Andrew Vasquez [Tue, 7 Apr 2009 05:33:49 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Add an override option to specify ISP firmware load semantics.
As it may be useful during debugging to use a specific firmware
image.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 7 Apr 2009 05:33:48 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Don't try to 'stop' firmware if already in ROM code.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Michael Reed [Tue, 7 Apr 2009 05:33:47 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Conditionally disable automatic queue full tracking.
Changing a lun's queue depth (/sys/block/sdX/device/queue_depth)
isn't sticky when the device is connected via a QLogic fibre
channel adapter.
The QLogic qla2xxx fibre channel driver dynamically adjusts a
lun's queue depth. If a user has a specific need to limit the
number of commands issued to a lun (say a tape drive, or a shared
raid where the total commands issued to all luns is limited at
the controller level, for example) and writes a limiting value to
/sys/block/sdXX/device/queue_depth, the qla2xxx driver will
silently and gradually increase the queue depth back to the
driver limit of ql2xmaxqdepth. While reducing this value (module
parameter) or increasing the interval between ramp ups
(ql2xqfullrampup) offers the potential for a work around it would
be better to have the option of just disabling the dynamic
adjustment of queue depth.
This patch implements an "off switch" as a module parameter.
Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Joe Carnuccio [Tue, 7 Apr 2009 05:33:46 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Perform an implicit login to the Management Server.
Set the conditional plogi option bit whenever logging in the
fabric management server (if it is already logged in, it does not
need an explicit login; an implicit login suffices).
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 7 Apr 2009 05:33:45 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Restrict model-name/description device-table usage.
Information present in static table is only valid for pre-ISP25xx
adapters.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Harish Zunjarrao [Tue, 7 Apr 2009 05:33:44 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Correct hard-coded address of a second-port's NVRAM.
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 7 Apr 2009 05:33:43 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Correct typo in read_nvram() callback.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Anirban Chakraborty [Tue, 7 Apr 2009 05:33:42 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Remove reference to request queue from scsi request block.
srbs used to maintain a reference to the request queue on which
it was enqueued. This is no longer required as the request queue
pointer is now maintained in the scsi host that issues the srb.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Anirban Chakraborty [Tue, 7 Apr 2009 05:33:41 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Add CPU affinity support.
Set the module parameter ql2xmultique_tag to 1 to enable this
feature. In this mode, the total number of response queues
created is equal to the number of online cpus. Turning the block
layer's rq_affinity mode on enables requests to be routed to the
proper cpu and at the same time it enables completion of the IO
in a response queue that is affined to the cpu in the request
path.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Anirban Chakraborty [Tue, 7 Apr 2009 05:33:40 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Add QoS support.
Set the number of request queues to the module paramater
ql2xmaxqueues. Each vport gets a request queue. The QoS value
set to the request queues determines priority control for queued
IOs. If QoS value is not specified, the vports use the default
queue 0.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 7 Apr 2009 05:33:39 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Correct compilation failures when DEBUG'n' options are enabled.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Tue, 7 Apr 2009 05:33:38 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Export additional FCoE attributes for application support.
Cull and export VN_Port MAC address and VLAN_ID information on
supported FCoE ISPs.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Seokmann Ju [Tue, 7 Apr 2009 05:33:37 +0000 (22:33 -0700)]
[SCSI] qla2xxx: Correct bus-reset behaviour with recent ISPs.
The short-circuit to skip the non-applicable 'full-login-lip'
process on 81xx ISPs was nested too deeply in the 'bus-reset'
routine, as the code in qla2x00_loop_reset() should skip the
whole enable_lip_full_login process. The original code could
cause device tear-down due to the qla2x00_wait_for_loop_ready()
call taking a large amount of time.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
James Bottomley [Wed, 20 May 2009 22:20:44 +0000 (17:20 -0500)]
Merge branch 'scsi-fixes' into merge-base
Linus Torvalds [Tue, 19 May 2009 18:31:56 +0000 (11:31 -0700)]
Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix kind-of-intr checking against number of interrupts
microblaze: Update Microblaze defconfig
Linus Torvalds [Tue, 19 May 2009 18:31:24 +0000 (11:31 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
regulator: da903x: add missing __devexit_p()
Linus Torvalds [Tue, 19 May 2009 18:25:35 +0000 (11:25 -0700)]
Avoid ICE in get_random_int() with gcc-3.4.5
Martin Knoblauch reports that trying to build 2.6.30-rc6-git3 with
RHEL4.3 userspace (gcc (GCC) 3.4.5
20051201 (Red Hat 3.4.5-2)) causes an
internal compiler error (ICE):
drivers/char/random.c: In function `get_random_int':
drivers/char/random.c:1672: error: unrecognizable insn:
(insn 202 148 150 0 /scratch/build/linux-2.6.30-rc6-git3/arch/x86/include/asm/tsc.h:23 (set (reg:SI 0 ax [91])
(subreg:SI (plus:DI (plus:DI (reg:DI 0 ax [88])
(subreg:DI (reg:SI 6 bp) 0))
(const_int -4 [0xfffffffffffffffc])) 0)) -1 (nil)
(nil))
drivers/char/random.c:1672: internal compiler error: in extract_insn, at recog.c:2083
and after some debugging it turns out that it's due to the code trying
to figure out the rough value of the current stack pointer by taking an
address of an uninitialized variable and casting that to an integer.
This is clearly a compiler bug, but it's not worth fighting - while the
current stack kernel pointer might be somewhat hard to predict in user
space, it's also not generally going to change for a lot of the call
chains for a particular process.
So just drop it, and mumble some incoherent curses at the compiler.
Tested-by: Martin Knoblauch <spamtrap@knobisoft.de>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Frank Filz [Mon, 18 May 2009 21:41:40 +0000 (17:41 -0400)]
nfs: Fix NFS v4 client handling of MAY_EXEC in nfs_permission.
The problem is that permission checking is skipped if atomic open is
possible, but when exec opens a file, it just opens it O_READONLY which
means EXEC permission will not be checked at that time.
