[media] libv4l-introduction.rst: improve crossr-references

Use C cross-references to mention the V4L2 API calls on all
places it occurs inside this file.

While here, also mark constants as such.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] libv4l-introdution.rst: fix function definitions

c:type is not the right tag for function definitions.
Replace them by .. c:function::

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] fix clock_gettime cross-references

Fix those warnings:

Documentation/media/uapi/cec/cec-ioc-dqevent.rst:124: WARNING: c:func reference target not found: clock_gettime(2)

By replacing it with the right function name, using this shell script:

for i in `find Documentation/media -type f`; do sed 's,clock_gettime(2),clock_gettime,' <$i >a && mv a $i; done

Please notice that this will make the nitpick mode to shut up
complaining about that, becasue clock_gettime is on its exclude list,
but the cross reference will be undefined until someone documents
this function at the core documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst: fix some broken struct references

The :c:type: references point to the structure name, and not to
struct foo.

Fixed via this shell script:

for i in `find Documentation/media -type f`; do perl -ne 'if (s/\:c\:type\:\`struct\s*(\S+)\`/struct :c:type:`$1`/) { s/struct\s+struct/struct/;  s/(struct\s+\:c\:type\:\`\S+\`)\s+structure/$1/;  } print $_' <$i >a && mv a $i; done

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst: simplify c:type: cross references

Instead of using c:type:`struct foo <foo>`, use:
struct c:type:`foo`

This patch was generated via this shell script:

for i in `find Documentation/media -type f`; do perl -ne 'if (m/\:c\:type\:\`struct\s+(\S+)\s*\<(\S+)\>\`/) { $s=$1; $r=$2; if ($s eq $r) { s/\:c\:type\:\`struct\s+(\S+)\s*\<(\S+)\>\`/struct :c:type:`$2`/; s/struct\s+struct/struct/;  s/(struct\s+\:c\:type\:\`\S+\`)\s+structure/$1/;  }} print $_' <$i >a && mv a $i; done

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst: fix cec bad cross-references

Fix some CEC cross references that are broken.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst: fix dmx bad cross-references

Some structs are pointed via the typedef. As we replaced
those references, fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] fix broken references on dvb/video*rst

Trivially fix those broken references, by copying the structs
fron the header, just like other API documentation at the
DVB side.

This doesn't have the level of quality used at the V4L2 side
of the API, but, as this documents a deprecated API, used
only by av7110 driver, it doesn't make much sense to invest
time making it better.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst: fix the remaining broken links for DVB CA API

Several links are broken, as they were using the typedef
name, instead of using the corresponding structs. Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ca-set-pid.rst: document struct ca_pid

Add a table describing the fields on this struct, based
on ca.h header.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ca-get-slot-info.rst: document struct ca_slot_info

Add documentation for struct ca_slot_info and for the two
sets of define used by it, according with what's there at the
ca.h header.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ca-get-msg.rst: add a boilerplate for struct ca_msg

There are no descriptions at ca.h header for this struct.
Yet, as we want to get rid of the warnings, let's add a
boilerplate, with just the struct types and fields.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ca-get-descr-info.rst: add doc for for struct ca_descr_info

The documentation follows what's there at the ca.h header.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] ca-get-cap.rst: add a table for struct ca_caps

Add a flat-table describing struct ca_caps, as found at
the source file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst exceptions: use C domain references for DVB headers

Now that we moved away from the :ref: type of references,
we need to update the exceptions lists.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-subdev.h: fix a doc nitpick warning

One markup tag is wrong here.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-subdev.rst: get rid of legacy functions

There are two warnings that are due to functions that has long
gone:

Documentation/media/kapi/v4l2-subdev.rst:417: WARNING: c:func reference target not found: v4l2_i2c_new_subdev_cfg
Documentation/media/kapi/v4l2-subdev.rst:436: WARNING: c:func reference target not found: v4l2_i2c_new_probed_subdev

Update the documentation to remove those.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-dv-timings.h: let kernel-doc parte the typedef argument

Now that scripts/kernel-doc was fixed to parse the typedef
argument used here, let it produce documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-device.h: fix some doc tags

Fix some minor issues at the documentation tags on this file,
adding cross-references where needed, and fixing some broken
ones.

