Dan Carpenter [Thu, 25 Jan 2018 14:13:40 +0000 (17:13 +0300)]
scsi: sym53c8xx_2: iterator underflow in sym_getsync()
We wanted to exit the loop with "div" set to zero, but instead, if we
don't hit the break then "div" is -1 when we finish the loop. It leads
to an array underflow a few lines later.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chad Dupuis [Wed, 24 Jan 2018 16:07:06 +0000 (08:07 -0800)]
scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
When a request times out we set the io_req flag BNX2FC_FLAG_IO_COMPL so
that if a subsequent completion comes in on that task ID we will ignore
it. The issue is that in the check for this flag there is a missing
return so we will continue to process a request which may have already
been returned to the ownership of the SCSI layer. This can cause
unpredictable results.
Solution is to add in the missing return.
[mkp: typo plus title shortening]
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Wed, 24 Jan 2018 14:58:01 +0000 (14:58 +0000)]
scsi: csiostor: remove redundant assignment to pointer 'ln'
The pointer ln is assigned a value that is never read, it is re-assigned
a new value in the list_for_each loop hence the initialization is
redundant and can be removed.
Cleans up clang warning:
drivers/scsi/csiostor/csio_lnode.c:117:21: warning: Value stored to 'ln'
during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sujit Reddy Thumma [Wed, 24 Jan 2018 04:22:35 +0000 (09:52 +0530)]
scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
WRITE_SAME command is not supported by UFS. Enable a quirk for the upper
level drivers to not send WRITE SAME command.
[mkp: botched patch, applied by hand]
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tyrel Datwyler [Wed, 24 Jan 2018 02:11:32 +0000 (20:11 -0600)]
scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
The fcp_rsp_info structure as defined in the FC spec has an initial 3
bytes reserved field. The ibmvfc driver mistakenly defined this field as
4 bytes resulting in the rsp_code field being defined in what should be
the start of the second reserved field and thus always being reported as
zero by the driver.
Ideally, we should wire ibmvfc up with libfc for the sake of code
deduplication, and ease of maintaining standardized structures in a
single place. However, for now simply fixup the definition in ibmvfc for
backporting to distros on older kernels. Wiring up with libfc will be
done in a followup patch.
Cc: <stable@vger.kernel.org>
Reported-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Tue, 23 Jan 2018 19:05:21 +0000 (11:05 -0800)]
scsi: qla2xxx: Fix memory corruption during hba reset test
This patch fixes memory corrpution while performing HBA Reset test.
Following stack trace is seen:
[ 466.397219] BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
[ 466.433669] IP: [<
ffffffffc06f5dd0>] qlt_free_session_done+0x260/0x5f0 [qla2xxx]
[ 466.467731] PGD 0
[ 466.476718] Oops: 0000 [#1] SMP
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tomas Henzl [Fri, 19 Jan 2018 15:22:05 +0000 (16:22 +0100)]
scsi: mpt3sas: fix an out of bound write
cpu_msix_table is allocated to store online cpus, but pci_irq_get_affinity
may return cpu_possible_mask which is then used to access cpu_msix_table.
That causes bad user experience. Fix limits access to only online cpus,
I've also added an additional test to protect from an unlikely change in
cpu_online_mask.
[mkp: checkpatch]
Fixes:
1d55abc0e98a ("scsi: mpt3sas: switch to pci_alloc_irq_vectors")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Madhani [Mon, 22 Jan 2018 20:04:20 +0000 (12:04 -0800)]
scsi: qla2xxx: Fix logo flag for qlt_free_session_done()
Commit
3515832cc614 ("scsi: qla2xxx: Reset the logo flag, after target
re-login.")fixed the target re-login after session relogin is complete,
but missed out the qlt_free_session_done() path.
This patch clears send_els_logo flag in qlt_free_session_done()
callback.
[mkp: checkpatch]
Fixes:
3515832cc614 ("scsi: qla2xxx: Reset the logo flag, after target re-login.")
Signed-off-by: Himanshu Madhani <hmadhani@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Sun, 21 Jan 2018 23:12:26 +0000 (00:12 +0100)]
scsi: arcmsr: avoid do_gettimeofday
The arcmsr uses its own implementation of time_to_tm(), along with
do_gettimeofday() to read the current time. While the algorithm used
here is fine in principle, it suffers from two problems:
- it assigns the seconds portion of the timeval to a 32-bit unsigned
integer that overflows in 2106 even on 64-bit architectures.
- do_gettimeofday() returns a time_t that overflows in 2038 on all
32-bit systems.
This changes the time retrieval function to ktime_get_real_seconds(),
which returns a proper 64-bit value, and replaces the open-coded
time_to_tm() algorithm with a call to the safe time64_to_tm().
I checked way all numbers are indexed and found that months are given in
range 0..11 while the days are in range 1..31, same as 'struct tm', but
the year value that the firmware expects starts in 2000 while 'struct
tm' is based on year 1900, so it needs a small adjustment.
[mkp: checkpatch tweaks]
Fixes:
b416c099472a ("scsi: arcmsr: Add a function to set date and time to firmware")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Fri, 19 Jan 2018 15:11:10 +0000 (16:11 +0100)]
scsi: core: Add VENDOR_SPECIFIC sense code definitions
Some older devices will return vendor specific sense codes, so we should
be adding a definition for it.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manish Rangankar [Fri, 19 Jan 2018 06:52:09 +0000 (22:52 -0800)]
scsi: qedi: Drop cqe response during connection recovery
We get stuck in the loop when firmware sends a cqe response during
connection recovery.
