V4L/DVB (10881): radio-aztech: convert to v4l2_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10880): radio-aimslab: convert to v4l2_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10877): saa7134: add analog support for Hauppauge HVR1110r3 boards

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10876): tda18271: add support for AGC configuration via tuner callback

The tda827x driver supports a feature that the tda18271 driver was lacking
until now.  This patch adds support for device-level configuration via the
tuner callback configuration interface.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10874): w9968cf/ovcamchip: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10873): w9968cf: add v4l2_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10871): stv0900: delete debug messages not related to stv0900 tuning algorythm

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10870): v4l2-ioctl: get rid of video_decoder.h

The V4L1 obsoleted header video_decoder.h is not used anymore by any driver. Only
a name decoding function at v4l2-ioctl still implements it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10868): vino: add note that this conversion is untested.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10867): vino: fold i2c-algo-sgi code into vino.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10866): saa7191, indycam: remove compat code.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10865): vino: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10864): vino: introduce v4l2_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10863): saa7191: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10862): indycam: convert to v4l2_subdev

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10861): vino/indycam/saa7191: convert to i2c modules to V4L2.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10860): saa7191: convert to v4l2-i2c-drv-legacy.h

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10859): vino: minor renames

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10858): vino: convert to video_ioctl2.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10856): cx18: Add interlock so sliced VBI insertion only happens for an MPEG PS

The cx18 private packet insertion code only expects to operate on an MPEG PS
when inserting private packets of sliced VBI data.  This patch keeps the cx18
driver from corrupting the MPEG TS or other non-PS stream types, in case the
user enables sliced VBI insertion for these MPEG stream types.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10855): cx18: Fix VPS service register codes

Based on a documentation clarification from Conexant, fix the register code
used for sliced VBI VPS service.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10854): cx18: Correct comments about vertical and horizontal blanking timings

This change only affects comments.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10853): cx18: Fix s-parse warnings and a logic error about extracting the VBI PTS

My s-parse builds never griped about be32_to_cpu() casting to __be32, but Hans'
builds did.  This change explictly declares the pointer into the VBI buffer
header as __be32, which is the correct thing to do as the data is always
big endian when we go to fetch it.  Hopefully this will quiet s-parse warnings.
Also corrected a misplaced parenthesis logic error in checking for the VBI
header magic number.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10852): cx18: Include cx18-audio.h in cx18-audio.c to eliminate s-parse warning

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10851): cx18: Fix a video scaling check problem introduced by sliced VBI changes

Fix a scaling check that was failing, due to a magic number I missed fixing
during previous slice VBI changes.  Now

  $ v4l2-ctl -v width=480,height=480,pixelformat=MPEG

yields proper visual results again.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10850): cx18: Use strlcpy() instead of strncpy() for temp eeprom i2c_client setup

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10848): zoran: Change first argument to zoran_v4l2_buffer_status

It was a struct file *, but all that function wants is the struct zoran_fh
from the file's private data.  Since every caller already has this, just
pass the zoran_fh instead.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10846): dvb/frontends: fix duplicate 'debug' symbol

Fix dvb frontend debug variable to be static, to avoid linker
errors:

drivers/built-in.o:(.data+0xf4b0): multiple definition of `debug'
arch/x86/kernel/built-in.o:(.kprobes.text+0x90): first defined here
ld: Warning: size of symbol `debug' changed from 85 in arch/x86/kernel/built-in.o to 4 in drivers/built-in.o

It would also be Good if arch/x86/kernel/entry_32.S didn't have a
non-static 'debug' symbol.  OTOH, it helps catch things like this one.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10843): saa7146: Clean-up i2c error handling

saa7146: Clean-up i2c error handling

Simplify i2c error handling and fix incorrect handling of
address errors in poll mode.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10842): Adds some missing frontend selects for saa7134 and dvb-usb

Some dvb frontends are required on some boards, but those dependencies
were missed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10840): em28xx-dvb: Remove an unused header

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10838): get rid of the other occurrences of DVB_FE_CUSTOMIZE typo

There are still more places where DVB_FE_CUSTOMIZE is used, instead of
DVB_FE_CUSTOMISE.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10837): Kconfig: only open the customise menu if selected

Instead of asking a lot of questions for the poor users, let's just hide
the frontend customise menu, if the user doesn't want to customise.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10836): Kconfig: replace DVB_FE_CUSTOMIZE to DVB_FE_CUSTOMISE

The name of the option is DVB_FE_CUSTOMISE. However, on a few places, a wrong
name were used, due to a typo (DVB_FE_CUSTOMIZE).