This problem is observed by the following sequence (executed as root):
mount -t nfs4 server:/ /mnt4
echo "ls" >/mnt4/foo
chmod 744 /mnt4/foo
su guest -c "mnt4/foo"
Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Tested-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Moore [Mon, 18 May 2009 18:57:24 +0000 (12:57 -0600)]
[SCSI] mpt2sas: fix driver version inconsistency
In Commit
commit
3b8b5c9b1f08660583e5dfe095c24170df62f1d2
Author: Eric Moore <eric.moore@lsi.com>
Date: Tue Apr 21 15:44:27 2009 -0600
[SCSI] mpt2sas : bump driver version to 01.100.02.00
The MPT2SAS_MAJOR_VERSION didn't get bumped from 00 to 01 so
applications will see it incorrectly as 00.100.02.00 driver instead of
01.100.02.00. Fix by making MPT2SAS_MAJOR_VERSION match the major
number in MPT2SAS_DRIVER_VERSION
Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Linus Torvalds [Mon, 18 May 2009 17:22:04 +0000 (10:22 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Explicit alignment for .data.cacheline_aligned
powerpc/ps3: Update ps3_defconfig
powerpc/ftrace: Fix constraint to be early clobber
powerpc/ftrace: Use pr_devel() in ftrace.c
powerpc: Do not assert pte_locked for hugepage PTE entries
Linus Torvalds [Mon, 18 May 2009 17:11:06 +0000 (10:11 -0700)]
Merge branches 'sched-fixes-for-linus-2' and 'core-fixes-for-linus-2' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix fallback sched_clock()'s offset when using jiffies
* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
lockdep: increase MAX_LOCKDEP_ENTRIES and MAX_LOCKDEP_CHAINS
Linus Torvalds [Mon, 18 May 2009 16:17:37 +0000 (09:17 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix performance regression caused by paravirt_ops on native kernels
xen: use header for EXPORT_SYMBOL_GPL
x86, 32-bit: fix kernel_trap_sp()
x86: fix percpu_{to,from}_op()
x86: mtrr: Fix high_width computation when phys-addr is >= 44bit
x86: Fix false positive section mismatch warnings in the apic code
Linus Torvalds [Mon, 18 May 2009 16:15:41 +0000 (09:15 -0700)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Append prompt in /debug/tracing/README file
x86/function-graph: fix constraint for recording old return value
David Woodhouse [Mon, 18 May 2009 12:07:35 +0000 (13:07 +0100)]
Fix oops on close of hot-unplugged FTDI serial converter
Commit
c45d6320 ("fix reference counting of ftdi_private") stopped
ftdi_sio_port_remove() from directly freeing the port-private data, with
the intention if the port was still open, it would be freed when
ftdi_close() is eventually called and releases the last refcount on the
structure.
That's all very well, but ftdi_sio_port_remove() still contains a call
to usb_set_serial_port_data(port, NULL) -- so by the time we get to
ftdi_close() for the port which was unplugged, it _still_ oopses on
dereferencing that NULL pointer, as it did before (and does in 2.6.29).
The fix is just not to clear the private data in ftdi_sio_port_remove().
Then the refcount is properly reduced to zero when the final kref_put()
happens in ftdi_close().
Remove a bogus comment too, while we're at it. And stop doing things
inside "if (priv)" -- it must _always_ be there.
Based loosely on an earlier patch by Daniel Mack, and suggestions by
Alan Stern.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tested-by: Daniel Mack <daniel@caiaq.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Korsgaard [Mon, 18 May 2009 10:13:54 +0000 (11:13 +0100)]
mtd_dataflash: unbreak erase support
Commit
5b7f3a50 (fix dataflash 64-bit divisions) unfortunately
introduced a typo. Erase addr and len were swapped in the pageaddr
calculation, causing the wrong sectors to get erased.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roel Kluin [Mon, 18 May 2009 01:18:58 +0000 (18:18 -0700)]
asm-generic: fix local_add_unless macro
`local_add_unless(x, y, z)' will be expanded to `(&(x)->y, (y), (x))', but
`&(x)->y' should be `&(x)->a'
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Simek [Thu, 14 May 2009 11:35:52 +0000 (13:35 +0200)]
microblaze: Fix kind-of-intr checking against number of interrupts
+ Fix typographic fault.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Michal Simek [Mon, 11 May 2009 07:24:47 +0000 (09:24 +0200)]
microblaze: Update Microblaze defconfig
Signed-off-by: Michal Simek <monstr@monstr.eu>
Mike Frysinger [Fri, 15 May 2009 18:50:33 +0000 (14:50 -0400)]
regulator: da903x: add missing __devexit_p()
The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Liam Girdwood <lrg@slimlogic.co.uk>
CC: Mike Rapoport <mike@compulab.co.il>
CC: Eric Miao <eric.miao@marvell.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Benjamin Herrenschmidt [Sun, 17 May 2009 18:29:03 +0000 (18:29 +0000)]
powerpc: Explicit alignment for .data.cacheline_aligned
I don't think anything guarantees that the objects in data.page_aligned
are a multiple of PAGE_SIZE, thus the section may end on any boundary.
So the following section, .data.cacheline_aligned needs an explicit
alignment.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Geoff Levand [Fri, 15 May 2009 08:01:59 +0000 (08:01 +0000)]
powerpc/ps3: Update ps3_defconfig
Refresh and set these options:
CONFIG_SYSFS_DEPRECATED_V2: y -> n
CONFIG_INPUT_JOYSTICK: y -> n
CONFIG_HID_SONY: n -> m
CONFIG_RTC_DRV_PS3: - -> m
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Steven Rostedt [Fri, 15 May 2009 04:33:54 +0000 (04:33 +0000)]
powerpc/ftrace: Fix constraint to be early clobber
After upgrading my distcc boxes from gcc 4.2.2 to 4.4.0, the function
graph tracer broke. This was discovered on my x86 boxes.
The issue is that gcc used the same register for an output as it did for
an input in an asm statement. I first thought this was a bug in gcc and
reported it. I was notified that gcc was correct and that the output had
to be flagged as an "early clobber".
I noticed that powerpc had the same issue and this patch fixes it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Michael Ellerman [Wed, 13 May 2009 20:30:24 +0000 (20:30 +0000)]
powerpc/ftrace: Use pr_devel() in ftrace.c
pr_debug() can now result in code being generated even when #DEBUG
is not defined. That's not really desirable in the ftrace code
which we want to be snappy.
