Wilco Dijkstra [Fri, 17 Jan 2020 13:17:21 +0000 (13:17 +0000)]
[AArch64] Fix shrinkwrapping interactions with atomics (PR92692)
The separate shrinkwrapping pass may insert stores in the middle
of atomics loops which can cause issues on some implementations.
Avoid this by delaying splitting atomics patterns until after
prolog/epilog generation.
gcc/
PR target/92692
* config/aarch64/aarch64.c (aarch64_split_compare_and_swap)
Add assert to ensure prolog has been emitted.
(aarch64_split_atomic_op): Likewise.
* config/aarch64/atomics.md (aarch64_compare_and_swap<mode>)
Use epilogue_completed rather than reload_completed.
(aarch64_atomic_exchange<mode>): Likewise.
(aarch64_atomic_<atomic_optab><mode>): Likewise.
(atomic_nand<mode>): Likewise.
(aarch64_atomic_fetch_<atomic_optab><mode>): Likewise.
(atomic_fetch_nand<mode>): Likewise.
(aarch64_atomic_<atomic_optab>_fetch<mode>): Likewise.
(atomic_nand_fetch<mode>): Likewise.
Richard Sandiford [Fri, 17 Jan 2020 12:22:58 +0000 (12:22 +0000)]
Add PR number to change log
Richard Sandiford [Thu, 16 Jan 2020 19:22:20 +0000 (19:22 +0000)]
aarch64: Don't raise FE_INVALID for -__builtin_isgreater [PR93133]
AIUI, the main purpose of REVERSE_CONDITION is to take advantage of
any integer vs. FP information encoded in the CC mode, particularly
when handling LT, LE, GE and GT. For integer comparisons we can
safely map LT->GE, LE->GT, GE->LT and GT->LE, but for float comparisons
this would usually be invalid without -ffinite-math-only.
The aarch64 definition of REVERSE_CONDITION used
reverse_condition_maybe_unordered for FP comparisons, which had the
effect of converting an unordered-signalling LT, LE, GE or GT into a
quiet UNGE, UNGT, UNLT or UNLE. And it would do the same in reverse:
convert a quiet UN* into an unordered-signalling comparison.
This would be safe in practice (although a little misleading) if we
always used a compare:CCFP or compare:CCFPE to do the comparison and
then used (gt (reg:CCFP/CCFPE CC_REGNUM) (const_int 0)) etc. to test
the result. In that case any signal is raised by the compare and the
choice of quiet vs. signalling relations doesn't matter when testing
the result. The problem is that we also want to use GT directly on
float registers, where any signal is raised by the comparison operation
itself and so must follow the normal rtl rules (GT signalling,
UNLE quiet).
I think the safest fix is to make REVERSIBLE_CC_MODE return false
for FP comparisons. We can then use the default REVERSE_CONDITION
for integer comparisons and the usual conservatively-correct
reversed_comparison_code_parts behaviour for FP comparisons.
Unfortunately reversed_comparison_code_parts doesn't yet handle
-ffinite-math-only, but that's probably GCC 11 material.
A downside is that:
int f (float x, float y) { return !(x < y); }
now generates:
fcmpe s0, s1
cset w0, mi
eor w0, w0, 1
ret
without -ffinite-math-only. Maybe for GCC 11 we should define rtx
codes for all IEEE comparisons, so that we don't have this kind of
representational gap.
Changing REVERSE_CONDITION itself is pretty easy. However, the macro
was also used in the ccmp handling, which relied on being able to
reverse all comparisons. The patch adds new reversed patterns for
cases in which the original condition needs to be kept.
The test is based on gcc.dg/torture/pr91323.c. It might well fail
on other targets that have similar bugs; please XFAIL as appropriate
if you don't want to fix the target for GCC 10.
2020-01-17 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64.h (REVERSIBLE_CC_MODE): Return false
for FP modes.
(REVERSE_CONDITION): Delete.
* config/aarch64/iterators.md (CC_ONLY): New mode iterator.
(CCFP_CCFPE): Likewise.
(e): New mode attribute.
* config/aarch64/aarch64.md (ccmp<GPI:mode>): Rename to...
(@ccmp<CC_ONLY:mode><GPI:mode>): ...this, using CC_ONLY instead of CC.
(fccmp<GPF:mode>, fccmpe<GPF:mode>): Merge into...
(@ccmp<CCFP_CCFPE:mode><GPF:mode>): ...this combined pattern.
(@ccmp<CC_ONLY:mode><GPI:mode>_rev): New pattern.
(@ccmp<CCFP_CCFPE:mode><GPF:mode>_rev): Likewise.
* config/aarch64/aarch64.c (aarch64_gen_compare_reg): Update
name of generator from gen_ccmpdi to gen_ccmpccdi.
(aarch64_gen_ccmp_next): Use code_for_ccmp. If we want to reverse
the previous comparison but aren't able to, use the new ccmp_rev
patterns instead.
Richard Sandiford [Wed, 15 Jan 2020 16:52:18 +0000 (16:52 +0000)]
gimplifier: handle POLY_INT_CST-sized TARGET_EXPRs
If a TARGET_EXPR has poly-int size, the gimplifier would treat it
like a VLA and use gimplify_vla_decl. gimplify_vla_decl in turn
would use an alloca and expect all references to be gimplified
via the DECL_VALUE_EXPR. This caused confusion later in
gimplify_var_or_parm_decl_1 when we (correctly) had direct rather
than indirect references.
For completeness, the patch also fixes similar tests in the RETURN_EXPR
handling and OpenMP depend clauses.
2020-01-17 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* gimplify.c (gimplify_return_expr): Use poly_int_tree_p rather
than testing directly for INTEGER_CST.
(gimplify_target_expr, gimplify_omp_depend): Likewise.
gcc/testsuite/
* g++.target/aarch64/sve/acle/general-c++/gimplify_1.C: New test.
Mark Eggleston [Fri, 17 Jan 2020 08:49:25 +0000 (08:49 +0000)]
PATCH] Fortran: PR93263 -fno-automatic and RECURSIVE
The use of -fno-automatic should not affect the save attribute of a
recursive procedure. The first test case checks unsaved variables
and the second checks saved variables.
Jakub Jelinek [Fri, 17 Jan 2020 08:39:45 +0000 (09:39 +0100)]
vect: Fix ICE in vectorizable_comparison PR93292
The following testcase ICEs on powerpc64le-linux. The problem is that
get_vectype_for_scalar_type returns NULL, and while most places in
tree-vect-stmts.c handle that case, this spot doesn't and punts only
if it is non-NULL, but with different number of elts than expected.
2020-01-17 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/93292
* tree-vect-stmts.c (vectorizable_comparison): Punt also if
get_vectype_for_scalar_type returns NULL.
* g++.dg/opt/pr93292.C: New test.
Jakub Jelinek [Fri, 17 Jan 2020 08:30:17 +0000 (09:30 +0100)]
testsuite: Unbreak compat.exp testing with alt compiler PR93294
2020-01-17 Jakub Jelinek <jakub@redhat.com>
PR testsuite/93294
* lib/c-compat.exp (compat-use-alt-compiler): Handle
-fdiagnostics-urls=never similarly to -fdiagnostics-color=never.
(compat_setup_dfp): Likewise.
Jakub Jelinek [Fri, 17 Jan 2020 08:29:28 +0000 (09:29 +0100)]
ChangeLog fixes.
Hans-Peter Nilsson [Fri, 17 Jan 2020 07:42:32 +0000 (08:42 +0100)]
contrib/gcc_update: Insert "tformat:" for git log --pretty=tformat:%p:%t:%H
Really old git versions (like 1.6.0) require
"git log --pretty=tformat:%p:%t:%H"
or else we see:
Updating GIT tree
Current branch master is up to date.
fatal: invalid --pretty format: %p:%t:%H
Adjusting file timestamps
Touching gcc/config.in...
Touching gcc/config/arm/arm-tune.md...
...and an empty revision in LAST_UPDATED and gcc/REVISION.
In its absence, for newer git versions, "tformat" is the default
qualifier, documented as such default for at least git-2.11.0.
Jason Merrill [Thu, 16 Jan 2020 21:55:39 +0000 (16:55 -0500)]
PR c++/93286 - ICE with __is_constructible and variadic template.
Here we had been recursing in tsubst_copy_and_build if type2 was a TREE_LIST
because that function knew how to deal with pack expansions, and tsubst
didn't. But tsubst_copy_and_build expects to be dealing with expressions,
so we crash when trying to convert_from_reference a type.
* pt.c (tsubst) [TREE_LIST]: Handle pack expansion.
(tsubst_copy_and_build) [TRAIT_EXPR]: Always use tsubst for type2.
GCC Administrator [Fri, 17 Jan 2020 00:16:37 +0000 (00:16 +0000)]
Daily bump.
Jan Hubicka [Thu, 16 Jan 2020 23:50:22 +0000 (00:50 +0100)]
Extern -param=max-predicted-iterations range.
* params.opt (-param=max-predicted-iterations): Increase range from 0.
* predict.c (estimate_loops): Add 1 to param_max_predicted_iterations.
Kerem Kat [Thu, 16 Jan 2020 23:42:11 +0000 (23:42 +0000)]
Fix ICE caused by swallowing a token in c_parser_consume_token
This patch fixes ICE on invalid code, specifically files that have
conflict-marker-like signs before EOF.
PR c/92833
gcc/c/
* c-parser.c (c_parser_consume_token): Fix peeked token stack pop
to support 4 available tokens.
gcc/testsuite/
* c-c++-common/pr92833-1.c, c-c++-common/pr92833-2.c,
c-c++-common/pr92833-3.c, c-c++-common/pr92833-4.c: New tests.
Jan Hubicka [Thu, 16 Jan 2020 22:55:44 +0000 (23:55 +0100)]
Make profile estimation more precise
While analyzing code size regression in SPEC2k GCC binary I noticed that we
perform some inline decisions because we think that number of executions are
very high.
In particular there was inline decision inlining gen_rtx_fmt_ee to find_reloads
believing that it is called 4 billion times. This turned out to be cummulation
of roundoff errors in propagate_freq which was bit mechanically updated from
original sreals to C++ sreals and later to new probabilities.
This led us to estimate that a loopback edge is reached with probability 2.3
which was capped to 1-1/10000 and since this happened in nested loop it quickly
escalated to large values.
Originally capping to REG_BR_PROB_BASE avoided such problems but now we have
much higher range.
This patch avoids going from probabilites to REG_BR_PROB_BASE so precision is
kept. In addition it makes the propagation to not estimate more than
param-max-predicted-loop-iterations. The first change makes the cap to not
be triggered on the gcc build, but it is still better to be safe than sorry.
* ipa-fnsummary.c (estimate_calls_size_and_time): Fix formating of
dump.
* params.opt: (max-predicted-iterations): Set bounds.
* predict.c (real_almost_one, real_br_prob_base,
real_inv_br_prob_base, real_one_half, real_bb_freq_max): Remove.
(propagate_freq): Add max_cyclic_prob parameter; cap cyclic
probabilities; do not truncate to reg_br_prob_bases.
(estimate_loops_at_level): Pass max_cyclic_prob.
(estimate_loops): Compute max_cyclic_prob.
(estimate_bb_frequencies): Do not initialize real_*; update calculation
of back edge prob.
* profile-count.c (profile_probability::to_sreal): New.
* profile-count.h (class sreal): Move up in file.
(profile_probability::to_sreal): Declare.
Jason Merrill [Thu, 16 Jan 2020 15:46:40 +0000 (10:46 -0500)]
PR c++/93280 - ICE with aggregate assignment and DMI.
I recently added an assert to cp-gimplify to catch any
TARGET_EXPR_DIRECT_INIT_P being expanded without a target object, and this
testcase found one. We started out with a TARGET_EXPR around the
CONSTRUCTOR, which would normally mean that the member initializer would be
used to directly initialize the appropriate member of whatever object the
TARGET_EXPR ends up initializing. But then gimplify_modify_expr_rhs
stripped the TARGET_EXPR in order to assign directly from the elements of
the CONSTRUCTOR, leaving no object for the TARGET_EXPR_DIRECT_INIT_P to
initialize. I considered setting CONSTRUCTOR_PLACEHOLDER_BOUNDARY in that
case, which implies TARGET_EXPR_NO_ELIDE, but decided that there's no
particular reason the A initializer needs to initialize a member of a B
rather than a distinct A object, so let's only set TARGET_EXPR_DIRECT_INIT_P
when we're using the DMI in a constructor.
* init.c (get_nsdmi): Set TARGET_EXPR_DIRECT_INIT_P here.
* typeck2.c (digest_nsdmi_init): Not here.
Martin Liska [Thu, 16 Jan 2020 19:44:27 +0000 (20:44 +0100)]
Fix noreorder symbol partitioning reversion.
* lto-partition.c (lto_balanced_map): Remember
best_noreorder_pos and then restore to it
when we revert.
Jonathan Wakely [Fri, 10 Jan 2020 16:01:19 +0000 (16:01 +0000)]
libstdc++: std::ctype fixes for recent versions of NetBSD
This removes support for EOL versions of NetBSD and syncs the
definitions with patches from NetBSD upstream.
The only change here that isn't from upstream is to use _CTYPE_BL for
the isblank class, which is correct but wasn't previously done either in
FSF GCC or the NetBSD packages.
2020-01-16 Kai-Uwe Eckhardt <kuehro@gmx.de>
Matthew Bauer <mjbauer95@gmail.com>
Jonathan Wakely <jwakely@redhat.com>
PR bootstrap/64271 (partial)
* config/os/bsd/netbsd/ctype_base.h (ctype_base::mask): Change type
to unsigned short.
