anv/block_pool: Ensure allocations have contiguous maps

Because softpin block pools are made up of a set of BOs with different
maps, it was possible for a single state to end up straddling blocks.
To fix this, we pass a contiguous size to anv_block_pool_grow and it
ensures that the next allocation in the pool will have at least that
size.

We also add an assert in anv_block_pool_map to ensure we always get
contiguous maps.  Prior to the changes to anv_block_pool_grow, the unit
tests failed with this assert.  With this patch, the tests pass.

This was causing problems on Gen12 where we allocate the pages for the
AUX table from the dynamic state pool.  The first chunk, which gets
allocated very early in the pool's history, is 1MB which was enough that
it was getting multiple BOs.  This caused the gen_aux_map code to write
outside of the map and overwrite the instruction state pool buffer which
lead to GPU hangs.

Fixes: 731c4adcf9b "anv/allocator: Add support for non-userptr"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Re-use one old BT block in reset_batch_bo_chain

We intentionally throw away all but one BT block but then we set
cmd_buffer->bt_block to ANV_STATE_NULL instead of the one we hung on to.
This causes the command buffer to immediately re-emit STATE_BASE_ADDRESS
the first time a BT is needed for no good reason.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Set actual state pool sizes when we have softpin

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

nir/algebraic: add some half packing optimizations

pipeline-db (ACO):
Totals from affected shaders:
SGPRS: 29200 -> 29200 (0.00 %)
VGPRS: 17372 -> 17372 (0.00 %)
Spilled SGPRs: 105 -> 105 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 1406576 -> 1389256 (-1.23 %) bytes
LDS: 83 -> 83 (0.00 %) blocks
Max Waves: 3976 -> 3976 (0.00 %)

pipeline-db (LLVM):
Totals from affected shaders:
SGPRS: 21320 -> 21320 (0.00 %)
VGPRS: 17056 -> 17036 (-0.12 %)
Spilled SGPRs: 22 -> 22 (0.00 %)
Spilled VGPRs: 503 -> 487 (-3.18 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 396 -> 396 (0.00 %) dwords per thread
Code Size: 1441244 -> 1423292 (-1.25 %) bytes
LDS: 463 -> 463 (0.00 %) blocks
Max Waves: 3609 -> 3611 (0.06 %)

v2: add pattern for ishr

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2271>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2271>

nir/algebraic: add patterns for a >> #b << #b

Fixes compilation of a Battlefront 2 shader with ACO by removing VGPR
spilling. The reassociation makes it worse on LLVM though.

pipeline-db (ACO):
Totals from affected shaders:
SGPRS: 10704 -> 10688 (-0.15 %)
VGPRS: 18736 -> 18528 (-1.11 %)
Spilled SGPRs: 70 -> 70 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 909696 -> 885796 (-2.63 %) bytes
LDS: 225 -> 225 (0.00 %) blocks
Max Waves: 1115 -> 1129 (1.26 %)

pipeline-db (LLVM):
Totals from affected shaders:
SGPRS: 8472 -> 8424 (-0.57 %)
VGPRS: 14284 -> 14368 (0.59 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 442 -> 503 (13.80 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 268 -> 396 (47.76 %) dwords per thread
Code Size: 862568 -> 853028 (-1.11 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 971 -> 964 (-0.72 %)

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2271>

aco: fix VS input loads with MUBUF on GFX6

Only MTBUF supports vec3.

Fixes: 03a0d39366d ("aco: use MUBUF in some situations instead of splitting vertex fetches")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3615>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3615>

aco: run p_wqm instructions in WQM

If the p_wqm ends up creating copies, these need to be in WQM. Helps (but
doesn't completely fix) artifacts in Strange Brigade. The actual issue
still exists and is harder to fix.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 93c8ebfa780 ('aco: Initial commit of independent AMD compiler')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3273>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3273>

aco: ensure predecessors' p_logical_end is in WQM when a p_phi is in WQM

We want any copies to be in WQM. I don't know if this fixes any real
application, but I can create a vkrunner test than reproduces the issue.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 93c8ebfa780 ('aco: Initial commit of independent AMD compiler')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3273>

pan/midgard: Fix a liveness info leak

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3566>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3566>

etnaviv: implement UBOs

At the same time, use pre-HALTI2 to use address register for indirect
uniform loads, since integers/LOAD instruction isn't always available.

