Krzysztof Kozlowski [Sun, 16 Apr 2023 12:37:26 +0000 (14:37 +0200)]
arm64: dts: qcom: ipq8074: drop incorrect SPI bus spi-max-frequency
The spi-max-frequency property belongs to SPI devices, not SPI
controller:
ipq8074-hk01.dtb: spi@78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sun, 16 Apr 2023 12:37:25 +0000 (14:37 +0200)]
arm64: dts: qcom: ipq6018: drop incorrect SPI bus spi-max-frequency
The spi-max-frequency property belongs to SPI devices, not SPI
controller:
ipq6018-cp01-c1.dtb: spi@78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230416123730.300863-1-krzysztof.kozlowski@linaro.org
Vignesh Viswanathan [Fri, 26 May 2023 11:06:53 +0000 (16:36 +0530)]
arm64: dts: qcom: add few more reserved memory region
In IPQ SoCs, bootloader will collect the system RAM contents upon crash
for the post morterm analysis. If we don't reserve the memory region used
by bootloader, obviously linux will consume it and upon next boot on
crash, bootloader will be loaded in the same region, which will lead to
loose some of the data, sometimes we may miss out critical information.
So lets reserve the region used by the bootloader.
Similarly SBL copies some data into the reserved region and it will be
used in the crash scenario. So reserve 1MB for SBL as well.
While at it, drop the size padding in the reserved memory region,
wherever applicable.
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526110653.27777-4-quic_viswanat@quicinc.com
Vignesh Viswanathan [Fri, 26 May 2023 11:06:52 +0000 (16:36 +0530)]
arm64: dts: qcom: enable the download mode support
Like any other Qualcomm SoCs, IPQ8074 and IPQ6018 also supports the
download mode to collect the RAM dumps if system crashes, to perform
the post mortem analysis. Add support for the same.
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526110653.27777-3-quic_viswanat@quicinc.com
Neil Armstrong [Fri, 26 May 2023 19:22:10 +0000 (00:52 +0530)]
arm64: dts: qcom: sm8450: add crypto nodes
Add crypto engine (CE) and CE BAM related nodes and definitions
for the SM8450 SoC.
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
[Bhupesh: Corrected the compatible list]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-12-bhupesh.sharma@linaro.org
Bhupesh Sharma [Fri, 26 May 2023 19:22:09 +0000 (00:52 +0530)]
arm64: dts: qcom: sm8350: Add Crypto Engine support
Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm8350.dtsi'.
Co-developed-by and Signed-off-by: Robert Foss <rfoss@kernel.org>
[Bhupesh: Switch to '#interconnect-cells = <2>', available since commit
4f287e31ff5f]
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-11-bhupesh.sharma@linaro.org
Bhupesh Sharma [Fri, 26 May 2023 19:22:08 +0000 (00:52 +0530)]
arm64: dts: qcom: sm8250: Add Crypto Engine support
Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm8250.dtsi'.
Co-developed-by and Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-10-bhupesh.sharma@linaro.org
Bhupesh Sharma [Fri, 26 May 2023 19:22:07 +0000 (00:52 +0530)]
arm64: dts: qcom: sm8150: Add Crypto Engine support
Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm8150.dtsi'.
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-9-bhupesh.sharma@linaro.org
Bhupesh Sharma [Fri, 26 May 2023 19:22:06 +0000 (00:52 +0530)]
arm64: dts: qcom: sm6115: Add Crypto Engine support
Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm6115.dtsi'.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-8-bhupesh.sharma@linaro.org
Bhupesh Sharma [Fri, 26 May 2023 19:22:03 +0000 (00:52 +0530)]
arm64: dts: qcom: sdm845: Fix the slimbam DMA engine compatible string
As per documentation, Qualcomm SDM845 SoC supports SLIMBAM DMA
engine v1.7.4, so use the correct compatible strings.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-5-bhupesh.sharma@linaro.org
Bhupesh Sharma [Fri, 26 May 2023 19:22:02 +0000 (00:52 +0530)]
arm64: dts: qcom: sdm8550: Fix the BAM DMA engine compatible string
As per documentation, Qualcomm SM8550 SoC supports BAM DMA
engine v1.7.4, so use the correct compatible strings.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526192210.3146896-4-bhupesh.sharma@linaro.org
Kathiravan T [Fri, 26 May 2023 12:53:05 +0000 (18:23 +0530)]
arm64: dts: qcom: ipq9574: add QFPROM node
IPQ9574 has efuse region to determine the various HW quirks. Lets
add the initial support and the individual fuses will be added as they
are required.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-5-quic_kathirav@quicinc.com
Kathiravan T [Fri, 26 May 2023 12:53:04 +0000 (18:23 +0530)]
arm64: dts: qcom: ipq6018: add QFPROM node
IPQ6018 has efuse region to determine the various HW quirks. Lets
add the initial support and the individual fuses will be added as they
are required.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-4-quic_kathirav@quicinc.com
Kathiravan T [Fri, 26 May 2023 12:53:03 +0000 (18:23 +0530)]
arm64: dts: qcom: ipq5332: add QFPROM node
IPQ5332 has efuse region to determine the various HW quirks. Lets
add the initial support and the individual fuses will be added as they
are required.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-3-quic_kathirav@quicinc.com
Kathiravan T [Fri, 26 May 2023 12:53:02 +0000 (18:23 +0530)]
dt-bindings: nvmem: qfprom: add compatible for few IPQ SoCs
Add the QFPROM compatible for IPQ5332, IPQ6018 and IPQ9574
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526125305.19626-2-quic_kathirav@quicinc.com
Devi Priya [Fri, 26 May 2023 15:31:52 +0000 (21:01 +0530)]
arm64: dts: qcom: ipq9574: add support for RDP453 variant
Add the initial device tree support for the Reference Design Platform (RDP)
453 based on IPQ9574 family of SoCs. This patch adds support for Console
UART, SPI NOR and SMPA1 regulator node.
