Aniket Masule [Tue, 24 Sep 2019 05:47:48 +0000 (02:47 -0300)]
media: venus: Add codec data table
Add vpp cycles for different types of codec.
It indicates the cycles required by video hardware
to process each macroblock. Add vsp cycles, cycles
required by stream processor. Initialize the codec
data with core resources.
Signed-off-by: Aniket Masule <amasule@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Stanimir Varbanov [Tue, 17 Sep 2019 12:02:26 +0000 (09:02 -0300)]
media: venus: Fix occasionally failures to suspend
Failure to suspend (venus_suspend_3xx) happens when the system
is fresh booted and loading venus driver. This happens once and
after reload the venus driver modules the problem disrepair.
Fix the failure by skipping the check for WFI and IDLE bits if
PC_READY is on in control status register.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Stanimir Varbanov [Tue, 13 Aug 2019 15:25:08 +0000 (12:25 -0300)]
media: venus: Use on-chip interconnect API
This aims to add a requests for bandwidth scaling depending
on the resolution and framerate (macroblocks per second). The
exact value of the requested bandwidth is get from a
pre-calculated tables for encoder and decoder.
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Loic Poulain [Wed, 11 Sep 2019 14:45:59 +0000 (11:45 -0300)]
media: venus: core: Fix msm8996 frequency table
In downstream driver, there are two frequency tables defined,
one for the encoder and one for the decoder:
/* Encoders /
<972000
490000000 0x55555555>, / 4k UHD @ 30 /
<489600
320000000 0x55555555>, / 1080p @ 60 /
<244800
150000000 0x55555555>, / 1080p @ 30 /
<108000
75000000 0x55555555>, / 720p @ 30 */
/* Decoders /
<1944000
490000000 0xffffffff>, / 4k UHD @ 60 /
< 972000
320000000 0xffffffff>, / 4k UHD @ 30 /
< 489600
150000000 0xffffffff>, / 1080p @ 60 /
< 244800
75000000 0xffffffff>; / 1080p @ 30 */
It shows that encoder always needs a higher clock than decoder.
In current venus driver, the unified frequency table is aligned
with the downstream decoder table which causes performance issues
in encoding scenarios. Fix that by aligning frequency table on
worst case (encoding).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 30 Sep 2019 13:06:44 +0000 (10:06 -0300)]
media: i2c: ov2659: Switch to SPDX Licensing
Switch to SPDX licensing and drop the redundant GPL text.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 30 Sep 2019 13:06:43 +0000 (10:06 -0300)]
media: i2c: ov2659: Fix missing 720p register config
The initial registers sequence is only loaded at probe
time. Afterward only the resolution and format specific
register are modified. Care must be taken to make sure
registers modified by one resolution setting are reverted
back when another resolution is programmed.
This was not done properly for the 720p case.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 30 Sep 2019 13:06:42 +0000 (10:06 -0300)]
media: i2c: ov2659: Add powerdown/reset gpio handling
On some board it is possible that the sensor 'powerdown' and or 'reset'
pin might be controlled by gpio instead of being tied.
To implement we add pm_runtime support which will handle the power
up/down sequence when it is available otherwise the sensor will be
powered on at module insertion/probe and powered off at module removal.
Now originally the driver assumed that the sensor would always stay
powered and keep its register setting. We cannot assume this anymore, so
every time we "power up" we need to re-program the initial registers
configuration first. This was previously done only at probe time.
[Sakari Ailus: Resolve a conflict in Kconfig]
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 30 Sep 2019 13:06:41 +0000 (10:06 -0300)]
media: dt-bindings: ov2659: add powerdown/reset-gpios optional property
Add powerdown-gpios and reset-gpios to the list of optional properties
for the OV2659 camera sensor.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 30 Sep 2019 13:06:40 +0000 (10:06 -0300)]
media: i2c: ov2659: fix s_stream return value
In ov2659_s_stream() return value for invoked function should be checked
and propagated.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 30 Sep 2019 13:06:39 +0000 (10:06 -0300)]
media: i2c: ov2659: Cleanup include file list
Several of include files listed are not explicitly needed.
If they are need then they are implicitly included.
Reduce the list of includes to an easier to manage list.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 30 Sep 2019 13:06:38 +0000 (10:06 -0300)]
media: i2c: ov2659: Fix sensor detection to actually fail when device is not present
Make sure that if the expected sensor device id register
is not recognized properly the failure is propagated
up so devices are not left partially initialized.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Mon, 30 Sep 2019 13:06:37 +0000 (10:06 -0300)]
media: i2c: ov2659: Fix for image wrap-around in lower resolution
Based on recently found sensor configuration examples, it was
discovered that when scaling and binning are used for the lower
resolutions (i.e. 640x480, 320x240) the read offset has to be
increased otherwise the image appears to be wrapped around.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Dongchun Zhu [Fri, 27 Sep 2019 07:18:24 +0000 (04:18 -0300)]
media: i2c: ov5695: Modify the function of async register subdev related devices
This patch adds support for registering a sensor sub-device to the async
sub-device framework and parse set up common sensor related devices such as
actuator/VCM.
[Sakari Ailus: Rewrap commit message]
Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sakari Ailus [Mon, 23 Sep 2019 09:09:46 +0000 (06:09 -0300)]
media: v4l: fwnode: Make v4l2_fwnode_endpoint_free() safer
Assign vep->link_frequencies to NULL after releasing its memory. Without
this change, multiple calls to v4l2_fwnode_endpoint_free() would result in
double kfree calls.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sakari Ailus [Mon, 23 Sep 2019 08:51:24 +0000 (05:51 -0300)]
media: v4l: Put camera sensor, lens and flash drivers under MEDIA_CAMERA_SUPPORT
Instead of individually depending on MEDIA_CAMERA_SUPPORT (or forgetting
it), put all camera sensor, lens and flash drivers under
MEDIA_CAMERA_SUPPORT as a whole. The lens VCM devices didn't use to do
this, but make them depend on MEDIA_CAMERA_SUPPORT as well since there's
no use for these devices without that in practice.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:44 +0000 (17:11 -0300)]
media: ov6650: Fix stored crop rectangle not in sync with hardware
The driver stores crop rectangle settings supposed to be in line with
hardware state in a device private structure. Since the driver initial
submission, crop rectangle width and height settings are not updated
correctly when rectangle offset settings are applied on hardware. If
an error occurs while the device is updated, the stored settings my no
longer reflect hardware state and consecutive calls to .get_selection()
as well as .get/set_fmt() may return incorrect information. That in
turn may affect ability of a bridge device to use correct DMA transfer
settings if such incorrect informamtion on active frame format returned
by .get/set_fmt() is used.
