Stefano Lattarini [Sat, 30 Jun 2012 19:32:20 +0000 (21:32 +0200)]
Merge branch 'maint'
* maint:
parallel-tests: "recheck" behaves better in case of compilation failures
scripts: quote 'like this', not `like this'
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 30 Jun 2012 18:20:22 +0000 (20:20 +0200)]
Merge branch 'recheck-fix' into maint
* recheck-fix:
parallel-tests: "recheck" behaves better in case of compilation failures
scripts: quote 'like this', not `like this'
Stefano Lattarini [Sat, 30 Jun 2012 17:46:13 +0000 (19:46 +0200)]
tests: prefer "test ! -e FILE" to check that a file doesn't exist
* t/autohdrdry.sh: Here, rather than using "test ! -r FILE".
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Jim Meyering [Sat, 30 Jun 2012 11:53:37 +0000 (13:53 +0200)]
texi: clean after Texinfo manuals in $(SUBDIRS) directories correctly
Fixes the regression exposed by previous commit 'v1.12.1-165-g498492f'.
* automake.in (handle_texinfo_helper): Add $infobase.{t2d,t2p}
to @mostly_cleans, but *without* the '$relative_dir/' prefix.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 30 Jun 2012 14:37:06 +0000 (16:37 +0200)]
coverage: regression in texinfo "make mostlyclean" with $(SUBDIRS)
After commit v1.12.1-91-g205c757 of 2012-06-20, "texi: require
Texinfo >= 4.9, related enhancements", the presence of a Texinfo manual
'manual.texi' in a subdir (say 'doc/') of a package using a recursive
make setup would cause "make distcheck" to fail, due to the presence of
the 'manual.t2d/' directory created by texi2dvi. That directory would
not be correctly removed because the 'mostlyclean' rule would run, from
within the 'doc/' sub-directory, "rm -rf doc/manual.t2d", instead of
the expected (and correct) "rm -rf manual.t2d".
Reported by Jim Meyering:
<http://lists.gnu.org/archive/html/automake-patches/2012-06/msg00203.html>
* t/txinfo21.sh: Enhance to expose the issue.
* t/txinfo-no-clutter.sh: Likewise, and other miscellaneous improvements.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 30 Jun 2012 11:42:10 +0000 (13:42 +0200)]
Merge branch 'maint'
* maint:
tests: fix a spurious failure
configure: fix detection of POSIX shell to work in a VPATH build
tests: prefer "test ! -e FILE" to check that a file doesn't exist
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 30 Jun 2012 10:12:43 +0000 (12:12 +0200)]
tests: fix a spurious failure
* t/parallel-tests-dry-run-2.sh: Here.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 30 Jun 2012 09:28:24 +0000 (11:28 +0200)]
configure: fix detection of POSIX shell to work in a VPATH build
* configure.ac: When checking whether "test -e" works, use 'config.log',
not 'configure', as the witness file, because the latter does not exist
in the current directory during a VPATH build.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 22:48:11 +0000 (00:48 +0200)]
tests: prefer "test ! -e FILE" to check that a file doesn't exist
Once, for the sake of (at least) Solaris 10 /bin/sh, we had to use
"test ! -f FILE" or "test ! -r FILE" or "test ! -d FILE" instead,
because the that shell's 'test' built-in didn't grok the '-e' option.
Note however that we still can't use "test ! -e" in the Makefile recipes
used in the test cases; that is because those recipes are run with the
shell detected by 'configure', and Autoconf-generated configure scripts
do no guarantee to find or provide a POSIX-compatible shell.
* Several tests: Adjust.
* t/yacc-clean-cxx: Adjust, and remove a couple of useless commands.
* t/parallel-tests-dry-run-2.sh: Adjust, and add invocation to
"make -n" forgotten in previous versions of the test.
* t/txinfo26.sh: Adjust, and don't bother to skip the test when it's
run in a directory whose absolute path contain whitespace: that setup
is not supported anyway.
* t/maken3.sh: Adjust, and fix a typo that could cause a minor false
negative.
* t/test-trs-recover2.sh: Prefer using 'skip_' with a suitable error
message over a bare 'exit 77'.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 21:35:18 +0000 (23:35 +0200)]
Merge branch 'maint'
* maint:
configure: move a misplaced "section" comment
configure: clump check for ${var%...} and ${var#...} expansion together
cosmetics: improve wording of a couple of configure messages
configure: the testsuite shell must support 'test -e' and 'test ! -e'
tests: remove stale workarounds for Solaris /bin/sh
Stefano Lattarini [Thu, 28 Jun 2012 21:32:21 +0000 (23:32 +0200)]
configure: move a misplaced "section" comment
* configure.ac (Create output files): This, move it towards the end
of the script.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 21:29:51 +0000 (23:29 +0200)]
configure: clump check for ${var%...} and ${var#...} expansion together
And together with those for the ${var%%...} and ${var##...} expansions.
After all, it is basically impossible to find a shell that support one
of them but not the others.
Suggestion by Eric Blake.
* configure.ac: Here.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 20:53:03 +0000 (22:53 +0200)]
cosmetics: improve wording of a couple of configure messages
* configure.ac: Fix a couple of messages so that the configure
output changes from this:
checking whether /bin/sh "set -e" preserves exit traps... yes
checking whether /bin/sh "set -x" corrupts stderr... no
to this:
checking whether /bin/sh preserves exit traps with "set -e"... yes
checking whether /bin/sh corrupts stderr with "set -x"... no
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 20:49:28 +0000 (22:49 +0200)]
configure: the testsuite shell must support 'test -e' and 'test ! -e'
* configure.ac: Require that the shell that is to be selected to run
the testsuite understands "set -e" and "set ! -e".
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 19:52:37 +0000 (21:52 +0200)]
tests: remove stale workarounds for Solaris /bin/sh
Our testsuite cannot be run with that shell anymore (as it is
not POSIX-compliant).
* t/tap-more.sh: Remove outdated workarounds for Solaris /bin/sh.
* t/self-check-exit.tap: Likewise.
* t/ansi2knr-no-more.sh: Likewise.
* t/add-missing.tap: Likewise.
* t/dist-auxfile.sh: Likewise.
* t/test-driver-custom-multitest-recheck2.sh: Likewise.
* t/ax/test-init.sh: Remove obsolete references to Solaris
/bin/sh.
* t/confh5.sh: Likewise.
