apple firmware code and EFI runtime services are disabled with the
following logs:
[Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000
WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0
(Removed some logs from here)
Call Trace:
<TASK>
page_fault_oops+0x4f/0x2c0
? search_bpf_extables+0x6b/0x80
? search_module_extables+0x50/0x80
? search_exception_tables+0x5b/0x60
kernelmode_fixup_or_oops+0x9e/0x110
__bad_area_nosemaphore+0x155/0x190
bad_area_nosemaphore+0x16/0x20
do_kern_addr_fault+0x8c/0xa0
exc_page_fault+0xd8/0x180
asm_exc_page_fault+0x1e/0x30
(Removed some logs from here)
? __efi_call+0x28/0x30
? switch_mm+0x20/0x30
? efi_call_rts+0x19a/0x8e0
? process_one_work+0x222/0x3f0
? worker_thread+0x4a/0x3d0
? kthread+0x17a/0x1a0
? process_one_work+0x3f0/0x3f0
? set_kthread_struct+0x40/0x40
? ret_from_fork+0x22/0x30
</TASK>
---[ end trace
1f82023595a5927f ]---
efi: Froze efi_rts_wq and disabled EFI Runtime Services
integrity: Couldn't get size: 0x8000000000000015
integrity: MODSIGN: Couldn't get UEFI db list
efi: EFI Runtime Services are disabled!
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get UEFI dbx list
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get mokx list
integrity: Couldn't get size: 0x80000000
So we avoid reading these UEFI variables and thus prevent the crash.
Cc: stable@vger.kernel.org
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhihao Cheng [Tue, 10 May 2022 13:38:05 +0000 (21:38 +0800)]
fs-writeback: writeback_sb_inodes:Recalculate 'wrote' according skipped pages
commit
68f4c6eba70df70a720188bce95c85570ddfcc87 upstream.
Commit
505a666ee3fc ("writeback: plug writeback in wb_writeback() and
writeback_inodes_wb()") has us holding a plug during wb_writeback, which
may cause a potential ABBA dead lock:
wb_writeback fat_file_fsync
blk_start_plug(&plug)
for (;;) {
iter i-1: some reqs have been added into plug->mq_list // LOCK A
iter i:
progress = __writeback_inodes_wb(wb, work)
. writeback_sb_inodes // fat's bdev
. __writeback_single_inode
. . generic_writepages
. . __block_write_full_page
. . . . __generic_file_fsync
. . . . sync_inode_metadata
. . . . writeback_single_inode
. . . . __writeback_single_inode
. . . . fat_write_inode
. . . . __fat_write_inode
. . . . sync_dirty_buffer // fat's bdev
. . . . lock_buffer(bh) // LOCK B
. . . . submit_bh
. . . . blk_mq_get_tag // LOCK A
. . . trylock_buffer(bh) // LOCK B
. . . redirty_page_for_writepage
. . . wbc->pages_skipped++
. . --wbc->nr_to_write
. wrote += write_chunk - wbc.nr_to_write // wrote > 0
. requeue_inode
. redirty_tail_locked
if (progress) // progress > 0
continue;
iter i+1:
queue_io
// similar process with iter i, infinite for-loop !
}
blk_finish_plug(&plug) // flush plug won't be called
Above process triggers a hungtask like:
[ 399.044861] INFO: task bb:2607 blocked for more than 30 seconds.
[ 399.046824] Not tainted 5.18.0-rc1-00005-gefae4d9eb6a2-dirty
[ 399.051539] task:bb state:D stack: 0 pid: 2607 ppid:
2426 flags:0x00004000
[ 399.051556] Call Trace:
[ 399.051570] __schedule+0x480/0x1050
[ 399.051592] schedule+0x92/0x1a0
[ 399.051602] io_schedule+0x22/0x50
[ 399.051613] blk_mq_get_tag+0x1d3/0x3c0
[ 399.051640] __blk_mq_alloc_requests+0x21d/0x3f0
[ 399.051657] blk_mq_submit_bio+0x68d/0xca0
[ 399.051674] __submit_bio+0x1b5/0x2d0
[ 399.051708] submit_bio_noacct+0x34e/0x720
[ 399.051718] submit_bio+0x3b/0x150
[ 399.051725] submit_bh_wbc+0x161/0x230
[ 399.051734] __sync_dirty_buffer+0xd1/0x420
[ 399.051744] sync_dirty_buffer+0x17/0x20
[ 399.051750] __fat_write_inode+0x289/0x310
[ 399.051766] fat_write_inode+0x2a/0xa0
[ 399.051783] __writeback_single_inode+0x53c/0x6f0
[ 399.051795] writeback_single_inode+0x145/0x200
[ 399.051803] sync_inode_metadata+0x45/0x70
[ 399.051856] __generic_file_fsync+0xa3/0x150
[ 399.051880] fat_file_fsync+0x1d/0x80
[ 399.051895] vfs_fsync_range+0x40/0xb0
[ 399.051929] __x64_sys_fsync+0x18/0x30
In my test, 'need_resched()' (which is imported by
590dca3a71 "fs-writeback:
unplug before cond_resched in writeback_sb_inodes") in function
'writeback_sb_inodes()' seldom comes true, unless cond_resched() is deleted
from write_cache_pages().
Fix it by correcting wrote number according number of skipped pages
in writeback_sb_inodes().
Goto Link to find a reproducer.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215837
Cc: stable@vger.kernel.org # v4.3
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220510133805.1988292-1-chengzhihao1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emmanuel Grumbach [Tue, 17 May 2022 09:05:09 +0000 (12:05 +0300)]
iwlwifi: mvm: fix assert 1F04 upon reconfig
commit
9d096e3d3061dbf4ee10e2b59fc2c06e05bdb997 upstream.
When we reconfig we must not send the MAC_POWER command that relates to
a MAC that was not yet added to the firmware.
Ignore those in the iterator.
Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220517120044.ed2ffc8ce732.If786e19512d0da4334a6382ea6148703422c7d7b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Berg [Wed, 1 Jun 2022 07:19:36 +0000 (09:19 +0200)]
wifi: mac80211: fix use-after-free in chanctx code
commit
2965c4cdf7ad9ce0796fac5e57debb9519ea721e upstream.
In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE, we free the old context
in ieee80211_vif_use_reserved_reassign(). Therefore, we
cannot check the old_ctx anymore, so we should set it to
NULL after this point.
However, since the new_ctx replace state is clearly not
IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do
anything else in this function and can just return to
avoid accessing the freed old_ctx.
Cc: stable@vger.kernel.org
Fixes:
5bcae31d9cb1 ("mac80211: implement multi-vif in-place reservations")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220601091926.df419d91b165.I17a9b3894ff0b8323ce2afdb153b101124c821e5@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Tue, 17 May 2022 15:42:04 +0000 (17:42 +0200)]
objtool: Fix symbol creation
commit
ead165fa1042247b033afad7be4be9b815d04ade upstream.
Nathan reported objtool failing with the following messages:
warning: objtool: no non-local symbols !?
warning: objtool: gelf_update_symshndx: invalid section index
The problem is due to commit
4abff6d48dbc ("objtool: Fix code relocs
vs weak symbols") failing to consider the case where an object would
have no non-local symbols.
The problem that commit tries to address is adding a STB_LOCAL symbol
to the symbol table in light of the ELF spec's requirement that:
In each symbol table, all symbols with STB_LOCAL binding preced the
weak and global symbols. As ``Sections'' above describes, a symbol
table section's sh_info section header member holds the symbol table
index for the first non-local symbol.
The approach taken is to find this first non-local symbol, move that
to the end and then re-use the freed spot to insert a new local symbol
and increment sh_info.
Except it never considered the case of object files without global
symbols and got a whole bunch of details wrong -- so many in fact that
it is a wonder it ever worked :/
Specifically:
- It failed to re-hash the symbol on the new index, so a subsequent
find_symbol_by_index() would not find it at the new location and a
query for the old location would now return a non-deterministic
choice between the old and new symbol.
