blk-throttle: remove incorrect comment for tg_last_low_overflow_time

Function tg_last_low_overflow_time is called with intermediate node as
following:
throtl_hierarchy_can_downgrade
  throtl_tg_can_downgrade
    tg_last_low_overflow_time

throtl_hierarchy_can_upgrade
  throtl_tg_can_upgrade
    tg_last_low_overflow_time

throtl_hierarchy_can_downgrade/throtl_hierarchy_can_upgrade will traverse
from leaf node to sub-root node and pass traversed intermediate node
to tg_last_low_overflow_time.

No such limit could be found from context and implementation of
tg_last_low_overflow_time, so remove this limit in comment.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-8-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-throttle: fix typo in comment of throtl_adjusted_limit

lapsed time -> elapsed time

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-7-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-throttle: simpfy low limit reached check in throtl_tg_can_upgrade

Commit c79892c557616 ("blk-throttle: add upgrade logic for LIMIT_LOW
state") added upgrade logic for low limit and methioned that
1. "To determine if a cgroup exceeds its limitation, we check if the cgroup
has pending request. Since cgroup is throttled according to the limit,
pending request means the cgroup reaches the limit."
2. "If a cgroup has limit set for both read and write, we consider the
combination of them for upgrade. The reason is read IO and write IO can
interfere with each other. If we do the upgrade based in one direction IO,
the other direction IO could be severly harmed."
Besides, we also determine that cgroup reaches low limit if low limit is 0,
see comment in throtl_tg_can_upgrade.

Collect the information above, the desgin of upgrade check is as following:
1.The low limit is reached if limit is zero or io is already queued.
2.Cgroup will pass upgrade check if low limits of READ and WRITE are both
reached.

Simpfy the check code described above to removce repeat check and improve
readability. There is no functional change.

Detail equivalence proof is as following:
All replaced conditions to return true are as following:
condition 1
  (!read_limit && !write_limit)
condition 2
  read_limit && sq->nr_queued[READ] &&
  (!write_limit || sq->nr_queued[WRITE])
condition 3
  write_limit && sq->nr_queued[WRITE] &&
  (!read_limit || sq->nr_queued[READ])

Transferring condition 2 as following:
  (read_limit && sq->nr_queued[READ]) &&
  (!write_limit || sq->nr_queued[WRITE])
is equivalent to
  (read_limit && sq->nr_queued[READ]) &&
  (!write_limit || (write_limit && sq->nr_queued[WRITE]))
is equivalent to
condition 2.1
  (read_limit && sq->nr_queued[READ] &&
  !write_limit) ||
condition 2.2
  (read_limit && sq->nr_queued[READ] &&
  (write_limit && sq->nr_queued[WRITE]))

Transferring condition 3 as following:
  write_limit && sq->nr_queued[WRITE] &&
  (!read_limit || sq->nr_queued[READ])
is equivalent to
  (write_limit && sq->nr_queued[WRITE]) &&
  (!read_limit || (read_limit && sq->nr_queued[READ]))
is equivalent to
condition 3.1
  ((write_limit && sq->nr_queued[WRITE]) &&
  !read_limit) ||
condition 3.2
  ((write_limit && sq->nr_queued[WRITE]) &&
  (read_limit && sq->nr_queued[READ]))

Condition 3.2 is the same as condition 2.2, so all conditions we get to
return are as following:
  (!read_limit && !write_limit) (1)
  (!read_limit && (write_limit && sq->nr_queued[WRITE])) (3.1)
  ((read_limit && sq->nr_queued[READ]) && !write_limit) (2.1)
  ((write_limit && sq->nr_queued[WRITE]) &&
  (read_limit && sq->nr_queued[READ])) (2.2)

As we can extract conditions "(a1 || a2) && (b1 || b2)" to:
a1 && b1
a1 && b2
a2 && b1
ab && b2

Considering that:
a1 = !read_limit
a2 = read_limit && sq->nr_queued[READ]
b1 = !write_limit
b2 = write_limit && sq->nr_queued[WRITE]

We can pack replaced conditions to
  (!read_limit || (read_limit && sq->nr_queued[READ])) &&
  (!write_limit || (write_limit && sq->nr_queued[WRITE]))
which is equivalent to
  (!read_limit || sq->nr_queued[READ]) &&
  (!write_limit || sq->nr_queued[WRITE])

Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-6-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-throttle: correct calculation of wait time in tg_may_dispatch

In C language, When executing "if (expression1 && expression2)" and
expression1 return false, the expression2 may not be executed.
For "tg_within_bps_limit(tg, bio, bps_limit, &bps_wait) &&
tg_within_iops_limit(tg, bio, iops_limit, &iops_wait))", if bps is
limited, tg_within_bps_limit will return false and
tg_within_iops_limit will not be called. So even bps and iops are
both limited, iops_wait will not be calculated and is always zero.
So wait time of iops is always ignored.

Fix this by always calling tg_within_bps_limit and tg_within_iops_limit
to get wait time for both bps and iops.

Observed that:
1. Wait time in tg_within_iops_limit/tg_within_bps_limit need always
be stored as wait argument is always passed.
2. wait time is stored to zero if iops/bps is limited otherwise non-zero
is stored.
Simpfy tg_within_iops_limit/tg_within_bps_limit by removing wait argument
and return wait time directly. Caller tg_may_dispatch checks if wait time
is zero to find if iops/bps is limited.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-5-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-throttle: ignore cgroup without io queued in blk_throtl_cancel_bios

Ignore cgroup without io queued in blk_throtl_cancel_bios for two
reasons:
1. Save cpu cycle for trying to dispatch cgroup which is no io queued.
2. Avoid non-consistent state that cgroup is inserted to service queue
without THROTL_TG_PENDING set as tg_update_disptime will unconditional
re-insert cgroup to service queue. If we are on the default hierarchy,
IO dispatched from child in tg_dispatch_one_bio will trigger inserting
cgroup to service queue without erase first and ruin the tree.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-4-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-throttle: Fix that bps of child could exceed bps limited in parent

Consider situation as following (on the default hierarchy):
 HDD
  |
root (bps limit: 4k)
  |
child (bps limit :8k)
  |
fio bs=8k
Rate of fio is supposed to be 4k, but result is 8k. Reason is as
following:
Size of single IO from fio is larger than bytes allowed in one
throtl_slice in child, so IOs are always queued in child group first.
When queued IOs in child are dispatched to parent group, BIO_BPS_THROTTLED
is set and these IOs will not be limited by tg_within_bps_limit anymore.
Fix this by only set BIO_BPS_THROTTLED when the bio traversed the entire
tree.