Assuming a failed update of the device means its actual settings haven't
changed, update crop rectangle width and height settings stored in the
device private structure correctly while the rectangle offset is
successfully applied on hardware so the stored values always reflect
actual hardware state to the extent possible.
Fixes:
2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:43 +0000 (17:11 -0300)]
media: ov6650: Fix stored frame format not in sync with hardware
The driver stores frame format settings supposed to be in line with
hardware state in a device private structure. Since the driver initial
submission, those settings are updated before they are actually applied
on hardware. If an error occurs on device update, the stored settings
my not reflect hardware state anymore and consecutive calls to
.get_fmt() may return incorrect information. That in turn may affect
ability of a bridge device to use correct DMA transfer settings if such
incorrect informmation on active frame format returned by .get_fmt() is
used.
Assuming a failed device update means its state hasn't changed, update
frame format related settings stored in the device private structure
only after they are successfully applied so the stored values always
reflect hardware state as closely as possible.
Fixes:
2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:42 +0000 (17:11 -0300)]
media: ov6650: Fix default format not applied on device probe
It is not clear what pixel format is actually configured in hardware on
reset. MEDIA_BUS_FMT_YUYV8_2X8, assumed on device probe since the
driver was intiially submitted, is for sure not the one.
Fix it by explicitly applying a known, driver default frame format just
after initial device reset.
Fixes:
2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:41 +0000 (17:11 -0300)]
media: ov6650: Fix .get_fmt() V4L2_SUBDEV_FORMAT_TRY support
Commit
da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad
op get_fmt") converted a former ov6650_g_fmt() video operation callback
to an ov6650_get_fmt() pad operation callback. However, the converted
function disregards a format->which flag that pad operations should
obey and always returns active frame format settings.
That can be fixed by always responding to V4L2_SUBDEV_FORMAT_TRY with
-EINVAL, or providing the response from a pad config argument, likely
updated by a former user call to V4L2_SUBDEV_FORMAT_TRY .set_fmt().
Since implementation of the latter is trivial, go for it.
Fixes:
da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:40 +0000 (17:11 -0300)]
media: ov6650: Fix some format attributes not under control
User arguments passed to .get/set_fmt() pad operation callbacks may
contain unsupported values. The driver takes control over frame size
and pixel code as well as colorspace and field attributes but has never
cared for remainig format attributes, i.e., ycbcr_enc, quantization
and xfer_func, introduced by commit
11ff030c7365 ("[media]
v4l2-mediabus: improve colorspace support"). Fix it.
Set up a static v4l2_mbus_framefmt structure with attributes
initialized to reasonable defaults and use it for updating content of
user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE,
postpone frame size update, now performed from inside ov6650_s_fmt()
helper, util the user argument is first updated in ov6650_set_fmt() with
default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy
all attributes to pad config, only those handled by the driver, then
fill the response with the default frame format updated with resulting
pad config format code and frame size.
Fixes:
11ff030c7365 ("[media] v4l2-mediabus: improve colorspace support")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:39 +0000 (17:11 -0300)]
media: ov6650: Fix incorrect use of JPEG colorspace
Since its initial submission, the driver selects V4L2_COLORSPACE_JPEG
for supported formats other than V4L2_MBUS_FMT_SBGGR8_1X8. According
to v4l2-compliance test program, V4L2_COLORSPACE_JPEG applies
exclusively to V4L2_PIX_FMT_JPEG. Since the sensor does not support
JPEG format, fix it to always select V4L2_COLORSPACE_SRGB.
Fixes:
2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:38 +0000 (17:11 -0300)]
media: ov6650: Fix crop rectangle alignment not passed back
Commit
4f996594ceaf ("[media] v4l2: make vidioc_s_crop const")
introduced a writable copy of constified user requested crop rectangle
in order to be able to perform hardware alignments on it. Later
on, commit
10d5509c8d50 ("[media] v4l2: remove g/s_crop from video
ops") replaced s_crop() video operation using that const argument with
set_selection() pad operation which had a corresponding argument not
constified, however the original behavior of the driver was not
restored. Since that time, any hardware alignment applied on a user
requested crop rectangle is not passed back to the user calling
.set_selection() as it should be.
Fix the issue by dropping the copy and replacing all references to it
with references to the crop rectangle embedded in the user argument.
Fixes:
10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:37 +0000 (17:11 -0300)]
media: ov6650: Fix control handler not freed on init error
Since commit
afd9690c72c3 ("[media] ov6650: convert to the control
framework"), if an error occurs during initialization of a control
handler, resources possibly allocated to the handler are not freed
before device initialiaton is aborted. Fix it.
Fixes:
afd9690c72c3 ("[media] ov6650: convert to the control framework")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:36 +0000 (17:11 -0300)]
media: ov6650: Fix MODULE_DESCRIPTION
Commit
23a52386fabe ("media: ov6650: convert to standalone v4l2
subdevice") converted the driver from a soc_camera sensor to a
standalone V4L subdevice driver. Unfortunately, module description was
not updated to reflect the change. Fix it.
While being at it, update email address of the module author.
Fixes:
23a52386fabe ("media: ov6650: convert to standalone v4l2 subdevice")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
YueHaibing [Tue, 3 Sep 2019 12:09:45 +0000 (09:09 -0300)]
media: max2175: Fix build error without CONFIG_REGMAP_I2C
If CONFIG_REGMAP_I2C is not set, building fails:
drivers/media/i2c/max2175.o: In function `max2175_probe':
max2175.c:(.text+0x1404): undefined reference to `__devm_regmap_init_i2c'
Select REGMAP_I2C to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
b47b79d8a231 ("[media] media: i2c: max2175: Add MAX2175 support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 5 Sep 2019 11:31:11 +0000 (08:31 -0300)]
media: cx231xx: convert to the vb2 framework
This patch converts the cx231xx driver to the vb2 framework.
Since you can't do a partial conversion this is a big-bang patch,
i.e. large and hard to review. I never found a way around this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Co-developed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 19 Sep 2019 11:15:53 +0000 (08:15 -0300)]
media: cec-gpio: add notifier support
Add support for cec-notifier to the cec-gpio driver.
This makes it possible to associate the CEC gpio pin with an HDMI
connector. This feature was always documented in the cec-gpio bindings:
Documentation/devicetree/bindings/media/cec-gpio.txt
But support for the hdmi-phandle property was never actually implemented in
this driver.
This patch adds support for this property.
It also fixes a few incorrect error returns in the probe() function, which
skipped the call to cec_delete_adapter().
