mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky

[ Upstream commit 64254a2054611205798e6bde634639bc704573ac ]

The driver currently treats static FDB entries as both static and
sticky. This is incorrect and prevents such entries from being roamed to
a different port via learning.

Fix this by configuring static entries with ageing disabled and roaming
enabled.

In net-next we can add proper support for the newly introduced 'sticky'
flag.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: Mark FDB entries that were added by user as such

[ Upstream commit 710ae72877378e7cde611efd30fe90502a6e5b30 ]

Externally learned entries can be added by a user or by a switch driver
that is notifying the bridge driver about entries that were learned in
hardware.

In the first case, the entries are not marked with the 'added_by_user'
flag, which causes switch drivers to ignore them and not offload them.

The 'added_by_user' flag can be set on externally learned FDB entries
based on the 'swdev_notify' parameter in br_fdb_external_learn_add(),
which effectively means if the created / updated FDB entry was added by
a user or not.

Fixes: 816a3bed9549 ("switchdev: Add fdb.added_by_user to switchdev notifications")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: pci: Return error on PCI reset timeout

[ Upstream commit 67c14cc9b35055264fc0efed00159a7de1819f1b ]

Return an appropriate error in the case when the driver timeouts on waiting
for firmware to go out of PCI reset.

Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dpaa_eth: NETIF_F_LLTX requires to do our own update of trans_start

[ Upstream commit c6ddfb9a963f0cac0f7365acfc87f3f3b33a3b69 ]

As txq_trans_update() only updates trans_start when the lock is held,
trans_start does not get updated if NETIF_F_LLTX is declared.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: bpf_setsockopt: reset sock dst on SO_MARK changes

[ Upstream commit f4924f24da8c7ef64195096817f3cde324091d97 ]

In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used
to change sk_mark, sk_dst_reset(sk) is called. The same should be
done in bpf_setsockopt().

Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: lp5523: fix a missing check of return value of lp55xx_read

[ Upstream commit 248b57015f35c94d4eae2fdd8c6febf5cd703900 ]

When lp55xx_read() fails, "status" is an uninitialized variable and thus
may contain random value; using it leads to undefined behaviors.

The fix inserts a check for the return value of lp55xx_read: if it
fails, returns with its error code.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (tmp421) Correct the misspelling of the tmp442 compatible attribute in OF device ID table

[ Upstream commit f422449b58548a41e98fc97b259a283718e527db ]

Correct a typo in OF device ID table
The last one should be 'ti,tmp442'

Signed-off-by: Cheng-Min Ao <tony_ao@wiwynn.com>
Signed-off-by: Yu-Hsiang Chen <matt_chen@wiwynn.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atm: he: fix sign-extension overflow on large shift

[ Upstream commit cb12d72b27a6f41325ae23a11033cf5fedfa1b97 ]

Shifting the 1 by exp by an int can lead to sign-extension overlow when
exp is 31 since 1 is an signed int and sign-extending this result to an
unsigned long long will set the upper 32 bits.  Fix this by shifting an
unsigned long.

Detected by cppcheck:
(warning) Shifting signed 32-bit value by 31 bits is undefined behaviour

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: retry tests that expect build-id

[ Upstream commit f67ad87ab3120e82845521b18a2b99273a340308 ]

While running test_progs in a loop I found out that I'm sometimes hitting
"Didn't find expected build ID from the map" error.

Looking at stack_map_get_build_id_offset() it seems that it is racy (by
design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock
current->mm->mmap_sem).

Let's retry this test a single time.

Fixes: 13790d1cc72c ("bpf: add selftest for stackmap with build_id in NMI context")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: zero out build_id for BPF_STACK_BUILD_ID_IP

[ Upstream commit 4af396ae4836c4ecab61e975b8e61270c551894d ]

When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset,
make sure that build_id field is empty. Since we are using percpu
free list, there is a possibility that we might reuse some previous
bpf_stack_build_id with non-zero build_id.

Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: don't assume build-id length is always 20 bytes

[ Upstream commit 0b698005a9d11c0e91141ec11a2c4918a129f703 ]

Build-id length is not fixed to 20, it can be (`man ld` /--build-id):
  * 128-bit (uuid)
  * 160-bit (sha1)
  * any length specified in ld --build-id=0xhexstring

To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids,
assume that build-id is somewhere in the range of 1 .. 20.
Set the remaining bytes to zero.

v2:
* don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)",
  we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter
  this 'if' condition

Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix key refcounting in file locking code

[ Upstream commit 59d49076ae3e6912e6d7df2fd68e2337f3d02036 ]

Fix the refcounting of the authentication keys in the file locking code.
The vnode->lock_key member points to a key on which it expects to be
holding a ref, but it isn't always given an extra ref, however.

Fixes: 0fafdc9f888b ("afs: Fix file locking")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Don't set vnode->cb_s_break in afs_validate()

[ Upstream commit 4882a27cec24319d10f95e978ecc80050e3e3e15 ]

A cb_interest record is not necessarily attached to the vnode on entry to
afs_validate(), which can cause an oops when we try to bring the vnode's
cb_s_break up to date in the default case (ie. no current callback promise
and the vnode has not been deleted).

Fix this by simply removing the line, as vnode->cb_s_break will be set when
needed by afs_register_server_cb_interest() when we next get a callback
promise from RPC call.

The oops looks something like:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
    ...
    RIP: 0010:afs_validate+0x66/0x250 [kafs]
    ...
    Call Trace:
     afs_d_revalidate+0x8d/0x340 [kafs]
     ? __d_lookup+0x61/0x150
     lookup_dcache+0x44/0x70
     ? lookup_dcache+0x44/0x70
     __lookup_hash+0x24/0xa0
     do_unlinkat+0x11d/0x2c0
     __x64_sys_unlink+0x23/0x30
     do_syscall_64+0x4d/0xf0
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: ae3b7361dc0e ("afs: Fix validation/callback interaction")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: tc-testing: fix parsing of ife type

[ Upstream commit 91fa038d9446b5bf5ea80822790af7dd9bcbb5a2 ]

In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format
specifier for the ife type changed from 0x%X to %#llX, causing systematic
failures in the following TDC test cases:

 7682 - Create valid ife encode action with mark and pass control
 ef47 - Create valid ife encode action with mark and pipe control
 df43 - Create valid ife encode action with mark and continue control
 e4cf - Create valid ife encode action with mark and drop control
 ccba - Create valid ife encode action with mark and reclassify control
 a1cf - Create valid ife encode action with mark and jump control
 cb3d - Create valid ife encode action with mark value at 32-bit maximum
 95ed - Create valid ife encode action with prio and pass control
 aa17 - Create valid ife encode action with prio and pipe control
 74c7 - Create valid ife encode action with prio and continue control
 7a97 - Create valid ife encode action with prio and drop control
 f66b - Create valid ife encode action with prio and reclassify control
 3056 - Create valid ife encode action with prio and jump control
 7dd3 - Create valid ife encode action with prio value at 32-bit maximum
 05bb - Create valid ife encode action with tcindex and pass control
 ce65 - Create valid ife encode action with tcindex and pipe control
 09cd - Create valid ife encode action with tcindex and continue control
 8eb5 - Create valid ife encode action with tcindex and continue control
 451a - Create valid ife encode action with tcindex and drop control
 d76c - Create valid ife encode action with tcindex and reclassify control
 e731 - Create valid ife encode action with tcindex and jump control
 b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum
 2a9c - Create valid ife encode action with mac src parameter
 cf5c - Create valid ife encode action with mac dst parameter
 2353 - Create valid ife encode action with mac src and mac dst parameters
 552c - Create valid ife encode action with mark and type parameters
 0421 - Create valid ife encode action with prio and type parameters
 4017 - Create valid ife encode action with tcindex and type parameters
 fac3 - Create valid ife encode action with index at 32-bit maximnum
 7c25 - Create valid ife decode action with pass control
 dccb - Create valid ife decode action with pipe control
 7bb9 - Create valid ife decode action with continue control
 d9ad - Create valid ife decode action with drop control
 219f - Create valid ife decode action with reclassify control
 8f44 - Create valid ife decode action with jump control
 b330 - Create ife encode action with cookie

Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal
to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass
both with old and new tc binaries.
While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified

[ Upstream commit 5216bd77798e2ed773ecd45f3f368dcaec63e5dd ]

After commit 1c25324caf82 ("net/sched: act_tunnel_key: Don't dump dst port
if it wasn't set"), act_tunnel_key doesn't dump anymore the destination
port, unless it was explicitly configured. This caused systematic failures
in the following TDC test case:

 7a88 - Add tunnel_key action with cookie parameter

Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test
pass again.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: tc-testing: drop test on missing tunnel key id

[ Upstream commit e413615502a3324daba038f529932ba9a5248af0 ]