(ctype_base::alpha, ctype_base::digit, ctype_base::xdigit)
(ctype_base::print, ctype_base::graph, ctype_base::alnum): Sync
definitions with NetBSD upstream.
(ctype_base::blank): Use _CTYPE_BL.
* config/os/bsd/netbsd/ctype_configure_char.cc (_C_ctype_): Remove
Declaration.
(ctype<char>::classic_table): Use _C_ctype_tab_ instead of _C_ctype_.
(ctype<char>::do_toupper, ctype<char>::do_tolower): Cast char
parameters to unsigned char.
* config/os/bsd/netbsd/ctype_inline.h (ctype<char>::is): Likewise.
Stam Markianos-Wright [Thu, 16 Jan 2020 15:54:53 +0000 (15:54 +0000)]
[GCC][PATCH][ARM] Add Bfloat16_t scalar type, vector types and machine modes to ARM back-end [2/2]
gcc/ChangeLog:
2020-01-16 Stam Markianos-Wright <stam.markianos-wright@arm.com>
* config/arm/arm.c
(arm_invalid_conversion): New function for target hook.
(arm_invalid_unary_op): New function for target hook.
(arm_invalid_binary_op): New function for target hook.
gcc/testsuite/ChangeLog:
2020-01-16 Stam Markianos-Wright <stam.markianos-wright@arm.com>
* g++.target/arm/bfloat_cpp_typecheck.C: New test.
* gcc.target/arm/bfloat16_scalar_typecheck.c: New test.
* gcc.target/arm/bfloat16_vector_typecheck_1.c: New test.
* gcc.target/arm/bfloat16_vector_typecheck_2.c: New test.
Stam Markianos-Wright [Thu, 16 Jan 2020 15:50:08 +0000 (15:50 +0000)]
[GCC][PATCH][ARM] Add Bfloat16_t scalar type, vector types and machine modes to ARM back-end [1/2]
gcc/ChangeLog:
2020-01-16 Stam Markianos-Wright <stam.markianos-wright@arm.com>
* config.gcc: Add arm_bf16.h.
* config/arm/arm-builtins.c (arm_mangle_builtin_type): Fix comment.
(arm_simd_builtin_std_type): Add BFmode.
(arm_init_simd_builtin_types): Define element types for vector types.
(arm_init_bf16_types): New function.
(arm_init_builtins): Add arm_init_bf16_types function call.
* config/arm/arm-modes.def: Add BFmode and V4BF, V8BF vector modes.
* config/arm/arm-simd-builtin-types.def: Add V4BF, V8BF.
* config/arm/arm.c (aapcs_vfp_sub_candidate): Add BFmode.
(arm_hard_regno_mode_ok): Add BFmode and tidy up statements.
(arm_vector_mode_supported_p): Add V4BF, V8BF.
(arm_mangle_type): Add __bf16.
* config/arm/arm.h: Add V4BF, V8BF to VALID_NEON_DREG_MODE,
VALID_NEON_QREG_MODE respectively. Add export arm_bf16_type_node,
arm_bf16_ptr_type_node.
* config/arm/arm.md: Add BFmode to movhf expand, mov pattern and
define_split between ARM registers.
* config/arm/arm_bf16.h: New file.
* config/arm/arm_neon.h: Add arm_bf16.h and Bfloat vector types.
* config/arm/iterators.md: (ANY64_BF, VDXMOV, VHFBF, HFBF, fporbf): New.
(VQXMOV): Add V8BF.
* config/arm/neon.md: Add BF vector types to movhf NEON move patterns.
* config/arm/vfp.md: Add BFmode to movhf patterns.
gcc/testsuite/ChangeLog:
2020-01-16 Stam Markianos-Wright <stam.markianos-wright@arm.com>
* g++.dg/abi/mangle-neon.C: Add BF16 SIMD types.
* g++.dg/ext/arm-bf16/bf16-mangle-1.C: New test.
* gcc.target/arm/bfloat16_scalar_1_1.c: New test.
* gcc.target/arm/bfloat16_scalar_1_2.c: New test.
* gcc.target/arm/bfloat16_scalar_2_1.c: New test.
* gcc.target/arm/bfloat16_scalar_2_2.c: New test.
* gcc.target/arm/bfloat16_scalar_3_1.c: New test.
* gcc.target/arm/bfloat16_scalar_3_2.c: New test.
* gcc.target/arm/bfloat16_scalar_4.c: New test.
* gcc.target/arm/bfloat16_simd_1_1.c: New test.
* gcc.target/arm/bfloat16_simd_1_2.c: New test.
* gcc.target/arm/bfloat16_simd_2_1.c: New test.
* gcc.target/arm/bfloat16_simd_2_2.c: New test.
* gcc.target/arm/bfloat16_simd_3_1.c: New test.
* gcc.target/arm/bfloat16_simd_3_2.c: New test.
Mihail Ionescu [Wed, 15 Jan 2020 13:25:30 +0000 (13:25 +0000)]
Add CLI and multilib support for Armv8.1-M Mainline MVE extensions
gcc/ChangeLog:
2020-01-16 Mihail Ionescu <mihail.ionescu@arm.com>
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/arm/arm-cpus.in (mve, mve_float): New features.
(dsp, mve, mve.fp): New options.
* config/arm/arm.h (TARGET_HAVE_MVE, TARGET_HAVE_MVE_FLOAT): Define.
* config/arm/t-rmprofile: Map v8.1-M multilibs to v8-M.
* doc/invoke.texi: Document the armv8.1-m mve and dps options.
gcc/testsuite/ChangeLog:
2020-01-16 Mihail Ionescu <mihail.ionescu@arm.com>
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
* testsuite/gcc.target/arm/multilib.exp: Add v8.1-M entries.
Mihail Ionescu [Wed, 15 Jan 2020 11:49:32 +0000 (11:49 +0000)]
[PATCH, GCC/ARM, 10/10] Enable -mcmse
The patch is straightforward: it redefines ARMv8_1m_main as having the
same features as ARMv8m_main (and thus as having the cmse feature) with
the extra features represented by armv8_1m_main. It also removes the
error for using -mcmse on Armv8.1-M Mainline.
*** gcc/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/arm-cpus.in (ARMv8_1m_main): Redefine as an extension to
Armv8-M Mainline.
* config/arm/arm.c (arm_options_perform_arch_sanity_checks): Remove
error for using -mcmse when targeting Armv8.1-M Mainline.
Mihail Ionescu [Wed, 15 Jan 2020 11:45:53 +0000 (11:45 +0000)]
[PATCH, GCC/ARM, 9/10] Call nscall function with blxns
This change to use BLXNS to call a nonsecure function from secure
directly (not using a libcall) is made in 2 steps:
- change nonsecure_call patterns to use blxns instead of calling
__gnu_cmse_nonsecure_call
- loosen requirement for function address to allow any register when
doing BLXNS.
The former is a straightforward check over whether instructions added in
Armv8.1-M Mainline are available while the latter consist in making the
nonsecure call pattern accept any register by using match_operand and
changing the nonsecure_call_internal expander to no force r4 when
targeting Armv8.1-M Mainline.
The tricky bit is actually in the test update, specifically how to check
that register lists for CLRM have all registers except for the one
holding parameters (already done) and the one holding the address used
by BLXNS. This is achieved with 3 scan-assembler directives.
1) The first one lists all registers that can appear in CLRM but make
each of them optional.
Property guaranteed: no wrong register is cleared and none appears
twice in the register list.
2) The second directive check that the CLRM is made of a fixed number
of the right registers to be cleared. The number used is the number
of registers that could contain a secret minus one (used to hold the
address of the function to call.
Property guaranteed: register list has the right number of registers
Cumulated property guaranteed: only registers with a potential secret
are cleared and they are all listed but ont
3) The last directive checks that we cannot find a CLRM with a register
in it that also appears in BLXNS. This is check via the use of a
back-reference on any of the allowed register in CLRM, the
back-reference enforcing that whatever register match in CLRM must be
the same in the BLXNS.
Property guaranteed: register used for BLXNS is different from
registers cleared in CLRM.
Some more care needs to happen for the gcc.target/arm/cmse/cmse-1.c
testcase due to there being two CLRM generated. To ensure the third
directive match the right CLRM to the BLXNS, a negative lookahead is
used between the CLRM register list and the BLXNS. The way negative
lookahead work is by matching the *position* where a given regular
expression does not match. In this case, since it comes after the CLRM
register list it is requesting that what comes after the register list
does not have a CLRM again followed by BLXNS. This guarantees that the
.*blxns after only matches a blxns without another CLRM before.
*** gcc/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/arm.md (nonsecure_call_internal): Do not force memory
address in r4 when targeting Armv8.1-M Mainline.
(nonsecure_call_value_internal): Likewise.
* config/arm/thumb2.md (nonsecure_call_reg_thumb2): Make memory address
a register match_operand again. Emit BLXNS when targeting
Armv8.1-M Mainline.
(nonsecure_call_value_reg_thumb2): Likewise.
*** gcc/testsuite/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* gcc.target/arm/cmse/cmse-1.c: Add check for BLXNS when instructions
introduced in Armv8.1-M Mainline Security Extensions are available and
restrict checks for libcall to __gnu_cmse_nonsecure_call to Armv8-M
targets only. Adapt CLRM check to verify register used for BLXNS is
not in the CLRM register list.
* gcc.target/arm/cmse/cmse-14.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c: Likewise and adapt
check for LSB clearing bit to be using the same register as BLXNS when
targeting Armv8.1-M Mainline.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-and-union.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/union-1.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/union-2.c: Likewise.
* gcc.target/arm/cmse/cmse-15.c: Count BLXNS when targeting Armv8.1-M
Mainline and restrict libcall count to Armv8-M.
Mihail Ionescu [Wed, 15 Jan 2020 11:35:21 +0000 (11:35 +0000)]
[PATCH, GCC/ARM, 8/10] Do lazy store & load inline when calling nscall function
This patch adds two new patterns for the VLSTM and VLLDM instructions.
cmse_nonsecure_call_inline_register_clear is then modified to
generate VLSTM and VLLDM respectively before and after calls to
functions with the cmse_nonsecure_call attribute in order to have lazy
saving, clearing and restoring of VFP registers. Since these
instructions do not do writeback of the base register, the stack is adjusted
prior the lazy store and after the lazy load with appropriate frame
debug notes to describe the effect on the CFA register.
As with CLRM, VSCCLRM and VSTR/VLDR, the instruction is modeled as an
unspecified operation to the memory pointed to by the base register.
*** gcc/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/arm.c (arm_add_cfa_adjust_cfa_note): Declare early.
(cmse_nonsecure_call_inline_register_clear): Define new lazy_fpclear
variable as true when floating-point ABI is not hard. Replace
check against TARGET_HARD_FLOAT_ABI by checks against lazy_fpclear.
Generate VLSTM and VLLDM instruction respectively before and
after a function call to cmse_nonsecure_call function.
* config/arm/unspecs.md (VUNSPEC_VLSTM): Define unspec.
(VUNSPEC_VLLDM): Likewise.
* config/arm/vfp.md (lazy_store_multiple_insn): New define_insn.
(lazy_load_multiple_insn): Likewise.
*** gcc/testsuite/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c: Add check for VLSTM and
VLLDM.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-8.c: Likewise.
Mihail Ionescu [Wed, 15 Jan 2020 11:33:30 +0000 (11:33 +0000)]
[PATCH, GCC/ARM, 7/10] Clear all VFP regs inline in hardfloat nscall functions
The patch is fairly straightforward in its approach and consist of the
following 3 logical changes:
- abstract the number of floating-point register to clear in
max_fp_regno
- use max_fp_regno to decide how many registers to clear so that the
same code works for Armv8-M and Armv8.1-M Mainline
- emit vpush and vpop instruction respectively before and after a
nonsecure call
Note that as in the patch to clear GPRs inline, debug information has to
be disabled for VPUSH and VPOP due to VPOP adding CFA adjustment note
for SP when R7 is sometimes used as CFA.
ChangeLog entries are as follows:
*** gcc/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/arm.c (vfp_emit_fstmd): Declare early.
(arm_emit_vfp_multi_reg_pop): Likewise.
(cmse_nonsecure_call_inline_register_clear): Abstract number of VFP
registers to clear in max_fp_regno. Emit VPUSH and VPOP to save and
restore callee-saved VFP registers.
*** gcc/testsuite/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c: Add check for
VPUSH and VPOP and update expectation for VSCCLRM.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c: Likewise.
Mihail Ionescu [Wed, 15 Jan 2020 11:31:35 +0000 (11:31 +0000)]
[PATCH, GCC/ARM, 6/10] Clear GPRs inline when calling nscall function
Besides changing the set of registers that needs to be cleared inline,
this patch also generates the push and pop to save and restore
callee-saved registers without trusting the callee inline. To make the
code more future-proof, this (currently) Armv8.1-M specific behavior is
expressed in terms of clearing of callee-saved registers rather than
directly based on the targets.
The patch contains 1 subtlety:
Debug information is disabled for push and pop because the
REG_CFA_RESTORE notes used to describe popping of registers do not stack.
Instead, they just reset the debug state for the register to the one at
the beginning of the function, which is incorrect for a register that is
pushed twice (in prologue and before nonsecure call) and then popped for
the first time. In particular, this occasionally trips CFI note creation
code when there are two codepaths to the epilogue, one of which does not
go through the nonsecure call. Obviously this mean that debugging
between the push and pop is not reliable.
*** gcc/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/arm.c (arm_emit_multi_reg_pop): Declare early.
(cmse_nonsecure_call_clear_caller_saved): Rename into ...
