drivers/staging/unisys: fix build

drivers/staging/unisys/visorchipset/file.c:31: error: redefinition of typedef 'GUEST_PHYSICAL_ADDRESS'
drivers/staging/unisys/common-spar/include/channels/controlvmchannel.h:23: note: previous declaration of 'GUEST_PHYSICAL_ADDRESS' was here

Cc: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys/virthba/virthba.c print u64 with %llu

drivers/staging/unisys/virthba/virthba.c:520:2: warning: format ‘%u’
expects argument of type ‘unsigned int’, but argument 4 has type ‘u64’
[-Wformat=]
drivers/staging/unisys/virthba/virthba.c:749:2: warning: format ‘%d’
expects argument of type ‘int’, but argument 5 has type ‘u64’
[-Wformat=]
drivers/staging/unisys/virthba/virthba.c:1142:4: warning: format ‘%d’
expects argument of type ‘int’, but argument 7 has type ‘u64’
[-Wformat=]
drivers/staging/unisys/virthba/virthba.c:1151:5: warning: format ‘%d’
expects argument of type ‘int’, but argument 5 has type ‘u64’
[-Wformat=]

After apply the patch:
linux-next]$ make C=1 drivers/staging/unisys/virthba/virthba.o
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CALL    scripts/checksyscalls.sh
  CHECK   drivers/staging/unisys/virthba/virthba.c
  CC [M]  drivers/staging/unisys/virthba/virthba.o

Signed-off-by: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove generally useless elses from visorchipset_main.c

There are several else clauses that aren't necessary listed by checkpatch.pl in
visorchipset_main.c. Remove these.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix spacing in visorchipset_main.c

Fix the missing blank lines between declarations and code in
visorchipset_main.c.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix spacing in parser.c

Fix the two spacing errors in parser.c.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix spacing in file.c

There's a missing blank line between code and declarations in file.c.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix indentation of uisutil_copy_fragsinfo_from_skb()

The function uisutil_copy_fragsinfo_from_skb() in uisutils.c is messy and
over-indented. This patch fixes the function's indentation so it is cleaner.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix spacing in uisthread.c

Fix the missing blank line between code and declarations in uisthread.c.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove void return from uislib_mod_exit()

Remove the extraneous return from the uislib module exit function.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: simplify destroy_bus() in uislib.c

The destroy_bus() function is heavily indented and many lines extend past the
right margin. This patch simplifies the function without changing its effects.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix spacing in uislib.c

Fix the line spacing between code and local variables in uislib.c.

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.18a' of git://git./linux/kernel/git/jic23/iio into work-next

Jonathan writes:

1st round of new IIO drivers, functionality and cleanups for the 3.18 cycle.

Maintainer Updates

* Add 3 designated reviewers for IIO.  Lars, Peter and Hartmut have been
  actively reviewing a lot of patches for a while now so this reflects
  the status quo.  These three are probably the only reason I keep
  my head above the water!

New drivers and device support

* max5821 DAC
* Rockchip SARADC
* TI ADC128S052 ADC
* BMC150 Accelerometer
* exynos ADC driver gains support for s3c24xx and s3c64xx parts.
* kxcjk-1013 gainst range control and runtime PM support to drive
  down it's power usage.

Driver removals

* Drop ad5930, ad99850, ad9852, ad9910 and ad9951 drivers on the simple
  basis that they drivers just provided a register write function with
  no compliant user space ABI whatsoever.  Much better to drop them and
  start again for these in the fullness of time.

Core Enhancements

* Join together neighbouring elements in the demux units that feeds
  the binary interfaces.  This cuts down on the number of individual
  copies needed  when splitting out individual channels from the incoming
  channel scans.
* Other demux related cleanups such as using roundup instead of a local
  implementation.

Cleanups

* Drop an unnecessary double setting of the owner field in xilinx adc.
* Some more patches to use managed (devm) interfaces to cut down on
  complexity of removal code.
* adis16060 coding style fixlets.
* Fix some incorrect error returns in the Xilinx ADC driver.
* Coding style fixlets for various accelerometer drivers.
* Some sparse warning fixes to do with endianness and sign of variables.
* Fix an incorrect and entirely pointless use of sizeof on a dynamic pointer
  in hid-sensor-magn-3d by dropping the relevant code.

iio: adc: xilinx: Remove .owner field for driver

There is no need to init .owner field.

Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"

This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio: Remove ad5930/ad9850/ad9852/ad9910/ad9951 dummy drivers

All what these 'drivers' do is expose a single (non standard ABI) sysfs
attribute that when written to does a direct pass-through to spi_write(). This
is rather ugly and does not justify the existence of a driver as the same can
easily done by using the spidev interface.

The drivers will eventually be rewritten as proper IIO ABI compliant drivers
which do have the proper abstraction layers between userspace and the device.
But in the meantime these driver do not add any extra value and just clutter up
the staging area. So just remove them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

MAINTAINERS: Add entry for Analog Devices IIO drivers

Add Michael and myself as the maintainer for the Analog Devices IIO drivers.
The entry matches on all files in drivers/staging/iio and drivers/iio/ starting
with the 'ad' prefix, except for 'adjd' as that one is used by Avago
Technologies.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

MAINTAINERS: Add designated reviewers for IIO subsystem

Add those persons who generally tend to review new IIO patches to the list of
designated reviewers to make sure that they are Cc'ed on new patches.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: dgnc: Remove unnecessary dgnc_Major_Control_Registered variable

The dgnc_Major_Control_Registered variable purpose was to act as a flag
to indicate if the character device has been successfully registered
into the kernel. This flag was later checked in the module cleanup
function to know if the character device needs to be deregistered.

However the {device,class}_destroy and unregister_chrdev functions may
be called with 'invalid' data perfectly fine. This means that this
variable is not needed and can safely be removed which is what this
commit does.

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Remove not needed dgnc_driver_start variable

The dgnc_driver_start variable purpose was to indicate if the driver
'start' routine has been called. Now, because the 'start' routine can
only be called once this variable is not needed thus this commit
removes it.

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Remove driver-wide polling counter variable

The polling counter variable is only exposed via sysfs and has no other
purpose.

Now, since the polling shall be implemented as a board specific feature
rather than being global in the driver this counter is obsolete.

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Remove driver-wide state variable

This commit removes the driver's global state variable. This is ok
because the state was changed only once at the end of init phase thus
the future usage of this variable is pointless.

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: fix attribute as suggested by checkpatch

we should use __packed attribute

Signed-off-by: Purnendu Kapadia <pro8linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: prism2mgmt.c Fix break not useful

Fixed up warnings, break is not useful after return statement.
And the exit Label is deleted, now returning inline.

Signed-off-by: Jeshwanth Kumar N K <jeshkumar555@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: libcfs: pr_warn instead printk

This patch fixes the following warning using checkpatch.pl
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then
dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...

Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: libcfs: do not use assignment in if condition

This patch fixes the following error using checkpatch.pl
Error: do not use assignment in if condition

Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: get rid of obd_* typedefs

We have a bunch of typedefs for common things that made no sense
and hid the actual type from plain view.
Replace them with proper uXX or sXX types.
Exception is in lustre_idl.h where
they are replaced with __uXX and __sXX to be able to be included
in userspace

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: get rid of seqno_t and mdsno_t typedefs

seqno_t is u64 and mdsno_t is u32 so just use them as such.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Convert DBG_PRT to pr_<level>

DBG_PRT uses are unnecessarily complex.

Convert DBG_PRT msglevel to pr_<level>.
This changes the KERN_<level> type of several uses.
It also enables dynamic_debug for the pr_debug conversions.

This patch can be a prelude to converting these pr_<level>
uses to dev_<level> as appropriate.

Other changes:

Realign arguments of these conversions.
Remove now unused static int msglevel declarations.
Remove now unused DBG_PRT #define.

Compile tested only.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: Fix integer overflow in ll_fid2path

Reported by Dan Carpenter <dan.carpenter@oracle.com>

outsize = sizeof(*gfout) + gfin->gf_pathlen;

Where outsize is int and gf_pathlen is u32 from userspace
can lead to integer overflowwhere outsize is some small number
less than sizeof(*gfout)

Add a check for pathlen to be of sensical size.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-on: http://review.whamcloud.com/11412
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5476
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: optimize ll_fid2path()

The only parameter from userspace that matters is the length of the
buffer. We don't need to allocate then import the whole structure. By
importing only that length, we can save a memory allocation.

Add sparse annotations to that function.