While here, fix a few spaces before tabs to make Checkpatch happier.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-dev.rst: fix a broken c domain reference

The "struct" were inside the reference, causing it to break.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-ioctl.h: document the remaining functions

There are several undocumented functions here; document them.

While here, make checkpatch.pl happy.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cec-ioc-dqevent.rst: fix some undefined references

Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_state_change
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_state_change
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_lost_msgs
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_lost_msgs
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_state_change
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_lost_msgs

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-ctrls.h: Fix some c:type references

Now that the uAPI is using c:type, let's use it here too.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst: use C domain for enum references on uapi

Change the parse-headers.pl and the corresponding files to use
the C domain for enum references.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-ctrls.h: fix doc reference for prepare_ext_ctrls()

The prepare_ext_ctrls() function is actually internal to the
v4l2-ctrls.c implementation, so it doesn't have a declaration
for the kAPI header to reference it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] diff-v4l.rst: Fix V4L version 1 references

The V4L version 1 structures had long gone from the Linux Kernel.
It doesn't make sense to use cross-references for them, as they
won't be found.

So, get rid of them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst: convert uAPI structs to C domain

instead of declaring the uAPI structs using usual refs, e. g.:
.. _foo-struct:

Use the C domain way:
.. c:type:: foo_struct

This way, the kAPI documentation can use cross-references to
point to the uAPI symbols.

That solves about ~100 undefined warnings like:
WARNING: c:type reference target not found: foo_struct

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-ctrls: document some extra data structures

The typedefs and a macro are not defined. While here, improve a
few bits on the documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rc-map.h: document structs/enums on it

There are some structs/enums that aren't documented via
kernel-doc markup. Add documentation for them.

Fix those warnings:
./include/media/rc-map.h:103: WARNING: c:type reference target not found: rc_map_list
./include/media/rc-map.h:110: WARNING: c:type reference target not found: rc_map_list
./include/media/rc-map.h:117: WARNING: c:type reference target not found: rc_map

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] conf_nitpick.py: ignore external functions used on mediactl

There are some functions/macros used by the mediactl documentation
that are alien to the media subsystem. Ignore them.

After this patch, the media core will only complain about this
static function:
Documentation/media/kapi/mc-core.rst:97: WARNING: c:func reference target not found: media_devnode_release

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst: improve the kAPI documentation for the mediactl

There are several issues on the documentation:
  - the media.h header were not properly referenced;
  - verbatim expressions were not properly marked as such;
  - struct member references were wrong;
  - some notes were not using the right markup;
  - a comment that were moved to the kernel-doc markup were
    duplicated as a comment inside the struct media_entity;
  - some args were not pointing to the struct they're using;
  - macros weren't documented.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] demux.h: fix a documentation warning

The kernel-doc parser didn't handle well the private:
tag. Rewrite it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mc-core.rst: Fix cross-references to the source

The cross-reference to "struct media_pad" was pointing to
a place that doesn't exist. Fix it, and adjust the second
reference on the same paragraph to use the same text.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] demux.h: Fix a few documentation issues

demux.h was lacking documentation for the DMX_FE_ENTRY macro:
./drivers/media/dvb-core/demux.h:511: WARNING: c:func reference target not found: DMX_FE_ENTRY

While here, get rid of unused parameters and fix a few minor issues
at the header file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dvb_ringbuffer.h: document the define macros

There are a few define macros not documented, because the ReST
output was causing more warnings.

Now that this got fixed, document them. While here, fix the
remaining coding style issues.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dtv-core.rst: move DTV ringbuffer notes to kAPI doc

Instead of keeping those notes at the file on a non-structured
way, move them to dtv-core.rst, using the proper ReST tags.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] dvb_ringbuffer.h: Document all functions

There are several functions there there weren't properly
documented. Add documentation for them.

While here, make checkpatch.pl happier.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] conf_nitpick.py: add external vars to ignore list

There a some other types and functions that aren't declared
inside the media document but are elsewhere. Add them to the
ignore list.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst: parse-headers.pl: use the C domain for cross-references

Instead of keep using the normal reference, move to the C
domain ones. Using C domains everywhere will allow
cross-references between kAPI and uAPI docs.

Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] docs-rst: parse-headers.pl: make debug a command line option

Add a parser for the --debug option, in order to allow
seeing what the parser is doing.

Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] Documentation: DT: add bindings for ST HVA

This patch adds DT binding documentation for STMicroelectronics hva
driver.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cobalt: update EDID

Update the cobalt EDID, fixing various incorrect values (wrong name,
product code, various video capabilities).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] vivid: update EDID

Update the vivid EDID, fixing various incorrect values (wrong name,
product code, various video capabilities).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] tw5864-core: remove excessive irqsave

As warned by smatch:
drivers/media/pci/tw5864/tw5864-core.c:160 tw5864_h264_isr() error: double lock 'irqsave:flags'
drivers/media/pci/tw5864/tw5864-core.c:174 tw5864_h264_isr() error: double unlock 'irqsave:flags'

Two different spinlocks are obtained, so having two calls is correct,
but second irqsave is superfluous, and using same "flags" variable is
just wrong.

Reported-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] Revert "[media] tw5864: remove double irq lock code"

This reverts commit 617e901a12ad ("[media] tw5864: remove double irq lock code").

That commit was rejected by Andrey Utkin <andrey_utkin@fastmail.com>,
but it had already been merged. Revert and apply Andrey's corrected
patch next.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pulse8-cec: some small fixes

Fix some small things:
    - clean up setup function
    - use MSGEND instead of 0xfe
    - don't assign "return value" from cec_phys_addr to err,
      it has return type void.

Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] atmel-isc: remove the warning

Replace the 'IS_ERR_VALUE(irq)' with 'ret < 0' in
function 'atmel_isc_probe'.

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: tw686x: Support frame sizes and frame intervals enumeration

This commit adds support for VIDIOC_ENUM_FRAMESIZES
and VIDIOC_ENUM_FRAMEINTERVALS enumeration ioctls.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pulse8-cec: sync configuration with adapter

When the configuration is changed, they are also written to the adapter.
This allows the adapter to continue operating in autonomous mode with
the same settings when it is disconnected from the driver (typically by
going into suspend). For adapters with firmware version 2 or greater, the
settings are also persisted in EEPROM.

A new module parameter is added to optionally also use the configuration
already present in the adapter when it is connected. This option is
enabled by default.

When a new configuration is written, the autonomous mode is
automatically enabled. When the device is unconfigured, autonomous mode
is disabled.

Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pulse8-cec: add notes about behavior in autonomous mode

The pulse8 dongle has some quirky behaviors when in autonomous mode.
Document these.

Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] pulse8-cec: serialize communication with adapter

Make sending messages to the adapter serialized within the driver.

send_and_wait is split into send_and_wait_once, which only sends once
and checks for the result, and the higher level send_and_wait, which
performs locking and retries.

Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cec: allow configuration both from within driver and from user space

It makes sense for adapters such as the Pulse-Eight to be configurable
both from within the driver and from user space, so remove the
requirement that drivers only can call cec_s_log_addrs or
cec_s_phys_addr if they don't expose those capabilities to user space.

Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] radio-si470x-i2c: Delete owner assignment

The field "owner" is set by core. Thus delete an extra initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] vcodec: mediatek: Add g/s_selection support for V4L2 Encoder

This patch add g/s_selection for MT8173 V4L2 Encoder.
Only output queue support g/s_selection to configure crop.
The top/left of active rectangle should always be (0,0)

Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media/i2c: Delete owner assignment

The field "owner" is set by core. Thus delete an extra initialisation.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] smiapp: Remove set_xclk() callback from hwconfig

The clock framework is generally so well supported that there's no reason
to keep this one around.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] smiapp: Switch to gpiod API for GPIO control

Switch from the old gpio API to the new descriptor based gpiod API.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] smiapp: Constify the regs argument to smiapp_write_8s()

The data may now be const as well.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] smiapp: Return -EPROBE_DEFER if the clock cannot be obtained

The clock may be provided by a driver which is yet to probe. Print the
actual error code as well.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] smiapp: Rename smiapp_platform_data as smiapp_hwconfig

This is really configuration to the driver originating from DT or
elsewhere. Do not call it platform data.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] smiapp: Unify enforced and need-based 8-bit read

Unify enforced 8-bit read access with that based on actual need.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx231xx-cards: unregister IR earlier

Without this patch, a bug is issued when the module is removed:

