Staging: batman-adv: convert vis_interval into define

vis_interval does not neccesarily needs to be a variable, as there is
no way to change it anyway (and probably no need to). We can therefore
remove yet another global variable.

Thanks Marek for pointing this out.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Add information about batman-adv sysfs entries

Add documents about new sysfs entries in
 * /sys/class/net/<iface>/batman-adv/mesh_iface
 * /sys/class/net/<mesh_iface>/mesh/vis_mode

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: Adding netfilter-bridge hooks

batman-adv is receiving and sending the packets of its own ether type
on a very early/low level. Therefore we need to add explicit hooks to
give netfilter/ebtables a chance to filter them.

Reported-by: Antonio Quartulli <ordex@ritirata.org>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: batman-adv: remove redundant struct declaration

The hardif_attr and the bat_attr struct share the same attributes,
hence it is not necessary to specify 2 different structs.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: MSM: remove duplicated #include

Remove duplicated #include('s) in
  drivers/staging/msm/mddihost.h
  drivers/staging/msm/msm_fb_def.h
  drivers/staging/msm/staging-devices.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: XGI: remove duplicated #include

Remove duplicated #include('s) in
  drivers/staging/xgifb/XGI_main_26.c
  drivers/staging/xgifb/vb_init.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: pohmelfs: fix compile warning

A really trivial patch to solve a warning when compiling staging/pohmelfs

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155: remove DT_3155_* errno defines

Remove the DT_3155_{SUCCESS/FAILURE} errno defines and use the
kernel provided ones.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155: fix different address spaces noise in dt3155_drv.c

This fixes the different address spaces noise when copying data to/from
user space to kernel space.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155v4l: correcting a pointer mismatch bug and cleanups

The third argument of dma_alloc_coherent() is of type dma_addr_t and is defined
as u64 for x86_64, while the member 'device_base' of struct dma_coherent_mem is
defined as u32.

While at it, clean up the code. Now if dev->dma_mem != NULL all the fields/members
are already properly initialized.

Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192u: fix checkpatch.pl issues to line 514

Fixed most problems pointed out by checkpatch.pl in file r8192U_core.c
up to line 500

Signed-off-by: Mike Gilks <mike.kernel@gilksonline.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dt3155: dt3155_isr.c: Fix checkpatch.pl issues.

Fix resolves checkpatch.pl issues.

Signed-off-by: Nanakos Chrysostomos <nanakos@wired-net.gr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl81xx: Fix build problems when CONFIG_CRYPTO=n

Select CONFIG_CRYPTO for all rtl81xx wireless drivers

... to avoid build problems like:

ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8187se/r8187se.ko] undefined!
ERROR: "crypto_alloc_base" [drivers/staging/rtl8187se/r8187se.ko] undefined!
ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "crypto_alloc_base" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "crypto_alloc_base" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined!
ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8192e/r8192e_pci.ko] undefined!
ERROR: "crypto_alloc_base" [drivers/staging/rtl8192e/r8192e_pci.ko] undefined!

when drivers are built as modules but CONFIG_CRYPTO=n.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: crystalhd: removed kfree(NULL) checks

Removed kfree(NULL checks) that were not necessary

Signed-off-by: Scott Kidder <scott.kidder11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: pmem.c: Fix checkpatch.pl issues.

This patch resolves checkpatch.pl issues in the pmem.c file.

Signed-off-by: Nanakos Chrysostomos <nanakos@wired-net.gr>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cx25821: added KERN_ facility levels

Fixed issues found by checkpatch.pl including adding KERN_
facility levels to printk() calls and C99 comments.

Signed-off-by: Scott Kidder <scott.kidder11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: Removed one unnecessary space

Nothing special really, just a small fix.

Signed-off-by: Matti Lammi <matti.lammi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: fix strcpy() overflow

wrq->name is only 16 characters long but "IEEE 802.11-MIMO" is 16
characters + a NULL character, so it's too long.  This patch changes it
to "IEEE 802.11abgn".

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: TODO: Don't bother, for documentation purposes only

On Mon, 2010-06-07 at 12:02 -0700, Luis R. Rodriguez wrote:
> this driver is unmaintained and its only purpose is as a
> source of documentation for developers working on ar9170 and carl9170.
> Once carl9170 gets 11n support and merged upstream then this driver
> can be removed.