Signed-off-by: frank zago <fzago@cray.com>
Reviewed-on: http://review.whamcloud.com/11167
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5389
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: hold inode mutex around ll_setattr_raw()

ll_setattr_raw() expects to be called with the inode mutex held so do
when calling it from ll_hsm_import().

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/11349
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5456
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/clio: reorder initialization in cl_req_alloc()

In cl_req_alloc() ensure that the list heads crq_pages and crq_layers
have been initialized before passing the request to
cl_req_completion(). This fixes an oops in the error path.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/11009
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5290
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: drop redundant ibits lock interoperability check

In very old release (older than Lustre-1.8), if the client talks with
the server that does not support ibits lock, then the client needs to
convert it as plain lock. Such interoperability check and convertion
is out of date for a long time. Drop it.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-on: http://review.whamcloud.com/11004
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4971
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: Make sure ft_flags is valid

In ll_fault0, the 'fault' struct is mostly cleared before the call to
cl_io_loop, but ft_flags is not reset. It is ordinarily set by
the call to filemap_fault in vvp_io_kernel_fault, but if Lustre
returns before calling filemap_fault, it still has the old value of
ft_flags.

ll_fault0 will then consume the ft_flags field. If it has the
VM_FAULT_RETRY bit set, it will be used as ll_fault0() and
ll_fault()'s return value.

This is a problem when VM_FAULT_RETRY is in ft_flags:
When fault/filemap_fault return with that flag set, they have already
released the mmap semaphore, and do_page_fault does not need to
release it.
Incorrectly returning this flag from ll_fault means mmap_sem
is not upped in the kernel's do_page_fault().

In addition to clearing ft_flags, this patch does not use it unless
it is valid.  It's potentially misleading to return ft_flags in
"fault_ret" if ft_flags has not been set by filemap_fault.

This adds clarity, but does not change the current behavior:
When not valid, ft_flags is replaced by fault_ret, which is zero,
as is ft_flags when not set by filemap_fault.

Signed-off-by: Patrick Farrell <paf@cray.com>
Reviewed-on: http://review.whamcloud.com/10956
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5291
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: cleanup intent if mdc_finish_enqueue() fails

In mdc_enqueue() clear the lock handle, lock mode, and request stored
in the lookup intent if mdc_finish_enqueue() fails.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/10963
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5289
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: check for integer overflow in hsm user request

Check to make sure total size of request does not overflow when
calculated.  Return -1 from hur_len() if it does overflow.

Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-on: http://review.whamcloud.com/10615
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4984
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: Merge string literals on adjacent lines in prism2fw.c

This patch fixes the 'quoted string split across lines' checkpatch.pl
warning in prism2fw.c.

Signed-off-by: Artemiy Volkov <artemiyv@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mt29f_spinand: coding style fixes

This patch fixes the coding style error :
"WARNING: else is not generally useful after a break or return"
reported by checkpatch.pl

Signed-off-by: Vibi Sreenivasan <vibisreenivasan@linuxmail.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255: provide common defines for registers

There are a couple comedi drivers that duplicate some of the register
defines used by the 8255 module. Move these defines into the header
so the duplication can be removed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255: handle memory mapped io

The drivers that use this module with memory mapped io all have the
ioremap'ed base address stored in the comedi_device 'mmio' member.

Introduce a default (*io) function that does 8-bit memory mapped io.

Modify subdev_8255_init() so that it takes a flag parameter indicating
if the io is port or memory mapped. Make the function static and rename
it to __subdev_8255_init().

Introduce two exported wrappers for __subdev_8255_init():

  subdev_8255_init() - for drivers that do 8-bit port io
  subdev_8255_mm_init() - for drivers that do 8-bit memory mapped io

Use subdev_8255_mm_init() in the drivers that do 8-bit memory mapped io
and remove the private (*io) functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255: remove incomplete async command support

The async command support in this module is incomplete and nothing
has ever used it. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255: refactor how the (*io) function works

Currently, all users of is module that use the default (*io) function
pass an 'iobase' to subdev_8255_init() of the form:

  dev->iobase + OFFSET_TO_8255_BASE_REG

Now that the (*io) callback includes the comedi_device 'dev' pointer
the 'dev->iobase' does not need to be included.

Modify the default (*io) function, subdev_8255_io(), to automatically
add the dev->iobase to the address when reading/writing the port.