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Thu, 18 Jan 2018 13:16:38 +0000 (14:16 +0100)]
scsi: fas216: fix sense buffer initialization
While testing with the ARM specific memset() macro removed, I ran into a
compiler warning that shows an old bug:
drivers/scsi/arm/fas216.c: In function 'fas216_rq_sns_done':
drivers/scsi/arm/fas216.c:2014:40: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]
It turns out that the definition of the scsi_cmd structure changed back
in linux-2.6.25, so now we clear only four bytes (sizeof(pointer))
instead of 96 (SCSI_SENSE_BUFFERSIZE). I did not check whether we
actually need to initialize the buffer here, but it's clear that if we
do it, we should use the correct size.
Fixes:
de25deb18016 ("[SCSI] use dynamically allocated sense buffer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Christopher Díaz Riveros [Thu, 18 Jan 2018 01:38:39 +0000 (20:38 -0500)]
scsi: ibmvfc: Remove unneeded semicolons
Trivial fix removes unneeded semicolons after switch blocks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Christopher Díaz Riveros <chrisadr@gentoo.org>
Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Wed, 17 Jan 2018 16:46:54 +0000 (00:46 +0800)]
scsi: hisi_sas: fix a bug in hisi_sas_dev_gone()
When device gone, NULL pointer can be accessed in free_device callback
if during SAS controller reset as we clear structure sas_dev prior.
Actually we can only set dev_type as SAS_PHY_UNUSED and not clear
structure sas_dev as all the members of structure sas_dev will be
re-initialized after device found.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Wed, 17 Jan 2018 16:46:53 +0000 (00:46 +0800)]
scsi: hisi_sas: directly attached disk LED feature for v2 hw
This patch implements LED feature of directly attached disk for v2 hw.
As libsas has provided an interface lldd_write_gpio() for this feature,
we just need realise the interface following SPGIO API.
We use an CPLD to finish the hardware part of this feature, and the base
address of CPLD should be configured through ACPI or DT tables.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Wed, 17 Jan 2018 16:46:52 +0000 (00:46 +0800)]
scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw
Add directly attached disk LED feature for v2 hw.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:33:04 +0000 (05:33 -0800)]
scsi: megaraid_sas: NVMe passthrough command support
NVMe passthrough via MFI interface. Current MegaRAID product supports
different types of encapsulation via the MFI framework.
NVMe native command should be framed by application and it should be
embedded in MFI as payload. The driver will provide interface to send
the MFI frame along with the payload (in this case, payload is NVMe
native command) to the firmware. Driver already has an existing, similar
interface for SATA and SMP passthrough.
1. Driver will pass MFI command to the firmware if the latter supports
NVMe encapsulated processing (not all SAS3.5 firmware supports this
feature).
2. Driver exposes sysfs entry support_nvme_encapsulation. This is
required for backward compatibility for applications using earlier
driver versions that did not process IOCTL frames and could result in
host hang.
This is already fixed as part of commit
82add4e1b354 ("scsi:
megaraid_sas: Incorrect processing of IOCTL frames for SMP/STP
commands")
[mkp: clarified commit message]
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Wed, 17 Jan 2018 14:48:51 +0000 (15:48 +0100)]
scsi: megaraid: use ktime_get_real for firmware time
do_gettimeofday() overflows in 2038 on 32-bit architectures and is
deprecated, so convert this driver to call ktime_get_real()
directly. This also simplifies the calculation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Wed, 17 Jan 2018 15:16:48 +0000 (16:16 +0100)]
scsi: fnic: use 64-bit timestamps
struct timespec is deprecated since it overflows in 2038 on 32-bit
architectures, so we should use timespec64 consistently.
I'm slightly adapting the format strings here, to make sure we print the
nanoseconds with the correct number of leading zeroes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Wei Yongjun [Wed, 17 Jan 2018 12:42:41 +0000 (12:42 +0000)]
scsi: qedf: Fix error return code in __qedf_probe()
Fix to return error code -ENOMEM from the error handling case instead of
0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xose Vazquez Perez [Mon, 15 Jan 2018 16:47:23 +0000 (17:47 +0100)]
scsi: devinfo: fix format of the device list
Replace "" with NULL for product revision level, and merge TEXEL
duplicate entries.
