review.tizen.org Git - platform/kernel/linux-rpi.git/log

Revert "r8169: disable ASPM during NAPI poll"

This reverts commit e1ed3e4d91112027b90c7ee61479141b3f948e6a.

Turned out the change causes a performance regression.

Link: https://lore.kernel.org/netdev/20230713124914.GA12924@green245/T/
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/055c6bc2-74fa-8c67-9897-3f658abb5ae7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8169: revert 2ab19de62d67 ("r8169: remove ASPM restrictions now that ASPM is disabled during NAPI poll")

There have been reports that on a number of systems this change breaks
network connectivity. Therefore effectively revert it. Mainly affected
seem to be systems where BIOS denies ASPM access to OS.
Due to later changes we can't do a direct revert.

Fixes: 2ab19de62d67 ("r8169: remove ASPM restrictions now that ASPM is disabled during NAPI poll")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/e47bac0d-e802-65e1-b311-6acb26d5cf10@freenet.de/T/
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217596
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/57f13ec0-b216-d5d8-363d-5b05528ec5fb@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Revert "tcp: avoid the lookup process failing to get sk in ehash table"

This reverts commit 3f4ca5fafc08881d7a57daa20449d171f2887043.

Commit 3f4ca5fafc08 ("tcp: avoid the lookup process failing to get sk in
ehash table") reversed the order in how a socket is inserted into ehash
to fix an issue that ehash-lookup could fail when reqsk/full sk/twsk are
swapped.  However, it introduced another lookup failure.

The full socket in ehash is allocated from a slab with SLAB_TYPESAFE_BY_RCU
and does not have SOCK_RCU_FREE, so the socket could be reused even while
it is being referenced on another CPU doing RCU lookup.

Let's say a socket is reused and inserted into the same hash bucket during
lookup.  After the blamed commit, a new socket is inserted at the end of
the list.  If that happens, we will skip sockets placed after the previous
position of the reused socket, resulting in ehash lookup failure.

As described in Documentation/RCU/rculist_nulls.rst, we should insert a
new socket at the head of the list to avoid such an issue.

This issue, the swap-lookup-failure, and another variant reported in [0]
can all be handled properly by adding a locked ehash lookup suggested by
Eric Dumazet [1].

However, this issue could occur for every packet, thus more likely than
the other two races, so let's revert the change for now.

Link: https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/
Link: https://lore.kernel.org/netdev/CANn89iK8snOz8TYOhhwfimC7ykYA78GA3Nyv8x06SZYa1nKdyA@mail.gmail.com/
Fixes: 3f4ca5fafc08 ("tcp: avoid the lookup process failing to get sk in ehash table")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717215918.15723-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2023-07-19

We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 55 insertions(+), 10 deletions(-).

The main changes are:

1) Fix stack depth check in presence of async callbacks,
   from Kumar Kartikeya Dwivedi.

2) Fix BTI type used for freplace attached functions,
   from Alexander Duyck.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, arm64: Fix BTI type used for freplace attached functions
  selftests/bpf: Add more tests for check_max_stack_depth bug
  bpf: Repeat check_max_stack_depth for async callbacks
  bpf: Fix subprog idx logic in check_max_stack_depth
====================

Link: https://lore.kernel.org/r/20230719174502.74023-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv4: ip_gre: fix return value check in erspan_xmit()

goto free_skb if an unexpected result is returned by pskb_tirm()
in erspan_xmit().

Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: ip_gre: fix return value check in erspan_fb_xmit()

goto err_free_skb if an unexpected result is returned by pskb_tirm()
in erspan_fb_xmit().

Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers:net: fix return value check in ocelot_fdma_receive_skb

ocelot_fdma_receive_skb should return false if an unexpected
value is returned by pskb_trim.

Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers: net: fix return value check in emac_tso_csum()

in emac_tso_csum(), return an error code if an unexpected value
is returned by pskb_trim().

Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net:ipv6: check return value of pskb_trim()

goto tx_err if an unexpected result is returned by pskb_tirm()
in ip6erspan_tunnel_xmit().

Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv4: Use kfree_sensitive instead of kfree

key might contain private part of the key, so better use
kfree_sensitive to free it.

Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP")
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-07-17 (iavf)

This series contains updates to iavf driver only.

Ding Hui fixes use-after-free issue by calling netif_napi_del() for all
allocated q_vectors. He also resolves out-of-bounds issue by not
updating to new values when timeout is encountered.

Marcin and Ahmed change the way resets are handled so that the callback
operating under the RTNL lock will wait for the reset to finish, the
rtnl_lock sensitive functions in reset flow will schedule the netdev update
for later in order to remove circular dependency with the critical lock.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: fix reset task race with iavf_remove()
  iavf: fix a deadlock caused by rtnl and driver's lock circular dependencies
  Revert "iavf: Do not restart Tx queues after reset task failure"
  Revert "iavf: Detach device during reset task"
  iavf: Wait for reset in callbacks which trigger it
  iavf: use internal state to free traffic IRQs
  iavf: Fix out-of-bounds when setting channels on remove
  iavf: Fix use-after-free in free_netdev
====================

Link: https://lore.kernel.org/r/20230717175205.3217774-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'tcp-annotate-data-races-in-tcp_rsk-req'

Eric Dumazet says:

====================
tcp: annotate data-races in tcp_rsk(req)

Small series addressing two syzbot reports around tcp_rsk(req)
====================

Link: https://lore.kernel.org/r/20230717144445.653164-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tcp_rsk(req)->ts_recent

TCP request sockets are lockless, tcp_rsk(req)->ts_recent
can change while being read by another cpu as syzbot noticed.

This is harmless, but we should annotate the known races.

Note that tcp_check_req() changes req->ts_recent a bit early,
we might change this in the future.

BUG: KCSAN: data-race in tcp_check_req / tcp_check_req

write to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 1:
tcp_check_req+0x694/0xc70 net/ipv4/tcp_minisocks.c:762
tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071
ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:468 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5493 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
do_softirq+0x7e/0xb0 kernel/softirq.c:472
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:396
local_bh_enable+0x1f/0x20 include/linux/bottom_half.h:33
rcu_read_unlock_bh include/linux/rcupdate.h:843 [inline]
__dev_queue_xmit+0xabb/0x1d10 net/core/dev.c:4271
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_hh_output include/net/neighbour.h:528 [inline]
neigh_output include/net/neighbour.h:542 [inline]
ip_finish_output2+0x700/0x840 net/ipv4/ip_output.c:229
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:431
dst_output include/net/dst.h:458 [inline]
ip_local_out net/ipv4/ip_output.c:126 [inline]
__ip_queue_xmit+0xa4d/0xa70 net/ipv4/ip_output.c:533
ip_queue_xmit+0x38/0x40 net/ipv4/ip_output.c:547
__tcp_transmit_skb+0x1194/0x16e0 net/ipv4/tcp_output.c:1399
tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
tcp_write_xmit+0x13ff/0x2fd0 net/ipv4/tcp_output.c:2693
__tcp_push_pending_frames+0x6a/0x1a0 net/ipv4/tcp_output.c:2877
tcp_push_pending_frames include/net/tcp.h:1952 [inline]
__tcp_sock_set_cork net/ipv4/tcp.c:3336 [inline]
tcp_sock_set_cork+0xe8/0x100 net/ipv4/tcp.c:3343
rds_tcp_xmit_path_complete+0x3b/0x40 net/rds/tcp_send.c:52
rds_send_xmit+0xf8d/0x1420 net/rds/send.c:422
rds_send_worker+0x42/0x1d0 net/rds/threads.c:200
process_one_work+0x3e6/0x750 kernel/workqueue.c:2408
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2555
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

read to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 0:
tcp_check_req+0x32a/0xc70 net/ipv4/tcp_minisocks.c:622
tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071
ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:468 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5493 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
run_ksoftirqd+0x17/0x20 kernel/softirq.c:939
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

value changed: 0x1cd237f1 -> 0x1cd237f2

Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717144445.653164-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp: annotate data-races around tcp_rsk(req)->txhash

TCP request sockets are lockless, some of their fields
can change while being read by another cpu as syzbot noticed.

This is usually harmless, but we should annotate the known
races.

This patch takes care of tcp_rsk(req)->txhash,
a separate one is needed for tcp_rsk(req)->ts_recent.

BUG: KCSAN: data-race in tcp_make_synack / tcp_rtx_synack

write to 0xffff8881362304bc of 4 bytes by task 32083 on cpu 1:
tcp_rtx_synack+0x9d/0x2a0 net/ipv4/tcp_output.c:4213
inet_rtx_syn_ack+0x38/0x80 net/ipv4/inet_connection_sock.c:880
tcp_check_req+0x379/0xc70 net/ipv4/tcp_minisocks.c:665
tcp_v6_rcv+0x125b/0x1b20 net/ipv6/tcp_ipv6.c:1673
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
netif_receive_skb_internal net/core/dev.c:5652 [inline]
netif_receive_skb+0x4a/0x310 net/core/dev.c:5711
tun_rx_batched+0x3bf/0x400
tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997
tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x4ab/0x7d0 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff8881362304bc of 4 bytes by task 32078 on cpu 0:
tcp_make_synack+0x367/0xb40 net/ipv4/tcp_output.c:3663
tcp_v6_send_synack+0x72/0x420 net/ipv6/tcp_ipv6.c:544
tcp_conn_request+0x11a8/0x1560 net/ipv4/tcp_input.c:7059
tcp_v6_conn_request+0x13f/0x180 net/ipv6/tcp_ipv6.c:1175
tcp_rcv_state_process+0x156/0x1de0 net/ipv4/tcp_input.c:6494
tcp_v6_do_rcv+0x98a/0xb70 net/ipv6/tcp_ipv6.c:1509
tcp_v6_rcv+0x17b8/0x1b20 net/ipv6/tcp_ipv6.c:1735
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
netif_receive_skb_internal net/core/dev.c:5652 [inline]
netif_receive_skb+0x4a/0x310 net/core/dev.c:5711
tun_rx_batched+0x3bf/0x400
tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997
tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x4ab/0x7d0 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x91d25731 -> 0xe79325cd

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32078 Comm: syz-executor.4 Not tainted 6.5.0-rc1-syzkaller-00033-geb26cbb1a754 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023

Fixes: 58d607d3e52f ("tcp: provide skb->hash to synack packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717144445.653164-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-pf: mcs: Generate hash key using ecb(aes)

Hardware generated encryption and ICV tags are found to
be wrong when tested with IEEE MACSEC test vectors.
This is because as per the HRM, the hash key (derived by
AES-ECB block encryption of an all 0s block with the SAK)
has to be programmed by the software in
MCSX_RS_MCS_CPM_TX_SLAVE_SA_PLCY_MEM_4X register.
Hence fix this by generating hash key in software and
configuring in hardware.

Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/1689574603-28093-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

igc: Prevent garbled TX queue with XDP ZEROCOPY

In normal operation, each populated queue item has
next_to_watch pointing to the last TX desc of the packet,
while each cleaned item has it set to 0. In particular,
next_to_use that points to the next (necessarily clean)
item to use has next_to_watch set to 0.

When the TX queue is used both by an application using
AF_XDP with ZEROCOPY as well as a second non-XDP application
generating high traffic, the queue pointers can get in
an invalid state where next_to_use points to an item
where next_to_watch is NOT set to 0.

However, the implementation assumes at several places
that this is never the case, so if it does hold,
bad things happen. In particular, within the loop inside
of igc_clean_tx_irq(), next_to_clean can overtake next_to_use.
Finally, this prevents any further transmission via
this queue and it never gets unblocked or signaled.
Secondly, if the queue is in this garbled state,
the inner loop of igc_clean_tx_ring() will never terminate,
completely hogging a CPU core.

The reason is that igc_xdp_xmit_zc() reads next_to_use
before acquiring the lock, and writing it back
(potentially unmodified) later. If it got modified
before locking, the outdated next_to_use is written
pointing to an item that was already used elsewhere
(and thus next_to_watch got written).

Fixes: 9acf59a752d4 ("igc: Enable TX via AF_XDP zero-copy")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-fixes-for-6.5-20230717' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2023-07-17

The 1st patch is by Ziyang Xuan and fixes a possible memory leak in
the receiver handling in the CAN RAW protocol.