Tested on a Raspberry Pi 3B with a modified vc4 driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Dariusz Marcinkiewicz [Fri, 23 Aug 2019 12:20:59 +0000 (09:20 -0300)]
media: cec: document CEC_ADAP_G_CONNECTOR_INFO and capability
Document the new CEC_ADAP_G_CONNECTOR_INFO ioctl and the new
CEC_CAP_CONNECTOR_INFO capability.
Co-developed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: added CEC_CAP_CONNECTOR_INFO]
[hverkuil-cisco@xs4all.nl: added DQEVENT have_conn_info]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Dariusz Marcinkiewicz [Fri, 23 Aug 2019 12:20:58 +0000 (09:20 -0300)]
media: cec: expose the new connector info API
Until now the connector info API was a kernel-internal API only.
This moves it to the public API and adds the new ioctl to retrieve
this information.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 16 Sep 2019 05:47:41 +0000 (02:47 -0300)]
media: cec.h: CEC_OP_REC_FLAG_ values were swapped
CEC_OP_REC_FLAG_NOT_USED is 0 and CEC_OP_REC_FLAG_USED is 1, not the
other way around.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Jiunn Chang <c0d1n61at3@gmail.com>
Cc: <stable@vger.kernel.org> # for v4.10 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 5 Sep 2019 07:33:40 +0000 (04:33 -0300)]
media: cec/cec-adap.c: use new UI_CMD defines
Instead of hardcoding the UI Command key values, use the new
defines.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 5 Sep 2019 07:33:39 +0000 (04:33 -0300)]
media: uapi/linux/cec.h: add defines for the CEC UI Command Operand
These defines were never added to this CEC header, likely due
to laziness on the part of the original author, i.e. me.
But it is useful to have them, so add them.
Also update the cec.h.rst.exceptions file to avoid errors when
building the documentation.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Philipp Zabel [Thu, 12 Sep 2019 16:01:20 +0000 (13:01 -0300)]
media: imx: enable V4L2_PIX_FMT_XBGR32, _BGRX32, and _RGBX32
Now that proper V4L2 pixel formats exist for all 32-bit RGB
permutations, drop support for the poorly defined legacy format
V4L2_PIX_FMT_BGR32.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Philipp Zabel [Tue, 10 Sep 2019 10:22:39 +0000 (07:22 -0300)]
media: uapi: h264: clarify num_ref_idx_l[01]_(default_)active fields
Since the uapi does not contain the num_ref_idx_active_override_flag,
drivers for decoders that do not parse slices themselves don't know
how to choose between the num_ref_idx_l[01]_default_active and the
num_ref_idx_l[01]_active override fields.
Instead, userspace must set the override fields to the default values
if the slice does not have the num_ref_idx_active_override flag set.
The drivers will then always enable the override internally and ignore
the default fields completely.
Clarify this requirement in the API documentation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Philipp Zabel [Tue, 10 Sep 2019 10:20:30 +0000 (07:20 -0300)]
media: uapi: h264: clarify V4L2_PIX_FMT_H264_SLICE format
Document that the slice headers must be included for the benefit of
decoders that parse them (partially) in hardware, and that the start
code is optional. Add a link to the ITU-T Rec. H.264 specification
section that describes the slice format.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Boris Brezillon [Mon, 9 Sep 2019 07:28:15 +0000 (04:28 -0300)]
media: hantro: h264: Fix the frame_num wraparound case
Step '8.2.4.1 Decoding process for picture numbers' was missing in the
reflist creation logic, leading to invalid P reflists when a
->frame_num wraparound happens.
Fixes:
a9471e25629b ("media: hantro: Add core bits to support H264 decoding")
Reported-by: Francois Buergisser <fbuergisser@google.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Francois Buergisser <fbuergisser@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Boris Brezillon [Mon, 9 Sep 2019 07:28:14 +0000 (04:28 -0300)]
media: hantro: h264: Rename POC_CMP() into HANTRO_CMP()
And use it for all native type comparisons, even if it's not strictly
required. By doing that we make the code more consistent and prevent
from potential incorrect results in case of overflow or when the the
values being compared are both negative.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Francois Buergisser <fbuergisser@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Boris Brezillon [Mon, 9 Sep 2019 07:28:13 +0000 (04:28 -0300)]
media: hantro: h264: Fix a comment in b1_ref_list_cmp()
So it matches the code and the spec.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Francois Buergisser <fbuergisser@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Niklas Söderlund [Wed, 4 Sep 2019 21:54:08 +0000 (18:54 -0300)]
media: rcar-vin: Add support for V4L2_FIELD_ALTERNATE
The hardware is capable to passing V4L2_FIELD_ALTERNATE to user-space.
Allow users to request this field format but still default to using the
hardware interlacer if alternating is not explicitly requested.
Before this change a sensor providing data using alternate would be
always combined to an interlaced frame. After this change the user can
request to receive frames as alternate if the sensor provides it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Niklas Söderlund [Wed, 4 Sep 2019 21:54:07 +0000 (18:54 -0300)]
media: rcar-vin: Do not reset the crop and compose rectangles in s_fmt
The crop and compose rectangles are reset when s_fmt is called
resulting in potentially valid rectangles being lost when updating the
format. Fix this by mapping the rectangles inside the new format.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Niklas Söderlund [Wed, 4 Sep 2019 21:54:06 +0000 (18:54 -0300)]
media: rcar-vin: Rename rectangle holding the video source information
The variable to hold the video source information dimensions was poorly
named 'source'. This is confusing as a lot of other members of structs
share the same name with different purposes, rename it src_rect in
preparation of refactoring code.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Niklas Söderlund [Wed, 4 Sep 2019 21:54:05 +0000 (18:54 -0300)]
media: rcar-vin: Make use of V4L2_FIELD_IS_INTERLACED() macro
The V4L2_FIELD_IS_INTERLACED() can be used to make the code more
readable, use it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Niklas Söderlund [Wed, 4 Sep 2019 21:54:04 +0000 (18:54 -0300)]
media: rcar-vin: Fix incorrect return statement in rvin_try_format()
While refactoring code the return statement became corrupted, fix it by
returning the correct return code.
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Fixes:
897e371389e77514 ("media: rcar-vin: simplify how formats are set and reset"
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ezequiel Garcia [Tue, 3 Sep 2019 18:17:09 +0000 (15:17 -0300)]
media: hantro: Simplify buffer helpers
Modify hantro_get_ref() and hantro_h264_get_ref_buf() helpers
to return the buffer DMA address, this makes the code simpler
and at the same time will allow easier enablement of the
post-processing feature.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ezequiel Garcia [Tue, 3 Sep 2019 18:17:08 +0000 (15:17 -0300)]
media: hantro: Simplify macroblock macros
It seems all codecs are using a 16x16 size macroblock,
and so it's possible to have just one set of macroblock macros.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Wed, 25 Sep 2019 14:09:37 +0000 (11:09 -0300)]
media: vidioc-g-fbuf.rst: remove duplicate 'struct'
"struct struct" -> "struct"
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jernej Skrabec [Thu, 12 Sep 2019 18:55:55 +0000 (15:55 -0300)]
media: vim2m: Fix abort issue
Currently, if start streaming -> stop streaming -> start streaming
sequence is executed, driver will end job prematurely, if ctx->translen
is higher than 1, because "aborting" flag is still set from previous
stop streaming command.