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526153152.777-3-quic_devipriy@quicinc.com
Devi Priya [Fri, 26 May 2023 15:31:51 +0000 (21:01 +0530)]
dt-bindings: arm: qcom: document AL02-C8 board based on IPQ9574 family
Document AL02-C8 (Reference Design Platform 453) board based on IPQ9574
family of SoCs.
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526153152.777-2-quic_devipriy@quicinc.com
Devi Priya [Tue, 16 May 2023 13:50:13 +0000 (19:20 +0530)]
arm64: dts: qcom: ipq9574: add support for RDP449 variant
Add the initial device tree support for the Reference Design Platform (RDP)
449 based on IPQ9574 family of SoCs. This patch adds support for Console
UART, SPI NOR and SMPA1 regulator node.
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516135013.3547-3-quic_devipriy@quicinc.com
Devi Priya [Tue, 16 May 2023 13:50:12 +0000 (19:20 +0530)]
dt-bindings: arm: qcom: document AL02-C6 board based on IPQ9574 family
Document AL02-C6 (Reference Design Platform 449) board based on IPQ9574
family of SoCs.
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516135013.3547-2-quic_devipriy@quicinc.com
Devi Priya [Wed, 10 May 2023 10:43:59 +0000 (16:13 +0530)]
arm64: dts: qcom: ipq9574: add support for RDP418 variant
Add the initial device tree support for the Reference Design Platform (RDP)
418 based on IPQ9574 family of SoCs. This patch adds support for Console
UART, SPI NOR, eMMC and SMPA1 regulator node.
Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510104359.16678-3-quic_devipriy@quicinc.com
Devi Priya [Wed, 10 May 2023 10:43:58 +0000 (16:13 +0530)]
dt-bindings: arm: qcom: document AL02-C2 board based on IPQ9574 family
Document AL02-C2 (Reference Design Platform 418) board based on IPQ9574
family of SoCs.
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510104359.16678-2-quic_devipriy@quicinc.com
Devi Priya [Wed, 17 May 2023 17:25:27 +0000 (22:55 +0530)]
arm64: dts: qcom: ipq9574: Add cpufreq support
Add cpu freq nodes in the device tree to bump cpu frequency above 800MHz.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517172527.1968-4-quic_devipriy@quicinc.com
Devi Priya [Wed, 17 May 2023 17:25:26 +0000 (22:55 +0530)]
arm64: dts: qcom: ipq9574: Add SMPA1 regulator node
Add support for SMPA1 regulator node in IPQ9574.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517172527.1968-3-quic_devipriy@quicinc.com
Devi Priya [Wed, 17 May 2023 17:25:25 +0000 (22:55 +0530)]
arm64: dts: qcom: ipq9574: Add RPM related nodes
Add RPM Glink & RPM message RAM nodes to support frequency scaling
on IPQ9574.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517172527.1968-2-quic_devipriy@quicinc.com
Devi Priya [Thu, 6 Apr 2023 06:13:13 +0000 (11:43 +0530)]
arm64: dts: qcom: ipq9574: Add support for APSS clock controller
Add the APCS & A73 PLL nodes to support CPU frequency scaling.
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230406061314.10916-5-quic_devipriy@quicinc.com
Devi Priya [Tue, 25 Apr 2023 08:40:10 +0000 (14:10 +0530)]
arm64: dts: qcom: ipq9574: rename al02-c7 dts to rdp433
Rename the dts after Reference Design Platform(RDP) to adopt
standard naming convention.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230425084010.15581-7-quic_devipriy@quicinc.com
Luca Weiss [Fri, 7 Apr 2023 07:45:44 +0000 (09:45 +0200)]
arm64: dts: qcom: pm7250b: add missing spmi-vadc include
This file is using definitions from the spmi-vadc header, so we need to
include it.
Fixes:
11975b9b8135 ("arm64: dts: qcom: Add pm7250b PMIC")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407-pm7250b-sid-v1-1-fc648478cc25@fairphone.com
Bryan O'Donoghue [Fri, 7 Apr 2023 19:49:05 +0000 (20:49 +0100)]
arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua
Add a basic booting DTS for the Sony Xperia M4 Aqua aka "tulip".
