Michal Kubeček [Thu, 29 Jun 2017 09:13:36 +0000 (11:13 +0200)]
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
Recently I started seeing warnings about pages with refcount -1. The
problem was traced to packets being reused after their head was merged into
a GRO packet by skb_gro_receive(). While bisecting the issue pointed to
commit
c21b48cc1bbf ("net: adjust skb->truesize in ___pskb_trim()") and
I have never seen it on a kernel with it reverted, I believe the real
problem appeared earlier when the option to merge head frag in GRO was
implemented.
Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE
branch of napi_skb_finish() so that if the driver uses napi_gro_frags()
and head is merged (which in my case happens after the skb_condense()
call added by the commit mentioned above), the skb is reused including the
head that has been merged. As a result, we release the page reference
twice and eventually end up with negative page refcount.
To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish()
the same way it's done in napi_skb_finish().
Fixes:
d7e8883cfcf4 ("net: make GRO aware of skb->head_frag")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Thu, 29 Jun 2017 01:04:59 +0000 (03:04 +0200)]
bpf: prevent leaking pointer via xadd on unpriviledged
Leaking kernel addresses on unpriviledged is generally disallowed,
for example, verifier rejects the following:
0: (b7) r0 = 0
1: (18) r2 = 0xffff897e82304400
3: (7b) *(u64 *)(r1 +48) = r2
R2 leaks addr into ctx
Doing pointer arithmetic on them is also forbidden, so that they
don't turn into unknown value and then get leaked out. However,
there's xadd as a special case, where we don't check the src reg
for being a pointer register, e.g. the following will pass:
0: (b7) r0 = 0
1: (7b) *(u64 *)(r1 +48) = r0
2: (18) r2 = 0xffff897e82304400 ; map
4: (db) lock *(u64 *)(r1 +48) += r2
5: (95) exit
We could store the pointer into skb->cb, loose the type context,
and then read it out from there again to leak it eventually out
of a map value. Or more easily in a different variant, too:
0: (bf) r6 = r1
1: (7a) *(u64 *)(r10 -8) = 0
2: (bf) r2 = r10
3: (07) r2 += -8
4: (18) r1 = 0x0
6: (85) call bpf_map_lookup_elem#1
7: (15) if r0 == 0x0 goto pc+3
R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp
8: (b7) r3 = 0
9: (7b) *(u64 *)(r0 +0) = r3
10: (db) lock *(u64 *)(r0 +0) += r6
11: (b7) r0 = 0
12: (95) exit
from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp
11: (b7) r0 = 0
12: (95) exit
Prevent this by checking xadd src reg for pointer types. Also
add a couple of test cases related to this.
Fixes:
1be7f75d1668 ("bpf: enable non-root eBPF programs")
Fixes:
17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 29 Jun 2017 19:18:38 +0000 (15:18 -0400)]
Merge branch 'arcnet-fixes'
Michael Grzeschik says:
====================
arcnet: Collection of latest fixes
Here we sum up the recent fixes I collected on the way to use and
stabilise the framework. Part of it is an possible deadlock that we
prevent as well to fix the calculation of the dev_id that can be setup
by an rotary encoder. Beside that we added an trivial spelling patch and
fix some wrong and missing assignments that improves the code footprint.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Grzeschik [Wed, 28 Jun 2017 16:28:37 +0000 (18:28 +0200)]
arcnet: com20020-pci: add missing pdev setup in netdev structure
We add the pdev data to the pci devices netdev structure. This way
the interface get consistent device names in the userspace (udev).
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Grzeschik [Wed, 28 Jun 2017 16:28:36 +0000 (18:28 +0200)]
arcnet: com20020-pci: fix dev_id calculation
The dev_id was miscalculated. Only the two bits 4-5 are relevant for the
MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Grzeschik [Wed, 28 Jun 2017 16:28:35 +0000 (18:28 +0200)]
arcnet: com20020: remove needless base_addr assignment
The assignment is superfluous.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 28 Jun 2017 16:28:34 +0000 (18:28 +0200)]
Trivial fix to spelling mistake in arc_printk message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Grzeschik [Wed, 28 Jun 2017 16:28:33 +0000 (18:28 +0200)]
arcnet: change irq handler to lock irqsave
This patch prevents the arcnet driver from the following deadlock.
[ 41.273910] ======================================================
[ 41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[ 41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted
[ 41.292366] ------------------------------------------------------
[ 41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire:
[ 41.305628] (&(&lp->lock)->rlock){+.+...}, at: [<
bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[ 41.315199]
[ 41.315199] and this task is already holding:
[ 41.321324] (_xmit_ARCNET#2){+.-...}, at: [<
c06b934c>] packet_direct_xmit+0xfc/0x1c8
[ 41.329593] which would create a new lock dependency:
[ 41.334893] (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...}
[ 41.341801]
[ 41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock:
[ 41.350108] (_xmit_ARCNET#2){+.-...}
... which became SOFTIRQ-irq-safe at:
[ 41.357539] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.362677] [<
c063ab8c>] dev_watchdog+0x5c/0x264
[ 41.367723] [<
c0094edc>] call_timer_fn+0x6c/0xf4
[ 41.372759] [<
c00950b8>] run_timer_softirq+0x154/0x210
[ 41.378340] [<
c0036b30>] __do_softirq+0x144/0x298
[ 41.383469] [<
c0036fb4>] irq_exit+0xcc/0x130
[ 41.388138] [<
c0085c50>] __handle_domain_irq+0x60/0xb4
[ 41.393728] [<
c0014578>] __irq_svc+0x58/0x78
[ 41.398402] [<
c0010274>] arch_cpu_idle+0x24/0x3c
[ 41.403443] [<
c007127c>] cpu_startup_entry+0x1f8/0x25c
[ 41.409029] [<
c09adc90>] start_kernel+0x3c0/0x3cc
[ 41.414170]
[ 41.414170] to a SOFTIRQ-irq-unsafe lock:
[ 41.419931] (&(&lp->lock)->rlock){+.+...}
... which became SOFTIRQ-irq-unsafe at:
[ 41.427996] ... [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.433409] [<
bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.439646] [<
c0089120>] handle_nested_irq+0x8c/0xec
[ 41.445063] [<
c03c1170>] regmap_irq_thread+0x190/0x314
[ 41.450661] [<
c0087244>] irq_thread_fn+0x1c/0x34
[ 41.455700] [<
c0087548>] irq_thread+0x13c/0x1dc
[ 41.460649] [<
c0050f10>] kthread+0xe4/0xf8
[ 41.465158] [<
c000f810>] ret_from_fork+0x14/0x24
[ 41.470207]
[ 41.470207] other info that might help us debug this:
[ 41.470207]
[ 41.478627] Possible interrupt unsafe locking scenario:
[ 41.478627]
[ 41.485763] CPU0 CPU1
[ 41.490521] ---- ----
[ 41.495279] lock(&(&lp->lock)->rlock);
[ 41.499414] local_irq_disable();
[ 41.505636] lock(_xmit_ARCNET#2);
[ 41.511967] lock(&(&lp->lock)->rlock);
[ 41.518741] <Interrupt>
[ 41.521490] lock(_xmit_ARCNET#2);
[ 41.525356]
[ 41.525356] *** DEADLOCK ***
[ 41.525356]
[ 41.531587] 1 lock held by arcecho/233:
[ 41.535617] #0: (_xmit_ARCNET#2){+.-...}, at: [<
c06b934c>] packet_direct_xmit+0xfc/0x1c8
[ 41.544355]
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
[ 41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 {
[ 41.557357] HARDIRQ-ON-W at:
[ 41.560664] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.567445] [<
c063ba28>] dev_deactivate_many+0x114/0x304
[ 41.574866] [<
c063bc3c>] dev_deactivate+0x24/0x38
[ 41.581646] [<
c0630374>] linkwatch_do_dev+0x40/0x74
[ 41.588613] [<
c06305d8>] __linkwatch_run_queue+0xec/0x140
[ 41.596120] [<
c0630658>] linkwatch_event+0x2c/0x34
[ 41.602991] [<
c004af30>] process_one_work+0x188/0x40c
[ 41.610131] [<
c004b200>] worker_thread+0x4c/0x480
[ 41.616912] [<
c0050f10>] kthread+0xe4/0xf8
[ 41.623048] [<
c000f810>] ret_from_fork+0x14/0x24
[ 41.629735] IN-SOFTIRQ-W at:
[ 41.633039] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.639820] [<
c063ab8c>] dev_watchdog+0x5c/0x264
[ 41.646508] [<
c0094edc>] call_timer_fn+0x6c/0xf4
[ 41.653190] [<
c00950b8>] run_timer_softirq+0x154/0x210
[ 41.660425] [<
c0036b30>] __do_softirq+0x144/0x298
[ 41.667201] [<
c0036fb4>] irq_exit+0xcc/0x130
[ 41.673518] [<
c0085c50>] __handle_domain_irq+0x60/0xb4
[ 41.680754] [<
c0014578>] __irq_svc+0x58/0x78
[ 41.687077] [<
c0010274>] arch_cpu_idle+0x24/0x3c
[ 41.693769] [<
c007127c>] cpu_startup_entry+0x1f8/0x25c