Passes all dEQP-GLES3.functional.ubo.* on GC7000L. GC3000 with an extra
flush hack passes most of them, but still fails on some of the cases with
many loads.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3389>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3389>

freedreno/a6xx: convert blend state to stateobj

And move to new register builders while we are at it.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3565>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3565>

freedreno/a6xx: remove special handling based on MRT format

Logicop in particular is supposed to work for integer formats.. but
maybe this situation doesn't happen in gles.  The only thing that isn't
required for integer formats is blending.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3565>

mesa/st: random whitespace cleanup

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3565>

freedreno: use PIPE_CAP_RGB_OVERRIDE_DST_ALPHA_BLEND

This lets us drop a bunch of special handling for xRGB blend.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3565>

gallium/util: Increase the debug_flush map depth

Some piglit tests trigger a map depth assert when debug_flush is active.
Fix this by increasing the map depth from 16 to 32.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3614>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3614>

svga: Avoid discard DMA uploads

Newer versions of the device code will make discard DMA uploads
sub-optimal. Disable them for guest-backed aware code, where we previously
had them conditionally enabled.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3614>

winsys/svga: Enable transhuge pages for buffer objects

If the kernel supports it, enable transhuge pages for graphics buffer
objects. Except for the syscall itself, this is never expected to cause
any negative performance implications.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3614>

winsys/svga: use new ioctl for logging

Use the new ioctl for logging (rather than duplicating what the kernel
is doing). This way it's also independent from the actual guest/host
mechanism to do the logging.

Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3614>

radv: remove the non conformant VK implementation warning on GFX10

It's no longer true.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3597>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3597>

radv: bump conformance version to 1.2.0.0

https://www.khronos.org/conformance/adopters/conformant-products#submission_472
https://www.khronos.org/conformance/adopters/conformant-products#submission_473
https://www.khronos.org/conformance/adopters/conformant-products#submission_474

Fixes dEQP-VK.api.driver_properties.conformance_version.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3597>

radv: implement VK_AMD_shader_explicit_vertex_parameter

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2402
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

radv: gather which input PS variables use an explicit interpolation mode

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

aco: implement VK_AMD_shader_explicit_vertex_parameter

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

ac/llvm: implement VK_AMD_shader_explicit_vertex_parameter

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

spirv: implement SPV_AMD_shader_explicit_vertex_parameter

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

nir: lower interp_deref_at_vertex to load_input_vertex

This introduces a new NIR intrinsic for loading inputs at a specific
vertex index.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

nir: add nir_intrinsic_interp_deref_at_vertex

From the SPV_AMD_shader_explicit_vertex_parameter extension:
   "Returns the value of the input <interpolant> without any
    interpolation, i.e. the raw output value of previous shader
    stage."

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

nir: lower SYSTEM_VALUE_BARYCENTRIC_* to nir_load_barycentric()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

nir: add nir_intrinsic_load_barycentric_model

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

spirv: add support for SpvBuiltInBaryCoord*

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

compiler: add new SYSTEM_VALUE_BARYCENTRIC_*

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

compiler: add PERSP to the existing barycentric system values

We need the LINEAR versions for AMD_shader_explicit_vertex_parameter.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

spirv: add support for SpvDecorationExplicitInterpAMD

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

compiler: add a new explicit interpolation mode

This introduces one more interpolation mode INTERP_MODE_EXPLICIT,
which is needed for AMD_shader_explicit_vertex_parameter.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3578>

turnip: Fix issues in tu_compute_pipeline_create() that may lead to crash

The shader object is destroyed even if its creation failed. It is also
not destroyed if its compilation or upload fails, leading to leaks.

