staging: comedi: amplc_pci230: remove ai_chans member

All boards supported by the "amplc_pci230" driver have 16 AI channels,
so the `ai_chans` member of `struct pci230_board` is superfluous and can
be removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: absorb pci230_alloc_private()

`pci230_alloc_private()` is now only called from `pci230_auto_attach()`
to allocate private device storage and initialize various spin-lock
members therein.  Absorb the body of `pci230_alloc_private()` into
`pci230_auto_attach()` itself.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: no need to comedi_set_hw_dev() here

The comedi core module calls `comedi_set_hw_dev()` to associate the
hardware `struct device` with the `struct comedi_device` before it calls
the comedi driver's "auto_attach" hook `pci230_auto_attach()`.  There is
no need for `pci230_auto_attach()` to call `comedi_set_hw_dev()` itself,
so remove the call.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: absorb pci230_attach_common()

`pci230_attach_common()` is now only called from `pci230_auto_attach()`,
so absorb it into that function.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: set detach handler to comedi_pci_detach()

Since the comedi driver's "detach`" handler `pci230_detach()` now merely
calls `comedi_pci_detach()` with the same parameter, use
`comedi_pci_detach()` itself as the "detach" handler.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: no need to manipulate PCI ref count

This driver no longer supports a "legacy" attach mechanism that searches
for a suitable PCI device and increments it's reference count, but since
the common "detach" handler `pci230_detach()` still has a left-over
`pci_dev_put()`, a matching `pci_dev_get()` is needed in the
"auto_attach" handler `pci230_auto_attach()`.  There is no longer any
reason to "get" and "put" the PCI device, so those calls can be removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: remove "legacy" attach mechanism

The "amplc_pci230" driver currently retains the legacy attach mechanism
to allow devices to be attached manually via the `COMEDI_DEVCONFIG`
ioctl.  The only real use for this is to pretend that a PCI230+ or
PCI260+ is a PCI230 or PCI260 for backwards compatibility, as they have
different number of bits of resolution on the AI subdevice.  Since the
card would be automatically configured as a PCI230+ or PCI260+ at PCI
probe time anyway, hopefully any users who want it to appear as a PCI230
or PCI260 would have got tired of removing the automatically configured
device and configuring it manually by now and will have updated their
software to cope with the PCI230+ or PCI260+.

Get rid of the legacy attach mechanism by removing the Comedi driver
"attach" handler `pci230_attach()` and associated code.  Also remove the
"wildcard" entry from the board table `pci230_boards[]` as it is no
longer needed.  Don't bother initializing the `board_name`, `offset`,
and `num_names` members of `struct comedi_driver amplc_pci230_driver`
any longer as they are only needed when configuring the device manually.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: collapse some 'else { if' chains

Where the only thing in an `else { ... }` block is another `if`
statement, collapse it to an `else if {` block where it makes sense to
do so.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: remove some unnecessary parentheses

Remove some pairs of parentheses that don't really improve readability.
Also, reduce the amount of leading whitespace in a few places.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: don't use multiple blank lines

Fix checkpatch issues: "CHECK: Please don't use multiple blank lines".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: update MODULE_DESCRIPTION()

Replace the generic, Comedi low-level driver module description string
with something more specific.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename Hal8188EPwrSeq.h to pwrseq.h

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Hal8188EPwrSeq.h: fix lines over 80 char

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename HalPwrSeqCmd.h to pwrseqcmd.h

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename HalPwrSeqCmd.c to pwrseqcmd.c

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename Hal8188EPwrSeq.c to pwrseq.c

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: HalPwrSeqCmd.h: Remove unnecessary comments.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Hal8188EPwrSeq.c: fix lines over 80 characters.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function HalPwrSeqCmdParsing()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: et131x: et131x.c: sparse warning of incompatible types

fixed sparse warning:   incompatible types in comparison expression
(different address spaces)

wolw and reg both are being used only for the initialization of
the __iomem area.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci1500: miscellaneous cleanup