(cmse_nonsecure_call_inline_register_clear): This. Save and clear
callee-saved GPRs as well as clear ip register before doing a nonsecure
call then restore callee-saved GPRs after it when targeting
Armv8.1-M Mainline.
(arm_reorg): Adapt to function rename.
*** gcc/testsuite/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* gcc.target/arm/cmse/cmse-1.c: Add check for PUSH and POP and update
CLRM check.
* gcc.target/arm/cmse/cmse-14.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-and-union.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft-sp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/union-1.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/union-2.c: Likewise.
Mihail Ionescu [Wed, 15 Jan 2020 11:29:42 +0000 (11:29 +0000)]
[PATCH, GCC/ARM, 5/10] Clear VFP registers with VSCCLRM
This patch adds a new pattern for the VSCCLRM instruction.
cmse_clear_registers () is then modified to use the new VSCCLRM
instruction when targeting Armv8.1-M Mainline, thus, making the Armv8-M
register clearing code specific to Armv8-M.
Since the VSCCLRM instruction mandates VPR in the register list, the
pattern is encoded with a parallel which only requires an unspecified
VUNSPEC_CLRM_VPR constant modelling the APSR clearing. Other expression
in the parallel are expected to be set expression for clearing the VFP
registers.
*** gcc/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/arm-protos.h (clear_operation_p): Adapt prototype.
* config/arm/arm.c (clear_operation_p): Extend to be able to check a
clear_vfp_multiple pattern based on a new vfp parameter.
(cmse_clear_registers): Generate VSCCLRM to clear VFP registers when
targeting Armv8.1-M Mainline.
(cmse_nonsecure_entry_clear_before_return): Clear VFP registers
unconditionally when targeting Armv8.1-M Mainline architecture. Check
whether VFP registers are available before looking call_used_regs for a
VFP register.
* config/arm/predicates.md (clear_multiple_operation): Adapt to change
of prototype of clear_operation_p.
(clear_vfp_multiple_operation): New predicate.
* config/arm/unspecs.md (VUNSPEC_VSCCLRM_VPR): New volatile unspec.
* config/arm/vfp.md (clear_vfp_multiple): New define_insn.
*** gcc/testsuite/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* gcc.target/arm/cmse/bitfield-1.c: Add check for VSCCLRM.
* gcc.target/arm/cmse/bitfield-2.c: Likewise.
* gcc.target/arm/cmse/bitfield-3.c: Likewise.
* gcc.target/arm/cmse/cmse-1.c: Likewise.
* gcc.target/arm/cmse/struct-1.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-5.c: Likewise.
Mihail Ionescu [Wed, 15 Jan 2020 10:38:44 +0000 (10:38 +0000)]
[PATCH, GCC/ARM, 4/10] Clear GPR with CLRM
This patch adds a new pattern for the CLRM instruction and guards the
current clearing code in output_return_instruction() and thumb_exit()
on Armv8.1-M Mainline instructions not being present.
cmse_clear_registers () is then modified to use the new CLRM instruction
when targeting Armv8.1-M Mainline while keeping Armv8-M register
clearing code for VFP registers.
For the CLRM instruction, which does not mandated APSR in the register
list, checking whether it is the right volatile unspec or a clearing
register is done in clear_operation_p.
Note that load/store multiple were deemed sufficiently different in
terms of RTX structure compared to the CLRM pattern for a different
function to be used to validate the match_parallel.
ChangeLog entries are as follows:
*** gcc/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/arm-protos.h (clear_operation_p): Declare.
* config/arm/arm.c (clear_operation_p): New function.
(cmse_clear_registers): Generate clear_multiple instruction pattern if
targeting Armv8.1-M Mainline or successor.
(output_return_instruction): Only output APSR register clearing if
Armv8.1-M Mainline instructions not available.
(thumb_exit): Likewise.
* config/arm/predicates.md (clear_multiple_operation): New predicate.
* config/arm/thumb2.md (clear_apsr): New define_insn.
(clear_multiple): Likewise.
* config/arm/unspecs.md (VUNSPEC_CLRM_APSR): New volatile unspec.
*** gcc/testsuite/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* gcc.target/arm/cmse/bitfield-1.c: Add check for CLRM.
* gcc.target/arm/cmse/bitfield-2.c: Likewise.
* gcc.target/arm/cmse/bitfield-3.c: Likewise.
* gcc.target/arm/cmse/struct-1.c: Likewise.
* gcc.target/arm/cmse/cmse-14.c: Likewise.
* gcc.target/arm/cmse/cmse-1.c: Likewise. Restrict checks for Armv8-M
GPR clearing when CLRM is not available.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-5.c: likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c: likewise.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c: likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-5.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/union-1.c: Likewise.
* gcc.target/arm/cmse/mainline/8_1m/union-2.c: Likewise.
Mihail Ionescu [Wed, 15 Jan 2020 10:33:52 +0000 (10:33 +0000)]
[PATCH, GCC/ARM, 3/10] Save/restore FPCXTNS in nsentry functions
This patch consists mainly of creating 2 new instruction patterns to
push and pop special FP registers via vldm and vstr and using them in
prologue and epilogue. The patterns are defined as push/pop with an
unspecified operation on the memory accessed, with an unspecified
constant indicating what special FP register is being saved/restored.
Other aspects of the patch include:
* defining the set of special registers that can be saved/restored and
their name
* reserving space in the stack frames for these push/pop
* preventing return via pop
* guarding the clearing of FPSCR to target architecture not having
Armv8.1-M Mainline instructions.
*** gcc/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/arm.c (fp_sysreg_names): Declare and define.
(use_return_insn): Also return false for Armv8.1-M Mainline.
(output_return_instruction): Skip FPSCR clearing if Armv8.1-M
Mainline instructions are available.
(arm_compute_frame_layout): Allocate space in frame for FPCXTNS
when targeting Armv8.1-M Mainline Security Extensions.
(arm_expand_prologue): Save FPCXTNS if this is an Armv8.1-M
Mainline entry function.
(cmse_nonsecure_entry_clear_before_return): Clear IP and r4 if
targeting Armv8.1-M Mainline or successor.
(arm_expand_epilogue): Fix indentation of caller-saved register
clearing. Restore FPCXTNS if this is an Armv8.1-M Mainline
entry function.
* config/arm/arm.h (TARGET_HAVE_FP_CMSE): New macro.
(FP_SYSREGS): Likewise.
(enum vfp_sysregs_encoding): Define enum.
(fp_sysreg_names): Declare.
* config/arm/unspecs.md (VUNSPEC_VSTR_VLDR): New volatile unspec.
* config/arm/vfp.md (push_fpsysreg_insn): New define_insn.
(pop_fpsysreg_insn): Likewise.
*** gcc/testsuite/Changelog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* gcc.target/arm/cmse/bitfield-1.c: add checks for VSTR and VLDR.
* gcc.target/arm/cmse/bitfield-2.c: Likewise.
* gcc.target/arm/cmse/bitfield-3.c: Likewise.
* gcc.target/arm/cmse/cmse-1.c: Likewise.
* gcc.target/arm/cmse/struct-1.c: Likewise.
* gcc.target/arm/cmse/cmse.exp: Run existing Armv8-M Mainline tests
from mainline/8m subdirectory and new Armv8.1-M Mainline tests from
mainline/8_1m subdirectory.
* gcc.target/arm/cmse/mainline/bitfield-4.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/bitfield-4.c: This.
* gcc.target/arm/cmse/mainline/bitfield-5.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/bitfield-5.c: This.
* gcc.target/arm/cmse/mainline/bitfield-6.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/bitfield-6.c: This.
* gcc.target/arm/cmse/mainline/bitfield-7.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/bitfield-7.c: This.
* gcc.target/arm/cmse/mainline/bitfield-8.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/bitfield-8.c: This.
* gcc.target/arm/cmse/mainline/bitfield-9.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/bitfield-9.c: This.
* gcc.target/arm/cmse/mainline/bitfield-and-union-1.c: Move and rename
into ...
* gcc.target/arm/cmse/mainline/8m/bitfield-and-union.c: This.
* gcc.target/arm/cmse/mainline/hard-sp/cmse-13.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/hard-sp/cmse-13.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/hard-sp/cmse-5.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/hard-sp/cmse-5.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/hard-sp/cmse-7.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/hard-sp/cmse-7.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/hard-sp/cmse-8.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/hard-sp/cmse-8.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/hard/cmse-13.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/hard/cmse-13.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/hard/cmse-5.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/hard/cmse-5.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/hard/cmse-7.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/hard/cmse-7.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/hard/cmse-8.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/hard/cmse-8.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/soft/cmse-13.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/soft/cmse-13.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/soft/cmse-5.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/soft/cmse-5.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/soft/cmse-7.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/soft/cmse-7.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/soft/cmse-8.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/soft/cmse-8.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/softfp-sp/cmse-5.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/softfp-sp/cmse-5.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/softfp-sp/cmse-7.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/softfp-sp/cmse-7.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/softfp-sp/cmse-8.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/softfp-sp/cmse-8.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/softfp/cmse-13.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/softfp/cmse-13.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/softfp/cmse-5.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/softfp/cmse-5.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/softfp/cmse-7.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/softfp/cmse-7.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/softfp/cmse-8.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/softfp/cmse-8.c: This. Clean up
dg-skip-if directive for float ABI.
* gcc.target/arm/cmse/mainline/union-1.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/union-1.c: This.
* gcc.target/arm/cmse/mainline/union-2.c: Move into ...
* gcc.target/arm/cmse/mainline/8m/union-2.c: This.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-4.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-5.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-6.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-7.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-8.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-9.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/bitfield-and-union.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-13.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-5.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-7.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/hard-sp/cmse-8.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-13.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-5.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-7.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/hard/cmse-8.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-13.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-5.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-7.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/soft/cmse-8.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-5.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-7.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/softfp-sp/cmse-8.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-13.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-5.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-7.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/softfp/cmse-8.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/union-1.c: New file.
* gcc.target/arm/cmse/mainline/8_1m/union-2.c: New file.
* lib/target-supports.exp (check_effective_target_arm_cmse_clear_ok):
New procedure.
Mihail Ionescu [Tue, 14 Jan 2020 18:00:35 +0000 (18:00 +0000)]
[PATCH, GCC/ARM, 2/10] Add command line support for Armv8.1-M Mainline
Besides the expected enabling of the new value for the -march
command-line option (-march=armv8.1-m.main) and its extensions (see
below), this patch disables support of the Security Extensions for this
newly added architecture. This is done both by not including the cmse
bit in the architecture description and by throwing an error message
when user request Armv8.1-M Mainline Security Extensions. Note that
Armv8-M Baseline and Mainline Security Extensions are still enabled.
Only extensions for already supported instructions are implemented in
this patch. Other extensions (MVE integer and float) will be added in
separate patches. The following configurations are allowed for Armv8.1-M
Mainline with regards to FPU and implemented in this patch:
+ no FPU (+nofp)
+ single precision VFPv5 with FP16 (+fp)
+ double precision VFPv5 with FP16 (+fp.dp)
ChangeLog entry are as follow:
*** gcc/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/arm-cpus.in (armv8_1m_main): New feature.
(ARMv4, ARMv4t, ARMv5t, ARMv5te, ARMv5tej, ARMv6, ARMv6j, ARMv6k,
ARMv6z, ARMv6kz, ARMv6zk, ARMv6t2, ARMv6m, ARMv7, ARMv7a, ARMv7ve,
ARMv7r, ARMv7m, ARMv7em, ARMv8a, ARMv8_1a, ARMv8_2a, ARMv8_3a,
ARMv8_4a, ARMv8_5a, ARMv8m_base, ARMv8m_main, ARMv8r): Reindent.
(ARMv8_1m_main): New feature group.
(armv8.1-m.main): New architecture.
* config/arm/arm-tables.opt: Regenerate.
* config/arm/arm.c (arm_arch8_1m_main): Define and default initialize.
(arm_option_reconfigure_globals): Initialize arm_arch8_1m_main.
(arm_options_perform_arch_sanity_checks): Error out when targeting
Armv8.1-M Mainline Security Extensions.
* config/arm/arm.h (arm_arch8_1m_main): Declare.
*** gcc/testsuite/ChangeLog ***
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* lib/target-supports.exp
(check_effective_target_arm_arch_v8_1m_main_ok): Define.
(add_options_for_arm_arch_v8_1m_main): Likewise.
(check_effective_target_arm_arch_v8_1m_main_multilib): Likewise.
Mihail Ionescu [Tue, 14 Jan 2020 17:47:39 +0000 (17:47 +0000)]
[PATCH, GCC/ARM, 1/10] Fix -mcmse check in libgcc
This patch is part of a patch series to add support for Armv8.1-M
Mainline Security Extensions architecture.
Code to detect whether cmse.c can be buit with -mcmse checks the output
of host GCC when invoked with -mcmse. However, an error from the
compiler does not prevent some minimal output so this always holds true.
2020-01-16 Mihail-Calin Ionescu <mihail.ionescu@arm.com>
2020-01-16 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/arm/t-arm: Check return value of gcc rather than lack of
output.
Andreas Schwab [Thu, 16 Jan 2020 15:00:33 +0000 (16:00 +0100)]
gcc-git-customization.sh: Avoid double expansion
Andreas Schwab [Thu, 16 Jan 2020 14:26:31 +0000 (15:26 +0100)]
gcc-git-customization.sh: avoid double expansion
Stam Markianos-Wright [Thu, 16 Jan 2020 14:47:30 +0000 (14:47 +0000)]
[GCC][PATCH][AArch64]Add ACLE intrinsics for bfdot for ARMv8.6 Extension
2020-01-16 Stam Markianos-Wright <stam.markianos-wright@arm.com>
* config/aarch64/aarch64-simd-builtins.def (aarch64_bfdot,
aarch64_bfdot_lane, aarch64_bfdot_laneq): New.