- It failed to appreciate that the GElf wrappers are not a valid disk
format (it works because GElf is basically Elf64 and we only
support x86_64 atm.)
- It failed to fully appreciate how horrible the libelf API really is
and got the gelf_update_symshndx() call pretty much completely
wrong; with the direct consequence that if inserting a second
STB_LOCAL symbol would require moving the same STB_GLOBAL symbol
again it would completely come unstuck.
Write a new elf_update_symbol() function that wraps all the magic
required to update or create a new symbol at a given index.
Specifically, gelf_update_sym*() require an @ndx argument that is
relative to the @data argument; this means you have to manually
iterate the section data descriptor list and update @ndx.
Fixes:
4abff6d48dbc ("objtool: Fix code relocs vs weak symbols")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/YoPCTEYjoPqE4ZxB@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Mon, 16 May 2022 15:06:36 +0000 (11:06 -0400)]
objtool: Fix objtool regression on x32 systems
commit
22682a07acc308ef78681572e19502ce8893c4d4 upstream.
Commit
c087c6e7b551 ("objtool: Fix type of reloc::addend") failed to
appreciate cross building from ILP32 hosts, where 'int' == 'long' and
the issue persists.
As such, use s64/int64_t/Elf64_Sxword for this field and suffer the
pain that is ISO C99 printf formats for it.
Fixes:
c087c6e7b551 ("objtool: Fix type of reloc::addend")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[peterz: reword changelog, s/long long/s64/]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/alpine.LRH.2.02.2205161041260.11556@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Wed, 18 May 2022 12:28:41 +0000 (20:28 +0800)]
f2fs: fix to do sanity check for inline inode
commit
677a82b44ebf263d4f9a0cfbd576a6ade797a07b upstream.
Yanming reported a kernel bug in Bugzilla kernel [1], which can be
reproduced. The bug message is:
The kernel message is shown below:
kernel BUG at fs/inode.c:611!
Call Trace:
evict+0x282/0x4e0
__dentry_kill+0x2b2/0x4d0
dput+0x2dd/0x720
do_renameat2+0x596/0x970
__x64_sys_rename+0x78/0x90
do_syscall_64+0x3b/0x90
[1] https://bugzilla.kernel.org/show_bug.cgi?id=215895
The bug is due to fuzzed inode has both inline_data and encrypted flags.
During f2fs_evict_inode(), as the inode was deleted by rename(), it
will cause inline data conversion due to conflicting flags. The page
cache will be polluted and the panic will be triggered in clear_inode().
Try fixing the bug by doing more sanity checks for inline data inode in
sanity_check_inode().
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Tue, 17 May 2022 03:37:23 +0000 (11:37 +0800)]
f2fs: fix fallocate to use file_modified to update permissions consistently
commit
958ed92922028ec67f504dcdc72bfdfd0f43936a upstream.
This patch tries to fix permission consistency issue as all other
mainline filesystems.
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Sat, 14 May 2022 17:59:29 +0000 (10:59 -0700)]
f2fs: don't use casefolded comparison for "." and ".."
commit
b5639bb4313b9d455fc9fc4768d23a5e4ca8cb9d upstream.
Tryng to rename a directory that has all following properties fails with
EINVAL and triggers the 'WARN_ON_ONCE(!fscrypt_has_encryption_key(dir))'
in f2fs_match_ci_name():
- The directory is casefolded
- The directory is encrypted
- The directory's encryption key is not yet set up
- The parent directory is *not* encrypted
The problem is incorrect handling of the lookup of ".." to get the
parent reference to update. fscrypt_setup_filename() treats ".." (and
".") specially, as it's never encrypted. It's passed through as-is, and
setting up the directory's key is not attempted. As the name isn't a
no-key name, f2fs treats it as a "normal" name and attempts a casefolded
comparison. That breaks the assumption of the WARN_ON_ONCE() in
f2fs_match_ci_name() which assumes that for encrypted directories,
casefolded comparisons only happen when the directory's key is set up.
We could just remove this WARN_ON_ONCE(). However, since casefolding is
always a no-op on "." and ".." anyway, let's instead just not casefold
these names. This results in the standard bytewise comparison.
Fixes:
7ad08a58bf67 ("f2fs: Handle casefolding with Encryption")
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Fri, 6 May 2022 01:33:06 +0000 (09:33 +0800)]
f2fs: fix to do sanity check on total_data_blocks
commit
6b8beca0edd32075a769bfe4178ca00c0dcd22a9 upstream.
As Yanming reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215916
The kernel message is shown below:
kernel BUG at fs/f2fs/segment.c:2560!
Call Trace:
allocate_segment_by_default+0x228/0x440
f2fs_allocate_data_block+0x13d1/0x31f0
do_write_page+0x18d/0x710
f2fs_outplace_write_data+0x151/0x250
f2fs_do_write_data_page+0xef9/0x1980
move_data_page+0x6af/0xbc0
do_garbage_collect+0x312f/0x46f0
f2fs_gc+0x6b0/0x3bc0
f2fs_balance_fs+0x921/0x2260
f2fs_write_single_data_page+0x16be/0x2370
f2fs_write_cache_pages+0x428/0xd00
f2fs_write_data_pages+0x96e/0xd50
do_writepages+0x168/0x550
__writeback_single_inode+0x9f/0x870
writeback_sb_inodes+0x47d/0xb20
__writeback_inodes_wb+0xb2/0x200
wb_writeback+0x4bd/0x660
wb_workfn+0x5f3/0xab0
process_one_work+0x79f/0x13e0
worker_thread+0x89/0xf60
kthread+0x26a/0x300
ret_from_fork+0x22/0x30
RIP: 0010:new_curseg+0xe8d/0x15f0
The root cause is: ckpt.valid_block_count is inconsistent with SIT table,
stat info indicates filesystem has free blocks, but SIT table indicates
filesystem has no free segment.
So that during garbage colloection, it triggers panic when LFS allocator
fails to find free segment.
This patch tries to fix this issue by checking consistency in between
ckpt.valid_block_count and block accounted from SIT.
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Fri, 6 May 2022 00:40:25 +0000 (17:40 -0700)]
f2fs: don't need inode lock for system hidden quota
commit
6213f5d4d23c50d393a31dc8e351e63a1fd10dbe upstream.
Let's avoid false-alarmed lockdep warning.
[ 58.914674] [T1501146] -> #2 (&sb->s_type->i_mutex_key#20){+.+.}-{3:3}:
[ 58.915975] [T1501146] system_server: down_write+0x7c/0xe0
[ 58.916738] [T1501146] system_server: f2fs_quota_sync+0x60/0x1a8
[ 58.917563] [T1501146] system_server: block_operations+0x16c/0x43c
[ 58.918410] [T1501146] system_server: f2fs_write_checkpoint+0x114/0x318
[ 58.919312] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c
[ 58.920214] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c
[ 58.920999] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738
[ 58.921862] [T1501146] system_server: f2fs_sync_file+0x30/0x48
[ 58.922667] [T1501146] system_server: __arm64_sys_fsync+0x84/0xf8
[ 58.923506] [T1501146] system_server: el0_svc_common.llvm.
