dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending

Cyclic channels must too call issue_pending in order to start a transfer.
Start the transfer in issue_pending regardless of the type of channel.
This wrongly worked before, because in the past the transfer was started
at tx_submit level when only a desc in the transfer list.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-3-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: at_xdmac: Don't start transactions at tx_submit level

tx_submit is supposed to push the current transaction descriptor to a
pending queue, waiting for issue_pending() to be called. issue_pending()
must start the transfer, not tx_submit(), thus remove
at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that
assume that tx_submit() starts the transfer must be updated and call
dma_async_issue_pending() if they miss to call it (one example is
atmel_serial).

As the at_xdmac_start_xfer() is now called only from
at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the
at_xdmac_chan_is_enabled() check is no longer needed in
at_xdmac_start_xfer(), thus remove it.

Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211215110115.191749-2-tudor.ambarus@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: deprecate token sysfs attributes for read buffers

The following sysfs attributes will be obsolete due to the name change of
tokens to read buffers:
max_tokens
token_limit
group/tokens_allowed
group/tokens_reserved
group/use_token_limit

Create new entries and have old entry print warning of deprecation.

New attributes to replace the token ones:
max_read_buffers
read_buffer_limit
group/read_buffers_allowed
group/read_buffers_reserved
group/use_read_buffer_limit

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951339488.2988321.2424012059911316373.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: change bandwidth token to read buffers

DSA spec v1.2 has changed the term of "bandwidth tokens" to "read buffers"
in order to make the concept clearer. Deprecate bandwidth token
naming in the driver and convert to read buffers in order to match with
the spec and reduce confusion when reading the spec.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951338932.2988321.6162640806935567317.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: fix wq settings post wq disable

By the spec, wq size and group association is not changeable unless device
is disabled. Exclude clearing the shadow copy on wq disable/reset. This
allows wq type to be changed after disable to be re-enabled.

Move the size and group association to its own cleanup and only call it
during device disable.

Fixes: 0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device")
Reported-by: Lucas Van <lucas.van@intel.com>
Tested-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163951291732.2987775.13576571320501115257.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: change MSIX allocation based on per wq activation

Change the driver where WQ interrupt is requested only when wq is being
enabled. This new scheme set things up so that request_threaded_irq() is
only called when a kernel wq type is being enabled. This also sets up for
future interrupt request where different interrupt handler such as wq
occupancy interrupt can be setup instead of the wq completion interrupt.

Not calling request_irq() until the WQ actually needs an irq also prevents
wasting of CPU irq vectors on x86 systems, which is a limited resource.

idxd_flush_pending_descs() is moved to device.c since descriptor flushing
is now part of wq disable rather than shutdown().

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163942149487.2412839.6691222855803875848.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: fix descriptor flushing locking

The descriptor flushing for shutdown is not holding the irq_entry list
lock. If there's ongoing interrupt completion handling, this can corrupt
the list. Add locking to protect list walking. Also refactor the code so
it's more compact.

Fixes: 8f47d1a5e545 ("dmaengine: idxd: connect idxd to dmaengine subsystem")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163942148935.2412839.18282664745572777280.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: embed irq_entry in idxd_wq struct

With irq_entry already being associated with the wq in a 1:1 relationship,
embed the irq_entry in the idxd_wq struct and remove back pointers for
idxe_wq and idxd_device. In the process of this work, clean up the interrupt
handle assignment so that there's no decision to be made during submit
call on where interrupt handle value comes from. Set the interrupt handle
during irq request initialization time.

irq_entry 0 is designated as special and is tied to the device itself.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163942148362.2412839.12055447853311267866.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: ioatdma: use default_groups in kobj_type

There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field.  Move the ioatdma sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.

Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20220104163330.1338824-1-gregkh@linuxfoundation.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Merge branch 'fixes' into next

We have a conflict in idxd driver between 'fixes' and 'next' and there
are patches dependent on this so, merge the 'fixes' branch into next

dmaengine: uniphier-xdmac: Fix type of address variables

The variables src_addr and dst_addr handle DMA addresses, so these should
be declared as dma_addr_t.

Fixes: 667b9251440b ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1639456963-10232-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: xilinx_dpdma: use correct SDPX tag for header file

Commit 188c310bdd5d ("dmaengine: xilinx_dpdma: stop using slave_id
field") add the header file with incorrect format for SPDX tag, fix that

WARNING: Improper SPDX comment style for 'include/linux/dma/xilinx_dpdma.h', please use '/*' instead
#1: FILE: include/linux/dma/xilinx_dpdma.h:1:
+// SPDX-License-Identifier: GPL-2.0

WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
#1: FILE: include/linux/dma/xilinx_dpdma.h:1:
+// SPDX-License-Identifier: GPL-2.0

Fixes: 188c310bdd5d ("dmaengine: xilinx_dpdma: stop using slave_id field")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211213052141.850807-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: dma: pl330: Convert to DT schema

Convert the Arm PL330 DMA controller binding to DT schema.

The '#dma-channels' and '#dma-requests' properties are unused as they are
discoverable and are non-standard (the standard props don't have '#'). So
drop them from the binding.

Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217170644.3145332-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: stm32-mdma: fix STM32_MDMA_CTBR_TSEL_MASK

This patch fixes STM32_MDMA_CTBR_TSEL_MASK, which is [5:0], not [7:0].

Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211220165827.1238097-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: rcar-dmac: Add support for R-Car S4-8

Add support for R-Car S4-8. We can reuse R-Car V3U code so that
renames variable names as "gen4".

Note that some registers of R-Car V3U do not exist on R-Car S4-8,
but none of them are used by the driver for now.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211222114507.1252947-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: renesas,rcar-dmac: Add r8a779f0 support

Document the compatible value for the Direct Memory Access Controller
blocks in the Renesas R-Car S4-8 (R8A779F0) SoC.

The most visible difference with DMAC blocks on other R-Car SoCs
(except R8A779A0) is the move of the per-channel registers to
a separate register block.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211222114507.1252947-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Merge tag 'dmaengine_topic_slave_id_removal_5.17' into next

Merge the tag dmaengine_topic_slave_id_removal_5.17 into next. This
brings in the slave_id removal topic changes

dmaengine: sh: Use bitmap_zalloc() when applicable

'shdma_slave_used' is a bitmap. So use 'bitmap_zalloc()' to simplify code,
improve the semantic and avoid some open-coded arithmetic in allocator
arguments.

Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3efaf2784424ae3d7411dc47f8b6b03e7bb8c059.1637702701.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: stm32-mdma: Use bitfield helpers

Use the FIELD_{GET,PREP}() helpers, instead of defining custom macros
implementing the same operations.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/36ceab242a594233dc7dc6f1dddb4ac32d1e846f.1637593297.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: stm32-mdma: Remove redundant initialization of pointer hwdesc

The pointer hwdesc is being initialized with a value that is never
read, it is being updated later in a for-loop. The assignment is
redundant and can be removed.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211204140032.548066-1-colin.i.king@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: add knob for enqcmds retries

Add a sysfs knob to allow tuning of retries for the kernel ENQCMDS
descriptor submission. While on host, it is not as likely that ENQCMDS
return busy during normal operations due to the driver controlling the
number of descriptors allocated for submission. However, when the driver is
operating as a guest driver, the chance of retry goes up significantly due
to sharing a wq with multiple VMs. A default value is provided with the
system admin being able to tune the value on a per WQ basis.

Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163820629464.2702134.7577370098568297574.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: set defaults for wq configs

Add default values for wq size, max_xfer_size and max_batch_size. These
values should provide a general guidance for the wq configuration when
the user does not specify any specific values.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528473483.3926048.7950067926287180976.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: dma: snps,dw-axi-dmac: Document optional reset

"make dtbs_check":

    Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
    arch/riscv/boot/dts/canaan/sipeed_maix_bit.dt.yaml: dma-controller@50000000: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+'
    From schema: Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml

The Synopsys DesignWare AXI DMA Controller on the Canaan K210 SoC
exposes its reset signal.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20211125152008.162571-1-geert@linux-m68k.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: jz4780: Support bidirectional I/O on one channel

For some devices with only half-duplex capabilities, it doesn't make
much sense to use one DMA channel per direction, as both channels will
never be active at the same time.

Add support for bidirectional I/O on DMA channels. The client drivers
can then request a "tx-rx" DMA channel which will be used for both
directions.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211206174259.68133-7-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: jz4780: Replace uint32_t with u32

Replace the uint32_t type used all over dma-jz4780.c with the equivalent
Linux type: u32.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211206174259.68133-6-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: jz4780: Add support for the MDMA and BDMA in the JZ4760(B)

The JZ4760 and JZ4760B SoCs have two regular DMA controllers with 6
channels each. They also have an extra DMA controller named MDMA
with only 2 channels, that only supports memcpy operations, and one
named BDMA with only 3 channels, that is mostly used for transfers
between memories and the BCH controller.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211206174259.68133-5-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: jz4780: Work around hardware bug on JZ4760 SoCs

The JZ4760 SoC has a hardware problem with chan0 not enabling properly
if it's enabled before chan1, after a reset (works fine afterwards).
This is worked around in the probe function by just enabling then
disabling chan1.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211206174259.68133-4-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: dma: ingenic: Support #dma-cells = <3>

Extend the binding to support specifying a different request type for
each direction.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211206174259.68133-3-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: dma: ingenic: Add compatible strings for MDMA and BDMA

The JZ4760 and JZ4760B SoCs have two additional DMA controllers: the
MDMA, which only supports memcpy operations, and the BDMA which is
mostly used for transfer between memories and the BCH controller.
The JZ4770 also features the same BDMA as in the JZ4760B, but does not
seem to have a MDMA.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206174259.68133-2-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: dma: ti: Add missing ti,k3-sci-common.yaml reference

The TI k3-bcdma and k3-pktdma both use 'ti,sci' and 'ti,sci-dev-id'
properties defined in ti,k3-sci-common.yaml. When 'unevaluatedProperties'
support is enabled, the follow warning is generated:

Documentation/devicetree/bindings/dma/ti/k3-bcdma.example.dt.yaml: dma-controller@485c0100: Unevaluated properties are not allowed ('ti,sci', 'ti,sci-dev-id' were unexpected)
Documentation/devicetree/bindings/dma/ti/k3-pktdma.example.dt.yaml: dma-controller@485c0000: Unevaluated properties are not allowed ('ti,sci', 'ti,sci-dev-id' were unexpected)

Add a reference to ti,k3-sci-common.yaml to fix this.

Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206174226.2298135-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: dma: pl08x: Fix unevaluatedProperties warnings

With 'unevaluatedProperties' support implemented, the example has
warnings on primecell properties and 'resets':

Documentation/devicetree/bindings/dma/arm-pl08x.example.dt.yaml: dma-controller@67000000: Unevaluated properties are not allowed ('arm,primecell-periphid', 'resets' were unexpected)

Add the missing reference to primecell.yaml and definition for 'resets'.

Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206174231.2298349-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

drivers: dma: ti: k3-psil: Add support for J721S2

Add support for J721S2 SOC.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20211119132315.15901-3-a-govindraju@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: ti: k3-udma: Add SoC dependent data for J721S2 SoC

Add SYSFW defined rchan_oes_offset number for J721S2 SoC in soc data.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20211119132315.15901-2-a-govindraju@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: at_xdmac: Use struct_size() in devm_kzalloc()

Make use of the struct_size() helper instead of an open-coded version, in
order to avoid any potential type mistakes or integer overflows that, in
the worst scenario, could lead to heap overflows.

Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211208001013.GA62330@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: xilinx: Handle IRQ mapping errors

Handle errors when trying to map the IRQ for the DMA channels.

The main motivation here is to be able to handle probe deferral. E.g. when
using DT overlays it is possible that the DMA controller is probed before
interrupt controller, depending on the order in the DT.

In order to support this switch from irq_of_parse_and_map() to
of_irq_get(), which internally does the same, but it will return
EPROBE_DEFER when the interrupt controller is not yet available.

As a result other errors, such as an invalid IRQ specification, or missing
IRQ are also properly handled.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20211208114212.234130-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: remove slave_id config field

All references to the slave_id field have been removed, so remove the
field as well to prevent new references from creeping in again.

Originally this allowed slave DMA drivers to configure which device
is accessed with the dmaengine_slave_config() call, but this was
inconsistent, as the same information is also passed while requesting
a channel, and never changes in practice.

In modern kernels, the device is always selected when requesting
the channel, so the .slave_id field is no longer useful.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-12-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: xilinx_dpdma: stop using slave_id field

The display driver wants to pass a custom flag to the DMA engine driver,
which it started doing by using the slave_id field that was traditionally
used for a different purpose.

As there is no longer a correct use for the slave_id field, it should
really be removed, and the remaining users changed over to something
different.

The new mechanism for passing nonstandard settings is using the
.peripheral_config field, so use that to pass a newly defined structure
here, making it clear that this will not work in portable drivers.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-10-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: qcom-adm: stop abusing slave_id config

The slave_id was previously used to pick one DMA slave instead of another,
but this is now done through the DMA descriptors in device tree.

For the qcom_adm driver, the configuration is documented in the DT
binding to contain a tuple of device identifier and a "crci" field,
but the implementation ends up using only a single cell for identifying
the slave, with the crci getting passed in nonstandard properties of
the device, and passed through the dma driver using the old slave_id
field. Part of the problem apparently is that the nand driver ends up
using only a single DMA request ID, but requires distinct values for
"crci" depending on the type of transfer.

Change both the dmaengine driver and the two slave drivers to allow
the documented binding to work in addition to the ad-hoc passing
of crci values. In order to no longer abuse the slave_id field, pass
the data using the "peripheral_config" mechanism instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-9-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: sprd: stop referencing config->slave_id

It appears that the code that reads the slave_id from the channel config
was copied incorrectly from other drivers. Nothing ever sets this field
on platforms that use this driver, so remove the reference.

Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-8-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: pxa/mmp: stop referencing config->slave_id

The last driver referencing the slave_id on Marvell PXA and MMP platforms
was the SPI driver, but this stopped doing so a long time ago, so the
TODO from the earlier patch can no be removed.

Fixes: b729bf34535e ("spi/pxa2xx: Don't use slave_id of dma_slave_config")
Fixes: 13b3006b8ebd ("dma: mmp_pdma: add filter function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-7-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: shdma: remove legacy slave_id parsing

The slave device is picked through either devicetree or a filter
function, and any remaining out-of-tree drivers would have warned
about this usage since 2015.

Stop interpreting the field finally so it can be removed from
the interface.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-6-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

mmc: bcm2835: stop setting chan_config->slave_id

The field is not interpreted by the DMA engine driver, as all the data
is passed from devicetree instead. Remove the assignment so the field
can eventually be deleted.

Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-5-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

spi: pic32: stop setting dma_config->slave_id

Setting slave_id makes no sense with DT based probing, and
should eventually get removed entirely. Address this driver
by no longer setting the field here.

I could not find which DMA driver is used on PIC32, if it's
in the tree at all, but none of the obvious ones even care
about slave_id any more.

Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211122222203.4103644-4-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

ASoC: dai_dma: remove slave_id field

This field is no longer set from any driver now, so remove the
last references as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-3-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: tegra20-apb: stop checking config->slave_id

Nothing sets the slave_id field any more, so stop accessing
it to allow the removal of this field.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-11-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

ASoC: tegra20-spdif: stop setting slave_id

The DMA resource is never set up anywhere, and passing this as slave_id
has not been the proper procedure in a long time.

As a preparation for removing all slave_id references from the ALSA code,
remove this one.

According to Dmitry Osipenko, this driver has never been used and
the mechanism for configuring DMA would not work as it is implemented,
so this part will get rewritten when the driver gets put into use
again in the future.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-2-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: st_fdma: fix MODULE_ALIAS

modprobe can't handle spaces in aliases.

Fixes: 6b4cd727eaf1 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20211125154441.2626214-1-hi@alyssa.is
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: fix missed completion on abort path

Ming reported that with the abort path of the descriptor submission, there
can be a window where a completed descriptor can be missed to be completed
by the irq completion thread:

CPU A CPU B
Submit (successful)

Submit (fail)
irq_process_work_list() // empty

llist_abort_desc()
// remove all descs from pending list

irq_process_pending_llist() // empty
exit idxd_wq_thread() with no processing

Add opportunistic descriptor completion in the abort path in order to
remove the missed completion.

Fixes: 6b4b87f2c31a ("dmaengine: idxd: fix submission race window")
Reported-by: Ming Li <ming4.li@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163898288714.443911.16084982766671976640.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: ti: k3-udma: Fix smatch warnings

Smatch reports below warnings [1] wrt dereferencing rm_res when it can
potentially be ERR_PTR(). This is possible when entire range is
allocated to Linux
Fix this case by making sure, there is no deference of rm_res when its
ERR_PTR().

[1]:
 drivers/dma/ti/k3-udma.c:4524 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
 drivers/dma/ti/k3-udma.c:4537 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
 drivers/dma/ti/k3-udma.c:4681 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
 drivers/dma/ti/k3-udma.c:4696 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
 drivers/dma/ti/k3-udma.c:4711 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
 drivers/dma/ti/k3-udma.c:4848 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()
 drivers/dma/ti/k3-udma.c:4861 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR()

Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20211209180957.29036-1-vigneshr@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: ppc4xx: remove unused variable `rval'

The variable used for returning status in
`ppc440spe_adma_dma2rxor_prep_src' function is never changed
and this function just need to return 0. Thus, the `rval' can
be removed and return 0 from `ppc440spe_adma_dma2rxor_prep_src'.

Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Link: https://lore.kernel.org/r/20211114060856.239314-1-wangborong@cdjrlc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Documentation: dmaengine: Correctly describe dmatest with channel unset

Currently the documentation states that channels must be configured before
running the dmatest. This has not been true since commit 6b41030fdc79
("dmaengine: dmatest: Restore default for channel"). Fix accordingly.

Fixes: 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20211118100952.27268-3-daniel.thompson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Documentation: dmaengine: Add a description of what dmatest does

Currently it can difficult to determine what dmatest does without
reading the source code. Let's add a description.

The description is taken mostly from the patch header of
commit 4a776f0aa922 ("dmatest: Simple DMA memcpy test client").
It has been edited and updated slightly. Nevertheless the new text was
largely written by Haarvard Skinnemoen and was copied from another
patch, already committed to the kernel, which has Haarvard's SoB:
attached to it.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211118100952.27268-2-daniel.thompson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: fix calling wq quiesce inside spinlock

Dan reports that smatch has found idxd_wq_quiesce() is being called inside
the idxd->dev_lock. idxd_wq_quiesce() calls wait_for_completion() and
therefore it can sleep. Move the call outside of the spinlock as it does
not need device lock.

Fixes: 5b0c68c473a1 ("dmaengine: idxd: support reporting of halt interrupt")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163716858508.1721911.15051495873516709923.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: qcom: gpi: Remove unnecessary print function dev_err()

The print function dev_err() is redundant because
platform_get_irq() already prints an error.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211116013306.784-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: dw-edma: Fix return value check for dma_set_mask_and_coherent()

The commit in the Fixes: tag has changed the logic of the code and now it
is likely that the probe will return an early success (0), even if not
completely executed.

This should lead to a crash or similar issue later on when the code
accesses to some never allocated resources.

Change the '!err' into a 'err' when checking if
'dma_set_mask_and_coherent()' has failed or not.

While at it, simplify the code and remove the "can't success code" related
to 32 DMA mask.
As stated in [1], 'dma_set_mask_and_coherent(DMA_BIT_MASK(64))' can't fail
if 'dev->dma_mask' is non-NULL. And if it is NULL, it would fail for the
same reason when tried with DMA_BIT_MASK(32).

[1]: https://lkml.org/lkml/2021/6/7/398

Fixes: ecb8c88bd31c ("dmaengine: dw-edma-pcie: switch from 'pci_' to 'dma_' API")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/935fbb40ae930c5fe87482a41dcb73abf2257973.1636492127.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.

This new CDMA binding for device_prep_dma_memcpy_sg was partially borrowed
from xlnx kernel tree, an expanded with extended address space support when
linking descriptor segments and checking for incorrect zero transfer size.

Signed-off-by: Adrian Larumbe <adrianml@alumnos.upm.es>
Link: https://lore.kernel.org/r/20211101180825.241048-4-adrianml@alumnos.upm.es
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: Add core function and capability check for DMA_MEMCPY_SG

This is the old DMA_SG interface that was removed in commit
c678fa66341c ("dmaengine: remove DMA_SG as it is dead code in kernel"). It
has been renamed to DMA_MEMCPY_SG to better match the MEMSET and MEMSET_SG
naming convention.

It should only be used for mem2mem copies, either main system memory or
CPU-addressable device memory (like video memory on a PCI graphics card).

