review.tizen.org Git - profile/wearable/platform/kernel/linux-3.18-exynos7270.git/log

drm/tgm: tbm: add get dma_buf interface.

This patch is from product kernel.

Change-Id: Id6c8221c75b2bd715968df8fdd49d4b86f26a599
Signed-off-by: Jin-young Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/tdm: implement msc driver to support PP.

MSC driver is included. This patch is from product kernel.

Change-Id: Ibe08ff732fb4e5cc9718b59254cd52f8716bad5b
Signed-off-by: Jin-young Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/tdm: implement PP interface.

PP interface is included. This patch is from product kernel.

Change-Id: I44d06ab017e2023440010ad64a4265e24954f0c2
Signed-off-by: Jin-young Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/tbm: add get/put dma address interface.

DMA address interface set for pp driver.
This patch is from product kernel.

Change-Id: I41ad97483fdd7f0e3c17fc216d04d47edca2f8b1
Signed-off-by: Jin-young Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/tgm: add sub driver handling interface.

It doesn't have the pp interface for the pp driver.
And this patch is from product kernel.

Change-Id: Iceb891e602fe6e6e246445b7d845927cc39a73c0
Signed-off-by: Jin-young Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/tgm: add pid information on gem_info

This patch is from product kernel.

Change-Id: Id408cab17ca339bb2d8c8af1193a7905f2a34869
Signed-off-by: Jin-young Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/tgm: tdm: change sequence to turn off vblank.

Prevent duplicated low power mode request.
This patch is from product kernel.

Change-Id: I729af7274ca491a84ec72790c8ca6bf67530ce5b
Signed-off-by: Jin-young Jeon <jy0.jeon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

packaging: Turn off building with ASan

Turn off ASan for ASan sanitized firmware build

Change-Id: If786306821ff22e994efaba2b00dcabcc5eb8426
Signed-off-by: Gonzha Dmitriy Evgenevich <d.gonzha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

packaging: install license for rpm package instead of license package

This patch replaces license rpm package to license file in rpm
package.

Change-Id: I8d06a0b42bce3e5d774151f2d708b081c1b46956
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

dma-buf: add support for compat ioctl

Add compat ioctl support to dma-buf. This lets one to use DMA_BUF_IOCTL_SYNC
ioctl from 32bit application on 64bit kernel. Data structures for both 32
and 64bit modes are same, so there is no need for additional translation
layer.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1487683261-2655-1-git-send-email-m.szyprowski@samsung.com
[Adjust commit-msg with commit in next tree]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: I902d06598ffa5a8985274185f6dc5b15ae119fcb

dma-buf: Add ioctls to allow userspace to flush

The userspace might need some sort of cache coherency management e.g. when CPU
and GPU domains are being accessed through dma-buf at the same time. To
circumvent this problem there are begin/end coherency markers, that forward
directly to existing dma-buf device drivers vfunc hooks. Userspace can make use
of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be
used like following:
     - mmap dma-buf fd
     - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
       to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
       want (with the new data being consumed by the GPU or say scanout device)
     - munmap once you don't need the buffer any more

v2 (Tiago): Fix header file type names (u64 -> __u64)
v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end
dma-buf functions. Check for overflows in start/length.
v4 (Tiago): use 2d regions for sync.
v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and
remove range information from struct dma_buf_sync.
v6 (Tiago): use __u64 structured padded flags instead enum. Adjust
documentation about the recommendation on using sync ioctls.
v7 (Tiago): Alex' nit on flags definition and being even more wording in the
doc about sync usage.
v9 (Tiago): remove useless is_dma_buf_file check. Fix sync.flags conditionals
and its mask order check. Add <linux/types.h> include in dma-buf.h.

Change-Id: Id20b5354ba481e2d896b08500e1323eedcb16e5b
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1455228291-29640-1-git-send-email-tiago.vignatti@intel.com
And below things are included,
- backport of mainline commit 831e9da7dc5c22fd2a5fb64e999f6e077a4338c3
- fix build errors incurred by argument mismatches of dma_buf_begin/end_cpu_access function calls in v4l2/mali/ion drivers.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

packaging: exported kernel-header based on armv7l

There were difference in kernel-headers between arch64 and armv7l
architecture. It need to be built and exported respectively. So, I
enabled building and made kernel-headers for armv7l.

Change-Id: Ia890e98a591f3474711313ab41800712717190f8
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

power: battery: sec-battery: Add support for disabling battery charge

The new attribute "disable_charge" will be added. If this attribute is
set to 1, battery charging completely stops within "discharging"
state, and it cannot resume until restoring the attribute as 0 or
rebooting the target.

Change-Id: I0638bf73ba89d72c34d1c338a411e6d4978060db
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>

packaging: exported kernel-header properly

Orginally, kernel-header which is based on 3.18.14 was exported.
We applied some patches on the kernel therefore it need to export
patched kernel-header again. Moreover, organized spec script properly
and removed unnecessary code.

Change-Id: I8935d9cc374a2551e57a4ba4f551c047abad2814
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

packaging: added execution authority to script files

GBS build would be failed sometimes because script file don't have
execution authority even though I already added execution permission
like this '755'. So, I added execute permisson forcibly while RPM is
executed.

Change-Id: Ie014c03575659c5f1bca18af8572c712251c38fd
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

packaging: removed '%post' script and unnecessary code

There are two rpms as a result such as aarch64 and armv7l. In case of
aarh64, It works well but %post script in armv7l arch won't run because
of baselibs. Therefore, I located dzImage in /boot/kernel/dzImage
directly.

Change-Id: Ibeb43d6db22f597b9ffad07d16b925516ea1950d
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

packaging: removed code associated with module build

It is not need to build kernel modules, we don't use it.

Change-Id: I534648cf110ae606187a75bca6e49bd9d954eb33
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

packaging: baselibs didn't work.

if i use the name of rpm packages included '.' or '_' like
'linux-3.18-tizen_tw2', it will be failed to make armv7l rpm packages.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

packaging: fixed baselibs contents.

added "+/" for making arm7l binary and changed rpm name.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

packaging: added 'ExclusiveArch:aarch64'

TW2 should be built to use aarch64.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

packaging: added baselibs.conf for building arm7l arch.

It also need to build kernel based on arm7l.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

packaging: fixed the permission error when execute "scripts/exynos_*.sh"

script files for dtb were created with 644 permission in the scratchbox even
though i already changed perm to 755. Therefore, build will be failed when
execute "exynos_dtbtool.sh" because it doesn't have 'x' permission.

I tried to touch these files again and it worked well. I suspect that first
patch couldn't apply the file attribute. That's why i made this meaningless
commit.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

packaging: removed useless BuildRequires.

Removed useless "BuildRequires" in the spec file such as gcc, lzop, python and
etc. It is possible to build kernel without these packages.

The reason why, kernel doesn't need to have dependencies these packages
associated with Tizen platform.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

arm64: defconfig: disable SWAP_DA config.

removed useless config.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

input: removed annoying input event logs.

Removed unnecessary logs when occuring hardkeys, touchscreen, rotary event.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

arm64: defconfig: changed defconfig name to tw2 from solis

Removed unnecessary defconfigs and changed defconfig name to tw2.

Change-Id: Ifa1e0f93a9104fcad264d2015343c9b1bdf637f6
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
[sw0312.kim: sync with .config]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

drm/tgm: tbm: implement prime import ops on gem_ion.

This patch implementes prime import for gem_ion.

Signed-off-by: Jin-young Jeon <jy0.jeon@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ion: add apis to get client property.

This patch adds APIs to get ion client property.

Change-Id: I642063422247fe6dc012a75fc4937637115b6358
Signed-off-by: Jin-young Jeon <jy0.jeon@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

power-supply: sync supply properties and type

This patch fixes to sync supply properties and their type to avoid
int type in string type position.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

battery: p9220: adjust log and log level for get_property

The get_property function prints not matched value with info level,
so this patch adjusts value name and change to debug level.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

video: exynos: Add DECON_STATE_INIT in the suspend function

DECON_STATE_INIT is not defined in the suspend function. So, it return while
booting tizen. Besides, added logs to check the device state.