12821150825140585682+0xd8/0x20c
[ 58.924604] [T1501146] system_server: do_el0_svc+0x28/0xa0
[ 58.925366] [T1501146] system_server: el0_svc+0x24/0x38
[ 58.926094] [T1501146] system_server: el0_sync_handler+0x88/0xec
[ 58.926920] [T1501146] system_server: el0_sync+0x1b4/0x1c0
[ 58.927681] [T1501146] -> #1 (&sbi->cp_global_sem){+.+.}-{3:3}:
[ 58.928889] [T1501146] system_server: down_write+0x7c/0xe0
[ 58.929650] [T1501146] system_server: f2fs_write_checkpoint+0xbc/0x318
[ 58.930541] [T1501146] system_server: f2fs_issue_checkpoint+0x178/0x21c
[ 58.931443] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c
[ 58.932226] [T1501146] system_server: sync_filesystem+0xac/0x130
[ 58.933053] [T1501146] system_server: generic_shutdown_super+0x38/0x150
[ 58.933958] [T1501146] system_server: kill_block_super+0x24/0x58
[ 58.934791] [T1501146] system_server: kill_f2fs_super+0xcc/0x124
[ 58.935618] [T1501146] system_server: deactivate_locked_super+0x90/0x120
[ 58.936529] [T1501146] system_server: deactivate_super+0x74/0xac
[ 58.937356] [T1501146] system_server: cleanup_mnt+0x128/0x168
[ 58.938150] [T1501146] system_server: __cleanup_mnt+0x18/0x28
[ 58.938944] [T1501146] system_server: task_work_run+0xb8/0x14c
[ 58.939749] [T1501146] system_server: do_notify_resume+0x114/0x1e8
[ 58.940595] [T1501146] system_server: work_pending+0xc/0x5f0
[ 58.941375] [T1501146] -> #0 (&sbi->gc_lock){+.+.}-{3:3}:
[ 58.942519] [T1501146] system_server: __lock_acquire+0x1270/0x2868
[ 58.943366] [T1501146] system_server: lock_acquire+0x114/0x294
[ 58.944169] [T1501146] system_server: down_write+0x7c/0xe0
[ 58.944930] [T1501146] system_server: f2fs_issue_checkpoint+0x13c/0x21c
[ 58.945831] [T1501146] system_server: f2fs_sync_fs+0x48/0x6c
[ 58.946614] [T1501146] system_server: f2fs_do_sync_file+0x334/0x738
[ 58.947472] [T1501146] system_server: f2fs_ioc_commit_atomic_write+0xc8/0x14c
[ 58.948439] [T1501146] system_server: __f2fs_ioctl+0x674/0x154c
[ 58.949253] [T1501146] system_server: f2fs_ioctl+0x54/0x88
[ 58.950018] [T1501146] system_server: __arm64_sys_ioctl+0xa8/0x110
[ 58.950865] [T1501146] system_server: el0_svc_common.llvm.
12821150825140585682+0xd8/0x20c
[ 58.951965] [T1501146] system_server: do_el0_svc+0x28/0xa0
[ 58.952727] [T1501146] system_server: el0_svc+0x24/0x38
[ 58.953454] [T1501146] system_server: el0_sync_handler+0x88/0xec
[ 58.954279] [T1501146] system_server: el0_sync+0x1b4/0x1c0
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Wed, 4 May 2022 06:09:22 +0000 (14:09 +0800)]
f2fs: fix deadloop in foreground GC
commit
cfd66bb715fd11fde3338d0660cffa1396adc27d upstream.
As Yanming reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215914
The root cause is: in a very small sized image, it's very easy to
exceed threshold of foreground GC, if we calculate free space and
dirty data based on section granularity, in corner case,
has_not_enough_free_secs() will always return true, result in
deadloop in f2fs_gc().
So this patch refactors has_not_enough_free_secs() as below to fix
this issue:
1. calculate needed space based on block granularity, and separate
all blocks to two parts, section part, and block part, comparing
section part to free section, and comparing block part to free space
in openned log.
2. account F2FS_DIRTY_NODES, F2FS_DIRTY_IMETA and F2FS_DIRTY_DENTS
as node block consumer;
3. account F2FS_DIRTY_DENTS as data block consumer;
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Sat, 30 Apr 2022 13:19:24 +0000 (21:19 +0800)]
f2fs: fix to clear dirty inode in f2fs_evict_inode()
commit
f2db71053dc0409fae785096ad19cce4c8a95af7 upstream.
As Yanming reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215904
The kernel message is shown below:
kernel BUG at fs/f2fs/inode.c:825!
Call Trace:
evict+0x282/0x4e0
__dentry_kill+0x2b2/0x4d0
shrink_dentry_list+0x17c/0x4f0
shrink_dcache_parent+0x143/0x1e0
do_one_tree+0x9/0x30
shrink_dcache_for_umount+0x51/0x120
generic_shutdown_super+0x5c/0x3a0
kill_block_super+0x90/0xd0
kill_f2fs_super+0x225/0x310
deactivate_locked_super+0x78/0xc0
cleanup_mnt+0x2b7/0x480
task_work_run+0xc8/0x150
exit_to_user_mode_prepare+0x14a/0x150
syscall_exit_to_user_mode+0x1d/0x40
do_syscall_64+0x48/0x90
The root cause is: inode node and dnode node share the same nid,
so during f2fs_evict_inode(), dnode node truncation will invalidate
its NAT entry, so when truncating inode node, it fails due to
invalid NAT entry, result in inode is still marked as dirty, fix
this issue by clearing dirty for inode and setting SBI_NEED_FSCK
flag in filesystem.
output from dump.f2fs:
[print_node_info: 354] Node ID [0xf:15] is inode
i_nid[0] [0x f : 15]
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Wed, 27 Apr 2022 09:51:40 +0000 (17:51 +0800)]
f2fs: fix to do sanity check on block address in f2fs_do_zero_range()
commit
25f8236213a91efdf708b9d77e9e51b6fc3e141c upstream.
As Yanming reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215894
I have encountered a bug in F2FS file system in kernel v5.17.
I have uploaded the system call sequence as case.c, and a fuzzed image can
be found in google net disk
The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can
reproduce the bug by running the following commands:
kernel BUG at fs/f2fs/segment.c:2291!
Call Trace:
f2fs_invalidate_blocks+0x193/0x2d0
f2fs_fallocate+0x2593/0x4a70
vfs_fallocate+0x2a5/0xac0
ksys_fallocate+0x35/0x70
__x64_sys_fallocate+0x8e/0xf0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is, after image was fuzzed, block mapping info in inode
will be inconsistent with SIT table, so in f2fs_fallocate(), it will cause
panic when updating SIT with invalid blkaddr.
Let's fix the issue by adding sanity check on block address before updating
SIT table with it.
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chao Yu [Tue, 26 Apr 2022 17:06:02 +0000 (01:06 +0800)]
f2fs: fix to avoid f2fs_bug_on() in dec_valid_node_count()
commit
4d17e6fe9293d57081ffdc11e1cf313e25e8fd9e upstream.
As Yanming reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215897
I have encountered a bug in F2FS file system in kernel v5.17.
The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can
reproduce the bug by running the following commands:
The kernel message is shown below:
kernel BUG at fs/f2fs/f2fs.h:2511!
Call Trace:
f2fs_remove_inode_page+0x2a2/0x830
f2fs_evict_inode+0x9b7/0x1510
evict+0x282/0x4e0
do_unlinkat+0x33a/0x540
__x64_sys_unlinkat+0x8e/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is: .total_valid_block_count or .total_valid_node_count
could fuzzed to zero, then once dec_valid_node_count() was called, it
will cause BUG_ON(), this patch fixes to print warning info and set
SBI_NEED_FSCK into CP instead of panic.
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olga Kornievskaia [Wed, 25 May 2022 16:12:59 +0000 (12:12 -0400)]
NFSv4.1 mark qualified async operations as MOVEABLE tasks
[ Upstream commit
118f09eda21d392e1eeb9f8a4bee044958cccf20 ]
Mark async operations such as RENAME, REMOVE, COMMIT MOVEABLE
for the nfsv4.1+ sessions.