Finally, tu_compute_pipeline_create() should set output var
pPipeline to VK_NULL_HANDLE if it fails.

Avoids crash on
dEQP-VK.api.object_management.alloc_callback_fail_multiple.compute_pipeline

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3572>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3572>

turnip: Remove failed command buffer from pool

When an error condition occurs during tu_create_cmd_buffer(), the
cmd buffer has already been added to a pool, so the cleanup code should
remove it.

Fixes a crash (assert in tu_device::tu_bo_finish()) in dEQP tests:

dEQP-VK.api.object_management.max_concurrent.command_buffer_primary
dEQP-VK.api.object_management.max_concurrent.command_buffer_secondary

due to pool attempting to destroy an invalid command buffer.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3572>

radeonsi: stop using the VM_ALWAYS_VALID flag

Allocation all the bo as ALWAYS_VALID means they must all fit in memory
(vram + gtt) at each command submission.
This causes some trouble when the total allocated memory is greater than
the available memory.

Possible solutions:
- being able to tag/untag a bo as ALWAYS_VALID: would require kernel changes
- disable VM_ALWAYS_VALID when memory usage is more than a percentage of the
  available memory
- disable VM_ALWAYS_VALID entirely

v1 of this patch implemented option 2. v2 (this version) implements option 3.

Related issues:
 - https://gitlab.freedesktop.org/drm/amd/issues/607
 - https://gitlab.freedesktop.org/mesa/mesa/issues/1257

It also helps with some piglit tests (-t maxsize -t "max[_-].*size" -t maxuniformblocksize):
instead of crashing the machine, the tests fail cleanly.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2190
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3430>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3430>

radv: enable VK_AMD_shader_fragment_mask on GFX6-GFX7

Works fine.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3603>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3603>

loader: Check if the kernel driver is i915 before loading iris

To prevent it from trying to load on say gma500 hardware.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3595>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3595>

anv: Emit CS Stall before Instruction Cache flush for gen12 WA

Before flushing the instruction cache with a pipe control, we need to
use a CS Stall pipe control.

Ref: GEN:BUG:1409226450
Rework: Add stall-at-scoreboard (Lionel)
Rework: Merge with other anvil pre-invalidate stalls (Lionel)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3457>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3457>

iris: Emit CS Stall before Instruction Cache flush for gen12 WA

Before flushing the instruction cache with a pipe control, we need to
use a CS Stall pipe control.

Ref: GEN:BUG:1409226450
Rework: Add stall-at-scoreboard (Lionel)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3457>

zink: set compareEnable when setting compareOp

We need to enable compareEnable for compareOp to be valid, and ANV was
recently updated to respect this. So let's update Zink to match.

This fixes the shadow-variants of several piglit regressions, like these:
spec@arb_shader_texture_lod@execution@tex-miplevel-selection
spec@glsl-1.20@execution@tex-miplevel-selection

Fixes: a19cdf989b1 ("anv: only use VkSamplerCreateInfo::compareOp if enabled")
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3473>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3473>

ci: Enable -Werror on the meson-i386 build.

I find warnings to be very disruptive to my workflow (using emacs's "go to
next error" feature), and I periodically have to go clean up other
people's drivers to get back to finding my own warnings in the noise.  I
know I'm not the only one doing something like this.

We don't want to enable -Werror by default in builds, since it means that
end users will have builds spuriously fail based on what compiler version
and opt flags they have compared to what the devs are using.  However, it
is quite easy to have CI ensure that we at least don't introduce warnings
on the compiler version that it uses.

For now I've just enabled it on meson-i386 to cover a bunch of Mesa core
and get us started on ratcheting up warnings-cleanliness in the tree,
without me having to fix up all the drivers at once.

Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3539>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3539>

mesa/st: Fix compiler warnings from INTEL_shader_integer_functions.

Fixes: 1d165b054863 ("glsl: Add new expressions for INTEL_shader_integer_functions2")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3539>

iris: Silence warning about AUX_USAGE_MC.