Errors
dpm_run_callback(): pm_genpd_suspend+0x0/0x78 returns -16
PM: Device 14830000.decon_fb failed to suspend: error -16

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

power: Removed unnecessary logs during booting and idle state.

Changed levels of unnecessary log to debug from error and info.
Moreover, changed error code to ENODATA from EINVAL to avoid printing out
too much logs during idle state.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

packaging: Added '.gbs.conf' for partial build

Added gbs configuration file for enhanced building.
it makes gbs build faster than before.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
[sw0312.kim: sync package version with rebase kernel version]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: I19888ea5b2e753c387cac39c334fb6d7bc1bc98f

packaging: Made build scripts for GBS.

Build scripts were fixed to be worked on GBS environment based on gcc6.

Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

arm64: tizen_solis_defconfig: adjust smack options

This patch adjusts smack options to enable smack netfilter and
smack append signals.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

netfilter: nfnetlink_queue: add security context information

This patch adds an additional attribute when sending
packet information via netlink in netfilter_queue module.
It will send additional security context data, so that
userspace applications can verify this context against
their own security databases.

Signed-off-by: Roman Kubiak <r.kubiak@samsung.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Smack: secmark connections

If the secmark is available us it on connection as
well as packet delivery.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

Smack: Repair netfilter dependency

On 1/23/2015 8:20 AM, Jim Davis wrote:
> Building with the attached random configuration file,
>
> security/smack/smack_netfilter.c: In function ‘smack_ipv4_output’:
> security/smack/smack_netfilter.c:55:6: error: ‘struct sk_buff’ has no
> member named ‘secmark’
> skb->secmark = skp->smk_secid;
> ^
> make[2]: *** [security/smack/smack_netfilter.o] Error 1

The existing Makefile used the wrong configuration option to
determine if smack_netfilter should be built. This sets it right.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

Smack: secmark support for netfilter

Smack uses CIPSO to label internet packets and thus provide
for access control on delivery of packets. The netfilter facility
was not used to allow for Smack to work properly without netfilter
configuration. Smack does not need netfilter, however there are
cases where it would be handy.

As a side effect, the labeling of local IPv4 packets can be optimized
and the handling of local IPv6 packets is just all out better.

The best part is that the netfilter tools use "contexts" that
are just strings, and they work just as well for Smack as they
do for SELinux.

All of the conditional compilation for IPv6 was implemented
by Rafal Krypa <r.krypa@samsung.com>

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

Smack: ignore private inode for file functions

The access to fd from anon_inode is always failed because there is
no set xattr operations. So this patch fixes to ignore private
inode including anon_inode for file functions.

It was only ignored for smack_file_receive() to share dma-buf fd,
but dma-buf has other functions like ioctl and mmap.

Reference: https://lkml.org/lkml/2015/4/17/16

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

Smack: fix d_instantiate logic for sockfs and pipefs

Since 4b936885a (v2.6.32) all inodes on sockfs and pipefs are disconnected.
It caused filesystem specific code in smack_d_instantiate to be skipped,
because all inodes on those pseudo filesystems were treated as root inodes.
As a result all sockfs inodes had the Smack label set to floor.

In most cases access checks for sockets use socket_smack data so the inode
label is not important. But there are special cases that were broken.
One example would be calling fcntl with F_SETOWN command on a socket fd.

Now smack_d_instantiate expects all pipefs and sockfs inodes to be
disconnected and has the logic in appropriate place.

Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

Smack: Assign smack_known_web label for kernel thread's

Assign smack_known_web label for kernel thread's socket

Creating struct sock by sk_alloc function in various kernel subsystems
like bluetooth doesn't call smack_socket_post_create(). In such case,
received sock label is the floor('_') label and makes access deny.

Signed-off-by: jooseong lee <jooseong.lee@samsung.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>

Smack: Signal delivery as an append operation

Under a strict subject/object security policy delivering a
signal or delivering network IPC could be considered either
a write or an append operation. The original choice to make
both write operations leads to an issue where IPC delivery
is desired under policy, but delivery of signals is not.
This patch provides the option of making signal delivery
an append operation, allowing Smack rules that deny signal
delivery while allowing IPC. This was requested for Tizen.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

modem_if: remove not necessary comparison

The numerical comparison on boolean value causes build warning
with gcc 6, so this patch removes not necessary comparison.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

fix non proper indents for if clause

non proper indent for if clause causes build error with gcc 6. So
this patch fixes them.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

SWAP-DA: remove invalid semicolons on energy module

There are invalid semicolons after if clause on energy module and
it causes following build error with gcc 6, so this patch removes
the invalid semicolons.

  kernel/swap/energy/energy.c: In function 'calc_wifi_recv_energy':
  kernel/swap/energy/energy.c:640:2: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
    if (len <= 0 || check_wlan0(sock));
    ^~
  kernel/swap/energy/energy.c:641:3: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
     return;
     ^~~~~~
  kernel/swap/energy/energy.c: In function 'calc_wifi_send_energy':
  kernel/swap/energy/energy.c:653:2: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
    if (len <= 0 || check_wlan0(sock));
    ^~
  kernel/swap/energy/energy.c:654:3: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
     return;
     ^~~~~~

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

net: bcm4358: fix not to check same value in macro

When BCMBUSTYPE is not defined, then BUSTYPE(bustype) is just
bustype. So comparing bustype and BUSTYPE(bustype) is not necessary.

This patch removes following build warning with gcc 6.
   drivers/net/wireless/bcmdhd4358/siutils.c: In function 'si_doattach':
   drivers/net/wireless/bcmdhd4358/siutils.c:512:14: warning: self-comparison always evaluates to false [-Wtautological-compare]
     if (bustype != BUSTYPE(bustype)) {
                 ^~

Change-Id: I1cac3dd31bcb86983469830013a1093ed9ceaa89
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

trace: remove invalid semicolon after if clause

The commit 6f6f99a38132 ("trace: add non-hierarchical function_graph option"),
in https://android.googlesource.com/kernel/common.git/+/android-3.18,
added invalid semicolon after if clause, so it causes following
build error on gcc 6, so this patch removes the invalid seimicolon.

  kernel/trace/trace_output.c: In function 'trace_graph_ret_raw':
  kernel/trace/trace_output.c:976:2: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
    if (!trace_seq_printf(&iter->seq, "%lx %lld %lld %ld %d\n",
    ^~
  kernel/trace/trace_output.c:982:3: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
     return TRACE_TYPE_PARTIAL_LINE;
     ^~~~~~

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

build: add exynos system-tools script files

This patch adds exynos system-tools script files to make
merged dtb file and merged kernel file with dtbs.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

Imported code from product.

Change-Id: Ib32fd2379edc36fd7dd8adb5459009707dc0204a
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

switch ->setxattr() to passing dentry and inode separately

smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.

Similar change for ->getxattr() had been done in commit ce23e64. Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.

Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[sw0312.kim: backport to 3.18]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: Ic064260484c41010024cd04f154b392a182e3da0

switch xattr_handler->set() to passing dentry and inode separately

preparation for similar switch in ->setxattr() (see the next commit for
rationale).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[sw0312.kim: backport to 3.18 including ext3]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: I98d786b0c21fb761f180b564d7d4455c77cab3b9

security_d_instantiate(): move to the point prior to attaching dentry to inode

commit b96809173e94ea2fa8c19c2e40e8545a1821bf57 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[sw0312.kim: backport to 3.18]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: Ie05efa64cefc014c21ae1acfc44acf2c81b9950b

->getxattr(): pass dentry and inode as separate arguments

commit ce23e640133484eebc20ca7b7668388213e11327 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[sw0312.kim: backport to 3.18]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: Iddfbd0bebefe264e6f10c08ea0445b09daf99f3a

xattr_handler: pass dentry and inode as separate arguments of ->get()

commit b296821a7c42fa58baa17513b2b7b30ae66f3336 upstream.