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10835): Kconfig: Add some missing selects for a required frontends

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10833): em28xx: enable Compro VideoMate ForYou sound

Compro VideoMate uses an external audio DSP chip, controlled via tvaudio
module (tda9874a). This patch improves em28xx infrastructure to support
an external audio processor and fixes the Compro VideoMate entry to work
with it.

Signed-off-by: Vitaly Wool <vital@embeddedalley.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10830): dm1105: uses ir_* functions, select VIDEO_IR

dm1105 uses the ir_*() functions, so it needs to select VIDEO_IR
to avoid build errors:

dm1105.c:(.text+0x26b7ac): undefined reference to `ir_input_keydown'
dm1105.c:(.text+0x26b7bc): undefined reference to `ir_input_nokey'
(.devinit.text+0x29982): undefined reference to `ir_codes_dm1105_nec'
(.devinit.text+0x2998a): undefined reference to `ir_input_init'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10829): Support alternate resolutions for sq905

Add support for the alternate resolutions offered by SQ-905 based cameras. As
well as 320x240 all cameras can do 160x120 and some can do 640x480.

Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10827): Add support for GeoVision GV-800(S)

I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips.
It has 16 video inputs and 4 audio inputs, and it is almost identical
to the GV-800, as seen on http://bttv-gallery.de .
The only difference appears to be the analog mux, it has a CD22M3494
in place of the MT8816AP. The card has a blue PCB, as seen in this
picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg .

This card wasn't originally supported, and it was detected as
UNKNOWN/GENERIC. The video inputs weren't working, so I tried
"forcing" a few cards like the GeoVision GV-600, but there was still
no video. So I made a patch to support this card, based on the Kodicom
4400r.

The GV-800(S) is identified as follows:

...
02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)

...
02:00.0 0400: 109e:036e (rev 11)
       Subsystem: 800a:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdfff000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:00.1 0480: 109e:0878 (rev 11)
       Subsystem: 800a:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffe000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:04.0 0400: 109e:036e (rev 11)
       Subsystem: 800b:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffd000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:04.1 0480: 109e:0878 (rev 11)
       Subsystem: 800b:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffc000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:08.0 0400: 109e:036e (rev 11)
       Subsystem: 800c:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffb000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:08.1 0480: 109e:0878 (rev 11)
       Subsystem: 800c:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdffa000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

02:0c.0 0400: 109e:036e (rev 11)
       Subsystem: 800d:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdff9000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2
       Kernel modules: bttv

02:0c.1 0480: 109e:0878 (rev 11)
       Subsystem: 800d:763d
       Flags: bus master, medium devsel, latency 32, IRQ 10
       Memory at cdff8000 (32-bit, prefetchable) [size=4K]
       Capabilities: [44] Vital Product Data <?>
       Capabilities: [4c] Power Management version 2

As you can see, the GV-800(S) card is almost identical to the GV-800
on bttv-gallery, so this patch might also work for that card. If not,
only a few changes should be required on the gv800s_write() function.

After this patch, the video inputs work correctly on linux 2.6.24 and
2.6.27 using the software 'motion'. The input order may seem a little
odd, but it's the order the original software/driver uses, and I decided
to keep that order to get the most out of the card.

I tried to get the audio working with the snd-bt87x module, but I only
get noise from every audio input, even after selecting a different mux
with alsamixer. Also, after trying to play sound from those sources, I
randomly get a RISC error about an invalid RISC opcode, and then that
output stops working. I also can't change the sampling rate when
recording. Any pointers to adding audio support are welcome.

Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10826): cx88: Add IR support to pcHDTV HD3000 & HD5500

cx88: Add IR support to pcHDTV HD3000 & HD5500

Signed-off-by: Erik S. Beiser <erikb@bu.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10825): Add ids for Yuan PD378S DVB adapter

Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Cc: Patrick Boettcher <patrick.boettcher@desy.de>
[mchehab@redhat.com: Fixed a small merge conflict]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10824): Add "Sony PlayTV" to dibcom driver

This patch introduces support for DVB-T for the following dibcom based card:
  Sony PlayTV (USB-ID: 1415:0003)

Signed-off-by: Sebastián Blanes <sebastian.blanes@gmail.com>
Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10823): saa7134: add DVB support for Avermedia A700 cards

Add DVB support for Avermedia DVB-S Pro and
Avermedia DVB-S Hybrid+FM card both labled A700.

They use zl10313 demod (driver mt312) and zl10036 tuner.

[mchehab@redhat.com: change __FUNCTION__ into __func__]
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10822): Add support for Zarlink ZL10036 DVB-S tuner.

This driver is based on initial work by Tino Reichardt and was heavily changed.
The datasheet of the zl10036 can be found here and on other places on the net:

http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf

The zl10038 is similar to the zl10036, so it is maybe possible to write a common
driver of necessary.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10820): meye: Don't need to zero ioctl parameter fields

The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls.  For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.

Zeroing code is removed from querycap, enum_input, enum_fmt_vid_cap, and
g_fmt_vid_cap.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10819): gspca: Don't need to zero ioctl parameter fields

The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls.  For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.

Zeroing code is removed from g_audio, enum_input, g_parm and gmbuf.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10818): usbvision: Don't need to zero ioctl parameter fields

The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls.  For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.

Zeroing code is removed from g_audio, queryctrl, and enum_fmt_vid_cap.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10817): stkwebcam: Don't need to zero ioctl parameter fields

The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls.  For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.

Zeroing code is removed from enum_fmt_vid_cap, g_fmt_vid_cap, and g_parm.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10816): cx88: Don't need to zero ioctl parameter fields

The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls.  For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.

Zeroing code is removed from enum_input and g_tuner.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10815): bttv: Don't need to zero ioctl parameter fields

The v4l2 core code in v4l2_ioctl will zero out the structure the driver is
supposed to fill in for read-only ioctls.  For read/write ioctls, all the
fields which aren't supplied from userspace will be zeroed out.

Zeroing code is removed from enum_input and g_tuner.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10814): saa7146: some small fixes

vidioc_enum_fmt_vid_overlay() did nothing but call
vidioc_enum_fmt_vid_cap(), so just make
saa7146_video_ioctl_ops.vidioc_enum_fmt_vid_overlay point to
vidioc_enum_fmt_vid_cap() and get ride of vidioc_enum_fmt_vid_overlay().

Have gparm use v4l2_video_std_frame_period to fill in the frame period
instead of just assuming PAL.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10813): v4l2: New function v4l2_video_std_frame_period

Some code was calling v4l2_video_std_construct() when all it cared about
was the frame period.  So make a function that just returns that and have
v4l2_video_std_construct() use it.

At this point there are no users of v4l2_video_std_construct() left outside
of v4l2-ioctl, so it could be un-exported and made static.

Change v4l2_video_std_construct() so that it doesn't zero out the struct
v4l2_standard passed in.  It's already been zeroed out in the common ioctl
code.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10812): v4l2: Zero out read-only ioctls in one place

If an ioctl is read-only then the driver fills in all the fields.  Lots of
times drivers only care about some fields so it's best if video_ioctl2
takes care of zeroing out the entire structure before handing it to the
driver.  This saves code in each driver to do it and driver authors often
forget.

The existing memset code in some of the read-only ioctl handlers
can be deleted.

Convert a case statement to a single if statement.