Tulip is paired with:
- wcn3660
- smb1360 battery charger
- 720p Truly NT35521 Panel
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-6-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Fri, 7 Apr 2023 19:49:04 +0000 (20:49 +0100)]
arm64: dts: qcom: Add Square apq8039-t2 board
The apq8039-t2 is an apq8039 based board paired with a wcn3680b WiFi
chipset.
Co-developed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Co-developed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Co-developed-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Benjamin Li <benl@squareup.com>
Co-developed-by: James Willcox <jwillcox@squareup.com>
Signed-off-by: James Willcox <jwillcox@squareup.com>
Co-developed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Co-developed-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Joseph Gates <jgates@squareup.com>
Co-developed-by: Max Chen <mchen@squareup.com>
Signed-off-by: Max Chen <mchen@squareup.com>
Co-developed-by: Zac Crosby <zac@squareup.com>
Signed-off-by: Zac Crosby <zac@squareup.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-5-bryan.odonoghue@linaro.org
Stephan Gerhold [Fri, 7 Apr 2023 19:49:03 +0000 (20:49 +0100)]
arm64: dts: qcom: Add msm8939-pm8916.dtsi include
The msm8939-pm8916.dtsi include configures the regulator supplies of
MSM8939 used together with PM8916, as recommended by Qualcomm. In rare
cases where boards deviate from the recommended design they can just
avoid using this include.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-4-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Fri, 7 Apr 2023 19:49:02 +0000 (20:49 +0100)]
arm64: dts: qcom: Add msm8939 SoC
Add msm8939 a derivative SoC of msm8916. This SoC contains a number of key
differences to msm8916.
- big.LITTLE Octa Core - quad 1.5GHz + quad 1.0GHz
- DRAM 1x800 LPDDR3
- Camera 4+4 lane CSI
- Venus @ 1080p60 HEVC
- DSI x 2
- Adreno A405
- WiFi wcn3660/wcn3680b 802.11ac
Co-developed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Co-developed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Co-developed-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Benjamin Li <benl@squareup.com>
Co-developed-by: James Willcox <jwillcox@squareup.com>
Signed-off-by: James Willcox <jwillcox@squareup.com>
Co-developed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Co-developed-by: Joseph Gates <jgates@squareup.com>
Signed-off-by: Joseph Gates <jgates@squareup.com>
Co-developed-by: Max Chen <mchen@squareup.com>
Signed-off-by: Max Chen <mchen@squareup.com>
Co-developed-by: Zac Crosby <zac@squareup.com>
Signed-off-by: Zac Crosby <zac@squareup.com>
Co-developed-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-3-bryan.odonoghue@linaro.org
Bryan O'Donoghue [Fri, 7 Apr 2023 19:49:01 +0000 (20:49 +0100)]
dt-bindings: vendor-prefixes: Add Square
Add vendor prefix for Square (https://squareup.com).
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407194905.611461-2-bryan.odonoghue@linaro.org
Rudraksha Gupta [Wed, 24 May 2023 23:03:37 +0000 (19:03 -0400)]
dt-bindings: arm: qcom: Add missing msm8960
The list of supported 'SoC's didn't include msm8960 even though
qcom,msm8960-cdp exists.
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524230338.120619-1-guptarud@gmail.com
Luca Weiss [Tue, 23 May 2023 20:41:29 +0000 (22:41 +0200)]
arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED
The phone features a notification LED connected to the pmi632. Configure
the RGB led found on it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230414-pmi632-v3-2-079d2cada699@z3ntu.xyz
Luca Weiss [Tue, 23 May 2023 20:41:28 +0000 (22:41 +0200)]
arm64: dts: qcom: Add PMI632 PMIC
The PMI632, commonly found on SoCs with SDM632 has various standard
functions like ADC, GPIOs, LPG and more.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230414-pmi632-v3-1-079d2cada699@z3ntu.xyz
Dylan Van Assche [Thu, 18 May 2023 13:31:13 +0000 (15:31 +0200)]
arm64: dts: qcom: sdm845-shift-axolotl: enable flash LEDs
The SHIFT6mq (axolotl) is an SDM845-based smartphone with 2 flash LEDs.
One LED is white, the other one is yellow. Define both LEDs in the DTS
so they can be used as flash or torch and enable the flash LED
controller to control them in PMI8998.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230518133113.273880-4-me@dylanvanassche.be
Dylan Van Assche [Thu, 18 May 2023 13:31:12 +0000 (15:31 +0200)]
arm64: dts: qcom: pmi8998: add flash LED controller
Qualcomm PMIC PMI8998 has a 3 channel flash LED driver which is used
by many phones for 1 or 2 flash LEDs. Each LED can be used in flash mode
or torch mode. Add the flash LED controller node to PMI8998 DTS.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230518133113.273880-3-me@dylanvanassche.be
Bhupesh Sharma [Thu, 18 May 2023 08:00:31 +0000 (13:30 +0530)]
arm64: dts: qcom: sm6115: Add CPU idle-states
Add CPU idle-state nodes and power-domains in Qualcomm sm6115 SoC dtsi.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230518080031.2509250-1-bhupesh.sharma@linaro.org
Stephan Gerhold [Wed, 17 May 2023 18:48:47 +0000 (20:48 +0200)]
arm64: dts: qcom: msm8916-pm8916: Mark always-on regulators
Some of the regulators must be always-on to ensure correct operation of
the system, e.g. PM8916 L2 for the LPDDR RAM, L5 for most digital I/O
and L7 for the CPU PLL (strictly speaking the CPU PLL might only need
an active-only vote but this is not supported for regulators in
mainline currently).