[ 1417.425863] cx231xx 1-3.1.4:1.1: Cx231xx dvb Extension removed
[ 1417.571923] BUG: unable to handle kernel paging request at ffffffffc081a024
[ 1417.571962] IP: [<ffffffff813da854>] string+0x24/0x80
[ 1417.571987] PGD 1c09067 PUD 1c0b067 PMD 88e653067 PTE 0
[ 1417.572013] Oops: 0000 [#1] SMP
[ 1417.572026] Modules linked in: mb86a20s dvb_core cx231xx_alsa ir_kbd_i2c(-) tda18271 tea5767 tuner cx25840 cx231xx i2c_mux videobuf_vmalloc tveeprom cx2341x videobuf_core rc_core v4l2_common videodev media bnep usblp fuse xt_CHECKSUM iptable_mangle tun ebtable_filter ebtables ip6table_filter ip6_tables xt_physdev br_netfilter bridge nf_log_ipv4 nf_log_common xt_LOG xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack cpufreq_stats vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_intel snd_hda_codec kvm snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm irqbypass crct10dif_pclmul iTCO_wdt crc32_pclmul nfsd hci_uart iTCO_vendor_support
[ 1417.572317]  snd_timer ghash_clmulni_intel btbcm intel_cstate btqca snd intel_uncore btintel intel_rapl_perf mei_me bluetooth mei shpchp soundcore pcspkr i2c_i801 auth_rpcgss wmi acpi_als kfifo_buf nfs_acl industrialio rfkill lockd pinctrl_sunrisepoint pinctrl_intel tpm_tis tpm intel_lpss_acpi intel_lpss acpi_pad grace sunrpc binfmt_misc hid_logitech_hidpp hid_logitech_dj 8021q garp stp llc mrp i915 i2c_algo_bit drm_kms_helper drm e1000e sdhci_pci sdhci mmc_core crc32c_intel ptp pps_core video i2c_hid fjes analog gameport joydev [last unloaded: rc_pixelview_002t]
[ 1417.572487] CPU: 4 PID: 24493 Comm: rmmod Tainted: G        W       4.7.0+ #2
[ 1417.572504] Hardware name:                  /NUC6i7KYB, BIOS KYSKLi70.86A.0041.2016.0817.1130 08/17/2016
[ 1417.572526] task: ffff880894b81e80 ti: ffff880896bdc000 task.ti: ffff880896bdc000
[ 1417.572544] RIP: 0010:[<ffffffff813da854>]  [<ffffffff813da854>] string+0x24/0x80
[ 1417.572564] RSP: 0018:ffff880896bdfbe8  EFLAGS: 00010286
[ 1417.572577] RAX: ffffffffc081a025 RBX: ffff8808935aa15c RCX: ffff0a00ffffff04
[ 1417.572594] RDX: ffffffffc081a024 RSI: ffffffffffffffff RDI: ffff8808935aa15c
[ 1417.572610] RBP: ffff880896bdfbe8 R08: fffffffffffffffe R09: ffff8808935aa91c
[ 1417.572628] R10: ffffffffc07b85d6 R11: 0000000000000000 R12: ffff8808935aa91c
[ 1417.572644] R13: 00000000000007c5 R14: ffffffffc07b85dd R15: ffffffffc07b85dd
[ 1417.572662] FS:  00007f5a5392d700(0000) GS:ffff8808bed00000(0000) knlGS:0000000000000000
[ 1417.572681] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1417.572705] CR2: ffffffffc081a024 CR3: 0000000897188000 CR4: 00000000003406e0
[ 1417.572735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1417.572761] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1417.572778] Stack:
[ 1417.572785]  ffff880896bdfc48 ffffffff813dcf77 0000000000000005 ffff8808935aa157
[ 1417.572806]  ffff880896bdfc58 ffff0a00ffffff04 000000009d27375e ffff8808935aa000
[ 1417.572829]  0000000000000800 ffff880896182800 0000000000000000 ffff88089e898ae0
[ 1417.572850] Call Trace:
[ 1417.572860]  [<ffffffff813dcf77>] vsnprintf+0x2d7/0x500
[ 1417.572873]  [<ffffffff813d3e12>] add_uevent_var+0x82/0x120
[ 1417.572890]  [<ffffffffc07b534d>] rc_dev_uevent+0x2d/0x60 [rc_core]
[ 1417.572907]  [<ffffffff81515969>] dev_uevent+0xd9/0x2d0
[ 1417.572921]  [<ffffffff813d4309>] kobject_uevent_env+0x2d9/0x4f0
[ 1417.572938]  [<ffffffff813d452b>] kobject_uevent+0xb/0x10
[ 1417.572954]  [<ffffffff81513a3f>] device_del+0x18f/0x260
[ 1417.572974]  [<ffffffff813d2db7>] ? kobject_put+0x27/0x50
[ 1417.572998]  [<ffffffffc07b5e25>] rc_unregister_device+0x75/0xb0 [rc_core]
[ 1417.573028]  [<ffffffffc07e6023>] ir_remove+0x23/0x30 [ir_kbd_i2c]
[ 1417.573055]  [<ffffffff8162bf88>] i2c_device_remove+0x58/0xb0
[ 1417.573078]  [<ffffffff81518191>] __device_release_driver+0xa1/0x160
[ 1417.573102]  [<ffffffff81518de6>] driver_detach+0xa6/0xb0
[ 1417.573122]  [<ffffffff81517b25>] bus_remove_driver+0x55/0xd0
[ 1417.573146]  [<ffffffff815195bc>] driver_unregister+0x2c/0x50
[ 1417.573168]  [<ffffffff8162cf62>] i2c_del_driver+0x22/0x50
[ 1417.573194]  [<ffffffffc07e6ba4>] ir_kbd_driver_exit+0x10/0x46c [ir_kbd_i2c]
[ 1417.573227]  [<ffffffff81126348>] SyS_delete_module+0x1b8/0x220
[ 1417.573254]  [<ffffffff817debf2>] entry_SYSCALL_64_fastpath+0x1a/0xa4
[ 1417.573279] Code: eb e9 76 ff ff ff 90 55 49 89 f1 48 89 ce 48 c1 fe 30 48 81 fa ff 0f 00 00 48 89 e5 4c 8d 46 ff 76 40 48 85 f6 74 4e 48 8d 42 01 <0f> b6 12 84 d2 74 43 49 01 c0 31 f6 eb 0c 48 83 c0 01 0f b6 50
[ 1417.573437] RIP  [<ffffffff813da854>] string+0x24/0x80
[ 1417.573455]  RSP <ffff880896bdfbe8>
[ 1417.573465] CR2: ffffffffc081a024
[ 1417.580053] ---[ end trace 4ca9e2eced326a62 ]---