Deleted a debug line from ENUMAUDOUT that was copy-and-pasted to G_AUDOUT
by mistake.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10811): videodev: only copy needed part of RW ioctl's parameter

There are many RW ioctls() in v4l2 where userspace only supplies one or two
of the first fields in the structure passed to the ioctl.  The driver then
fills in the rest of the fields.

Instead of copying the entire structure from userspace to the kernel we
only need to copy those fields that userspace is actually supposed to
supply.

What's more, the fields that are meant to be only be output from the driver
can be zeroed out in the videodev code, in case the driver doesn't fill
them all in.  Many of the ioctl handlers in v4l2_ioctl do this already, but
my patch does this at one common point and so all the memsets for each
ioctl can be deleted.

For VIDIOC_G_SLICED_VBI_CAP, which has one input field ('type') and other
output-only fields, the input field is near the end of the structure
instead of at the beginning.  So there is still a memset in it's ioctl
handler to zero out the beginning of the struct.

There were a couple mistakes with the existing code:
    For VIDIOC_G_AUDIO the index field was preserved, but G_AUDIO is a read
    only ioctl so nothing is copied from userspace to preserve.

    For VIDIOC_G_FREQUENCY the tuner field was not preserved like it should
    have been.  This would be a problem if there was any hardware with more
    than one tuner/modulator.

    For VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS, none of the
    fields were preserved even though each ioctl has several field that are
    supposed to be inputs to the driver!  Obviously these ioctls don't get
    used much.  The index field is needed if the driver has multiple
    discrete sizes/rates and other fields can be used too, e.g. if the size
    depends on pixel format or frame rate depends on image size for
    example.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10808): Fix typo in lnbp21.c

It was a typo in the function
name, it should be lnbh24_attach, and not lnbp24_attach.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10805): Add support for NetUP Dual DVB-S2 CI card

Add support for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10804): Add support for ST STV0900 dual demodulator.

Add last piece of code to support ST STV0900 dual demodulator.
The IC consist of two dependent parts.
It may use single or dual mode.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10803): Add core code for ST STV0900 dual demodulator.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10802): Add more headers for ST STV0900 dual demodulator.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10801): Add headers for ST STV0900 dual demodulator.

The IC consist of two dependent parts.
It may use single or dual mode.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10800): Add support for ST LNBH24 LNB power controller.

The controller consist of two independent parts.
Every part is similar to LNBP21, but has configurable i2c address.
It is used in NetUP Dual DVB-S2 CI card.
http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10799): Add support for ST STV6110 silicon tuner.

The tuner is used in NetUP Dual DVB-S2 CI card.
http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
[mchehab@redhat.com: removed a wrong header: "cx23885.h"]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10798): Add CIMax(R) SP2 Common Interface code for NetUP Dual DVB-S2 CI card

Add CIMax2 Common Interface code for NetUP Dual DVB-S2 CI card.
SmarDTV CIMax(R) SP2 is Dual CableCARD, DVB Common Interface
and OpenCable Hardware Controller.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10797): Add EEPROM code for NetUP Dual DVB-S2 CI card.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10796): Add init code for NetUP Dual DVB-S2 CI card

Add init code for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10794): v4l2: Move code to zero querybuf output struct to v4l2_ioctl

For VIDIOC_QUERYBUF only the first two fields, size and type, are used as
input.  The rest can be filled in by the driver as output.  Most drivers do
not actually use all the field and unused ones should be zeroed out.  Some
drivers have code to do this and some drivers should but don't.  So put
some zero out code in v4l2_ioctl so that all drivers using that system get
it.

The drivers that have zeroing code get that code removed.