Fix that by clearing "aborting" flag in start streaming handler.
Fixes:
96d8eab5d0a1 ("V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Vandana BN [Mon, 9 Sep 2019 09:43:31 +0000 (06:43 -0300)]
media: vivid: Set vid_cap_streaming and vid_out_streaming to true
When vbi stream is started, followed by video streaming,
the vid_cap_streaming and vid_out_streaming were not being set to true,
which would cause the video stream to stop when vbi stream is stopped.
This patch allows to set vid_cap_streaming and vid_out_streaming to true.
According to Hans Verkuil it appears that these 'if (dev->kthread_vid_cap)'
checks are a left-over from the original vivid development and should never
have been there.
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Cc: <stable@vger.kernel.org> # for v3.18 and up
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 9 Sep 2019 07:16:27 +0000 (04:16 -0300)]
media: v4l2-dv-timings.c: fix format string
It should be "%u.%02u" instead of "%u.%u".
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Bard Winther <bwinther@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kefeng Wang [Sun, 8 Sep 2019 04:12:54 +0000 (01:12 -0300)]
media: vim2m: Fix BUG_ON in vim2m_device_release()
If v4l2_m2m_init() fails, m2m_dev pointer will be set ERR_PTR(-ENOMEM),
then kfree m2m_dev will trigger BUG_ON, see below, fix it by setting m2m_dev
to NULL.
vim2m vim2m.0: Failed to init mem2mem device
------------[ cut here ]------------
kernel BUG at mm/slub.c:3944!
invalid opcode: 0000 [#1] SMP PTI
CPU: 11 PID: 9061 Comm: insmod Tainted: G E 5.2.0-rc2 #81
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:kfree+0x11a/0x160
Call Trace:
vim2m_device_release+0x3f/0x50 [vim2m]
device_release+0x27/0x80
kobject_release+0x68/0x190
vim2m_probe+0x20f/0x280 [vim2m]
platform_drv_probe+0x37/0x90
really_probe+0xef/0x3d0
driver_probe_device+0x110/0x120
device_driver_attach+0x4f/0x60
__driver_attach+0x9a/0x140
? device_driver_attach+0x60/0x60
bus_for_each_dev+0x76/0xc0
? klist_add_tail+0x57/0x70
bus_add_driver+0x141/0x210
driver_register+0x5b/0xe0
vim2m_init+0x29/0x1000 [vim2m]
do_one_initcall+0x46/0x1f4
? __slab_alloc+0x1c/0x30
? kmem_cache_alloc_trace+0x167/0x1b0
do_init_module+0x5b/0x21f
load_module+0x1add/0x1fb0
? __do_sys_finit_module+0xe9/0x110
__do_sys_finit_module+0xe9/0x110
do_syscall_64+0x5b/0x1c0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
ea6c7e34f3b2 ("media: vim2m: replace devm_kzalloc by kzalloc")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Alexandre Courbot [Fri, 6 Sep 2019 11:55:03 +0000 (08:55 -0300)]
media: mtk-vcodec: vdec: clean up vidioc_vdec_s_fmt a bit
Check for a potentially NULL pointer that was overlooked and use shorter
accessors to the same data. While we are at it, sprinkle a few comments.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Alexandre Courbot [Fri, 6 Sep 2019 11:55:02 +0000 (08:55 -0300)]
media: mtk-vcodec: vdec: set VPI IPI handler in one place
Each of the supported decoder formats used to set the same RPC
interrupt handler by themselves, even though this could be done
by the IF init function itself. Move it to the right place and stop
making its symbol public.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Yunfei Dong [Fri, 6 Sep 2019 11:55:01 +0000 (08:55 -0300)]
media: mtk-vcodec: vdec: fix incorrect pointer dereference
mtk_q_data::fmt is actually a pointer and must be dereferenced as such.
This went under the radar because mtk_v4l2_debug() evaluates to nothing
unless DEBUG is defined.
[acourbot: split into its own commit]
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Fri, 6 Sep 2019 08:58:39 +0000 (05:58 -0300)]
media: em28xx: make various arrays static const, makes object smaller
Don't populate the arrays on the stack but instead make them
static const. Makes the object code smaller by 767 bytes.
Before:
text data bss dec hex filename
41567 15088 192 56847 de0f em28xx/em28xx-dvb.o
After:
text data bss dec hex filename
39872 16016 192 56080 db10 em28xx/em28xx-dvb.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Fri, 6 Sep 2019 08:11:33 +0000 (05:11 -0300)]
media: s3c-camif: make array 'registers' static const, makes object smaller
Don't populate the array 'registers' on the stack but instead make it
static const. Makes the object code smaller by 45 bytes.
Before:
text data bss dec hex filename
17364 5000 0 22364 575c platform/s3c-camif/camif-regs.o
After:
text data bss dec hex filename
17255 5064 0 22319 572f platform/s3c-camif/camif-regs.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Philipp Zabel [Thu, 5 Sep 2019 13:12:54 +0000 (10:12 -0300)]
media: uapi: h264: clarify dec_ref_pic_marking_bit_size fields
Since dec_ref_pic_marking_bit_size is not a syntax element
itself, explicitly state that this is the size in bits of
the dec_ref_pic_marking() syntax element contained in the
slice.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Philipp Zabel [Thu, 5 Sep 2019 10:25:54 +0000 (07:25 -0300)]
media: hantro: streamline open, reuse error path
This adds a label to the error path to avoid calling
v4l2_m2m_ctx_init() and kfree(ctx) in two places each.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Sun, 1 Sep 2019 10:09:21 +0000 (07:09 -0300)]
media: ext-ctrls-flash.rst: fix typo
to synchronises -> to synchronise
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Christophe JAILLET [Sat, 31 Aug 2019 06:42:58 +0000 (03:42 -0300)]
media: seco-cec: Add a missing 'release_region()' in an error handling path
At the beginning of the probe function, we have a call to
'request_muxed_region(BRA_SMB_BASE_ADDR, 7, "
CEC00001")()'
A corresponding 'release_region()' is performed in the remove function but
is lacking in the error handling path.
Add it.