With CONFIG_DYNAMIC_DEBUG=y:
size before:
text data bss dec hex filename
3334 672 4 4010 faa arch/powerpc/kernel/ftrace.o
size after:
text data bss dec hex filename
2616 360 4 2980 ba4 arch/powerpc/kernel/ftrace.o
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Mel Gorman [Thu, 30 Apr 2009 10:59:19 +0000 (10:59 +0000)]
powerpc: Do not assert pte_locked for hugepage PTE entries
With CONFIG_DEBUG_VM, an assertion is made when changing the protection
flags of a PTE that the PTE is locked. Huge pages use a different pagetable
format and the assertion is bogus and will always trigger with a bug looking
something like
Unable to handle kernel paging request for data at address 0xf1a00235800006f8
Faulting instruction address: 0xc000000000034a80
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=32 NUMA Maple
Modules linked in: dm_snapshot dm_mirror dm_region_hash
dm_log dm_mod loop evdev ext3 jbd mbcache sg sd_mod ide_pci_generic
pata_amd ata_generic ipr libata tg3 libphy scsi_mod windfarm_pid
windfarm_smu_sat windfarm_max6690_sensor windfarm_lm75_sensor
windfarm_cpufreq_clamp windfarm_core i2c_powermac
NIP:
c000000000034a80 LR:
c000000000034b18 CTR:
0000000000000003
REGS:
c000000003037600 TRAP: 0300 Not tainted (2.6.30-rc3-autokern1)
MSR:
9000000000009032 <EE,ME,IR,DR> CR:
28002484 XER:
200fffff
DAR:
f1a00235800006f8, DSISR:
0000000040010000
TASK =
c0000002e54cc740[2960] 'map_high_trunca' THREAD:
c000000003034000 CPU: 2
GPR00:
4000000000000000 c000000003037880 c000000000895d30 c0000002e5a2e500
GPR04:
00000000a0000000 c0000002edc40880 0000005700000393 0000000000000001
GPR08:
f000000011ac0000 01a00235800006e8 00000000000000f5 f1a00235800006e8
GPR12:
0000000028000484 c0000000008dd780 0000000000001000 0000000000000000
GPR16:
fffffffffffff000 0000000000000000 00000000a0000000 c000000003037a20
GPR20:
c0000002e5f4ece8 0000000000001000 c0000002edc40880 0000000000000000
GPR24:
c0000002e5f4ece8 0000000000000000 00000000a0000000 c0000002e5f4ece8
GPR28:
0000005700000393 c0000002e5a2e500 00000000a0000000 c000000003037880
NIP [
c000000000034a80] .assert_pte_locked+0xa4/0xd0
LR [
c000000000034b18] .ptep_set_access_flags+0x6c/0xb4
Call Trace:
[
c000000003037880] [
c000000003037990] 0xc000000003037990 (unreliable)
[
c000000003037910] [
c000000000034b18] .ptep_set_access_flags+0x6c/0xb4
[
c0000000030379b0] [
c00000000014bef8] .hugetlb_cow+0x124/0x674
[
c000000003037b00] [
c00000000014c930] .hugetlb_fault+0x4e8/0x6f8
[
c000000003037c00] [
c00000000013443c] .handle_mm_fault+0xac/0x828
[
c000000003037cf0] [
c0000000000340a8] .do_page_fault+0x39c/0x584
[
c000000003037e30] [
c0000000000057b0] handle_page_fault+0x20/0x5c
Instruction dump:
7d29582a 7d200074 7800d182 0b000000 3c004000 3960ffff 780007c6 796b00c4
7d290214 7929a302 1d290068 7d6b4a14 <
800b0010>
7c000074 7800d182 0b000000
This patch fixes the problem by not asseting the PTE is locked for VMAs
backed by huge pages.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Toshiyuki Okajima [Sun, 17 May 2009 05:56:28 +0000 (22:56 -0700)]
page-writeback: fix the calculation of the oldest_jif in wb_kupdate()
wb_kupdate() function has a bug on linux-2.6.30-rc5. This bug causes
generic_sync_sb_inodes() to start to write inodes back much earlier than
our expectations because it miscalculates oldest_jif in wb_kupdate().
This bug was introduced in
704503d836042d4a4c7685b7036e7de0418fbc0f
('mm: fix proc_dointvec_userhz_jiffies "breakage"').
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 17 May 2009 22:48:05 +0000 (15:48 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: padlock - Revert aes-all alias to aes
crypto: api - Fix algorithm module auto-loading
crypto: eseqiv - Fix IV generation for sync algorithms
crypto: ixp4xx - check firmware for crypto support
Linus Torvalds [Sun, 17 May 2009 18:46:22 +0000 (11:46 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
PM: check sysdev_suspend(PMSG_FREEZE) return value
Jeff Mahoney [Sun, 17 May 2009 05:02:03 +0000 (01:02 -0400)]
reiserfs: fixup perms when xattrs are disabled
This adds CONFIG_REISERFS_FS_XATTR protection from reiserfs_permission.
This is needed to avoid warnings during file deletions and chowns with
xattrs disabled.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Mahoney [Sun, 17 May 2009 05:02:02 +0000 (01:02 -0400)]
reiserfs: deal with NULL xattr root w/ xattrs disabled
This avoids an Oops in open_xa_root that can occur when deleting a file
with xattrs disabled. It assumes that the xattr root will be there, and
that is not guaranteed.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Mahoney [Sun, 17 May 2009 05:02:01 +0000 (01:02 -0400)]
reiserfs: clean up ifdefs
With xattr cleanup even with xattrs disabled, much of the initial setup
is still performed. Some #ifdefs are just not needed since the options
they protect wouldn't be available anyway.
This cleans those up.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 17 May 2009 18:44:19 +0000 (11:44 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
mm: SLOB fix reclaim_state
mm: SLUB fix reclaim_state
slub: add Documentation/ABI/testing/sysfs-kernel-slab
slub: enforce MAX_ORDER
Linus Torvalds [Sat, 16 May 2009 20:41:28 +0000 (13:41 -0700)]
Fix caller information for warn_slowpath_null
Ian Campbell noticed that since "Eliminate thousands of warnings with
gcc 3.2 build" (commit
57adc4d2dbf968fdbe516359688094eef4d46581) all
WARN_ON()'s currently appear to come from warn_slowpath_null(), eg:
WARNING: at kernel/softirq.c:143 warn_slowpath_null+0x1c/0x20()
because now that warn_slowpath_null() is in the call path, the
__builtin_return_address(0) returns that, rather than the place that
caused the warning.
Fix this by splitting up the warn_slowpath_null/fmt cases differently,
using a common helper function, and getting the return address in the
right place. This also happens to avoid the unnecessary stack usage for
the non-stdargs case, and just generally cleans things up.
Make the function name printout use %pS while at it.