This patch completes two final matters of cleanup which are each too small
for their own patch.  It corrects a couple of indentation issues and
removes a return statement at the end of a void function.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci1500: clean some whitespace style issues

Now that commented out code has been removed, else statements can move to
the same line as the close brace of the if statement.  Also, a blank line
has been added between declarations and code where needed.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci1500: remove commented out code

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci1500: remove unneeded braces

We don't need braces around single-statement blocks.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci3501: change printk to dev_err

dev_err() is preferred to printk() in device drivers.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: hwdrv_apci035: remove useless return statement

Checkpatch pointed out a void function with a return statement.  It can be
removed.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8723au: Fix return is not a function, parentheses are not required error

Fix checkpatch.pl return is not a function, parentheses are not required error

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: ft1000: Fix return is not a function, parentheses are not required errors

Fix checkpatch.pl return is not a function, parentheses are not required errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use USB_DIR_IN

Replace a magic value with #defined macro.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use generic control packet header

Use generic control packet header structure definition.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: split two assignments into the two assignments on two lines.

split two assignments into the two assignments on two lines.

CC: Lidza Louina <lidza.louina@gmail.com>
CC: Mark Hounschell <markh@compro.net>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Fix sleeping under spinlock bug

This commit changes the memory allocation flags to ATOMIC in order to
avoid sleeping in the nowait/nolock code.

Signed-off-by: Konrad Zapalowicz <bergo.torino+kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: netlogic: Fix checkpatch.pl warning

This patch fixes the following checkpatch.pl warning:

WARNING: Possible unnecessary 'out of memory' message
#116: FILE: ./xlr_net.c:116:
+ if (!skb) {
+ pr_err("SKB allocation failed\n");

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: fix more sparse endianness warnings

Sparse shows a couple of warnings like:

drivers/staging/comedi/drivers/usbduxsigma.c:787:23: warning: cast to restricted __be32

Looking at the indicated lines shows that the issue is caused by an
incorrect cast to uint32_t instead of __be32.  Fix this cast.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: fix more sparse endianness warnings

Sparse shows a couple of warnings like:

drivers/staging/comedi/drivers/usbdux.c:889:20: warning: incorrect type in assignment (different base types)
drivers/staging/comedi/drivers/usbdux.c:889:20:    expected unsigned short [unsigned] [short] [usertype] <noident>
drivers/staging/comedi/drivers/usbdux.c:889:20:    got restricted __le16 [usertype] <noident>

This is the result of a couple of calls to cpu_to_le16() being assigned to
uint16_t typed variables.  Switch the types of these variables/pointers to
__le16 accordingly.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Suggested-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix space prohibited between function name and open parenthesis

This patch fixes the following checkpatch.pl warning in lnet/lnet/lib-eq.c:
WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: declare some functions as static

Declare these functions as static:
llog_alloc_handle() is used in llog_open() only.
llog_free_handle() is used in llog_close() only.

Signed-off-by: Zheng Di <zhengdi05@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: simplify rc initialization

Simplify initialization of rc to take advantage of the fact that it is done
at statement level.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: expand the GOTO macro

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier lbl;
identifier rc;
constant c;
@@

- GOTO(lbl,\(rc\|c\));
+ goto lbl;

@@
identifier lbl;
expression rc;
@@

- GOTO(lbl,rc);
+ rc;
+ goto lbl;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: lustre: Fix 'do not use C99 // comments' errors

Fix checkpatch.pl 'do not use C99 // comments' errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: mdc: mdc_reint: fix coding style issue

Coding style issues, the changes include:
-Remove '{}'

Signed-off-by: Sun Wang <sunwxg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: lustre: Fix return is not a function, parentheses are not required errors

Fix checkpatch.pl return is not a function, parentheses are not required errors

Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: Add an entry for staging/xillybus

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 3.17-rc3 into staging-next

We want the staging bugfixes in this branch as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.17-rc3

Merge tag 'xtensa-20140830' of git://github.com/czankel/xtensa-linux

Pull Xtensa updates from Chris Zankel:
 "Xtensa improvements for 3.17:
   - support highmem on cores with aliasing data cache.  Enable highmem
     on kc705 by default
   - simplify addition of new core variants (no need to modify Kconfig /
     Makefiles)
   - improve robustness of unaligned access handler and its interaction
     with window overflow/underflow exception handlers
   - deprecate atomic and spill registers syscalls
   - clean up Kconfig: remove orphan MATH_EMULATION, sort 'select'
     statements
   - wire up renameat2 syscall.