There patch has no influence on situation which is not on the default
hierarchy as each group is a single root group without parent.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-3-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-throttle: correct stale comment in throtl_pd_init

On the default hierarchy (cgroup2), the throttle interface files don't
exist in the root cgroup, so the ablity to limit the whole system
by configuring root group is not existing anymore. In general, cgroup
doesn't wanna be in the business of restricting resources at the
system level, so correct the stale comment that we can limit whole
system to we can only limit subtree.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Link: https://lore.kernel.org/r/20221205115709.251489-2-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'floppy-for-6.2' of https://github.com/evdenis/linux-floppy into for-6.2/block

Pull floppy fix from Denis:

"Floppy patch for 6.2

 The patch from Yuan Can fixes a memory leak in floppy init code.

Signed-off-by: Denis Efremov <efremov@linux.com>"
* tag 'floppy-for-6.2' of https://github.com/evdenis/linux-floppy:
  floppy: Fix memory leak in do_floppy_init()

floppy: Fix memory leak in do_floppy_init()

A memory leak was reported when floppy_alloc_disk() failed in
do_floppy_init().

unreferenced object 0xffff888115ed25a0 (size 8):
  comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s)
  hex dump (first 8 bytes):
    00 ac 67 5b 81 88 ff ff                          ..g[....
  backtrace:
    [<000000007f457abb>] __kmalloc_node+0x4c/0xc0
    [<00000000a87bfa9e>] blk_mq_realloc_tag_set_tags.part.0+0x6f/0x180
    [<000000006f02e8b1>] blk_mq_alloc_tag_set+0x573/0x1130
    [<0000000066007fd7>] 0xffffffffc06b8b08
    [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0
    [<00000000e26d04ee>] do_init_module+0x1a4/0x680
    [<000000001bb22407>] load_module+0x6249/0x7110
    [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200
    [<000000007bddca46>] do_syscall_64+0x35/0x80
    [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
unreferenced object 0xffff88810fc30540 (size 32):
  comm "modprobe", pid 727, jiffies 4295051278 (age 25.529s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000007f457abb>] __kmalloc_node+0x4c/0xc0
    [<000000006b91eab4>] blk_mq_alloc_tag_set+0x393/0x1130
    [<0000000066007fd7>] 0xffffffffc06b8b08
    [<0000000081f5ac40>] do_one_initcall+0xd0/0x4f0
    [<00000000e26d04ee>] do_init_module+0x1a4/0x680
    [<000000001bb22407>] load_module+0x6249/0x7110
    [<00000000ad31ac4d>] __do_sys_finit_module+0x140/0x200
    [<000000007bddca46>] do_syscall_64+0x35/0x80
    [<00000000b5afec39>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

If the floppy_alloc_disk() failed, disks of current drive will not be set,
thus the lastest allocated set->tag cannot be freed in the error handling
path. A simple call graph shown as below:

 floppy_module_init()
   floppy_init()
     do_floppy_init()
       for (drive = 0; drive < N_DRIVE; drive++)
         blk_mq_alloc_tag_set()
           blk_mq_alloc_tag_set_tags()
             blk_mq_realloc_tag_set_tags() # set->tag allocated
         floppy_alloc_disk()
           blk_mq_alloc_disk() # error occurred, disks failed to allocated

       ->out_put_disk:
       for (drive = 0; drive < N_DRIVE; drive++)
         if (!disks[drive][0]) # the last disks is not set and loop break
           break;
         blk_mq_free_tag_set() # the latest allocated set->tag leaked

Fix this problem by free the set->tag of current drive before jump to
error handling path.

Cc: stable@vger.kernel.org
Fixes: 302cfee15029 ("floppy: use a separate gendisk for each media format")
Signed-off-by: Yuan Can <yuancan@huawei.com>
[efremov: added stable list, changed title]
Signed-off-by: Denis Efremov <efremov@linux.com>

block: remove devnode callback from struct block_device_operations

With the removal of the pktcdvd driver, there are no in-kernel users of
the devnode callback in struct block_device_operations, so it can be
safely removed.  If it is needed for new block drivers in the future, it
can be brought back.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221203140747.1942969-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge branch 'md-next' of https://git./linux/kernel/git/song/md into for-6.2/block

Pull MD fixes from Song:

"This contains code cleanup by Christoph."

* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: fold unbind_rdev_from_array into md_kick_rdev_from_array
  md: mark md_kick_rdev_from_array static
  md: remove lock_bdev / unlock_bdev

pktcdvd: remove driver.

Way back in 2016 in commit 5a8b187c61e9 ("pktcdvd: mark as unmaintained
and deprecated") this driver was marked as "will be removed soon".  5
years seems long enough to have it stick around after that, so finally
remove the thing now.

Reported-by: Christoph Hellwig <hch@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Maier <balagi@justmail.de>
Cc: Peter Osterlund <petero2@telia.com>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221202182758.1339039-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

md: fold unbind_rdev_from_array into md_kick_rdev_from_array

unbind_rdev_from_array is only called from md_kick_rdev_from_array, so
merge it into its only caller.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

md: mark md_kick_rdev_from_array static

md_kick_rdev_from_array is only used in md.c, so unexport it and mark
the symbol static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

md: remove lock_bdev / unlock_bdev

These wrappers for blkdev_get / blkdev_put just horribly confuse the
code with their odd naming.  Remove them and improve the error unwinding
in md_import_device with the now folded code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>

blk-cgroup: Fix some kernel-doc comments

Make the description of @gendisk to @disk in blkcg_schedule_throttle()
to clear the below warnings:

block/blk-cgroup.c:1850: warning: Function parameter or member 'disk' not described in 'blkcg_schedule_throttle'
block/blk-cgroup.c:1850: warning: Excess function parameter 'gendisk' description in 'blkcg_schedule_throttle'

Fixes: de185b56e8a6 ("blk-cgroup: pass a gendisk to blkcg_schedule_throttle")
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3338
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221202011713.14834-1-yang.lee@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

null_blk: support read-only and offline zone conditions

In zoned mode, zones with write pointers can have conditions "read-only"
or "offline". In read-only condition, zones can not be written. In
offline condition, the zones can be neither written nor read. These
conditions are intended for zones with media failures, then it is
difficult to set those conditions to zones on real devices.

To test handling of zones in the conditions, add a feature to null_blk
to set up zones in read-only or offline condition. Add new configuration
attributes "zone_readonly" and "zone_offline". Write a sector to the
attribute files to specify the target zone to set the zone conditions.
For example, following command lines do it:

   echo 0 > nullb1/zone_readonly
   echo 524288 > nullb1/zone_offline

When the specified zones are already in read-only or offline condition,
normal empty condition is restored to the zones. These condition changes
can be done only after the null_blk device get powered, since status
area of each zone is not yet allocated before power-on.