Fixes:
b03c2fb97adc ("media: add SECO cec driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Fri, 30 Aug 2019 09:26:24 +0000 (06:26 -0300)]
media: cedrus: fix various format-related compliance issues
Initialize the context on open() with valid capture and output
formats. It is good practice to always have valid formats internally.
This solves one vb2 warning in the kernel log where the sizeimage
value of the output format was 0 when requesting buffers, which is
not allowed.
It also simplifies the g_fmt ioctl implementations since they no longer
have to check if a valid format was ever set.
cedrus_prepare_format() now also validates sizeimage for the output
formats, ensuring userspace can't set it to 0 since that would cause
the same vb2 warning.
Finally remove the sizeimage == 0 check in cedrus_try_fmt_vid_out()
since cedrus_prepare_format() will now adjust this value.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Fri, 30 Aug 2019 09:26:23 +0000 (06:26 -0300)]
media: cedrus: choose default pixelformat in try_fmt
If an unsupported pixelformat is passed to try_fmt, then pick
the first valid pixelformat instead. This is more standard V4L2
behavior.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Fri, 30 Aug 2019 09:26:22 +0000 (06:26 -0300)]
media: cedrus: fill in bus_info for media device
Fixes this compliance warning:
$ v4l2-compliance -m0
v4l2-compliance SHA:
b514d615166bdc0901a4c71261b87db31e89f464, 32 bits
Compliance test for cedrus device /dev/media0:
Media Driver Info:
Driver name : cedrus
Model : cedrus
Serial :
Bus info :
Media version : 5.3.0
Hardware revision: 0x00000000 (0)
Driver version : 5.3.0
Required ioctls:
warn: v4l2-test-media.cpp(51): empty bus_info
test MEDIA_IOC_DEVICE_INFO: OK
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:53 +0000 (14:05 -0300)]
media: am437x-vpfe: Switch to SPDX Licensing
Switch to SPDX licensing and drop the redundant GPL text.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:52 +0000 (14:05 -0300)]
media: am437x-vpfe: Remove per bus width static data
The bus related static data included in the vpfe_fmt
static table can be derived dynamically instead.
This simplify the table and it's use.
We instead replace the per bus data info with just
the usual bit per pixel value for each supported
pixel format.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:51 +0000 (14:05 -0300)]
media: am437x-vpfe: TRY_FMT ioctl is not really trying anything
The try_fmt was not actually trying out the provided format
but merely returning the current format basically like get_fmt.
In addition set_fmt should first invoked try_fmt to validate the
given format before applying it to the hardware.
To fix all of these the whole get/try/set ioctl functions had to
be reworked.
When calculating the bytesperline/stride and sizeimage format
member we don't need to locally store the current value of
bytesperpixel as it can easily get derived dynamically.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:50 +0000 (14:05 -0300)]
media: am437x-vpfe: fix function trace debug log
checkpatch.pl nows reports several:
WARNING: Prefer using '"%s...", __func__' to using '<function name>',
this function's name, in a string.
So fix these for the whole driver.
At the same time remove the function entry trace log as those can be
enabled using ftrace instead.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:49 +0000 (14:05 -0300)]
media: am437x-vpfe: Use a per instance format array instead of a static one
Using a statically defined format array would cause issue when
multiple vpfe instance would be connected to sub-device of
different capabilities. We need to use an instance based array
instead to properly maintain a per port/instance format list.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:48 +0000 (14:05 -0300)]
media: am437x-vpfe: Setting STD to current value is not an error
VIDIOC_S_STD should not return an error if the value is identical
to the current one.
This error was highlighted by the v4l2-compliance test.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:47 +0000 (14:05 -0300)]
media: am437x-vpfe: Streamlined vb2 buffer cleanup
Returning queued vb2 buffers back to user space is a common
task best handled by a helper function.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:46 +0000 (14:05 -0300)]
media: am437x-vpfe: fix start streaming error path
When start_streaming fails the h/w module might be left enabled
inadvertently. Make sure it is disabled in the error path.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:45 +0000 (14:05 -0300)]
media: am437x-vpfe: Wait for end of frame before tear-down
We were originally attempting to stop all processing as soon
as possible, but the in-progress DMA operation cannot be canceled.
This led to the module being in a busy state and prevented proper
power management functionality.
The existing implementation would attempt to clean things up by waiting
up to 50ms. However when receiving video frame at 15fps or lower,
it meant an inter frame arrival rate of 66.6 ms or higher.
In such cases upon tear down the following message could be seen:
omap_hwmod: vpfe0: _wait_target_disable failed
This patch fixes this issue by adding a stopping state where
we would wait for the next Vsync before disabling the hardware.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:44 +0000 (14:05 -0300)]
media: am437x-vpfe: Rework ISR routine for clarity
Make the ISR code simpler to follow by removing goto and
relocating/eliminating duplicate spinlock accesses.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:43 +0000 (14:05 -0300)]
media: am437x-vpfe: Fix missing first line
Previous generation of this driver were hard coded to handle
encoder/decoder where the first line never contains any data and
was therefore always skipped, however when dealing with actual
camera sensors the first line is always present.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Dave Gerlach [Fri, 20 Sep 2019 17:05:42 +0000 (14:05 -0300)]
media: am437x-vpfe: Fix suspend path to always handle pinctrl config
Currently if vpfe is not active then it returns immediately in the
suspend and resume handlers. Change this so that it always performs the
pinctrl config so that we can still get proper sleep state configuration
on the pins even if we do not need to worry about fully saving and
restoring context.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Shuah Khan [Tue, 17 Sep 2019 16:35:12 +0000 (13:35 -0300)]
media: MAINTAINERS: Add reviewer to vimc driver
After practically re-writing the driver to collpase it into a monolith,
I am adding myself as a reviewer for vimc driver.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Shuah Khan [Tue, 17 Sep 2019 16:35:11 +0000 (13:35 -0300)]
media: doc: media: vimc: Update module parameter usage information
vimc driver is now a monolithic driver. Update the module parameter
usage information to reflect that.
[m.chehab+samsung@kernel.org: fix two warnings due to wrontly added spaces]
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Shuah Khan [Tue, 17 Sep 2019 16:35:10 +0000 (13:35 -0300)]
media: vimc: move duplicated IS_SRC and IS_SINK to common header
Move duplicated IS_SRC and IS_SINK dfines to common header. Rename
them to VIMC_IS_SRC and VIM_IS_SINK.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Shuah Khan [Tue, 17 Sep 2019 16:35:09 +0000 (13:35 -0300)]
media: vimc: Fix gpf in rmmod path when stream is active
If vimc module is removed while streaming is in progress, sensor subdev
unregister runs into general protection fault when it tries to unregister
media entities. This is a common subdev problem related to releasing
pads from v4l2_device_unregister_subdev() before calling unregister.