YueHaibing contributes a use after free in bcm_proc_show() of the
Broad Cast Manager (BCM) CAN protocol.

The next 2 patches are by me and fix a possible null pointer
dereference in the RX path of the gs_usb driver with activated
hardware timestamps and the candlelight firmware.

The last patch is by Fedor Ross, Marek Vasut and me and targets the
mcp251xfd driver. The polling timeout of __mcp251xfd_chip_set_mode()
is increased to fix bus joining on busy CAN buses and very low bit
rate.

* tag 'linux-can-fixes-for-6.5-20230717' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout
  can: gs_usb: fix time stamp counter initialization
  can: gs_usb: gs_can_open(): improve error handling
  can: bcm: Fix UAF in bcm_proc_show()
  can: raw: fix receiver memory leak
====================

Link: https://lore.kernel.org/r/20230717180938.230816-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mailmap: Add entry for old intel email

Fix old email to avoid bouncing email from net/drivers and older
netdev work. Anyways my @intel email hasn't been active for years.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230717173306.38407-1-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mailmap: add entries for past lives

Update old emails for my current work email.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230717193242.43670-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'selftests-tc-increase-timeout-and-add-missing-kconfig'

Matthieu Baerts says:

====================
selftests: tc: increase timeout and add missing kconfig

When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:

not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds

I also noticed most of the tests were skipped because the "teardown
stage" did not complete successfully. It was due to missing kconfig.

These patches fix these two errors plus an extra one because this
selftest reads info from "/proc/net/nf_conntrack". Thank you Pedro for
having helped me fixing these issues [2].

Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/
====================

Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-0-1eb4fd3a96e7@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: tc: add ConnTrack procfs kconfig

When looking at the TC selftest reports, I noticed one test was failing
because /proc/net/nf_conntrack was not available.

  not ok 373 3992 - Add ct action triggering DNAT tuple conflict
   Could not match regex pattern. Verify command output:
  cat: /proc/net/nf_conntrack: No such file or directory

It is only available if NF_CONNTRACK_PROCFS kconfig is set. So the issue
can be fixed simply by adding it to the list of required kconfig.

Fixes: e46905641316 ("tc-testing: add test for ct DNAT tuple collision")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-3-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: tc: add 'ct' action kconfig dep

When looking for something else in LKFT reports [1], I noticed most of
the tests were skipped because the "teardown stage" did not complete
successfully.

Pedro found out this is due to the fact CONFIG_NF_FLOW_TABLE is required
but not listed in the 'config' file. Adding it to the list fixes the
issues on LKFT side. CONFIG_NET_ACT_CT is now set to 'm' in the final
kconfig.

Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/
Suggested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-2-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: tc: set timeout to 15 minutes

When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:

not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds

The timeout had been introduced 3 years ago, see the Fixes commit below.

This timeout is only in place when executing the selftests via the
kselftests runner scripts. I guess this is not what most TC devs are
using and nobody noticed the issue before.

The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks
like it is plenty more time than what it takes in "normal" conditions.

Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/
Suggested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-1-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bpf, arm64: Fix BTI type used for freplace attached functions

When running an freplace attached bpf program on an arm64 system w were
seeing the following issue:
Unhandled 64-bit el1h sync exception on CPU47, ESR 0x0000000036000003 -- BTI

After a bit of work to track it down I determined that what appeared to be
happening is that the 'bti c' at the start of the program was somehow being
reached after a 'br' instruction. Further digging pointed me toward the
fact that the function was attached via freplace. This in turn led me to
build_plt which I believe is invoking the long jump which is triggering
this error.

To resolve it we can replace the 'bti c' with 'bti jc' and add a comment
explaining why this has to be modified as such.

Fixes: b2ad54e1533e ("bpf, arm64: Implement bpf_arch_text_poke() for arm64")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/168926677665.316237.9953845318337455525.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge branch 'two-more-fixes-for-check_max_stack_depth'

Kumar Kartikeya Dwivedi says:

====================
Two more fixes for check_max_stack_depth

I noticed two more bugs while reviewing the code, description and
examples available in the patches.

One leads to incorrect subprog index to be stored in the frame stack
maintained by the function (leading to incorrect tail_call_reachable
marks, among other things).

The other problem is missing exploration pass of other async callbacks
when they are not called from the main prog. Call chains rooted at them
can thus bypass the stack limits (32 call frames * max permitted stack
depth per function).

Changelog:
----------
v1 -> v2
v1: https://lore.kernel.org/bpf/20230713003118.1327943-1-memxor@gmail.com

* Fix commit message for patch 2 (Alexei)
====================

Link: https://lore.kernel.org/r/20230717161530.1238-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

selftests/bpf: Add more tests for check_max_stack_depth bug

Another test which now exercies the path of the verifier where it will
explore call chains rooted at the async callback. Without the prior
fixes, this program loads successfully, which is incorrect.

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Repeat check_max_stack_depth for async callbacks

While the check_max_stack_depth function explores call chains emanating
from the main prog, which is typically enough to cover all possible call
chains, it doesn't explore those rooted at async callbacks unless the
async callback will have been directly called, since unlike non-async
callbacks it skips their instruction exploration as they don't
contribute to stack depth.

It could be the case that the async callback leads to a callchain which
exceeds the stack depth, but this is never reachable while only
exploring the entry point from main subprog. Hence, repeat the check for
the main subprog *and* all async callbacks marked by the symbolic
execution pass of the verifier, as execution of the program may begin at
any of them.

Consider functions with following stack depths:
main: 256
async: 256
foo: 256

main:
    rX = async
    bpf_timer_set_callback(...)

async:
    foo()

Here, async is not descended as it does not contribute to stack depth of
main (since it is referenced using bpf_pseudo_func and not
bpf_pseudo_call). However, when async is invoked asynchronously, it will
end up breaching the MAX_BPF_STACK limit by calling foo.

Hence, in addition to main, we also need to explore call chains
beginning at all async callback subprogs in a program.

Fixes: 7ddc80a476c2 ("bpf: Teach stack depth check about async callbacks.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix subprog idx logic in check_max_stack_depth

The assignment to idx in check_max_stack_depth happens once we see a
bpf_pseudo_call or bpf_pseudo_func. This is not an issue as the rest of
the code performs a few checks and then pushes the frame to the frame
stack, except the case of async callbacks. If the async callback case
causes the loop iteration to be skipped, the idx assignment will be
incorrect on the next iteration of the loop. The value stored in the
frame stack (as the subprogno of the current subprog) will be incorrect.

This leads to incorrect checks and incorrect tail_call_reachable
marking. Save the target subprog in a new variable and only assign to
idx once we are done with the is_async_cb check which may skip pushing
of frame to the frame stack and subsequent stack depth checks and tail
call markings.

Fixes: 7ddc80a476c2 ("bpf: Teach stack depth check about async callbacks.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

octeontx2-pf: Dont allocate BPIDs for LBK interfaces

Current driver enables backpressure for LBK interfaces.
But these interfaces do not support this feature.
Hence, this patch fixes the issue by skipping the
backpressure configuration for these interfaces.

Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20230716093741.28063-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

vrf: Fix lockdep splat in output path

Cited commit converted the neighbour code to use the standard RCU
variant instead of the RCU-bh variant, but the VRF code still uses
rcu_read_lock_bh() / rcu_read_unlock_bh() around the neighbour lookup
code in its IPv4 and IPv6 output paths, resulting in lockdep splats
[1][2]. Can be reproduced using [3].

Fix by switching to rcu_read_lock() / rcu_read_unlock().

[1]
=============================
WARNING: suspicious RCU usage
6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted
-----------------------------
include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ping/183:
#0: ffff888105ea1d80 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xc6c/0x33c0
#1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output+0x2e3/0x2030

stack backtrace:
CPU: 0 PID: 183 Comm: ping Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc1/0xf0
lockdep_rcu_suspicious+0x211/0x3b0
vrf_output+0x1380/0x2030
ip_push_pending_frames+0x125/0x2a0
raw_sendmsg+0x200d/0x33c0
inet_sendmsg+0xa2/0xe0
__sys_sendto+0x2aa/0x420
__x64_sys_sendto+0xe5/0x1c0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

[2]
=============================
WARNING: suspicious RCU usage
6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted
-----------------------------
include/net/neighbour.h:302 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ping6/182:
#0: ffff888114b63000 (sk_lock-AF_INET6){+.+.}-{0:0}, at: rawv6_sendmsg+0x1602/0x3e50
#1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output6+0xe9/0x1310

stack backtrace:
CPU: 0 PID: 182 Comm: ping6 Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc1/0xf0
lockdep_rcu_suspicious+0x211/0x3b0
vrf_output6+0xd32/0x1310
ip6_local_out+0xb4/0x1a0
ip6_send_skb+0xbc/0x340
ip6_push_pending_frames+0xe5/0x110
rawv6_sendmsg+0x2e6e/0x3e50
inet_sendmsg+0xa2/0xe0
__sys_sendto+0x2aa/0x420
__x64_sys_sendto+0xe5/0x1c0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

[3]
#!/bin/bash

ip link add name vrf-red up numtxqueues 2 type vrf table 10
ip link add name swp1 up master vrf-red type dummy
ip address add 192.0.2.1/24 dev swp1
ip address add 2001:db8:1::1/64 dev swp1
ip neigh add 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm dev swp1
ip neigh add 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm dev swp1
ip vrf exec vrf-red ping 192.0.2.2 -c 1 &> /dev/null
ip vrf exec vrf-red ping6 2001:db8:1::2 -c 1 &> /dev/null

Fixes: 09eed1192cec ("neighbour: switch to standard rcu, instead of rcu_bh")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/netdev/CA+G9fYtEr-=GbcXNDYo3XOkwR+uYgehVoDjsP0pFLUpZ_AZcyg@mail.gmail.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230715153605.4068066-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-07-14 (ice)

This series contains updates to ice driver only.

Petr Oros removes multiple calls made to unregister netdev and
devlink_port.

Michal fixes null pointer dereference that can occur during reload.
====================

Link: https://lore.kernel.org/r/20230714201041.1717834-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout

The mcp251xfd controller needs an idle bus to enter 'Normal CAN 2.0
mode' or . The maximum length of a CAN frame is 736 bits (64 data
bytes, CAN-FD, EFF mode, worst case bit stuffing and interframe
spacing). For low bit rates like 10 kbit/s the arbitrarily chosen
MCP251XFD_POLL_TIMEOUT_US of 1 ms is too small.

Otherwise during polling for the CAN controller to enter 'Normal CAN
2.0 mode' the timeout limit is exceeded and the configuration fails
with:

| $ ip link set dev can1 up type can bitrate 10000
| [  731.911072] mcp251xfd spi2.1 can1: Controller failed to enter mode CAN 2.0 Mode (6) and stays in Configuration Mode (4) (con=0x068b0760, osc=0x00000468).
| [  731.927192] mcp251xfd spi2.1 can1: CRC read error at address 0x0e0c (length=4, data=00 00 00 00, CRC=0x0000) retrying.
| [  731.938101] A link change request failed with some changes committed already. Interface can1 may have been left with an inconsistent configuration, please check.
| RTNETLINK answers: Connection timed out

Make MCP251XFD_POLL_TIMEOUT_US timeout calculation dynamic. Use
maximum of 1ms and bit time of 1 full 64 data bytes CAN-FD frame in
EFF mode, worst case bit stuffing and interframe spacing at the
current bit rate.

For easier backporting define the macro MCP251XFD_FRAME_LEN_MAX_BITS
that holds the max frame length in bits, which is 736. This can be
replaced by can_frame_bits(true, true, true, true, CANFD_MAX_DLEN) in
a cleanup patch later.

Fixes: 55e5b97f003e8 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Signed-off-by: Fedor Ross <fedor.ross@ifm.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20230717-mcp251xfd-fix-increase-poll-timeout-v5-1-06600f34c684@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

iavf: fix reset task race with iavf_remove()

The reset task is currently scheduled from the watchdog or adminq tasks.
First, all direct calls to schedule the reset task are replaced with the
iavf_schedule_reset(), which is modified to accept the flag showing the
type of reset.