Also improve zone condition checks to inhibit all commands for zones in
offline conditions. In same manner, inhibit write and zone management
commands for zones in read-only condition.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221201061036.2342206-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: add context parameter to expect() macro

Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-6-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: introduce drbd_ratelimit()

Use call site specific ratelimit instead of one single static global.
Also ratelimit ASSERTION messages generated by expect().

Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-5-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: introduce dynamic debug

Incorporate as many out-of-tree changes as possible without changing the
genl API.

Over the years, we restructured this several times, and also changed the
log format.

One breaking change is that DRBD 9 gained "implicit options", like a
connection name. This cannot be replayed here without changing the API,
so save it for later.

Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Originally-from: Philipp Reisner <philipp.reisner@linbit.com>
Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-4-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: split polymorph printk to its own file

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: unify how failed assertions are logged

Unify how failed assertions from D_ASSERT() and expect() are logged.

Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: bdev & blktrace: use consistent function doc. notation

Use only one hyphen in kernel-doc notation between the function name
and its short description.

The is the documented kerenl-doc format. It also fixes the HTML
presentation to be consistent with other functions.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20221201070331.25685-1-rdunlap@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-iocost: Correct comment in blk_iocost_init

There is no iocg_pd_init function. The pd_alloc_fn function pointer of
iocost policy is set with ioc_pd_init. Just correct it.

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-6-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-iocost: Remove vrate member in struct ioc_now

If we trace vtime_base_rate instead of vtime_rate, there is nowhere
which accesses now->vrate except function ioc_now using now->vrate locally.
Just remove it.

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-5-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-iocost: Trace vtime_base_rate instead of vtime_rate

Since commit ac33e91e2daca ("blk-iocost: implement vtime loss
compensation") rename original vtime_rate to vtime_base_rate
and current vtime_rate is original vtime_rate with compensation.
The current rate showed in tracepoint is mixed with vtime_rate
and vtime_base_rate:
1) In function ioc_adjust_base_vrate, the first trace_iocost_ioc_vrate_adj
shows vtime_rate, the second trace_iocost_ioc_vrate_adj shows
vtime_base_rate.
2) In function iocg_activate shows vtime_rate by calling
TRACE_IOCG_PATH(iocg_activate...
3) In function ioc_check_iocgs shows vtime_rate by calling
TRACE_IOCG_PATH(iocg_idle...

Trace vtime_base_rate instead of vtime_rate as:
1) Before commit ac33e91e2daca ("blk-iocost: implement vtime loss
compensation"), the traced rate is without compensation, so still
show rate without compensation.
2) The vtime_base_rate is more stable while vtime_rate heavily depends on
excess budeget on current period which may change abruptly in next period.

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-4-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-iocost: Reset vtime_base_rate in ioc_refresh_params

Since commit ac33e91e2daca("blk-iocost: implement vtime loss compensation")
split vtime_rate into vtime_rate and vtime_base_rate, we need reset both
vtime_base_rate and vtime_rate when device parameters are refreshed.
If vtime_base_rate is no reset here, vtime_rate will be overwritten with
old vtime_base_rate soon in ioc_refresh_vrate.

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-3-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-iocost: Fix typo in comment

soley -> solely

Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221018121932.10792-2-shikemeng@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Do not reread partition table on exclusively open device

Since commit 10c70d95c0f2 ("block: remove the bd_openers checks in
blk_drop_partitions") we allow rereading of partition table although
there are users of the block device. This has an undesirable consequence
that e.g. if sda and sdb are assembled to a RAID1 device md0 with
partitions, BLKRRPART ioctl on sda will rescan partition table and
create sda1 device. This partition device under a raid device confuses
some programs (such as libstorage-ng used for initial partitioning for
distribution installation) leading to failures.

Fix the problem refusing to rescan partitions if there is another user
that has the block device exclusively open.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221130135344.2ul4cyfstfs3znxg@quack3
Fixes: 10c70d95c0f2 ("block: remove the bd_openers checks in blk_drop_partitions")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221130175653.24299-1-jack@suse.cz
[axboe: fold in followup fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

virtio-blk: replace ida_simple[get|remove] with ida_[alloc_range|free]

ida_simple[get|remove] are deprecated, and are just wrappers to
ida_[alloc_range|free]. Replace ida_simple[get|remove] with their
corresponding counterparts.

No functional changes.

Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20221130123001.25473-1-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: mark blk_put_queue as potentially blocking

We can't just say that the last reference release may block, as any
reference dropped could be the last one.  So move the might_sleep() from
blk_free_queue to blk_put_queue and update the documentation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: untangle request_queue refcounting from sysfs

The kobject embedded into the request_queue is used for the queue
directory in sysfs, but that is a child of the gendisks directory and is
intimately tied to it.  Move this kobject to the gendisk and use a
refcount_t in the request_queue for the actual request_queue refcounting
that is completely unrelated to the device model.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: fix error unwinding in blk_register_queue

blk_register_queue fails to handle errors from blk_mq_sysfs_register,
leaks various resources on errors and accidentally sets queue refs percpu
refcount to percpu mode on kobject_add failure.  Fix all that by
properly unwinding on errors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: factor out a blk_debugfs_remove helper

Split the debugfs removal from blk_unregister_queue into a helper so that
the it can be reused for blk_register_queue error handling.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221114042637.1009333-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-crypto: pass a gendisk to blk_crypto_sysfs_{,un}register

Prepare for changes to the block layer sysfs handling by passing the
readily available gendisk to blk_crypto_sysfs_{,un}register.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042637.1009333-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Revert "blk-cgroup: Flush stats at blkgs destruction path"

This reverts commit dae590a6c96c799434e0ff8156ef29b88c257e60.

We've had a few reports on this causing a crash at boot time, because
of a reference issue. While this problem seemginly did exist before
the patch and needs solving separately, this patch makes it a lot
easier to trigger.

Link: https://lore.kernel.org/linux-block/CA+QYu4oxiRKC6hJ7F27whXy-PRBx=Tvb+-7TQTONN8qTtV3aDA@mail.gmail.com/
Link: https://lore.kernel.org/linux-block/69af7ccb-6901-c84c-0e95-5682ccfb750c@acm.org/
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: use bool as the return type of elv_iosched_allow_bio_merge

We have bool type now, update the old signature.

Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/0db0a0298758d60d0f4df8b7126ac6a381e5a5bb.1669736350.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: replace "len+name" with "name+len" in elv_iosched_show

The "pointer + offset" pattern is more resonable.

Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/d9beaee71b14f7b2a39ab0db6458dc0f7d961ceb.1669736350.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: always use 'e' when printing scheduler name

Printing e->elevator_name in all cases improves the readability, and
'e' and 'cur' are identical in this branch.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Link: https://lore.kernel.org/r/4bae180ffbac608ea0cf46ffa9739ce0973b60aa.1669736350.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: replace continue with else-if in elv_iosched_show

else-if is more readable than continue here.

Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Link: https://lore.kernel.org/r/77ac19ba556efd2c8639a6396eb4203c59bc13d6.1669736350.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: include 'none' for initial elv_iosched_show call

This makes the printing order of the io schedulers consistent, and removes
a redundant q->elevator check.

Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/bdd7083ed4f232e3285f39081e3c5f30b20b8da2.1669736350.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'nvme-6.2-2022-11-29' of git://git.infradead.org/nvme into for-6.2/block

Pull NVMe updates from Christoph:

"nvme updates for Linux 6.2

 - support some passthrough commands without CAP_SYS_ADMIN
   (Kanchan Joshi)
 - refactor PCIe probing and reset (Christoph Hellwig)
 - various fabrics authentication fixes and improvements (Sagi Grimberg)
 - avoid fallback to sequential scan due to transient issues
   (Uday Shankar)
 - implement support for the DEAC bit in Write Zeroes (Christoph Hellwig)
 - allow overriding the IEEE OUI and firmware revision in configfs for
   nvmet (Aleksandr Miloserdov)
 - force reconnect when number of queue changes in nvmet (Daniel Wagner)
 - minor fixes and improvements (Uros Bizjak, Joel Granados,
   Sagi Grimberg, Christoph Hellwig, Christophe JAILLET)"

* tag 'nvme-6.2-2022-11-29' of git://git.infradead.org/nvme: (45 commits)
  nvmet: expose firmware revision to configfs
  nvmet: expose IEEE OUI to configfs
  nvme: rename the queue quiescing helpers
  nvmet: fix a memory leak in nvmet_auth_set_key
  nvme: return err on nvme_init_non_mdts_limits fail
  nvme: avoid fallback to sequential scan due to transient issues
  nvme-rdma: stop auth work after tearing down queues in error recovery
  nvme-tcp: stop auth work after tearing down queues in error recovery
  nvme-auth: have dhchap_auth_work wait for queues auth to complete
  nvme-auth: remove redundant auth_work flush
  nvme-auth: convert dhchap_auth_list to an array
  nvme-auth: check chap ctrl_key once constructed
  nvme-auth: no need to reset chap contexts on re-authentication
  nvme-auth: remove redundant deallocations
  nvme-auth: clear sensitive info right after authentication completes
  nvme-auth: guarantee dhchap buffers under memory pressure
  nvme-auth: don't keep long lived 4k dhchap buffer
  nvme-auth: remove redundant if statement
  nvme-auth: don't override ctrl keys before validation
  nvme-auth: don't ignore key generation failures when initializing ctrl keys
  ...

block: mq-deadline: Rename deadline_is_seq_writes()

Rename deadline_is_seq_writes() to deadline_is_seq_write() (remove the
"s" plural) to more correctly reflect the fact that this function tests
a single request, not multiple requests.

Fixes: 015d02f48537 ("block: mq-deadline: Do not break sequential write streams to zoned HDDs")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221126025550.967914-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-mq: fix possible memleak when register 'hctx' failed

There's issue as follows when do fault injection test:
unreferenced object 0xffff888132a9f400 (size 512):
  comm "insmod", pid 308021, jiffies 4324277909 (age 509.733s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 f4 a9 32 81 88 ff ff  ...........2....
    08 f4 a9 32 81 88 ff ff 00 00 00 00 00 00 00 00  ...2............
  backtrace:
    [<00000000e8952bb4>] kmalloc_node_trace+0x22/0xa0
    [<00000000f9980e0f>] blk_mq_alloc_and_init_hctx+0x3f1/0x7e0
    [<000000002e719efa>] blk_mq_realloc_hw_ctxs+0x1e6/0x230
    [<000000004f1fda40>] blk_mq_init_allocated_queue+0x27e/0x910
    [<00000000287123ec>] __blk_mq_alloc_disk+0x67/0xf0
    [<00000000a2a34657>] 0xffffffffa2ad310f
    [<00000000b173f718>] 0xffffffffa2af824a
    [<0000000095a1dabb>] do_one_initcall+0x87/0x2a0
    [<00000000f32fdf93>] do_init_module+0xdf/0x320
    [<00000000cbe8541e>] load_module+0x3006/0x3390
    [<0000000069ed1bdb>] __do_sys_finit_module+0x113/0x1b0
    [<00000000a1a29ae8>] do_syscall_64+0x35/0x80
    [<000000009cd878b0>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fault injection context as follows:
 kobject_add
 blk_mq_register_hctx
 blk_mq_sysfs_register
 blk_register_queue
 device_add_disk
 null_add_dev.part.0 [null_blk]

As 'blk_mq_register_hctx' may already add some objects when failed halfway,
but there isn't do fallback, caller don't know which objects add failed.
To solve above issue just do fallback when add objects failed halfway in
'blk_mq_register_hctx'.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221117022940.873959-1-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: fix crash in 'blk_mq_elv_switch_none'

Syzbot found the following issue:
general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5234 Comm: syz-executor931 Not tainted 6.1.0-rc3-next-20221102-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022
RIP: 0010:__elevator_get block/elevator.h:94 [inline]
RIP: 0010:blk_mq_elv_switch_none block/blk-mq.c:4593 [inline]
RIP: 0010:__blk_mq_update_nr_hw_queues block/blk-mq.c:4658 [inline]
RIP: 0010:blk_mq_update_nr_hw_queues+0x304/0xe40 block/blk-mq.c:4709
RSP: 0018:ffffc90003cdfc08 EFLAGS: 00010206
RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 000000000000001d RSI: 0000000000000002 RDI: 00000000000000e8
RBP: ffff88801dbd0000 R08: ffff888027c89398 R09: ffffffff8de2e517
R10: fffffbfff1bc5ca2 R11: 0000000000000000 R12: ffffc90003cdfc70
R13: ffff88801dbd0008 R14: ffff88801dbd03f8 R15: ffff888027c89380
FS:  0000555557259300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005d84c8 CR3: 000000007a7cb000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 nbd_start_device+0x153/0xc30 drivers/block/nbd.c:1355
 nbd_start_device_ioctl drivers/block/nbd.c:1405 [inline]
 __nbd_ioctl drivers/block/nbd.c:1481 [inline]
 nbd_ioctl+0x5a1/0xbd0 drivers/block/nbd.c:1521
 blkdev_ioctl+0x36e/0x800 block/ioctl.c:614
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:870 [inline]
 __se_sys_ioctl fs/ioctl.c:856 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

As after dd6f7f17bf58 commit move '__elevator_get(qe->type)' before set
'qe->type', so will lead to access wild pointer.
To solve above issue get 'qe->type' after set 'qe->type'.

