ARM64: zynqmp: Fix W=1 dtc 1.4 warnings

[ Upstream commit 4ea2a6be9565455f152c12f80222af1582ede0c7 ]

The patch removes these warnings reported by dtc 1.4:
Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: omap: fix race of pm runtime with irq handler in probe

[ Upstream commit 12a7f17fac5b370bec87259e4c718faf563ce900 ]

Now races can happen between interrupt handler execution and PM runtime in
error handling code path in probe and in dwc3_omap_remove() which will lead
to system crash:

in probe:
...
 err1:
pm_runtime_put_sync(dev);
^^ PM runtime can race with IRQ handler when deferred probing happening
   due to extcon
pm_runtime_disable(dev);

return ret;

in dwc3_omap_remove:
...
dwc3_omap_disable_irqs(omap);
^^ IRQs are disabled in HW, but handler may still run
of_platform_depopulate(omap->dev);
pm_runtime_put_sync(&pdev->dev);
^^ PM runtime can race with IRQ handler
pm_runtime_disable(&pdev->dev);

return 0;

So, OMAP DWC3 IRQ need to be disabled before calling
pm_runtime_put() in probe and in dwc3_omap_remove().

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path.

[ Upstream commit 75bdc7f31a3a6e9a12e218b31a44a1f54a91554c ]

Add some missing 'of_node_put()' in early exit error path.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: consider '::' as wildcard address in l2tp_ip6 socket lookup

[ Upstream commit 97b84fd6d91766ea57dcc350d78f42639e011c30 ]

An L2TP socket bound to the unspecified address should match with any
address. If not, it can't receive any packet and __l2tp_ip6_bind_lookup()
can't prevent another socket from binding on the same device/tunnel ID.

While there, rename the 'addr' variable to 'sk_laddr' (local addr), to
make following patch clearer.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: ioatdma: workaround SKX ioatdma version

[ Upstream commit 34a31f0af84158955a9747fb5c6712da5bbb5331 ]

The Skylake ioatdma is technically CBDMA 3.2+ and contains the same hardware
bits with some additional 3.3 features, but it's not really 3.3 where the
driver is concerned.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: ioatdma: Add Skylake PCI Dev ID

[ Upstream commit 1594c18fd297a8edcc72bc4b161f3f52603ebb92 ]

Adding Skylake Xeon PCI device ids for ioatdma and related bits.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

openrisc: Add _text symbol to fix ksym build error

[ Upstream commit 086cc1c31a0ec075dac02425367c871bb65bc2c9 ]

The build robot reports:

   .tmp_kallsyms1.o: In function `kallsyms_relative_base':
>> (.rodata+0x8a18): undefined reference to `_text'

This is when using 'make alldefconfig'. Adding this _text symbol to mark
the start of the kernel as in other architecture fixes this.

Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND

[ Upstream commit 88e20c74ee020f9e0c99dfce0dd9aa61c3f0cca0 ]

The ICOLL controller doesn't provide any facility to configure the
wakeup sources. That's the reason why this implementation lacks
the irq_set_wake implementation. But this prevent us from properly
entering power management states like "suspend to idle".

So enable the flags IRQCHIP_SKIP_SET_WAKE and
IRQCHIP_MASK_ON_SUSPEND to let the irqchip core allows and handles
the power management.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Link: https://lkml.kernel.org/r/1482863397-11400-1-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL

[ Upstream commit a1792cda51300e15b03549cccf0b09f3be82e697 ]

The clk_ref_div is not configured in the correct position of the
register. The patch fixes that clk_ref_div, Pre-Scalar, is assigned
the wrong value.

Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: dw: Make debugfs name unique between instances

[ Upstream commit 13288bdf4adbaa6bd1267f10044c1bc25d90ce7f ]

Some system have multiple dw devices. Currently the driver uses a
fixed name for the debugfs dir. Append dev name to the debugfs dir
name to make it unique.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tlv320aic3x: Mark the RESET register as volatile

[ Upstream commit 63c3194b82530bd71fd49db84eb7ab656b8d404a ]

The RESET register only have one self clearing bit and it should not be
cached. If it is cached, when we sync the registers back to the chip we
will initiate a software reset as well, which is not desirable.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/keystone: Fix "scheduling while atomic" on rt

[ Upstream commit 2f884e6e688a0deb69e6c9552e51aef8b7e3f5f1 ]

The below call chain generates "scheduling while atomic" backtrace and
causes system crash when Keystone 2 IRQ chip driver is used with RT-kernel:

gic_handle_irq()
 |-__handle_domain_irq()
  |-generic_handle_irq()
   |-keystone_irq_handler()
    |-regmap_read()
     |-regmap_lock_spinlock()
      |-rt_spin_lock()

The reason is that Keystone driver dispatches IRQ using chained IRQ handler
and accesses I/O memory through syscon->regmap(mmio) which is implemented
as fast_io regmap and uses regular spinlocks for synchronization, but
spinlocks transformed to rt_mutexes on RT.

Hence, convert Keystone 2 IRQ driver to use generic irq handler instead of
chained IRQ handler. This way it will be compatible with RT kernel where it
will be forced thread IRQ handler while in non-RT kernel it still will be
executed in HW IRQ context.

Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Suman Anna <s-anna@ti.com>
Link: https://lkml.kernel.org/r/20161208233310.10329-1-grygorii.strashko@ti.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio-pci: use 32-bit comparisons for register address for gcc-4.5

[ Upstream commit 45e869714489431625c569d21fc952428d761476 ]

Using ancient compilers (gcc-4.5 or older) on ARM, we get a link
failure with the vfio-pci driver:

ERROR: "__aeabi_lcmp" [drivers/vfio/pci/vfio-pci.ko] undefined!

The reason is that the compiler tries to do a comparison of
a 64-bit range. This changes it to convert to a 32-bit number
explicitly first, as newer compilers do for themselves.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set

[ Upstream commit a6cb3b864b21b7345f824a4faa12b723c8aaf099 ]

For every submission buffer object one of MSM_SUBMIT_BO_WRITE
and MSM_SUBMIT_BO_READ must be set (and nothing else). If we
allowed zero then the buffer object would never get queued to
be unreferenced.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: Put back the vaddr in submit_reloc()

[ Upstream commit 6490abc4bc35fa4f3bdb9c7e49096943c50e29ea ]

The error cases in submit_reloc() need to put back the virtual
address of the bo before failling. Add a single failure path
for the function.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: Ensure that the hardware write pointer is valid

[ Upstream commit 88b333b0ed790f9433ff542b163bf972953b74d3 ]

Currently the value written to CP_RB_WPTR is calculated on the fly as
(rb->next - rb->start). But as the code is designed rb->next is wrapped
before writing the commands so if a series of commands happened to
fit perfectly in the ringbuffer, rb->next would end up being equal to
rb->size / 4 and thus result in an out of bounds address to CP_RB_WPTR.

The easiest way to fix this is to mask WPTR when writing it to the
hardware; it makes the hardware happy and the rest of the ringbuffer
math appears to work and there isn't any point in upsetting anything.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[squash in is_power_of_2() check]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Fix raw qp flow steering rules under SRIOV

[ Upstream commit 10b1c04e92229ebeb38ccd0dcf2b6d3ec73c0575 ]

Demoting simple flow steering rule priority (for DPDK) was achieved by
wrapping FW commands MLX4_QP_FLOW_STEERING_ATTACH/DETACH for the PF
as well, and forcing the priority to MLX4_DOMAIN_NIC in the wrapper
function for the PF and all VFs.

In function mlx4_ib_create_flow(), this change caused the main rule
creation for the PF to be wrapped, while it left the associated
tunnel steering rule creation unwrapped for the PF.

This mismatch caused rule deletion failures in mlx4_ib_destroy_flow()
for the PF when the detach wrapper function did not find the associated
tunnel-steering rule (since creation of that rule for the PF did not
go through the wrapper function).

Fix this by setting MLX4_QP_FLOW_STEERING_ATTACH/DETACH to be "native"
(so that the PF invocation does not go through the wrapper), and perform
the required priority demotion for the PF in the mlx4_ib_create_flow()
code path.

Fixes: 48564135cba8 ("net/mlx4_core: Demote simple multicast and broadcast flow steering rules")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4: Remove BUG_ON from ICM allocation routine

[ Upstream commit c1d5f8ff80ea84768f5fae1ca9d1abfbb5e6bbaa ]

This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent()
by checking DMA address alignment in advance and performing proper
folding in case of error.

Fixes: 5b0bf5e25efe ("mlx4_core: Support ICM tables in coherent memory")
Reported-by: Ozgur Karatas <okaratas@member.fsf.org>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Use-after-free causes a resource leak in flow-steering detach

[ Upstream commit 3b01fe7f91c8e4f9afc4fae3c5af72c14958d2d8 ]

mlx4_QP_FLOW_STEERING_DETACH_wrapper first removes the steering
rule (which results in freeing the rule structure), and then
references a field in this struct (the qp number) when releasing the
busy-status on the rule's qp.

Since this memory was freed, it could reallocated and changed.
Therefore, the qp number in the struct may be incorrect,
so that we are releasing the incorrect qp. This leaves the rule's qp
in the busy state (and could possibly release an incorrect qp as well).