  Various fixes:
   - fix address checks in dma_{alloc,free}_coherent (runtime BUG)
   - fix access to THREAD_RA/THREAD_SP/THREAD_DS (debug build breakage)
   - fix TLBTEMP_BASE_2 region handling in fast_second_level_miss
     (runtime unrecoverable exception)
   - fix a6 and a7 handling in fast_syscall_xtensa (runtime userspace
     register clobbering)
   - fix kernel/user jump out of fast_unaligned (potential runtime
     unrecoverabl exception)
   - replace termios IOCTL code definitions with constants (userspace
     build breakage)"

* tag 'xtensa-20140830' of git://github.com/czankel/xtensa-linux: (25 commits)
  xtensa: deprecate fast_xtensa and fast_spill_registers syscalls
  xtensa: don't allow overflow/underflow on unaligned stack
  xtensa: fix a6 and a7 handling in fast_syscall_xtensa
  xtensa: allow single-stepping through unaligned load/store
  xtensa: move invalid unaligned instruction handler closer to its users
  xtensa: make fast_unaligned store restartable
  xtensa: add double exception fixup handler for fast_unaligned
  xtensa: fix kernel/user jump out of fast_unaligned
  xtensa: configure kc705 for highmem
  xtensa: support highmem in aliasing cache flushing code
  xtensa: support aliasing cache in kmap
  xtensa: support aliasing cache in k[un]map_atomic
  xtensa: implement clear_user_highpage and copy_user_highpage
  xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss
  xtensa: allow fixmap and kmap span more than one page table
  xtensa: make fixmap region addressing grow with index
  xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS
  xtensa: add renameat2 syscall
  xtensa: fix address checks in dma_{alloc,free}_coherent
  xtensa: replace IOCTL code definitions with constants
  ...

unicore32: Fix build error

unicore32 builds fail with

  arch/unicore32/kernel/signal.c: In function ‘setup_frame’:
  arch/unicore32/kernel/signal.c:257: error: ‘usig’ undeclared (first use in this function)
  arch/unicore32/kernel/signal.c:279: error: ‘usig’ undeclared (first use in this function)
  arch/unicore32/kernel/signal.c: In function ‘handle_signal’:
  arch/unicore32/kernel/signal.c:306: warning: unused variable ‘tsk’
  arch/unicore32/kernel/signal.c: In function ‘do_signal’:
  arch/unicore32/kernel/signal.c:376: error: implicit declaration of function ‘get_signsl’
  make[1]: *** [arch/unicore32/kernel/signal.o] Error 1
  make: *** [arch/unicore32/kernel/signal.o] Error 2

Bisect points to commit 649671c90eaf ("unicore32: Use get_signal()
signal_setup_done()").

This code never even compiled.  Reverting the patch does not work, since
previously used functions no longer exist, so try to fix it up.  Compile
tested only.

Fixes: 649671c90eaf ("unicore32: Use get_signal() signal_setup_done()")
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "Various assorted fixes:

   - a couple of patches from Mark Rutland to resolve an errata with
     Cortex-A15 CPUs.
   - fix cpuidle for the CPU part ID changes in the last merge window
   - add support for a relocation which ARM binutils is generating in
     some circumstances"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8130/1: cpuidle/cpuidle-big_little: fix reading cpu id part number
  ARM: 8129/1: errata: work around Cortex-A15 erratum 830321 using dummy strex
  ARM: 8128/1: abort: don't clear the exclusive monitors
  ARM: 8127/1: module: add support for R_ARM_TARGET1 relocations

Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Here's the weekly batch of fixes from arm-soc.