After merge of commit 80ef0f22ceda ("net/sched: act_tunnel_key: Allow
key-less tunnels"), act_tunnel_key does not reject anymore requests to
install 'set' rules where the key id is missing. Therefore, drop the
following TDC testcase:

 ba4e - Add tunnel_key set action with missing mandatory id parameter

because it's going to become a systematic fail as soon as userspace
iproute2 will start supporting key-less tunnels.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pvcalls-front: fix potential null dereference

[ Upstream commit b4711098066f1cf808d4dc11a1a842860a3292fe ]

 static checker warning:
    drivers/xen/pvcalls-front.c:373 alloc_active_ring()
    error: we previously assumed 'map->active.ring' could be null
           (see line 357)

drivers/xen/pvcalls-front.c
    351 static int alloc_active_ring(struct sock_mapping *map)
    352 {
    353     void *bytes;
    354
    355     map->active.ring = (struct pvcalls_data_intf *)
    356         get_zeroed_page(GFP_KERNEL);
    357     if (!map->active.ring)
                    ^^^^^^^^^^^^^^^^^
Check

    358         goto out;
    359
    360     map->active.ring->ring_order = PVCALLS_RING_ORDER;
    361     bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
    362                     PVCALLS_RING_ORDER);
    363     if (!bytes)
    364         goto out;
    365
    366     map->active.data.in = bytes;
    367     map->active.data.out = bytes +
    368         XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
    369
    370     return 0;
    371
    372 out:
--> 373     free_active_ring(map);
                                 ^^^
Add null check on map->active.ring before dereferencing it to avoid
any NULL pointer dereferences.

Fixes: 9f51c05dc41a ("pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Juergen Gross <jgross@suse.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: Dan Carpenter <dan.carpenter@oracle.com>
CC: xen-devel@lists.xenproject.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: backend: add missing of_node_puts

[ Upstream commit 4bb0e6d7258213d4893c2c876712fbba40e712fe ]

The device node iterators perform an of_node_get on each
iteration, so a jump out of the loop requires an of_node_put.

Remote and port also have augmented reference counts, so drop them
on each iteration and at the end of the function, respectively.
Remote is only used for the address it contains, not for the
contents of that address, so the reference count can be dropped
immediately.

The semantic patch that fixes the first part of this problem is
as follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

 for_each_available_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
+  of_node_put(child);
?  break;
   ...
}
... when != child
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547369264-24831-5-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

vhost: return EINVAL if iovecs size does not match the message size

[ Upstream commit 74ad7419489ddade8044e3c9ab064ad656520306 ]

We've failed to copy and process vhost_iotlb_msg so let userspace at
least know about it. For instance before these patch the code below runs
without any error:

int main()
{
  struct vhost_msg msg;
  struct iovec iov;
  int fd;

  fd = open("/dev/vhost-net", O_RDWR);
  if (fd == -1) {
    perror("open");
    return 1;
  }

  iov.iov_base = &msg;
  iov.iov_len = sizeof(msg)-4;

  if (writev(fd, &iov,1) == -1) {
    perror("writev");
    return 1;
  }

  return 0;
}

Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix PME notification not working in RV desktop

[ Upstream commit 20300db4aec5ba5edf6f0ad6f7111a51fbea7e10 ]

[Why]
PPLIB not receive the PME when unplug.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Don't assign dGPUs to APU topology devices

[ Upstream commit bbdf514fe5648566b0754476cbcb92ac3422dde2 ]

dGPUs need their own topology devices. Don't assign them to APU topology
devices with CPU cores.

Bug: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/66
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Elias Konstantinidis <ekondis@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: add missing of_node_put

[ Upstream commit f672b93e4a0a4947d2e1103ed8780e01e13eadb6 ]

Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.

An of_node_put is also needed when meson_probe_remote completes.  This was
present at the recursive call, but not in the call from meson_drv_probe.

The semantic match that finds this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
    when != true e == NULL
    when != of_node_put(e)
    when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1547372691-28324-4-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

always clear the X2APIC_ENABLE bit for PV guest

[ Upstream commit 5268c8f39e0efef81af2aaed160272d9eb507beb ]

Commit e657fcc clears cpu capability bit instead of using fake cpuid
value, the EXTD should always be off for PV guest without depending
on cpuid value. So remove the cpuid check in xen_read_msr_safe() to
always clear the X2APIC_ENABLE bit.

Signed-off-by: Talons Lee <xin.li@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_flow_offload: fix checking method of conntrack helper

[ Upstream commit 2314e879747e82896f51cce4488f6a00f3e1af7b ]

This patch uses nfct_help() to detect whether an established connection
needs conntrack helper instead of using test_bit(IPS_HELPER_BIT,
&ct->status).

The reason is that IPS_HELPER_BIT is only set when using explicit CT
target.

However, in the case that a device enables conntrack helper via command
"echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper", the status of
IPS_HELPER_BIT will not present any change, and consequently it loses
the checking ability in the context.

Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: John Crispin <john@phrozen.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: cxgb4i: add wait_for_completion()

[ Upstream commit 9e8f1c79831424d30c0e3df068be7f4a244157c9 ]

In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for
cmd completion, this can create race conditions, to avoid this add
wait_for_completion().

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix geometry descriptor size

[ Upstream commit 9be9db9f78f52ef03ee90063730cb9d730e7032b ]

Albeit we no longer rely on those hard-coded descriptor sizes, we still use
them as our defaults, so better get it right. While adding its sysfs
entries, we forgot to update the geometry descriptor size. It is 0x48
according to UFS2.1, and wasn't changed in UFS3.0.

[mkp: typo]

Fixes: c720c091222e (scsi: ufs: sysfs: geometry descriptor)
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedi: Add ep_state for login completion on un-reachable targets

[ Upstream commit 34a2ce887668db9dda4b56e6f155c49ac13f3e54 ]

When the driver finds invalid destination MAC for the first un-reachable
target, and before completes the PATH_REQ operation, set new ep_state to
OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper
open-iscsi layer is notified to complete the login process on the first
un-reachable target and thus proceed login to other reachable targets.

Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Fix system suspend status

[ Upstream commit ce9e7bce43526626f7cffe2e657953997870197e ]

hba->is_sys_suspended is set after successful system suspend but
not clear after successful system resume.

According to current behavior, hba->is_sys_suspended will not be set if
host is runtime-suspended but not system-suspended. Thus we shall aligh the
same policy: clear this flag even if host remains runtime-suspended after
ufshcd_system_resume is successfully returned.

Simply fix this flag to correct host status logs.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes

[ Upstream commit a94a2572b97744d3a35a1996df0e5cf6b2461a4a ]

Currently there is one cmd timeout timer and one qfull timer for each udev,
and whenever any new command is coming in we will update the cmd timer or
qfull timer. For some corner cases the timers are always working only for
the ringbuffer's and full queue's newest cmd. That's to say the timer won't
be fired even if one cmd has been stuck for a very long time and the
deadline is reached.

This fix will keep the cmd/qfull timers to be pended for the oldest cmd in
ringbuffer and full queue, and will update them with the next cmd's
deadline only when the old cmd's deadline is reached or removed from the
ringbuffer and full queue.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

isdn: i4l: isdn_tty: Fix some concurrency double-free bugs

[ Upstream commit 2ff33d6637393fe9348357285931811b76e1402f ]

The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be
concurrently executed.

isdn_tty_tiocmset
  isdn_tty_modem_hup
    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

isdn_tty_set_termios
  isdn_tty_modem_hup
    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

Thus, some concurrency double-free bugs may occur.

These possible bugs are found by a static tool written by myself and
my manual code review.

To fix these possible bugs, the mutex lock "modem_info_mutex" used in
isdn_tty_tiocmset() is added in isdn_tty_set_termios().

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Prevent RX starvation in stmmac_napi_poll()

[ Upstream commit fa0be0a43f101888ac677dba31b590963eafeaa1 ]

Currently, TX is given a budget which is consumed by stmmac_tx_clean()
and stmmac_rx() is given the remaining non-consumed budget.

This is wrong and in case we are sending a large number of packets this
can starve RX because remaining budget will be low.

Let's give always the same budget for RX and TX clean.

While at it, check if we missed any interrupts while we were in NAPI
callback by looking at DMA interrupt status.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Fix the logic of checking if RX Watchdog must be enabled

[ Upstream commit 3b5094665e273c4a2a99f7f5f16977c0f1e19095 ]

RX Watchdog can be disabled by platform definitions but currently we are
initializing the descriptors before checking if Watchdog must be
disabled or not.

Fix this by checking earlier if user wants Watchdog disabled or not.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Check if CBS is supported before configuring

[ Upstream commit 0650d4017f4d2eee67230a02285a7ae5204240c2 ]

Check if CBS is currently supported before trying to configure it in HW.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: dwxgmac2: Only clear interrupts that are active

[ Upstream commit fcc509eb10ff4794641e6ad3082118287a750d0a ]

In DMA interrupt handler we were clearing all interrupts status, even
the ones that were not active. Fix this and only clear the active
interrupts.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Fix PCI module removal leak

[ Upstream commit 6dea7e1881fd86b80da64e476ac398008daed857 ]

Since commit b7d0f08e9129, the enable / disable of PCI device is not
managed which will result in IO regions not being automatically unmapped.
As regions continue mapped it is currently not possible to remove and
then probe again the PCI module of stmmac.

