hid: cp2112: Fix IRQ shutdown stopping polling for all IRQs on chip

[ Upstream commit dc3115e6c5d9863ec1a9ff1acf004ede93c34361 ]

Previously cp2112_gpio_irq_shutdown() always cancelled the
gpio_poll_worker, even if other IRQs were still active, and did not set
the gpio_poll flag to false. This resulted in any call to _shutdown()
resulting in interrupts no longer functioning on the chip until a
_remove() occurred (a.e. the cp2112 is unplugged or system rebooted).

Only cancel polling if all IRQs are disabled/masked, and correctly set
the gpio_poll flag, allowing polling to restart when an interrupt is
next enabled.

Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Link: https://lore.kernel.org/r/20231011182317.1053344-1-danny.kaehn@plexus.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hfi1: Workaround truncation compilation error

[ Upstream commit d4b2d165714c0ce8777d5131f6e0aad617b7adc4 ]

Increase name array to be large enough to overcome the following
compilation error.

drivers/infiniband/hw/hfi1/efivar.c: In function ‘read_hfi1_efi_var’:
drivers/infiniband/hw/hfi1/efivar.c:124:44: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
  124 |         snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                                            ^
drivers/infiniband/hw/hfi1/efivar.c:124:9: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
  124 |         snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/hfi1/efivar.c:133:52: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
  133 |                 snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                                                    ^
drivers/infiniband/hw/hfi1/efivar.c:133:17: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
  133 |                 snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:243: drivers/infiniband/hw/hfi1/efivar.o] Error 1

Fixes: c03c08d50b3d ("IB/hfi1: Check upper-case EFI variables")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/238fa39a8fd60e87a5ad7e1ca6584fcdf32e9519.1698159993.git.leonro@nvidia.com
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Leave space for '\0' in utf8 desc string

[ Upstream commit a75a16c62a2540f11eeae4f2b50e95deefb652ea ]

utf16s_to_utf8s does not NULL terminate the output string. For us to be
able to add a NULL character when utf16s_to_utf8s returns, we need to make
sure that there is space for such NULL character at the end of the output
buffer. We can achieve this by passing an output buffer size to
utf16s_to_utf8s that is one character less than what we allocated.

Other call sites of utf16s_to_utf8s appear to be using the same technique
where they artificially reduce the buffer size by one to leave space for a
NULL character or line feed character.

Fixes: 4b828fe156a6 ("scsi: ufs: revamp string descriptor reading")
Reviewed-by: Mars Cheng <marscheng@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Yen-lin Lai <yenlinlai@google.com>
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://lore.kernel.org/r/20231017182026.2141163-1-danielmentz@google.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl: Fix PM disable depth imbalance in fsl_easrc_probe

[ Upstream commit 9e630efb5a4af56fdb15aa10405f5cfd3f5f5b83 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_disable when error returns.

Fixes: 955ac624058f ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C0D62E6D89818179A02A04A0C248F0DDC40A@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: intel: sof_sdw: Stop processing CODECs when enough are found

[ Upstream commit 28809aaeabdf2c01ffe597553146527d1fba3589 ]

When adding CODECs to a DAI link, the code should stop processing more
CODECs when the expected number of CODECs are discovered. This fixes a
small corner case issue introduced when support for different devices
on the same SoundWire link was added. In the case of aggregated
devices everything is fine, as all devices intended for the DAI link
will be marked with the same group and any not intended for that DAI
are skipped by the group check. However for non-aggregated devices the
group check is bypassed and the current code does not stop after it
has found the first device. Meaning if additional non-aggregated devices
are present on the same SoundWire link they will be erroneously added
into the DAI link.

Fix this issue, and provide a small optimisation by ceasing to process
devices once we have reached the required number of devices for the
current DAI link.

Fixes: 317dcdecaf7a ("ASoC: intel: sof_sdw: Allow different devices on the same link")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: core: Ensure sof_ops_free() is still called when probe never ran.

[ Upstream commit f549a82aff57865c47b5abd17336b23cd9bb2d2c ]

In an effort to not call sof_ops_free twice, we stopped running it when
probe was aborted.

Check the result of cancel_work_sync to see if this was the case.

Fixes: 31bb7bd9ffee ("ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful")
Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix init failure of RoCE VF and HIP08

[ Upstream commit 07f06e0e5cd99555c861e874716d9e2627655fd5 ]

During device init, a struct for HW stats will be allocated. As HW
stats are not supported for VF and HIP08, currently
hns_roce_alloc_hw_port_stats() returns NULL in this case. However,
ib-core considers the returned NULL pointer as memory allocation
failure and returns ENOMEM, eventually leading to the failure of VF
and HIP08 init.

In the case where the driver does not support the .alloc_hw_port_stats()
ops, ib-core will return EOPNOTSUPP and ignore this error code in the
upper layer function. So for VF and HIP08, just don't set the HW stats
ops to ib-core.

Fixes: 5a87279591a1 ("RDMA/hns: Support hns HW stats")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix unnecessary port_num transition in HW stats allocation

[ Upstream commit b4a797b894dc91a541ea230db6fa00cc74683bfd ]

The num_ports capability of devices should be compared with the
number of port(i.e. the input param "port_num") but not the port
index(i.e. port_num - 1).

Fixes: 5a87279591a1 ("RDMA/hns: Support hns HW stats")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: The UD mode can only be configured with DCQCN

[ Upstream commit 27c5fd271d8b8730fc0bb1b6cae953ad7808a874 ]

Due to hardware limitations, only DCQCN is supported for UD. Therefore, the
default algorithm for UD is set to DCQCN.

Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Add check for SL

[ Upstream commit 5e617c18b1f34ec57ad5dce44f09de603cf6bd6c ]

SL set by users may exceed the capability of devices. So add check
for this situation.

Fixes: fba429fcf9a5 ("RDMA/hns: Fix missing fields in address vector")
Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: f0cb411aad23 ("RDMA/hns: Use new interface to modify QP context")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix signed-unsigned mixed comparisons

[ Upstream commit b5f9efff101b06fd06a5e280a2b00b1335f5f476 ]

The ib_mtu_enum_to_int() and uverbs_attr_get_len() may returns a negative
value. In this case, mixed comparisons of signed and unsigned types will
throw wrong results.

This patch adds judgement for this situation.

Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()

[ Upstream commit c64e9710f9241e38a1c761ed1c1a30854784da66 ]

ucmd in hns_roce_create_qp_common() are not initialized. But it works fine
until new member sdb_addr is added to struct hns_roce_ib_create_qp.

If the user-mode driver uses an old version ABI, then the value of the new
member will be undefined after ib_copy_from_udata().

This patch fixes it by initialize this variable to 0. And the default value
of the new member sdb_addr will be 0 which is invalid.

Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix printing level of asynchronous events

[ Upstream commit 9faef73ef4f6666b97e04d99734ac09251098185 ]

The current driver will print all asynchronous events. Some of the
print levels are set improperly, e.g. SRQ limit reach and SRQ last
wqe reach, which may also occur during normal operation of the software.
Currently, the information of these event is printed as a warning,
which causes a large amount of printing even during normal use of the
application. As a result, the service performance deteriorates.

This patch fixes the printing storms by modifying the print level.

Fixes: b00a92c8f2ca ("RDMA/hns: Move all prints out of irq handle")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Fix rdma counter binding for RAW QP

[ Upstream commit c1336bb4aa5e809a622a87d74311275514086596 ]

Previously when we had a RAW QP, we bound a counter to it when it moved
to INIT state, using the counter context inside RQC.

But when we try to modify that counter later in RTS state we used
modify QP which tries to change the counter inside QPC instead of RQC.

Now we correctly modify the counter set_id inside of RQC instead of QPC
for the RAW QP.

Fixes: d14133dd4161 ("IB/mlx5: Support set qp counter")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/2e5ab6713784a8fe997d19c508187a0dfecf2dfc.1696847964.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: fix no ack after final message

[ Upstream commit 6212e4528b248a4bc9b4fe68e029a84689c67461 ]

In case of an final DLM message we can't should not send an ack out
after the final message. This patch moves the ack message before the
messages will be transmitted. If it's the final message and the
receiving node turns into DLM_CLOSED state another ack messages will
being received and turning the receiving node into DLM_ESTABLISHED
again.

Fixes: 1696c75f1864 ("fs: dlm: add send ack threshold and append acks to msgs")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: be sure we reset all nodes at forced shutdown

[ Upstream commit e759eb3e27e5b624930548f1c0eda90da6e26ee9 ]

In case we running in a force shutdown in either midcomms or lowcomms
implementation we will make sure we reset all per midcomms node
information.

