KIM JungYong [Mon, 18 Jul 2016 10:12:55 +0000 (19:12 +0900)]
Applied CAUtil callback changes.
CAUtil callback of Provider and Consumer is changed.
Change-Id: Ibf0cc0d33def6760bce2f6e4fce9fe6b89dc2dc0
Signed-off-by: KIM JungYong <jyong2.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9439
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Tested-by: Uze Choi <uzchoi@samsung.com>
KIM JungYong [Thu, 14 Jul 2016 06:23:27 +0000 (15:23 +0900)]
Added Consumer API for enable to cloud service.
NSConsumerEnableRemoteService() is added for subscribe on cloud notification service.
Discover logic is updated for seperated TCP and cloud working flow.
Cloud flag is added on NSProviderConnectionInfo sturcture.
Change-Id: I09d5ba588ba081e0b91916554b8a13b8f8ae8467
Signed-off-by: KIM JungYong <jyong2.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9387
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Hun-je Yeon [Mon, 18 Jul 2016 05:12:02 +0000 (14:12 +0900)]
Merge branch 'master' into notification-service
Add recent changes of master branch into notification-service
Exclude notification service from build,
because CA changes need to be applied both of provider and consumer.
It will be changed in next commit
Change-Id: Id9bb9391c648b76d811034b896a933f42de89328
Signed-off-by: Hun-je Yeon <hunje.yeon@samsung.com>
Daniel Ferguson [Thu, 14 Jul 2016 20:51:25 +0000 (13:51 -0700)]
Fixed conditional logging output in Routing lib
Change-Id: I5e295a016cbf7840265c92dea15ff5e9de5992b1
Signed-off-by: Daniel Ferguson <daniel.j.ferguson@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9401
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
ch79.cho [Thu, 7 Jul 2016 09:37:46 +0000 (18:37 +0900)]
Publish resource to cloud
The changes are about cloud notification service on provider side.
The provider service publishes its resource through cloud interface.
An application is required to call NSEnableRemoteSerivce(..) API
to publish it after login process.
Change-Id: I271c81858f2d1e63bc49ef0fa0012dde48a9c11a
Signed-off-by: ch79.cho <ch79.cho@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9213
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Tested-by: Uze Choi <uzchoi@samsung.com>
George Nash [Tue, 28 Jun 2016 00:51:18 +0000 (17:51 -0700)]
Clean up unused-parameter warnings
Commented out the unused parameters to prevent the -Wunused-parameter
in warning in callback functions.
For parameters that are only used in DEBUG mode the OC_UNUSED micro
is used to prevent the unused-parameter waring for the release build.
Change-Id: I72f497b15c95ddd9879bc9b92f97a66259c7e074
Signed-off-by: George Nash <george.nash@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8979
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
George Nash [Tue, 28 Jun 2016 00:09:36 +0000 (17:09 -0700)]
Cleaned up type-limits compiler warning
pdu.c [-Wtype-limites] the comparison was always true due
to the range of data types.
Change-Id: If7981691218a3eece4da1941d5d5679266c401a9
Signed-off-by: George Nash <george.nash@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8977
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Daniel Ferguson [Wed, 6 Jul 2016 17:58:13 +0000 (10:58 -0700)]
Fix warnings in caipserver.c
Change-Id: Ibda0f4201d7127043fa66d3d39df6f421f8f7caa
Signed-off-by: Daniel Ferguson <daniel.j.ferguson@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9199
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: David Antler <david.a.antler@intel.com>
Reviewed-by: Dave Thaler <dthaler@microsoft.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Jaehong Jo [Fri, 8 Jul 2016 06:53:52 +0000 (15:53 +0900)]
Parsing about a payload including resource information of multiple devices
Assuming the siatuation that many servers published their resource information into resource directory(RD),
then the RD will send response including multiple device information for the discovery request by resouce type.
That means a response payload will be comprised of multiple device list including resource information.
But now, the resource client can parse only the first device's resource information..
There is the payload I tested as follow
[
{ di=
717111ce-31c1-47a0-81a1-3e39eca,
links=[
{href=/q/resource_foo1, rt=core.foo, if=oic.if.baseline, p={bm=1}},
{href=/q/resource_foo2, rt=core.foo, if=oic.if.baseline, p={bm=1}}
]
},
{ di=
a7b77e75-e6d5-4158-af16-3a4dd95,
links=[
{href=/q/resource_foo1, rt=core.foo, if=oic.if.baseline, p={bm=1}},
{href=/q/resource_foo2, rt=core.foo, if=oic.if.baseline, p={bm=1}}
]
}
]
Change-Id: Ic1f58c473ab91a497508b2425a4ad07692120054
Signed-off-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9245
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Jaehong Jo [Thu, 14 Jul 2016 10:36:23 +0000 (19:36 +0900)]
Add success of 'OC_STACK_RESOURCE_CHANGED' return code.
Refer to https://gerrit.iotivity.org/gerrit/#/c/9287/
Change-Id: I65682364bcf91b40e28a31006993e9d8dc90e7af
Signed-off-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9391
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
David Antler [Tue, 12 Jul 2016 22:26:52 +0000 (15:26 -0700)]
Speed up run.bat execution
Running the Visual Studio scripts can take some time, so only execute
them in a "run build" scenario.
Change-Id: I96b05072a133e124161af1c969b4ab3c5cd05aba
Signed-off-by: David Antler <david.a.antler@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9335
Reviewed-by: Dave Thaler <dthaler@microsoft.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Ziran Sun [Mon, 11 Jul 2016 13:38:00 +0000 (14:38 +0100)]
Add support of 'OC_STACK_RESOURCE_CHANGED' return code.
This is to map 'UPDATE' or 'CHANGED' code in coap.
JIRA Issue: https://jira.iotivity.org/browse/IOT-1191
Change-Id: Ic5b426cbb1560a989305a600070a77dbe90f01e1
Signed-off-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9287
Reviewed-by: Habib Virji <habib.virji@samsung.com>
Reviewed-by: dongik Lee <dongik.lee@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
vimala.v [Tue, 28 Jun 2016 11:23:49 +0000 (16:53 +0530)]
[ARDUINO] Resolved build error for WITH_TCP=TRUE
Change-Id: I46e116467d30b48c54d4ff51303edad95c9748a7
Signed-off-by: vimala.v <vimala.v@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8995
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
bg.chun [Fri, 8 Jul 2016 01:55:19 +0000 (10:55 +0900)]
Change as do not set CONTENT_FORMAT OPT when server response without payload.