Fix this by saving the qp number in a local variable, for use after
removing the steering rule.

Fixes: 2c473ae7e582 ("net/mlx4_core: Disallow releasing VF QPs which have steering rules")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output

[ Upstream commit e4c5e13aa45c23692e4acf56f0b3533f328199b2 ]

There is an inconsistent conditional judgement between __ip6_append_data
and ip6_finish_output functions, the variable length in __ip6_append_data
just include the length of application's payload and udp6 header, don't
include the length of ipv6 header, but in ip6_finish_output use
(skb->len > ip6_skb_dst_mtu(skb)) as judgement, and skb->len include the
length of ipv6 header.

That causes some particular application's udp6 payloads whose length are
between (MTU - IPv6 Header) and MTU were fragmented by ip6_fragment even
though the rst->dev support UFO feature.

Add the length of ipv6 header to length in __ip6_append_data to keep
consistent conditional judgement as ip6_finish_output for ip6 fragment.

Signed-off-by: Zheng Li <james.z.li@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Disable RoCE on the e-switch management port under switchdev mode

[ Upstream commit 9da34cd34e85aacc55af8774b81b1f23e86014f9 ]

Under the switchdev/offloads mode, packets that don't match any
e-switch steering rule are sent towards the e-switch management
port. We use a NIC HW steering rule set per vport (uplink and VFs)
to make them be received into the host OS through the respective
vport representor netdevice.

Currnetly such missed RoCE packets will not get to this NIC steering
rule, and hence VF RoCE will not work over the slow path of the offloads
mode. This is b/c these packets will be matched by a steering rule added
by the firmware that serves RoCE traffic set on the PF NIC vport which
is also the e-switch management port under SRIOV.

Disabling RoCE on the e-switch management vport when we are in the offloads
mode, will signal to the firmware to remove their RoCE rule, and then the
missed RoCE packets will be matched by the representor NIC steering rule
as any other missed packets.

To achieve that, we disable RoCE on the PF vport. We do that by removing
(hot-unplugging) the IB device instance associated with the PF. This is
also required by our current model where the PF serves as the uplink
representor and hence only SW switching (TC, bridge, OVS) applications
and slow path vport mlx5e net-device should be running over that vport.

Fixes: c930a3ad7453 ('net/mlx5e: Add devlink based SRIOV mode changes')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags

[ Upstream commit 4cf48f1d7520a4d325af58eded4d8090e1b40be7 ]

Trying to initialize eMMC slot as SDIO or SD cause failure in n900 port of
qemu. eMMC itself is not detected and is not working.

Real Nokia N900 harware does not have this problem. As eMMC is really not
SDIO or SD based such change is harmless and will fix support for qemu.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: am57xx-idk: Put USB2 port in peripheral mode

[ Upstream commit 5acd016c88937be3667ba4e6b60f0f74455b5e80 ]

USB2 port can be operated in dual-role mode but till we
have dual-role support in dwc3 driver let's limit this
port to peripheral mode.

If we don't do so it defaults to host mode. USB1 port
is meant for host only operation and we don't want
both ports in host only mode.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: input: Specify the interrupt number of TPS65217 power button

[ Upstream commit 820381572fc015baa4f5744f5d4583ec0c0f1b82 ]

Specify the power button interrupt number which is from the datasheet.

Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: power/supply: Update TPS65217 properties

[ Upstream commit 81d7358d7038dd1001547950087e5b0641732f3f ]

Add interrupt specifiers for USB and AC charger input. Interrupt numbers
are from the datasheet.
Fix wrong property for compatible string.

Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: omap2+: fixing wrong strcat for Non-NULL terminated string

[ Upstream commit 5066d5296ff2db20625e5f46e7338872c90c649f ]

Issue caught with static analysis tool:
"Dangerous usage of 'name' (strncpy doesn't always 0-terminate it)"

Use strlcpy _includes_ the NUL terminator, and  strlcat() which ensures
that it won't overflow the buffer.

Reported-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
CC: Russell King <linux@armlinux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: add support for RTL8168 series add-on card.

[ Upstream commit 610c908773d30907c950ca3b2ee8ac4b2813537b ]

This chip is the same as RTL8168, but its device id is 0x8161.

Signed-off-by: Chun-Hao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mce/AMD: Make the init code more robust

[ Upstream commit 0dad3a3014a0b9e72521ff44f17e0054f43dcdea ]

If mce_device_init() fails then the mce device pointer is NULL and the
AMD mce code happily dereferences it.

Add a sanity check.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

device-dax: fix sysfs duplicate warnings

commit bbb3be170ac2891526ad07b18af7db226879a8e7 upstream.

Fix warnings of the form...

     WARNING: CPU: 10 PID: 4983 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80
     sysfs: cannot create duplicate filename '/class/dax/dax12.0'
     Call Trace:
      dump_stack+0x63/0x86
      __warn+0xcb/0xf0
      warn_slowpath_fmt+0x5a/0x80
      ? kernfs_path_from_node+0x4f/0x60
      sysfs_warn_dup+0x62/0x80
      sysfs_do_create_link_sd.isra.2+0x97/0xb0
      sysfs_create_link+0x25/0x40
      device_add+0x266/0x630
      devm_create_dax_dev+0x2cf/0x340 [dax]
      dax_pmem_probe+0x1f5/0x26e [dax_pmem]
      nvdimm_bus_probe+0x71/0x120

...by reusing the namespace id for the device-dax instance name.

Now that we have decided that there will never by more than one
device-dax instance per libnvdimm-namespace parent device [1], we can
directly reuse the namepace ids. There are some possible follow-on
cleanups, but those are saved for a later patch to simplify the -stable
backport.

[1]: https://lists.01.org/pipermail/linux-nvdimm/2016-December/008266.html

Fixes: 98a29c39dc68 ("libnvdimm, namespace: allow creation of multiple pmem...")
Cc: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Dariusz Dokupil <dariusz.dokupil@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: skb_needs_check() accepts CHECKSUM_NONE for tx

commit 6e7bc478c9a006c701c14476ec9d389a484b4864 upstream.

My recent change missed fact that UFO would perform a complete
UDP checksum before segmenting in frags.

In this case skb->ip_summed is set to CHECKSUM_NONE.

We need to add this valid case to skb_needs_check()

Fixes: b2504a5dbef3 ("net: reduce skb_warn_bad_offload() noise")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore: Use dynamic spinlock initializer

commit e9a330c4289f2ba1ca4bf98c2b430ab165a8931b upstream.

The per-prz spinlock should be using the dynamic initializer so that
lockdep can correctly track it. Without this, under lockdep, we get a
warning at boot that the lock is in non-static memory.

Fixes: 109704492ef6 ("pstore: Make spinlock per zone instead of global")
Fixes: 76d5692a5803 ("pstore: Correctly initialize spinlock and flags")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore: Correctly initialize spinlock and flags

commit 76d5692a58031696e282384cbd893832bc92bd76 upstream.

The ram backend wasn't always initializing its spinlock correctly. Since
it was coming from kzalloc memory, though, it was harmless on
architectures that initialize unlocked spinlocks to 0 (at least x86 and
ARM). This also fixes a possibly ignored flag setting too.

When running under CONFIG_DEBUG_SPINLOCK, the following Oops was visible:

[    0.760836] persistent_ram: found existing buffer, size 29988, start 29988
[    0.765112] persistent_ram: found existing buffer, size 30105, start 30105
[    0.769435] persistent_ram: found existing buffer, size 118542, start 118542
[    0.785960] persistent_ram: found existing buffer, size 0, start 0
[    0.786098] persistent_ram: found existing buffer, size 0, start 0
[    0.786131] pstore: using zlib compression
[    0.790716] BUG: spinlock bad magic on CPU#0, swapper/0/1
[    0.790729]  lock: 0xffffffc0d1ca9bb0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[    0.790742] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-rc2+ #913
[    0.790747] Hardware name: Google Kevin (DT)
[    0.790750] Call trace:
[    0.790768] [<ffffff900808ae88>] dump_backtrace+0x0/0x2bc
[    0.790780] [<ffffff900808b164>] show_stack+0x20/0x28
[    0.790794] [<ffffff9008460ee0>] dump_stack+0xa4/0xcc
[    0.790809] [<ffffff9008113cfc>] spin_dump+0xe0/0xf0
[    0.790821] [<ffffff9008113d3c>] spin_bug+0x30/0x3c
[    0.790834] [<ffffff9008113e28>] do_raw_spin_lock+0x50/0x1b8
[    0.790846] [<ffffff9008a2d2ec>] _raw_spin_lock_irqsave+0x54/0x6c
[    0.790862] [<ffffff90083ac3b4>] buffer_size_add+0x48/0xcc
[    0.790875] [<ffffff90083acb34>] persistent_ram_write+0x60/0x11c
[    0.790888] [<ffffff90083aab1c>] ramoops_pstore_write_buf+0xd4/0x2a4
[    0.790900] [<ffffff90083a9d3c>] pstore_console_write+0xf0/0x134
[    0.790912] [<ffffff900811c304>] console_unlock+0x48c/0x5e8
[    0.790923] [<ffffff900811da18>] register_console+0x3b0/0x4d4
[    0.790935] [<ffffff90083aa7d0>] pstore_register+0x1a8/0x234
[    0.790947] [<ffffff90083ac250>] ramoops_probe+0x6b8/0x7d4
[    0.790961] [<ffffff90085ca548>] platform_drv_probe+0x7c/0xd0
[    0.790972] [<ffffff90085c76ac>] driver_probe_device+0x1b4/0x3bc
[    0.790982] [<ffffff90085c7ac8>] __device_attach_driver+0xc8/0xf4
[    0.790996] [<ffffff90085c4bfc>] bus_for_each_drv+0xb4/0xe4
[    0.791006] [<ffffff90085c7414>] __device_attach+0xd0/0x158
[    0.791016] [<ffffff90085c7b18>] device_initial_probe+0x24/0x30
[    0.791026] [<ffffff90085c648c>] bus_probe_device+0x50/0xe4
[    0.791038] [<ffffff90085c35b8>] device_add+0x3a4/0x76c
[    0.791051] [<ffffff90087d0e84>] of_device_add+0x74/0x84
[    0.791062] [<ffffff90087d19b8>] of_platform_device_create_pdata+0xc0/0x100
[    0.791073] [<ffffff90087d1a2c>] of_platform_device_create+0x34/0x40
[    0.791086] [<ffffff900903c910>] of_platform_default_populate_init+0x58/0x78
[    0.791097] [<ffffff90080831fc>] do_one_initcall+0x88/0x160
[    0.791109] [<ffffff90090010ac>] kernel_init_freeable+0x264/0x31c
[    0.791123] [<ffffff9008a25bd0>] kernel_init+0x18/0x11c
[    0.791133] [<ffffff9008082ec0>] ret_from_fork+0x10/0x50
[    0.793717] console [pstore-1] enabled
[    0.797845] pstore: Registered ramoops as persistent store backend
[    0.804647] ramoops: attached 0x100000@0xf7edc000, ecc: 0/0