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx231xx: can't proceed if I2C bus register fails

The driver should not ignore errors while registering the I2C
bus, as this device can't even minimally work without the buses,
as it uses those buses internally to talk with the several IP
blocks inside the chip.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx231xx-i2c: handle errors with cx231xx_get_i2c_adap()

The cx231xx_get_i2c_adap() function should return the I2C
adapter that will be used to talk with a device. It should never
be NULL, as otherwise the driver will try to dereference a
null pointer.

We might instead fix the callers, but if this condition
ever happens, it is really a driver bug, because i2c_port
should always be a value from enum CX231XX_I2C_MASTER_PORT.

Found when checking the code due to this bug:

[   39.769021] BUG: unable to handle kernel NULL pointer dereference at 0000000000000002
[   39.769105] IP: [<ffffffff81638393>] i2c_master_send+0x13/0x70

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx231xx-core: fix GPIO comments

The number of the cx231xx REQ for GPIO register set/get are wrong.
They should follow what's there at cx231xx-pcb-cfg.h.

Noticed while checking the cx231xx parser at the v4l-utils.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx231xx: prints error code if can't switch TV mode

If something bad happens when switching between digital
and analog mode, prints an error and outputs the returned code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx231xx: fix GPIOs for Pixelview SBTVD hybrid

This device uses GPIOs: 28 to switch between analog and
digital modes: on digital mode, it should be set to 1.

The code that sets it on analog mode is OK, but it misses
the logic that sets it on digital mode.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx231xx: don't return error on success

The cx231xx_set_agc_analog_digital_mux_select() callers
expect it to return 0 or an error. Returning a positive value
makes the first attempt to switch between analog/digital to fail.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mb86a20s: fix demod settings

With the current settings, only one channel locks properly.
That's likely because, when this driver was written, Brazil
were still using experimental transmissions.