To prevent the reset task from starting once iavf_remove() starts, we need
to check the __IAVF_IN_REMOVE_TASK bit before we schedule it. This is now
easily added to iavf_schedule_reset().

Finally, remove the check for IAVF_FLAG_RESET_NEEDED in the watchdog task.
It is redundant since all callers who set the flag immediately schedules
the reset task.

Fixes: 3ccd54ef44eb ("iavf: Fix init state closure on remove")
Fixes: 14756b2ae265 ("iavf: Fix __IAVF_RESETTING state usage")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

iavf: fix a deadlock caused by rtnl and driver's lock circular dependencies

A driver's lock (crit_lock) is used to serialize all the driver's tasks.
Lockdep, however, shows a circular dependency between rtnl and
crit_lock. This happens when an ndo that already holds the rtnl requests
the driver to reset, since the reset task (in some paths) tries to grab
rtnl to either change real number of queues of update netdev features.

  [566.241851] ======================================================
  [566.241893] WARNING: possible circular locking dependency detected
  [566.241936] 6.2.14-100.fc36.x86_64+debug #1 Tainted: G           OE
  [566.241984] ------------------------------------------------------
  [566.242025] repro.sh/2604 is trying to acquire lock:
  [566.242061] ffff9280fc5ceee8 (&adapter->crit_lock){+.+.}-{3:3}, at: iavf_close+0x3c/0x240 [iavf]
  [566.242167]
               but task is already holding lock:
  [566.242209] ffffffff9976d350 (rtnl_mutex){+.+.}-{3:3}, at: iavf_remove+0x6b5/0x730 [iavf]
  [566.242300]
               which lock already depends on the new lock.

  [566.242353]
               the existing dependency chain (in reverse order) is:
  [566.242401]
               -> #1 (rtnl_mutex){+.+.}-{3:3}:
  [566.242451]        __mutex_lock+0xc1/0xbb0
  [566.242489]        iavf_init_interrupt_scheme+0x179/0x440 [iavf]
  [566.242560]        iavf_watchdog_task+0x80b/0x1400 [iavf]
  [566.242627]        process_one_work+0x2b3/0x560
  [566.242663]        worker_thread+0x4f/0x3a0
  [566.242696]        kthread+0xf2/0x120
  [566.242730]        ret_from_fork+0x29/0x50
  [566.242763]
               -> #0 (&adapter->crit_lock){+.+.}-{3:3}:
  [566.242815]        __lock_acquire+0x15ff/0x22b0
  [566.242869]        lock_acquire+0xd2/0x2c0
  [566.242901]        __mutex_lock+0xc1/0xbb0
  [566.242934]        iavf_close+0x3c/0x240 [iavf]
  [566.242997]        __dev_close_many+0xac/0x120
  [566.243036]        dev_close_many+0x8b/0x140
  [566.243071]        unregister_netdevice_many_notify+0x165/0x7c0
  [566.243116]        unregister_netdevice_queue+0xd3/0x110
  [566.243157]        iavf_remove+0x6c1/0x730 [iavf]
  [566.243217]        pci_device_remove+0x33/0xa0
  [566.243257]        device_release_driver_internal+0x1bc/0x240
  [566.243299]        pci_stop_bus_device+0x6c/0x90
  [566.243338]        pci_stop_and_remove_bus_device+0xe/0x20
  [566.243380]        pci_iov_remove_virtfn+0xd1/0x130
  [566.243417]        sriov_disable+0x34/0xe0
  [566.243448]        ice_free_vfs+0x2da/0x330 [ice]
  [566.244383]        ice_sriov_configure+0x88/0xad0 [ice]
  [566.245353]        sriov_numvfs_store+0xde/0x1d0
  [566.246156]        kernfs_fop_write_iter+0x15e/0x210
  [566.246921]        vfs_write+0x288/0x530
  [566.247671]        ksys_write+0x74/0xf0
  [566.248408]        do_syscall_64+0x58/0x80
  [566.249145]        entry_SYSCALL_64_after_hwframe+0x72/0xdc
  [566.249886]
                 other info that might help us debug this:

  [566.252014]  Possible unsafe locking scenario:

  [566.253432]        CPU0                    CPU1
  [566.254118]        ----                    ----
  [566.254800]   lock(rtnl_mutex);
  [566.255514]                                lock(&adapter->crit_lock);
  [566.256233]                                lock(rtnl_mutex);
  [566.256897]   lock(&adapter->crit_lock);
  [566.257388]
                  *** DEADLOCK ***

The deadlock can be triggered by a script that is continuously resetting
the VF adapter while doing other operations requiring RTNL, e.g:

while :; do
ip link set $VF up
ethtool --set-channels $VF combined 2
ip link set $VF down
ip link set $VF up
ethtool --set-channels $VF combined 4
ip link set $VF down
done

Any operation that triggers a reset can substitute "ethtool --set-channles"

As a fix, add a new task "finish_config" that do all the work which
needs rtnl lock. With the exception of iavf_remove(), all work that
require rtnl should be called from this task.

As for iavf_remove(), at the point where we need to call
unregister_netdevice() (and grab rtnl_lock), we make sure the finish_config
task is not running (cancel_work_sync()) to safely grab rtnl. Subsequent
finish_config work cannot restart after that since the task is guarded
by the __IAVF_IN_REMOVE_TASK bit in iavf_schedule_finish_config().

Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Revert "iavf: Do not restart Tx queues after reset task failure"

This reverts commit 08f1c147b7265245d67321585c68a27e990e0c4b.

Netdev is no longer being detached during reset, so this fix can be
reverted. We leave the removal of "hacky" IFF_UP flag update.

Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Revert "iavf: Detach device during reset task"

This reverts commit aa626da947e9cd30c4cf727493903e1adbb2c0a0.

Detaching device during reset was not fully fixing the rtnl locking issue,
as there could be a situation where callback was already in progress before
detaching netdev.

Furthermore, detaching netdevice causes TX timeouts if traffic is running.
To reproduce:

ip netns exec ns1 iperf3 -c $PEER_IP -t 600 --logfile /dev/null &
while :; do
        for i in 200 7000 400 5000 300 3000 ; do
ip netns exec ns1 ip link set $VF1 mtu $i
                sleep 2
        done
        sleep 10
done

Currently, callbacks such as iavf_change_mtu() wait for the reset.
If the reset fails to acquire the rtnl_lock, they schedule the netdev
update for later while continuing the reset flow. Operations like MTU
changes are performed under the rtnl_lock. Therefore, when the operation
finishes, another callback that uses rtnl_lock can start.

Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

iavf: Wait for reset in callbacks which trigger it

There was a fail when trying to add the interface to bonding
right after changing the MTU on the interface. It was caused
by bonding interface unable to open the interface due to
interface being in __RESETTING state because of MTU change.

Add new reset_waitqueue to indicate that reset has finished.

Add waiting for reset to finish in callbacks which trigger hw reset:
iavf_set_priv_flags(), iavf_change_mtu() and iavf_set_ringparam().
We use a 5000ms timeout period because on Hyper-V based systems,
this operation takes around 3000-4000ms. In normal circumstances,
it doesn't take more than 500ms to complete.

Add a function iavf_wait_for_reset() to reuse waiting for reset code and
use it also in iavf_set_channels(), which already waits for reset.
We don't use error handling in iavf_set_channels() as this could
cause the device to be in incorrect state if the reset was scheduled
but hit timeout or the waitng function was interrupted by a signal.

Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Co-developed-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

iavf: use internal state to free traffic IRQs

If the system tries to close the netdev while iavf_reset_task() is
running, __LINK_STATE_START will be cleared and netif_running() will
return false in iavf_reinit_interrupt_scheme(). This will result in
iavf_free_traffic_irqs() not being called and a leak as follows:

[7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0'
[7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0

is shown when pci_disable_msix() is later called. Fix by using the
internal adapter state. The traffic IRQs will always exist if
state == __IAVF_RUNNING.

Fixes: 5b36e8d04b44 ("i40evf: Enable VF to request an alternate queue allocation")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

iavf: Fix out-of-bounds when setting channels on remove

If we set channels greater during iavf_remove(), and waiting reset done
would be timeout, then returned with error but changed num_active_queues
directly, that will lead to OOB like the following logs. Because the
num_active_queues is greater than tx/rx_rings[] allocated actually.

Reproducer:

  [root@host ~]# cat repro.sh
  #!/bin/bash

  pf_dbsf="0000:41:00.0"
  vf0_dbsf="0000:41:02.0"
  g_pids=()

  function do_set_numvf()
  {
      echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
      sleep $((RANDOM%3+1))
      echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
      sleep $((RANDOM%3+1))
  }

  function do_set_channel()
  {
      local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/)
      [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; }
      ifconfig $nic 192.168.18.5 netmask 255.255.255.0
      ifconfig $nic up
      ethtool -L $nic combined 1
      ethtool -L $nic combined 4
      sleep $((RANDOM%3))
  }

  function on_exit()
  {
      local pid
      for pid in "${g_pids[@]}"; do
          kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null
      done
      g_pids=()
  }

  trap "on_exit; exit" EXIT

  while :; do do_set_numvf ; done &
  g_pids+=($!)
  while :; do do_set_channel ; done &
  g_pids+=($!)

  wait

Result:

[ 3506.152887] iavf 0000:41:02.0: Removing device
[ 3510.400799] ==================================================================
[ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536
[ 3510.400823]
[ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G           O     --------- -t - 4.18.0 #1
[ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021
[ 3510.400835] Call Trace:
[ 3510.400851]  dump_stack+0x71/0xab
[ 3510.400860]  print_address_description+0x6b/0x290
[ 3510.400865]  ? iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400868]  kasan_report+0x14a/0x2b0
[ 3510.400873]  iavf_free_all_tx_resources+0x156/0x160 [iavf]
[ 3510.400880]  iavf_remove+0x2b6/0xc70 [iavf]
[ 3510.400884]  ? iavf_free_all_rx_resources+0x160/0x160 [iavf]
[ 3510.400891]  ? wait_woken+0x1d0/0x1d0
[ 3510.400895]  ? notifier_call_chain+0xc1/0x130
[ 3510.400903]  pci_device_remove+0xa8/0x1f0
[ 3510.400910]  device_release_driver_internal+0x1c6/0x460
[ 3510.400916]  pci_stop_bus_device+0x101/0x150
[ 3510.400919]  pci_stop_and_remove_bus_device+0xe/0x20
[ 3510.400924]  pci_iov_remove_virtfn+0x187/0x420
[ 3510.400927]  ? pci_iov_add_virtfn+0xe10/0xe10
[ 3510.400929]  ? pci_get_subsys+0x90/0x90
[ 3510.400932]  sriov_disable+0xed/0x3e0
[ 3510.400936]  ? bus_find_device+0x12d/0x1a0
[ 3510.400953]  i40e_free_vfs+0x754/0x1210 [i40e]
[ 3510.400966]  ? i40e_reset_all_vfs+0x880/0x880 [i40e]
[ 3510.400968]  ? pci_get_device+0x7c/0x90
[ 3510.400970]  ? pci_get_subsys+0x90/0x90
[ 3510.400982]  ? pci_vfs_assigned.part.7+0x144/0x210
[ 3510.400987]  ? __mutex_lock_slowpath+0x10/0x10
[ 3510.400996]  i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 3510.401001]  sriov_numvfs_store+0x214/0x290
[ 3510.401005]  ? sriov_totalvfs_show+0x30/0x30
[ 3510.401007]  ? __mutex_lock_slowpath+0x10/0x10
[ 3510.401011]  ? __check_object_size+0x15a/0x350
[ 3510.401018]  kernfs_fop_write+0x280/0x3f0
[ 3510.401022]  vfs_write+0x145/0x440
[ 3510.401025]  ksys_write+0xab/0x160
[ 3510.401028]  ? __ia32_sys_read+0xb0/0xb0
[ 3510.401031]  ? fput_many+0x1a/0x120
[ 3510.401032]  ? filp_close+0xf0/0x130
[ 3510.401038]  do_syscall_64+0xa0/0x370
[ 3510.401041]  ? page_fault+0x8/0x30
[ 3510.401043]  entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 3510.401073] RIP: 0033:0x7f3a9bb842c0
[ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24
[ 3510.401080] RSP: 002b:00007ffc05f1fe18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 3510.401083] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3a9bb842c0
[ 3510.401085] RDX: 0000000000000002 RSI: 0000000002327408 RDI: 0000000000000001
[ 3510.401086] RBP: 0000000002327408 R08: 00007f3a9be53780 R09: 00007f3a9c8a4700
[ 3510.401086] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002
[ 3510.401087] R13: 0000000000000001 R14: 00007f3a9be52620 R15: 0000000000000001
[ 3510.401090]
[ 3510.401093] Allocated by task 76795:
[ 3510.401098]  kasan_kmalloc+0xa6/0xd0
[ 3510.401099]  __kmalloc+0xfb/0x200
[ 3510.401104]  iavf_init_interrupt_scheme+0x26f/0x1310 [iavf]
[ 3510.401108]  iavf_watchdog_task+0x1d58/0x4050 [iavf]
[ 3510.401114]  process_one_work+0x56a/0x11f0
[ 3510.401115]  worker_thread+0x8f/0xf40
[ 3510.401117]  kthread+0x2a0/0x390
[ 3510.401119]  ret_from_fork+0x1f/0x40
[ 3510.401122]  0xffffffffffffffff
[ 3510.401123]

In timeout handling, we should keep the original num_active_queues
and reset num_req_queues to 0.

Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: Donglin Peng <pengdonglin@sangfor.com.cn>
Cc: Huang Cun <huangcun@sangfor.com.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

iavf: Fix use-after-free in free_netdev

We do netif_napi_add() for all allocated q_vectors[], but potentially
do netif_napi_del() for part of them, then kfree q_vectors and leave
invalid pointers at dev->napi_list.

Reproducer:

  [root@host ~]# cat repro.sh
  #!/bin/bash

  pf_dbsf="0000:41:00.0"
  vf0_dbsf="0000:41:02.0"
  g_pids=()

  function do_set_numvf()
  {
      echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
      sleep $((RANDOM%3+1))
      echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
      sleep $((RANDOM%3+1))
  }

  function do_set_channel()
  {
      local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/)
      [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; }
      ifconfig $nic 192.168.18.5 netmask 255.255.255.0
      ifconfig $nic up
      ethtool -L $nic combined 1
      ethtool -L $nic combined 4
      sleep $((RANDOM%3))
  }

  function on_exit()
  {
      local pid
      for pid in "${g_pids[@]}"; do
          kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null
      done
      g_pids=()
  }

  trap "on_exit; exit" EXIT

  while :; do do_set_numvf ; done &
  g_pids+=($!)
  while :; do do_set_channel ; done &
  g_pids+=($!)

  wait

Result:

[ 4093.900222] ==================================================================
[ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390
[ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699
[ 4093.900233]
[ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G           O     --------- -t - 4.18.0 #1
[ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021
[ 4093.900239] Call Trace:
[ 4093.900244]  dump_stack+0x71/0xab
[ 4093.900249]  print_address_description+0x6b/0x290
[ 4093.900251]  ? free_netdev+0x308/0x390
[ 4093.900252]  kasan_report+0x14a/0x2b0
[ 4093.900254]  free_netdev+0x308/0x390
[ 4093.900261]  iavf_remove+0x825/0xd20 [iavf]
[ 4093.900265]  pci_device_remove+0xa8/0x1f0
[ 4093.900268]  device_release_driver_internal+0x1c6/0x460
[ 4093.900271]  pci_stop_bus_device+0x101/0x150
[ 4093.900273]  pci_stop_and_remove_bus_device+0xe/0x20
[ 4093.900275]  pci_iov_remove_virtfn+0x187/0x420
[ 4093.900277]  ? pci_iov_add_virtfn+0xe10/0xe10
[ 4093.900278]  ? pci_get_subsys+0x90/0x90
[ 4093.900280]  sriov_disable+0xed/0x3e0
[ 4093.900282]  ? bus_find_device+0x12d/0x1a0
[ 4093.900290]  i40e_free_vfs+0x754/0x1210 [i40e]
[ 4093.900298]  ? i40e_reset_all_vfs+0x880/0x880 [i40e]
[ 4093.900299]  ? pci_get_device+0x7c/0x90
[ 4093.900300]  ? pci_get_subsys+0x90/0x90
[ 4093.900306]  ? pci_vfs_assigned.part.7+0x144/0x210
[ 4093.900309]  ? __mutex_lock_slowpath+0x10/0x10
[ 4093.900315]  i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 4093.900318]  sriov_numvfs_store+0x214/0x290
[ 4093.900320]  ? sriov_totalvfs_show+0x30/0x30
[ 4093.900321]  ? __mutex_lock_slowpath+0x10/0x10
[ 4093.900323]  ? __check_object_size+0x15a/0x350
[ 4093.900326]  kernfs_fop_write+0x280/0x3f0
[ 4093.900329]  vfs_write+0x145/0x440
[ 4093.900330]  ksys_write+0xab/0x160
[ 4093.900332]  ? __ia32_sys_read+0xb0/0xb0
[ 4093.900334]  ? fput_many+0x1a/0x120
[ 4093.900335]  ? filp_close+0xf0/0x130
[ 4093.900338]  do_syscall_64+0xa0/0x370
[ 4093.900339]  ? page_fault+0x8/0x30
[ 4093.900341]  entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 4093.900357] RIP: 0033:0x7f16ad4d22c0
[ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24
[ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0
[ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001
[ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700
[ 4093.900364] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002
[ 4093.900365] R13: 0000000000000001 R14: 00007f16ad7a0620 R15: 0000000000000001
[ 4093.900367]
[ 4093.900368] Allocated by task 820:
[ 4093.900371]  kasan_kmalloc+0xa6/0xd0
[ 4093.900373]  __kmalloc+0xfb/0x200
[ 4093.900376]  iavf_init_interrupt_scheme+0x63b/0x1320 [iavf]
[ 4093.900380]  iavf_watchdog_task+0x3d51/0x52c0 [iavf]
[ 4093.900382]  process_one_work+0x56a/0x11f0
[ 4093.900383]  worker_thread+0x8f/0xf40
[ 4093.900384]  kthread+0x2a0/0x390
[ 4093.900385]  ret_from_fork+0x1f/0x40
[ 4093.900387]  0xffffffffffffffff
[ 4093.900387]
[ 4093.900388] Freed by task 6699:
[ 4093.900390]  __kasan_slab_free+0x137/0x190
[ 4093.900391]  kfree+0x8b/0x1b0
[ 4093.900394]  iavf_free_q_vectors+0x11d/0x1a0 [iavf]
[ 4093.900397]  iavf_remove+0x35a/0xd20 [iavf]
[ 4093.900399]  pci_device_remove+0xa8/0x1f0
[ 4093.900400]  device_release_driver_internal+0x1c6/0x460
[ 4093.900401]  pci_stop_bus_device+0x101/0x150
[ 4093.900402]  pci_stop_and_remove_bus_device+0xe/0x20
[ 4093.900403]  pci_iov_remove_virtfn+0x187/0x420
[ 4093.900404]  sriov_disable+0xed/0x3e0
[ 4093.900409]  i40e_free_vfs+0x754/0x1210 [i40e]
[ 4093.900415]  i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e]
[ 4093.900416]  sriov_numvfs_store+0x214/0x290
[ 4093.900417]  kernfs_fop_write+0x280/0x3f0
[ 4093.900418]  vfs_write+0x145/0x440
[ 4093.900419]  ksys_write+0xab/0x160
[ 4093.900420]  do_syscall_64+0xa0/0x370
[ 4093.900421]  entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 4093.900422]  0xffffffffffffffff
[ 4093.900422]
[ 4093.900424] The buggy address belongs to the object at ffff88b4dc144200
                which belongs to the cache kmalloc-8k of size 8192
[ 4093.900425] The buggy address is located 5184 bytes inside of
                8192-byte region [ffff88b4dc144200, ffff88b4dc146200)
[ 4093.900425] The buggy address belongs to the page:
[ 4093.900427] page:ffffea00d3705000 refcount:1 mapcount:0 mapping:ffff88bf04415c80 index:0x0 compound_mapcount: 0
[ 4093.900430] flags: 0x10000000008100(slab|head)
[ 4093.900433] raw: 0010000000008100 dead000000000100 dead000000000200 ffff88bf04415c80
[ 4093.900434] raw: 0000000000000000 0000000000030003 00000001ffffffff 0000000000000000
[ 4093.900434] page dumped because: kasan: bad access detected
[ 4093.900435]
[ 4093.900435] Memory state around the buggy address:
[ 4093.900436]  ffff88b4dc145500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 4093.900437]  ffff88b4dc145580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 4093.900438] >ffff88b4dc145600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 4093.900438]                                            ^
[ 4093.900439]  ffff88b4dc145680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 4093.900440]  ffff88b4dc145700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 4093.900440] ==================================================================

Although the patch #2 (of 2) can avoid the issue triggered by this
repro.sh, there still are other potential risks that if num_active_queues
is changed to less than allocated q_vectors[] by unexpected, the
mismatched netif_napi_add/del() can also cause UAF.

Since we actually call netif_napi_add() for all allocated q_vectors
unconditionally in iavf_alloc_q_vectors(), so we should fix it by
letting netif_napi_del() match to netif_napi_add().

Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: Donglin Peng <pengdonglin@sangfor.com.cn>
Cc: Huang Cun <huangcun@sangfor.com.cn>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Merge patch series "can: gs_usb: fix time stamp counter initialization"

Marc Kleine-Budde <mkl@pengutronix.de> says:

During testing I noticed a crash if unloading/loading the gs_usb
driver during high CAN bus load.

The current version of the candlelight firmware doesn't flush the
queues of the received CAN frames during the reset command. This leads
to a crash if hardware timestamps are enabled, and an URB from the
device is received before the cycle counter/time counter
infrastructure has been setup.

First clean up then error handling in gs_can_open().

Then, fix the problem by converting the cycle counter/time counter
infrastructure from a per-channel to per-device and set it up before
submitting RX-URBs to the USB stack.

Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-0-9017cefcd9d5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: gs_usb: fix time stamp counter initialization

If the gs_usb device driver is unloaded (or unbound) before the
interface is shut down, the USB stack first calls the struct
usb_driver::disconnect and then the struct net_device_ops::ndo_stop
callback.

In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more
RX'ed CAN frames are send from the USB device to the host. Later in
gs_can_close() a reset control message is send to each CAN channel to
remove the controller from the CAN bus. In this race window the USB
device can still receive CAN frames from the bus and internally queue
them to be send to the host.

At least in the current version of the candlelight firmware, the queue
of received CAN frames is not emptied during the reset command. After
loading (or binding) the gs_usb driver, new URBs are submitted during
the struct net_device_ops::ndo_open callback and the candlelight
firmware starts sending its already queued CAN frames to the host.

However, this scenario was not considered when implementing the
hardware timestamp function. The cycle counter/time counter
infrastructure is set up (gs_usb_timestamp_init()) after the USBs are
submitted, resulting in a NULL pointer dereference if
timecounter_cyc2time() (via the call chain:
gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() ->
gs_usb_skb_set_timestamp()) is called too early.

Move the gs_usb_timestamp_init() function before the URBs are
submitted to fix this problem.

For a comprehensive solution, we need to consider gs_usb devices with
more than 1 channel. The cycle counter/time counter infrastructure is
setup per channel, but the RX URBs are per device. Once gs_can_open()
of _a_ channel has been called, and URBs have been submitted, the
gs_usb_receive_bulk_callback() can be called for _all_ available
channels, even for channels that are not running, yet. As cycle
counter/time counter has not set up, this will again lead to a NULL
pointer dereference.

Convert the cycle counter/time counter from a "per channel" to a "per
device" functionality. Also set it up, before submitting any URBs to
the device.

Further in gs_usb_receive_bulk_callback(), don't process any URBs for
not started CAN channels, only resubmit the URB.

Fixes: 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support")
Closes: https://github.com/candle-usb/candleLight_fw/issues/137#issuecomment-1623532076
Cc: stable@vger.kernel.org
Cc: John Whittington <git@jbrengineering.co.uk>
Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-2-9017cefcd9d5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: gs_usb: gs_can_open(): improve error handling

The gs_usb driver handles USB devices with more than 1 CAN channel.
The RX path for all channels share the same bulk endpoint (the
transmitted bulk data encodes the channel number). These per-device
resources are allocated and submitted by the first opened channel.