* t/uninstall-fail.sh: Likewise. And update comments about
quirks of Solaris /bin/ksh and /usr/xpg4/bin/sh.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 16:38:02 +0000 (18:38 +0200)]
Merge branch 'maint'
* maint:
tests init: don't bother allowing '$me' to be overridable
tests init: typofixes in comments
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 16:21:33 +0000 (18:21 +0200)]
tests init: don't bother allowing '$me' to be overridable
We once used that feature in our wrapper tests; but now (and probably
even since commit 'v1.11-1308-g375f23d' of 2011-09-08, "testsuite:
revamp generation of autogenerated tests") it is not needed anymore.
By removing it we can simplify our growingly complex testsuite framework
a little.
* t/ax/test-inist.sh ($me): Do not initialize it here (and only if not
already set), instead ...
* defs-static.in ($me): ... initialize it here unconditionally.
Do not check anymore that $me doesn't come from the environment: that
wouldn't cause any problem now.
Now that '$me' is defined early, prefer it over 'argv0' in early error
messages, both here ...
* defs: ... and here.
* Makefile.am (AM_TESTS_ENVIRONMENT): Do not bother "nullifying" $me
anymore.
* t/self-check-env-sanitize.tap: Adjust.
* t/self-check-me.tap: Likewise.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 15:50:20 +0000 (17:50 +0200)]
tests init: typofixes in comments
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 15:41:27 +0000 (17:41 +0200)]
Merge branch 'maint'
* maint:
tests: one test was not executable, make it so
readme: fix typo in t/README: s/$((...)/$((...))/
tests: don't skip if $(abs_builddir) or $(abs_srcdir) contain whitespace
tests: avoid spurious maintainer-check failures
tests: remove obsolete hacks around maintainer-check false positives
Stefano Lattarini [Thu, 28 Jun 2012 15:40:10 +0000 (17:40 +0200)]
tests: one test was not executable, make it so
* t/subdir-order.sh: This test.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 15:32:15 +0000 (17:32 +0200)]
readme: fix typo in t/README: s/$((...)/$((...))/
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 15:08:34 +0000 (17:08 +0200)]
tests: don't skip if $(abs_builddir) or $(abs_srcdir) contain whitespace
We used to explicitly skip libtool and gettext tests if the absolute
path of the builddir or of the srcdir which Automake was configured
with contained any whitespace (or other metacharacters).
But several other tests would spuriously fail in such an unholy setup.
To be precise, it would cause 61 'FAIL's and 42 'ERROR's in the whole
Automake testsuite.
The fact that, as of today, nobody has reported any failure of this kind
means that (thankfully) nobody is building automake with $(abs_srcdir)
or $(abs_builddir) mangled by whitespace. So, instead of trying to cater
to such a broken setup consistently, we just drop the extra check in the
libtool/gettext tests.
In case someone will ever reports a failure due to extra whitespace in
either $(abs_srcdir) or or $(abs_builddir), we will simply enhance our
'configure.ac' to bail out flatly and loudly at such a setup.
* t/ax/test-init.sh: Simplify accordingly.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 14:43:43 +0000 (16:43 +0200)]
tests: avoid spurious maintainer-check failures
* t/ax/test-init.sh: Here, by adding extra quoting for two
occurrences of the string "perl".
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 12:35:12 +0000 (14:35 +0200)]
tests: remove obsolete hacks around maintainer-check false positives
* gen-testsuite-part, t/test-trs-recover.sh: Here.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 11:27:49 +0000 (13:27 +0200)]
Merge branch 'maint'
* maint:
tests: simpler workaround for shells losing the exit status in exit trap
+ Extra non-trivial edits:
* Several tests: Adjusted to use 'exit' rather than 'Exit'.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 11:05:29 +0000 (13:05 +0200)]
Merge branch 'simplify-exit-trap-workaround' into maint
* simplify-exit-trap-workaround:
tests: simpler workaround for shells losing the exit status in exit trap
+ Extra non-trivial edits:
* t/am-missing-prog.sh: Use 'exit, not 'Exit'.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 09:20:43 +0000 (11:20 +0200)]
cosmetics: remove trailing whitespace in some files
* lib/missing, t/comment7.sh, t/objc-flags.sh, t/objcxx-flags.sh,
t/perf/testsuite-summary.sh, t/self-check-explicit-skips.sh: Here.
Prompted by a report from Karl Berry.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 09:09:05 +0000 (11:09 +0200)]
coverage: enhance tests in 'missing' script a little
* t/am-missing-prog.sh: Here, by also verifying its expected
exit status.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 08:59:45 +0000 (10:59 +0200)]
Merge branch 'maint'
* maint:
coverage: tests AM_MISSING_PROG usage
docs: document AM_MISSING_PROG
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 28 Jun 2012 08:55:13 +0000 (10:55 +0200)]
coverage: tests AM_MISSING_PROG usage
Now that AM_MISSING_PROG is documented, we want to make sure it
works as expected when used in third-party code.
* t/am-missing-prog.sh: New test.
* t/ammissing: Rename ...
* t/am-macro-not-found.sh: ... like this, to avoid confusion (this
test has nothing to do with the 'missing' script nor with the
'AM_MISSING_PROG' macro).
* t/list-of-tests.mk: Adjust.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Eric Blake [Wed, 27 Jun 2012 21:55:14 +0000 (15:55 -0600)]
docs: document AM_MISSING_PROG
Addresses automake bug#11793.
This macro has been present for a long time, and coreutils has been
relying on it despite no documentation, which argues that it is stable
enough to be worth documenting.
Furthermore, since we are hoping to change our preferred invocation
from 'missing --run program' to 'missing program' in a future version
of automake, we need a way for packages to consistently get the
preferred invocation form rather than open-coding a call to 'missing'.
In particular, the Autoconf manual would love to recommend this macro
when discussing how to integrate an autotest suite with automake.
* doc/automake.texi (Public Macros): Document AM_MISSING_PROG.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Wed, 27 Jun 2012 13:29:42 +0000 (15:29 +0200)]
Merge branch 'maint'
* maint:
tests: fix a spurious failure with Solaris make
tests: avoid several spurious failures on Solaris
tests: avoid a spurious failure on NetBSD
Stefano Lattarini [Wed, 27 Jun 2012 13:07:03 +0000 (15:07 +0200)]
tests: fix a spurious failure with Solaris make
* t/subdir-order.sh: Run make in parallel only if the make implementation
truly supports it.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Wed, 27 Jun 2012 10:47:17 +0000 (12:47 +0200)]
parallel-tests: "recheck" behaves better in case of compilation failures
With this change, the "recheck" target behaves better in the face of build
failures related to previously failed tests. For example, if a test is a
compiled program that must be rerun by "make recheck", and its compilation
fails, that test will still be rerun by further "make recheck" invocations.
