vc4: When doing algebraic optimization into a MOV, use the right MOV.

If there were src unpacks, changing to the integer MOV instead of float
(for example) would change the unpack operation.

vc4: Fix handling of src packs on in qir_follow_movs().

The caller isn't going to expect it from a return, so it would probably
get misinterpreted.  If the caller had an unpack in its reg, that's fine,
but don't lose track of it.

vc4: Add missing progress note in opt_algebraic.

vc4: Add debugging of the estimated time to run the shader to shader-db.

vc4: Fix handling of sample_mask output.

I apparently broke this in a late refactor, in such a way that I decided
its tests were some of those interminable ones that I should just
blacklist from my testing.  As a result, the refactors related to it were
totally wrong.

softpipe: enable GL_ARB_viewport_array support, update GL3.txt doc

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

softpipe: implement some support for multiple viewports

Mostly related to making sure the rasterizer can correctly
pick out the correct scissor box for the current viewport.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

draw: don't assume fixed offset for data in struct vertex_info

Otherwise, if struct vertex_info is changed, you're in for some surprises...

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

i965/gen9: Don't do fast clears when GL_FRAMEBUFFER_SRGB is enabled

When GL_FRAMEBUFFER_SRGB is enabled any single-sampled renderbuffers
are resolved in intel_update_state because the hardware can't cope
with fast clears on SRGB buffers. In that case it's pointless to do a
fast clear because it will just be immediately resolved.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/gen9: Allow fast clears for non-MSRT SRGB buffers

SRGB buffers are not marked as losslessly compressible so previously
they would not be used for fast clears. However in practice the
hardware will never actually see that we are using SRGB buffers for
fast clears if we use the linear equivalent format when clearing and
make sure to resolve the buffer as a linear format before sampling
from it.

This is an important use case because by default the window system
framebuffers are created as SRGB so without this fast clears won't be
used there.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/gen9: Resolve SRGB color buffers when GL_FRAMEBUFFER_SRGB enabled

SKL can't cope with the CCS buffer for SRGB buffers. Normally the
hardware won't see the SRGB formats because when GL_FRAMEBUFFER_SRGB
is disabled these get mapped to their linear equivalents. In order to
avoid relying on the CCS buffer when it is enabled this patch now
makes it flush the renderbuffers.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/gen8+: Don't upload the MCS buffer for single-sampled textures

For single-sampled textures the MCS buffer is only used to implement
fast clears. However the surface always needs to be resolved before
being used as a texture anyway so the the MCS buffer doesn't actually
achieve anything. This is important for Gen9 because in that case SRGB
surfaces are not supported for fast clears and we don't want the
hardware to see the MCS buffer in that case.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

i965/meta-fast-clear: Disable GL_FRAMEBUFFER_SRGB during clear

Adds MESA_META_FRAMEBUFFER_SRGB to the meta save state so that
GL_FRAMEBUFFER_SRGB will be disabled when performing the fast clear.
That way the render surface state will be programmed with the linear
equivalent format during the clear. This is important for Gen9 because
the SRGB formats are not marked as losslessly compressible so in
theory they aren't support for fast clears. It shouldn't make any
difference whether GL_FRAMEBUFFER_SRGB is enabled for the fast clear
operation because the color is not actually written to the framebuffer
so there is no chance for the hardware to apply the SRGB conversion on
it anyway.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

winsys/amdgpu: clear the buffer cache on mmap failure and try again

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/radeon: clear the buffer cache on mmap failure and try again

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/amdgpu: clear the buffer cache on allocation failure and try again

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/radeon: clear the buffer cache on allocation failure and try again

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

gallium/radeon: remove radeon_winsys_cs_handle

"radeon_winsys_cs_handle *cs_buf" is now equivalent to "pb_buffer *buf".