On current impl server add CONTENT_FORMAT OPT when response to client, if CONTENT_FORMAT setted on client request.
even payload is not exist on server response.
So, change it as check payload is exist on response before put CONTENT_FORMAT.
Reported-by: byonggon chun
Change-Id: Iced9952adb55304440089c32d658359a67f1dcd5
Signed-off-by: bg.chun <bg.chun@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9233
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jaewook Jung <jw0213.jung@samsung.com>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
hyuna0213.jo [Wed, 13 Jul 2016 01:17:23 +0000 (10:17 +0900)]
fixed pthread build issue on linux platform
resolved the build issue caused by merge of
https://gerrit.iotivity.org/gerrit/#/c/249/
Change-Id: I4936c07340658d455491f9e90d66b734e9a59e97
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9347
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
vimala.v [Wed, 13 Jul 2016 06:21:09 +0000 (11:51 +0530)]
[JIRA 1190] Added null checks in Tizen BLE adapter
Change-Id: Id1f81a1220af86cf2fab015530246e3485a0cb6d
Signed-off-by: vimala.v <vimala.v@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9349
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
David Antler [Mon, 11 Jul 2016 23:39:45 +0000 (16:39 -0700)]
Remove all free'd sessions from retransmission
Change-Id: Ibeec77ccfab5200aa3787d29e1320ad22c654568
Signed-off-by: David Antler <david.a.antler@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9297
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Dave Thaler <dthaler@microsoft.com>
Reviewed-by: Dmitriy Zhuravlev <d.zhuravlev@samsung.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
KIM JungYong [Mon, 11 Jul 2016 07:08:23 +0000 (16:08 +0900)]
Updated NSProvider structure for multi connections.
NSProvider can have a only UDP connection information.
But cloud notification service scenraio need to multiple connection informations.
So NSProvider struct is updated for multi connection information.
NSProviderConnectionInfo is added at NSProvider.
NAProviderConnectionInfo is list of Provider connection infomation.
Mutex is added at NSInvokeRequest().
Change-Id: Ie83527e264f93a2f5839417a61997fcdcf541a87
Signed-off-by: KIM JungYong <jyong2.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9275
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Tested-by: Uze Choi <uzchoi@samsung.com>
Habib Virji [Tue, 12 Jul 2016 11:11:12 +0000 (12:11 +0100)]
Fix GET ocresource response for /oic/d
If an application does not set oic.wk.d, set in savedDeviceInfo to get proper response for GET message.
Change-Id: I028b821ffe29b467d0ecc2add9a7a6ebfff5e72d
Signed-off-by: Habib Virji <habib.virji@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9309
Reviewed-by: Phil Coval <philippe.coval@osg.samsung.com>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Dwarkaprasad Dayama <dwarka.dayama@samsung.com>
Reviewed-by: Mushfiqul Islam <i.mushfiq@samsung.com>
hyuna0213.jo [Thu, 7 Jul 2016 09:28:35 +0000 (18:28 +0900)]
Changed CAConnectionStateChangedCB param to take endpoint info.
CAConnectionStateChangedCB parameter was changed from adapter,
address to CAEndpoint_t.
Change-Id: Ia4e31ad848c9eddd38b4788295841c908c65dda6
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9209
Reviewed-by: jihwan seo <jihwan.seo@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Philippe Coval [Sat, 9 Jul 2016 17:31:09 +0000 (19:31 +0200)]
Build: add gtest libs automatically
Once gtest's sconfile is imported, build flags are propagated.
Deeper cleanup and effort to make tests less linux specific
by avoiding to add gtest's pthread dependencies
in sub scons files.
Bug: https://jira.iotivity.org/browse/IOT-863
Bug-AGL: https://jira.automotivelinux.org/browse/SPEC-158
Change-Id: I4ddbf3e1eef8648ceaeae6c62175308cb6f3fec1
Origin: https://github.com/tizenteam/iotivity/
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/249
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: David Antler <david.a.antler@intel.com>
Reviewed-by: Dave Thaler <dthaler@microsoft.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Jaehong Jo [Fri, 8 Jul 2016 06:31:56 +0000 (15:31 +0900)]
Changed Tizen 2.4 gatt API
int bt_gatt_server_notify(bt_gatt_h characteristic, bool need_confirm,
bt_gatt_server_notification_sent_cb callback, void *user_data);
Change-Id: I911475002d907efee06b0a6b40144047a49793d9
Signed-off-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9243
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: jihwan seo <jihwan.seo@samsung.com>
Reviewed-by: Abhishek Sharma <ce.abhishek@samsung.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
David Antler [Thu, 7 Jul 2016 23:13:59 +0000 (16:13 -0700)]
Fix data alignment issue in tinydtls session_t
Detected a data alignment bug on Windows. The offset of the .addr union
is different in session_t vs stCADtlsAddrInfo_t. With this fix,
SimpleServer should not crash when built in secured mode. Without this
fix, an exception will occur in dtls_security_params_epoch().
Verified structure accuracy on VS2015 using cdb.exe. Prior to this patch,
session_t.addr was at +4 and stCADtlsAddrInfo_t.addr was at +8.
Change-Id: I07439b19fe08474dbf0d46a315dfd5b7355c1bdc
Signed-off-by: David Antler <david.a.antler@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9227
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
hyuna0213.jo [Fri, 1 Jul 2016 06:03:08 +0000 (15:03 +0900)]
Implement missing unit tests for ulinklist
Added unit test cases for ulinklist api
Change-Id: I06a0c4ed55c840e049c04dfdde20e7c9fd70b861
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9065
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
jihwan.seo [Tue, 31 May 2016 10:45:21 +0000 (19:45 +0900)]
added error callback listener in FindResource for Android
Change-Id: Ib55a77d29e52fb6a73ffc459f1c28f8dae184dfb
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8249
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Hyuna Jo <hyuna0213.jo@samsung.com>
Reviewed-by: Tim Kourt <tim.a.kourt@intel.com>
Reviewed-by: MyeongGi Jeong <myeong.jeong@samsung.com>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
jihwan.seo [Mon, 11 Jul 2016 07:31:28 +0000 (16:31 +0900)]
replaced comments related connectivity type with new comments
OC_WIFI, OC_ETHERNET, OC_ALL is previous param.
and so many people is confusing to set the param.