Previously, its '.log' and '.trs' would have both been lost, so that the
test would have not been re-run.
This change fixes automake bug#11791.
* NEWS: Update.
* lib/am/check.am (recheck, check-TESTS): Adjust to cater to scenario
described above.
* t/parallel-tests-recheck-pr11791.sh: New test.
* t/list-of-tests.mk: Add it.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Wed, 27 Jun 2012 09:13:54 +0000 (11:13 +0200)]
scripts: quote 'like this', not `like this'
* lib/test-driver.sh: Here.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Tue, 26 Jun 2012 18:16:21 +0000 (20:16 +0200)]
Merge branch 'missing-not-touch-just-warn'
* missing-not-touch-just-warn:
missing: --run is supported again (as a no-op) for use by older automake
Eric Blake [Tue, 26 Jun 2012 16:40:39 +0000 (10:40 -0600)]
missing: --run is supported again (as a no-op) for use by older automake
Commit v1.12.1-87-ga22717d of 2012-06-21 ("missing: do not touch
timestamps; only warn for out-of-date files") has removed the '--run'
option, since our new preferred calling conventions now imply it; but
if a newer 'missing' is mixed with an already built project that used
an older Automake version (this happened in practice for GNU m4; see:
<http://lists.gnu.org/archive/html/bug-m4/2012-06/msg00001.html>), then
the 'Makefile' in that project will fail due to passing the '--run'
option when trying to bring the project up-to-date.
* lib/missing: Parse and ignore '--run'.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Mon, 25 Jun 2012 08:40:39 +0000 (10:40 +0200)]
Merge branch 'missing-not-touch-just-warn'
* missing-not-touch-just-warn:
missing: don't cater to 'configure.in' in our advice
missing: better tips about missing tools
Stefano Lattarini [Mon, 25 Jun 2012 08:38:58 +0000 (10:38 +0200)]
missing: don't cater to 'configure.in' in our advice
The use of 'configure.in' as autoconf input now deprecated the development
versions of both Automake and Autoconf, and we'd like to speed up its
demise.
* missing: In the advice displayed in case some autotools are detected to
be missing, refer to 'configure.ac' unconditionally, instead of referring
to 'configure.in' when that file exists in the current directory (and no
'configure.ac' does).
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sun, 24 Jun 2012 08:36:15 +0000 (10:36 +0200)]
tests: simpler workaround for shells losing the exit status in exit trap
Now that we can assume our tests are run by a decent POSIX shell, we
can simplify our workaround aimed at having the exit status propagated
correctly to the code in the exit trap. Unfortunately, we cannot
dispense with such a workaround altogether, because it's still required
by some shells we need to support (at least Solaris 10 /bin/ksh and
/usr/xpg4/bin/sh).
For more information about the need of that workaround, see the entry
about 'trap' in the section "Limitations of Shell Builtins" in the
Autoconf manual:
<http://www.gnu.org/software/autoconf/manual/autoconf.html#trap>
The new workaround has been tested successfully with the following
shells:
- Bash 4.1
- Bash 3.2
- Bash 3.0
- Bash 2.05b
- dash 0.5.5.1
- dash 0.5.2
- AT&T Ksh 93u (from official Debian package)
- MirBSD Korn Shell 40.2 (from official Debian package)
- Solaris 9, 10 and 11 /bin/ksh
- Solaris 9, 10 and 11 /usr/xpg4/bin/sh
- NetBSD 5.1 /bin/sh
- NetBSD 5.1 /bin/ksh
* t/ax/test-init.sh (Exit): Rename ...
(_am_exit): ... like this.
(exit): New alias for '_am_exit'. We cannot simply redefine 'exit'
as a shell function, because some shells (dash 0.5.5.1, Solaris 10
/bin/ksh and /usr/xpg4/bin/sh) do not allow it.
(_am_exit, trap): Add extra escaping for 'exit' calls, to ensure we
really invoke the 'exit' builtin and not our alias with the same
name.
* configure.ac: Check that the shell selected to run our testsuite
supports aliases named like shell builtins.
* t/REAMDE: Adjust.
* All tests: Adjust, by simply using 'exit' instead of 'Exit'.
* t/self-check-explicit-skips.sh: Adjust: the first usage of 'exit'
after it has been redefined as an alias must be on a new line w.r.t.
that where the alias is defined, in order for the redefinition to be
honored.
* syntax-checks.mk (sc_tests_Exit_not_exit): Delete.
(sc_tests_exit_not_Exit): New.
(syntax_check_rules): Adjust.
(sc_tests_automake_fails): Simplify the recipe a little.
* Several tests: Remove now useless spurious quoting once required
to placate the 'sc_tests_Exit_not_exit' maintainer check.
* gen-testsuite-part: Likewise. Also, avoid uses of 'Exit' in the
generated scripts.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sun, 24 Jun 2012 15:57:10 +0000 (17:57 +0200)]
tests: avoid several spurious failures on Solaris
* t/ax/is_newest: Rewrite to be Bourne-compatible, for /bin/sh shells like
Solaris' that are not POSIX-conforming. The script is so small that such
a rewrite is easier than going through the hoops that would be required to
ensure this script is always executed with a POSIX shell.
* t/ax/is: Add a comment stating that this script is to be kept Bourne
compatible as well.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sun, 24 Jun 2012 14:52:51 +0000 (16:52 +0200)]
tests: avoid a spurious failure on NetBSD
* t/maken.sh: Do not expect the timestamp of the current directory
to be unchanged after a "make -n".
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sun, 24 Jun 2012 08:12:43 +0000 (10:12 +0200)]
Merge branch 'maint'
* maint:
tests: fix automatic re-execution of tests with Zsh
tests: drop support for older Zsh shells
tests: allow AM_TEST_RUNNER_SHELL to be overridden
tests: fix setup for older Zsh
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 23 Jun 2012 11:42:10 +0000 (13:42 +0200)]
tests: fix automatic re-execution of tests with Zsh
* defs: Use '$argv0' instead of '$0'. With Zsh not started right
away in Bourne-compatibility mode, the latter will be the path not
of the test script itself, but of the file it's currently sourcing
-- i.e., in our case, './defs'. This would cause the automatic
re-execution code to execute './defs' (basically a no-op) rather
than re-run the test correctly.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 23 Jun 2012 09:16:08 +0000 (11:16 +0200)]
tests: drop support for older Zsh shells
* defs-static.in: Here. The fact that such support has been broken for
almost a year (only fixed by today's commit 'v1.12.1-57-gf1e0300'),
causing no bug reports from anyone, shows that such support is not truly
warranted. And it will get in the way of future improvements in the
handling of the exit trap (because bugs in older Zsh versions will
prevent some of our planned improvements). So just drop it.