Change it to reproduce the settings used by the newer drivers.
That makes it lock on other channels.

Tested with both PixelView SBTVD Hybrid (cx231xx-based) and
C3Tech Digital Duo HDTV/SDTV (em28xx-based) devices.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] mb86a20s: fix the locking logic

On this frontend, it takes a while to start output normal
TS data. That only happens on state S9. On S8, the TS output
is enabled, but it is not reliable enough.

However, the zigzag loop is too fast to let it sync.

As, on practical tests, the zigzag software loop doesn't
seem to be helping, but just slowing down the tuning, let's
switch to hardware algorithm, as the tuners used on such
devices are capable of work with frequency drifts without
any help from software.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] tea5767: use module prefix on printed messages

use pr_fmt() & friends for error messages to output like:

[    9.651721] tea5767: Chip ID is not zero. It is not a TEA5767

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] tda18271: use prefix on all printk messages

Some messages have a hardcoded prefix; others not. Use the
pr_fmt() to ensure that all messages will use the same prefix.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Merge branch 'docs-next' of git://git.lwn.net/linux into patchwork

* 'docs-next' of git://git.lwn.net/linux:
  doc-rst: define PDF's of the media folder
  doc-rst: generic way to build PDF of sub-folders
  docs: sphinx-extensions: add metadata parallel-safe
  docs-rst: kernel-doc: fix typedef output in RST format
  docs-rst: improve typedef parser
  docs: kernel-parameter: Improve the description of nr_cpus and maxcpus
  docs-rst: kernel-doc: better output struct members

Merge branch 'doc/4.9' into docs-next

doc-rst: define PDF's of the media folder

To build only the PDF of the media folder run::

  make SPHINXDIRS=media pdfdocs

Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

doc-rst: generic way to build PDF of sub-folders

This extends the method to build only sub-folders to the targets
"latexdocs" and "pdfdocs". To do so, a conf.py in the sub-folder is
required, where the latex_documents of the sub-folder are
defined. E.g. to build only gpu's PDF add the following to the
Documentation/gpu/conf.py::

  +latex_documents = [
  +    ("index", "gpu.tex", "Linux GPU Driver Developer's Guide",
  +     "The kernel development community", "manual"),
  +]

and run:

  make SPHINXDIRS=gpu pdfdocs

Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

docs: sphinx-extensions: add metadata parallel-safe

The setup() function of a Sphinx-extension can return a dictionary. This
is treated by Sphinx as metadata of the extension [1].

With metadata "parallel_read_safe = True" a extension is marked as
save for "parallel reading of source". This is needed if you want
build in parallel with N processes. E.g.:

  make SPHINXOPTS=-j4 htmldocs

will no longer log warnings like:

  WARNING: the foobar extension does not declare if it is safe for
  parallel reading, assuming it isn't - please ask the extension author
  to check and make it explicit.

Add metadata to extensions:

* kernel-doc
* flat-table
* kernel-include

[1] http://www.sphinx-doc.org/en/stable/extdev/#extension-metadata

Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Tested-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

docs-rst: kernel-doc: fix typedef output in RST format

When using a typedef function like this one:
typedef bool v4l2_check_dv_timings_fnc (const struct v4l2_dv_timings * t, void * handle);

The Sphinx C domain expects it to create a c:type: reference,
as that's the way it creates the type references when parsing
a c:function:: declaration.

So, a declaration like:

.. c:function:: bool v4l2_valid_dv_timings (const struct v4l2_dv_timings * t, const struct v4l2_dv_timings_cap * cap, v4l2_check_dv_timings_fnc fnc, void * fnc_handle)

Will create a cross reference for :c:type:`v4l2_check_dv_timings_fnc`.