Fixes: 63e711b08160 ("fs: dlm: create midcomms nodes when configure")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: fix remove member after close call

[ Upstream commit 2776635edc7fcd62e03cb2efb93c31f685887460 ]

The idea of commit 63e711b08160 ("fs: dlm: create midcomms nodes when
configure") is to set the midcomms node lifetime when a node joins or
leaves the cluster. Currently we can hit the following warning:

[10844.611495] ------------[ cut here ]------------
[10844.615913] WARNING: CPU: 4 PID: 84304 at fs/dlm/midcomms.c:1263
dlm_midcomms_remove_member+0x13f/0x180 [dlm]

or running in a state where we hit a midcomms node usage count in a
negative value:

[  260.830782] node 2 users dec count -1

The first warning happens when the a specific node does not exists and
it was probably removed but dlm_midcomms_close() which is called when a
node leaves the cluster. The second kernel log message is probably in a
case when dlm_midcomms_addr() is called when a joined the cluster but
due fencing a node leaved the cluster without getting removed from the
lockspace. If the node joins the cluster and it was removed from the
cluster due fencing the first call is to remove the node from lockspaces
triggered by the user space. In both cases if the node wasn't found or
the user count is zero, we should ignore any additional midcomms handling
of dlm_midcomms_remove_member().

Fixes: 63e711b08160 ("fs: dlm: create midcomms nodes when configure")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dlm: fix creating multiple node structures

[ Upstream commit fe9b619e6e94acf0b068fb1a8f658f5a96b8fad7 ]

This patch will lookup existing nodes instead of always creating them
when dlm_midcomms_addr() is called. The idea is here to create midcomms
nodes when user space getting informed that nodes joins the cluster. This
is the case when dlm_midcomms_addr() is called, however it can be called
multiple times by user space to add several address configurations to one
node e.g. when using SCTP. Those multiple times need to be filtered out
and we doing that by looking up if the node exists before. Due configfs
entry it is safe that this function gets only called once at a time.

Fixes: 63e711b08160 ("fs: dlm: create midcomms nodes when configure")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: dlm: Fix the size of a buffer in dlm_create_debug_file()

[ Upstream commit b859e01054354033f480d9df41b0ebc2c7537379 ]

8 is not the maximum size of the suffix used when creating debugfs files.

Let the compiler compute the correct size, and only give a hint about the
longest possible string that is used.

When building with W=1, this fixes the following warnings:

  fs/dlm/debug_fs.c: In function ‘dlm_create_debug_file’:
  fs/dlm/debug_fs.c:1020:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
   1020 |         snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_waiters", ls->ls_name);
        |                                                          ^
  fs/dlm/debug_fs.c:1020:9: note: ‘snprintf’ output between 9 and 73 bytes into a destination of size 72
   1020 |         snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_waiters", ls->ls_name);
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  fs/dlm/debug_fs.c:1031:50: error: ‘_queued_asts’ directive output may be truncated writing 12 bytes into a region of size between 8 and 72 [-Werror=format-truncation=]
   1031 |         snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_queued_asts", ls->ls_name);
        |                                                  ^~~~~~~~~~~~
  fs/dlm/debug_fs.c:1031:9: note: ‘snprintf’ output between 13 and 77 bytes into a destination of size 72
   1031 |         snprintf(name, DLM_LOCKSPACE_LEN + 8, "%s_queued_asts", ls->ls_name);
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 541adb0d4d10b ("fs: dlm: debugfs for queued callbacks")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl-asoc-card: Add comment for mclk in the codec_priv

[ Upstream commit fbfe616ad40c06d68b83b657a94cd2e709dda37b ]

Otherwise a warning will be detected as below:
warning: Function parameter or member 'mclk' not described in
'codec_priv'

Fixes: 1075df4bdeb3 ("ASoC: fsl-asoc-card: add nau8822 support")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20231007040117.22446-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw_rt_sdca_jack_common: add rt713 support

[ Upstream commit b6d6e5abf64562985fdbbdbdfe8088cde634d834 ]

Adding rt713 support to sof_sdw_rt_sdca_jack_common.c.

Fixes: fbaaf80d8cf6 ("ASoC: Intel: sof_sdw: add rt713 support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231012190826.142619-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

backlight: pwm_bl: Disable PWM on shutdown, suspend and remove

[ Upstream commit 40da4737717b252fd01d92ff38d3b95a491167cc ]

Since commit 00e7e698bff1 ("backlight: pwm_bl: Configure pwm only once
per backlight toggle") calling pwm_backlight_power_off() doesn't disable
the PWM any more. However this is necessary to suspend because PWM
drivers usually refuse to suspend if they are still enabled.

Also adapt shutdown and remove callbacks to disable the PWM for similar
reasons.

Fixes: 00e7e698bff1 ("backlight: pwm_bl: Configure pwm only once per backlight toggle")
Reported-by: Aisheng Dong <aisheng.dong@nxp.com>
Tested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20231009093223.227286-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl: mpc5200_dma.c: Fix warning of Function parameter or member not described

[ Upstream commit 4a221b2e3340f4a3c2b414c46c846a26c6caf820 ]

This patch fixes the warnings of "Function parameter or member 'xxx'
not described".

>> sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'component' not described in 'psc_dma_trigger'
   sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'substream' not described in 'psc_dma_trigger'
   sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'cmd' not described in 'psc_dma_trigger'

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310061914.jJuekdHs-lkp@intel.com/
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Fixes: 6d1048bc1152 ("ASoC: fsl: mpc5200_dma: remove snd_pcm_ops")
Link: https://lore.kernel.org/r/87il7fcqm8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest: vm: fix mdwe's mmap_FIXED test case

[ Upstream commit a27e2e2d465e4ed73371974040689ac3e78fe3ee ]

I checked with the original author, the mmap_FIXED test case wasn't
properly tested and fails.  Currently, it maps two consecutive (non
overlapping) pages and expects the second mapping to be denied by MDWE but
these two pages have nothing to do with each other so MDWE is actually out
of the picture here.

What the test actually intended to do was to remap a virtual address using
MAP_FIXED.  However, this operation unmaps the existing mapping and
creates a new one so the va is backed by a new page and MDWE is again out
of the picture, all remappings should succeed.

This patch keeps the test case to make it clear that this situation is
expected to work: MDWE shouldn't block a MAP_FIXED replacement.

Link: https://lkml.kernel.org/r/20230828150858.393570-3-revest@chromium.org
Fixes: 4cf1fe34fd18 ("kselftest: vm: add tests for memory-deny-write-execute")
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Ayush Jain <ayush.jain3@amd.com>
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Cc: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: move 'ix' sanity check to corrent position

[ Upstream commit af90a8f4a09ec4a3de20142e37f37205d4687f28 ]

Check 'ix' before it is used.

Fixes: 80e675f906db ("ext4: optimize memmmove lengths in extent/index insertions")
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Link: https://lore.kernel.org/r/20230906013341.7199-1-gouhao@uniontech.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: add missing initialization of call_notify_error in update_super_work()

[ Upstream commit ee6a12d0d4d85f3833d177cd382cd417f0ef011b ]

Fixes: ff0722de896e ("ext4: add periodic superblock update check")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9323/1: mm: Fix ARCH_LOW_ADDRESS_LIMIT when CONFIG_ZONE_DMA

[ Upstream commit 399da29ff5eb3f675c71423bec4cf2208f218576 ]

Configuring VMSPLIT_2G + LPAE on Raspberry Pi 4 leads to SWIOTLB
buffer allocation beyond platform dma_zone_size of SZ_1G, which
results in broken SD card boot.

So fix this be setting ARCH_LOW_ADDRESS_LIMIT in CONFIG_ZONE_DMA
case.

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: e9faf9b0b07a ("ARM: add multi_v7_lpae_defconfig")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9321/1: memset: cast the constant byte to unsigned char

[ Upstream commit c0e824661f443b8cab3897006c1bbc69fd0e7bc4 ]

memset() description in ISO/IEC 9899:1999 (and elsewhere) says:

The memset function copies the value of c (converted to an
unsigned char) into each of the first n characters of the
object pointed to by s.