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 16 May 2009 19:47:11 +0000 (12:47 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bart/ide-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
piix: The Sony TZ90 needs the cable type hardcoding
icside: register second channel of version 6 PCB
ide-tape: remove back-to-back REQUEST_SENSE detection
Linus Torvalds [Sat, 16 May 2009 18:22:06 +0000 (11:22 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: Idle C-states disabled by max_cstate should not disable the TSC
ACPI: idle: fix init-time TSC check regression
ACPI processor: reset the throttling state once it's invalid
ACPI processor: introduce module parameter processor.ignore_tpc
ACPI, i915: build fix
ACPI: suspend: restore BM_RLD on resume
ACPI: resume: re-enable SCI-enable workaround
thermal: fix off-by-1 error in trip point trigger condition
eeepc-laptop: unregister_rfkill_notifier on failure
asus-laptop: fix input keycode
eeepc-laptop: support for super hybrid engine (SHE)
eeepc-laptop: Work around rfkill firmware bug
eeepc-laptop: report brightness control events via the input layer
eeepc-laptop: fix wlan rfkill state change during init
ACPI: suspend: don't let device _PS3 failure prevent suspend
ACPI: power: update error message
ACPI: video: DMI workaround another broken Acer BIOS enabling display brightness
ACPICA: use acpi.* modparam namespace
ACPI video: dmi check for broken _BQC on Acer Aspire 5720
Alan Cox [Sat, 16 May 2009 17:03:36 +0000 (19:03 +0200)]
piix: The Sony TZ90 needs the cable type hardcoding
The Sony TZ90 needs the cable type hardcoding. See bug #12734
Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Jonathan E. Snow <jesnow@uh.edu>
[bart: port it from ata_piix to piix and give reporter the proper credit]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sergei Shtylyov [Sat, 16 May 2009 17:03:36 +0000 (19:03 +0200)]
icside: register second channel of version 6 PCB
The second IDE channel of version 6 PCB is not being registered anymore since
the commit
48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host
(take 3)).
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Tejun Heo [Sat, 18 Apr 2009 22:00:41 +0000 (07:00 +0900)]
ide-tape: remove back-to-back REQUEST_SENSE detection
Impact: fix an oops which always triggers
ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when
checking for back-to-back request sense issues but drive->pc can be
NULL and even when it's not NULL, it's not safe to dereference it once
the previous command is complete because pc could have been freed or
was on stack. Kill back-to-back REQUEST_SENSE detection.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Len Brown [Sat, 16 May 2009 05:55:59 +0000 (01:55 -0400)]
Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', 'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release
Len Brown [Fri, 15 May 2009 05:29:31 +0000 (01:29 -0400)]
ACPI: Idle C-states disabled by max_cstate should not disable the TSC
Processor idle power states C2 and C3 stop the TSC on many machines.
Linux recognizes this situation and marks the TSC as unstable:
Marking TSC unstable due to TSC halts in idle
But if those same machines are booted with "processor.max_cstate=1",
then there is no need to validate C2 and C3, and no need to
disable the TSC, which can be reliably used as a clocksource.
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Len Brown [Thu, 14 May 2009 21:27:38 +0000 (17:27 -0400)]
ACPI: idle: fix init-time TSC check regression
A previous 2.6.30 patch,
a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2,
(ACPI: idle: mark_tsc_unstable() at init-time, not run-time)
erroneously disabled the TSC on systems that did not actually
have valid deep C-states.
Move the check after the deep-C-states are validated,
via new helper, tsc_check_state(), hich replaces tsc_halts_in_c().
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Frans Pop <elendil@planet.nl>
Linus Torvalds [Sat, 16 May 2009 04:12:57 +0000 (21:12 -0700)]
Linux 2.6.30-rc6
Zhang Rui [Mon, 11 May 2009 01:36:01 +0000 (09:36 +0800)]
ACPI processor: reset the throttling state once it's invalid
If the BIOS hands us an invalid throttling state,
write a valid state.
http://bugzilla.kernel.org/show_bug.cgi?id=13259
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Mon, 11 May 2009 01:35:57 +0000 (09:35 +0800)]
ACPI processor: introduce module parameter processor.ignore_tpc
Introduce module parameter processor.ignore_tpc.
Some laptops are shipped with buggy _TPC,
this module parameter is used to to disable the buggy support.
http://bugzilla.kernel.org/show_bug.cgi?id=13259
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: James Ettle <theholyettlz@googlemail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 24 Apr 2009 15:33:47 +0000 (11:33 -0400)]
ACPI, i915: build fix
drivers/built-in.o: In function `intel_opregion_init':
(.text+0x9d540): undefined reference to `acpi_video_register'
http://bugzilla.kernel.org/show_bug.cgi?id=13165
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 8 May 2009 02:19:45 +0000 (22:19 -0400)]
ACPI: suspend: restore BM_RLD on resume
In 2.6.29,
31878dd86b7df9a147f5e6cc6e07092b4308782b
"ACPI: remove BM_RLD access from idle entry path"
moved BM_RLD initialization to init-time from run time.
But we discovered that some BIOS do not restore BM_RLD
after suspend, causing device errors on C3 and C4
after resume. So now the kernel restores BM_RLD.
http://bugzilla.kernel.org/show_bug.cgi?id=13032
Signed-off-by: Len Brown <len.brown@intel.com>
Lin Ming [Sat, 16 May 2009 02:27:49 +0000 (22:27 -0400)]
ACPI: resume: re-enable SCI-enable workaround
The BIOS bug workaround mistakenly got disabled
when we followed the ACPI specification more closely
by ignoring OS updates to that bit.
(The BIOS is supposed to update SCI_EN, not the OS)
http://bugzilla.kernel.org/show_bug.cgi?id=13289
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Fri, 15 May 2009 23:47:55 +0000 (16:47 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI MSI: Fix MSI-X with NIU cards
PCI: Fix pci-e port driver slot_reset bad default return value
Bjorn Helgaas [Fri, 15 May 2009 21:30:50 +0000 (23:30 +0200)]
PM: check sysdev_suspend(PMSG_FREEZE) return value
Check the return value of sysdev_suspend(). I think this was a typo.
Without this change, the following "if" check is always false.
I also changed the error message so it's distinguishable from the
similar message a few lines above.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Linus Torvalds [Fri, 15 May 2009 21:29:53 +0000 (14:29 -0700)]
Merge git://git./linux/kernel/git/holtmann/bluetooth-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6:
Bluetooth: Don't trigger disconnect timeout for security mode 3 pairing
Bluetooth: Don't use hci_acl_connect_cancel() for incoming connections
Bluetooth: Fix wrong module refcount when connection setup fails
Another case of me handling the fallout from Davem's unfortunate
addiction to shuffleboard.