It was recently introduced and not added to iris yet it looks like.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3539>

vulkan/wsi: Fix compiler warning when no WSI platforms are enabled.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3539>

docs: update news, calendar, and link release notes for 19.3.3

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3604>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3604>

docs: Add SHA 256 sums for 19.3.3

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3604>

docs: Add relnotes for 19.3.3 release

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3604>

intel/mi_builder: Force write completion on Gen12+

Otherwise, we have no guarantee that the write actually lands before we
move on to other things.  Doing this on every SDI is probably a bit
harsh but it's safe.  We should figure out a good way to avoid this when
we can.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3593>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3593>

anv: Replace one more aux_surface.isl.size_B check

This one was missed in 41bffe09135.

Fixes: 41bffe09135 "anv: Replace aux_surface.isl.size_B checks with..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3593>

intel/blorp: Handle bit-casting UNORM and BGRA formats

In f132e0fddfa, I attempted to allow BLORP to do CCS_E copies by using
the UNORM formats instead.  However, the old BLORP bit-cast code could
only handle RGBA formats and asserted on anything other than UINT
formats.  The reason we didn't catch this is because it only comes up on
Gen12 platforms which aren't in our normal CI yet.

Fixes: f132e0fddfad "intel/blorp: Add support for CCS_E copies with..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3593>

aco: fix combine_salu_not_bitwise() when SCC is used

Previously, we didn't use the SCC bit, and thus, we didn't care about it.
With 'aco: Transform uniform bitwise instructions to 32-bit if possible.'
that changed, so that we have to handle it.

Fixes: 8a32f57fff56b3b94f1b5589feba38016f39427c ('aco: Transform uniform bitwise instructions to 32-bit if possible.')
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3598>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3598>

radeonsi: Clear uninitialized variable

|view| was not initialized leading to flaky test failures in SkQP
test unitTest_ES2BlendWithNoTexture.

Fixes: 029bfa3d253 "radeonsi: add ability to bind images as image buffers"

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3592>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3592>

anv: Handle unavailable queries in vkCmdCopyQueryPoolResults

If VK_QUERY_RESULT_WAIT_BIT is not set, there is currently no
special handling of unavailable queries in vkCmdCopyQueryPoolResults,
and anv will write an invalid value for the query result.

This commit updates vkCmdCopyQueryPoolResults for unavailable
queries to return 0 if the VK_QUERY_RESULT_PARTIAL_BIT flag is set
and if not, skip writing altogether.

Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3586>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3586>

anv: Properly fetch partial results in vkGetQueryPoolResults

Currently, fetching the partial results (VK_QUERY_RESULT_PARTIAL_BIT)
of an unavailable occlusion query via vkGetQueryPoolResults can
return invalid values. anv returns slot.end - slot.begin, but in the
case of unavailable queries, slot.end is still at the initial value
of 0. If slot.begin is non-zero, the occlusion count underflows to
a value that is likely outside the acceptable range of the partial
result.

This commit fixes vkGetQueryPoolResults by always returning 0 if the
query is unavailable and the VK_QUERY_RESULT_PARTIAL_BIT is set.

Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3586>

aco: fix rebase error from GS copy shader support

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: f8f7712666b ('aco: implement GS copy shaders')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3601>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3601>

anv/android: make format_supported_with_usage static

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3532>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3532>

anv/android: setup gralloc1 usage from gralloc0 usage manually

This cuts away dependency to libgrallocusage.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3532>

aco: use MUBUF in some situations instead of splitting vertex fetches

Fixes most of the regressions from splitting vertex fetches in an earlier
commit.

pipeline-db (Vega):
Totals from affected shaders:
SGPRS: 0 -> 0 (0.00 %)
VGPRS: 0 -> 0 (0.00 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 0 -> 0 (0.00 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 0 -> 0 (0.00 %)

pipeline-db (Navi):
Totals from affected shaders:
SGPRS: 562696 -> 558344 (-0.77 %)
VGPRS: 395596 -> 393752 (-0.47 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 11600912 -> 11311804 (-2.49 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 101839 -> 102372 (0.52 %)

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3086>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3086>

aco: value-number MUBUF instructions

We will have to do this when we start creating MUBUF instructions for
load_input because NIR might not be able to tell they are identical since
it doesn't know whether two vertex attributes have the same offset.