Some drivers checked that the type field was valid, but v4l2_ioctl already
does this so those checks can be removed as well.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10792): cx88: remove unnecessary forward declaration of cx88_core

A recent patch added a forward declaration of cx88_core right before the
main definition of that structure, which is obviously unneeded.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10791): videodev: not possible to register NULL video_device

video_register_device_index() checks if it was passed a NULL video_device
pointer (which isn't allowed) _after_ it has already dereferenced it with
video_get_drvdata(vdev).  The checks are clearly pointless and can be
removed, as the function would have crashed before reaching them if vdev
ever was NULL.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10788): gspca - vc032x: Bad matrix for sensor mi1310_soc.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10787): gspca - mars: Bad webcam register values tied to saturation.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10784): mxl5007t: update driver for MxL 5007T V4

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Asaf Fishov <afishov@maxlinear.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10783): mxl5007t: fix devname for hybrid_tuner_request_state

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10782): mxl5007t: warn when unknown revisions are detected

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10781): mxl5007t: mxl5007t_get_status should report if tuner is locked

report TUNER_STATUS_LOCKED if rf_locked or ref_locked

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10780): mxl5007t: remove function mxl5007t_check_rf_input_power

This function does not work properly and is not necessary - remove it for now.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10779): mxl5007t: remove analog tuning code

Analog doesn't work in this driver yet. This code just adds extra bloat,
so remove it for now.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10772): siano: prevent duplicate variable declaration

Fix the following build error:

drivers/media/dvb/siano/smsusb.o: In function `get_order':
include/asm-generic/page.h:10: multiple definition of `sms_dbg'
drivers/media/dvb/siano/sms1xxx.o:include/asm-generic/page.h:10: first defined here
drivers/media/dvb/siano/smsdvb.o: In function `get_order':
include/asm-generic/page.h:10: multiple definition of `sms_dbg'
drivers/media/dvb/siano/sms1xxx.o:include/asm-generic/page.h:10: first defined here

Thanks to Mauro Carvalho Chehab for his original patch to address this issue.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10771): tea575x-tuner: convert it to V4L2 API

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10769): Update dependencies of the modules converted to V4L2

Several modules were converted to V4L2 API. Update their dependencies on Kconfig.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10764): cx18: Disable AC3 controls as the firmware doesn't support AC3

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10763): cx18: Increment version number due to significant changes for v4l2_subdevs

Driver is now at version 1.1.0.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10762): cx18: Get rid of unused variables related to video output

Remove variables that were holdovers from ivtv for supporting the CX23415
MPEG decoder output.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10761): cx18: Change log lines for internal subdevs and fix tveeprom reads

Give messages originating from internal subdevs a header using the subdev's
name.  Fixed an uninitialized variable problem with reading the EEPROM, noticed
from log output.  Got rid of the unused cx18_av_exit() function.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10760): cx18: Fix a memory leak of buffers used for sliced VBI insertion

We leaked buffers every time a device was removed, if the user had enabled
sliced VBI insertion into the MPEG stream.  MythTV uses that.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10759): cx18: Convert GPIO connected functions to act as v4l2_subdevices

Convert GPIO line functions, such a audio routing and device resets, to
v4l2_subdevices.  This essentially completes the conversion of cx18 to the
v4l2_device/v4l2_subdevice framework.  No regression testing has taken place as
of yet.  Also an ivtv legacy bug with GPIO mux routing and going to/from radio
mode was commented, but not fixed.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10758): cx18: Convert I2C devices to v4l2_subdevices

This is a major perturbation to cx18 I2C device handling to convert it to the
v4l2_device/subdeivce framework.  This change breaks GPIO audio multiplexer
control for the time being.  It will be fixed in a coming change.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10757): cx18, v4l2-chip-ident: Finish conversion of AV decoder core to v4l2_subdev

Added a new chip identifer to v4l2-chip-ident for the integrated A/V broadcast
decoder core internal to the CX23418.  Completed separation and encapsulation
of the A/V decoder core interface as a v4l2_subdevice.  The cx18 driver now
compiles and links again.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10756): cx18: Slim down instance handling, build names from v4l2_device.name

Convert card instance handling to a lighter weight mechanism like ivtv.
Also convert name strings and debug messages to use v4l2_device.name.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10755): cx18: Convert the integrated A/V decoder core interface to a v4l2_subdev

This is the next step in converting the cx18 driver to use the v4l2_device/
v4l2_subdevice framework.  This is a straightforward conversion of the
cx18_av_*[ch] files.  It compiles, but leaves the driver in an unlinkable
state at the moment.