So, when outputting such typedefs in RST format, we need to handle
this special case, as otherwise it will produce those warnings:

./include/media/v4l2-dv-timings.h:43: WARNING: c:type reference target not found: v4l2_check_dv_timings_fnc
./include/media/v4l2-dv-timings.h:60: WARNING: c:type reference target not found: v4l2_check_dv_timings_fnc
./include/media/v4l2-dv-timings.h:81: WARNING: c:type reference target not found: v4l2_check_dv_timings_fnc

So, change the kernel-doc script to produce a RST output for the
above typedef as:
.. c:type:: v4l2_check_dv_timings_fnc

   **Typedef**: timings check callback

**Syntax**

  ``bool v4l2_check_dv_timings_fnc (const struct v4l2_dv_timings * t, void * handle);``

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

docs-rst: improve typedef parser

Improve the parser to handle typedefs like:

typedef bool v4l2_check_dv_timings_fnc(const struct v4l2_dv_timings *t, void *handle);

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

docs: kernel-parameter: Improve the description of nr_cpus and maxcpus

From the old description people still can't get what's the exact
difference between nr_cpus and maxcpus. Especially in kdump kernel
nr_cpus is always suggested if it's implemented in the ARCH. The
reason is nr_cpus is used to limit the max number of possible cpu
in system, the sum of already plugged cpus and hot plug cpus can't
exceed its value. However maxcpus is used to limit how many cpus
are allowed to be brought up during bootup.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

[media] m2m-deinterlace: Fix error print during probe

v4l2_err() can not be used for printing error for missing interleaved
support in DMA as this point the pcdev->v4l2_dev is not valid.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] redrat3: fix sparse warning

Fix this sparse warning:

drivers/media/rc/redrat3.c:490:18: warning: incorrect type in assignment (different base types)
drivers/media/rc/redrat3.c:495:9: warning: cast to restricted __be32

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] drivers: hackrf: fixed a coding style issue

changed 'unsigned' to 'unsigned int' to obtain the coding style.

Signed-off-by: Jannik Becher <Becher.Jannik@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

docs-rst: kernel-doc: better output struct members

Right now, for a struct, kernel-doc produces the following output:

.. c:type:: struct v4l2_prio_state

   stores the priority states

**Definition**

::

  struct v4l2_prio_state {
    atomic_t prios[4];
  };

**Members**

``atomic_t prios[4]``
  array with elements to store the array priorities

Putting a member name in verbatim and adding a continuation line
causes the LaTeX output to generate something like:
item[atomic_t prios\[4\]] array with elements to store the array priorities

Everything inside "item" is non-breakable, with may produce
lines bigger than the column width.

Also, for function members, like:

        int (* rx_read) (struct v4l2_subdev *sd, u8 *buf, size_t count,ssize_t *num);

It puts the name of the member at the end, like:

        int (*) (struct v4l2_subdev *sd, u8 *buf, size_t count,ssize_t *num) read

With is very confusing.

The best is to highlight what really matters: the member name.
is a secondary information.

So, change kernel-doc, for it to produce the output on a different way:

**Members**

``prios[4]``

  array with elements to store the array priorities

Also, as the type is not part of LaTeX "item[]", LaTeX will split it into
multiple lines, if needed.

So, both LaTeX/PDF and HTML outputs will look good.

It should be noticed, however, that the way Sphinx LaTeX output handles
things like:

Foo
   bar

is different than the HTML output. On HTML, it will produce something
like:

**Foo**
   bar

While, on LaTeX, it puts both foo and bar at the same line, like:

**Foo** bar

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

[media] dvb_frontend: Use memdup_user() rather than duplicating its implementation

* Reuse existing functionality from memdup_user() instead of keeping
  duplicate source code.

  This issue was detected by using the Coccinelle software.

* Return directly if this copy operation failed.

* Replace the specification of data structures by pointer dereferences
  to make the corresponding size determination a bit safer according to
  the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] vb2: Fix vb2_core_dqbuf() kernel-doc

The kernel-doc has the wrong function name and also the pindex
parameter is missing in the documentation.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media: v4l2-ctrls: append missing h264 profile string

This appends missing "Stereo High" h264 profile string. Without
it the v4l2 compliance would crash kernel with NULL pointer
dereference at:

[   26.882278] [<ffff000008685cbc>] std_validate+0x378/0x42c
[   26.886967] [<ffff000008687424>] set_ctrl+0x8c/0x134
[   26.892521] [<ffff00000868755c>] v4l2_s_ctrl+0x90/0xf4
[   26.897555] [<ffff00000867f3b0>] v4l_s_ctrl+0x4c/0x110
[   26.902503] [<ffff00000867db04>] __video_do_ioctl+0x240/0x2b4
[   26.907625] [<ffff00000867d778>] video_usercopy+0x33c/0x46c
[   26.913441] [<ffff00000867d8bc>] video_ioctl2+0x14/0x1c
[   26.918822] [<ffff000008678878>] v4l2_ioctl+0xe0/0x110
[   26.924032] [<ffff0000081da898>] do_vfs_ioctl+0xb4/0x764
[   26.929238] [<ffff0000081dafcc>] SyS_ioctl+0x84/0x98
[   26.934707] [<ffff000008082f4c>] __sys_trace_return+0x0/0x4

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media-types.rst: fix typo

Fix copy-and-paste error: the radio devices are /dev/radio, not /dev/vbi.