Fixes:
85e39feead948 ("NFSv4.1 identify and mark RPC tasks that can move between transports")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sat, 29 Jan 2022 18:57:38 +0000 (13:57 -0500)]
NFS: Convert GFP_NOFS to GFP_KERNEL
[ Upstream commit
da48f267f90d9dc9f930fd9a67753643657b404f ]
Assume that sections that should not re-enter the filesystem are already
protected with memalloc_nofs_save/restore call, so relax those GFP_NOFS
instances which might be used by other contexts.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anna Schumaker [Fri, 22 Oct 2021 17:11:00 +0000 (13:11 -0400)]
NFS: Create a new nfs_alloc_fattr_with_label() function
[ Upstream commit
d755ad8dc752d44545613ea04d660aed674e540d ]
For creating fattrs with the label field already allocated for us. I
also update nfs_free_fattr() to free the label in the end.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Thu, 4 Nov 2021 22:03:26 +0000 (18:03 -0400)]
NFS: Always initialise fattr->label in nfs_fattr_alloc()
[ Upstream commit
d4a95a7e5a4d3b68b26f70668cf77324a11b5718 ]
We're about to add a check in nfs_free_fattr() for whether or not the
label is non-zero.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Javier Martinez Canillas [Thu, 26 May 2022 19:47:52 +0000 (21:47 +0200)]
video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup
[ Upstream commit
acde4003efc16480375543638484d8f13f2e99a3 ]
Commit
b3c9a924aab6 ("fbdev: vesafb: Cleanup fb_info in .fb_destroy rather
than .remove") fixed a use-after-free error due the vesafb driver freeing
the fb_info in the .remove handler instead of doing it in .fb_destroy.
This can happen if the .fb_destroy callback is executed after the .remove
callback, since the former tries to access a pointer freed by the latter.
But that change didn't take into account that another possible scenario is
that .fb_destroy is called before the .remove callback. For example, if no
process has the fbdev chardev opened by the time the driver is removed.
If that's the case, fb_info will be freed when unregister_framebuffer() is
called, making the fb_info pointer accessed in vesafb_remove() after that
to no longer be valid.
To prevent that, move the expression containing the info->par to happen
before the unregister_framebuffer() function call.
Fixes:
b3c9a924aab6 ("fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove")
Reported-by: Pascal Ernster <dri-devel@hardfalcon.net>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Pascal Ernster <dri-devel@hardfalcon.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhengjun Xing [Wed, 25 May 2022 14:04:10 +0000 (22:04 +0800)]
perf jevents: Fix event syntax error caused by ExtSel
[ Upstream commit
f4df0dbbe62ee8e4405a57b27ccd54393971c773 ]
In the origin code, when "ExtSel" is 1, the eventcode will change to
"eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS",
its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E,
but in fact the eventcode should <=0x1FF, so this will cause the parse
fail:
# perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1
event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS'
\___ value too big for format, maximum is 511
On the perf kernel side, the kernel assumes the valid bits are continuous.
It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW.
DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");
So the perf tool follows the kernel side and just set bit8 other than bit21.
Fixes:
fedb2b518239cbc0 ("perf jevents: Add support for parsing uncore json files")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220525140410.1706851-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leo Yan [Thu, 26 May 2022 14:54:00 +0000 (22:54 +0800)]
perf c2c: Use stdio interface if slang is not supported
[ Upstream commit
c4040212bc97d16040712a410335f93bc94d2262 ]
If the slang lib is not installed on the system, perf c2c tool disables TUI
mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is
missed to set true and thus it wrongly applies UI quirks in the function
ui_quirks().
This commit forces to use stdio interface if slang is not supported, and
it can avoid to apply the UI quirks and show the correct metric header.
Before:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
After:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
Fixes:
5a1a99cd2e4e1557 ("perf c2c report: Add main TUI browser")
Reported-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Olsa [Tue, 24 May 2022 12:06:12 +0000 (14:06 +0200)]
perf build: Fix btf__load_from_kernel_by_id() feature check
[ Upstream commit
73534617dfa3c4cd95fe5ffaeff5315e9ffc2de6 ]
The btf__load_from_kernel_by_id() only takes one arg, not two.
Committer notes:
I tested it just with an older libbpf, one where
btf__load_from_kernel_by_id() wasn't introduced yet.
A test with a newer dynamic libbpf would fail because the
btf__load_from_kernel_by_id() is there, but takes just one arg.
Fixes:
0ae065a5d265bc5a ("perf build: Fix check for btf__load_from_kernel_by_id() in libbpf")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/linux-perf-users/YozLKby7ITEtchC9@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuninori Morimoto [Fri, 20 May 2022 09:54:21 +0000 (11:54 +0200)]
i2c: rcar: fix PM ref counts in probe error paths
[ Upstream commit
3fe2ec59db1a7569e18594b9c0cf1f4f1afd498e ]
We have to take care of ID_P_PM_BLOCKED when bailing out during probe.
Fixes:
7ee24eb508d6 ("i2c: rcar: disable PM in multi-master mode")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tali Perry [Tue, 17 May 2022 10:11:39 +0000 (18:11 +0800)]
i2c: npcm: Handle spurious interrupts
[ Upstream commit
e5222d408de2a88e6b206c38217b48d092184553 ]
On some platforms in rare cases (1 to 100,000 transactions),
the i2c gets a spurious interrupt which means that we enter an interrupt
but in the interrupt handler we don't find any status bit that points to
the reason we got this interrupt.
This may be a case of a rare HW issue or signal integrity issue that is
still under investigation.
In order to overcome this we are doing the following:
1. Disable incoming interrupts in master mode only when slave mode is not
enabled.
2. Clear end of busy (EOB) after every interrupt.
3. Clear other status bits (just in case since we found them cleared)
4. Return correct status during the interrupt that will finish the
transaction.
On next xmit transaction if the bus is still busy the master will issue a
recovery process before issuing the new transaction.
Fixes:
56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tyrone Ting [Tue, 17 May 2022 10:11:38 +0000 (18:11 +0800)]
i2c: npcm: Correct register access width
[ Upstream commit
ea9f8426d17620214ee345ffb77ee6cc196ff14f ]
The SMBnCTL3 register is 8-bit wide and the 32-bit access was always
incorrect, but simply didn't cause a visible error on the 32-bit machine.
On the 64-bit machine, the kernel message reports that ESR value is
0x96000021. Checking Arm Architecture Reference Manual Armv8 suggests that
it's the alignment fault.
SMBnCTL3's address is 0xE.
Fixes:
56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tali Perry [Tue, 17 May 2022 10:11:36 +0000 (18:11 +0800)]
i2c: npcm: Fix timeout calculation
[ Upstream commit
288b204492fddf28889cea6dc95a23976632c7a0 ]
Use adap.timeout for timeout calculation instead of hard-coded
value of 35ms.
Fixes:
56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joerg Roedel [Fri, 20 May 2022 10:22:14 +0000 (12:22 +0200)]
iommu/amd: Increase timeout waiting for GA log enablement
[ Upstream commit
42bb5aa043382f09bef2cc33b8431be867c70f8e ]
On some systems it can take a long time for the hardware to enable the
GA log of the AMD IOMMU. The current wait time is only 0.1ms, but
testing showed that it can take up to 14ms for the GA log to enter
running state after it has been enabled.
Sometimes the long delay happens when booting the system, sometimes
only on resume. Adjust the timeout accordingly to not print a warning
when hardware takes a longer than usual.
There has already been an attempt to fix this with commit
9b45a7738eec ("iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()")
But that commit was based on some wrong math and did not fix the issue
in all cases.
Cc: "D. Ziegfeld" <dzigg@posteo.de>
Cc: Jörg-Volker Peetz <jvpeetz@web.de>
Fixes:
8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220520102214.12563-1-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Wed, 4 May 2022 15:53:21 +0000 (17:53 +0200)]
dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
[ Upstream commit
da3b8ddb464bd49b6248d00ca888ad751c9e44fd ]
The parameter to pass back to the handler function when irq has been
requested is a struct stm32_mdma_device pointer, not a struct
stm32_mdma_chan pointer.
Even if chan is reinit later in the function, remove this wrong
initialization.