[ 41.701006] [<
c09adc90>] start_kernel+0x3c0/0x3cc
[ 41.707791] INITIAL USE at:
[ 41.711003] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.717696] [<
c063ba28>] dev_deactivate_many+0x114/0x304
[ 41.725026] [<
c063bc3c>] dev_deactivate+0x24/0x38
[ 41.731718] [<
c0630374>] linkwatch_do_dev+0x40/0x74
[ 41.738593] [<
c06305d8>] __linkwatch_run_queue+0xec/0x140
[ 41.746011] [<
c0630658>] linkwatch_event+0x2c/0x34
[ 41.752789] [<
c004af30>] process_one_work+0x188/0x40c
[ 41.759847] [<
c004b200>] worker_thread+0x4c/0x480
[ 41.766541] [<
c0050f10>] kthread+0xe4/0xf8
[ 41.772596] [<
c000f810>] ret_from_fork+0x14/0x24
[ 41.779198] }
[ 41.780945] ... key at: [<
c124d620>] netdev_xmit_lock_key+0x38/0x1c8
[ 41.788192] ... acquired at:
[ 41.791309] [<
c007bed8>] lock_acquire+0x70/0x90
[ 41.796361] [<
c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[ 41.802324] [<
bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[ 41.808844] [<
c06b9380>] packet_direct_xmit+0x130/0x1c8
[ 41.814622] [<
c06bc7e4>] packet_sendmsg+0x3b8/0x680
[ 41.820034] [<
c05fe8b0>] sock_sendmsg+0x14/0x24
[ 41.825091] [<
c05ffd68>] SyS_sendto+0xb8/0xe0
[ 41.829956] [<
c05ffda8>] SyS_send+0x18/0x20
[ 41.834638] [<
c000f780>] ret_fast_syscall+0x0/0x1c
[ 41.839954]
[ 41.841514]
the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[ 41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 {
[ 41.855644] HARDIRQ-ON-W at:
[ 41.858945] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.865726] [<
bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.873607] [<
c0089120>] handle_nested_irq+0x8c/0xec
[ 41.880666] [<
c03c1170>] regmap_irq_thread+0x190/0x314
[ 41.887901] [<
c0087244>] irq_thread_fn+0x1c/0x34
[ 41.894593] [<
c0087548>] irq_thread+0x13c/0x1dc
[ 41.901195] [<
c0050f10>] kthread+0xe4/0xf8
[ 41.907338] [<
c000f810>] ret_from_fork+0x14/0x24
[ 41.914025] SOFTIRQ-ON-W at:
[ 41.917328] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.924106] [<
bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.931981] [<
c0089120>] handle_nested_irq+0x8c/0xec
[ 41.939028] [<
c03c1170>] regmap_irq_thread+0x190/0x314
[ 41.946264] [<
c0087244>] irq_thread_fn+0x1c/0x34
[ 41.952954] [<
c0087548>] irq_thread+0x13c/0x1dc
[ 41.959548] [<
c0050f10>] kthread+0xe4/0xf8
[ 41.965689] [<
c000f810>] ret_from_fork+0x14/0x24
[ 41.972379] INITIAL USE at:
[ 41.975595] [<
c06f8fc8>] _raw_spin_lock+0x30/0x40
[ 41.982283] [<
bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[ 41.990063] [<
c0089120>] handle_nested_irq+0x8c/0xec
[ 41.997027] [<
c03c1170>] regmap_irq_thread+0x190/0x314
[ 42.004172] [<
c0087244>] irq_thread_fn+0x1c/0x34
[ 42.010766] [<
c0087548>] irq_thread+0x13c/0x1dc
[ 42.017267] [<
c0050f10>] kthread+0xe4/0xf8
[ 42.023314] [<
c000f810>] ret_from_fork+0x14/0x24
[ 42.029903] }
[ 42.031648] ... key at: [<
bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet]
[ 42.039255] ... acquired at:
[ 42.042372] [<
c007bed8>] lock_acquire+0x70/0x90
[ 42.047413] [<
c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[ 42.053364] [<
bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[ 42.059872] [<
c06b9380>] packet_direct_xmit+0x130/0x1c8
[ 42.065634] [<
c06bc7e4>] packet_sendmsg+0x3b8/0x680
[ 42.071030] [<
c05fe8b0>] sock_sendmsg+0x14/0x24
[ 42.076069] [<
c05ffd68>] SyS_sendto+0xb8/0xe0
[ 42.080926] [<
c05ffda8>] SyS_send+0x18/0x20
[ 42.085601] [<
c000f780>] ret_fast_syscall+0x0/0x1c
[ 42.090918]
[ 42.092481]
[ 42.092481] stack backtrace:
[ 42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536
[ 42.104751] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 42.111183] [<
c0017ec8>] (unwind_backtrace) from [<
c00139d0>] (show_stack+0x10/0x14)
[ 42.119337] [<
c00139d0>] (show_stack) from [<
c02a82c4>] (dump_stack+0x8c/0x9c)
[ 42.126937] [<
c02a82c4>] (dump_stack) from [<
c0078260>] (check_usage+0x4bc/0x63c)
[ 42.134815] [<
c0078260>] (check_usage) from [<
c0078438>] (check_irq_usage+0x58/0xb0)
[ 42.142964] [<
c0078438>] (check_irq_usage) from [<
c007aaa0>] (__lock_acquire+0x1524/0x20b0)
[ 42.151740] [<
c007aaa0>] (__lock_acquire) from [<
c007bed8>] (lock_acquire+0x70/0x90)
[ 42.159886] [<
c007bed8>] (lock_acquire) from [<
c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54)
[ 42.168768] [<
c06f9140>] (_raw_spin_lock_irqsave) from [<
bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet])
[ 42.179115] [<
bf083bc8>] (arcnet_send_packet [arcnet]) from [<
c06b9380>] (packet_direct_xmit+0x130/0x1c8)
[ 42.189182] [<
c06b9380>] (packet_direct_xmit) from [<
c06bc7e4>] (packet_sendmsg+0x3b8/0x680)
[ 42.198059] [<
c06bc7e4>] (packet_sendmsg) from [<
c05fe8b0>] (sock_sendmsg+0x14/0x24)
[ 42.206199] [<
c05fe8b0>] (sock_sendmsg) from [<
c05ffd68>] (SyS_sendto+0xb8/0xe0)
[ 42.213978] [<
c05ffd68>] (SyS_sendto) from [<
c05ffda8>] (SyS_send+0x18/0x20)
[ 42.221388] [<
c05ffda8>] (SyS_send) from [<
c000f780>] (ret_fast_syscall+0x0/0x1c)
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
v1 -> v2: removed unneeded zero assignment of flags
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 28 Jun 2017 11:44:21 +0000 (14:44 +0300)]
rocker: move dereference before free
My static checker complains that ofdpa_neigh_del() can sometimes free
"found". It just makes sense to use it first before deleting it.
Fixes:
ecf244f753e0 ("rocker: fix maybe-uninitialized warning")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 28 Jun 2017 06:03:12 +0000 (09:03 +0300)]
mlxsw: spectrum_router: Fix NULL pointer dereference
In case a VLAN device is enslaved to a bridge we shouldn't create a
router interface (RIF) for it when it's configured with an IP address.
This is already handled by the driver for other types of netdevs, such
as physical ports and LAG devices.
If this IP address is then removed and the interface is subsequently
unlinked from the bridge, a NULL pointer dereference can happen, as the
original 802.1d FID was replaced with an rFID which was then deleted.
To reproduce:
$ ip link set dev enp3s0np9 up
$ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111
$ ip link set dev enp3s0np9.111 up
$ ip link add name br0 type bridge
$ ip link set dev br0 up
$ ip link set enp3s0np9.111 master br0
$ ip address add dev enp3s0np9.111 192.168.0.1/24
$ ip address del dev enp3s0np9.111 192.168.0.1/24
$ ip link set dev enp3s0np9.111 nomaster
Fixes:
99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Petr Machata <petrm@mellanox.com>
Tested-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Wed, 28 Jun 2017 04:53:54 +0000 (12:53 +0800)]
net: sched: Fix one possible panic when no destroy callback
When qdisc fail to init, qdisc_create would invoke the destroy callback
to cleanup. But there is no check if the callback exists really. So it
would cause the panic if there is no real destroy callback like the qdisc
codel, fq, and so on.
Take codel as an example following:
When a malicious user constructs one invalid netlink msg, it would cause
codel_init->codel_change->nla_parse_nested failed.
Then kernel would invoke the destroy callback directly but qdisc codel
doesn't define one. It causes one panic as a result.
Now add one the check for destroy to avoid the possible panic.
Fixes:
87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 28 Jun 2017 01:51:03 +0000 (09:51 +0800)]
virtio-net: serialize tx routine during reset
We don't hold any tx lock when trying to disable TX during reset, this
would lead a use after free since ndo_start_xmit() tries to access
the virtqueue which has already been freed. Fix this by using
netif_tx_disable() before freeing the vqs, this could make sure no tx
after vq freeing.
Reported-by: Jean-Philippe Menil <jpmenil@gmail.com>
Tested-by: Jean-Philippe Menil <jpmenil@gmail.com>
Fixes commit
f600b6905015 ("virtio_net: Add XDP support")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Robert McCabe <robert.mccabe@rockwellcollins.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew F. Davis [Mon, 26 Jun 2017 17:41:20 +0000 (12:41 -0500)]
net: usb: asix88179_178a: Add support for the Belkin B2B128
The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the
Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet
chip supported by this driver, add the USB ID for the same.