No pipeline-db changes.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3086>

aco: handle unaligned vertex fetch on GFX10

pipeline-db (Vega):
Totals from affected shaders:
SGPRS: 0 -> 0 (0.00 %)
VGPRS: 0 -> 0 (0.00 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 0 -> 0 (0.00 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 0 -> 0 (0.00 %)

pipeline-db (Navi):
Totals from affected shaders:
SGPRS: 795000 -> 802368 (0.93 %)
VGPRS: 579632 -> 581280 (0.28 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 17208408 -> 17583652 (2.18 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 145731 -> 145279 (-0.31 %)

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3086>

aco: skip unused channels at the start when fetching vertices

pipeline-db (Vega):
Totals from affected shaders:
SGPRS: 161320 -> 161224 (-0.06 %)
VGPRS: 153968 -> 149408 (-2.96 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 4331496 -> 4331308 (-0.00 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 27814 -> 28594 (2.80 %)

pipeline-db (Navi):
Totals from affected shaders:
SGPRS: 161504 -> 161408 (-0.06 %)
VGPRS: 153836 -> 149440 (-2.86 %)
Spilled SGPRs: 0 -> 0 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 4327572 -> 4327604 (0.00 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 27837 -> 28618 (2.81 %)

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3086>

aco: rework vertex fetching a bit

This will make it easier to skip unused channels at the start and to split
unaligned loads on GFX10.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3086>

amd/common,radv: move vertex_format_table to ac_shader_util.{h,c}

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3086>

gallium/swr: fix tessellation state save/restore

Tessellation state should be saved with TCS/TES state
when binding new state and restored if old state
is set again.

Reviewed-by: Krzysztof Raszkowski <krzysztof.raszkowski@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3596>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3596>

lima: disable early-z if fragment shader uses discard

We have to disable early-z if fragment shader uses discard,
otherwise we'll get misrendering.

Reported-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3570>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3570>

lima: ppir: always create move and update ld_tex successors for all blocks

Always create a mov for ld_tex since we can't rely on
ppir_node_has_single_src_succ() if we have multiple blocks. And since
ld_tex successor can be in a different block we have to update their
ppir_src as well.

Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3564>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3564>

lima: ppir: don't delete root ld_tex nodes without successors in current block

We don't clone ld_tex nodes into each block anymore, so ld_tex may have
successors in another block.

Fixes: c8554f849e41 ("lima/ppir: don't clone texture loads")
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3564>

freedreno/drm: fix invalid-cmdstream-size with older kernels

A cmdstream of size zero is invalid.  But this can appear in various
places where we emit a pointer to state.  This doesn't show up with
newer kernels (newer than v5.0) which use "softpin", but on earlier
kernels can result in:

  [drm:msm_ioctl_gem_submit [msm]] *ERROR* invalid cmdstream size: 0

Since the pointer value doesn't matter in these cases, the easy solution
is just to not emit a cmds table entry in this case.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2805>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2805>

Revert "winsys/amdgpu: Re-use amdgpu_screen_winsys when possible"

This reverts commit b60f5cbc15a99ddd9251bce40eae7d84c3a1c373.

This fixes dmesg errors and X freezes:
[   29.543096] amdgpu 0000:0c:00.0: No GEM object associated to handle 0x00000009, can't create framebuffer
[   29.543103] amdgpu 0000:0c:00.0: No GEM object associated to handle 0x00000009, can't create framebuffer

Revert "winsys/amdgpu: Close KMS handles for other DRM file descriptions"

This reverts commit 552028c013cc1d49a2b61ebe0fc3a3781a9ba826.