* t/README: Remove obsolete advice for working around bugs in older
versions of Zsh; instead, indicate version 4.3 is the oldest Zsh now
supported.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 23 Jun 2012 08:39:33 +0000 (10:39 +0200)]
tests: allow AM_TEST_RUNNER_SHELL to be overridden
* defs-static.in: Here. This will make it easier for the maintainer
to run some self checks (like those in 't/self-check-exit.tap') with
different shells, to look for possible portability problems. Fix a
typo (doubled "the") while we are at it.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 23 Jun 2012 08:34:29 +0000 (10:34 +0200)]
tests: fix setup for older Zsh
* defs-static.in: After the addition of TAP-based tests and our renaming
of "simple" test scripts from 'tests/foo.test' to 't/foo.sh', a test name
is valid if it matches the wildcard "*.sh" or "*.tap", not the wildcard
"*.test". Adjust accordingly.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 23 Jun 2012 07:04:46 +0000 (09:04 +0200)]
missing: better tips about missing tools
* lib/missing: Try to point the user to the home page of such tools
where possible. Also, make clear that some tools (e.g., aclocal or
autoheader) are distributed as part of bigger projects (resp. automake
and autoconf, in those cases). While at it, refactor and re-format
the existing code heavily, in particular introducing
(give_advice): ... this new function in the process.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 22:32:30 +0000 (00:32 +0200)]
Merge branch 'missing-not-touch-just-warn'
* missing-not-touch-just-warn:
missing: do not touch timestamps; only warn for out-of-date files
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 22:16:26 +0000 (00:16 +0200)]
Merge branch 'maint'
* maint:
tests: avoid one last `...` command substitution in 'test-init.sh'
maintcheck: guard against `...` for command substitution in test cases
tests: more uses of $(...) over `...` for command substitution
cosmetics: quote `like this', not 'like this', in a couple of tests
readme: clarify/extend few entries in 't/README'
readme: better separation of entries in 't/README'
readme: subsections "Do" and "Do not" in 't/README' merged
tests: new requirement 'grep-nonprint'
cosmetics: fix description of an expected error message in a test
tests: assume automake quotes 'like this', not `like this'
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 22:12:08 +0000 (00:12 +0200)]
tests: avoid one last `...` command substitution in 'test-init.sh'
* t/ax/test-init.sh (me): In the definition of this variable. This
also shave off a couple of forks, and the need for a sanity check
only required in fringe situations.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 22:06:10 +0000 (00:06 +0200)]
maintcheck: guard against `...` for command substitution in test cases
But still allow them in configure.ac, Makefile.am and shell scripts
created or used inside test cases itself, because Autoconf (as of
version 2.69) does not yet ensure that $CONFIG_SHELL will be set to
a proper POSIX shell.
* syntax-checks.mk (sc_tests_command_subst): New check.
(syntax-check_rules): Add it.
* t/tap-global-log.sh: Minimal tweakings to avoid triggering the
new maintainer check.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 21:31:00 +0000 (23:31 +0200)]
tests: more uses of $(...) over `...` for command substitution
Somehow missed by the previous changes. No big deal, fix them now.
* t/ax/depcomp.sh: Here.
* t/autodist.sh: And here.
* t/autodist-no-duplicate.sh: And here.
* t/autodist-subdir.sh: Ad here.
* t/remake11.sh t/self-check-me.tap: And here.
* t/perf/testsuite-summary.sh: And here.
* t/perf/testsuite-recheck.sh: And here.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 21:18:54 +0000 (23:18 +0200)]
cosmetics: quote `like this', not 'like this', in a couple of tests
* t/ansi2knr-no-more.sh: Here.
* t/aclocal-verbose-install.sh: And here.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 21:14:38 +0000 (23:14 +0200)]
readme: clarify/extend few entries in 't/README'
* t/README (Writing test cases): Here.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 21:06:55 +0000 (23:06 +0200)]
readme: better separation of entries in 't/README'
* t/README (Writing test cases): Prepend different entries with a '*'
character acting like a bullet in a list. This make different entries
better separated, visually-wise. Minor related reformatting.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 21:01:37 +0000 (23:01 +0200)]
readme: subsections "Do" and "Do not" in 't/README' merged
* t/README (Writing test cases): Merge subsections "Do" and "Do not".
The distinction was rather artificial, and more confusing than helpful.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 20:31:35 +0000 (22:31 +0200)]
tests: new requirement 'grep-nonprint'
* t/ax/test-inist.sh ($esc): New, a literal escape character.
(grep-nonprint): New requirement, check that the grep implementation
available that can handle non-printing characters correctly.
* t/color.sh: Use it instead of hand-rolled equivalent, and do not
(re)define '$esc' explicitly.
* t/color2.sh: Likewise.
* t/tap-color.sh: Likewise.
* t/vtexi4.sh: Likewise.
* t/parallel-tests-no-color-in-log.sh: Likewise. Also prefer the use
of grep over that of $FGREP, because the new requirement only check
grep, and ensure we only grep non-printing characters from a pipe, to
avoid hitting a BSD grep limitation.
* t/parallel-tests-reset-term.sh: Likewise.
* t/ax/tap-summary-aux.sh: Use '$esc' instead of hard-coding the
literal escape character.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 19:59:26 +0000 (21:59 +0200)]
cosmetics: fix description of an expected error message in a test
* t/vartypo2.sh: Here. This reflects the change from `this style'
of quoting to 'this style'.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 19:44:15 +0000 (21:44 +0200)]
tests: assume automake quotes 'like this', not `like this'
* t/add-missing.tap: Here. This slightly simplifies and/or enhances
some grepping checks on automake diagnostic.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 16:55:01 +0000 (18:55 +0200)]
Merge branch 'maint'
* maint:
tests: prefer using 'is_newest' over 'ls -t' hacks
tests: implement is_newest as an auxiliary script, not shell function
tests: fix some spurious failures in VPATH setup
tests: work in VPATH setup again
Stefano Lattarini [Fri, 22 Jun 2012 16:15:21 +0000 (18:15 +0200)]
tests: prefer using 'is_newest' over 'ls -t' hacks
To verify that a file 'new' is newer than the file 'old', it's much
cleaner to use "is_newest new old" rather than the more clumsy
"ls -t". Adjust several of our tests accordingly.