Then the TODO file should be updated.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: fix style issues in zdusb.c

This is a patch to zdusb.c that fixes whitespace,
C99 comment, and other style issues found by the
checkpatch.pl tool

Signed-off-by: Scott Kidder <scott.kidder11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: silence a sparse warning

This doesn't change the behavior.  It just silences a sparse warning.

drivers/staging/wlan-ng/hfa384x_usb.c:2810:62: warning: dubious: !x | !y

The point of the bitwise OR is so that a logical OR could short circuit
the second call to test_and_set_bit().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge branch 'staging-next' into work

Staging: winbond: fix build errors

Some errors crept in due to a previous patch that I missed.

This fixes them up so the driver continues to build, sorry about that.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Switch from wext to cfg80211

Switch driver over from wext to cfg80211 interface.

Some Notes:

- This patch moves the driver wholesale from wext to cfg80211. Wext
support is still provided through the cfg80211 provided wext
compatability layer.

- Currently only infrastructure mode is implemented. Ad hoc mode is not
yet implemented, but can be added.

- It does not support connecting to a specified bssid, instead roaming
is handled by the card itself. This matches the behaviour of the
existing driver.

- It has been tested using NetworkManager (via wpa_supplicant)
configured to use the wext compatability layer, and then again with the
native nl80211 layer.

Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cxt1e1: remove code guarded by GENERIC_HDLC_VERSION

Current linux kernel has GENERIC_HDLC_VERSION equal to 4, no need to
have dead code in-kernel which was there for ancient kernel versions.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: remove all code dependent on LINUX_VERSION_CODE

Remove all code which is dead for in-kernel driver due to being
ifdefed by LINUX_VERSION_CODE.

While at it, also remove surrounding code which is commented out,
or '#if 1' nops.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: cxt1e1: remove all code dependent on LINUX_VERSION_CODE

Remove all code which is dead for in-kernel driver due to being
ifdefed by LINUX_VERSION_CODE.

While at it, also remove surrounding code which is commented out,
or '#if 1' nops.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: Fix procfs code for interfaces not named wlan0

The current code creates directories in procfs named after interfaces,
but doesn't handle renaming.  This can result in name collisions and
consequent WARNINGs.  It also means that the interface name cannot
reliably be used to remove the directory - in fact the current code
doesn't even try, and always uses "wlan0"!

Since the name of a proc_dir_entry is embedded in it, use that when
removing it.

Add a netdev notifier to catch interface renaming, and remove and
re-add the directory at this point.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

Staging: rtl8192su: Clean up in case of an error in module initialisation

Currently various resources may be leaked in case of an error.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: dream: camera: Use memdup_user

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: bridges: Add missing unlocks

Add a spin_unlock and mutex_unlock missing on the error path.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E1;
@@

* spin_lock(E1,...);
  <+... when != E1
  if (...) {
    ... when != E1
*   return ...;
  }
  ...+>
* spin_unlock(E1,...);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vme: devices: vme_user.c: Fix checkpatch.pl issues.

Fix resolves checkpatch.pl issues for vme_user.c file.

Signed-off-by: Nanakos Chrysostomos <nanakos@wired-net.gr>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: adis16255: missing spacess in log messages added

Signed-off-by: Matthias Brugger <mensch0815@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: adis16209/220/240/350: tuning spi delay to make hardware more stable

Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: adis16400: fix some minor issues and clean-up

1. move adis16400_spi_read_burst() to adis16400_ring.c since it is only
   called there
2. add the lost calling to adis16400_self_test()
3. codes cleanup

Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: adis16300: fix some minor issues and clean-up

1. add delay between spi transfers
2. move burst read to ring function
3. clean-up

Signed-off-by: Barry Song <21cnbao@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: add file pointer to sysfs callbacks

The sysfs attribute call backs take a file pointer these days.  This was
added in 2c3c8bea6088 "sysfs: add struct file* to bin_attr callbacks"

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: Add mailing list to the TODO file.