Won't anybody think of the children? Join the anti-shuffleboard league
today!
Linus Torvalds [Fri, 15 May 2009 20:22:11 +0000 (13:22 -0700)]
Merge branch 'drm-intel-next' of git://git./linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.
drm/i915: Set HDMI hot plug interrupt enable for only the output in question.
drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS.
drm/i915: Use the GM45 VGA hotplug workaround on G45 as well.
drm/i915: ignore LVDS on intel graphics systems that lie about having it
drm/i915: sanity check IER at wait_request time
drm/i915: workaround IGD i2c bus issue in kernel side (v2)
drm/i915: Don't allow binding objects into the last page of the aperture.
drm/i915: save/restore fence registers across suspend/resume
drm/i915: x86 always has writeq. Add I915_READ64 for symmetry.
Linus Torvalds [Fri, 15 May 2009 19:04:37 +0000 (12:04 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: Media rotation rate and form factor heuristics
libata: Report disk alignment and physical block size
sata_fsl: Fix the command description of FSL SATA controller
sata_fsl: Fix compile warnings
[libata] sata_sx4: fixup interrupt handling
[libata] sata_sx4: convert to new exception handling methods
Linus Torvalds [Fri, 15 May 2009 19:01:59 +0000 (12:01 -0700)]
Merge git://git./linux/kernel/git/linville/wireless-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6:
iwlwifi: fix device id registration for 6000 series 2x2 devices
ath5k: update channel in sw state after stopping RX and TX
rtl8187: use DMA-aware buffers with usb_control_msg
mac80211: avoid NULL ptr deref when finding max_rates in PID and minstrel
airo: airo_get_encode{,ext} potential buffer overflow
Pulled directly by Linus because Davem is off playing shuffle-board at
some Alaskan cruise, and the NULL ptr deref issue hits people and should
get merged sooner rather than later.
David - make us proud on the shuffle-board tournament!
Martin K. Petersen [Fri, 15 May 2009 04:40:35 +0000 (00:40 -0400)]
libata: Media rotation rate and form factor heuristics
This patch provides new heuristics for parsing both the form factor and
media rotation rate ATA IDENFITY words.
The reported ATA version must be 7 or greater and the device must return
values defined as valid in the standard. Only then are the
characteristics reported to SCSI via the VPD B1 page.
This seems like a reasonable compromise to me considering that we have
been shipping several kernel releases that key off the rotation rate bit
without any version checking whatsoever. With no complaints so far.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Martin K. Petersen [Fri, 15 May 2009 04:40:34 +0000 (00:40 -0400)]
libata: Report disk alignment and physical block size
For disks with 4KB sectors, report the correct block size and alignment
when filling out the READ CAPACITY(16) response.
This patch is based upon code from Matthew Wilcox' 4KB ATA tree. I
fixed the bug I reported a while back caused by ATA and SCSI using
different approaches to describing the alignment.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Dave Liu [Thu, 14 May 2009 14:47:07 +0000 (09:47 -0500)]
sata_fsl: Fix the command description of FSL SATA controller
The bit 11 of command description is reserved bit in Freescale
SATA controller and needs to be set to '1'. This is needed to
make sure the last write from the controller to the buffer
descriptor is seen before an interrupt is raised.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Kumar Gala [Thu, 14 May 2009 03:10:50 +0000 (22:10 -0500)]
sata_fsl: Fix compile warnings
We we build with dma_addr_t as a 64-bit quantity we get:
drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg':
drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t'
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
David Milburn [Wed, 13 May 2009 23:02:21 +0000 (18:02 -0500)]
[libata] sata_sx4: fixup interrupt handling
Issuing ATA_CMD_SET_FEATURES (0xef) times out because
pdc20621_interrupt ignores command completion since
ATA_TFLAG_POLLING flag is set.
This has already been fixed for sata_promise:
commit
51b94d2a5a90d4800e74d7348bcde098a28f4fb3
Author: Tejun Heo <htejun@gmail.com>
Date: Fri Jun 8 13:46:55 2007 -0700
sata_promise: use TF interface for polling NODATA commands
Also, this patch includes Mikael's original patches:
http://marc.info/?l=linux-ide&m=
121135828227724&w=2
http://marc.info/?l=linux-ide&m=
121144512109826&w=2
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jeremy Fitzhardinge [Thu, 14 May 2009 00:16:55 +0000 (17:16 -0700)]
x86: Fix performance regression caused by paravirt_ops on native kernels
Xiaohui Xin and some other folks at Intel have been looking into what's
behind the performance hit of paravirt_ops when running native.
It appears that the hit is entirely due to the paravirtualized
spinlocks introduced by:
| commit
8efcbab674de2bee45a2e4cdf97de16b8e609ac8
| Date: Mon Jul 7 12:07:51 2008 -0700
|
| paravirt: introduce a "lock-byte" spinlock implementation
The extra call/return in the spinlock path is somehow
causing an increase in the cycles/instruction of somewhere around 2-7%
(seems to vary quite a lot from test to test). The working theory is
that the CPU's pipeline is getting upset about the
call->call->locked-op->return->return, and seems to be failing to
speculate (though I haven't seen anything definitive about the precise
reasons). This doesn't entirely make sense, because the performance
hit is also visible on unlock and other operations which don't involve
locked instructions. But spinlock operations clearly swamp all the
other pvops operations, even though I can't imagine that they're
nearly as common (there's only a .05% increase in instructions
executed).
If I disable just the pv-spinlock calls, my tests show that pvops is
identical to non-pvops performance on native (my measurements show that
it is actually about .1% faster, but Xiaohui shows a .05% slowdown).
Summary of results, averaging 10 runs of the "mmperf" test, using a
no-pvops build as baseline:
nopv Pv-nospin Pv-spin
CPU cycles 100.00% 99.89% 102.18%
instructions 100.00% 100.10% 100.15%
CPI 100.00% 99.79% 102.03%
cache ref 100.00% 100.84% 100.28%
cache miss 100.00% 90.47% 88.56%
cache miss rate 100.00% 89.72% 88.31%
branches 100.00% 99.93% 100.04%
branch miss 100.00% 103.66% 107.72%
branch miss rt 100.00% 103.73% 107.67%
wallclock 100.00% 99.90% 102.20%
The clear effect here is that the 2% increase in CPI is
directly reflected in the final wallclock time.