Fixes:
a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20220504155322.121431-3-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Wed, 4 May 2022 15:53:20 +0000 (17:53 +0200)]
dmaengine: stm32-mdma: remove GISR1 register
[ Upstream commit
9d6a2d92e450926c483e45eaf426080a19219f4e ]
GISR1 was described in a not up-to-date documentation when the stm32-mdma
driver has been developed. This register has not been added in reference
manual of STM32 SoC with MDMA, which have only 32 MDMA channels.
So remove it from stm32-mdma driver.
Fixes:
a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20220504155322.121431-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Thu, 12 May 2022 11:59:08 +0000 (15:59 +0400)]
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
[ Upstream commit
b23789a59fa6f00e98a319291819f91fbba0deb8 ]
of_parse_phandle() returns a node pointer with refcount incremented, we should
use of_node_put() on it when not need anymore. Add missing of_node_put() to
avoid refcount leak.
Fixes:
d10715be03bd ("video: ARM CLCD: Add DT support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sat, 14 May 2022 14:08:12 +0000 (10:08 -0400)]
NFS: Further fixes to the writeback error handling
[ Upstream commit
c6fd3511c3397dd9cbc6dc5d105bbedb69bf4061 ]
When we handle an error by redirtying the page, we're not corrupting the
mapping, so we don't want the error to be recorded in the mapping.
If the caller has specified a sync_mode of WB_SYNC_NONE, we can just
return AOP_WRITEPAGE_ACTIVATE. However if we're dealing with
WB_SYNC_ALL, we need to ensure that retries happen when the errors are
non-fatal.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes:
8fc75bed96bb ("NFS: Fix up return value on fatal errors in nfs_page_async_flush()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sat, 14 May 2022 14:08:11 +0000 (10:08 -0400)]
NFSv4/pNFS: Do not fail I/O when we fail to allocate the pNFS layout
[ Upstream commit
3764a17e31d579cf9b4bd0a69894b577e8d75702 ]
Commit
587f03deb69b caused pnfs_update_layout() to stop returning ENOMEM
when the memory allocation fails, and hence causes it to fall back to
trying to do I/O through the MDS. There is no guarantee that this will
fare any better. If we're failing the pNFS layout allocation, then we
should just redirty the page and retry later.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes:
587f03deb69b ("pnfs: refactor send_layoutget")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sat, 14 May 2022 14:27:04 +0000 (10:27 -0400)]
NFS: Don't report errors from nfs_pageio_complete() more than once
[ Upstream commit
c5e483b77cc2edb318da152abe07e33006b975fd ]
Since errors from nfs_pageio_complete() are already being reported
through nfs_async_write_error(), we should not be returning them to the
callers of do_writepages() as well. They will end up being reported
through the generic mechanism instead.
Fixes:
6fbda89b257f ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sat, 14 May 2022 14:27:03 +0000 (10:27 -0400)]
NFS: Do not report flush errors in nfs_write_end()
[ Upstream commit
d95b26650e86175e4a97698d89bc1626cd1df0c6 ]
If we do flush cached writebacks in nfs_write_end() due to the imminent
expiration of an RPCSEC_GSS session, then we should defer reporting any
resulting errors until the calls to file_check_and_advance_wb_err() in
nfs_file_write() and nfs_file_fsync().
Fixes:
6fbda89b257f ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sat, 14 May 2022 14:27:02 +0000 (10:27 -0400)]
NFS: Don't report ENOSPC write errors twice
[ Upstream commit
e6005436f6cc9ed13288f936903f0151e5543485 ]
Any errors reported by the write() system call need to be cleared from
the file descriptor's error tracking. The current call to nfs_wb_all()
causes the error to be reported, but since it doesn't call
file_check_and_advance_wb_err(), we can end up reporting the same error
a second time when the application calls fsync().
Note that since Linux 4.13, the rule is that EIO may be reported for
write(), but it must be reported by a subsequent fsync(), so let's just
drop reporting it in write.
The check for nfs_ctx_key_to_expire() is just a duplicate to the one
already in nfs_write_end(), so let's drop that too.
Reported-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Fixes:
ce368536dd61 ("nfs: nfs_file_write() should check for writeback errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sat, 14 May 2022 14:27:01 +0000 (10:27 -0400)]
NFS: fsync() should report filesystem errors over EINTR/ERESTARTSYS
[ Upstream commit
9641d9bc9b75f11f70646f5c6ee9f5f519a1012e ]
If the commit to disk is interrupted, we should still first check for
filesystem errors so that we can report them in preference to the error
due to the signal.
Fixes:
2197e9b06c22 ("NFS: Fix up fsync() when the server rebooted")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Sat, 14 May 2022 14:27:00 +0000 (10:27 -0400)]
NFS: Do not report EINTR/ERESTARTSYS as mapping errors
[ Upstream commit
cea9ba7239dcc84175041174304c6cdeae3226e5 ]
If the attempt to flush data was interrupted due to a local signal, then
just requeue the writes back for I/O.
Fixes:
6fbda89b257f ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 21 Apr 2022 06:13:38 +0000 (08:13 +0200)]
dmaengine: idxd: Fix the error handling path in idxd_cdev_register()
[ Upstream commit
aab08c1aac01097815fbcf10fce7021d2396a31f ]
If a call to alloc_chrdev_region() fails, the already allocated resources
are leaking.
Add the needed error handling path to fix the leak.
Fixes:
42d279f9137a ("dmaengine: idxd: add char driver to expose submission portal to userland")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/1b5033dcc87b5f2a953c413f0306e883e6114542.1650521591.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Thu, 5 May 2022 15:27:38 +0000 (08:27 -0700)]
i2c: at91: Initialize dma_buf in at91_twi_xfer()
[ Upstream commit
6977262c2eee111645668fe9e235ef2f5694abf7 ]
Clang warns:
drivers/i2c/busses/i2c-at91-master.c:707:6: warning: variable 'dma_buf' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (dev->use_dma) {
^~~~~~~~~~~~
drivers/i2c/busses/i2c-at91-master.c:717:27: note: uninitialized use occurs here
i2c_put_dma_safe_msg_buf(dma_buf, m_start, !ret);
^~~~~~~
Initialize dma_buf to NULL, as i2c_put_dma_safe_msg_buf() is a no-op
when the first argument is NULL, which will work for the !dev->use_dma
case.
Fixes:
03fbb903c8bf ("i2c: at91: use dma safe buffers")
Link: https://github.com/ClangBuiltLinux/linux/issues/1629
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miles Chen [Thu, 5 May 2022 13:27:30 +0000 (21:27 +0800)]
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
[ Upstream commit
de78657e16f41417da9332f09c2d67d100096939 ]
When larbdev is NULL (in the case I hit, the node is incorrectly set
iommus = <&iommu NUM>), it will cause device_link_add() fail and
kernel crashes when we try to print dev_name(larbdev).
Let's fail the probe if a larbdev is NULL to avoid invalid inputs from
dts.
It should work for normal correct setting and avoid the crash caused
by my incorrect setting.
Error log:
[ 18.189042][ T301] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000050
...