* config/aarch64/aarch64-simd.md (aarch64_bfdot, aarch64_bfdot_lane,
aarch64_bfdot_laneq): New.
* config/aarch64/arm_bf16.h (vbfdot_f32, vbfdotq_f32,
vbfdot_lane_f32, vbfdotq_lane_f32, vbfdot_laneq_f32,
vbfdotq_laneq_f32): New.
* config/aarch64/iterators.md (UNSPEC_BFDOT, Vbfdottype,
VBFMLA_W, VBF): New.
(isquadop): Add V4BF, V8BF.
2020-01-16 Stam Markianos-Wright <stam.markianos-wright@arm.com>
* gcc.target/aarch64/advsimd-intrinsics/bfdot-1.c: New.
* gcc.target/aarch64/advsimd-intrinsics/bfdot-2.c: New.
* gcc.target/aarch64/advsimd-intrinsics/bfdot-3.c: New.
François Dumont [Thu, 16 Jan 2020 08:34:21 +0000 (08:34 +0000)]
libstdc++: Improve unordered containers == operator (PR 91263)
Avoid comparing elements with operator== multiple times by replacing
uses of find and equal_range with equivalent inlined code that uses
operator== instead of the container's equality comparison predicate.
This is valid because the standard requires that operator== is a
refinement of the equality predicate.
Also replace the _S_is_permutation function with std::is_permutation,
which wasn't yet implemented when this code was first written.
PR libstdc++/91263
* include/bits/hashtable.h (_Hashtable<>): Make _Equality<> friend.
* include/bits/hashtable_policy.h: Include <bits/stl_algo.h>.
(_Equality_base): Remove.
(_Equality<>::_M_equal): Review implementation. Use
std::is_permutation.
* testsuite/23_containers/unordered_multiset/operators/1.cc
(Hash, Equal, test02, test03): New.
* testsuite/23_containers/unordered_set/operators/1.cc
(Hash, Equal, test02, test03): New.
Stam Markianos-Wright [Thu, 16 Jan 2020 14:20:48 +0000 (14:20 +0000)]
[GCC][PATCH][AArch64]Add ACLE intrinsics for dot product (usdot - vector, <us/su>dot - by element) for AArch64 AdvSIMD ARMv8.6 Extension
gcc/ChangeLog:
2020-01-16 Stam Markianos-Wright <stam.markianos-wright@arm.com>
* config/aarch64/aarch64-builtins.c: (enum aarch64_type_qualifiers):
New qualifier_lane_quadtup_index, TYPES_TERNOP_SSUS,
TYPES_QUADOPSSUS_LANE_QUADTUP, TYPES_QUADOPSSSU_LANE_QUADTUP.
(aarch64_simd_expand_args): Add case SIMD_ARG_LANE_QUADTUP_INDEX.
(aarch64_simd_expand_builtin): Add qualifier_lane_quadtup_index.
* config/aarch64/aarch64-simd-builtins.def (usdot, usdot_lane,
usdot_laneq, sudot_lane,sudot_laneq): New.
* config/aarch64/aarch64-simd.md (aarch64_usdot): New.
(aarch64_<sur>dot_lane): New.
* config/aarch64/arm_neon.h (vusdot_s32): New.
(vusdotq_s32): New.
(vusdot_lane_s32): New.
(vsudot_lane_s32): New.
* config/aarch64/iterators.md (DOTPROD_I8MM): New iterator.
(UNSPEC_USDOT, UNSPEC_SUDOT): New unspecs.
gcc/testsuite/ChangeLog:
2020-01-16 Stam Markianos-Wright <stam.markianos-wright@arm.com>
* gcc.target/aarch64/advsimd-intrinsics/vdot-compile-3-1.c: New test.
* gcc.target/aarch64/advsimd-intrinsics/vdot-compile-3-2.c: New test.
* gcc.target/aarch64/advsimd-intrinsics/vdot-compile-3-3.c: New test.
* gcc.target/aarch64/advsimd-intrinsics/vdot-compile-3-4.c: New test.
Richard Earnshaw [Thu, 16 Jan 2020 13:48:37 +0000 (13:48 +0000)]
contrib: Check and if needed set user.name and user.email in gcc-git-customization.sh
As discussed on IRC, this adds a couple more checks in the
customization setup for git. If the variables user.name and
user.email are not set anywhere in the git config hierarchy, we set
some local values. We always ask about the values we detect and if
the user gives an answer that is new, we save that in the local
config: this gives the opportunity to use different values to those
configured for the global space.
Also cleaned up a couple of minor niggles, such as using $(cmd) rather
than `cmd` for subshells and some quoting issues when using eval.
* gcc-git-customization.sh: Check that user.name and user.email
are set. Use $(cmd) instead of `cmd`. Fix variable quoting when
using eval.
Martin Liska [Thu, 16 Jan 2020 13:33:08 +0000 (14:33 +0100)]
Fix spacing in a dump in value-prof.c.
* value-prof.c (dump_histogram_value): Fix
obvious spacing issue.
Andrew Pinski [Thu, 16 Jan 2020 07:54:51 +0000 (07:54 +0000)]
Fix value numbering dealing with reverse byte order
Hi,
While working on bit-field lowering pass, I came across this bug.
The IR looks like:
VIEW_CONVERT_EXPR<unsigned long>(var1) = _12;
_1 = BIT_FIELD_REF <var1, 64, 0>;
Where the BIT_FIELD_REF has REF_REVERSE_STORAGE_ORDER set on it
and var1's type has TYPE_REVERSE_STORAGE_ORDER set on it.
PRE/FRE would decided to prop _12 into the BFR statement
which would produce wrong code.
And yes _12 has the correct byte order already; bit-field lowering
removes the implicit byte swaps in the IR and adds the explicity
to make it easier optimize later on.
This patch adds a check for storage_order_barrier_p on the lhs tree
which returns true in the case where we had a reverse order with a VCE.
ChangeLog:
* tree-ssa-sccvn.c(vn_reference_lookup_3): Check lhs for
!storage_order_barrier_p.
Andrew Pinski [Thu, 16 Jan 2020 02:07:28 +0000 (02:07 +0000)]
Uninitialized padding in struct _dep.
In struct _dep, there is an implicit padding of 4bits. This
bit-field padding is uninitialized when init_dep_1 is being called.
This means we access uninitialized memory but never use it for
anything. Adding an unused bit-field field and initializing it
in init_dep_1 will improve code generation also as we initialize
the whole 32bits now rather than just part of it.
ChangeLog:
* sched-int.h (_dep): Add unused bit-field field for the padding.
* sched-deps.c (init_dep_1): Init unused field.
Andrew Pinski [Thu, 16 Jan 2020 01:52:12 +0000 (01:52 +0000)]
Fix uninitialized field in expand_operand.
Commit g:
f96bf49a0 added the target field to expand_operand.
But it leaves it uninitialized when doing a full initialization
inside create_expand_operand. This fixes the problem and improves
the code generation inside create_expand_operand too.
ChangeLog:
* optabs.h (create_expand_operand): Initialize target field also.
Jakub Jelinek [Thu, 16 Jan 2020 11:32:34 +0000 (12:32 +0100)]
contrib: Verify the id to be printed is ancestor of the corresponding remote release branch (or master), otherwise print nothing.
The monotonically increasing revision ids need to be globally unique, so they should
only identify commits that were committed to the upstream repo to its master or
releases/gcc-N branches. The alias could print something even for private branches
or vendor branches etc., but if such an identifier is then used publicly, it will
refer to something else.
2020-01-16 Jakub Jelinek <jakub@redhat.com>
* gcc-git-customization.sh: Verify the id to be printed is ancestor of
the corresponding remote release branch (or master), otherwise print
nothing.
Andre Vieira [Thu, 16 Jan 2020 10:28:02 +0000 (10:28 +0000)]
PR tree-optimization/92429 do not fold when updating epilogue statements
This patch addresses the problem reported in PR92429. When creating an
epilogue for vectorization we have to replace the SSA_NAMEs in the
PATTERN_DEF_SEQs and RELATED_STMTs of the epilogue's loop_vec_infos. When doing
this we were using simplify_replace_tree which always folds the replacement.
This may lead to a different tree-node than the one which was analyzed in
vect_loop_analyze. In turn the new tree-node may require a different
vectorization than the one we had prepared for which caused the ICE in
question.
gcc/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR tree-optimization/92429
* tree-ssa-loop-niter.h (simplify_replace_tree): Add parameter.
* tree-ssa-loop-niter.c (simplify_replace_tree): Add parameter to
control folding.
* tree-vect-loop.c (update_epilogue_vinfo): Do not fold when replacing
tree.
gcc/testsuite/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR tree-optimization/92429
* gcc.dg/vect/pr92429.c: New test.
Andreas Krebbel [Thu, 16 Jan 2020 09:41:44 +0000 (10:41 +0100)]
Work around array out of bounds warning in mkdeps
This suppresses an array out of bounds warning in mkdeps.c as proposed
by Martin Sebor in the bugzilla.
array subscript 2 is outside array bounds of ‘const char [2]’
Since this warning does occur during bootstrap it currently breaks
werror builds on IBM Z.
The problem can be reproduced also on x86_64 by changing the inlining
threshold using: --param max-inline-insns-auto=80
Bootstrapped and regression tested on x86_64 and IBM Z.
libcpp/ChangeLog:
2020-01-16 Andreas Krebbel <krebbel@linux.ibm.com>
PR tree-optimization/92176
* mkdeps.c (deps_add_default_target): Avoid calling apply_vpath to
suppress an array out of bounds warning.
Richard Sandiford [Wed, 15 Jan 2020 16:52:04 +0000 (16:52 +0000)]
aarch64: Fix BE SVE mode punning involving floats
The patterns used by aarch64_split_sve_subreg_move only support
integer modes, so if the widest mode is a float, we should get
its integer equivalent.
Fixes gcc.target/aarch64/sel_3.c for big-endian targets.
2020-01-16 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64.c (aarch64_split_sve_subreg_move): Apply
aarch64_sve_int_mode to each mode.
Tobias Burnus [Thu, 16 Jan 2020 07:50:57 +0000 (08:50 +0100)]
PR93253 – Document BOZ changes, make it friendlier in legacy code
PR fortran/93253
* check.c (gfc_invalid_boz): Mention -fallow-invalid-boz
in the error message.
* gfortran.texi (BOZ literal constants): List another missing
extension and refer to -fallow-invalid-boz.
* lang.opt (fallow-invalid-boz): Also mention 'X' in the help text
as it is not covered by the previous wording.
* primary.c (match_boz_constant): Tweak wording such that it is
clear how to fix the nonstandard use.
PR fortran/93253
* fortran.dg/boz_7.f90: Updated dg-error.
GCC Administrator [Thu, 16 Jan 2020 00:16:32 +0000 (00:16 +0000)]
Daily bump.
David Malcolm [Wed, 15 Jan 2020 21:04:04 +0000 (16:04 -0500)]
analyzer: add note about -fdump-ipa-analyzer to internal docs
gcc/ChangeLog:
* doc/analyzer.texi (Overview): Add note about
-fdump-ipa-analyzer.
David Malcolm [Wed, 15 Jan 2020 15:31:36 +0000 (10:31 -0500)]
analyzer: fix comment
I rewrote class impl_region_model_context to avoid using multiple
inheritance during patch review but forgot to update this comment.
Fix it.
gcc/analyzer/ChangeLog:
* engine.cc (class impl_region_model_context): Fix comment.
Paolo Carlini [Wed, 15 Jan 2020 21:28:46 +0000 (22:28 +0100)]
Fix "PR c++/91073 if constexpr no longer works directly with Concepts."
This is a rather serious regression, filed in July 2019. Luckily the
fix is simple: is localized to parser.c and cp-tree.h in cp and boils
down to only a few lines.
Testing OK on x86_64-linux. Approved off-line by Jason Merrill.
/cp
PR c++/91073
* cp-tree.h (is_constrained_auto): New.
* parser.c (cp_parser_maybe_commit_to_declaration): Correctly
handle concept-check expressions; take a cp_decl_specifier_seq*
instead of a bool.
(cp_parser_condition): Update call.
(cp_parser_simple_declaration): Likewise.
(cp_parser_placeholder_type_specifier): Correctly handle
concept-check expressions.
/testsuite
PR c++/91073
* g++.dg/concepts/pr91073-1.C: New.
* g++.dg/concepts/pr91073-2.C: Likewise.
Jason Merrill [Wed, 15 Jan 2020 19:13:13 +0000 (14:13 -0500)]
Revert "PR c++/33799 - destroy return value if local cleanup throws."
This change was blocking the coroutines merge, so I'm backing it out for now
to adjust my approach.
This reverts commit
7c82dd6c02d44d9d2cd84dda137c00b1a3cd6c90.
Jason Merrill [Wed, 15 Jan 2020 19:45:24 +0000 (14:45 -0500)]
PR c++/93257 - consteval void function.
A prvalue can have void type, and if it doesn't do anything prohibited in a
constant expression, it's vacuously constant.
* constexpr.c (verify_constant): Allow void_node.
Jason Merrill [Wed, 15 Jan 2020 14:31:11 +0000 (09:31 -0500)]
PR c++/92871 - bad code with xvalue and GNU ?: extension.
I steered Jakub wrong on the desired behavior for temp-extend1.C in the
context of bug 92831; it doesn't make sense to try to extend the lifetime of
a temporary that we've already materialized to evaluate the test. So this
patch munges the stabilized expression so that it won't be subject to
lifetime extension.