This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com>
who has indicated they would like this upstreamed by someone more
familiar with the upstreaming process.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Mon, 26 Jun 2017 15:47:00 +0000 (18:47 +0300)]
fsl/fman: add dependency on HAS_DMA
A previous commit (
5567e989198b5a8d) inserted a dependency on DMA
API that requires HAS_DMA to be added in Kconfig.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 27 Jun 2017 14:02:20 +0000 (07:02 -0700)]
net: prevent sign extension in dev_get_stats()
Similar to the fix provided by Dominik Heidler in commit
9b3dc0a17d73 ("l2tp: cast l2tp traffic counter to unsigned")
we need to take care of 32bit kernels in dev_get_stats().
When using atomic_long_read(), we add a 'long' to u64 and
might misinterpret high order bit, unless we cast to unsigned.
Fixes:
caf586e5f23ce ("net: add a core netdev->rx_dropped counter")
Fixes:
015f0688f57ca ("net: net: add a core netdev->tx_dropped counter")
Fixes:
6e7333d315a76 ("net: add rx_nohandler stat counter")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Sun, 25 Jun 2017 06:50:30 +0000 (23:50 -0700)]
tcp: reset sk_rx_dst in tcp_disconnect()
We have to reset the sk->sk_rx_dst when we disconnect a TCP
connection, because otherwise when we re-connect it this
dst reference is simply overridden in tcp_finish_connect().
This fixes a dst leak which leads to a loopback dev refcnt
leak. It is a long-standing bug, Kevin reported a very similar
(if not same) bug before. Thanks to Andrei for providing such
a reliable reproducer which greatly narrows down the problem.
Fixes:
41063e9dd119 ("ipv4: Early TCP socket demux.")
Reported-by: Andrei Vagin <avagin@gmail.com>
Reported-by: Kevin Xu <kaiwen.xu@hulu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Fri, 23 Jun 2017 22:25:37 +0000 (15:25 -0700)]
net: ipv6: reset daddr and dport in sk if connect() fails
In __ip6_datagram_connect(), reset sk->sk_v6_daddr and inet->dport if
error occurs.
In udp_v6_early_demux(), check for sk_state to make sure it is in
TCP_ESTABLISHED state.
Together, it makes sure unconnected UDP socket won't be considered as a
valid candidate for early demux.
v3: add TCP_ESTABLISHED state check in udp_v6_early_demux()
v2: fix compilation error
Fixes:
5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Sat, 24 Jun 2017 12:37:00 +0000 (15:37 +0300)]
bnx2x: Don't log mc removal needlessly
When mc configuration changes bnx2x_config_mcast() can return 0 for
success, negative for failure and positive for benign reason preventing
its immediate work, e.g., when the command awaits the completion of
a previously sent command.
When removing all configured macs on a 578xx adapter, if a positive
value would be returned driver would errneously log it as an error.
Fixes:
c7b7b483ccc9 ("bnx2x: Don't flush multicast MACs")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 23 Jun 2017 18:48:28 +0000 (14:48 -0400)]
Merge branch 'bnxt_en-fixes'
Michael Chan says:
====================
bnxt_en: Error handling and netpoll fixes.
Add missing error handling and fix netpoll handling. The current code
handles RX and TX events in netpoll mode and is causing lots of warnings
and errors in the RX code path in netpoll mode. The fix is to only handle
TX events in netpoll mode.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 23 Jun 2017 18:01:01 +0000 (14:01 -0400)]
bnxt_en: Fix netpoll handling.
To handle netpoll properly, the driver must only handle TX packets
during NAPI. Handling RX events cause warnings and errors in
netpoll mode. The ndo_poll_controller() method should call
napi_schedule() directly so that a NAPI weight of zero will be used
during netpoll mode.
The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx.
In separate rx/tx mode, the ndo_poll_controller() method will only
process the tx rings. In combined mode, the rx and tx completion
entries are mixed in the completion ring and we need to drop the rx
entries and recycle the rx buffers.
Add a function bnxt_force_rx_discard() to handle this in netpoll mode
when we see rx entries in combined ring mode.
Reported-by: Calvin Owens <calvinowens@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 23 Jun 2017 18:01:00 +0000 (14:01 -0400)]
bnxt_en: Add missing logic to handle TPA end error conditions.
When we get a TPA_END completion to handle a completed LRO packet, it
is possible that hardware would indicate errors. The current code is
not checking for the error condition. Define the proper error bits and
the macro to check for this error and abort properly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Fri, 23 Jun 2017 15:51:31 +0000 (17:51 +0200)]
net: dp83640: Avoid NULL pointer dereference.
The function, skb_complete_tx_timestamp(), used to allow passing in a
NULL pointer for the time stamps, but that was changed in commit
62bccb8cdb69051b95a55ab0c489e3cab261c8ef ("net-timestamp: Make the
clone operation stand-alone from phy timestamping"), and the existing
call sites, all of which are in the dp83640 driver, were fixed up.
Even though the kernel-doc was subsequently updated in commit
7a76a021cd5a292be875fbc616daf03eab1e6996 ("net-timestamp: Update
skb_complete_tx_timestamp comment"), still a bug fix from Manfred
Rudigier came into the driver using the old semantics. Probably
Manfred derived that patch from an older kernel version.
This fix should be applied to the stable trees as well.
Fixes:
81e8f2e930fe ("net: dp83640: Fix tx timestamp overflow handling.")
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 23 Jun 2017 18:11:26 +0000 (14:11 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2017-06-23
1) Fix xfrm garbage collecting when unregistering a netdevice.
From Hangbin Liu.
2) Fix NULL pointer derefernce when exiting a network namespace.
From Hangbin Liu.
3) Fix some error codes in pfkey to prevent a NULL pointer derefernce.
From Dan Carpenter.
4) Fix NULL pointer derefernce on allocation failure in pfkey.
From Dan Carpenter.
5) Adjust IPv6 payload_len to include extension headers. Otherwise
we corrupt the packets when doing ESP GRO on transport mode.
From Yossi Kuperman.
6) Set nhoff to the proper offset of the IPv6 nexthdr when doing ESP GRO.
From Yossi Kuperman.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Thu, 22 Jun 2017 22:29:33 +0000 (15:29 -0700)]
sit: use __GFP_NOWARN for user controlled allocation
The memory allocation size is controlled by user-space,
if it is too large just fail silently and return NULL,
not to mention there is a fallback allocation later.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Mon, 19 Jun 2017 11:03:43 +0000 (13:03 +0200)]
net: account for current skb length when deciding about UFO
Our customer encountered stuck NFS writes for blocks starting at specific
offsets w.r.t. page boundary caused by networking stack sending packets via
UFO enabled device with wrong checksum. The problem can be reproduced by
composing a long UDP datagram from multiple parts using MSG_MORE flag:
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 1000, MSG_MORE, ...);
sendto(sd, buff, 3000, 0, ...);
Assume this packet is to be routed via a device with MTU 1500 and
NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(),
this condition is tested (among others) to decide whether to call
ip_ufo_append_data():
((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))
At the moment, we already have skb with 1028 bytes of data which is not
marked for GSO so that the test is false (fragheaderlen is usually 20).
Thus we append second 1000 bytes to this skb without invoking UFO. Third
sendto(), however, has sufficient length to trigger the UFO path so that we
end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb()
uses udp_csum() to calculate the checksum but that assumes all fragments
have correct checksum in skb->csum which is not true for UFO fragments.
When checking against MTU, we need to add skb->len to length of new segment
if we already have a partially filled skb and fragheaderlen only if there
isn't one.
In the IPv6 case, skb can only be null if this is the first segment so that
we have to use headersize (length of the first IPv6 header) rather than
fragheaderlen (length of IPv6 header of further fragments) for skb == NULL.
Fixes:
e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Fixes:
e4c5e13aa45c ("ipv6: Should use consistent conditional judgement for
ip6 fragment between __ip6_append_data and ip6_finish_output")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets [Thu, 22 Jun 2017 09:50:41 +0000 (10:50 +0100)]
sfc: Fix MCDI command size for filter operations
The 8000 series adapters uses catch-all filters for encapsulated traffic
to support filtering VXLAN, NVGRE and GENEVE traffic.
This new filter functionality requires a longer MCDI command.
This patch increases the size of buffers on stack that were missed, which
fixes a kernel panic from the stack protector.
Fixes:
9b41080125176 ("sfc: insert catch-all filters for encapsulated traffic")
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Bert Kenward bkenward@solarflare.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 21 Jun 2017 22:16:37 +0000 (00:16 +0200)]
netvsc: don't access netdev->num_rx_queues directly
This structure member is hidden behind CONFIG_SYSFS, and we
get a build error when that is disabled:
drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_channels':
drivers/net/hyperv/netvsc_drv.c:754:49: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'?
drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_rxfh':
drivers/net/hyperv/netvsc_drv.c:1181:25: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'?
As the value is only set once to the argument of alloc_netdev_mq(),
we can compare against that constant directly.