The kernel's arm32 memset does not cast c to unsigned char. This results
in the following code to produce erroneous output:

char a[128];
memset(a, -128, sizeof(a));

This is because gcc will generally emit the following code before
it calls memset() :

mov   r0, r7
mvn   r1, #127        ; 0x7f
bl    00000000 <memset>

r1 ends up with 0xffffff80 before being used by memset() and the
'a' array will have -128 once in every four bytes while the other
bytes will be set incorrectly to -1 like this (printing the first
8 bytes) :

test_module: -128 -1 -1 -1
test_module: -1 -1 -1 -128

The change here is to 'and' r1 with 255 before it is used.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - fix PF queue parameter issue

[ Upstream commit 5831fc1fd4a578232fea708b82de0c666ed17153 ]

If the queue isolation feature is enabled, the number of queues
supported by the device changes. When PF is enabled using the
current default number of queues, the default number of queues may
be greater than the number supported by the device. As a result,
the PF fails to be bound to the driver.

After modification, if queue isolation feature is enabled, when
the default queue parameter is greater than the number supported
by the device, the number of enabled queues will be changed to
the number supported by the device, so that the PF and driver
can be properly bound.

Fixes: 8bbecfb402f7 ("crypto: hisilicon/qm - add queue isolation support for Kunpeng930")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hid: cp2112: Fix duplicate workqueue initialization

[ Upstream commit e3c2d2d144c082dd71596953193adf9891491f42 ]

Previously the cp2112 driver called INIT_DELAYED_WORK within
cp2112_gpio_irq_startup, resulting in duplicate initilizations of the
workqueue on subsequent IRQ startups following an initial request. This
resulted in a warning in set_work_data in workqueue.c, as well as a rare
NULL dereference within process_one_work in workqueue.c.

Initialize the workqueue within _probe instead.

Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: vmd: Correct PCI Header Type Register's multi-function check

[ Upstream commit 5827e17d0555b566c32044b0632b46f9f95054fa ]

vmd_domain_reset() attempts to find whether the device may contain multiple
functions by checking 0x80 (Multi-Function Device), however, the hdr_type
variable has already been masked with PCI_HEADER_TYPE_MASK so the check can
never true.

To fix the issue, don't mask the read with PCI_HEADER_TYPE_MASK.

Fixes: 6aab5622296b ("PCI: vmd: Clean up domain before enumeration")
Link: https://lore.kernel.org/r/20231003125300.5541-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: ipc4-topology: Use size_add() in call to struct_size()

[ Upstream commit 3746284c233d5cf5f456400e61cd4a46a69c6e8c ]

If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.

Fixes: f9efae954905 ("ASoC: SOF: ipc4-topology: Add support for base config extension")
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZQSr15AYJpDpipg6@work
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - increase size of buffers

[ Upstream commit 4e4e2ed22d505c5bacf65c6a39bfb6d120d24785 ]

Increase the size of the buffers used for composing the names used for
the transport debugfs entries and the vector name to avoid a potential
truncation.

This resolves the following errors when compiling the driver with W=1
and KCFLAGS=-Werror on GCC 12.3.1:

    drivers/crypto/intel/qat/qat_common/adf_transport_debug.c: In function ‘adf_ring_debugfs_add’:
    drivers/crypto/intel/qat/qat_common/adf_transport_debug.c:100:60: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
    drivers/crypto/intel/qat/qat_common/adf_isr.c: In function ‘adf_isr_resource_alloc’:
    drivers/crypto/intel/qat/qat_common/adf_isr.c:197:47: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 5 [-Werror=format-truncation=]

Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam/jr - fix Chacha20 + Poly1305 self test failure

[ Upstream commit a8d3cdcc092fb2f2882acb6c20473a1be0ef4484 ]

key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.

fix this by memcpy the key in caam_ctx key arrary

Fixes: d6bbd4eea243 ("crypto: caam/jr - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam/qi2 - fix Chacha20 + Poly1305 self test failure

[ Upstream commit 7b8c6aee0d5b864e70c0da82583f9862e374eaf3 ]

key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.

fix this by memcpy the key in caam_ctx key arrary

Fixes: c10a53367901 ("crypto: caam/qi2 - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nd_btt: Make BTT lanes preemptible

[ Upstream commit 36c75ce3bd299878fd9b238e9803d3817ddafbf3 ]

nd_region_acquire_lane uses get_cpu, which disables preemption. This is
an issue on PREEMPT_RT kernels, since btt_write_pg and also
nd_region_acquire_lane itself take a spin lock, resulting in BUG:
sleeping function called from invalid context.

Fix the issue by replacing get_cpu with smp_process_id and
migrate_disable when needed. This makes BTT operations preemptible, thus
permitting the use of spin_lock.

BUG example occurring when running ndctl tests on PREEMPT_RT kernel:

BUG: sleeping function called from invalid context at
kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 4903, name:
libndctl
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
[<ffffffffc1313db5>] nd_region_acquire_lane+0x15/0x90 [libnvdimm]
Call Trace:
 <TASK>
 dump_stack_lvl+0x8e/0xb0
 __might_resched+0x19b/0x250
 rt_spin_lock+0x4c/0x100
 ? btt_write_pg+0x2d7/0x500 [nd_btt]
 btt_write_pg+0x2d7/0x500 [nd_btt]
 ? local_clock_noinstr+0x9/0xc0
 btt_submit_bio+0x16d/0x270 [nd_btt]
 __submit_bio+0x48/0x80
 __submit_bio_noacct+0x7e/0x1e0
 submit_bio_wait+0x58/0xb0
 __blkdev_direct_IO_simple+0x107/0x240
 ? inode_set_ctime_current+0x51/0x110
 ? __pfx_submit_bio_wait_endio+0x10/0x10
 blkdev_write_iter+0x1d8/0x290
 vfs_write+0x237/0x330
 ...
 </TASK>

Fixes: 5212e11fde4d ("nd_btt: atomic sector updates")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libnvdimm/of_pmem: Use devm_kstrdup instead of kstrdup and check its return value

[ Upstream commit 6fd4ebfc4d61e3097b595ab2725d513e3bbd6739 ]

Use devm_kstrdup() instead of kstrdup() and check its return value to
avoid memory leak.

Fixes: 49bddc73d15c ("libnvdimm/of_pmem: Provide a unique name for bus provider")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-pcm.c: Make sure DAI parameters cleared if the DAI becomes inactive

[ Upstream commit 3efcb471f871cc095841d411f98c593228ecbac6 ]

The commit 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs parameters after
stream_active is updated") tries to make sure DAI parameters can be
cleared properly through moving the cleanup to the place where stream
active status is updated. However, it will cause the cleanup only
happening in soc_pcm_close().

Suppose a case: aplay -Dhw:0 44100.wav 48000.wav. The case calls
soc_pcm_open()->soc_pcm_hw_params()->soc_pcm_hw_free()->
soc_pcm_hw_params()->soc_pcm_hw_free()->soc_pcm_close() in order. The
parameters would be remained in the system even if the playback of
44100.wav is finished.

The case requires us clearing parameters in phase of soc_pcm_hw_free().
However, moving the DAI parameters cleanup back to soc_pcm_hw_free()
has the risk that DAIs parameters never be cleared if there're more
than one stream, see commit 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs
parameters after stream_active is updated") for more details.

To meet all these requirements, in addition to do DAI parameters
cleanup in soc_pcm_hw_free(), also check it in soc_pcm_close() to make
sure DAI parameters cleared if the DAI becomes inactive.

Fixes: 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20230920153621.711373-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ibmvfc: Fix erroneous use of rtas_busy_delay with hcall return code

[ Upstream commit 670106eb4c8b23475f8c2b3416005a312afa622f ]

Commit 0217a272fe13 ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ
during cleanup") wrongly changed the busy loop check to use
rtas_busy_delay() instead of H_BUSY and H_IS_LONG_BUSY(). The busy return
codes for RTAS and hypercalls are not the same.

Fix this issue by restoring the use of H_BUSY and H_IS_LONG_BUSY().

Fixes: 0217a272fe13 ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ  during cleanup")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-5-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix unregistration of compression algorithms

[ Upstream commit 11af152f784d9eca54e193140891ac52de36e9a9 ]

The function adf_dev_init(), through the subsystem qat_compression,
populates the list of list of compression instances
accel_dev->compression_list. If the list of instances is not empty,
the function adf_dev_start() will then call qat_compression_registers()
register the compression algorithms into the crypto framework.

If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of compression algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_compression.c to get
to a negative value.

Add a new state, ADF_STATUS_COMPRESSION_ALGS_REGISTERED, which tracks
if the compression algorithms are registered into the crypto framework.
Then use this to unregister the algorithms if such flag is set. This
ensures that the compression algorithms are only unregistered if
previously registered.