Fixes: 663deb47880f ("pstore: Allow prz to control need for locking")
Fixes: 109704492ef6 ("pstore: Make spinlock per zone instead of global")
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore: Allow prz to control need for locking

commit 663deb47880f2283809669563c5a52ac7c6aef1a upstream.

In preparation of not locking at all for certain buffers depending on if
there's contention, make locking optional depending on the initialization
of the prz.

Signed-off-by: Joel Fernandes <joelaf@google.com>
[kees: moved locking flag into prz instead of via caller arguments]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

v4l: s5c73m3: fix negation operator

commit a2370ba2752538404e363346b339869c9973aeac upstream.

Bool values should be negated using logical operators. Using bitwise operators
results in unexpected and possibly incorrect results.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dentry name snapshots

commit 49d31c2f389acfe83417083e1208422b4091cd9e upstream.

take_dentry_name_snapshot() takes a safe snapshot of dentry name;
if the name is a short one, it gets copied into caller-supplied
structure, otherwise an extra reference to external name is grabbed
(those are never modified).  In either case the pointer to stable
string is stored into the same structure.

dentry must be held by the caller of take_dentry_name_snapshot(),
but may be freely dropped afterwards - the snapshot will stay
until destroyed by release_dentry_name_snapshot().

Intended use:
struct name_snapshot s;

take_dentry_name_snapshot(&s, dentry);
...
access s.name
...
release_dentry_name_snapshot(&s);

Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name
to pass down with event.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi/watchdog: fix watchdog timeout set on reboot

commit 860f01e96981a68553f3ca49f574ff14fe955e72 upstream.

systemd by default starts watchdog on reboot and sets the timer to
ShutdownWatchdogSec=10min.  Reboot handler in ipmi_watchdog than reduces
the timer to 120s which is not enough time to boot a Xen machine with
a lot of RAM.  As a result the machine is rebooted the second time
during the long run of (XEN) Scrubbing Free RAM.....

Fix this by setting the timer to 120s only if it was previously
set to a low value.

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Fix the check for port number

commit 5a7a88f1b488e4ee49eb3d5b82612d4d9ffdf2c3 upstream.

The port number is only valid if IB_QP_PORT is set in the mask.
So only check port number if it is valid to prevent modify_qp from
failing due to an invalid port number.

Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds")
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/cgroup: Move sched_online_group() back into css_online() to fix crash

commit 96b777452d8881480fd5be50112f791c17db4b6b upstream.

Commit:

  2f5177f0fd7e ("sched/cgroup: Fix/cleanup cgroup teardown/init")

.. moved sched_online_group() from css_online() to css_alloc().
It exposes half-baked task group into global lists before initializing
generic cgroup stuff.

LTP testcase (third in cgroup_regression_test) written for testing
similar race in kernels 2.6.26-2.6.28 easily triggers this oops:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: kernfs_path_from_node_locked+0x260/0x320
  CPU: 1 PID: 30346 Comm: cat Not tainted 4.10.0-rc5-test #4
  Call Trace:
  ? kernfs_path_from_node+0x4f/0x60
  kernfs_path_from_node+0x3e/0x60
  print_rt_rq+0x44/0x2b0
  print_rt_stats+0x7a/0xd0
  print_cpu+0x2fc/0xe80
  ? __might_sleep+0x4a/0x80
  sched_debug_show+0x17/0x30
  seq_read+0xf2/0x3b0
  proc_reg_read+0x42/0x70
  __vfs_read+0x28/0x130
  ? security_file_permission+0x9b/0xc0
  ? rw_verify_area+0x4e/0xb0
  vfs_read+0xa5/0x170
  SyS_read+0x46/0xa0
  entry_SYSCALL_64_fastpath+0x1e/0xad

Here the task group is already linked into the global RCU-protected 'task_groups'
list, but the css->cgroup pointer is still NULL.

This patch reverts this chunk and moves online back to css_online().

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2f5177f0fd7e ("sched/cgroup: Fix/cleanup cgroup teardown/init")
Link: http://lkml.kernel.org/r/148655324740.424917.5302984537258726349.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mailbox: handle empty message in tx_tick

commit cb710ab1d8a23f68ff8f45aedf3e552bb90e70de upstream.

We already check if the message is empty before calling the client
tx_done callback. Calling completion on a wait event is also invalid
if the message is empty.

This patch moves the existing empty message check earlier.

Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mailbox: skip complete wait event if timer expired

commit cc6eeaa3029a6dbcb4ad41b1f92876483bd88965 upstream.

If a wait_for_completion_timeout() call returns due to a timeout,
complete() can get called after returning from the wait which is
incorrect and can cause subsequent transmissions on a channel to fail.
Since the wait_for_completion_timeout() sees the completion variable
is non-zero caused by the erroneous/spurious complete() call, and
it immediately returns without waiting for the time as expected by the
client.

This patch fixes the issue by skipping complete() call for the timer
expiry.

Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox")
Reported-by: Alexey Klimov <alexey.klimov@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mailbox: always wait in mbox_send_message for blocking Tx mode

commit c61b781ee084e69855477d23dd33e7e6caad652c upstream.

There exists a race when msg_submit return immediately as there was an
active request being processed which may have completed just before it's
checked again in mbox_send_message. This will result in return to the
caller without waiting in mbox_send_message even when it's blocking Tx.

This patch fixes the issue by waiting for the completion always if Tx
is in blocking mode.

Fixes: 2b6d83e2b8b7 ("mailbox: Introduce framework for mailbox")
Reported-by: Alexey Klimov <alexey.klimov@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Alexey Klimov <alexey.klimov@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wil6210: fix deadlock when using fw_no_recovery option

commit dfb5b098e0f40b68aa07f2ec55f4dd762efefbfa upstream.

When FW crashes with no_fw_recovery option, driver
waits for manual recovery with wil->mutex held, this
can easily create deadlocks.
Fix the problem by moving the wait outside the lock.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: fix null deref on wmi-tlv when trying spectral scan

commit 18ae68fff392e445af3c2d8be9bef8a16e1c72a7 upstream.

WMI ops wrappers did not properly check for null
function pointers for spectral scan. This caused
null dereference crash with WMI-TLV based firmware
which doesn't implement spectral scan.

The crash could be triggered with:

  ip link set dev wlan0 up
  echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl

The crash looked like this:

  [  168.031989] BUG: unable to handle kernel NULL pointer dereference at           (null)
  [  168.037406] IP: [<          (null)>]           (null)
  [  168.040395] PGD cdd4067 PUD fa0f067 PMD 0
  [  168.043303] Oops: 0010 [#1] SMP
  [  168.045377] Modules linked in: ath10k_pci(O) ath10k_core(O) ath mac80211 cfg80211 [last unloaded: cfg80211]
  [  168.051560] CPU: 1 PID: 1380 Comm: bash Tainted: G        W  O    4.8.0 #78
  [  168.054336] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
  [  168.059183] task: ffff88000c460c00 task.stack: ffff88000d4bc000
  [  168.061736] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
  ...
  [  168.100620] Call Trace:
  [  168.101910]  [<ffffffffa03b9566>] ? ath10k_spectral_scan_config+0x96/0x200 [ath10k_core]
  [  168.104871]  [<ffffffff811386e2>] ? filemap_fault+0xb2/0x4a0
  [  168.106696]  [<ffffffffa03b97e6>] write_file_spec_scan_ctl+0x116/0x280 [ath10k_core]
  [  168.109618]  [<ffffffff812da3a1>] full_proxy_write+0x51/0x80
  [  168.111443]  [<ffffffff811957b8>] __vfs_write+0x28/0x120
  [  168.113090]  [<ffffffff812f1a2d>] ? security_file_permission+0x3d/0xc0
  [  168.114932]  [<ffffffff8109b912>] ? percpu_down_read+0x12/0x60
  [  168.116680]  [<ffffffff811965f8>] vfs_write+0xb8/0x1a0
  [  168.118293]  [<ffffffff81197966>] SyS_write+0x46/0xa0
  [  168.119912]  [<ffffffff818f2972>] entry_SYSCALL_64_fastpath+0x1a/0xa4
  [  168.121737] Code:  Bad RIP value.
  [  168.123318] RIP  [<          (null)>]           (null)

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isdn/i4l: fix buffer overflow

commit 9f5af546e6acc30f075828cb58c7f09665033967 upstream.

