drm/mediatek: dsi: Add atomic {destroy,duplicate}_state, reset callbacks

[ Upstream commit eeda05b5e92f51d9a09646ecb493f0a1e872a6ef ]

Add callbacks for atomic_destroy_state, atomic_duplicate_state and
atomic_reset to restore functionality of the DSI driver: this solves
vblank timeouts when another bridge is present in the chain.

Tested bridge chain: DSI <=> ANX7625 => aux-bus panel

Fixes: 7f6335c6a258 ("drm/mediatek: Modify dsi funcs to atomic operations")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220721172727.14624-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Fix typo in lisense text for PX30.Core

[ Upstream commit 4a00c43818dcc19be97250d4c3c4a1e2f1ed4f9d ]

Fix the Amarula Solutions typo mistake in lisense text added
in Engicam PX30.Core SoM dtsi.

Fixes: d92a7c331f53c ("arm64: dts: rockchip: Add Engicam PX30.Core SOM")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220822103524.266731-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Pull up wlan wake# on Gru-Bob

[ Upstream commit e5467359a725de90b6b8d0dd865500f6373828ca ]

The Gru-Bob board does not have a pull-up resistor on its
WLAN_HOST_WAKE# pin, but Kevin does. The production/vendor kernel
specified the pin configuration correctly as a pull-up, but this didn't
get ported correctly to upstream.

This means Bob's WLAN_HOST_WAKE# pin is floating, causing inconsistent
wakeup behavior.

Note that bt_host_wake_l has a similar dynamic, but apparently the
upstream choice was to redundantly configure both internal and external
pull-up on Kevin (see the "Kevin has an external pull up" comment in
rk3399-gru.dtsi). This doesn't cause any functional problem, although
it's perhaps wasteful.

Fixes: 8559bbeeb849 ("arm64: dts: rockchip: add Google Bob")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220822164453.1.I75c57b48b0873766ec993bdfb7bc1e63da5a1637@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Fix the asynchronous reset requests

[ Upstream commit b75c83d9b961fd3abf7310f8d36d5e6e9f573efb ]

SCMI Reset protocol specification allows the asynchronous reset request
only when an autonomous reset action is specified. Reset requests based
on explicit assert/deassert of signals should not be served
asynchronously.

Current implementation will instead issue an asynchronous request in any
case, as long as the reset domain had advertised to support asynchronous
resets.

Avoid requesting the asynchronous resets when the reset action is not
of the autonomous type, even if the target reset domain does, in general,
support the asynchronous requests.

Link: https://lore.kernel.org/r/20220817172731.1185305-6-cristian.marussi@arm.com
Fixes: 95a15d80aa0d ("firmware: arm_scmi: Add RESET protocol in SCMI v2.0")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Harden accesses to the reset domains

[ Upstream commit e9076ffbcaed5da6c182b144ef9f6e24554af268 ]

Accessing reset domains descriptors by the index upon the SCMI drivers
requests through the SCMI reset operations interface can potentially
lead to out-of-bound violations if the SCMI driver misbehave.

Add an internal consistency check before any such domains descriptors
accesses.

Link: https://lore.kernel.org/r/20220817172731.1185305-5-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Stable-dep-of: b75c83d9b961 ("firmware: arm_scmi: Fix the asynchronous reset requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: validate inode fork size against fork format

[ Upstream commit 1eb70f54c445fcbb25817841e774adb3d912f3e8 ]

xfs_repair catches fork size/format mismatches, but the in-kernel
verifier doesn't, leading to null pointer failures when attempting
to perform operations on the fork. This can occur in the
xfs_dir_is_empty() where the in-memory fork format does not match
the size and so the fork data pointer is accessed incorrectly.

Note: this causes new failures in xfs/348 which is testing mode vs
ftype mismatches. We now detect a regular file that has been changed
to a directory or symlink mode as being corrupt because the data
fork is for a symlink or directory should be in local form when
there are only 3 bytes of data in the data fork. Hence the inode
verify for the regular file now fires w/ -EFSCORRUPTED because
the inode fork format does not match the format the corrupted mode
says it should be in.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: fix xfs_ifree() error handling to not leak perag ref

[ Upstream commit 6f5097e3367a7c0751e165e4c15bc30511a4ba38 ]

For some reason commit 9a5280b312e2e ("xfs: reorder iunlink remove
operation in xfs_ifree") replaced a jump to the exit path in the
event of an xfs_difree() error with a direct return, which skips
releasing the perag reference acquired at the top of the function.
Restore the original code to drop the reference on error.

Fixes: 9a5280b312e2e ("xfs: reorder iunlink remove operation in xfs_ifree")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfs: reorder iunlink remove operation in xfs_ifree

[ Upstream commit 9a5280b312e2e7898b6397b2ca3cfd03f67d7be1 ]

The O_TMPFILE creation implementation creates a specific order of
operations for inode allocation/freeing and unlinked list
modification. Currently both are serialised by the AGI, so the order
doesn't strictly matter as long as the are both in the same
transaction.

However, if we want to move the unlinked list insertions largely out
from under the AGI lock, then we have to be concerned about the
order in which we do unlinked list modification operations.
O_TMPFILE creation tells us this order is inode allocation/free,
then unlinked list modification.

Change xfs_ifree() to use this same ordering on unlinked list
removal. This way we always guarantee that when we enter the
iunlinked list removal code from this path, we already have the AGI
locked and we don't have to worry about lock nesting AGI reads
inside unlink list locks because it's already locked and attached to
the transaction.

We can do this safely as the inode freeing and unlinked list removal
are done in the same transaction and hence are atomic operations
with respect to log recovery.

Reported-by: Frank Hofmann <fhofmann@cloudflare.com>
Fixes: 298f7bec503f ("xfs: pin inode backing buffer to the inode log item")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmlinux.lds.h: CFI: Reduce alignment of jump-table to function alignment

commit 13b0566962914e167cb3238fbe29ced618f07a27 upstream.

Due to undocumented, hysterical raisins on x86, the CFI jump-table
sections in .text are needlessly aligned to PMD_SIZE in the vmlinux
linker script. When compiling a CFI-enabled arm64 kernel with a 64KiB
page-size, a PMD maps 512MiB of virtual memory and so the .text section
increases to a whopping 940MiB and blows the final Image up to 960MiB.
Others report a link failure.

Since the CFI jump-table requires only instruction alignment, reduce the
alignment directives to function alignment for parity with other parts
of the .text section. This reduces the size of the .text section for the
aforementioned 64KiB page size arm64 kernel to 19MiB for a much more
reasonable total Image size of 39MiB.

Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Mohan Rao .vanimina" <mailtoc.mohanrao@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/CAL_GTzigiNOMYkOPX1KDnagPhJtFNqSK=1USNbS0wUL4PW6-Uw@mail.gmail.com/
Fixes: cf68fffb66d6 ("add support for Clang CFI")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220922215715.13345-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: topology: fix possible overflow in amu_fie_setup()

commit d4955c0ad77dbc684fc716387070ac24801b8bca upstream.

cpufreq_get_hw_max_freq() returns max frequency in kHz as *unsigned int*,
while freq_inv_set_max_ratio() gets passed this frequency in Hz as 'u64'.
Multiplying max frequency by 1000 can potentially result in overflow --
multiplying by 1000ULL instead should avoid that...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Fixes: cd0ed03a8903 ("arm64: use activity monitors for frequency invariance")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/01493d64-2bce-d968-86dc-11a122a9c07d@omp.ru
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabled

commit 50b2d49bafa16e6311ab2da82f5aafc5f9ada99b upstream.

Inject #UD when emulating XSETBV if CR4.OSXSAVE is not set.  This also
covers the "XSAVE not supported" check, as setting CR4.OSXSAVE=1 #GPs if
XSAVE is not supported (and userspace gets to keep the pieces if it
forces incoherent vCPU state).

Add a comment to kvm_emulate_xsetbv() to call out that the CPU checks
CR4.OSXSAVE before checking for intercepts.  AMD'S APM implies that #UD
has priority (says that intercepts are checked before #GP exceptions),
while Intel's SDM says nothing about interception priority.  However,
testing on hardware shows that both AMD and Intel CPUs prioritize the #UD
over interception.

Fixes: 02d4160fbd76 ("x86: KVM: add xsetbv to the emulator")
Cc: stable@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220824033057.3576315-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: slub: fix flush_cpu_slab()/__free_slab() invocations in task context.

commit e45cc288724f0cfd497bb5920bcfa60caa335729 upstream.

Commit 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations
__free_slab() invocations out of IRQ context") moved all flush_cpu_slab()
invocations to the global workqueue to avoid a problem related
with deactivate_slab()/__free_slab() being called from an IRQ context
on PREEMPT_RT kernels.