Fixes: 1198ae56c9a5 ("crypto: qat - expose deflate through acomp api for QAT GEN2")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix unregistration of crypto algorithms

[ Upstream commit 9b2f33a1bfcda90b857431a764c9c8f9a412bbe5 ]

The function adf_dev_init(), through the subsystem qat_crypto, populates
the list of list of crypto instances accel_dev->crypto_list.
If the list of instances is not empty, the function adf_dev_start() will
then call qat_algs_registers() and qat_asym_algs_register() to register
the crypto algorithms into the crypto framework.

If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of crypto algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_algs.c and
qat_asym_algs.c to get to a negative value.

Add a new state, ADF_STATUS_CRYPTO_ALGS_REGISTERED, which tracks if the
crypto algorithms are registered into the crypto framework. Then use
this to unregister the algorithms if such flag is set. This ensures that
the crypto algorithms are only unregistered if previously registered.

Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - ignore subsequent state up commands

[ Upstream commit 9c20cb8b1847dedddec3d5163079290542bf00bf ]

If the device is already in the up state, a subsequent write of `up` to
the sysfs attribute /sys/bus/pci/devices/<BDF>/qat/state brings the
device down.
Fix this behaviour by ignoring subsequent `up` commands if the device is
already in the up state.

Fixes: 1bdc85550a2b ("crypto: qat - fix concurrency issue when device state changes")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix state machines cleanup paths

[ Upstream commit c9ca9756f376f51f985130a0e599d956065d4c44 ]

Commit 1bdc85550a2b ("crypto: qat - fix concurrency issue when device
state changes") introduced the function adf_dev_down() which wraps the
functions adf_dev_stop() and adf_dev_shutdown().
In a subsequent change, the sequence adf_dev_stop() followed by
adf_dev_shutdown() was then replaced across the driver with just a call
to the function adf_dev_down().

The functions adf_dev_stop() and adf_dev_shutdown() are called in error
paths to stop the accelerator and free up resources and can be called
even if the counterparts adf_dev_init() and adf_dev_start() did not
complete successfully.
However, the implementation of adf_dev_down() prevents the stop/shutdown
sequence if the device is found already down.
For example, if adf_dev_init() fails, the device status is not set as
started and therefore a call to adf_dev_down() won't be calling
adf_dev_shutdown() to undo what adf_dev_init() did.

Do not check if a device is started in adf_dev_down() but do the
equivalent check in adf_sysfs.c when handling a DEV_DOWN command from
the user.

Fixes: 2b60f79c7b81 ("crypto: qat - replace state machine calls")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Use size_{add,sub,mul}() in calls to struct_size()

[ Upstream commit 81760bedc65194ff38e1e4faefd5f9f0c95c19a4 ]

If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` provides against potential integer
overflows is defeated. Fix this by hardening calls to `struct_size()`
with `size_add()`, `size_sub()` and `size_mul()`.

Fixes: 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes")
Fixes: a4676388e2e2 ("RDMA/core: Simplify how the gid_attrs sysfs is created")
Fixes: e9dd5daf884c ("IB/umad: Refactor code to use cdev_device_add()")
Fixes: 324e227ea7c9 ("RDMA/device: Add ib_device_get_by_netdev()")
Fixes: 5aad26a7eac5 ("IB/core: Use struct_size() in kzalloc()")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZQdt4NsJFwwOYxUR@work
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: geode - fix accessing registers

[ Upstream commit 464bd8ec2f06707f3773676a1bd2c64832a3c805 ]

When the membase and pci_dev pointer were moved to a new struct in priv,
the actual membase users were left untouched, and they started reading
out arbitrary memory behind the struct instead of registers. This
unfortunately turned the RNG into a constant number generator, depending
on the content of what was at that offset.

To fix this, update geode_rng_data_{read,present}() to also get the
membase via amd_geode_priv, and properly read from the right addresses
again.

Fixes: 9f6ec8dc574e ("hwrng: geode - Fix PCI device refcount leak")
Reported-by: Timur I. Davletshin <timur.davletshin@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217882
Tested-by: Timur I. Davletshin <timur.davletshin@gmail.com>
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: bcm2835 - Fix hwrng throughput regression

[ Upstream commit b58a36008bfa1aadf55f516bcbfae40c779eb54b ]

The last RCU stall fix caused a massive throughput regression of the
hwrng on Raspberry Pi 0 - 3. hwrng_msleep doesn't sleep precisely enough
and usleep_range doesn't allow scheduling. So try to restore the
best possible throughput by introducing hwrng_yield which interruptable
sleeps for one jiffy.

Some performance measurements on Raspberry Pi 3B+ (arm64/defconfig):

sudo dd if=/dev/hwrng of=/dev/null count=1 bs=10000

cpu_relax              ~138025 Bytes / sec
hwrng_msleep(1000)         ~13 Bytes / sec
hwrng_yield              ~2510 Bytes / sec

Fixes: 96cb9d055445 ("hwrng: bcm2835 - use hwrng_msleep() instead of cpu_relax()")
Link: https://lore.kernel.org/linux-arm-kernel/bc97ece5-44a3-4c4e-77da-2db3eb66b128@gmx.net/
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/hpre - Fix a erroneous check after snprintf()

[ Upstream commit c977950146720abff14e46d8c53f5638b06a9182 ]

This error handling looks really strange.
Check if the string has been truncated instead.

Fixes: 02ab994635eb ("crypto: hisilicon - Fixed some tiny bugs of HPRE")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Fix some unfused tests

[ Upstream commit 7b3c2348d314a18f6ed84bab67023ae5d1ec6b1e ]

Some of the tests for unfused parts referenced a named member parameter,
but when the test suite was switched to call a python ctypes library they
weren't updated.  Adjust them to refer to the first argument of the
process_param() call and set the data type of the signature appropriately.

Fixes: 15f8aa7bb3e5 ("crypto: ccp - Add unit tests for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Fix sample application signature passing

[ Upstream commit 2ad01eb5fad24627ab4e196dc54a220753b2238b ]

When parameters are sent the PSP returns back it's own signature
for the application to verify the authenticity of the result.

Display this signature to the caller instead of the one the caller
sent.

Fixes: f40d42f116cf ("crypto: ccp - Add a sample python script for Dynamic Boost Control")
Fixes: febe3ed3222f ("crypto: ccp - Add a sample library for ioctl use")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Fix DBC sample application error handling

[ Upstream commit 70f242c1933e9e881c13c31640bb6d56e8b7e738 ]

The sample application was taking values from ioctl() and treating
those as the error codes to present to a user.

This is incorrect when ret is non-zero, the error is stored to `errno`.
Use this value instead.

Fixes: f40d42f116cf ("crypto: ccp - Add a sample python script for Dynamic Boost Control")
Fixes: febe3ed3222f ("crypto: ccp - Add a sample library for ioctl use")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Fix ioctl unit tests

[ Upstream commit 7f71c3e033824e1da237916a1885e3c0699f86b2 ]

A local environment change was importing ioctl_opt which is required
for ioctl tests to pass.  Add the missing import for it.

Fixes: 15f8aa7bb3e5 ("crypto: ccp - Add unit tests for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - Get a free page to use while fetching initial nonce

[ Upstream commit 53f7f779f45cbe1771bc4ae05f0320e204a18611 ]

dbc_dev_init() gets a free page from `GFP_KERNEL`, but if that page has
any data in it the first nonce request will fail.
This prevents dynamic boost control from probing. To fix this, explicitly
request a zeroed page with `__GFP_ZERO` to ensure first nonce fetch works.

Fixes: c04cf9e14f10 ("crypto: ccp - Add support for fetching a nonce for dynamic boost control")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KEYS: Include linux/errno.h in linux/verification.h

[ Upstream commit 0a596b0682a7ce37e26c36629816f105c6459d06 ]

Add inclusion of linux/errno.h as otherwise the reference to EINVAL
may be invalid.

Fixes: f3cf4134c5c6 ("bpf: Add bpf_lookup_*_key() and bpf_key_put() kfuncs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308261414.HKw1Mrip-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: cs35l41: Undo runtime PM changes at driver exit time

[ Upstream commit 85a1bf86fac0c195929768b4e92c78cad107523b ]

According to the documentation, drivers are responsible for undoing at
removal time all runtime PM changes done during probing.

Hence, add the missing calls to pm_runtime_dont_use_autosuspend(), which
are necessary for undoing pm_runtime_use_autosuspend().

Fixes: 1873ebd30cc8 ("ALSA: hda: cs35l41: Support Hibernation during Suspend")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-11-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: cs35l41: Fix unbalanced pm_runtime_get()

[ Upstream commit 486465508f8a5fe441939a7d97607f4460a60891 ]

If component_add() fails, probe() returns without calling
pm_runtime_put(), which leaves the runtime PM usage counter incremented.