Change-Id: I59038fff753e8d9e47778eb928cdd01ee77cb466
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9277
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
jihwan.seo [Thu, 30 Jun 2016 06:14:09 +0000 (15:14 +0900)]
removed to set discoveralbe mode related BR/EDR in BLE monitoring.
bt_adapter_set_visibility() is only for BR/EDR.
it is not related to BLE.
Change-Id: Iaa29052341aa4f0e840a8f8ca7f6cc6d6673996d
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9045
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Philippe Coval [Fri, 22 Jan 2016 15:37:04 +0000 (16:37 +0100)]
OICSensorBoard: install example and improve configuration
Origin: https://gerrit.iotivity.org/gerrit/#/c/4743/
Change-Id: I7b434e45226d78dc4b69a8b9296b6d9d77d89189
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/5365
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-by: Mats Wichmann <mats@osg.samsung.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Philippe Coval [Fri, 8 Jul 2016 10:42:34 +0000 (12:42 +0200)]
Build: Add thread.scons to propagate pthread if needed
Bug: https://jira.iotivity.org/browse/IOT-863
Bug-AGL: https://jira.automotivelinux.org/browse/SPEC-158
Change-Id: I9dc39c758607df6f54910aa233a7401c1be2390f
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9253
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Philippe Coval [Sat, 2 Jul 2016 00:33:47 +0000 (02:33 +0200)]
Build: reworked unit tests to use gtest in a more generic way
The benefit of this change is to keep most gtest related configuration
in a single file and avoid to duplicate paths in sub sconfiles.
For portability concern "os.path.join" is preferred
to appending unix paths.
Some libs are reordered and some cleanup was done.
Let's also remove hardcoded pathes, as there is not guarantee
that the files will remain at the same place in all configurations.
Problem was observed when crossbuilding with Yocto distro
with security checks enabled (LfAgl).
More refactoring and deeper cleanup might come in later patch.
Change-Id: Ia13ee8c03f65f3407e88ff21d51b292261c9f2a3
Bug: https://jira.iotivity.org/browse/IOT-863
Bug-AGL: https://jira.automotivelinux.org/browse/SPEC-158
Origin: https://github.com/tizenteam/iotivity/
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8127
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: David Antler <david.a.antler@intel.com>
Reviewed-by: Dave Thaler <dthaler@microsoft.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Philippe Coval [Tue, 7 Jun 2016 21:44:28 +0000 (23:44 +0200)]
Build: set verbose output for scons
Can be tuned from user's shell with scon VERBOSE env variable.
Bug: https://jira.iotivity.org/browse/IOT-863
Bug-AGL: https://jira.automotivelinux.org/browse/SPEC-158
Change-Id: Ide8235c24ca54c53b57c7a54b716dc28b2425c08
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8545
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
KIM JungYong [Fri, 8 Jul 2016 01:19:20 +0000 (10:19 +0900)]
Added logic for discovering Provider in TCP transport
Before: Consumer tries to discovers provider in UDP transport,
when connection changed Event is called thru CAUtil.
After: discover provider in TCP transport also for the same event
- This is independent from initial discovery by service start
# Some compile warnings printed are resolved
# Some string defines for cloud TCP
Change-Id: Ic183ce90aaa1146f6c5910c6040280c370a0d40c
Signed-off-by: KIM JungYong <jyong2.kim@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9229
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Tested-by: Uze Choi <uzchoi@samsung.com>
YounghyunJoo [Thu, 7 Jul 2016 06:36:28 +0000 (15:36 +0900)]
Modify Consumer Logic
- Modify data type for message ID & message TTL (uint64_t: %llu->%lld).
- Rename NSConsumerQueueScheduler file name to NSConsumerScheduler.
- Modify NSConsumerScheduler to process sync type command for GetProvider.
- Add APIs to get message/provider
Change-Id: Ie40166fd6674bad162df9ead064a70b7e696ef13
Signed-off-by: YounghyunJoo <yh_.joo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9193
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Tested-by: Uze Choi <uzchoi@samsung.com>
uzchoi [Mon, 11 Jul 2016 02:39:29 +0000 (11:39 +0900)]
Merge branch 'master' into notification-service
Change-Id: I968cfa282e3ef1e3132ea0fbe93a7098115c7193
Signed-off-by: uzchoi <uzchoi@samsung.com>
Philippe Coval [Mon, 4 Jul 2016 11:58:15 +0000 (13:58 +0200)]
Build: disable shared library of gtest as suggested
As suggested by Jon A. Cruz "
"GTest in general is more focused away from the shared.
System-wide pre-compiled shared libs were deprecated a while back.
Sets of programs built at the same time *might* be OK
with a local shared version,
but static linkage makes it safer."
So this patch explicitly disable dynamic library of gtest,
it can be reverted on trouble as there is no "hard requirement" for it.
For the record, I came to this once I noticed
that using default shared library
caused troubles on some Yocto distros (LfAgl) :
relocation R_X86_64_PC32 \
against undefined hidden symbol
`__init_array_start'
can not be used ...
I suspect this problem is not related to gtest or iotivity.
Bug: https://jira.iotivity.org/browse/IOT-863
Bug-AGL: https://jira.automotivelinux.org/browse/SPEC-158
Change-Id: I9e4798aa3a579020255e8f53a8da8926dc4dee4f
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9147
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Philippe Coval [Mon, 19 Jan 2015 15:01:37 +0000 (16:01 +0100)]
packaging: gbs: use git tags from upstream
Change-Id: I3875e3761e982dd0d7af7ad8c40f37ff610e4857
Signed-off-by: Philippe Coval <philippe.coval@open.eurogiciel.org>
Reviewed-on: https://gerrit.iotivity.org/gerrit/248
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Mats Wichmann <mats@osg.samsung.com>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Philippe Coval [Fri, 1 Jul 2016 21:45:20 +0000 (23:45 +0200)]
tizen: Bump to 1.1.1
Change-Id: I0a5a0ba9c8d1f82af01e7ed9bae54209af67e582
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9093
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Mats Wichmann <mats@osg.samsung.com>
Reviewed-by: Habib Virji <habib.virji@samsung.com>
Reviewed-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Joseph Morrow [Sat, 2 Jul 2016 23:33:39 +0000 (16:33 -0700)]
Fixed issue where "oic.wk.d" was removed from array of device types.