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
himanshu.madhani@cavium.com [Tue, 16 Jan 2018 04:46:53 +0000 (20:46 -0800)]
scsi: qla2xxx: Update driver version to 10.00.00.05-k
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Anil Gurumurthy [Tue, 16 Jan 2018 04:46:52 +0000 (20:46 -0800)]
scsi: qla2xxx: Add XCB counters to debugfs
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Darren Trapp [Tue, 16 Jan 2018 04:46:51 +0000 (20:46 -0800)]
scsi: qla2xxx: Fix queue ID for async abort with Multiqueue
[mkp: sparse warning]
Signed-off-by: Darren Trapp <darren.trapp@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
himanshu.madhani@cavium.com [Tue, 16 Jan 2018 04:46:50 +0000 (20:46 -0800)]
scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event()
This patch fixes following smatch warning:
drivers/scsi/qla2xxx/qla_init.c:1054 __qla24xx_handle_gpdb_event() warn: inconsistent indenting
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
himanshu.madhani@cavium.com [Tue, 16 Jan 2018 04:46:49 +0000 (20:46 -0800)]
scsi: qla2xxx: Fix warning during port_name debug print
This patch fixes following smatch warning:
drivers/scsi/qla2xxx/qla_iocb.c:2622 qla2x00_els_dcmd2_sp_done() error: '%pC' expects argument of type 'struct clk*', argument 8 has type 'uchar[]'
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
himanshu.madhani@cavium.com [Tue, 16 Jan 2018 04:46:48 +0000 (20:46 -0800)]
scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
This patch fixes following Smatch warning:
drivers/scsi/qla2xxx/qla_init.c:130 qla2x00_async_iocb_timeout() error: we previously assumed 'fcport' could be null (see line 107)
Fixes:
5c25d451163c ("scsi: qla2xxx: Fix NULL pointer access for fcport structure")
Reported by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
himanshu.madhani@cavium.com [Tue, 16 Jan 2018 04:46:47 +0000 (20:46 -0800)]
scsi: qla2xxx: Fix recursion while sending terminate exchange
During error test case where switch port status is toggled from enable to
disable, following stack trace is seen which indicates recursion trying to
send terminate exchange. This regression was introduced by commit
82de802ad46e ("scsi: qla2xxx: Preparation for Target MQ.")
BUG: stack guard page was hit at
ffffb96488383ff8 (stack is
ffffb96488384000..
ffffb96488387fff)
BUG: stack guard page was hit at
ffffb964886c3ff8 (stack is
ffffb964886c4000..
ffffb964886c7fff)
kernel stack overflow (double-fault): 0000 [#1] SMP
qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx]
qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx]
qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx]
qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx]
qlt_term_ctio_exchange+0x9c/0xb0 [qla2xxx]
Fixes:
82de802ad46e ("scsi: qla2xxx: Preparation for Target MQ.")
Cc: <stable@vger.kernel.org> #4.10
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
himanshu.madhani@cavium.com [Tue, 16 Jan 2018 04:46:46 +0000 (20:46 -0800)]
scsi: qla2xxx: Fix NULL pointer crash due to probe failure
This patch fixes regression added by commit
d74595278f4ab
("scsi: qla2xxx: Add multiple queue pair functionality.").
When driver is not able to get reqeusted IRQs from the system, driver will
attempt tp clean up memory before failing hardware probe. During this cleanup,
driver assigns NULL value to the pointer which has not been allocated by
driver yet. This results in a NULL pointer access.
Log file will show following message and stack trace
qla2xxx [0000:a3:00.1]-00c7:21: MSI-X: Failed to enable support, giving up -- 32/-1.
qla2xxx [0000:a3:00.1]-0037:21: Falling back-to MSI mode --1.
qla2xxx [0000:a3:00.1]-003a:21: Failed to reserve interrupt 821 already in use.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<
ffffffffc010c4b6>] qla2x00_probe_one+0x18b6/0x2730 [qla2xxx]
PGD 0
Oops: 0002 [#1] SMP
Fixes:
d74595278f4ab ("scsi: qla2xxx: Add multiple queue pair functionality.").
Cc: <stable@vger.kernel.org> # 4.10
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Tue, 16 Jan 2018 19:08:15 +0000 (19:08 +0000)]
scsi: mptsas: remove duplicated assignment to pointer head
The pointer head is re-assigned the same value twice, so remove the
second redundant assignment.
Cleans up clang warning:
drivers/message/fusion/mptsas.c:1161:20: warning: Value stored to 'head'
during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Tue, 16 Jan 2018 10:40:22 +0000 (13:40 +0300)]
scsi: storvsc: missing error code in storvsc_probe()
We should set the error code if fc_remote_port_add() fails.
Cc: <stable@vger.kernel.org> #v4.12+
Fixes:
daf0cd445a21 ("scsi: storvsc: Add support for FC rport.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cathy Avery <cavery@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Andy Shevchenko [Mon, 15 Jan 2018 17:05:58 +0000 (19:05 +0200)]
scsi: mptfusion: Use snprintf() instead of open coded divisions
Numbers up to 100 snprintf() prints without using a division. Besides
that the code looks more readable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Thu, 11 Jan 2018 16:55:39 +0000 (16:55 +0000)]
scsi: mpt3sas: make function _get_st_from_smid static
The function _get_st_from_smid is local to the source and does not need
to be in global scope, so make it static.
Cleans up sparse warning:
symbol '_get_st_from_smid' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Wei Yongjun [Thu, 11 Jan 2018 11:13:58 +0000 (11:13 +0000)]
scsi: hisi_sas: make local symbol host_attrs static
Fixes the following sparse warning:
drivers/scsi/hisi_sas/hisi_sas_main.c:1691:25: warning:
symbol 'host_attrs' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Douglas Gilbert [Wed, 10 Jan 2018 21:57:31 +0000 (16:57 -0500)]
scsi: scsi_debug: delay stress fix
Introduce a state enum into sdebug_defer objects to indicate which, if
any, defer method has been used with the associated command. Also add 2
bools to indicate which of the defer methods has been initialized. Those
objects are re-used but the initialization only needs to be done
once. This simplifies command cancellation handling.
Now the delay associated with a deferred response of a command cannot be
changed (once started) by changing the delay (and ndelay) parameters in
sysfs. Command aborts and driver shutdown are still honoured immediately
when received.