  The delta is a largeish negative delta, due to revert of SMP support
  for Broadcom's STB SoC -- it was accidentally merged before some
  issues had been addressed, so they will make a new attempt for 3.18.
  I didn't see a need for a full revert of the whole platform due to
  this, we're keeping the rest enabled.

  The rest is mostly:

   - a handful of DT fixes for i.MX (Hummingboard/Cubox-i in particular)
   - some MTD/NAND fixes for OMAP
   - minor DT fixes for shmobile
   - warning fix for UP builds on vexpress/spc

  There's also a couple of patches that wires up hwmod on TI's DRA7 SoC
  so it can boot.  Drivers and the rest had landed for 3.17, and it's
  small and isolated so it made sense to pick up now even if it's not a
  bugfix"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
  vexpress/spc: fix a build warning on array bounds
  ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants
  MAINTAINERS: catch special Rockchip code locations
  ARM: dts: microsom-ar8035: MDIO pad must be set open drain
  ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates
  ARM: brcmstb: revert SMP support
  ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled
  ARM: dts: Enable UART wake-up events for beagleboard
  ARM: dts: Remove twl6030 clk32g "regulator"
  ARM: OMAP2+: omap_device: remove warning that clk alias already exists
  ARM: OMAP: fix %d confusingly prefixed with 0x in format string
  ARM: dts: DRA7: fix interrupt-cells for GPIO
  mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc()
  ARM: dts: omap3430-sdp: Revert to using software ECC for NAND
  ARM: OMAP2+: GPMC: Support Software ECC scheme via DT
  mtd: nand: omap: Revert to using software ECC by default
  ARM: dts: hummingboard/cubox-i: change SPDIF output to be more descriptive
  ARM: dts: hummingboard/cubox-i: add USB OC pinctrl configuration
  ARM: shmobile: r8a7791: add missing 0x0100 for SDCKCR
  ...

staging: dgnc: remove some unused macros

These macros do nothing, so remove it.

CC: Lidza Louina <lidza.louina@gmail.com>
CC: Mark Hounschell <markh@compro.net>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: ptlrpc: Fix space required

This patch fixes the checkpatch.pl issue
Error: Required space after " '+' ',' '=' '(' ' if' "

Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: lib-ptl.c: sparsa warning: symbol not declared

fixed sparse warning of following symbol not declared:
warning: symbol 'lnet_ptl_cleanup' was not declared. Should it be static?
warning: symbol 'lnet_ptl_setup' was not declared. Should it be static?

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function SetBcnCtrlReg()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename rtl8188e_rf6052.c to rf.c

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove file rtl8188e_rf.h

Move macros from rtl8188e_rf.h to rf.h and then remove rtl8188e_rf.h .

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function get_rx_power_val_by_reg()

Rename CamelCase variables.
Remove block of the code which is specific to the bluetooth.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function writeOFDMPowerReg88E()

Rename CamelCase variables and function name.
Remove a block of the code which is executed only if RF type is T2R2 but
rtl8188eu's RF is a T1R1 type, so driver doesn't need that code.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function rtl8188e_PHY_RF6052SetOFDMTxPower()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function getpowerbase88e()

Rename CamelCase variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function rtl8188e_PHY_RF6052SetCckTxPower()

Rename CamelCase variables and function name.
Remove redundant variable TurboScanOff.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function rtl8188e_PHY_RF6052SetBandwidth()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename HalHWImg8188E_MAC.c to mac_cfg.c

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename HalHWImg8188E_RF.c to rf_cfg.c

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename HalHWImg8188E_BB.c to bb_cfg.c

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rename rtl8188e_phycfg.c to phy.c

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function PHY_SwChnl8188E()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function PHY_SetBWMode8188E()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function PHY_SetTxPowerLevel8188E()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_SwChnl8192C()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function _PHY_SetBWMode92C()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_PowerIndexCheck88E()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function getTxPowerIndex88E()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function rtl8188e_PHY_SetRFReg()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function PHY_QueryRFReg()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_RFSerialWrite()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function phy_RFSerialRead()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function PHY_SetBBReg()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused wrapper function rtw_hal_write_bbreg()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Rework function PHY_QueryBBReg()