When the flush_all_cpu_locked() function is called from a task context
it may happen that a workqueue with WQ_MEM_RECLAIM bit set ends up
flushing the global workqueue, this will cause a dependency issue.

 workqueue: WQ_MEM_RECLAIM nvme-delete-wq:nvme_delete_ctrl_work [nvme_core]
   is flushing !WQ_MEM_RECLAIM events:flush_cpu_slab
 WARNING: CPU: 37 PID: 410 at kernel/workqueue.c:2637
   check_flush_dependency+0x10a/0x120
 Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core]
 RIP: 0010:check_flush_dependency+0x10a/0x120[  453.262125] Call Trace:
 __flush_work.isra.0+0xbf/0x220
 ? __queue_work+0x1dc/0x420
 flush_all_cpus_locked+0xfb/0x120
 __kmem_cache_shutdown+0x2b/0x320
 kmem_cache_destroy+0x49/0x100
 bioset_exit+0x143/0x190
 blk_release_queue+0xb9/0x100
 kobject_cleanup+0x37/0x130
 nvme_fc_ctrl_free+0xc6/0x150 [nvme_fc]
 nvme_free_ctrl+0x1ac/0x2b0 [nvme_core]

Fix this bug by creating a workqueue for the flush operation with
the WQ_MEM_RECLAIM bit set.

Fixes: 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context")
Cc: <stable@vger.kernel.org>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/slub: fix to return errno if kmalloc() fails

commit 7e9c323c52b379d261a72dc7bd38120a761a93cd upstream.

In create_unique_id(), kmalloc(, GFP_KERNEL) can fail due to
out-of-memory, if it fails, return errno correctly rather than
triggering panic via BUG_ON();

kernel BUG at mm/slub.c:5893!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP

Call trace:
 sysfs_slab_add+0x258/0x260 mm/slub.c:5973
 __kmem_cache_create+0x60/0x118 mm/slub.c:4899
 create_cache mm/slab_common.c:229 [inline]
 kmem_cache_create_usercopy+0x19c/0x31c mm/slab_common.c:335
 kmem_cache_create+0x1c/0x28 mm/slab_common.c:390
 f2fs_kmem_cache_create fs/f2fs/f2fs.h:2766 [inline]
 f2fs_init_xattr_caches+0x78/0xb4 fs/f2fs/xattr.c:808
 f2fs_fill_super+0x1050/0x1e0c fs/f2fs/super.c:4149
 mount_bdev+0x1b8/0x210 fs/super.c:1400
 f2fs_mount+0x44/0x58 fs/f2fs/super.c:4512
 legacy_get_tree+0x30/0x74 fs/fs_context.c:610
 vfs_get_tree+0x40/0x140 fs/super.c:1530
 do_new_mount+0x1dc/0x4e4 fs/namespace.c:3040
 path_mount+0x358/0x914 fs/namespace.c:3370
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]
 __se_sys_mount fs/namespace.c:3568 [inline]
 __arm64_sys_mount+0x2f8/0x408 fs/namespace.c:3568

Cc: <stable@kernel.org>
Fixes: 81819f0fc8285 ("SLUB core")
Reported-by: syzbot+81684812ea68216e08c5@syzkaller.appspotmail.com
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mana: Add rmb after checking owner bits

commit 6fd2c68da55c552f86e401ebe40c4a619025ef69 upstream.

Per GDMA spec, rmb is necessary after checking owner_bits, before
reading EQ or CQ entries.

Add rmb in these two places to comply with the specs.

Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reported-by: Sinan Kaya <Sinan.Kaya@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1662928805-15861-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: flexcan: flexcan_mailbox_read() fix return value for drop = true

commit a09721dd47c8468b3f2fdd73f40422699ffe26dd upstream.

The following happened on an i.MX25 using flexcan with many packets on
the bus:

The rx-offload queue reached a length more than skb_queue_len_max. In
can_rx_offload_offload_one() the drop variable was set to true which
made the call to .mailbox_read() (here: flexcan_mailbox_read()) to
_always_ return ERR_PTR(-ENOBUFS) and drop the rx'ed CAN frame. So
can_rx_offload_offload_one() returned ERR_PTR(-ENOBUFS), too.

can_rx_offload_irq_offload_fifo() looks as follows:

|  while (1) {
|  skb = can_rx_offload_offload_one(offload, 0);
|  if (IS_ERR(skb))
|  continue;
|  if (!skb)
|  break;
|  ...
|  }

The flexcan driver wrongly always returns ERR_PTR(-ENOBUFS) if drop is
requested, even if there is no CAN frame pending. As the i.MX25 is a
single core CPU, while the rx-offload processing is active, there is
no thread to process packets from the offload queue. So the queue
doesn't get any shorter and this results is a tight loop.

Instead of always returning ERR_PTR(-ENOBUFS) if drop is requested,
return NULL if no CAN frame is pending.

Changes since v1: https://lore.kernel.org/all/20220810144536.389237-1-u.kleine-koenig@pengutronix.de
- don't break in can_rx_offload_irq_offload_fifo() in case of an error,
  return NULL in flexcan_mailbox_read() in case of no pending CAN frame
  instead

Fixes: 4e9c9484b085 ("can: rx-offload: Prepare for CAN FD support")
Link: https://lore.kernel.org/all/20220811094254.1864367-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org # v5.5
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kasan: call kasan_malloc() from __kmalloc_*track_caller()

commit 5373b8a09d6e037ee0587cb5d9fe4cc09077deeb upstream.

We were failing to call kasan_malloc() from __kmalloc_*track_caller()
which was causing us to sometimes fail to produce KASAN error reports
for allocations made using e.g. devm_kcalloc(), as the KASAN poison was
not being initialized. Fix it.

Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: <stable@vger.kernel.org> # 5.15
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: fix a nasty sigreturn bug...

commit 762df359aa5849e010ef04c3ed79d57588ce17d9 upstream.

riscv has an equivalent of arm bug fixed by 653d48b22166 ("arm: fix
really nasty sigreturn bug"); if signal gets caught by an interrupt that
hits when we have the right value in a0 (-513), *and* another signal
gets delivered upon sigreturn() (e.g. included into the blocked mask for
the first signal and posted while the handler had been running), the
syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are
in a syscall, after all) and a0 already restored to its original value
(-513, which happens to be -ERESTARTNOINTR) and assume that we need to
apply the usual syscall restart logics.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YxJEiSq%2FCGaL6Gm9@ZenIV/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully

commit 69bef19d6b9700e96285f4b4e28691cda3dcd0d1 upstream.

When running gpio test on nxp-ls1028 platform with below command
gpiomon --num-events=3 --rising-edge gpiochip1 25
There will be a warning trace as below:
Call trace:
free_irq+0x204/0x360
lineevent_free+0x64/0x70
gpio_ioctl+0x598/0x6a0
__arm64_sys_ioctl+0xb4/0x100
invoke_syscall+0x5c/0x130
......
el0t_64_sync+0x1a0/0x1a4
The reason of this issue is that calling request_threaded_irq()
function failed, and then lineevent_free() is invoked to release
the resource. Since the lineevent_state::irq was already set, so
the subsequent invocation of free_irq() would trigger the above
warning call trace. To fix this issue, set the lineevent_state::irq
after the IRQ register successfully.

Fixes: 468242724143 ("gpiolib: cdev: refactor lineevent cleanup into lineevent_free")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: mockup: Fix potential resource leakage when register a chip

commit 02743c4091ccfb246f5cdbbe3f44b152d5d12933 upstream.

If creation of software node fails, the locally allocated string
array is left unfreed. Free it on error path.

Fixes: 6fda593f3082 ("gpio: mockup: Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: mockup: fix NULL pointer dereference when removing debugfs

commit b7df41a6f79dfb18ba2203f8c5f0e9c0b9b57f68 upstream.

We now remove the device's debugfs entries when unbinding the driver.
This now causes a NULL-pointer dereference on module exit because the
platform devices are unregistered *after* the global debugfs directory
has been recursively removed. Fix it by unregistering the devices first.

Fixes: 303e6da99429 ("gpio: mockup: remove gpio debugfs when remove device")
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mt76: fix reading current per-tid starting sequence number for aggregation

commit c3a510e2b53785df31d882a773c4c0780b4c825f upstream.

The code was accidentally shifting register values down by tid % 32 instead of
(tid * field_size) % 32.

Cc: stable@vger.kernel.org
Fixes: a28bef561a5c ("mt76: mt7615: re-enable offloading of sequence number assignment")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826182329.18155-1-nbd@nbd.name
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: libstub: check Shim mode using MokSBStateRT

commit 5f56a74cc0a6d9b9f8ba89cea29cd7c4774cb2b1 upstream.