This fixes a potential buffer overflow in isdn_net.c caused by an
unbounded strcpy.

[ ISDN seems to be effectively unmaintained, and the I4L driver in
  particular is long deprecated, but in case somebody uses this..
    - Linus ]

Signed-off-by: Jiten Thakkar <jitenmt@gmail.com>
Signed-off-by: Annie Cherkaev <annie.cherk@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isdn: Fix a sleep-in-atomic bug

commit e8f4ae85439f34bec3b0ab69223a41809dab28c9 upstream.

The driver may sleep under a spin lock, the function call path is:
isdn_ppp_mp_receive (acquire the lock)
  isdn_ppp_mp_reassembly
    isdn_ppp_push_higher
      isdn_ppp_decompress
        isdn_ppp_ccp_reset_trans
          isdn_ppp_ccp_reset_alloc_state
            kzalloc(GFP_KERNEL) --> may sleep

To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC".

Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: Do not perform software reset for Generic PHY

commit 0878fff1f42c18e448ab5b8b4f6a3eb32365b5b6 upstream.

The Generic PHY driver is a catch-all PHY driver and it should preserve
whatever prior initialization has been done by boot loader or firmware
agents. For specific PHY device configuration it is expected that a
specialized PHY driver would take over that role.

Resetting the generic PHY was a bad idea that has lead to several
complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore
the behavior prior to 87aa9f9c61ad ("net: phy: consolidate PHY
reset in phy_init_hw()").

Reported-by: Felix Fietkau <nbd@nbd.name>
Fixes: 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: fdp: fix NULL pointer dereference

commit b6355fb3f5f40bbce165847d277e64896cab8f95 upstream.

We are checking phy after dereferencing it. We can print the debug
information after checking it. If phy is NULL then we will get a good
stack trace to tell us that we are in this irq handler.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: Fix hangup of RC-S380* in port100_send_ack()

commit 2497128133f8169b24b928852ba6eae34fc495e5 upstream.

If port100_send_ack() was called twice or more, it has race to hangup.

  port100_send_ack()          port100_send_ack()
    init_completion()
    [...]
    dev->cmd_cancel = true
                                /* this removes previous from completion */
                                init_completion()
[...]
                                dev->cmd_cancel = true
                                wait_for_completion()
    /* never be waked up */
    wait_for_completion()

Like above race, this code is not assuming port100_send_ack() is
called twice or more.

To fix, this checks dev->cmd_cancel to know if prior cancel is
in-flight or not. And never be remove prior task from completion by
using reinit_completion(), so this guarantees to be waked up properly
soon or later.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smp/hotplug: Replace BUG_ON and react useful

commit dea1d0f5f1284e3defee4b8484d9fc230686cd42 upstream.

The move of the unpark functions to the control thread moved the BUG_ON()
there as well. While it made some sense in the idle thread of the upcoming
CPU, it's bogus to crash the control thread on the already online CPU,
especially as the function has a return value and the callsite is prepared
to handle an error return.

Replace it with a WARN_ON_ONCE() and return a proper error code.

Fixes: 9cd4f1a4e7a8 ("smp/hotplug: Move unparking of percpu threads to the control CPU")
Rightfully-ranted-at-by: Linux Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smp/hotplug: Move unparking of percpu threads to the control CPU

commit 9cd4f1a4e7a858849e889a081a99adff83e08e4c upstream.

Vikram reported the following backtrace:

   BUG: scheduling while atomic: swapper/7/0/0x00000002
   CPU: 7 PID: 0 Comm: swapper/7 Not tainted 4.9.32-perf+ #680
   schedule
   schedule_hrtimeout_range_clock
   schedule_hrtimeout
   wait_task_inactive
   __kthread_bind_mask
   __kthread_bind
   __kthread_unpark
   kthread_unpark
   cpuhp_online_idle
   cpu_startup_entry
   secondary_start_kernel

He analyzed correctly that a parked cpu hotplug thread of an offlined CPU
was still on the runqueue when the CPU came back online and tried to unpark
it. This causes the thread which invoked kthread_unpark() to call
wait_task_inactive() and subsequently schedule() with preemption disabled.
His proposed workaround was to "make sure" that a parked thread has
scheduled out when the CPU goes offline, so the situation cannot happen.

But that's still wrong because the root cause is not the fact that the
percpu thread is still on the runqueue and neither that preemption is
disabled, which could be simply solved by enabling preemption before
calling kthread_unpark().

The real issue is that the calling thread is the idle task of the upcoming
CPU, which is not supposed to call anything which might sleep.  The moron,
who wrote that code, missed completely that kthread_unpark() might end up
in schedule().

The solution is simpler than expected. The thread which controls the
hotplug operation is waiting for the CPU to call complete() on the hotplug
state completion. So the idle task of the upcoming CPU can set its state to
CPUHP_AP_ONLINE_IDLE and invoke complete(). This in turn wakes the control
task on a different CPU, which then can safely do the unpark and kick the
now unparked hotplug thread of the upcoming CPU to complete the bringup to
the final target state.

Control CPU                     AP

bringup_cpu();
  __cpu_up()  ------------>
bringup_ap();
  bringup_wait_for_ap()
    wait_for_completion();
                                cpuhp_online_idle();
                <------------    complete();
    unpark(AP->stopper);
    unpark(AP->hotplugthread);
                                while(1)
                                  do_idle();
    kick(AP->hotplugthread);
    wait_for_completion(); hotplug_thread()
  run_online_callbacks();
  complete();

Fixes: 8df3e07e7f21 ("cpu/hotplug: Let upcoming cpu bring itself fully up")
Reported-by: Vikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707042218020.2131@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: rcar-du: Simplify and fix probe error handling

commit 4f7b0d263833928e947e172eff2d2997179c5cb9 upstream.

It isn't safe to call drm_dev_unregister() without first initializing
mode setting with drm_mode_config_init(). This leads to a crash if
either IO memory can't be remapped or vblank initialization fails.

Fix this by reordering the initialization sequence. Move vblank
initialization after the drm_mode_config_init() call, and move IO
remapping before drm_dev_alloc() to avoid the need to perform clean up
in case of failure.

While at it remove the explicit drm_vblank_cleanup() call from
rcar_du_remove() as the drm_dev_unregister() function already cleans up
vblank.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: thongsyho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: comedi_fops: Avoid orphaned proc entry

commit bf279ece37d2a3eaaa9813fcd7a1d8a81eb29c20 upstream.

Move comedi_proc_init to the end to avoid orphaned proc entry
if module loading failed.

Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "powerpc/numa: Fix percpu allocations to be NUMA aware"

This reverts commit b4624ff952ec7d268a9651cd9184a1995befc271 which is
commit ba4a648f12f4cd0a8003dd229b6ca8a53348ee4b upstream.

Michal Hocko writes:

JFYI. We have encountered a regression after applying this patch on a
large ppc machine. While the patch is the right thing to do it doesn't
work well with the current vmalloc area size on ppc and large machines
where NUMA nodes are very far from each other. Just for the reference
the boot fails on such a machine with bunch of warning preceeding it.
See http://lkml.kernel.org/r/20170724134240.GL25221@dhcp22.suse.cz

It seems the right thing to do is to enlarge the vmalloc space on ppc
but this is not the case in the upstream kernel yet AFAIK. It is also
questionable whether that is a stable material but I will decision on
you here.

We have reverted this patch from our 4.4 based kernel.

Newer kernels do not have enlarged vmalloc space yet AFAIK so they won't
work properly eiter. This bug is quite rare though because you need a
specific HW configuration to trigger the issue - namely NUMA nodes have
to be far away from each other in the physical memory space.

Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Save/restore host values of debug registers

commit 7ceaa6dcd8c6f59588428cec37f3c8093dd1011f upstream.

At present, HV KVM on POWER8 and POWER9 machines loses any instruction
or data breakpoint set in the host whenever a guest is run.
Instruction breakpoints are currently only used by xmon, but ptrace
and the perf_event subsystem can set data breakpoints as well as xmon.

To fix this, we save the host values of the debug registers (CIABR,
DAWR and DAWRX) before entering the guest and restore them on exit.
To provide space to save them in the stack frame, we expand the stack
frame allocated by kvmppc_hv_entry() from 112 to 144 bytes.

[paulus@ozlabs.org - Adjusted stack offsets since we aren't saving
 POWER9-specific registers.]

Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08)
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit

commit 4c3bb4ccd074e1a0552078c0bf94c662367a1658 upstream.

This restores several special-purpose registers (SPRs) to sane values
on guest exit that were missed before.

TAR and VRSAVE are readable and writable by userspace, and we need to
save and restore them to prevent the guest from potentially affecting
userspace execution (not that TAR or VRSAVE are used by any known
program that run uses the KVM_RUN ioctl).  We save/restore these
in kvmppc_vcpu_run_hv() rather than on every guest entry/exit.

FSCR affects userspace execution in that it can prohibit access to
certain facilities by userspace.  We restore it to the normal value
for the task on exit from the KVM_RUN ioctl.

IAMR is normally 0, and is restored to 0 on guest exit.  However,
with a radix host on POWER9, it is set to a value that prevents the
kernel from executing user-accessible memory.  On POWER9, we save
IAMR on guest entry and restore it on guest exit to the saved value
rather than 0.  On POWER8 we continue to set it to 0 on guest exit.

PSPB is normally 0.  We restore it to 0 on guest exit to prevent
userspace taking advantage of the guest having set it non-zero
(which would allow userspace to set its SMT priority to high).

UAMOR is normally 0.  We restore it to 0 on guest exit to prevent
the AMR from being used as a covert channel between userspace
processes, since the AMR is not context-switched at present.

[paulus@ozlabs.org - removed IAMR bits that are only needed on POWER9]

Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08)
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/bar/gf100: fix access to upper half of BAR2

commit 38bcb208f60924a031b9f809f7cd252ea4a94e5f upstream.

Bit 30 being set causes the upper half of BAR2 to stay in physical mode,
mapped over the end of VRAM, even when the rest of the BAR has been set
to virtual mode.

We inherited our initial value from RM, but I'm not aware of any reason
we need to keep it that way.

This fixes severe GPU hang/lockup issues revealed by Wayland on F26.

Shout-out to NVIDIA for the quick response with the potential cause!

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/disp/nv50-: bump max chans to 21

commit a90e049cacd965dade4dae7263b4d3fd550e78b6 upstream.

GP102's cursors go from chan 17..20. Increase the array size to hold
their data properly.

Fixes: e50fcff15f ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices")
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Fix gcc-7.1.1 warning

commit fcfffdd8f98ac305285dca568b5065ef86be6458 upstream.

The current code does not look correct, and the reason for it is
probably lost.  Since this now generates a compiler warning,
fix it to what makes sense.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid5: add thread_group worker async_tx_issue_pending_all

commit 7e96d559634b73a8158ee99a7abece2eacec2668 upstream.

Since thread_group worker and raid5d kthread are not in sync, if
worker writes stripe before raid5d then requests will be waiting
for issue_pendig.

Issue observed when building raid5 with ext4, in some build runs
jbd2 would get hung and requests were waiting in the HW engine
waiting to be issued.

Fix this by adding a call to async_tx_issue_pending_all in the
raid5_do_work.

Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Enable TM before accessing TM registers

commit e47057151422a67ce08747176fa21cb3b526a2c9 upstream.

Commit 46a704f8409f ("KVM: PPC: Book3S HV: Preserve userspace HTM state
properly", 2017-06-15) added code to read transactional memory (TM)
registers but forgot to enable TM before doing so.  The result is
that if userspace does have live values in the TM registers, a KVM_RUN
ioctl will cause a host kernel crash like this:

[  181.328511] Unrecoverable TM Unavailable Exception f60 at d00000001e7d9980
[  181.328605] Oops: Unrecoverable TM Unavailable Exception, sig: 6 [#1]
[  181.328613] SMP NR_CPUS=2048
[  181.328613] NUMA
[  181.328618] PowerNV
[  181.328646] Modules linked in: vhost_net vhost tap nfs_layout_nfsv41_files rpcsec_gss_krb5 nfsv4 dns_resolver nfs
+fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat
+nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables
+ip6table_filter ip6_tables iptable_filter bridge stp llc kvm_hv kvm nfsd ses enclosure scsi_transport_sas ghash_generic
+auth_rpcgss gf128mul xts sg ctr nfs_acl lockd vmx_crypto shpchp ipmi_powernv i2c_opal grace ipmi_devintf i2c_core
+powernv_rng sunrpc ipmi_msghandler ibmpowernv uio_pdrv_genirq uio leds_powernv powernv_op_panel ip_tables xfs sd_mod
+lpfc ipr bnx2x libata mdio ptp pps_core scsi_transport_fc libcrc32c dm_mirror dm_region_hash dm_log dm_mod
[  181.329278] CPU: 40 PID: 9926 Comm: CPU 0/KVM Not tainted 4.12.0+ #1
[  181.329337] task: c000003fc6980000 task.stack: c000003fe4d80000
[  181.329396] NIP: d00000001e7d9980 LR: d00000001e77381c CTR: d00000001e7d98f0
[  181.329465] REGS: c000003fe4d837e0 TRAP: 0f60   Not tainted  (4.12.0+)
[  181.329523] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>
[  181.329527]   CR: 24022448  XER: 00000000
[  181.329608] CFAR: d00000001e773818 SOFTE: 1
[  181.329608] GPR00: d00000001e77381c c000003fe4d83a60 d00000001e7ef410 c000003fdcfe0000
[  181.329608] GPR04: c000003fe4f00000 0000000000000000 0000000000000000 c000003fd7954800
[  181.329608] GPR08: 0000000000000001 c000003fc6980000 0000000000000000 d00000001e7e2880
[  181.329608] GPR12: d00000001e7d98f0 c000000007b19000 00000001295220e0 00007fffc0ce2090
[  181.329608] GPR16: 0000010011886608 00007fff8c89f260 0000000000000001 00007fff8c080028
[  181.329608] GPR20: 0000000000000000 00000100118500a6 0000010011850000 0000010011850000
[  181.329608] GPR24: 00007fffc0ce1b48 0000010011850000 00000000d673b901 0000000000000000
[  181.329608] GPR28: 0000000000000000 c000003fdcfe0000 c000003fdcfe0000 c000003fe4f00000
[  181.330199] NIP [d00000001e7d9980] kvmppc_vcpu_run_hv+0x90/0x6b0 [kvm_hv]
[  181.330264] LR [d00000001e77381c] kvmppc_vcpu_run+0x2c/0x40 [kvm]
[  181.330322] Call Trace:
[  181.330351] [c000003fe4d83a60] [d00000001e773478] kvmppc_set_one_reg+0x48/0x340 [kvm] (unreliable)
[  181.330437] [c000003fe4d83b30] [d00000001e77381c] kvmppc_vcpu_run+0x2c/0x40 [kvm]
[  181.330513] [c000003fe4d83b50] [d00000001e7700b4] kvm_arch_vcpu_ioctl_run+0x114/0x2a0 [kvm]
[  181.330586] [c000003fe4d83bd0] [d00000001e7642f8] kvm_vcpu_ioctl+0x598/0x7a0 [kvm]
[  181.330658] [c000003fe4d83d40] [c0000000003451b8] do_vfs_ioctl+0xc8/0x8b0
[  181.330717] [c000003fe4d83de0] [c000000000345a64] SyS_ioctl+0xc4/0x120
[  181.330776] [c000003fe4d83e30] [c00000000000b004] system_call+0x58/0x6c
[  181.330833] Instruction dump:
[  181.330869] e92d0260 e9290b50 e9290108 792807e3 41820058 e92d0260 e9290b50 e9290108
[  181.330941] 792ae8a4 794a1f87 408204f4 e92d0260 <7d4022a6> f9490ff0 e92d0260 7d4122a6
[  181.331013] ---[ end trace 6f6ddeb4bfe92a92 ]---

The fix is just to turn on the TM bit in the MSR before accessing the
registers.

Fixes: 46a704f8409f ("KVM: PPC: Book3S HV: Preserve userspace HTM state properly")
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: authencesn - Fix digest_null crash

commit 41cdf7a45389e01991ee31e3301ed83cb3e3f7dc upstream.

When authencesn is used together with digest_null a crash will
occur on the decrypt path.  This is because normally we perform
a special setup to preserve the ESN, but this is skipped if there
is no authentication.  However, on the post-authentication path
it always expects the preservation to be in place, thus causing
a crash when digest_null is used.

This patch fixes this by also skipping the post-processing when
there is no authentication.

Fixes: 104880a6b470 ("crypto: authencesn - Convert to new AEAD...")
Reported-by: Jan Tluka <jtluka@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiter

commit b7dbcc0e433f0f61acb89ed9861ec996be4f2b38 upstream.

nfs4_retry_setlk() sets the task's state to TASK_INTERRUPTIBLE within the
same region protected by the wait_queue's lock after checking for a
notification from CB_NOTIFY_LOCK callback.  However, after releasing that
lock, a wakeup for that task may race in before the call to
freezable_schedule_timeout_interruptible() and set TASK_WAKING, then
freezable_schedule_timeout_interruptible() will set the state back to
TASK_INTERRUPTIBLE before the task will sleep.  The result is that the task
will sleep for the entire duration of the timeout.

Since we've already set TASK_INTERRUPTIBLE in the locked section, just use
freezable_schedule_timout() instead.