Fix the issue by jumping to err_pm label and drop the now unnecessary
pm_runtime_disable() call.

Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-10-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Undo runtime PM changes at driver exit time

[ Upstream commit 2d5661e6008ae1a1cd6df7cc844908fb8b982c58 ]

According to the documentation, drivers are responsible for undoing at
removal time all runtime PM changes done during probing.

Hence, add the missing calls to pm_runtime_dont_use_autosuspend(), which
are necessary for undoing pm_runtime_use_autosuspend().

Note this would have been handled implicitly by
devm_pm_runtime_enable(), but there is a need to continue using
pm_runtime_enable()/pm_runtime_disable() in order to ensure the runtime
PM is disabled as soon as the remove() callback is entered.

Fixes: f517ba4924ad ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-7-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Verify PM runtime resume errors in IRQ handler

[ Upstream commit 9f8948db9849d202dee3570507d3a0642f92d632 ]

The interrupt handler invokes pm_runtime_get_sync() without checking the
returned error code.

Add a proper verification and switch to pm_runtime_resume_and_get(), to
avoid the need to call pm_runtime_put_noidle() for decrementing the PM
usage counter before returning from the error condition.

Fixes: f517ba4924ad ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-6-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Fix broken shared boost activation

[ Upstream commit 77bf613f0bf08c021309cdb5f84b5f630b829261 ]

Enabling the active/passive shared boosts requires setting SYNC_EN, but
*not* before receiving the PLL Lock signal.

Due to improper error handling, it was not obvious that waiting for the
completion operation times out and, consequently, the shared boost is
never activated.

Further investigations revealed the signal is triggered while
snd_pcm_start() is executed, right after receiving the
SNDRV_PCM_TRIGGER_START command, which happens long after the
SND_SOC_DAPM_PRE_PMU event handler is invoked as part of
snd_pcm_prepare().  That is where cs35l41_global_enable() is called
from.

Increasing the wait duration doesn't help, as it only causes an
unnecessary delay in the invocation of snd_pcm_start().  Moving the wait
and the subsequent regmap operations to the SNDRV_PCM_TRIGGER_START
callback is not a solution either, since they would be executed in an
IRQ-off atomic context.

Solve the issue by setting the SYNC_EN bit in PWR_CTRL3 register right
after receiving the PLL Lock interrupt.

Additionally, drop the unnecessary writes to PWR_CTRL1 register, part of
the original mdsync_up_seq, which would have toggled GLOBAL_EN with
unwanted consequences on PLL locking behavior.

Fixes: f5030564938b ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Initialize completion object before requesting IRQ

[ Upstream commit 5ad668a9ce83d819701fb7abc1c2236049ec15c2 ]

Technically, an interrupt handler can be called before probe() finishes
its execution, hence ensure the pll_lock completion object is always
initialized before being accessed in cs35l41_irq().

Fixes: f5030564938b ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-4-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Handle mdsync_up reg write errors

[ Upstream commit 4bb5870ab60abca6ad18196090831b5e4cf82d93 ]

The return code of regmap_multi_reg_write() call related to "MDSYNC up"
sequence is shadowed by the subsequent regmap_read_poll_timeout()
invocation, which will hit a timeout in case the write operation above
fails.

Make sure cs35l41_global_enable() returns the correct error code instead
of -ETIMEDOUT.

Additionally, to be able to distinguish between the timeouts of
wait_for_completion_timeout() and regmap_read_poll_timeout(), print an
error message for the former and return immediately.  This also avoids
having to wait unnecessarily for the second time.

Fixes: f8264c759208 ("ALSA: cs35l41: Poll for Power Up/Down rather than waiting a fixed delay")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l41: Handle mdsync_down reg write errors

[ Upstream commit a9a3f54a23d844971c274f352500dddeadb4412c ]

The return code of regmap_multi_reg_write() call related to "MDSYNC
down" sequence is shadowed by the subsequent
wait_for_completion_timeout() invocation, which is expected to time
timeout in case the write operation failed.

Let cs35l41_global_enable() return the correct error code instead of
-ETIMEDOUT.

Fixes: f5030564938b ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

module/decompress: use vmalloc() for gzip decompression workspace

[ Upstream commit 3737df782c740b944912ed93420c57344b1cf864 ]

Use a similar approach as commit a419beac4a07 ("module/decompress: use
vmalloc() for zstd decompression workspace") and replace kmalloc() with
vmalloc() also for the gzip module decompression workspace.

In this case the workspace is represented by struct inflate_workspace
that can be fairly large for kmalloc() and it can potentially lead to
allocation errors on certain systems:

$ pahole inflate_workspace
struct inflate_workspace {
struct inflate_state       inflate_state;        /*     0  9544 */
/* --- cacheline 149 boundary (9536 bytes) was 8 bytes ago --- */
unsigned char              working_window[32768]; /*  9544 32768 */

/* size: 42312, cachelines: 662, members: 2 */
/* last cacheline: 8 bytes */
};

Considering that there is no need to use continuous physical memory,
simply switch to vmalloc() to provide a more reliable in-kernel module
decompression.

Fixes: b1ae6dc41eaa ("module: add in-kernel support for decompressing")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommufd: Add iopt_area_alloc()

[ Upstream commit 361d744ddd61de065fbeb042aaed590d32dd92ec ]

We never initialize the two interval tree nodes, and zero fill is not the
same as RB_CLEAR_NODE. This can hide issues where we missed adding the
area to the trees. Factor out the allocation and clear the two nodes.

Fixes: 51fe6141f0f6 ("iommufd: Data structure to provide IOVA to PFN mapping")
Link: https://lore.kernel.org/r/20231030145035.GG691768@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports

[ Upstream commit 473baeab929444295b0530f8766e4becb6a08973 ]

When redescribing ports I assumed that missing "label" (like "cpu")
means switch port isn't used. That was incorrect and I realized my
change made Linux always use the first (5) CPU port (there are 3 of
them).

While above should technically be possible it often isn't correct:
1. Non-default switch ports are often connected to Ethernet interfaces
   not fully covered by vendor setup (they may miss MACs)
2. On some devices non-default ports require specifying fixed link

This fixes network connectivity for some devices. It was reported &
tested for Netgear R8000. It also affects Linksys EA9200 with its
downstream DTS.

Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: pmic_glink: fix connector type to be DisplayPort

[ Upstream commit f86955f2b1ff9fbc7ae4f6595112b2f896885366 ]

As it was pointed out by Simon Ser, the DRM_MODE_CONNECTOR_USB connector
is reserved for the GUD devices. Other drivers (i915, amdgpu) use
DRM_MODE_CONNECTOR_DisplayPort even if the DP stream is handled by the
USB-C altmode. While we are still working on implementing the proper way
to let userspace know that the DP is wrapped into USB-C, change
connector type to be DRM_MODE_CONNECTOR_DisplayPort.

Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support")
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://lore.kernel.org/r/20231010225229.77027-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/resctrl: Ensure the benchmark commands fits to its array

[ Upstream commit 4a28c7665c2a1ac0400864eabb0c641e135f61aa ]

Benchmark command is copied into an array in the stack. The array is
BENCHMARK_ARGS items long but the command line could try to provide a
longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63
bytes of space after fitting the terminating \0 character) and user
could have inputted argument longer than that.

Return error in case the benchmark command does not fit to the space
allocated for it.

Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/pidfd: Fix ksft print formats

[ Upstream commit 4d7f4e8158b62f63031510cdc24acc520956c091 ]

Compiling pidfd selftest after adding a __printf() attribute to
ksft_print_msg() and ksft_test_result_pass() exposes -Wformat warnings
in error_report(), test_pidfd_poll_exec_thread(),
child_poll_exec_test(), test_pidfd_poll_leader_exit_thread(),
child_poll_leader_exit_test().

The ksft_test_result_pass() in error_report() expects a string but
doesn't provide any argument after the format string. All the other
calls to ksft_print_msg() in the functions mentioned above have format
strings that don't match with other passed arguments.

Fix format specifiers so they match the passed variables.

Add a missing variable to ksft_test_result_pass() inside
error_report() so it matches other cases in the switch statement.

Fixes: 2def297ec7fb ("pidfd: add tests for NSpid info in fdinfo")

Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Use correct interrupts for Tegra234 TKE

[ Upstream commit c0b80988eb78d6423249ab530bfbc6b238790a26 ]

The shared interrupts 0-9 of the TKE are mapped to interrupts 0-9, but
shared interrupts 10-15 are mapped to 256-261. Correct the mapping for
the final 6 interrupts. This prevents the TKE from requesting the RTC
interrupt (along with several GTE and watchdog interrupts).