[mkp: applied by hand]
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rasmus Villemoes [Mon, 8 Jan 2018 23:11:15 +0000 (00:11 +0100)]
scsi: fnic: use kzalloc in fnic_fcoe_process_vlan_resp
This saves a little .text and gets rid of the unmotivated line break and
the sizeof(...) style inconsistency.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:49 +0000 (05:27 -0800)]
scsi: megaraid_sas: driver version upgrade
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:47 +0000 (05:27 -0800)]
scsi: megaraid_sas: re-work DCMD refire code
No functional changes.
This patch is a re-work of DCMD refire code to better manage all the
different cases to decide whether to REFIRE or SKIP or COMPLETE certain
DCMD.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:46 +0000 (05:27 -0800)]
scsi: megaraid_sas: Expose fw_cmds_outstanding through sysfs
Expose FW outstanding commands (fw_outstanding) through sysfs interface.
This helps in debugging certain performance issues in the field.
Signed-off-by: Sasikumar Chandrasekaran <sasikumar.pc@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:45 +0000 (05:27 -0800)]
scsi: megaraid_sas: Selectively apply stream detection based on IO type
Performance improvement:
Current driver calls stream detection unconditionally for all IOs.
Stream Detection logic is not required for most of the fast path IO. To
improve performance, avoid stream detection logic and do it only if
required.
Below are the cases where stream detection is required in driver:
1. All non-FastPath IOs (IOs going to FW)
2. Fast Path reads sent to ReadAhead capable VDs.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:44 +0000 (05:27 -0800)]
scsi: megaraid_sas: Update LD map after populating drv_map driver map copy
Issue – There may be some IO accessing incorrect raid map, but driver
has checks in IO path to handle those cases. It is always better to move
to new raid map only once raid map is populated and validated. No
functional defect. Fix is provided as part of review. Fix – Update
instance->map_id after driver has populated new driver raid map from
firmware raid map.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:43 +0000 (05:27 -0800)]
scsi: megaraid_sas: Use megasas_wait_for_adapter_operational to detect controller state in IOCTL path
In IOCTL path, re-use megasas_wait_for_adapter_operational API to detect
controller state. This will make driver to use this API uniformly in all
cases where we need to wait for adapter to become operational.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:42 +0000 (05:27 -0800)]
scsi: megaraid_sas: Avoid firing DCMDs while OCR is in progress
Driver needs to avoid PCI writes while OCR is in progress. Use
reset_mutex to synchronize between firing DCMDs MR_DCMD_PD_GET_INFO and
MR_DCMD_DRV_GET_TARGET_PROP while OCR is triggered. Without this fix,
if Device/VD add/creation is in progress and at the same time MR
Firmware is going through OCR, user may see OCR never completed and it
may need system reboot. This scenario is rare to occur. Fix is provided
as part of review.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:41 +0000 (05:27 -0800)]
scsi: megaraid_sas: unload flag should be set after scsi_remove_host is called
Issue - Driver returns DID_NO_CONNECT when unload is in progress,
indicated using instance->unload flag. In case of dynamic unload of
driver, this flag is set before calling scsi_remove_host(). While doing
manual driver unload, user will see lots of prints for Sync Cache
command with DID_NO_CONNECT status.
Fix - Set the instance->unload flag after scsi_remove_host(). Allow
device removal process to be completed and do not block any command
before that. SCSI commands (like SYNC_CACHE) are received (as part of
scsi_remove_host) by driver during unload will be submitted further down
to the drives.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:40 +0000 (05:27 -0800)]
scsi: megaraid_sas: Error handling for invalid ldcount provided by firmware in RAID map
Currently driver does not validate ldcount provided by firmware. If the
value is invalid, fail RAID map validation accordingly. This issue is
rare to hit in field and is fixed as part of code review.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:39 +0000 (05:27 -0800)]
scsi: megaraid_sas: Reset ldio_outstanding in megasas_resume
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:38 +0000 (05:27 -0800)]
scsi: megaraid_sas: Return the DCMD status from megasas_get_seq_num
In megasas_get_seq_num, the status of the DCMD fired to FW is not
returned, it always returns success. We could end up registering AEN
request with incorrect sequence number if the DCMD failed. Return the
DCMD status back to caller. This was discovered during code review and
very rare to see issue in field to see AEN request failed bt FW.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:37 +0000 (05:27 -0800)]
scsi: megaraid_sas: memset IOC INIT frame using correct size
Commit
b9637d14dc00 ("scsi: megaraid_sas: Resize MFA frame used for IOC
INIT to 4k") increased the size of IOC INIT frame to 4k. Need to use
updated size when memsetting init_frame.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Fri, 5 Jan 2018 13:27:36 +0000 (05:27 -0800)]
scsi: megaraid_sas: zero out IOC INIT and stream detection memory
Memory allocated for IOC_INIT command and stream detection array are not
zero'd before using. Use kzalloc instead of kmalloc to zero out the
memory allocated.
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Wed, 10 Jan 2018 22:41:45 +0000 (14:41 -0800)]
scsi: core: Change third __scsi_queue_insert() argument from int to bool
This patch does not change any functionality but makes the SCSI core
source code slightly easier to read.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Raghava Aditya Renukunta [Wed, 10 Jan 2018 21:13:10 +0000 (13:13 -0800)]
scsi: aacraid: Delay for rescan worker needs to be 10 seconds
The delay for the rescan worker needs to 10 seconds, missed the HZ in
there.