Change-Id: I54ee75be4e7bbb9ce4de2b656dabff4c6386d58f
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9107
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Ziran Sun [Tue, 5 Jul 2016 15:17:30 +0000 (16:17 +0100)]
For some reason, changes in ocserverrequest.c in
https://gerrit.iotivity.org/gerrit/#/c/8815/
was not picked up when merging. This patch added
the missed line back in.
JIRA issue: https://jira.iotivity.org/browse/IOT-1122
Change-Id: I3ac7bf447a66971e7ae05eade5a18d8afc344137
Signed-off-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9183
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Phil Coval <philippe.coval@osg.samsung.com>
Reviewed-by: Habib Virji <habib.virji@samsung.com>
Jaehong Jo [Thu, 7 Jul 2016 12:47:53 +0000 (21:47 +0900)]
[IOT-1185] Add OCResultToSuccess to ensure success.
If just check only OC_STACK_OK, it can cause problems.
Below value is success like OC_STACK_OK.
OC_STACK_RESOURCE_CREATED,
OC_STACK_RESOURCE_DELETED,
OC_STACK_CONTINUE.
BUG : https://jira.iotivity.org/browse/IOT-1185
Change-Id: I60b369138df00b98c4dbeb952ffba140aa902b27
Signed-off-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9217
Reviewed-by: Hyuna Jo <hyuna0213.jo@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Chul Lee [Thu, 7 Jul 2016 14:52:52 +0000 (23:52 +0900)]
Change the name of dpc property of doxm to the vendor-defined name
Apply a patch to change the name of "dpc" property of doxm resouce to "x.com.samsung.dpc" as the vendor-defined name.
Patch #1: Initial patch
Patch #2: Fix unittest on CredResource in windows machine
Patch #3: Rebase and fix minor bugs.
Patch #4: Fix minor bug in unittest.
Patch #5: Remove the printf().
Change-Id: I8c9dd0483e090ceb00ed3d7208d9ca1f3897e432
Signed-off-by: Joonghwan Lee <jh05.lee@samsung.com>
Signed-off-by: Chul Lee <chuls.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9197
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Hauke Mehrtens [Mon, 4 Jul 2016 16:51:44 +0000 (18:51 +0200)]
update version number to 1.1.1
The next release is version 1.1.1, change the version number.
Change-Id: I0e74f5a919574c0f9730eb623117a548e8ffcd53
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9153
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Rahul Rahul <rahul.rahul@intel.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
leechul [Fri, 20 May 2016 00:41:00 +0000 (09:41 +0900)]
Update ACL data-structure based on RAML spec.
1. Change the OicSecAcl_t according to RAML spec
2. Add OicSecAce_t according to RAML spec
3. Update ACL realted modules(PolicyEngine, DirectPairing, json2cbor)
4. Update unit-test and samples
[Patch 13] Retrigger
[Patch 14] Update 'if' and 'rt' property as array according to core spec.
* Security RAML spec should be updated.
[Patch 15-16] Remove the compile error for arduino.
[Patch 17-18] Remove the cimpile error for arduino and windows.
[Patch 19] Update missed SVR DB.
Change-Id: I7a213ff0843020324a408dd1ceded31b01affa54
Signed-off-by: leechul <chuls.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8241
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
js126.lee [Tue, 5 Jul 2016 08:04:46 +0000 (17:04 +0900)]
[IOT-1179] Adding rt and if into response of Get request to doxm and pstat
Issue: Response of GET request to /oic/sec/doxm resource has problem(no "rt" and "if" property)
Per the core spec, every Resource shall have both rt and if.
Solution : Adding rt and if into response payload of Get request to doxm and pstat
Patch1,2 : Apply patch
Patch 3,4,5: Apply dongik's review
Change-Id: I6f9ad75194f9baa6c9dda25f742e38b790cd6cb7
Signed-off-by: js126.lee <js126.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9167
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
jaesick.shin [Mon, 4 Jul 2016 04:52:50 +0000 (13:52 +0900)]
service is terminated when repeated starts and stops.
The reason for this issue is due to deallocate the
variables that are created as char array when the nsstopprovider operating.
so, that bug is fixed.
Change-Id: I6d8fc5ca9f719b8236f9660376604ed41a04ef81
Signed-off-by: jaesick.shin <jaesick.shin@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9139
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Philippe Coval [Tue, 5 Jul 2016 16:46:08 +0000 (18:46 +0200)]
Build: Bump version to 1.1.1
To generate correct iotivity.pc
Bug: https://jira.iotivity.org/browse/IOT-1117
Change-Id: I9e671c151044c3336edc576b2ee5f093872c2027
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9187
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Hauke Mehrtens [Fri, 15 Jan 2016 23:03:24 +0000 (00:03 +0100)]
zigbee_wrapper: fix format string
use correct type for variable called result.
Change-Id: I9029b4150f9b5cab3cb2d41a50314c5747f45a39
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-on: https://gerrit.iotivity.org/gerrit/4897
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Dave Thaler <dthaler@microsoft.com>
Reviewed-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
hyuna0213.jo [Mon, 4 Jul 2016 04:54:32 +0000 (13:54 +0900)]
Fix tcp adapter build issue related to CAEndpoint_t
resolved the build issue caused by merge of
https://gerrit.iotivity.org/gerrit/#/c/8441/
Change-Id: If0caf9d116440025c60ae6ee019890947ceebe3d
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9113
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: jihwan seo <jihwan.seo@samsung.com>
Reviewed-by: David Antler <david.a.antler@intel.com>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
Todd Malsbary [Tue, 21 Jun 2016 17:03:52 +0000 (10:03 -0700)]
[IOT-1152] Clear static global data in OCStop.
This prevents subsequent calls to OCInit or OCStop from referencing
freed memory.
Change-Id: I9a20b72582920b5767c7617680b3b665093576b0
Signed-off-by: Todd Malsbary <todd.malsbary@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8819
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
js126.lee [Tue, 5 Jul 2016 06:10:18 +0000 (15:10 +0900)]
Change request method to POST on updating cred in OTM
the issue is that the /cred resource will actually exist, just will have no creds in it (empty array).
So this is really an UPDATE, to update the "creds" property of the oic.r.cred resource.
Once CTT has changed to POST on OTM, OC_REST_PUT case will be removed in CredEntityHandler
Patch1: apply patch
Patch2: Add comment
Change-Id: Iaa4b7d72e5855575be1f91b48997ee445941df03
Signed-off-by: js126.lee <js126.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9161
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Nathan Heldt-Sheller <nathan.heldt-sheller@intel.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Habib Virji [Fri, 1 Jul 2016 14:09:57 +0000 (15:09 +0100)]
[IOT-986] Not send response to multicast message for resource not existing
The resource not existing, it should not return any response for multicast packet.