Bringing back this interface was prompted by the need to use the Xilinx
CDMA device for mem2mem SG transfers.

Signed-off-by: Adrian Larumbe <adrianml@alumnos.upm.es>
Link: https://lore.kernel.org/r/20211101180825.241048-3-adrianml@alumnos.upm.es
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: Add documentation for new memcpy scatter-gather function

Documentation describes semantics, limitations and a typical use case
scenario.

Signed-off-by: Adrian Larumbe <adrianml@alumnos.upm.es>
Link: https://lore.kernel.org/r/20211101180825.241048-2-adrianml@alumnos.upm.es
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: dw-axi-dmac: Fix uninitialized variable in axi_chan_block_xfer_start()

Coverity complains of an uninitialized variable:

5. uninit_use_in_call: Using uninitialized value config.dst_per when calling axi_chan_config_write. [show details]
6. uninit_use_in_call: Using uninitialized value config.hs_sel_src when calling axi_chan_config_write. [show details]
CID 121164 (#1-3 of 3): Uninitialized scalar variable (UNINIT)
7. uninit_use_in_call: Using uninitialized value config.src_per when calling axi_chan_config_write. [show details]
418        axi_chan_config_write(chan, &config);

Fix this by initializing the structure to 0 which should at least be benign in axi_chan_config_write(). Also fix
what looks like a cut-n-paste error when initializing config.hs_sel_dst.

Fixes: 824351668a413 ("dmaengine: dw-axi-dmac: support DMAX_NUM_CHANNELS > 8")
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Link: https://lore.kernel.org/r/20211025181656.31658-1-tim.gardner@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: handle interrupt handle revoked event

"Interrupt handle revoked" is an event that happens when the driver is
running on a guest kernel and the VM is migrated to a new machine.
The device will trigger an interrupt that signals to the guest driver
that the interrupt handles need to be replaced.

The misc irq thread function calls a helper function to handle the
event. The function uses the WQ percpu_ref to quiesce the kernel
submissions. It then replaces the interrupt handles by requesting
interrupt handle command for each I/O MSIX vector. Once the handle is
updated, the driver will unblock the submission path to allow new
submissions.

The submitter will attempt to acquire a percpu_ref before submission. When
the request fails, it will wait on the wq_resurrect 'completion'.

The driver does anticipate the possibility of descriptors being submitted
before the WQ percpu_ref is killed. If a descriptor has already been
submitted, it will return with incorrect interrupt handle status. The
descriptor will be re-submitted with the new interrupt handle on the
completion path. For descriptors with incorrect interrupt handles,
completion interrupt won't be triggered.

At the completion of the interrupt handle refresh, the handling function
will call idxd_int_handle_refresh_drain() to issue drain descriptors to
each of the wq with associated interrupt handle. The drain descriptor will have
interrupt request set but without completion record. This will ensure all
descriptors with incorrect interrupt completion handle get drained and
a completion interrupt is triggered for the guest driver to process them.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Co-Developed-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528420189.3925689.18212568593220415551.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: handle invalid interrupt handle descriptors

Handle a descriptor that has been marked with invalid interrupt handle
error in status. Create a work item that will resubmit the descriptor. This
typically happens when the driver has handled the revoke interrupt handle
event and has a new interrupt handle.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528419601.3925689.4166517602890523193.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: create locked version of idxd_quiesce() call

Add a locked version of idxd_quiesce() call so that the quiesce can be
called with a lock in situations where the lock is not held by the caller.

In the driver probe/remove path, the lock is already held, so the raw
version can be called w/o locking.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528418980.3925689.5841907054957931211.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: add helper for per interrupt handle drain

The helper is called at the completion of the interrupt handle refresh
event. It issues drain descriptors to each of the wq with associated
interrupt handle. The drain descriptor will have interrupt request set but
without completion record. This will ensure all descriptors with incorrect
interrupt completion handle get drained and a completion interrupt is
triggered for the guest driver to process them.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528418315.3925689.7944718440052849626.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: move interrupt handle assignment

In preparation of supporting interrupt handle revoke event, move the
interrupt handle assignment to right before the descriptor to be submitted.
This allows the interrupt handle revoke logic to assign the latest
interrupt handle on submission.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528417767.3925689.7730411152122952808.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: int handle management refactoring

Attach int_handle to irq_entry. This removes the separate management of int
handles and reduces the confusion of interating through int handles that is
off by 1 count.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528417065.3925689.11505755433684476288.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: idxd: rework descriptor free path on failure

Refactor the completion function to allow skipping of descriptor freeing on
the submission failure path. This completely removes descriptor freeing
from the submit failure path and leave the responsibility to the caller.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163528416222.3925689.12859769271667814762.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

dmaengine: ti: edma: Use 'for_each_set_bit' when possible

Use 'for_each_set_bit()' instead of hand wrinting it. It is much less
version.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/47a7415d3aff8dfb66780bd6f80b085db4503bf7.1637263609.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Linux 5.16-rc1

kconfig: Add support for -Wimplicit-fallthrough

Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.

The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.

Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.

This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)

Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8
Link: https://bugs.llvm.org/show_bug.cgi?id=51094
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'xfs-5.16-merge-5' of git://git./fs/xfs/xfs-linux

Pull xfs cleanups from Darrick Wong:
 "The most 'exciting' aspect of this branch is that the xfsprogs
  maintainer and I have worked through the last of the code
  discrepancies between kernel and userspace libxfs such that there are
  no code differences between the two except for #includes.

  IOWs, diff suffices to demonstrate that the userspace tools behave the
  same as the kernel, and kernel-only bits are clearly marked in the
  /kernel/ source code instead of just the userspace source.

  Summary:

   - Clean up open-coded swap() calls.

   - A little bit of #ifdef golf to complete the reunification of the
     kernel and userspace libxfs source code"

* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: sync xfs_btree_split macros with userspace libxfs
  xfs: #ifdef out perag code for userspace
  xfs: use swap() to make dabtree code cleaner

Merge tag 'for-5.16/parisc-3' of git://git./linux/kernel/git/deller/parisc-linux

Pull more parisc fixes from Helge Deller:
 "Fix a build error in stracktrace.c, fix resolving of addresses to
  function names in backtraces, fix single-stepping in assembly code and
  flush userspace pte's when using set_pte_at()"

* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/entry: fix trace test in syscall exit path
  parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
  parisc: Fix implicit declaration of function '__kernel_text_address'
  parisc: Fix backtrace to always include init funtion names

Merge tag 'sh-for-5.16' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker.

* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
  sh: pgtable-3level: Fix cast to pointer from integer of different size
  sh: fix READ/WRITE redefinition warnings
  sh: define __BIG_ENDIAN for math-emu
  sh: math-emu: drop unused functions
  sh: fix kconfig unmet dependency warning for FRAME_POINTER
  sh: Cleanup about SPARSE_IRQ
  sh: kdump: add some attribute to function
  maple: fix wrong return value of maple_bus_init().
  sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
  sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
  sh: boards: Fix the cacography in irq.c
  sh: check return code of request_irq
  sh: fix trivial misannotations

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - Fix early_iounmap

 - Drop cc-option fallbacks for architecture selection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9156/1: drop cc-option fallbacks for architecture selection
  ARM: 9155/1: fix early early_iounmap()

Merge tag 'devicetree-fixes-for-5.16-1' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Two fixes due to DT node name changes on Arm, Ltd. boards

 - Treewide rename of Ingenic CGU headers

 - Update ST email addresses

 - Remove Netlogic DT bindings

 - Dropping few more cases of redundant 'maxItems' in schemas

 - Convert toshiba,tc358767 bridge binding to schema

* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: watchdog: sunxi: fix error in schema
  bindings: media: venus: Drop redundant maxItems for power-domain-names
  dt-bindings: Remove Netlogic bindings
  clk: versatile: clk-icst: Ensure clock names are unique
  of: Support using 'mask' in making device bus id
  dt-bindings: treewide: Update @st.com email address to @foss.st.com
  dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
  dt-bindings: media: Update maintainers for st,stm32-cec.yaml
  dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
  dt-bindings: timer: Update maintainers for st,stm32-timer
  dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
  dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
  dt-bindings: Rename Ingenic CGU headers to ingenic,*.h

Merge tag 'timers-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
 "A single fix for POSIX CPU timers to address a problem where POSIX CPU
  timer delivery stops working for a new child task because
  copy_process() copies state information which is only valid for the
  parent task"

* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()

Merge tag 'irq-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem

  Core code:

   - A regression fix for the Open Firmware interrupt mapping code where
     a interrupt controller property in a node caused a map property in
     the same node to be ignored.

  Interrupt chip drivers:

   - Workaround a limitation in SiFive PLIC interrupt chip which
     silently ignores an EOI when the interrupt line is masked.

   - Provide the missing mask/unmask implementation for the CSKY MP
     interrupt controller.

  PCI/MSI:

   - Prevent a use after free when PCI/MSI interrupts are released by
     destroying the sysfs entries before freeing the memory which is
     accessed in the sysfs show() function.

   - Implement a mask quirk for the Nvidia ION AHCI chip which does not
     advertise masking capability despite implementing it. Even worse
     the chip comes out of reset with all MSI entries masked, which due
     to the missing masking capability never get unmasked.

   - Move the check which prevents accessing the MSI[X] masking for XEN
     back into the low level accessors. The recent consolidation missed
     that these accessors can be invoked from places which do not have
     that check which broke XEN. Move them back to he original place
     instead of sprinkling tons of these checks all over the code"

* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  of/irq: Don't ignore interrupt-controller when interrupt-map failed
  irqchip/sifive-plic: Fixup EOI failed when masked
  irqchip/csky-mpintc: Fixup mask/unmask implementation
  PCI/MSI: Destroy sysfs before freeing entries
  PCI: Add MSI masking quirk for Nvidia ION AHCI
  PCI/MSI: Deal with devices lying about their MSI mask capability
  PCI/MSI: Move non-mask check back into low level accessors

Merge tag 'locking-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip

Pull x86 static call update from Thomas Gleixner:
 "A single fix for static calls to make the trampoline patching more
  robust by placing explicit signature bytes after the call trampoline
  to prevent patching random other jumps like the CFI jump table
  entries"

* tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  static_call,x86: Robustify trampoline patching

Merge tag 'sched_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

 - Avoid touching ~100 config files in order to be able to select the
   preemption model

 - clear cluster CPU masks too, on the CPU unplug path

 - prevent use-after-free in cfs

 - Prevent a race condition when updating CPU cache domains

 - Factor out common shared part of smp_prepare_cpus() into a common
   helper which can be called by both baremetal and Xen, in order to fix
   a booting of Xen PV guests

* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  preempt: Restore preemption model selection configs
  arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
  sched/fair: Prevent dead task groups from regaining cfs_rq's
  sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
  x86/smp: Factor out parts of native_smp_prepare_cpus()

Merge tag 'perf_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

 - Prevent unintentional page sharing by checking whether a page
   reference to a PMU samples page has been acquired properly before
   that

 - Make sure the LBR_SELECT MSR is saved/restored too

 - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any
   residual data left

* tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Avoid put_page() when GUP fails
  perf/x86/vlbr: Add c->flags to vlbr event constraints
  perf/x86/lbr: Reset LBR_SELECT during vlbr reset

Merge tag 'x86_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Add the model number of a new, Raptor Lake CPU, to intel-family.h

 - Do not log spurious corrected MCEs on SKL too, due to an erratum

 - Clarify the path of paravirt ops patches upstream

 - Add an optimization to avoid writing out AMX components to sigframes
   when former are in init state

* tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add Raptor Lake to Intel family
  x86/mce: Add errata workaround for Skylake SKX37
  MAINTAINERS: Add some information to PARAVIRT_OPS entry
  x86/fpu: Optimize out sigframe xfeatures when in init state

Merge tag 'perf-tools-for-v5.16-2021-11-13' of git://git./linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:
 "Hardware tracing:

   - ARM:
      * Print the size of the buffer size consistently in hexadecimal in
        ARM Coresight.
      * Add Coresight snapshot mode support.
      * Update --switch-events docs in 'perf record'.
      * Support hardware-based PID tracing.
      * Track task context switch for cpu-mode events.

   - Vendor events:
      * Add metric events JSON file for power10 platform

  perf test:

   - Get 'perf test' unit tests closer to kunit.

   - Topology tests improvements.

   - Remove bashisms from some tests.

  perf bench:

   - Fix memory leak of perf_cpu_map__new() in the futex benchmarks.

  libbpf:

   - Add some more weak libbpf functions o allow building with the
     libbpf versions, old ones, present in distros.

  libbeauty:

   - Translate [gs]setsockopt 'level' argument integer values to
     strings.

  tools headers UAPI:

   - Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files
     with the kernel sources.

  Documentation:

   - Add documentation to 'struct symbol'.

   - Synchronize the definition of enum perf_hw_id with code in
     tools/perf/design.txt"

* tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
  perf tests: Remove bash constructs from stat_all_pmu.sh
  perf tests: Remove bash construct from record+zstd_comp_decomp.sh
  perf test: Remove bash construct from stat_bpf_counters.sh test
  perf bench futex: Fix memory leak of perf_cpu_map__new()
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync sound/asound.h with the kernel sources
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools headers UAPI: Sync arch prctl headers with the kernel sources
  perf tools: Add more weak libbpf functions
  perf bpf: Avoid memory leak from perf_env__insert_btf()
  perf symbols: Factor out annotation init/exit
  perf symbols: Bit pack to save a byte
  perf symbols: Add documentation to 'struct symbol'
  tools headers UAPI: Sync files changed by new futex_waitv syscall
  perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning
  perf arm-spe: Support hardware-based PID tracing
  perf arm-spe: Save context ID in record
  perf arm-spe: Update --switch-events docs in 'perf record'
  perf arm-spe: Track task context switch for cpu-mode events
  ...