Fixes:
a1367e4adee207fe (scsi: aacraid: Reschedule host scan in case of failure)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Raghava Aditya Renukunta [Wed, 10 Jan 2018 21:13:09 +0000 (13:13 -0800)]
scsi: aacraid: Get correct lun count
The correct lun count needs to be divided by 24, missed it in the
previous patch set.
Fixes:
4b00022753550055 (scsi: aacraid: Create helper functions to get lun info)
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Fri, 22 Dec 2017 11:52:53 +0000 (12:52 +0100)]
scsi: scsi_dh_alua: skip RTPG for devices only supporting active/optimized
For hardware only supporting active/optimized there's no point in ever
re-issuing RTPG as the only new state we can possibly read is
active/optimized. This avoid spurious errors during path failover on
such arrays.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Sun, 7 Jan 2018 23:15:10 +0000 (23:15 +0000)]
scsi: bfa: use ARRAY_SIZE for array sizing calculation on array __pciids
Use the ARRAY_SIZE macro on array __pciids to determine size of the
array. Improvement suggested by coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Fri, 5 Jan 2018 15:50:37 +0000 (15:50 +0000)]
scsi: qla2xxx: remove redundant assignment of d
The initialization of d is redundant as this value is never read and it
is overwritten inside the subsequent for-loop. Remove this redundant
assignment.
Cleans up clang warning:
drivers/scsi/qla2xxx/qla_gs.c:3985:29: warning: Value stored to 'd'
during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Jha [Tue, 9 Jan 2018 09:06:52 +0000 (14:36 +0530)]
scsi: qedi: Use zeroing allocator instead of allocator/memset
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset
0.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Jha [Tue, 9 Jan 2018 09:06:51 +0000 (14:36 +0530)]
scsi: bnx2fc: Use zeroing allocator rather than allocator/memset
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset
0.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
chenxiang [Thu, 28 Dec 2017 10:20:47 +0000 (18:20 +0800)]
scsi: hisi_sas: Change frame type for SET MAX commands
According to ATA protocol, SET MAX commands belong to different frame
types. So judge features field of SET MAX commands to decide which
frame type they belongs to.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
chenxiang [Thu, 28 Dec 2017 10:20:46 +0000 (18:20 +0800)]
scsi: ata: enhance the definition of SET MAX feature field value
There are two other values for SET MAX feature field according to ata
protocol. So definite them.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Steffen Weber [Tue, 2 Jan 2018 18:24:09 +0000 (19:24 +0100)]
scsi: smartpqi: allow static build ("built-in")
If CONFIG_SCSI_SMARTPQI=y then don't build this driver as a module.
Signed-off-by: Steffen Weber <steffen.weber@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Douglas Gilbert [Sat, 23 Dec 2017 17:48:14 +0000 (12:48 -0500)]
scsi: scsi_debug: add resp_write_scat function
Add resp_write_scat() function to support decoding WRITE SCATTERED
(16 and 32). Also weave resp_write_scat() into the cdb decoding
logic.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Douglas Gilbert [Sat, 23 Dec 2017 17:48:13 +0000 (12:48 -0500)]
scsi: scsi_debug: ARRAY_SIZE and FF_MEDIA_IO
Reviewer suggested using the ARRAY_SIZE macro. That reduced one of the subtle
inter-dependencies in the parser's tables.
It is important that commands which simulate media access, indicate this in the
flags for that command. The flag to do that was FF_DIRECT_IO. On reflection
FF_MEDIA_IO seems a more accurate description.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Douglas Gilbert [Sat, 23 Dec 2017 17:48:12 +0000 (12:48 -0500)]
scsi: scsi_debug: do_device_access add sg offset argument
WRITE SCATTERED needs to take several "bites" out of the data-out buffer.
Expand the do_device_access() function to take a sg_skip argument.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Douglas Gilbert [Sat, 23 Dec 2017 17:48:11 +0000 (12:48 -0500)]
scsi: scsi_debug: fix group_number mask
Various cdb masks incorrectly assumed the GROUP NUMBER field
was 5 bits long. It is actually 6 bits long. Correct.
Also fix mask failure (in same byte) to allow DLD0 in READ(16)
and WRITE(16).
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Douglas Gilbert [Sat, 23 Dec 2017 17:48:10 +0000 (12:48 -0500)]
scsi: scsi_debug: tab, kstrto changes
Some of my development tools tend to add spaces (my preference) rather
than tabs (kernel convention). Running unexpand to clean these spaces
up found more of them than checkpatch.pl did. Then checkpatch.pl
complained about other style violations in those newly tabbed lines.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Suganath Prabu Subramani [Thu, 4 Jan 2018 12:57:11 +0000 (04:57 -0800)]
scsi: mpt3sas: lockless command submission
Performance improvement using block layer tag.
Curent driver gets scsiio tracker and free smid from link list and array
based tracking managed by driver. Accessing list in main io path is
performance pentaly because of protection using spinlock
"scsi_lookup_lock".
In this patch:
1. Driver removes all link list access from main io path and
use scmd->request->tag to get free smid.
2. Instead of holding 'struct scsiio_tracker' in its own pool
driver can embed it into the scsi command.