Fixes: a1d617d8f134 ("nfs: allow blocking locks to be awoken by lock callbacks")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: invalidate file size when taking a lock.

commit 442ce0499c0535f8972b68fa1fda357357a5c953 upstream.

Prior to commit ca0daa277aca ("NFS: Cache aggressively when file is open
for writing"), NFS would revalidate, or invalidate, the file size when
taking a lock.  Since that commit it only invalidates the file content.

If the file size is changed on the server while wait for the lock, the
client will have an incorrect understanding of the file size and could
corrupt data.  This particularly happens when writing beyond the
(supposed) end of file and can be easily be demonstrated with
posix_fallocate().

If an application opens an empty file, waits for a write lock, and then
calls posix_fallocate(), glibc will determine that the underlying
filesystem doesn't support fallocate (assuming version 4.1 or earlier)
and will write out a '0' byte at the end of each 4K page in the region
being fallocated that is after the end of the file.
NFS will (usually) detect that these writes are beyond EOF and will
expand them to cover the whole page, and then will merge the pages.
Consequently, NFS will write out large blocks of zeroes beyond where it
thought EOF was.  If EOF had moved, the pre-existing part of the file
will be over-written.  Locking should have protected against this,
but it doesn't.

This patch restores the use of nfs_zap_caches() which invalidated the
cached attributes.  When posix_fallocate() asks for the file size, the
request will go to the server and get a correct answer.

Fixes: ca0daa277aca ("NFS: Cache aggressively when file is open for writing")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pseries: Fix of_node_put() underflow during reconfig remove

commit 4fd1bd443e80b12f0a01a45fb9a793206b41cb72 upstream.

As for commit 68baf692c435 ("powerpc/pseries: Fix of_node_put()
underflow during DLPAR remove"), the call to of_node_put() must be
removed from pSeries_reconfig_remove_node().

dlpar_detach_node() and pSeries_reconfig_remove_node() both call
of_detach_node(), and thus the node should not be released in both
cases.

Fixes: 0829f6d1f69e ("of: device_node kobject lifecycle fixes")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Suspend lockup detectors before system halt

commit 56188832a50f09998cb570ba3771a1d25c193c0e upstream.

Some machines can't power off the machine, so disable the lockup detectors to
avoid this watchdog BUG to show up every few seconds:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [systemd-shutdow:1]

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Extend disabled preemption in copy_user_page

commit 56008c04ebc099940021b714da2d7779117cf6a7 upstream.

It's always bothered me that we only disable preemption in
copy_user_page around the call to flush_dcache_page_asm.
This patch extends this to after the copy.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Prevent TLB speculation on flushed pages on CPUs that only support equivalent aliases

commit ae7a609c34b6fb12328c553b5f9aab26ae74a28e upstream.

Helge noticed that we flush the TLB page in flush_cache_page but not in
flush_cache_range or flush_cache_mm.

For a long time, we have had random segmentation faults building
packages on machines with PA8800/8900 processors.  These machines only
support equivalent aliases.  We don't see these faults on machines that
don't require strict coherency.  So, it appears TLB speculation
sometimes leads to cache corruption on machines that require coherency.

This patch adds TLB flushes to flush_cache_range and flush_cache_mm when
coherency is required.  We only flush the TLB in flush_cache_page when
coherency is required.

The patch also optimizes flush_cache_range.  It turns out we always have
the right context to use flush_user_dcache_range_asm and
flush_user_icache_range_asm.

The patch has been tested for some time on rp3440, rp3410 and A500-44.
It's been boot tested on c8000.  No random segmentation faults were
observed during testing.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add missing NVIDIA GPU codec IDs to patch table

commit 74ec118152ea494a25ebb677cbc83a75c982ac5f upstream.

Add codec IDs for several recently released, pending, and historical
NVIDIA GPU audio controllers to the patch table, to allow the correct
patch functions to be selected for them.

Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: fm801: Initialize chip after IRQ handler is registered

commit 610e1ae9b533be82b3aa118b907e0a703256913d upstream.

The commit b56fa687e02b ("ALSA: fm801: detect FM-only card earlier")
rearranged initialization calls, i.e. it makes snd_fm801_chip_init() to
be called before we register interrupt handler and set PCI bus
mastering.

Somehow it prevents FM801-AU to work properly. Thus, partially revert
initialization order changed by commit mentioned above.

Fixes: b56fa687e02b ("ALSA: fm801: detect FM-only card earlier")
Reported-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Tested-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jfs: Don't clear SGID when inheriting ACLs

commit 9bcf66c72d726322441ec82962994e69157613e4 upstream.

When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.

Fix the problem by moving posix_acl_update_mode() out of
__jfs_set_acl() into jfs_set_acl(). That way the function will not be
called when inheriting ACLs which is what we want as it prevents SGID
bit clearing and the mode has been properly set by posix_acl_create()
anyway.

Fixes: 073931017b49d9458aa351605b43a7e34598caef
CC: jfs-discussion@lists.sourceforge.net
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: reduce skb_warn_bad_offload() noise

commit b2504a5dbef3305ef41988ad270b0e8ec289331c upstream.

Dmitry reported warnings occurring in __skb_gso_segment() [1]

All SKB_GSO_DODGY producers can allow user space to feed
packets that trigger the current check.

We could prevent them from doing so, rejecting packets, but
this might add regressions to existing programs.

It turns out our SKB_GSO_DODGY handlers properly set up checksum
information that is needed anyway when packets needs to be segmented.

By checking again skb_needs_check() after skb_mac_gso_segment(),
we should remove these pesky warnings, at a very minor cost.

With help from Willem de Bruijn

[1]
WARNING: CPU: 1 PID: 6768 at net/core/dev.c:2439 skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434
lo: caps=(0x000000a2803b7c69, 0x0000000000000000) len=138 data_len=0 gso_size=15883 gso_type=4 ip_summed=0
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 6768 Comm: syz-executor1 Not tainted 4.9.0 #5
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
 ffff8801c063ecd8 ffffffff82346bdf ffffffff00000001 1ffff100380c7d2e
 ffffed00380c7d26 0000000041b58ab3 ffffffff84b37e38 ffffffff823468f1
 ffffffff84820740 ffffffff84f289c0 dffffc0000000000 ffff8801c063ee20
Call Trace:
 [<ffffffff82346bdf>] __dump_stack lib/dump_stack.c:15 [inline]
 [<ffffffff82346bdf>] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
 [<ffffffff81827e34>] panic+0x1fb/0x412 kernel/panic.c:179
 [<ffffffff8141f704>] __warn+0x1c4/0x1e0 kernel/panic.c:542
 [<ffffffff8141f7e5>] warn_slowpath_fmt+0xc5/0x100 kernel/panic.c:565
 [<ffffffff8356cbaf>] skb_warn_bad_offload+0x2af/0x390 net/core/dev.c:2434
 [<ffffffff83585cd2>] __skb_gso_segment+0x482/0x780 net/core/dev.c:2706
 [<ffffffff83586f19>] skb_gso_segment include/linux/netdevice.h:3985 [inline]
 [<ffffffff83586f19>] validate_xmit_skb+0x5c9/0xc20 net/core/dev.c:2969
 [<ffffffff835892bb>] __dev_queue_xmit+0xe6b/0x1e70 net/core/dev.c:3383
 [<ffffffff8358a2d7>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3424
 [<ffffffff83ad161d>] packet_snd net/packet/af_packet.c:2930 [inline]
 [<ffffffff83ad161d>] packet_sendmsg+0x32ed/0x4d30 net/packet/af_packet.c:2955
 [<ffffffff834f0aaa>] sock_sendmsg_nosec net/socket.c:621 [inline]
 [<ffffffff834f0aaa>] sock_sendmsg+0xca/0x110 net/socket.c:631
 [<ffffffff834f329a>] ___sys_sendmsg+0x8fa/0x9f0 net/socket.c:1954
 [<ffffffff834f5e58>] __sys_sendmsg+0x138/0x300 net/socket.c:1988
 [<ffffffff834f604d>] SYSC_sendmsg net/socket.c:1999 [inline]
 [<ffffffff834f604d>] SyS_sendmsg+0x2d/0x50 net/socket.c:1995
 [<ffffffff84371941>] entry_SYSCALL_64_fastpath+0x1f/0xc2

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore: Make spinlock per zone instead of global

commit 109704492ef637956265ec2eb72ae7b3b39eb6f4 upstream.

Currently pstore has a global spinlock for all zones. Since the zones
are independent and modify different areas of memory, there's no need
to have a global lock, so we should use a per-zone lock as introduced
here. Also, when ramoops's ftrace use-case has a FTRACE_PER_CPU flag
introduced later, which splits the ftrace memory area into a single zone
per CPU, it will eliminate the need for locking. In preparation for this,
make the locking optional.

Signed-off-by: Joel Fernandes <joelaf@google.com>
[kees: updated commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

af_key: Add lock to key dump

commit 89e357d83c06b6fac581c3ca7f0ee3ae7e67109e upstream.

A dump may come in the middle of another dump, modifying its dump
structure members. This race condition will result in NULL pointer
dereference in kernel. So add a lock to prevent that race.