We currently check the MokSBState variable to decide whether we should
treat UEFI secure boot as being disabled, even if the firmware thinks
otherwise. This is used by shim to indicate that it is not checking
signatures on boot images. In the kernel, we use this to relax lockdown
policies.

However, in cases where shim is not even being used, we don't want this
variable to interfere with lockdown, given that the variable may be
non-volatile and therefore persist across a reboot. This means setting
it once will persistently disable lockdown checks on a given system.

So switch to the mirrored version of this variable, called MokSBStateRT,
which is supposed to be volatile, and this is something we can check.

Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: x86: Wipe setup_data on pure EFI boot

commit 63bf28ceb3ebbe76048c3fb2987996ca1ae64f83 upstream.

When booting the x86 kernel via EFI using the LoadImage/StartImage boot
services [as opposed to the deprecated EFI handover protocol], the setup
header is taken from the image directly, and given that EFI's LoadImage
has no Linux/x86 specific knowledge regarding struct bootparams or
struct setup_header, any absolute addresses in the setup header must
originate from the file and not from a prior loading stage.

Since we cannot generally predict where LoadImage() decides to load an
image (*), such absolute addresses must be treated as suspect: even if a
prior boot stage intended to make them point somewhere inside the
[signed] image, there is no way to validate that, and if they point at
an arbitrary location in memory, the setup_data nodes will not be
covered by any signatures or TPM measurements either, and could be made
to contain an arbitrary sequence of SETUP_xxx nodes, which could
interfere quite badly with the early x86 boot sequence.

(*) Note that, while LoadImage() does take a buffer/size tuple in
addition to a device path, which can be used to provide the image
contents directly, it will re-allocate such images, as the memory
footprint of an image is generally larger than the PE/COFF file
representation.

Cc: <stable@vger.kernel.org> # v5.10+
Link: https://lore.kernel.org/all/20220904165321.1140894-1-Jason@zx2c4.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Add support for Intel Maple Ridge single port controller

commit 14c7d905283744809e6b82efae2f490660a11cda upstream.

Add support for Maple Ridge discrete USB4 host controller from Intel
which has a single USB4 port (versus the already supported dual port
Maple Ridge USB4 host controller).

Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA

commit 91062e663b261815573ce00967b1895a99e668df upstream.

On some DWC3 controllers (e.g. Rockchip SoCs), the DWC3 core
doesn't support 64-bit DMA address width. In this case, this
driver should use the default 32-bit mask. Otherwise, the DWC3
controller will break if it runs on above 4GB physical memory
environment.

This patch reads the DWC_USB3_AWIDTH bits of GHWPARAMS0 which
used for the DMA address width, and only configure 64-bit DMA
mask if the DWC_USB3_AWIDTH is 64.

Fixes: 45d39448b4d0 ("usb: dwc3: support 64 bit DMA in platform driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/20220901083446.3799754-1-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: flexcop-usb: fix endpoint type check

commit 763679f0eeff0185fc431498849bbc1c24460875 upstream.

Commit d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint
type") tried to add an endpoint type sanity check for the single
isochronous endpoint but instead broke the driver by checking the wrong
descriptor or random data beyond the last endpoint descriptor.

Make sure to check the right endpoint descriptor.

Fixes: d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type")
Cc: Oliver Neukum <oneukum@suse.com>
Cc: stable@vger.kernel.org # 5.9
Reported-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220822151027.27026-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix hang during unmount when stopping a space reclaim worker

commit a362bb864b8db4861977d00bd2c3222503ccc34b upstream.

Often when running generic/562 from fstests we can hang during unmount,
resulting in a trace like this:

  Sep 07 11:52:00 debian9 unknown: run fstests generic/562 at 2022-09-07 11:52:00
  Sep 07 11:55:32 debian9 kernel: INFO: task umount:49438 blocked for more than 120 seconds.
  Sep 07 11:55:32 debian9 kernel:       Not tainted 6.0.0-rc2-btrfs-next-122 #1
  Sep 07 11:55:32 debian9 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  Sep 07 11:55:32 debian9 kernel: task:umount          state:D stack:    0 pid:49438 ppid: 25683 flags:0x00004000
  Sep 07 11:55:32 debian9 kernel: Call Trace:
  Sep 07 11:55:32 debian9 kernel:  <TASK>
  Sep 07 11:55:32 debian9 kernel:  __schedule+0x3c8/0xec0
  Sep 07 11:55:32 debian9 kernel:  ? rcu_read_lock_sched_held+0x12/0x70
  Sep 07 11:55:32 debian9 kernel:  schedule+0x5d/0xf0
  Sep 07 11:55:32 debian9 kernel:  schedule_timeout+0xf1/0x130
  Sep 07 11:55:32 debian9 kernel:  ? lock_release+0x224/0x4a0
  Sep 07 11:55:32 debian9 kernel:  ? lock_acquired+0x1a0/0x420
  Sep 07 11:55:32 debian9 kernel:  ? trace_hardirqs_on+0x2c/0xd0
  Sep 07 11:55:32 debian9 kernel:  __wait_for_common+0xac/0x200
  Sep 07 11:55:32 debian9 kernel:  ? usleep_range_state+0xb0/0xb0
  Sep 07 11:55:32 debian9 kernel:  __flush_work+0x26d/0x530
  Sep 07 11:55:32 debian9 kernel:  ? flush_workqueue_prep_pwqs+0x140/0x140
  Sep 07 11:55:32 debian9 kernel:  ? trace_clock_local+0xc/0x30
  Sep 07 11:55:32 debian9 kernel:  __cancel_work_timer+0x11f/0x1b0
  Sep 07 11:55:32 debian9 kernel:  ? close_ctree+0x12b/0x5b3 [btrfs]
  Sep 07 11:55:32 debian9 kernel:  ? __trace_bputs+0x10b/0x170
  Sep 07 11:55:32 debian9 kernel:  close_ctree+0x152/0x5b3 [btrfs]
  Sep 07 11:55:32 debian9 kernel:  ? evict_inodes+0x166/0x1c0
  Sep 07 11:55:32 debian9 kernel:  generic_shutdown_super+0x71/0x120
  Sep 07 11:55:32 debian9 kernel:  kill_anon_super+0x14/0x30
  Sep 07 11:55:32 debian9 kernel:  btrfs_kill_super+0x12/0x20 [btrfs]
  Sep 07 11:55:32 debian9 kernel:  deactivate_locked_super+0x2e/0xa0
  Sep 07 11:55:32 debian9 kernel:  cleanup_mnt+0x100/0x160
  Sep 07 11:55:32 debian9 kernel:  task_work_run+0x59/0xa0
  Sep 07 11:55:32 debian9 kernel:  exit_to_user_mode_prepare+0x1a6/0x1b0
  Sep 07 11:55:32 debian9 kernel:  syscall_exit_to_user_mode+0x16/0x40
  Sep 07 11:55:32 debian9 kernel:  do_syscall_64+0x48/0x90
  Sep 07 11:55:32 debian9 kernel:  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  Sep 07 11:55:32 debian9 kernel: RIP: 0033:0x7fcde59a57a7
  Sep 07 11:55:32 debian9 kernel: RSP: 002b:00007ffe914217c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  Sep 07 11:55:32 debian9 kernel: RAX: 0000000000000000 RBX: 00007fcde5ae8264 RCX: 00007fcde59a57a7
  Sep 07 11:55:32 debian9 kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000055b57556cdd0
  Sep 07 11:55:32 debian9 kernel: RBP: 000055b57556cba0 R08: 0000000000000000 R09: 00007ffe91420570
  Sep 07 11:55:32 debian9 kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
  Sep 07 11:55:32 debian9 kernel: R13: 000055b57556cdd0 R14: 000055b57556ccb8 R15: 0000000000000000
  Sep 07 11:55:32 debian9 kernel:  </TASK>

What happens is the following:

1) The cleaner kthread tries to start a transaction to delete an unused
   block group, but the metadata reservation can not be satisfied right
   away, so a reservation ticket is created and it starts the async
   metadata reclaim task (fs_info->async_reclaim_work);

2) Writeback for all the filler inodes with an i_size of 2K starts
   (generic/562 creates a lot of 2K files with the goal of filling
   metadata space). We try to create an inline extent for them, but we
   fail when trying to insert the inline extent with -ENOSPC (at
   cow_file_range_inline()) - since this is not critical, we fallback
   to non-inline mode (back to cow_file_range()), reserve extents, create
   extent maps and create the ordered extents;

3) An unmount starts, enters close_ctree();

4) The async reclaim task is flushing stuff, entering the flush states one
   by one, until it reaches RUN_DELAYED_IPUTS. There it runs all current
   delayed iputs.