As suggested by Charles Clement

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: pull in slab.h for kmalloc funcs

These drivers use kzalloc() but don't include slab.h.  They currently
build though because the spi.h header will pull in slab.h for us.  But
rather than rely on that behavior forever, include slab.h explicitly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: kill off spurious semicolons

A bunch of IIO files contain spurious semicolons after function
definitions and case statements and if statements.  Guess people
really like this thing, but kill them anyways so they'll stop
spreading via copy & paste with new drivers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: iio: standardize kconfig/makefile spacing/style

Standardize the spacing/style across the IIO build files:
- comment block in Kconfigs
- newlines at ends of files
- trailing lines at ends of files
- indent with one tab, not spaces or mixed

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: zram: Rename ramzswap to zram in documentation

Related changes:
 - Included example to show usage as generic
(non-swap) disk with ext4 filesystem.
 - Renamed rzscontrol to zramconfig to match
with new device naming.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: zram: Rename ramzswap to zram in code

Automated renames in code:
 - rzs* -> zram*
 - RZS* -> ZRAM*
 - ramzswap* -> zram*

Manual changes:
 - Edited comments/messages mentioning "swap"

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Rename ramzswap files to zram

Related changes:
 - Modify revelant Kconfig and Makefile accordingly.
 - Change include filenames in code.
 - Remove dependency on CONFIG_SWAP in Kconfig as zram usage
is no longer limited to swap disks.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: ramzswap: Support generic I/O requests

Currently, ramzwap devices (/dev/ramzswapX) can only
be used as swap disks since it was hard-coded to consider
only the first request in bio vector.

Now, we iterate over all the segments in an incoming
bio which allows us to handle all kinds of I/O requests.

ramzswap devices can still handle PAGE_SIZE aligned and
multiple of PAGE_SIZE sized I/O requests only. To ensure
that we get always get such requests only, we set following
request_queue attributes to PAGE_SIZE:
 - physical_block_size
 - logical_block_size
 - io_min
 - io_opt

Note: physical and logical block sizes were already set
equal to PAGE_SIZE and that seems to be sufficient to get
PAGE_SIZE aligned I/O.

Since we are no longer limited to handling swap requests
only, the next few patches rename ramzswap to zram. So,
the devices will then be called /dev/zram{0, 1, 2, ...}

Usage/Examples:
 1) Use as /tmp storage
 - mkfs.ext4 /dev/zram0
 - mount /dev/zram0 /tmp

 2) Use as swap:
 - mkswap /dev/zram0
 - swapon /dev/zram0 -p 10 # give highest priority to zram0

Performance:

 - I/O benchamark done with 'dd' command. Details can be
found here:
http://code.google.com/p/compcache/wiki/zramperf
Summary:
 - Maximum read speed (approx):
   - ram disk: 1200 MB/sec
   - zram disk: 600 MB/sec
 - Maximum write speed (approx):
   - ram disk: 500 MB/sec
   - zram disk: 160 MB/sec

Issues:

 - Double caching: We can potentially waste memory by having
two copies of a page -- one in page cache (uncompress) and
second in the device memory (compressed). However, during
reclaim, clean page cache pages are quickly freed, so this
does not seem to be a big problem.

 - Stale data: Not all filesystems support issuing 'discard'
requests to underlying block devices. So, if such filesystems
are used over zram devices, we can accumulate lot of stale
data in memory. Even for filesystems to do support discard
(example, ext4), we need to see how effective it is.

 - Scalability: There is only one (per-device) de/compression
buffer stats. This can lead to significant contention, especially
when used for generic (non-swap) purposes.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: ti-st: fix protocol counting

Older mechanism of counting the number of protocols
registered with ST was slow, in-efficient.
It used to check the protocol data for NULL for each
registration/unregistration.

With this change, counting protocols in maintained by
a single counter protos_registered.

Counting protocols is not just for debug purposes

Signed-off-by: Naveen Jain <naveen_jain@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: ti-st: add version info to sysfs

Add version information to be available under the sysfs group
for kim.

Signed-off-by: Naveen Jain <naveen_jain@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: ti-st: cleanup sysfs code

Remove the older way of communicating with user-space
daemon UIM.
The older way involved creating of a new kobj and pid
sysfs file under it, and sending signal using that pid.

Now we communicate via rfkill to user-space UIM.

Background: UIM is the user-space daemon which upon
notification from ldisc driver, opens the tty, sets
default baud and then installs (tiocsetd) the ldisc.