There was no check for multicast request, this has been added and it does not send
any response.
Also add OC_MULTICAST type in octypes.h.
octypes.h transport flag should correspond to flags set in the CA layer. In the CA
layer (1 << 7), 7 bit is set for Multicast. In the RI layer, the type were differing,
hence was not possible to check if it is multicast packet. Please note the OC_RESERVED1
was not used anywhere and was wrong, it should match the transport flag of the CA layer.
BUG: http://jira.iotivity.org/browse/IOT-1126,
http://jira.iotivity.org/browse/IOT-1107,
http://jira.iotivity.org/browse/IOT-986
Change-Id: Ia8a7d1bdacf4e9a8a8d6cb21c49ad830cce7c3cc
Signed-off-by: Habib Virji <habib.virji@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9073
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Mushfiqul Islam <i.mushfiq@samsung.com>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Chul Lee [Wed, 22 Jun 2016 12:19:17 +0000 (21:19 +0900)]
Disable OC_SECURE flag in case of SECURED=0 build.
Change-Id: I53b8a05fc1bc84ea9b32bd8c5c312616b7c3f5c6
Signed-off-by: Chul Lee <chuls.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8875
Reviewed-by: Ashwini Kumar <k.ashwini@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Phil Coval <philippe.coval@osg.samsung.com>
Reviewed-by: dongik Lee <dongik.lee@samsung.com>
Reviewed-by: Rick Bell <richard.s.bell@intel.com>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
YounghyunJoo [Tue, 5 Jul 2016 06:12:36 +0000 (15:12 +0900)]
Modify Consumer Logic
- Modify name of the internal member values (ex> _addr->i_addr).
- Modify data type for message ID & message TTL (uint64_t: %ld->%llu).
- Modify storage(NSMessage/NSProvider) logic
- Remove unnecessary task logic (TASK_RECV_READ/TASK_RECV_DISMISS).
- Remove unnecessary comments & Modify typo
. patch#1: initial commit
. patch#2: modify typo
. patch#3: remove tab
. patch#4: update review comment
Change-Id: Iedafc2c6f605656d38b5e5354f1d57b6827566ca
Signed-off-by: YounghyunJoo <yh_.joo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9117
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Chul Lee [Thu, 23 Jun 2016 00:56:49 +0000 (09:56 +0900)]
Prevent the duplicate PIN output in case of retransmission message.
[Patch #1] Initial upload.
Change-Id: I3f69865a5fccaef9775d0200c0afaa7ce7247c20
Signed-off-by: Chul Lee <chuls.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8897
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: dongik Lee <dongik.lee@samsung.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
jihwan.seo [Thu, 23 Jun 2016 05:14:00 +0000 (14:14 +0900)]
replaced previous coap header for BT with 'coap+gatt' and 'coap+rfcomm'
Change-Id: Ic78a27f34d2cc967344c5d7baae76f9a6415942e
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8911
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Hyuna Jo <hyuna0213.jo@samsung.com>
Reviewed-by: Jaehong Jo <jaehong.jo@samsung.com>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
Kyungsun Cho [Mon, 4 Jul 2016 08:34:08 +0000 (17:34 +0900)]
Fixed the missed returned_length on |credresource|
Change-Id: I7098520a88c224f62c711917f3db1b139be064bf
Signed-off-by: Kyungsun Cho <goodsun.cho@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9127
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jongsung Lee <js126.lee@samsung.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Philippe Coval [Fri, 1 Jul 2016 20:58:37 +0000 (22:58 +0200)]
ocpayload: in DMV remove undesired trailing separator
Also add more tests cases too.
Suggestion for improvements:
Note the test uses a different message container to prevent ambiguity:
same one could be used but accessed at next indice
because MessageContainer::setPayload
actually adds given payload to internal list.
It would makes sense to rename method to MessageContainer::addPayload
and eventually add a new different method like :
MessageContainer::set(Payload) to reset list.
Bug: https://jira.iotivity.org/browse/IOT-1174
Change-Id: I9e7bf3c9eb7a311214e438ec2434d53b4ae0f313
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9069
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Joseph Morrow [Sat, 2 Jul 2016 23:17:51 +0000 (16:17 -0700)]
Fix issue where double array was not fetched from CBOR correctly.
Change-Id: I7d7f9ac4fe216d883ddb26d624136d098a8a7a14
Signed-off-by: Joseph Morrow <joseph.l.morrow@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9101
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Mandeep Shetty <mandeep.shetty@intel.com>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-by: Habib Virji <habib.virji@samsung.com>
David Antler [Fri, 1 Jul 2016 21:28:42 +0000 (14:28 -0700)]
Merge branch 'windows-port'
Add support for Visual Studio 2015 and 2013 builds.
Change-Id: I3ce9bee6b3e57ccd548b849b5d147ca0babd872e
Signed-off-by: David Antler <david.a.antler@intel.com>
David Antler [Tue, 28 Jun 2016 21:50:16 +0000 (14:50 -0700)]
Prepare for merge. Improved consistency and style.