The RPM firmware seems to enforce that internally, these supplies stay
on even if we vote for them to power off (and there is no other
processor running). This means it's pointless to keep sending
enable/disable requests because they will just be ignored.
Also, drivers are much more likely to get a wrong impression of the
regulator status, because regulator_is_enabled() will return false when
there are no users, even though the regulator is always on.
Describe this properly by marking the regulators as always-on.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-8-54d4960a05fc@gerhold.net
Stephan Gerhold [Wed, 17 May 2023 18:48:46 +0000 (20:48 +0200)]
arm64: dts: qcom: msm8916: Define regulator constraints next to usage
Right now each MSM8916 device has a huge block of regulator constraints
with allowed voltages for each regulator. For lack of better
documentation these voltages are often copied as-is from the vendor
device tree, without much extra thought.
Unfortunately, the voltages in the vendor device trees are often
misleading or even wrong, e.g. because:
- There is a large voltage range allowed and the actual voltage is
only set somewhere hidden in some messy vendor driver. This is often
the case for pm8916_{l14,l15,l16} because they have a broad range of
1.8-3.3V by default.
- The voltage is actually wrong but thanks to the voltage constraints
in the RPM firmware it still ends up applying the correct voltage.
To have proper regulator constraints it is important to review them in
context of the usage. The current setup in the MSM8916 device trees
makes this quite hard because each device duplicates the standard
voltages for components of the SoC and mixes those with minor
device-specific additions and dummy voltages for completely unused
regulators.
The actual usage of the regulators for the SoC components is in
msm8916-pm8916.dtsi, so it can and should also define the related
voltage constraints. These are not board-specific but defined in the
APQ8016E/PM8916 Device Specification. The board DT can then focus on
describing the actual board-specific regulators, which makes it much
easier to review and spot potential mistakes there.
Note that this commit does not make any functional change. All used
regulators still have the same regulator constraints as before. Unused
regulators do not have regulator constraints anymore because most of
these were too broad or even entirely wrong. They should be added back
with proper voltage constraints when there is an actual usage.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-7-54d4960a05fc@gerhold.net
Stephan Gerhold [Wed, 17 May 2023 18:48:45 +0000 (20:48 +0200)]
arm64: dts: qcom: msm8916-pm8916: Clarify purpose
Goal of the msm8916-pm8916.dtsi is to reduce the boilerplate necessary
to create a device tree for a typical board with the MSM8916 SoC
combined with the PM8916 PMIC. > 99% of all MSM8916 boards use the same
standard setup where many of the PM8916 regulators have a fixed purpose
and only some are left up for board-specific use.
While MSM8916 (and perhaps MSM8939 soon) is currently the only platform
with such an include, it has definitely proven useful. With more than
30 boards using it (not all of them upstream yet) it simplifies the
review a lot and reduces the chance of configuring the standard
components incorrectly.
In preparation of extending its scope slightly, add a comment at the
top that clearly explains what the .dtsi represents and when it should
(or should not) be used.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-6-54d4960a05fc@gerhold.net
Stephan Gerhold [Wed, 17 May 2023 18:48:44 +0000 (20:48 +0200)]
arm64: dts: qcom: pm8916: Move default regulator "-supply"s
Some of the power supplies for the analog audio codec in PM8916 are
wired externally. While most boards use the regulators currently
specified in pm8916.dtsi, in theory it could be connected differently.
We already have msm8916-pm8916.dtsi that models that standard setup
used by most devices so move the -supply properties there and keep
the base pm8916.dtsi independent.
Currently all MSM8916 boards in mainline make use of
msm8916-pm8916.dtsi, so it is not necessary to adjust any other boards.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-5-54d4960a05fc@gerhold.net
Stephan Gerhold [Wed, 17 May 2023 18:48:43 +0000 (20:48 +0200)]
arm64: dts: qcom: msm8916: Disable audio codecs by default
Not every device has something connected to the digital audio codec
in MSM8916 and/or the analog audio codec in PM8916. Disable those by
default so the hardware is only powered up when necessary.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-4-54d4960a05fc@gerhold.net
Stephan Gerhold [Wed, 17 May 2023 18:48:42 +0000 (20:48 +0200)]
arm64: dts: qcom: msm8916: Fix regulator constraints
The regulator constraints for most MSM8916 devices (except DB410c) were
originally taken from Qualcomm's msm-3.10 vendor device tree (for lack
of better documentation). Unfortunately it turns out that Qualcomm's
voltages are slightly off as well and do not match the voltage
constraints applied by the RPM firmware.