... and do not assume they are already attached to each other

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[sw0312.kim: backport to 3.18 including ext3]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Change-Id: Ida4ef28f8c9abd23c28de20f15ad6d6b141d64e3

Linux 3.18.136

ax25: fix possible use-after-free

commit 63530aba7826a0f8e129874df9c4d264f9db3f9e upstream.

syzbot found that ax25 routes where not properly protected
against concurrent use [1].

In this particular report the bug happened while
copying ax25->digipeat.

Fix this problem by making sure we call ax25_get_route()
while ax25_route_lock is held, so that no modification
could happen while using the route.

The current two ax25_get_route() callers do not sleep,
so this change should be fine.

Once we do that, ax25_get_route() no longer needs to
grab a reference on the found route.

[1]
ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113
Read of size 66 at addr ffff888066641a80 by task syz-executor2/531

ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1db/0x2d0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x123/0x190 mm/kasan/generic.c:191
memcpy+0x24/0x50 mm/kasan/common.c:130
memcpy include/linux/string.h:352 [inline]
kmemdup+0x42/0x60 mm/util.c:113
kmemdup include/linux/string.h:425 [inline]
ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424
ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224
__sys_connect+0x357/0x490 net/socket.c:1664
__do_sys_connect net/socket.c:1675 [inline]
__se_sys_connect net/socket.c:1672 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1672
do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458099
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099
RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4
R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff

Allocated by task 526:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc mm/kasan/common.c:496 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
kmalloc include/linux/slab.h:545 [inline]
ax25_rt_add net/ax25/ax25_route.c:95 [inline]
ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233
ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
sock_do_ioctl+0xe2/0x400 net/socket.c:950
sock_ioctl+0x32f/0x6c0 net/socket.c:1074
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
Freed by task 550:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
__cache_free mm/slab.c:3487 [inline]
kfree+0xcf/0x230 mm/slab.c:3806
ax25_rt_add net/ax25/ax25_route.c:92 [inline]
ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233
ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
sock_do_ioctl+0xe2/0x400 net/socket.c:950
sock_ioctl+0x32f/0x6c0 net/socket.c:1074
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888066641a80
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
96-byte region [ffff888066641a80, ffff888066641ae0)
The buggy address belongs to the page:
page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0
flags: 0x1fffc0000000200(slab)
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0
raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc
>ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mISDN: fix a race in dev_expire_timer()

commit bdcc5bc25548ef6b08e2e43937148f907c212292 upstream.

Since mISDN_close() uses dev->pending to iterate over active
timers, there is a chance that one timer got removed from the
->pending list in dev_expire_timer() but that the thread
has not called yet wake_up_interruptible()

So mISDN_close() could miss this and free dev before
completion of at least one dev_expire_timer()

syzbot was able to catch this race :

BUG: KASAN: use-after-free in register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827
Write of size 8 at addr ffff88809fc18948 by task syz-executor1/24769

CPU: 1 PID: 24769 Comm: syz-executor1 Not tainted 5.0.0-rc5 #60
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
__asan_report_store8_noabort+0x17/0x20 mm/kasan/generic_report.c:140
register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827
__lock_acquire+0x11f/0x4700 kernel/locking/lockdep.c:3224
lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3841
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152
__wake_up_common_lock+0xc7/0x190 kernel/sched/wait.c:120
__wake_up+0xe/0x10 kernel/sched/wait.c:145
dev_expire_timer+0xe4/0x3b0 drivers/isdn/mISDN/timerdev.c:174
call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
protocol 88fb is buggy, dev hsr_slave_0
protocol 88fb is buggy, dev hsr_slave_1
expire_timers kernel/time/timer.c:1362 [inline]
__run_timers kernel/time/timer.c:1681 [inline]
__run_timers kernel/time/timer.c:1649 [inline]
run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
__do_softirq+0x266/0x95a kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x180/0x1d0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
</IRQ>
RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:101
Code: 90 90 90 90 55 48 89 e5 48 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 98 12 92 7e 81 e2 00 01 1f 00 75 2b 8b 90 d8 12 00 00 <83> fa 02 75 20 48 8b 88 e0 12 00 00 8b 80 dc 12 00 00 48 8b 11 48
RSP: 0018:ffff8880589b7a60 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff888087ce25c0 RBX: 0000000000000001 RCX: ffffffff818f8ca3
RDX: 0000000000000000 RSI: ffffffff818f8b48 RDI: 0000000000000001
RBP: ffff8880589b7a60 R08: ffff888087ce25c0 R09: ffffed1015d25bd0
R10: ffffed1015d25bcf R11: ffff8880ae92de7b R12: ffffea0001ae4680
R13: ffffea0001ae4688 R14: 0000000000000000 R15: ffffea0001b41648
PageIdle include/linux/page-flags.h:398 [inline]
page_is_idle include/linux/page_idle.h:29 [inline]
mark_page_accessed+0x618/0x1140 mm/swap.c:398
touch_buffer fs/buffer.c:59 [inline]
__find_get_block+0x312/0xcc0 fs/buffer.c:1298
sb_find_get_block include/linux/buffer_head.h:338 [inline]
recently_deleted fs/ext4/ialloc.c:682 [inline]
find_inode_bit.isra.0+0x202/0x510 fs/ext4/ialloc.c:722
__ext4_new_inode+0x14ad/0x52c0 fs/ext4/ialloc.c:914
ext4_symlink+0x3f8/0xbe0 fs/ext4/namei.c:3096
vfs_symlink fs/namei.c:4126 [inline]
vfs_symlink+0x378/0x5d0 fs/namei.c:4112
do_symlinkat+0x22b/0x290 fs/namei.c:4153
__do_sys_symlink fs/namei.c:4172 [inline]
__se_sys_symlink fs/namei.c:4170 [inline]
__x64_sys_symlink+0x59/0x80 fs/namei.c:4170
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457b67
Code: 0f 1f 00 b8 5c 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 6d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 58 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 4d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff045ce0f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000058
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 0000000000457b67
RDX: 00007fff045ce173 RSI: 00000000004bd63f RDI: 00007fff045ce160
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013
R10: 0000000000000075 R11: 0000000000000202 R12: 0000000000000000
R13: 0000000000000001 R14: 000000000000029b R15: 0000000000000001

Allocated by task 24763:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc mm/kasan/common.c:496 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
kmalloc include/linux/slab.h:545 [inline]
mISDN_open+0x9a/0x270 drivers/isdn/mISDN/timerdev.c:59
misc_open+0x398/0x4c0 drivers/char/misc.c:141
chrdev_open+0x247/0x6b0 fs/char_dev.c:417
do_dentry_open+0x47d/0x1130 fs/open.c:771
vfs_open+0xa0/0xd0 fs/open.c:880
do_last fs/namei.c:3418 [inline]
path_openat+0x10d7/0x4690 fs/namei.c:3534
do_filp_open+0x1a1/0x280 fs/namei.c:3564
do_sys_open+0x3fe/0x5d0 fs/open.c:1063
__do_sys_openat fs/open.c:1090 [inline]
__se_sys_openat fs/open.c:1084 [inline]
__x64_sys_openat+0x9d/0x100 fs/open.c:1084
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 24762:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
__cache_free mm/slab.c:3487 [inline]
kfree+0xcf/0x230 mm/slab.c:3806
mISDN_close+0x2a1/0x390 drivers/isdn/mISDN/timerdev.c:97
__fput+0x2df/0x8d0 fs/file_table.c:278
____fput+0x16/0x20 fs/file_table.c:309
task_work_run+0x14a/0x1c0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:166
prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff88809fc18900
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 72 bytes inside of
192-byte region [ffff88809fc18900, ffff88809fc189c0)
The buggy address belongs to the page:
page:ffffea00027f0600 count:1 mapcount:0 mapping:ffff88812c3f0040 index:0xffff88809fc18000
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000269f648 ffffea00029f7408 ffff88812c3f0040
raw: ffff88809fc18000 ffff88809fc18000 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88809fc18800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88809fc18880: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88809fc18900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88809fc18980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff88809fc18a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/x25: do not hold the cpu too long in x25_new_lci()

commit cf657d22ee1f0e887326a92169f2e28dc932fd10 upstream.