Unregister references pads during unregistering subdev.
The sd release handler is the right place for releasing all sd resources
including pads. The release handlers currently release all resources
except the pads.
Fix v4l2_device_unregister_subdev() not release pads and release pads
from the sd_int_op release handlers.
kernel: [ 4136.715839] general protection fault: 0000 [#1] SMP PTI
kernel: [ 4136.715847] CPU: 2 PID: 1972 Comm: bash Not tainted 5.3.0-rc2+ #4
kernel: [ 4136.715850] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013
kernel: [ 4136.715858] RIP: 0010:media_gobj_destroy.part.16+0x1f/0x60
kernel: [ 4136.715863] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 fe 48 89 e5 53 48 89 fb 48 c7 c7 00 7f cf b0 e8 24 fa ff ff 48 8b 03 <48> 83 80 a0 00 00 00 01 48 8b 43 18 48 8b 53 10 48 89 42 08 48 89
kernel: [ 4136.715866] RSP: 0018:
ffff9b2248fe3cb0 EFLAGS:
00010246
kernel: [ 4136.715870] RAX:
bcf2bfbfa0d63c2f RBX:
ffff88c3eb37e9c0 RCX:
00000000802a0018
kernel: [ 4136.715873] RDX:
ffff88c3e4f6a078 RSI:
ffff88c3eb37e9c0 RDI:
ffffffffb0cf7f00
kernel: [ 4136.715876] RBP:
ffff9b2248fe3cb8 R08:
0000000001000002 R09:
ffffffffb0492b00
kernel: [ 4136.715879] R10:
ffff9b2248fe3c28 R11:
0000000000000001 R12:
0000000000000038
kernel: [ 4136.715881] R13:
ffffffffc09a1628 R14:
ffff88c3e4f6a028 R15:
fffffffffffffff2
kernel: [ 4136.715885] FS:
00007f8389647740(0000) GS:
ffff88c465500000(0000) knlGS:
0000000000000000
kernel: [ 4136.715888] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
kernel: [ 4136.715891] CR2:
000055d008f80fd8 CR3:
00000001996ec005 CR4:
00000000000606e0
kernel: [ 4136.715894] Call Trace:
kernel: [ 4136.715903] media_gobj_destroy+0x14/0x20
kernel: [ 4136.715908] __media_device_unregister_entity+0xb3/0xe0
kernel: [ 4136.715915] media_device_unregister_entity+0x30/0x40
kernel: [ 4136.715920] v4l2_device_unregister_subdev+0xa8/0xe0
kernel: [ 4136.715928] vimc_ent_sd_unregister+0x1e/0x30 [vimc]
kernel: [ 4136.715933] vimc_sen_rm+0x16/0x20 [vimc]
kernel: [ 4136.715938] vimc_remove+0x3e/0xa0 [vimc]
kernel: [ 4136.715945] platform_drv_remove+0x25/0x50
kernel: [ 4136.715951] device_release_driver_internal+0xe0/0x1b0
kernel: [ 4136.715956] device_driver_detach+0x14/0x20
kernel: [ 4136.715960] unbind_store+0xd1/0x130
kernel: [ 4136.715965] drv_attr_store+0x27/0x40
kernel: [ 4136.715971] sysfs_kf_write+0x48/0x60
kernel: [ 4136.715976] kernfs_fop_write+0x128/0x1b0
kernel: [ 4136.715982] __vfs_write+0x1b/0x40
kernel: [ 4136.715987] vfs_write+0xc3/0x1d0
kernel: [ 4136.715993] ksys_write+0xaa/0xe0
kernel: [ 4136.715999] __x64_sys_write+0x1a/0x20
kernel: [ 4136.716005] do_syscall_64+0x5a/0x130
kernel: [ 4136.716010] entry_SYSCALL_64_after_hwframe+0x4
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Shuah Khan [Tue, 17 Sep 2019 16:35:08 +0000 (13:35 -0300)]
media: vimc: Collapse component structure into a single monolithic driver
vimc uses Component API to split the driver into functional components.
The real hardware resembles a monolith structure than component and
component structure added a level of complexity making it hard to
maintain without adding any real benefit.
The sensor is one vimc component that would makes sense to be a separate
module to closely align with the real hardware. It would be easier to
collapse vimc into single monolithic driver first and then split the
sensor off as a separate module.
Collapse it into a single monolithic driver removing the Component API.
This patch removes the component API and makes minimal changes to the
code base preserving the functional division of the code structure.
Preserving the functional structure allows us to split the sensor off
as a separate module in the future.
Major design elements in this change are:
- Use existing struct vimc_ent_config and struct vimc_pipeline_config
to drive the initialization of the functional components.
- Make vimc_device and vimc_ent_config global by moving them to
vimc-common.h
- Add two new hooks add and rm to initialize and register, unregister
and free subdevs.
- All component API is now gone and bind and unbind hooks are modified
to do "add" and "rm" with minimal changes to just add and rm subdevs.
- vimc-core's bind and unbind are now register and unregister.
- Add a new field to vimc_device structure for saving the pointers to
struct vimc_ent_device(s) subdevs create in their "add" hooks. These
get used to create links and removing the subdevs. vimc-core allocates
this array which sized to number of entries in the topology defined in
the vimc_pipeline_config structure.
- vimc-core invokes "add" hooks from its vimc_register_devices().
The "add" hooks remain the same and register subdevs. They don't
create platform devices of their own and use vimc's pdev.dev as
their reference device. Each "add" hook returns pointer to its struct
vimc_ent_device. This is saved in the vimc_device ent_devs array.
- vimc-core invokes "rm" hooks from its unregister to unregister subdevs
and cleanup.
- vimc-core invokes "add" and "rm" hooks with pointer to struct vimc_device
and the corresponding vimc_ent_device saved in the ent_devs.
The following configure and stream test works on all devices.
media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2
v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
zhengbin [Mon, 19 Aug 2019 01:51:30 +0000 (22:51 -0300)]
media: mc-device.c: fix memleak in media_device_register_entity
In media_device_register_entity, if media_graph_walk_init fails,
need to free the previously memory.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Thu, 5 Sep 2019 18:05:32 +0000 (15:05 -0300)]
media: i2c: mt9m001: make array init_regs static, makes object smaller
Don't populate the array init_regs on the stack but instead make it
static. Makes the object code smaller by 57 bytes.