Required by the next reverted commit.

anv: Insert holes for non-existant XFB varyings

Thanks to optimizations, it's possible for varyings to get deleted but
still leave the variable there for nir_gather_xfb_info to find.  If we
get into this case, insert a hole.

Fixes: 36ee2fd61c8 "anv: Implement the basic form of..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3520>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3520>

intel/genxml: Make SO_DECL::"Hole Flag" a Boolean

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3520>

intel/compiler: Clear accumulator register before EOT

v2: (Francisco Jerez)
- Drop vec4 changes.
- Handle explicit acc0 operand and implicit one.
- Make sure instruction is SIMD16, prediction is off and default mask
  control set to true.

v3: (Francisco Jerez)
- Clear accumulator only when it's written.
- Use BRW_MASK_DISABLE instead of true.
- Use correct width for brw_acc_reg().
- Fix last_inst_offset.

v4: (Francisco Jerez)
- Don't check for last instruction for accummulator write.

Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3376>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3376>

pan/midgard: Remove float_bitcast

Now unused.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3588>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3588>

radv: do not allow sparse resources with multi-planar formats

It's unsupported.

Fixes some fails or hangs with
dEQP-VK.sparse_resources.image_sparse_binding.*

Cc: 19.3 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3581>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3581>

panfrost/midgard: Prettify embedded constant prints

Until now, embedded constants were printed as all 32 bits integer or
floats, but the compiler can pack constant from different types if
severa instructions with different reg_mode and native type refer to
the constant register. Let's implement something smarter so users don't
have to do a manual conversion when looking at a trace.

Note that 8-bit constants are not decoded yet, as we're not sure how
the writemask is encoded in that case.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3536>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3536>

panfrost/midgard: Add a condense_writemask() helper

This way we can convert an 8-bit writemask (Midgard specific
representation) into the more common 1-bit/component representation.

8-bit mode is not supported yet, as we're not sure how the writemask is
encoded for this mode.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3536>

aco: fix literal application with v_cndmask_b32/v_addc_co_u32/etc

No pipeline-db changes

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 0be74090696 ('aco: rewrite literal combining')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3541>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3541>

aco: always add sgprs to sgpr_ids when choosing literals

Even if it's a literal, we should add this to sgpr_ids.
No pipeline-db changes.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 0be74090696 ('aco: rewrite literal combining')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3541>

aco: fix operand to scc when selecting SGPR ufind_msb/ifind_msb

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 93c8ebfa78 ('aco: Initial commit of independent AMD compiler')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3541>

aco: fix WaR check for >64-bit FLAT/GLOBAL instructions

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 5986e0019 ('aco: improve WAR hazard workaround with >64bit stores')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3541>

pan/midgard: Handle tag 0x4 as texture

Used for barriers which work as texture ops.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3580>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3580>

pan/midgard: Validate barriers use a barrier tag

...and that non-barriers don't use a barrier tag. It's not clear what
the difference means quite yet, though.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3580>

pan/midgard: Disassemble barrier instructions

We don't need to print all the usual texture noise; just the relevant
fields and the rest can be guarded to zero.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3580>

pan/midgard: Record TEXTURE_OP_BARRIER

It's 0x0B for whatever reason.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3580>

pan/decode: Drop MFBD compute shader stuff

This is triggering all sorts of failures in pandecode and is only mostly
spurious. Let's not overwhelm ourselves with this yet.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3580>

panfrost: Don't copy uniforms when the size is zero

This fixes a crash when using Gallium HUD with QuakeSpasm when gamma
correction shaders (a QuakeSpasm feature, not part of Mesa) are used.

Reviewd-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3549>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3549>

radv/winsys: set IB flags prior to submit in the sysmem path

This fixes missing scene objects in ZUSI 3 + dxvk. Index / vertex buffer
upload using thousands of CopyBuffer commands in one huge Vulkan command
buffer, mixed with lots of render pass begin/end and draw calls, failed
for some of the buffers.

radv divides the huge command buffer into 3 IBs, and they had random
flags set because the field was uninitialized. Maybe IBs got discarded
if they had the PREAMBLE bit set.