* call.c (prevent_lifetime_extension): New.
(build_conditional_expr_1): Use it.
Wilco Dijkstra [Wed, 15 Jan 2020 15:23:54 +0000 (15:23 +0000)]
Fix ctz issues (PR93231)
Further improve the ctz recognition: Avoid ICEing on negative shift
counts or multiply constants. Check the type is a char type for the
string constant case to avoid accidentally matching a wide STRING_CST.
Add a tree_expr_nonzero_p check to allow the optimization even if
CTZ_DEFINED_VALUE_AT_ZERO returns 0 or 1. Add extra test cases.
Bootstrap OK on AArch64 and x64.
gcc/
PR tree-optimization/93231
* tree-ssa-forwprop.c (optimize_count_trailing_zeroes): Check
input_type is unsigned. Use tree_to_shwi for shift constant.
Check CST_STRING element size is CHAR_TYPE_SIZE bits.
(simplify_count_trailing_zeroes): Add test to handle known non-zero
inputs more efficiently.
testsuite/
PR tree-optimization/93231
* gcc.dg/pr90838.c: New test.
* gcc.dg/pr93231.c: New test.
* gcc.target/aarch64/pr90838.c: Use #define u 0.
Jonathan Wakely [Wed, 15 Jan 2020 14:09:35 +0000 (14:09 +0000)]
libstdc++: Fix weakly_incrementable to allow __int128 (PR 93267)
The __iota_diff_t alias can be the type __int128, but that does not
satisfy the signed_integral and __is_signed_integer_like concepts when
__STRICT_ANSI__ is defined (which is true for -std=c++2a).
Because weakly_incrementable is defined in terms of signed_integral, it
is not satisfied by __int128, which means iota_view's iterator doesn't
always satisfy input_or_output_iterator and so iota_view is not always a
range.
The solution is to define __max_size_type and __max_diff_type using
__int128, so that __is_signed_integer_like allows __int128, and then
make weakly_incrementable use __is_signed_integer_like instead of
signed_integral.
PR libstdc++/93267
* include/bits/iterator_concepts.h (__max_diff_type, __max_size_type):
Move here from <bits/range_access.h> and define using __int128 when
available.
(__is_integer_like, __is_signed_integer_like): Move here from
<bits/range_access.h>.
(weakly_incrementable): Use __is_signed_integer_like.
* include/bits/range_access.h (__max_diff_type, __max_size_type)
(__is_integer_like, __is_signed_integer_like): Move to
<bits/iterator_concepts.h>.
(__make_unsigned_like_t): Move here from <ranges>.
* include/std/ranges (__make_unsigned_like_t): Move to
<bits/range_access.h>.
(iota_view): Replace using-directive with using-declarations.
* testsuite/std/ranges/iota/93267.cc: New test.
* testsuite/std/ranges/iota_view.cc: Move to new 'iota' sub-directory.
Uros Bizjak [Wed, 15 Jan 2020 15:29:41 +0000 (16:29 +0100)]
Remove invalid SSE2 ISA requirements in *movsf_internal.
* config/i386/i386.md (*movsf_internal): Do not require
SSE2 ISA for alternatives 14 and 15.
Nathan Sidwell [Wed, 15 Jan 2020 15:18:20 +0000 (07:18 -0800)]
[PR90916] Fix typo
Richard Biener [Wed, 15 Jan 2020 12:29:25 +0000 (13:29 +0100)]
middle-end/93273 - fix sinking clobbers across backedges
The previous work to fix PR93199 didn't take into account backedges
when defering insertion. The following simply avoids to defer in that
case since we know we'll not take secondary opportunities there.
2020-01-15 Richard Biener <rguenther@suse.de>
PR middle-end/93273
* tree-eh.c (sink_clobbers): If we already visited the destination
block do not defer insertion.
(pass_lower_eh_dispatch::execute): Maintain BB_VISITED for
the purpose of defered insertion.
* g++.dg/torture/pr93273.C: New testcase.
Jakub Jelinek [Wed, 15 Jan 2020 13:48:55 +0000 (14:48 +0100)]
Bump gcc/BASE-VER to 10.0.1 now that we are in stage4.
2020-01-15 Jakub Jelinek <jakub@redhat.com>
* BASE-VER: Bump to 10.0.1.
Richard Sandiford [Tue, 14 Jan 2020 22:24:37 +0000 (22:24 +0000)]
PR tree-optimization/93247 - ICE in get_load_store_type
My earlier update_epilogue_loop_vinfo patch introduced an ICE on these
tests for AVX512. If we use pattern stmts, STMT_VINFO_GATHER_SCATTER_P
is valid for both the original stmt and the pattern stmt, but
STMT_VINFO_MEMORY_ACCESS_TYPE is valid only for the latter.
2020-01-15 Richard Sandiford <richard.sandiford@arm.com>
gcc/
PR tree-optimization/93247
* tree-vect-loop.c (update_epilogue_loop_vinfo): Check the access
type of the stmt that we're going to vectorize.
gcc/testsuite/
PR tree-optimization/93247
* gcc.dg/vect/pr93247-1.c: New test.
* gcc.dg/vect/pr93247-2.c: Likewise.
Richard Sandiford [Thu, 9 Jan 2020 20:31:31 +0000 (20:31 +0000)]
Fix type mismatch in SLPed constructors
Having the "same" vector types with different modes means that we can
end up vectorising a constructor with a different mode from the lhs.
This patch adds a VIEW_CONVERT_EXPR in that case.
This showed up on existing tests when testing with fixed-length
-msve-vector-bits=128.
2020-01-15 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-slp.c (vectorize_slp_instance_root_stmt): Use a
VIEW_CONVERT_EXPR if the vectorized constructor has a diffeent
type from the lhs.
Jakub Jelinek [Wed, 15 Jan 2020 13:29:53 +0000 (14:29 +0100)]
Add *.md diff=md.
2020-01-15 Segher Boessenkool <segher@kernel.crashing.org>
Jakub Jelinek <jakub@redhat.com>
* .gitattributes: Add *.md diff=md.
contrib/
* gcc-git-customization.sh: Change uses to use in comment.
Martin Liska [Wed, 15 Jan 2020 12:34:20 +0000 (13:34 +0100)]
Do not call streamer_read_hwi in a function call.
* ipa-profile.c (ipa_profile_read_edge_summary): Do not allow
2 calls of streamer_read_hwi in a function call.
Jakub Jelinek [Wed, 15 Jan 2020 11:35:22 +0000 (12:35 +0100)]
Handle output of older git in gcc-descr and gcc-undescr aliases.
Richard Earnshaw [Wed, 15 Jan 2020 11:30:07 +0000 (11:30 +0000)]
contrib: Don't add push rules for personal and vendor spaces.
Originally, it seemed like a good idea to add automatic 'push' rules
to the git configuration, so that personal- and vendor-space commits
would automatically push to the right place. Unfortunately, this
changes git's behaviour and with these settings "git push" will try to
push all branches in a local tree up to the corresponding location on
the server (ignoring the push.default setting). The only known
mitigation for this is to ALWAYS use "git push <server> <branch>".
So instead, we no-longer add those rules by default and will document
the options on the wiki. We don't automatically remove the push
entries but do print out the command that will do so, if the user so
wishes.
* gcc-git-customization.sh: Explain why we want the user's
upstream account name. Don't add push rules. Check if push rules
have been added and suggest that they should be removed.
* git-fetch-vendor.sh: Don't add push rules.
Martin Sebor [Wed, 15 Jan 2020 11:08:50 +0000 (11:08 +0000)]
gcc/testsuite/ChangeLog:
* gcc.dg/Wstringop-overflow-17.c: Tweak test to avoid unrelated
failures due the absence of loop unrolling.
Richard Biener [Tue, 14 Jan 2020 07:48:20 +0000 (08:48 +0100)]
Optimize alias subset recording
When an alias-set is an already existing subset there is no need
to re-record its children as childs of the parent.
2020-01-15 Richard Biener <rguenther@suse.de>
* alias.c (record_alias_subset): Avoid redundant work when
subset is already recorded.
Joseph Myers [Wed, 15 Jan 2020 02:54:27 +0000 (02:54 +0000)]
Fix setting of DECL_CONTEXT in pushdecl (PR c/93072).
Bug 93072 is a case where the C front end (a) wrongly interprets an
inline declaration at block scope as indicating that DECL_CONTEXT
should be set for an inline function and (b) this results in an ICE.
This is a regression resulting from a previous fix of mine for other
bugs involving such declarations being wrongly interpreted elsewhere
as nested function declarations. The fix is similar to the previous
fix: use TREE_PUBLIC instead of DECL_EXTERNAL in another place as the
relevant test to determine whether to set DECL_CONTEXT. (When a
variable reaches the code in question in pushdecl, the two are
equivalent.)
Bootstrapped with no regressions for x86_64-pc-linux-gnu.
PR c/93072
gcc/c:
* c-decl.c (pushdecl): Use TREE_PUBLIC, not DECL_EXTERNAL, to
determine whether to set DECL_CONTEXT.
gcc/testsuite:
* gcc.dg/inline-42.c, gcc.dg/inline-43.c: New tests.
David Malcolm [Wed, 18 Dec 2019 18:27:49 +0000 (13:27 -0500)]
invoke.texi: update -fdiagnostics-show-cwe for analyzer
gcc/ChangeLog:
* doc/invoke.texi (-fdiagnostics-show-cwe): Add note that some of
the analyzer options provide CWE identifiers.
David Malcolm [Thu, 9 Jan 2020 15:12:59 +0000 (10:12 -0500)]
analyzer: fix ICE on METHOD_TYPE (PR 93212)
PR analyzer/93212 reports an ICE when attempting to use -fanalyzer
on a C++ source file. That isn't supported yet, but the fix is
trivial (handling METHOD_TYPE as well as FUNCTION_TYPE).
gcc/analyzer/ChangeLog:
PR analyzer/93212
* region-model.cc (make_region_for_type): Use
FUNC_OR_METHOD_TYPE_P rather than comparing against FUNCTION_TYPE.
* region-model.h (function_region::function_region): Likewise.
David Malcolm [Sat, 21 Dec 2019 13:49:03 +0000 (08:49 -0500)]
analyzer: fix global-sm-state issue affecting sm-signal
sm-signal.cc was failing to warn about the use of an fprintf call in a
signal handler when the signal handler function was non-static.
The root cause was a failure to copy global sm-state within
sm_state_map::clone_with_remapping as called by
program_state::can_merge_with_p, which led to the exploded node for
the entrypoint to the handler in the "normal" state being erroneously
reused for the "in_signal_handler" state, thus losing the global state,
and thus failing to warn.
This patch fixes the above, so that non-equal global sm-state values
prevent merger of program_state, thus requiring separate exploded nodes
for the "normal" and "in signal handler" states, and thus triggering
the warning for the reproducer.
gcc/analyzer/ChangeLog:
* program-state.cc (sm_state_map::clone_with_remapping): Copy
m_global_state.
(selftest::test_program_state_merging_2): New selftest.
(selftest::analyzer_program_state_cc_tests): Call it.
gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/signal-6.c: New test.
David Malcolm [Fri, 3 Jan 2020 14:26:16 +0000 (09:26 -0500)]
analyzer: cleanups to checker_path
This patch adds DISABLE_COPY_AND_ASSIGN to checker_path, and makes its
fields private.
gcc/analyzer/ChangeLog:
* checker-path.h (checker_path::get_checker_event): New function.
(checker_path): Add DISABLE_COPY_AND_ASSIGN; make fields private.
* diagnostic-manager.cc
(diagnostic_manager::prune_for_sm_diagnostic): Replace direct
access to checker_path::m_events with accessor functions. Fix
overlong line.
(diagnostic_manager::prune_interproc_events): Replace direct
access to checker_path::m_events with accessor functions.
(diagnostic_manager::finish_pruning): Likewise.
David Malcolm [Fri, 3 Jan 2020 13:55:33 +0000 (08:55 -0500)]
analyzer: delete checker_event::clone
checker_event has a clone vfunc implemented by all the concrete
subclasses, but this is never used (a holdover from a very early
implementation). This patch deletes it.
gcc/analyzer/ChangeLog:
* checker-path.h (checker_event::clone): Delete vfunc decl.
(debug_event::clone): Delete vfunc impl.
(custom_event::clone): Delete vfunc impl.
(statement_event::clone): Delete vfunc impl.
(function_entry_event::clone): Delete vfunc impl.
(state_change_event::clone): Delete vfunc impl.
(start_cfg_edge_event::clone): Delete vfunc impl.
(end_cfg_edge_event::clone): Delete vfunc impl.
(call_event::clone): Delete vfunc impl.
(return_event::clone): Delete vfunc impl.
(setjmp_event::clone): Delete vfunc impl.
(rewind_from_longjmp_event::clone): Delete vfunc impl.
(rewind_to_setjmp_event::clone): Delete vfunc impl.
(warning_event::clone): Delete vfunc impl.
David Malcolm [Fri, 20 Dec 2019 18:29:56 +0000 (13:29 -0500)]
analyzer: ensure .dot output is valid for an empty BB
This patch fixes an issue with the output of -fdump-analyzer-supergraph
on BBs with no statements, where the resulting files were unreadable by
dot e.g.:
Error: syntax error in line 1
... <TABLE BORDER="0"></TABLE> ...
in label of node node_10
gcc/analyzer/ChangeLog:
* supergraph.cc (supernode::dump_dot): Ensure that the TABLE
element has at least one TR.
gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/dot-output.c: Add test coverage for a BB with
no statements.