Note, the cx18 integrated A/V digitizer will now make a host match at address 1,
as far as v4l2-dbg is concerned.  That means it identifies itself as a separate
"chip", and acts as an alias to the integrated A/V decoder registers that are
also available with the host match at address 0.

Signed-off-by: Andy Walls <awalls@radix.net>
[mchehab@redhat.com: fix merge conflicts due to the removal of v4l2_ctrl_query_fill_std()]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10753): siano: convert EXPORT_SYMBOL to EXPORT_SYMBOL_GPL

As pointed out by Mauro Chehab, we should always use EXPORT_SYMBOL_GPL
instead of EXPORT_SYMBOL wherever possible.

A message was posted to the linux-media mailing list about this, checking
with Uri Shkolnik of Siano Mobile Silicon if this is okay to convert.

As per Uri's response to this email, it is OK for us to make this conversion.

http://www.spinics.net/lists/linux-media/msg02200.html

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10752): sms1xxx: load smsdvb module automatically based on device id

The smsdvb module was separated from the core and usb code. This change loads
smsdvb automatically for driver configurations that depend on it.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10751): sms1xxx: fix checkpatch.pl violations introduced by previous changeset

Fix checkpatch.pl violations introduced by previous changeset:

ERROR: do not use C99 // comments
156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373:
+//#ifdef DVB_CORE

ERROR: do not use C99 // comments
157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374:
+// smsdvb_unregister();

ERROR: do not use C99 // comments
158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375:
+//#endif

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380:
+EXPORT_SYMBOL(smscore_onresponse);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381:
+EXPORT_SYMBOL(sms_get_board);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382:
+EXPORT_SYMBOL(sms_debug);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383:
+EXPORT_SYMBOL(smscore_putbuffer);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384:
+EXPORT_SYMBOL(smscore_registry_getmode);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385:
+EXPORT_SYMBOL(smscore_register_device);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386:
+EXPORT_SYMBOL(smscore_set_board_id);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387:
+EXPORT_SYMBOL(smscore_start_device);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388:
+EXPORT_SYMBOL(smsusb_id_table);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389:
+EXPORT_SYMBOL(smscore_unregister_device);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390:
+EXPORT_SYMBOL(smscore_getbuffer);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391:
+EXPORT_SYMBOL(smscore_get_device_mode);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392:
+EXPORT_SYMBOL(smscore_register_client);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393:
+EXPORT_SYMBOL(smscore_unregister_hotplug);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394:
+EXPORT_SYMBOL(smsclient_sendrequest);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395:
+EXPORT_SYMBOL(smscore_unregister_client);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396:
+EXPORT_SYMBOL(smscore_get_board_id);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397:
+EXPORT_SYMBOL(smscore_register_hotplug);

WARNING: line over 80 characters
391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398:
+extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename);

ERROR: "foo* bar" should be "foo *bar"
391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398:
+extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename);

WARNING: line over 80 characters
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);

ERROR: "foo* bar" should be "foo *bar"
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);

ERROR: space required after that ',' (ctx:VxV)
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);
                                                                             ^

WARNING: __func__ should be used instead of gcc specific __FUNCTION__
489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443:
+ printk(KERN_INFO"%s  Entering status %d.\n", __FUNCTION__, msg.event);

WARNING: __func__ should be used instead of gcc specific __FUNCTION__
501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455:
+ printk(KERN_INFO  "%s  Entering.\n", __FUNCTION__);

ERROR: space prohibited before that '++' (ctx:WxB)
505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459:
+ for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++)
                                                              ^

WARNING: __func__ should be used instead of gcc specific __FUNCTION__
517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471:
+ __FUNCTION__, rc);

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
[mchehab@redhat.com: sms_dbg were declared on 3 different files]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10750): import changes from Siano

Import the following changes from Uri Shkolnik

* Two-ways merge with Siano internal repository
* Continuing with DVB sub-system separation
* kconfig and makefile updates
* Code cleanup

This is a work-in-progress sync with Siano's internal repository.