Reported-by: syzbot+746a4eece09f86bc39d7@syzkaller.appspotmail.com
Fixes:dd6f7f17bf58("block: add proper helpers for elevator_type module refcount management")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221107033956.3276891-1-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: destroy workqueue when drbd device was freed

A submitter workqueue is dynamically allocated by init_submitter()
called by drbd_create_device(), we should destroy it when this
device is not needed or destroyed.

Fixes: 113fef9e20e0 ("drbd: prepare to queue write requests on a submit worker")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-3-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: remove call to memset before free device/resource/connection

This revert c2258ffc56f2 ("drbd: poison free'd device, resource and
connection structs"), add memset is odd here for debugging, there are
some methods to accurately show what happened, such as kdump.

Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20221124015817.2729789-2-bobo.shaobowang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: mq-deadline: Do not break sequential write streams to zoned HDDs

mq-deadline ensures an in order dispatching of write requests to zoned
block devices using a per zone lock (a bit). This implies that for any
purely sequential write workload, the drive is exercised most of the
time at a maximum queue depth of one.

However, when such sequential write workload crosses a zone boundary
(when sequentially writing multiple contiguous zones), zone write
locking may prevent the last write to one zone to be issued (as the
previous write is still being executed) but allow the first write to the
following zone to be issued (as that zone is not yet being writen and
not locked). This result in an out of order delivery of the sequential
write commands to the device every time a zone boundary is crossed.

While such behavior does not break the sequential write constraint of
zoned block devices (and does not generate any write error), some zoned
hard-disks react badly to seeing these out of order writes, resulting in
lower write throughput.

This problem can be addressed by always dispatching the first request
of a stream of sequential write requests, regardless of the zones
targeted by these sequential writes. To do so, the function
deadline_skip_seq_writes() is introduced and used in
deadline_next_request() to select the next write command to issue if the
target device is an HDD (blk_queue_nonrot() being false).
deadline_fifo_request() is modified using the new
deadline_earlier_request() and deadline_is_seq_write() helpers to ignore
requests in the fifo list that have a preceding request in lba order
that is sequential.

With this fix, a sequential write workload executed with the following
fio command:

fio  --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \
     --size=68719476736  --ioengine=libaio --iodepth=32 --rw=write \
     --bs=65536

results in an increase from 225 MB/s to 250 MB/s of the write throughput
of an SMR HDD (11% increase).

Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: mq-deadline: Fix dd_finish_request() for zoned devices

dd_finish_request() tests if the per prio fifo_list is not empty to
determine if request dispatching must be restarted for handling blocked
write requests to zoned devices with a call to
blk_mq_sched_mark_restart_hctx(). While simple, this implementation has
2 problems:

1) Only the priority level of the completed request is considered.
   However, writes to a zone may be blocked due to other writes to the
   same zone using a different priority level. While this is unlikely to
   happen in practice, as writing a zone with different IO priorirites
   does not make sense, nothing in the code prevents this from
   happening.
2) The use of list_empty() is dangerous as dd_finish_request() does not
   take dd->lock and may run concurrently with the insert and dispatch
   code.

Fix these 2 problems by testing the write fifo list of all priority
levels using the new helper dd_has_write_work(), and by testing each
fifo list using list_empty_careful().

Fixes: c807ab520fc3 ("block/mq-deadline: Add I/O priority support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20221124021208.242541-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-crypto: Add a missing include directive

Allow the compiler to verify consistency of function declarations and
function definitions. This patch fixes the following sparse errors:

block/blk-crypto-profile.c:241:14: error: no previous prototype for ‘blk_crypto_get_keyslot’ [-Werror=missing-prototypes]
  241 | blk_status_t blk_crypto_get_keyslot(struct blk_crypto_profile *profile,
      |              ^~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:318:6: error: no previous prototype for ‘blk_crypto_put_keyslot’ [-Werror=missing-prototypes]
  318 | void blk_crypto_put_keyslot(struct blk_crypto_keyslot *slot)
      |      ^~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:344:6: error: no previous prototype for ‘__blk_crypto_cfg_supported’ [-Werror=missing-prototypes]
  344 | bool __blk_crypto_cfg_supported(struct blk_crypto_profile *profile,
      |      ^~~~~~~~~~~~~~~~~~~~~~~~~~
block/blk-crypto-profile.c:373:5: error: no previous prototype for ‘__blk_crypto_evict_key’ [-Werror=missing-prototypes]
  373 | int __blk_crypto_evict_key(struct blk_crypto_profile *profile,
      |     ^~~~~~~~~~~~~~~~~~~~~~

Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221123172923.434339-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

elevator: remove an outdated comment in elevator_change

mq is no longer a special case.

Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/cbf47824fc726440371e74c867bf635ae1b671a3.1669126766.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

elevator: update the document of elevator_match

elevator_match does not care about elevator_features any more. Remove
related descriptions from its document.

Fixes: ffb86425ee2c ("block: don't check for required features in elevator_match")
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/a58424555202c07a9ccf7f60c3ad7e247da09e25.1669126766.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

elevator: printk a warning if switching to a new io scheduler fails

printk a warning to indicate that the io scheduler has been set to none
if switching to a new io scheduler fails.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/d51ed0fb457db7a4f9cbb0dbce36d534e22be457.1669126766.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

elevator: update the document of elevator_switch

We no longer support falling back to the old io scheduler if switching to
the new one fails. Update the document to indicate that.

Fixes: a1ce35fa4985 ("block: remove dead elevator code")
Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/94250961689ba7d2e67a7d9e7995a11166fedb31.1669126766.git.nickyc975@zju.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drbd: use consistent license

DRBD currently has a mix of GPL-2.0 and GPL-2.0-or-later SPDX license
identifiers. We have decided to stick with GPL 2.0 only, so consistently
use that identifier.

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221122134301.69258-5-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

lru_cache: remove unused lc_private, lc_set, lc_index_of

Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221122134301.69258-4-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

lru_cache: remove compiled out code

Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221122134301.69258-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

lru_cache: use atomic operations when accessing lc->flags, always

Or, depending on the way locking is implemented at the call sites,
some updates could be lost (has not been observed).