Fixes:
ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Fixes:
2b01888d1b45 ("netvsc: allow more flexible setting of number of channels")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Wed, 21 Jun 2017 21:34:58 +0000 (14:34 -0700)]
ipv6: avoid unregistering inet6_dev for loopback
The per netns loopback_dev->ip6_ptr is unregistered and set to
NULL when its mtu is set to smaller than IPV6_MIN_MTU, this
leads to that we could set rt->rt6i_idev NULL after a
rt6_uncached_list_flush_dev() and then crash after another
call.
In this case we should just bring its inet6_dev down, rather
than unregistering it, at least prior to commit
176c39af29bc
("netns: fix addrconf_ifdown kernel panic") we always
override the case for loopback.
Thanks a lot to Andrey for finding a reliable reproducer.
Fixes:
176c39af29bc ("netns: fix addrconf_ifdown kernel panic")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Daniel Lezcano <dlezcano@fr.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 22 Jun 2017 15:17:43 +0000 (11:17 -0400)]
Merge branch 'macvlan-Fix-some-issues-with-changing-mac-addresses'
Vladislav Yasevich says:
====================
macvlan: Fix some issues with changing mac addresses
There are some issues in macvlan wrt to changing it's mac address.
* An error is returned in the specified address is the same as an already
assigned address.
* In passthru mode, the mac address of the macvlan device doesn't change.
* After changing the mac address of a passthru macvlan and then removing it,
the mac address of the physical device remains changed.
This patch series attempts to resolve these issues.
V2: Address a small issue in p4 where we save the address from the lowerdev
(from girish.moodalbail@oracle.com)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Wed, 21 Jun 2017 11:59:19 +0000 (07:59 -0400)]
macvlan: Let passthru macvlan correctly restore lower mac address
Passthru macvlans directly change the mac address of the lower
level device. That's OK, but after the macvlan is deleted,
the lower device is left with changed address and one needs to
reboot to bring back the origina HW addresses.
This scenario is actually quite common with passthru macvtap devices.
This patch attempts to solve this, by storing the mac address
of the lower device in macvlan_port structure and keeping track of
it through the changes.
After this patch, any changes to the lower device mac address
done trough the macvlan device, will be reverted back. Any
changs done directly to the lower device mac address will be kept.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Wed, 21 Jun 2017 11:59:18 +0000 (07:59 -0400)]
macvlan: convert port passthru to flags.
Convert the port passthru boolean into flags with accesor functions.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Wed, 21 Jun 2017 11:59:17 +0000 (07:59 -0400)]
macvlan: Fix passthru macvlan mac address inheritance
When a lower device of the passthru macvlan changes it's address,
passthru macvlan is supposed to change it's own address as well.
However, that doesn't happen correctly because the check in
macvlan_addr_busy() will catch the fact that the lower level
(port) mac address is the same as the address we are trying to
assign to the macvlan, and return an error. As a reasult,
the address of the passthru macvlan device is never changed.
The same thing happens when the user attempts to change the
mac address of the passthru macvlan.
The simple solution appers to be to not check against
the lower device in case of passthru macvlan device, since
the 2 addresses are _supposed_ to be the same.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Wed, 21 Jun 2017 11:59:16 +0000 (07:59 -0400)]
macvlan: Do not return error when setting the same mac address
The user currently gets an EBUSY error when attempting to set
the mac address on a macvlan device to the same value.
This should really be a no-op as nothing changes. Catch
the condition and return early.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Liu [Wed, 21 Jun 2017 09:21:22 +0000 (10:21 +0100)]
xen-netback: correctly schedule rate-limited queues
Add a flag to indicate if a queue is rate-limited. Test the flag in
NAPI poll handler and avoid rescheduling the queue if true, otherwise
we risk locking up the host. The rescheduling will be done in the
timer callback function.
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Serhey Popovych [Wed, 21 Jun 2017 09:12:24 +0000 (12:12 +0300)]
veth: Be more robust on network device creation when no attributes
There are number of problems with configuration peer
network device in absence of IFLA_VETH_PEER attributes
where attributes for main network device shared with
peer.
First it is not feasible to configure both network
devices with same MAC address since this makes
communication in such configuration problematic.
This case can be reproduced with following sequence:
# ip link add address 02:11:22:33:44:55 type veth
# ip li sh
...
26: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \
noop state DOWN mode DEFAULT qlen 1000
link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff
27: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \
noop state DOWN mode DEFAULT qlen 1000
link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff
Second it is not possible to register both main and
peer network devices with same name, that happens
when name for main interface is given with IFLA_IFNAME
and same attribute reused for peer.
This case can be reproduced with following sequence:
# ip link add dev veth1a type veth
RTNETLINK answers: File exists
To fix both of the cases check if corresponding netlink
attributes are taken from peer_tb when valid or
name based on rtnl ops kind and random address is used.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lokesh Vutla [Wed, 21 Jun 2017 08:42:04 +0000 (14:12 +0530)]
drivers: net: cpsw-common: Fix reading of mac address for am43 SoCs
cpsw driver tries to get macid for am43xx SoCs using the compatible
ti,am4372. But not all variants of am43x uses this complatible like
epos evm uses ti,am438x. So use a generic compatible ti,am43 to get
macid for all am43 based platforms.
Reviewed-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Tue, 20 Jun 2017 18:42:27 +0000 (11:42 -0700)]
ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER
In commit
242d3a49a2a1 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf")
I assumed NETDEV_REGISTER and NETDEV_UNREGISTER are paired,
unfortunately, as reported by jeffy, netdev_wait_allrefs()
could rebroadcast NETDEV_UNREGISTER event until all refs are
gone.
We have to add an additional check to avoid this corner case.
For netdev_wait_allrefs() dev->reg_state is NETREG_UNREGISTERED,
for dev_change_net_namespace(), dev->reg_state is
NETREG_REGISTERED. So check for dev->reg_state != NETREG_UNREGISTERED.
Fixes:
242d3a49a2a1 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf")
Reported-by: jeffy <jeffy.chen@rock-chips.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zach Brown [Tue, 20 Jun 2017 17:48:11 +0000 (12:48 -0500)]
net/phy: micrel: configure intterupts after autoneg workaround
The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an
autoneg failure case by resetting the hardware. This turns off
intterupts. Things will work themselves out if the phy polls, as it will
figure out it's state during a poll. However if the phy uses only
intterupts, the phy will stall, since interrupts are off. This patch
fixes the issue by calling config_intr after resetting the phy.
Fixes:
d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg ")
Signed-off-by: Zach Brown <zach.brown@ni.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yossi Kuperman [Thu, 22 Jun 2017 08:37:11 +0000 (11:37 +0300)]
esp6_offload: Fix IP6CB(skb)->nhoff for ESP GRO
IP6CB(skb)->nhoff is the offset of the nexthdr field in an IPv6
header, unless there are extension headers present, in which case
nhoff points to the nexthdr field of the last extension header.
In non-GRO code path, nhoff is set by ipv6_rcv before any XFRM code
is executed. Conversely, in GRO code path (when esp6_offload is loaded),
nhoff is not set. The following functions fail to read the correct value
and eventually the packet is dropped:
xfrm6_transport_finish
xfrm6_tunnel_input
xfrm6_rcv_tnl
Set nhoff to the proper offset of nexthdr in esp6_gro_receive.
Fixes:
7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Yossi Kuperman [Thu, 22 Jun 2017 08:37:10 +0000 (11:37 +0300)]
xfrm6: Fix IPv6 payload_len in xfrm6_transport_finish
IPv6 payload length indicates the size of the payload, including any
extension headers.
In xfrm6_transport_finish, ipv6_hdr(skb)->payload_len is set to the
payload size only, regardless of the presence of any extension headers.
After ESP GRO transport mode decapsulation, ipv6_rcv trims the packet
according to the wrong payload_len, thus corrupting the packet.
Set payload_len to account for extension headers as well.
Fixes:
7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Linus Torvalds [Wed, 21 Jun 2017 19:40:20 +0000 (12:40 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix refcounting wrt timers which hold onto inet6 address objects,
from Xin Long.
2) Fix an ancient bug in wireless wext ioctls, from Johannes Berg.
3) Firmware handling fixes in brcm80211 driver, from Arend Van Spriel.
4) Several mlx5 driver fixes (firmware readiness, timestamp cap
reporting, devlink command validity checking, tc offloading, etc.)
From Eli Cohen, Maor Dickman, Chris Mi, and Or Gerlitz.
5) Fix dst leak in IP/IP6 tunnels, from Haishuang Yan.
6) Fix dst refcount bug in decnet, from Wei Wang.
7) Netdev can be double freed in register_vlan_device(). Fix from Gao
Feng.
8) Don't allow object to be destroyed while it is being dumped in SCTP,
from Xin Long.
9) Fix dpaa_eth build when modular, from Madalin Bucur.
10) Fix throw route leaks, from Serhey Popovych.
11) IFLA_GROUP missing from if_nlmsg_size() and ifla_policy[] table,
also from Serhey Popovych.