Signed-off-by: Florian Will <florian.will@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: <mesa-stable@lists.freedesktop.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3577>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3577>

docs: document AMD_DEBUG variable

See https://gitlab.freedesktop.org/mesa/mesa/issues/2022

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3492>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3492>

radeonsi: move AMD_DEBUG tests to AMD_TEST

AMD_DEBUG env var is stored in a 64 bits int and has 64 different values.
This commit makes some space by moving the test* special values to AMD_TEST.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3492>

gallivm/nir: add missing break for isub.

Pointed out by coverity scan.

Fixes: 3adf74f2ef55 ("gallivm: pick integer builders for alu instructions.")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3571>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3571>

isl: add gen12 comment about CCS for linear tiling

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3551>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3551>

isl: drop CCS row pitch requirement for linear surfaces

We were applying row pitch constraint of CCS surfaces to linear
surfaces. But CCS is only supported in linear tiling under some
condition (more on that in the following commit). So let's drop that
requirement for now.

Fixes a bunch of crucible assert where the byte size of a linear image
is expected to be similar to the byte size of buffer for the same
extent in the following category :

   func.miptree.r8g8b8a8-unorm.aspect-color.view-2d.*download-copy-with-draw.*

v2: Move restriction to isl_calc_tiled_min_row_pitch()

v3: Move restrinction to isl_calc_row_pitch_alignment() (Jason)

v4: Update message (Lionel)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 07e16221d975 ("isl: Round up some pitches to 512B for Gen12's CCS")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3551>

intel: Implement Gen12 workaround for array textures of size 1

Gen12 does not support RENDER_SURFACE_STATE::SurfaceArray = true &&
RENDER_SURFACE_STATE::Depth = 0. SurfaceArray can only be set to true
if Depth >= 1.

We workaround this limitation by adding the max(value, 1) snippet in
the shaders on the 3 components for texture array sizes.

Tested on Gen9 with the following Vulkan CTS tests :
dEQP-VK.image.image_size.2d_array.*

v2: Drop debug print (Tapani)
    Switch to GEN:BUG instead of Wa_

v3: Fix dEQP-VK.image.image_size.1d_array.* cases (Lionel)

v4: Fix dEQP-VK.glsl.texture_functions.query.texturesize.* cases
    (Missing tex_op handling) (Lionel)

v5: Missing break statement (Lionel)

v6: Fixup comment (Tapani)

v7: Fixup comment again (Tapani)

v8: Don't use sample_dim as index (Jason)
    Rename pass
    Simplify control flow

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com> (v7)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3362>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3362>

intel/isl: Allow CCS_E on more formats

Now that BLORP supports copies on everything except R11G11B10_FLOAT,
we should be able to support CCS_E those formats.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3554>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3554>

intel/blorp: Add support for CCS_E copies with UNORM formats

Some of the smaller bit-size formats which support CCS_E don't have a
UINT representative in their compression class.  However, we should be
able to use UNORM just fine and still get bit-exact copies.  We just
have to do a conversion to/from UNORM when we bitcast.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3554>

lima/ppir: fix src read mask swizzling

The src mask can't be calculated from the dest write_mask.
Instead, it must be calculated from the swizzled operators of the src.
Otherwise, liveness calculation may report incorrect live components for
non-ssa registers.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>

lima/ppir: split ppir_op_undef into undef and dummy again

Those were renamed/merged some time ago but it turns out that
ppir_op_undef can't be shared.
It was being used for undefined ssa operations and for read-before-write
operations that may happen to e.g. uninitialized registers (non-ssa)
inside a loop.
We really don't want to reserve a register for the undef ssa case, but
we must reserve and allocate register for the unitialized register case
because when it happens inside a loop it may need to hold its value
across iterations.

This dummy node might be eliminated with a code refactor in ppir in case
we are able to emit the write and allocate the ppir_reg before we emit
the read. But a major refactor we need this to keep this code to avoid
apparent regressions with the new liveness analysis implementation.

Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3502>