For aesthetics, rename the subdevice private data member to 'regbase'.
Also, rename the local variables in this module that are used to
access this member.

Add a comment in dev_8255_attach() about the 'iobase' that is passed
to subdev_8255_init(). For manually attached 8255 devices the io
region is requested with __comedi_request_region() which does not
set dev->iobase. For these devices the 'regbase' is actually the
'iobase'.

Remove the, now unnecessary, dev->iobase from all the callers of
subdev_8255_init(). There are a couple drivers that only passed the
dev->iobase. For those drivers pass a 'regbase' of 0x00.

Note that the das16m1 driver is a bit goofy. The devpriv->extra_iobase
is requested using __comedi_request_region() which does not set the
dev->iobase. But the starting address passed is dev->iobase + DAS16M1_82C55
so a 'regbase' of DAS16M1_82C55 is passed to subdev_8255_init().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255_pci: tidy up pci_8255_mmio()

The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.

Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (i * 4).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: tidy up dio_callback_4020()

The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.

Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (I8255_4020_REG).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: tidy up dio_callback()

The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.

Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (DIO_8255_OFFSET).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: tidy up daqboard2000_8255_cb()

The 8255 driver (*io) callback now includes the comedi_device pointer.
Using this we can get the ioremap'ed base address.

Instead of passing the (cast) mmio address to subdev_8255_init(), pass
the 'iobase' of the 8255 registers (dioP2ExpansionIO8Bit).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: tidy up labpc_8255_mmio()

The 8255 driver (*io) callback now includes the comedi_device pointer.

Instead of passing the (cast) pointer to subdev_8255_init(), pass the
'iobase' of the 8255 registers (DIO_BASE_REG).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up ni_8255_callback()

The 8255 driver (*io) callback now includes the comedi_device pointer.

Instead of passing the (cast) pointer to subdev_8255_init(), pass the
'iobase' of the 8255 registers (Port_A).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255: add a comedi_device param to the (*io) callback

The 8255 driver uses an (*io) callback to read/write the registers
of the 8255 device. The default callback provided by the driver uses
inb()/outb() calls to access to registers based on an 'iobase' that
was initialized during the subdev_8255_init() and a 'port' value.

The users of this module can optionally provide a custom (*io) callback
to handle the read/write in another manner.

Make the (*io) callback a bit more flexible by also passing the
comedi_device pointer as a parameter.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: refactor iobase addresses

This driver uses two iobase addresses, found in PCI bars 2 and 3.
Currently, the address in PCI bar 2 is saved in the private data as
'iobase1' and the address in PCI bar 3 is saved in the comedi_device
as the 'iobase'. The 'iobase' is the base address of the daq
registers (ai/ao) of the board. The 'iobase1' address is the base
address of the 8255, 8254, configuration, and interrupt registers.

Flip the saving of these base addresses. Save the address from PCI
bar 2 in the comedi_device 'iobase' and the address from PCI bar 3
in the private data as 'daqio'.

This will help with some cleanup of the 8255 module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidda: refactor iobase addresses

This driver uses two iobase addresses, found in PCI bars 2 and 3.
Currently, the address in PCI bar 3 is saved in the comedi_device as
the 'iobase' and the one in PCI bar 2 is just passed to subdev_8255_init()
as the 'iobase' parameter.

Save the PCI bar 3 address in the private data as 'daqio' and the
address from PCI bar 2 in the comedi_device as the 'iobase'.

This will help with some cleanup of the 8255 module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: refactor iobase addresses

This driver uses three iobase addresses, found in PCI bars 2, 3, and 4.
Currently, the address in PCI bar 2 is saved in the comedi_device as
the 'iobase', the PCI bar 3 address is saved in the private data as
'BADR3' and the one in PCI bar 4 is just passed to subdev_8255_init()
as the 'iobase' parameter.

Flip the saving of the PCI bar 2 and 4 base addresses. Save the address
from PCI bar 2 in the private data as the 'daqio' and the address from
PCI bar 4 in the comedi_device as the 'iobase'.

This will help with some cleanup of the 8255 module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: use dev->iobase for PCI bar 3

Currently the base address of the 8254 and 8255 devices, found in
PCI bar 3, is saved in the private data as 'pacer_counter_dio'.
The 'iobase' in the comedi_device is currently unused.