David Malcolm [Fri, 20 Dec 2019 15:56:28 +0000 (10:56 -0500)]
analyzer: fix tests for UNKNOWN_LOCATION
In the reproducer for PR analyzer/58237 I noticed that some events were
missing locations (and text); for example event 3 here:
| 15 | while (fgets(buf, 10, fp) != NULL)
| | ~
| | |
| | (2) following 'false' branch...
|
'f1': event 3
|
|cc1:
|
'f1': event 4
|
|<source>:19:1:
| 19 | }
| | ^
| | |
| | (4) 'fp' leaks here; was opened at (1)
|
The root cause is that various places in the analyzer compare locations
against UNKNOWN_LOCATION, which fails to detect an unknown location for
the case where an unknown_location has been wrapped into an ad-hoc
location to record a block.
This patch fixes the issue by using get_pure_location whenever testing
against UNKNOWN_LOCATION to look through ad-hoc wrappers.
For the case above, it thus picks a better location in
supernode::get_start_location for event (3) above, improving it to:
| 15 | while (fgets(buf, 10, fp) != NULL)
| | ~
| | |
| | (2) following 'false' branch...
|......
| 19 | }
| | ~
| | |
| | (3) ...to here
| | (4) 'fp' leaks here; was opened at (1)
|
gcc/analyzer/ChangeLog:
PR analyzer/58237
* engine.cc (leak_stmt_finder::find_stmt): Use get_pure_location
when comparing against UNKNOWN_LOCATION.
(stmt_requires_new_enode_p): Likewise.
(exploded_graph::dump_exploded_nodes): Likewise.
* supergraph.cc (supernode::get_start_location): Likewise.
(supernode::get_end_location): Likewise.
gcc/testsuite/ChangeLog:
PR analyzer/58237
* gcc.dg/analyzer/file-paths-1.c: New test.
David Malcolm [Fri, 20 Dec 2019 16:20:44 +0000 (11:20 -0500)]
tree-diagnostic-path.cc: properly handle ad-hoc wrappers of UNKNOWN_LOCATION
In the reproducer for PR analyzer/58237 I noticed that some events that
were missing locations were also missing text; for example event 3 here:
| 15 | while (fgets(buf, 10, fp) != NULL)
| | ~
| | |
| | (2) following 'false' branch...
|
'f1': event 3
|
|cc1:
|
The root cause is that the path_summary-printing code doesn't consider
ad-hoc locations when looking for reserved locations, and so fails to
detect an unknown location for the case where an unknown location has
been wrapped into an ad-hoc location to record a block.
This patch fixes the issue by using get_pure_location, thus looking
through ad-hoc wrappers, improving the result to:
| 15 | while (fgets(buf, 10, fp) != NULL)
| | ~
| | |
| | (2) following 'false' branch...
|
'f1': event 3
|
|cc1:
| (3): ...to here
|
gcc/ChangeLog:
* tree-diagnostic-path.cc (path_summary::event_range::print):
When testing for UNKNOWN_LOCATION, look through ad-hoc wrappers
using get_pure_location.
David Malcolm [Thu, 19 Dec 2019 20:59:04 +0000 (15:59 -0500)]
analyzer: add known stdio functions to sm-file.cc (PR analyzer/58237)
The analyzer ought to report various file leaks for the reproducer in
PR analyzer/58237, such as:
void f1(const char *str)
{
FILE * fp = fopen(str, "r");
char buf[10];
while (fgets(buf, 10, fp) != NULL)
{
/* Do something with buf */
}
/* Missing call to fclose. Need warning here for resource leak */
}
but fails to do so, due to not recognizing fgets, and thus
conservatively assuming that it could close "fp".
This patch adds a function_set to sm-file.cc of numerous stdio.h
functions that are known to not close the file (and which require a
valid FILE *, but that's a matter for a followup), fixing the issue.
gcc/analyzer/ChangeLog:
PR analyzer/58237
* analyzer-selftests.cc (selftest::run_analyzer_selftests): Call
selftest::analyzer_sm_file_cc_tests.
* analyzer-selftests.h (selftest::analyzer_sm_file_cc_tests): New
decl.
* sm-file.cc: Include "analyzer/function-set.h" and
"analyzer/analyzer-selftests.h".
(get_file_using_fns): New function.
(is_file_using_fn_p): New function.
(fileptr_state_machine::on_stmt): Return true for known functions.
(selftest::analyzer_sm_file_cc_tests): New function.
gcc/testsuite/ChangeLog:
PR analyzer/58237
* gcc.dg/analyzer/file-1.c (test_4): New.
* gcc.dg/analyzer/file-pr58237.c: New test.
Jakub Jelinek [Wed, 15 Jan 2020 00:31:20 +0000 (01:31 +0100)]
tree-optimization: Fix tree dse of __*_chk PR93262
The following testcase shows that GCC trunk mishandles DSE of __*_chk
calls. Tail trimming of the calls is fine, we want to just decrease the
third argument and keep the first two and last arguments unmodified.
But for head trimming, we currently increment the two by head_trim and
decrease the third by head_trim, so
__builtin___memcpy_chk (&a, b_2(D), 48, 32);
__builtin_memset (&a, 32, 16);
into:
_5 = b_2(D) + 16;
__builtin___memcpy_chk (&MEM <char> [(void *)&a + 16B], _5, 32, 32);
__builtin_memset (&a, 32, 16);
This is wrong, because the 32 was the determined (maximum) size of the
destination (char a[32]), but &a[16] has maximum size of 16, not 32.
The __builtin___memcpy_chk (&MEM <char> [(void *)&a + 16B], _5, 32, 32);
call is just folded later into
__builtin_memcpy (&MEM <char> [(void *)&a + 16B], _5, 32);
because it says that it copies as many bytes into destination as the
destination has. We need:
__builtin___memcpy_chk (&MEM <char> [(void *)&a + 16B], _5, 32, 16);
instead, which will terminate the program instead of letting it silently
overflow the buffer.
The patch just punts if we'd need to decrease the last argument below 0.
Fortunately, release branches are unaffected.
P.S. it was quite hard to make the runtime test working, in builtins.exp
neither dg-options nor dg-additional-options work and builtins.exp adds
-fno-tree-dse among several other -fno-* options. Fortunately optimize
attribute works.
2020-01-15 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/93262
* tree-ssa-dse.c (maybe_trim_memstar_call): For *_chk builtins,
perform head trimming only if the last argument is constant,
either all ones, or larger or equal to head trim, in the latter
case decrease the last argument by head_trim.
* gcc.c-torture/execute/builtins/pr93262-chk.c: New test.
* gcc.c-torture/execute/builtins/pr93262-chk-lib.c: New file.
* gcc.c-torture/execute/builtins/pr93262-chk.x: New file.
Jakub Jelinek [Wed, 15 Jan 2020 00:28:43 +0000 (01:28 +0100)]
tree-optimization: Fix tree dse of strncpy PR93249
As the testcase shows, tail trimming of strncpy in tree-ssa-dse.c is fine,
we just copy or clear fewer bytes in the destination, but unlike
memcpy/memset etc., head trimming is problematic in certain cases.
If we can prove that there are no zero bytes among initial head_trim bytes,
it is ok to trim it, if we can prove there is at least one zero byte among
initial head_trim bytes, we could (not implemented in the patch) turn
the strncpy into memset 0, but otherwise we need to avoid the head trimming,
because the presence or absence of NUL byte there changes the behavior for
subsequent bytes, whether further bytes from src are copied or if further
bytes are cleared.
2020-01-15 Jakub Jelinek <jakub@redhat.com>
PR tree-optimization/93249
* tree-ssa-dse.c: Include builtins.h and gimple-fold.h.
(maybe_trim_memstar_call): Move head_trim and tail_trim vars to
function body scope, reindent. For BUILTIN_IN_STRNCPY*, don't
perform head trim unless we can prove there are no '\0' chars
from the source among the first head_trim chars.
* gcc.c-torture/execute/pr93249.c: New test.
GCC Administrator [Wed, 15 Jan 2020 00:16:26 +0000 (00:16 +0000)]
Daily bump.
David Malcolm [Thu, 19 Dec 2019 20:50:29 +0000 (15:50 -0500)]
analyzer: introduce a set of known async-signal-unsafe functions
This patch uses the class function_set from the previous patch to
generalize the test for an fprintf inside a signal handler to
check for a set of known async-signal-unsafe functions.
gcc/analyzer/ChangeLog:
* analyzer-selftests.cc (selftest::run_analyzer_selftests): Call
selftest::analyzer_sm_signal_cc_tests.
* analyzer-selftests.h (selftest::analyzer_sm_signal_cc_tests):
New decl.
* sm-signal.cc: Include "analyzer/function-set.h" and
"analyzer/analyzer-selftests.h".
(get_async_signal_unsafe_fns): New function.
(signal_unsafe_p): Reimplement in terms of the above.
(selftest::analyzer_sm_signal_cc_tests): New function.
gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/signal-5.c: New test.
David Malcolm [Thu, 19 Dec 2019 20:43:04 +0000 (15:43 -0500)]
analyzer: add function-set.cc/h
This patch adds a simple mechanism for tracking sets of functions
for which a particular property holds, as a pragmatic way to build
knowledge about important APIs into the analyzer without requiring
markup of the user's libc.
gcc/ChangeLog:
* Makefile.in (ANALYZER_OBJS): Add analyzer/function-set.o.
gcc/analyzer/ChangeLog:
* analyzer-selftests.cc (selftest::run_analyzer_selftests): Call
selftest::analyzer_function_set_cc_tests.
* analyzer-selftests.h (selftest::analyzer_function_set_cc_tests):
New decl.
* function-set.cc: New file.
* function-set.h: New file.
David Malcolm [Sat, 14 Dec 2019 00:48:06 +0000 (19:48 -0500)]
analyzer: purge state for unknown function calls
Whilst analyzing the reproducer for detecting CVE-2005-1689
(krb5-1.4.1's src/lib/krb5/krb/recvauth.c), the analyzer reports
a false double-free of the form:
krb5_xfree(inbuf.data);
krb5_read_message(..., &inbuf);
krb5_xfree(inbuf.data); /* false diagnostic here. */
where the call to krb5_read_message overwrites inbuf.data with
a freshly-malloced buffer.
This patch fixes the issue by purging state more thorougly when
handling a call with unknown behavior, by walking the graph of
memory regions that are reachable from the call.
gcc/analyzer/ChangeLog:
* analyzer.h (fndecl_has_gimple_body_p): New decl.
* engine.cc (impl_region_model_context::on_unknown_change): New
function.
(fndecl_has_gimple_body_p): Make non-static.
(exploded_node::on_stmt): Treat __analyzer_dump_exploded_nodes as
known. Track whether we have a call with unknown side-effects and
pass it to on_call_post.
* exploded-graph.h (impl_region_model_context::on_unknown_change):
New decl.
* program-state.cc (sm_state_map::on_unknown_change): New function.
* program-state.h (sm_state_map::on_unknown_change): New decl.
* region-model.cc: Include "bitmap.h".
(region_model::on_call_pre): Return a bool, capturing whether the
call has unknown side effects.
(region_model::on_call_post): Add arg "bool unknown_side_effects"
and if true, call handle_unrecognized_call.
(class reachable_regions): New class.
(region_model::handle_unrecognized_call): New function.
* region-model.h (region_model::on_call_pre): Return a bool.
(region_model::on_call_post): Add arg "bool unknown_side_effects".
(region_model::handle_unrecognized_call): New decl.
(region_model_context::on_unknown_change): New vfunc.
(test_region_model_context::on_unknown_change): New function.
gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/data-model-1.c: Remove xfail.
* gcc.dg/analyzer/data-model-5b.c: Likewise.
* gcc.dg/analyzer/data-model-5c.c: Likewise.
* gcc.dg/analyzer/setjmp-3.c: Mark "foo" as pure.
* gcc.dg/analyzer/setjmp-4.c: Likewise.
* gcc.dg/analyzer/setjmp-6.c: Likewise.
* gcc.dg/analyzer/setjmp-7.c: Likewise.
* gcc.dg/analyzer/setjmp-7a.c: Likewise.
* gcc.dg/analyzer/setjmp-8.c: Likewise.
* gcc.dg/analyzer/setjmp-9.c: Likewise.
* gcc.dg/analyzer/unknown-fns.c: New test.
David Malcolm [Sat, 14 Dec 2019 00:36:11 +0000 (19:36 -0500)]
analyzer: fix dedupe issue seen with CVE-2005-1689
Whilst analyzing the reproducer for detecting CVE-2005-1689
(krb5-1.4.1's src/lib/krb5/krb/recvauth.c), the analyzer reported
11 double-free diagnostics on lines of the form:
krb5_xfree(inbuf.data);
with no deduplication occcurring.
The root cause is that the diagnostics each have a COMPONENT_REF for
the inbuf.data, but they are different trees, and the de-duplication
logic was using pointer equality.
This patch replaces the pointer equality tests with calls to a new
pending_diagnostic::same_tree_p, implemented using simple_cst_equal.
With this patch, de-duplication occurs, and only 3 diagnostics are
reported. The 11 diagnostics are partitioned into 3 dedupe keys,
2 with 2 duplicates and 1 with 7 duplicates.
gcc/analyzer/ChangeLog:
* diagnostic-manager.cc (saved_diagnostic::operator==): Move here
from header. Replace pointer equality test on m_var with call to
pending_diagnostic::same_tree_p.
* diagnostic-manager.h (saved_diagnostic::operator==): Move to
diagnostic-manager.cc.
* pending-diagnostic.cc (pending_diagnostic::same_tree_p): New.
* pending-diagnostic.h (pending_diagnostic::same_tree_p): New.