   After running the delayed iputs and before calling
   btrfs_wait_on_delayed_iputs(), one or more ordered extents complete,
   and btrfs_add_delayed_iput() is called for each one through
   btrfs_finish_ordered_io() -> btrfs_put_ordered_extent(). This results
   in bumping fs_info->nr_delayed_iputs from 0 to some positive value.

   So the async reclaim task blocks at btrfs_wait_on_delayed_iputs() waiting
   for fs_info->nr_delayed_iputs to become 0;

5) The current transaction is committed by the transaction kthread, we then
   start unpinning extents and end up calling btrfs_try_granting_tickets()
   through unpin_extent_range(), since we released some space.
   This results in satisfying the ticket created by the cleaner kthread at
   step 1, waking up the cleaner kthread;

6) At close_ctree() we ask the cleaner kthread to park;

7) The cleaner kthread starts the transaction, deletes the unused block
   group, and then calls kthread_should_park(), which returns true, so it
   parks. And at this point we have the delayed iputs added by the
   completion of the ordered extents still pending;

8) Then later at close_ctree(), when we call:

       cancel_work_sync(&fs_info->async_reclaim_work);

   We hang forever, since the cleaner was parked and no one else can run
   delayed iputs after that, while the reclaim task is waiting for the
   remaining delayed iputs to be completed.

Fix this by waiting for all ordered extents to complete and running the
delayed iputs before attempting to stop the async reclaim tasks. Note that
we can not wait for ordered extents with btrfs_wait_ordered_roots() (or
other similar functions) because that waits for the BTRFS_ORDERED_COMPLETE
flag to be set on an ordered extent, but the delayed iput is added after
that, when doing the final btrfs_put_ordered_extent(). So instead wait for
the work queues used for executing ordered extent completion to be empty,
which works because we do the final put on an ordered extent at
btrfs_finish_ordered_io() (while we are in the unmount context).

Fixes: d6fd0ae25c6495 ("Btrfs: fix missing delayed iputs on unmount")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix hang during unmount when stopping block group reclaim worker

commit 8a1f1e3d1eecf9d2359a2709e276743a67e145db upstream.

During early unmount, at close_ctree(), we try to stop the block group
reclaim task with cancel_work_sync(), but that may hang if the block group
reclaim task is currently at btrfs_relocate_block_group() waiting for the
flag BTRFS_FS_UNFINISHED_DROPS to be cleared from fs_info->flags. During
unmount we only clear that flag later, after trying to stop the block
group reclaim task.

Fix that by clearing BTRFS_FS_UNFINISHED_DROPS before trying to stop the
block group reclaim task and after setting BTRFS_FS_CLOSING_START, so that
if the reclaim task is waiting on that bit, it will stop immediately after
being woken, because it sees the filesystem is closing (with a call to
btrfs_fs_closing()), and then returns immediately with -EINTR.

Fixes: 31e70e527806c5 ("btrfs: fix hang during unmount when block group reclaim task is running")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Check correct capability for sagaw determination

commit 154897807050c1161cb2660e502fc0470d46b986 upstream.

Check 5-level paging capability for 57 bits address width instead of
checking 1GB large page capability.

Fixes: 53fc7ad6edf2 ("iommu/vt-d: Correctly calculate sagaw value of IOMMU")
Cc: stable@vger.kernel.org
Reported-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com>
Link: https://lore.kernel.org/r/20220916071212.2223869-2-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop

commit 1885ff13d4c42910b37a0e3f7c2f182520f4eed1 upstream.

Just as with the 5570 (and the other Dell laptops), this enables the two
subwoofer speakers on the Dell Precision 5530 together with the main
ones, significantly increasing the audio quality. I've tested this
myself on a 5530 and can confirm it's working as expected.

Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for ASUS GA503R laptop

commit ba1f818053b0668a1ce2fe86b840e81b592cc560 upstream.

The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs
as early models and the G14, this includes bass speakers which are by
default mapped incorrectly to the 0x06 node.

Add a quirk to use the same DAC pairs as the G14.

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-4-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack

commit bc2c23549ccd7105eb6ff0d4f0ac519285628673 upstream.

Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack

[ Fixed the position in the quirk table by tiwai ]

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add pincfg for ASUS G513 HP jack

commit c611e659044168e7abcbae8ba1ea833521498fbb upstream.

Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack

[ Fixed the position in the quirk table by tiwai ]

Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915080921.35563-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Re-arrange quirk table entries

commit b16c8f229a58eaddfc58aab447253464abd3c85e upstream.

A few entries have been mistakenly inserted in wrong positions without
considering the SSID ordering.  Place them at right positions.

Fixes: b7557267c233 ("ALSA: hda/realtek: Add quirk for ASUS GA402")
Fixes: 94db9cc8f8fa ("ALSA: hda/realtek: Add quirk for ASUS GU603")
Fixes: 739d0959fbed ("ALSA: hda: Add quirk for ASUS Flow x13")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220915154724.31634-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptop

commit bdc9b7396f7d4d6533e70fd8d5472f505b5ef58f upstream.

The Dell Precision 5570 uses the same 4-speakers-on-ALC289 just like the
previous Precision 5560. I replicated that patch onto this one, and can
confirm that the audio is much better (the woofers are now working);
I've tested it on my Dell Precision 5570.

Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyGbWM5wEoFMbW2v@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for Huawei WRT-WX9

commit cbcdf8c4d35cd74aee8581eb2f0453e0ecab7b05 upstream.

Fixes headphone and headset microphone detection on Huawei WRT-WX9.

Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913054622.15979-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: add Intel 5 Series / 3400 PCI DID

commit 4d40ceef4745536289012670103c59264e0fb3ec upstream.

Handle 0x3b57 variant with same AZX_DCAPS_INTEL_PCH_NOPM
capabilities as 0x3b56. In practise this allow use of HDMI/DP
display audio via i915.

BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/2751
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220912183716.2126312-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/tegra: set depop delay for tegra

commit 3c4d8c24fb6c44f426e447b04800b0ed61a7b5ae upstream.

Reduce the suspend time by setting depop delay to 10ms for
tegra.

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220913053641.23299-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: core: Fix double-free at snd_card_new()

commit c3afa2a402d1ecefa59f88d55d9e765f52f75bd9 upstream.

During the code change to add the support for devres-managed card
instance, we put an explicit kfree(card) call at the error path in
snd_card_new().  This is needed for the early error path before the
card is initialized with the device, but is rather superfluous and
causes a double-free at the error path after the card instance is
initialized, as the destructor of the card object already contains a
kfree() call.

This patch fixes the double-free situation by removing the superfluous
kfree().  Meanwhile we need to call kfree() explicitly for the early
error path, so it's added there instead.

Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation")
Reported-by: Rondreis <linhaoguo86@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAB7eexL1zBnB636hwS27d-LdPYZ_R1-5fJS_h=ZbCWYU=UPWJg@mail.gmail.com
Link: https://lore.kernel.org/r/20220919123516.28222-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ALSA: usb-audio: Split endpoint setups for hw_params and prepare"

commit 79764ec772bc1346441ae1c4b1f3bd1991d634e8 upstream.

This reverts commit ff878b408a03bef5d610b7e2302702e16a53636e.

Unfortunately the recent fix seems bringing another regressions with
PulseAudio / pipewire, at least for Steinberg and MOTU devices.

As a temporary solution, do a straight revert.  The issue for Android
will be revisited again later by another different fix (if any).

Fixes: ff878b408a03 ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216500
Link: https://lore.kernel.org/r/20220920113929.25162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Quectel RM520N

commit d640c4cb8f2f933c0ca896541f9de7fb1ae245f4 upstream.

add support for Quectel RM520N which is based on Qualcomm SDX62 chip.

0x0801: DIAG + NMEA + AT + MODEM + RMNET

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0801 Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=RM520N-GL
S:  SerialNumber=384af524
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: jerry meng <jerry-meng@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Quectel BG95 0x0203 composition

commit f8f67eff6847f9b8d753fa029723bcc54296055a upstream.

Add support for the following Quectel BG95 composition:

0x0203: Diag + GNSS + Modem + ECM

usb-devices output:
T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0203 Rev= 0.00
S:  Manufacturer=Quectel, Incorporated
S:  Product=Quectel LPWA Module
S:  SerialNumber=71d3a21b
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Carl Yin <carl.yin@quectel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Fix RST error in hub.c

commit 766a96dc558385be735a370db867e302c8f22153 upstream.

A recent commit added an invalid RST expression to a kerneldoc comment
in hub.c.  The fix is trivial.

Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls")
Cc: <stable@vger.kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES

commit d7f06bdd6ee87fbefa05af5f57361d85e7715b11 upstream.