Signed-off-by: Naveen Jain <naveen_jain@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Update TI-ST's TODO

Update the TODO of TI-ST to make sure it reflects current list
of activities that need to be done.
Also point it out to the user-space app code relevant to it.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: easycap: add easycap driver

This adds the easycap USB video adapter driver to
the staging directory.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Merge git://git.infradead.org/users/dwmw2/spectra-2.6 into work

Staging: vt6655: struct pci_driver cleanup

Rename driver struct and callbacks to vt6655_* instead of device_* and add
__devinit/__devexit directives.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt665*: fix typos concerning "management"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: fix coding style issues in 80211mgr.c

This is a patch to the 80211mgr.c file that fixes up warnings
found by the checkpatch.pl tool

Signed-off-by: Timofey Trofimov <tumoxep@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: fix up built-in compilation together with rt2870

Fix this build error:

  drivers/staging/vt6656/built-in.o: In function `rotr1':
  (.text+0x1a878): multiple definition of `rotr1'
  drivers/staging/rt2870/built-in.o:(.text+0x106c2): first defined here
  drivers/staging/vt6656/built-in.o: In function `tkip_sbox':
  (.text+0x1a848): multiple definition of `tkip_sbox'
  drivers/staging/rt2870/built-in.o:(.text+0x10697): first defined here
  drivers/staging/vt6656/built-in.o: In function `xor_32':
  (.text+0x1ec24): multiple definition of `xor_32'
  drivers/staging/rt2870/built-in.o:(.text+0x111c4): first defined here
  drivers/staging/vt6656/built-in.o: In function `xor_128':
  (.text+0x1ec00): multiple definition of `xor_128'
  drivers/staging/rt2870/built-in.o:(.text+0x111dd): first defined here

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: code cleanup, resolved checkpatch findings in headers

Resolved whitespace-related checkpatch findings in .h files

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6656: code cleanup, fixed 'for' statements

Resolved checkpatch findings, but some long lines warnings.
ERROR: space required before the open parenthesis '('
ERROR: spaces required around that

Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: fix up U32 conversion

Commit 902d2411298a6e0b8a473a0163aa4bf6d5c8a073 converted U32 to u32
which you would think would be just fine.  Unfortunatly, it seems that
VIA only builds their code on a 32bit processor (which makes sense if
you think about it), but this doesn't work on x86-64.  So fix up the few
places where this really wanted to be an unsigned long width.

Cc: Charles Clément <caratorn@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>,
Cc: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: include linux/ headers instead of asm/

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove PDWORD typedef

Use unsigned long * instead.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove PWORD typedef

Use unsigned short * instead.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove PBYTE typedef

Use unsigned char * instead.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove custom ULONGLONG typedef

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove custom ULONG typedef

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove custom UINT typedef

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove custom USHORT typedef

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove custom UCHAR typedef

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove custom LONG typedef

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove custom INT typedef

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: removed custom SHORT typedef

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: removed custom CHAR typedef

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove U32 custom macro

Remove custom macro for unsigned 32-bit integers, replace by u32.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove U16 custom macro

Remove custom macro for unsigned 16-bit integers.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove U8 custom macro

Remove custom macro for unsigned 8-bit integers.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove I8 custom macro

Remove custom macro for signed 8-bit integers.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove unused OUT definition

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove double definition of Calcu_LinkQual

Calcu_LinkQual is already defined a couple lines earlier.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: remove unused argument in ChannelValid function

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: use compare_ether_addr instead of custom macro

Replace custom macro IS_ETH_ADDRESS_EQUAL by compare_ether_addr from
<linux/etherdevice.h>.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: use is_zero_ether_addr instead of custom macro

Replace custom macro IS_NULL_ADDRESS by is_zero_ether_addr from
<linux/etherdevice.h>.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: use is_broadcast_ether_addr instead of custom macro

Replace custom macro IS_BROADCAST_ADDRESS by is_broadcast_ether_addr
from <linux/etherdevice.h>.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: use is_multicast_ether_addr instead of custom macro

Replace custom macro IS_MULTICAST_ADDRESS by is_multicast_ether_addr
from <linux/etherdevice.h>.
Remove linux/if_ether.h include as it is included in
linux/etherdevice.h already.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: vt6655: use ETH_ZLEN macro instead of custom one

Replace custom minimum packet lenght definition MIN_PACKET_LEN by
ETH_ZLEN from <linux/if_ether.h>.

Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: winbond: fix some checkpatch.pl issues in phy_calibration.c

This is a patch to the phy_calibration.c that fixes up almost all
warnings and errors (except 80 characters limit and lack of tabs errors)
found by the checkpatch.pl tool

Signed-off-by: Timofey Trofimov <tumoxep@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: winbond: Fix for brace style, length and whitespace in mac_structures.h

This patch fixes line length, brace style and whitespace issues in the
mac_structures.h file found by the checkpatch.pl tool

Signed-off-by: Adam Latham <adam.latham@unisontorbay.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: winbond: Fix C99 Comment issues in mac_structures.h

This patch fixes the use of //C99 comments in the mac_structures.h found by
the checkpatch.pl tool

Signed-off-by: Adam Latham <adam.latham@unisontorbay.org.uk>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Storage class should be before const qualifier

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: drivers: fix coding style issues in pcl812.c

This is a patch to the pcl812.c file that fixes up the following
issues:

ERROR: code indent should use tabs where possible    x 27
WARNING: line over 80 characters    x 37
WARNING: please, no space before tabs    x 13
WARNING: braces {} are not necessary for single statement blocks   x  2
WARNING: printk() should include KERN_ facility level    x 22
WARNING: braces {} are not necessary for any arm of this statement x  5

Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: Small format/style tidyups

I fixed indentation in one place and two long lines, a space and a brace
found by checkpatch.pl and fixed some long lines and whitespace around an =.

Signed-off-by: Lars Lindley <lindley@coyote.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Comedi: drivers: Remove comment copied from skel.c

The dmm32at.c and comedi_bond.c comedi driver files contain an
instructional comment block copied over from skel.c about how to format
a driver comment block.  This comment was modified in skel.c by a
previous patch in this series to stop Comedi's 'dump_doc' script
treating it as an actual driver comment block.  There isn't any need to
repeat this comment block in the other source files, so rather than
modify it, this patch just removes it from those files.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: drivers: skel: Add whitespace to example comment block

The Comedi team have a script 'dump_doc' to extract text from the driver
comment block (starting with line 'Driver:') in (most of) the comedi
driver source files.  This was recently updated to allow and strip off a
" * " prefix at the start of each line (well actually, it uses the perl
substitution 's/^ ?\* ?//').

The skel.c file contains an instructional comment block about how to
format this driver comment block, but the updated 'dump_doc' script
mistakenly treats this as a valid driver comment block.  This patch adds
some extra whitespace to stop the instructional comment block being
treated as a valid driver comment block by Comedi's 'dump_doc' script.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: drivers: das08: Add whitespace to driver comment block

Previous whitespace changes to das08.c removed some whitespace from a
"driver comment block" that the Comedi team would like to keep.  "Header
continuation lines" in this comment block should be indented with
whitespace.  (This is after the " * " at the start of each line.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: drivers: fix coding style issues in quatech_daqp_cs.c

This is a patch to the quatech_daqp_cs.c file that fixes up the following
issues:

ERROR: code indent should use tabs where possible    x  1
WARNING: line over 80 characters    x  1
WARNING: braces {} are not necessary for single statement blocks   x 10
WARNING: printk() should include KERN_ facility level    x  6

Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: drivers: fix coding style issues in pcmda12.c

This is a patch to the pcmda12.c file that fixes up five printk() warning issues

Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: drivers: fix coding style issues in pcl816.c

This is a patch to the pcl816.c file that fixes up the following
issues:

ERROR: code indent should use tabs where possible    x  2
WARNING: line over 80 characters    x 34
WARNING: please, no space before tabs    x  1
WARNING: braces {} are not necessary for single statement blocks   x  6
WARNING: printk() should include KERN_ facility level    x 15
WARNING: braces {} are not necessary for any arm of this statement x  1

Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: drivers: Fix coding style issues in pcl711.c

This is a patch to the pcl711.c file that fixes up printk()
warning issues.

Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: drivers: fix coding style issues in me4000.c

This is a patch to the me4000.c file that fixes up the following
issues:

ERROR: space required after that close brace '}'     x 13
ERROR: spaces required around that ':' (ctx:VxV)     x  3
WARNING: line over 80 characters                     x 96
WARNING: braces {} are not necessary for any arm of this statement x  2

Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Remove typedefs

Remove all remaining typedefs from comedi drivers

Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Remove COMEDI_PCI_INITCLEANUP macro

Move the PCI devinit/devexit routines to the respective C source files
instead of calling COMEDI_PCI_INITCLEANUP

Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: Remove COMEDI_INITCLEANUP macro

Move the init/exit routines to the respective C source files
instead of calling COMEDI_INITCLEANUP

Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>