During this allocation, the resources are either released immediately
in case of a failure or the URBs are anchored. All anchored URBs are
finally killed with gs_usb_disconnect().

Currently, gs_can_open() returns with an error if the allocation of a
URB or a buffer fails. However, if usb_submit_urb() fails, the driver
continues with the URBs submitted so far, even if no URBs were
successfully submitted.

Treat every error as fatal and free all allocated resources
immediately.

Switch to goto-style error handling, to prepare the driver for more
per-device resource allocation.

Cc: stable@vger.kernel.org
Cc: John Whittington <git@jbrengineering.co.uk>
Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-1-9017cefcd9d5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: bcm: Fix UAF in bcm_proc_show()

BUG: KASAN: slab-use-after-free in bcm_proc_show+0x969/0xa80
Read of size 8 at addr ffff888155846230 by task cat/7862

CPU: 1 PID: 7862 Comm: cat Not tainted 6.5.0-rc1-00153-gc8746099c197 #230
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xd5/0x150
print_report+0xc1/0x5e0
kasan_report+0xba/0xf0
bcm_proc_show+0x969/0xa80
seq_read_iter+0x4f6/0x1260
seq_read+0x165/0x210
proc_reg_read+0x227/0x300
vfs_read+0x1d5/0x8d0
ksys_read+0x11e/0x240
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Allocated by task 7846:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x9e/0xa0
bcm_sendmsg+0x264b/0x44e0
sock_sendmsg+0xda/0x180
____sys_sendmsg+0x735/0x920
___sys_sendmsg+0x11d/0x1b0
__sys_sendmsg+0xfa/0x1d0
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Freed by task 7846:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x27/0x40
____kasan_slab_free+0x161/0x1c0
slab_free_freelist_hook+0x119/0x220
__kmem_cache_free+0xb4/0x2e0
rcu_core+0x809/0x1bd0

bcm_op is freed before procfs entry be removed in bcm_release(),
this lead to bcm_proc_show() may read the freed bcm_op.

Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230715092543.15548-1-yuehaibing@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: raw: fix receiver memory leak

Got kmemleak errors with the following ltp can_filter testcase:

for ((i=1; i<=100; i++))
do
        ./can_filter &
        sleep 0.1
done

==============================================================
[<00000000db4a4943>] can_rx_register+0x147/0x360 [can]
[<00000000a289549d>] raw_setsockopt+0x5ef/0x853 [can_raw]
[<000000006d3d9ebd>] __sys_setsockopt+0x173/0x2c0
[<00000000407dbfec>] __x64_sys_setsockopt+0x61/0x70
[<00000000fd468496>] do_syscall_64+0x33/0x40
[<00000000b7e47d51>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

It's a bug in the concurrent scenario of unregister_netdevice_many()
and raw_release() as following:

             cpu0                                        cpu1
unregister_netdevice_many(can_dev)
  unlist_netdevice(can_dev) // dev_get_by_index() return NULL after this
  net_set_todo(can_dev)
raw_release(can_socket)
  dev = dev_get_by_index(, ro->ifindex); // dev == NULL
  if (dev) { // receivers in dev_rcv_lists not free because dev is NULL
    raw_disable_allfilters(, dev, );
    dev_put(dev);
  }
  ...
  ro->bound = 0;
  ...

call_netdevice_notifiers(NETDEV_UNREGISTER, )
  raw_notify(, NETDEV_UNREGISTER, )
    if (ro->bound) // invalid because ro->bound has been set 0
      raw_disable_allfilters(, dev, ); // receivers in dev_rcv_lists will never be freed

Add a net_device pointer member in struct raw_sock to record bound
can_dev, and use rtnl_lock to serialize raw_socket members between
raw_bind(), raw_release(), raw_setsockopt() and raw_notify(). Use
ro->dev to decide whether to free receivers in dev_rcv_lists.

Fixes: 8d0caedb7596 ("can: bcm/raw/isotp: use per module netdevice notifier")
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/20230711011737.1969582-1-william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

r8169: fix ASPM-related problem for chip version 42 and 43

Referenced commit missed that for chip versions 42 and 43 ASPM
remained disabled in the respective rtl_hw_start_...() routines.
This resulted in problems as described in the referenced bug
ticket. Therefore re-instantiate the previous logic.

Fixes: 5fc3f6c90cca ("r8169: consolidate disabling ASPM before EPHY access")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217635
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: correct KSZ8795 static MAC table access

The KSZ8795 driver code was modified to use on KSZ8863/73, which has
different register definitions.  Some of the new KSZ8795 register
information are wrong compared to previous code.

KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID
and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading
than writing.  To compensate that a special code was added to shift the
register value by 1 before applying those bits.  This is wrong when the
code is running on KSZ8863, so this special code is only executed when
KSZ8795 is detected.

Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sched-fixes'

Victor Nogueira says:

====================
net: sched: Fixes for classifiers

Four different classifiers (bpf, u32, matchall, and flower) are
calling tcf_bind_filter in their callbacks, but arent't undoing it by
calling tcf_unbind_filter if their was an error after binding.

This patch set fixes all this by calling tcf_unbind_filter in such
cases.

This set also undoes a refcount decrement in cls_u32 when an update
fails under specific conditions which are described in patch #3.

v1 -> v2:
* Remove blank line after fixes tag
* Fix reverse xmas tree issues pointed out by Simon

v2 -> v3:
* Inline functions cls_bpf_set_parms and fl_set_parms to avoid adding
  yet another parameter (and a return value at it) to them.
* Remove similar fixes for u32 and matchall, which will be sent soon,
  once we find a way to do the fixes without adding a return parameter
  to their set_parms functions.

v3 -> v4:
* Inline mall_set_parms to avoid adding yet another parameter.
* Remove set_flags parameter from u32_set_parms and create a separate
  function for calling tcf_bind_filter and tcf_unbind_filter in case of
  failure.
* Change cover letter title to also encompass refcnt fix for u32

v4 -> v5:
* Change back tag to net
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: cls_flower: Undo tcf_bind_filter in case of an error

If TCA_FLOWER_CLASSID is specified in the netlink message, the code will
call tcf_bind_filter. However, if any error occurs after that, the code
should undo this by calling tcf_unbind_filter.

Fixes: 77b9900ef53a ("tc: introduce Flower classifier")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: cls_bpf: Undo tcf_bind_filter in case of an error

If cls_bpf_offload errors out, we must also undo tcf_bind_filter that
was done before the error.

Fix that by calling tcf_unbind_filter in errout_parms.

Fixes: eadb41489fd2 ("net: cls_bpf: add support for marking filters as hardware-only")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: cls_u32: Undo refcount decrement in case update failed

In the case of an update, when TCA_U32_LINK is set, u32_set_parms will
decrement the refcount of the ht_down (struct tc_u_hnode) pointer
present in the older u32 filter which we are replacing. However, if
u32_replace_hw_knode errors out, the update command fails and that
ht_down pointer continues decremented. To fix that, when
u32_replace_hw_knode fails, check if ht_down's refcount was decremented
and undo the decrement.

Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: cls_u32: Undo tcf_bind_filter if u32_replace_hw_knode

When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms.

Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: cls_matchall: Undo tcf_bind_filter in case of failure after mall_set_parms

In case an error occurred after mall_set_parms executed successfully, we
must undo the tcf_bind_filter call it issues.

Fix that by calling tcf_unbind_filter in err_replace_hw_filter label.

Fixes: ec2507d2a306 ("net/sched: cls_matchall: Fix error path")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-fix-kernel-doc-problems-in-include-net'

Randy Dunlap says:

====================
net: fix kernel-doc problems in include/net/

Fix many (but not all) kernel-doc warnings in include/net/.

[PATCH v2 net 1/9] net: bonding: remove kernel-doc comment marker
[PATCH v2 net 2/9] net: cfg802154: fix kernel-doc notation warnings
[PATCH v2 net 3/9] codel: fix kernel-doc notation warnings
[PATCH v2 net 4/9] devlink: fix kernel-doc notation warnings
[PATCH v2 net 5/9] inet: frags: remove kernel-doc comment marker
[PATCH v2 net 6/9] net: llc: fix kernel-doc notation warnings
[PATCH v2 net 7/9] net: NSH: fix kernel-doc notation warning
[PATCH v2 net 8/9] pie: fix kernel-doc notation warning
[PATCH v2 net 9/9] rsi: remove kernel-doc comment marker
====================

Link: https://lore.kernel.org/r/20230714045127.18752-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

rsi: remove kernel-doc comment marker

Change an errant kernel-doc comment marker (/**) to a regular
comment to prevent a kernel-doc warning.

rsi_91x.h:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Copyright (c) 2017 Redpine Signals Inc.

Fixes: 4c10d56a76bb ("rsi: add header file rsi_91x")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230714045127.18752-10-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pie: fix kernel-doc notation warning

Spell a struct member's name correctly to prevent a kernel-doc
warning.

pie.h:38: warning: Function parameter or member 'tupdate' not described in 'pie_params'

Fixes: b42a3d7c7cff ("pie: improve comments and commenting style")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Leslie Monis <lesliemonis@gmail.com>
Cc: "Mohit P. Tahiliani" <tahiliani@nitk.edu.in>
Cc: Gautam Ramakrishnan <gautamramk@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/r/20230714045127.18752-9-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: NSH: fix kernel-doc notation warning

Use the struct member's name and the correct format to prevent a
kernel-doc warning.

nsh.h:200: warning: Function parameter or member 'context' not described in 'nsh_md1_ctx'

Fixes: 1f0b7744c505 ("net: add NSH header structures and helpers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Benc <jbenc@redhat.com>
Link: https://lore.kernel.org/r/20230714045127.18752-8-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: llc: fix kernel-doc notation warnings

Use the corrent function parameter name or format to prevent
kernel-doc warnings.
Add 2 function parameter descriptions to prevent kernel-doc warnings.

llc_pdu.h:278: warning: Function parameter or member 'da' not described in 'llc_pdu_decode_da'
llc_pdu.h:278: warning: Excess function parameter 'sa' description in 'llc_pdu_decode_da'
llc_pdu.h:330: warning: Function parameter or member 'skb' not described in 'llc_pdu_init_as_test_cmd'
llc_pdu.h:379: warning: Function parameter or member 'svcs_supported' not described in 'llc_pdu_init_as_xid_cmd'
llc_pdu.h:379: warning: Function parameter or member 'rx_window' not described in 'llc_pdu_init_as_xid_cmd'

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230714045127.18752-7-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

inet: frags: eliminate kernel-doc warning

Modify the anonymous enum kernel-doc content so that it doesn't cause
a kernel-doc warning.

inet_frag.h:33: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Fixes: 1ab1934ed80a ("inet: frags: enum the flag definitions and add descriptions")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230714045127.18752-6-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: fix kernel-doc notation warnings

Spell function or struct member names correctly.
Use ':' instead of '-' for struct member entries.
Mark one field as private in kernel-doc.
Add a few entries that were missing.
Fix a typo.