(The other interesting effect is that the more ops are
out of line calls via pvops, the lower the cache access
and miss rates. Not too surprising, but it suggests that
the non-pvops kernel is over-inlined. On the flipside,
the branch misses go up correspondingly...)
So, what's the fix?
Paravirt patching turns all the pvops calls into direct calls, so
_spin_lock etc do end up having direct calls. For example, the compiler
generated code for paravirtualized _spin_lock is:
<_spin_lock+0>: mov %gs:0xb4c8,%rax
<_spin_lock+9>: incl 0xffffffffffffe044(%rax)
<_spin_lock+15>: callq *0xffffffff805a5b30
<_spin_lock+22>: retq
The indirect call will get patched to:
<_spin_lock+0>: mov %gs:0xb4c8,%rax
<_spin_lock+9>: incl 0xffffffffffffe044(%rax)
<_spin_lock+15>: callq <__ticket_spin_lock>
<_spin_lock+20>: nop; nop /* or whatever 2-byte nop */
<_spin_lock+22>: retq
One possibility is to inline _spin_lock, etc, when building an
optimised kernel (ie, when there's no spinlock/preempt
instrumentation/debugging enabled). That will remove the outer
call/return pair, returning the instruction stream to a single
call/return, which will presumably execute the same as the non-pvops
case. The downsides arel 1) it will replicate the
preempt_disable/enable code at eack lock/unlock callsite; this code is
fairly small, but not nothing; and 2) the spinlock definitions are
already a very heavily tangled mass of #ifdefs and other preprocessor
magic, and making any changes will be non-trivial.
The other obvious answer is to disable pv-spinlocks. Making them a
separate config option is fairly easy, and it would be trivial to
enable them only when Xen is enabled (as the only non-default user).
But it doesn't really address the common case of a distro build which
is going to have Xen support enabled, and leaves the open question of
whether the native performance cost of pv-spinlocks is worth the
performance improvement on a loaded Xen system (10% saving of overall
system CPU when guests block rather than spin). Still it is a
reasonable short-term workaround.
[ Impact: fix pvops performance regression when running native ]
Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com>
Analysed-by: "Li Xin" <xin.li@intel.com>
Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Xen-devel <xen-devel@lists.xensource.com>
LKML-Reference: <
4A0B62F7.5030802@goop.org>
[ fixed the help text ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jeff Garzik [Wed, 8 Apr 2009 20:02:18 +0000 (16:02 -0400)]
[libata] sata_sx4: convert to new exception handling methods
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
GeunSik Lim [Thu, 14 May 2009 08:23:38 +0000 (17:23 +0900)]
tracing: Append prompt in /debug/tracing/README file
append prompt in /debug/tracing/README file.
This is trivial issue. Fix typo Mini Howto file(README) for ftrace.
[ Impact: cleanup ]
Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: williams <williams@redhat.com>
LKML-Reference: <
1242289418.31161.45.camel@centos51>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
adam radford [Mon, 11 May 2009 21:55:55 +0000 (14:55 -0700)]
[SCSI] 3w-xxxx: scsi_dma_unmap fix
This patch fixes the following regression that occurred during the
scsi_dma_map()/unmap()
changes when compiling with CONFIG_DMA_API_DEBUG=y :
WARNING: at lib/dma-debug.c:496 check_unmap+0x142/0x542()
Hardware name:
3w-xxxx 0000:02:02.0: DMA-API: device driver tries to free DMA memory
it has not allocated [device address=0x0000000000000000] [size=36
bytes]
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
adam radford [Tue, 5 May 2009 18:45:37 +0000 (11:45 -0700)]
[SCSI] 3w-9xxx: scsi_dma_unmap fix
This patch fixes the following regression the occurred during the
scsi_dma_map()/unmap() changes:
3w-9xxx 0001:45:00.0: DMA-API: device driver tries to free DMA memory
it has not allocated [device address=0x0000000000000000] [size=36
bytes]
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Yinghai Lu [Fri, 1 May 2009 02:13:41 +0000 (19:13 -0700)]
[SCSI] ses: fix problems caused by empty SES provided name
We use the name provided by SES to name objects. An empty name is
legal in SES but causes problems in our generic device hierarchy. Fix
this by falling back to a number if the name is either NULL or empty.
Also fix a secondary bug spotted in that dev_set_name(dev, name) uses
a string format and so would go wrong if name contained a '%'.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Andrew Vasquez [Wed, 29 Apr 2009 18:12:39 +0000 (13:12 -0500)]
[SCSI] fc-transport: Close state transition-window during rport deletion.
Andrew Vasquez wrote:
> fc-transport: Close state transition-window during rport deletion.
>
> After an rport's state has transitioned to FC_PORTSTATE_BLOCKED,
> but, prior to making the upcall to 'block' the scsi-target
> associated with an rport, queued commands can recycle and
> ultimately run out of retries causing failures to propagate to
> upper-level drivers. Close this transition-window by returning
> the non-'retries' modifying DID_IMM_RETRY status for submitted
> I/Os.
The same can happen for iscsi when transitioning from logged in
to failed and blocking the sdevs.
This patch converts iscsi and fc's transitions back to use DID_IMM_RETRY
instead of DID_TRANSPORT_DISRUPTED which has a limited number of retries
that we do not want to use for handling this race.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
[Addition of iscsi and fc port online devloss case conversion by Mike Christie]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Linus Torvalds [Fri, 15 May 2009 15:07:25 +0000 (08:07 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix race in ext4_inode_info.i_cached_extent
ext4: Clear the unwritten buffer_head flag after the extent is initialized
ext4: Use a fake block number for delayed new buffer_head
ext4: Fix sub-block zeroing for writes into preallocated extents
Linus Torvalds [Fri, 15 May 2009 15:06:56 +0000 (08:06 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ASoC: DaVinci EVM board support buildfixes
ASoC: DaVinci I2S updates
ASoC: davinci-pcm buildfixes
ALSA: pcsp: fix printk format warning
ALSA: riptide: postfix increment and off by one
pxa2xx-ac97: fix reset gpio mode setting
ASoC: soc-core: fix crash when removing not instantiated card
Linus Torvalds [Fri, 15 May 2009 15:06:45 +0000 (08:06 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb: gdb documentation fix
kgdb,i386: use address that SP register points to in the exception frame
sysrq, intel_fb: fix sysrq g collision
Linus Torvalds [Fri, 15 May 2009 15:05:37 +0000 (08:05 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
Revert "mm: add /proc controls for pdflush threads"
viocd: needs to depend on BLOCK
block: fix the bio_vec array index out-of-bounds test
Linus Torvalds [Fri, 15 May 2009 15:05:02 +0000 (08:05 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix PCI ROM access
powerpc/pseries: Really fix the oprofile CPU type on pseries
serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.