Reported-by: Shubhi Garg <shgarg@nvidia.com>
Fixes: 28d860ed02c2 ("arm64: tegra: Enable native timers on Tegra234")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: tegra: Set BPMP msg flags to reset IPC channels

[ Upstream commit f344675a34383ae26a8230f4b1cd99cbd0defebd ]

Set the 'TEGRA_BPMP_MESSAGE_RESET' bit in newly added 'flags' field
of 'struct tegra_bpmp_message' to request for the reset of BPMP IPC
channels. This is used along with the 'suspended' check in BPMP driver
for handling early bandwidth requests due to the hotplug of CPU's
during system resume before the driver gets resumed.

Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
Co-developed-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: tegra: Add suspend hook and reset BPMP IPC early on resume

[ Upstream commit ea608a01d4ee66f8b51070e623f9adb8684c0dd4 ]

Add suspend hook and a 'suspended' field in the 'struct tegra_bpmp'
to mark if BPMP is suspended. Also, add a 'flags' field in the
'struct tegra_bpmp_message' whose 'TEGRA_BPMP_MESSAGE_RESET' bit can be
set from the Tegra MC driver to signal that the reset of BPMP IPC
channels is required before sending MRQ to the BPMP FW. Together both
the fields allow us to handle any requests that might be sent too soon
as they can cause hang during system resume.

One case where we see BPMP requests being sent before the BPMP driver
has resumed is the memory bandwidth requests which are triggered by
onlining the CPUs during system resume. The CPUs are onlined before the
BPMP has resumed and we need to reset the BPMP IPC channels to handle
these requests.

The additional check for 'flags' is done to avoid any un-intended BPMP
IPC reset if the tegra_bpmp_transfer*() API gets called during suspend
sequence after the BPMP driver is suspended.

Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
Co-developed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix P3767 QSPI speed

[ Upstream commit 57ea99ba176913c325fc8324a24a1b5e8a6cf520 ]

The QSPI device used on Jetson Orin NX and Nano modules (p3767) is
the same as Jetson AGX Orin (p3701) and should have a maximum speed of
102 MHz.

Fixes: 13b0aca303e9 ("arm64: tegra: Support Jetson Orin NX")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix P3767 card detect polarity

[ Upstream commit c6b7a1d11d0fa6333078141251908f48042016e1 ]

The SD card detect pin is active-low on all Orin Nano and NX SKUs that
have an SD card slot.

Fixes: 13b0aca303e9 ("arm64: tegra: Support Jetson Orin NX")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mn: Add sound-dai-cells to micfil node

[ Upstream commit db1925454a2e7cadcac8756442ca7c3198332336 ]

Per the DT bindings, the micfil node should have a sound-dai-cells
entry.

Fixes: cca69ef6eba5 ("arm64: dts: imx8mn: Add support for micfil")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mm: Add sound-dai-cells to micfil node

[ Upstream commit 0e6cc2b8bb7d67733f4a47720787eff1ce2666f2 ]

Per the DT bindings, the micfil node should have a sound-dai-cells
entry.

Fixes: 3bd0788c43d9 ("arm64: dts: imx8mm: Add support for micfil")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mp-debix-model-a: Remove USB hub reset-gpios

[ Upstream commit 0ce9a2c121e3ab354cf66aeecd3ed0758f3c5067 ]

The SAI2_TXC pin is left unconnected per the imx8mp-debix-model-a
schematics:

https://debix.io/Uploads/Temp/file/20230331/DEBIX%20Model%20A%20Schematics.pdf

Also, the RTS5411E USB hub chip does not have a reset pin.

Remove this pin description to properly describe the hardware.

This also fixes the following schema warning:

hub@1: 'reset-gpios' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/usb/realtek,rts5411.yaml#

Fixes: 0253e1cb6300 ("arm64: dts: imx8mp-debix: add USB host support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8qm-ss-img: Fix jpegenc compatible entry

[ Upstream commit 1d33cd614d89b0ec024d25ec45acf4632211b5a7 ]

The first compatible entry for the jpegenc should be 'nxp,imx8qm-jpgenc'.

Change it accordingly to fix the following schema warning:

imx8qm-apalis-eval.dtb: jpegenc@58450000: compatible: 'oneOf' conditional failed, one must be fixed:
'nxp,imx8qm-jpgdec' is not one of ['nxp,imx8qxp-jpgdec', 'nxp,imx8qxp-jpgenc']
'nxp,imx8qm-jpgenc' was expected
'nxp,imx8qxp-jpgdec' was expected

Fixes: 5bb279171afc ("arm64: dts: imx8: Add jpeg encoder/decoder nodes")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped

[ Upstream commit 3537a75e73f3420614a358d0c8b390ea483cc87d ]

Add the missing devm_kfree() when we skip the clocks with invalid or
missing information from the firmware.

Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Fixes: 6d6a1d82eaef ("clk: add support for clocks provided by SCMI")
Link: https://lore.kernel.org/r/20231004193600.66232-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: am3517-evm: Fix LED3/4 pinmux

[ Upstream commit 2ab6b437c65233f06bdd2988fd5913baeca5f159 ]

The pinmux for LED3 and LED4 are incorrectly attached to the
omap3_pmx_core when they should be connected to the omap3_pmx_wkup
pin mux.  This was likely masked by the fact that the bootloader
used to do all the pinmuxing.

Fixes: 0dbf99542caf ("ARM: dts: am3517-evm: Add User LEDs and Pushbutton")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-ID: <20231005000402.50879-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_ffa: Allow the FF-A drivers to use 32bit mode of messaging

[ Upstream commit 2d698e8b4fd22374dac0a2d5150ab24d57a222ab ]

An FF-A ABI could support both the SMC32 and SMC64 conventions.
A callee that runs in the AArch64 execution state and implements such
an ABI must implement both SMC32 and SMC64 conventions of the ABI.

So the FF-A drivers will need the option to choose the mode irrespective
of FF-A version and the partition execution mode flag in the partition
information.

Let us remove the check on the FF-A version for allowing the selection
of 32bit mode of messaging. The driver will continue to set the 32-bit
mode if the partition execution mode flag specified that the partition
supports only 32-bit execution.

Fixes: 106b11b1ccd5 ("firmware: arm_ffa: Set up 32bit execution mode flag using partiion property")
Link: https://lore.kernel.org/r/20231005142823.278121-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_ffa: Assign the missing IDR allocation ID to the FFA device

[ Upstream commit 7d0bc6360f17ea323ab25939a34857123d7d87e5 ]

Commit 19b8766459c4 ("firmware: arm_ffa: Fix FFA device names for logical
partitions") added an ID to the FFA device using ida_alloc() and append
the same to "arm-ffa" to make up a unique device name. However it missed
to stash the id value in ffa_dev to help freeing the ID later when the
device is destroyed.

Due to the missing/unassigned ID in FFA device, we get the following
warning when the FF-A device is unregistered.

  |   ida_free called for id=0 which is not allocated.
  |   WARNING: CPU: 7 PID: 1 at lib/idr.c:525 ida_free+0x114/0x164
  |   CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc4 #209
  |   pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
  |   pc : ida_free+0x114/0x164
  |   lr : ida_free+0x114/0x164
  |   Call trace:
  |    ida_free+0x114/0x164
  |    ffa_release_device+0x24/0x3c
  |    device_release+0x34/0x8c
  |    kobject_put+0x94/0xf8
  |    put_device+0x18/0x24
  |    klist_devices_put+0x14/0x20
  |    klist_next+0xc8/0x114
  |    bus_for_each_dev+0xd8/0x144
  |    arm_ffa_bus_exit+0x30/0x54
  |    ffa_init+0x68/0x330
  |    do_one_initcall+0xdc/0x250
  |    do_initcall_level+0x8c/0xac
  |    do_initcalls+0x54/0x94
  |    do_basic_setup+0x1c/0x28
  |    kernel_init_freeable+0x104/0x170
  |    kernel_init+0x20/0x1a0
  |    ret_from_fork+0x10/0x20

Fix the same by actually assigning the ID in the FFA device this time
for real.

Fixes: 19b8766459c4 ("firmware: arm_ffa: Fix FFA device names for logical partitions")
Link: https://lore.kernel.org/r/20231003085932.3553985-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: Fix HDMI Audio overlay in Makefile

[ Upstream commit 69c570ebc3964534c19dc4438d3b96f55d489fc3 ]

Apply HDMI audio overlay to AM625 and AM62-LP SK-EVMs DT binaries,
instead of leaving it in a floating state.