Fixes: 83321d6b9872 ("[AF_KEY]: Dump SA/SP entries non-atomically")
Signed-off-by: Yuejie Shi <syjcnss@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.40

alarmtimer: don't rate limit one-shot timers

Commit ff86bf0c65f1 ("alarmtimer: Rate limit periodic intervals") sets a
minimum bound on the alarm timer interval.  This minimum bound shouldn't
be applied if the interval is 0.  Otherwise, one-shot timers will be
converted into periodic ones.

Fixes: ff86bf0c65f1 ("alarmtimer: Rate limit periodic intervals")
Reported-by: Ben Fennema <fennema@google.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Cc: stable@vger.kernel.org
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix kmemleak in instance_rmdir

commit db9108e054700c96322b0f0028546aa4e643cf0b upstream.

Hit the kmemleak when executing instance_rmdir, it forgot releasing
mem of tracing_cpumask. With this fix, the warn does not appear any
more.

unreferenced object 0xffff93a8dfaa7c18 (size 8):
  comm "mkdir", pid 1436, jiffies 4294763622 (age 9134.308s)
  hex dump (first 8 bytes):
    ff ff ff ff ff ff ff ff                          ........
  backtrace:
    [<ffffffff88b6567a>] kmemleak_alloc+0x4a/0xa0
    [<ffffffff8861ea41>] __kmalloc_node+0xf1/0x280
    [<ffffffff88b505d3>] alloc_cpumask_var_node+0x23/0x30
    [<ffffffff88b5060e>] alloc_cpumask_var+0xe/0x10
    [<ffffffff88571ab0>] instance_mkdir+0x90/0x240
    [<ffffffff886e5100>] tracefs_syscall_mkdir+0x40/0x70
    [<ffffffff886565c9>] vfs_mkdir+0x109/0x1b0
    [<ffffffff8865b1d0>] SyS_mkdir+0xd0/0x100
    [<ffffffff88403857>] do_syscall_64+0x67/0x150
    [<ffffffff88b710e7>] return_from_SYSCALL_64+0x0/0x6a
    [<ffffffffffffffff>] 0xffffffffffffffff

Link: http://lkml.kernel.org/r/1500546969-12594-1-git-send-email-chuhu@redhat.com
Fixes: ccfe9e42e451 ("tracing: Make tracing_cpumask available for all instances")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present

commit 975e83cfb8dc16e7a2fdc58188c77c0c605876c2 upstream.

If the genpd->attach_dev or genpd->power_on fails, genpd_dev_pm_attach
may return -EPROBE_DEFER initially. However genpd_alloc_dev_data sets
the PM domain for the device unconditionally.

When subsequent attempts are made to call genpd_dev_pm_attach, it may
return -EEXISTS checking dev->pm_domain without re-attempting to call
attach_dev or power_on.

platform_drv_probe then attempts to call drv->probe as the return value
-EEXIST != -EPROBE_DEFER, which may end up in a situation where the
device is accessed without it's power domain switched on.

Fixes: f104e1e5ef57 (PM / Domains: Re-order initialization of generic_pm_domain_data)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: Don't clear SGID when inheriting ACLs

commit 6883cd7f68245e43e91e5ee583b7550abf14523f upstream.

When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.

Fix the problem by moving posix_acl_update_mode() out of
__reiserfs_set_acl() into reiserfs_set_acl(). That way the function will
not be called when inheriting ACLs which is what we want as it prevents
SGID bit clearing and the mode has been properly set by
posix_acl_create() anyway.

Fixes: 073931017b49d9458aa351605b43a7e34598caef
CC: reiserfs-devel@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spmi: Include OF based modalias in device uevent

commit d50daa2af2618dab6d21634e65a5fbcf4ae437d6 upstream.

Include the OF-based modalias in the uevent sent when registering SPMI
devices, so that user space has a chance to autoload the kernel module
for the device.

Tested-by: Rob Clark <robdclark@gmail.com>
Reported-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: device: Export of_device_{get_modalias, uvent_modalias} to modules

commit 7a3b7cd332db08546f3cdd984f11773e0d1999e7 upstream.

The ULPI bus can be built as a module, and it will soon be
calling these functions when it supports probing devices from DT.
Export them so they can be used by the ULPI module.

Acked-by: Rob Herring <robh@kernel.org>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

acpi/nfit: Fix memory corruption/Unregister mce decoder on failure

commit 7e700d2c59e5853c9126642976b4f5768f64c9b3 upstream.

nfit_init() calls nfit_mce_register() on module load.  When the module
load fails the nfit mce decoder is not unregistered.  The module's
memory is freed leaving the decoder chain referencing junk.  This will
cause panics as future registrations will reference the free'd memory.

Unregister the nfit mce decoder on module init failure.

[v2]: register and then unregister mce handler to avoid losing mce events
[v3]: also cleanup nfit workqueue

Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error")
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: "Lee, Chun-Yi" <joeyli.kernel@gmail.com>
Cc: Linda Knippers <linda.knippers@hpe.com>
Cc: lszubowi@redhat.com
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix random return value on mount

commit 8fc646b44385ff0a9853f6590497e43049eeb311 upstream.

On failure to prepare_creds(), mount fails with a random
return value, as err was last set to an integer cast of
a valid lower mnt pointer or set to 0 if inodes index feature
is enabled.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3fe6e52f0626 ("ovl: override creds with the ones from ...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hfsplus: Don't clear SGID when inheriting ACLs

commit 84969465ddc4f8aeb3b993123b571aa01c5f2683 upstream.

When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.

Fix the problem by creating __hfsplus_set_posix_acl() function that does
not call posix_acl_update_mode() and use it when inheriting ACLs. That
prevents SGID bit clearing and the mode has been properly set by
posix_acl_create() anyway.

Fixes: 073931017b49d9458aa351605b43a7e34598caef
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx5: Avoid that mlx5_ib_sg_to_klms() overflows the klms[] array

commit 99975cd4fda52974a767aa44fe0b1a8f74950d9d upstream.

ib_map_mr_sg() can pass an SG-list to .map_mr_sg() that is larger
than what fits into a single MR. .map_mr_sg() must not attempt to
map more SG-list elements than what fits into a single MR.
Hence make sure that mlx5_ib_sg_to_klms() does not write outside
the MR klms[] array.

Fixes: b005d3164713 ("mlx5: Add arbitrary sg list support")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mst: Avoid processing partially received up/down message transactions

commit 636c4c3e762b62aa93632c645ca65879285b16e3 upstream.

Currently we may process up/down message transactions containing
uninitialized data. This can happen if there was an error during the
reception of any message in the transaction, but we happened to receive
the last message correctly with the end-of-message flag set.

To avoid this abort the reception of the transaction when the first
error is detected, rejecting any messages until a message with the
start-of-message flag is received (which will start a new transaction).
This is also what the DP 1.4 spec 2.11.8.2 calls for in this case.

In addtion this also prevents receiving bogus transactions without the
first message with the the start-of-message flag set.

v2:
- unchanged
v3:
- git add the part that actually skips messages after an error in
  drm_dp_sideband_msg_build()

Cc: Dave Airlie <airlied@redhat.com>
Cc: Lyude <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719134632.13366-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()

commit 7f8b3987da54cb4d41ad2545cd4d7958b9a36bdf upstream.

In case of an unknown broadcast message is sent mstb will remain unset,
so check for this.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Lyude <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719114330.26540-3-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mst: Fix error handling during MST sideband message reception

commit 448421b5e93b9177c5698f0cf6f5e72d2995eeca upstream.

Handle any error due to partial reads, timeouts etc. to avoid parsing
uninitialized data subsequently. Also bail out if the parsing itself
fails.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Lyude <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170719114330.26540-2-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/core: Initialize port_num in qp_attr

commit a62ab66b13a0f9bcb17b7b761f6670941ed5cd62 upstream.

Initialize the port_num for iWARP in rdma_init_qp_attr.

Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds")
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: fix race in concurrent readdir

commit 84583cfb973c4313955c6231cc9cb3772d280b15 upstream.

For a large directory, program needs to issue multiple readdir
syscalls to get all dentries. When there are multiple programs
read the directory concurrently. Following sequence of events
can happen.

 - program calls readdir with pos = 2. ceph sends readdir request
   to mds. The reply contains N1 entries. ceph adds these N1 entries
   to readdir cache.
 - program calls readdir with pos = N1+2. The readdir is satisfied
   by the readdir cache, N2 entries are returned. (Other program
   calls readdir in the middle, which fills the cache)
 - program calls readdir with pos = N1+N2+2. ceph sends readdir
   request to mds. The reply contains N3 entries and it reaches
   directory end. ceph adds these N3 entries to the readdir cache
   and marks directory complete.

The second readdir call does not update fi->readdir_cache_idx.
ceph add the last N3 entries to wrong places.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ko2iblnd: check copy_from_iter/copy_to_iter return code

commit 566e1ce22e04426fa52328b2adcdf1df49acd98e upstream.

We now get a helpful warning for code that calls copy_{from,to}_iter
without checking the return value, introduced by commit aa28de275a24
("iov_iter/hardening: move object size checks to inlined part").

drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function 'kiblnd_send':
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1643:2: error: ignoring return value of 'copy_from_iter', declared with attribute warn_unused_result [-Werror=unused-result]
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c: In function 'kiblnd_recv':
drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c:1744:3: error: ignoring return value of 'copy_to_iter', declared with attribute warn_unused_result [-Werror=unused-result]

In case we get short copies here, we may get incorrect behavior.
I've added failure handling for both rx and tx now, returning
-EFAULT as expected.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: avoid conflicting vesafb

commit 740c433ec35187b45abe08bb6c45a321a791be8e upstream.