[ 18.344519][ T301] pstate:
a0400005 (NzCv daif +PAN -UAO)
[ 18.345213][ T301] pc : mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu]
[ 18.346050][ T301] lr : mtk_iommu_probe_device+0xd0/0x118 [mtk_iommu]
[ 18.346884][ T301] sp :
ffffffc00a5635e0
[ 18.347392][ T301] x29:
ffffffc00a5635e0 x28:
ffffffd44a46c1d8
[ 18.348156][ T301] x27:
ffffff80c39a8000 x26:
ffffffd44a80cc38
[ 18.348917][ T301] x25:
0000000000000000 x24:
ffffffd44a80cc38
[ 18.349677][ T301] x23:
ffffffd44e4da4c6 x22:
ffffffd44a80cc38
[ 18.350438][ T301] x21:
ffffff80cecd1880 x20:
0000000000000000
[ 18.351198][ T301] x19:
ffffff80c439f010 x18:
ffffffc00a50d0c0
[ 18.351959][ T301] x17:
ffffffffffffffff x16:
0000000000000004
[ 18.352719][ T301] x15:
0000000000000004 x14:
ffffffd44eb5d420
[ 18.353480][ T301] x13:
0000000000000ad2 x12:
0000000000000003
[ 18.354241][ T301] x11:
00000000fffffad2 x10:
c0000000fffffad2
[ 18.355003][ T301] x9 :
a0d288d8d7142d00 x8 :
a0d288d8d7142d00
[ 18.355763][ T301] x7 :
ffffffd44c2bc640 x6 :
0000000000000000
[ 18.356524][ T301] x5 :
0000000000000080 x4 :
0000000000000001
[ 18.357284][ T301] x3 :
0000000000000000 x2 :
0000000000000005
[ 18.358045][ T301] x1 :
0000000000000000 x0 :
0000000000000000
[ 18.360208][ T301] Hardware name: MT6873 (DT)
[ 18.360771][ T301] Call trace:
[ 18.361168][ T301] dump_backtrace+0xf8/0x1f0
[ 18.361737][ T301] dump_stack_lvl+0xa8/0x11c
[ 18.362305][ T301] dump_stack+0x1c/0x2c
[ 18.362816][ T301] mrdump_common_die+0x184/0x40c [mrdump]
[ 18.363575][ T301] ipanic_die+0x24/0x38 [mrdump]
[ 18.364230][ T301] atomic_notifier_call_chain+0x128/0x2b8
[ 18.364937][ T301] die+0x16c/0x568
[ 18.365394][ T301] __do_kernel_fault+0x1e8/0x214
[ 18.365402][ T301] do_page_fault+0xb8/0x678
[ 18.366934][ T301] do_translation_fault+0x48/0x64
[ 18.368645][ T301] do_mem_abort+0x68/0x148
[ 18.368652][ T301] el1_abort+0x40/0x64
[ 18.368660][ T301] el1h_64_sync_handler+0x54/0x88
[ 18.368668][ T301] el1h_64_sync+0x68/0x6c
[ 18.368673][ T301] mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu]
...
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
635319a4a744 ("media: iommu/mediatek: Add device_link between the consumer and the larb devices")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220505132731.21628-1-miles.chen@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Wed, 11 May 2022 14:56:59 +0000 (07:56 -0700)]
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
[ Upstream commit
abae018a03821be2b65c01ebe2bef06fd7d85a4c ]
Calling hwmon_device_register_with_info() with NULL dev and/or chip
information parameters is an ABI abuse and not a real conversion to
the new API. Also, the code creates sysfs attributes _after_ creating
the hwmon device, which is racy and unsupported to start with. On top
of that, the removal code tries to remove the name attribute which is
owned by the hwmon core.
Use hwmon_device_register_with_groups() to register the hwmon device
instead.
In the future, the hwmon subsystem will reject calls to
hwmon_device_register_with_info with NULL dev or chip/info parameters.
Without this patch, the hwmon device will fail to register.
Fixes:
f59dc5119192 ("MIPS: Loongson: Fix boot warning about hwmon_device_register()")
Cc: Zhi Li <lizhi01@loongson.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jean-Philippe Brucker [Tue, 26 Apr 2022 13:04:45 +0000 (14:04 +0100)]
iommu/arm-smmu-v3-sva: Fix mm use-after-free
[ Upstream commit
cbd23144f7662b00bcde32a938c4a4057e476d68 ]
We currently call arm64_mm_context_put() without holding a reference to
the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to
ensure the mm only gets freed after we unpinned the ASID.
Fixes:
32784a9562fb ("iommu/arm-smmu-v3: Implement iommu_sva_bind/unbind()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20220426130444.300556-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rex-BC Chen [Thu, 5 May 2022 11:52:18 +0000 (19:52 +0800)]
cpufreq: mediatek: Unregister platform device on exit
[ Upstream commit
f126fbadce92b92c3a7be41e4abc1fbae93ae2ef ]
We register the platform device when driver inits. However, we do not
unregister it when driver exits.
To resolve this, we declare the platform data to be a global static
variable and rename it to be "cpufreq_pdev". With this global variable,
we can do platform_device_unregister() when driver exits.
Fixes:
501c574f4e3a ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC")
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
[ Viresh: Commit log and Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Wei Chang [Fri, 8 Apr 2022 04:58:55 +0000 (12:58 +0800)]
cpufreq: mediatek: Use module_init and add module_exit
[ Upstream commit
b7070187c81cb90549d7561c0e750d7c7eb751f4 ]
- Use module_init instead of device_initcall.
- Add a function for module_exit to unregister driver.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Thu, 7 Apr 2022 15:08:28 +0000 (17:08 +0200)]
i2c: at91: use dma safe buffers
[ Upstream commit
03fbb903c8bf7e53e101e8d9a7b261264317c411 ]
The supplied buffer might be on the stack and we get the following error
message:
[ 3.312058] at91_i2c
e0070600.i2c: rejecting DMA map of vmalloc memory
Use i2c_{get,put}_dma_safe_msg_buf() to get a DMA-able memory region if
necessary.
Fixes:
60937b2cdbf9 ("i2c: at91: add dma support")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yong Wu [Tue, 3 May 2022 07:13:58 +0000 (15:13 +0800)]
iommu/mediatek: Add mutex for m4u_group and m4u_dom in data
[ Upstream commit
0e5a3f2e630b28e88e018655548212ef8eb4dfcb ]
Add a mutex to protect the data in the structure mtk_iommu_data,
like ->"m4u_group" ->"m4u_dom". For the internal data, we should
protect it in ourselves driver. Add a mutex for this.
This could be a fix for the multi-groups support.
Fixes:
c3045f39244e ("iommu/mediatek: Support for multi domains")
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-8-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yong Wu [Tue, 3 May 2022 07:13:57 +0000 (15:13 +0800)]
iommu/mediatek: Remove clk_disable in mtk_iommu_remove
[ Upstream commit
98df772bdd1c4ce717a26289efea15cbbe4b64ed ]
After the commit
b34ea31fe013 ("iommu/mediatek: Always enable the clk on
resume"), the iommu clock is controlled by the runtime callback.
thus remove the clk control in the mtk_iommu_remove.
Otherwise, it will warning like:
echo
14018000.iommu > /sys/bus/platform/drivers/mtk-iommu/unbind
[ 51.413044] ------------[ cut here ]------------
[ 51.413648] vpp0_smi_iommu already disabled
[ 51.414233] WARNING: CPU: 2 PID: 157 at */v5.15-rc1/kernel/mediatek/
drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8
[ 51.417174] Hardware name: MT8195V/C(ENG) (DT)
[ 51.418635] pc : clk_core_disable+0xb0/0xb8
[ 51.419177] lr : clk_core_disable+0xb0/0xb8
...
[ 51.429375] Call trace:
[ 51.429694] clk_core_disable+0xb0/0xb8
[ 51.430193] clk_core_disable_lock+0x24/0x40
[ 51.430745] clk_disable+0x20/0x30
[ 51.431189] mtk_iommu_remove+0x58/0x118
[ 51.431705] platform_remove+0x28/0x60
[ 51.432197] device_release_driver_internal+0x110/0x1f0
[ 51.432873] device_driver_detach+0x18/0x28
[ 51.433418] unbind_store+0xd4/0x108
[ 51.433886] drv_attr_store+0x24/0x38
[ 51.434363] sysfs_kf_write+0x40/0x58
[ 51.434843] kernfs_fop_write_iter+0x164/0x1e0
Fixes:
b34ea31fe013 ("iommu/mediatek: Always enable the clk on resume")
Reported-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-7-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yong Wu [Tue, 3 May 2022 07:13:56 +0000 (15:13 +0800)]
iommu/mediatek: Add list_del in mtk_iommu_remove
[ Upstream commit
ee55f75e4bcade81d253163641b63bef3e76cac4 ]
Lack the list_del in the mtk_iommu_remove, and remove
bus_set_iommu(*, NULL) since there may be several iommu HWs.
we can not bus_set_iommu null when one iommu driver unbind.