Fix this by manually unmapping regions on remove callback.

Changes from v1:
- Fix build error

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id()

[ Upstream commit 0919871ac37fdcf46c7657da0f1742efe096b399 ]

Possible race accessing memdev structures after dropping the
mutex. Dan Williams says this could race against another thread
that is doing:

 # echo "ACPI0012:00" > /sys/bus/acpi/drivers/nfit/unbind

Reported-by: Jane Chu <jane.chu@oracle.com>
Fixes: 23222f8f8dce ("acpi, nfit: Add function to look up nvdimm...")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.

[ Upstream commit fb0bdec51a4901b7dd088de0a1e365e1b9f5cd21 ]

Commit 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer
dereference") moved the loading of r6 earlier in the code. As some
functions are called inbetween, r6 needs to be loaded again with the
address of swapper_pg_dir in order to set PTE pointers for
the Abatron BDI.

Fixes: 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mthca: Clear QP objects during their allocation

[ Upstream commit 9d9f59b4204bc41896c866b3e5856e5b416aa199 ]

As part of audit process to update drivers to use rdma_restrack_add()
ensure that QP objects is cleared before access. Such change fixes the
crash observed with uninitialized non zero sgid attr accessed by
ib_destroy_qp().

CPU: 3 PID: 74 Comm: kworker/u16:1 Not tainted 4.19.10-300.fc29.x86_64
Workqueue: ipoib_wq ipoib_cm_tx_reap [ib_ipoib]
RIP: 0010:rdma_put_gid_attr+0x9/0x30 [ib_core]
RSP: 0018:ffffb7ad819dbde8 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8d1bdf5a2e00 RCX: 0000000000002699
RDX: 206c656e72656af8 RSI: ffff8d1bf7ae6160 RDI: 206c656e72656b20
RBP: 0000000000000000 R08: 0000000000026160 R09: ffffffffc06b45bf
R10: ffffe849887da000 R11: 0000000000000002 R12: ffff8d1be30cb400
R13: ffff8d1bdf681800 R14: ffff8d1be2272400 R15: ffff8d1be30ca000
FS:  0000000000000000(0000) GS:ffff8d1bf7ac0000(0000)
knlGS:0000000000000000
Trace:
 ib_destroy_qp+0xc9/0x240 [ib_core]
 ipoib_cm_tx_reap+0x1f9/0x4e0 [ib_ipoib]
 process_one_work+0x1a1/0x3a0
 worker_thread+0x30/0x380
 ? pwq_unbound_release_workfn+0xd0/0xd0
 kthread+0x112/0x130
 ? kthread_create_worker_on_cpu+0x70/0x70
 ret_from_fork+0x22/0x40

Reported-by: Alexander Murashkin <AlexanderMurashkin@msn.com>
Tested-by: Alexander Murashkin <AlexanderMurashkin@msn.com>
Fixes: 1a1f460ff151 ("RDMA: Hold the sgid_attr inside the struct ib_ah/qp")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_flow_offload: fix interaction with vrf slave device

[ Upstream commit 10f4e765879e514e1ce7f52ed26603047af196e2 ]

In the forward chain, the iif is changed from slave device to master vrf
device. Thus, flow offload does not find a match on the lower slave
device.

This patch uses the cached route, ie. dst->dev, to update the iif and
oif fields in the flow entry.

After this patch, the following example works fine:

 # ip addr add dev eth0 1.1.1.1/24
 # ip addr add dev eth1 10.0.0.1/24
 # ip link add user1 type vrf table 1
 # ip l set user1 up
 # ip l set dev eth0 master user1
 # ip l set dev eth1 master user1

 # nft add table firewall
 # nft add flowtable f fb1 { hook ingress priority 0 \; devices = { eth0, eth1 } \; }
 # nft add chain f ftb-all {type filter hook forward priority 0 \; policy accept \; }
 # nft add rule f ftb-all ct zone 1 ip protocol tcp flow offload @fb1
 # nft add rule f ftb-all ct zone 1 ip protocol udp flow offload @fb1

Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: fix panic in stack_map_get_build_id() on i386 and arm32

[ Upstream commit beaf3d1901f4ea46fbd5c9d857227d99751de469 ]

As Naresh reported, test_stacktrace_build_id() causes panic on i386 and
arm32 systems. This is caused by page_address() returns NULL in certain
cases.

This patch fixes this error by using kmap_atomic/kunmap_atomic instead
of page_address.

Fixes: 615755a77b24 (" bpf: extend stackmap to save binary_build_id+offset instead of address")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock

[ Upstream commit 9f51c05dc41a6d69423e3d03d18eb7ab22f9ec19 ]

The problem is that we call this with a spin lock held.
The call tree is:
pvcalls_front_accept() holds bedata->socket_lock.
    -> create_active()
        -> __get_free_pages() uses GFP_KERNEL

The create_active() function is only called from pvcalls_front_accept()
with a spin_lock held, The allocation is not allowed to sleep and
GFP_KERNEL is not sufficient.

This issue was detected by using the Coccinelle software.

v2: Add a function doing the allocations which is called
    outside the lock and passing the allocated data to
    create_active().

v3: Use the matching deallocators i.e., free_page()
    and free_pages(), respectively.

v4: It would be better to pre-populate map (struct sock_mapping),
    rather than introducing one more new struct.

v5: Since allocating the data outside of this call it should also
    be freed outside, when create_active() fails.
    Move kzalloc(sizeof(*map2), GFP_ATOMIC) outside spinlock and
    use GFP_KERNEL instead.

v6: Drop the superfluous calls.

Suggested-by: Juergen Gross <jgross@suse.com>
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Suggested-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
CC: Julia Lawall <julia.lawall@lip6.fr>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Juergen Gross <jgross@suse.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
CC: xen-devel@lists.xenproject.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: correctly set initial window on active Fast Open sender

[ Upstream commit 31aa6503a15ba00182ea6dbbf51afb63bf9e851d ]

The existing BPF TCP initial congestion window (TCP_BPF_IW) does not
to work on (active) Fast Open sender. This is because it changes the
(initial) window only if data_segs_out is zero -- but data_segs_out
is also incremented on SYN-data.  This patch fixes the issue by
proerly accounting for SYN-data additionally.

Fixes: fc7478103c84 ("bpf: Adds support for setting initial cwnd")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_flow_offload: Fix reverse route lookup

[ Upstream commit a799aea0988ea0d1b1f263e996fdad2f6133c680 ]

Using the following example:

client 1.1.1.7 ---> 2.2.2.7 which dnat to 10.0.0.7 server

The first reply packet (ie. syn+ack) uses an incorrect destination
address for the reverse route lookup since it uses:

daddr = ct->tuplehash[!dir].tuple.dst.u3.ip;

which is 2.2.2.7 in the scenario that is described above, while this
should be:

daddr = ct->tuplehash[dir].tuple.src.u3.ip;

that is 10.0.0.7.

Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: jazz: fix 64bit build

[ Upstream commit 41af167fbc0032f9d7562854f58114eaa9270336 ]

64bit JAZZ builds failed with

  linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`:
  /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration
    of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`?
    [-Werror=implicit-function-declaration]
    pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
                                ^~~~~~~~~
                                CKSEG1ADDR
  /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from
    integer of different size [-Werror=int-to-pointer-cast]
    pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
            ^
  In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0,
                   from /linux-next/include/linux/compiler.h:248,
                   from /linux-next/include/linux/kernel.h:10,
                   from /linux-next/arch/mips/jazz/jazzdma.c:11:
  /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from
    pointer to integer of different size [-Werror=pointer-to-int-cast]
   #define _ACAST32_  (_ATYPE_)(_ATYPE32_) /* widen if necessary */
                               ^
  /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in
    expansion of macro `_ACAST32_`
   #define CPHYSADDR(a)  ((_ACAST32_(a)) & 0x1fffffff)
                           ^~~~~~~~~
  /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of
    macro `CPHYSADDR`
    r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));

Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup
fixes this.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR

[ Upstream commit 3e2ffd655cc6a694608d997738989ff5572a8266 ]

Since commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h
mutually exclusive") clang no longer reuses the OPTIMIZER_HIDE_VAR macro
from compiler-gcc - instead it gets the version in
include/linux/compiler.h.  Unfortunately that version doesn't actually
prevent compiler from optimizing out the variable.

Fix up by moving the macro out from compiler-gcc.h to compiler.h.
Compilers without incline asm support will keep working
since it's protected by an ifdef.

Also fix up comments to match reality since we are no longer overriding
any macros.