Some changes had to be altered or dropped in order not to break the build.

This breaks normal operation for the current driver, but it is being committed
now for tracking purposes.

These changes introduce the following checkpatch.pl violations:

ERROR: do not use C99 // comments
156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373:
+//#ifdef DVB_CORE

ERROR: do not use C99 // comments
157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374:
+// smsdvb_unregister();

ERROR: do not use C99 // comments
158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375:
+//#endif

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380:
+EXPORT_SYMBOL(smscore_onresponse);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381:
+EXPORT_SYMBOL(sms_get_board);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382:
+EXPORT_SYMBOL(sms_debug);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383:
+EXPORT_SYMBOL(smscore_putbuffer);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384:
+EXPORT_SYMBOL(smscore_registry_getmode);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385:
+EXPORT_SYMBOL(smscore_register_device);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386:
+EXPORT_SYMBOL(smscore_set_board_id);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387:
+EXPORT_SYMBOL(smscore_start_device);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388:
+EXPORT_SYMBOL(smsusb_id_table);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389:
+EXPORT_SYMBOL(smscore_unregister_device);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390:
+EXPORT_SYMBOL(smscore_getbuffer);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391:
+EXPORT_SYMBOL(smscore_get_device_mode);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392:
+EXPORT_SYMBOL(smscore_register_client);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393:
+EXPORT_SYMBOL(smscore_unregister_hotplug);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394:
+EXPORT_SYMBOL(smsclient_sendrequest);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395:
+EXPORT_SYMBOL(smscore_unregister_client);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396:
+EXPORT_SYMBOL(smscore_get_board_id);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397:
+EXPORT_SYMBOL(smscore_register_hotplug);

WARNING: line over 80 characters
391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398:
+extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename);

ERROR: "foo* bar" should be "foo *bar"
391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398:
+extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename);

WARNING: line over 80 characters
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);

ERROR: "foo* bar" should be "foo *bar"
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);

ERROR: space required after that ',' (ctx:VxV)
392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399:
+extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size);
                                                                             ^

WARNING: __func__ should be used instead of gcc specific __FUNCTION__
489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443:
+ printk(KERN_INFO"%s  Entering status %d.\n", __FUNCTION__, msg.event);

WARNING: __func__ should be used instead of gcc specific __FUNCTION__
501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455:
+ printk(KERN_INFO  "%s  Entering.\n", __FUNCTION__);

ERROR: space prohibited before that '++' (ctx:WxB)
505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459:
+ for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++)
                                                              ^

WARNING: __func__ should be used instead of gcc specific __FUNCTION__
517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471:
+ __FUNCTION__, rc);

total: 7 errors, 23 warnings, 524 lines checked

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10749): sms1xxx: move smsusb_id_table into smsusb.c

Move the usb_device_id table to the smsusb module in preparation for the
sms1xxx module to be split into sub-modules. This will allow the smsusb
driver to start up automatically upon insertion of the USB device.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10748): sms1xxx: restore smsusb_driver.name to smsusb

The sms1xxx driver will be broken down into smaller modules,
so the original name, smsusb, is more appropriate.

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10747): sms1xxx: move definition of struct smsdvb_client_t into smsdvb.c

Nobody uses struct smsdvb_client_t other than smsdvb.c --
this does not need to be inside smscoreapi.h

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10746): sms1xxx: enable rf switch on Hauppauge Tiger devices

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10744): dm1105: infrared remote code is remaked.

The driver infrared remote code part is altered to switch to a work queue.
Also ir_codes table moved to ir-common module for shared access.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10743): dm1105: not demuxing from interrupt context.

The driver already has DMA buffer organized like ringbuffer,
so it is easy to switch to a work queue.
Length of ringbuffer can easily be increased, if someone need it.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (10741): em28xx: Add Kaiser Baas Video to DVD maker support

Added usb vendor/product id for Kaiser Baas Video to DVD maker.
Thanks to Trevor Campbell <tca42186@bigpond.net.au> for providing all data and tests needed to add this card to em28xx driver.

Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>