Save the address from PCI bar 3 in the comedi_device and remove
the unnecessary member from the private data.

This will help with some cleanup of the 8255 module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: remove dio200_common_detach()

This exported function just does a free_irq() to release the interrupt
handler for the legacy and PCI dio200 drivers.

The legacy driver also calls comedi_legacy_detach() which would also
do the free_irq(). For that driver the just use comedi_legacy_detach()
directly for the (*detach).

For the PCI driver, add the free_irq() to the private (*datach) function.

Remove the, then unused, dio200_common_detach() function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: absorb dio200_subdev_timer_init()

This function is only called by amplc_dio200_common_attach() and it
can never fail. For aesthetics, absorb it into that function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.h: remove boardinfo 'mainshift'

This member of the boardinfo is only set for the PCIE boards. Use the
'is_pcie' flag to determine if the offset needs to be shifted when
reading/writing the registers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.h: rename 'has_enhancements' in boardinfo

This member of the boardinfor is only set for the PCIE boards. For
aeshetics, rename it to 'is_pcie'.

For clarity, use this flag in the (*auto_attach) to determine if the
dio200_pcie_board_setup() function needs to be called instead of using
the switch (context_model).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.h: remove unnecessary function comment descriptions

The function names provide enough description. The extra comments are not
necessary. Remove them.

Also, tidy up some of the function declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.h: remove struct dio200_layout definition

This struct is used to provide part of the boardinfo data. Using the extra
indirection does not provide any additional clarity to the driver.

Absorb the members from dio200_layout into dio200_board and remove the
extra 'layout' indirection.

For aesthetics, rename all the local variables used for the boardinfo
pointer to 'board'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: tidy up {comedi, pci}_driver declarations

For aesthetics, add some whitespace to these declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: tidy up comedi_driver declaration

For aesthetics, add some whitespace to the declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: tidy register map defines

This commit performs a final tidying of the register map defines, bringing
them to a state that is ready for merging into addi_apci_1564.c when the
time comes.  Actions performed include:

*Removes the APCI1564_ADDRESS_RANGE macro, which is no longer needed/used.
*Renames the APCI1564_DIGITAL_OP_{VCC,CC}_INTERRUPT_{ENABLE,DISABLE}
macros to shorter names which are more consistent with the digital input
interrupt macros.
*Fixes a typo in a comment (dev>iobase changed to dev->iobase).
*Renames the APCI1564_TCW_* macros to APCI1564_COUNTER_* names to more
accurately reflect that they are only offsets to counter registers (since
only the counters are offset from dev->iobase).

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengraver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: Remove in-driver watchdog support code

Starting with commit 1496e5961113 ("staging: comedi: addi_apci_1564: use
addi_watchdog module to init watchdog subdevice"), this driver uses the
addi_watchdog module to provide support for the watchdog subdevice.  Any
remaining watchdog code in-driver can and should be removed.

This will also make future work on the timer and counter subdevices easier.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: remove apci1564_do_config

The DO config function served the purpose of configuring the diagnostic
interrupts for the board.  As the driver currently does not support
diagnostic interrupts, the digital output subdevice does not need an
insn_config operation and this function can be safely removed.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bmc: fix coding style warning

This is a patch to the vendorspecificextn.c that fixes coding style
warning message line over 80 characters found by checkpatch.pl script.
I am submitting this patch as required by Eudyptula Challenge.

Signed-off-by: Ramesh Basukala <basukalaramesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Remove redundant return of void function

This patch fix checkpatch.pl warning
Tested by compilation only.

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: ion.c Add a new blank line after decleration

This patch fix checkpatch.pl warning
Tested by compilation only.

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: ion_dummy_driver.c Replace kzalloc() by kcalloc()

This patch fix checkpatch.pl warning
Tested by compilation only.

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Removed unneeded code.

This patch removes some unneeded code.
1) kzalloc() allocates 4 extra bytes so that we can align the return
   value.  But actually the return value is already aligned so we can
   remove the + 4 and the call to N_BYTE_ALIGMENT().
2) The memset() isn't needed because kzalloc() zeroes the allocation.

Suggested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Lines over 80 characters fixed.

This is a patch to the hal/rtl8188eu_recv.c file that fixes up a "line
over 80 characters" warning found by the checkpatch.pl tool.

Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Declare Efuse_GetCurrentSize() as a static function

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_iol.h: Remove unused struct, enum and macro

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_iol.c: Remove unused functions

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function iol_ioconfig()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove rtl8188e_IOL_exec_cmds_sync() and its wrapper function

rtl8188e_IOL_exec_cmds_sync() is a unused function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_cmd_buf_dump()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_cmd_tx_pkt_buf_dump()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused functions rtw_IOL_append_DELAY_[US, MS]_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_exec_cmds_sync()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_append_WD_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_cmd_boundary_handle()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_accquire_xmit_frame()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Hal8188EPhyCfg.h: Remove unused function declaration

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function storePwrIndexDiffRateOffset()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove odm_RegConfig8188E.[h, c] files

driver doesn't require these files anymore.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Cleanup and simplify Baseband configuration code

Cleanup and consolidate Baseband configuration related code in
HalHWImg8188E_BB.c file.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function odm_ConfigMAC_8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function odm_ConfigRFReg_8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused functions odm_ConfigRF_Radio[A, B]_8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Cleanup and simplify RF configuration code

Cleanup and consolidate RF configuration related code in
HalHWImg8188E_RF.c file.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Cleanup and simplify MAC configuration code

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Cleanup firmware initialization code

Using rtl8188ee's (drivers/net/wireless/rtlwifi/rtl8188ee/fw.c) neat and clean
firmware initialization code to replace rtl8188eu's messy firmware
initialization code.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u/ieee80211: Fix sparse ieee80211_debug_init/_exit not declared warning

A sparse warning is generated about 'ieee80211_debug_init' and
'ieee80211_debug_exit' not being declared.

  drivers/staging/rtl8192u/ieee80211/ieee80211_module.c:275:12: warning:
  symbol 'ieee80211_debug_init' was not declared. Should it be static?
  drivers/staging/rtl8192u/ieee80211/ieee80211_module.c:297:13: warning:
  symbol 'ieee80211_debug_exit' was not declared. Should it be static?

These functions are used outside of this file so using static will not
work.  The prototypes are given in r8192U_core.c but sparse nonetheless
still gives a warning.  Fix the sparse warning by moving these
prototypes from r8192U_core.c to ieee80211.h.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Cc: Joel Pelaez Jorge <joelpelaez@gmail.com>
Cc: Andrea Merello <andrea.merello@gmail.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Joe Perches <joe@perches.com>
Cc: Himangi Saraogi <himangi774@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Cc: Ana Rey <anarey@gmail.com>
Cc: Chaitanya Hazarey <c@24.io>
Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192u/r8192U_wx.c: fix warnings issued by sparse

This minor patch motivated by eudyptula challenge fixes the following warnings issued
by `sparse' in drivers/staging/rtl8192u/r8192U_wx.c:
 .../r8192U_wx.c:27:5: warning: symbol 'rtl8180_rates' was not declared. Should it be static?
 .../r8192U_wx.c:961:22: warning: symbol 'r8192_get_wireless_stats' was not declared. Should it be static?
 .../r8192U_wx.c:990:24: warning: symbol 'r8192_wx_handlers_def' was not declared. Should it be static?

Signed-off-by: Ovidiu Toader <ovi@phas.ubc.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "uiOperation" -> "operation"

Renamed variable "uiOperation" -> "operation" in
bcm_char_ioctl_gpio_set_request().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "uiBit" -> "bit"

Renamed variable "uiBit" -> "bit" in bcm_char_ioctl_gpio_set_request().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "ucResetValue" -> "reset_val"

Renamed variable "ucResetValue" -> "reset_val" in
bcm_char_ioctl_gpio_set_request().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "uiTempVar" -> "tmp"

Renamed variable "uiTempVar" -> "tmp" in

    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_eeprom_reg_read()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "sWrmBuffer" -> "wrm_buff"

Renamed variable "sWrmBuffer" -> "wrm_buff" in

    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_eeprom_reg_read()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "Bufflen" -> "buff_len"

Renamed variable "Bufflen" -> "buff_len" in
bcm_char_ioctl_reg_read_private().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "IoBuffer" -> "io_buff"

Renamed variable "IoBuffer" -> "io_buff" in

    bcm_char_ioctl_reg_read_private()
    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_eeprom_reg_read()
    bcm_char_ioctl_gpio_set_request()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>