* syntax-checks.mk (sc_tests_ls_t): New check, guard against uses
of "ls -t" and similar.
(syntax_check_rules): Add it.
* t/maken.sh: Adjust.
* t/autohdr4.sh: Likewise.
* t/extradep2.sh: Likewise.
* t/lex-depend-cxx.sh: Likewise.
* t/extradep.sh: Likewise.
* t/yacc-depend2.sh: Likewise.
* t/yacc-pr204.sh: Likewise.
* t/lex-pr204.sh: Likewise.
* t/yacc8.sh: Likewise.
* t/acloca13.sh: Likewise.
* t/lex-depend.sh: Likewise, and enhance.
* t/acloca14.sh: Likewise.
* t/aclocal7.sh: Likewise.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 14:18:28 +0000 (16:18 +0200)]
tests: implement is_newest as an auxiliary script, not shell function
This will allow to also use it in the makefile recipes used in our
test cases.
* t/ax/test-init.sh (is_newest): Remove.
* t/ax/is_newest: New script.
* Makefile.am (EXTRA_DIST): Add it.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 13:34:12 +0000 (15:34 +0200)]
tests: fix some spurious failures in VPATH setup
* t/self-check-cleanup.tap: No need to copy the 'ax/t/test-init.sh'
file over in our temporary directory.
* t/self-check-reexec.tap: Likewise.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 13:14:20 +0000 (15:14 +0200)]
tests: work in VPATH setup again
* defs: Drop overly paranoid sanity checks that was causing all the tests
to fail spuriously when run in a VPATH setup, with a message like:
"../t/nodef.sh: ./t/ax/test-init.sh: not found in current directory".
Those checks looked for invariants that, even if broken, would still
cause the test to fail very early and with a pretty clear error message
anyway.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 12:52:21 +0000 (14:52 +0200)]
Merge branch 'maint'
* maint:
tests: automatic re-execution works for non-POSIX shells too
tests: use more POSIX shell features our test scripts
+ Extra non-trivial edits:
* t/ax/test-init.sh: Apply the diffs between past versions of
'defs' in maint and in master; i.e., remove handling of $required
entries 'texi2dvi-o' and 'makeinfo-html', and adjust to the fact
that the parallel testsuite harness is now the default.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 22 Jun 2012 09:40:39 +0000 (11:40 +0200)]
tests: automatic re-execution works for non-POSIX shells too
Some inferior shells are too greedy in parsing their input. If a
non-POSIX Bourne shell (like Solaris 10 /bin/sh) was used to launch
one of our test scripts, it would fail unconditionally, because it
unexpectedly saw some (by it) unsupported constructs, notwithstanding
such constructs being placed *after* the code implementing automatic
test re-execution with a better shell. In conclusion, the shell
bailed out like this:
$ /bin/sh t/ar.sh
$ t/ar.sh: syntax error at line 257: `is_newest_files=$' unexpected
By moving all the potentially problematic code in a separate file, to
be sourced only after the code for automatic re-execution with a better
shell, we ensure that inferior shell cannot see such code by mistake.
* defs: All code after automatic shell re-execution moved out ...
* t/ax/test-init.sh: ... to this new file.
* syntax-checks.mk (xdefs): Add it.
* Makefile.am (dist_check_DATA): Add it. Also move in 'defs' from
a less explicit 'check_DATA' declaration.
(nodist_check_DATA): Move in 'defs-static' from a less explicit
'check_DATA' declaration.
(check_DATA): Remove.
* t/self-check-sanity.sh: Remove, it was actually too hacky and brittle,
sanity-checking situations we don0t actually care about.
* t/list-of-tests.mk: Adjust.
* t/self-check-explicit-skips.sh: Adjust, and fix a botched heading
comments while we are at it.
* t/self-check-reexec.tap: Adjust.
* t/self-check-cleanup.tap: Likewise.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 14 Jun 2012 11:13:58 +0000 (13:13 +0200)]
tests: use more POSIX shell features our test scripts
Since commit 'v1.12-36-g2d68fd9' of 2012-05-07, "configure: search a
sturdy POSIX shell to be used in the testsuite", the shell running
our test script is assured to be a POSIX-conforming shell, so we can
use the more modern and flexible idioms and features that we couldn't
use when we also aimed at compatibility with non-POSIX Bourne shells,
like Solaris /bin/sh.
* t/README: Suggest to use POSIX shell features liberally in test cases,
with possible exception of Makefile recipes and configure shell code.
* Several tests: Adjust to use more POSIX shell features; e.g., $(...)
rather than `...`, $((...)) rather than `expr ...`, "if ! CMD; then ..."
instead of "if CMD; then :; else ...", and so on.
In several places, when using the 'test' built-in, prefer '-eq' over
'=' for numeric comparisons, and prefer "grep -c PATTERN FILE" over
"grep PATTERN FILE | wc -l".
Throw in other low-hanging easy improvements and fixlets while we are
at it.
* t/ax/depcomp.sh, t/ax/tap-summary-aux.sh, t/ax/tap-functions.sh,
defs, defs-static.in: Likewise.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 21 Jun 2012 11:15:05 +0000 (13:15 +0200)]
Merge branch 'maint'
* maint:
docs: avoid failures with development version of Texinfo (4.13.90)
typofix: s/test derivers/test drivers/ in check.am comments
typofix: s/env/even/ in comments in GNUmakefile
Stefano Lattarini [Thu, 21 Jun 2012 11:13:04 +0000 (13:13 +0200)]
docs: avoid failures with development version of Texinfo (4.13.90)
* doc/automake-history.texi: Use '@item' instead of '@itemx' where
appropriate.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 15 Jun 2012 09:13:00 +0000 (11:13 +0200)]
missing: do not touch timestamps; only warn for out-of-date files
Before this change, the missing script had a twofold role:
- it warned the user if some required maintainer tools was missing,
or too old;
- in such a case, it tried to "fix" the timestamp of the files that
should have been rebuilt by that tool (without actually updating
the file contents, of course), to allow the build to continue.