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221122134301.69258-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: fix missing nr_hw_queues update in blk_mq_realloc_tag_set_tags

The commit ee9d55210c2f ("blk-mq: simplify blk_mq_realloc_tag_set_tags")
cleaned up the function blk_mq_realloc_tag_set_tags. After this change,
the function does not update nr_hw_queues of struct blk_mq_tag_set when
new nr_hw_queues value is smaller than original. This results in failure
of queue number change of block devices. To avoid the failure, add the
missing nr_hw_queues update.

Fixes: ee9d55210c2f ("blk-mq: simplify blk_mq_realloc_tag_set_tags")
Reported-by: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/linux-block/20221118140640.featvt3fxktfquwh@shindev/
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221122084917.2034220-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-crypto: move internal only declarations to blk-crypto-internal.h

 blk_crypto_get_keyslot, blk_crypto_put_keyslot, __blk_crypto_evict_key
and __blk_crypto_cfg_supported are only used internally by the
blk-crypto code, so move the out of blk-crypto-profile.h, which is
included by drivers that supply blk-crypto functionality.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-crypto: add a blk_crypto_config_supported_natively helper

Add a blk_crypto_config_supported_natively helper that wraps
__blk_crypto_cfg_supported to retrieve the crypto_profile from the
request queue.  With this fscrypt can stop including
blk-crypto-profile.h and rely on the public consumer interface in
blk-crypto.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-crypto: don't use struct request_queue for public interfaces

Switch all public blk-crypto interfaces to use struct block_device
arguments to specify the device they operate on instead of th
request_queue, which is a block layer implementation detail.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvmet: expose firmware revision to configfs

Allow user to set currently active firmware revision

Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: expose IEEE OUI to configfs

Allow user to set OUI for the controller vendor.

Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: rename the queue quiescing helpers

Naming the nvme helpers that wrap the block quiesce functionality
_start/_stop is rather confusing.  Switch to using the quiesce naming
used by the block layer instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

blk-cgroup: Flush stats at blkgs destruction path

As noted by Michal, the blkg_iostat_set's in the lockless list
hold reference to blkg's to protect against their removal. Those
blkg's hold reference to blkcg. When a cgroup is being destroyed,
cgroup_rstat_flush() is only called at css_release_work_fn() which is
called when the blkcg reference count reaches 0. This circular dependency
will prevent blkcg from being freed until some other events cause
cgroup_rstat_flush() to be called to flush out the pending blkcg stats.

To prevent this delayed blkcg removal, add a new cgroup_rstat_css_flush()
function to flush stats for a given css and cpu and call it at the blkgs
destruction path, blkcg_destroy_blkgs(), whenever there are still some
pending stats to be flushed. This will ensure that blkcg reference
count can reach 0 ASAP.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221105005902.407297-4-longman@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-cgroup: Optimize blkcg_rstat_flush()

For a system with many CPUs and block devices, the time to do
blkcg_rstat_flush() from cgroup_rstat_flush() can be rather long. It
can be especially problematic as interrupt is disabled during the flush.
It was reported that it might take seconds to complete in some extreme
cases leading to hard lockup messages.

As it is likely that not all the percpu blkg_iostat_set's has been
updated since the last flush, those stale blkg_iostat_set's don't need
to be flushed in this case. This patch optimizes blkcg_rstat_flush()
by keeping a lockless list of recently updated blkg_iostat_set's in a
newly added percpu blkcg->lhead pointer.

The blkg_iostat_set is added to a lockless list on the update side
in blk_cgroup_bio_start(). It is removed from the lockless list when
flushed in blkcg_rstat_flush(). Due to racing, it is possible that
blk_iostat_set's in the lockless list may have no new IO stats to be
flushed, but that is OK.

To protect against destruction of blkg, a percpu reference is gotten
when putting into the lockless list and put back when removed.

When booting up an instrumented test kernel with this patch on a
2-socket 96-thread system with cgroup v2, out of the 2051 calls to
cgroup_rstat_flush() after bootup, 1788 of the calls were exited
immediately because of empty lockless list. After an all-cpu kernel
build, the ratio became 6295424/6340513. That was more than 99%.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221105005902.407297-3-longman@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-cgroup: Return -ENOMEM directly in blkcg_css_alloc() error path

For blkcg_css_alloc(), the only error that will be returned is -ENOMEM.
Simplify error handling code by returning this error directly instead
of setting an intermediate "ret" variable.

Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20221105005902.407297-2-longman@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: don't allow a disk link holder to itself

After creating a dm device, then user can reload such dm with itself,
and dead loop will be triggered because dm keep looking up to itself.

Test procedures:

1) dmsetup create test --table "xxx sda", assume dm-0 is created
2) dmsetup suspend test
3) dmsetup reload test --table "xxx dm-0"
4) dmsetup resume test

Test result:

BUG: TASK stack guard page was hit at 00000000736a261f (stack is 000000008d12c88d..00000000c8dd82d5)
stack guard page: 0000 [#1] PREEMPT SMP
CPU: 29 PID: 946 Comm: systemd-udevd Not tainted 6.1.0-rc3-next-20221101-00006-g17640ca3b0ee #1295
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
RIP: 0010:dm_prepare_ioctl+0xf/0x1e0
Code: da 48 83 05 4a 7c 99 0b 01 41 89 c4 eb cd e8 b8 1f 40 00 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 48 83 05 a1 5a 99 0b 01 <41> 56 49 89 d6 41 55 4c 8d af 90 02 00 00 9
RSP: 0018:ffffc90002090000 EFLAGS: 00010206
RAX: ffff8881049d6800 RBX: ffff88817e589000 RCX: 0000000000000000
RDX: ffffc90002090010 RSI: ffffc9000209001c RDI: ffff88817e589000
RBP: 00000000484a101d R08: 0000000000000000 R09: 0000000000000007
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000005331
R13: 0000000000005331 R14: 0000000000000000 R15: 0000000000000000
FS:  00007fddf9609200(0000) GS:ffff889fbfd40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc9000208fff8 CR3: 0000000179043000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 dm_blk_ioctl+0x50/0x1c0
 ? dm_prepare_ioctl+0xe0/0x1e0
 dm_blk_ioctl+0x88/0x1c0
 dm_blk_ioctl+0x88/0x1c0
 ......(a lot of same lines)
 dm_blk_ioctl+0x88/0x1c0
 dm_blk_ioctl+0x88/0x1c0
 blkdev_ioctl+0x184/0x3e0
 __x64_sys_ioctl+0xa3/0x110
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fddf7306577
Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 88 8
RSP: 002b:00007ffd0b2ec318 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00005634ef478320 RCX: 00007fddf7306577
RDX: 0000000000000000 RSI: 0000000000005331 RDI: 0000000000000007
RBP: 0000000000000007 R08: 00005634ef4843e0 R09: 0000000000000080
R10: 00007fddf75cfb38 R11: 0000000000000246 R12: 00000000030d4000
R13: 0000000000000000 R14: 0000000000000000 R15: 00005634ef48b800
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:dm_prepare_ioctl+0xf/0x1e0
Code: da 48 83 05 4a 7c 99 0b 01 41 89 c4 eb cd e8 b8 1f 40 00 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 48 83 05 a1 5a 99 0b 01 <41> 56 49 89 d6 41 55 4c 8d af 90 02 00 00 9
RSP: 0018:ffffc90002090000 EFLAGS: 00010206
RAX: ffff8881049d6800 RBX: ffff88817e589000 RCX: 0000000000000000
RDX: ffffc90002090010 RSI: ffffc9000209001c RDI: ffff88817e589000
RBP: 00000000484a101d R08: 0000000000000000 R09: 0000000000000007
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000005331
R13: 0000000000005331 R14: 0000000000000000 R15: 0000000000000000
FS:  00007fddf9609200(0000) GS:ffff889fbfd40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc9000208fff8 CR3: 0000000179043000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: disabled
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fix the problem by forbidding a disk to create link to itself.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-11-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: store the holder kobject in bd_holder_disk