This could be a fix for mt2712 which support 2 M4U HW and list them.
Fixes:
7c3a2ec02806 ("iommu/mediatek: Merge 2 M4U HWs into one iommu domain")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-6-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yong Wu [Tue, 3 May 2022 07:13:55 +0000 (15:13 +0800)]
iommu/mediatek: Fix 2 HW sharing pgtable issue
[ Upstream commit
645b87c190c959e9bb4f216b8c4add4ee880451a ]
In the commit
4f956c97d26b ("iommu/mediatek: Move domain_finalise into
attach_device"), I overlooked the sharing pgtable case.
After that commit, the "data" in the mtk_iommu_domain_finalise always is
the data of the current IOMMU HW. Fix this for the sharing pgtable case.
Only affect mt2712 which is the only SoC that share pgtable currently.
Fixes:
4f956c97d26b ("iommu/mediatek: Move domain_finalise into attach_device")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-5-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Mon, 4 Apr 2022 20:47:22 +0000 (15:47 -0500)]
iommu/amd: Enable swiotlb in all cases
[ Upstream commit
121660bba631104154b7c15e88f208c48c8c3297 ]
Previously the AMD IOMMU would only enable SWIOTLB in certain
circumstances:
* IOMMU in passthrough mode
* SME enabled
This logic however doesn't work when an untrusted device is plugged in
that doesn't do page aligned DMA transactions. The expectation is
that a bounce buffer is used for those transactions.
This fails like this:
swiotlb buffer is full (sz: 4096 bytes), total 0 (slots), used 0 (slots)
That happens because the bounce buffers have been allocated, followed by
freed during startup but the bounce buffering code expects that all IOMMUs
have left it enabled.
Remove the criteria to set up bounce buffers on AMD systems to ensure
they're always available for supporting untrusted devices.
Fixes:
82612d66d51d ("iommu: Allow the dma-iommu api to use bounce buffers")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220404204723.9767-2-mario.limonciello@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakob Koschel [Thu, 31 Mar 2022 22:34:14 +0000 (00:34 +0200)]
f2fs: fix dereference of stale list iterator after loop body
[ Upstream commit
2aaf51dd39afb6d01d13f1e6fe20b684733b37d5 ]
The list iterator variable will be a bogus pointer if no break was hit.
Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined
value making it unsafe to use that in the comparision to determine if the
specific element was found.
Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that
by chance (or intention of an attacker) it matches the value of 'page'
even though the correct element was not found.
This is fixed by using a separate list iterator variable for the loop
and only setting the original variable if a suitable element was found.
Then determing if the element was found is simply checking if the
variable is set.
Fixes:
8c242db9b8c0 ("f2fs: fix stale ATOMIC_WRITTEN_PAGE private pointer")
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Mon, 28 Mar 2022 16:02:53 +0000 (00:02 +0800)]
f2fs: fix to do sanity check on inline_dots inode
[ Upstream commit
12662d19467b391b5b509ac5e9ab4f583c6dde16 ]
As Wenqing reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215765
It will cause a kernel panic with steps:
- mkdir mnt
- mount tmp40.img mnt
- ls mnt
folio_mark_dirty+0x33/0x50
f2fs_add_regular_entry+0x541/0xad0 [f2fs]
f2fs_add_dentry+0x6c/0xb0 [f2fs]
f2fs_do_add_link+0x182/0x230 [f2fs]
__recover_dot_dentries+0x2d6/0x470 [f2fs]
f2fs_lookup+0x5af/0x6a0 [f2fs]
__lookup_slow+0xac/0x200
lookup_slow+0x45/0x70
walk_component+0x16c/0x250
path_lookupat+0x8b/0x1f0
filename_lookup+0xef/0x250
user_path_at_empty+0x46/0x70
vfs_statx+0x98/0x190
__do_sys_newlstat+0x41/0x90
__x64_sys_newlstat+0x1a/0x30
do_syscall_64+0x37/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is for special file: e.g. character, block, fifo or
socket file, f2fs doesn't assign address space operations pointer array
for mapping->a_ops field, so, in a fuzzed image, if inline_dots flag was
tagged in special file, during lookup(), when f2fs runs into
__recover_dot_dentries(), it will cause NULL pointer access once
f2fs_add_regular_entry() calls a_ops->set_dirty_page().
Fixes:
510022a85839 ("f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries")
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Thu, 28 Oct 2021 13:03:05 +0000 (21:03 +0800)]
f2fs: support fault injection for dquot_initialize()
[ Upstream commit
10a26878564f27327b12e8f4b4d8d7b43065fae5 ]
This patch adds a new function f2fs_dquot_initialize() to wrap
dquot_initialize(), and it supports to inject fault into
f2fs_dquot_initialize() to simulate inner failure occurs in
dquot_initialize().
Usage:
a) echo 65536 > /sys/fs/f2fs/<dev>/inject_type or
b) mount -o fault_type=65536 <dev> <mountpoint>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 6 Apr 2022 06:40:14 +0000 (09:40 +0300)]
OPP: call of_node_put() on error path in _bandwidth_supported()
[ Upstream commit
907ed123b9d096c73e9361f6cd4097f0691497f2 ]
This code does not call of_node_put(opp_np) if of_get_next_available_child()
returns NULL. But it should.
Fixes:
45679f9b508f ("opp: Don't parse icc paths unnecessarily")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Wed, 25 May 2022 16:51:08 +0000 (09:51 -0700)]
Input: stmfts - do not leave device disabled in stmfts_input_open
[ Upstream commit
5f76955ab1e43e5795a9631b22ca4f918a0ae986 ]
The commit
26623eea0da3 attempted to deal with potential leak of runtime
PM counter when opening the touchscreen device, however it ended up
erroneously dropping the counter in the case of successfully enabling the
device.
Let's address this by using pm_runtime_resume_and_get() and then executing
pm_runtime_put_sync() only when we fail to send "sense on" command to the
device.
Fixes:
26623eea0da3 ("Input: stmfts - fix reference leak in stmfts_input_open")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wanpeng Li [Fri, 20 May 2022 14:15:18 +0000 (10:15 -0400)]
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
[ Upstream commit
619f51da097952194a5d4d6a6c5f9ef3b9d1b25a ]
The timer is disarmed when switching between TSC deadline and other modes;
however, the pending timer is still in-flight, so let's accurately remove
any traces of the previous mode.
Fixes:
4427593258 ("KVM: x86: thoroughly disarm LAPIC timer around TSC deadline switch")
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Miller [Fri, 20 May 2022 18:37:01 +0000 (14:37 -0400)]
RDMA/hfi1: Prevent use of lock before it is initialized
[ Upstream commit
05c03dfd09c069c4ffd783b47b2da5dcc9421f2c ]
If there is a failure during probe of hfi1 before the sdma_map_lock is
initialized, the call to hfi1_free_devdata() will attempt to use a lock
that has not been initialized. If the locking correctness validator is on
then an INFO message and stack trace resembling the following may be seen:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Call Trace:
register_lock_class+0x11b/0x880
__lock_acquire+0xf3/0x7930
lock_acquire+0xff/0x2d0
_raw_spin_lock_irq+0x46/0x60
sdma_clean+0x42a/0x660 [hfi1]
hfi1_free_devdata+0x3a7/0x420 [hfi1]
init_one+0x867/0x11a0 [hfi1]
pci_device_probe+0x40e/0x8d0
The use of sdma_map_lock in sdma_clean() is for freeing the sdma_map
memory, and sdma_map is not allocated/initialized until after
sdma_map_lock has been initialized. This code only needs to be run if
sdma_map is not NULL, and so checking for that condition will avoid trying
to use the lock before it is initialized.