The second capability used to be quite useful in the days when most
projects committed files generated by maintainer-only tools in their
VCS repository (today the trend is not to keep such generated files
VCS-committed anymore). In such a setup, the "timestamp-fixing"
capability of 'missing' was quite useful, in that it allowed users
lacking some required maintainer tool to build from a VCS checkout
in the face of skewed timestamps (as could have been caused by
"cvs update" or "git checkout").
But then, when the automatic remake rules kicked in due to the
generated files being *actually out-of-date* (e.g., because the user
had modified 'configure.ac' but lacked a modern-enough autoconf to
rebuild it), that behaviour of 'missing' caused the same problem that
plagued AM_MAINTAINER_MODE; i.e., the user would get non-dependable
builds and inconsistent statuses of the build tree -- changes to
source files don't reflect on generated files, and this can be very
confusing and cause hard-to-spot errors).
So we now believe that the best approach to deal with timestamp-related
issues is not to have 'missing' to "automagically" try to resolve
them (with all the risk and brittleness entailed), but rather to
suggest those projects still keeping generated files committed in their
VCS to provide a proper (say) 'fix-timestamp.sh' script that touches
the timestamp of the checked-out files, to ensure no spurious rebuild
will be triggered. As a bonus, such a script can be more aware of the
particularities, nooks and corner cases of a project, and thus more
reliable than the old 'missing' script.
An example of this approach is offered by GNU awk (release 4.0.1, Git
tag 'gawk-4.0.1', commit
b85b04e8). The GNU awk maintainers commit
the Autotools-generated files (configure, Makefile.in, etc.) and other
generated in the project's Git repository, but offer a useful script
'bootstrap.sh' that fixes the timestamps of those files, to ensure no
useless remake is triggered in a freshly cloned repository:
#! /bin/sh
# bootstrap.sh --- touch relevant files to avoid out-of-date issues
# in Git sandboxes
touch aclocal.m4
find awklib -type f -print | xargs touch
sleep 1
touch configure
sleep 2
touch configh.in
sleep 1
touch test/Maketests
find . -name Makefile.in -print | xargs touch
touch doc/*.info
touch po/*.gmo
touch po/stamp-po
touch awkgram.c
touch command.c
touch version.c
A similar, simplified script is also reported as an example in the
manual.
* NEWS: Update.
* doc/automake.texi (Auxiliary Programs, maintainer-mod): Update.
(CVS): Do not suggest that 'missing' can "automagically" fix botched
timestamp due to a "cvs update"; this isn't true anymore. Give an
example of a custom 'fix-timestamp.sh' script that can be used to
obtain the same effect (in a slightly more laborious but also more
explicit and less brittle way). Fix some minor typos and improper
wordings while we are at it.
* lib/missing: Basically rewritten to implement the new semantics.
As a side effect (one of the several), the '--run' option is no more
required nor recognized.
* m4/missing.m4 (AM_MISSING_HAS_RUN): Enhance the test on '$MISSING'
to ensure it actually provides the new semantics (by trying the new
"witness" option '--is-lightweight').
* lib/am/distdir.am (distdir): No need anymore to check for "bad"
distributed man pages that were actually dummy stubs generated by
the 'missing' script.
* t/missing4.sh: Rename ...
* t/remake-aclocal-version-mismatch.sh: ... like this.
* t/missing2.sh: Rename ...
* t/missing-version-mismatch.sh: ... like this, and adjust to the
new semantics.
* t/missing3.sh: Adjust to the new semantics.
* t/man4.sh: Remove as obsolete.
* t/missing.sh: Likewise.
* t/missing5.sh: Likewise.
* t/txinfo30.sh: Likewise.
* t/man6.sh: Adjust grepping checks.
* t/remake6.sh: Likewise.
* t/list-of-tests.mk: Adjust.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 21 Jun 2012 09:43:54 +0000 (11:43 +0200)]
typofix: s/test derivers/test drivers/ in check.am comments
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Wed, 20 Jun 2012 21:32:44 +0000 (23:32 +0200)]
typofix: s/env/even/ in comments in GNUmakefile
Spotted by Eric Blake.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Wed, 20 Jun 2012 16:35:57 +0000 (18:35 +0200)]
Merge branch 'maint'
* maint:
bootstrap: overhaul and improve
docs: quote 'like this', not `like this'
Stefano Lattarini [Wed, 20 Jun 2012 16:28:02 +0000 (18:28 +0200)]
bootstrap: overhaul and improve
This fixes several weaknesses and buglets in the 'bootstrap' convenience
target offered in GNUmakefile (and its supporting code). Refer to the
extensive code comments in there for more details.
* GNUmakefile: Almost completely rewritten.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Wed, 20 Jun 2012 15:27:57 +0000 (17:27 +0200)]
docs: quote 'like this', not `like this'
* doc/automake.texi: Fix the reported warnings and informative messages
from automake to quote 'like this' rather than as `like this'. Do the
same for comments and some text in our examples.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Wed, 20 Jun 2012 12:23:28 +0000 (14:23 +0200)]
fixup: tests: special requirement 'makeinfo-html' removed from ./defs
This should have ideally been part of earlier commit v1.12.1-93-g3c64d54.
* defs (makeinfo-html): Remove.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Wed, 20 Jun 2012 11:49:18 +0000 (13:49 +0200)]
maintcheck: guard against obsolete $required entries
* syntax-check.mk: Add rules guarding against the use of the
obsolete test requirements 'texi2dvi-o' and 'makeinfo-html'.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Wed, 20 Jun 2012 10:27:11 +0000 (12:27 +0200)]
tests: drop requirement 'makeinfo-html'; 'makeinfo' is enough
* defs: Since we now require Texinfo 4.9 or later in the Automake
generated Makefiles, and since the '--html' option of makeinfo, as
well as its capability to generate HTML output, has been supported
since Texinfo 4.0 (according to the Texinfo NEWS file), the
requirement 'makeinfo-html' is obsolete -- the simpler requirement
'makeinfo' is enough.
* t/instdir-texi.sh ($required): Adjust by using simply 'makeinfo'
instead of 'makeinfo-html'.
* t/silent8.sh: Likewise.
* t/txinfo21.sh: Likewise.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Wed, 20 Jun 2012 09:52:20 +0000 (11:52 +0200)]
tests: drop requirement 'texi2dvi-o'; 'texi2dvi' is enough
* defs: Since we now require Texinfo 4.9 or later in the Automake
generated Makefiles, and since the '-o' option of texi2dvi has been
supported since Texinfo 4.1, the requirement 'texi2dvi-o' is
obsolete -- the simpler requirement 'texi2dvi' is enough.