If vesafb is enabled in the config then /dev/fb0 is created by vesa
and this sm750 driver gets fb1, fb2. But we need to be fb0 and fb1 to
effectively work with xorg.
So if it has been alloted fb1, then try to remove the other fb0.

In the previous send, why #ifdef is used was asked.
https://lkml.org/lkml/2017/6/25/57

Answered at: https://lkml.org/lkml/2017/6/25/69
Also pasting here for reference.

'Did a quick research into "why".
The patch d8801e4df91e ("x86/PCI: Set IORESOURCE_ROM_SHADOW only for the
default VGA device") has started setting IORESOURCE_ROM_SHADOW in flags
for a default VGA device and that is being done only for x86.
And so, we will need that #ifdef to check IORESOURCE_ROM_SHADOW as that
needs to be checked only for a x86 and not for other arch.'

Signed-off-by: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix AO timer off-by-one regression

commit 15d5193104a457d5151840247e3bce561c42e3e9 upstream.

As reported by Éric Piel on the Comedi mailing list (see
<https://groups.google.com/forum/#!topic/comedi_list/ueZiR7vTLOU/discussion>),
the analog output asynchronous commands are running too fast with a
period 50 ns shorter than it should be.  This affects all boards with AO
command support that are supported by the "ni_pcimio", "ni_atmio", and
"ni_mio_cs" drivers.

This is a regression bug introduced by commit 080e6795cba3 ("staging:
comedi: ni_mio_common: Cleans up/clarifies ni_ao_cmd"), specifically,
this line in `ni_ao_cmd_set_update()`:

/* following line: N-1 per STC */
ni_stc_writel(dev, trigvar - 1, NISTC_AO_UI_LOADA_REG);

The `trigvar` variable value comes from a call to `ni_ns_to_timer()`
which converts a timer period in nanoseconds to a hardware divisor
value. The function already reduces the divisor by 1 as required by the
hardware, so the above line should not reduce it further by 1.  Fix it
by replacing `trigvar` by `trigvar - 1` in the above line, and remove
the misleading comment.

Reported-by: Éric Piel <piel@delmic.com>
Fixes: 080e6795cba3 ("staging: comedi: ni_mio_common: Cleans up/clarifies ni_ao_cmd")
Cc: Éric Piel <piel@delmic.com>
Cc: Spencer E. Olson <olsonse@umich.edu>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add TL-WN722N v2 support

commit 5a1d4c5dd4eb2f1f8a9b30e61762f3b3b564df70 upstream.

Add support for USB Device TP-Link TL-WN722N v2.
VendorID: 0x2357, ProductID: 0x010c

Signed-off-by: Michael Gugino <michael.gugino.2@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "perf/core: Drop kernel samples even though :u is specified"

commit 6a8a75f3235724c5941a33e287b2f98966ad14c5 upstream.

This reverts commit cc1582c231ea041fbc68861dfaf957eaf902b829.

This commit introduced a regression that broke rr-project, which uses sampling
events to receive a signal on overflow (but does not care about the contents
of the sample). These signals are critical to the correct operation of rr.

There's been some back and forth about how to fix it - but to not keep
applications in limbo queue up a revert.

Reported-by: Kyle Huey <me@kylehuey.com>
Acked-by: Kyle Huey <me@kylehuey.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20170628105600.GC5981@leverpostej
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target

commit 80f62589fa52f530cffc50e78c0b5a2ae572d61e upstream.

When the jump instruction is displayed at the row 0 in annotate view,
the arrow is broken. An example:

 16.86 │   ┌──je     82
  0.01 │      movsd  (%rsp),%xmm0
       │      movsd  0x8(%rsp),%xmm4
       │      movsd  0x8(%rsp),%xmm1
       │      movsd  (%rsp),%xmm3
       │      divsd  %xmm4,%xmm0
       │      divsd  %xmm3,%xmm1
       │      movsd  (%rsp),%xmm2
       │      addsd  %xmm1,%xmm0
       │      addsd  %xmm2,%xmm0
       │      movsd  %xmm0,(%rsp)
       │82:   sub    $0x1,%ebx
 83.03 │    ↑ jne    38
       │      add    $0x10,%rsp
       │      xor    %eax,%eax
       │      pop    %rbx
       │    ← retq

The patch increments the row number before checking with 0.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 944e1abed9e1 ("perf ui browser: Add method to draw up/down arrow line")
Link: http://lkml.kernel.org/r/1496901704-30275-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iser-target: Avoid isert_conn->cm_id dereference in isert_login_recv_done

commit fce50a2fa4e9c6e103915c351b6d4a98661341d6 upstream.

This patch fixes a NULL pointer dereference in isert_login_recv_done()
of isert_conn->cm_id due to isert_cma_handler() -> isert_connect_error()
resetting isert_conn->cm_id = NULL during a failed login attempt.

As per Sagi, we will always see the completion of all recv wrs posted
on the qp (given that we assigned a ->done handler), this is a FLUSH
error completion, we just don't get to verify that because we deref
NULL before.

The issue here, was the assumption that dereferencing the connection
cm_id is always safe, which is not true since:

    commit 4a579da2586bd3b79b025947ea24ede2bbfede62
    Author: Sagi Grimberg <sagig@mellanox.com>
    Date:   Sun Mar 29 15:52:04 2015 +0300

         iser-target: Fix possible deadlock in RDMA_CM connection error

As I see it, we have a direct reference to the isert_device from
isert_conn which is the one-liner fix that we actually need like
we do in isert_rdma_read_done() and isert_rdma_write_done().

Reported-by: Andrea Righi <righi.andrea@gmail.com>
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce

commit 1d6ef276594a781686058802996e09c8550fd767 upstream.

This patch addresses a COMPARE_AND_WRITE se_device->caw_sem leak,
that would be triggered during normal se_cmd shutdown or abort
via __transport_wait_for_tasks().

This would occur because target_complete_cmd() would catch this
early and do complete_all(&cmd->t_transport_stop_comp), but since
target_complete_ok_work() or target_complete_failure_work() are
never called to invoke se_cmd->transport_complete_callback(),
the COMPARE_AND_WRITE specific callbacks never release caw_sem.

To address this special case, go ahead and release caw_sem
directly from target_complete_cmd().

(Remove '&& success' from check, to release caw_sem regardless
 of scsi_status - nab)

Signed-off-by: Jiang Yi <jiangyilism@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Fix deadlock between writeback and udf_setsize()

commit f2e95355891153f66d4156bf3a142c6489cd78c6 upstream.

udf_setsize() called truncate_setsize() with i_data_sem held. Thus
truncate_pagecache() called from truncate_setsize() could lock a page
under i_data_sem which can deadlock as page lock ranks below
i_data_sem - e. g. writeback can hold page lock and try to acquire
i_data_sem to map a block.

Fix the problem by moving truncate_setsize() calls from under
i_data_sem. It is safe for us to change i_size without holding
i_data_sem as all the places that depend on i_size being stable already
hold inode_lock.

Fixes: 7e49b6f2480cb9a9e7322a91592e56a5c85361f5
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: only invalidate dentrys that are clearly invalid.

commit cc89684c9a265828ce061037f1f79f4a68ccd3f7 upstream.

Since commit bafc9b754f75 ("vfs: More precise tests in d_invalidate")
in v3.18, a return of '0' from ->d_revalidate() will cause the dentry
to be invalidated even if it has filesystems mounted on or it or on a
descendant.  The mounted filesystem is unmounted.

This means we need to be careful not to return 0 unless the directory
referred to truly is invalid.  So -ESTALE or -ENOENT should invalidate
the directory.  Other errors such a -EPERM or -ERESTARTSYS should be
returned from ->d_revalidate() so they are propagated to the caller.

A particular problem can be demonstrated by:

1/ mount an NFS filesystem using NFSv3 on /mnt
2/ mount any other filesystem on /mnt/foo
3/ ls /mnt/foo
4/ turn off network, or otherwise make the server unable to respond
5/ ls /mnt/foo &
6/ cat /proc/$!/stack # note that nfs_lookup_revalidate is in the call stack
7/ kill -9 $! # this results in -ERESTARTSYS being returned
8/ observe that /mnt/foo has been unmounted.

This patch changes nfs_lookup_revalidate() to only treat
  -ESTALE from nfs_lookup_verify_inode() and
  -ESTALE or -ENOENT from ->lookup()
as indicating an invalid inode.  Other errors are returned.

Also nfs_check_inode_attributes() is changed to return -ESTALE rather
than -EIO.  This is consistent with the error returned in similar
circumstances from nfs_update_inode().

As this bug allows any user to unmount a filesystem mounted on an NFS
filesystem, this fix is suitable for stable kernels.

Fixes: bafc9b754f75 ("vfs: More precise tests in d_invalidate")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunrpc: use constant time memory comparison for mac

commit 15a8b93fd5690de017ce665382ea45e5d61811a4 upstream.

Otherwise, we enable a MAC forgery via timing attack.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>