Due to quadratic behavior of x25_new_lci(), syzbot was able
to trigger an rcu stall.

Fix this by not blocking BH for the whole duration of
the function, and inserting a reschedule point when possible.

If we care enough, using a bitmap could get rid of the quadratic
behavior.

syzbot report :

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    0-...!: (10500 ticks this GP) idle=4fa/1/0x4000000000000002 softirq=283376/283376 fqs=0
rcu:     (t=10501 jiffies g=383105 q=136)
rcu: rcu_preempt kthread starved for 10502 jiffies! g383105 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: RCU grace-period kthread stack dump:
rcu_preempt     I28928    10      2 0x80000000
Call Trace:
context_switch kernel/sched/core.c:2844 [inline]
__schedule+0x817/0x1cc0 kernel/sched/core.c:3485
schedule+0x92/0x180 kernel/sched/core.c:3529
schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803
rcu_gp_fqs_loop kernel/rcu/tree.c:1948 [inline]
rcu_gp_kthread+0x956/0x17a0 kernel/rcu/tree.c:2105
kthread+0x357/0x430 kernel/kthread.c:246
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
NMI backtrace for cpu 0
CPU: 0 PID: 8759 Comm: syz-executor2 Not tainted 5.0.0-rc4+ #51
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101
nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62
arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1211
print_cpu_stall kernel/rcu/tree.c:1348 [inline]
check_cpu_stall kernel/rcu/tree.c:1422 [inline]
rcu_pending kernel/rcu/tree.c:3018 [inline]
rcu_check_callbacks.cold+0x500/0xa4a kernel/rcu/tree.c:2521
update_process_times+0x32/0x80 kernel/time/timer.c:1635
tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161
tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271
__run_hrtimer kernel/time/hrtimer.c:1389 [inline]
__hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451
hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline]
smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
</IRQ>
RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline]
RIP: 0010:queued_write_lock_slowpath+0x13e/0x290 kernel/locking/qrwlock.c:86
Code: 00 00 fc ff df 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 <41> 0f b6 55 00 41 38 d7 7c eb 84 d2 74 e7 48 89 df e8 6c 0f 4f 00
RSP: 0018:ffff88805f117bd8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000300 RBX: ffffffff89413ba0 RCX: 1ffffffff1282774
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89413ba0
RBP: ffff88805f117c70 R08: 1ffffffff1282774 R09: fffffbfff1282775
R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: 00000000000000ff
R13: fffffbfff1282774 R14: 1ffff1100be22f7d R15: 0000000000000003
queued_write_lock include/asm-generic/qrwlock.h:104 [inline]
do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203
__raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline]
_raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312
x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267
x25_bind+0x273/0x340 net/x25/af_x25.c:705
__sys_bind+0x23f/0x290 net/socket.c:1505
__do_sys_bind net/socket.c:1516 [inline]
__se_sys_bind net/socket.c:1514 [inline]
__x64_sys_bind+0x73/0xb0 net/socket.c:1514
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e39
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fafccd0dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39
RDX: 0000000000000012 RSI: 0000000020000240 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fafccd0e6d4
R13: 00000000004bdf8b R14: 00000000004ce4b8 R15: 00000000ffffffff
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8752 Comm: syz-executor4 Not tainted 5.0.0-rc4+ #51
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__x25_find_socket+0x78/0x120 net/x25/af_x25.c:328
Code: 89 f8 48 c1 e8 03 80 3c 18 00 0f 85 a6 00 00 00 4d 8b 64 24 68 4d 85 e4 74 7f e8 03 97 3d fb 49 83 ec 68 74 74 e8 f8 96 3d fb <49> 8d bc 24 88 04 00 00 48 89 f8 48 c1 e8 03 0f b6 04 18 84 c0 74
RSP: 0018:ffff8880639efc58 EFLAGS: 00000246
RAX: 0000000000040000 RBX: dffffc0000000000 RCX: ffffc9000e677000
RDX: 0000000000040000 RSI: ffffffff863244b8 RDI: ffff88806a764628
RBP: ffff8880639efc80 R08: ffff8880a80d05c0 R09: fffffbfff1282775
R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: ffff88806a7645c0
R13: 0000000000000001 R14: ffff88809f29ac00 R15: 0000000000000000
FS:  00007fe8d0c58700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32823000 CR3: 00000000672eb000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
x25_new_lci net/x25/af_x25.c:357 [inline]
x25_connect+0x374/0xdf0 net/x25/af_x25.c:786
__sys_connect+0x266/0x330 net/socket.c:1686
__do_sys_connect net/socket.c:1697 [inline]
__se_sys_connect net/socket.c:1694 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1694
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e39
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe8d0c57c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39
RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe8d0c586d4
R13: 00000000004be378 R14: 00000000004ceb00 R15: 00000000ffffffff

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: linux-x25@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)

commit cfa39381173d5f969daf43582c95ad679189cbc9 upstream.

kvm_ioctl_create_device() does the following:

1. creates a device that holds a reference to the VM object (with a borrowed
reference, the VM's refcount has not been bumped yet)
2. initializes the device
3. transfers the reference to the device to the caller's file descriptor table
4. calls kvm_get_kvm() to turn the borrowed reference to the VM into a real
reference

The ownership transfer in step 3 must not happen before the reference to the VM
becomes a proper, non-borrowed reference, which only happens in step 4.
After step 3, an attacker can close the file descriptor and drop the borrowed
reference, which can cause the refcount of the kvm object to drop to zero.

This means that we need to grab a reference for the device before
anon_inode_getfd(), otherwise the VM can disappear from under us.

Fixes: 852b6d57dc7f ("kvm: add device control API")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (lm80) Fix missing unlock on error in set_fan_div()

commit 07bd14ccc3049f9c0147a91a4227a571f981601a upstream.

Add the missing unlock before return from function set_fan_div()
in the error handling case.

Fixes: c9c63915519b ("hwmon: (lm80) fix a missing check of the status of SMBus read")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: use a dedicated counter for icmp_v4 redirect packets

[ Upstream commit c09551c6ff7fe16a79a42133bcecba5fc2fc3291 ]

According to the algorithm described in the comment block at the
beginning of ip_rt_send_redirect, the host should try to send
'ip_rt_redirect_number' ICMP redirect packets with an exponential
backoff and then stop sending them at all assuming that the destination
ignores redirects.
If the device has previously sent some ICMP error packets that are
rate-limited (e.g TTL expired) and continues to receive traffic,
the redirect packets will never be transmitted. This happens since
peer->rate_tokens will be typically greater than 'ip_rt_redirect_number'
and so it will never be reset even if the redirect silence timeout
(ip_rt_redirect_silence) has elapsed without receiving any packet
requiring redirects.

Fix it by using a dedicated counter for the number of ICMP redirect
packets that has been sent by the host

I have not been able to identify a given commit that introduced the
issue since ip_rt_send_redirect implements the same rate-limiting
algorithm from commit 1da177e4c3f4 ("Linux-2.6.12-rc2")

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Fix a race in EEE enable callback

[ Upstream commit 8a7493e58ad688eb23b81e45461c5d314f4402f1 ]

We are saving the status of EEE even before we try to enable it. This
leads to a race with XMIT function that tries to arm EEE timer before we
set it up.