12) Fix premature TX SKB free in stmmac, from Niklas Cassel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
igmp: add a missing spin_lock_init()
net: stmmac: free an skb first when there are no longer any descriptors using it
sfc: remove duplicate up_write on VF filter_sem
rtnetlink: add IFLA_GROUP to ifla_policy
ipv6: Do not leak throw route references
dt-bindings: net: sms911x: Add missing optional VDD regulators
dpaa_eth: reuse the dma_ops provided by the FMan MAC device
fsl/fman: propagate dma_ops
net/core: remove explicit do_softirq() from busy_poll_stop()
fib_rules: Resolve goto rules target on delete
sctp: ensure ep is not destroyed before doing the dump
net/hns:bugfix of ethtool -t phy self_test
net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev
cxgb4: notify uP to route ctrlq compl to rdma rspq
ip6_tunnel: Correct tos value in collect_md mode
decnet: always not take dst->__refcnt when inserting dst into hash table
ip6_tunnel: fix potential issue in __ip6_tnl_rcv
ip_tunnel: fix potential issue in ip_tunnel_rcv
brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2()
net/mlx5e: Avoid doing a cleanup call if the profile doesn't have it
...
Linus Torvalds [Wed, 21 Jun 2017 19:16:12 +0000 (12:16 -0700)]
Merge tag 'pinctrl-v4.12-3' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull more pin control fixes from Linus Walleij:
"Some late arriving fixes. I should have sent earlier, just swamped
with work as usual. Thomas patch makes AMD systems usable despite
firmware bugs so it is fairly important.
- Make the AMD driver use a regular interrupt rather than a chained
one, so the system does not lock up.
- Fix a function call error deep inside the STM32 driver"
* tag 'pinctrl-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stm32: Fix bad function call
pinctrl/amd: Use regular interrupt instead of chained
Linus Torvalds [Wed, 21 Jun 2017 19:06:29 +0000 (12:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- revert of a commit to magicmouse driver that regressess certain
devices, from Daniel Stone
- quirk for a specific Dell mouse, from Sebastian Parschauer
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
Revert "HID: magicmouse: Set multi-touch keybits for Magic Mouse"
HID: Add quirk for Dell PIXART OEM mouse
Linus Torvalds [Wed, 21 Jun 2017 19:02:48 +0000 (12:02 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/livepatching
Pull livepatching fix from Jiri Kosina:
"Fix the way how livepatches are being stacked with respect to RCU,
from Petr Mladek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Fix stacking of patches with respect to RCU
Linus Torvalds [Wed, 21 Jun 2017 18:30:52 +0000 (11:30 -0700)]
Merge branch 'ufs-fixes' of git://git./linux/kernel/git/viro/vfs
Pull more ufs fixes from Al Viro:
"More UFS fixes, unfortunately including build regression fix for the
64-bit s_dsize commit. Fixed in this pile:
- trivial bug in signedness of 32bit timestamps on ufs1
- ESTALE instead of ufs_error() when doing open-by-fhandle on
something deleted
- build regression on 32bit in ufs_new_fragments() - calculating that
many percents of u64 pulls libgcc stuff on some of those. Mea
culpa.
- fix hysteresis loop broken by typo in 2.4.14.7 (right next to the
location of previous bug).
- fix the insane limits of said hysteresis loop on filesystems with
very low percentage of reserved blocks. If it's 5% or less, just
use the OPTSPACE policy.
- calculate those limits once and mount time.
This tree does pass xfstests clean (both ufs1 and ufs2) and it _does_
survive cross-builds.
Again, my apologies for missing that, especially since I have noticed
a related percentage-of-64bit issue in earlier patches (when dealing
with amount of reserved blocks). Self-LART applied..."
* 'ufs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs: fix the logics for tail relocation
ufs_iget(): fail with -ESTALE on deleted inode
fix signedness of timestamps on ufs1
Helge Deller [Mon, 19 Jun 2017 15:34:05 +0000 (17:34 +0200)]
Allow stack to grow up to address space limit
Fix expand_upwards() on architectures with an upward-growing stack (parisc,
metag and partly IA-64) to allow the stack to reliably grow exactly up to
the address space limit given by TASK_SIZE.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Tue, 20 Jun 2017 09:10:44 +0000 (02:10 -0700)]
mm: fix new crash in unmapped_area_topdown()
Trinity gets kernel BUG at mm/mmap.c:1963! in about 3 minutes of
mmap testing. That's the VM_BUG_ON(gap_end < gap_start) at the
end of unmapped_area_topdown(). Linus points out how MAP_FIXED
(which does not have to respect our stack guard gap intentions)
could result in gap_end below gap_start there. Fix that, and
the similar case in its alternative, unmapped_area().
Cc: stable@vger.kernel.org
Fixes:
1be7107fbe18 ("mm: larger stack guard gap, between vmas")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Debugged-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WANG Cong [Tue, 20 Jun 2017 17:46:27 +0000 (10:46 -0700)]
igmp: add a missing spin_lock_init()
Andrey reported a lockdep warning on non-initialized
spinlock:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 4099 Comm: a.out Not tainted 4.12.0-rc6+ #9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16
dump_stack+0x292/0x395 lib/dump_stack.c:52
register_lock_class+0x717/0x1aa0 kernel/locking/lockdep.c:755
? 0xffffffffa0000000
__lock_acquire+0x269/0x3690 kernel/locking/lockdep.c:3255
lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855
__raw_spin_lock_bh ./include/linux/spinlock_api_smp.h:135
_raw_spin_lock_bh+0x36/0x50 kernel/locking/spinlock.c:175
spin_lock_bh ./include/linux/spinlock.h:304
ip_mc_clear_src+0x27/0x1e0 net/ipv4/igmp.c:2076
igmpv3_clear_delrec+0xee/0x4f0 net/ipv4/igmp.c:1194
ip_mc_destroy_dev+0x4e/0x190 net/ipv4/igmp.c:1736
We miss a spin_lock_init() in igmpv3_add_delrec(), probably
because previously we never use it on this code path. Since
we already unlink it from the global mc_tomb list, it is
probably safe not to acquire this spinlock here. It does not
harm to have it although, to avoid conditional locking.
Fixes:
c38b7d327aaf ("igmp: acquire pmc lock for ip_mc_clear_src()")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 20 Jun 2017 19:41:56 +0000 (15:41 -0400)]
Merge tag 'wireless-drivers-for-davem-2017-06-20' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.12
Two important fixes for brcmfmac. The rest of the brcmfmac patches are
either code preparation and fixing a new build warning.
brcmfmac
* fix a NULL pointer dereference during resume
* fix a NULL pointer dereference with USB devices, a regression from
v4.12-rc1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Niklas Cassel [Tue, 20 Jun 2017 12:32:41 +0000 (14:32 +0200)]
net: stmmac: free an skb first when there are no longer any descriptors using it
When having the skb pointer in the first descriptor, stmmac_tx_clean
can get called at a moment where the IP has only cleared the own bit
of the first descriptor, thus freeing the skb, even though there can
be several descriptors whose buffers point into the same skb.
By simply moving the skb pointer from the first descriptor to the last
descriptor, a skb will get freed only when the IP has cleared the
own bit of all the descriptors that are using that skb.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree [Tue, 20 Jun 2017 12:08:51 +0000 (13:08 +0100)]
sfc: remove duplicate up_write on VF filter_sem
Somehow two copies of the line 'up_write(&vf->efx->filter_sem);' got into
efx_ef10_sriov_set_vf_vlan(). This would put the mutex in a bad state and
cause all subsequent down attempts to hang.
Fixes:
671b53eec2ed ("sfc: Ensure down_write(&filter_sem) and up_write() are matched before calling efx_net_open()")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Serhey Popovych [Tue, 20 Jun 2017 11:35:23 +0000 (14:35 +0300)]
rtnetlink: add IFLA_GROUP to ifla_policy
Network interface groups support added while ago, however
there is no IFLA_GROUP attribute description in policy
and netlink message size calculations until now.
Add IFLA_GROUP attribute to the policy.
Fixes:
cbda10fa97d7 ("net_device: add support for network device groups")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Serhey Popovych [Tue, 20 Jun 2017 10:29:25 +0000 (13:29 +0300)]
ipv6: Do not leak throw route references
While commit
73ba57bfae4a ("ipv6: fix backtracking for throw routes")
does good job on error propagation to the fib_rules_lookup()
in fib rules core framework that also corrects throw routes
handling, it does not solve route reference leakage problem
happened when we return -EAGAIN to the fib_rules_lookup()
and leave routing table entry referenced in arg->result.
If rule with matched throw route isn't last matched in the
list we overwrite arg->result losing reference on throw
route stored previously forever.
We also partially revert commit
ab997ad40839 ("ipv6: fix the
incorrect return value of throw route") since we never return
routing table entry with dst.error == -EAGAIN when
CONFIG_IPV6_MULTIPLE_TABLES is on. Also there is no point
to check for RTF_REJECT flag since it is always set throw
route.
Fixes:
73ba57bfae4a ("ipv6: fix backtracking for throw routes")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof Kozlowski [Mon, 19 Jun 2017 16:05:41 +0000 (18:05 +0200)]
dt-bindings: net: sms911x: Add missing optional VDD regulators
The lan911x family of devices require supplying from 3.3 V power
supplies (connected to VDD_IO, VDD_A and VREG_3.3 pins). The existing
driver however obtains only VDD_IO and VDD_A regulators in an optional
way so document this in bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 20 Jun 2017 17:46:54 +0000 (13:46 -0400)]
Merge branch 'net-fix-loadable-module-for-DPAA-Ethernet'
Madalin Bucur says:
====================
net: fix loadable module for DPAA Ethernet
The DPAA Ethernet makes use of a symbol that is not exported.