* Reformat Windows SConscript to use spaces and add TODO
* Add TODO about most critical warnings to re-enable
* Fix unassigned declarations, use designated initializer when possible
* Fix various spacing and doxygen issues
* Improve consistency of macro definitions in platform_features.h
* Include failure codes on assert conditions for win_sleep.c
Change-Id: I0e88cf2a3fa0ed6e2f8822a6ce0b606a9070af64
Signed-off-by: David Antler <david.a.antler@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9041
Reviewed-by: Daniel Jay Ferguson <daniel.j.ferguson@intel.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Kyungsun Cho [Fri, 1 Jul 2016 04:49:55 +0000 (13:49 +0900)]
Fixed svase-warnings for iotivity-product's SQA on |credresource|
Change-Id: I48452b2b0e634d2d7b6cf7643ba9a27ede4877e5
Signed-off-by: Kyungsun Cho <goodsun.cho@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9061
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Inga Stotland [Wed, 29 Jun 2016 06:15:33 +0000 (23:15 -0700)]
[IOT-1133] Fix size setting for CA URI buffer
Use common define CA_MAX_URI_SIZE instead of hardcoded magic number
Change-Id: I61f6f39d1646166be92775e25419c1749f946c76
Signed-off-by: Inga Stotland <inga.stotland@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9019
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Rick Bell <richard.s.bell@intel.com>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
Jongmin Choi [Fri, 24 Jun 2016 09:33:22 +0000 (18:33 +0900)]
Fixed Security Resource Flags and Interface
OCResourceProperty Fixed for Following Security Resources
- doxm: OC_OBSERVABLE Removed
- cred, pstat: changed from OC_RES_PROP_NONE to OC_SECURE
Patch #2: OC_DISCOVERVABLE added to pstat
Patch #4: oic.mi.def removed
Change-Id: I35978a242636754977724045780af0082562b525
Signed-off-by: Jongmin Choi <jminl.choi@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8951
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jongsung Lee <js126.lee@samsung.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
David Antler [Tue, 21 Jun 2016 18:52:52 +0000 (11:52 -0700)]
Download boost automatically on Windows
Change-Id: I5782b99f3a84898e5da71de94f19f9b9c7eabb0a
Signed-off-by: David Antler <david.a.antler@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8821
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Dave Thaler <dthaler@microsoft.com>
George Nash [Mon, 27 Jun 2016 16:56:01 +0000 (09:56 -0700)]
Clean up compiler warnings
ocresource.c: (-Wunused-variable)
Fix the waring by moving the tcport inside the #ifdef
amsmgr.c (-Wunused-variable)
b64Ret, outLen, and base64Buff were all local variables that were
unused. They are removed since they are unused.
amaclresource.c (-Wunused-function)
OicSecAmaclCount function is unused anywhere. Since it is unused
it is not being maintained so it was removed.
Change-Id: Ia0327aec1feb484f084b2ce0d6608738ef5f6ad9
Signed-off-by: George Nash <george.nash@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8969
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Habib Virji <habib.virji@samsung.com>
Chul Lee [Wed, 22 Jun 2016 03:40:21 +0000 (12:40 +0900)]
Remove the endianness dependency in cbor conversion.
A similar bug reported from https://gerrit.iotivity.org/gerrit/#/c/8755/
Change-Id: I631bab77f7486f1f45eaff96c67d39606e37c6b6
Signed-off-by: Chul Lee <chuls.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8829
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Vinay Bhatia [Wed, 29 Jun 2016 12:41:07 +0000 (18:11 +0530)]
Svace Defects Fixes.
Removed Tab and extra space.
Fixed Remaining Defects.
Fixed Defect in provisioning/unittest/otmunittest.cpp
Change-Id: I1d163b1a39fe858323c5c799f9e26ba6a1a3f620
Signed-off-by: Vinay Bhatia <vinay.bhatia@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9031
Reviewed-by: Jongsung Lee <js126.lee@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
i.pazderskyy [Wed, 29 Jun 2016 11:25:41 +0000 (14:25 +0300)]
Fixed SVACE report defects.
Change-Id: I90bef9beb9619b1fba1ce03f96a6873d6fc31594
Signed-off-by: i.pazderskyy <i.pazderskyy@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9029
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jongsung Lee <js126.lee@samsung.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
jihwan.seo [Wed, 29 Jun 2016 02:24:55 +0000 (11:24 +0900)]
modified coding style for parenthesis for Android JNI
and some variable is declared with initial value
Change-Id: I44977ced60dfd2f15f162e5beac0461840f72ef6
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/9011
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
Ziran Sun [Tue, 21 Jun 2016 13:30:35 +0000 (14:30 +0100)]
Change observe option header behaviour to be in line with spec
at the following points:
1. If the resource can't register the client as observer,
or the resource does not support observe, then the resource
sends back normal GET Response with NO observe option field.
2. Upon successfully removing the client from observer list,
the resource sends back a normal GET response with NO observe
option field
3. This patch also reverted https://gerrit.iotivity.org/gerrit/#/c/8901/
after discussed with the author to be inline with spec.
JIRA issue: https://jira.iotivity.org/browse/IOT-1122
Change-Id: I36510baa69a8ef3be9e0d9aef3fbd40d31488b0f
Signed-off-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8815
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Mushfiqul Islam <i.mushfiq@samsung.com>
Philippe Coval [Mon, 27 Jun 2016 21:33:40 +0000 (23:33 +0200)]
ocpayload: Set default DMV values and only use comma as delim
For IoTivity-1.1.1: "res.1.1.0,sh.1.1.0" are used
as default Data Model Versions.
Now only use ',' as CSV separator (so ';' must be avoided).
This change has been tested on Debian jessie
and can be squashed into :
https://gerrit.iotivity.org/gerrit/#/c/8707/
Bug: https://jira.iotivity.org/browse/IOT-1101
Change-Id: I8e79776a8fc6c6112db9d5a9ab9a2008e9ea426e
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8973
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
jihwan.seo [Tue, 28 Jun 2016 08:01:21 +0000 (17:01 +0900)]
removed build warning for android
- removed unused method
- removed 'write to static field' warning
Change-Id: I1964dbae99b01c62a739cca34de57304ac79a434
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8985
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
hyuna0213.jo [Tue, 28 Jun 2016 09:05:11 +0000 (18:05 +0900)]
remove build warning for linux
- remove unused parameter
- remove 'implicit declaration of function' warning
- adjusted code style
Change-Id: If1a2bb525f293e2425122019bcf42199cd6c40c3
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8989
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
Habib Virji [Tue, 28 Jun 2016 10:09:09 +0000 (11:09 +0100)]
Jira Issue-964: Add more types for OCEntityHandlerResult
OCEntityHandlerResult includes more type that matches with
CAResponseResult_t.
This patch does not modify the return value of the exisitng code
and neither changes the enum value of the existing code.
It appends to the existing list based on the CoAP return values.
Change-Id: I2be12bb5f80ab751c9afc4e89c48446479c8f565
Signed-off-by: Habib Virji <habib.virji@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8991
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Phil Coval <philippe.coval@osg.samsung.com>
Reviewed-by: Dwarkaprasad Dayama <dwarka.dayama@samsung.com>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Jongmin Choi [Tue, 28 Jun 2016 08:02:20 +0000 (17:02 +0900)]
Fixed policy response in /oic/res discovery
Added "sec": false to response in case of unsecure resource
Removed "port" information in case of unsecure resource
This patch is based on the Core Spec CR on resource policy.
If "sec" is false, it may or may not be included in /oic/res discovery response.