* sm-file.cc (file_diagnostic::subclass_equal_p): Replace pointer
equality on m_arg with call to pending_diagnostic::same_tree_p.
* sm-malloc.cc (malloc_diagnostic::subclass_equal_p): Likewise.
(possible_null_arg::subclass_equal_p): Likewise.
(null_arg::subclass_equal_p): Likewise.
(free_of_non_heap::subclass_equal_p): Likewise.
* sm-pattern-test.cc (pattern_match::operator==): Likewise.
* sm-sensitive.cc (exposure_through_output_file::operator==):
Likewise.
* sm-taint.cc (tainted_array_index::operator==): Likewise.
gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/CVE-2005-1689-dedupe-issue.c: New test.
Jakub Jelinek [Tue, 14 Jan 2020 23:35:58 +0000 (00:35 +0100)]
Remove bogus initial lines from test.
2020-01-15 Jakub Jelinek <jakub@redhat.com>
PR lto/91576
* g++.dg/lto/odr-8_1.C: Remove bogus initial lines.
Jakub Jelinek [Tue, 14 Jan 2020 23:30:10 +0000 (00:30 +0100)]
i386: Fix wrong-code x86 issue with avx512{f,vl} fma PR93009
As mentioned in the PR, the following testcase is miscompiled with avx512vl.
The reason is that the fma *_bcst_1 define_insns have two alternatives:
"=v,v" "0,v" "v,0" "m,m" and use the same
vfmadd213* %3<avx512bcst>, %2, %0<sd_mask_op4>
pattern. If the first alternative is chosen, everything is ok, but if the
second alternative is chosen, %2 and %0 are the same register, so instead
of doing dest=dest*another+membcst we do dest=dest*dest+membcst.
Now, to fix this, either we'd need separate:
"vfmadd213<ssemodesuffix>\t{%3<avx512bcst>, %2, %0<sd_mask_op4>|%0<sd_mask_op4>, %2, %3<avx512bcst>}
vfmadd213<ssemodesuffix>\t{%3<avx512bcst>, %1, %0<sd_mask_op4>|%0<sd_mask_op4>, %1, %3<avx512bcst>}"
where for the second alternative, we'd just use %1 instead of %2, but
what I think is actually cleaner is just use a single alternative and
make the two multiplication operands commutative, which they really are.
2020-01-15 Jakub Jelinek <jakub@redhat.com>
PR target/93009
* config/i386/sse.md
(*<sd_mask_codefor>fma_fmadd_<mode><sd_maskz_name>_bcst_1,
*<sd_mask_codefor>fma_fmsub_<mode><sd_maskz_name>_bcst_1,
*<sd_mask_codefor>fma_fnmadd_<mode><sd_maskz_name>_bcst_1,
*<sd_mask_codefor>fma_fnmsub_<mode><sd_maskz_name>_bcst_1): Use
just a single alternative instead of two, make operands 1 and 2
commutative.
* gcc.target/i386/avx512vl-pr93009.c: New test.
David Malcolm [Sat, 14 Dec 2019 00:47:47 +0000 (19:47 -0500)]
analyzer: better logging for dedupe_winners::add
gcc/analyzer/ChangeLog:
* diagnostic-manager.cc (dedupe_winners::add): Add logging
of deduplication decisions made.
Nathan Sidwell [Tue, 14 Jan 2020 21:08:14 +0000 (13:08 -0800)]
[PR90916] Use TI accessor.
PR c++/90916
* pt.c (retrieve_specialization): Use get_template_info, not open
coding access.
Jan Hubicka [Tue, 14 Jan 2020 20:45:03 +0000 (21:45 +0100)]
Compare TREE_ADDRESSABLE and TYPE_MODE when ODR checking types.
PR lto/91576
* ipa-devirt.c (odr_types_equivalent_p): Compare TREE_ADDRESSABLE and
TYPE_MODE.
* testsuite/g++.dg/lto/odr-8_0.C: New testcase.
* testsuite/g++.dg/lto/odr-8_1.C: New testcase.
David Malcolm [Fri, 27 Sep 2019 13:23:16 +0000 (09:23 -0400)]
Initial commit of analyzer
This patch adds a static analysis pass to the middle-end, focusing
for this release on C code, and malloc/free issues in particular.
See:
https://gcc.gnu.org/wiki/DavidMalcolm/StaticAnalyzer
gcc/ChangeLog:
* Makefile.in (lang_opt_files): Add analyzer.opt.
(ANALYZER_OBJS): New.
(OBJS): Add digraph.o, graphviz.o, ordered-hash-map-tests.o,
tristate.o and ANALYZER_OBJS.
(TEXI_GCCINT_FILES): Add analyzer.texi.
* common.opt (-fanalyzer): New driver option.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (--disable-analyzer, ENABLE_ANALYZER): New option.
(gccdepdir): Also create depdir for "analyzer" subdir.
* digraph.cc: New file.
* digraph.h: New file.
* doc/analyzer.texi: New file.
* doc/gccint.texi ("Static Analyzer") New menu item.
(analyzer.texi): Include it.
* doc/invoke.texi ("Static Analyzer Options"): New list and new section.
("Warning Options"): Add static analysis warnings to the list.
(-Wno-analyzer-double-fclose): New option.
(-Wno-analyzer-double-free): New option.
(-Wno-analyzer-exposure-through-output-file): New option.
(-Wno-analyzer-file-leak): New option.
(-Wno-analyzer-free-of-non-heap): New option.
(-Wno-analyzer-malloc-leak): New option.
(-Wno-analyzer-possible-null-argument): New option.
(-Wno-analyzer-possible-null-dereference): New option.
(-Wno-analyzer-null-argument): New option.
(-Wno-analyzer-null-dereference): New option.
(-Wno-analyzer-stale-setjmp-buffer): New option.
(-Wno-analyzer-tainted-array-index): New option.
(-Wno-analyzer-use-after-free): New option.
(-Wno-analyzer-use-of-pointer-in-stale-stack-frame): New option.
(-Wno-analyzer-use-of-uninitialized-value): New option.
(-Wanalyzer-too-complex): New option.
(-fanalyzer-call-summaries): New warning.
(-fanalyzer-checker=): New warning.
(-fanalyzer-fine-grained): New warning.
(-fno-analyzer-state-merge): New warning.
(-fno-analyzer-state-purge): New warning.
(-fanalyzer-transitivity): New warning.
(-fanalyzer-verbose-edges): New warning.
(-fanalyzer-verbose-state-changes): New warning.
(-fanalyzer-verbosity=): New warning.
(-fdump-analyzer): New warning.
(-fdump-analyzer-callgraph): New warning.
(-fdump-analyzer-exploded-graph): New warning.
(-fdump-analyzer-exploded-nodes): New warning.
(-fdump-analyzer-exploded-nodes-2): New warning.
(-fdump-analyzer-exploded-nodes-3): New warning.
(-fdump-analyzer-supergraph): New warning.
* doc/sourcebuild.texi (dg-require-dot): New.
(dg-check-dot): New.
* gdbinit.in (break-on-saved-diagnostic): New command.
* graphviz.cc: New file.
* graphviz.h: New file.
* ordered-hash-map-tests.cc: New file.
* ordered-hash-map.h: New file.
* passes.def (pass_analyzer): Add before
pass_ipa_whole_program_visibility.
* selftest-run-tests.c (selftest::run_tests): Call
selftest::ordered_hash_map_tests_cc_tests.
* selftest.h (selftest::ordered_hash_map_tests_cc_tests): New
decl.
* shortest-paths.h: New file.
* timevar.def (TV_ANALYZER): New timevar.
(TV_ANALYZER_SUPERGRAPH): Likewise.
(TV_ANALYZER_STATE_PURGE): Likewise.
(TV_ANALYZER_PLAN): Likewise.
(TV_ANALYZER_SCC): Likewise.
(TV_ANALYZER_WORKLIST): Likewise.
(TV_ANALYZER_DUMP): Likewise.
(TV_ANALYZER_DIAGNOSTICS): Likewise.
(TV_ANALYZER_SHORTEST_PATHS): Likewise.
* tree-pass.h (make_pass_analyzer): New decl.
* tristate.cc: New file.
* tristate.h: New file.
gcc/analyzer/ChangeLog:
* ChangeLog: New file.
* analyzer-selftests.cc: New file.
* analyzer-selftests.h: New file.
* analyzer.opt: New file.
* analysis-plan.cc: New file.
* analysis-plan.h: New file.
* analyzer-logging.cc: New file.
* analyzer-logging.h: New file.
* analyzer-pass.cc: New file.
* analyzer.cc: New file.
* analyzer.h: New file.
* call-string.cc: New file.
* call-string.h: New file.
* checker-path.cc: New file.
* checker-path.h: New file.
* constraint-manager.cc: New file.
* constraint-manager.h: New file.
* diagnostic-manager.cc: New file.
* diagnostic-manager.h: New file.
* engine.cc: New file.
* engine.h: New file.
* exploded-graph.h: New file.
* pending-diagnostic.cc: New file.
* pending-diagnostic.h: New file.
* program-point.cc: New file.
* program-point.h: New file.
* program-state.cc: New file.
* program-state.h: New file.
* region-model.cc: New file.
* region-model.h: New file.
* sm-file.cc: New file.
* sm-malloc.cc: New file.
* sm-malloc.dot: New file.
* sm-pattern-test.cc: New file.
* sm-sensitive.cc: New file.
* sm-signal.cc: New file.
* sm-taint.cc: New file.
* sm.cc: New file.
* sm.h: New file.
* state-purge.cc: New file.
* state-purge.h: New file.
* supergraph.cc: New file.
* supergraph.h: New file.
gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/CVE-2005-1689-minimal.c: New test.
* gcc.dg/analyzer/abort.c: New test.
* gcc.dg/analyzer/alloca-leak.c: New test.
* gcc.dg/analyzer/analyzer-decls.h: New header.
* gcc.dg/analyzer/analyzer-verbosity-0.c: New test.
* gcc.dg/analyzer/analyzer-verbosity-1.c: New test.
* gcc.dg/analyzer/analyzer-verbosity-2.c: New test.
* gcc.dg/analyzer/analyzer.exp: New suite.
* gcc.dg/analyzer/attribute-nonnull.c: New test.
* gcc.dg/analyzer/call-summaries-1.c: New test.
* gcc.dg/analyzer/conditionals-2.c: New test.
* gcc.dg/analyzer/conditionals-3.c: New test.
* gcc.dg/analyzer/conditionals-notrans.c: New test.
* gcc.dg/analyzer/conditionals-trans.c: New test.
* gcc.dg/analyzer/data-model-1.c: New test.
* gcc.dg/analyzer/data-model-2.c: New test.
* gcc.dg/analyzer/data-model-3.c: New test.
* gcc.dg/analyzer/data-model-4.c: New test.
* gcc.dg/analyzer/data-model-5.c: New test.
* gcc.dg/analyzer/data-model-5b.c: New test.
* gcc.dg/analyzer/data-model-5c.c: New test.
* gcc.dg/analyzer/data-model-5d.c: New test.
* gcc.dg/analyzer/data-model-6.c: New test.
* gcc.dg/analyzer/data-model-7.c: New test.
* gcc.dg/analyzer/data-model-8.c: New test.
* gcc.dg/analyzer/data-model-9.c: New test.
* gcc.dg/analyzer/data-model-11.c: New test.
* gcc.dg/analyzer/data-model-12.c: New test.
* gcc.dg/analyzer/data-model-13.c: New test.
* gcc.dg/analyzer/data-model-14.c: New test.
* gcc.dg/analyzer/data-model-15.c: New test.
* gcc.dg/analyzer/data-model-16.c: New test.
* gcc.dg/analyzer/data-model-17.c: New test.
* gcc.dg/analyzer/data-model-18.c: New test.
* gcc.dg/analyzer/data-model-19.c: New test.
* gcc.dg/analyzer/data-model-path-1.c: New test.
* gcc.dg/analyzer/disabling.c: New test.
* gcc.dg/analyzer/dot-output.c: New test.
* gcc.dg/analyzer/double-free-lto-1-a.c: New test.
* gcc.dg/analyzer/double-free-lto-1-b.c: New test.
* gcc.dg/analyzer/double-free-lto-1.h: New header.
* gcc.dg/analyzer/equivalence.c: New test.
* gcc.dg/analyzer/explode-1.c: New test.
* gcc.dg/analyzer/explode-2.c: New test.
* gcc.dg/analyzer/factorial.c: New test.
* gcc.dg/analyzer/fibonacci.c: New test.
* gcc.dg/analyzer/fields.c: New test.
* gcc.dg/analyzer/file-1.c: New test.
* gcc.dg/analyzer/file-2.c: New test.
* gcc.dg/analyzer/function-ptr-1.c: New test.
* gcc.dg/analyzer/function-ptr-2.c: New test.
* gcc.dg/analyzer/function-ptr-3.c: New test.
* gcc.dg/analyzer/gzio-2.c: New test.
* gcc.dg/analyzer/gzio-3.c: New test.
* gcc.dg/analyzer/gzio-3a.c: New test.
* gcc.dg/analyzer/gzio.c: New test.
* gcc.dg/analyzer/infinite-recursion.c: New test.
* gcc.dg/analyzer/loop-2.c: New test.
* gcc.dg/analyzer/loop-2a.c: New test.
* gcc.dg/analyzer/loop-3.c: New test.
* gcc.dg/analyzer/loop-4.c: New test.
* gcc.dg/analyzer/loop.c: New test.
* gcc.dg/analyzer/malloc-1.c: New test.
* gcc.dg/analyzer/malloc-2.c: New test.