* t/silent8.sh ($required): Adjust by using simply 'texi2dvi'
instead of 'texi2dvi-o'
* t/txinfo-no-clutter.sh: Likewise.
* t/txinfo13.sh: Likewise.
* t/txinfo23.sh: Likewise.
* t/txinfo24.sh: Likewise.
* t/txinfo25.sh: Likewise.
* t/txinfo28.sh: Likewise.
* t/txinfo33.sh: Likewise.
* t/vtexi4.sh: Likewise.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sun, 17 Jun 2012 10:23:18 +0000 (12:23 +0200)]
texi: require Texinfo >= 4.9, related enhancements
We start passing the '--build-dir' option to the texi2dvi and texi2pdf
invocations done in our Texinfo-related rules. The argument for this
option will be specific for each info_TEXINFOS entry, to work around a
texi2dvi bug that could otherwise cause racy failures in parallel make
builds:
<http://lists.gnu.org/archive/html/automake-patches/2012-06/msg00073.html>
That bug seems already fixed in the development version of texi2dvi,
though:
<http://lists.gnu.org/archive/html/automake-patches/2012-06/msg00074.html>
so the details of our '--build-dir' usage can be revisited once we can
assume Texinfo 5.0 or later.
Since the '--build-dir' options has been only supported since Texinfo
4.9, we lose compatibility with all older Texinfo versions.
But we also get some real improvements.
First, the '--build-dir' option implies the '--tidy' option; this, like
the '--clean' option that we were formerly using, prevents cluttering of
the build directory with all the TeX and Texinfo auxiliary files and
build by-products, but, differently from '--clean', keeps them around
for later re-runs to use; this shortens the rebuild times considerably.
Second, the use of '--build-dir' also allows us to specify different
build directories for the PDF and DVI output, preventing the rules
building them from stomping on each other's feet when run in parallel.
This is demonstrated by the test cases 'txinfo-no-clutter.sh' and
'txinfo33.sh', which before this change used to fail when run with
MAKE="make -j4", but now succeed even in that case.
* NEWS: Update.
* lib/am/texibuilds.am: Do not try to avoid texi2dvi/texi2pdf option
'-o'; it has been supported since Texinfo 4.1, and we now require
Texinfo >= 4.9. Remove an obsolete comment. Modify calls to texi2dvi
and texi2pdf to use the '--build-dir' option, so that TeX auxiliary
files and build by-products for a 'foo.texi' input will be placed in
a 'foo.t2d' directory (for texi2dvi) or in a 'foo.t2p' directory (for
texi2pdf).
* automake.in (scan_texinfo_file): Greatly simplify the implementation,
since we don't need anymore to keep track of the TeX auxiliary files and
build by-products to clean. Drop the '@CLEAN_FILES' part of the return
value.
(handle_texinfo_helper): Adjust the 'scan_texinfo_file()' call to its
new signature. Append the "work directories" now created by texi2dvi
and texi2pdf invocation to the list of files/directories removed upon
"make mostlyclean".
* lib/am/texinfos.am: Update the cleaning rules (and comments)
accordingly.
* t/txinfo-no-clutter.sh: Minimal adjustment to avoid spurious failures.
* .gitignore: Update.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Sat, 16 Jun 2012 07:16:53 +0000 (09:16 +0200)]
docs: it's not true that DISTCHECK_CONFIGURE_FLAGS is maintainer-reserved
At least, not anymore since commit 'v1.11-372-g9760039' of 2001-06-10,
"distcheck: add support for AM_DISTCHECK_CONFIGURE_FLAGS". See also
automake bug#8784.
* doc/automake.texi (Flag Variables Ordering): Do not report
'DISTCHECK_CONFIGURE_FLAGS' as a "variables that are only useful
to the maintainer that has no user counterpart": now it is a
user-reserved variable, its maintainer-reserved counterpart
being 'AM_DISTCHECK_CONFIGURE_FLAGS' .
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 15 Jun 2012 13:07:05 +0000 (15:07 +0200)]
Merge branch 'am-preprocess-drop-tricky-transform'
* am-preprocess-drop-tricky-transform:
automake: stop supporting "%KEY?iftrue:iffalse%" transforms
am: stop using "%KEY:iffalse?iftrue%" transforms
Stefano Lattarini [Fri, 15 Jun 2012 08:27:27 +0000 (10:27 +0200)]
Merge branch 'maint'
* maint:
tests: minor reorganization of few tests
fixup: adjust t/list-of-tests.mk for renamed/added tests
subdirs: enhance coverage, tweak and rename few tests
sync: update files from upstream with "make fetch"
py-compile: consistently quote 'like this', not `like this'.
docs: recursive make considered harmful
docs: clean rules are not run in reverse order of build rules anymore
silent: new $(AM_V_P) variable, tell if we're running in silent mode
refactor: silent rules handling (a little)
refactor: &define_verbose_var: accept a third optional argument
+ Extra non-trivial edits:
These are due to the fact that support for silent rules is enabled
unconditionally these days (since commit 'v1.12-34-g14141f2' of
2012-05-01, "silent rules: support for them is always active now").
* automake.in: In the new silent related code, do not ever check
whether the 'silent-rules' option is active; just assume support
for silent rules is enabled.
* t/silent-obsolescent-warns.sh: Remove as obsolete.
* t/list-of-tests.mk: Adjust.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Fri, 15 Jun 2012 08:09:19 +0000 (10:09 +0200)]
Merge branch 'docs-recursion' into maint
* docs-recursion:
docs: recursive make considered harmful
Stefano Lattarini [Fri, 15 Jun 2012 08:09:04 +0000 (10:09 +0200)]
Merge branch 'silent-custom' into maint
* silent-custom:
silent: new $(AM_V_P) variable, tell if we're running in silent mode
refactor: silent rules handling (a little)
refactor: &define_verbose_var: accept a third optional argument
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 14 Jun 2012 21:45:08 +0000 (23:45 +0200)]
automake: stop supporting "%KEY?iftrue:iffalse%" transforms
And the similar "reduced forms" "%KEY:iffalse%" and "%KEY?iftrue%"
as well.
They are convoluted, never used (after the previous change), and will
get in the way in the Automake-NG branch, where we'll soon want to use
GNU make static pattern rules in our internal '*.am' fragments.
* automake.in (preprocess_file, transform): Simplify not to support
those transform patterns.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 14 Jun 2012 21:41:58 +0000 (23:41 +0200)]
am: stop using "%KEY:iffalse?iftrue%" transforms
And the similar "reduced forms" "%KEY:iffalse%" and "%KEY?iftrue%"
as well.