If "sec" is false, "port" shall be omitted in the response.
This patch should be used together with
Disable OC_SECURE flag in case of SECURED=0 build patch
(https://gerrit.iotivity.org/gerrit/#/c/8875/)
Change-Id: I8e0f3b39896c8856ab659f966e1227196e0f2153
Signed-off-by: Jongmin Choi <jminl.choi@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8987
Reviewed-by: Habib Virji <habib.virji@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Gregg Reynolds [Mon, 6 Jun 2016 05:58:31 +0000 (00:58 -0500)]
fix warning test cond always true by removing unnecessary test
Change-Id: I4753c69049295379f85641638b3ece4ca09da5c1
Signed-off-by: Gregg Reynolds <reynolds-gregg@norc.org>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8479
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
hyuna0213.jo [Thu, 23 Jun 2016 00:10:34 +0000 (09:10 +0900)]
[JIRA-1151] IoTivity Blockwise transfer is sort of broken when
paired with slow response
- When a resource is set as slow response resource,
and it has a large enough payload to be sent as blockwise
transfer data, and a CON retrieve message is sent to the resource,
the coap messaging mechanism break down.
- Remove the unnecessary code
Change-Id: I4bfabc4f457f637a8a88e6c237c25831c7b6c776
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8895
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Mushfiqul Islam <i.mushfiq@samsung.com>
Reviewed-by: jihwan seo <jihwan.seo@samsung.com>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
YounghyunJoo [Wed, 22 Jun 2016 10:25:13 +0000 (19:25 +0900)]
Update Logic to manage Provider list.
- Add storage to store Provider List & Logic to manage Provider List
- Modify type of Message format in consumer to NSSyncType(delete existing type(NSConsumerMessageTypes))
- Modify way to sending syncInfo to use providerId
- Modify to set providerId when send acceptance response in Provider.
Change-Id: Id667403c70c88e6bce16bc92a3ec6605e36e9dc5
Signed-off-by: YounghyunJoo <yh_.joo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8799
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Phil Coval [Thu, 16 Jun 2016 08:25:44 +0000 (10:25 +0200)]
ocpayload: Supports multiple data model versions (DMV) using CSV
DMV can be CVS if multiple values are supplied.
OIC 1.1 has a single value but future spec is expected to have multiple values
For more details about this specification please refer to:
20160531-OIC_Core_Specification_v1.1.0_r0.13.docx
Section 11.3.4,
Table 18 for property description
& Section D.3.4 for RAML definition.
For now it's supporting simple patterns like "one-1,two-2"
In the longer term a full implementation of rfc4180 might be desired.
Internally those items are stored in OCStringLL (linked list of strings),
and later it would make sense to relocate those helper functions
in a common place.
This change has been tested on Tizen:3.0:IVI
Bug: https://jira.iotivity.org/browse/IOT-1101
Change-Id: I7274d74ba525aedda49b78398743aa24a7999c00
Signed-off-by: Phil Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8707
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Uze Choi <uzchoi@samsung.com>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-by: Dwarkaprasad Dayama <dwarka.dayama@samsung.com>
vimala.v [Tue, 28 Jun 2016 10:24:34 +0000 (15:54 +0530)]
[Tizen] Resolved build warnings
Change-Id: Ic1fb1d3e5b12f3e9f7c548f7b00969ee19c1d00c
Signed-off-by: vimala.v <vimala.v@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8993
Reviewed-by: Abhishek Sharma <ce.abhishek@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
Philippe Coval [Thu, 23 Jun 2016 19:52:14 +0000 (21:52 +0200)]
tizen: Bump to 1.1.1
Change-Id: I4ba6addba481b3180f6ebb6969caf86115589c48
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8953
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Dwarkaprasad Dayama <dwarka.dayama@samsung.com>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
David Antler [Tue, 21 Jun 2016 22:23:06 +0000 (15:23 -0700)]
Use oic_time inside provisioning
Change-Id: I8f91e99f3a84898e5da71de94f19f9b9c7e82635
Signed-off-by: David Antler <david.a.antler@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8823
Reviewed-by: Dave Thaler <dthaler@microsoft.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
David Antler [Wed, 22 Jun 2016 20:09:58 +0000 (13:09 -0700)]
Remove references to 'winrt'
Change-Id: Iaa0cb9b830eeb040971023296c3b0c677d028d28
Signed-off-by: David Antler <david.a.antler@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8889
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Dave Thaler <dthaler@microsoft.com>
Philippe Coval [Sat, 12 Dec 2015 01:05:32 +0000 (01:05 +0000)]
tizen: also support ARMv7 machine
It was successfully tested on :
* Tizen:2.4:Mobile profile (TM1 and Samsung Z1)
* Tizen:2.3:Wearable profile (GearS)
Change-Id: I9e43f35ed2fa18e7dc691f1f5cbfa9a2e4830aad
Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/5363
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Reviewed-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
Ziran Sun [Thu, 23 Jun 2016 10:18:45 +0000 (11:18 +0100)]
Change resource type of /oic/res from string to array.
JIRA Issue: https://jira.iotivity.org/browse/IOT-1131
Change-Id: I91f77f806ed7feb290fea0aa1b12f76a3b119442
Signed-off-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8921
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Habib Virji <habib.virji@samsung.com>
Reviewed-by: Mushfiqul Islam <i.mushfiq@samsung.com>
Sandeep Sharma [Mon, 23 May 2016 09:33:33 +0000 (15:03 +0530)]
Implementation for Direct Pairing Android Interface API and Sample App.
1. Android Interface API's for direct Pairing feature.
2. Android Sample App for Direct Pairing.
[patch #2]
Commnts fixes.
Add Support for direct Pair provisioning in ProvsioningClient Android sample
app.
[Patch #3]
Build Fix.
[Patch #4]
Review comments addressed.
Change-Id: I09572eb8cb54f7cd122c6eb224ac2abbcb1ec530
Signed-off-by: Sandeep Sharma <sandeep.s9@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8281
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ashwini Kumar <k.ashwini@samsung.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
js126.lee [Wed, 22 Jun 2016 11:53:10 +0000 (20:53 +0900)]
Remove double checking type in credential data
Remove double checking type in credential data
Patch 1,2: Remove double checking type in credential data
Change-Id: Ibb532700dff39e1f4ef261de7dda15a48e782d61
Signed-off-by: js126.lee <js126.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8873
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
js126.lee [Fri, 24 Jun 2016 07:17:53 +0000 (16:17 +0900)]
Change CARemovePeer condition when DTLS is closed
In order to align with tinydtls, this patch have modified that
CARemovePeer is called in below condition.