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/radeon: use pb_cache instead of pb_cache_manager

This is a prerequisite for the removal of radeon_winsys_cs_handle.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/radeon: use radeon_bomgr less

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/radeon: rename radeon_bomgr_init_functions

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/radeon: move variables from radeon_bomgr to radeon_drm_winsys

radeon_bomgr is going away.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/radeon: remove redundant radeon_bomgr::va

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/amdgpu: don't use the "rws" abbreviation for amdgpu_winsys

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/amdgpu: use pb_cache instead of pb_cache_manager

This is a prerequisite for the removal of radeon_winsys_cs_handle.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

gallium/pb_bufmgr_cache: use the new pb_cache module

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>

gallium/pb_cache: add a copy of cache bufmgr independent of pb_manager

This simplified (basically duplicated) version of pb_cache_manager will
allow removing some ugly hacks from radeon and amdgpu winsyses and
flatten simplify their design.

The difference is that winsyses must manually add buffers to the cache
in "destroy" functions and the cache doesn't know about the buffers before
that. The integration is therefore trivial and the impact on the winsys
design is negligible.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: implement fast stencil clear

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

radeonsi: re-enable Hyper-Z for stencil

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

r600g: remove a Hyper-Z workaround that's likely not needed anymore

FORCE_OFF == 0, no need to set that

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

r600g: re-enable Hyper-Z for stencil on Evergreen & Cayman

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

gallium/radeon: fix Hyper-Z hangs by programming PA_SC_MODE_CNTL_1 correctly

This is the recommended setting according to hw people and it makes Hyper-Z
stable. Just the two magic states.

This fixes Evergreen, Cayman, SI, CI, VI (using the Cayman code).

Cc: 11.0 11.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

radeonsi: don't use the CP DMA workaround on Fiji and newer

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

radeonsi: apply the streamout workaround to Fiji as well

Cc: 11.0 11.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

radeonsi: also print hexadecimal values for register fields in the IB parser

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

radeonsi: implement RB+ for Stoney (v2)

v2: fix dual source blending

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

radeonsi: don't call of u_prims_for_vertices for patches and rectangles

Both caused a crash due to a division by zero in that function.
This is an alternative fix.

Cc: 11.0 11.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

radeonsi: use tgsi_shader_info::colors_written

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

r600g: write all MRTs only if there is exactly one output (fixes a hang)

This fixes a hang in
piglit/arb_blend_func_extended-fbo-extended-blend-pattern_gles2 on REDWOOD.

Cc: 11.0 11.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

tgsi/scan: add flag colors_written

This is a prerequisite for the following r600g fix.

Cc: 11.0 11.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Revert "radeonsi: disable DCC on Stoney"

This reverts commit 32f05fadbbdf2a3fb60055e610bbbdcd82dd3ce5.

It turned out the problem with Stoney was caused by incorrect handling of
a non-power-two VRAM size in the kernel driver.
This is an optional BIOS setting and can be worked around by choosing
a different VRAM size in the BIOS.

Cc: 11.1 <mesa-stable@lists.freedesktop.org>

nir: silence uninitialized warning

Reviewed-by: Rob Clark <robdclark@gmail.com>

mesa/shader: return correct attribute location for double matrix arrays

If we have a dmat2[4], then dmat2[0] is at 17, dmat2[1] at 19,
dmat2[2] at 21 etc. The old code was returning 17,18,19.

I think this code is also wrong for float matricies as well.

There is now a piglit for the float case.

This partly fixes:
GL41-CTS.vertex_attrib_64bit.limits_test

[airlied: update with Tapani suggestion to clean it up].

Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

draw: fix clipping with linear interpolated values and gl_ClipVertex

Discovered this when working on other clip code, apparently didn't work
correctly - the combination of linear interpolated values and using
gl_ClipVertex produced wrong values (failing all such combinations
in piglits glsl-1.30 interpolation tests, named
interpolation-noperspective-XXX-vertex).
Use the pre-clip-pos values when determining the interpolation factor to
fix this.
Noone really understands this code well, but everybody agrees this looks
sane... This fixes all those failing tests (10 in total) both with
the llvm and non-llvm draw paths, with no piglit regressions.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

r600: add missing return value check.

Pointed out by coverity scan.

Signed-off-by: Dave Airlie <airlied@redhat.com>

nir: Get rid of *_indirect variants of input/output load/store intrinsics

There is some special-casing needed in a competent back-end.  However, they
can do their special-casing easily enough based on whether or not the
offset is a constant.  In the mean time, having the *_indirect variants
adds special cases a number of places where they don't need to be and, in
general, only complicates things.  To complicate matters, NIR had no way to
convdert an indirect load/store to a direct one in the case that the
indirect was a constant so we would still not really get what the back-ends
wanted.  The best solution seems to be to get rid of the *_indirect
variants entirely.