Address the issue by propagating the dma_ops rather than calling
arch_setup_dma_ops().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Mon, 19 Jun 2017 15:04:17 +0000 (18:04 +0300)]
dpaa_eth: reuse the dma_ops provided by the FMan MAC device
Remove the use of arch_setup_dma_ops() that was not exported
and was breaking loadable module compilation.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Mon, 19 Jun 2017 15:04:16 +0000 (18:04 +0300)]
fsl/fman: propagate dma_ops
Make sure dma_ops are set, to be later used by the Ethernet driver.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Siewior [Fri, 16 Jun 2017 17:24:00 +0000 (19:24 +0200)]
net/core: remove explicit do_softirq() from busy_poll_stop()
Since commit
217f69743681 ("net: busy-poll: allow preemption in
sk_busy_loop()") there is an explicit do_softirq() invocation after
local_bh_enable() has been invoked.
I don't understand why we need this because local_bh_enable() will
invoke do_softirq() once the softirq counter reached zero and we have
softirq-related work pending.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Serhey Popovych [Fri, 16 Jun 2017 12:44:47 +0000 (15:44 +0300)]
fib_rules: Resolve goto rules target on delete
We should avoid marking goto rules unresolved when their
target is actually reachable after rule deletion.
Consolder following sample scenario:
# ip -4 ru sh
0: from all lookup local
32000: from all goto 32100
32100: from all lookup main
32100: from all lookup default
32766: from all lookup main
32767: from all lookup default
# ip -4 ru del pref 32100 table main
# ip -4 ru sh
0: from all lookup local
32000: from all goto 32100 [unresolved]
32100: from all lookup default
32766: from all lookup main
32767: from all lookup default
After removal of first rule with preference 32100 we
mark all goto rules as unreachable, even when rule with
same preference as removed one still present.
Check if next rule with same preference is available
and make all rules with goto action pointing to it.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Kosina [Tue, 20 Jun 2017 08:52:46 +0000 (10:52 +0200)]
Merge branch 'for-4.12/upstream-fixes' into for-linus
Petr Mladek [Wed, 14 Jun 2017 08:54:52 +0000 (10:54 +0200)]
livepatch: Fix stacking of patches with respect to RCU
rcu_read_(un)lock(), list_*_rcu(), and synchronize_rcu() are used for a secure
access and manipulation of the list of patches that modify the same function.
In particular, it is the variable func_stack that is accessible from the ftrace
handler via struct ftrace_ops and klp_ops.
Of course, it synchronizes also some states of the patch on the top of the
stack, e.g. func->transition in klp_ftrace_handler.
At the same time, this mechanism guards also the manipulation of
task->patch_state. It is modified according to the state of the transition and
the state of the process.
Now, all this works well as long as RCU works well. Sadly livepatching might
get into some corner cases when this is not true. For example, RCU is not
watching when rcu_read_lock() is taken in idle threads. It is because they
might sleep and prevent reaching the grace period for too long.
There are ways how to make RCU watching even in idle threads, see
rcu_irq_enter(). But there is a small location inside RCU infrastructure when
even this does not work.
This small problematic location can be detected either before calling
rcu_irq_enter() by rcu_irq_enter_disabled() or later by rcu_is_watching().
Sadly, there is no safe way how to handle it. Once we detect that RCU was not
watching, we might see inconsistent state of the function stack and the related
variables in klp_ftrace_handler(). Then we could do a wrong decision, use an
incompatible implementation of the function and break the consistency of the
system. We could warn but we could not avoid the damage.
Fortunately, ftrace has similar problems and they seem to be solved well there.
It uses a heavy weight implementation of some RCU operations. In particular, it
replaces:
+ rcu_read_lock() with preempt_disable_notrace()
+ rcu_read_unlock() with preempt_enable_notrace()
+ synchronize_rcu() with schedule_on_each_cpu(sync_work)
My understanding is that this is RCU implementation from a stone age. It meets
the core RCU requirements but it is rather ineffective. Especially, it does not
allow to batch or speed up the synchronize calls.
On the other hand, it is very trivial. It allows to safely trace and/or
livepatch even the RCU core infrastructure. And the effectiveness is a not a
big issue because using ftrace or livepatches on productive systems is a rare
operation. The safety is much more important than a negligible extra load.
Note that the alternative implementation follows the RCU principles. Therefore,
we could and actually must use list_*_rcu() variants when manipulating the
func_stack. These functions allow to access the pointers in the right
order and with the right barriers. But they do not use any other
information that would be set only by rcu_read_lock().
Also note that there are actually two problems solved in ftrace:
First, it cares about the consistency of RCU read sections. It is being solved
the way as described and used in this patch.
Second, ftrace needs to make sure that nobody is inside the dynamic trampoline
when it is being freed. For this, it also calls synchronize_rcu_tasks() in
preemptive kernel in ftrace_shutdown().
Livepatch has similar problem but it is solved by ftrace for free.
klp_ftrace_handler() is a good guy and never sleeps. In addition, it is
registered with FTRACE_OPS_FL_DYNAMIC. It causes that
unregister_ftrace_function() calls:
* schedule_on_each_cpu(ftrace_sync) - always
* synchronize_rcu_tasks() - in preemptive kernel
The effect is that nobody is neither inside the dynamic trampoline nor inside
the ftrace handler after unregister_ftrace_function() returns.
[jkosina@suse.cz: reformat changelog, fix comment]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Daniel Stone [Thu, 15 Jun 2017 12:35:50 +0000 (13:35 +0100)]
Revert "HID: magicmouse: Set multi-touch keybits for Magic Mouse"
Setting these bits causes libinput to fail to initialize the device;
setting BTN_TOUCH and BTN_TOOL_FINGER causes it to treat the mouse as a
touchpad, and it then refuses to continue when it discovers ABS_X is not
set.
This breaks all known Wayland compositors, as well as Xorg when the
libinput driver is being used.
This reverts commit
f4b65b9563216b3e01a5cc844c3ba68901d9b195.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Che-Liang Chiou <clchiou@chromium.org>
Cc: Thierry Escande <thierry.escande@collabora.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds [Tue, 20 Jun 2017 03:02:29 +0000 (11:02 +0800)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"One build fix for an Amlogic clk driver and a handful of Allwinner clk
driver fixes for some DT bindings and a randconfig build error that
all came in this merge window"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM
clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM
dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks
clk: sunxi-ng: sun5i: Fix ahb_bist_clk definition
clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM
clk: meson: gxbb: fix build error without RESET_CONTROLLER
clk: sunxi-ng: v3s: Fix usb otg device reset bit
clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset
Linus Torvalds [Tue, 20 Jun 2017 02:57:06 +0000 (10:57 +0800)]
Merge tag 'ntb-4.12-bugfixes' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason:
"NTB bug fixes to address the modinfo in ntb_perf, a couple of bugs in
the NTB transport QP calculations, skx doorbells, and sleeping in
ntb_async_tx_submit"
* tag 'ntb-4.12-bugfixes' of git://github.com/jonmason/ntb:
ntb: no sleep in ntb_async_tx_submit
ntb: ntb_hw_intel: Skylake doorbells should be 32bits, not 64bits
ntb_transport: fix bug calculating num_qps_mw
ntb_transport: fix qp count bug
NTB: ntb_test: fix bug printing ntb_perf results
ntb: Correct modinfo usage statement for ntb_perf
Xin Long [Sat, 17 Jun 2017 08:10:27 +0000 (16:10 +0800)]
sctp: ensure ep is not destroyed before doing the dump
Now before dumping a sock in sctp_diag, it only holds the sock while
the ep may be already destroyed. It can cause a use-after-free panic
when accessing ep->asocs.
This patch is to set sctp_sk(sk)->ep NULL in sctp_endpoint_destroy,
and check if this ep is already destroyed before dumping this ep.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdrver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allen Hubbe [Fri, 9 Jun 2017 22:06:36 +0000 (18:06 -0400)]
ntb: no sleep in ntb_async_tx_submit
Do not sleep in ntb_async_tx_submit, which could deadlock.
This reverts commit "
8c874cc140d667f84ae4642bb5b5e0d6396d2ca4"
Fixes:
8c874cc140d6 ("NTB: Address out of DMA descriptor issue with NTB")
Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Dave Jiang [Thu, 8 Jun 2017 19:46:45 +0000 (12:46 -0700)]
ntb: ntb_hw_intel: Skylake doorbells should be 32bits, not 64bits
Fixing doorbell register length to 32bits per spec. On Skylake NTB, the
doorbell registers are 32bit write only registers. The source for the
doorbell is a 64bit register that shows the interrupt bits.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes:
783dfa6cc41b ("ntb: Adding Skylake Xeon NTB support")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Logan Gunthorpe [Mon, 5 Jun 2017 20:00:53 +0000 (14:00 -0600)]
ntb_transport: fix bug calculating num_qps_mw
A divide by zero error occurs if qp_count is less than mw_count because
num_qps_mw is calculated to be zero. The calculation appears to be
incorrect.
The requirement is for num_qps_mw to be set to qp_count / mw_count
with any remainder divided among the earlier mws.