(DTLS_ALERT_LEVEL_FATAL == level || DTLS_ALERT_CLOSE_NOTIFY == code)
Change-Id: Ia8c9d6294973416e01714dad35fe239907eba48c
Signed-off-by: js126.lee <js126.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8943
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Jongmin Choi [Thu, 23 Jun 2016 10:33:57 +0000 (19:33 +0900)]
Fixed Occlient app usage
Change-Id: Ia4614129602a4920ab19a59996833b8d66412ad9
Signed-off-by: Jongmin Choi <jminl.choi@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8923
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Gregg Reynolds [Mon, 6 Jun 2016 05:28:54 +0000 (00:28 -0500)]
fix inconsistency: WrapRequest decl'd class, def'd struct
Change-Id: I26809689a0f685318702c4f2881e31c0ff8da116
Signed-off-by: Gregg Reynolds <reynolds-gregg@norc.org>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8473
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
saurabh.s9 [Tue, 24 May 2016 12:17:38 +0000 (17:47 +0530)]
Added UTC to cover uncovered APIs and Corrected build issue in credentialgenerator.h
This patch is dependent upon https://gerrit.iotivity.org/gerrit/#/c/8813/
Change-Id: I49a9de85e04c47f0d9ebbfab99248cf58a998248
Signed-off-by: saurabh.s9 <saurabh.s9@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8305
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ashwini Kumar <k.ashwini@samsung.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
saurabh.s9 [Tue, 21 Jun 2016 06:49:25 +0000 (12:19 +0530)]
Check for NULL parameter
Change-Id: I27b316b11f0362deeaff2de8e06ffc296759411d
Signed-off-by: saurabh.s9 <saurabh.s9@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8813
Reviewed-by: Ashwini Kumar <k.ashwini@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Ziran Sun [Fri, 10 Jun 2016 14:22:18 +0000 (15:22 +0100)]
Added function that enables RI passing message ID from CA
layer to application layer. This allows application layer
to differentiate new messages and re-transmitted messages.
JIRA Issue: https://jira.iotivity.org/browse/IOT-1112
Change-Id: Iec7286586c81ae245dbb78a07707a2ea39875d18
Signed-off-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8595
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Mushfiqul Islam <i.mushfiq@samsung.com>
Ziran Sun [Wed, 1 Jun 2016 09:25:26 +0000 (10:25 +0100)]
Retrieve on /oic/res?rt=oic.d.xxx should return as per oic.if.ll
rather than returning as per oic.if.baseline.
This change set the default interface of /oic/res as oic.if.ll when
no interface is specified in the enquiry.
JIRA issue: https://jira.iotivity.org/browse/IOT-1103
Change-Id: I7694be578aec57b640ba6fdc84c4fec472fe92f5
Signed-off-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8415
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Mushfiqul Islam <i.mushfiq@samsung.com>
Ziran Sun [Tue, 21 Jun 2016 14:04:14 +0000 (15:04 +0100)]
Change rt type from string to array in sample code.
Change-Id: I45e41908cb44fe75617c16f5d2cba9ab976d623e
Signed-off-by: Ziran Sun <ziran.sun@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8817
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Phil Coval <philippe.coval@osg.samsung.com>
hyuna0213.jo [Wed, 22 Jun 2016 05:09:53 +0000 (14:09 +0900)]
Fix a wrong conditional statement about token value.
if the first byte of the token is 00, the condition will
return false even though the token is valid.
Change-Id: I7386cb3644f32e7d1cabb58a1ef8c7162cf19476
Signed-off-by: hyuna0213.jo <hyuna0213.jo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8831
Reviewed-by: jihwan seo <jihwan.seo@samsung.com>
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
jihwan.seo [Wed, 8 Jun 2016 04:04:41 +0000 (13:04 +0900)]
removed svace warning for android
- initialize some variables
- adjusted code style
- modified unreached code
Change-Id: Id0001f98d49b09131f4a4177400bdc6defa51a2f
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8551
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Jon A. Cruz <jon@joncruz.org>
js126.lee [Tue, 14 Jun 2016 05:40:31 +0000 (14:40 +0900)]
Modify GET request handler for /oic/sec/acl
Issue: If 'subject' field is not included in REST request,
a error occur on HandleACLGetRequest.
This implementation does not meet the spec, and causes the failure with CTT.
Resolution: A server responds for GET 'oic/sec/acl', even if 'subject' field
is not included in REST request.
Patch 1: Fixed this issue, and adding GetACL API for debugging only.
Patch 2: Rebase it on the latest master branch
Change-Id: Icb3869fee6039a076ee90146ae94eb527a88865c
Signed-off-by: js126.lee <js126.lee@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8633
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Chul Lee <chuls.lee@samsung.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
Hauke Mehrtens [Fri, 17 Jun 2016 15:38:35 +0000 (17:38 +0200)]
security: fix reading of permission attribute from configuration
Casting the pointer to the permission attribute from uint16_t to uint64_t
causes problems on MIPS Big Endian systems and probably othrs as well.
When the calling method interprets it as uint64_t not the value is
converted but the pointer is interpreted as it would point to a 64 bit
integer, but it is only a 16 bit wide integer. On MIPS BE permission was
always 0 independent of which value between 0 and 32 the permission
attribute had, this was probably written to some padding area or into
some other member of the struct.
This patch fixes the memory corruption and makes the code work for me with
a MIPS BE CPU.
Change-Id: Ifa843e69980ad4309b1e3076b8e2c98c03324352
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8755
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Chul Lee <chuls.lee@samsung.com>
Reviewed-by: Randeep Singh <randeep.s@samsung.com>
jihwan.seo [Wed, 8 Jun 2016 02:27:55 +0000 (11:27 +0900)]
removed unused parameter warning in resource-container
Change-Id: Id6bec0675e2c5776a3f0e9a6a8caab3ec696b4f6
Signed-off-by: jihwan.seo <jihwan.seo@samsung.com>
Reviewed-on: https://gerrit.iotivity.org/gerrit/8549
Tested-by: jenkins-iotivity <jenkins-iotivity@opendaylight.org>
Reviewed-by: Ashok Babu Channa <ashok.channa@samsung.com>
Reviewed-by: Madan Lanka <lanka.madan@samsung.com>