As PAGE_SIZE is unsigned long, -1 > PAGE_SIZE when NR_CPUS <= 3.
This leads to very large file sizes:

topology$ ls -l
total 0
-r--r--r-- 1 root root 18446744073709551615 Sep  5 11:59 core_cpus
-r--r--r-- 1 root root                 4096 Sep  5 11:59 core_cpus_list
-r--r--r-- 1 root root                 4096 Sep  5 10:58 core_id
-r--r--r-- 1 root root 18446744073709551615 Sep  5 10:10 core_siblings
-r--r--r-- 1 root root                 4096 Sep  5 11:59 core_siblings_list
-r--r--r-- 1 root root 18446744073709551615 Sep  5 11:59 die_cpus
-r--r--r-- 1 root root                 4096 Sep  5 11:59 die_cpus_list
-r--r--r-- 1 root root                 4096 Sep  5 11:59 die_id
-r--r--r-- 1 root root 18446744073709551615 Sep  5 11:59 package_cpus
-r--r--r-- 1 root root                 4096 Sep  5 11:59 package_cpus_list
-r--r--r-- 1 root root                 4096 Sep  5 10:58 physical_package_id
-r--r--r-- 1 root root 18446744073709551615 Sep  5 10:10 thread_siblings
-r--r--r-- 1 root root                 4096 Sep  5 11:59 thread_siblings_list

Adjust the inequality to catch the case when NR_CPUS is configured
to a small value.

Fixes: 7ee951acd31a ("drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: stable@vger.kernel.org
Cc: feng xiangjun <fengxj325@gmail.com>
Reported-by: feng xiangjun <fengxj325@gmail.com>
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20220906203542.1796629-1-pauld@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio"

[ Upstream commit fe0a2ac7c627b064c479ad0c3b25e531d342e048 ]

This reverts commit 8cb339f1c1f04baede9d54c1e40ac96247a6393b as it
throws up a bunch of sparse warnings as reported by the kernel test
robot.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202209020044.CX2PfZzM-lkp@intel.com
Fixes: 8cb339f1c1f0 ("usb: gadget: udc-xilinx: replace memcpy with memcpy_toio")
Cc: stable@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Piyush Mehta <piyush.mehta@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "usb: add quirks for Lenovo OneLink+ Dock"

[ Upstream commit 58bfe7d8e31014d7ce246788df99c56e3cfe6c68 ]

This reverts commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58.

The quirk does not work properly, more work is needed to determine what
should be done here.

Reported-by: Oliver Neukum <oneukum@suse.com>
Cc: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Cc: stable <stable@kernel.org>
Fixes: 3d5f70949f1b ("usb: add quirks for Lenovo OneLink+ Dock")
Link: https://lore.kernel.org/r/9a17ea86-079f-510d-e919-01bc53a6d09f@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc-xilinx: replace memcpy with memcpy_toio

[ Upstream commit 8cb339f1c1f04baede9d54c1e40ac96247a6393b ]

For ARM processor, unaligned access to device memory is not allowed.
Method memcpy does not take care of alignment.

USB detection failure with the unaligned address of memory access, with
below kernel crash. To fix the unaligned address the kernel panic issue,
replace memcpy with memcpy_toio method.

Kernel crash:
Unable to handle kernel paging request at virtual address ffff80000c05008a
Mem abort info:
  ESR = 0x96000061
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x21: alignment fault
Data abort info:
  ISV = 0, ISS = 0x00000061
  CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000143b000
[ffff80000c05008a] pgd=100000087ffff003, p4d=100000087ffff003,
pud=100000087fffe003, pmd=1000000800bcc003, pte=00680000a0010713
Internal error: Oops: 96000061 [#1] SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.19-xilinx-v2022.1 #1
Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __memcpy+0x30/0x260
lr : __xudc_ep0_queue+0xf0/0x110
sp : ffff800008003d00
x29: ffff800008003d00 x28: ffff800009474e80 x27: 00000000000000a0
x26: 0000000000000100 x25: 0000000000000012 x24: ffff000800bc8080
x23: 0000000000000001 x22: 0000000000000012 x21: ffff000800bc8080
x20: 0000000000000012 x19: ffff000800bc8080 x18: 0000000000000000
x17: ffff800876482000 x16: ffff800008004000 x15: 0000000000004000
x14: 00001f09785d0400 x13: 0103020101005567 x12: 0781400000000200
x11: 00000000c5672a10 x10: 00000000000008d0 x9 : ffff800009463cf0
x8 : ffff8000094757b0 x7 : 0201010055670781 x6 : 4000000002000112
x5 : ffff80000c05009a x4 : ffff000800a15012 x3 : ffff00080362ad80
x2 : 0000000000000012 x1 : ffff000800a15000 x0 : ffff80000c050088
Call trace:
 __memcpy+0x30/0x260
 xudc_ep0_queue+0x3c/0x60
 usb_ep_queue+0x38/0x44
 composite_ep0_queue.constprop.0+0x2c/0xc0
 composite_setup+0x8d0/0x185c
 configfs_composite_setup+0x74/0xb0
 xudc_irq+0x570/0xa40
 __handle_irq_event_percpu+0x58/0x170
 handle_irq_event+0x60/0x120
 handle_fasteoi_irq+0xc0/0x220
 handle_domain_irq+0x60/0x90
 gic_handle_irq+0x74/0xa0
 call_on_irq_stack+0x2c/0x60
 do_interrupt_handler+0x54/0x60
 el1_interrupt+0x30/0x50
 el1h_64_irq_handler+0x18/0x24
 el1h_64_irq+0x78/0x7c
 arch_cpu_idle+0x18/0x2c
 do_idle+0xdc/0x15c
 cpu_startup_entry+0x28/0x60
 rest_init+0xc8/0xe0
 arch_call_rest_init+0x10/0x1c
 start_kernel+0x694/0x6d4
 __primary_switched+0xa4/0xac

Fixes: 1f7c51660034 ("usb: gadget: Add xilinx usb2 device support")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220824071253.1261096-1-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: add quirks for Lenovo OneLink+ Dock

[ Upstream commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58 ]

The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers:
17ef:1018 upstream
17ef:1019 downstream

Those two controllers both have problems with some USB3.0 devices,
particularly self-powered ones. Typical error messages include:

  Timeout while waiting for setup device command
  device not accepting address X, error -62
  unable to enumerate USB device

By process of elimination the controllers themselves were identified as
the cause of the problem. Through trial and error the issue was solved
by using USB_QUIRK_RESET_RESUME for both chips.

Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220824191320.17883-1-jflf_kernel@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop

[ Upstream commit 040f2dbd2010c43f33ad27249e6dac48456f4d99 ]

Relocate the pullups_connected check until after it is ensured that there
are no runtime PM transitions.  If another context triggered the DWC3
core's runtime resume, it may have already enabled the Run/Stop.  Do not
re-run the entire pullup sequence again, as it may issue a core soft
reset while Run/Stop is already set.

This patch depends on
  commit 69e131d1ac4e ("usb: dwc3: gadget: Prevent repeat pullup()")

Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded")
Cc: stable <stable@kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220728020647.9377-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: Don't modify GEVNTCOUNT in pullup()

[ Upstream commit 8f8034f493b5eb1ad21ff392fd30c0cf9e71f73f ]

If the GEVNTCOUNT indicates events in the event buffer, the driver needs
to acknowledge them before the controller can halt. Simply let the
interrupt handler acknowledges the remaining event generated by the
controller while polling for DSTS.DEVCTLHLT. This avoids disabling irq
and taking care of race condition between the interrupt handlers and
pullup().

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ea306ec93c41ccafbdb5d16404ff3b6eca299613.1650593829.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: Refactor pullup()

[ Upstream commit 861c010a2ee1bc4a66d23f0da4aa22e75d8eaa24 ]

Move soft-disconnect sequence out of dwc3_gadget_pullup(). No
functional change here.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/4c0f259b17d95acaaa931f90276683a48a32fe22.1650593829.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: Prevent repeat pullup()

[ Upstream commit 69e131d1ac4e52a59ec181ab4f8aa8c48cd8fb64 ]

Don't do soft-disconnect if it's previously done. Likewise, don't do
soft-connect if the device is currently connected and running. It would
break normal operation.

Currently the caller of pullup() (udc's sysfs soft_connect) only checks
if it had initiated disconnect to prevent repeating soft-disconnect. It
doesn't check for soft-connect. To be safe, let's keep the check here
regardless whether the udc core is fixed.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1c1345bd66c97a9d32f77d63aaadd04b7b037143.1650593829.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: Issue core soft reset before enabling run/stop

[ Upstream commit 0066472de157439d58454f4a55786f1045ea5681 ]

It is recommended by the Synopsis databook to issue a DCTL.CSftReset
when reconnecting from a device-initiated disconnect routine.  This
resolves issues with enumeration during fast composition switching
cases, which result in an unknown device on the host.

Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220316011358.3057-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: Avoid starting DWC3 gadget during UDC unbind

[ Upstream commit 8217f07a50236779880f13e87f99224cd9117f83 ]

There is a race present where the DWC3 runtime resume runs in parallel
to the UDC unbind sequence.  This will eventually lead to a possible
scenario where we are enabling the run/stop bit, without a valid
composition defined.

Thread#1 (handling UDC unbind):
usb_gadget_remove_driver()
-->usb_gadget_disconnect()
  -->dwc3_gadget_pullup(0)
--> continue UDC unbind sequence
-->Thread#2 is running in parallel here

Thread#2 (handing next cable connect)
__dwc3_set_mode()
  -->pm_runtime_get_sync()
    -->dwc3_gadget_resume()
      -->dwc->gadget_driver is NOT NULL yet
      -->dwc3_gadget_run_stop(1)
      --> _dwc3gadget_start()
...

Fix this by tracking the pullup disable routine, and avoiding resuming
of the DWC3 gadget.  Once the UDC is re-binded, that will trigger the
pullup enable routine, which would handle enabling the DWC3 gadget.

Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20210917021852.2037-1-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: r8188eu: Add Rosewill USB-N150 Nano to device tables

[ Upstream commit e01f5c8d6af231b3b09e23c1fe8a4057cdcc4e42 ]

This device is reported as using the RTL8188EUS chip.

It has the improbable USB ID of 0bda:ffef, which normally would belong
to Realtek, but this ID works for the reporter.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220814175027.2689-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: r8188eu: Remove support for devices with 8188FU chipset (0bda:f179)

[ Upstream commit 6723b283c44a3fdf9f922ae9788aab38bd909211 ]

The new r8188eu driver doesn't actually support devices with vendor ID 0bda
and product ID f179[0][1][2], remove the ID so owners of these devices
don't have to blacklist the staging driver.

[0] https://github.com/lwfinger/rtl8188eu/issues/366#issuecomment-888511731
[1] https://github.com/lwfinger/rtl8188eu/issues/385
[2] https://github.com/lwfinger/rtl8188eu/issues/385#issuecomment-973013539

Cc: Larry Finger <Larry.Finger@lwfinger.net>
CC: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Candy Febriyanto <cfebriyanto@gmail.com>
Link: https://lore.kernel.org/r/YZaBTq9vlMaJDFz2@mainframe.localdomain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e01f5c8d6af2 ("staging: r8188eu: Add Rosewill USB-N150 Nano to device tables")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: make sure to init common IP before gmc

[ Upstream commit a8671493d2074950553da3cf07d1be43185ef6c6 ]

Move common IP init before GMC init so that HDP gets
remapped before GMC init which uses it.

This fixes the Unsupported Request error reported through
AER during driver load. The error happens as a write happens
to the remap offset before real remapping is done.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.

Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Separate vf2pf work item init from virt data exchange

[ Upstream commit 892deb48269c65376f3eeb5b4c032ff2c2979bd7 ]

We want to be able to call virt data exchange conditionally
after gmc sw init to reserve bad pages as early as possible.
Since this is a conditional call, we will need
to call it again unconditionally later in the init sequence.

Refactor the data exchange function so it can be
called multiple times without re-initializing the work item.

v2: Cleaned up the code. Kept the original call to init_exchange_data()
inside early init to initialize the work item, afterwards call
exchange_data() when needed.

Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed By: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.15.70

Link: https://lore.kernel.org/r/20220921153646.931277075@linuxfoundation.org
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/sigmatel: Fix unused variable warning for beep power change

commit 51bdc8bb82525cd70feb92279c8b7660ad7948dd upstream.

The newly added stac_check_power_status() caused a compile warning
when CONFIG_SND_HDA_INPUT_BEEP is disabled.  Fix it.

Fixes: 414d38ba8710 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()

commit 43626dade36fa74d3329046f4ae2d7fdefe401c6 upstream.

syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at
cpuset_attach() [1], for commit 4f7e7236435ca0ab ("cgroup: Fix
threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that
cpuset_attach() is also called from cgroup_attach_task_all().
Add cpus_read_lock() like what cgroup_procs_write_start() does.

Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e
Reported-by: syzbot <syzbot+29d3a3b4d86c8136ad9e@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SEV: add cache flush to solve SEV cache incoherency issues

commit 683412ccf61294d727ead4a73d97397396e69a6b upstream.

Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots).  Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.

Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.

KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.

Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.

Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[OP: adjusted KVM_X86_OP_OPTIONAL() -> KVM_X86_OP_NULL, applied
kvm_arch_guest_memory_reclaimed() call in kvm_set_memslot()]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Find dst with sk's xfrm policy not ctl_sk

commit e22aa14866684f77b4f6b6cae98539e520ddb731 upstream.

If we set XFRM security policy by calling setsockopt with option
IPV6_XFRM_POLICY, the policy will be stored in 'sock_policy' in 'sock'
struct. However tcp_v6_send_response doesn't look up dst_entry with the
actual socket but looks up with tcp control socket. This may cause a
problem that a RST packet is sent without ESP encryption & peer's TCP
socket can't receive it.
This patch will make the function look up dest_entry with actual socket,
if the socket has XFRM policy(sock_policy), so that the TCP response
packet via this function can be encrypted, & aligned on the encrypted
TCP socket.

Tested: We encountered this problem when a TCP socket which is encrypted
in ESP transport mode encryption, receives challenge ACK at SYN_SENT
state. After receiving challenge ACK, TCP needs to send RST to
establish the socket at next SYN try. But the RST was not encrypted &
peer TCP socket still remains on ESTABLISHED state.
So we verified this with test step as below.
[Test step]
1. Making a TCP state mismatch between client(IDLE) & server(ESTABLISHED).
2. Client tries a new connection on the same TCP ports(src & dst).
3. Server will return challenge ACK instead of SYN,ACK.
4. Client will send RST to server to clear the SOCKET.
5. Client will retransmit SYN to server on the same TCP ports.
[Expected result]
The TCP connection should be established.

Cc: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Sehee Lee <seheele@google.com>
Signed-off-by: Sewook Seo <sewookseo@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write

[ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ]

In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of
type int.  Then, copy_from_user() may cause a heap overflow because it is used
as the third argument of copy_from_user().

Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mksysmap: Fix the mismatch of 'L0' symbols in System.map

[ Upstream commit c17a2538704f926ee4d167ba625e09b1040d8439 ]

When System.map was generated, the kernel used mksysmap to filter the
kernel symbols, we need to filter "L0" symbols in LoongArch architecture.

$ cat System.map | grep L0
9000000000221540 t L0

The L0 symbol exists in System.map, but not in .tmp_System.map. When
"cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms
data" error message in link-vmlinux.sh script.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panfrost: devfreq: set opp to the recommended one to configure regulator

[ Upstream commit d76034a427a2660b080bc155e4fd8f6393eefb48 ]

Enabling panfrost GPU OPP with dynamic regulator will make OPP
responsible to enable and configure it.

Unfortunately OPP configure and enable the regulator when an OPP
is asked to be set, which is not the case during
panfrost_devfreq_init().

This leave the regulator unconfigured and if no GPU load is
triggered, no OPP is asked to be set which make the regulator framework
switching it off during regulator_late_cleanup() without
noticing and therefore make the board hang as any access to GPU
memory space make bus locks up.

Call dev_pm_opp_set_opp() with the recommend OPP in
panfrost_devfreq_init() to enable the regulator, this will properly
configure and enable the regulator and will avoid any switch off
by regulator_late_cleanup().

Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906153034.153321-5-peron.clem@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()

[ Upstream commit ba912afbd611d3a5f22af247721a071ad1d5b9e0 ]

For irq_domain_associate() to work the virq descriptor has to be
pre-allocated in advance. Otherwise the following happens:

WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8
error: virq128 is not allocated
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1
        ...
Call Trace:
[<ffffffff801344c4>] show_stack+0x9c/0x130
[<ffffffff80769550>] dump_stack+0x90/0xd0
[<ffffffff801576d0>] __warn+0x118/0x130
[<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70
[<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8
[<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c
[<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388
[<ffffffff80a452cc>] init_IRQ+0x4c/0xf4
[<ffffffff80a3cc00>] start_kernel+0x404/0x698

Use irq_alloc_desc_at() to avoid the above problem.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Return -EAGAIN, not -EREMOTEIO, when a file already locked

[ Upstream commit 0066f1b0e27556381402db3ff31f85d2a2265858 ]

When trying to get a file lock on an AFS file, the server may return
UAEAGAIN to indicate that the lock is already held.  This is currently
translated by the default path to -EREMOTEIO.