This means that we sometimes request a specific voltage but the RPM
firmware actually applies a much lower or higher voltage. This is
particularly critical for pm8916_l11 which is used as SD card VMMC
regulator: The SD card can choose a voltage from the current range of
1.8 - 2.95V. If it chooses to run at 1.8V we pretend that this is fine
but the RPM firmware will still silently end up configuring 2.95V.
This can be easily reproduced with a multimeter or by checking the
SPMI hardware registers of the regulator.
Fix this by making the voltages match the actual "specified range" in
the PM8916 Device Specification which is enforced by the RPM firmware.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-3-54d4960a05fc@gerhold.net
Stephan Gerhold [Wed, 17 May 2023 18:48:41 +0000 (20:48 +0200)]
arm64: dts: qcom: apq8016-sbc: Fix 1.8V power rail on LS expansion
The 96Boards specification expects a 1.8V power rail on the low-speed
expansion connector that is able to provide at least 0.18W / 100 mA.
According to the DB410c hardware user manual this is done by connecting
both L15 and L16 in parallel with up to 55mA each (for 110 mA total) [1].
Unfortunately the current regulator setup in the DB410c device tree
does not implement the specification correctly and only provides 5 mA:
- Only L15 is marked always-on, so L16 is never enabled.
- Without specifying a load the regulator is put into LPM where
it can only provide 5 mA.
Fix this by:
- Adding proper voltage constraints for L16.
- Making L16 always-on.
- Adding regulator-system-load for both L15 and L16. 100 mA should be
available in total, so specify 50 mA for each. (The regulator
hardware can only be in normal (55 mA) or low-power mode (5 mA) so
this will actually result in the expected 110 mA total...)
[1]: https://www.96boards.org/documentation/consumer/dragonboard/dragonboard410c/hardware-docs/hardware-user-manual.md.html#power-supplies
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes:
828dd5d66f0f ("arm64: dts: apq8016-sbc: make 1.8v available on LS expansion")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-2-54d4960a05fc@gerhold.net
Stephan Gerhold [Wed, 17 May 2023 18:48:40 +0000 (20:48 +0200)]
arm64: dts: qcom: apq8016-sbc: Fix regulator constraints
For some reason DB410c has completely bogus regulator constraints that
actually just correspond to the programmable voltages which are already
provided by the regulator driver. Some of them are not just outside the
recommended operating conditions of the APQ8016E SoC but even exceed
the absolute maximum ratings, potentially risking permanent device
damage.
In practice it's not quite as dangerous thanks to the RPM firmware:
It turns out that it has its own voltage constraints and silently
clamps all regulator requests. For example, requesting 3.3V for L5
(allowed by the current regulator constraints!) still results in 1.8V
being programmed in the actual regulator hardware.
Experimentation with various voltages shows that the internal RPM
voltage constraints roughly correspond to the safe "specified range"
in the PM8916 Device Specification (rather than the "programmable
range" used inside apq8016-sbc.dtsi right now).
Combine those together with some fixed voltages used in the old
msm-3.10 device tree from Qualcomm to give DB410c some actually valid
voltage constraints.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes:
4c7d53d16d77 ("arm64: dts: apq8016-sbc: add regulators support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-1-54d4960a05fc@gerhold.net
Jianhua Lu [Wed, 17 May 2023 13:33:40 +0000 (21:33 +0800)]
arm64: dts: qcom: sm8250-xiaomi-elish: remove redundant empty line
Remove a redundant empty line introduced by
commit
51c4c2bd6f31 ("arm64: dts: qcom: sm8250-xiaomi-elish-boe: Add mdss and dsi panel")
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517133340.21111-1-lujianhua000@gmail.com
Kathiravan T [Wed, 17 May 2023 07:28:06 +0000 (12:58 +0530)]
arm64: dts: qcom: ipq9574: add few device nodes
Add QUP(SPI / I2C) peripheral, PRNG, WDOG and the remaining UART nodes.
While at it, enable the SPI NOR in RDP433 board.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517072806.13170-1-quic_kathirav@quicinc.com
Krzysztof Kozlowski [Tue, 16 May 2023 15:45:39 +0000 (17:45 +0200)]
arm64: dts: qcom: sm8550-qrd: add display and panel
Enable Display Subsystem with Visionox VTDR6130 Panel (same as on
MTP8550).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 16 May 2023 15:45:38 +0000 (17:45 +0200)]
arm64: dts: qcom: sm8550-mtp: drop redundant MDP status
MDP in sm8550.dtsi is not disabled (although its parent MDSS is), so
board DTS does not have to enable it.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 16 May 2023 15:45:37 +0000 (17:45 +0200)]
arm64: dts: qcom: sm8550: enable DISPCC by default
Enable the Display Clock Controller by default in SoC DTSI so unused
clocks can be turned off. It does not require any external resources,
so as core SoC component should be always available to boards.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516154539.238655-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 16 May 2023 15:02:02 +0000 (17:02 +0200)]
arm64: dts: qcom: sm8550-qrd: add flash LEDs
Enable PM8550 PMIC flash LED controller and add two flash LEDs using
four current outputs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150202.188655-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 16 May 2023 15:02:01 +0000 (17:02 +0200)]
arm64: dts: qcom: pm8550: add flash LED controller
Add node for PM8550 PMIC flash LED controller.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516150202.188655-2-krzysztof.kozlowski@linaro.org
Luca Weiss [Tue, 16 May 2023 06:56:14 +0000 (08:56 +0200)]
arm64: dts: qcom: sm6350: Move wifi node to correct place
Somehow wifi was placed further up in the file than where it should be.