Driver provides cmd_size in scsi_host_template, so that struct
scsiio_tracker is preallocated by scsi mid layer for each scsi command.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Thu, 4 Jan 2018 12:57:10 +0000 (04:57 -0800)]
scsi: mpt3sas: simplify _wait_for_commands_to_complete()
Use 'host_busy' instead of counting outstanding commands by hand.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Thu, 4 Jan 2018 12:57:09 +0000 (04:57 -0800)]
scsi: mpt3sas: simplify mpt3sas_scsi_issue_tm()
Move the check for outstanding commands out of the function allowing us
to simplify the overall code.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Thu, 4 Jan 2018 12:57:08 +0000 (04:57 -0800)]
scsi: mpt3sas: simplify task management functions
No functional change. Code optimization.
One can simply check 'target_busy' or 'device_busy' when figuring out if
there are outstanding commands; no need to painstakingly count them by
hand.
[mkp: tweaked patch description]
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Thu, 4 Jan 2018 12:57:07 +0000 (04:57 -0800)]
scsi: mpt3sas: always use first reserved smid for ioctl passthrough
ioctl passthrough commands require a SCSIIO smid, but cannot easily
integrate with the block layer. But the driver already has reserved some
SCSIIO smids and we're only ever allowing one ioctl command at a time we
can use the first reserved smid for ioctl commands.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Thu, 4 Jan 2018 12:57:06 +0000 (04:57 -0800)]
scsi: mpt3sas: check command status before attempting abort
When attempting a command abort we should check the command status prior
to sending the abort; the command might've been completed already.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Thu, 4 Jan 2018 12:57:05 +0000 (04:57 -0800)]
scsi: mpt3sas: Introduce mpt3sas_get_st_from_smid()
Abstract accesses to the scsi_lookup array by introducing
mpt3sas_get_st_from_smid().
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Thu, 4 Jan 2018 12:57:04 +0000 (04:57 -0800)]
scsi: mpt3sas: open-code _scsih_scsi_lookup_get()
Just a wrapper around the scsi lookup array and only used in one place,
so open-code it.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Thu, 4 Jan 2018 12:57:03 +0000 (04:57 -0800)]
scsi: mpt3sas: separate out _base_recovery_check()
No functional change.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Thu, 4 Jan 2018 12:57:02 +0000 (04:57 -0800)]
scsi: mpt3sas: use list_splice_init()
Use 'list_splice_init()' instead of hand-crafted function. No
functional change.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Thu, 4 Jan 2018 12:57:01 +0000 (04:57 -0800)]
scsi: mpt3sas: set default value for cb_idx
No functional change
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Matthew R. Ochs [Wed, 3 Jan 2018 22:55:26 +0000 (16:55 -0600)]
scsi: cxlflash: Staging to support future accelerators
As staging to support future accelerator transports, add a shim layer
such that the underlying services the cxlflash driver requires can be
conditional upon the accelerator infrastructure.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Uma Krishnan [Wed, 3 Jan 2018 22:55:04 +0000 (16:55 -0600)]
scsi: cxlflash: Adapter context init can return error
Adapter context creation can return either NULL or an error pointer.
Updating the check condition to reflect this.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Matthew R. Ochs [Wed, 3 Jan 2018 22:54:50 +0000 (16:54 -0600)]
scsi: cxlflash: Remove embedded CXL work structures
The CXL-specific work structure used to request the number of interrupts
currently resides as a nested member of both the context information and
hardware queue structures. It is used to cache values (specifically the
number of interrupts) required by the CXL layer when starting a context.
To facilitate staging that will ultimately allow the cxlflash core to
become agnostic of the underlying accelerator transport, remove these
embedded work structures.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Matthew R. Ochs [Wed, 3 Jan 2018 22:54:37 +0000 (16:54 -0600)]
scsi: cxlflash: Explicitly cache number of interrupts per context
The number of interrupts a user requests during a context attach is
presently stored within the CXL work ioctl structure that is nested
alongside the per context metadata. Keeping this data in a structure
that is tied to a particular hardware implementation (CXL) will only
complicate matters when supporting newer accelerator transports.
Instead of relying upon the number of interrupts being cached within
a CXL-specific structure, explicitly cache the value within the context
information structure.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Uma Krishnan [Wed, 3 Jan 2018 22:54:25 +0000 (16:54 -0600)]
scsi: cxlflash: Update cxl-specific arguments to generic cookie
Convert cxl-specific pointers to generic cookies to facilitate future
enhancements.
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Uma Krishnan [Wed, 3 Jan 2018 22:54:02 +0000 (16:54 -0600)]
scsi: cxlflash: Reset command ioasc
In the event of a command failure, cxlflash returns the failure to the upper
layers to process. After processing the error, when the command is queued
again, the private command structure will not be zeroed and the ioasc could be
stale. Per the SISLite specification, the AFU only sets the ioasc in the
presence of a failure. Thus, even though the original command succeeds the
second time, the command is considered a failure due to stale ioasc. This
cycle repeats indefinitely and can cause a hang or IO failure.
To fix the issue, clear the ioasc before queuing any command.
[mkp: added Cc: stable per request]
Fixes:
479ad8e9d48c ("scsi: cxlflash: Remove zeroing of private command data")
Cc: <stable@vger.kernel.org>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Fri, 8 Dec 2017 09:42:10 +0000 (17:42 +0800)]
scsi: libsas: notify event PORTE_BROADCAST_RCVD in sas_enable_revalidation()
There are two places queuing the disco event DISCE_REVALIDATE_DOMAIN.