Before:
text data bss dec hex filename
15935 3600 128 19663 4ccf drivers/media/i2c/mt9m001.o
After:
text data bss dec hex filename
15782 3696 128 19606 4c96 drivers/media/i2c/mt9m001.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Linus Torvalds [Mon, 30 Sep 2019 17:35:40 +0000 (10:35 -0700)]
Linux 5.4-rc1
Linus Torvalds [Mon, 30 Sep 2019 17:25:24 +0000 (10:25 -0700)]
Merge tag 'for-5.4-rc1-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A bunch of fixes that accumulated in recent weeks, mostly material for
stable.
Summary:
- fix for regression from 5.3 that prevents to use balance convert
with single profile
- qgroup fixes: rescan race, accounting leak with multiple writers,
potential leak after io failure recovery
- fix for use after free in relocation (reported by KASAN)
- other error handling fixups"
* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
btrfs: Fix a regression which we can't convert to SINGLE profile
btrfs: relocation: fix use-after-free on dead relocation roots
Btrfs: fix race setting up and completing qgroup rescan workers
Btrfs: fix missing error return if writeback for extent buffer never started
btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
Btrfs: fix selftests failure due to uninitialized i_mode in test inodes
Linus Torvalds [Mon, 30 Sep 2019 17:16:17 +0000 (10:16 -0700)]
Merge tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux
Pull csky updates from Guo Ren:
"This round of csky subsystem just some fixups:
- Fix mb() synchronization problem
- Fix dma_alloc_coherent with PAGE_SO attribute
- Fix cache_op failed when cross memory ZONEs
- Optimize arch_sync_dma_for_cpu/device with dma_inv_range
- Fix ioremap function losing
- Fix arch_get_unmapped_area() implementation
- Fix defer cache flush for 610
- Support kernel non-aligned access
- Fix 610 vipt cache flush mechanism
- Fix add zero_fp fixup perf backtrace panic
- Move static keyword to the front of declaration
- Fix csky_pmu.max_period assignment
- Use generic free_initrd_mem()
- entry: Remove unneeded need_resched() loop"
* tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux:
csky: Move static keyword to the front of declaration
csky: entry: Remove unneeded need_resched() loop
csky: Fixup csky_pmu.max_period assignment
csky: Fixup add zero_fp fixup perf backtrace panic
csky: Use generic free_initrd_mem()
csky: Fixup 610 vipt cache flush mechanism
csky: Support kernel non-aligned access
csky: Fixup defer cache flush for 610
csky: Fixup arch_get_unmapped_area() implementation
csky: Fixup ioremap function losing
csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range
csky/dma: Fixup cache_op failed when cross memory ZONEs
csky: Fixup dma_alloc_coherent with PAGE_SO attribute
csky: Fixup mb() synchronization problem
Linus Torvalds [Mon, 30 Sep 2019 17:04:28 +0000 (10:04 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A few fixes that have trickled in through the merge window:
- Video fixes for OMAP due to panel-dpi driver removal
- Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7
- Fixing arch version on ASpeed ast2500
- Two fixes for reset handling on ARM SCMI"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: aspeed: ast2500 is ARMv6K
reset: reset-scmi: add missing handle initialisation
firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
ARM: dts: am3517-evm: Fix missing video
ARM: dts: logicpd-torpedo-baseboard: Fix missing video
ARM: omap2plus_defconfig: Fix missing video
bus: ti-sysc: Fix handling of invalid clocks
bus: ti-sysc: Fix clock handling for no-idle quirks
Linus Torvalds [Mon, 30 Sep 2019 16:29:53 +0000 (09:29 -0700)]
Merge tag 'trace-v5.4-3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few more tracing fixes:
- Fix a buffer overflow by checking nr_args correctly in probes
- Fix a warning that is reported by clang
- Fix a possible memory leak in error path of filter processing
- Fix the selftest that checks for failures, but wasn't failing
- Minor clean up on call site output of a memory trace event"
* tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests/ftrace: Fix same probe error test
mm, tracing: Print symbol name for call_site in trace events
tracing: Have error path in predicate_parse() free its allocated memory
tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro
tracing/probe: Fix to check the difference of nr_args before adding probe
Linus Torvalds [Mon, 30 Sep 2019 16:21:53 +0000 (09:21 -0700)]
Merge tag 'mmc-v5.4-2' of git://git./linux/kernel/git/ulfh/mmc
Pull more MMC updates from Ulf Hansson:
"A couple more updates/fixes for MMC:
- sdhci-pci: Add Genesys Logic GL975x support
- sdhci-tegra: Recover loss in throughput for DMA
- sdhci-of-esdhc: Fix DMA bug"
* tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: host: sdhci-pci: Add Genesys Logic GL975x support
mmc: tegra: Implement ->set_dma_mask()
mmc: sdhci: Let drivers define their DMA mask
mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
mmc: sdhci: improve ADMA error reporting
Krzysztof Wilczynski [Tue, 3 Sep 2019 11:36:51 +0000 (13:36 +0200)]
csky: Move static keyword to the front of declaration
Move the static keyword to the front of declaration of
csky_pmu_of_device_ids, and resolve the following compiler
warning that can be seen when building with warnings
enabled (W=1):
arch/csky/kernel/perf_event.c:1340:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Valentin Schneider [Mon, 23 Sep 2019 14:36:14 +0000 (15:36 +0100)]
csky: entry: Remove unneeded need_resched() loop
Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Linus Torvalds [Mon, 30 Sep 2019 02:52:52 +0000 (19:52 -0700)]
Merge tag 'char-misc-5.4-rc1' of git://git./linux/kernel/git/gregkh/char-misc
Pull Documentation/process update from Greg KH:
"Here are two small Documentation/process/embargoed-hardware-issues.rst
file updates that missed my previous char/misc pull request.
The first one adds an Intel representative for the process, and the
second one cleans up the text a bit more when it comes to how the
disclosure rules work, as it was a bit confusing to some companies"
* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/process: Clarify disclosure rules
Documentation/process: Volunteer as the ambassador for Intel
Linus Torvalds [Mon, 30 Sep 2019 02:42:07 +0000 (19:42 -0700)]
Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
"A couple of misc patches"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs dynroot: switch to simple_dir_operations
fs/handle.c - fix up kerneldoc
Linus Torvalds [Mon, 30 Sep 2019 02:37:32 +0000 (19:37 -0700)]
Merge tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
"Fixes from the recent SMB3 Test events and Storage Developer
Conference (held the last two weeks).
Here are nine smb3 patches including an important patch for debugging
traces with wireshark, with three patches marked for stable.