Move it down so the nodes are sorted by reg again.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516-sm6350-order-v1-1-5c3b7c4cd761@fairphone.com
Konrad Dybcio [Tue, 16 May 2023 00:53:06 +0000 (02:53 +0200)]
arm64: dts: qcom: sm8450: Add missing RPMhPD OPP levels
We need more granularity for things like the GPU. Add the missing levels.
This unfortunately requires some re-indexing, resulting in an ugly diff.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516005306.952821-1-konrad.dybcio@linaro.org
Nikita Travkin [Mon, 15 May 2023 09:37:44 +0000 (14:37 +0500)]
arm64: dts: qcom: Add Acer Aspire 1
Acer Aspire 1 is a WoA laptop based on Snapdragon 7c gen1 platform.
The laptop design is similar to trogdor in the choice of primary
components but the specifics on usage of those differ slightly.
Add the devicetree for the laptop with support for most of the
hardware present.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-5-nikita@trvn.ru
Nikita Travkin [Mon, 15 May 2023 09:37:43 +0000 (14:37 +0500)]
dt-bindings: arm: qcom: Add Acer Aspire 1
Acer Aspire 1 is a laptop based on sc7180. Document it's compatible.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-4-nikita@trvn.ru
Nikita Travkin [Mon, 15 May 2023 09:37:42 +0000 (14:37 +0500)]
arm64: dts: qcom: sc7180: Drop redundant disable in mdp
mdss is useless without a display controller which makes explicitly
enabling mdp redundant. Have it enabled by default to drop the extra
node for all users.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-3-nikita@trvn.ru
Nikita Travkin [Mon, 15 May 2023 09:37:41 +0000 (14:37 +0500)]
arm64: dts: qcom: sc7180: Don't enable lpass clocks by default
lpass clocks are usually blocked from HLOS by the firmware and
instead are managed by the ADSP. Mark them as reserved and explicitly
enable in the CrOS boards that have special, cooperative firmware.
The IDP board gets lpass clocks disabled as it doesn't make use of sound
anyway and might use Qualcomm firmware that blocks those clocks. [1]
[1] https://lore.kernel.org/all/ZBJhmDd3zK%2FAiwBD@google.com/
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515093744.289045-2-nikita@trvn.ru
Krzysztof Kozlowski [Fri, 12 May 2023 16:04:52 +0000 (18:04 +0200)]
arm64: dts: qcom: sm8550-mtp: add WCD9385 audio-codec
Add Qualcomm Aqstic WCD9385 audio codec on two Soundwire interfaces: RX
and TX.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512160452.206585-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Fri, 12 May 2023 16:04:51 +0000 (18:04 +0200)]
arm64: dts: qcom: sm8550-qrd: add WCD9385 audio-codec
Add Qualcomm Aqstic WCD9385 audio codec on two Soundwire interfaces: RX
and TX.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512160452.206585-1-krzysztof.kozlowski@linaro.org
Yang Xiwen [Fri, 5 May 2023 16:32:51 +0000 (00:32 +0800)]
arm64: dts: qcom: msm8916-ufi: make UDC dual mode
It's possible to use this device with a (non-standard) hub to get USB
working in host mode, but dr_mode="peripheral" prevents the UDC to
do so.