Translate it instead to -EAGAIN so that we know we can retry it.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey E Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166075761334.3533338.2591992675160918098.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: qmi_wwan: add Quectel RM520N

[ Upstream commit e1091e226a2bab4ded1fe26efba2aee1aab06450 ]

add support for Quectel RM520N which is based on Qualcomm SDX62 chip.

0x0801: DIAG + NMEA + AT + MODEM + RMNET

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0801 Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=RM520N-GL
S:  SerialNumber=384af524
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: jerry.meng <jerry-meng@foxmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/tegra: Align BDL entry to 4KB boundary

[ Upstream commit 8d44e6044a0e885acdd01813768a0b27906d64fd ]

AZA HW may send a burst read/write request crossing 4K memory boundary.
The 4KB boundary is not guaranteed by Tegra HDA HW. Make SW change to
include the flag AZX_DCAPS_4K_BDLE_BOUNDARY to align BDLE to 4K
boundary.

Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220905172420.3801-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/sigmatel: Keep power up while beep is enabled

[ Upstream commit 414d38ba871092aeac4ed097ac4ced89486646f7 ]

It seems that the beep playback doesn't work well on IDT codec devices
when the codec auto-pm is enabled.  Keep the power on while the beep
switch is enabled.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1200544
Link: https://lore.kernel.org/r/20220904072750.26164-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211_hwsim: check length for virtio packets

[ Upstream commit 8c0427842aaef161a38ac83b7e8d8fe050b4be04 ]

An invalid packet with a length shorter than the specified length in the
netlink header can lead to use-after-frees and slab-out-of-bounds in the
processing of the netlink attributes, such as the following:

  BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010
  Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12

  Workqueue: events hwsim_virtio_rx_work
  Call Trace:
   <TASK>
   dump_stack_lvl+0x45/0x5d
   print_report.cold+0x5e/0x5e5
   kasan_report+0xb1/0x1c0
   __nla_validate_parse+0x1258/0x2010
   __nla_parse+0x22/0x30
   hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0
   hwsim_virtio_rx_work+0x1b2/0x370
   process_one_work+0x8df/0x1530
   worker_thread+0x575/0x11a0
   kthread+0x29d/0x340
   ret_from_fork+0x22/0x30
 </TASK>

Discarding packets with an invalid length solves this.
Therefore, skb->len must be set at reception.

Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix calc of resend age

[ Upstream commit 214a9dc7d852216e83acac7b75bc18f01ce184c2 ]

Fix the calculation of the resend age to add a microsecond value as
microseconds, not nanoseconds.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix local destruction being repeated

[ Upstream commit d3d863036d688313f8d566b87acd7d99daf82749 ]

If the local processor work item for the rxrpc local endpoint gets requeued
by an event (such as an incoming packet) between it getting scheduled for
destruction and the UDP socket being closed, the rxrpc_local_destroyer()
function can get run twice.  The second time it can hang because it can end
up waiting for cleanup events that will never happen.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Return DID_TRANSPORT_DISRUPTED instead of DID_REQUEUE

[ Upstream commit c0a50cd389c3ed54831e240023dd12bafa56b3a6 ]

When the driver hits an internal error condition returning DID_REQUEUE the
I/O will be retried on the same ITL nexus.  This will inhibit multipathing,
resulting in endless retries even if the error could have been resolved by
using a different ITL nexus.  Return DID_TRANSPORT_DISRUPTED to allow for
multipath to engage and route I/O to another ITL nexus.

Link: https://lore.kernel.org/r/20220824060033.138661-1-hare@suse.de
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()

[ Upstream commit 78e1e867f44e6bdc72c0e6a2609a3407642fb30b ]

The pfuze_chip::regulator_descs is an array of size
PFUZE100_MAX_REGULATOR, the pfuze_chip::pfuze_regulators
is the pointer to the real regulators of a specific device.
The number of real regulator is supposed to be less than
the PFUZE100_MAX_REGULATOR, so we should use the size of
'regulator_num * sizeof(struct pfuze_regulator)' in memcpy().
This fixes the out of bounds access bug reported by KASAN.

Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20220825111922.1368055-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: nau8824: Fix semaphore unbalance at error paths

[ Upstream commit 5628560e90395d3812800a8e44a01c32ffa429ec ]

The semaphore of nau8824 wasn't properly unlocked at some error
handling code paths, hence this may result in the unbalance (and
potential lock-up).  Fix them to handle the semaphore up properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: juno: Add missing MHU secure-irq

[ Upstream commit 422ab8fe15e30066d4c8e236b747c77069bfca45 ]

The MHU secure interrupt exists physically but is missing in the DT node.

Specify the interrupt in DT node to fix a warning on Arm Juno board:
   mhu@2b1f0000: interrupts: [[0, 36, 4], [0, 35, 4]] is too short

Link: https://lore.kernel.org/r/20220801141005.599258-1-jassisinghbrar@gmail.com
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: i740fb: Error out if 'pixclock' equals zero

commit 15cf0b82271b1823fb02ab8c377badba614d95d5 upstream.

The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.

Fix this by checking whether 'pixclock' is zero in the function
i740fb_check_var().

The following log reveals it:

divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:i740fb_decode_var drivers/video/fbdev/i740fb.c:444 [inline]
RIP: 0010:i740fb_set_par+0x272f/0x3bb0 drivers/video/fbdev/i740fb.c:739
Call Trace:
    fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1036
    do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1112
    fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1191
    vfs_ioctl fs/ioctl.c:51 [inline]
    __do_sys_ioctl fs/ioctl.c:874 [inline]

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Stefan Ghinea <stefan.ghinea@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: remove inaccurate mmap_assert_locked()

Acquiring the mmap_lock during exit_mmap() was only added recently in
v5.17 by commit 64591e8605d6 ("mm: protect free_pgtables with mmap_lock
write lock in exit_mmap"). Soon after, asserts for holding this lock
were added to the binder_alloc_set_vma() callback by the following two
fix commits in mainline: commit b0cab80ecd54 ("android: binder: fix
lockdep check on clearing vma") and commit a43cfc87caaf ("android:
binder: stop saving a pointer to the VMA").

These two fix commits were picked for stable trees including v5.15 were
unfortunately the mmap_lock is not held during exit_mmap() yet and this
unmet dependency leads to the following BUG report:

  ------------[ cut here ]------------
  kernel BUG at include/linux/mmap_lock.h:156!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 3 PID: 437 Comm: binder Not tainted 5.15.68 #5
  Hardware name: linux,dummy-virt (DT)
  pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : binder_alloc_vma_close+0x6c/0x70
  lr : binder_alloc_vma_close+0x6c/0x70
  sp : ffff800008687a70
  x29: ffff800008687a70 x28: ffff02a7ccf89d00 x27: ffff02a7c92f99e8
  x26: 000000000000012a x25: ffff02a7c6284740 x24: ffff02a7ccf8a360
  x23: ffff02a7c92f9980 x22: 1ffff000010d0f6c x21: ffff02a7c92f99e8
  x20: ffff02a7c92f9980 x19: ffff02a7d16b79a8 x18: 0000ffffe1702d20
  x17: 3334373239343932 x16: 34206e6163735f74 x15: 78656e5f616d756e
  x14: 0a30303030303030 x13: 7366666f5f6e6163 x12: ffff60550564a12b
  x11: 1fffe0550564a12a x10: ffff60550564a12a x9 : dfff800000000000
  x8 : ffff02a82b250957 x7 : 0000000000000001 x6 : ffff60550564a12a
  x5 : ffff02a82b250950 x4 : dfff800000000000 x3 : 0000000000000000
  x2 : 0000000000000000 x1 : ffff02a7ccf89d00 x0 : 0000000000000374
  Call trace:
   binder_alloc_vma_close+0x6c/0x70
   binder_vma_close+0x38/0xf4
   remove_vma+0x4c/0x94
   exit_mmap+0x14c/0x2bc
   __mmput+0x70/0x19c
   mmput+0x68/0x80
   do_exit+0x484/0xeb0
   do_group_exit+0x5c/0x100
   [...]

This patch removes the inaccurate assert specifically from v5.15 since
it's the only release with such issue. Note the mmap_lock is technically
not needed here as the mm->mm_users has dropped to zero at this point.
More context: https://lore.kernel.org/all/YxpQaio7xm3z9TUw@google.com/.

Fixes: b0cab80ecd54 ("android: binder: fix lockdep check on clearing vma")
Fixes: a43cfc87caaf ("android: binder: stop saving a pointer to the VMA")
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org> # v5.15
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega

commit e3163bc8ffdfdb405e10530b140135b2ee487f89 upstream.