Fix this by only saving the EEE parameters after all operations are
performed with success.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Fixes: d765955d2ae0 ("stmmac: add the Energy Efficient Ethernet support")
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock: cope with memory allocation failure at socket creation time

[ Upstream commit 225d9464268599a5b4d094d02ec17808e44c7553 ]

In the unlikely event that the kmalloc call in vmci_transport_socket_init()
fails, we end-up calling vmci_transport_destruct() with a NULL vmci_trans()
and oopsing.

This change addresses the above explicitly checking for zero vmci_trans()
at destruction time.

Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vxlan: test dev->flags & IFF_UP before calling netif_rx()

[ Upstream commit 4179cb5a4c924cd233eaadd081882425bc98f44e ]

netif_rx() must be called under a strict contract.

At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.

Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP

Virtual drivers do not have this guarantee, and must
therefore make the check themselves.

Otherwise we risk use-after-free and/or crashes.

Note this patch also fixes a small issue that came
with commit ce6502a8f957 ("vxlan: fix a use after free
in vxlan_encap_bypass"), since the dev->stats.rx_dropped
change was done on the wrong device.

Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Fixes: ce6502a8f957 ("vxlan: fix a use after free in vxlan_encap_bypass")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Petr Machata <petrm@mellanox.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: clear icsk_backoff in tcp_write_queue_purge()

[ Upstream commit 04c03114be82194d4a4858d41dba8e286ad1787c ]

soukjin bae reported a crash in tcp_v4_err() handling
ICMP_DEST_UNREACH after tcp_write_queue_head(sk)
returned a NULL pointer.

Current logic should have prevented this :

  if (seq != tp->snd_una  || !icsk->icsk_retransmits ||
      !icsk->icsk_backoff || fastopen)
      break;

Problem is the write queue might have been purged
and icsk_backoff has not been cleared.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: tcp_v4_err() should be more careful

[ Upstream commit 2c4cc9712364c051b1de2d175d5fbea6be948ebf ]

ICMP handlers are not very often stressed, we should
make them more resilient to bugs that might surface in
the future.

If there is no packet in retransmit queue, we should
avoid a NULL deref.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: soukjin bae <soukjin.bae@samsung.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sky2: Increase D3 delay again

[ Upstream commit 1765f5dcd00963e33f1b8a4e0f34061fbc0e2f7f ]

Another platform requires even longer delay to make the device work
correctly after S3.

So increase the delay to 300ms.

BugLink: https://bugs.launchpad.net/bugs/1798921
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix IPv6 prefix route residue

[ Upstream commit e75913c93f7cd5f338ab373c34c93a655bd309cb ]

Follow those steps:
# ip addr add 2001:123::1/32 dev eth0
# ip addr add 2001:123:456::2/64 dev eth0
# ip addr del 2001:123::1/32 dev eth0
# ip addr del 2001:123:456::2/64 dev eth0
and then prefix route of 2001:123::1/32 will still exist.

This is because ipv6_prefix_equal in check_cleanup_prefix_route
func does not check whether two IPv6 addresses have the same
prefix length. If the prefix of one address starts with another
shorter address prefix, even though their prefix lengths are
different, the return value of ipv6_prefix_equal is true.

Here I add a check of whether two addresses have the same prefix
to decide whether their prefixes are equal.

Fixes: 5b84efecb7d9 ("ipv6 addrconf: don't cleanup prefix route for IFA_F_NOPREFIXROUTE")
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reported-by: Wenhao Zhang <zhangwenhao8@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 3.18.135

pinctrl: msm: fix gpio-hog related boot issues

commit a86caa9ba5d70696ceb35d1d39caa20d8b641387 upstream.

Sven Eckelmann reported an issue with the current IPQ4019 pinctrl.
Setting up any gpio-hog in the device-tree for his device would
"kill the bootup completely":

| [    0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
| [    0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe
| [    1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517
| [    1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register
| [    1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip
| [    1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
| [    1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri

This was also verified on a RT-AC58U (IPQ4018) which would
no longer boot, if a gpio-hog was specified. (Tried forcing
the USB LED PIN (GPIO0) to high.).

The problem is that Pinctrl+GPIO registration is currently
peformed in the following order in pinctrl-msm.c:
1. pinctrl_register()
2. gpiochip_add()
3. gpiochip_add_pin_range()

The actual error code -517 == -EPROBE_DEFER is coming from
pinctrl_get_device_gpio_range(), which is called through:
        gpiochip_add
            of_gpiochip_add
                of_gpiochip_scan_gpios
                    gpiod_hog
                        gpiochip_request_own_desc
                            __gpiod_request
                                chip->request
                                    gpiochip_generic_request
                                       pinctrl_gpio_request
                                          pinctrl_get_device_gpio_range

pinctrl_get_device_gpio_range() is unable to find any valid
pin ranges, since nothing has been added to the pinctrldev_list yet.
so the range can't be found, and the operation fails with -EPROBE_DEFER.

This patch fixes the issue by adding the "gpio-ranges" property to
the pinctrl device node of all upstream Qcom SoC. The pin ranges are
then added by the gpio core.

In order to remain compatible with older, existing DTs (and ACPI)
a check for the "gpio-ranges" property has been added to
msm_gpio_init(). This prevents the driver of adding the same entry
to the pinctrldev_list twice.

Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: Remove unnecessary kfree

commit cd4b1e34655d46950c065d9284b596cd8d7b28cd upstream.

This shouldn't be freed by the HCD as it is owned by the core and
allocated with devm_kzalloc.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kaweth: use skb_cow_head() to deal with cloned skbs

commit 39fba7835aacda65284a86e611774cbba71dac20 upstream.

We can use skb_cow_head() to properly deal with clones,
especially the ones coming from TCP stack that allow their head being
modified. This avoids a copy.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smsc95xx: Use skb_cow_head to deal with cloned skbs

commit e9156cd26a495a18706e796f02a81fee41ec14f4 upstream.

The driver was failing to check that the SKB wasn't cloned
before adding checksum data.
Replace existing handling to extend/copy the header buffer
with skb_cow_head.

Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Woojung Huh <Woojung.Huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/a.out: Clear the dump structure initially

commit 10970e1b4be9c74fce8ab6e3c34a7d718f063f2c upstream.

dump_thread32() in aout_core_dump() does not clear the user32 structure
allocated on the stack as the first thing on function entry.

As a result, the dump.u_comm, dump.u_ar0 and dump.signal which get
assigned before the clearing, get overwritten.

Rename that function to fill_dump() to make it clear what it does and
call it first thing.

This was caught while staring at a patch by Derek Robson
<robsonde@gmail.com>.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Derek Robson <robsonde@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Matz <matz@suse.de>
Cc: x86@kernel.org
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190202005512.3144-1-robsonde@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: Restore the stop PTRACE_EVENT_EXIT

commit cf43a757fd49442bc38f76088b70c2299eed2c2f upstream.

In the middle of do_exit() there is there is a call
"ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process
in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for
for the debugger to release the task or SIGKILL to be delivered.

Skipping past dequeue_signal when we know a fatal signal has already
been delivered resulted in SIGKILL remaining pending and
TIF_SIGPENDING remaining set. This in turn caused the
scheduler to not sleep in PTACE_EVENT_EXIT as it figured
a fatal signal was pending. This also caused ptrace_freeze_traced
in ptrace_check_attach to fail because it left a per thread
SIGKILL pending which is what fatal_signal_pending tests for.

This difference in signal state caused strace to report
strace: Exit of unknown pid NNNNN ignored

Therefore update the signal handling state like dequeue_signal
would when removing a per thread SIGKILL, by removing SIGKILL
from the per thread signal mask and clearing TIF_SIGPENDING.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Ivan Delalande <colona@arista.com>
Cc: stable@vger.kernel.org
Fixes: 35634ffa1751 ("signal: Always notice exiting tasks")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/uprobes: Fix output for multiple string arguments

commit 0722069a5374b904ec1a67f91249f90e1cfae259 upstream.