These changes prevent kernel-doc warnings:

devlink.h:252: warning: Function parameter or member 'field_id' not described in 'devlink_dpipe_match'
devlink.h:267: warning: Function parameter or member 'field_id' not described in 'devlink_dpipe_action'
devlink.h:310: warning: Function parameter or member 'match_values_count' not described in 'devlink_dpipe_entry'
devlink.h:355: warning: Function parameter or member 'list' not described in 'devlink_dpipe_table'
devlink.h:374: warning: Function parameter or member 'actions_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'matches_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'entries_dump' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'counters_set_update' not described in 'devlink_dpipe_table_ops'
devlink.h:374: warning: Function parameter or member 'size_get' not described in 'devlink_dpipe_table_ops'
devlink.h:384: warning: Function parameter or member 'headers' not described in 'devlink_dpipe_headers'
devlink.h:384: warning: Function parameter or member 'headers_count' not described in 'devlink_dpipe_headers'
devlink.h:398: warning: Function parameter or member 'unit' not described in 'devlink_resource_size_params'
devlink.h:487: warning: Function parameter or member 'id' not described in 'devlink_param'
devlink.h:645: warning: Function parameter or member 'overwrite_mask' not described in 'devlink_flash_update_params'

Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)")
Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction")
Fixes: eabaef1896bc ("devlink: Add devlink_param register and unregister")
Fixes: 5d5b4128c4ca ("devlink: introduce flash update overwrite mask")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Moshe Shemesh <moshe@mellanox.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230714045127.18752-5-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

codel: fix kernel-doc notation warnings

Use '@' before the struct member names in kernel-doc notation
to prevent kernel-doc warnings.

codel.h:158: warning: Function parameter or member 'ecn_mark' not described in 'codel_stats'
codel.h:158: warning: Function parameter or member 'ce_mark' not described in 'codel_stats'

Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Dave Taht <dave.taht@bufferbloat.net>
Link: https://lore.kernel.org/r/20230714045127.18752-4-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: cfg802154: fix kernel-doc notation warnings

Add an enum heading to the kernel-doc comments to prevent
kernel-doc warnings.

cfg802154.h:174: warning: Cannot understand * @WPAN_PHY_FLAG_TRANSMIT_POWER: Indicates that transceiver will support
on line 174 - I thought it was a doc line

cfg802154.h:192: warning: Enum value 'WPAN_PHY_FLAG_TXPOWER' not described in enum 'wpan_phy_flags'
cfg802154.h:192: warning: Excess enum value 'WPAN_PHY_FLAG_TRANSMIT_POWER' description in 'wpan_phy_flags'

Fixes: edea8f7c75ec ("cfg802154: introduce wpan phy flags")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230714045127.18752-3-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: bonding: remove kernel-doc comment marker

Change an errant kernel-doc comment marker (/**) to a regular
comment to prevent a kernel-doc warning.

bonding.h:282: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Returns NULL if the net_device does not belong to any of the bond's slaves

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Link: https://lore.kernel.org/r/20230714045127.18752-2-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ice: prevent NULL pointer deref during reload

Calling ethtool during reload can lead to call trace, because VSI isn't
configured for some time, but netdev is alive.

To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors
to 0 after freeing and add a check for ::tx/rx_rings in ring related
ethtool ops.

Add proper unroll of filters in ice_start_eth().

Reproduction:
$watch -n 0.1 -d 'ethtool -g enp24s0f0np0'
$devlink dev reload pci/0000:18:00.0 action driver_reinit

Call trace before fix:
[66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000
[66303.926259] #PF: supervisor read access in kernel mode
[66303.926286] #PF: error_code(0x0000) - not-present page
[66303.926311] PGD 0 P4D 0
[66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI
[66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G           OE      6.4.0-rc5+ #1
[66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018
[66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice]
[66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48
[66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246
[66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48
[66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000
[66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000
[66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000
[66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50
[66303.926906] FS:  00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000
[66303.926941] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0
[66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[66303.927060] PKRU: 55555554
[66303.927075] Call Trace:
[66303.927094]  <TASK>
[66303.927111]  ? __die+0x23/0x70
[66303.927140]  ? page_fault_oops+0x171/0x4e0
[66303.927176]  ? exc_page_fault+0x7f/0x180
[66303.927209]  ? asm_exc_page_fault+0x26/0x30
[66303.927244]  ? ice_get_ringparam+0x22/0x50 [ice]
[66303.927433]  rings_prepare_data+0x62/0x80
[66303.927469]  ethnl_default_doit+0xe2/0x350
[66303.927501]  genl_family_rcv_msg_doit.isra.0+0xe3/0x140
[66303.927538]  genl_rcv_msg+0x1b1/0x2c0
[66303.927561]  ? __pfx_ethnl_default_doit+0x10/0x10
[66303.927590]  ? __pfx_genl_rcv_msg+0x10/0x10
[66303.927615]  netlink_rcv_skb+0x58/0x110
[66303.927644]  genl_rcv+0x28/0x40
[66303.927665]  netlink_unicast+0x19e/0x290
[66303.927691]  netlink_sendmsg+0x254/0x4d0
[66303.927717]  sock_sendmsg+0x93/0xa0
[66303.927743]  __sys_sendto+0x126/0x170
[66303.927780]  __x64_sys_sendto+0x24/0x30
[66303.928593]  do_syscall_64+0x5d/0x90
[66303.929370]  ? __count_memcg_events+0x60/0xa0
[66303.930146]  ? count_memcg_events.constprop.0+0x1a/0x30
[66303.930920]  ? handle_mm_fault+0x9e/0x350
[66303.931688]  ? do_user_addr_fault+0x258/0x740
[66303.932452]  ? exc_page_fault+0x7f/0x180
[66303.933193]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Fixes: 5b246e533d01 ("ice: split probe into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: Unregister netdev and devlink_port only once

Since commit 6624e780a577fc ("ice: split ice_vsi_setup into smaller
functions") ice_vsi_release does things twice. There is unregister
netdev which is unregistered in ice_deinit_eth also.

It also unregisters the devlink_port twice which is also unregistered
in ice_deinit_eth(). This double deregistration is hidden because
devl_port_unregister ignores the return value of xa_erase.

[   68.642167] Call Trace:
[   68.650385]  ice_devlink_destroy_pf_port+0xe/0x20 [ice]
[   68.655656]  ice_vsi_release+0x445/0x690 [ice]
[   68.660147]  ice_deinit+0x99/0x280 [ice]
[   68.664117]  ice_remove+0x1b6/0x5c0 [ice]

[  171.103841] Call Trace:
[  171.109607]  ice_devlink_destroy_pf_port+0xf/0x20 [ice]
[  171.114841]  ice_remove+0x158/0x270 [ice]
[  171.118854]  pci_device_remove+0x3b/0xc0
[  171.122779]  device_release_driver_internal+0xc7/0x170
[  171.127912]  driver_detach+0x54/0x8c
[  171.131491]  bus_remove_driver+0x77/0xd1
[  171.135406]  pci_unregister_driver+0x2d/0xb0
[  171.139670]  ice_module_exit+0xc/0x55f [ice]

Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

gso: fix dodgy bit handling for GSO_UDP_L4

Commit 1fd54773c267 ("udp: allow header check for dodgy GSO_UDP_L4
packets.") checks DODGY bit for UDP, but for packets that can be fed
directly to the device after gso_segs reset, it actually falls through
to fragmentation:

https://lore.kernel.org/all/CAJPywTKDdjtwkLVUW6LRA2FU912qcDmQOQGt2WaDo28KzYDg+A@mail.gmail.com/

This change restores the expected behavior of GSO_UDP_L4 packets.

Fixes: 1fd54773c267 ("udp: allow header check for dodgy GSO_UDP_L4 packets.")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: Remove repeating expression

Identify issues that arise by using the tests/doublebitand.cocci
semantic patch. Need to remove duplicate expression in if statement.

Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bna: Remove error checking for debugfs_create_dir()

It is expected that most callers should _ignore_ the errors return by
debugfs_create_dir() in bnad_debugfs_init().

Signed-off-by: Wang Ming <machel@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: handle probe deferral

Move the call to of_get_ethdev_address to mtk_add_mac which is part of
the probe function and can hence itself return -EPROBE_DEFER should
of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely
get rid of the mtk_init function.

The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced
in situations in which the NVMEM provider holding the MAC address has
not yet be loaded at the time mtk_eth_soc is initially probed. In this
case probing of mtk_eth_soc should be deferred instead of falling back
to use a random MAC address, so once the NVMEM provider becomes
available probing can be repeated.

Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: Add extack warning when enabling STP in netns.

When we create an L2 loop on a bridge in netns, we will see packets storm
even if STP is enabled.

  # unshare -n
  # ip link add br0 type bridge
  # ip link add veth0 type veth peer name veth1
  # ip link set veth0 master br0 up
  # ip link set veth1 master br0 up
  # ip link set br0 type bridge stp_state 1
  # ip link set br0 up
  # sleep 30
  # ip -s link show br0
  2: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
      link/ether b6:61:98:1c:1c:b5 brd ff:ff:ff:ff:ff:ff
      RX: bytes  packets  errors  dropped missed  mcast
      956553768  12861249 0       0       0       12861249  <-. Keep
      TX: bytes  packets  errors  dropped carrier collsns     |  increasing
      1027834    11951    0       0       0       0         <-'   rapidly

This is because llc_rcv() drops all packets in non-root netns and BPDU
is dropped.

Let's add extack warning when enabling STP in netns.

  # unshare -n
  # ip link add br0 type bridge
  # ip link set br0 type bridge stp_state 1
  Warning: bridge: STP does not work in non-root netns.

Note this commit will be reverted later when we namespacify the whole LLC
infra.

Fixes: e730c15519d0 ("[NET]: Make packet reception network namespace safe")
Suggested-by: Harry Coin <hcoin@quietfountain.com>
Link: https://lore.kernel.org/netdev/0f531295-e289-022d-5add-5ceffa0df9bc@quietfountain.com/
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()

CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
field will be strictly contained within one word. However, this is not
guaranteed to be the case and it is possible for ALE field entries to span
across up to two words at the most.

Fix the methods to handle getting/setting fields spanning up to two words.

Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support")
Signed-off-by: Tanmay Patil <t-patil@ti.com>
[s-vadapalli@ti.com: rephrased commit message and added Fixes tag]
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: ar9331: Use explict flags for regmap single read/write

The at9331 is only able to read or write a single register at once. The
driver has a custom regmap bus and chooses to tell the regmap core about
this by reporting the maximum transfer sizes rather than the explicit
flags that exist at the regmap level. Since there are a number of
problems with the raw transfer limits and the regmap level flags are
better integrated anyway convert the driver to use the flags.

No functional change.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urb

The syzbot fuzzer identified a problem in the usbnet driver:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc9000463f568 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001
RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003
R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0
Call Trace:
<TASK>
usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3578 [inline]
dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594
...

This bug is caused by the fact that usbnet trusts the bulk endpoint
addresses its probe routine receives in the driver_info structure, and
it does not check to see that these endpoints actually exist and have
the expected type and directions.

The fix is simply to add such a check.

Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dsa: mv88e6xxx: Do a final check before timing out

I get sporadic timeouts from the driver when using the
MV88E6352. Reading the status again after the loop fixes the
problem: the operation is successful but goes undetected.

Some added prints show things like this:

[   58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
    for switch, addr 1b reg 0b, mask 8000, val 0000, data c000
[   58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for
    ATU op 4000, fid 0001
(...)
[   61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
    for switch, addr 1c reg 18, mask 8000, val 0000, data 9860
[   61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting
    for PHY command 1860 to complete

The reason is probably not the commands: I think those are
mostly fine with the 50+50ms timeout, but the problem
appears when OpenWrt brings up several interfaces in
parallel on a system with 7 populated ports: if one of
them take more than 50 ms and waits one or more of the
others can get stuck on the mutex for the switch and then
this can easily multiply.

As we sleep and wait, the function loop needs a final
check after exiting the loop if we were successful.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Fixes: 35da1dfd9484 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'net-6.5-rc2' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, wireless and ebpf.