This commit is a bunch of different changes squashed together:

 - nir: Get rid of *_indirect variants of input/output load/store intrinsics
 - nir/glsl: Stop handling UBO/SSBO load/stores differently depending on indirect
 - nir/lower_io: Get rid of load/store_foo_indirect
 - i965/fs: Get rid of load/store_foo_indirect
 - i965/vec4: Get rid of load/store_foo_indirect
 - tgsi_to_nir: Get rid of load/store_foo_indirect
 - ir3/nir: Use the new unified io intrinsics
 - vc4: Do all uniform loads with byte offsets
 - vc4/nir: Use the new unified io intrinsics
 - vc4: Fix load_user_clip_plane crash
 - vc4: add missing src for store outputs
 - vc4: Fix state uniforms
 - nir/lower_clip: Update to the new load/store intrinsics
 - nir/lower_two_sided_color: Update to the new load intrinsic

NIR and i965 changes are

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NIR indirect declarations and vc4 changes are

Reviewed-by: Eric Anholt <eric@anholt.net>
ir3 changes are

Reviewed-by: Rob Clark <robdclark@gmail.com>
NIR changes are

Acked-by: Rob Clark <robdclark@gmail.com>

i965/fs_nir: Refactor store_output, load_input, and load_uniform

There was way too much incrementing of things going on.  Instead, let's
just start everything off at the right base location, and then increment in
the loop.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

gallium/util: return correct number of bound vertex buffers

In case a state tracker unbinds every slot by a seperate
pipe->set_vertex_buffers() call, starting from slot zero, the number
of bound buffers would not reach zero at all.
The current algorithm does not account for pre-existing holes in the
buffer list.

Unbinding all buffers at once or starting at the top-most slot results
in correct behaviour.

Calculating the correct number of bound buffers fixes a NULL pointer
dereference in nvc0_validate_vertex_buffers_shared().

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93004
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>

blit: Don't take into account the Mesa format when checking MSRT blit

According to the GLES3 spec, blitting between multisample FBOs with
different internal formats should not be allowed. The
compatible_resolve_formats function implements this check. Previously
it had a shortcut where if the Mesa formats of the two renderbuffers
were the same then it would assume the blit is ok. However some
drivers map different internal formats to the same Mesa format, for
example it might implement both GL_RGB and GL_RGBA textures with
MESA_FORMAT_R8G8B8A_UNORM. The function is used to generate a GL error
according to what the GL spec requires so the blit should not be
allowed in that case. This patch just removes the shortcut so that it
only ever looks at the internal format.

Note that I posted a related patch to disable this check altogether
for desktop GL. However this function is still used on GLES3 because
there are conformance tests that require this behaviour so this patch
is still useful.

Cc: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

i965: Check base format to determine whether to use tiled memcpy

The tiled memcpy doesn't work for copying from RGBX to RGBA because it
doesn't override the alpha component to 1.0. Commit 2cebaac479d4 added
a check to disable it for RGBX formats by looking at the TexFormat.
However a lot of the rest of the code base is written with the
assumption that an RGBA texture can be used internally to implement a
GL_RGB texture. If that is done then this check breaks. This patch
makes it instead check the base format of the texture which I think
more directly matches the intention.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i965/gen8: Allow rendering to B8G8R8X8

Since Gen8 this is allowed as a rendering target so we don't need to
override it to B8G8R8A8. This is helpful on Gen9+ where using this
override causes fast clears not to work.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>

i965/gen9: Allow fast clear for MSRT formats matching render

Previously fast clear was disallowed on Gen9 for MSRTs with the claim
that some formats don't work but we didn't understand why. On further
investigation it seems the formats that don't work are the ones where
the render surface format is being overriden to a different format
than the one used for texturing. The one used for texturing is not
actually a renderable format. It arguably makes sense that the sampler
hardware doesn't handle the fast color correctly in these cases
because it shouldn't be possible to end up with a fast cleared surface
that is non-renderable.

This patch changes the limitation to prevent fast clear for surfaces
where the format for rendering is overriden.

Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>

i965/gen9/fast-clear: Handle linear→SRGB conversion

If GL_FRAMEBUFFER_SRGB is enabled when writing to an SRGB-capable
framebuffer then the color will be converted from linear to SRGB
before being written. There is no chance for the hardware to do this
itself because it can't modify the clear color that is programmed in
the surface state so it seems pretty clear that the driver should be
handling this itself.

Note that this wasn't a problem before Gen9 because previously we were
only able to do fast clears to 0 or 1 and those values are the same in
linear and SRGB space.

Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

docs: Add ARB_compute_shader to 11.2.0 release notes

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

docs: Mark ARB_compute_shader as done for i965

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

i965: Enable ARB_compute_shader extension on supported hardware

Enable ARB_compute_shader on gen7+, on hardware that supports the
OpenGL 4.3 requirements of a local group size of 1024.

With SIMD16 support, this is limited to Ivy Bridge and Haswell.

Broadwell will work with a local group size up to 896 on SIMD16
meaning programs that use this size or lower should run when setting
MESA_EXTENSION_OVERRIDE=GL_ARB_compute_shader.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

i965/nir: Implement shared variable atomic operations

v3:
 * Update based on latest SSBO code (Iago)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

nir: Add nir intrinsics for shared variable atomic operations

v3:
 * Update min/max based on latest SSBO code (Iago)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Disable several optimizations on shared variables

Shared variables can be accessed by other threads within the same
local workgroup. This prevents us from performing certain
optimizations with shared variables.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Buffer atomics are supported for compute shaders

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Translate atomic intrinsic functions on shared variables

When an intrinsic atomic operation is used on a shared variable, we
translate it to a new 'shared variable' specific intrinsic function
call.

For example, a call to __intrinsic_atomic_add when used on a shared
variable will be translated to a call to
__intrinsic_atomic_add_shared.

v3:
 * Fix stale comments copied from SSBOs (Iago)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Check for SSBO variable in check_for_ssbo_store

The compiler probably already blocks this earlier on, but we should be
checking for an SSBO here.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Check for SSBO variable in SSBO atomic lowering

When an atomic function is called, we need to check to see if it is
for an SSBO variable before lowering it to the SSBO specific intrinsic
function.

v2:
 * is_in_buffer_block => is_in_shader_storage_block (Iago)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Replace atomic_ssbo and ssbo_atomic with atomic

The atomic functions can also be used with shared variables in compute
shaders.

When lowering the intrinsic in lower_ubo_reference, we still create an
SSBO specific intrinsic since SSBO accesses can be indirectly
addressed, whereas all compute shader shared variable live in a single
shared variable area.

v2:
 * Also remove the _internal suffix from ssbo atomic intrinsic names (Iago)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Allow atomic functions to be used with shared variables

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

i965: Lower shared variable references to intrinsic calls

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

i965: Enable shared local memory for CS shared variables

v3:
 * Check shared variable size at link time

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

i965/fs: Handle nir shared variable store intrinsic

v4:
 * Apply similar optimization for shared variable stores as
   0cb7d7b4b7c32246d4c4225a1d17d7ff79a7526d. This was causing a
   OpenGLES 3.1 CTS failure, but
   867c436ca841b4196b4dde4786f5086c76b20dd7 fixes that.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

i965/fs: Handle nir shared variable load intrinsic

v3:
 * Remove extra #includes (Iago)
 * Use recently added GEN7_BTI_SLM instead of BRW_SLM_SURFACE_INDEX (curro)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

i965: Disable vector splitting on shared variables

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

nir: Translate glsl shared var store intrinsic to nir intrinsic

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

nir: Translate glsl shared var load intrinsic to nir intrinsic

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Add lowering pass for shared variable references

In this lowering pass, shared variables are decomposed into intrinsic
calls.

v2:
 * Send mem_ctx as a parameter (Iago)

v3:
 * Shared variables don't have an associated interface block (Iago)
 * Always use 430 packing (Iago)
 * Comment / whitespace cleanup (Iago)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Don't assert on shared variable matrices with 'inherited' layout

We use column-major for shared variable matrices.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Don't lower_variable_index_to_cond_assign for shared variables

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: Remove mem_ctx as member variable in lower_ubo_reference_visitor

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl ubo/ssbo: Move common code into lower_buffer_access::setup_buffer_access

This code will also be usable by the pass to lower shared variables.