Build-tested with gcc and clang.

Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive")
Cc: Eli Friedman <efriedma@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: isci: initialize shost fully before calling scsi_add_host()

[ Upstream commit cc29a1b0a3f2597ce887d339222fa85b9307706d ]

scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the
command size to allocate based on the prot_capabilities. In the isci
driver, scsi_host_set_prot() is called after scsi_add_host() so the command
size gets calculated to be smaller than it needs to be.  Eventually,
scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it
was sized correctly and a buffer overrun may occur.

However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line
size, the mistake can go unnoticed.

The bug was noticed after the struct request size was reduced by commit
9d037ad707ed ("block: remove req->timeout_list")

Which likely reduced the allocated space for the request by an entire cache
line, enough that the overflow could be hit and it caused a panic, on boot,
at:

  RIP: 0010:t10_pi_complete+0x77/0x1c0
  Call Trace:
    <IRQ>
    sd_done+0xf5/0x340
    scsi_finish_command+0xc3/0x120
    blk_done_softirq+0x83/0xb0
    __do_softirq+0xa1/0x2e6
    irq_exit+0xbc/0xd0
    call_function_single_interrupt+0xf/0x20
    </IRQ>

sd_done() would call scsi_prot_sg_count() which reads the number of
entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of
the allocated space it reads a garbage number and erroneously calls
t10_pi_complete().

To prevent this, the calls to scsi_host_set_prot() are moved into
isci_host_alloc() before the call to scsi_add_host(). Out of caution, also
move the similar call to scsi_host_set_guard().

Fixes: 3d2d75254915 ("[SCSI] isci: T10 DIF support")
Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Intel SCU Linux support <intel-linux-scu@intel.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param

[ Upstream commit 72b4a0465f995175a2e22cf4a636bf781f1f28a7 ]

The return code should be check while qla4xxx_copy_from_fwddb_param fails.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: fix leaking object reference count

[ Upstream commit b91d9036883793122cf6575ca4dfbfbdd201a83d ]

There is no code that decreases the reference count of stateful objects
in error path of the nft_add_set_elem(). this causes a leak of reference
count of stateful objects.

Test commands:
   $nft add table ip filter
   $nft add counter ip filter c1
   $nft add map ip filter m1 { type ipv4_addr : counter \;}
   $nft add element ip filter m1 { 1 : c1 }
   $nft add element ip filter m1 { 1 : c1 }
   $nft delete element ip filter m1 { 1 }
   $nft delete counter ip filter c1

Result:
   Error: Could not process rule: Device or resource busy
   delete counter ip filter c1
   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^

At the second 'nft add element ip filter m1 { 1 : c1 }', the reference
count of the 'c1' is increased then it tries to insert into the 'm1'. but
the 'm1' already has same element so it returns -EEXIST.
But it doesn't decrease the reference count of the 'c1' in the error path.
Due to a leak of the reference count of the 'c1', the 'c1' can't be
removed by 'nft delete counter ip filter c1'.

Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: forwarding: Add a test for VLAN deletion

[ Upstream commit 4fabf3bf93a194c7fa5288da3e0af37e4b943cf3 ]

Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is
not affected.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum_acl: Add cleanup after C-TCAM update error condition

[ Upstream commit ff0db43cd6c530ff944773ccf48ece55d32d0c22 ]

When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert().
In case of C-TCAM HW insertion error, the opposite action should take
place.
Add error handling case in which the C-TCAM region entry is removed, by
calling cregion->ops->entry_remove().

Fixes: a0a777b9409f ("mlxsw: spectrum_acl: Start using A-TCAM")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xprtrdma: Double free in rpcrdma_sendctxs_create()

[ Upstream commit 6e17f58c486d9554341f70aa5b63b8fbed07b3fa ]

The clean up is handled by the caller, rpcrdma_buffer_create(), so this
call to rpcrdma_sendctxs_destroy() leads to a double free.

Fixes: ae72950abf99 ("xprtrdma: Add data structure to manage RDMA Send arguments")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: ath79: Enable OF serial ports in the default config

[ Upstream commit 565dc8a4f55e491935bfb04866068d21784ea9a4 ]

CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF
boards, enable it in the default config to get a working setup out of
the box.

Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx4: Get rid of page operation after dma_alloc_coherent

[ Upstream commit f65e192af35058e5c82da9e90871b472d24912bc ]

This patch solves a crash at the time of mlx4 driver unload or system
shutdown. The crash occurs because dma_alloc_coherent() returns one
value in mlx4_alloc_icm_coherent(), but a different value is passed to
dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because
when allocated, that pointer is passed to sg_set_buf() to record it,
then when freed it is re-calculated by calling
lowmem_page_address(sg_page()) which returns a different value. Solve
this by recording the value that dma_alloc_coherent() returns, and
passing this to dma_free_coherent().

This patch is roughly equivalent to commit 378efe798ecf ("RDMA/hns: Get
rid of page operation after dma_alloc_coherent").

Based-on-code-from: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem

[ Upstream commit 3aa8b8bbc142eeaac89891de584535ceb7fce405 ]

These files need
   #include <linux/mod_devicetable.h>
to compile correctly.

Fixes: ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Test [::] -> [::1] rewrite in sys_sendmsg in test_sock_addr

[ Upstream commit 976b4f3a4646fbf0d189caca25f91f82e4be4b5a ]

Test that sys_sendmsg BPF hook doesn't break sys_sendmsg behaviour to
rewrite destination IPv6 = [::] with [::1] (BSD'ism).

Two test cases are added:

1) User passes dst IPv6 = [::] and BPF_CGROUP_UDP6_SENDMSG program
   doesn't touch it.

2) User passes dst IPv6 != [::], but BPF_CGROUP_UDP6_SENDMSG program
   rewrites it with [::].

In both cases [::1] is used by sys_sendmsg code eventually and datagram
is sent successfully for unconnected UDP socket.

Example of relevant output:
  Test case: sendmsg6: set dst IP = [::] (BSD'ism) .. [PASS]
  Test case: sendmsg6: preserve dst IP = [::] (BSD'ism) .. [PASS]

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix [::] -> [::1] rewrite in sys_sendmsg

[ Upstream commit e8e36984080b55ac5e57bdb09a5b570f2fc8e963 ]

sys_sendmsg has supported unspecified destination IPv6 (wildcard) for
unconnected UDP sockets since 876c7f41. When [::] is passed by user as
destination, sys_sendmsg rewrites it with [::1] to be consistent with
BSD (see "BSD'ism" comment in the code).

This didn't work when cgroup-bpf was enabled though since the rewrite
[::] -> [::1] happened before passing control to cgroup-bpf block where
fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that
might or might not be changed by BPF program). That way if user passed
[::] as dst IPv6 it was first rewritten with [::1] by original code from
876c7f41, but then rewritten back with [::] by cgroup-bpf block.

It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present
(CONFIG_CGROUP_BPF=y was enough).

The fix is to apply BSD'ism after cgroup-bpf block so that [::] is
replaced with [::1] no matter where it came from: passed by user to
sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program.

Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg")
Reported-by: Nitin Rawat <nitin.rawat@intel.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns: Fix use after free identified by SLUB debug

[ Upstream commit bb989501abcafa0de5f18b0ec0ec459b5b817908 ]

When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will
identify a use after free bug:

[134.189505] Unable to handle kernel paging request at virtual address
006b6b6b6b6b6b6b
[134.197553] Mem abort info:
[134.200381]   ESR = 0x96000004
[134.203487]   Exception class = DABT (current EL), IL = 32 bits
[134.209497]   SET = 0, FnV = 0
[134.212596]   EA = 0, S1PTW = 0
[134.215777] Data abort info:
[134.218701]   ISV = 0, ISS = 0x00000004
[134.222596]   CM = 0, WnR = 0
[134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges
[134.232851] Internal error: Oops: 96000004 [#1] SMP
[134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G
OE     4.19.5-1.2.34.aarch64 #1
[134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018
[134.255181] pstate: 20000005 (nzCv daif -PAN -UAO)
[134.260044] pc : hns_ae_put_handle+0x38/0x60
[134.264372] lr : hns_ae_put_handle+0x24/0x60
[134.268700] sp : ffff00001be93c50
[134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040
[134.277442] x27: 0000000000000000 x26: 0000000000000000
[134.282830] x25: 0000000056000000 x24: 0000000000000015
[134.288284] x23: ffff0000096fe098 x22: ffff000001050070
[134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098
[134.303287] x19: ffff80afb75ec098 x18: 0000000000000000
[134.312945] x17: 0000000000000000 x16: 0000000000000000
[134.322517] x15: 0000000000000002 x14: 0000000000000000
[134.332030] x13: dead000000000100 x12: ffff7e02bea3c988
[134.341487] x11: ffff80affbee9e68 x10: 0000000000000000
[134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000
[134.360569] x7 : dead000000000100 x6 : ffff000009579748
[134.370059] x5 : 0000000000210d00 x4 : 0000000000000000
[134.379550] x3 : 0000000000000001 x2 : 0000000000000000
[134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000
[134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd)
[134.408498] Call trace:
[134.414611]  hns_ae_put_handle+0x38/0x60
[134.422208]  hnae_put_handle+0xd4/0x108
[134.429563]  hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv]
[134.438342]  platform_drv_remove+0x2c/0x70
[134.445958]  device_release_driver_internal+0x174/0x208
[134.454810]  driver_detach+0x70/0xd8
[134.461913]  bus_remove_driver+0x64/0xe8
[134.469396]  driver_unregister+0x34/0x60
[134.476822]  platform_driver_unregister+0x20/0x30
[134.485130]  hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv]
[134.494634]  __arm64_sys_delete_module+0x238/0x290

struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is
freed, than use hnae_handle will cause use after free panic.