Signed-off-by: Hans Verkuil <<hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] helene: fix memory leak when heleno_x_pon fails

The error return path of failed calls to heleno_x_pon leak
memory because priv is not kfree'd.  Fix this by kfree'ing
priv before returning.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging: media: lirc: lirc_sasem: don't print error when allocating urb fails

kmalloc will print enough information in case of failure.

Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] staging: media: lirc: lirc_imon: don't print error when allocating urb fails

kmalloc will print enough information in case of failure.

Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l2-async: remove unneeded .registered_async callback

The v4l2_subdev_core_ops .registered_async callback was added to notify
a subdev when its entity has been registered with the media device, to
allow for example to modify the media graph (i.e: adding entities/links).

But that's not needed since there is already a .registered callback in
struct v4l2_subdev_internal_ops that's called after the entity has been
registered with the media device in v4l2_device_register_subdev().

Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] tvp5150: use sd internal ops .registered instead .registered_async

The driver is using the struct v4l2_subdev_core_ops .registered_async
callback to register the connector entities and create the pad links
after the subdev entity has been registered with the media device.

But the .registered_async callback isn't needed since the v4l2 core
already calls the struct v4l2_subdev_internal_ops .registered callback
in v4l2_device_register_subdev(), after media_device_register_entity().

So, use the .registered() callback instead of the .registered_async()
that is going to be removed in a following patch since isn't needed.

Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] v4l: Do not allow re-registering sub-devices

Albeit not prohibited explicitly, re-registering sub-devices generated a
big, loud warning which quite likely soon was followed by a crash. What
followed was re-initialising a media entity, driver's registered() callback
being called and re-adding a list entry to a list.

Prevent this by returning an error if a sub-device is already registered.

[mchehab@s-opensource.com: reorder logic to check if !sd before dereferencing it]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media-entity.h: remove redundant macro definition for gobj_to_pad()

The macro gobj_to_pad() is defined twice in media-entity.h.
Let's remove one.

Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media-entity.h: Correct KernelDoc of media_entity_enum_empty()

The function media_entity_enum_empty() returns true when the bitmap
of the input parameter media entity enumeration is empty instead of marked.
This patch corrects the return value description of the function.

Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] media-entity.h: remove redundant macro definition for gobj_to_link()

The macro gobj_to_link() is defined twice in media-entity.h.
Let's remove one.

Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] drxd_hard: Add missing error code assignment before test

It is likely that checking the result of the 2nd 'read16' is expected here.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] cx23885: Add support for Hauppauge WinTV quadHD ATSC version

Add support for the Hauppauge WinTV quadHD ATSC version.
IR support has not been provided, all 4 tuners, demodulators etc are working.
Further documentation can be found on Linux TV wiki.

Signed-off-by: Stephen Backway <stev391@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[media] rcar-fcp: Make sure rcar_fcp_enable() returns 0 on success

When resuming from suspend-to-RAM on r8a7795/salvator-x:

    dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
    PM: Device fe940000.fdp1 failed to resume noirq: error 1
    dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
    PM: Device fe944000.fdp1 failed to resume noirq: error 1
    dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
    PM: Device fe948000.fdp1 failed to resume noirq: error 1

According to its documentation, rcar_fcp_enable() returns 0 on success
or a negative error code if an error occurs.  Hence
fdp1_pm_runtime_resume() and vsp1_pm_runtime_resume() forward its return
value to their callers.

However, rcar_fcp_enable() forwards the return value of
pm_runtime_get_sync(), which can actually be 1 on success, leading to
the resume failure above.

To fix this, consider only negative values returned by
pm_runtime_get_sync() to be failures.

Fixes: 7b49235e83b2347c ("[media] v4l: Add Renesas R-Car FCP driver")

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>