powerpc/cell: Make ptcal more reliable
powerpc: Allow mem=x cmdline to work with 4G+
powerpc/mpic: Fix incorrect allocation of interrupt rev-map
powerpc: Fix oprofile sampling of marked events on POWER7
powerpc/iseries: Fix pci breakage due to bad dma_data initialization
powerpc: Fix mktree build error on Mac OS X host
powerpc/virtex: Fix duplicate level irq events.
powerpc/virtex: Add uImage to the default images list
powerpc/boot: add simpleImage.* to clean-files list
powerpc/8xx: Update defconfigs
powerpc/embedded6xx: Update defconfigs
powerpc/86xx: Update defconfigs
powerpc/85xx: Update defconfigs
powerpc/83xx: Update defconfigs
powerpc/fsl_soc: Remove mpc83xx_wdt_init, again
Sukadev Bhattiprolu [Fri, 15 May 2009 02:38:24 +0000 (19:38 -0700)]
devpts: correctly set default options
devpts_get_sb() calls memset(0) to clear mount options and calls
parse_mount_options() if user specified any mount options.
The memset(0) is bogus since the 'mode' and 'ptmxmode' options are
non-zero by default. parse_mount_options() restores options to default
anyway and can properly deal with NULL mount options.
So in devpts_get_sb() remove memset(0) and call parse_mount_options() even
for NULL mount options.
Bug reported by Eric Paris: http://lkml.org/lkml/2009/5/7/448.
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
Reported-by: Eric Paris <eparis@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Reviewed-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Fri, 15 May 2009 13:38:26 +0000 (15:38 +0200)]
Merge branch 'fix/asoc' into for-linus
* fix/asoc:
ASoC: DaVinci EVM board support buildfixes
ASoC: DaVinci I2S updates
ASoC: davinci-pcm buildfixes
pxa2xx-ac97: fix reset gpio mode setting
ASoC: soc-core: fix crash when removing not instantiated card
Takashi Iwai [Fri, 15 May 2009 13:38:20 +0000 (15:38 +0200)]
Merge branch 'fix/misc' into for-linus
* fix/misc:
ALSA: pcsp: fix printk format warning
ALSA: riptide: postfix increment and off by one
Theodore Ts'o [Fri, 15 May 2009 13:07:28 +0000 (09:07 -0400)]
ext4: Fix race in ext4_inode_info.i_cached_extent
If two CPU's simultaneously call ext4_ext_get_blocks() at the same
time, there is nothing protecting the i_cached_extent structure from
being used and updated at the same time. This could potentially cause
the wrong location on disk to be read or written to, including
potentially causing the corruption of the block group descriptors
and/or inode table.
This bug has been in the ext4 code since almost the very beginning of
ext4's development. Fortunately once the data is stored in the page
cache cache, ext4_get_blocks() doesn't need to be called, so trying to
replicate this problem to the point where we could identify its root
cause was *extremely* difficult. Many thanks to Kevin Shanahan for
working over several months to be able to reproduce this easily so we
could finally nail down the cause of the corruption.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Frank Rowand [Fri, 15 May 2009 12:56:25 +0000 (07:56 -0500)]
kgdb: gdb documentation fix
gdb command "set remote debug 1" is not valid, change to correct command.
Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Thu, 12 Feb 2009 00:46:32 +0000 (18:46 -0600)]
kgdb,i386: use address that SP register points to in the exception frame
The treatment of the SP register is different on x86_64 and i386.
This is a regression fix that lived outside the mainline kernel from
2.6.27 to now. The regression was a result of the original merge
consolidation of the i386 and x86_64 archs to x86.
The incorrectly reported SP on i386 prevented stack tracebacks from
working correctly in gdb.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Jason Wessel [Thu, 14 May 2009 02:56:59 +0000 (21:56 -0500)]
sysrq, intel_fb: fix sysrq g collision
Commit
79e539453b34e35f39299a899d263b0a1f1670bd introduced a
regression where you cannot use sysrq 'g' to enter kgdb. The solution
is to move the intel fb sysrq over to V for video instead of G for
graphics. The SMP VOYAGER code to register for the sysrq-v is not
anywhere to be found in the mainline kernel, so the comments in the
code were cleaned up as well.
This patch also cleans up the sysrq definitions for kgdb to make it
generic for the kernel debugger, such that the sysrq 'g' can be used
in the future to enter a gdbstub or another kernel debugger.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jens Axboe [Fri, 15 May 2009 09:32:24 +0000 (11:32 +0200)]
Revert "mm: add /proc controls for pdflush threads"
This reverts commit
fafd688e4c0c34da0f3de909881117d374e4c7af.
Work is progressing to switch away from pdflush as the process backing
for flushing out dirty data. So it seems pointless to add more knobs
to control pdflush threads. The original author of the patch did not
have any specific use cases for adding the knobs, so we can easily
revert this before 2.6.30 to avoid having to maintain this API
forever.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
David Brownell [Thu, 14 May 2009 20:01:59 +0000 (13:01 -0700)]
ASoC: DaVinci EVM board support buildfixes
This is a build fix, resyncing the DaVinci EVM ASoC board code
with the version in the DaVinci tree. That resync includes
support for the DM355 EVM, although that board isn't yet in
mainline.
(NOTE: also includes a bugfix to the platform_add_resources
call, recently sent by Chaithrika U S <chaithrika@ti.com> but
not yet merged into the DaVinci tree.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
David Brownell [Thu, 14 May 2009 19:47:42 +0000 (12:47 -0700)]
ASoC: DaVinci I2S updates
This resyncs the DaVinci I2S code with the version in the DaVinci
tree. The behavioral change uses updated clock interfaces which
recently merged to mainline. Two other changes include adding a
comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in
order to support more boards than just the DM644x EVM.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
David Brownell [Thu, 14 May 2009 19:41:22 +0000 (12:41 -0700)]
ASoC: davinci-pcm buildfixes
This is a buildfix for the DaVinci PCM code, resyncing it with
the version in the DaVinci tree. The notable change is using
current EDMA interfaces, which recently merged to mainline.