This patch frees vf_cb after hnae_handle used.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix qed_ll2_post_rx_buffer_notify_fw() by adding a write memory barrier

[ Upstream commit 46721c3d9e273aea880e9ff835b0e1271e1cd2fb ]

Make sure chain element is updated before ringing the doorbell.

Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix qed_chain_set_prod() for PBL chains with non power of 2 page count

[ Upstream commit 2d533a9287f2011632977e87ce2783f4c689c984 ]

In PBL chains with non power of 2 page count, the producer is not at the
beginning of the chain when index is 0 after a wrap. Therefore, after the
producer index wrap around, page index should be calculated more carefully.

Signed-off-by: Denis Bolotin <dbolotin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/pvcalls: remove set but not used variable 'intf'

[ Upstream commit 1f8ce09b36c41a026a37a24b20efa32000892a64 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/pvcalls-back.c: In function 'pvcalls_sk_state_change':
drivers/xen/pvcalls-back.c:286:28: warning:
 variable 'intf' set but not used [-Wunused-but-set-variable]

It not used since e6587cdbd732 ("pvcalls-back: set -ENOTCONN in
pvcalls_conn_back_read")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: mc13xxx: Fix a missing check of a register-read failure

[ Upstream commit 9e28989d41c0eab57ec0bb156617a8757406ff8a ]

When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will
contain random value. Further execution uses "old_adc0" even when
mc13xxx_reg_read() fails.
The fix checks the return value of mc13xxx_reg_read(), and exits
the execution when it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()

[ Upstream commit 75d4c5e03c2ae9902ab521024b10291f6fc9515b ]

Use devm_regmap_add_irq_chip and clean up error path in probe
and also the remove function.

Reported-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove

[ Upstream commit 18e294ddafaeb80a1e2e10c9bd750a6cb8388d5b ]

The driver adds different MFD child devices via mfd_add_devices() and
hence it is required to call mfd_remove_devices() to remove MFD child
devices.

Fixes: 5e0115581bbc ("cros_ec: Move cros_ec_dev module to drivers/mfd")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: axp20x: Add supported cells for AXP803

[ Upstream commit ea90e7b47f0a8bd2fe14e9a88f523de7c67db90a ]

Parts of the AXP803 are compatible with their counterparts on the AXP813.
These include the GPIO, ADC, AC and battery power supplies.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: axp20x: Re-align MFD cell entries

[ Upstream commit 753a8d083e085c6f552c7982749de4cc7c40e2ac ]

In the axp20x driver, the various mfd_cell lists had varying amounts
of indentation, sometimes even within the same list. For the axp288,
there's no alignment at all.

Re-align the right hand side of the assignments with the least amount
of tabs possible. Also collapse the closing bracket and the opening
bracket of the next entry onto the same line for the axp288, to be
consistent with all the other mfd_cell lists.

This patch is whitespace change only. No functionality is modified.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: axp20x: Add AC power supply cell for AXP813

[ Upstream commit 4a19f9a65375ca9781b3ca9e810ece92edfc3e78 ]

As axp20x-ac-power-supply now supports AXP813, add a cell for it.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: wm5110: Add missing ASRC rate register

[ Upstream commit 04c801c18ded421845324255e660147a6f58dcd6 ]

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: qcom_rpm: write fw_version to CTRL_REG

[ Upstream commit 504e4175829c44328773b96ad9c538e4783a8d22 ]

This is required as part of the initialization sequence on certain SoCs.

If these registers are not initialized, the hardware can be unresponsive.
This fixes the driver on apq8060 (HP TouchPad device).

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: bd9571mwv: Add volatile register to make DVFS work

[ Upstream commit b0aff01e7aa6ad2d6998ef1323843212d1db8b04 ]

Because BD9571MWV_DVFS_MONIVDAC is not defined in the volatile table,
the physical register value is not updated by regmap and DVFS doesn't
work as expected. Fix it!

Fixes: d3ea21272094 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver")
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
[wsa: rebase, add 'Fixes', reword commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: ab8500-core: Return zero in get_register_interruptible()

[ Upstream commit 10628e3ecf544fa2e4e24f8e112d95c37884dc98 ]

This function is supposed to return zero on success or negative error
codes on error.  Unfortunately, there is a bug so it sometimes returns
non-zero, positive numbers on success.

I noticed this bug during review and I can't test it.  It does appear
that the return is sometimes propogated back to _regmap_read() where all
non-zero returns are treated as failure so this may affect run time.

Fixes: 47c1697508f2 ("mfd: Align ab8500 with the abx500 interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: mt6397: Do not call irq_domain_remove if PMIC unsupported

[ Upstream commit a177276aa098aa47a100d51a13eaaef029604b6d ]

If the PMIC ID is unknown, the current code would call
irq_domain_remove and panic, as pmic->irq_domain is only
initialized by mt6397_irq_init.

Return immediately with an error, if the chip ID is unsupported.

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: db8500-prcmu: Fix some section annotations

[ Upstream commit a3888f62fe66429fad3be7f2ba962e1e08c26fd6 ]

When building the kernel with Clang, the following section mismatch
warnings appear:

WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from
the function db8500_prcmu_probe() to the function
.init.text:init_prcm_registers()
The function db8500_prcmu_probe() references
the function __init init_prcm_registers().
This is often because db8500_prcmu_probe lacks a __init
annotation or the annotation of init_prcm_registers is wrong.

WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from
the function db8500_prcmu_probe() to the function
.init.text:fw_project_name()
The function db8500_prcmu_probe() references
the function __init fw_project_name().
This is often because db8500_prcmu_probe lacks a __init
annotation or the annotation of fw_project_name is wrong.

db8500_prcmu_probe should not be marked as __init so remove the __init
annotation from fw_project_name and init_prcm_registers.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: twl-core: Fix section annotations on {,un}protect_pm_master

[ Upstream commit 8838555089f0345b87f4277fe5a8dd647dc65589 ]

When building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from
the function twl_probe() to the function
.init.text:unprotect_pm_master()
The function twl_probe() references
the function __init unprotect_pm_master().
This is often because twl_probe lacks a __init
annotation or the annotation of unprotect_pm_master is wrong.

Remove the __init annotation on the *protect_pm_master functions so
there is no more mismatch.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read

[ Upstream commit e6587cdbd732eacb4c7ce592ed46f7bbcefb655f ]

When a connection is closing we receive on pvcalls_sk_state_change
notification. Instead of setting the connection as closed immediately
(-ENOTCONN), let's read one more time from it: pvcalls_conn_back_read
will set the connection as closed when necessary.

That way, we avoid races between pvcalls_sk_state_change and
pvcalls_back_ioworker.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pvcalls-front: properly allocate sk

[ Upstream commit beee1fbe8f7d57d6ebaa5188f9f4db89c2077196 ]

Don't use kzalloc: it ends up leaving sk->sk_prot not properly
initialized. Use sk_alloc instead and define our own trivial struct
proto.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pvcalls-front: don't try to free unallocated rings

[ Upstream commit 96283f9a084e23d7cda2d3c5d1ffa6df6cf1ecec ]

inflight_req_id is 0 when initialized. If inflight_req_id is 0, there is
no accept_map to free. Fix the check in pvcalls_front_release.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pvcalls-front: read all data before closing the connection

[ Upstream commit b79470b64fa9266948d1ce8d825ced94c4f63293 ]

When a connection is closing in_error is set to ENOTCONN. There could
still be outstanding data on the ring left by the backend. Before
closing the connection on the frontend side, drain the ring.

Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells

[ Upstream commit b40ee006fe6a8a25093434e5d394128c356a48f3 ]

Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that
different instances are uniquely identified. This is required in order
to support registering of multiple instances of same ti_am335x_tscadc IP.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables

[ Upstream commit 61170ee9386888f1e6f7e9cc58e8d9a8c2a3c1dd ]

Commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly
to human eye") made the parse-dt function return early when using an auto-
generated brightness-table, but didn't take into account that some more
settings were handled below the brightness handling, like power-on-delays
and also setting the pdata enable-gpio to -EINVAL.