When printing multiple uprobe arguments as strings the output for the
earlier arguments would also include all later string arguments.

This is best explained in an example:

Consider adding a uprobe to a function receiving two strings as
parameters which is at offset 0xa0 in strlib.so and we want to print
both parameters when the uprobe is hit (on x86_64):

$ echo 'p:func /lib/strlib.so:0xa0 +0(%di):string +0(%si):string' > \
/sys/kernel/debug/tracing/uprobe_events

When the function is called as func("foo", "bar") and we hit the probe,
the trace file shows a line like the following:

[...] func: (0x7f7e683706a0) arg1="foobar" arg2="bar"

Note the extra "bar" printed as part of arg1. This behaviour stacks up
for additional string arguments.

The strings are stored in a dynamically growing part of the uprobe
buffer by fetch_store_string() after copying them from userspace via
strncpy_from_user(). The return value of strncpy_from_user() is then
directly used as the required size for the string. However, this does
not take the terminating null byte into account as the documentation
for strncpy_from_user() cleary states that it "[...] returns the
length of the string (not including the trailing NUL)" even though the
null byte will be copied to the destination.

Therefore, subsequent calls to fetch_store_string() will overwrite
the terminating null byte of the most recently fetched string with
the first character of the current string, leading to the
"accumulation" of strings in earlier arguments in the output.

Fix this by incrementing the return value of strncpy_from_user() by
one if we did not hit the maximum buffer size.

Link: http://lkml.kernel.org/r/20190116141629.5752-1-andreas.ziegler@fau.de
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5baaa59ef09e ("tracing/probes: Implement 'memory' fetch method for uprobes")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alpha: Fix Eiger NR_IRQS to 128

commit bfc913682464f45bc4d6044084e370f9048de9d5 upstream.

Eiger machine vector definition has nr_irqs 128, and working 2.6.26
boot shows SCSI getting IRQ-s 64 and 65. Current kernel boot fails
because Symbios SCSI fails to request IRQ-s and does not find the disks.
It has been broken at least since 3.18 - the earliest I could test with
my gcc-5.

The headers have moved around and possibly another order of defines has
worked in the past - but since 128 seems to be correct and used, fix
arch/alpha/include/asm/irq.h to have NR_IRQS=128 for Eiger.

This fixes 4.19-rc7 boot on my Force Flexor A264 (Eiger subarch).

Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alpha: fix page fault handling for r16-r18 targets

commit 491af60ffb848b59e82f7c9145833222e0bf27a5 upstream.

Fix page fault handling code to fixup r16-r18 registers.
Before the patch code had off-by-two registers bug.
This bug caused overwriting of ps,pc,gp registers instead
of fixing intended r16,r17,r18 (see `struct pt_regs`).

More details:

Initially Dmitry noticed a kernel bug as a failure
on strace test suite. Test passes unmapped userspace
pointer to io_submit:

```c
    #include <err.h>
    #include <unistd.h>
    #include <sys/mman.h>
    #include <asm/unistd.h>
    int main(void)
    {
        unsigned long ctx = 0;
        if (syscall(__NR_io_setup, 1, &ctx))
            err(1, "io_setup");
        const size_t page_size = sysconf(_SC_PAGESIZE);
        const size_t size = page_size * 2;
        void *ptr = mmap(NULL, size, PROT_READ | PROT_WRITE,
                         MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
        if (MAP_FAILED == ptr)
            err(1, "mmap(%zu)", size);
        if (munmap(ptr, size))
            err(1, "munmap");
        syscall(__NR_io_submit, ctx, 1, ptr + page_size);
        syscall(__NR_io_destroy, ctx);
        return 0;
    }
```

Running this test causes kernel to crash when handling page fault:

```
    Unable to handle kernel paging request at virtual address ffffffffffff9468
    CPU 3
    aio(26027): Oops 0
    pc = [<fffffc00004eddf8>]  ra = [<fffffc00004edd5c>]  ps = 0000    Not tainted
    pc is at sys_io_submit+0x108/0x200
    ra is at sys_io_submit+0x6c/0x200
    v0 = fffffc00c58e6300  t0 = fffffffffffffff2  t1 = 000002000025e000
    t2 = fffffc01f159fef8  t3 = fffffc0001009640  t4 = fffffc0000e0f6e0
    t5 = 0000020001002e9e  t6 = 4c41564e49452031  t7 = fffffc01f159c000
    s0 = 0000000000000002  s1 = 000002000025e000  s2 = 0000000000000000
    s3 = 0000000000000000  s4 = 0000000000000000  s5 = fffffffffffffff2
    s6 = fffffc00c58e6300
    a0 = fffffc00c58e6300  a1 = 0000000000000000  a2 = 000002000025e000
    a3 = 00000200001ac260  a4 = 00000200001ac1e8  a5 = 0000000000000001
    t8 = 0000000000000008  t9 = 000000011f8bce30  t10= 00000200001ac440
    t11= 0000000000000000  pv = fffffc00006fd320  at = 0000000000000000
    gp = 0000000000000000  sp = 00000000265fd174
    Disabling lock debugging due to kernel taint
    Trace:
    [<fffffc0000311404>] entSys+0xa4/0xc0
```

Here `gp` has invalid value. `gp is s overwritten by a fixup for the
following page fault handler in `io_submit` syscall handler:

```
    __se_sys_io_submit
    ...
        ldq     a1,0(t1)
        bne     t0,4280 <__se_sys_io_submit+0x180>
```

After a page fault `t0` should contain -EFALUT and `a1` is 0.
Instead `gp` was overwritten in place of `a1`.

This happens due to a off-by-two bug in `dpf_reg()` for `r16-r18`
(aka `a0-a2`).

I think the bug went unnoticed for a long time as `gp` is one
of scratch registers. Any kernel function call would re-calculate `gp`.

Dmitry tracked down the bug origin back to 2.1.32 kernel version
where trap_a{0,1,2} fields were inserted into struct pt_regs.
And even before that `dpf_reg()` contained off-by-one error.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reported-and-reviewed-by: "Dmitry V. Levin" <ldv@altlinux.org>
Cc: stable@vger.kernel.org # v2.1.32+
Bug: https://bugs.gentoo.org/672040
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780

commit e8b22d0a329f0fb5c7ef95406872d268f01ee3b1 upstream.

Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech
touchpad, but the driver needs to be told so to enable the middle touchpad
button.

The elantech_dmi_force_crc_enabled quirk was not necessary with the H780.

Also document the fw_version and caps values detected for both H760 and
H780 models.

Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: bma150 - register input device after setting private data

commit 90cc55f067f6ca0e64e5e52883ece47d8af7b67b upstream.

Otherwise we introduce a race condition where userspace can request input
before we're ready leading to null pointer dereference such as

input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3
Unable to handle kernel NULL pointer dereference at virtual address 00000018
pgd = (ptrval)
[00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] PREEMPT ARM
Modules linked in: bma150 input_polldev [last unloaded: bma150]
CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46
Hardware name: Samsung S5PC110/S5PV210-based board
PC is at input_event+0x8/0x60
LR is at bma150_report_xyz+0x9c/0xe0 [bma150]
pc : [<80450f70>]    lr : [<7f0a614c>]    psr: 800d0013
sp : a4c1fd78  ip : 00000081  fp : 00020000
r10: 00000000  r9 : a5e2944c  r8 : a7455000
r7 : 00000016  r6 : 00000101  r5 : a7617940  r4 : 80909048
r3 : fffffff2  r2 : 00000000  r1 : 00000003  r0 : 00000000
Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 54e34019  DAC: 00000051
Process accelerometer (pid: 2870, stack limit = 0x(ptrval))
Stackck: (0xa4c1fd78 to 0xa4c20000)
fd60:                                                       fffffff3 fc813f6c
fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324
fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10
fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0
fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c
fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000
fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041
fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8
fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001
fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048
fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8
fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720
fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00
ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3
ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002
ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c
ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100
ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000
ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000
ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038
ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000
[<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c)
Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018)
---[ end trace 1c691ee85f2ff243 ]---

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix implicit fb endpoint setup by quirk

commit 2bc16b9f3223d049b57202ee702fcb5b9b507019 upstream.