Merge tag 'irqchip-fixes-5.16-1' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

  - Address an issue with the SiFive PLIC being unable to EOI
    a masked interrupt

  - Move the disable/enable methods in the CSky mpintc to
    mask/unmask

  - Fix a regression in the OF irq code where an interrupt-controller
    property in the same node as an interrupt-map property would get
    ignored

Link: https://lore.kernel.org/all/20211112173459.4015233-1-maz@kernel.org

Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux

Pull zstd update from Nick Terrell:
 "Update to zstd-1.4.10.

  Add myself as the maintainer of zstd and update the zstd version in
  the kernel, which is now 4 years out of date, to a much more recent
  zstd release. This includes bug fixes, much more extensive fuzzing,
  and performance improvements. And generates the kernel zstd
  automatically from upstream zstd, so it is easier to keep the zstd
  verison up to date, and we don't fall so far out of date again.

  This includes 5 commits that update the zstd library version:

   - Adds a new kernel-style wrapper around zstd.

     This wrapper API is functionally equivalent to the subset of the
     current zstd API that is currently used. The wrapper API changes to
     be kernel style so that the symbols don't collide with zstd's
     symbols. The update to zstd-1.4.10 maintains the same API and
     preserves the semantics, so that none of the callers need to be
     updated. All callers are updated in the commit, because there are
     zero functional changes.

   - Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
     depend on the layout of `lib/zstd/` to include every source file.
     This allows the next patch to be automatically generated.

   - Imports the zstd-1.4.10 source code. This commit is automatically
     generated from upstream zstd (https://github.com/facebook/zstd).

   - Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.

   - Fixes a newly added build warning for clang.

  The discussion around this patchset has been pretty long, so I've
  included a FAQ-style summary of the history of the patchset, and why
  we are taking this approach.

  Why do we need to update?
  -------------------------

  The zstd version in the kernel is based off of zstd-1.3.1, which is
  was released August 20, 2017. Since then zstd has seen many bug fixes
  and performance improvements. And, importantly, upstream zstd is
  continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
  older versions. So the only way to sanely get these fixes is to keep
  up to date with upstream zstd.

  There are no known security issues that affect the kernel, but we need
  to be able to update in case there are. And while there are no known
  security issues, there are relevant bug fixes. For example the problem
  with large kernel decompression has been fixed upstream for over 2
  years [1]

  Additionally the performance improvements for kernel use cases are
  significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:

   - BtrFS zstd compression at levels 1 and 3 is 5% faster

   - BtrFS zstd decompression+read is 15% faster

   - SquashFS zstd decompression+read is 15% faster

   - F2FS zstd compression+write at level 3 is 8% faster

   - F2FS zstd decompression+read is 20% faster

   - ZRAM decompression+read is 30% faster

   - Kernel zstd decompression is 35% faster

   - Initramfs zstd decompression+build is 5% faster

  On top of this, there are significant performance improvements coming
  down the line in the next zstd release, and the new automated update
  patch generation will allow us to pull them easily.

  How is the update patch generated?
  ----------------------------------

  The first two patches are preparation for updating the zstd version.
  Then the 3rd patch in the series imports upstream zstd into the
  kernel. This patch is automatically generated from upstream. A script
  makes the necessary changes and imports it into the kernel. The
  changes are:

   - Replace all libc dependencies with kernel replacements and rewrite
     includes.

   - Remove unncessary portability macros like: #if defined(_MSC_VER).

   - Use the kernel xxhash instead of bundling it.

  This automation gets tested every commit by upstream's continuous
  integration. When we cut a new zstd release, we will submit a patch to
  the kernel to update the zstd version in the kernel.

  The automated process makes it easy to keep the kernel version of zstd
  up to date. The current zstd in the kernel shares the guts of the
  code, but has a lot of API and minor changes to work in the kernel.
  This is because at the time upstream zstd was not ready to be used in
  the kernel envrionment as-is. But, since then upstream zstd has
  evolved to support being used in the kernel as-is.

  Why are we updating in one big patch?
  -------------------------------------

  The 3rd patch in the series is very large. This is because it is
  restructuring the code, so it both deletes the existing zstd, and
  re-adds the new structure. Future updates will be directly
  proportional to the changes in upstream zstd since the last import.
  They will admittidly be large, as zstd is an actively developed
  project, and has hundreds of commits between every release. However,
  there is no other great alternative.

  One option ruled out is to replay every upstream zstd commit. This is
  not feasible for several reasons:

   - There are over 3500 upstream commits since the zstd version in the
     kernel.

   - The automation to automatically generate the kernel update was only
     added recently, so older commits cannot easily be imported.

   - Not every upstream zstd commit builds.

   - Only zstd releases are "supported", and individual commits may have
     bugs that were fixed before a release.

  Another option to reduce the patch size would be to first reorganize
  to the new file structure, and then apply the patch. However, the
  current kernel zstd is formatted with clang-format to be more
  "kernel-like". But, the new method imports zstd as-is, without
  additional formatting, to allow for closer correlation with upstream,
  and easier debugging. So the patch wouldn't be any smaller.

  It also doesn't make sense to import upstream zstd commit by commit
  going forward. Upstream zstd doesn't support production use cases
  running of the development branch. We have a lot of post-commit
  fuzzing that catches many bugs, so indiviudal commits may be buggy,
  but fixed before a release. So going forward, I intend to import every
  (important) zstd release into the Kernel.

  So, while it isn't ideal, updating in one big patch is the only patch
  I see forward.

  Who is responsible for this code?
  ---------------------------------

  I am. This patchset adds me as the maintainer for zstd. Previously,
  there was no tree for zstd patches. Because of that, there were
  several patches that either got ignored, or took a long time to merge,
  since it wasn't clear which tree should pick them up. I'm officially
  stepping up as maintainer, and setting up my tree as the path through
  which zstd patches get merged. I'll make sure that patches to the
  kernel zstd get ported upstream, so they aren't erased when the next
  version update happens.

  How is this code tested?
  ------------------------

  I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
  Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
  aarch64. I checked both performance and correctness.

  Also, thanks to many people in the community who have tested these
  patches locally.

  Lastly, this code will bake in linux-next before being merged into
  v5.16.

  Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
  ------------------------------------------------------------

  This patchset has been outstanding since 2020, and zstd-1.4.10 was the
  latest release when it was created. Since the update patch is
  automatically generated from upstream, I could generate it from
  zstd-1.5.0.

  However, there were some large stack usage regressions in zstd-1.5.0,
  and are only fixed in the latest development branch. And the latest
  development branch contains some new code that needs to bake in the
  fuzzer before I would feel comfortable releasing to the kernel.

  Once this patchset has been merged, and we've released zstd-1.5.1, we
  can update the kernel to zstd-1.5.1, and exercise the update process.

  You may notice that zstd-1.4.10 doesn't exist upstream. This release
  is an artifical release based off of zstd-1.4.9, with some fixes for
  the kernel backported from the development branch. I will tag the
  zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
  is running a known version of zstd that can be debugged upstream.