* gcc.dg/analyzer/malloc-3.c: New test.
* gcc.dg/analyzer/malloc-callbacks.c: New test.
* gcc.dg/analyzer/malloc-dce.c: New test.
* gcc.dg/analyzer/malloc-dedupe-1.c: New test.
* gcc.dg/analyzer/malloc-ipa-1.c: New test.
* gcc.dg/analyzer/malloc-ipa-10.c: New test.
* gcc.dg/analyzer/malloc-ipa-11.c: New test.
* gcc.dg/analyzer/malloc-ipa-12.c: New test.
* gcc.dg/analyzer/malloc-ipa-13.c: New test.
* gcc.dg/analyzer/malloc-ipa-2.c: New test.
* gcc.dg/analyzer/malloc-ipa-3.c: New test.
* gcc.dg/analyzer/malloc-ipa-4.c: New test.
* gcc.dg/analyzer/malloc-ipa-5.c: New test.
* gcc.dg/analyzer/malloc-ipa-6.c: New test.
* gcc.dg/analyzer/malloc-ipa-7.c: New test.
* gcc.dg/analyzer/malloc-ipa-8-double-free.c: New test.
* gcc.dg/analyzer/malloc-ipa-8-lto-a.c: New test.
* gcc.dg/analyzer/malloc-ipa-8-lto-b.c: New test.
* gcc.dg/analyzer/malloc-ipa-8-lto-c.c: New test.
* gcc.dg/analyzer/malloc-ipa-8-lto.h: New test.
* gcc.dg/analyzer/malloc-ipa-8-unchecked.c: New test.
* gcc.dg/analyzer/malloc-ipa-9.c: New test.
* gcc.dg/analyzer/malloc-macro-inline-events.c: New test.
* gcc.dg/analyzer/malloc-macro-separate-events.c: New test.
* gcc.dg/analyzer/malloc-macro.h: New header.
* gcc.dg/analyzer/malloc-many-paths-1.c: New test.
* gcc.dg/analyzer/malloc-many-paths-2.c: New test.
* gcc.dg/analyzer/malloc-many-paths-3.c: New test.
* gcc.dg/analyzer/malloc-paths-1.c: New test.
* gcc.dg/analyzer/malloc-paths-10.c: New test.
* gcc.dg/analyzer/malloc-paths-2.c: New test.
* gcc.dg/analyzer/malloc-paths-3.c: New test.
* gcc.dg/analyzer/malloc-paths-4.c: New test.
* gcc.dg/analyzer/malloc-paths-5.c: New test.
* gcc.dg/analyzer/malloc-paths-6.c: New test.
* gcc.dg/analyzer/malloc-paths-7.c: New test.
* gcc.dg/analyzer/malloc-paths-8.c: New test.
* gcc.dg/analyzer/malloc-paths-9.c: New test.
* gcc.dg/analyzer/malloc-vs-local-1a.c: New test.
* gcc.dg/analyzer/malloc-vs-local-1b.c: New test.
* gcc.dg/analyzer/malloc-vs-local-2.c: New test.
* gcc.dg/analyzer/malloc-vs-local-3.c: New test.
* gcc.dg/analyzer/malloc-vs-local-4.c: New test.
* gcc.dg/analyzer/operations.c: New test.
* gcc.dg/analyzer/params-2.c: New test.
* gcc.dg/analyzer/params.c: New test.
* gcc.dg/analyzer/paths-1.c: New test.
* gcc.dg/analyzer/paths-1a.c: New test.
* gcc.dg/analyzer/paths-2.c: New test.
* gcc.dg/analyzer/paths-3.c: New test.
* gcc.dg/analyzer/paths-4.c: New test.
* gcc.dg/analyzer/paths-5.c: New test.
* gcc.dg/analyzer/paths-6.c: New test.
* gcc.dg/analyzer/paths-7.c: New test.
* gcc.dg/analyzer/pattern-test-1.c: New test.
* gcc.dg/analyzer/pattern-test-2.c: New test.
* gcc.dg/analyzer/pointer-merging.c: New test.
* gcc.dg/analyzer/pr61861.c: New test.
* gcc.dg/analyzer/pragma-1.c: New test.
* gcc.dg/analyzer/scope-1.c: New test.
* gcc.dg/analyzer/sensitive-1.c: New test.
* gcc.dg/analyzer/setjmp-1.c: New test.
* gcc.dg/analyzer/setjmp-2.c: New test.
* gcc.dg/analyzer/setjmp-3.c: New test.
* gcc.dg/analyzer/setjmp-4.c: New test.
* gcc.dg/analyzer/setjmp-5.c: New test.
* gcc.dg/analyzer/setjmp-6.c: New test.
* gcc.dg/analyzer/setjmp-7.c: New test.
* gcc.dg/analyzer/setjmp-7a.c: New test.
* gcc.dg/analyzer/setjmp-8.c: New test.
* gcc.dg/analyzer/setjmp-9.c: New test.
* gcc.dg/analyzer/signal-1.c: New test.
* gcc.dg/analyzer/signal-2.c: New test.
* gcc.dg/analyzer/signal-3.c: New test.
* gcc.dg/analyzer/signal-4a.c: New test.
* gcc.dg/analyzer/signal-4b.c: New test.
* gcc.dg/analyzer/strcmp-1.c: New test.
* gcc.dg/analyzer/switch.c: New test.
* gcc.dg/analyzer/taint-1.c: New test.
* gcc.dg/analyzer/zlib-1.c: New test.
* gcc.dg/analyzer/zlib-2.c: New test.
* gcc.dg/analyzer/zlib-3.c: New test.
* gcc.dg/analyzer/zlib-4.c: New test.
* gcc.dg/analyzer/zlib-5.c: New test.
* gcc.dg/analyzer/zlib-6.c: New test.
* lib/gcc-defs.exp (dg-check-dot): New procedure.
* lib/target-supports.exp (check_dot_available): New procedure.
(check_effective_target_analyzer): New.
* lib/target-supports-dg.exp (dg-require-dot): New procedure.
Jason Merrill [Tue, 14 Jan 2020 18:59:54 +0000 (13:59 -0500)]
PR c++/92590 - wrong handling of inherited default ctor.
I thought my earlier fix for 91930 was an obvious bug fix, but apparently an
inherited constructor does not count as user-declared. So this patch
reverts that change and the other follow-on patches, and fixes 91930
differently, by not letting the inherited default constructor hide the
implicitly-declared default constructor.
* class.c (add_method): A constrained inherited ctor doesn't hide an
implicit derived ctor.
Revert:
PR c++/91930 - ICE with constrained inherited default ctor.
* name-lookup.c (do_class_using_decl): Set TYPE_HAS_USER_CONSTRUCTOR
for inherited constructor.
PR c++/92552 - ICE with inherited constrained default ctor.
* pt.c (instantiate_class_template_1): Copy
TYPE_HAS_USER_CONSTRUCTOR.
PR c++/92594 - ICE with inherited trivial default ctor.
* method.c (trivial_fn_p): Treat an inherited default constructor
like a normal default constructor.
Nathan Sidwell [Tue, 14 Jan 2020 19:12:40 +0000 (11:12 -0800)]
[PR90916] ICE in retrieve specialization
https://gcc.gnu.org/ml/gcc-patches/2020-01/msg00809.html
PR c++/90916
* pt.c (retrieve_specialization): Get the TI from the decl or the
classtype as appropriate.
Uros Bizjak [Tue, 14 Jan 2020 18:07:47 +0000 (19:07 +0100)]
PR target/93254 - -msse generates sse2 instructions
* config/i386/i386.md (*movsf_internal): Require SSE2 ISA for
alternatives 9 and 10.
David Malcolm [Wed, 11 Dec 2019 02:18:23 +0000 (21:18 -0500)]
hash-table.h: support non-zero empty values in empty_slow (v2)
gcc/cp/ChangeLog:
* cp-gimplify.c (source_location_table_entry_hash::empty_zero_p):
New static constant.
* cp-tree.h (named_decl_hash::empty_zero_p): Likewise.
(struct named_label_hash::empty_zero_p): Likewise.
* decl2.c (mangled_decl_hash::empty_zero_p): Likewise.
gcc/ChangeLog:
* attribs.c (excl_hash_traits::empty_zero_p): New static constant.
* gcov.c (function_start_pair_hash::empty_zero_p): Likewise.
* graphite.c (struct sese_scev_hash::empty_zero_p): Likewise.
* hash-map-tests.c (selftest::test_nonzero_empty_key): New selftest.
(selftest::hash_map_tests_c_tests): Call it.
* hash-map-traits.h (simple_hashmap_traits::empty_zero_p):
New static constant, using the value of = H::empty_zero_p.
(unbounded_hashmap_traits::empty_zero_p): Likewise, using the value
from default_hash_traits <Value>.
* hash-map.h (hash_map::empty_zero_p): Likewise, using the value
from Traits.
* hash-set-tests.c (value_hash_traits::empty_zero_p): Likewise.
* hash-table.h (hash_table::alloc_entries): Guard the loop of
calls to mark_empty with !Descriptor::empty_zero_p.
(hash_table::empty_slow): Conditionalize the memset call with a
check that Descriptor::empty_zero_p; otherwise, loop through the
entries calling mark_empty on them.
* hash-traits.h (int_hash::empty_zero_p): New static constant.
(pointer_hash::empty_zero_p): Likewise.
(pair_hash::empty_zero_p): Likewise.
* ipa-devirt.c (default_hash_traits <type_pair>::empty_zero_p):
Likewise.
* ipa-prop.c (ipa_bit_ggc_hash_traits::empty_zero_p): Likewise.
(ipa_vr_ggc_hash_traits::empty_zero_p): Likewise.
* profile.c (location_triplet_hash::empty_zero_p): Likewise.
* sanopt.c (sanopt_tree_triplet_hash::empty_zero_p): Likewise.
(sanopt_tree_couple_hash::empty_zero_p): Likewise.
* tree-hasher.h (int_tree_hasher::empty_zero_p): Likewise.
* tree-ssa-sccvn.c (vn_ssa_aux_hasher::empty_zero_p): Likewise.
* tree-vect-slp.c (bst_traits::empty_zero_p): Likewise.
* tree-vectorizer.h
(default_hash_traits<scalar_cond_masked_key>::empty_zero_p):
Likewise.
Jason Merrill [Tue, 14 Jan 2020 06:00:48 +0000 (01:00 -0500)]
PR c++/92594 - ICE with inherited trivial default ctor.
Here we were getting confused about whether or not pod_tuple has a trivial
default constructor. bar inherits the trivial e default constructor; the
effect of calling that inherited constructor is equivalent to calling a
defaulted default constructor in bar, so let's treat it as such.
* method.c (trivial_fn_p): Treat an inherited default constructor
like a normal default constructor.
Jason Merrill [Tue, 14 Jan 2020 05:05:47 +0000 (00:05 -0500)]
PR c++/92009 - ICE with punning of typeid.
There were two issues in this PR:
1) We were crashing in is_really_empty_class because we say that the
internal RTTI types are classes, but never gave them TYPE_BINFO.
2) We were allowing the cast to a different pointer type because STRIP_NOPS
in cxx_fold_indirect_ref ignored REINTERPRET_CAST_P.
* rtti.c (get_tinfo_desc): Call xref_basetypes.
* constexpr.c (cxx_fold_indirect_ref): Don't strip
REINTERPRET_CAST_P.
Jason Merrill [Tue, 14 Jan 2020 05:22:56 +0000 (00:22 -0500)]
Fix dejagnu pruning of constexpr context messages.
I wonder why nobody fixed this until now; it's been two years since the
diagnostic context output was changed.
* lib/prune.exp (prune_gcc_output): Adjust constexpr pattern.
Georg-Johann Lay [Tue, 14 Jan 2020 16:45:40 +0000 (17:45 +0100)]
The mentioned auto-generated file is no more part of the
GCC sources, it's auto-generated in $(builddir) during build.
PR target/92055
* contrib/gcc_update (files_and_dependencies): Remove
entry for gcc/config/avr/t-multilib.
Georg-Johann Lay [Tue, 14 Jan 2020 10:09:38 +0000 (11:09 +0100)]
Typo.
libgcc/
* config/avr/lib1funcs.S (skip): Simplify.
Richard Biener [Tue, 14 Jan 2020 07:43:32 +0000 (08:43 +0100)]
PR middle-end/93246 - missing alias subsets
Starting with the introduction of TYPE_TYPELESS_STORAGE the situation
of having a alias-set zero aggregate field became more common which
prevents recording alias-sets of fields of said aggregate as subset
of the outer aggregate. component_uses_parent_alias_set_from in the
past fended off some of the issues with that but the alias oracles
use of the alias set of the base of an access path never appropriately
handled it.
The following makes it so that alias-sets of fields of alias-set zero
aggregate fields are still recorded as subset of the container.
2020-01-14 Richard Biener <rguenther@suse.de>
PR middle-end/93246
* alias.c (record_component_aliases): Take superset to record
into, recurse for alias-set zero fields.
(record_component_aliases): New oveerload wrapping around the above.
* g++.dg/torture/pr93246.C: New testcase.
Kewen Lin [Tue, 14 Jan 2020 08:34:10 +0000 (02:34 -0600)]
Fix typo and avoid possible memory leak in average_num_loop_insns
Function average_num_loop_insns forgets to free loop body in early
return. Besides, overflow comparison checks 1000000 (e6) but the
return value is 100000 (e5), fix this typo.
gcc/ChangeLog
2020-01-14 Kewen Lin <linkw@gcc.gnu.org>
* cfgloopanal.c (average_num_loop_insns): Free bbs when early
return, fix typo on return value.