The commit a60945fd08e4 ("ALSA: usb-audio: move implicit fb quirks to
separate function") introduced an error in the handling of quirks for
implicit feedback endpoints. This commit fixes this.

If a quirk successfully sets up an implicit feedback endpoint, usb-audio
no longer tries to find the implicit fb endpoint itself.

Fixes: a60945fd08e4 ("ALSA: usb-audio: move implicit fb quirks to separate function")
Signed-off-by: Manuel Reinhardt <manuel.rhdt@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Fix impossible ring-buffer sizes warning

commit 528871b456026e6127d95b1b2bd8e3a003dc1614 upstream.

The following commit:

  9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes")

results in perf recording failures with larger mmap areas:

  root@skl:/tmp# perf record -g -a
  failed to mmap with 12 (Cannot allocate memory)

The root cause is that the following condition is buggy:

if (order_base_2(size) >= MAX_ORDER)
goto fail;

The problem is that @size is in bytes and MAX_ORDER is in pages,
so the right test is:

if (order_base_2(size) >= PAGE_SHIFT+MAX_ORDER)
goto fail;

Fix it.

Reported-by: "Jin, Yao" <yao.jin@linux.intel.com>
Bisected-by: Borislav Petkov <bp@alien8.de>
Analyzed-by: Peter Zijlstra <peterz@infradead.org>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Fixes: 9dff0aa95a32 ("perf/core: Don't WARN() for impossible ring-buffer sizes")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Limit memory used by lock request calls to a page

[ Upstream commit 92a8109e4d3a34fb6b115c9098b51767dc933444 ]

The code tries to allocate a contiguous buffer with a size supplied by
the server (maxBuf). This could fail if memory is fragmented since it
results in high order allocations for commonly used server
implementations. It is also wasteful since there are probably
few locks in the usual case. Limit the buffer to be no larger than a
page to avoid memory allocation failures due to fragmentation.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pl061: handle failed allocations

[ Upstream commit df209c43a0e8258e096fb722dfbdae4f0dd13fde ]

devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can
fail internal allocation and return NULL. Using any of the assigned
objects without checking is not safe. As this is early in the boot
phase and these allocations really should not fail, any failure here
is probably an indication of a more serious issue so it makes little
sense to try and rollback the previous allocated resources or try to
continue; but rather the probe function is simply exited with -ENOMEM.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 684284b64aae ("ARM: integrator: add MMCI device to IM-PD1")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: kirkwood: Fix polarity of GPIO fan lines

[ Upstream commit b5f034845e70916fd33e172fad5ad530a29c10ab ]

These two lines are active high, not active low. The bug was
found when we changed the kernel to respect the polarity defined
in the device tree.

Fixes: 1b90e06b1429 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan")
Cc: Jamie Lentin <jm@lentin.co.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Julien D'Ascenzio <jdascenzio@posteo.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Reported-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Tested-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: da850-evm: Correct the sound card name

[ Upstream commit 7fca69d4e43fa1ae9cb4f652772c132dc5a659c6 ]

To avoid the following error:
asoc-simple-card sound: ASoC: Failed to create card debugfs directory

Which is because the card name contains '/' character, which can not be
used in file or directory names.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "exec: load_script: don't blindly truncate shebang string"

commit cb5b020a8d38f77209d0472a0fea755299a8ec78 upstream.

This reverts commit 8099b047ecc431518b9bb6bdbba3549bbecdc343.

It turns out that people do actually depend on the shebang string being
truncated, and on the fact that an interpreter (like perl) will often
just re-interpret it entirely to get the full argument list.

Reported-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: ehci-msm: fix handling platform_get_irq result

commit 0c43e9d835b003d862a5f76e3affcc1f973fb3c0 upstream.

The function can return negative values.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Force mac header to start of data on xmit

commit 9114daa825fc3f335f9bea3313ce667090187280 upstream.

The caller of ndo_start_xmit may not already have called
skb_reset_mac_header. The returned value of skb_mac_header/eth_hdr
therefore can be in the wrong position and even outside the current skbuff.
This for example happens when the user binds to the device using a
PF_PACKET-SOCK_RAW with enabled qdisc-bypass:

int opt = 4;
setsockopt(sock, SOL_PACKET, PACKET_QDISC_BYPASS, &opt, sizeof(opt));

Since eth_hdr is used all over the codebase, the batadv_interface_tx
function must always take care of resetting it.

Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Reported-by: syzbot+9d7405c7faa390e60b4e@syzkaller.appspotmail.com
Reported-by: syzbot+7d20bc3f1ddddc0f9079@syzkaller.appspotmail.com
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

batman-adv: Avoid WARN on net_device without parent in netns

commit 955d3411a17f590364238bd0d3329b61f20c1cd2 upstream.

It is not allowed to use WARN* helpers on potential incorrect input from
the user or transient problems because systems configured as panic_on_warn
will reboot due to such a problem.

A NULL return value of __dev_get_by_index can be caused by various problems
which can either be related to the system configuration or problems
(incorrectly returned network namespaces) in other (virtual) net_device
drivers. batman-adv should not cause a (harmful) WARN in this situation and
instead only report it via a simple message.

Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Reported-by: syzbot+c764de0fcfadca9a8595@syzkaller.appspotmail.com
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: refine validation of template and selector families

commit 35e6103861a3a970de6c84688c6e7a1f65b164ca upstream.

The check assumes that in transport mode, the first templates family
must match the address family of the policy selector.

Syzkaller managed to build a template using MODE_ROUTEOPTIMIZATION,
with ipv4-in-ipv6 chain, leading to following splat:

BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x1db/0x1854
Read of size 4 at addr ffff888063e57aa0 by task a.out/2050
xfrm_state_find+0x1db/0x1854
xfrm_tmpl_resolve+0x100/0x1d0
xfrm_resolve_and_create_bundle+0x108/0x1000 [..]

Problem is that addresses point into flowi4 struct, but xfrm_state_find
treats them as being ipv6 because it uses templ->encap_family is used
(AF_INET6 in case of reproducer) rather than family (AF_INET).

This patch inverts the logic: Enforce 'template family must match
selector' EXCEPT for tunnel and BEET mode.

In BEET and Tunnel mode, xfrm_tmpl_resolve_one will have remote/local
address pointers changed to point at the addresses found in the template,
rather than the flowi ones, so no oob read will occur.

Reported-by: 3ntr0py1337@gmail.com
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()

commit 4aac9228d16458cedcfd90c7fb37211cf3653ac3 upstream.

con_fault() can transition the connection into STANDBY right after
ceph_con_keepalive() clears STANDBY in clear_standby():

    libceph user thread               ceph-msgr worker

ceph_con_keepalive()
  mutex_lock(&con->mutex)
  clear_standby(con)
  mutex_unlock(&con->mutex)
                                mutex_lock(&con->mutex)
                                con_fault()
                                  ...
                                  if KEEPALIVE_PENDING isn't set
                                    set state to STANDBY
                                  ...
                                mutex_unlock(&con->mutex)
  set KEEPALIVE_PENDING
  set WRITE_PENDING

This triggers warnings in clear_standby() when either ceph_con_send()
or ceph_con_keepalive() get to clearing STANDBY next time.

I don't see a reason to condition queue_con() call on the previous
value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING
into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING
could have been a non-atomic flag.

Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: debug: fix the ring buffer implementation

commit 13054abbaa4f1fd4e6f3b4b63439ec033b4c8035 upstream.

Ring buffer implementation in hid_debug_event() and hid_debug_events_read()
is strange allowing lost or corrupted data. After commit 717adfdaf147
("HID: debug: check length before copy_to_user()") it is possible to enter
an infinite loop in hid_debug_events_read() by providing 0 as count, this
locks up a system. Fix this by rewriting the ring buffer implementation
with kfifo and simplify the code.

This fixes CVE-2019-3819.

v2: fix an execution logic and add a comment
v3: use __set_current_state() instead of set_current_state()

Backport to v3.18: some (tree-wide) patches are missing in v3.18 so
cherry-pick relevant pieces from:
* 6396bb221514 ("treewide: kzalloc() -> kcalloc()")
* a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement")
* 92529623d242 ("HID: debug: improve hid_debug_event()")
* 174cd4b1e5fb ("sched/headers: Prepare to move signal wakeup & sigpending
methods from <linux/sched.h> into <linux/sched/signal.h>")
* 8fec02a73e31 ("HID: debug: fix error handling in hid_debug_events_read()")

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1669187
Cc: stable@vger.kernel.org # v4.18+
Fixes: cd667ce24796 ("HID: use debugfs for events/reports dumping")
Fixes: 717adfdaf147 ("HID: debug: check length before copy_to_user()")
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user

commit 728354c005c36eaf44b6e5552372b67e60d17f56 upstream.

The function was unconditionally returning 0, and a caller would have to
rely on the returned fence pointer being NULL to detect errors. However,
the function vmw_execbuf_copy_fence_user() would expect a non-zero error
code in that case and would BUG otherwise.

So make sure we return a proper non-zero error code if the fence pointer
returned is NULL.

Cc: <stable@vger.kernel.org>
Fixes: ae2a104058e2: ("vmwgfx: Implement fence objects")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Fix setting of dma masks

commit 4cbfa1e6c09e98450aab3240e5119b0ab2c9795b upstream.

Previously we set only the dma mask and not the coherent mask. Fix that.
Also, for clarity, make sure both are initially set to 64 bits.

Cc: <stable@vger.kernel.org>
Fixes: 0d00c488f3de: ("drm/vmwgfx: Fix the driver for large dma addresses")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/modes: Prevent division by zero htotal

commit a2fcd5c84f7a7825e028381b10182439067aa90d upstream.

This patch prevents division by zero htotal.

In a follow-up mail Tina writes:

> > How did you manage to get here with htotal == 0? This needs backtraces (or if
> > this is just about static checkers, a mention of that).
> > -Daniel
>
> In GVT-g, we are trying to enable a virtual display w/o setting timings for a pipe
> (a.k.a htotal=0), then we met the following kernel panic:
>
> [   32.832048] divide error: 0000 [#1] SMP PTI
> [   32.833614] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc4-sriov+ #33
> [   32.834438] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.10.1-0-g8891697-dirty-20180511_165818-tinazhang-linux-1 04/01/2014
> [   32.835901] RIP: 0010:drm_mode_hsync+0x1e/0x40
> [   32.836004] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66
> [   32.836004] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206
> [   32.836004] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000
> [   32.836004] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0
> [   32.836004] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330
> [   32.836004] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000
> [   32.836004] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800
> [   32.836004] FS:  0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000
> [   32.836004] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   32.836004] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0
> [   32.836004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [   32.836004] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [   32.836004] Call Trace:
> [   32.836004]  intel_mode_from_pipe_config+0x72/0x90
> [   32.836004]  intel_modeset_setup_hw_state+0x569/0xf90
> [   32.836004]  intel_modeset_init+0x905/0x1db0
> [   32.836004]  i915_driver_load+0xb8c/0x1120
> [   32.836004]  i915_pci_probe+0x4d/0xb0
> [   32.836004]  local_pci_probe+0x44/0xa0
> [   32.836004]  ? pci_assign_irq+0x27/0x130
> [   32.836004]  pci_device_probe+0x102/0x1c0
> [   32.836004]  driver_probe_device+0x2b8/0x480
> [   32.836004]  __driver_attach+0x109/0x110
> [   32.836004]  ? driver_probe_device+0x480/0x480
> [   32.836004]  bus_for_each_dev+0x67/0xc0
> [   32.836004]  ? klist_add_tail+0x3b/0x70
> [   32.836004]  bus_add_driver+0x1e8/0x260
> [   32.836004]  driver_register+0x5b/0xe0
> [   32.836004]  ? mipi_dsi_bus_init+0x11/0x11
> [   32.836004]  do_one_initcall+0x4d/0x1eb
> [   32.836004]  kernel_init_freeable+0x197/0x237
> [   32.836004]  ? rest_init+0xd0/0xd0
> [   32.836004]  kernel_init+0xa/0x110
> [   32.836004]  ret_from_fork+0x35/0x40
> [   32.836004] Modules linked in:
> [   32.859183] ---[ end trace 525608b0ed0e8665 ]---
> [   32.859722] RIP: 0010:drm_mode_hsync+0x1e/0x40
> [   32.860287] Code: 31 c0 c3 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 8b 87 d8 00 00 00 85 c0 75 22 8b 4f 68 85 c9 78 1b 69 47 58 e8 03 00 00 99 <f7> f9 b9 d3 4d 62 10 05 f4 01 00 00 f7 e1 89 d0 c1 e8 06 f3 c3 66
> [   32.862680] RSP: 0000:ffffc900000ebb90 EFLAGS: 00010206
> [   32.863309] RAX: 0000000000000000 RBX: ffff88001c67c8a0 RCX: 0000000000000000
> [   32.864182] RDX: 0000000000000000 RSI: ffff88001c67c000 RDI: ffff88001c67c8a0
> [   32.865206] RBP: ffff88001c7d03a0 R08: ffff88001c67c8a0 R09: ffff88001c7d0330
> [   32.866359] R10: ffffffff822c3a98 R11: 0000000000000001 R12: ffff88001c67c000
> [   32.867213] R13: ffff88001c7d0370 R14: ffffffff8207eb78 R15: ffff88001c67c800
> [   32.868075] FS:  0000000000000000(0000) GS:ffff88001da00000(0000) knlGS:0000000000000000
> [   32.868983] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   32.869659] CR2: 0000000000000000 CR3: 000000000220a000 CR4: 00000000000006f0
> [   32.870599] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [   32.871598] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> [   32.872549] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>
> Since drm_mode_hsync() has the logic to check mode->htotal, I just extend it to cover the case htotal==0.

Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
[danvet: Add additional explanations + cc: stable.]
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1548228539-3061-1-git-send-email-tina.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: iop32x/n2100: fix PCI IRQ mapping

commit db4090920ba2d61a5827a23e441447926a02ffee upstream.

Booting 4.20 on a TheCUS N2100 results in a kernel oops while probing
PCI, due to n2100_pci_map_irq() having been discarded during boot.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: stable@vger.kernel.org # 2.6.18+
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: OCTEON: don't set octeon_dma_bar_type if PCI is disabled

commit dcf300a69ac307053dfb35c2e33972e754a98bce upstream.

Don't set octeon_dma_bar_type if PCI is disabled. This avoids creation
of the MSI irqchip later on, and saves a bit of memory.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: a214720cbf50 ("Disable MSI also when pcie-octeon.pcie_disable on")
Cc: stable@vger.kernel.org # v3.3+
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

debugfs: fix debugfs_rename parameter checking

commit d88c93f090f708c18195553b352b9f205e65418f upstream.

debugfs_rename() needs to check that the dentries passed into it really
are valid, as sometimes they are not (i.e. if the return value of
another debugfs call is passed into this one.) So fix this up by
properly checking if the two parent directories are errors (they are
allowed to be NULL), and if the dentry to rename is not NULL or an
error.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>