This mirrors what we do for other asics and this way we are
sure the sdma doorbell range is properly initialized.

There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized.  However, the statement says that it applies to
multimedia as well, but the VCN code currently initializes
doorbells after GFX and there are no known issues there.  In my
testing at least I don't see any problems on SDMA.

This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.

Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega

commit dc1d85cb790f2091eea074cee24a704b2d6c4a06 upstream.

This mirrors what we do for other asics and this way we are
sure the ih doorbell range is properly initialized.

There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized.  In this case IH is initialized before GFX,
so there should be no issue.

This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.

Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Don't enable LTR if not supported

commit 6c20490663553cd7e07d8de8af482012329ab9d6 upstream.

As per PCIE Base Spec r4.0 Section 6.18
'Software must not enable LTR in an Endpoint unless the Root Complex
and all intermediate Switches indicate support for LTR.'

This fixes the Unsupported Request error reported through AER during
ASPM enablement.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.

Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")

Reported-by: Gustaw Smolarczyk <wielkiegie@gmail.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa

commit 95363747a6f39e88a3052fcf6ce6237769495ce0 upstream.

tools/include/uapi/asm/errno.h currently attempts to include
non-existent arch-specific errno.h header for xtensa.
Remove this case so that <asm-generic/errno.h> is used instead,
and add the missing arch-specific header for parisc.

References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=ia64&ver=5.8.3-1%7Eexp1&stamp=1598340829&raw=1
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Cc: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Allow CONFIG_64BIT with ARCH=parisc

commit 805ce8614958c925877ba6b6dc26cdf9f8800474 upstream.

The previous patch triggered a build failure for the debian kernel,
which has CONFIG_64BIT enabled, uses the CROSS_COMPILER environment
variable and uses ARCH=parisc to configure the kernel for 64-bit
support.

This patch weakens the previous patch while keeping the recommended way
to configure the kernel with:
    ARCH=parisc     -> build 32-bit kernel
    ARCH=parisc64   -> build 64-bit kernel
while adding the possibility for debian to configure a 64-bit kernel
even if ARCH=parisc is set (PA8X00 CPU has to be selected and
CONFIG_64BIT needs to be enabled).

The downside of this patch is, that we now have a small window open
again where people may get it wrong: if they enable CONFIG_64BIT and try
to compile with a 32-bit compiler.

Fixes: 3dcfb729b5f4 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # 5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: always initialize struct msghdr smb_msg completely

commit bedc8f76b3539ac4f952114b316bcc2251e808ce upstream.

So far we were just lucky because the uninitialized members
of struct msghdr are not used by default on a SOCK_STREAM tcp
socket.

But as new things like msg_ubuf and sg_from_iter where added
recently, we should play on the safe side and avoid potention
problems in future.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: don't send down the destination address to sendmsg for a SOCK_STREAM

commit 17d3df38dc5f4cec9b0ac6eb79c1859b6e2693a4 upstream.

This is ignored anyway by the tcp layer.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: revalidate mapping when doing direct writes

commit 7500a99281dfed2d4a84771c933bcb9e17af279b upstream.

Kernel bugzilla: 216301

When doing direct writes we need to also invalidate the mapping in case
we have a cached copy of the affected page(s) in memory or else
subsequent reads of the data might return the old/stale content
before we wrote an update to the server.

Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/device: Fix up of_dma_configure_id() stub

commit 40bfe7a86d84cf08ac6a8fe2f0c8bf7a43edd110 upstream.

Since the stub version of of_dma_configure_id() was added in commit
a081bd4af4ce ("of/device: Add input id to of_dma_configure()"), it has
not matched the signature of the full function, leading to build failure
reports when code using this function is built on !OF configurations.

Fixes: a081bd4af4ce ("of/device: Add input id to of_dma_configure()")
Cc: stable@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20220824153256.1437483-1-thierry.reding@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()

[ Upstream commit 38238be4e881a5d0abbe4872b4cd6ed790be06c8 ]

Add missing iounmap() before return from ccio_probe(), if ccio_init_resources()
fails.

Fixes: d46c742f827f ("parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait

[ Upstream commit 56f99b8d06ef1ed1c9730948f9f05ac2b930a20b ]

Today blk_queue_enter() and __bio_queue_enter() return -EBUSY for the
nowait code path. This is not correct: they should return -EAGAIN
instead.

This problem was detected by fio. The following command exposed the
above problem:

t/io_uring -p0 -d128 -b4096 -s32 -c32 -F1 -B0 -R0 -X1 -n24 -P1 -u1 -O0 /dev/ng0n1

By applying the patch, the retry case is handled correctly in the slow
path.

Signed-off-by: Stefan Roesch <shr@fb.com>
Fixes: bfd343aa1718 ("blk-mq: don't wait in blk_mq_queue_enter() if __GFP_WAIT isn't set")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Fix OSD1 RGB to YCbCr coefficient

[ Upstream commit 6463d3930ba5b6addcfc8f80a4543976a2fc7656 ]

VPP_WRAP_OSD1_MATRIX_COEF22.Coeff22 is documented as being bits 0-12,
not 16-28.

Without this the output tends to have a pink hue, changing it results
in better color accuracy.

The vendor kernel doesn't use this register. However the code which
sets VIU2_OSD1_MATRIX_COEF22 also uses bits 0-12. There is a slightly
different style of registers for configuring some of the other matrices,
which do use bits 16-28 for this coefficient, but those have names
ending in MATRIX_COEF22_30, and this is not one of those.

Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908155243.687143-1-stuart.menefy@mathembedded.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Correct OSD1 global alpha value

[ Upstream commit 6836829c8ea453c9e3e518e61539e35881c8ed5f ]

VIU_OSD1_CTRL_STAT.GLOBAL_ALPHA is a 9 bit field, so the maximum
value is 0x100 not 0xff.

This matches the vendor kernel.

Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908155103.686904-1-stuart.menefy@mathembedded.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx

[ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ]

Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support
mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in
mpc512x via falling edge type. Do same for mpc85xx which support was added
in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio").

Fixes probing of lm90 hwmon driver on mpc85xx based board which use level
interrupt. Without it kernel prints error and refuse lm90 to work:

    [   15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
    [   15.267168] lm90 0-004c: cannot request IRQ 49
    [   15.272708] lm90: probe of 0-004c failed with error -22

Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Turn off open-by-filehandle and NFS re-export for NFSv4.0

[ Upstream commit 2a9d683b48c8a87e61a4215792d44c90bcbbb536 ]

The NFSv4.0 protocol only supports open() by name. It cannot therefore
be used with open_by_handle() and friends, nor can it be re-exported by
knfsd.

Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Fixes: 20fa19027286 ("nfs: add export operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: sunxi: Fix name for A100 R_PIO

[ Upstream commit 76648c867c6c03b8a468d9c9222025873ecc613d ]

The name of A100 R_PIO driver should be sun50i-a100-r-pinctrl,
not sun50iw10p1-r-pinctrl.

Fixes: 473436e7647d6 ("pinctrl: sunxi: add support for the Allwinner A100 pin controller")
Signed-off-by: Michael Wu <michael@allwinnertech.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220819024541.74191-1-michael@allwinnertech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH

[ Upstream commit b871656aa4f54e04207f62bdd0d7572be1d86b36 ]

Switching between falling/rising edges for IRQ_TYPE_EDGE_BOTH on pins that
require debounce can cause the device to lose events due to a desync
between pin state and irq type.

This problem is resolved by switching between IRQ_TYPE_LEVEL_LOW and
IRQ_TYPE_LEVEL_HIGH instead.

Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: João H. Spies <jhlspies@gmail.com>
Link: https://lore.kernel.org/r/20220808025121.110223-1-jhlspies@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: qcom: sc8180x: Fix wrong pin numbers

[ Upstream commit 48ec73395887694f13c9452b4dcfb43710451757 ]

The pin numbers for UFS_RESET and SDC2_* are not
consistent in the pinctrl driver for sc8180x.
So fix it.

Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220807122645.13830-3-mollysophia379@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map

[ Upstream commit 6124cec530c7d8faab96d340ab2df5161e5d1c8a ]

Currently in the wakeirq_map, gpio36 and gpio37 have the same wakeirq
number, resulting in gpio37 being unable to trigger interrupts.
It looks like that this is a typo in the wakeirq map. So fix it.

Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver")
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220807122645.13830-2-mollysophia379@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: fdt: fix off-by-one error in unflatten_dt_nodes()

[ Upstream commit 2f945a792f67815abca26fa8a5e863ccf3fa1181 ]

Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree")
forgot to fix up the depth check in the loop body in unflatten_dt_nodes()
which makes it possible to overflow the nps[] buffer...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Fixes: 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/7c354554-006f-6b31-c195-cdfe4caee392@omp.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>