Rename CamelCase variables and function name.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre:lnet: lib-md.c erase C99 // comments

After changing the comments format, the other error disappears.
So silences two checkpatch errors:
  ERROR: do not use C99 // comments
  ERROR: trailing statements should be on next line

Signed-off-by: Janet Liu <jianhua.ljh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre:lnet: lib-md.c make line not over 80 characters

Reduce the following checkpatch warnings:
  WARNING: line over 80 characters

Signed-off-by: Janet Liu <jianhua.ljh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: fixed a comment coding style issue

Fixed a C99 comment issue in InterfaceMisc.h.

Signed-off-by: Anh Le <anhlq2110@gmail.com>
Reviewed-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vexpress/spc: fix a build warning on array bounds

With ARCH_VEXPRESS_SPC option, kernel build has the following
warning:

arch/arm/mach-vexpress/spc.c: In function ‘ve_spc_clk_init’:
arch/arm/mach-vexpress/spc.c:431:38: warning: array subscript is below array bounds [-Warray-bounds]
  struct ve_spc_opp *opps = info->opps[cluster];
                                      ^
since 'cluster' maybe '-1' in UP system. This patch does a active
checking to fix this issue.

Signed-off-by: Alex Shi <alex.shi@linaro.org>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'for-v3.17-rc/omap-dra72x-d74x-support-a' of git://git./linux/kernel/git/pjw/omap-pending into fixes

Pull "ARM: OMAP2+: DRA72x/DRA74x basic support" from Tony Lindgren:

Add basic subarchitecture support for the DRA72x and DRA74x.  These
are OMAP2+ derivative SoCs.  This should be low-risk to existing OMAP
platforms.

Basic build, boot, and PM test logs are available here:

http://www.pwsan.com/omap/testlogs/hwmod-a-early-v3.17-rc/20140827194314/

* tag 'for-v3.17-rc/omap-dra72x-d74x-support-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
  ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists
  ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'spi-v3.17-rc3-2' of git://git./linux/kernel/git/broonie/spi

Pull spi bugfixes from Mark Brown:
 "A smattering of bug fixes for the SPI subsystem, all in driver code
  which has seen active work recently and none of them with any great
  global impact.

  There's also a new ACPI ID for the pxa2xx driver which required no
  code changes and the addition of kerneldoc for some structure fields
  that were missing it and generating warnings during documentation
  builds as a result"

* tag 'spi-v3.17-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: sh-msiof: Fix transmit-only DMA transfers
  spi/rockchip: Avoid accidentally turning off the clock
  spi: dw: fix kernel crash due to NULL pointer dereference
  spi: dw-pci: fix bug when regs left uninitialized
  spi: davinci: fix SPI_NO_CS functionality
  spi/rockchip: fixup incorrect dma direction setting
  spi/pxa2xx: Add ACPI ID for Intel Braswell
  spi: spi-au1550: fix build failure
  spi: rspi: Fix leaking of unused DMA descriptors
  spi: sh-msiof: Fix leaking of unused DMA descriptors
  spi: Add missing kerneldoc bits
  spi/omap-mcspi: Fix the spi task hangs waiting dma_rx

Merge remote-tracking branch 'spi/fix/sh-msiof' into spi-linus

Merge tag 'spi-v3.17-rc3' into spi-linus

spi: Bug fixes for v3.17

A smattering of bug fixes for the SPI subsystem, all in driver code
which has seen active work recently and none of them with any great
global impact.

There's also a new ACPI ID for the pxa2xx driver which required no code
changes and the addition of kerneldoc for some structure fields that
were missing it and generating warnings during documentation builds as a
result.

# gpg: Signature made Sun 31 Aug 2014 13:19:12 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

spi: sh-msiof: Fix transmit-only DMA transfers

Fix tx/rx mixup, which broke transmit-only transfers.