(The older interfaces never made it into mainline.)
NOTE: open issue, the DMA should be to/from SRAM; see chip
errata for more info. The artifacts are extremely easy to
hear on DM355 hardware (not yet supported in mainline), but
don't seem as audible on DM6446 hardwaare (which does have
mainline support).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Benjamin Herrenschmidt [Thu, 14 May 2009 20:16:47 +0000 (20:16 +0000)]
powerpc: Fix PCI ROM access
A couple of issues crept in since about 2.6.27 related to accessing PCI
device ROMs on various powerpc machines.
First, historically, we don't allocate the ROM resource in the resource
tree. I'm not entirely certain of why, I susepct they often contained
garbage on x86 but it's hard to tell. This causes the current generic
code to always call pci_assign_resource() when trying to access the said
ROM from sysfs, which will try to re-assign some new address regardless
of what the ROM BAR was already set to at boot time. This can be a
problem on hypervisor platforms like pSeries where we aren't supposed
to move PCI devices around (and in fact probably can't).
Second, our code that generates the PCI tree from the OF device-tree
(instead of doing config space probing) which we mostly use on pseries
at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any
resource. That means that any attempt at re-assigning such a resource
with pci_assign_resource() would fail due to resource_alignment()
returning 0.
This fixes this by doing these two things:
- The code that calculates resource flags based on the OF device-node
is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at
it also set IORESOURCE_READONLY for ROMs since we were lacking that too
- We now allocate ROM resources as part of the resource tree. However
to limit the chances of nasty conflicts due to busted firmwares, we
only do it on the second pass of our two-passes allocation scheme,
so that all valid and enabled BARs get precedence.
This brings pSeries back the ability to access PCI ROMs via sysfs (and
thus initialize various video cards from X etc...).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Thu, 14 May 2009 18:34:06 +0000 (18:34 +0000)]
powerpc/pseries: Really fix the oprofile CPU type on pseries
My previous pach for fixing the oprofile CPU type got somewhat mismerged
(by my fault) when it collided with another related patch. This should
finally (fingers crossed) fix the whole thing.
We make sure we keep the -old- oprofile type and CPU type whenever
one of them was specified in the first pass through the function.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Krill [Wed, 13 May 2009 05:56:54 +0000 (05:56 +0000)]
serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.
The receive interrupt routine checks the wrong register if the
receive fifo is empty. Further an explicit interrupt acknowledge
write is introduced. In some circumstances another interrupt was
issued.
Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gerhard Stenzel [Wed, 13 May 2009 05:50:46 +0000 (05:50 +0000)]
powerpc/cell: Make ptcal more reliable
There have been a series of checkstops on QS21 related to
ptcal being set up incorrectly. On systems that only
have memory on a single node, ptcal fails when it gets
a pointer to memory on the remote node.
Moreover, agressive prefetching in memcpy and other
functions may accidentally touch the first cache line
of the page that we reserve for ptcal, which causes
an ECC checkstop.
We now allocate pages only from the specified node, moves the
ptcal area into the middle of the allocated page to avoid
potential prefetch problems and prints the address of the
ptcal area to facilitate diagnostics.
Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Becky Bruce [Fri, 8 May 2009 12:19:27 +0000 (12:19 +0000)]
powerpc: Allow mem=x cmdline to work with 4G+
We're currently choking on mem=4g (and above) due to memory_limit
being specified as an unsigned long. Make memory_limit
phys_addr_t to fix this.
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Kumar Gala [Fri, 8 May 2009 12:08:20 +0000 (12:08 +0000)]
powerpc/mpic: Fix incorrect allocation of interrupt rev-map
Before when we were setting up the irq host map for mpic we passed in
just isu_size for the size of the linear map. However, for a number of
mpic implementations we have no isu (thus pass in 0) and will end up
with a no linear map (size = 0). This causes us to always call
irq_find_mapping() from mpic_get_irq().
By moving the allocation of the host map to after we've determined the
number of sources we can actually benefit from having a linear map for
the non-isu users that covers all the interrupt sources.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Maynard Johnson [Thu, 7 May 2009 05:48:32 +0000 (05:48 +0000)]
powerpc: Fix oprofile sampling of marked events on POWER7
Description
-----------
Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on
older processors where those bits are defined.
Background
----------
The performance monitor unit of the 64-bit POWER processor family has the
ability to collect accurate instruction-level samples when profiling on marked
events (i.e., "PM_MRK_<event-name>"). In processors prior to POWER6, the MMCRA
register contained "slot information" that the oprofile kernel driver used to
adjust the value latched in the SIAR at the time of a PMU interrupt. But as of
POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use,
since the SIAR itself holds the accurate sampled instruction address. With
POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of
these slot bits was, in effect, a NOP. But with POWER7, these bits are no
longer zero'ed out; however, they serve some other purpose rather than slot
information. Thus, using these bits on POWER7 to adjust the SIAR value results
in samples being attributed to the wrong instructions. The attached patch
changes the oprofile kernel driver to ignore these slot bits on all newer
processors starting with POWER6.
Signed-off-by: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Stephen Rothwell x [Wed, 6 May 2009 14:07:52 +0000 (14:07 +0000)]
powerpc/iseries: Fix pci breakage due to bad dma_data initialization
Commit
4fc665b88a79a45bae8bbf3a05563c27c7337c3d "powerpc: Merge 32 and
64-bit dma code" made changes to the PCI initialisation code that added
an assignment to archdata.dma_data but only for 32 bit code. Commit
7eef440a545c7f812ed10b49d4a10a351df9cad6 "powerpc/pci: Cosmetic cleanups
of pci-common.c" removed the conditional compilation. Unfortunately,
the iSeries code setup the archdata.dma_data before that assignment was
done - effectively overwriting the dma_data with NULL.
Fix this up by moving the iSeries setup of dma_data into a
pci_dma_dev_setup callback.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Timur Tabi [Thu, 30 Apr 2009 18:16:44 +0000 (18:16 +0000)]
powerpc: Fix mktree build error on Mac OS X host
The mktree utility defines some variables as "uint", although this is not a
standard C type, and so cross-compiling on Mac OS X fails. Change this to
"unsigned int".
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Linus Torvalds [Fri, 15 May 2009 02:20:04 +0000 (19:20 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: fix error handling in parse_DFS_referrals