  Current release - regressions:

   - netfilter: conntrack: gre: don't set assured flag for clash entries

   - wifi: iwlwifi: remove 'use_tfh' config to fix crash

  Previous releases - regressions:

   - ipv6: fix a potential refcount underflow for idev

   - icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in
     icmp6_dev()

   - bpf: fix max stack depth check for async callbacks

   - eth: mlx5e:
      - check for NOT_READY flag state after locking
      - fix page_pool page fragment tracking for XDP

   - eth: igc:
      - fix tx hang issue when QBV gate is closed
      - fix corner cases for TSN offload

   - eth: octeontx2-af: Move validation of ptp pointer before its usage

   - eth: ena: fix shift-out-of-bounds in exponential backoff

  Previous releases - always broken:

   - core: prevent skb corruption on frag list segmentation

   - sched:
      - cls_fw: fix improper refcount update leads to use-after-free
      - sch_qfq: account for stab overhead in qfq_enqueue

   - netfilter:
      - report use refcount overflow
      - prevent OOB access in nft_byteorder_eval

   - wifi: mt7921e: fix init command fail with enabled device

   - eth: ocelot: fix oversize frame dropping for preemptible TCs

   - eth: fec: recycle pages for transmitted XDP frames"

* tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
  selftests: tc-testing: add test for qfq with stab overhead
  net/sched: sch_qfq: account for stab overhead in qfq_enqueue
  selftests: tc-testing: add tests for qfq mtu sanity check
  net/sched: sch_qfq: reintroduce lmax bound check for MTU
  wifi: cfg80211: fix receiving mesh packets without RFC1042 header
  wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()
  net: txgbe: fix eeprom calculation error
  net/sched: make psched_mtu() RTNL-less safe
  net: ena: fix shift-out-of-bounds in exponential backoff
  netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
  net/sched: flower: Ensure both minimum and maximum ports are specified
  MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
  docs: netdev: update the URL of the status page
  wifi: iwlwifi: remove 'use_tfh' config to fix crash
  xdp: use trusted arguments in XDP hints kfuncs
  bpf: cpumap: Fix memory leak in cpu_map_update_elem
  wifi: airo: avoid uninitialized warning in airo_get_rate()
  octeontx2-pf: Add additional check for MCAM rules
  net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
  net: fec: use netdev_err_once() instead of netdev_err()
  ...

Merge tag 'trace-v6.5-rc1-3' of git://git./linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fix some missing-prototype warnings

- Fix user events struct args (did not include size of struct)

   When creating a user event, the "struct" keyword is to denote that
   the size of the field will be passed in. But the parsing failed to
   handle this case.

- Add selftest to struct sizes for user events

- Fix sample code for direct trampolines.

   The sample code for direct trampolines attached to handle_mm_fault().
   But the prototype changed and the direct trampoline sample code was
   not updated. Direct trampolines needs to have the arguments correct
   otherwise it can fail or crash the system.

- Remove unused ftrace_regs_caller_ret() prototype.

- Quiet false positive of FORTIFY_SOURCE

   Due to backward compatibility, the structure used to save stack
   traces in the kernel had a fixed size of 8. This structure is
   exported to user space via the tracing format file. A change was made
   to allow more than 8 functions to be recorded, and user space now
   uses the size field to know how many functions are actually in the
   stack.

   But the structure still has size of 8 (even though it points into the
   ring buffer that has the required amount allocated to hold a full
   stack.

   This was fine until the fortifier noticed that the
   memcpy(&entry->caller, stack, size) was greater than the 8 functions
   and would complain at runtime about it.

   Hide this by using a pointer to the stack location on the ring buffer
   instead of using the address of the entry structure caller field.

- Fix a deadloop in reading trace_pipe that was caused by a mismatch
   between ring_buffer_empty() returning false which then asked to read
   the data, but the read code uses rb_num_of_entries() that returned
   zero, and causing a infinite "retry".

- Fix a warning caused by not using all pages allocated to store ftrace
   functions, where this can happen if the linker inserts a bunch of
   "NULL" entries, causing the accounting of how many pages needed to be
   off.

- Fix histogram synthetic event crashing when the start event is
   removed and the end event is still using a variable from it

- Fix memory leak in freeing iter->temp in tracing_release_pipe()

* tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix memory leak of iter->temp when reading trace_pipe
  tracing/histograms: Add histograms to hist_vars if they have referenced variables
  tracing: Stop FORTIFY_SOURCE complaining about stack trace caller
  ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
  ring-buffer: Fix deadloop issue on reading trace_pipe
  tracing: arm64: Avoid missing-prototype warnings
  selftests/user_events: Test struct size match cases
  tracing/user_events: Fix struct arg size match check
  x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret()
  arm64: ftrace: Add direct call trampoline samples support
  samples: ftrace: Save required argument registers in sample trampolines

Merge tag 'for-linus-6.5-rc2-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

- a cleanup of the Xen related ELF-notes

- a fix for virtio handling in Xen dom0 when running Xen in a VM

* tag 'for-linus-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/virtio: Fix NULL deref when a bridge of PCI root bus has no parent
x86/Xen: tidy xen-head.S

Merge tag 'sh-for-v6.5-tag2' of git://git./linux/kernel/git/glaubitz/sh-linux

Pull sh fixes from John Paul Adrian Glaubitz:
"The sh updates introduced multiple regressions.

  In particular, the change a8ac2961148e ("sh: Avoid using IRQ0 on SH3
  and SH4") causes several boards to hang during boot due to incorrect
  IRQ numbers.

  Geert Uytterhoeven has contributed patches that handle the virq offset
  in the IRQ code for the dreamcast, highlander and r2d boards while
  Artur Rojek has contributed a patch which handles the virq offset for
  the hd64461 companion chip"

* tag 'sh-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ
  sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux
  sh: mach-highlander: Handle virq offset in cascaded IRL demux
  sh: mach-r2d: Handle virq offset in cascaded IRL demux

tracing: Fix memory leak of iter->temp when reading trace_pipe

kmemleak reports:
  unreferenced object 0xffff88814d14e200 (size 256):
    comm "cat", pid 336, jiffies 4294871818 (age 779.490s)
    hex dump (first 32 bytes):
      04 00 01 03 00 00 00 00 08 00 00 00 00 00 00 00  ................
      0c d8 c8 9b ff ff ff ff 04 5a ca 9b ff ff ff ff  .........Z......
    backtrace:
      [<ffffffff9bdff18f>] __kmalloc+0x4f/0x140
      [<ffffffff9bc9238b>] trace_find_next_entry+0xbb/0x1d0
      [<ffffffff9bc9caef>] trace_print_lat_context+0xaf/0x4e0
      [<ffffffff9bc94490>] print_trace_line+0x3e0/0x950
      [<ffffffff9bc95499>] tracing_read_pipe+0x2d9/0x5a0
      [<ffffffff9bf03a43>] vfs_read+0x143/0x520
      [<ffffffff9bf04c2d>] ksys_read+0xbd/0x160
      [<ffffffff9d0f0edf>] do_syscall_64+0x3f/0x90
      [<ffffffff9d2000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8

when reading file 'trace_pipe', 'iter->temp' is allocated or relocated
in trace_find_next_entry() but not freed before 'trace_pipe' is closed.

To fix it, free 'iter->temp' in tracing_release_pipe().

Link: https://lore.kernel.org/linux-trace-kernel/20230713141435.1133021-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: ff895103a84ab ("tracing: Save off entry when peeking at next entry")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge branch 'net-sched-fixes-for-sch_qfq'

Pedro Tammela says:

====================
net/sched: fixes for sch_qfq

Patch 1 fixes a regression introduced in 6.4 where the MTU size could be
bigger than 'lmax'.

Patch 3 fixes an issue where the code doesn't account for qdisc_pkt_len()
returning a size bigger then 'lmax'.

Patches 2 and 4 are selftests for the issues above.
====================

Link: https://lore.kernel.org/r/20230711210103.597831-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: tc-testing: add test for qfq with stab overhead

A packet with stab overhead greater than QFQ_MAX_LMAX should be dropped
by the QFQ qdisc as it can't handle such lengths.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: sch_qfq: account for stab overhead in qfq_enqueue

Lion says:
-------
In the QFQ scheduler a similar issue to CVE-2023-31436
persists.

Consider the following code in net/sched/sch_qfq.c:

static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
                struct sk_buff **to_free)
{
     unsigned int len = qdisc_pkt_len(skb), gso_segs;

    // ...

     if (unlikely(cl->agg->lmax < len)) {
         pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
              cl->agg->lmax, len, cl->common.classid);
         err = qfq_change_agg(sch, cl, cl->agg->class_weight, len);
         if (err) {
             cl->qstats.drops++;
             return qdisc_drop(skb, sch, to_free);
         }

    // ...

     }

Similarly to CVE-2023-31436, "lmax" is increased without any bounds
checks according to the packet length "len". Usually this would not
impose a problem because packet sizes are naturally limited.

This is however not the actual packet length, rather the
"qdisc_pkt_len(skb)" which might apply size transformations according to
"struct qdisc_size_table" as created by "qdisc_get_stab()" in
net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc.

A user may choose virtually any size using such a table.

As a result the same issue as in CVE-2023-31436 can occur, allowing heap
out-of-bounds read / writes in the kmalloc-8192 cache.
-------

We can create the issue with the following commands:

tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \
overhead 999999999 linklayer ethernet qfq
tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k
tc filter add dev $DEV parent 1: matchall classid 1:1
ping -I $DEV 1.1.1.2

This is caused by incorrectly assuming that qdisc_pkt_len() returns a
length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX.

Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: Lion <nnamrec@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

selftests: tc-testing: add tests for qfq mtu sanity check

QFQ only supports a certain bound of MTU size so make sure
we check for this requirement in the tests.

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: sch_qfq: reintroduce lmax bound check for MTU

25369891fcef deletes a check for the case where no 'lmax' is
specified which 3037933448f6 previously fixed as 'lmax'
could be set to the device's MTU without any bound checking
for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check.

Fixes: 25369891fcef ("net/sched: sch_qfq: refactor parsing of netlink parameters")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ

A recent change to start counting SuperH IRQ #s from 16 breaks support
for the Hitachi HD64461 companion chip.

Move the offchip IRQ base and HD64461 IRQ # by 16 in order to
accommodate for the new virq numbering rules.

Fixes: a8ac2961148e ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230710233132.69734-1-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux

Take into account the virq offset when translating cascaded interrupts.

Fixes: a8ac2961148e8c72 ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/7d0cb246c9f1cd24bb1f637ec5cb67e799a4c3b8.1688908227.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: mach-highlander: Handle virq offset in cascaded IRL demux

Take into account the virq offset when translating cascaded IRL
interrupts.

Fixes: a8ac2961148e8c72 ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4fcb0d08a2b372431c41e04312742dc9e41e1be4.1688908186.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

sh: mach-r2d: Handle virq offset in cascaded IRL demux

When booting rts7751r2dplus_defconfig on QEMU, the system hangs due to
an interrupt storm on IRQ 20. IRQ 20 aka event 0x280 is a cascaded IRL
interrupt, which maps to IRQ_VOYAGER, the interrupt used by the Silicon
Motion SM501 multimedia companion chip. As rts7751r2d_irq_demux() does
not take into account the new virq offset, the interrupt is no longer
translated, leading to an unhandled interrupt.

Fix this by taking into account the virq offset when translating
cascaded IRL interrupts.

Fixes: a8ac2961148e8c72 ("sh: Avoid using IRQ0 on SH3 and SH4")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/fbfea3ad-d327-4ad5-ac9c-648c7ca3fe1f@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/2c99d5df41c40691f6c407b7b6a040d406bc81ac.1688901306.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>

Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2023-07-12

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 7 files changed, 93 insertions(+), 28 deletions(-).

The main changes are:

1) Fix max stack depth check for async callbacks, from Kumar.

2) Fix inconsistent JIT image generation, from Björn.

3) Use trusted arguments in XDP hints kfuncs, from Larysa.

4) Fix memory leak in cpu_map_update_elem, from Pu.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  xdp: use trusted arguments in XDP hints kfuncs
  bpf: cpumap: Fix memory leak in cpu_map_update_elem
  riscv, bpf: Fix inconsistent JIT image generation
  selftests/bpf: Add selftest for check_stack_max_depth bug
  bpf: Fix max stack depth check for async callbacks
====================

Link: https://lore.kernel.org/r/20230712223045.40182-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wifi: cfg80211: fix receiving mesh packets without RFC1042 header

Fix ethernet header length field after stripping the mesh header

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CT5GNZSK28AI.2K6M69OXM9RW5@syracuse/
Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
Reported-and-tested-by: Nicolas Escande <nico.escande@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230711115052.68430-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()

If there is a failure during rtw89_fw_h2c_raw() rtw89_debug_priv_send_h2c
should return negative error code instead of a positive value count.
Fix this bug by returning correct error code.

Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/tencent_AD09A61BC4DA92AD1EB0790F5C850E544D07@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: txgbe: fix eeprom calculation error

For some device types like TXGBE_ID_XAUI, *checksum computed in
txgbe_calc_eeprom_checksum() is larger than TXGBE_EEPROM_SUM. Remove the
limit on the size of *checksum.