We hold a reference to the holder kobject for each bd_holder_disk,
so to make the code a bit more robust, use a reference to it instead
of the block_device.  As long as no one clears ->bd_holder_dir in
before freeing the disk, this isn't strictly required, but it does
make the code more clear and more robust.

Orignally-From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-10-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: fix use after free for bd_holder_dir

Currently, the caller of bd_link_disk_holer() get 'bdev' by
blkdev_get_by_dev(), which will look up 'bdev' by inode number 'dev'.
Howerver, it's possible that del_gendisk() can be called currently, and
'bd_holder_dir' can be freed before bd_link_disk_holer() access it, thus
use after free is triggered.

t1: t2:
bdev = blkdev_get_by_dev
del_gendisk
 kobject_put(bd_holder_dir)
  kobject_free()
bd_link_disk_holder

Fix the problem by checking disk is still live and grabbing a reference
to 'bd_holder_dir' first in bd_link_disk_holder().

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-9-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove delayed holder registration

Now that dm has been fixed to track of holder registrations before
add_disk, the somewhat buggy block layer code can be safely removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20221115141054.1051801-8-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: track per-add_disk holder relations in DM

dm is a bit special in that it opens the underlying devices.  Commit
89f871af1b26 ("dm: delay registering the gendisk") tried to accommodate
that by allowing to add the holder to the list before add_gendisk and
then just add them to sysfs once add_disk is called.  But that leads to
really odd lifetime problems and error handling problems as we can't
know the state of the kobjects and don't unwind properly.  To fix this
switch to just registering all existing table_devices with the holder
code right after add_disk, and remove them before calling del_gendisk.

Fixes: 89f871af1b26 ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-7-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: make sure create and remove dm device won't race with open and close table

open_table_device() and close_table_device() is protected by
table_devices_lock, hence use it to protect add_disk() and
del_gendisk().

Prepare to track per-add_disk holder relations in dm.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221115141054.1051801-6-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: cleanup close_table_device

Take the list unlink and free into close_table_device so that no half
torn down table_devices exist.  Also remove the check for a NULL bdev
as that can't happen - open_table_device never adds a table_device to
the list that does not have a valid block_device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: cleanup open_table_device

Move all the logic for allocation the table_device and linking it into
the list into the open_table_device.  This keeps the code tidy and
ensures that the table_devices only exist in fully initialized state.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: remove free_table_devices

free_table_devices just warns and frees all table_device structures when
the target removal did not remove them.  This should never happen, but
if it did, just freeing the structure without deleting them from the
list or cleaning up the resources would not help at all.  So just WARN on
a non-empty list instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: clear ->slave_dir when dropping the main slave_dir reference

Zero out the pointer to ->slave_dir so that the holder code doesn't
incorrectly treat the object as alive when add_disk failed or after
del_gendisk was called.

Fixes: 89f871af1b26 ("dm: delay registering the gendisk")
Reported-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221115141054.1051801-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sbitmap: Try each queue to wake up at least one waiter

Jan reported the new algorithm as merged might be problematic if the
queue being awaken becomes empty between the waitqueue_active inside
sbq_wake_ptr check and the wake up.  If that happens, wake_up_nr will
not wake up any waiter and we loose too many wake ups.  In order to
guarantee progress, we need to wake up at least one waiter here, if
there are any.  This now requires trying to wake up from every queue.

Instead of walking through all the queues with sbq_wake_ptr, this call
moves the wake up inside that function.  In a previous version of the
patch, I found that updating wake_index several times when walking
through queues had a measurable overhead.  This ensures we only update
it once, at the end.

Fixes: 4f8126bb2308 ("sbitmap: Use single per-bitmap counting to wake up queued tags")
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-4-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

wait: Return number of exclusive waiters awaken

Sbitmap code will need to know how many waiters were actually woken for
its batched wakeups implementation.  Return the number of woken
exclusive waiters from __wake_up() to facilitate that.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

sbitmap: Advance the queue index before waking up a queue

When a queue is awaken, the wake_index written by sbq_wake_ptr currently
keeps pointing to the same queue.  On the next wake up, it will thus
retry the same queue, which is unfair to other queues, and can lead to
starvation.  This patch, moves the index update to happen before the
queue is returned, such that it will now try a different queue first on
the next wake up, improving fairness.

Fixes: 4f8126bb2308 ("sbitmap: Use single per-bitmap counting to wake up queued tags")
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20221115224553.23594-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: remove blkdev_writepages

While the block device code should switch to implementing
->writepages instead of ->writepage eventually, the current
implementation is entirely pointless as it does the same looping over
->writepage as the generic code if no ->writepages is present.