Note, that *const_offset is adjusted by setup_buffer_access so it must
be initialized before calling setup_buffer_access.

v2:
 * Add comment for lower_buffer_access::setup_buffer_access

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl ubo/ssbo: Move is_dereferenced_thing_row_major into lower_buffer_access

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl ubo/ssbo: Add lower_buffer_access class

This class has code that will be shared by lower_ubo_reference and
lower_shared_reference. (lower_shared_reference will be used to
support compute shader shared variables.)

v2:
 * Add lower_buffer_access.h to makefile (Emil)
 * Remove static is_dereferenced_thing_row_major from
   lower_buffer_access.cpp. This will become a lower_buffer_access
   method in the next commit.
 * Pass mem_ctx as parameter rather than using a member variable (Iago)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl ubo/ssbo: Split buffer access to insert_buffer_access

This allows the code in emit_access to be generic enough to also be
for lowering shared variables.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl ubo/ssbo: Use enum to track current buffer access type

v2:
 * Rename ssbo_get_array_length to ssbo_unsized_array_length_access (Iago)
 * Use always use this-> when referencing buffer_access_type (Iago)

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: do not loose always_active_io when packing varyings

Otherwise packed and inactive varyings get optimized away. This needs
to be prevented when using separate shader objects where interface
needs to be preserved.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

mesa: invalidate pipeline status after glUseProgramStages

This will cause validation to run during next draw, this is done
because possible changes in used stages and programs can cause
invalid pipeline state.

This fixes a subtest in following CTS test:
ES31-CTS.sepshaderobjs.StateInteraction

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>

mesa/varray: set double arrays to non-normalised.

Doesn't have any effect in practice I don't think, but
CTS reads back using GetVertexAttrib.

This fixes: GL41-CTS.vertex_attrib_64bit.get_vertex_attrib

Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

clover: Fix build against LLVM 3.8 SVN >= r255078

Reviewed-by: Francisco Jerez <currojerez@riseup.net>

mesa: fix ID usage for buffer warnings

We need a different ID pointer for each call site.

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

docs: remove stray <ul> tag from 11.0.5.html file to fix indentation

freedreno: little clean up in fd_create_surface

in order to avoid returing invalid adress if CALLOC_STRUCT return NULL.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno: change to goto fail

in fd_resource_transfer_map, like the others error cases

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno: fix bind_sampler_states when hwcso is NULL

src/gallium/tests/trivial/compute.c expects samplers to be cleaned
when the samplers list is NULL.
Like in radeon, the function behave like when the number of samplers
parameter is set to 0.

[small s/hwsco/hwcso/ typo fix]
Signed-off-by: Rob Clark <robclark@freedesktop.org>

gallium/util: Make u_prims_for_vertices() safe

Let us avoid trapping in hardware from a SIGFPE and instead
assert on a zero divisor.

Hint: This can occur if a PIPE_PRIM_? is not handled in
      u_prim_vertex_count() that results in ' info ' not
      being initialized in the expected manner.

Further, we also fix a possibly NULL pointer dereference
from ' info ' being NULL from a u_prim_vertex_count() call.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

docs: add news item for mesa-demos 8.3.0 release

Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>

nv50,nvc0: fix use-after-free when vertex buffers are unbound

Always reset the vertex bufctx to make sure there's no pointer to
an already freed pipe_resource left after unbinding buffers.
Fixes use after free crash in nvc0_bufctx_fence().

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93004
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
[imirkin: simplify nvc0 fix, apply to nv50]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>

mesa: Fix a typo in a comment

s/suports/supports/

Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

glx: Fix a typo in a comment

s/suports/supports/

Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

st/osmesa: Fix a typo in a comment

s/suport/support/

Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

meta: Fix a typo in a print message

s/Unkown/Unknown/

Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: Fix typos in print messages

s/inconsistant/inconsistent/
s/occurences/occurrences/

Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

glsl: Fix a typo in a comment

s/suports/supports/

Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

svga: initialize pipe_driver_query_info entries with a macro

To be safe, set all the fields in case the enums ordering/values
ever change.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>