Fixes: 049fe5365324 ("net: txgbe: Add operations to interact with firmware")
Fixes: 5e2ea7801fac ("net: txgbe: Fix unsigned comparison to zero in txgbe_calc_eeprom_checksum()")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20230711063414.3311-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-linus' of https://github.com/openrisc/linux

Pull OpenRISC fix from Stafford Horne:

- During the 6.4 cycle my fpu support work broke ABI compatibility in
   the sigcontext struct. This was noticed by musl libc developers after
   the release. This fix restores the ABI.

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Union fpcsr and oldmask in sigcontext to unbreak userspace ABI

tracing/histograms: Add histograms to hist_vars if they have referenced variables

Hist triggers can have referenced variables without having direct
variables fields. This can be the case if referenced variables are added
for trigger actions. In this case the newly added references will not
have field variables. Not taking such referenced variables into
consideration can result in a bug where it would be possible to remove
hist trigger with variables being refenced. This will result in a bug
that is easily reproducable like so

$ cd /sys/kernel/tracing
$ echo 'synthetic_sys_enter char[] comm; long id' >> synthetic_events
$ echo 'hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger
$ echo 'hist:keys=common_pid.execname,id.syscall:onmatch(raw_syscalls.sys_enter).synthetic_sys_enter($comm, id)' >> events/raw_syscalls/sys_enter/trigger
$ echo '!hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger

[  100.263533] ==================================================================
[  100.264634] BUG: KASAN: slab-use-after-free in resolve_var_refs+0xc7/0x180
[  100.265520] Read of size 8 at addr ffff88810375d0f0 by task bash/439
[  100.266320]
[  100.266533] CPU: 2 PID: 439 Comm: bash Not tainted 6.5.0-rc1 #4
[  100.267277] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[  100.268561] Call Trace:
[  100.268902]  <TASK>
[  100.269189]  dump_stack_lvl+0x4c/0x70
[  100.269680]  print_report+0xc5/0x600
[  100.270165]  ? resolve_var_refs+0xc7/0x180
[  100.270697]  ? kasan_complete_mode_report_info+0x80/0x1f0
[  100.271389]  ? resolve_var_refs+0xc7/0x180
[  100.271913]  kasan_report+0xbd/0x100
[  100.272380]  ? resolve_var_refs+0xc7/0x180
[  100.272920]  __asan_load8+0x71/0xa0
[  100.273377]  resolve_var_refs+0xc7/0x180
[  100.273888]  event_hist_trigger+0x749/0x860
[  100.274505]  ? kasan_save_stack+0x2a/0x50
[  100.275024]  ? kasan_set_track+0x29/0x40
[  100.275536]  ? __pfx_event_hist_trigger+0x10/0x10
[  100.276138]  ? ksys_write+0xd1/0x170
[  100.276607]  ? do_syscall_64+0x3c/0x90
[  100.277099]  ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  100.277771]  ? destroy_hist_data+0x446/0x470
[  100.278324]  ? event_hist_trigger_parse+0xa6c/0x3860
[  100.278962]  ? __pfx_event_hist_trigger_parse+0x10/0x10
[  100.279627]  ? __kasan_check_write+0x18/0x20
[  100.280177]  ? mutex_unlock+0x85/0xd0
[  100.280660]  ? __pfx_mutex_unlock+0x10/0x10
[  100.281200]  ? kfree+0x7b/0x120
[  100.281619]  ? ____kasan_slab_free+0x15d/0x1d0
[  100.282197]  ? event_trigger_write+0xac/0x100
[  100.282764]  ? __kasan_slab_free+0x16/0x20
[  100.283293]  ? __kmem_cache_free+0x153/0x2f0
[  100.283844]  ? sched_mm_cid_remote_clear+0xb1/0x250
[  100.284550]  ? __pfx_sched_mm_cid_remote_clear+0x10/0x10
[  100.285221]  ? event_trigger_write+0xbc/0x100
[  100.285781]  ? __kasan_check_read+0x15/0x20
[  100.286321]  ? __bitmap_weight+0x66/0xa0
[  100.286833]  ? _find_next_bit+0x46/0xe0
[  100.287334]  ? task_mm_cid_work+0x37f/0x450
[  100.287872]  event_triggers_call+0x84/0x150
[  100.288408]  trace_event_buffer_commit+0x339/0x430
[  100.289073]  ? ring_buffer_event_data+0x3f/0x60
[  100.292189]  trace_event_raw_event_sys_enter+0x8b/0xe0
[  100.295434]  syscall_trace_enter.constprop.0+0x18f/0x1b0
[  100.298653]  syscall_enter_from_user_mode+0x32/0x40
[  100.301808]  do_syscall_64+0x1a/0x90
[  100.304748]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  100.307775] RIP: 0033:0x7f686c75c1cb
[  100.310617] Code: 73 01 c3 48 8b 0d 65 3c 10 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 21 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 3c 10 00 f7 d8 64 89 01 48
[  100.317847] RSP: 002b:00007ffc60137a38 EFLAGS: 00000246 ORIG_RAX: 0000000000000021
[  100.321200] RAX: ffffffffffffffda RBX: 000055f566469ea0 RCX: 00007f686c75c1cb
[  100.324631] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 000000000000000a
[  100.328104] RBP: 00007ffc60137ac0 R08: 00007f686c818460 R09: 000000000000000a
[  100.331509] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009
[  100.334992] R13: 0000000000000007 R14: 000000000000000a R15: 0000000000000007
[  100.338381]  </TASK>

We hit the bug because when second hist trigger has was created
has_hist_vars() returned false because hist trigger did not have
variables. As a result of that save_hist_vars() was not called to add
the trigger to trace_array->hist_vars. Later on when we attempted to
remove the first histogram find_any_var_ref() failed to detect it is
being used because it did not find the second trigger in hist_vars list.

With this change we wait until trigger actions are created so we can take
into consideration if hist trigger has variable references. Also, now we
check the return value of save_hist_vars() and fail trigger creation if
save_hist_vars() fails.

Link: https://lore.kernel.org/linux-trace-kernel/20230712223021.636335-1-mkhalfella@purestorage.com
Cc: stable@vger.kernel.org
Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

net/sched: make psched_mtu() RTNL-less safe

Eric Dumazet says[1]:
-------
Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it
without holding RTNL, so dev->mtu can be changed underneath.
KCSAN could issue a warning.
-------

Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning.

[1] https://lore.kernel.org/all/CANn89iJoJO5VtaJ-2=_d2aOQhb0Xw8iBT_Cxqp2HyuS-zj6azw@mail.gmail.com/

v1 -> v2: Fix commit message

Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ena: fix shift-out-of-bounds in exponential backoff

The ENA adapters on our instances occasionally reset.  Once recently
logged a UBSAN failure to console in the process:

  UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13
  shift exponent 32 is too large for 32-bit type 'unsigned int'
  CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117
  Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017
  Workqueue: ena ena_fw_reset_device [ena]
  Call Trace:
  <TASK>
  dump_stack_lvl+0x4a/0x63
  dump_stack+0x10/0x16
  ubsan_epilogue+0x9/0x36
  __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
  ? __const_udelay+0x43/0x50
  ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena]
  wait_for_reset_state+0x54/0xa0 [ena]
  ena_com_dev_reset+0xc8/0x110 [ena]
  ena_down+0x3fe/0x480 [ena]
  ena_destroy_device+0xeb/0xf0 [ena]
  ena_fw_reset_device+0x30/0x50 [ena]
  process_one_work+0x22b/0x3d0
  worker_thread+0x4d/0x3f0
  ? process_one_work+0x3d0/0x3d0
  kthread+0x12a/0x150
  ? set_kthread_struct+0x50/0x50
  ret_from_fork+0x22/0x30
  </TASK>

Apparently, the reset delays are getting so large they can trigger a
UBSAN panic.

Looking at the code, the current timeout is capped at 5000us.  Using a
base value of 100us, the current code will overflow after (1<<29).  Even
at values before 32, this function wraps around, perhaps
unintentionally.

Cap the value of the exponent used for this backoff at (1<<16) which is
larger than currently necessary, but large enough to support bigger
values in the future.

Cc: stable@vger.kernel.org
Fixes: 4bb7f4cf60e3 ("net: ena: reduce driver load time")
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20230711013621.GE1926@templeofstupid.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tracing: Stop FORTIFY_SOURCE complaining about stack trace caller

The stack_trace event is an event created by the tracing subsystem to
store stack traces. It originally just contained a hard coded array of 8
words to hold the stack, and a "size" to know how many entries are there.
This is exported to user space as:

name: kernel_stack
ID: 4
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;

field:int size; offset:8; size:4; signed:1;
field:unsigned long caller[8]; offset:16; size:64; signed:0;

print fmt: "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n\t=> %ps\n" "\t=> %ps\n\t=> %ps\n",i
(void *)REC->caller[0], (void *)REC->caller[1], (void *)REC->caller[2],
(void *)REC->caller[3], (void *)REC->caller[4], (void *)REC->caller[5],
(void *)REC->caller[6], (void *)REC->caller[7]

Where the user space tracers could parse the stack. The library was
updated for this specific event to only look at the size, and not the
array. But some older users still look at the array (note, the older code
still checks to make sure the array fits inside the event that it read.
That is, if only 4 words were saved, the parser would not read the fifth
word because it will see that it was outside of the event size).

This event was changed a while ago to be more dynamic, and would save a
full stack even if it was greater than 8 words. It does this by simply
allocating more ring buffer to hold the extra words. Then it copies in the
stack via:

memcpy(&entry->caller, fstack->calls, size);

As the entry is struct stack_entry, that is created by a macro to both
create the structure and export this to user space, it still had the caller
field of entry defined as: unsigned long caller[8].

When the stack is greater than 8, the FORTIFY_SOURCE code notices that the
amount being copied is greater than the source array and complains about
it. It has no idea that the source is pointing to the ring buffer with the
required allocation.

To hide this from the FORTIFY_SOURCE logic, pointer arithmetic is used:

ptr = ring_buffer_event_data(event);
entry = ptr;
ptr += offsetof(typeof(*entry), caller);
memcpy(ptr, fstack->calls, size);

Link: https://lore.kernel.org/all/20230612160748.4082850-1-svens@linux.ibm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230712105235.5fc441aa@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()

As comments in ftrace_process_locs(), there may be NULL pointers in
mcount_loc section:
> Some architecture linkers will pad between
> the different mcount_loc sections of different
> object files to satisfy alignments.
> Skip any NULL pointers.

After commit 20e5227e9f55 ("ftrace: allow NULL pointers in mcount_loc"),
NULL pointers will be accounted when allocating ftrace pages but skipped
before adding into ftrace pages, this may result in some pages not being
used. Then after commit 706c81f87f84 ("ftrace: Remove extra helper
functions"), warning may occur at:
WARN_ON(pg->next);

To fix it, only warn for case that no pointers skipped but pages not used
up, then free those unused pages after releasing ftrace_lock.

Link: https://lore.kernel.org/linux-trace-kernel/20230712060452.3175675-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 706c81f87f84 ("ftrace: Remove extra helper functions")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()

The simple_write_to_buffer() function is designed to handle partial
writes.  It returns negatives on error, otherwise it returns the number
of bytes that were able to be copied.  This code doesn't check the
return properly.  We only know that the first byte is written, the rest
of the buffer might be uninitialized.

There is no need to use the simple_write_to_buffer() function.
Partial writes are prohibited by the "if (*ppos != 0)" check at the
start of the function.  Just use memdup_user() and copy the whole
buffer.

Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'platform-drivers-x86-v6.5-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
"Misc small fixes and hw-id additions"

* tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet
  platform/x86: dell-ddv: Fix mangled list in documentation
  platform/x86: dell-ddv: Improve error handling
  platform/x86/amd: pmf: Add new ACPI ID AMDI0103
  platform/x86/amd: pmc: Add new ACPI ID AMDI000A
  platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx
  platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc
  platform/x86: int3472/discrete: set variable skl_int3472_regulator_second_sensor storage-class-specifier to static
  platform/x86/intel/tpmi: Prevent overflow for cap_offset
  platform/x86: wmi: Replace open coded guid_parse_and_compare()
  platform/x86: wmi: Break possible infinite loop when parsing GUID