For example, if mw_count is 5 and qp_count is 12 then mws 0 and 1
will have 3 qps per window and mws 2 through 4 will have 2 qps per window.
Thus, when mw_num < qp_count % mw_count, num_qps_mw is 1 higher
than when mw_num >= qp_count.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes:
e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Logan Gunthorpe [Mon, 5 Jun 2017 20:00:52 +0000 (14:00 -0600)]
ntb_transport: fix qp count bug
In cases where there are more mw's than spads/2-2, the mw count gets
reduced to match the limitation. ntb_transport also tries to ensure that
there are fewer qps than mws but uses the full mw count instead of
the reduced one. When this happens, the math in
'ntb_transport_setup_qp_mw' will get confused and result in a kernel
paging request bug.
This patch fixes the bug by reducing qp_count to the reduced mw count
instead of the full mw count.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes:
e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Logan Gunthorpe [Mon, 5 Jun 2017 16:13:24 +0000 (10:13 -0600)]
NTB: ntb_test: fix bug printing ntb_perf results
The code mistakenly prints the local perf results for the remote test
so the script reports identical results for both directions. Fix this
by ensuring we print the remote result.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes:
a9c59ef77458 ("ntb_test: Add a selftest script for the NTB subsystem")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Gary R Hook [Thu, 4 May 2017 16:36:52 +0000 (11:36 -0500)]
ntb: Correct modinfo usage statement for ntb_perf
The order parameters are powers of 2; adjust the usage information
to use correct mathematical representations.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Fixes:
8a7b6a778a85 ("ntb: ntb perf tool")
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Lin Yun Sheng [Fri, 16 Jun 2017 09:24:51 +0000 (17:24 +0800)]
net/hns:bugfix of ethtool -t phy self_test
This patch fixes the phy loopback self_test failed issue. when
Marvell Phy Module is loaded, it will powerdown fiber when doing
phy loopback self test, which cause phy loopback self_test fail.
Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gao Feng [Fri, 16 Jun 2017 07:00:02 +0000 (15:00 +0800)]
net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev
The register_vlan_device would invoke free_netdev directly, when
register_vlan_dev failed. It would trigger the BUG_ON in free_netdev
if the dev was already registered. In this case, the netdev would be
freed in netdev_run_todo later.
So add one condition check now. Only when dev is not registered, then
free it directly.
The following is the part coredump when netdev_upper_dev_link failed
in register_vlan_dev. I removed the lines which are too long.
[ 411.237457] ------------[ cut here ]------------
[ 411.237458] kernel BUG at net/core/dev.c:7998!
[ 411.237484] invalid opcode: 0000 [#1] SMP
[ 411.237705] [last unloaded: 8021q]
[ 411.237718] CPU: 1 PID: 12845 Comm: vconfig Tainted: G E 4.12.0-rc5+ #6
[ 411.237737] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
[ 411.237764] task:
ffff9cbeb6685580 task.stack:
ffffa7d2807d8000
[ 411.237782] RIP: 0010:free_netdev+0x116/0x120
[ 411.237794] RSP: 0018:
ffffa7d2807dbdb0 EFLAGS:
00010297
[ 411.237808] RAX:
0000000000000002 RBX:
ffff9cbeb6ba8fd8 RCX:
0000000000001878
[ 411.237826] RDX:
0000000000000001 RSI:
0000000000000282 RDI:
0000000000000000
[ 411.237844] RBP:
ffffa7d2807dbdc8 R08:
0002986100029841 R09:
0002982100029801
[ 411.237861] R10:
0004000100029980 R11:
0004000100029980 R12:
ffff9cbeb6ba9000
[ 411.238761] R13:
ffff9cbeb6ba9060 R14:
ffff9cbe60f1a000 R15:
ffff9cbeb6ba9000
[ 411.239518] FS:
00007fb690d81700(0000) GS:
ffff9cbebb640000(0000) knlGS:
0000000000000000
[ 411.239949] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 411.240454] CR2:
00007f7115624000 CR3:
0000000077cdf000 CR4:
00000000003406e0
[ 411.240936] Call Trace:
[ 411.241462] vlan_ioctl_handler+0x3f1/0x400 [8021q]
[ 411.241910] sock_ioctl+0x18b/0x2c0
[ 411.242394] do_vfs_ioctl+0xa1/0x5d0
[ 411.242853] ? sock_alloc_file+0xa6/0x130
[ 411.243465] SyS_ioctl+0x79/0x90
[ 411.243900] entry_SYSCALL_64_fastpath+0x1e/0xa9
[ 411.244425] RIP: 0033:0x7fb69089a357
[ 411.244863] RSP: 002b:
00007ffcd04e0fc8 EFLAGS:
00000202 ORIG_RAX:
0000000000000010
[ 411.245445] RAX:
ffffffffffffffda RBX:
00007ffcd04e2884 RCX:
00007fb69089a357
[ 411.245903] RDX:
00007ffcd04e0fd0 RSI:
0000000000008983 RDI:
0000000000000003
[ 411.246527] RBP:
00007ffcd04e0fd0 R08:
0000000000000000 R09:
1999999999999999
[ 411.246976] R10:
000000000000053f R11:
0000000000000202 R12:
0000000000000004
[ 411.247414] R13:
00007ffcd04e1128 R14:
00007ffcd04e2888 R15:
0000000000000001
[ 411.249129] RIP: free_netdev+0x116/0x120 RSP:
ffffa7d2807dbdb0
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Rangoju [Mon, 19 Jun 2017 14:16:00 +0000 (19:46 +0530)]
cxgb4: notify uP to route ctrlq compl to rdma rspq
During the module initialisation there is a possible race
(basically race between uld and lld) where neither the uld
nor lld notifies the uP about where to route the ctrl queue
completions. LLD skips notifying uP as the rdma queues were
not created by then (will leave it to ULD to notify the uP).
As the ULD comes up, it also skips notifying the uP as the
flag FULL_INIT_DONE is not set yet (ULD assumes that the
interface is not up yet).
Consequently, this race between uld and lld leaves uP
unnotified about where to send the ctrl queue completions
to, leading to iwarp RI_RES WR failure.
Here is the race:
CPU 0 CPU1
- allocates nic rx queus
- t4_sge_alloc_ctrl_txq()
(if rdma rsp queues exists,
tell uP to route ctrl queue
compl to rdma rspq)
- acquires the mutex_lock
- allocates rdma response queues
- if FULL_INIT_DONE set,
tell uP to route ctrl queue compl
to rdma rspq
- relinquishes mutex_lock
- acquires the mutex_lock
- enable_rx()
- set FULL_INIT_DONE
- relinquishes mutex_lock
This patch fixes the above issue.
Fixes:
e7519f9926f1('cxgb4: avoid enabling napi twice to the same queue')
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
CC: Stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 19 Jun 2017 14:19:37 +0000 (22:19 +0800)]
Linux 4.12-rc6
Hugh Dickins [Mon, 19 Jun 2017 11:03:24 +0000 (04:03 -0700)]
mm: larger stack guard gap, between vmas
Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.
This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.
Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.
One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications. For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).
Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.
Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.
Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 19 Jun 2017 08:50:09 +0000 (16:50 +0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Stream of fixes has slowed down, only a few this week:
- Some DT fixes for Allwinner platforms, and addition of a clock to
the R_CCU clock controller that had been missed.
- A couple of small DT fixes for am335x-sl50"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
ARM: dts: am335x-sl50: Fix card detect pin for mmc1
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
David S. Miller [Mon, 19 Jun 2017 04:03:51 +0000 (00:03 -0400)]
Merge tag 'mac80211-for-davem-2017-06-16' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Here's just the fix for that ancient bug:
* remove wext calling ndo_do_ioctl, since nobody needs
that now and it makes the type change easier
* use struct iwreq instead of struct ifreq almost everywhere
in wireless extensions code
* copy only struct iwreq from userspace in dev_ioctl for the
wireless extensions, since it's smaller than struct ifreq
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Haishuang Yan [Sat, 17 Jun 2017 03:38:05 +0000 (11:38 +0800)]
ip6_tunnel: Correct tos value in collect_md mode
Same as ip_gre, geneve and vxlan, use key->tos as traffic class value.
CC: Peter Dawson <petedaws@gmail.com>
Fixes:
0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on
encapsulated packets”)
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: Peter Dawson <peter.a.dawson@boeing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Olof Johansson [Mon, 19 Jun 2017 03:42:21 +0000 (20:42 -0700)]
Merge tag 'sunxi-fixes-for-4.12' of https://git./linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.12
A few fixes around the PRCM support that got in 4.12 with a wrong
compatible, and a missing clock in the binding.
* tag 'sunxi-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
arm64: allwinner: h5: Remove syslink to shared DTSI
ARM: sunxi: h3/h5: fix the compatible of R_CCU
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Mon, 19 Jun 2017 01:55:12 +0000 (18:55 -0700)]
Merge tag 'omap-for-v4.12/fixes-sl50' of git://git./linux/kernel/git/tmlind/linux-omap into fixes
Two fixes for am335x-sl50 to fix a boot time error
for claiming SPI pins, and to fix a SDIO card detect
pin for production version of the device.