Remove dr_mode="peripheral" and add usb-role-switch so that it defaults
to otg mode and can be switched to host mode in userspace.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/TYZPR04MB632102315884225B7343533B96729@TYZPR04MB6321.apcprd04.prod.outlook.com
Luca Weiss [Sat, 22 Apr 2023 11:39:16 +0000 (13:39 +0200)]
arm64: dts: qcom: msm8953: Add BLSP DMAs for I2C
MSM8953 has two DMA controllers for the various I2C, SPI and UART
busses. Add the nodes and configure all the I2C nodes so that the driver
can use the DMA.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230422-msm8953-blsp-dma-v1-1-0024801bb587@z3ntu.xyz
Luca Weiss [Fri, 21 Apr 2023 21:56:22 +0000 (23:56 +0200)]
arm64: dts: qcom: pm8953: add GPIOs
Add a node for the GPIOs found on the pm8953.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230421-pm8953-gpio-v1-3-3d33e2de47e3@z3ntu.xyz
Krzysztof Kozlowski [Thu, 20 Apr 2023 06:36:10 +0000 (08:36 +0200)]
arm64: dts: qcom: sm6125: add unit address to soc node
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 20 Apr 2023 06:36:09 +0000 (08:36 +0200)]
arm64: dts: qcom: sdm630: add unit address to soc node
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 20 Apr 2023 06:36:08 +0000 (08:36 +0200)]
arm64: dts: qcom: msm8998: add unit address to soc node
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 20 Apr 2023 06:36:07 +0000 (08:36 +0200)]
arm64: dts: qcom: msm8996: add unit address to soc node
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 20 Apr 2023 06:36:06 +0000 (08:36 +0200)]
arm64: dts: qcom: msm8994: add unit address to soc node
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 20 Apr 2023 06:36:05 +0000 (08:36 +0200)]
arm64: dts: qcom: ipq8074: add unit address to soc node
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Thu, 20 Apr 2023 06:36:04 +0000 (08:36 +0200)]
arm64: dts: qcom: ipq6018: add unit address to soc node
"soc" node is supposed to have unit address:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420063610.11068-1-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:56 +0000 (23:18 +0200)]
arm64: dts: qcom: sdm845-polaris: add missing touchscreen child node reg
Add missing reg property to touchscreen child node to fix dtbs W=1 warnings:
Warning (unit_address_vs_reg): /soc@0/geniqup@ac0000/i2c@a98000/touchscreen@20/rmi4-f12@12: node has a unit name, but no reg or ranges property
Fixes:
be497abe19bf ("arm64: dts: qcom: Add support for Xiaomi Mi Mix2s")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Molly Sophia <mollysophia379@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-18-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:55 +0000 (23:18 +0200)]
arm64: dts: qcom: sm8550: correct pinctrl unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/pinctrl@f000000: simple-bus unit address format error, expected "f100000"
Fixes:
ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-17-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:54 +0000 (23:18 +0200)]
arm64: dts: qcom: sm8550: correct crypto unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/crypto@1de0000: simple-bus unit address format error, expected "1dfa000"
Fixes:
433477c3bf0b ("arm64: dts: qcom: sm8550: add QCrypto nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-16-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:53 +0000 (23:18 +0200)]
arm64: dts: qcom: sm8350: correct USB phy unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/phy@88e9000: simple-bus unit address format error, expected "88e8000"
Fixes:
2458a305e80e ("arm64: dts: qcom: sm8350: switch to combo usb3/dp phy")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-15-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:52 +0000 (23:18 +0200)]
arm64: dts: qcom: sm8350: correct PCI phy unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/phy@1c0f000: simple-bus unit address format error, expected "1c0e000"
Fixes:
6daee40678a0 ("arm64: dts: qcom: sm8350: add PCIe devices")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-14-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:51 +0000 (23:18 +0200)]
arm64: dts: qcom: sm8350: correct DMA controller unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/dma-controller@900000: simple-bus unit address format error, expected "9800000"
Fixes:
bc08fbf49bc8 ("arm64: dts: qcom: sm8350: Define GPI DMA engines")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-13-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:50 +0000 (23:18 +0200)]
arm64: dts: qcom: sm6115: correct thermal-sensor unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/thermal-sensor@4410000: simple-bus unit address format error, expected "4411000"
Fixes:
7b74cba6b13f ("arm64: dts: qcom: sm6115: Add TSENS node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-12-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:49 +0000 (23:18 +0200)]
arm64: dts: qcom: sdm845: correct camss unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/camss@a00000: simple-bus unit address format error, expected "acb3000"
Fixes:
d48a6698a6b7 ("arm64: dts: qcom: sdm845: Add CAMSS ISP node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-11-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:48 +0000 (23:18 +0200)]
arm64: dts: qcom: sdm630: correct camss unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/camss@ca00000: simple-bus unit address format error, expected "ca00020"
Fixes:
f3d5d3cc6971 ("arm64: dts: qcom: sdm630: Configure the camera subsystem")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-10-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:47 +0000 (23:18 +0200)]
arm64: dts: qcom: msm8996: correct camss unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/camss@a00000: simple-bus unit address format error, expected "a34000"
Fixes:
e0531312e78f ("arm64: dts: qcom: msm8996: Add CAMSS support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:46 +0000 (23:18 +0200)]
arm64: dts: qcom: msm8994: correct SPMI unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/spmi@
fc4c0000: simple-bus unit address format error, expected "
fc4cf000"
Fixes:
b0ad598f8ec0 ("arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:45 +0000 (23:18 +0200)]
arm64: dts: qcom: msm8976: correct MMC unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/mmc@7824000: simple-bus unit address format error, expected "7824900"
Warning (simple_bus_reg): /soc@0/mmc@7864000: simple-bus unit address format error, expected "7864900"
Warning (simple_bus_reg): /soc@0/mmc@7a24000: simple-bus unit address format error, expected "7a24900"
Fixes:
0484d3ce0902 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:44 +0000 (23:18 +0200)]
arm64: dts: qcom: msm8953: correct WCNSS unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/remoteproc@a21b000: simple-bus unit address format error, expected "a204000"
Fixes:
b12428640ebe ("arm64: dts: MSM8953: Add wcnss nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:43 +0000 (23:18 +0200)]
arm64: dts: qcom: msm8953: correct IOMMU unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/iommu@1e00000: simple-bus unit address format error, expected "1e20000"
Fixes:
c0b9575a3606 ("arm64: dts: qcom: msm8953: add APPS IOMMU")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:42 +0000 (23:18 +0200)]
arm64: dts: qcom: msm8916: correct WCNSS unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/remoteproc@a21b000: simple-bus unit address format error, expected "a204000"
Fixes:
88106096cbf8 ("ARM: dts: msm8916: Add and enable wcnss node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:41 +0000 (23:18 +0200)]
arm64: dts: qcom: msm8916: correct MMC unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/mmc@7824000: simple-bus unit address format error, expected "7824900"
Warning (simple_bus_reg): /soc@0/mmc@7864000: simple-bus unit address format error, expected "7864900"
Fixes:
c4da5a561627 ("arm64: dts: qcom: Add msm8916 sdhci configuration nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:40 +0000 (23:18 +0200)]
arm64: dts: qcom: msm8916: correct camss unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/camss@1b00000: simple-bus unit address format error, expected "1b0ac00"
Fixes:
58f479f90a7c ("arm64: dts: qcom: msm8916: Add CAMSS support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 19 Apr 2023 21:18:39 +0000 (23:18 +0200)]
arm64: dts: qcom: ipq6018: correct qrng unit address
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/qrng@e1000: simple-bus unit address format error, expected "e3000"
Fixes:
5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-1-krzysztof.kozlowski@linaro.org
Arnaud Vrac [Mon, 17 Apr 2023 16:49:46 +0000 (18:49 +0200)]
arm64: dts: qcom: msm8998: add blsp spi nodes
Add pinctrl and qup nodes in msm8998 device tree to support spi.