Fixes: b50ccab9e07c ("arm64: dts: ti: am62x-sk: Add overlay for HDMI audio")
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231003092259.28103-1-a-bhatia1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-am62a7-sk: Drop i2c-1 to 100Khz

[ Upstream commit 63e5aa69b821472a3203a29e17c025329c1b151f ]

The TLV320AIC3106 audio codec is interfaced on the i2c-1 bus. With the
default rate of 400Khz the i2c register writes fail to sync:

[   36.026387] tlv320aic3x 1-001b: Unable to sync registers 0x16-0x16. -110
[   38.101130] omap_i2c 20010000.i2c: controller timed out

Dropping the rate to 100Khz fixes the issue.

Fixes: 38c4a08c820c ("arm64: dts: ti: Add support for AM62A7-SK")
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231003-mcasp_am62a-v3-3-2b631ff319ca@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-am625-beagleplay: Fix typo in ramoops reg

[ Upstream commit 33269ac0b768b07da017df173d52952625c57870 ]

Seems like the address value of the reg property was mistyped.
Update reg to 0x9ca00000 to match node's definition.

Fixes: f5a731f0787f ("arm64: dts: ti: Add k3-am625-beagleplay")
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230925151444.1856852-1-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: verdin-am62: disable MIPI DSI bridge

[ Upstream commit 664e2852aa9142193c2e241327631f032b966742 ]

Keep the DPI to MIPI-DSI bridge disabled in the SoM dtsi file.

The display chain is not wholly described in the device tree file, on
Verdin product family the displays are additional accessories that are
configured/enabled using DT overlays.

With this enabled we have issues when a display is enabled on
TIDSS port1 (LVDS) and port0 (DSI) is not used.

Fixes: 9e77200356ba ("arm64: dts: ti: verdin-am62: Add DSI display support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230922123003.25002-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721s2-evm-gesi: Specify base dtb for overlay file

[ Upstream commit 35be6ac964450687ab39b846d65ee1cb2a352280 ]

Specify the base dtb file k3-j721s2-common-proc-board.dtb on which the
k3-j721s2-evm-gesi-exp-board.dtbo overlay has to be applied. Name the
resulting dtb as k3-j721s2-evm.dtb.

Fixes: cac04e27f093 ("arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI")
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20230912043308.20629-1-s-vadapalli@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: ti_sci: Mark driver as non removable

[ Upstream commit 7b7a224b1ba1703583b25a3641ad9798f34d832a ]

The TI-SCI message protocol provides a way to communicate between
various compute processors with a central system controller entity. It
provides the fundamental device management capability and clock control
in the SOCs that it's used in.

The remove function failed to do all the necessary cleanup if
there are registered users. Some things are freed however which
likely results in an oops later on.

Ensure that the driver isn't unbound by suppressing its bind and unbind
sysfs attributes. As the driver is built-in there is no way to remove
device once bound.

We can also remove the ti_sci_remove call along with the
ti_sci_debugfs_destroy as there are no callers for it any longer.

Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: https://lore.kernel.org/linux-arm-kernel/20230216083908.mvmydic5lpi3ogo7@pengutronix.de/
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230921091025.133130-1-d-gole@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: stm32f7-pinctrl: don't use multiple blank lines

[ Upstream commit 88bb50edb61068c4416df2e55677fb3159f647f1 ]

The patch fixes the following warning:

arch/arm/dts/stm32f7-pinctrl.dtsi:380: check: Please don't use multiple blank lines

Fixes: ba287d1a0137 ("ARM: dts: stm32: add pin map for LTDC on stm32f7")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: test: Fix the possible memory leak in executor_test

[ Upstream commit 8040345fdae4cb256c5d981f91ae0f22bea8adcc ]

When CONFIG_KUNIT_ALL_TESTS=y, making CONFIG_DEBUG_KMEMLEAK=y and
CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected.

If kunit_filter_suites() succeeds, not only copy but also filtered_suite
and filtered_suite->test_cases should be freed.

So as Rae suggested, to avoid the suite set never be freed when
KUNIT_ASSERT_EQ() fails and exits after kunit_filter_suites() succeeds,
update kfree_at_end() func to free_suite_set_at_end() to use
kunit_free_suite_set() to free them as kunit_module_exit() and
kunit_run_all_tests() do it. As the second arg got of
free_suite_set_at_end() is a local variable, copy it for free to avoid
wild-memory-access. After applying this patch, the following memory leak
is never detected.

unreferenced object 0xffff8881001de400 (size 1024):
  comm "kunit_try_catch", pid 1396, jiffies 4294720452 (age 932.801s)
  hex dump (first 32 bytes):
    73 75 69 74 65 32 00 00 00 00 00 00 00 00 00 00  suite2..........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817db753>] __kmalloc_node_track_caller+0x53/0x150
    [<ffffffff817bd242>] kmemdup+0x22/0x50
    [<ffffffff829e961d>] kunit_filter_suites+0x44d/0xcc0
    [<ffffffff829eb69f>] filter_suites_test+0x12f/0x360
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881052cd388 (size 192):
  comm "kunit_try_catch", pid 1396, jiffies 4294720452 (age 932.801s)
  hex dump (first 32 bytes):
    a0 85 9e 82 ff ff ff ff 80 cd 7c 84 ff ff ff ff  ..........|.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817dbad2>] __kmalloc+0x52/0x150
    [<ffffffff829e9651>] kunit_filter_suites+0x481/0xcc0
    [<ffffffff829eb69f>] filter_suites_test+0x12f/0x360
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20

unreferenced object 0xffff888100da8400 (size 1024):
  comm "kunit_try_catch", pid 1398, jiffies 4294720454 (age 781.945s)
  hex dump (first 32 bytes):
    73 75 69 74 65 32 00 00 00 00 00 00 00 00 00 00  suite2..........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817db753>] __kmalloc_node_track_caller+0x53/0x150
    [<ffffffff817bd242>] kmemdup+0x22/0x50
    [<ffffffff829e961d>] kunit_filter_suites+0x44d/0xcc0
    [<ffffffff829eb13f>] filter_suites_test_glob_test+0x12f/0x560
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888105117878 (size 96):
  comm "kunit_try_catch", pid 1398, jiffies 4294720454 (age 781.945s)
  hex dump (first 32 bytes):
    a0 85 9e 82 ff ff ff ff a0 ac 7c 84 ff ff ff ff  ..........|.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817dbad2>] __kmalloc+0x52/0x150
    [<ffffffff829e9651>] kunit_filter_suites+0x481/0xcc0
    [<ffffffff829eb13f>] filter_suites_test_glob_test+0x12f/0x560
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888102c31c00 (size 1024):
  comm "kunit_try_catch", pid 1404, jiffies 4294720460 (age 781.948s)
  hex dump (first 32 bytes):
    6e 6f 72 6d 61 6c 5f 73 75 69 74 65 00 00 00 00  normal_suite....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817db753>] __kmalloc_node_track_caller+0x53/0x150
    [<ffffffff817bd242>] kmemdup+0x22/0x50
    [<ffffffff829ecf17>] kunit_filter_attr_tests+0xf7/0x860
    [<ffffffff829e99ff>] kunit_filter_suites+0x82f/0xcc0
    [<ffffffff829ea975>] filter_attr_test+0x195/0x5f0
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881052cd250 (size 192):
  comm "kunit_try_catch", pid 1404, jiffies 4294720460 (age 781.948s)
  hex dump (first 32 bytes):
    a0 85 9e 82 ff ff ff ff 00 a9 7c 84 ff ff ff ff  ..........|.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817dbad2>] __kmalloc+0x52/0x150
    [<ffffffff829ecfc1>] kunit_filter_attr_tests+0x1a1/0x860
    [<ffffffff829e99ff>] kunit_filter_suites+0x82f/0xcc0
    [<ffffffff829ea975>] filter_attr_test+0x195/0x5f0
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888104f4e400 (size 1024):
  comm "kunit_try_catch", pid 1408, jiffies 4294720464 (age 781.944s)
  hex dump (first 32 bytes):
    73 75 69 74 65 00 00 00 00 00 00 00 00 00 00 00  suite...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff817db753>] __kmalloc_node_track_caller+0x53/0x150
    [<ffffffff817bd242>] kmemdup+0x22/0x50
    [<ffffffff829ecf17>] kunit_filter_attr_tests+0xf7/0x860
    [<ffffffff829e99ff>] kunit_filter_suites+0x82f/0xcc0
    [<ffffffff829e9fc3>] filter_attr_skip_test+0x133/0x6e0
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff8881052cc620 (size 192):
  comm "kunit_try_catch", pid 1408, jiffies 4294720464 (age 781.944s)
  hex dump (first 32 bytes):
    a0 85 9e 82 ff ff ff ff c0 a8 7c 84 ff ff ff ff  ..........|.....
    00 00 00 00 00 00 00 00 02 00 00 00 02 00 00 00  ................
  backtrace:
    [<ffffffff817dbad2>] __kmalloc+0x52/0x150
    [<ffffffff829ecfc1>] kunit_filter_attr_tests+0x1a1/0x860
    [<ffffffff829e99ff>] kunit_filter_suites+0x82f/0xcc0
    [<ffffffff829e9fc3>] filter_attr_skip_test+0x133/0x6e0
    [<ffffffff829e802a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
    [<ffffffff81236fc6>] kthread+0x2b6/0x380
    [<ffffffff81096afd>] ret_from_fork+0x2d/0x70
    [<ffffffff81003511>] ret_from_fork_asm+0x11/0x20