This surfaces for example in the case of a backlight without any
enable-gpio which then tries to use gpio-0 in error.

Fix this by simply moving the trailing settings above the brightness
handling.

Fixes: 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KEYS: allow reaching the keys quotas exactly

commit a08bf91ce28ed3ae7b6fef35d843fef8dc8c2cd9 upstream.

If the sysctl 'kernel.keys.maxkeys' is set to some number n, then
actually users can only add up to 'n - 1' keys.  Likewise for
'kernel.keys.maxbytes' and the root_* versions of these sysctls.  But
these sysctls are apparently supposed to be *maximums*, as per their
names and all documentation I could find -- the keyrings(7) man page,
Documentation/security/keys/core.rst, and all the mentions of EDQUOT
meaning that the key quota was *exceeded* (as opposed to reached).

Thus, fix the code to allow reaching the quotas exactly.

Fixes: 0b77f5bfb45c ("keys: make the keyring quotas controllable through /proc/sys")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Disable PC beep in passthrough on alc285

commit c8c6ee611926685a7d753409e0a6e48b9e1b8748 upstream.

It is reported that there's a constant background "hum/whitenoise"
in the headset on the Lenovo X1 machines with the codec alc285, and it
is confirmed that if we run the command below, the noise will stop.
 sudo hda-verb /dev/snd/hwC0D0 0x1d SET_PIN_WIDGET_CONTROL 0x0

Then I consulted this issue with Kailang, he told me the pin 0x1d on
this codec is used for PC beep in, the noise probably comes from this
pin and we can also disable the PC beep in passthrough, then the PC
beep in will not affect other sound playback.

Fixes: c4cfcf6f4297 ("ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1660581
Cc: <stable@vger.kernel.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5

commit 7f665b1c3283aae5b61843136d0a8ee808ba3199 upstream.

On the System76 Oryx Pro (oryp5), there is a headset microphone input
attached to 0x19 that does not have a jack detect. In order to get it
working, the pin configuration needs to be set correctly, and the
ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is
similar to the MIC_NO_PRESENCE fixups for some Dell laptops, except we
have a separate microphone jack that is already configured correctly.

Since the ALC1220 does not have a fixup similar to
ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, I have exposed the fixup from the
ALC269 in a way that it can be accessed from the
alc1220_fixup_system76_oryp5 function. In addition, the
alc1220_fixup_clevo_p950 needs to be applied to gain speaker output.

Signed-off-by: Jeremy Soller <jeremy@system76.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc, oom: do not report alien mms when setting oom_score_adj

commit b2b469939e93458753cfbf8282ad52636495965e upstream.

Tetsuo has reported that creating a thousands of processes sharing MM
without SIGHAND (aka alien threads) and setting
/proc/<pid>/oom_score_adj will swamp the kernel log and takes ages [1]
to finish.  This is especially worrisome that all that printing is done
under RCU lock and this can potentially trigger RCU stall or softlockup
detector.

The primary reason for the printk was to catch potential users who might
depend on the behavior prior to 44a70adec910 ("mm, oom_adj: make sure
processes sharing mm have same view of oom_score_adj") but after more
than 2 years without a single report I guess it is safe to simply remove
the printk altogether.

The next step should be moving oom_score_adj over to the mm struct and
remove all the tasks crawling as suggested by [2]

[1] http://lkml.kernel.org/r/97fce864-6f75-bca5-14bc-12c9f890e740@i-love.sakura.ne.jp
[2] http://lkml.kernel.org/r/20190117155159.GA4087@dhcp22.suse.cz

Link: http://lkml.kernel.org/r/20190212102129.26288-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Yong-Taek Lee <ytk.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

numa: change get_mempolicy() to use nr_node_ids instead of MAX_NUMNODES

commit 050c17f239fd53adb55aa768d4f41bc76c0fe045 upstream.

The system call, get_mempolicy() [1], passes an unsigned long *nodemask
pointer and an unsigned long maxnode argument which specifies the length
of the user's nodemask array in bits (which is rounded up).  The manual
page says that if the maxnode value is too small, get_mempolicy will
return EINVAL but there is no system call to return this minimum value.
To determine this value, some programs search /proc/<pid>/status for a
line starting with "Mems_allowed:" and use the number of digits in the
mask to determine the minimum value.  A recent change to the way this line
is formatted [2] causes these programs to compute a value less than
MAX_NUMNODES so get_mempolicy() returns EINVAL.

Change get_mempolicy(), the older compat version of get_mempolicy(), and
the copy_nodes_to_user() function to use nr_node_ids instead of
MAX_NUMNODES, thus preserving the defacto method of computing the minimum
size for the nodemask array and the maxnode argument.

[1] http://man7.org/linux/man-pages/man2/get_mempolicy.2.html
[2] https://lore.kernel.org/lkml/1545405631-6808-1-git-send-email-longman@redhat.com

Link: http://lkml.kernel.org/r/20190211180245.22295-1-rcampbell@nvidia.com
Fixes: 4fb8e5b89bcbbbb ("include/linux/nodemask.h: use nr_node_ids (not MAX_NUMNODES) in __nodemask_pr_numnodes()")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: avoid repeatedly adding inode to mdsc->snap_flush_list

commit 04242ff3ac0abbaa4362f97781dac268e6c3541a upstream.

Otherwise, mdsc->snap_flush_list may get corrupted.

Cc: stable@vger.kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libceph: handle an empty authorize reply

commit 0fd3fd0a9bb0b02b6435bb7070e9f7b82a23f068 upstream.

The authorize reply can be empty, for example when the ticket used to
build the authorizer is too old and TAG_BADAUTHORIZER is returned from
the service.  Calling ->verify_authorizer_reply() results in an attempt
to decrypt and validate (somewhat) random data in au->buf (most likely
the signature block from calc_signature()), which fails and ends up in
con_fault_finish() with !con->auth_retry.  The ticket isn't invalidated
and the connection is retried again and again until a new ticket is
obtained from the monitor:

  libceph: osd2 192.168.122.1:6809 bad authorize reply
  libceph: osd2 192.168.122.1:6809 bad authorize reply
  libceph: osd2 192.168.122.1:6809 bad authorize reply
  libceph: osd2 192.168.122.1:6809 bad authorize reply

Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry.

Cc: stable@vger.kernel.org
Fixes: 5c056fdc5b47 ("libceph: verify authorize reply on connect")
Link: https://tracker.ceph.com/issues/20164
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: Free mpath object when rhashtable insertion fails

commit 4ff3a9d14c6c06eaa4e5976c61599ea2bd9e81b2 upstream.

When rhashtable insertion fails the mesh table code doesn't free
the now-orphan mesh path object.  This patch fixes that.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: Use linked list instead of rhashtable walk for mesh tables

commit b4c3fbe6360178dc2181b7b43b7ae793a192b282 upstream.

The mesh table code walks over hash tables for two purposes.  First of
all it's used as part of a netlink dump process, but it is also used
for looking up entries to delete using criteria other than the hash
key.

The second purpose is directly contrary to the design specification
of rhashtable walks.  It is only meant for use by netlink dumps.

This is because rhashtable is resizable and you cannot obtain a
stable walk over it during a resize process.

In fact mesh's use of rhashtable for dumping is bogus too.  Rather
than using rhashtable walk's iterator to keep track of the current
position, it always converts the current position to an integer
which defeats the purpose of the iterator.

Therefore this patch converts all uses of rhashtable walk into a
simple linked list.

This patch also adds a new spin lock to protect the hash table
insertion/removal as well as the walk list modifications.  In fact
the previous code was buggy as the removals can race with each
other, potentially resulting in a double-free.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: Restore vif beacon interval if start ap fails

commit 83e37e0bdd1470bbe6612250b745ad39b1a7b130 upstream.

The starting of AP interface can fail due to invalid
beacon interval, which does not match the minimum gcd
requirement set by the wifi driver. In such case, the
beacon interval of that interface gets updated with
that invalid beacon interval.

The next time that interface is brought up in AP mode,
an interface combination check is performed and the
beacon interval is taken from the previously set value.

In a case where an invalid beacon interval, i.e. a beacon
interval value which does not satisfy the minimum gcd criteria
set by the driver, is set, all the subsequent trials to
bring that interface in AP mode will fail, even if the
subsequent trials have a valid beacon interval.

To avoid this, in case of a failure in bringing up an
interface in AP mode due to interface combination error,
the interface beacon interval which is stored in bss
conf, needs to be restored with the last working value
of beacon interval.

Tested on ath10k using WCN3990.

Cc: stable@vger.kernel.org
Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2

commit af14b2c98adb85e9517390bb88309338b9075350 upstream.

Similarly to PXA3xx, pinctrl-single can't set pin direction on MMP2 either.
See also: commit 9dabfdd84bdfa ("gpio: pxa: disable pinctrl calls for
PXA3xx")

Cc: stable@vger.kernel.org
Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: MT7621: use a per instance irq_chip structure

commit fa84667b98fd1a191b2465d66b440bda6714b3bf upstream.