One is in sas_porte_broadcast_rcvd() and uses sas_chain_event() to queue
the event. The other is in sas_enable_revalidation() and uses
sas_queue_event() to queue the event. We have diffrent work queues for
event and discovery now, so the DISCE_REVALIDATE_DOMAIN event may be
processed in both event queue and discovery queue.
Now since we do synchronous event handling, we cannot do it in discovery
queue, so have to trigger a fake broadcast event to re-trigger the
revalidation from event queue.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Fri, 8 Dec 2017 09:42:09 +0000 (17:42 +0800)]
scsi: libsas: direct call probe and destruct
In commit
87c8331fcf72 ("[SCSI] libsas: prevent domain rediscovery
competing with ata error handling") introduced disco mutex to prevent
rediscovery competing with ata error handling and put the whole
revalidation in the mutex. But the rphy add/remove needs to wait for the
error handling which also grabs the disco mutex. This may leads to dead
lock.So the probe and destruct event were introduce to do the rphy
add/remove asynchronously and out of the lock.
The asynchronously processed workers makes the whole discovery process
not atomic, the other events may interrupt the process. For example,
if a loss of signal event inserted before the probe event, the
sas_deform_port() is called and the port will be deleted.
And sas_port_delete() may run before the destruct event, but the
port-x:x is the top parent of end device or expander. This leads to
a kernel WARNING such as:
[ 82.042979] sysfs group 'power' not found for kobject 'phy-1:0:22'
[ 82.042983] ------------[ cut here ]------------
[ 82.042986] WARNING: CPU: 54 PID: 1714 at fs/sysfs/group.c:237
sysfs_remove_group+0x94/0xa0
[ 82.043059] Call trace:
[ 82.043082] [<
ffff0000082e7624>] sysfs_remove_group+0x94/0xa0
[ 82.043085] [<
ffff00000864e320>] dpm_sysfs_remove+0x60/0x70
[ 82.043086] [<
ffff00000863ee10>] device_del+0x138/0x308
[ 82.043089] [<
ffff00000869a2d0>] sas_phy_delete+0x38/0x60
[ 82.043091] [<
ffff00000869a86c>] do_sas_phy_delete+0x6c/0x80
[ 82.043093] [<
ffff00000863dc20>] device_for_each_child+0x58/0xa0
[ 82.043095] [<
ffff000008696f80>] sas_remove_children+0x40/0x50
[ 82.043100] [<
ffff00000869d1bc>] sas_destruct_devices+0x64/0xa0
[ 82.043102] [<
ffff0000080e93bc>] process_one_work+0x1fc/0x4b0
[ 82.043104] [<
ffff0000080e96c0>] worker_thread+0x50/0x490
[ 82.043105] [<
ffff0000080f0364>] kthread+0xfc/0x128
[ 82.043107] [<
ffff0000080836c0>] ret_from_fork+0x10/0x50
Make probe and destruct a direct call in the disco and revalidate function,
but put them outside the lock. The whole discovery or revalidate won't
be interrupted by other events. And the DISCE_PROBE and DISCE_DESTRUCT
event are deleted as a result of the direct call.
Introduce a new list to destruct the sas_port and put the port delete after
the destruct. This makes sure the right order of destroying the sysfs
kobject and fix the warning above.
In sas_ex_revalidate_domain() have a loop to find all broadcasted
device, and sometimes we have a chance to find the same expander twice.
Because the sas_port will be deleted at the end of the whole revalidate
process, sas_port with the same name cannot be added before this.
Otherwise the sysfs will complain of creating duplicate filename. Since
the LLDD will send broadcast for every device change, we can only
process one expander's revalidation.
[mkp: kbuild test robot warning]
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Fri, 8 Dec 2017 09:42:08 +0000 (17:42 +0800)]
scsi: libsas: use flush_workqueue to process disco events synchronously
Now we are processing sas event and discover event in different
workqueues. It's safe to wait the discover event done in the sas event
work. Use flush_workqueue() to insure the disco and revalidate events
processed synchronously so that the whole discover and revalidate
process will not be interrupted by other events.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Fri, 8 Dec 2017 09:42:07 +0000 (17:42 +0800)]
scsi: libsas: Use new workqueue to run sas event and disco event
Now all libsas works are queued to scsi host workqueue, include sas
event work post by LLDD and sas discovery work, and a sas hotplug flow
may be divided into several works, e.g libsas receive a
PORTE_BYTES_DMAED event, currently we process it as following steps:
sas_form_port --- run in work in shost workq
sas_discover_domain --- run in another work in shost workq
...
sas_probe_devices --- run in new work in shost workq
We found during hot-add a device, libsas may need run several
works in same workqueue to add device in system, the process is
not atomic, it may interrupt by other sas event works, like
PHYE_LOSS_OF_SIGNAL.
This patch is preparation of execute libsas sas event in sync. We need
to use different workqueue to run sas event and disco event. Otherwise
the work will be blocked for waiting another chained work in the same
workqueue.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Fri, 8 Dec 2017 09:42:06 +0000 (17:42 +0800)]
scsi: libsas: make the event threshold configurable
Add a sysfs attr that LLDD can configure it for every host. We made an
example in hisi_sas. Other LLDDs using libsas can implement it if they
want.