They are harder to grasp, can be easily reformulated in function of
other "plainer" transforms ("?KEY?" and "?!KEY?"), and we'll remove
support for them anyway in a later change.
* lib/am/data.am, lib/am/libs.am, lib/am/lisp.am, lib/am/ltlib.am,
lib/am/progs.am, lib/am/python.am, lib/am/scripts.am: Adjusted not
to rely on those kinds of transforms.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 14 Jun 2012 21:27:42 +0000 (23:27 +0200)]
tests: minor reorganization of few tests
* t/subdir3.sh: Rename ...
* t/sourcefile-in-subdir.sh: ... like this.
* t/subdir4.sh: Rename ...
* t/depcomp-implicit-auxdir.sh: ... like this.
* t/subdir6.sh: Rename ...
* t/confh-subdir-clean.sh: ... like this.
* t/subdir7.sh: Renamed ...
* t/dir-named-obj-is-bad.sh: ... like this, and enhance.
* t/srcsub.sh, t/srcsub2.sh: Unify ...
* t/src-acsubst.sh: ... as this test.
* t/list-of-tests.mk: Adjust.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 14 Jun 2012 21:04:33 +0000 (23:04 +0200)]
fixup: adjust t/list-of-tests.mk for renamed/added tests
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 14 Jun 2012 20:47:28 +0000 (22:47 +0200)]
subdirs: enhance coverage, tweak and rename few tests
* t/subdir5.sh: Rename ...
* t/subdir-add-pr46.sh: ... like this.
* t/subdir8.sh: Rename ...
* t/subdir-add2-pr46.sh: ... like this.
* t/cond2.sh: Rename ...
* t/subdir-cond-err.sh: ... like this.
* t/subdir9.sh: Rename ...
* t/subdir-with-slash.sh: ... like this; improve heading comments.
* t/subcond.sh: Rename ...
* t/subdir-cond-gettext.sh: ... like this; improve m4 quoting.
* t/subcond2.sh: Rename ...
* t/subdir-am-cond.sh: ... like this; adjust heading comments.
* t/subcond3.sh: Rename ...
* t/subdir-ac-subst.sh: ... like this; adjust heading comments.
* t/subdir2.sh: Rename ...
* t/subdir-subsub.sh: ... like this; enhance so that it also runs
'./configure' and 'make'.
* t/subdir-order.sh: New test, check that the $(SUDBIRS) entries
are processed in the order they are specified.
* doc/automake.texi: Adjust references to tests.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 14 Jun 2012 14:32:47 +0000 (16:32 +0200)]
sync: update files from upstream with "make fetch"
* lib/config.guess, lib/gitlog-to-changelog, lib/texinfo.tex: Update.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Thu, 14 Jun 2012 14:30:16 +0000 (16:30 +0200)]
py-compile: consistently quote 'like this', not `like this'.
* lib/py-compile (usage_error): Here.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Tue, 12 Jun 2012 15:24:21 +0000 (17:24 +0200)]
docs: recursive make considered harmful
In the documentation, we shouldn't confuse "packages using subdirectories"
with "packages using recursive make invocations". A package can have a
careful organization in subdirectories, make no (or almost no) use of make
recursion (examples of such packages are GNU bison, GNU cppi, and Automake
itself).
In fact, make recursion should be used as seldom as possible, because it
makes the build system more brittle and dependency declarations less
faithful. See Peter Miller's article "Recursive Make Considered Harmful"
for more a more in-depth discussion:
http://miller.emu.id.au/pmiller/books/rmch/
* doc/automake.texi (Directories): Clarify how a build system based on
make recursion does. Observe that such a system, albeit being very
widespread, has its own issues and drawbacks, and that one can have a
non-recursive setup also for projects using complex directory layout.
(Recursing subdirectories): Speak of "packages that use make recursion"
rather than of "packages with subdirectories".
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Tue, 12 Jun 2012 14:12:45 +0000 (16:12 +0200)]
Merge branch 'subdirs-simplify' into maint
* subdirs-simplify:
docs: clean rules are not run in reverse order of build rules anymore
Stefano Lattarini [Tue, 12 Jun 2012 14:10:19 +0000 (16:10 +0200)]
docs: clean rules are not run in reverse order of build rules anymore
At least since commit 'v1.12.1-12-gec6a135' of 2012-06-10, "subdirs: unify
rules for "cleaning" and "normal" recursive targets"
* doc/automake.texi (Recursing subdirectories): Adjust.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Mon, 11 Jun 2012 19:39:46 +0000 (21:39 +0200)]
Merge branch 'maint'
* maint:
maintcheck: fix failures, both real and spurious
subdir tests: avoid an use of "make -j4", for portability
tests: avoid failure due to libtool quirks in C++ demo test
tests: fix spurious failures due to missing '$sleep'
subdirs: unify rules for "cleaning" and "normal" recursive targets
tests: add a "demo" test on C support
tests: look for '.lo' rather than '.o' object when using Libtool with C++
cosmetics: few typofixes in older ChangeLogs, suggested by "codespell.py"
maint: grammar fixes: s/all these/all of these/
subdir-objects: improve "make mostlyclean" efficiency and flexibility
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Mon, 11 Jun 2012 19:27:12 +0000 (21:27 +0200)]
Merge branch 'subdir-objects-pr10697' into maint
* subdir-objects-pr10697:
maintcheck: fix failures, both real and spurious
Stefano Lattarini [Mon, 11 Jun 2012 19:21:32 +0000 (21:21 +0200)]
maintcheck: fix failures, both real and spurious
* syntax-checks.mk (sc_rm_minus_f): Whitelist the
't/subobj-clean*-pr10697.sh' tests.
* t/subobj-clean-pr10697.sh: When redefining PATH,
use '$PATH_SEPARATOR', not hard-coded ':'.
* t/subobj-clean-lt-pr10697.sh: Likewise.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Stefano Lattarini [Mon, 11 Jun 2012 17:48:08 +0000 (19:48 +0200)]
tests: merged some testsuite fixlets
* fix-cxx-libtool-demo:
tests: avoid failure due to libtool quirks in C++ demo test
* subdir-objects-pr10697:
tests: fix spurious failures due to missing '$sleep'
* subdirs-simplify:
subdir tests: avoid an use of "make -j4", for portability
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
projects / platform / upstream / automake.git / log