This fixes the kernel complains:
gpio gpiochip1: (1e000600.gpio-bank1): detected irqchip that is shared
    with multiple gpiochips: please fix the driver.
gpio gpiochip2: (1e000600.gpio-bank2): detected irqchip that is shared
    with multiple gpiochips: please fix the driver.

Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621")
Cc: stable@vger.kernel.org
Signed-off-by: René van Dorst <opensource@vdorst.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Tested-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: eBPF: Always return sign extended 32b values

commit 13443154f6cac61d148471ede6d7f1f6b5ea946a upstream.

The function prototype used to call JITed eBPF code (ie. the type of the
struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64
ABI that MIPS64 kernels target defines that 32 bit integers should
always be sign extended when passed in registers as either arguments or
return values.

This means that when returning any value which may not already be sign
extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform
that sign extension in order to comply with the n64 ABI. Without this we
see strange looking test failures from test_bpf.ko, such as:

  test_bpf: #65 ALU64_MOV_X:
    dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)

Although the return value printed matches the expected value, this is
only because printf is only examining the least significant 32 bits of
the 64 bit register value we returned. The register holding the expected
value is sign extended whilst the v0 register was set to a zero extended
value by our JITed code, so when compared by a conditional branch
instruction the values are not equal.

We already handle this when the return value register is of type
REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix number of entries in trace header

commit 9e7382153f80ba45a0bbcd540fb77d4b15f6e966 upstream.

The following commit

  441dae8f2f29 ("tracing: Add support for display of tgid in trace output")

removed the call to print_event_info() from print_func_help_header_irq()
which results in the ftrace header not reporting the number of entries
written in the buffer. As this wasn't the original intent of the patch,
re-introduce the call to print_event_info() to restore the orginal
behaviour.

Link: http://lkml.kernel.org/r/20190214152950.4179-1-quentin.perret@arm.com
Acked-by: Joel Fernandes <joelaf@google.com>
Cc: stable@vger.kernel.org
Fixes: 441dae8f2f29 ("tracing: Add support for display of tgid in trace output")
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction

commit 0ac569bf6a7983c0c5747d6df8db9dc05bc92b6c upstream.

commit e46daee53bb5 ("ARM: 8806/1: kprobes: Fix false positive with
FORTIFY_SOURCE") introduced a regression in optimized kprobes. It
triggers "invalid instruction" oopses when using kprobes instrumentation
through lttng and perf. This commit was introduced in kernel v4.20, and
has been backported to stable kernels 4.19 and 4.14.

This crash was also reported by Hongzhi Song on the redhat bugzilla
where the patch was originally introduced.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1639397
Link: https://bugs.lttng.org/issues/1174
Link: https://lore.kernel.org/lkml/342740659.2887.1549307721609.JavaMail.zimbra@efficios.com
Fixes: e46daee53bb5 ("ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: Robert Berger <Robert.Berger@ReliableEmbeddedSystems.com>
Tested-by: Robert Berger <Robert.Berger@ReliableEmbeddedSystems.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Robert Berger <Robert.Berger@ReliableEmbeddedSystems.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org> # v4.14+
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.25

ax25: fix possible use-after-free

commit 63530aba7826a0f8e129874df9c4d264f9db3f9e upstream.

syzbot found that ax25 routes where not properly protected
against concurrent use [1].

In this particular report the bug happened while
copying ax25->digipeat.

Fix this problem by making sure we call ax25_get_route()
while ax25_route_lock is held, so that no modification
could happen while using the route.

The current two ax25_get_route() callers do not sleep,
so this change should be fine.

Once we do that, ax25_get_route() no longer needs to
grab a reference on the found route.

[1]
ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113
Read of size 66 at addr ffff888066641a80 by task syz-executor2/531

ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1db/0x2d0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x24/0x50 mm/kasan/common.c:130
 memcpy include/linux/string.h:352 [inline]
 kmemdup+0x42/0x60 mm/util.c:113
 kmemdup include/linux/string.h:425 [inline]
 ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424
 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224
 __sys_connect+0x357/0x490 net/socket.c:1664
 __do_sys_connect net/socket.c:1675 [inline]
 __se_sys_connect net/socket.c:1672 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1672
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458099
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099
RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4
R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff

Allocated by task 526:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:496 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
 kmalloc include/linux/slab.h:545 [inline]
 ax25_rt_add net/ax25/ax25_route.c:95 [inline]
 ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233
 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
 sock_do_ioctl+0xe2/0x400 net/socket.c:950
 sock_ioctl+0x32f/0x6c0 net/socket.c:1074
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
Freed by task 550:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
 __cache_free mm/slab.c:3487 [inline]
 kfree+0xcf/0x230 mm/slab.c:3806
 ax25_rt_add net/ax25/ax25_route.c:92 [inline]
 ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233
 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
 sock_do_ioctl+0xe2/0x400 net/socket.c:950
 sock_ioctl+0x32f/0x6c0 net/socket.c:1074
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888066641a80
 which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
 96-byte region [ffff888066641a80, ffff888066641ae0)
The buggy address belongs to the page:
page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0
flags: 0x1fffc0000000200(slab)
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0
raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc
>ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
                   ^
 ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mISDN: fix a race in dev_expire_timer()

commit bdcc5bc25548ef6b08e2e43937148f907c212292 upstream.

Since mISDN_close() uses dev->pending to iterate over active
timers, there is a chance that one timer got removed from the
->pending list in dev_expire_timer() but that the thread
has not called yet wake_up_interruptible()

So mISDN_close() could miss this and free dev before
completion of at least one dev_expire_timer()

syzbot was able to catch this race :

BUG: KASAN: use-after-free in register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827
Write of size 8 at addr ffff88809fc18948 by task syz-executor1/24769

CPU: 1 PID: 24769 Comm: syz-executor1 Not tainted 5.0.0-rc5 #60
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 __asan_report_store8_noabort+0x17/0x20 mm/kasan/generic_report.c:140
 register_lock_class+0x140c/0x1bf0 kernel/locking/lockdep.c:827
 __lock_acquire+0x11f/0x4700 kernel/locking/lockdep.c:3224
 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3841
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152
 __wake_up_common_lock+0xc7/0x190 kernel/sched/wait.c:120
 __wake_up+0xe/0x10 kernel/sched/wait.c:145
 dev_expire_timer+0xe4/0x3b0 drivers/isdn/mISDN/timerdev.c:174
 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
protocol 88fb is buggy, dev hsr_slave_0
protocol 88fb is buggy, dev hsr_slave_1
 expire_timers kernel/time/timer.c:1362 [inline]
 __run_timers kernel/time/timer.c:1681 [inline]
 __run_timers kernel/time/timer.c:1649 [inline]
 run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
 __do_softirq+0x266/0x95a kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0x180/0x1d0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
 </IRQ>
RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:101
Code: 90 90 90 90 55 48 89 e5 48 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 98 12 92 7e 81 e2 00 01 1f 00 75 2b 8b 90 d8 12 00 00 <83> fa 02 75 20 48 8b 88 e0 12 00 00 8b 80 dc 12 00 00 48 8b 11 48
RSP: 0018:ffff8880589b7a60 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffff888087ce25c0 RBX: 0000000000000001 RCX: ffffffff818f8ca3
RDX: 0000000000000000 RSI: ffffffff818f8b48 RDI: 0000000000000001
RBP: ffff8880589b7a60 R08: ffff888087ce25c0 R09: ffffed1015d25bd0
R10: ffffed1015d25bcf R11: ffff8880ae92de7b R12: ffffea0001ae4680
R13: ffffea0001ae4688 R14: 0000000000000000 R15: ffffea0001b41648
 PageIdle include/linux/page-flags.h:398 [inline]
 page_is_idle include/linux/page_idle.h:29 [inline]
 mark_page_accessed+0x618/0x1140 mm/swap.c:398
 touch_buffer fs/buffer.c:59 [inline]
 __find_get_block+0x312/0xcc0 fs/buffer.c:1298
 sb_find_get_block include/linux/buffer_head.h:338 [inline]
 recently_deleted fs/ext4/ialloc.c:682 [inline]
 find_inode_bit.isra.0+0x202/0x510 fs/ext4/ialloc.c:722
 __ext4_new_inode+0x14ad/0x52c0 fs/ext4/ialloc.c:914
 ext4_symlink+0x3f8/0xbe0 fs/ext4/namei.c:3096
 vfs_symlink fs/namei.c:4126 [inline]
 vfs_symlink+0x378/0x5d0 fs/namei.c:4112
 do_symlinkat+0x22b/0x290 fs/namei.c:4153
 __do_sys_symlink fs/namei.c:4172 [inline]
 __se_sys_symlink fs/namei.c:4170 [inline]
 __x64_sys_symlink+0x59/0x80 fs/namei.c:4170
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457b67
Code: 0f 1f 00 b8 5c 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 6d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 b8 58 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 4d bb fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff045ce0f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000058
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 0000000000457b67
RDX: 00007fff045ce173 RSI: 00000000004bd63f RDI: 00007fff045ce160
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000013
R10: 0000000000000075 R11: 0000000000000202 R12: 0000000000000000
R13: 0000000000000001 R14: 000000000000029b R15: 0000000000000001