Values were ported from downstream msm-4.4 kernel.
Signed-off-by: Arnaud Vrac <avrac@freebox.fr>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230417-msm8998-spi-v2-1-b314c6d9ea31@freebox.fr
Konrad Dybcio [Thu, 13 Apr 2023 00:37:36 +0000 (02:37 +0200)]
arm64: dts: qcom: msm8996-tone: Enable LPG LEDs
Enable the notification LED(s) wired up to the PMI8994(6) LPG.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230413-tone_led-v1-1-bc3c73393bfa@linaro.org
Konrad Dybcio [Wed, 12 Apr 2023 20:24:51 +0000 (22:24 +0200)]
arm64: dts: qcom: sm8250-edo: Enable Venus
Enable Venus on Edo phones. The firmware is signed, as per usual.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412-edo_venus-v1-1-bcfc82e0efc3@linaro.org
Konrad Dybcio [Tue, 11 Apr 2023 18:14:44 +0000 (20:14 +0200)]
arm64: dts: qcom: sm8150-kumano: Enable SDHCI2
Set up and enable SDHCI2 to enable the microSD slot on Kumano
devices.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-4-0ca7fa521b86@linaro.org
Konrad Dybcio [Tue, 11 Apr 2023 18:14:43 +0000 (20:14 +0200)]
arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators
Sony - as per usual - used a whole bunch of GPIO-gated fixed
voltage regulators for camera sensors on Kumano. Describe them
and the corresponding pins.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-3-0ca7fa521b86@linaro.org
Konrad Dybcio [Tue, 11 Apr 2023 18:14:42 +0000 (20:14 +0200)]
arm64: dts: qcom: sm8150-kumano: Add GPIO line names for TLMM
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the common DTSI to better document the hardware.
The pin assignment for TLMM is identical on both devices. Great job!
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-2-0ca7fa521b86@linaro.org
Konrad Dybcio [Tue, 11 Apr 2023 18:14:41 +0000 (20:14 +0200)]
arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the Griffin and Bahamut device trees to better document
the hardware.
They are the same on both devices! Very nice!
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-1-0ca7fa521b86@linaro.org
Dmitry Baryshkov [Sun, 9 Apr 2023 18:21:45 +0000 (21:21 +0300)]
arm64: dts: qcom: pm8998: don't use GIC_SPI for SPMI interrupts
Unlike typical GIC interrupts, first cell for SPMI interrupts is the
USID rather than GIC_SPI/GIC_PPI/GIC_LPI qualifier. Fix the resin
interrupt to use USID value 0x0 rather than GIC_SPI define.
Fixes:
f86ae6f23a9e ("arm64: dts: qcom: sagit: add initial device tree for sagit")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230409182145.122895-1-dmitry.baryshkov@linaro.org
Jagadeesh Kona [Wed, 24 May 2023 14:52:03 +0000 (20:22 +0530)]
arm64: dts: qcom: sm8550: Add video clock controller
Add device node for video clock controller on Qualcomm SM8550 platform.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524145203.13153-5-quic_jkona@quicinc.com
Taniya Das [Wed, 24 May 2023 14:06:56 +0000 (19:36 +0530)]
arm64: dts: qcom: sm8450: Add video clock controller
Add device node for video clock controller on Qualcomm SM8450 platform.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524140656.7076-4-quic_tdas@quicinc.com
Bjorn Andersson [Thu, 25 May 2023 04:50:07 +0000 (21:50 -0700)]
Merge branch '
20230524140656.7076-2-quic_tdas@quicinc.com' into HEAD
Merge the SM8450 Video Clock Controller DeviceTree binding topic branch
in order to get access to the clock constants defined by the binding.
projects / platform / kernel / linux-rpi.git / log