  Why was a wrapper API added?
  ----------------------------

  The first versions of this patchset migrated the kernel to the
  upstream zstd API. It first added a shim API that supported the new
  upstream API with the old code, then updated callers to use the new
  shim API, then transitioned to the new code and deleted the shim API.
  However, Cristoph Hellwig suggested that we transition to a kernel
  style API, and hide zstd's upstream API behind that. This is because
  zstd's upstream API is supports many other use cases, and does not
  follow the kernel style guide, while the kernel API is focused on the
  kernel's use cases, and follows the kernel style guide.

  Where is the previous discussion?
  ---------------------------------

  Links for the discussions of the previous versions of the patch set
  below. The largest changes in the design of the patchset are driven by
  the discussions in v11, v5, and v1. Sorry for the mix of links, I
  couldn't find most of the the threads on lkml.org"

Link: https://lkml.org/lkml/2020/9/29/27
Link: https://www.spinics.net/lists/linux-crypto/msg58189.html
Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/
Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/
Link: https://lkml.org/lkml/2020/12/3/1195
Link: https://lkml.org/lkml/2020/12/2/1245
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html
Link: https://lkml.org/lkml/2020/9/23/1074
Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
* tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux:
  lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical
  MAINTAINERS: Add maintainer entry for zstd
  lib: zstd: Upgrade to latest upstream zstd version 1.4.10
  lib: zstd: Add decompress_sources.h for decompress_unzstd
  lib: zstd: Add kernel-specific API

Merge tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux

Pull virtio-mem update from David Hildenbrand:
 "Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem,
  now that "accidential" access to logically unplugged memory inside
  added Linux memory blocks is no longer possible, because we:

   - Removed /dev/kmem in commit bbcd53c96071 ("drivers/char: remove
     /dev/kmem for good")

   - Disallowed access to virtio-mem device memory via /dev/mem in
     commit 2128f4e21aa ("virtio-mem: disallow mapping virtio-mem memory
     via /dev/mem")

   - Sanitized access to virtio-mem device memory via /proc/kcore in
     commit 0daa322b8ff9 ("fs/proc/kcore: don't read offline sections,
     logically offline pages and hwpoisoned pages")

   - Sanitized access to virtio-mem device memory via /proc/vmcore in
     commit ce2814622e84 ("virtio-mem: kdump mode to sanitize
     /proc/vmcore access")

  The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be
  required by some hypervisors implementing virtio-mem in the near
  future, so let's support it now that we safely can"

* tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux:
  virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE

perf tests: Remove bash constructs from stat_all_pmu.sh

The tests were passing but without testing and were printing the
following:

  $ ./perf test -v 90
  90: perf all PMU test                                               :
  --- start ---
  test child forked, pid 51650
  Testing cpu/branch-instructions/
  ./tests/shell/stat_all_pmu.sh: 10: [:
   Performance counter stats for 'true':

             137,307      cpu/branch-instructions/

         0.001686672 seconds time elapsed

         0.001376000 seconds user
         0.000000000 seconds sys: unexpected operator

Changing the regexes to a grep works in sh and prints this:

  $ ./perf test -v 90
  90: perf all PMU test                                               :
  --- start ---
  test child forked, pid 60186
  [...]
  Testing tlb_flush.stlb_any
  test child finished with 0
  ---- end ----
  perf all PMU test: Ok

Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Remove bash construct from record+zstd_comp_decomp.sh

Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:

  $ ./perf test -v 85
  85: Zstd perf.data compression/decompression                        :
  --- start ---
  test child forked, pid 50643
  Collecting compressed record file:
  ./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found

Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Remove bash construct from stat_bpf_counters.sh test

Currently the test skips with an error because == only works in bash:

  $ ./perf test 91 -v
  Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
  91: perf stat --bpf-counters test                                   :
  --- start ---
  test child forked, pid 44586
  ./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator
  test child finished with -2
  ---- end ----
  perf stat --bpf-counters test: Skip

Changing == to = does the same thing, but doesn't result in an error:

  ./perf test 91 -v
  Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
  91: perf stat --bpf-counters test                                   :
  --- start ---
  test child forked, pid 45833
  Skipping: --bpf-counters not supported
    Error: unknown option `bpf-counters'
  [...]
  test child finished with -2
  ---- end ----
  perf stat --bpf-counters test: Skip

Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bench futex: Fix memory leak of perf_cpu_map__new()

ASan reports memory leaks while running:

  $ sudo ./perf bench futex all

The leaks are caused by perf_cpu_map__new not being freed.
This patch adds the missing perf_cpu_map__put since it calls
cpu_map_delete implicitly.

Fixes: 9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools arch x86: Sync the msr-index.h copy with the kernel sources

To pick up the changes in:

  dae1bd58389615d4 ("x86/msr-index: Add MSRs for XFD")

Addressing these tools/perf build warnings:

    diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
    Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'

That makes the beautification scripts to pick some new entries:

  $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
  --- tools/arch/x86/include/asm/msr-index.h 2021-07-15 16:17:01.819817827 -0300
  +++ arch/x86/include/asm/msr-index.h 2021-11-06 15:49:33.738517311 -0300
  @@ -625,6 +625,8 @@

   #define MSR_IA32_BNDCFGS_RSVD 0x00000ffc

  +#define MSR_IA32_XFD 0x000001c4
  +#define MSR_IA32_XFD_ERR 0x000001c5
   #define MSR_IA32_XSS 0x00000da0

   #define MSR_IA32_APICBASE 0x0000001b
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/after
  $ diff -u /tmp/before /tmp/after
  --- /tmp/before 2021-11-13 11:10:39.964201505 -0300
  +++ /tmp/after 2021-11-13 11:10:47.902410873 -0300
  @@ -93,6 +93,8 @@
    [0x000001b0] = "IA32_ENERGY_PERF_BIAS",
    [0x000001b1] = "IA32_PACKAGE_THERM_STATUS",
    [0x000001b2] = "IA32_PACKAGE_THERM_INTERRUPT",
  + [0x000001c4] = "IA32_XFD",
  + [0x000001c5] = "IA32_XFD_ERR",
    [0x000001c8] = "LBR_SELECT",
    [0x000001c9] = "LBR_TOS",
    [0x000001d9] = "IA32_DEBUGCTLMSR",
  $

And this gets rebuilt:

  CC       /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
  INSTALL  trace_plugins
  LD       /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
  LD       /tmp/build/perf/trace/beauty/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/perf

Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written with:

  # perf trace -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR"
  ^C#
  #

If we use -v (verbose mode) we can see what it does behind the scenes:

  # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR"
  <SNIP>
  New filter for msr:read_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781)
  New filter for msr:write_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781)
  <SNIP>
  ^C#

Example with a frequent msr:

  # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
  Using CPUID AuthenticAMD-25-21-0
  0x48
  New filter for msr:read_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564)
  0x48
  New filter for msr:write_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564)
  mmap size 528384B
  Looking at the vmlinux_path (8 entries long)
  symsrc__init: build id mismatch for vmlinux.
  Using /proc/kcore for kernel data
  Using /proc/kallsyms for symbols
       0.000 pipewire/2479 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
                                         do_trace_write_msr ([kernel.kallsyms])
                                         do_trace_write_msr ([kernel.kallsyms])
                                         __switch_to_xtra ([kernel.kallsyms])
                                         __switch_to ([kernel.kallsyms])
                                         __schedule ([kernel.kallsyms])
                                         schedule ([kernel.kallsyms])
                                         schedule_hrtimeout_range_clock ([kernel.kallsyms])
                                         do_epoll_wait ([kernel.kallsyms])
                                         __x64_sys_epoll_wait ([kernel.kallsyms])
                                         do_syscall_64 ([kernel.kallsyms])
                                         entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
                                         epoll_wait (/usr/lib64/libc-2.33.so)
                                         [0x76c4] (/usr/lib64/spa-0.2/support/libspa-support.so)
                                         [0x4cf0] (/usr/lib64/spa-0.2/support/libspa-support.so)
       0.027 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
                                         do_trace_write_msr ([kernel.kallsyms])
                                         do_trace_write_msr ([kernel.kallsyms])
                                         __switch_to_xtra ([kernel.kallsyms])
                                         __switch_to ([kernel.kallsyms])
                                         __schedule ([kernel.kallsyms])
                                         schedule_idle ([kernel.kallsyms])
                                         do_idle ([kernel.kallsyms])
                                         cpu_startup_entry ([kernel.kallsyms])
                                         start_kernel ([kernel.kallsyms])
                                         secondary_startup_64_no_verify ([kernel.kallsyms])
  #

Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YY%2FJdb6on7swsn+C@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync drm/i915_drm.h with the kernel sources

To pick up the changes in:

  e5e32171a2cf1e43 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
  9409eb35942713d0 ("drm/i915: Expose logical engine instance to user")
  ea673f17ab763879 ("drm/i915/uapi: Add comment clarifying purpose of I915_TILING_* values")
  d3ac8d42168a9be7 ("drm/i915/pxp: interfaces for using protected objects")
  cbbd3764b2399ad8 ("drm/i915/pxp: Create the arbitrary session after boot")

That don't add any new ioctl, so no changes in tooling.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Huang, Sean Z <sean.z.huang@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync sound/asound.h with the kernel sources

To pick up the changes in:

  5aec579e08e4f2be ("ALSA: uapi: Fix a C++ style comment in asound.h")

That is just changing a // style comment to /* */.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
  diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h

Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/prctl.h with the kernel sources

To pick the changes in:

  61bc346ce64a3864 ("uapi/linux/prctl: provide macro definitions for the PR_SCHED_CORE type argument")

That don't result in any changes in tooling:

  $ tools/perf/trace/beauty/prctl_option.sh > before
  $ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
  $ tools/perf/trace/beauty/prctl_option.sh > after
  $ diff -u before after
  $

Just silences this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
  diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h

Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync arch prctl headers with the kernel sources

To pick the changes in this cset:

  db8268df0983adc2 ("x86/arch_prctl: Add controls for dynamic XSTATE components")

This picks these new prctls:

  $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before
  $ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h
  $ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after
  $ diff -u /tmp/before /tmp/after
  --- /tmp/before 2021-11-13 10:42:52.787308809 -0300
  +++ /tmp/after 2021-11-13 10:43:02.295558837 -0300
  @@ -6,6 +6,9 @@
    [0x1004 - 0x1001]= "GET_GS",
    [0x1011 - 0x1001]= "GET_CPUID",
    [0x1012 - 0x1001]= "SET_CPUID",
  + [0x1021 - 0x1001]= "GET_XCOMP_SUPP",
  + [0x1022 - 0x1001]= "GET_XCOMP_PERM",
  + [0x1023 - 0x1001]= "REQ_XCOMP_PERM",
   };

   #define x86_arch_prctl_codes_2_offset 0x2001
  $

With this 'perf trace' can translate those numbers into strings and use
the strings in filter expressions:

  # perf trace -e prctl
       0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5)     = 0
       0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580)     = 0
       5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0
       5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0
      24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0
      24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0
     670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0
     670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0
  ^C#

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h'
  diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h

Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YY%2FER104k852WOTK@kernel.org/T/#u
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add more weak libbpf functions

We hit the window where perf uses libbpf functions, that did not make it
to the official libbpf release yet and it's breaking perf build with
dynamicly linked libbpf.

Fixing this by providing the new interface as weak functions which calls
the original libbpf functions. Fortunatelly the changes were just
renames.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211109140707.1689940-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bpf: Avoid memory leak from perf_env__insert_btf()

perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.

v2. Adds a return -1 when the insertion error occurs in
    perf_env__fetch_btf. This doesn't affect anything as the result is
    never checked.

Fixes: 3792cb2ff43b1b19 ("perf bpf: Save BTF in a rbtree in perf_env")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211112074525.121633-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Factor out annotation init/exit

The exit function fixes a memory leak with the src field as detected by
leak sanitizer. An example of which is:

Indirect leak of 25133184 byte(s) in 207 object(s) allocated from:
    #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154
    #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803
    #2 0x55defe6397e4 in symbol__hists util/annotate.c:952
    #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968
    #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119
    #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182
    #6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236
    #7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315
    #8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473
    #9 0x55defe731e38 in machines__deliver_event util/session.c:1510
    #10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590
    #11 0x55defe72951e in ordered_events__deliver_event util/session.c:183
    #12 0x55defe740082 in do_flush util/ordered-events.c:244
    #13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323
    #14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341
    #15 0x55defe73837f in __perf_session__process_events util/session.c:2390
    #16 0x55defe7385ff in perf_session__process_events util/session.c:2420
    ...

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Bit pack to save a byte

Use a bit field alongside the earlier bit fields.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf symbols: Add documentation to 'struct symbol'

Refactor some existing comments and then infer the rest.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync files changed by new futex_waitv syscall

To pick the changes in these csets:

  039c0ec9bb77446d ("futex,x86: Wire up sys_futex_waitv()")
  bf69bad38cf63d98 ("futex: Implement sys_futex_waitv()")

That add support for this new syscall in tools such as 'perf trace'.

For instance, this is now possible:

  # perf trace -e futex_waitv
  ^C#
  # perf trace -v -e futex_waitv
  Using CPUID AuthenticAMD-25-21-0
  event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
  mmap size 528384B
  ^C#
  # perf trace -v -e futex* --max-events 10
  Using CPUID AuthenticAMD-25-21-0
  event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 202 || id == 449)
  mmap size 528384B
           ? (         ): Timer/219310  ... [continued]: futex())                                            = -1 ETIMEDOUT (Connection timed out)
       0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
       0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.088 (         ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
       0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1)     = 1
       0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1)     = 1
       0.088 ( 0.089 ms): Timer/219310  ... [continued]: futex())                                            = 0
       0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.181 (         ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
  #

That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.

  $ grep futex_waitv tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
  449 common futex_waitv sys_futex_waitv
  $

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
  diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
  Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl

Cc: André Almeida <andrealmeid@collabora.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning

Address following coccicheck warnings:

  ./tools/perf/tests/bpf.c:316:22-23: WARNING: Use ARRAY_SIZE.

Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: kernel@vivo.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211108070801.5540-1-guozhengkui@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>