Suggested-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Acked-by: John Garry <john.garry@huawei.com> #for hisi_sas part
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Fri, 8 Dec 2017 09:42:05 +0000 (17:42 +0800)]
scsi: libsas: shut down the PHY if events reached the threshold
If the PHY burst too many events, we will alloc a lot of events for the
worker. This may leads to memory exhaustion.
Dan Williams suggested to shut down the PHY if the events reached the
threshold, because in this case the PHY may have gone into some
erroneous state. Users can re-enable the PHY by sysfs if they want.
We cannot use the fixed memory pool because if we run out of events, the
shut down event and loss of signal event will lost too. The events still
need to be allocated and processed in this case.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Fri, 8 Dec 2017 09:42:04 +0000 (17:42 +0800)]
scsi: libsas: Use dynamic alloced work to avoid sas event lost
Now libsas hotplug work is static, every sas event type has its own
static work, LLDD driver queues the hotplug work into shost->work_q. If
LLDD driver burst posts lots hotplug events to libsas, the hotplug
events may pending in the workqueue like
shost->work_q
new work[PORTE_BYTES_DMAED] --> |[PHYE_LOSS_OF_SIGNAL][PORTE_BYTES_DMAED] -> processing
|<-------wait worker to process-------->|
In this case, a new PORTE_BYTES_DMAED event coming, libsas try to queue
it to shost->work_q, but this work is already pending, so it would be
lost. Finally, libsas delete the related sas port and sas devices, but
LLDD driver expect libsas add the sas port and devices(last sas event).
This patch use dynamic allocated work to avoid this issue.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiongfeng Wang [Mon, 8 Jan 2018 12:49:13 +0000 (20:49 +0800)]
scsi: mptfusion: use strlcpy() instead of strncpy()
gcc-8 reports
drivers/message/fusion/mptbase.c: In function 'mpt_display_event_info':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 100 equals destination size [-Wstringop-truncation]
We need to use strlcpy() to make sure the dest string is nul-terminated.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Fri, 5 Jan 2018 15:31:06 +0000 (15:31 +0000)]
scsi: aacraid: remove redundant setting of variable c
A previous commit no longer stores the contents of c, so we now have a
situation where c is being updated but the value is never read. Clean up
the code by removing the now redundant setting of variable c.
Cleans up clang warning:
drivers/scsi/aacraid/aachba.c:943:3: warning: Value stored to 'c' is
never read
Fixes:
f4e8708d3104 ("scsi: aacraid: Fix udev inquiry race condition")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Varun Prakash [Thu, 4 Jan 2018 15:34:17 +0000 (21:04 +0530)]
scsi: libcxgbi: use GFP_ATOMIC in cxgbi_conn_alloc_pdu()
For mgmt cmds ->alloc_pdu() can be called from atomic context so use
GFP_ATOMIC instead of GFP_KERNEL.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
chenxiang [Thu, 4 Jan 2018 13:04:33 +0000 (21:04 +0800)]
scsi: libsas: initialize sas_phy status according to response of DISCOVER
The status of SAS PHY is in sas_phy->enabled. There is an issue that the
status of a remote SAS PHY may be initialized incorrectly: if disable
remote SAS PHY through sysfs interface (such as echo 0 >
/sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we
will find the status of remote SAS PHY which is disabled before is
1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of
remote SAS PHY is disabled and the device attached is not found.
In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response
is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled
according to the value of NEGOTIATED LOGICAL LINK RATE field.
Signed-off-by: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Thu, 4 Jan 2018 13:04:32 +0000 (21:04 +0800)]
scsi: libsas: fix error when getting phy events
The intend purpose here was to goto out if smp_execute_task() returned
error. Obviously something got screwed up. We will never get these link
error statistics below:
~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count
0
~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count
0
Obviously we should goto error handler if smp_execute_task() returns
non-zero.
Fixes:
2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: chenqilin <chenqilin2@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jason Yan [Thu, 4 Jan 2018 13:04:31 +0000 (21:04 +0800)]
scsi: libsas: fix memory leak in sas_smp_get_phy_events()
We've got a memory leak with the following producer:
while true;
do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null;
done
The buffer req is allocated and not freed after we return. Fix it.
Fixes:
2908d778ab3e ("[SCSI] aic94xx: new driver")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: chenqilin <chenqilin2@huawei.com>
CC: chenxiang <chenxiang66@hisilicon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Andy Shevchenko [Tue, 19 Dec 2017 17:09:59 +0000 (19:09 +0200)]
scsi: hpsa: Use vsnprintf extension %phN
Using this extension reduces the object size.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Jha [Sat, 30 Dec 2017 15:28:32 +0000 (20:58 +0530)]
scsi: bnx2i: Use zeroing allocator rather than allocator/memset
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by
memset 0.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Jha [Sat, 30 Dec 2017 15:28:31 +0000 (20:58 +0530)]
scsi: bfa: Use zeroing allocator rather than allocator/memset
Use vzalloc instead of vmalloc followed by memset 0.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Jha [Sat, 30 Dec 2017 15:28:25 +0000 (20:58 +0530)]
scsi: qla2xxx: Use zeroing allocator rather than allocator/memset
Use dma_zalloc_coherent and vzalloc instead of dma_alloc_coherent and
vmalloc respectively, followed by memset 0.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Jha [Sat, 30 Dec 2017 15:28:24 +0000 (20:58 +0530)]
scsi: qla4xxx: Use zeroing allocator rather than allocator/memset
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset
0.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>