Fixes: e5857d396f35 ("kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites")
Fixes: 76066f93f1df ("kunit: add tests for filtering attributes")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Suggested-by: David Gow <davidgow@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309142251.uJ8saAZv-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202309270433.wGmFRGjd-lkp@intel.com/
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: Fix possible memory leak in kunit_filter_suites()

[ Upstream commit 24de14c98b37ea40a7e493dfd0d93b400b6efbca ]

If the outer layer for loop is iterated more than once and it fails not
in the first iteration, the filtered_suite and filtered_suite->test_cases
allocated in the last kunit_filter_attr_tests() in last inner for loop
is leaked.

So add a new free_filtered_suite err label and free the filtered_suite
and filtered_suite->test_cases so far. And change kmalloc_array of copy
to kcalloc to Clear the copy to make the kfree safe.

Fixes: 529534e8cba3 ("kunit: Add ability to filter attributes")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: Fix the wrong kfree of copy for kunit_filter_suites()

[ Upstream commit e44679515a7b803cf0143dc9de3d2ecbe907f939 ]

If the outer layer for loop is iterated more than once and it fails not
in the first iteration, the copy pointer has been moved. So it should free
the original copy's backup copy_start.

Fixes: abbf73816b6f ("kunit: fix possible memory leak in kunit_filter_suites()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: Fix missed memory release in kunit_free_suite_set()

[ Upstream commit a6074cf0126b0bee51ab77a15930dc24a4d5db90 ]

modprobe cpumask_kunit and rmmod cpumask_kunit, kmemleak detect
a suspected memory leak as below.

If kunit_filter_suites() in kunit_module_init() succeeds, the
suite_set.start will not be NULL and the kunit_free_suite_set() in
kunit_module_exit() should free all the memory which has not
been freed. However the test_cases in suites is left out.

unreferenced object 0xffff54ac47e83200 (size 512):
  comm "modprobe", pid 592, jiffies 4294913238 (age 1367.612s)
  hex dump (first 32 bytes):
    84 13 1a f0 d3 b6 ff ff 30 68 1a f0 d3 b6 ff ff  ........0h......
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000008dec63a2>] slab_post_alloc_hook+0xb8/0x368
    [<00000000ec280d8e>] __kmem_cache_alloc_node+0x174/0x290
    [<00000000896c7740>] __kmalloc+0x60/0x2c0
    [<000000007a50fa06>] kunit_filter_suites+0x254/0x5b8
    [<0000000078cc98e2>] kunit_module_notify+0xf4/0x240
    [<0000000033cea952>] notifier_call_chain+0x98/0x17c
    [<00000000973d05cc>] notifier_call_chain_robust+0x4c/0xa4
    [<000000005f95895f>] blocking_notifier_call_chain_robust+0x4c/0x74
    [<0000000048e36fa7>] load_module+0x1a2c/0x1c40
    [<0000000004eb8a91>] init_module_from_file+0x94/0xcc
    [<0000000037dbba28>] idempotent_init_module+0x184/0x278
    [<00000000161b75cb>] __arm64_sys_finit_module+0x68/0xa8
    [<000000006dc1669b>] invoke_syscall+0x44/0x100
    [<00000000fa87e304>] el0_svc_common.constprop.1+0x68/0xe0
    [<000000009d8ad866>] do_el0_svc+0x1c/0x28
    [<000000005b83c607>] el0_svc+0x3c/0xc4

Fixes: a127b154a8f2 ("kunit: tool: allow filtering test cases via glob")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: llcc: Handle a second device without data corruption

[ Upstream commit f1a1bc8775b26345aba2be278118999e7f661d3d ]

Usually there is only one llcc device. But if there were a second, even
a failed probe call would modify the global drv_data pointer. So check
if drv_data is valid before overwriting it.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver")
Link: https://lore.kernel.org/r/20230926083229.2073890-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: mdm9615: populate vsdcc fixed regulator

[ Upstream commit 09f8ee81b6da5f76de8b83c8bfc4475b54e101e0 ]

Fixed regulator put under "regulators" node will not be populated,
unless simple-bus or something similar is used.  Drop the "regulators"
wrapper node to fix this.

Fixes: 2c5e596524e7 ("ARM: dts: Add MDM9615 dtsi")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230924183914.51414-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: apq8026-samsung-matisse-wifi: Fix inverted hall sensor

[ Upstream commit 0b73519790d29e4bc71afc4882a9aa9ea649bcf7 ]

Fix hall sensor GPIO polarity and also allow disabling the sensor.
Remove unneeded interrupt.

Fixes: f15623bda1dc ("ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 (SM-T530)")
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230922011211.115234-1-matti.lehtimaki@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulators

[ Upstream commit 33e9032a1875bb1aee3c68a4540f5a577ff44130 ]

Add the missing regulator supplies to the ADV7533 HDMI bridge to fix
the following dtbs_check warnings. They are all also supplied by
pm8916_l6 so there is no functional difference.

apq8016-sbc.dtb: bridge@39: 'dvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'pvdd-supply' is a required property
apq8016-sbc.dtb: bridge@39: 'a2vdd-supply' is a required property
        from schema display/bridge/adi,adv7533.yaml

Fixes: 28546b095511 ("arm64: dts: apq8016-sbc: Add HDMI display support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230922-db410c-adv7533-regulators-v1-1-68aba71e529b@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: dts: allwinner: remove address-cells from intc node

[ Upstream commit 267860b10c67dd396c73a9e6e8103670d78a4c01 ]

A recent submission [1] from Rob has added additionalProperties: false
to the interrupt-controller child node of RISC-V cpus, highlighting that
the D1 DT has been incorrectly using #address-cells since its
introduction. It has no child nodes, so #address-cells is not needed.
Remove it.

Fixes: 077e5f4f5528 ("riscv: dts: allwinner: Add the D1/D1s SoC devicetree")
Link: https://patchwork.kernel.org/project/linux-riscv/patch/20230915201946.4184468-1-robh@kernel.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230916-saddling-dastardly-8cf6d1263c24@spud
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8939: Fix iommu local address range

[ Upstream commit d40291e52d5ac4d0ff18ca433e84e6ddccc13427 ]

Fix the apps iommu local address space range as per data sheet.

Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230917140039.25283-1-quic_gkohli@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8976: Fix ipc bit shifts

[ Upstream commit 684277525c70f329300cc687e27248e405a4ff9e ]

Update bits to match downstream irq-bitmask values.

Fixes: 0484d3ce0902 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Link: https://lore.kernel.org/r/20230812112534.8610-8-a39.skl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM64: dts: marvell: cn9310: Use appropriate label for spi1 pins

[ Upstream commit 0878fd86f554ab98aa493996c7e0c72dff58437f ]

Both the CN9130-CRB and CN9130-DB use the SPI1 interface but had the
pinctrl node labelled as "cp0_spi0_pins". Use the label "cp0_spi1_pins"
and update the node name to "cp0-spi-pins-1" to avoid confusion with the
pinctrl options for SPI0.

Fixes: 4c43a41e5b8c ("arm64: dts: cn913x: add device trees for topology B boards")
Fixes: 5c0ee54723f3 ("arm64: dts: add support for Marvell cn9130-crb platform")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdx75-idp: align RPMh regulator nodes with bindings

[ Upstream commit 815ea491460766dbd4b39a3c9904b44b5880c41c ]

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes:

  sdx75-idp.dtb: rsc@17a00000: 'pmx75-rpmh-regulators' does not match any of the regexes: '^regulators(-[0-9])?$', 'pinctrl-[0-9]+'

Fixes: 8a2dc39d1043 ("arm64: dts: qcom: sdx75-idp: Add regulator nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905163103.257412-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>