Allocated by task 24763:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:496 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
 kmalloc include/linux/slab.h:545 [inline]
 mISDN_open+0x9a/0x270 drivers/isdn/mISDN/timerdev.c:59
 misc_open+0x398/0x4c0 drivers/char/misc.c:141
 chrdev_open+0x247/0x6b0 fs/char_dev.c:417
 do_dentry_open+0x47d/0x1130 fs/open.c:771
 vfs_open+0xa0/0xd0 fs/open.c:880
 do_last fs/namei.c:3418 [inline]
 path_openat+0x10d7/0x4690 fs/namei.c:3534
 do_filp_open+0x1a1/0x280 fs/namei.c:3564
 do_sys_open+0x3fe/0x5d0 fs/open.c:1063
 __do_sys_openat fs/open.c:1090 [inline]
 __se_sys_openat fs/open.c:1084 [inline]
 __x64_sys_openat+0x9d/0x100 fs/open.c:1084
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 24762:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
 __cache_free mm/slab.c:3487 [inline]
 kfree+0xcf/0x230 mm/slab.c:3806
 mISDN_close+0x2a1/0x390 drivers/isdn/mISDN/timerdev.c:97
 __fput+0x2df/0x8d0 fs/file_table.c:278
 ____fput+0x16/0x20 fs/file_table.c:309
 task_work_run+0x14a/0x1c0 kernel/task_work.c:113
 tracehook_notify_resume include/linux/tracehook.h:188 [inline]
 exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:166
 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
 do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff88809fc18900
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 72 bytes inside of
 192-byte region [ffff88809fc18900, ffff88809fc189c0)
The buggy address belongs to the page:
page:ffffea00027f0600 count:1 mapcount:0 mapping:ffff88812c3f0040 index:0xffff88809fc18000
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea000269f648 ffffea00029f7408 ffff88812c3f0040
raw: ffff88809fc18000 ffff88809fc18000 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88809fc18800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88809fc18880: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88809fc18900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                              ^
 ffff88809fc18980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff88809fc18a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/x25: do not hold the cpu too long in x25_new_lci()

commit cf657d22ee1f0e887326a92169f2e28dc932fd10 upstream.

Due to quadratic behavior of x25_new_lci(), syzbot was able
to trigger an rcu stall.

Fix this by not blocking BH for the whole duration of
the function, and inserting a reschedule point when possible.

If we care enough, using a bitmap could get rid of the quadratic
behavior.

syzbot report :

rcu: INFO: rcu_preempt self-detected stall on CPU
rcu:    0-...!: (10500 ticks this GP) idle=4fa/1/0x4000000000000002 softirq=283376/283376 fqs=0
rcu:     (t=10501 jiffies g=383105 q=136)
rcu: rcu_preempt kthread starved for 10502 jiffies! g383105 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: RCU grace-period kthread stack dump:
rcu_preempt     I28928    10      2 0x80000000
Call Trace:
 context_switch kernel/sched/core.c:2844 [inline]
 __schedule+0x817/0x1cc0 kernel/sched/core.c:3485
 schedule+0x92/0x180 kernel/sched/core.c:3529
 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803
 rcu_gp_fqs_loop kernel/rcu/tree.c:1948 [inline]
 rcu_gp_kthread+0x956/0x17a0 kernel/rcu/tree.c:2105
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
NMI backtrace for cpu 0
CPU: 0 PID: 8759 Comm: syz-executor2 Not tainted 5.0.0-rc4+ #51
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101
 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62
 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38
 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
 rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1211
 print_cpu_stall kernel/rcu/tree.c:1348 [inline]
 check_cpu_stall kernel/rcu/tree.c:1422 [inline]
 rcu_pending kernel/rcu/tree.c:3018 [inline]
 rcu_check_callbacks.cold+0x500/0xa4a kernel/rcu/tree.c:2521
 update_process_times+0x32/0x80 kernel/time/timer.c:1635
 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161
 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271
 __run_hrtimer kernel/time/hrtimer.c:1389 [inline]
 __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451
 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509
 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline]
 smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
 </IRQ>
RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline]
RIP: 0010:queued_write_lock_slowpath+0x13e/0x290 kernel/locking/qrwlock.c:86
Code: 00 00 fc ff df 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 <41> 0f b6 55 00 41 38 d7 7c eb 84 d2 74 e7 48 89 df e8 6c 0f 4f 00
RSP: 0018:ffff88805f117bd8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000300 RBX: ffffffff89413ba0 RCX: 1ffffffff1282774
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89413ba0
RBP: ffff88805f117c70 R08: 1ffffffff1282774 R09: fffffbfff1282775
R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: 00000000000000ff
R13: fffffbfff1282774 R14: 1ffff1100be22f7d R15: 0000000000000003
 queued_write_lock include/asm-generic/qrwlock.h:104 [inline]
 do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203
 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline]
 _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312
 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267
 x25_bind+0x273/0x340 net/x25/af_x25.c:705
 __sys_bind+0x23f/0x290 net/socket.c:1505
 __do_sys_bind net/socket.c:1516 [inline]
 __se_sys_bind net/socket.c:1514 [inline]
 __x64_sys_bind+0x73/0xb0 net/socket.c:1514
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e39
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fafccd0dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39
RDX: 0000000000000012 RSI: 0000000020000240 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fafccd0e6d4
R13: 00000000004bdf8b R14: 00000000004ce4b8 R15: 00000000ffffffff
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8752 Comm: syz-executor4 Not tainted 5.0.0-rc4+ #51
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__x25_find_socket+0x78/0x120 net/x25/af_x25.c:328
Code: 89 f8 48 c1 e8 03 80 3c 18 00 0f 85 a6 00 00 00 4d 8b 64 24 68 4d 85 e4 74 7f e8 03 97 3d fb 49 83 ec 68 74 74 e8 f8 96 3d fb <49> 8d bc 24 88 04 00 00 48 89 f8 48 c1 e8 03 0f b6 04 18 84 c0 74
RSP: 0018:ffff8880639efc58 EFLAGS: 00000246
RAX: 0000000000040000 RBX: dffffc0000000000 RCX: ffffc9000e677000
RDX: 0000000000040000 RSI: ffffffff863244b8 RDI: ffff88806a764628
RBP: ffff8880639efc80 R08: ffff8880a80d05c0 R09: fffffbfff1282775
R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: ffff88806a7645c0
R13: 0000000000000001 R14: ffff88809f29ac00 R15: 0000000000000000
FS:  00007fe8d0c58700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32823000 CR3: 00000000672eb000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 x25_new_lci net/x25/af_x25.c:357 [inline]
 x25_connect+0x374/0xdf0 net/x25/af_x25.c:786
 __sys_connect+0x266/0x330 net/socket.c:1686
 __do_sys_connect net/socket.c:1697 [inline]
 __se_sys_connect net/socket.c:1694 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1694
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e39
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe8d0c57c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39
RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe8d0c586d4
R13: 00000000004be378 R14: 00000000004ceb00 R15: 00000000ffffffff

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Cc: linux-x25@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_nat_snmp_basic: add missing length checks in ASN.1 cbs

commit c4c07b4d6fa1f11880eab8e076d3d060ef3f55fc upstream.

The generic ASN.1 decoder infrastructure doesn't guarantee that callbacks
will get as much data as they expect; callbacks have to check the `datalen`
parameter before looking at `data`. Make sure that snmp_version() and
snmp_helper() don't read/write beyond the end of the packet data.

(Also move the assignment to `pdata` down below the check to make it clear
that it isn't necessarily a pointer we can use before the `datalen` check.)

Fixes: cc2d58634e0f ("netfilter: nf_nat_snmp_basic: use asn1 decoder library")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunrpc: fix 4 more call sites that were using stack memory with a scatterlist

commit e7afe6c1d486b516ed586dcc10b3e7e3e85a9c2b upstream.

While trying to reproduce a reported kernel panic on arm64, I discovered
that AUTH_GSS basically doesn't work at all with older enctypes on arm64
systems with CONFIG_VMAP_STACK enabled.  It turns out there still a few
places using stack memory with scatterlists, causing krb5_encrypt() and
krb5_decrypt() to produce incorrect results (or a BUG if CONFIG_DEBUG_SG
is enabled).

Tested with cthon on v4.0/v4.1/v4.2 with krb5/krb5i/krb5p using
des3-cbc-sha1 and arcfour-hmac-md5.

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>