* tag 'omap-for-v4.12/fixes-sl50' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
ARM: dts: am335x-sl50: Fix card detect pin for mmc1
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Mon, 19 Jun 2017 00:25:05 +0000 (09:25 +0900)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio bugfix from Michael Tsirkin:
"It turns out balloon does not handle IOMMUs correctly. We should fix
that at some point, for now let's just disable this configuration"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: disable VIOMMU support
Linus Torvalds [Mon, 19 Jun 2017 00:20:25 +0000 (09:20 +0900)]
Merge branch 'i2c/for-current-fixed' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two driver bugfixes"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: ismt: fix wrong device address when unmap the data buffer
i2c: rcar: use correct length when unmapping DMA
Linus Torvalds [Mon, 19 Jun 2017 00:01:01 +0000 (09:01 +0900)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
- Three highmem fixes:
+ Fixed mapping initialization
+ Adjust the pkmap location
+ Ensure we use at most one page for PTEs
- Fix makefile dependencies for .its targets to depend on vmlinux
- Fix reversed condition in BNEZC and JIALC software branch emulation
- Only flush initialized flush_insn_slot to avoid NULL pointer
dereference
- perf: Remove incorrect odd/even counter handling for I6400
- ftrace: Fix init functions tracing
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: .its targets depend on vmlinux
MIPS: Fix bnezc/jialc return address calculation
MIPS: kprobes: flush_insn_slot should flush only if probe initialised
MIPS: ftrace: fix init functions tracing
MIPS: mm: adjust PKMAP location
MIPS: highmem: ensure that we don't use more than one page for PTEs
MIPS: mm: fixed mappings: correct initialisation
MIPS: perf: Remove incorrect odd/even counter handling for I6400
Michael S. Tsirkin [Tue, 13 Jun 2017 17:56:44 +0000 (20:56 +0300)]
virtio_balloon: disable VIOMMU support
virtio balloon bypasses the DMA API entirely so does not support the
VIOMMU right now. It's not clear we need that support, for now let's
just make sure we don't pretend to support it.
Cc: stable@vger.kernel.org
Cc: Wei Wang <wei.w.wang@intel.com>
Fixes:
1a937693993f ("virtio: new feature to detect IOMMU device quirk")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Linus Torvalds [Sun, 18 Jun 2017 09:49:12 +0000 (18:49 +0900)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixlets for x86:
- Handle WARN_ONs proper with the new UD based WARN implementation
- Disable 1G mappings when 2M mappings are disabled by kmemleak or
debug_pagealloc. Otherwise 1G mappings might still be used,
confusing the debug mechanisms"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Disable 1GB direct mappings when disabling 2MB mappings
x86/debug: Handle early WARN_ONs proper
Linus Torvalds [Sun, 18 Jun 2017 09:46:51 +0000 (18:46 +0900)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Three fixlets for timers:
- Two hot-fixes for the alarmtimer based posix timers, which prevent
a nasty DOS by self rescheduling timers. The proper cleanup of that
mess is queued for 4.13
- Make a function static"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Make tick_broadcast_setup_oneshot() static
alarmtimer: Rate limit periodic intervals
alarmtimer: Prevent overflow of relative timers
Linus Torvalds [Sun, 18 Jun 2017 09:45:17 +0000 (18:45 +0900)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two small fixes for the schedulre core:
- Use the proper switch_mm() variant in idle_task_exit() because that
code is not called with interrupts disabled.
- Fix a confusing typo in a printk"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()
sched/fair: Fix typo in printk message
Linus Torvalds [Sun, 18 Jun 2017 09:42:31 +0000 (18:42 +0900)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Three fixes for the perf user space side:
- Fix the probing of precise_ip level, which got broken recently for
x86.
- Unbreak the ARCH=x86_64 build
- Report module before trying to unwind into the module code, which
avoids broken stack frames displayed"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf unwind: Report module before querying isactivation in dwfl unwind
perf tools: Fix build with ARCH=x86_64
perf evsel: Fix probing of precise_ip level for default cycles event
Linus Torvalds [Sun, 18 Jun 2017 09:40:41 +0000 (18:40 +0900)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"Add a missing resource release to an error path"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Release resources in __setup_irq() error path
Linus Torvalds [Sun, 18 Jun 2017 09:38:42 +0000 (18:38 +0900)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single fix which adds fortify_panic to the list of no return
functions"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add fortify_panic as __noreturn function
Linus Torvalds [Sat, 17 Jun 2017 23:51:35 +0000 (08:51 +0900)]
Merge tag 'led_fixes_for_4.12-rc6' of git://git./linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
"Two LED fixes:
- fix signal source assignment for leds-bcm6328
- revert patch that intended to fix LED behavior on suspend but it
had a side effect preventing suspend at all due to uevent being
sent on trigger removal"
* tag 'led_fixes_for_4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
Revert "leds: handle suspend/resume in heartbeat trigger"
leds: bcm6328: fix signal source assignment for leds 4 to 7
Linus Torvalds [Sat, 17 Jun 2017 23:39:54 +0000 (08:39 +0900)]
Merge tag 'usb-4.12-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small gadget and xhci USB fixes for 4.12-rc6.
Nothing major, but one of the gadget patches does fix a reported oops,
and the xhci ones resolve reported problems. All have been in
linux-next with no reported issues"
* tag 'usb-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks
usb: xhci: ASMedia ASM1042A chipset need shorts TX quirk
usb: xhci: Fix USB 3.1 supported protocol parsing
USB: gadget: fix GPF in gadgetfs
usb: gadget: composite: make sure to reactivate function on unbind
Linus Torvalds [Sat, 17 Jun 2017 23:36:30 +0000 (08:36 +0900)]
Merge tag 'staging-4.12-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull staging and IIO fixes from Greg KH:
"Here are some small staging and IIO driver fixes for 4.12-rc6.
Nothing huge, just a few small driver fixes for reported issues. All
have been in linux-next with no reported issues"
* tag 'staging-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Staging: rtl8723bs: fix an error code in isFileReadable()
iio: buffer-dmaengine: Add missing header buffer_impl.h
iio: buffer-dma: Add missing header buffer_impl.h
iio: adc: meson-saradc: fix potential crash in meson_sar_adc_clear_fifo
iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
iio: imu: inv_mpu6050: add accel lpf setting for chip >= MPU6500
staging: iio: ad7152: Fix deadlock in ad7152_write_raw_samp_freq()
Linus Torvalds [Sat, 17 Jun 2017 23:23:02 +0000 (08:23 +0900)]
Merge tag 'ceph-for-4.12-rc6' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for an old ceph ->fh_to_* bug from Luis and two timestamp fixups
from Zheng, prompted by the ongoing y2038 work"
* tag 'ceph-for-4.12-rc6' of git://github.com/ceph/ceph-client:
ceph: unify inode i_ctime update
ceph: use current_kernel_time() to get request time stamp
ceph: check i_nlink while converting a file handle to dentry
Al Viro [Sat, 17 Jun 2017 19:44:06 +0000 (15:44 -0400)]
ufs: fix the logics for tail relocation
* original hysteresis loop got broken by typo back in 2002; now
it never switches out of OPTTIME state. Fixed.
* critical levels for switching from OPTTIME to OPTSPACE and back
ought to be calculated once, at mount time.
* we should use mul_u64_u32_div() for those calculations, now that
->s_dsize is 64bit.
* to quote Kirk McKusick (in 1995 FreeBSD commit message):
The threshold for switching from time-space and space-time is too small
when minfree is 5%...so make it stay at space in this case.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sat, 17 Jun 2017 03:54:47 +0000 (23:54 -0400)]
ufs_iget(): fail with -ESTALE on deleted inode
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sat, 17 Jun 2017 03:49:17 +0000 (23:49 -0400)]
fix signedness of timestamps on ufs1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sat, 17 Jun 2017 08:34:41 +0000 (17:34 +0900)]
Merge tag 'xfs-4.12-fixes-4' of git://git./fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"One more bugfix for you for 4.12-rc6 to fix something that came up in
an earlier rc:
- Fix some bogus ASSERT failures on CONFIG_SMP=n and CONFIG_XFS_DEBUG=y"
* tag 'xfs-4.12-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix spurious spin_is_locked() assert failures on non-smp kernels
Linus Torvalds [Sat, 17 Jun 2017 08:30:07 +0000 (17:30 +0900)]
Merge branch 'ufs-fixes' of git://git./linux/kernel/git/viro/vfs
Pull ufs fixes from Al Viro:
"Fix assorted ufs bugs: a couple of deadlocks, fs corruption in
truncate(), oopsen on tail unpacking and truncate when racing with
vmscan, mild fs corruption (free blocks stats summary buggered, *BSD
fsck would complain and fix), several instances of broken logics
around reserved blocks (starting with "check almost never triggers
when it should" and then there are issues with sufficiently large
UFS2)"
[ Note: ufs hasn't gotten any loving in a long time, because nobody
really seems to use it. These ufs fixes are triggered by people
actually caring now, not some sudden influx of new bugs. - Linus ]
* 'ufs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs_truncate_blocks(): fix the case when size is in the last direct block
ufs: more deadlock prevention on tail unpacking
ufs: avoid grabbing ->truncate_mutex if possible
ufs_get_locked_page(): make sure we have buffer_heads
ufs: fix s_size/s_dsize users
ufs: fix reserved blocks check
ufs: make ufs_freespace() return signed
ufs: fix logics in "ufs: make fsck -f happy"