Fixes:
473291b3ea0e ("IB/hfi1: Fix for early release of sdma context")
Fixes:
7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20220520183701.48973.72434.stgit@awfm-01.cornelisnetworks.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Björn Ardö [Thu, 31 Mar 2022 07:01:15 +0000 (09:01 +0200)]
mailbox: forward the hrtimer if not queued and under a lock
[ Upstream commit
bca1a1004615efe141fd78f360ecc48c60bc4ad5 ]
This reverts commit
c7dacf5b0f32957b24ef29df1207dc2cd8307743,
"mailbox: avoid timer start from callback"
The previous commit was reverted since it lead to a race that
caused the hrtimer to not be started at all. The check for
hrtimer_active() in msg_submit() will return true if the
callback function txdone_hrtimer() is currently running. This
function could return HRTIMER_NORESTART and then the timer
will not be restarted, and also msg_submit() will not start
the timer. This will lead to a message actually being submitted
but no timer will start to check for its compleation.
The original fix that added checking hrtimer_active() was added to
avoid a warning with hrtimer_forward. Looking in the kernel
another solution to avoid this warning is to check hrtimer_is_queued()
before calling hrtimer_forward_now() instead. This however requires a
lock so the timer is not started by msg_submit() inbetween this check
and the hrtimer_forward() call.
Fixes:
c7dacf5b0f32 ("mailbox: avoid timer start from callback")
Signed-off-by: Björn Ardö <bjorn.ardo@axis.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julian Schroeder [Mon, 23 May 2022 18:52:26 +0000 (18:52 +0000)]
nfsd: destroy percpu stats counters after reply cache shutdown
[ Upstream commit
fd5e363eac77ef81542db77ddad0559fa0f9204e ]
Upon nfsd shutdown any pending DRC cache is freed. DRC cache use is
tracked via a percpu counter. In the current code the percpu counter
is destroyed before. If any pending cache is still present,
percpu_counter_add is called with a percpu counter==NULL. This causes
a kernel crash.
The solution is to destroy the percpu counter after the cache is freed.
Fixes:
e567b98ce9a4b (“nfsd: protect concurrent access to nfsd stats counters”)
Signed-off-by: Julian Schroeder <jumaco@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Tue, 26 Apr 2022 03:08:57 +0000 (11:08 +0800)]
mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()
[ Upstream commit
311242c7703df0da14c206260b7e855f69cb0264 ]
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes:
b5e29aa880be ("mfd: davinci_voicecodec: Remove pointless #include")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220426030857.3539336-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Thu, 12 May 2022 12:37:18 +0000 (16:37 +0400)]
powerpc/fsl_rio: Fix refcount leak in fsl_rio_setup
[ Upstream commit
fcee96924ba1596ca80a6770b2567ca546f9a482 ]
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes:
abc3aeae3aaa ("fsl-rio: Add two ports and rapidio message units support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220512123724.62931-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Thu, 12 May 2022 09:05:33 +0000 (13:05 +0400)]
powerpc/xive: Fix refcount leak in xive_spapr_init
[ Upstream commit
1d1fb9618bdd5a5fbf9a9eb75133da301d33721c ]
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes:
eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220512090535.33397-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Tue, 1 Feb 2022 12:31:16 +0000 (13:31 +0100)]
powerpc/xive: Add some error handling code to 'xive_spapr_init()'
[ Upstream commit
e414e2938ee26e734f19e92a60cd090ebaff37e6 ]
'xive_irq_bitmap_add()' can return -ENOMEM.
In this case, we should free the memory already allocated and return
'false' to the caller.
Also add an error path which undoes the 'tima = ioremap(...)'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/564998101804886b151235c8a9f93020923bfd2c.1643718324.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Sun, 10 Apr 2022 16:10:35 +0000 (09:10 -0700)]
macintosh: via-pmu and via-cuda need RTC_LIB
[ Upstream commit
9a9c5ff5fff87eb1a43db0d899473554e408fd7b ]
Fix build when RTC_LIB is not set/enabled.
Eliminates these build errors:
m68k-linux-ld: drivers/macintosh/via-pmu.o: in function `pmu_set_rtc_time':
drivers/macintosh/via-pmu.c:1769: undefined reference to `rtc_tm_to_time64'
m68k-linux-ld: drivers/macintosh/via-cuda.o: in function `cuda_set_rtc_time':
drivers/macintosh/via-cuda.c:797: undefined reference to `rtc_tm_to_time64'
Fixes:
0792a2c8e0bb ("macintosh: Use common code to access RTC")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220410161035.592-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kajol Jain [Fri, 6 May 2022 06:10:15 +0000 (11:40 +0530)]
powerpc/perf: Fix the threshold compare group constraint for power9
[ Upstream commit
ab0cc6bbf0c812731c703ec757fcc3fc3a457a34 ]
Thresh compare bits for a event is used to program thresh compare
field in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9).
When scheduling events as a group, all events in that group should
match value in threshold bits (like thresh compare, thresh control,
thresh select). Otherwise event open for the sibling events should fail.
But in the current code, incase thresh compare bits are not valid,
we are not failing in group_constraint function which can result
in invalid group schduling.
Fix the issue by returning -1 incase event is threshold and threshold
compare value is not valid.
Thresh control bits in the event code is used to program thresh_ctl
field in Monitor Mode Control Register A (MMCRA: 48-55). In below example,
the scheduling of group events PM_MRK_INST_CMPL (
873534401e0) and
PM_THRESH_MET (
8734340101ec) is expected to fail as both event
request different thresh control bits and invalid thresh compare value.
Result before the patch changes:
[command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1
Performance counter stats for 'sleep 1':
11,048 r8735340401e0
1,967 r8734340101ec
1.
001354036 seconds time elapsed
0.
001421000 seconds user
0.
000000000 seconds sys
Result after the patch changes:
[command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (r8735340401e0).
/bin/dmesg | grep -i perf may provide additional information.
Fixes:
78a16d9fc1206 ("powerpc/perf: Avoid FAB_*_MATCH checks for power9")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506061015.43916-2-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kajol Jain [Fri, 6 May 2022 06:10:14 +0000 (11:40 +0530)]
powerpc/perf: Fix the threshold compare group constraint for power10
[ Upstream commit
505d31650ba96d6032313480fdb566d289a4698c ]
Thresh compare bits for a event is used to program thresh compare
field in Monitor Mode Control Register A (MMCRA: 8-18 bits for power10).
When scheduling events as a group, all events in that group should
match value in threshold bits. Otherwise event open for the sibling
events should fail. But in the current code, incase thresh compare bits are
not valid, we are not failing in group_constraint function which can result
in invalid group schduling.
Fix the issue by returning -1 incase event is threshold and threshold
compare value is not valid in group_constraint function.
Patch also fixes the p10_thresh_cmp_val function to return -1,
incase threshold bits are not valid and changes corresponding check in
is_thresh_cmp_valid function to return false only when the thresh_cmp
value is less then 0.
Thresh control bits in the event code is used to program thresh_ctl
field in Monitor Mode Control Register A (MMCRA: 48-55). In below example,
the scheduling of group events PM_MRK_INST_CMPL (
3534401e0) and
PM_THRESH_MET (
34340101ec) is expected to fail as both event
request different thresh control bits.
Result before the patch changes:
[command]# perf stat -e "{r35340401e0,r34340101ec}" sleep 1
Performance counter stats for 'sleep 1':
8,482 r35340401e0
0 r34340101ec
1.
001474838 seconds time elapsed
0.
001145000 seconds user
0.
000000000 seconds sys
Result after the patch changes:
[command]# perf stat -e "{r35340401e0,r34340101ec}" sleep 1
Performance counter stats for 'sleep 1':
<not counted> r35340401e0
<not supported> r34340101ec
1.
001499607 seconds time elapsed
0.
000204000 seconds user
0.
000760000 seconds sys
Fixes:
82d2c16b350f7 ("powerpc/perf: Adds support for programming of Thresholding in P10")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506061015.43916-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>