Additional fixes from last week to better handle some newly discovered
reparse points, and a fix the create/mkdir path for setting the mode
more atomically (in SMB3 Create security descriptor context), and one
for path name processing are still being tested so are not included
here"
* tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Fix oplock handling for SMB 2.1+ protocols
smb3: missing ACL related flags
smb3: pass mode bits into create calls
smb3: Add missing reparse tags
CIFS: fix max ea value size
fs/cifs/sess.c: Remove set but not used variable 'capabilities'
fs/cifs/smb2pdu.c: Make SMB2_notify_init static
smb3: fix leak in "open on server" perf counter
smb3: allow decryption keys to be dumped by admin for debugging
Mao Han [Wed, 25 Sep 2019 09:23:02 +0000 (17:23 +0800)]
csky: Fixup csky_pmu.max_period assignment
The csky_pmu.max_period has type u64, and BIT() can only return
32 bits unsigned long on C-SKY. The initialization for max_period
will be incorrect when count_width is bigger than 32.
Use BIT_ULL()
Signed-off-by: Mao Han <han_mao@c-sky.com>
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Guo Ren [Wed, 25 Sep 2019 11:56:16 +0000 (19:56 +0800)]
csky: Fixup add zero_fp fixup perf backtrace panic
We need set fp zero to let backtrace know the end. The patch fixup perf
callchain panic problem, because backtrace didn't know what is the end
of fp.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reported-by: Mao Han <han_mao@c-sky.com>
Mike Rapoport [Wed, 28 Aug 2019 13:35:19 +0000 (16:35 +0300)]
csky: Use generic free_initrd_mem()
The csky implementation of free_initrd_mem() is an open-coded version of
free_reserved_area() without poisoning.
Remove it and make csky use the generic version of free_initrd_mem().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Linus Torvalds [Mon, 30 Sep 2019 02:25:39 +0000 (19:25 -0700)]
Merge branch 'entropy'
Merge active entropy generation updates.
This is admittedly partly "for discussion". We need to have a way
forward for the boot time deadlocks where user space ends up waiting for
more entropy, but no entropy is forthcoming because the system is
entirely idle just waiting for something to happen.
While this was triggered by what is arguably a user space bug with
GDM/gnome-session asking for secure randomness during early boot, when
they didn't even need any such truly secure thing, the issue ends up
being that our "getrandom()" interface is prone to that kind of
confusion, because people don't think very hard about whether they want
to block for sufficient amounts of entropy.
The approach here-in is to decide to not just passively wait for entropy
to happen, but to start actively collecting it if it is missing. This
is not necessarily always possible, but if the architecture has a CPU
cycle counter, there is a fair amount of noise in the exact timings of
reasonably complex loads.
We may end up tweaking the load and the entropy estimates, but this
should be at least a reasonable starting point.
As part of this, we also revert the revert of the ext4 IO pattern
improvement that ended up triggering the reported lack of external
entropy.
* getrandom() active entropy waiting:
Revert "Revert "ext4: make __ext4_get_inode_loc plug""
random: try to actively add entropy rather than passively wait for it
Linus Torvalds [Mon, 30 Sep 2019 00:59:23 +0000 (17:59 -0700)]
Revert "Revert "ext4: make __ext4_get_inode_loc plug""
This reverts commit
72dbcf72156641fde4d8ea401e977341bfd35a05.
Instead of waiting forever for entropy that may just not happen, we now
try to actively generate entropy when required, and are thus hopefully
avoiding the problem that caused the nice ext4 IO pattern fix to be
reverted.
So revert the revert.
Cc: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 28 Sep 2019 23:53:52 +0000 (16:53 -0700)]
random: try to actively add entropy rather than passively wait for it
For 5.3 we had to revert a nice ext4 IO pattern improvement, because it
caused a bootup regression due to lack of entropy at bootup together
with arguably broken user space that was asking for secure random
numbers when it really didn't need to.
See commit
72dbcf721566 (Revert "ext4: make __ext4_get_inode_loc plug").
This aims to solve the issue by actively generating entropy noise using
the CPU cycle counter when waiting for the random number generator to
initialize. This only works when you have a high-frequency time stamp
counter available, but that's the case on all modern x86 CPU's, and on
most other modern CPU's too.
What we do is to generate jitter entropy from the CPU cycle counter
under a somewhat complex load: calling the scheduler while also
guaranteeing a certain amount of timing noise by also triggering a
timer.
I'm sure we can tweak this, and that people will want to look at other
alternatives, but there's been a number of papers written on jitter
entropy, and this should really be fairly conservative by crediting one
bit of entropy for every timer-induced jump in the cycle counter. Not
because the timer itself would be all that unpredictable, but because
the interaction between the timer and the loop is going to be.
Even if (and perhaps particularly if) the timer actually happens on
another CPU, the cacheline interaction between the loop that reads the
cycle counter and the timer itself firing is going to add perturbations
to the cycle counter values that get mixed into the entropy pool.
As Thomas pointed out, with a modern out-of-order CPU, even quite simple
loops show a fair amount of hard-to-predict timing variability even in
the absense of external interrupts. But this tries to take that further
by actually having a fairly complex interaction.
This is not going to solve the entropy issue for architectures that have
no CPU cycle counter, but it's not clear how (and if) that is solvable,
and the hardware in question is largely starting to be irrelevant. And
by doing this we can at least avoid some of the even more contentious
approaches (like making the entropy waiting time out in order to avoid
the possibly unbounded waiting).
Cc: Ahmed Darwish <darwish.07@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Nicholas Mc Guire <hofrat@opentech.at>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Sun, 29 Sep 2019 18:19:25 +0000 (11:19 -0700)]
Merge tag 'fixes-5.4-merge-window' of git://git./linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omap variants
Few fixes for ti-sysc interconnect target module driver for no-idle
quirks that caused nfsroot to fail on some dra7 boards.
And let's fixes to get LCD working again for logicpd board that got
broken a while back with removal of panel-dpi driver. We need to now
use generic CONFIG_DRM_PANEL_SIMPLE instead.
* tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
ARM: dts: am3517-evm: Fix missing video
ARM: dts: logicpd-torpedo-baseboard: Fix missing video
ARM: omap2plus_defconfig: Fix missing video
bus: ti-sysc: Fix handling of invalid clocks
bus: ti-sysc: Fix clock handling for no-idle quirks
Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 29 Sep 2019 18:19:18 +0000 (11:19 -0700)]
Merge tag 'scmi-fixes-5.4' of git://git./linux/kernel/git/sudeep.holla/linux into arm/fixes
ARM SCMI fixes for v5.4
Couple of fixes: one in scmi reset driver initialising missed scmi handle
and an other in scmi reset API implementation fixing the assignment of
reset state
* tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
reset: reset-scmi: add missing handle initialisation
firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
Link: https://lore.kernel.org/r/20190918142139.GA4370@bogus
Signed-off-by: Olof Johansson <olof@lixom.net>