Introduced by commit 4240305f7cbdc7782aa8bc40cc702775d9ac0839
("spi: sh-msiof: Fix leaking of unused DMA descriptors").

Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge tag 'locks-v3.17-3' of git://git.samba.org/jlayton/linux

Pull file locking bugfx from Jeff Layton:
 "Just a bugfix for a bug that crept in to v3.15.  It's in a rather rare
  error path, and I'm not aware of anyone having hit it, but it's worth
  fixing for v3.17"

* tag 'locks-v3.17-3' of git://git.samba.org/jlayton/linux:
  locks: pass correct "before" pointer to locks_unlink_lock in generic_add_lease

staging: vt6655: Replace typedef enum _CARD_OP_MODE eOPMode with enum nl80211_iftype op_mode.

Using the nl80211 header.

Using enum changes
OP_MODE_ADHOC -> NL80211_IFTYPE_ADHOC
OP_MODE_AP ->  NL80211_IFTYPE_AP
OP_MODE_INFRASTRUCTURE -> NL80211_IFTYPE_STATION
OP_MODE_UNKNOWN -> NL80211_IFTYPE_UNSPECIFIED

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: s_uGetRTSCTSDuration always return __le16

This function should always return __le16, move all endian
correction to here.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stgaing: vt6655: remove unused variable wCTSDuration

wCTSDuration is always set to 0.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef struct tagSCTS_FB with struct vnt_cts_fb

Replacing members
b, wDuration_ba,  wReserved, wCTSDuration_ba_f0, wCTSDuration_ba_f1, data and
reserved2.

With
b, duration_ba, reserved, cts_duration_ba_f0, cts_duration_ba_f1, data and
reserved2

unsigned short is replaced with u16 or __le16 where necessary.

cast void pointer to pvCTS

Creating the new structure in rxtx.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef struct tagSCTS with struct vnt_cts

Replacing members
b, wDuration_ba, wReserved, data and reserved2
with
b, duration_ba, reserved, data and reserved2

unsigned short is replaced with u16 or __le16 where necessary.

cast void pointer to pvCTS

Creating the new structure in rxtx.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef struct tagSRTS_a_FB with struct vnt_rts_a_fb

Replacing members
a, wDuration, wReserved, wRTSDuration_f0, wRTSDuration_f1 and data
with
a, duration, reserved, rts_duration_f0, rts_duration_f1 and data

unsigned short is replaced with u16 or __le16 where necessary.

cast void pointer to pvRTS

Creating the new structure in rxtx.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef struct tagSRTS_ab with struct vnt_rts_ab

Replacing members
ab, wDuration, wReserved and data

with

ab, duration, reserved and data

replacing unsigned short with u16 and __le16 where necessary.

pvRTS is void pointer.

Creating the new structure in rxtx.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef struct tagSRTS_g_FB with struct vnt_rts_g_fb

Replacing members
b, a, wDuration_ba, wDuration_aa, wDuration_bb, wReserved, wRTSDuration_ba_f0,
wRTSDuration_aa_f0, wRTSDuration_ba_f1, wRTSDuration_aa_f1 and data

with

b, a, duration_ba, duration_aa, duration_bb, wReserved, rts_duration_ba_f0,
rts_duration_aa_f0, rts_duration_ba_f1, rts_duration_aa_f1 and data

replacing unsigned short with u16 or __le16 where endian correction is necessary.

Creating the new structure in rxtx.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef struct tagSRTS_g with struct vnt_rts_g

Replacing members
b, a, wDuration_ba, wDuration_aa, wDuration_bb, wReserved and data
with
b, a,duration_ba, duration_aa, duration_bb, reserved and  data

replacing unsigned short with u16 or __le16 where endian correction is necessary.

Creating the new structure in rxtx.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Replace typedef struct tagSCTSData with ieee80211_cts data

ieee80211_cts data needs extra padding with reserved2 set to 0

use IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS to set frame_control

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Replace typedef struct tagSRTSData with ieee80211_rts data

Replacing SRTSData Data with struct ieee80211_rts data

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>