Remove blkdev_writepages so that we can eventually unexport
generic_writepages.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221116132035.2192924-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring/rw: enable bio caches for IRQ rw

Now we can use IOCB_ALLOC_CACHE not only for iopoll'ed reads/write but
also for normal IRQ driven I/O.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fb8bd092ed5a4a3b037e84e4777074d07aa5639a.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio: shrink max number of pcpu cached bios

The downside of the bio pcpu cache is that bios of a cpu will be never
freed unless there is new I/O issued from that cpu. We currently keep
max 512 bios, which feels too much, half it.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bc198e8efb27d8c740d80c8ce477432729075096.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio: add pcpu caching for non-polling bio_put

This patch extends REQ_ALLOC_CACHE to IRQ completions, whenever
currently it's only limited to iopoll. Instead of guarding the list with
irq toggling on alloc, which is expensive, it keeps an additional
irq-safe list from which bios are spliced in batches to ammortise
overhead. On the put side it toggles irqs, but in many cases they're
already disabled and so cheap.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c2306de96b900ab9264f4428ec37768ddcf0da36.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio: split pcpu cache part of bio_put into a helper

Extract a helper out of bio_put for recycling into percpu caches.
It's a preparation patch without functional changes.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e97ab2026a89098ee1bfdd09bcb9451fced95f87.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bio: don't rob starving biosets of bios

Biosets keep a mempool, so as long as requests complete we can always
can allocate and have forward progress. Percpu bio caches break that
assumptions as we may complete into the cache of one CPU and after try
and fail to allocate with another CPU. We also can't grab from another
CPU's cache without tricky sync.

If we're allocating with a bio while the mempool is undersaturated,
remove REQ_ALLOC_CACHE flag, so on put it will go straight to mempool.
It might try to free into mempool more requests than required, but
assuming than there is no memory starvation in the system it'll
stabilise and never hit that path.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/aa150caf9c263fa92269e86d7826cc8fa65f38de.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

mempool: introduce mempool_is_saturated

Introduce a helper mempool_is_saturated(), which tells if the mempool is
under-filled or not. We need it to figure out whether it should be
freed right into the mempool or could be cached with top level caches.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/636aed30be8c35d78f45e244998bc6209283cccc.1667384020.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvmet: fix a memory leak in nvmet_auth_set_key

When changing dhchap secrets we need to release the old
secrets as well.

kmemleak complaint:
--
unreferenced object 0xffff8c7f44ed8180 (size 64):
  comm "check", pid 7304, jiffies 4295686133 (age 72034.246s)
  hex dump (first 32 bytes):
    44 48 48 43 2d 31 3a 30 30 3a 4c 64 4c 4f 64 71  DHHC-1:00:LdLOdq
    79 56 69 67 77 48 55 32 6d 5a 59 4c 7a 35 59 38  yVigwHU2mZYLz5Y8
  backtrace:
    [<00000000b6fc5071>] kstrdup+0x2e/0x60
    [<00000000f0f4633f>] 0xffffffffc0e07ee6
    [<0000000053006c05>] 0xffffffffc0dff783
    [<00000000419ae922>] configfs_write_iter+0xb1/0x120
    [<000000008183c424>] vfs_write+0x2be/0x3c0
    [<000000009005a2a5>] ksys_write+0x5f/0xe0
    [<00000000cd495c89>] do_syscall_64+0x38/0x90
    [<00000000f2a84ac5>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: return err on nvme_init_non_mdts_limits fail

In nvme_init_non_mdts_limits function we were returning 0 when kzalloc
failed; it now returns -ENOMEM.

Fixes: 5befc7c26e5a ("nvme: implement non-mdts command limits")
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: avoid fallback to sequential scan due to transient issues

Currently, if nvme_scan_ns_list fails, nvme_scan_work will fall back to
a sequential scan. nvme_scan_ns_list can fail for a variety of reasons,
e.g. a transient transport issue, and the resulting sequential scan can
be extremely expensive on controllers reporting an NN value close to the
maximum allowed (> 4 billion). Avoid sequential scans wherever possible
by only falling back to them in two cases:

- When the NVMe version supported (VS) value reported by the device is
  older than NVME_VS(1, 1, 0), before which support of Identify NS List
  not required.
- When the Identify NS List command fails with the DNR bit set in the
  status. This is to accommodate (non-compliant) devices which report a
  VS value which implies support for Identify NS List, but nevertheless
  do not support the command. Such devices will most likely fail the
  command with the DNR bit set.

The third case is when the device claims support for Identify NS List
but the command fails with DNR not set. In such cases, fallback to
sequential scan is potentially expensive and likely unnecessary, as a
retry of the list scan should succeed. So this change skips the fallback
in this third case.

Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-rdma: stop auth work after tearing down queues in error recovery

when starting error recovery there might be a authentication work
running, and it involves I/O commands. Given the controller is tearing
down there is no chance for the I/O to complete other than timing out
which may unnecessarily take a full io timeout.

So first tear down the queues, fail/cancel all inflight I/O (including
potentially authentication) and only then stop authentication. This
ensures that failover is not stalled due to blocked authentication I/O.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-tcp: stop auth work after tearing down queues in error recovery

when starting error recovery there might be a authentication work
running, and it involves I/O commands. Given the controller is tearing
down there is no chance for the I/O to complete other than timing out
which may unnecessarily take a full io timeout.

So first tear down the queues, fail/cancel all inflight I/O (including
potentially authentication) and only then stop authentication. This
ensures that failover is not stalled due to blocked authentication I/O.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-auth: have dhchap_auth_work wait for queues auth to complete

It triggered the queue authentication work elements in parallel, but
the ctrl authentication work itself completes when all of them
completes. Hence wait for queues auth completions.

This also makes nvme_auth_stop simply a sync cancel of ctrl
dhchap_auth_work.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-auth: remove redundant auth_work flush

only ctrl deletion calls nvme_auth_free, which was stopped prior in the
teardown stage, so there is no possibility that it should ever run when
nvme_auth_free is called. As a result, we can remove a local chap pointer
variable.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-auth: convert dhchap_auth_list to an array

We know exactly how many dhchap contexts we will need, there is no need
to hold a list that we need to protect with a mutex. Convert to
a dynamically allocated array. And dhchap_context access state is
maintained by the chap itself.

Make dhchap_auth_mutex protect only the ctrl host_key and ctrl_key
in a fine-grained lock such that there is no long lasting acquisition
of the lock and no need to take/release this lock when flushing
authentication works.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-auth: check chap ctrl_key once constructed

ctrl ctrl_key member may be overwritten from a sysfs context driven
by the user. Once a queue local copy was created, use that instead
to minimize checks on a shared resource.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-auth: no need to reset chap contexts on re-authentication

Now that the chap context is reset upon completion, this is no longer
needed. Also remove nvme_auth_reset as no callers are left.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-auth: remove redundant deallocations

These are now redundant as the dhchap context is
removed after authentication completes.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-auth: clear sensitive info right after authentication completes

We don't want to keep authentication sensitive info in memory for unlimited
amount of time.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>